Search Results

Search found 5670 results on 227 pages for 'zend router'.

Page 79/227 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• how to use iptables to block the IP of device connected to openwrt router

  - by scola

  I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

  Read the article

• Zend_ProgressBar: is there a god example / tutorial on how to use it?

  - by Marcin

  I'm trying to use Zend_ProgressBar in my project (made using MVC in Zend Framework). Unfortunately, I cannot find any full example on how to use it. Zend Programmer's Reference Guide has only some code snippets, which are not enough for me. Basically, I don't know how incorporate Zend_ProgressBar with some action in a controller and associated views. Does anyone know of the simples example or tutorial of zend application that uses Zend_ProgressBar? Many thanks

  Read the article

• Doctrine::Windows::How generate Doctrine Models on windows?

  - by Yosef

  Hi, How generate Doctrine Models from database on windows? (I working with zend studio and zend framework)

  Read the article

• Granting read-write rights to my web application on VPS

  - by davykiash

  Am currently testing a bulk CSV import functionality web application and I came across a error The given destination is not writeable My application is zend based and uses the MVC structure application --uploads library --Zend public --index.php What Ubuntu command do I exectute to safely grant the necessary rights to my uploads folder in my web application?

  Read the article

• The backbone router isn't working properly

  - by user2473588

  I'm building a simple backbone app that have 4 routes: home, about, privacy and terms. But after setting the routes I have 3 problems: The "terms" view isn't rendering; When I refresh the #about or the #privacy page, the home view renders after the #about/#privacy view When I hit the back button the home view never renders. For example, if I'm in the #about page, and I hit the back button to the homepage, the about view stays in the page I don't know what I'm doing wrong about the 1st problem. I think that the 2nd and 3rd problem are related with something missing in the home router, but I don't know what is. Here is my code: HTML <section class="feed"> <script id="homeTemplate" type="text/template"> <div class="home"> </div> </script> <script id="termsTemplate" type="text/template"> <div class="terms"> Bla bla bla bla </div> </script> <script id="privacyTemplate" type="text/template"> <div class="privacy"> Bla bla bla bla </div> </script> <script id="aboutTemplate" type="text/template"> <div class="about"> Bla bla bla bla </div> </script> </section> The views app.HomeListView = Backbone.View.extend({ el: '.feed', initialize: function ( initialbooks ) { this.collection = new app.BookList (initialbooks); this.render(); }, render: function() { this.collection.each(function( item ){ this.renderHome( item ); }, this); }, renderHome: function ( item ) { var bookview = new app.BookView ({ model: item }) this.$el.append( bookview.render().el ); } }); app.BookView = Backbone.View.extend ({ tagName: 'div', className: 'home', template: _.template( $( '#homeTemplate' ).html()), render: function() { this.$el.html(this.template(this.model.toJSON())); return this; } }); app.AboutView = Backbone.View.extend({ tagName: 'div', className: 'about', initialize:function () { this.render(); }, template: _.template( $( '#aboutTemplate' ).html()), render: function () { this.$el.html(this.template()); return this; } }); app.PrivacyView = Backbone.View.extend ({ tagName: 'div', className: 'privacy', initialize: function() { this.render(); }, template: _.template( $('#privacyTemplate').html() ), render: function () { this.$el.html(this.template()); return this; } }); app.TermsView = Backbone.View.extend ({ tagName: 'div', className: 'terms', initialize: function () { this.render(); }, template: _.template ( $( '#termsTemplate' ).html() ), render: function () { this.$el.html(this.template()), return this; } }); And the router: var AppRouter = Backbone.Router.extend({ routes: { '' : 'home', 'about' : 'about', 'privacy' : 'privacy', 'terms' : 'terms' }, home: function () { if (!this.homeListView) { this.homeListView = new app.HomeListView(); }; }, about: function () { if (!this.aboutView) { this.aboutView = new app.AboutView(); }; $('.feed').html(this.aboutView.el); }, privacy: function () { if (!this.privacyView) { this.privacyView = new app.PrivacyView(); }; $('.feed').html(this.privacyView.el); }, terms: function () { if (!this.termsView) { this.termsView = new app.TermsView(); }; $('.feed').html(this.termsView.el); } }) app.Router = new AppRouter(); Backbone.history.start(); I'm missing something but I don't know what. Thanks

  Read the article

• Can't use my form

  - by Alexandr

  I have class with my form in folder /application/forms/Auth.php it looks like class Form_Auth extends Zend_Form { public function __construct() { $this->setName(); parent::__construct(); $username = new Zend_Form_Element_Text('username'); $password = new Zend_Form_Element_Password('password'); $mail = new Zend_Form_Element_Text('mail'); $submit = new Zend_Form_Element_Submit('submit'); $this->addElements(array($username,$password,$mail,$submit)); } } When i try create object $this->view->form = new Form_Auth(); is see exeption Application error Exception information: Message: Invalid name provided; must contain only valid variable characters and be non-empty Stack trace: D:\WWW\zends\application\Forms\Auth.php(8): Zend_Form-setName() d:\WWW\zends\application\controllers\RegistrationController.php(49): Form_Auth-__construct() D:\WebServer\ZendFramework\ZendFramework\library\Zend\Controller\Action.php(513): RegistrationController-indexAction() D:\WebServer\ZendFramework\ZendFramework\library\Zend\Controller\Dispatcher\Standard.php(289): Zend_Controller_Action-dispatch('indexAction') D:\WebServer\ZendFramework\ZendFramework\library\Zend\Controller\Front.php(954): Zend_Controller_Dispatcher_Standard-dispatch(Object(Zend_Controller_Request_Http), Object(Zend_Controller_Response_Http)) D:\WebServer\ZendFramework\ZendFramework\library\Zend\Application\Bootstrap\Bootstrap.php(97): Zend_Controller_Front-dispatch() D:\WebServer\ZendFramework\ZendFramework\library\Zend\Application.php(366): Zend_Application_Bootstrap_Bootstrap-run() D:\WWW\zends\public\index.php(26): Zend_Application-run() {main} Request Parameters: array ( 'controller' = 'registration', 'action' = 'index', 'module' = 'default', ) the version zf is 1.10.3 what i do wrong ?

  Read the article

• Apache will not start with mod_wsgi enabled

  - by Rox45

  I'm trying to run Apache with mod_wsgi to run Python scripts. The server is running Ubuntu 12.04 with Zend Server installed, but when I enable the wsgi module Apache will not start. I get an error message of "apache2: apr_sockaddr_info_get() failed" in the error log. I installed the module using the Debian package. I can't seem to find this specific problem anywhere so maybe it's a problem with Zend Server? I'm stumped. Thanks

  Read the article

• validate input data with symfony, doctrine or zend_validate?

  - by fayer

  im using symfony with doctrine and zend. i wonder if i wanna validate the user input data, should i use validation from symfony, zend or even doctrine? i think i should go with symfony, but are there times the validation from zend or doctrine would be better? thanks

  Read the article

• Need reccomendation for transferring ASP.NET MVC skills to PHP

  - by Tuck

  I am looking to translate my skills in .NET to PHP - specifically in regards to ASP.NET MVC. At work I am currently using .NET MVC 2.0 on a variety of projects and thoroughly enjoy the platform. Specifically I enjoy the very minimal configuration required to get a project up and running (just create the project, define routes, and start coding), as well as the ability for controller actions to return different items (i.e. ActionResult, JsonResult). Another piece I really like is the way the view/model interaction can be handled. For example I like being able to call return View(model) and having a view page (.aspx) load and having the full model object available to the view, regardless of the model type. I'm looking for a PHP implementation of MVC that is the most similiar to what I am already familiar with. I don't anything apart from the MVC functionality. I've looked at Zend, Symfony, CodeIgniter, etc. and, while they look like they'll be fun to play with in the future, they provide much more functionality than I need. I'd prefer to write my own DAL,form helpers, delegate handlers,authentication/ACL pieces, etc. In short, I just need something to handle the routing and view interactions and will worry about the model implementation myself. Can someone please point me to some lightweight code that accomplishes or comes close to accomplishing my objectives above. Or, can someone identify just the portions of a larger framework that do the same (again, I'm not currently interested in implementing something on a big framework, just the MVC portion and want to implement the model portion myself as much as possible). Thanks in advance...

  Read the article

• Need recommendation for transferring ASP.NET MVC skills to PHP

  - by Tuck

  I am looking to translate my skills in .NET to PHP - specifically in regards to ASP.NET MVC. At work I am currently using .NET MVC 2.0 on a variety of projects and thoroughly enjoy the platform. Specifically I enjoy the very minimal configuration required to get a project up and running (just create the project, define routes, and start coding), as well as the ability for controller actions to return different items (i.e. ActionResult, JsonResult). Another piece I really like is the way the view/model interaction can be handled. For example I like being able to call return View(model) and having a view page (.aspx) load and having the full model object available to the view, regardless of the model type. I'm looking for a PHP implementation of MVC that is the most similiar to what I am already familiar with. I don't anything apart from the MVC functionality. I've looked at Zend, Symfony, CodeIgniter, etc. and, while they look like they'll be fun to play with in the future, they provide much more functionality than I need. I'd prefer to write my own DAL, form helpers, delegate handlers, authentication/ACL pieces, etc. In short, I just need something to handle the routing and view interactions and will worry about the model implementation myself. Can someone please point me to some lightweight code that accomplishes or comes close to accomplishing my objectives above. Or, can someone identify just the portions of a larger framework that do the same (again, I'm not currently interested in implementing something on a big framework, just the MVC portion and want to implement the model portion myself as much as possible). Thanks in advance.

  Read the article

• Database and query to store and retreive friend list [migrated]

  - by amr Kamboj

  I am developing a module in website to save and retreive friend list. I am using Zend Framework and for DB handling I am using Doctrine(ORM). There are two models: 1) users that stores all the users 2) my_friends that stores the friend list (that is refference table with M:M relation of user) the structure of my_friends is following ...id..........user_id............friend_id........approved.... ...10.........20 ..................25...................1.......... ...10.........21 ..................25...................1.......... ...10.........22 ..................30...................1.......... ...10.........25 ..................30...................1.......... The Doctrine query to retreive friend list id follwing $friends = Doctrine_Query::create()->from('my_friends as mf') ->leftJoin('mf.users as friend') ->where("mf.user_id = 25") ->andWhere("mf.approved = 1"); Suppose I am viewing the user no.- 25. With this query I am only getting the user no.- 30. where as user no.- 25 is also approved friend of user no.- 20 and 21. Please guide me, what should be the query to find all friend and is there any need to change the DB structure.

  Read the article

• Dependency Injection and method signatures

  - by sunwukung

  I've been using YADIF (yet another dependency injection framework) in a PHP/Zend app I'm working on to handle dependencies. This has achieved some notable benefits in terms of testing and decoupling classes. However,one thing that strikes me is that despite the sleight of hand performed when using this technique, the method names impart a degree of coupling. Probably not the best example -but these methods are distinct from ... say the PEAR Mailer. The method names themselves are a (subtle) form of coupling //example public function __construct($dic){ $this->dic = $dic; } public function example(){ //this line in itself indicates the YADIF origin of the DIC $Mail= $dic->getComponent('mail'); $Mail->setBodyText($body); $Mail->setFrom($from); $Mail->setSubject($subject); } I could write a series of proxies/wrappers to hide these methods and thus promote decoupling from , but this seems a bit excessive. You have to balance purity with pragmatism... How far would you go to hide the dependencies in your classes?

  Read the article

• Using dd-wrt Dynamic DNS client with CloudFlare

  - by Roman

  I'm trying to configure Dynamic DNS client on my router with dd-wrt (v24-sp2) firmware so it would dynamically change IP address in one of the DNS records. Unfortunately I encountered a problem… Here is an example request from their ddclient configuration: https://www.cloudflare.com/api.html?a=DIUP&u=<my_login>&tkn=<my_token>&ip=<my_ip>&hosts=<my_record> It works if I use it in browser, but in dd-wrt I get this output: Tue Jan 24 00:36:47 2012: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Tue Jan 24 00:36:47 2012: I:INADYN: IP address for alias '<my_record>' needs update to '<my_ip>' Tue Jan 24 00:36:48 2012: W:INADYN: Error validating DYNDNS svr answer. Check usr,pass,hostname! (HTTP/1.1 303 See Other Server: cloudflare-nginx Date: Mon, 23 Jan 2012 14:36:48 GMT Content-Type: text/plain Connection: close Expires: Sun, 25 Jan 1981 05:00:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Location: https://www.cloudflare.com/api.html?a=DIUP&u=<my_login>&tkn=<my_token>&ip=<my_ip>&hosts=<my_record> Vary: Accept-Encoding Set-Cookie: __cfduid=<id>; expires=Mon, 23-Dec-2019 23:50:00 GMT; path=/; domain=.cloudflare.com Set-Cookie: __cfduid=<id>; expires=Mon, 23-Dec-2019 23:50:00 GMT; path=/; domain=.www.cloudflare.com You must include an `a' paramiter, with a value of DIUP|wl|chl|nul|ban|comm_news|devmode|sec_lvl|ipv46|ob|cache_lvl|fpurge_ts|async|pre_purge|minify|stats|direct|zone_check|zone_ips|zone_errors|zone_agg|zone_search|zone_time|zone_grab|app|rec_se URL from "Location" works perfectly and parameter "a" is included. What's the problem?

  Read the article

• What do "Unknown SSAP" and "Unknown DSAP" mean in tcpdump?

  - by lacker

  While trying to fix a problem with intermittently losing internet connection on a machine with a wireless connection to a router, I ran tcpdump and noticed packets with "Unknown SSAP" and "Unknown DSAP" errors coming at a rate of a few per second. 20:27:21.703178 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe2 Information, send seq 0, rcv seq 16, Flags [Response], length 171 20:27:21.724726 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe2 Information, send seq 0, rcv seq 16, Flags [Response], length 104 20:27:21.746449 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe4 Information, send seq 0, rcv seq 16, Flags [Response], length 88 20:27:21.970963 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe8 Information, send seq 0, rcv seq 16, Flags [Response], length 76 20:27:22.016565 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xea Information, send seq 0, rcv seq 16, Flags [Response], length 88 20:27:22.038471 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xea Information, send seq 0, rcv seq 16, Flags [Response], length 171 What does the "Unknown SSAP" and "Unknown DSAP" mean, and does it indicate a problem?

  Read the article

• Apache2, making my site publicly available

  - by Shackler

  Hello, I want to make my apache 2 development server public to the internet, it is a Django based website. Here is my apache2 config: <VirtualHost *:80> Alias /media /home/user/myproject/statics Alias /admin_media /home/myuser/django/Django-1.1.1/django/contrib/admin/media WSGIScriptAlias / /home/myuser/myproject/myproject_wsgi.py WSGIDaemonProcess myproject user=myuser group=myuser threads=25 WSGIProcessGroup myproject </VirtualHost> When I do netstat -lntup I get: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN - tcp6 0 0 :::80 :::* LISTEN - tcp6 0 0 :::22 :::* LISTEN - tcp6 0 0 ::1:631 :::* LISTEN - udp 0 0 0.0.0.0:5353 0.0.0.0:* - udp 0 0 0.0.0.0:38582 0.0.0.0:* I connect with ADSL thus I am behind a router. For this I have made my computer DMZ enabled to my machine. What can be the problem? When I try to login with my ip, I get my routers config page, when a friend tries to connect to me from internet, he gets "not authorized".

  Read the article

• Using two ports on my ZyXel USG gateway to patch two devices together?

  - by Matthew Beza

  I don't know if this is possible but it would save me many long drives! I have drawn, with my epic MS Paint skills, my current setup. I have a ZyXel USG300 Gateway with a built in 5 port switch. It supports bridging, tunnles, VLANs, etc.. I have a Cisco WLC2112 plugged into port 6 (P6). The cisco is set to 192.168.6.2 and P6 is set to 192.168.6.1. This works but I need to incorporate a Nomadix AG3000 to handle guests. (Router (A) in the picture). So I need the Cisco WLC2112 to use the Nomadix as if it where plugged into it's LAN port. Right now the Nomadix WAN Port is plugged into (P2) on the ZyXel, and the Nomadix LAN port is plugged into (P3). Is it possible to set something up where (P3) and (P6) are somehow "Patched" as if the Cisco was plugged directly into the Nomadix LAN port? Basically making the ZyXel a fancy Cat5e coupler?

  Read the article

• What do "Unknown SSAP" and "Unknown DSAP" mean in tcpdump?

  - by lacker

  While trying to fix a problem with intermittently losing internet connection on a machine with a wireless connection to a router, I ran tcpdump and noticed packets with "Unknown SSAP" and "Unknown DSAP" errors coming at a rate of a few per second. 20:27:21.703178 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe2 Information, send seq 0, rcv seq 16, Flags [Response], length 171 20:27:21.724726 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe2 Information, send seq 0, rcv seq 16, Flags [Response], length 104 20:27:21.746449 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe4 Information, send seq 0, rcv seq 16, Flags [Response], length 88 20:27:21.970963 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xe8 Information, send seq 0, rcv seq 16, Flags [Response], length 76 20:27:22.016565 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xea Information, send seq 0, rcv seq 16, Flags [Response], length 88 20:27:22.038471 00:24:a5:af:24:f6 (oui Unknown) Unknown SSAP 0xde > 1c:65:9d:48:38:95 (oui Unknown) Unknown DSAP 0xea Information, send seq 0, rcv seq 16, Flags [Response], length 171 What does the "Unknown SSAP" and "Unknown DSAP" mean, and does it indicate a problem?

  Read the article

• How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

  - by piobyz

  I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

  Read the article

• How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

  - by piobyz

  I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

  Read the article

• How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

  - by piobyz

  I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

  Read the article

• SCM8014 to FVS338

  - by Jack

  I have a SMC8014 Router/Modem that Comcast provided me with their business class service. It was not filtering malicious traffic as aggressively as I had hoped, so I purchased a NetGear ProSafe FVS338, and put this behind the SMC8014, and all my machines behind that. After some brief configuration, all machines can see out to the internet. I also have a single web server, and I have not been able to configure things so that incoming requests can reach it. This is where I need help! I would like to have the FVS339 do NAT, so that I can assign a 192.168 address to my webserver. I've tried everything I know of, and I can't get things going. I set the SMC8014 to have a LAN facing IP of 10.0.0.1, and I assigned the FVS339 a WAN facing IP of 10.0.0.2. I would like to be able to tell the SMC8014 to just forward all traffic to 10.0.0.2, but I haven't had any success. In my (unfortunately limited) understanding, what I probably want here is a static route, but I don't know how to cofigure one, or if this is really what I want. The SMC8014 wants a Destination IP, a Subnet Mask and a Gateway IP. Any help would be appreciated.

  Read the article

• Trying to understand Wireless N vs Wireless AC

  - by EGHDK

  Whenever a new wireless standard gets approved you expect faster speeds and longer range. From everything that I've read about it, it seems that AC will only transfer over the 5GHz band and up to 3Gbps. Studying the new AC routers on the market, it seems that they will transfer over 5GHz and 2.4GHz. And 5GHz will only transfer at 1.3Gbps. Which isn't what AC is supposed to be. I know there is a difference between what the standard actually says, and what products will actually do, but is there any reason for this? Is there any other main differences between AC and N? I've heard people discussing AC and saying that it's finally "fixing" what N was supposed to fix... what do they mean by that? Any security benefits? I have seen this image online: Will AC really do that? Will that require an AC network card in my laptop for that to actually happen? Lastly, will the router only be able to communicate with AC devices if I have beamforming technology on? I know it's a ton of questions, but most articles online seem to be outdated, and don't provide too much reliability.

  Read the article

• Hardware needed to route between two networks over wireless

  - by AptDweller

  I recently rented an apartment about 100 yards from my brother's house. I have line of sight to his house and can pick up his home AP signal with one of my two laptops if I go out on my balcony (facing his house) or put the laptop by the window. The other laptop will sometimes see the SSID broadcast, but fails to connect, drops, etc. We would like to set up a persistent wireless connection between our homes. We would prefer each network be logically segmented as independent networks, but he will share his internet connection. I've got a bunch of tv shows saved to a NAS by my TiVO that I'd like to make available to him across the wireless link. My brother strongly prefers to not mess with his WAP at all. His network is running fine and is afraid to mess it up. I guess you could say he is "technologically declined". If we can get a reliable 11Mbps connection we will be satisfied. What hardware do I need to make this work? I was thinking a router with two wireless interfaces (external antennas) a wired interface, and a directional antenna mounted on my balcony facing his house. Can anyone recommend hardware to make this happen? Cheaper is better. I'll only be living in the area a year or two. I do have an old satellite TV antenna if that can be used to direct the signal.

  Read the article

• Connection problems via Wifi (multiple devices)

  - by Kelvin Farrell

  I'm having connection issues with my router (Linksys WRT610N) at home. There are a number of things that are happening (may be more, this is just what I've mainly noticed)... 1) Using my laptop (Macbook Pro OSX Lion), I am unable to complete any operations with my external FTP server, hosted with FatCow. I can connect to it, navigate through all the files, but when I try to edit/delete/add a file the operation times out. EVERY time. I've used two other Wifi connection on my laptop and neither have this issue. 2) I am unable to upload photos/videos to Facebook or Twitter using my phone (Samsung Galaxy S2) or my tablet (HP Touchpad - CM9). Neither am I able to upload files to Dropbox via either of the devices. Same thing happens in all situations; the upload will begin and it will just hang on 0% forever. After about 10 mins I am always forced to disconnect the Wifi to stop the action. 3) My laptop is having slow internet speed, even though we are on 20mb broadband. Speedtests say I'm getting a good connection and my Ping is good, but when using streaming services like Spotify, it takes forever to load a page and frequently stops to buffer whilst playing a song. Don't know if it's worth mentioning but I have no issues with my XBox (Ethernet), AppleTV (Wifi) or my girlfrield's phone (Nokia Lumia 800 - WP7.5) on the network. I'd really appreciate any help. This is driving me insane and is really affecting both my working and leisure use of the internet.

  Read the article

• Setting up a network where packets are traced

  - by Marcus

  My situation is the following: I have an internet connection, which is shared between people. More or less obviously, people is using it to download illegal stuff. Since I'm the owner of the connection, I want to avoid being sued. I don't want to prevent the people from doing the things they want, but I want to be legally safe. Now, I have relatively little competences in network administration, so I was wondering: is it possible to setup a network, where the source and destination of the packets are logged? I would use this to prove, in case of lawsuit, that the traffic was coming from a given machine. if the idea is feasible, is there any wireless router on which I can install linux, where I can install the packet sniffer? how much space could the logs take (containing only the timestamp/source/destination), per GB of traffic? a very rough estimation would be very helpful. if a machine on my network is sending bittorrent packets to a certain IP, would this log be able to reflect the time, source ip and destination ip? I assume that obviously the torrent data would be encrypted and un-decryptable. Am I missing something? Is there a better strategy? Any pointer to documentation would be helpful as well - in that case, I would use this as starting point.

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >