Search Results

Search found 23946 results on 958 pages for 'remote computer'.

Page 79/958 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• Coffee spilled and went inside CPU...computer not starting

  - by Harpreet

  Today coffee got spilled over my table, and some of it (very less) reached the CPU placed under the table. I think little bit of it got inside the CPU through the front face of the CPU. As that happened the fan started running very fast and made noise. I tried to restart to see if it becomes fine, but the computer didn't start again. First it gave an error of "Alert! Air temperature sensor not detected" and didn't start. Next I tried again multiple times of starting the computer but then it gave some memory error. I was not able to start the computer. Incase there's a problem in hard disk or something related to memory, is there any way we can extract our work or data? I am scared if I am not able to extract my work in case some problem occurs like that. What options would I have? Help! EDIT: I have attached the photo here and you can see the area spilt in red circle. The hard drive electronics have been affected and internal speaker may also have been affected. Any advise on cleaning and if hard drive can work? EDIT 2: Are there any professional services offered to extract data from blemished hard disk, like this one, in case I am not able to run it personally?

  Read the article

• Computer won't go into standby

  - by Robert

  When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

  Read the article

• Single computer on network cannot connect to internet.

  - by user34630

  Hi All, I hope you can help me out! :) I have 3 computers and one device (Xbox) on my home network; 2 running XP and one on Vista. The computer that can't connect to the internet (XP) is old and failing, and shows no warning before it completely runs out of battery. Thus today, I started it up forgetting that I had unplugged it the night before, and it just ran out of battery entirely whilst I was using it and died. I think that before this I had been browsing the internet, but I can't remember for certain. (i.e. The problem I am having may or may not have been caused by this 'hard' power off). Anyway, now when I start the computer up it takes 5-10 minutes after logging on to display the start bar and icons. Also, I cannot browse the internet. The computer seems to connect to the network OK (I have tried both wired and wireless), but I can't visit sites and can't ping web addresses. Pinging the router fails, as does pinging another of my computers on the network. I have never encountered something like this before, and whilst I am no noob I am also not a sysadmin, haha. :( Any help is greatly appreciated, thank you for your time. P.S. I have tried a system restore (newbie move?).

  Read the article

• Active Directory Domain Services on remote VPS

  - by Rob Angelier

  I really need help with configuring Active Directory Domain Services on a remote VPS. Situation we have a remote Windows Server 2008R2 VPS and i just installed the Active Directory Domain Services Role. A DNS Server was also configured by default at the end of the Active Directory installation. Problem I can't get my Windows 7 machine to register itself to the domain i have just created Question What are the steps i have to take to test my Active Directory configuration, and how do i connect clients to this Domain? I can provide screenshots and more information if neccesary. looking forward to your replies! best regards, Rob Angelier

  Read the article

• Replacement for Netmeeting

  - by Jon B

  We've been using Netmeeting for doing presentations with remote workers. Now that MS has disowned it (and it doesn't run on Vista - mostly), we need something else. Since Netmeeting was free, our budget is right around $0. We don't need audio or video, but do need to share apps/desktop and allow a remote user to take control. What are some good cheap/free alternatives?

  Read the article

• Get sessions' remote IP from Teamviewer log file

  - by etuardu

  I'd like to know who has logged in to my machine and when. I have two TeamViewer log files: Connections_incoming.txt and TeamViewer7_Logfile.log. The first one is quite plain and lists, as its name says, the incoming connections to the machine, reporting the local name of the remote host, login time, logout time, and some ids. e.g.: 173274362 MYLAPTOP 20-02-2012 17:32:16 20-02-2012 17:50:42 Master RemoteControl {C5AAE483-ED0B-54B8-9235-7AE597CAD342} This is almost all what I need, but unfortunately no remote IP address is reported here, so I checked for IPs in TeamViewer7_Logfile.log but it is really messy. It indeed contains some IP addresses but I can't understand which one is bound with the items in the first log file. Is there a way to interpolate the two logs to get what I need? Should I search the second file for some particular text? What do you suggest?

  Read the article

• Setting Up Git Repository on Remote Windows Server?

  - by Goober

  I have a windows server which I can access locally or remotely over the internet through remote desktop connection, etc. I want to set up a git repository (something similar to "trunk" in subversion), that can contain a series of repositories for multiple projects. Does anyone know how I go about doing this? I want to do it using a GUI if possible. I have followed this Git Bash Tutorial but it's very long winded and not exactly what I'm after. I'm using a Git client called MSYSGIT. Using this I just want to be able to set up remote repositories and start committing source code. Any help would be greatly appreciated!

  Read the article

• Running IIS command on remote server via Powershell

  - by Paul Hunt

  I am trying to check if an IIS application pool exists on a remote server using a PowerShell script. The command I am running is: test-path "IIS:\AppPools\DefaultAppPool" If I run this script directly on the IIS server in question I get a response back of "True" so this tells me that I have IIS management correctly configure in PowerShell. However when I run the following script from a remote server I get a response of "False" invoke-command -ComputerName IISSERVER -ScriptBlock { test-path "IIS:\AppPools\DefaultAppPool" } I know that PowerShell remoting is correctly configured because I can run the following command and get a list of files invoke-command -ComputerName IISSERVER -ScriptBlock { get-childitems "c:\" } So why am I getting the wrong response about the existence of the application pool?

  Read the article

• Coffee spilled inside computer, damaged hard drive

  - by Harpreet

  Today coffee spilled over my table, and some of it (very less) reached the PC case placed under the table. I think little bit of it got inside the PC case through the front. As that happened the fan started running very fast and made noise. I tried to restart to see if it becomes fine, but the computer didn't start again. First it gave an error of "Alert! Air temperature sensor not detected" and didn't start. Next I tried again multiple times of starting the computer but then it gave some memory error. I was not able to start the computer. Incase there's a problem in hard disk or something related to memory, is there any way we can extract our work or data? I am scared if I am not able to extract my work in case some problem occurs like that. What options would I have? Help!! EDIT: I have attached the photo here and you can see the area spilt in red circle. The hard drive electronics have been affected and internal speaker may also have been affected. Any advise on cleaning and if hard drive can work? EDIT 2: Are there any professional services offered to extract data from blemished hard disk, like this one, in case I am not able to run it personally?

  Read the article

• ios7 loops on the "trust this computer" dialog

  - by gcb

  trying to transfer files to the work ipad via my debian7 box. When i plug it on the computer usb port, it shows the dialog about trusting this computer, and the computer shows a gnome alert about the ipad being locked and that i should unlock it and try again. i press "trust" on the ipad and try again on gnome. and it starts again. over and over. endlessly. there are dozen threads about this on apple support forums. no solution. just dozens of "me too" flags. e.g. https://discussions.apple.com/message/23082859#23082859 (44 me-too, 2k views) here is the log/messages i get Oct 23 21:17:39 dotmatrix kernel: [ 1928.517766] usb 2-1.7: USB disconnect, device number 16 Oct 23 21:17:39 dotmatrix kernel: [ 1928.715441] usb 2-1.7: new high-speed USB device number 17 using ehci_hcd Oct 23 21:17:40 dotmatrix kernel: [ 1928.811031] usb 2-1.7: New USB device found, idVendor=05ac, idProduct=12ab Oct 23 21:17:40 dotmatrix kernel: [ 1928.811036] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 23 21:17:40 dotmatrix kernel: [ 1928.811039] usb 2-1.7: Product: iPad Oct 23 21:17:40 dotmatrix kernel: [ 1928.811041] usb 2-1.7: Manufacturer: Apple Inc. Oct 23 21:17:40 dotmatrix kernel: [ 1928.811043] usb 2-1.7: SerialNumber: fec5e0f6a6fa18a936de3c53af661051d290275e Oct 23 21:17:40 dotmatrix mtp-probe: checking bus 2, device 17: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7" Oct 23 21:17:40 dotmatrix mtp-probe: bus: 2, device: 17 was not an MTP device Oct 23 21:17:43 dotmatrix kernel: [ 1932.346505] usb 2-1.7: USB disconnect, device number 17 If i never press the trust dialog it will stay there until i remove the cable. but the logs shows that it gave up 3sec after the cable was connected.

  Read the article

• Computer turns itself on after any off mode

  - by Patrick

  Whenever I shut down my computer, or put it in sleep/hybernate, it turns on after two seconds. It doesn't post, it just powers on and then idles. To actually turn it off, I switch off the psu. The problem is now, whenever I switch the psu on and try to boot, it doesn't always turn on. It takes a good amount of flicking the psu switch on and off before the motherboard lights up. So far I've determined the things its not: its not caused by the mouse or network waking up the computer. I've been able to go into hybernate for the past year. And all "wake on X" settings in the bios are diabled. its not a scheduled task waking up the computer at a given hour, it occurs every single time its not due to an upgrade or new installation, since I haven't done either in a very long time I'm sure its a hardware issue. So I'd like to know, is my psu dead, or the motherboard? The psu is an Antec Earthwatts 600w, the motherboard is an Asus P5Q-E, both one year old.

  Read the article

• Windows Server 2003 AD User Properties Environment doesn't override end user Remote Desktop Client s

  - by caleban

  Windows Server 2003 Domain Controller and Windows XP workstations: Active Directory Users and Computers/Users/User/Properties/Environment/Client devices Connect client drives at logon Connect client printers at logon Shouldn't the above Terminal Services settings in Active Directory override the end user Remote Desktop client settings? In our environment the end user Remote Desktop Client settings take precedence. If printing is disabled on the client but enabled in the user's AD profile then printing is not available. Is this working by design or can I change something to allow the user environment settings in AD to override the end user settings RDC settings?

  Read the article

• How to backup a remote VPS machine?

  - by morpheous

  I am considering opting for a VPS solution, with the server running Ubuntu server. I am pretty new to this, and I need to come up with a backup policy for my server data. Initial data is likely to be about 80Mb, and I expect the data to grow at approximately 5Mb to 10 Mb a day. Can anyone recommend: A backup/restore policy (best practises for a small startup) Which tools to use for backup? Another thing that is not clear to me is - where are the files backed up to normally (in the case of remote servers). If the files are backed up to the same machine (or even to another machine but with the same host), there is potentially, a single point of failure). How do people normally backup their server data, and is the probability of machine meltdown or the host company server farm "catching fire" so remote as not to be worth worrying about - especially for a small (read one man) startup like me?

  Read the article

• MySQL Database synchronizing with local and remote with c#

  - by Neo

  I've posted this here as its more of a mysql questions than c#, I have written some software that runs a local instance of mysql when it first starts, now once mysql is up I would like to synchronize the data between the remote database table and the local database table that the software runs (it shouldn't sync any other databases / tables as there are a lot). I have replication setup to synchronize the entire database to another server which works unless the server goes down then it never comes back up, so based on that I don't think replication will work as when the software is closed it also closes MySQL. So what would be the best method of synchronizing the remote and local databases?

  Read the article

• What's problem with multi monitor usage in rdc7?

  - by e-turhan

  Hello, I want to use dual monitors with remote desktop on windows 7 ultimate. Host machine is win server 2008 r2. I open the run window type mstsc /multimon and press enter, also "use all my monitors for the remote session" is checked.By this way RDC is opening but only in one monitor.Do I need to do any changes on host too? I have tried /span attribute and it worked but I don't want it.

  Read the article

• MySQL - allow connection from remote machine as root user

  - by Senthil Kumar

  Hi all, When I installed MySQL server in Windows, there was an option "Allow root connection from remote machine". I checked that option and I had no probs when using it. I installed MySQL server in Ubuntu 9.04 using apt-get install. I can connect to the sql server from the same machine but when I try to connect from a virtual machine, it doesn't work. My guess is that I should allow root connection from remote machine. How to do that?

  Read the article

• Get all DNS records on remote server?

  - by Choor

  Is it possible to get all DNS records off a remote server?

  Read the article

• Kiosk view of remote machine X11vnc

  - by Swapnil

  I need to connect to a remote machine through vnc viewer applet embedded in a webpage. The remote machine will host a program running on the desktop connected through the viewer. I need to enable the viewers to view only the running application program without access to any other feature such as the desktop and/or the task bar. How can I achieve this? BTW, I am experimenting with x11vnc -id, -sid command options, but got no desired view. Please help as I am in a bit urgency.

  Read the article

• X11 display over ssh with monitor connected to remote machine

  - by Sumit

  I have the following setup: Machine A (a.corp, 192.168.100.130, local machine) and Machine B (b.corp, remote machine) and a monitor is connected to each of these machines. When I ssh from a.corp to b.corp as $ ssh -X b.corp $ xclock Error: Can't open display: I tried setting the DISPLAY variable as $ ssh -X b.corp $ export DISPLAY=`echo $SSH_CLIENT|cut -f1 -d\ `:0.0 $ echo $DISPLAY 192.168.100.130:0.0 $ xclock xclock's display opens up but on the monitor connected to b.corp (remote machine) and not on the monitor connected to a.corp (local machine). Is there a way to force the display to appear on the monitor of the local machine (a.corp)?

  Read the article

• Computer does not boot after ram upgrade

  - by Calmarius

  I have a Dell Optiplex GX520 desktop (it's abount 5 yr old) PC with 512 MB DDR2 RAM. Since my computer always swapping I thought I should upgrade my RAM. I bought a Kingmax 2GB DDR2 RAM. But my system does not boot. The status leds are on 2 and 4. The user manual says 'video card failure' wtf? I put back the original module and everything works. I tried many combinations. When I leave the old 512 RAM in and put the 2GB next to it to the other socket my system completes the POST and I'm able to enter the BIOS menu. It says my system has 2.5 GB installed, one 0.5GB and one 2GB in dual asymmetric channel mode. It's seemingly right. Exiting the BIOS setup GRUB loads successfully, but when I try to boot Ubuntu it crashes with kernel panic immediately. Trying to load Windows XP does not get past the loading screen, it crashes with 0x8E stop error. Does this mean the ram I bought is faulty? Or is it just mean that the memory module I bought is too new to be handled my computer? I this case I may exchange the RAM with my friends. No other computer is in my house (my very old box has DDR1 ram, my systers new box has DDR3 ones. I can't plug my memory in neither one.) I'm going to return the RAM to store to replace it with a better one tomorrow. Is there any hope to get this new module work?

  Read the article

• Installing CentOS on remote machine.

  - by vijay.shad

  Hi, Can I do a fresh install of centos linux distribution on a remote machine? I have got a machine with windows NT system in a remote location. Now i want to use that system as my deployment machine. To proceed on my plan i need to install a linux os(have chosen CentOS). The guy with machine there is not very much aware of the installation process of any OS. So i thought of the remotely install. Please give me some insight how can i achieve this?

  Read the article

• Remote location looses connectivity

  - by user24559

  I have a remote location that has constant internet access using DSL. The remote location only has three Linksys cameras that use the internet access with a router. There is no computer on the network. The router is configured to use the DYN.org service to keep the IP address updated if the internet provider assigns a new ip address. The problem I am having is the router after a period of time stops responding to incoming ping requests and the cameras are shown offline. However, if I keep one of the cameras constantly streaming data then the connection to all the cameras works just fine all the time. How can I keep the router from appearing to be sleeping and not responding to incoming requests? The router is the Linksys WRT300N.

  Read the article

• VPN: What should my Gateway remote ID be?

  - by Lynn Owens

  I have a Netgear ProSafe UTM. I set the Gateway local ID to it's WAN IP. But I'm not sure what to put for it's Remote ID. I want to be able to connect to it from a laptop across the internet. I can chose between: Remote IP FQDN Client FQDN Cert DN Frankly I've tried them messing around with them all but I'm just shooting in the dark, and the help desk docs are worthless. Also, Googling around seems to end up with lots of pages not really related to what I want. A lot of pages on configuring Cisco or Windows home networking or privacy advocates.

  Read the article

• Unlock file on Windows Server 2003 by remote desktop without rebooting

  - by BalusC

  We've several Windows Server 2003 machines running, each with its own purposes. There are scheduled jobs which synchronizes some files over SFTP using WinSCP. Very sometimes a newly copied file is left locked in the "inbox" folder without any reason. The machine's own background task (programmed in Java) can't move it to the "processed" folder anymore after processing it. Manually moving it only yields the well known error message Cannot move [filename]: it is being used by another person or program. The only resort is to reboot the machine, but we would of course like to avoid that. Any suggestions? I tried Unlocker which works fine locally at WinXP, but doesn't work at those Win2K3 machines by remote desktop (unlock option doesn't show up in rightclick context menu). I tried Process Explorer as well as described in this blog article, but it caused the server to crash (not sure if that's because it's executed through remote desktop).

  Read the article

• Remote kill, upload, execute file

  - by Masoud M.

  I'm developing a program and I need to upload my xyz.exe file to many host machines and execute them frequently. I need a server-client tool to do it as below steps after an update signal from my PC: Those host machine should kill any running processes with name xyz.exe. Download my new xyz.exe. Then execute new xyz.exe. I know about some tools like PsExec, but I need a tools with better user-interface and more powerful. Is there any tool to do it ? UPDATE: The systems are in a same LAN, OS is windows (XP or 7), No full remote access is needed. I'm a developer and my program should run in remote hosts and I'm testing my application.

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >