Search Results

Search found 5789 results on 232 pages for 'tuner card'.

Page 79/232 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• Attempting to install Ubuntu 11.10 along side Windows 7 Professional 64bit. Installer doesn't recognize an operating system present

  - by KichigaiDave

  System Details: Asus Sabertooth 990FX motherboard AMD FX-8120 CPU 16 GB DDR3 1600 Corsair Vengance RAM (4x4) EVGA Nvidia GTX-560Ti video card 2x Dvd/cd rw dirves 1 Bluray RW drive 1 Orico USB 3.0 & eSata panel 1 Sabrent floppy bay card reader w/USB 2.0 port 760W pc power & cooling PS OCZ agility 120GB SSD (Windows 7 Professional 64bit installed in an approx 80gb partition, NTFS. There is also a "System Reserved" partition shown in disk management at 100mb in size, also NTFS) That leaves about 32GB usable free, un-partitioned space in which I hoped to install Ubuntu. However when I run the Ubuntu 11.10 AMD64 installer, it doesn't show there is even an operating system installed. It just shows the entire drive as free-unpartitioned space. Just not sure what to do here. I was thinking about using the Wubi installer, but i don't know about that. Is the performance reduction pretty drastic? Thanks,

  Read the article

• Installed Ubuntu 14.04. How do I get it working with my new AMD R9 280X. When I run it I get garbage on the display

  - by user289455

  I installed Ubuntu 14.04 on my Gigabyte A88X FM2+ motherboard and A10 7700K processor. Everything worked perfectly. This system is dual booted with Windows 8.1 for gaming and I installed subsequently I installed an AMD r9 280X gpu. Windows was easy. It kept working with the new card installed and I just needed to download and instal the driver. Reboot and it's done. Ubuntu boots into a blank display. I enter the password and can log in. The menu on the left and bar at the top are visible but when I try to open an app, I get blocks and rubbish on the display. My preference is not to remove the card. So, my question is: What would be the procedure I could follow where I can log in using a text based terminal and download and install the AMD drivers.

  Read the article

• Why do the Nouveau drivers work better than the Nvidia ones?

  - by user50774

  I have a bit of a weirdie here. My rig uses an Nvidia GeForce 8600 GTS in a PCIE x16 slot. Up to about a year ago, no problems with the card. I then started getting random crashes. They got more frequent. Now, first thought: It's an old card. But I don't have the bucks to buy a new one, and my mobo doesn't have the DVI input that my monitor needs. So, I decided to take a shot with the Nouveau drives. Amazingly, they have worked flawlessly. Does anyone have a guess as to why?

  Read the article

• Setting Default Ubuntu eth port

  - by No1_Melman

  Background: I have a desktop computer running Ubuntu 12.04. I have installed DRBL to handle DHCP server and Clonezilla Server. I have a network card in my desktop with 2 ports in it. These 2 ports are bonded together and are used by DRBL. There is a 3rd port integrated in the motherboard. I want to use this 3rd port for internet. DRBL knows that this is set for internet. Ubuntu Network-Manager has stopped recognising the connections (device not managed). It use to say that eth1 was default (first port in the network card) I want eth0 to be default as that is the Internet port. Question: How do I make network-manager see eth0 as the defualt port?

  Read the article

• dual display breaks unity

  - by dougleduck

  I find that most of the time, when I plug in my Dell 19" monitor with an HDMI lead, unity can't decide on the configuration; it will switch between different resolutions, and setups every 2-30 setusecond until I either ctrl-alt-backspace or unity crashes so I have to hard boot. Alternatively all the windows decorations and unity get killed. My setup is 11.10 64 bit,Dell Vostro 3550, AMD Radeon HD 6630M 1GB, Intel Core i5-2520M processor 2.50 GHz with integrated graphics card Currently I don't think the Radeon graphics card is working properly, but I'm not sure.

  Read the article

• Can I get some advice on graphics cards please?

  - by Victor9098

  I know that Steam for linux is on the way and have been seen a lot of games appearing in the Ubuntu Software Centre of late but my system lacks a decent graphics card and was hoping I could get some recommendations. The desktop is a Packard Bell Imedia S1800 (or Imedia D3526 UK) with the following specs; Memory: 3.8 GiB Processor: Pentium(R) Dual-Core CPU E5800 @ 3.20GHz × 2 The system lists the graphics as 'unknown', though I think its just an integrated Intel card From what I can see there is a free PCI-E x16 slot. Any advice would be great, thanks!

  Read the article

• Why does Windows 7 overall performance is better than Ubuntu 11.10?

  - by user37805

  I have a i7 2600 processor, 8Gb DDR3 ram, nVidia GTX570, and Ubuntu takes 45-50 seconds to boot and 32-35 seconds to power off, while windows 7 boots in 20-25 seconds and shuts down in 10 seconds. Both OS with autologin enabled, and in dual boot. Ubuntu is slow with preload too, and doesn't show any boot splash after installing drivers and didn't recognize my nVidia graphics card on jockey GTK, I had to add x swat repository and that didn't worked. I installed proprietary drivers through terminal (nvidia-common, nvidia-settings) in order to have 3d acceleration. But it doesn't make any difference on the speed. I also have a Pentium 4 PC and ubuntu 11.10 is way faster than windows 7 or XP. Also with nvidia graphics card and preload. http://paste.ubuntu.com/924890/ there is my boot script, sorry but some words are in Spanish because my ubuntu is in Spanish. Not using WUBI, Ubuntu has its own partition, 64-bits, and Matlab 2011 has very low performance compared to windows version.

  Read the article

• Ubuntu 10.04 LTS Minimal requirements (special)

  - by BDX

  I have a PC with 512MB of RAM, an Intel Pentium 4 processor(2GHz), SiS 651 video card(32MB) and a SiS C-Media AC'97 sound controller. I know that my video card is not and will not be supported for Linux. But I wonder if my PC is able to install and start Ubuntu, not just 10.04 LTS, because I'm willing to download 12.04 LTS when it's released. Will unity work? I searched on the internet but I couldn't find a good answer. Thanks in advanced.

  Read the article

• Problems booting Ubuntu 10.10 with Nvdia GeForce 6600gt

  - by SlyrNemesis

  I am quite new to Ubuntu and I already stumbled upon a problem. I run Ubuntu 10.10 Maverick Meerkat now and Install went fine, when trying to boot the screen popped black and I faced this message "gpu lockup - switching to software fbcon." When setting the display to onboard VGA through BIOS Ubuntu has no problem at all, but when I switch back to my AGP card (which is a Nvidia GeForce 6600GT) I get that message again. I do not use VGA for that card I use my DVI cable for it. Does anyone have an answer for me to make this work? Thank you

  Read the article

• Compiz cube issues since upgrading to 12.10. The caps and 3d windows are all over the place.

  - by Slarty

  I think it's due to residual settings from the old reflection and deformation plug in. I've attempted a complete reset of the settings and still no go though. The cube caps stay black and glitch out when I spin it etc and I see multiple copies of each window. It's like it's trying to display the "inside the cube" setting and the regular just floating 3d window at the same time. Here's one example (rep isn't high enough yet for fancy img imbed, sorry) http://i.stack.imgur.com/rrbBd.jpg Any ideas? I'm trying this on my desktop which is using an NVIDIA 8800 GTS card. I also tried it on an older laptop that uses an intel card and same deal. I think maybe I can use the dconftool and try to see if there are still settings from the deformation and reflection plug in causing this. Unless someone knows how to get that back (either a beta or an old version) somehow?

  Read the article

• The system is running in low graphics mode error before ubuntu gets installed

  - by hellodear

  I am using Bootable USB for installing Ubuntu with Windows 8.1. I have put pendrive and then booting my USB. When it shows me to try Ubuntu or install Ubuntu. Then I press Try ubuntu and then it says" "The system is running in low graphics mode". Then I press Ok. Then it shows 4 options. Then again I click Ok. Then it shows a black screen and nothing happens. I have tried all possible answers provided in AU. What should I do? Please help. I am using Windows 8.1 with dedicated graphic card (Video card - AMD Radeon HD 8670M). Installing 12.04 LTS with pre-installe Windows 8.1 in a Dell Laptop 3537 inspiron.

  Read the article

• screen driver problem

  - by exilada

  I have Intel HD 3000 graphics card onboard and nvidia 520 mx optimus techolonogy card. I was try to install Nvidia driver but it was failure. Now I cant use anything. Have one resolution 640x480 every media disconnected and I cant connect $ xrandr Screen 0: minimum 320 x 200, current 640 x 480, maximum 8192 x 8192 LVDS1 connected 640x480+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 640x480 59.9* VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09 ) glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: Tungsten Graphics, Inc Blockquote something wrong here I guess I try to some solutions but didnt work even it cant nvidia-xconfig file after these By the way system get eror sometimes about xorg Sorry for my English thaks for help.

  Read the article

• Drivers for GeForce 7300 GS?

  - by user1443346

  I have been searching EVERYWHERE!!!!! And I cannot seem to find a driver for my GeForce 7300 GS video card. If I don't get it, the Android SDK emulator won't work. I get this error while starting the emulator up: X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 I looked up anything and everything, and the results I got was to get a video card driver, which I can not find. Any help is appreciated. Thanks!

  Read the article

• AZGroups.org Postcard Idea

  VistaPrint.com is a place that prints very cheap (free sometimes) business cards and post cards. I’ve used them in the past for my user group business cards. The printing is free, but you have to pay fro shipping, and they usually have a VistaPrint Logo on them. For community stuff, it’s great. I received an email this morning about a free post card offer, and I thought I would put together a post card that promotes the AZGroups.org calendar. This calendar is meant to be a simple calendar...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• What can I do to make my eService website customers feel it is a luxurious service? [closed]

  - by Farshid

  I'm developing an e-service website that its monetization model is via paid membership. Beside quality service and content, because I'm serving them for a high fee, I want to make them feel like it is a personal, unparalleled kind of service and I want to spend money for creating things that I give them after their registration such as a beautiful physical membership card so that I can use the effect of mouth-words better and beside that let them be proud about the service. I've tried my best to develop the site experience classy and I'm looking for things in real world to send them after their registration (such as membership card and a small paper tutorial). What are your suggestions? Have you seen things like this before that a website sends you some physical things for making you more loyal and/or something like that? Please kindly share your experiences/suggestions.

  Read the article

• Boot screen appears to be asking a question but garbled

  - by mark kaylor

  I'm running 12.04 Precise Pangolin, Kernel 3.2.0-32 w/ GNOME 3.4.2 I perused the prior questions/answers and did not find exactly the same problem, I am concerned that AUTOFSCK, Grub or some other critical event that needs some attention ? Any idea on how to get my video clean during boot? Once I get past the boot screen the video driver/card, etc is performing beautifully ! Here is a photo of the boot screen; nVidia GeForce CARD INFORMATION (lspci -vvv) 01:00.0 VGA compatible controller: NVIDIA Corporation G72 [GeForce 7300 LE] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gateway 2000 Device 3a07 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: Kernel driver in use: nvidia Kernel modules: nvidia_173, nouveau, nvidiafb Thanks for your help/advice.

  Read the article

• Can not login to Normal mode

  - by Technology is good

  I installed ubuntu 12 in my old PC Acer Power Series. After installation i got the Login Screen which appears unusally big. when i logged-in in some fail-safe mode. I got the normal ubuntu running. but if i restart the system i can login using fail-safe mode but i can't login normally. I think the problem must be i don't have a graphic card. Even if i do have one that must be very very low configuration one. Kindly help me with graphic card config if that is the problem with my PC. I just want to use ubuntu for normal documentation purpose. I am new to ubuntu so techcies help me with basic guidance. Thank you. Karthik Muralitharan

  Read the article

• What driver for nVIDIA GeForce MX440?

  - by ubufan

  I have recently installed (clean install) Ubuntu 12.10 on a desktop PC with nVIDIA GeForce MX440 (AGP 8x) and I have problems with Unity. Although I can see the desktop, however i can't see unity bar and icons. So, I decided to install lubuntu-desktop to see the performance. And yes! I choose lubuntu-desktop from Log On screen and the performance is definetely much better and has nothing to do with the aforementioned on unity. The system has native drivers from the Ubuntu installation. I didn't touch anything in xorg configuration. I also remember that I have managed to have the best performance with this graphic card on my previous Ubuntu 9.10 system, by editing some values in /etc/X11/xorg.conf file. But I can't remember that options, because I formatted the / partition! My question is: Which is the most suitable driver for this card, in order to load the unity feature and have better performance on it?

  Read the article

• Any help please, Not reconizing my hard drive

  - by Imperial0007

  If any1 can help would be much appreciated.. I recently build my own PC would like to use for gaming etc.. (With Ubuntu of course as my OS) Installed Ubuntu via Flash Drive Everything is connected. Purchased a Graphic card/GPU GPU info;(XFX Double D R9 270 925MHz Boost 2GB DDR5 DP HDMI 2XDVI Graphic card) Now my problem is when i put the CD to install the GPU Drivers it would not recognize the HDD So why is the hard drive not being recognized HDD info;(ADATA USA Premier pro SP600 32GB SATA) I am able to enter the BIOS menu (If that helps) Any help would be much appreciated & Thanks in advanced

  Read the article

• My site will not process Credit Cards [closed]

  - by user654389

  Authorized.net was processing my credit card purchases until the end of Feb. As of 3/1/2011 they no longer will process electronic cigarette transactions. Processing network told us we would have a seamless transition over to a processor called EPN. Now we can not process and credit card orders at all. I have been told it's an SSL concern (EPN says no) I have been told it's an issue between Authorized.net and EPN again I am told no. Might site worked and functioned fine until the "seamless" transition took place. Please help me out here. Thanks Dave

  Read the article

• Which version of Ubuntu is recommended for Samsung N270 notebook?

  - by Patu

  I have just installed 12.04 LTS 32bit because it was recommended but it seems slow, slightly slower than the EX family edition windows which came with the notebook and I used for 3 years.... so it makes me wonder if this is the correct version of Ubuntu for me. (or.. maybe I need to install the driver for my built in graphic card? or anything else.) specs: Samsung N270 notebook. Intel Atom cpu N270 @ 1.6GH X 2. 1GB RAM I am not sure the type of graphic card I just know that it is built in of Intel. Thank you guys for the help. Patu.

  Read the article

• mythbuntu 12 - lirc device doesn't appear to even exist

  - by FrustratedWithFormsDesigner

  I'm trying to get a new installation of Mythbuntu working. So far, everything is OK except the remote. The sensor for the remote is on my Hauppauge WinTV HVR 1250. First I tried to run irw to see what was being picked up by the sensor: $ irw connect: No such file or directory Then trying to run lircd gives: $ lircd start$ lircd start lircd: can't open or create /var/run/lirc/lircd.pid I look for any lirc devices and find there are none: $ ls /dev/li* ls: cannot access /dev/li*: No such file or directory Just to be sure, I check in /proc/bus/input/devices, which shows me two powerbuttons (not sure why), kbd and mouse dev, and the audio devs. Nothing for the IR receiver on the tuner card (which I thought was strange because shouldn't the tuner show up here?). $ cat /proc/bus/input/devices I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=PNP0C0C/button/input0 S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 U: Uniq= H: Handlers=kbd event0 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=LNXPWRBN/button/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 U: Uniq= H: Handlers=kbd event1 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0003 Vendor=099a Product=7202 Version=0111 N: Name="Wireless Keyboard/Mouse" P: Phys=usb-0000:00:10.1-2/input0 S: Sysfs=/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/input/input2 U: Uniq= H: Handlers=sysrq kbd event2 B: PROP=0 B: EV=120013 B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe B: MSC=10 B: LED=7 I: Bus=0003 Vendor=099a Product=7202 Version=0111 N: Name="Wireless Keyboard/Mouse" P: Phys=usb-0000:00:10.1-2/input1 S: Sysfs=/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.1/input/input3 U: Uniq= H: Handlers=kbd mouse0 event3 B: PROP=0 B: EV=1f B: KEY=4837fff072ff32d bf54444600000000 70001 20c100b17c000 267bfad9415fed 9e168000004400 10000002 B: REL=143 B: ABS=100000000 B: MSC=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Line" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input4 U: Uniq= H: Handlers=event4 B: PROP=0 B: EV=21 B: SW=2000 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Front Mic" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input5 U: Uniq= H: Handlers=event5 B: PROP=0 B: EV=21 B: SW=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Rear Mic" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input6 U: Uniq= H: Handlers=event6 B: PROP=0 B: EV=21 B: SW=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Front Headphone" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input7 U: Uniq= H: Handlers=event7 B: PROP=0 B: EV=21 B: SW=4 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Line-Out" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input8 U: Uniq= H: Handlers=event8 B: PROP=0 B: EV=21 B: SW=40 According to dmesg, the driver was registered, but it doesn't look like any devices was associated with the driver: $ dmesg | grep irc [ 10.631162] lirc_dev: IR Remote Control driver registered, major 249 So far, I've seen a number of forum pages suggesting that I use some trick to create a link between /dev/lirc and some other device that is the REAL IR sensor, like /dev/event5, but those cases assume that the real device is shown from /proc/bus/input/devices, and I don't see any such device there. Any suggestions on how to fix or further diagnose this?

  Read the article

• Video and LAN Cards are not recognized on Intel DG41RQ MB

  - by artyom

  Hello, My 32 bit Debian Etch with Etch-n-Half kernel 2.6.24 and Etch-n-half video driver xserver-xorg-video-intel 2.2.1-1~etchnhalf2 does not recognize my on-board LAN and Video. I can work only with VESA display. And additional PCI LAN card (that I wanted to use for Cross-X-Cabel). output of lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 04:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10 According to MB Spec: Video: Intel G41 Express Chipset Graphics and Memory Controller Hub Graphics (GMCH) LAN: Realtek 8111D Gigabit Ethernet Controller LAN Support When I run dpkg-reconfigure xserver-xorg is suggest i810 driver but X does not start, it does not start with intel driver as well; only vesa. LAN I even can't find in lspci... the last Realtek card is external one 100MB card. Where to start from?

  Read the article

• Overheating computer

  - by Samurai Waffle

  My computer overheats somewhat frequently, usually during intense use. And by intense use I mean browsing the internet while downloading, or gaming. It even overheats on extremely old games though, Master of Orion 2, which was developed for Windows 95. My computer has a Pentium 4 Ghz processor, 2 GB of ram, and is running Windows XP. One of the symptoms it has after overheating, is that it'll turn on immediately afterwards, but won't show any video on my monitor. I usually have to wait at least 5 minutes (mostly at least 10) before I can get it to turn on and show video on my monitor. I also usually have to wiggle around the graphics card a little bit, which is the ASUS A9550 Series with 256 MB. I'm not sure exactly what is causing the computer to overheat. At first I thought it was the video card, but after I noticed it was doing it while playing Master of Orion 2, I'm not so sure, because that game can't be making the video card work all that hard. So how exactly can I pinpoint the problem? Thanks for any help provided. Edit: Okay I downloaded the programs that you specified, and will start benchmarking my system to try and pinpoint what's overheating. What is the temperature range for when it's getting to hot? Also I have an abundant amount of software experience with computers, but unfortunately not to much hardware experience.

  Read the article

• ATI gpu (video accel, decode, encode, ATI Stream, DXVA)

  - by Shiki

  Okay its a long question title for sure. I'm looking for a new video card (yes,SU is not a page for that, but wait). I've been a loyal NVidia customer ever since, now using a 8600gts. Old but still somewhat good, its a bit slow though. I want an upgrade because 8600gts wont support better vdpau and new features. I checked out the prices and the documents, I would need a GTX260 card. Which costs ..well.. a lot. ATI performs much better for that price. (At least on every test it outperforms GTX260). However, as far as I know there is no gpu accel with ATI. The things you can use is DXVA only, no other method. Could you correct me out there? Will be there a gpu accel for ATI also? Or is there one available? (DXVA is not bad, but kinda slow compared to NVIdia's CUDA.) What about openCL? How does ATI support that? (I'm talking about the 5850 ATI card at the minute, I would buy that instead of the NVidia.)

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >