Search Results

Search found 12569 results on 503 pages for 'root plist'.

Page 79/503 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• External USB 3 drive not recognized

  - by ilan123

  Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

  Read the article

• 'sudo su -' vs 'sudo -i' vs 'sudo /bin/bash' - when does it matter which is used, or does it matter at all?

  - by Paul

  When I'm doing something that requires root be typed in dozens of times in a row, I prefer to switch my session to a root session. In the various tutorials and instructions I have used on the Internet, I see sudo su, sudo su -, sudo -i and sudo /bin/bash being used to open a root session, but I'm not clear on the difference between these and when or if that difference matters. Can someone clear this up for me?

  Read the article

• Ubuntu doesn't see my phone (Sony Xperia Tipo)

  - by ola

  When I connect my phone Xperia Tipo to my Ubuntu 12.04, the USB icon does not appear in a launcher. lsusb gives me following results: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 8086:0189 Intel Corp. Bus 001 Device 004: ID 1bcf:2880 Sunplus Innovation Technology Inc. Bus 003 Device 003: ID 0fce:5170 Sony Ericsson Mobile Communications AB I installed Wammu and it does not see phone either: Wammu is now searching for phone: All finished, found 0 phones No phone has been found! On the phone I have debbugging turned on and it sees Ubuntu. Can I ask for instruction step by step? I am a begginer on Ubuntu.

  Read the article

• Write to windows share

  - by aidan

  I used to mount a windows share in Ubuntu server, with an entry in fstab: //data/SharedFolder /media/SharedFolder/ smbfs user,defaults,credentials=/root/.creds,uid=root,gid=root 0 0 /root/.creds is a text file with three lines, my username, password and domain. Users on the ubuntu server could write to this mount, but then I upgraded to 10.04 and now only root can write. Regular users can still read though. mount currently tells me: //data/SharedFolder on /media/SharedFolder type cifs (rw,mand,noexec,nosuid,nodev) How do I make it world writeable again? Thanks

  Read the article

• Wacom board not detected

  - by Christer

  Board is not detected by the system settings, ubuntu 11.10 uname -r 3.0.0-13-generic-pae Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver Bus 002 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 003 Device 003: ID 056a:00df Wacom Co., Ltd Bus 002 Device 004: ID 03f0:0601 Hewlett-Packard ScanJet 6300c Bus 002 Device 005: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port Bus 002 Device 006: ID 0409:0056 NEC Corp. lsmod | grep wacom try to autogen driver input-wacom-0.11.1 from git, but fails with configure: WARNING: kernel version 3.0.0-13-generic-pae not supported Anyone have a solution ?

  Read the article

• Backspace key not working

  - by Adi

  I have two keyborad keys, "Back" and "Forward". Forward works like it should, here is the output from xev for it: KeyPress event, serial 36, synthetic NO, window 0x4600001, root 0x175, subw 0x0, time 16491048, (21,-17), root:(771,35), state 0x10, keycode 167 (keysym 0x1008ff27, XF86Forward), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4600001, root 0x175, subw 0x0, time 16491272, (21,-17), root:(771,35), state 0x10, keycode 167 (keysym 0x1008ff27, XF86Forward), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False Back on the other hand gives this from xev FocusOut event, serial 36, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 36, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 36, synthetic NO, window 0x0, keys: 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Can someone help me make Back work? I don't understand why X generats Focus events for it..

  Read the article

• Wireless not working on Dell Inspirion 1501 after upgrading to Ubuntu 12.04 tried steps in other threads

  - by mark burton

  I updated to Ubuntu 12.04 and now my wireless is not working. No icon for it. Tried some of the troubleshooting in other threads but can't get it to work. Would really appreciate any help Thanks! " *-network description: Network controller product: BCM4311 802.11a/b/g vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 02 serial: 00:19:b9:5c:d1:52 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=10.0.0.6 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff " lsub results Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver $ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) 00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) 00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) 00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS482 [Radeon Xpress 200M] 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11a/b/g (rev 01) 08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 08:01.0 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 01) rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• How to fix boot and mount failed drops to initramfs prompt in Ubuntu 12.04?

  - by msPeachy

  Ubuntu partition does not boot. This started after a power interruption during system boot. The next time I boot, I encountered the following error message: mount: mounting /dev/disk/by-uuid/3f7f5cd9d-6ea3-4da7-b5ec-**** on /root failed: Invalid argument mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target file system doesn't have /sbin/init. No init found. Try passing init= bootarg. Busybox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) _ I've searched for similar posts here and most of the recommended solution is to reboot to the Ubuntu LiveCD. That's another problem because I cannot boot to a LIVEUSB, this is the error message I get when booting to a LiveUSB: Busybox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) mount: mounting /dev/sda2 on /isodevice failed: Invalid argument Could not find the ISO /ubuntu-12.04-desktop-i386.iso. This could also happen if the file system is not clean because of an operating system crash, an interrupted boot process, an improper shutdown, or unplugging of a removable device without first unmounting or ejecting it. To fix this, simply reboot into Windows, let it fully start, log in, run 'chkdsk /r', then gracefully shut down and reboot back into Windows. After this you should be able to reboot again and resume the installation. I cannot boot into Windows because I don't have a Windows partition. Do I have to install Windows to fix this problem? Is there a way to fix this in the (initramfs) prompt? Please help. Thank you!

  Read the article

• Microsoft IntelliMouse episodic pauses

  - by Rob Hills

  I have a Microsoft IntelliMouse connected via USB to a computer (directly, NOT via hub) currently running Ubuntu 11.10, but this problem also existed before we upgraded from 10.10. Every now and then (apparently randomly) the computer "pauses" for anything up to a few seconds. This usually occurs after a mouse movement and during the pause, the computer is completely unresponsive to mouse or keyboard. lsusb shows: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0409:0058 NEC Corp. HighSpeed Hub Bus 001 Device 004: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 013: ID 045e:001e Microsoft Corp. IntelliMouse Explorer Bus 001 Device 005: ID 04a9:1097 Canon, Inc. PIXMA iP5000 Bus 001 Device 006: ID 0a5c:200a Broadcom Corp. Bluetooth dongle Bus 001 Device 007: ID 0911:1c57 Philips Speech Processing Bus 001 Device 008: ID 04a9:2219 Canon, Inc. CanoScan 9950F so the mouse appears to be correctly identified. Syslog episodically shows the following sequence: Jan 15 11:48:32 kayes-computer kernel: [10588.512036] usb 3-1: USB disconnect, device number 10 Jan 15 11:48:33 kayes-computer kernel: [10589.248026] usb 3-1: new low speed USB device number 11 using uhci_hcd Jan 15 11:48:33 kayes-computer mtp-probe: checking bus 3, device 11: "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1" Jan 15 11:48:33 kayes-computer kernel: [10589.448596] input: Microsoft Microsoft IntelliMouse® Explorer as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input11 Jan 15 11:48:33 kayes-computer kernel: [10589.448706] generic-usb 0003:045E:001E.000B: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.1-1/input0 Jan 15 11:48:33 kayes-computer mtp-probe: bus: 3, device: 11 was not an MTP device though I can't confirm if these are directly associated with the "pauses". Any thoughts on what might be causing this or what else I can do to diagnose the problem?

  Read the article

• jtreg update, December 2012

  - by jjg

  There is a new version of jtreg available. The primary new feature is support for tests that have been written for use with TestNG, the popular open source testing framework. TestNG is supported by a variety of tools and plugins, which means that it is now possible to develop tests for OpenJDK using those tools, while still retaining the ability to have the tests be part of the OpenJDK test suite, and run with a single test harness, jtreg. jtreg can be downloaded from the OpenJDK jtreg page: http://openjdk.java.net/jtreg. TestNG support jtreg supports both single TestNG tests, which can be freely intermixed with other types of jtreg tests, and groups of TestNG tests. A single TestNG test class can be compiled and run by providing a test description using the new action tag: @run testng classname The test will be executed by using org.testng.TestNG. No main method is required. A group of TestNG tests organized in a standard package hierarchy can also be compiled and run by jtreg. Any such group must be identified by specifying the root directory of the package hierarchy. You can either do this in the top level TEST.ROOT file, or in a TEST.properties file in any subdirectory enclosing the group of tests. In either case, add a line to the file of the form: TestNG.dirs = dir ... Directories beginning with '/' are evaluated relative to the root directory of the test suite; otherwise they are evaluated relative to the directory containing the declaring file. In particular, note that you can simply use "TestNG.dirs = ." in a TEST.properties file in the root directory of the test group's package hierarchy. No additional test descriptions are necessary, but test descriptions containing information tags, such as @bug, @summary, etc are permitted. All the Java source files in the group will be compiled if necessary, before any of the tests in the group are run. The selected tests within the group will be run, one at a time, using org.testng.TestNG. Library classes The specification for the @library tag has been extended so that any paths beginning with '/' will be evaluated relative to the root directory of the test suite. In addition, some bugs have been fixed that prevented sharing the compiled versions of library classes between tests in different directories. Note: This has uncovered some issues in tests that use a combination of @build and @library tags, such that some tests may fail unexpectedly with ClassNotFoundException. The workaround for now is to ensure that library classes are listed before the test classes in any @build tags. To specify one or more library directories for a group of TestNG tests, add a line of the following form to the TEST.properties file in the root directory of the group's package hierarchy: lib.dirs = dir ... As before, directories beginning with '/' are evaluated relative to the root directory of the test suite; otherwise they are evaluated relative to the directory containing the declaring file. The libraries will be available to all classes in the group; you cannot specify different libraries for different tests within the group. Coming soon ... From this point on, jtreg development will be using the new jtreg repository in the OpenJDK code-tools project. There is a new email alias jtreg-dev at openjdk.java.net for discussions about jtreg development. The existing alias jtreg-use at openjdk.java.net will continue to be available for questions about using jtreg. For more information ... An updated version of the jtreg Tag Language Specification is being prepared, and will be made available when it is ready. In the meantime, you can find more information about the support for TestNG by executing the following command: $ jtreg -onlinehelp TestNG For more information on TestNG itself, visit testng.org.

  Read the article

• What's the best structure for a repository?

  - by jpmelos

  I've looked into many open source software repositories, and I've found some common elements and somethings people do in different fashion from one another. For example, every repository has a README file, a INSTALL file, a COPYING file and stuff like that. Other things differ: Some projects, like git, have their source code in the root level, while others have the source code in a src/ folder and others, like the Linux kernel, have the source code spread in different folders in root level, that divide code by areas; Some have their tests in a t/ folder, while others in a tests/ folder, or named otherwise; Some have files about submitting patches and who the maintainers are, and those might be inside some Documentation/ or in the root level. Are there recommendations? A best practice? For example: personally, I don't like the code in the root level, git-fashion. It looks messy and confuses one trying to start as a contributor (especially because they have some code inside folders, and scripts in the root level as well, it's really messy). If I were to start a project of my own and wanted to start right from the start, are there recommendations? Best practices? How can I make a clean and clear structure? Thank you!

  Read the article

• SSH and Active Directory authentication

  - by disserman

  Is it possible to set up Linux (and Solaris) SSH server to authenticate users in this way: i.e. user john is a member of the group Project1_Developers in the Active Directory. we have something on the server A (running Linux, the server has an access to the AD via i.e. LDAP) in the SSH server LDAP (or other module) authentication config like root=Project1_Developers,Company_NIX_Admins. when john connects to the server A using his username "john" and domain password, the server checks the john's group in the domain and if the group is "Project1_Developers" or "Company_NIX_Admins", makes him locally as a root with a root privileges. The idea is also to have only a "root" and a system users on the server, without adding user "john" to all servers where John can log in. Any help or the idea how to make the above or something similar to the above? Preferred using AD but any other similar solution is also possible. p.s. please don't open a discussions is it secure to login via ssh as root or not, thanks :)

  Read the article

• How do I connect Ubuntu to Sony Bravia LED TV via HDMI?

  - by VedVals

  My laptop connects to 46" Sony Bravia LED TV using HDMI cable in Windows without any problem. However, it just doesn't work with Ubuntu 12.04. It always says No Signal. Problem somewhat persists after upgrading to 13.04. Bravia detects my laptop as a connection now but I am unable to display anything. What drivers/applications should I install to connect via HDMI? Output of sudo lspci -nn : 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 525M] [10de:0df5] (rev ff) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)

  Read the article

• Why isn't cron running my script?

  - by Jingqiang Zhang

  Now I want to use Backup and Whenever gem to automatic backup my database. When I connect the server by ssh as an added user to run backup perform -t my_backup,it works well.But the cron file: 0 22 * * * /bin/bash -l -c 'backup perform -t my_backup' can't run at 22:00. When I use cat /etc/crontab check the cron's config file,it is: SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # m h dom mon dow user command 17 * * * * root cd / && run-parts --report /etc/cron.hourly 25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) # The /bin/bash and /bin/sh are different.What's the reason?How to do?

  Read the article

• Artec TV18R Tuner not working :(

  - by Antillar Maximus

  Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

  Read the article

• Unable to enumerate USB device

  - by takeshin

  Hello, My syslog is constantly filled with messages like this: Oct 16 11:48:35 my-laptop kernel: [61470.980078] hub 1-0:1.0: unable to enumerate USB device on port 2 Oct 16 11:48:35 my-laptop kernel: [61471.192079] hub 3-0:1.0: unable to enumerate USB device on port 2 The only USB device I use is Microsoft Natural Wireless Laser Mouse 7000. The laptop model is HP dv9500, Ubuntu 10.10, but the same was in the versions before. How can I fix this? Edit: Here's the output of sudo lsusb: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 045e:071d Microsoft Corp. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub All USB devices seems to be working fine. I have some problems with DVD-R and sound card, but they are not USB.

  Read the article

• Visual Tree Enumeration

  - by codingbloke

  I feel compelled to post this blog because I find I’m repeatedly posting this same code in silverlight and windows-phone-7 answers in Stackoverflow. One common task that we feel we need to do is burrow into the visual tree in a Silverlight or Windows Phone 7 application (actually more recently I found myself doing this in WPF as well).  This allows access to details that aren’t exposed directly by some controls.  A good example of this sort of requirement is found in the “Restoring exact scroll position of a listbox in Windows Phone 7”  question on stackoverflow.  This required that the scroll position of the scroll viewer internal to a listbox be accessed. A caveat One caveat here is that we should seriously challenge the need for this burrowing since it may indicate that there is a design problem.  Burrowing into the visual tree or indeed burrowing out to containing ancestors could represent significant coupling between module boundaries and that generally isn’t a good idea. Why isn’t this idea just not cast aside as a no-no?  Well the whole concept of a “Templated Control”, which are in extensive use in these applications, opens the coupling between the content of the visual tree and the internal code of a control.   For example, I can completely change the appearance and positioning of elements that make up a ComboBox.  The ComboBox control relies on specific template parts having set names of a specified type being present in my template.  Rightly or wrongly this does kind of give license to writing code that has similar coupling. Hasn’t this been done already? Yes it has.  There are number of blogs already out there with similar solutions.  In fact if you are using Silverlight toolkit the VisualTreeExtensions class already provides this feature.  However I prefer my specific code because of the simplicity principle I hold to.  Only write the minimum code necessary to give all the features needed.  In this case I add just two extension methods Ancestors and Descendents, note I don’t bother with “Get” or “Visual” prefixes.  Also I haven’t added Parent or Children methods nor additional “AndSelf” methods because all but Children is achievable with the addition of some other Linq methods.  I decided to give Descendents an additional overload for depth hence a depth of 1 is equivalent to Children but this overload is a little more flexible than simply Children. So here is the code:- VisualTreeEnumeration public static class VisualTreeEnumeration {     public static IEnumerable<DependencyObject> Descendents(this DependencyObject root, int depth)     {         int count = VisualTreeHelper.GetChildrenCount(root);         for (int i = 0; i < count; i++)         {             var child = VisualTreeHelper.GetChild(root, i);             yield return child;             if (depth > 0)             {                 foreach (var descendent in Descendents(child, --depth))                     yield return descendent;             }         }     }     public static IEnumerable<DependencyObject> Descendents(this DependencyObject root)     {         return Descendents(root, Int32.MaxValue);     }     public static IEnumerable<DependencyObject> Ancestors(this DependencyObject root)     {         DependencyObject current = VisualTreeHelper.GetParent(root);         while (current != null)         {             yield return current;             current = VisualTreeHelper.GetParent(current);         }     } }   Usage examples The following are some examples of how to combine the above extension methods with Linq to generate the other axis scenarios that tree traversal code might require. Missing Axis Scenarios var parent = control.Ancestors().Take(1).FirstOrDefault(); var children = control.Descendents(1); var previousSiblings = control.Ancestors().Take(1)     .SelectMany(p => p.Descendents(1).TakeWhile(c => c != control)); var followingSiblings = control.Ancestors().Take(1)     .SelectMany(p => p.Descendents(1).SkipWhile(c => c != control).Skip(1)); var ancestorsAndSelf = Enumerable.Repeat((DependencyObject)control, 1)     .Concat(control.Ancestors()); var descendentsAndSelf = Enumerable.Repeat((DependencyObject)control, 1)     .Concat(control.Descendents()); You might ask why I don’t just include these in the VisualTreeEnumerator.  I don’t on the principle of only including code that is actually needed.  If you find that one or more of the above  is needed in your code then go ahead and create additional methods.  One of the downsides to Extension methods is that they can make finding the method you actually want in intellisense harder. Here are some real world usage scenarios for these methods:- Real World Scenarios //Gets the internal scrollviewer of a ListBox ScrollViewer sv = someListBox.Descendents().OfType<ScrollViewer>().FirstOrDefault(); // Get all text boxes in current UserControl:- var textBoxes = this.Descendents().OfType<TextBox>(); // All UIElement direct children of the layout root grid:- var topLevelElements = LayoutRoot.Descendents(0).OfType<UIElement>(); // Find the containing `ListBoxItem` for a UIElement:- var container = elem.Ancestors().OfType<ListBoxItem>().FirstOrDefault(); // Seek a button with the name "PinkElephants" even if outside of the current Namescope:- var pinkElephantsButton = this.Descendents()     .OfType<Button>()     .FirstOrDefault(b => b.Name == "PinkElephants"); //Clear all checkboxes with the name "Selector" in a Treeview foreach (CheckBox checkBox in elem.Descendents()     .OfType<CheckBox>().Where(c => c.Name == "Selector")) {     checkBox.IsChecked = false; }   The last couple of examples above demonstrate a common requirement of finding controls that have a specific name.  FindName will often not find these controls because they exist in a different namescope. Hope you find this useful, if not I’m just glad to be able to link to this blog in future stackoverflow answers.

  Read the article

• Create and use intermediate certificate authority on Windows Server 2012?

  - by Sid

  Background: Server OS is Windows Server 2012. GUI is installed as we come upto speed with powershell. Setup is staging, not production (yet). We have our (internal, domain limited) Root CA installed. I would like to take the Root CA offline to secure storage but before that I'd like to setup an intermediate CA which can take over actual live, online (int-RA-net) functionality Can someone guide me covering: creating the intermediate CA certificate request installing the intermediate CA certificate on domain controller (certification authority role already installed with Root CA online right now) use the intermediate CA to generate a certificate (any use certificate, just for demonstration purposes) Obviously this certification chain would be invalid on computers outside our domain (self trusted root - our root certificate is NOT from common 3rd parties). This last point is NOT a problem.

  Read the article

• Kernel module compilation fails when installing vmware tools

  - by nekooee

  When I install WMWare tools, I get this error for vmhgfs: /tmp/vmware-root/modules/vmhgfs-only/filesystem.c:47:28: fatal error: linux/smp_lock.h: No such file or directory compilation terminated. compilation terminated. make[2]: *** [/tmp/vmware-root/modules/vmhgfs-only/filesystem.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmhgfs-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.0.0-12-generic' make: *** [vmhgfs.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only' If you wish to have the shared folders feature, you can install the driver by running vmware-config-tools.pl again after making sure that gcc, binutils, make and the kernel sources for your running kernel are installed on your machine. These packages are available on your distribution's installation CD. And /mnt/hgfs is empty when sharing. If I run vmware-hgfsclient in a terminal, I get the list of shared folders but /mnt/hgfs is empty.

  Read the article

• Random process hangs after clean install

  - by Toshe

  After installing fresh Kubuntu 11.04 Natty on my desktop PC, I experienced some issues with application and process hangs. There is also a problem with my USB 3 hard disk. These sort of problems did not happen on Kubuntu 10.10 installed on the same PC (on separate partition). The hangs manifest themselves with kernel log messages like these: [ 960.480151] INFO: task amarok:2505 blocked for more than 120 seconds. [ 960.480153] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 960.480155] amarok D 0000000000000000 0 2505 1 0x00000000 [ 960.480158] ffff8800a556bb38 0000000000000086 ffff8800a556bfd8 ffff8800a556a000 [ 960.480162] 0000000000013d00 ffff8800cb7f3178 ffff8800a556bfd8 0000000000013d00 [ 960.480165] ffffffff81a0b020 ffff8800cb7f2dc0 ffffea000242ac58 ffff88012704c870 [ 960.480169] Call Trace: [ 960.480172] [<ffffffff815c19f7>] __mutex_lock_slowpath+0xf7/0x180 [ 960.480175] [<ffffffff815c144b>] mutex_lock+0x2b/0x50 [ 960.480180] [<ffffffffa0d0ad42>] video_open+0x102/0x400 [cx8800] [ 960.480183] [<ffffffff815c2cbe>] ? _raw_spin_lock+0xe/0x20 [ 960.480186] [<ffffffff8117c55d>] ? __d_lookup+0x10d/0x170 [ 960.480191] [<ffffffffa0ca0731>] v4l2_open+0x101/0x130 [videodev] [ 960.480194] [<ffffffff81168f4a>] chrdev_open+0xda/0x1f0 [ 960.480197] [<ffffffff81168e70>] ? chrdev_open+0x0/0x1f0 [ 960.480200] [<ffffffff81162cee>] __dentry_open+0xce/0x2f0 [ 960.480202] [<ffffffff8116ef33>] ? generic_permission+0x23/0xc0 [ 960.480205] [<ffffffff811641e1>] nameidata_to_filp+0x71/0x80 [ 960.480208] [<ffffffff811733c8>] finish_open+0xc8/0x1b0 [ 960.480210] [<ffffffff811725b7>] ? do_path_lookup+0x87/0x160 [ 960.480213] [<ffffffff81173b88>] do_filp_open+0x2c8/0x7c0 [ 960.480216] [<ffffffff81172902>] ? user_path_at+0x62/0xa0 [ 960.480219] [<ffffffff81131d4d>] ? handle_mm_fault+0x16d/0x250 [ 960.480222] [<ffffffff812e6c47>] ? __strncpy_from_user+0x27/0x60 [ 960.480225] [<ffffffff81180ea7>] ? alloc_fd+0xf7/0x150 [ 960.480228] [<ffffffff8116425a>] do_sys_open+0x6a/0x150 [ 960.480230] [<ffffffff81164360>] sys_open+0x20/0x30 [ 960.480233] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b [ 1080.480027] INFO: task knotify4:1663 blocked for more than 120 seconds. [ 1080.480030] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1080.480032] knotify4 D 0000000000000000 0 1663 1 0x00000000 [ 1080.480036] ffff880123a2bb28 0000000000000082 ffff880123a2bfd8 ffff880123a2a000 [ 1080.480040] 0000000000013d00 ffff880121003178 ffff880123a2bfd8 0000000000013d00 [ 1080.480044] ffff8800cb7e16e0 ffff880121002dc0 ffffffff81060a27 ffff88012704c870 [ 1080.480048] Call Trace: [ 1080.480054] [<ffffffff81060a27>] ? mutex_spin_on_owner+0x97/0xd0 [ 1080.480059] [<ffffffff815c19f7>] __mutex_lock_slowpath+0xf7/0x180 [ 1080.480069] [<ffffffff812e4f61>] ? vsnprintf+0x221/0x620 [ 1080.480072] [<ffffffff815c144b>] mutex_lock+0x2b/0x50 [ 1080.480076] [<ffffffffa0b2d10f>] cx8802_request_acquire+0x5f/0xf0 [cx8802] [ 1080.480081] [<ffffffffa0e87e08>] mpeg_open+0x78/0x270 [cx88_blackbird] [ 1080.480084] [<ffffffff8117c55d>] ? __d_lookup+0x10d/0x170 [ 1080.480092] [<ffffffffa0ca0731>] v4l2_open+0x101/0x130 [videodev] [ 1080.480096] [<ffffffff81168f4a>] chrdev_open+0xda/0x1f0 [ 1080.480099] [<ffffffff81168e70>] ? chrdev_open+0x0/0x1f0 [ 1080.480102] [<ffffffff81162cee>] __dentry_open+0xce/0x2f0 [ 1080.480105] [<ffffffff8116ef33>] ? generic_permission+0x23/0xc0 [ 1080.480108] [<ffffffff811641e1>] nameidata_to_filp+0x71/0x80 [ 1080.480111] [<ffffffff811733c8>] finish_open+0xc8/0x1b0 [ 1080.480113] [<ffffffff811725b7>] ? do_path_lookup+0x87/0x160 [ 1080.480116] [<ffffffff81173b88>] do_filp_open+0x2c8/0x7c0 [ 1080.480119] [<ffffffff81172902>] ? user_path_at+0x62/0xa0 [ 1080.480122] [<ffffffff811663f1>] ? get_empty_filp+0xa1/0x170 [ 1080.480125] [<ffffffff812e6c47>] ? __strncpy_from_user+0x27/0x60 [ 1080.480128] [<ffffffff81180ea7>] ? alloc_fd+0xf7/0x150 [ 1080.480131] [<ffffffff8116425a>] do_sys_open+0x6a/0x150 [ 1080.480134] [<ffffffff81164360>] sys_open+0x20/0x30 [ 1080.480137] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b [ 1080.480147] INFO: task dolphin:1842 blocked for more than 120 seconds. [ 1080.480148] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1080.480150] dolphin D 0000000000000000 0 1842 1 0x00000004 [ 1080.480154] ffff8800cb4f3b38 0000000000000082 ffff8800cb4f3fd8 ffff8800cb4f2000 [ 1080.480157] 0000000000013d00 ffff8800cb7f4858 ffff8800cb4f3fd8 0000000000013d00 [ 1080.480161] ffffffff81a0b020 ffff8800cb7f44a0 ffffea000267b0d0 ffff88012704c870 [ 1080.480164] Call Trace: [ 1080.480168] [<ffffffff815c19f7>] __mutex_lock_slowpath+0xf7/0x180 [ 1080.480171] [<ffffffff815c144b>] mutex_lock+0x2b/0x50 [ 1080.480176] [<ffffffffa0d0ad42>] video_open+0x102/0x400 [cx8800] [ 1080.480179] [<ffffffff815c2cbe>] ? _raw_spin_lock+0xe/0x20 [ 1080.480181] [<ffffffff8117c55d>] ? __d_lookup+0x10d/0x170 [ 1080.480186] [<ffffffffa0ca0731>] v4l2_open+0x101/0x130 [videodev] [ 1080.480190] [<ffffffff81168f4a>] chrdev_open+0xda/0x1f0 [ 1080.480192] [<ffffffff81168e70>] ? chrdev_open+0x0/0x1f0 [ 1080.480195] [<ffffffff81162cee>] __dentry_open+0xce/0x2f0 [ 1080.480198] [<ffffffff8116ef33>] ? generic_permission+0x23/0xc0 [ 1080.480200] [<ffffffff811641e1>] nameidata_to_filp+0x71/0x80 [ 1080.480203] [<ffffffff811733c8>] finish_open+0xc8/0x1b0 [ 1080.480206] [<ffffffff811725b7>] ? do_path_lookup+0x87/0x160 [ 1080.480208] [<ffffffff81173b88>] do_filp_open+0x2c8/0x7c0 [ 1080.480211] [<ffffffff81172902>] ? user_path_at+0x62/0xa0 [ 1080.480214] [<ffffffff81131d4d>] ? handle_mm_fault+0x16d/0x250 [ 1080.480217] [<ffffffff812e6c47>] ? __strncpy_from_user+0x27/0x60 [ 1080.480220] [<ffffffff81180ea7>] ? alloc_fd+0xf7/0x150 [ 1080.480223] [<ffffffff8116425a>] do_sys_open+0x6a/0x150 [ 1080.480225] [<ffffffff81164360>] sys_open+0x20/0x30 [ 1080.480228] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b Attempts to kill the hung process are unsuccessful: root@deskpc:~# ps -ef |grep amarok myuser 2505 1 0 10:47 ? 00:00:00 /usr/bin/amarok root 2747 2020 0 11:06 pts/3 00:00:00 grep --color=auto amarok root@deskpc:~# kill -9 2505 root@deskpc:~# ps -ef |grep amarok myuser 2505 1 0 10:47 ? 00:00:00 /usr/bin/amarok root 2749 2020 0 11:06 pts/3 00:00:00 grep --color=auto amarok root@deskpc:~# kill -9 2505 root@deskpc:~# ps -ef |grep amarok myuser 2505 1 0 10:47 ? 00:00:00 /usr/bin/amarok root 2751 2020 0 11:06 pts/3 00:00:00 grep --color=auto amarok root@deskpc:~# When trying to access my external USB3 disk, the following kernel message is observed: [ 2169.330012] xhci_hcd 0000:06:00.0: Timeout while waiting for a slot [ 2169.330018] hub 3-0:1.0: couldn't allocate port 1 usb_device I am not sure the two problems (application hangs and USB3 timeouts are related) but they do not happen under Kubuntu 10.10. Judging by the dmesg messages, it looks to me that this is a kernel (or potentially kernel driver) problem, but not sure how to debug it. Any ideas? I ran apport-bug, but it advised me to post a question here first. Shall I report the issue on the official K/Ubuntu bugzilla?

  Read the article

• Vmware installation over ubuntu sever 12.04 lts

  - by Sandeep

  How to install vmware workstation 7.1.6-744570.i386 on Ubuntu Server 12.04 lts. i installed it but error is coming . Vmware kernel module updater Unable to build kernel module. See log file /tmp/vmware-root/setup-8887.log for details. make[2]: * [/tmp/vmware-root/modules/vmmon-only/linux/driver.o] Error 1 make[1]: * [module/tmp/vmware-root/modules/vmmon-only] Error 2 make[1]: Leaving directory /usr/src/linux-headers-3.2.0-27-generic-pae' make: *** [vmmon.ko] Error 2 make: Leaving directory/tmp/vmware-root/modules/vmmon-only' please provide the solution for this

  Read the article

• Killing a Plesk 11.5 backup process in Ubuntu

  - by Klaaz

  I want to kill a backup process initiated by Plesk in Ubuntu but don't know which processes safely can be killed: ps aux | grep backup root 20505 0.0 0.0 4392 604 ? Ss 01:43 0:00 /bin/sh -c [ -x /opt/psa/admin/sbin/backupmng ] && /opt/psa/admin/sbin/backupmng >/dev/null 2>&1 psaadm 20510 0.0 0.0 30884 1816 ? S 01:43 0:00 /opt/psa/admin/sbin/backupmng psaadm 20511 0.0 0.0 30884 644 ? S 01:43 0:01 /opt/psa/admin/sbin/backupmng psaadm 20512 0.0 0.6 270472 49356 ? S 01:43 0:03 /usr/bin/sw-engine -c /opt/psa/admin/conf/php.ini /opt/psa/admin/plib/backup/scheduled_backup.php --dump 1 root 20517 0.0 14.9 1400124 1214696 ? SN 01:43 0:27 /usr/bin/perl /opt/psa/admin/bin/plesk_agent_manager server --owner-uid=0bd9576c-f832-4362-b4f4-3c1afac22be2 --owner-type=server --dump-rotation=7 --backup-profile-name=serverXL_ --session-path=/opt/psa/PMM/sessions/2013-10-23-014303.864 --output-file=ftp://[email protected]//backup/serverXL/ --ftp-passive-mode root 27423 0.0 0.0 13652 888 pts/2 S+ 10:35 0:00 grep --color=auto backup root 29103 1.0 14.8 1400124 1209760 ? SN 02:16 5:21 /usr/bin/perl /opt/psa/admin/bin/plesk_agent_manager server --owner-uid=0bd9576c-f832-4362-b4f4-3c1afac22be2 --owner-type=server --dump-rotation=7 --backup-profile-name=serverXL_ --session-path=/opt/psa/PMM/sessions/2013-10-23-014303.864 --output-file=ftp://[email protected]//backup/serverXL/ --ftp-passive-mode root 29106 0.0 14.8 1400404 1212456 ? DN 02:16 0:07 /usr/bin/perl /opt/psa/admin/bin/plesk_agent_manager server --owner-uid=0bd9576c-f832-4362-b4f4-3c1afac22be2 --owner-type=server --dump-rotation=7 --backup-profile-name=serverXL_ --session-path=/opt/psa/PMM/sessions/2013-10-23-014303.864 --output-file=ftp://[email protected]//backup/serverXL/ --ftp-passive-mode It seems the FTP process is the culprit?

  Read the article

• changing user in ubuntu

  - by Rahul Mehta

  Hi , this is my ls -all, the zfapi folder have the root right , how can i change this to www-data. Also Please advise what is the first root and secont root is ? Thanks drwxr-xr-x 4 www-data www-data 4096 2011-01-06 18:21 cdnapi -rw-r--r-- 1 www-data www-data 678 2010-08-30 12:02 config.js drwxr-xr-x 4 www-data www-data 4096 2010-11-23 15:55 css drwxr-xr-x 7 www-data www-data 4096 2010-11-17 13:12 images -rw-r--r-- 1 www-data www-data 25064 2010-12-17 18:26 index.html -rw-r--r-- 1 www-data www-data 19830 2010-12-18 11:24 init.js drwxr-xr-x 2 www-data www-data 4096 2010-12-02 12:34 lib -rw-r--r-- 1 www-data www-data 18758 2010-12-06 18:00 styles.css -rw-r--r-- 1 www-data www-data 1081 2010-10-21 17:56 testbganim.html drwxr-xr-x 2 www-data www-data 4096 2010-12-17 11:15 yapi drwxr-xr-x 7 root root 4096 2011-01-07 18:20 zfapi

  Read the article

• Allow shutdown/restart if logged in another terminal

  - by user20415

  I have Natty installed. Howto allow shutdown/restart if other user logged in another terminal, for example using CTRL-ALT-DEL? I've tried to add the following lines in /etc/sudoers: user ALL=(root)NOPASSWD:/sbin/reboot user ALL=(root)NOPASSWD:/sbin/halt user ALL=(root)NOPASSWD:/sbin/shutdown and sudo chmod 750 /sbin/shutdown sudo chmod 750 /sbin/reboot or create /etc/shutdown.allow but it doesn't help and I still get Gnome login mask.

  Read the article

• How to use PAM to restrict HTTP access for some users?

  - by MaxB

  I've read that PAM can be used to restrict HTTP access for some users, but I can't figure out how to do it in Ubuntu 12.04. The /etc/security/time.conf man page contains this example: All users except for root are denied access to console-login at all times: login ; tty* & !ttyp* ; !root ; !Al0000-2400 For this to work, /etc/pam.d/login needs to have a line account requisite pam_time.so This example works, and I tried to adapt it to limit HTTP access from the console. I added http ; tty* & !ttyp* ; !root ; !Al0000-2400 to /etc/security/time.conf, and created /etc/pam.d/http with account requisite pam_time.so This doesn't work. I can still use wget as non-root from the console.

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >