Search Results

Search found 39497 results on 1580 pages for 'two shoes'.

Page 796/1580 | < Previous Page | 792 793 794 795 796 797 798 799 800 801 802 803  | Next Page >

• Establish direct cable connection between Windows 8 PCs in home network

  - by Marie. P.

  I'm running two PCs, a desktop and a laptop with Windows 8 Release Preview ("Build 8400"). They are connected to the same router in infrastructure mode, thereby having wireless internet. Due to often file synchronization between the machines I want to establish a cable connection that allows direct file transfer, without needing to use the wireless. When I plug in the cable (normal, not cross-over), I see in "Control Panel\Network and Internet\Network Connections": "Ethernet - unidentified Network" on both PCs. Transferring a file between both still only uses the WiFi via the Router. I noticed that when turning off the wifi on one PC, I can set up a shared internet connection that will work via Ethernet-cable, but since sometimes only one PC runs, sometimes the other one, I do not want to have the internet of one machine to be dependent on the other one being switched on. I do not have a crossover-cable, but since I did connect the PCs already successfully (just without both being on the internet), I'm sure that this should also work with a normal ethernet cable.

  Read the article

• Users will be kicked out of a network drive (DFS)

  - by user71563

  Hi, In early January 2011, we completely switched to Windows Server 2008 R2 and Windows 7. On our domain controller set up a DFS is that the users as "Z: drive" is displayed. The DFS was it in the same way during our time with Windows Server 2003 R2 and Windows XP. At the time it has always worked without problems. Since Windows 7, we have sometimes the case that when a user accesses to the Z drive, the Explorer will return to the workplace without a user can do. After two to three trials of the Explorer remains in the network drive and the users work. This phenomenon occurs irregularly and you can not restrict exactly why. In the event log at the time no obvious entries are logged. Does anyone know the problem or has had similar experiences? I am grateful for any help. Greetings, sY!v3Rs

  Read the article

• Eliminating Windows 7 user tracking registry writes

  - by caffiend

  Windows 7 continues the practice of saving user actions in the registry. I'd like to disable this practice both to avoid reg-file fragmentation and SSD wear, as well as being uncomfortable with programs being able to quickly analyze my usage habits. Even with the "Turn off user tracking" policy enabled, there are at least two areas that still contain user tracking: HKCU\Software\Classes\Local Settings\MuiCache This key stores a cache of most-recently accessed strings, including most-recently ran exe descriptions. MKCU\Software\Classes\Local Settings\Software\Microsoft Windows\Shell\BagMRU This directory stores the most recently viewed folders along with timestamps. Are there additional policy settings/registry entries to disable these writes? If not, is it possible to make these entries Volatile? Would it be practical to create a temporary hive (eg, on ramdisk) and map it over this location?

  Read the article

• Can't access internet with 32-bit browser(Chrome, FF, IE)! The 64-bit version of IE on Win 7 works f

  - by Sarveshwar

  I had installed Kaspersky AV 2010 two days ago. Everything was fine until I was not able to access the internet a few minutes back with the 32 bit browsers I have installed - Chrome, Firefox and the 32 bit IE. Then I see that utorrent is working fine!! So again I checked with the 64 bit IE and I could access the internet. I am currently using IE 64 bit to access superuser. Please help! I have uninstalled the KAV 2010. I thought that was the problem. Is this any virus or something? Also, whenever any browser (except IE 64), the screen freezes. Nothing except the browser works! And after the browser is closed, everything comes back to normal. Thanks!

  Read the article

• How to compare differences between directories (linux)

  - by Phil

  I have two directories - one from earlier backup and second from newest backup. How do i compare what changes were made to files in directory from newest backup on Linux? Also how do i display changes in for example text and php files - i'm thinking about something like revision history on wikipedia where you see old version on one side of the screen and newest version on other and changes are highlighted. How do i achieve something like that? edit: How do i also compare remote dir with local?

  Read the article

• Can I copy from vim to another window without +xterm-clipboard?

  - by GorillaSandwich

  I'm using Ubuntu and vim. I can copy text from vim and paste it into another window by highlighting it in vim, then middle-clicking in the other window. This works fine when I'm on my local machine. I can also copy into the system register by highlighting text and yanking to the system register. (For example, Shift-V JJ "+ y to go into linewise visual mode, highlight two lines, select the '+' register and yank.) It's then available to paste into other windows. However, if I ssh into my web host, I can't do either of these. (They use some flavor of Linux - I think it's CentOS.) In vim, if I type :version, my local version shows +xterm_clipboard, but the host's version shows -xterm_clipboard. I don't have sudo rights there. Is there any way to be able to copy from their vim without getting them to tinker with the installation?

  Read the article

• Is it possible to upgrade HTC HD2 to Windows Mobile 7? [closed]

  - by Ladislav Mrnka

  I have HD2 over one year and I have to say it was pretty wrong purchase. Both HTC HW and MS OS (Windows Mobile 6.5) are somehow crappy. I had several crashes wich resulted in hard reset (no flashing and almost no additionally installed applications) and phone was under repair two times (2x replaced motherboard and 1x replaced dislay). After these reapirs at least HW works pretty well but OS is still bad. I would like to upgrade the phone to Windows Mobile 7. I'm not looking for some flashing (I already saw some guides). I'm ready to pay for upgrade to have it legal. Is it possible? Buying new phone just to have SW upgrade is ridiculous. Btw. My primary phone is iPhone 4 and I think on iPhone 3GS it is possible to upgrade OS iOS 4 so I would like to see similar possibility with Windows Mobile.

  Read the article

• Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose? [migrated]

  - by Moshev

  I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

  Read the article

• How does the process of disk partitioning actually work on most HDD's?

  - by Dark Templar

  From what I know of most laptops, you are able to "partition" your disk into as many other drives as you please. The more you cut it up, the smaller your partitions are, but from an organizational point of view, this may be desirable... I was wondering how the filesystem itself becomes partitioned underneath the partitions visible to the user. For instance, a laptop disk is usually divided into platters, each with two surfaces. The surfaces are further divided into "tracks". I guess what I am asking is, is it possible to identify how the disk itself keeps track of partitions? (whether each partition has its own platter? each partition has its own set of adjacent tracks? or some other configuration, or whether the data from different partitions are just randomly interleaved and scattered throughout the disk?)

  Read the article

• 'DNS service isn't responding' in windows 7

  - by pradeeptp

  Hi All, I bought a brand new Dell Studio 1558 just last week. It has windows 7 home premium 64-bit installed on it. My friend who is occupying the adjacent room has a laptop with windows XP. Both of us are connecting to the same wireless router of the hotel. My friend is able to connect to the wireless network without any trouble, but when I try to connect, I get the error "DNS service isn't responding". I met two more people in the same hotel with win XP laptop and they too dont have any problem. I have gone to possibly all the forums and website but I haven't been able to fix this error :(. I have done all the basic troubleshooting but I have no luck yet. Pls help. Following is one forum where the problem seem to have been trouble shooted but not for all. http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/eeb84518-903d-46d1-9398-80cf211878d7

  Read the article

• Is rsync --delete safe in case of disk failure

  - by enedene

  I have two data hard drives on my Linux server and I use second as a backup for a first drive. I use rsync for that purpose. An example would be: rsync -r -v --delete /media/disk1/ /media/disk2/ What this does is that it copies every file/directory from /media/disk1/ to /media/disk2/ but also deletes any difference. For example, lets say that files A and B but not file C are on disk1, and on disk2 there is no A and B files, but there is C. The result would be that after the command on disk2 I'd have files A and B, but file C would be deleted, just like on disk1. Now, a rather disastrous scenario had crossed my mind; what if disk1 dies, system continues to work since system files are on my system disk, but when rsync tries to backup my data on disk2 from broken disk1, it deletes all the files from disk2 because it can't read anything on disk1. Is this a possible scenario, or is there a protection from it build in rsync?

  Read the article

• Soft links between samba profile and profile.V2

  - by Alex Rose

  I am currently using a samba server to host windows sessions. For the moment, every machine runs windows XP, but in an upcoming hardware upgrade, I will have new Windows 7 machines installed. The problem is that the user directory changed from XP to 7 (for instance 'My Documents' became 'Documents'). To solve that, samba created a folder called profile.V2, which contains files and folders for Windows 7. Now I would like to link the two profiles folders ('profile' from windows XP, 'profile.V2' from windows 7) so that a user can logon from a XP or 7 machine and still have access to the same files. I tried to create softlinks between folder pairs ('Documents' -­­ 'My documents') and it seems to work. My question is : is it likely to create issues in the future?

  Read the article

• Does a single LACP channel over multiple switches increase redundancy?

  - by Sirch

  I am curious for opinions, findings, or evidence that having multiple interfaces bonded using LACP to ports in multiple switches can increase redundancy. Previously bonded interfaces have always been to a single switch, with a redundant channel to another port. Without getting into vendor specifics, my thought is that as this is a single LACP, the likelihood that an event or change could lead to a wide service outage. Without having the spare equipment or time to test this single channel over diverse switches, could anyone with a greater networking knowledge than myself, tell me if there a network side event that would bring down the network connectivity to a server that had created a bonded interface to two ports on separate switches? Does the use of bonded ethernet channels across multiple switches (that we are advised that we can use) from the server, provide both improved throughput (unquestionably), and improved redundancy (uncertain). Could/would network events such as switch failure, port migration, patching, recovery, etc, cause the channel for both server network interfaces to be unavailable? Thanks in advance.

  Read the article

• Mount linux partition as Windows network share over internet

  - by CptEO

  I have a Linux server running RHEL 6. I have two Windows servers. All servers are connected directly to the web with an external IP, they are not in a local lan. What I would like to achieve is to setup the Linux server so that it offers a single share (the whole partition) that can be mounted as network drive within Windows. I don't want to use any 3rd party software to access the linux server because I want to use the linux server as a backup for Bare Metal Restore. In order to do so, I need to be able to access the linux partition from within the Windows Recovery Enviroment where I cannot install any 3rd party software. The linux server should only be accessible from given IP addresses (e.g. the 2 windows servers). Does anyone know if the setup I would like to have is possible?

  Read the article

• Motherboard: Intel S5520HCR s1366 SSI EEB

  - by Crazy_Bash

  I'm building a storage server for online video streaming. I thought about adding two SSD drive for a OS. other 15*(12 SATA & 3 SSD) drives i want to build with aufs XFS and ethernet 4GB/sec network. But I'm confused a little. S5520HCR board supports 6, SATA/300, RAID: 0, 1, 10, Intel ICH10R. Does it mean i can use SATAIII HDD? I'm planing on buying SEAGATE SV35 Series (3.5, 3??, 64??, SATA III-600). also my Chassis supports up-to 16 sata and the motherboard only 6 what kind of sata controller should i use? What's better in terms of performance 1366 or 2011 socket? My server so far: AIC RSC-3EG-80R-SA1S-2 3U Motherboard: Intel S5520HCR s1366 SSI EEB Kingston DDR3 8192Mb PC3-10600 1333MHz (KVR1333D3N9/8G) Seagate 3000GB 64MB 3.5" 7200rpm SATAIII (ST3000DM001) Kingston 480GB SSD 2.5" SATAIII Intel E1G44HTBLK Intel Xeon E5606 2133MHz/L3-8192Kb/QPI s1366 tray SERVER ACC CARD SAS PCIE 16P HBA 9201-16I LSI00244 SGL LSI

  Read the article

• Kerberos authentication between 2 applications

  - by Spivi

  We work on a server 2003 and server 2008 R2 enviroment. I'm familiar with the basic usage of the Kerberos protocol where the protocol authenticates a client when he tries to use a shared resource (server, folder, printer, etc.). We have three distinct and independent .NET applications that we develop inhouse (app A, app B & app C) but they need to communicate for a given reason (A recieves messages only from B and C and C recieves messages only from B). Is it possible to configure the Kerberos services to authenticate messages/request between two .NET apps ? (Instead of a user-server authentication, we will have an application-application authentication)

  Read the article

• What causes an MSI package to launch following application install

  - by Damo

  We have an application we have developed, it gets deployed via an MSI I built. The MSI has been used in many locations, on many different builds. On one customers site, on occasion we are seeing some odd occurrences of data from the registry going missing. The 'data' from some select registry keys disappears and we have little idea why. One interesting point is that the MSI installer for our application has been seen in passive mode during OS load / load of our application on stat-up. The MSI loads a progress bar then disappears, following this our application loads up. It has been noted that following this the data disappears from our registry. However I can't say these two events are absolutely linked, it could have been missing before this event. What causes the MSI for an application to launch way after initial installation. How can it be prevented (correctly)

  Read the article

• Failover NIC with Windows 7 running Apache Server

  - by Benjamin Jones

  I have a Apache Server running on a Windows 7 Desktop for a internal website (Intranet). I am trying to figure out how I can make this system as failover safe as possible. One thing I want to do is use the 2nd NIC card that is currently disable. I only have one gateway address to my router. I do not have any computer running a Server O/S. If NIC1 crashes by chance(just humor me!), how could NIC2's IP take on the host name (I have mapped in host file) . I don't really care if the static IP of NIC2 changes seeing that the host name is the only thing I need. Could I add two IP's to the host file, with same host email and maybe create some script that will run IF NIC 1 fails? OR is there any failover software that will do this for me?

  Read the article

• How to get the spec of a machine on Linux?

  - by machinePurchaser

  I am interested in getting the spec of a machine, because I am thinking getting a similar server. What I am mostly interested in knowing is the number of cores / CPUs / etc., the amount of memory, the speed of the CPUs, the CPU cache size, and any other detail which is important for performance. My question is two-fold: Which parameters should I be interested in other than the ones I specified above? Is there an easy way to read them off the machine in Linux? cat /proc/cpuinfo reveals a lot about the CPUs, for example... What about memory (would rather not rely on top), etc?

  Read the article

• Does OEM partition stores Windows 7 serial key ?

  - by Mahesha999

  Does OEM partition stores the serial key which is grabbed by the Win 7 setup done from the disk provided with laptop. I realized that when you install clean system from Windows 7 disk you get with laptop, it grabs the serial key or it doesn't ask one. So from where it gets that serial key. Is it the OEM partition or anything else? Or the recovery partition stores the key? What all the things these two partitions do store in them?

  Read the article

• Spam is Killing Me - Can I use GMail as a spam filter?

  - by kirkouimet

  I'm getting at least 50 Viagra ads a day and it's driving me insane. I currently have a hosted MS Exchange account and a Gmail account. My Gmail account forwards to my Exchange account. Both of my addresses are used evenly, and it has been really nice to have all of my e-mail end up in my Exchange box. I like replying from one address consistently, which is my Exchange address. Spam sent to my Gmail address is always caught, where spam sent to my Exchange is getting passed straight through to me. I don't want to have two spam filtration systems that have quarantines that I need to check frequently for false positives. Here is my question: Can I setup my MX records such that all e-mail sent to my Exchange address is forwarded to my Gmail account, which will then forward it to my Exchange account? Kind of like using Gmail as the middle man.

  Read the article

• windows printer spool gets stuck with file at 64kb from linux and mac

  - by Juan Diego

  Hi I have two printers one on a file server with windows 2003, and other with windows XP. The thing is that when i try to print from my machine, my file stays in queue for ever, it says 64kb out of whatever the file i send. I have seen similar problems with some machines that run on Mac OS X. The windows machines apparently have no problems printing. They are not connect through active directory, just the network. In the past I have seen people install non microsoft windows Printer server on windows, i dont remember the name of any of the programs. I have being googling a lot and have not found anything to replace the microsoft print spooler service, maybe i am mistaken. Everyday I have to restart the print spooler service i even created a bat file for it. I am out of ideas here.

  Read the article

• Windows and domain suffix addition

  - by grawity

  I have a DNS domain and host it on my own server. My desktop PC (Windows XP) is configured to have mydomain.tld as its primary DNS suffix. Now, when the system tries to resolve any domain - stackoverflow.com, for example - it tries with the suffix added first, even if the name has periods in it. In other words, it tries stackoverflow.com.mydomain.tld. before stackoverflow.com.. Is this valid according to DNS standards and common sense? Is there anything I can do to prevent it, other than removing the prefix completely? (I still want it to be appended to single-component hostnames. Currently I have two prefixes . and mydomain.tld. configured, but it isn't very fast when resolving foohost.)

  Read the article

• Installing raid controller forces reinstall of Windows Server 2008

  - by Tyler

  So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

  Read the article

• Control cell reference increment when dragging a forumula in Libre Office Calc (3.5)

  - by Chuck

  Using Libre Office Calc (3.5) and have a question. When copying a formula that references cells into multiple empty cells the default is to increment each cell reference by one column or row, depending on the direction that the formula is being drug. A formula '= 1 + A1' drug horizontally changes to '= 1 + B1' when pulled one cell to right and '=1 + A2' when pulled one cell down. Is there a way to control increase the increment of the referenced cell? Is is possible to have a formula '= 1 + A1' that effectively changes to '= 1 + A3' when drug down one cell, '= 1 + A5' when drug down two cells, etc? If it matters, I am trying to take a constantly updating master list of data that is organized by dates (Wednesdays and Saturdays) and create separate spread sheets for each day of the week that can be updated by only pulling down the formula into the next cell. My attempts at using the 'lookup' function, 'offset' function, and creating a sort column in Libre Office Calc are thwarted by my inability to figure out how to get around the single step increment when pulling a formula down into the next cell. Thanks

  Read the article

< Previous Page | 792 793 794 795 796 797 798 799 800 801 802 803  | Next Page >