Search Results

Search found 22633 results on 906 pages for 'service accounts'.

Page 793/906 | < Previous Page | 789 790 791 792 793 794 795 796 797 798 799 800  | Next Page >

  • PTR and A record must match?

    - by somecallmemike
    RFC 1912 Section 2.1 states the following: Make sure your PTR and A records match. For every IP address, there should be a matching PTR record in the in-addr.arpa domain. If a host is multi-homed, (more than one IP address) make sure that all IP addresses have a corresponding PTR record (not just the first one). Failure to have matching PTR and A records can cause loss of Internet services similar to not being registered in the DNS at all. Also, PTR records must point back to a valid A record, not a alias defined by a CNAME. It is highly recommended that you use some software which automates this checking, or generate your DNS data from a database which automatically creates consistent data. This does not make any sense to me, should an ISP keep matching A records for every PTR record? It seems to me that it's only important if the IP address that the PTR record describes is hosting a service that is sensitive to DNS being mismatched (such as email hosting). In that case the forward zone would be configured under a domain name (examples follow the format 'zone - record'): domain.tld -> mail IN A 1.2.3.4 And the PTR record would be configured to match: 3.2.1.in-addr.arpa -> 4 IN PTR mail.domain.tld. Would there be any reason for the ISP to host a forward lookup for an IP address on their network like this?: ispdomain.tld -> broadband-ip-1 IN A 1.2.3.4

    Read the article

  • How can I get Haproxy to not log local requests?

    - by coneybeare
    I am trying to clean out some of the log clutter from my machines and am starting by removing requests that are generated from the server themselves. I have cache warmers running around the clock and I don't want these polluting the logs. I was able to get apache to stop logging local requests by adding a dontlog for the local IP: SetEnvIf Remote_Addr "RE\.DA\.CT\.ED" dontlog CustomLog "|logger -p local3.info -t http" combined env=!dontlog and now I am looking for something similar to put in a configuration for the Haproxy log. How can I prevent 127.0.0.1 requests from writing to the Haproxy log? UPDATE: 2/15/11 I use the excellent loggly service to pull out logs in the cloud, but I am seeing tons of logs like this: 2011 Feb 15 06:09:42.000 ip-10-251-194-96 http: RE.DA.CT.ED - - [15/Feb/2011:06:09:42 -0500] "HEAD /search/Nevad/predictive/txt HTTP/1.0" 200 - "-" "Wget/1.10.2 (Red Hat modified)" 2011 Feb 15 06:09:42.000 127.0.0.1 haproxy[10390]: 127.0.0.1:58408 [15/Feb/2011:06:09:42] www i-5dd7a331.0 0/0/0/8/8 200 210 - - --NI 0/0/0 0/0 "HEAD /search/Nevad/predictive/txt HTTP/1.1" and I want them gone. This question focuses on how to remove that haproxy log line from writing to the server side log in the first place.

    Read the article

  • [tcpdump] Proxy delegate refusing connexion ?

    - by simtris
    Hi guys, I'm a little disapointed ! My aim was to build a VERY simple smtp proxy under debian to handle mail from a port (51234) and forward it to the standard 25 port. I compile and install a "delegate" witch can handle easily that. It's working very well like that : delegated SERVER="smtp://anotherSmtpServer:25" -P51234 The strange thing is, it's working on my virtual test machine and on the dedicated server in local but I can't manage to use it trought internet. I test it like that. telnet [mySrv] 51234 Of course, no firewal, no deny host, no ined/xined, the service delegated is listening on the right port ... 2 clues : The port is answering trought internet with nmap as "51234/tcp open tcpwrapped" have a look at the tcpdump following : 22:50:54.864398 IP [myIp].1699 [mySrv].51234: S 2486749330:2486749330(0) win 65535 22:50:54.864449 IP [mySrv].51234 [myIp].1699: S 2486963525:2486963525(0) ack 2486749331 win 5840 22:50:54.948169 IP [myIp].1699 [mySrv].51234: . ack 1 win 64240 22:50:54.965134 IP [mySrv].43554 [myIp].auth: S 2485396968:2485396968(0) win 5840 22:50:55.243128 IP [myIp] [mySrv]: ICMP [myIp] tcp port auth unreachable, length 68 22:50:55.249646 IP [mySrv].51234 [myIp].1699: F 1:1(0) ack 1 win 46 22:50:55.309853 IP [myIp].1699 [mySrv].51234: . ack 2 win 64240 22:50:55.310126 IP [myIp].1699 [mySrv].51234: F 1:1(0) ack 2 win 64240 22:50:55.310137 IP [mySrv].51234 [myIp].1699: . ack 2 win 46 The part "auth" seems suspect to me but didn't ring a bell. I could certaily do with some help. Thx a lot !

    Read the article

  • server 2008 r2 stuck on installing updates

    - by volody
    I have 2008 r2 64bit server that is stuck on installing updates. It shows message "Please do not power off or unplug your machine. Installing 57 of 61.." This message is shown for 3 hours now. I was trying to connect to this server using mmc. runas /user:AdministratorAccountName@ComputerName "mmc %windir%\system32\compmgmt.msc" RUNAS ERROR: Unable to run - mmc C:\Windows\system32\compmgmt.msc 1311: There are currently no logon servers available to service the logon request. What else can I do? Update: Remote Desktop does not work. It just disappear after entering username and password from Win7-64 computer Update: I have disconected server. Now Server Manager in Roles Summary shows message "Unexpected error refreshing Server Manager: The remote procedure call failed." Event log shows Could not discover the state of the system. An unexpected exception was found: System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.Windows.ServerManager.ComponentInstaller.ThrowHResult(Int32 hr) at Microsoft.Windows.ServerManager.ComponentInstaller.CreateSessionAndPackage(IntPtr& session, IntPtr& package) at Microsoft.Windows.ServerManager.ComponentInstaller.InitializeUpdateInfo() at Microsoft.Windows.ServerManager.ComponentInstaller.Initialize() at Microsoft.Windows.ServerManager.Common.Provider.RefreshDiscovery() at Microsoft.Windows.ServerManager.LocalResult.PerformDiscovery() at Microsoft.Windows.ServerManager.ServerManagerModel.CreateLocalResult(RefreshType refreshType) at Microsoft.Windows.ServerManager.ServerManagerModel.InternalRefreshModelResult(Object state) Update: Manual update hangs on (Installing update 58 of 62...) Seurity Update for Windows Server 2008 R2 x64 Edition (KB979309) Update: It could be an issue with that admin user was renamed

    Read the article

  • IIS crashes with unhandled exception in ASP.NET

    - by SnowCrash
    We had an issue recently with an unhandled exception in an ASP.NET C# application bringing down IIS and all application pools that it was hosting. IIS Manager was unable to restart or stop/start the service and I was unable start IIS again after killing w3wp.exe in the task manager. A system reboot restored IIS to a running state; as a primarily Linux admin, I generally consider an unplanned system reboot to resolve a software error to be an act of high heresy. Is there a way to "harden" IIS so that a faulting application does not affect anything but the request that exposes the fault? Some details on the server and application fault. IIS: 7.5 .NET: 4.0 Windows Server 2008 R2 Faulted on call to System.Net.Dns.Resolve() with a url pointing to a non-existant domain as the argument. (I'm aware that this method is deprecated but the point that a page code issue shouldn't bring down the server still stands) The exception generated was SocketException. The faulting module according to event viewer was KERNELBASE.dll The issue was resolved by wrapping the call in a try-catch, logging the exception and displaying some generic content on the page. I'm hoping that I missed something in the IIS config that would switch it to "production" mode or something.

    Read the article

  • Windows 7 ssh file server.

    - by Siriss
    Hello all- I have looked at the other posts, but have not quite found an answer I have a question about windows file sharing over SSH. I have copssh installed and it is working for Remote desktop connections. I have port 22 forwarded on my router etc. I connect from a Mac or Putty with this address: ssh -l copsshusername 3391:localhost:3389 [external ip] That works fine. I would like to configure Windows 7 to allow my ssh account that I use to login, access to certain shared folders. I have documents and videos and things that I would like to be able to download externally. I have done this before on Linux and a long time ago on XP, but I cannot figure out what I am missing on Windows 7. There is a designated SSH user that copssh uses to run the service and that I use to to login as. I have googled and googled and have not found a solution that does everything I need that is why I am turning here for ideas. I hope I am explaining this correctly. Thank you very much for your help!

    Read the article

  • Windows 7 BSOD when I walk away from the computer

    - by bobobobo
    I have a really weird experience with this new AM3 box I set up. Everything seems fine at first. But now I get frequent (daily) BSOD's, mostly when I walk away from the computer for more than 5 minutes (when the computer is idle). The BSOD's as shown by BlueScreenView almost always have to do with ntoskrnl.exe, and they'll do with really normal sounding operations, like SYSTEM_SERVICE_EXCEPTION, NTFS_FILE_SYSTEM, DRIVER_IRQL_NOT_LESS_OR_EQUAL, KMODE_EXCEPTION_NOT_HANDLED, BAD_POOL_HEADER - You name it. These are basically them, and they repeat after that, just random order. Its not like one is more consistently the problem than the other. I have Windows update ON and I let it do its updates everytime it wants to. I turned windows indexing service off, but it seems Windows 7 does a lot of background processing when I'm away - I'll come into the room and the fan will be going nuts (I'm pretty sure this isn't because the computer flies into a panic whenever I leave). I tried finding updates for my ASUS, and really there isn't much to install (except some new driver firmware). I'm going to install that to see if it helps, but what else could it be? Is it possible its a hardware issue with the board? Or is every Windows 7 user experiencing daily BSOD these days that I don't know about?

    Read the article

  • How to create a init.d script for openssh-server which was compiled and installed from source using configure + make + make install?

    - by Patrick L
    I have installed openssh-server in my Ubuntu PC using apt-get install openssh-server. The version is 5.9. Now, I would like to compile and install openssh-server version 6.2 from source codes. I have successfully downloaded the source codes, and run the following commands: ./configure make make install I found that the new version of openssh-server was installed into /usr/local/sbin/. The old version of openssh-server is in /usr/sbin/. I found that the service script in /etc/init.d/ssh is still pointing to /usr/sbin/. And the old openssh-server (v5.9) is still running. How can I replace the old openssh-server with the new openssh-server that I have just compiled and installed? How can I create a init.d script to start and stop the new openssh-server that I've compiled from source manually? How to start the new openssh-server on boot? When I install openssh-server using apt-get install, the config files will be installed into /etc/ssh/. If I compile and install it from source, where is the config file? If I compiled openssh-server from source, but I install openssh-client package using apt-get install, will there be any config files conflict? Thanks.

    Read the article

  • How To Replace Laptop HDD Without Losing Data?

    - by Ishan
    Hello, I recently went to Dell Service center and they tell that HDD is faulty and needs to be replaced. I have a Studio 1457 laptop with 500 GB HDD and don't want to lose the data(purchased in May 2010, still under warranty). I have searched a bit and I think it may be best to use a disk imaging software for this task. However, I don't know about a good software. I have following steps in mind: Get a 1 TB External HDD. Make an image of existing 500 GB HDD and store data on external disk. Install new HDD and install a brand new Windows copy and then install the software on it. Using the same software I used to make image, restore the old HDD image on new one. However, I have some questions in mind. First, is this possible? Second, I live in a country where piracy is a big issue and I am sure the support executive who will come to change HDD will have a pirated copy. But I have genuine Windows 7 Pro and don't want to lose it. Now, Dell does not supply and OS disks, so I can't install it on new HDD! If I follow above steps, which version of Windows 7 will be retained? One in the image(authentic) or one in the new HDD(pirated). I am ready to purchase a good software for this task and my budget is $50-60. Since laptop is under warranty, new HDD will be free. One last thing, I have created a Windows Migration file whose size is 70 GB. Can it be used to move from Windows 7 Pro to Windows 7 Pro?(In case I get a genuine copy of Windows 7!) Any other method to save all the data? Thanks in advance.

    Read the article

  • Raid 5 with hot spare or RAID 10 with no hot spare?

    - by Boden
    Yes, this is on of those "do my job for me" questions, have some pity:) I'm at the limit for what I can do with the number of hard drives in a server without spending a substantial amount of money. I have four drives left to configure, and I can either set them up as a RAID 5 and dedicate a hot spare, or a RAID 10 with no hot spare. The size of each will be the same, and the RAID 5 will offer enough performance. I'm RAID 5 shy, but I also don't like the idea of running without a hot spare. I'm not so interested in degraded performance, but the amount of time the system is without adequate redundancy. The server and drives are under a 13x5 4 hour response contract (although I happen to know that the nearest service provider is at least 2-3 hours away by car in the winter). I should note that the server also has two RAID 1 arrays which would also be protected by the hot spare. Why don't they make drive cages with 9 bays! Heh.

    Read the article

  • Transferring an SQL Processor License to a virtual hosted environment

    - by Andrew Shepherd
    My company is currently hosting a service in-house, and we want to move to an externally hosted environment. We would then be using a virtual server. I understand that this might be spread across multiple machines, but from my perspective as a customer, this layer is abstracted away - I shouldn't know or care about the hardware that the OS is hosted on. We have a licensed edition of SQL Server 2008. This is one Processor license. Will it be a violation of the licensing agreement to use this in a virtual environment. From the reference guide here it says When licensed Per Processor With Workgroup, Web, and Standard editions, for each server to which you have assigned the required number of per processor licenses, you may run, at any one time, any number of instances of the server software in physical and virtual operating system environments on the licensed server. However, the total number of physical and virtual processors used by those operating system environments cannot exceed the number of software licenses assigned to that server For enterprise edition there is an added option: if all physical processors in a machine have been licensed, then you may run unlimited instances of SQL server 2008 in one physical and an unlimited number of virtual operating environments on that same machine. I'm having trouble getting my head around this. Would I theoretically have to get a license for every processor in this virtual environment (which is effectively impossible because I have no way of knowing how many processors there actually are)? Or can I just say that it's hosted on one "virtual" server, so that's OK?

    Read the article

  • What to look for in a switch with LAN/WAN verses an iSCSI SAN?

    - by Luke
    I'm setting up a VMWare ESXi 5 environment with 3 server nodes. Dell recommended 2x Force10 S60 switches shared (iSCSI SAN, LAN/WAN). The S60 switches are extremely powerful. They have 1.25 GB of buffer cache, < 9us latency. But they are very expensive (online price ~$15k per switch, actual quote a little less). I've been told that "by the book" you should at least have 2 internal switches for SAN, and 2 switches for LAN/WAN (each with a redundant). I know some of the pros and cons of each approach. What I'm wondering is, would it be more cost effective to disjoin the SAN from LAN with less expensive switches? The answer to this question highlights what I should be looking for in a switch for the SAN. What should I be looking for in a LAN/WAN switch, in comparison to the SAN? With the above linked question for the SAN: How is buffer latency measured? When you see 36 MB of buffer cache, is that shared or per port? So 36 MB would be 768kb or 36MB per port? With 3 to 6 servers how much buffer cache do you really need? What else should I be looking at? Our application will be heavily using HTML5 websockets (high number of persistent connections). The amount of data being sent is small; Data sent between client <- server isn't broadcasted (not a chat/IM service). We will be doing some database reporting too (csv export, sums, some joins). We are a small business and on a budget. We'd probably only be able to spend no more than $20k on switches total (2 or 4).

    Read the article

  • windows 7 turns off itself everyday at about 9am

    - by Radek
    I was given this comp at work and after a week or so this strange thing started to happen in the middle of doing something :-( It turns off itself at about 9.10am every morning Just once a day and it works fine after it had it little nap. it happens both if the comp was on all night or I turned it off before leaving the office. I tried to swapped the memory as I was told that there was an issue with memory. But moving or removing any memory did not make any difference. I am not aware that I would install any program that could cause that. I installed AVG and set it up to do every day scan about 8am + if restart is needed it requires user confirmation. 'The Software Protection service has stopped' few minutes before it turned off itself but it happened also at other times without the computer turned off. I turned off Windows automatic updates as the first thing when I got the comp configuration Windows 7 Ultimate Intel Core2 Quad Q9550 at 2.8GH, 8GB RAM ST31000528AS Barracuda 7200.12 SATA 3Gb/s 1TB Update Below message are logged when I turn the comp on again. Message 1: The previous system shutdown at 9:08:54 AM on ?6/?29/?2010 was unexpected. Message 2: Level:Critical Source: Kernel Power EventID 41 Task Category (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Log after manual restart Update 2 (task scheduler)

    Read the article

  • My Reverse DNS PTR record seems to be right, but I'm still getting bouncing email

    - by johnbr
    Hello, I have a service (statusme.com) where I let people know (for example) that their kid's soccer games are cancelled because of bad weather. We send out emails to the people who have registered. I have a second server as a backup, (vps.statusme.com) and I've set up the application to send some of the email through the second server. But I'm getting complaints from various recipient SMTP servers that the email is considered spam. So I did some investigating, and it appears that they think my reverse DNS record isn't correct. But when I look at it via various rDNS websites and instructions I found elsewhere on ServerFault, everything looks correct: jb$ host -t a vps.statusme.com 8.8.8.8 Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: vps.statusme.com has address 66.84.8.246 jb$ host -t ptr 246.8.84.66.in-addr.arpa 8.8.8.8 Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: 246.8.84.66.in-addr.arpa domain name pointer vps.statusme.com. I'm confused about what I'm doing wrong. Thanks for any suggestions.

    Read the article

  • Should I expect ICMP transit traffic to show up when using debug ip packet with a mask on a Cisco IOS router?

    - by David Bullock
    So I am trying to trace an ICMP conversation between 192.168.100.230/32 an EZVPN interface (Virtual-Access 3) and 192.168.100.20 on BVI4. # sh ip access-lists 199 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 # sh debug Generic IP: IP packet debugging is on for access list 199 # sh ip route | incl 192.168.100 192.168.100.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.100.0/24 is directly connected, BVI4 S 192.168.100.230/32 [1/0] via x.x.x.x, Virtual-Access3 # sh log | inc Buff Buffer logging: level debugging, 2145 messages logged, xml disabled, Log Buffer (16384 bytes): OK, so from my EZVPN client with IP address 192.168.100.230, I ping 192.168.100.20. I know the packet reaches the router across the VPN tunnel, because: policy exists on zp vpn-to-in Zone-pair: vpn-to-in Service-policy inspect : acl-based-policy Class-map: desired-traffic (match-all) Match: access-group name my-acl Inspect Number of Half-open Sessions = 1 Half-open Sessions Session 84DB9D60 (192.168.100.230:8)=>(192.168.100.20:0) icmp SIS_OPENING Created 00:00:05, Last heard 00:00:00 ECHO request Bytes sent (initiator:responder) [64:0] Class-map: class-default (match-any) Match: any Drop 176 packets, 12961 bytes But I get no debug log, and the debugging ACL hasn't matched: # sh log | inc IP: # # sh ip access-lists 198 Extended IP access list 198 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 Am I going crazy, or should I not expect to see this debug log? Thanks!

    Read the article

  • Django apache + mod_wsgi with virtualenv

    - by ArgsKwargs
    I have some questions running multiple Django sites on a VPS I have a server that uses openPanel to automatically create VirtualHosts within apache2. My ideal situation is that I would have multiple virtualenvs with different dependencies installed so the python dist-packages directory isn't contaminated for different Django sites. For example: /home/user/virtualenv1 /home/user/virtualenv2 My django applications reside at /var/www, so For example: /var/www/djangosite1 /var/www/djangosite2 Now I've read upon openPanel docs and figured out the best thing todo is create a django.conf file inside the mydomain.com.inc folder, which looks something like: /etc/apache2/openpanel.d/mydomain.com.inc/django.conf DocumentRoot /var/www/djangosite1/project WSGIScriptAlias / /var/www/djangosite1/project/wsgi.py WSGIDaemonProcess mydomain python-path=/home/user/virtualenv1/lib/python2.6/site-packages <Directory /var/www/djangosite1/project> Order allow,deny Allow from all </Directory> Alias /static /var/www/djangosite1/project/static-root Now my problem is that this setup seems unable to find the virtualenv site-packages thus not recognizing any dependencies available in the given virtualenv Also, commenting out this line doesn't seem to break or change a thing: WSGIDaemonProcess mydomain python-path=/home/user/virtualenv1/lib/python2.6/site-packages For example: > service apache2 start ImportError: No module named South When I install South outside the virtualenv everything works

    Read the article

  • How does Tunlr work?

    - by gravyface
    For those of you not in the US, Tunlr uses DNS witchcraft to allow you to access US-only (and UK-only stuff like BBC radio online) services and Websites like Hulu.com, etc. without using traditional methods like a VPN or Web proxy. From their FAQ: Tunlr does not provide a virtual private network (VPN). Tunlr is a DNS (domain name system) unblocking service. We’re using sophisticated technologies (a.k.a. the Tunlr Secret Sauce ©) to re-adress certain data envelopes, tricking the receiver into thinking the envelope originated from within the U.S. For these data envelopes, Tunlr is transparently creating a network tunnel from your location to our U.S.-based servers. Any data that’s not directly related to the video or music content providers which Tunlr supports is not only left untouched, it’s also not even routed through Tunlr. In order to use Tunlr, you will have to change the DNS address. See Get started for more information. I can't really wrap my head around how this works; I have always assumed that these services performed a geolocation lookup via your client IP. Just really curious as to how this works. EDIT 2 I believe they're only proxying the initial geo check and then modifying the data stream request to include your real IP address so that the streaming is direct, not proxied.

    Read the article

  • libvirt's dnsmasq does not respond to dns queries or provide dhcp

    - by Jeremy
    This is on Ubuntu 10.04 server, using KVM to run Ubuntu guests. This system has been working for a long time and I have not changed anything (other than applying security updates), but today I found dnsmasq no longer responds to requests. I cannot say how long this has been broken for me because I don't frequently use the NAT'd guests. So it could have started just after the last updates or some other event and I just now found it. I can connect to port 53 with telnet at 192.168.122.1. I've flushed ip-tables to be sure it wasn't firewall rules and that is not the problem. dnsmasq is running, virsh reports default network as stared. I can't find ANY information on troubleshooting libvirt dnsmasq except that it won't play well with other instances of dnsmasq, which is not the problem. I cannot even find where log entries might be for this service. Any ideas on where to look for more information? edit to add: I added another network and that one works fine. I guess I have a workaround but would still like to figure out how to troubleshoot this problem.

    Read the article

  • ApplicationPoolIdentity IIS 7.5 to SQL Server 2008 R2 not working.

    - by Jack
    I have a small ASP.NET test script that opens a connection to a SQL Server database on another machine in the domain. It isn't working in all cases. Setup: IIS 7.5 under W2K8R2 trying to connect to a remote SQL Server 2008 R2 instance. All machines are in the same domain. Using the ApplicationPoolIdentity for the web site it fails to connect to the SQL Server with the following: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. However if I switch the Process Model Identity to NETWORK SERVICE or my domain account the database connection is successful. I've granted the \$ access in SQL Server. I am not doing any sort of authentication on the web site, it is just a simple script to open a connection to a database to make sure it works. I have Anonymous Authentication enabled and set to use the Application pool identity. How do I make this work? Why is the ApplicationPoolIdentity trying to use ANONYMOUS LOGON? Better yet, how do I make it stop using the Anonymous logon?

    Read the article

  • Courier-imap login problem after upgrading / enabling verbose logging

    - by halka
    I've updated my mail server last night, from Debian etch to lenny. So far I've encountered a problem with my postfix installation, mainly that I managed to broke the IMAP access somehow. When trying to connect to the IMAP server with Thunderbird, all I get in mail.log is: Feb 12 11:57:16 mail imapd-ssl: Connection, ip=[::ffff:10.100.200.65] Feb 12 11:57:16 mail imapd-ssl: LOGIN: ip=[::ffff:10.100.200.65], command=AUTHENTICATE Feb 12 11:57:16 mail authdaemond: received auth request, service=imap, authtype=login Feb 12 11:57:16 mail authdaemond: authmysql: trying this module Feb 12 11:57:16 mail authdaemond: SQL query: SELECT username, password, "", '105', '105', '/var/virtual', maildir, "", name, "" FROM mailbox WHERE username = '[email protected]' AND (active=1) Feb 12 11:57:16 mail authdaemond: password matches successfully Feb 12 11:57:16 mail authdaemond: authmysql: sysusername=<null>, sysuserid=105, sysgroupid=105, homedir=/var/virtual, [email protected], fullname=<null>, maildir=xoxo.sk/[email protected]/, quota=<null>, options=<null> Feb 12 11:57:16 mail authdaemond: Authenticated: sysusername=<null>, sysuserid=105, sysgroupid=105, homedir=/var/virtual, [email protected], fullname=<null>, maildir=xoxo.sk/[email protected]/, quota=<null>, options=<null> ...and then Thunderbird proceeds to complain that it cant' login / lost connection. Thunderbird is definitely not configured to connect through SSL/TLS. POP3 (also provided by Courier) is working fine. I've been mainly looking for a way to make the courier-imap logging more verbose, like can be seen for example here. Edit: Sorry about the mess, I've found that I've been funneling the log through grep imap, which naturally didn't display entries for authdaemond. The verbose logging configuration entry is found in /etc/courier/imapd under DEBUG_LOGIN=1 (set to 1 to enable verbose logging, set to 2 to enable dumping plaintext passwords to logfile. Careful.)

    Read the article

  • Exchange 2003: recover mailbox when migrated to 2007

    - by lyngsie
    We have migrated almost all of our mailboxes from Exchange 2003 to 2007 so both are still up and co-existing in our domain. One mailbox is missing some mails, and I tried to recover from an Exchange 2003 backup using ExMerge as usual, but it throws an error: Error opening message store (MSEMS). Verify that the Microsoft Exchange Information Store service is running and that you have the correct permissions to log on. (0x8004011d) This should be normal when a mailbox has been migrated to 2007 and you try to recover a 2003 backup as stated here: http://www.petri.co.il/restoring-exchange-2003-mailboxes-exchange-2007-exmerge.htm We then tried the solution given in the article (copying the value "homemdb" for the user and pasting this in "msExchOrigMDB" for the Recovery Storage Group object in adsiedit). The error unfortuntely persists. So my question is, how can I extract a .pst from a mailbox in the recovery storage group when both Exchange 2003 and 2007 are running? I assume this is why the solution in the article didn't work. If no solution is possible using regular tools (exmerge, eseutil, etc.) which third-party tool should we choose - preferably the cheapest as we only need this one mailbox recovered.

    Read the article

  • Backup solution to backup terabytes and lots of static files on linux server?

    - by user28679
    Which backup tool or solution would you use to backup terabytes and lots of files on a production linux server ? Note that the files are all different and almost never modified, and usage is mostly adding files, so data volume is today 3TB growing all the time at around +15GB/day. Please do not reply rsync. Basic unix tools are not enough, rsync does not keep history, rdiff-backup miserably fails from time to time and screw the history. Moreover these are all file based backup, which put a lot of IOwait just to browse directories and query stat(). But i guess, except R1Soft CDP, there is no way around that. We tried R1Soft CDP backup, which is block level backup, and it proved good and efficient for all our other servers, but systematically fails on the server with 3 terabytes and gazillions of files. That is already more than 2 months that the engineers of R1Soft and datacenter are playing a hot ball game... and still no backup except regular rsync We never tried big commercial solutions, except R1Soft CDP since it was provided as an optional service by the datacented hosting our servers.

    Read the article

  • Startup script for Red5 on Ubuntu 9.04

    - by user49249
    I am creating startup script for Red5 on Ubuntu. Red5 is installed in /opt/red5 Following is a working script on a CentOS Box on which Red5 is running [code] ==========Start init script ========== #!/bin/sh PROG=red5 RED5_HOME=/opt/red5/dist DAEMON=$RED5_HOME/$PROG.sh PIDFILE=/var/run/$PROG.pid # Source function library . /etc/rc.d/init.d/functions [ -r /etc/sysconfig/red5 ] && . /etc/sysconfig/red5 RETVAL=0 case "$1" in start) echo -n $"Starting $PROG: " cd $RED5_HOME $DAEMON >/dev/null 2>/dev/null & RETVAL=$? if [ $RETVAL -eq 0 ]; then echo $! > $PIDFILE touch /var/lock/subsys/$PROG fi [ $RETVAL -eq 0 ] && success $"$PROG startup" || failure $"$PROG startup" echo ;; stop) echo -n $"Shutting down $PROG: " killproc -p $PIDFILE RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$PROG ;; restart) $0 stop $0 start ;; status) status $PROG -p $PIDFILE RETVAL=$? ;; *) echo $"Usage: $0 {start|stop|restart|status}" RETVAL=1 esac exit $RETVAL [/code] What do I need to replace for Ubuntu in the above script. My Red5 is in /opt/red5/ and to start it manually I always do /opt/red5/dist/red5.sh from Ubuntu As I did not find rc.d/functions on Ubuntu on my laptop also /etc/init.d/functions I did not existed. I would like to be able to use them with service as Red hat distributions do. I checked /lib/lsb/init-functions.

    Read the article

  • How to record tv to network share with Windows Media Center?

    - by Peterdk
    Well, you would think that Windows 7's new MediaCenter would be up to the task of recording your TV to a network share/drive. Too bad, it looks like it's just not possible. I have a windows 2008 R2 server, and a Windows 7 machine with a TV card. Since my server has 2TB of storage, it would be nice to record directly to it's networked drive. (I mounted it as Z:). I tried the following: Selecting it in Media Center Itself: Not working. Not available. Editing the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Service\Recording , setting RecordPath to Z:\TV. Not working. Editing the registry: setting RecordPath to \\server\TV. Not working. Creating a Symlink (mklink \D) to Z:\TV and \\server\TV and setting that in the registry as RecordPath. Currently I am out of options. I could ofcourse Install Windows7 on my server, but I have no license for that, and my windows 2008 r2 is free from dreamspark. Are there people that are succesfully recording to a networked drive/storage? edit I also need to mention that I need to be able to acces the stored files from other PC's, like my laptop. So iSCSI is great for recording, but it looks like you can't access iSCSI devices from multiple PC's. Looks like sharing a iSCSI device is out of the question, so: Are there workarounds to get this thing recording to my network drive?

    Read the article

  • overriding default scheduler for blkio requests in cgroups

    - by Aamir Mushtaq
    I am trying to optimize a set of servers that have to reside on single machine. i.e. i can have multiple application server, a DB server and of course a samba server as well in same instance. Now I was looking into several optimizing options available to me. In my quest, i did my tuning of the network stack. coming to the CPU, MEMORY and the BLKIO tweaks, i am using CGROUPS. The problem i am facing is that for enhanced performance in the nature of the applications that i am running, the CFQ Scheduler that is implemented for the BLKIO subsystem is not optimal. I was looking more for a Deadline Scheduler because that will serve my purpose well. My question is whether it is possible for us to change the scheduler in the kernel compilation itself for the BLKIO to Deadline and it will reflect in my usage of [CGROUP hierarchies][3]? Since when running the service cgconf, a new fs is mounted and i dont want it to revert to CFQ scheduler. I also welcome any suggestions that will enable me to have more control over my resources.

    Read the article

< Previous Page | 789 790 791 792 793 794 795 796 797 798 799 800  | Next Page >