bashar kernel - Page 8 - Developer IT

Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169 with 2.6.39 kernel

- by Dean Thomson

I've been getting an issue since upgrading to 2.6.39 in Natty from the Kernel-PPA repository. When I do a sudo update-initramfs -u I get the following error message. update-initramfs: Generating /boot/initrd.img-2.6.39-0-generic-pae W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169 I did notice that firmware wasn't in the allocated directory. Does anyone know where to get the firmware files for this.

Read the article

Save kernel on Acer Aspire One270 with Ubuntu 12.10 - Booting Issues

- by Sascha Klocke

I did search the forums for quite some time, yet did not find any answer to my problem... I have an Acer Aspire One D270 with Windows 7 Starter and I've installed Ubuntu using the Wubi installer. When I boot to Windows 7, everything works fine, however, when I try to run Ubuntu, it gets stuck on a black screen at stopping kernel messages (or other lines), followed by some lines with [ 20.....] and won't continue... Could anyone point me to a solution to this problem?

Read the article

Linux kernel regression on power usage

- by dago

Webupd8 reported this power management fix for the 2.6.38 Linux kernel regression: Add the following to the boot grub line "pcie_aspm=force" My question - how does this suggested fix differ from this hint from powertop: Suggestion: Enable Device Power Management by pressing the P key, which execute the following action: find /sys/devices/pci* -path "*power/control" -exec bash -c "echo auto > '{}'" \;

Read the article

Problems to boot on Natty with Kernel 2.6.39.1

- by Jorge Pinho

I've installed this new Kernel version (2.6.39.1) and it seems to me that isn't stable. When i boot my laptop it blocks.... and it shows a Fail on Graphics... What is the problem? I've installed proprietary drivers FGLRX. My Laptop is a Acer Aspire 5542G AMD64 bits ATI Radeon HD4570 4gb Memory I'll wait for an answer, please... Here it is my proprietary graphics: This installation problem shows me this:

Read the article

How do I patch a kernel bug?

- by Primož Kralj

Sometimes I can't boot my laptop - it gets stuck here: Then I have to do a hard-reset and it's fine. I checked the boot logs and this is what I think it's causing it (nevermind the timestamp inconsistencies): [38.377595] BUG: unable to handle kernel NULL pointer dereference at (null) [38.377821] IP: [<ffffffffa01f6d7b>] r600_pcie_gart_tlb_flush+0xeb/0x110 [radeon] [38.378065] PGD 121491067 PUD 121492067 PMD 0 [38.378214] Oops: 0000 [#1] SMP Here is the full log. I found the patches but I have no idea about which to use and how.

Read the article

Ubuntu 14.04 has a bunch of old kernel directories

- by NoBugs

I saw in Disk Usage Analyzer I have 3.13.0-xx for 8 minor versions of the kernel in /lib/modules. Each is around 200MB. I remember having to go through in Synaptic and remove those old Linux versions before, but hasn't this bug been fixed? Is it just paranoid default setting, that perhaps all of the last half dozen kernels might become unbootable, so it keeps each old one around? Or do I have some developer setting enabled by accident that causes this?

Read the article

" this kernel required an X86-64 CPU, but only detected a i686 CPU"

- by jy19

I recently decided to use Virtualbox to run Ubuntu, but I get the message this kernel required an X86-64 CPU, but only detected a i686 CPU I've already enabled virtualization in BIOS, but that doesn't seem to work. Many other solutions suggest that I should download the 32-bit version, and not the 64-bit. I'm not sure about that though, since my computer clearly says "64-bit operating system" under systems. But I might just be mistaken.

Read the article

How do I install on an UEFI Asus 1215b netbook?

- by Tarek

I'm trying to install Ubuntu 11.10 on a UEFI netbook Asus 1215b using an USB stick. I created a fat32 efi partition of 100MB, 2GB swap, and 2 ext4 partitions (for root (/ ) and /home, respectively). While installing, Ubuntu switches to CLI and starts running efibootmgr. After a few commands (sadly I don't have a screen grab), it stops displaying text but it's still running judging by the HDD led. Then, there's a weird graphic glitch and the screen turns off (HDD led still indicating activity). Finally, it just stops, but doesn't turn off. Not even a hard reboot works (holding down the power button a few secs). I have to plug the netbook off and remove the battery. After that, it still doesn't boot Ubuntu... Anyway, what can I do? I'm considering following the footsteps here and here. Edit: here is the syslog $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] BUG: unable to handle kernel paging request at 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] IP: [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] PGD 14ecc067 PUD 0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Oops: 0000 [#1] SMP $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CPU 0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Modules linked in: cryptd aes_x86_64 ufs qnx4 hfsplus hfs minix ntfs msdos xfs reiserfs jfs bnep parport_pc rfcomm dm_crypt ppdev bluetooth lp parport joydev eeepc_wmi asus_wmi sparse_keymap uvcvideo videodev v4l2_compat_ioctl32 snd_hda_codec_realtek snd_seq_midi snd_hda_codec_hdmi snd_hda_intel snd_hda_codec arc4 snd_rawmidi snd_hwdep psmouse snd_pcm snd_seq_midi_event ath9k serio_raw sp5100_tco i2c_piix4 k10temp snd_seq mac80211 snd_timer ath9k_common ath9k_hw snd_seq_device ath snd cfg80211 soundcore snd_page_alloc binfmt_misc squashfs overlayfs nls_iso8859_1 nls_cp437 vfat fat dm_raid45 xor dm_mirror dm_region_hash dm_log btrfs zlib_deflate libcrc32c usb_storage uas radeon video ahci libahci ttm drm_kms_helper drm wmi i2c_algo_bit atl1c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Pid: 28432, comm: efibootmgr Not tainted 3.0.0-12-generic #20-Ubuntu ASUSTeK Computer INC. 1215B/1215B $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RIP: 0010:[<ffff880066d44c1f>] [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RSP: 0018:ffff88005e2cbab0 EFLAGS: 00010082 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RAX: 00000000ffe1867c RBX: 0000000000000009 RCX: 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RDX: 0000000000000000 RSI: ffff88005e2cbbea RDI: ffff88005e2cbb40 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RBP: 00000000ffe1867c R08: 0000000000000000 R09: 0000000000000084 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] R10: ffffc9001101ff83 R11: ffffc90011018685 R12: 0000000000000001 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] R13: 0000000000000000 R14: ffffc9001101867c R15: ffff88005e2cbbe1 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] FS: 00007f9cdde13720(0000) GS:ffff880066a00000(0000) knlGS:0000000000000000 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CR2: 00000000ffe1867c CR3: 000000002dace000 CR4: 00000000000006f0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Process efibootmgr (pid: 28432, threadinfo ffff88005e2ca000, task ffff880014f0dc80) $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Stack: $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ffffc90011010000 ffff88005e2cbac8 0000000000010000 ffff880066d4401d $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] 000000000000007c ffff880009e84400 0000000000000090 ffff880066d45738 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ffffc9001101867c ffff880066d4331c 0000000000000009 ffffc9001101867b $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Call Trace: $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815e9efe>] ? _raw_spin_lock+0xe/0x20 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9c2d>] ? open+0x10d/0x1b0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff8116554b>] ? __dentry_open+0x2bb/0x320 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9b20>] ? bin_vma_open+0x70/0x70 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815e9efe>] ? _raw_spin_lock+0xe/0x20 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811849ee>] ? vfsmount_lock_local_unlock+0x1e/0x30 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff8104303b>] ? efi_call5+0x4b/0x80 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81042a7f>] ? virt_efi_set_variable+0x2f/0x40 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff814bb125>] ? efivar_create+0x1e5/0x280 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9d63>] ? write+0x93/0x190 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9de4>] ? write+0x114/0x190 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81167813>] ? vfs_write+0xb3/0x180 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81167b3a>] ? sys_write+0x4a/0x90 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815f22c2>] ? system_call_fastpath+0x16/0x1b $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Code: ec 01 75 f0 41 bc 01 00 00 00 e8 e5 fb ff ff e8 e4 fc ff ff 33 c0 44 0f b7 c0 66 3b c3 73 20 41 0f b7 c0 41 0f b7 d0 03 c5 8b c8 <8a> 00 42 38 04 3a 75 0a 66 45 03 c4 66 44 3b c3 72 e2 33 c0 66 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RIP [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RSP <ffff88005e2cbab0> $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CR2: 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ---[ end trace 493844b002da4787 ]---

Read the article

kernel get stack when signalled

- by yoavstr

hi there i write readers and writers where the kernel have to syncronize between them and block writer who already read a massage when i am in the queue waiting I get signal so I do the fallowing while (i_Allready_Read(myf) == ALLREADY_READ || isExistWriter == false ) //while (!(i_Allready_Read(aliveProc,current->pid))) { int i, is_sig = 0; printk(KERN_INFO "\n\n*****entered set in read ******\n\n" ); if (i_Allready_Read(myf) == ALLREADY_READ ) wait_event_interruptible (readWaitQ1, !i_Allready_Read(myf)); else wait_event_interruptible (readWaitQ1, isExistWriter); //printk(KERN_INFO "Read Wakeup %d\n",current->pid); for (i = 0; i < _NSIG_WORDS && !is_sig; i++) { is_sig = current->pending.signal.sig[i] & ~current->blocked.sig[i]; } if (is_sig) { handledClose(myf); module_put (THIS_MODULE); return -EINTR; } } return 0;//success } inline void handledClose(struct file *myf)//v { /* *if we close the writer other writer *would be able to enter to permissiones */ if (myf == writerpid ) { isExistWriter = DOESNT_EXIST; //printk(KERN_INFO "procfs_close : this is pid that just closed %d \n", writerpid); } /* *else its a reader so our numofreaders *need to decremented */ else { removeFromArr(myf); numOfReaders--; } } and my close does nothing ... what did i do wrong?

Read the article

Error:couldn't read file-Kernel panic

- by Thanos

I have just installed ubuntu 12.04.1. To be honest I had to run installation several times until it was finished fine. When I finally managed to install it properly, I power on the laptop and the grub shoed up! I selected ubuntu generic. It takes some time to load and when it does I get an error message stating that error: couldn't read file Press any key to continue If I press any button nothing happens. If a leave it there, in a short while there is a black screen loading which gives some weird messages [0.946710] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (0,0) [0.946755] Pid: 1, comm: swapper/0 Not tainted 3.2.0-29-generic #46-Ubuntu [0.946792] Call Trace: [0.946831] [<ffffffff81640ec8>] panic+0x91/0x1a4 [0.946869] [<ffffffff81cfc01e>] mount_block_root+0xdc/0x18e [0.946909] [<ffffffff81002930>] ? populate_rootfs_wait+0x300/0x9d0 [0.946947] [<ffffffff81cfc257>] mount_root+0x54/0x59 [0.946982] [<ffffffff81cfcec9>] prepare_namespace+0x16d/0x1a6 [0.947019] [<ffffffff81cfbd63>] kernel_init+0x153/0x158 [0.947094] [<ffffffff81cfbc10>] ? start_kernel+0x3bd/0x3bd [0.947129] [<ffffffff81664030>] ? gs_change+0x13/0x13 The thing is that the laptop isn't mine. A friend tried to dual boot ubuntu alongside windows 7 but he didn't succeed. Ubuntu option was in grub, but when you tried to boot it rebooted from the start. So from a Live CD I erased ubuntu, started windows to check if something went wrong, and fortunately everything was OK. Windows started normally! So I tried to install ubuntu. Before installation was completed the installer crashed! I was afraid that he would lost windows, something that was true... At that point I tried to install windows but whichever distro(XP, 7{home, proffessional, ultimate},8) I tried it could never reach the end. So I tried to reinstall ubuntu but I was facing those weird messages. What can I do to move on? ______________________________________________________________________ EDIT1: I tried to check and fix(if possible) with GParted it took a lot of hours,although gparted displays only 01:14, I restarted the system and now I get not exactly the same messages. Numbers in braces [ ] are different [0.818189] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (0,0) [0.818235] Pid: 1, comm: swapper/0 Not tainted 3.2.0-29-generic #46-Ubuntu [0.818272] Call Trace: [0.818312] [<ffffffff81640ec8>] panic+0x91/0x1a4 [0.818351] [<ffffffff81cfc01e>] mount_block_root+0xdc/0x18e [0.818391] [<ffffffff81002930>] ? populate_rootfs_wait+0x300/0x9d0 [0.818428] [<ffffffff81cfc257>] mount_root+0x54/0x59 [0.818464] [<ffffffff81cfcec9>] prepare_namespace+0x16d/0x1a6 [0.818501] [<ffffffff81cfbd63>] kernel_init+0x153/0x158 [0.818574] [<ffffffff81cfbc10>] ? start_kernel+0x3bd/0x3bd [0.818610] [<ffffffff81664030>] ? gs_change+0x13/0x13 What on earth is going on? ______________________________________________________________________ EDIT2: I forgot to mention that my friend gave a punch to his laptop during a game. After that his cooler became to make a weird noise so I checked and it is a bit tortuous but it is working. What I beleive must be wrong is that his HDD makes a weird noise while trying to load ubuntu, which means he might need a new HDD. Could that be true?

Read the article

On checking kernel parms HP-UX & Oracle 10.2

- by [email protected]

Hi,Just did this little script for a customer wanting to investigate if the kernel parameters of their HP-UX machines fits or not the Oracle 10.2 specifications ( looks like someone checked the "User Verified" at database installation time on some prerequisites)Just want to share ( its in Spanish)Hope it helps!--L Normal 0 21 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} ### ### check_kernel_parms.sh ### ### ### ### NAME ### check_kernel_parms.sh ### ### DESCRIPTION ### Comprueba los parametros de kernel ### ### NOTES ### Valido para versiones de SO HP-UX y Oracle 10.2 ### ### ### MODIFIED (MM/DD/YY) ### lvelasco 05/20/10 - Creacion V_DATE=`/usr/bin/date +%Y%m%d_%H%M%S` if [ "${1}" != 'sin_traza' ]; then V_FICHERO_LOG=`dirname $0`/`basename $0`.${V_DATE}.log exec 4>&1 tee ${V_FICHERO_LOG} >&4 |& exec 1>&p 2>&1 fi echo "${V_DATE}- check_params.sh *******************************************" echo "Comenzado ejecucion de chequeo de parametros de kernel en maquina `hostname`" echo "****************************************************************************" UX_VERS=`uname -a | awk '{print $3}'` KCTUNE=/usr/sbin/kctune MEM_TOTAL_MB=`./check_mem` <-- This should return the physical mem of the machine on bytes MEM_TOTAL=$((MEM_TOTAL_MB*1024)) NPROC=$(${KCTUNE} | grep nproc | grep -v '(nproc' | grep -v *nproc | awk '{print $2}') if [ ${NPROC} -lt 4096 ] then echo "[FAILED] Information: El parametro nproc con valor actual ${NPROC} debe tener una valor superior a 4096" else echo "[OK] Information: El parametro nproc con valor actual ${NPROC} debe tener una valor superior a 4096" fi KSI_ALLOC_MAX_T=$(${KCTUNE} | grep ksi_alloc | awk '{print $2}') KSI_ALLOC_MAX=$((NPROC*8)) if [ ${KSI_ALLOC_MAX_T} -lt ${KSI_ALLOC_MAX} ] then echo "[FAILED] Information: El parametro ksi_alloc_max con valor actual ${KSI_ALLOC_MAX_T} debe tener una valor superior a ${KSI_ALLOC_MAX}" else echo "[OK] Information: El parametro ksi_alloc_max con valor actual ${KSI_ALLOC_MAX_T} debe tener una valor superior a ${KSI_ALLOC_MAX}" fi EXECUTABLE_STACK=$(${KCTUNE} | grep executable_stack | awk '{print $2}') if [ ${EXECUTABLE_STACK} -ne 0 ] then echo "[FAILED] Information: El parametro executable_stack con valor actual ${EXECUTABLE_STACK} debe tener una valor igual a 0" else echo "[OK] Information: El parametro executable_stack con valor actual ${EXECUTABLE_STACK} debe tener una valor igual a 0" fi MAX_THREAD_PROC=$(${KCTUNE} | grep max_thread_proc | awk '{print $2}') if [ ${MAX_THREAD_PROC} -lt 1024 ] then echo "[FAILED] Information: El parametro max_thread_proc con valor actual ${MAX_THREAD_PROC} debe tener una valor superior a 1024" else echo "[OK] Information: El parametro max_thread_proc con valor actual ${MAX_THREAD_PROC} debe tener una valor superior a 1024" fi MAXDSIZ=$(${KCTUNE} | grep 'maxdsiz ' | awk '{print $2}') if [ ${MAXDSIZ} -lt 1073741824 ] then echo "[FAILED] Information: El parametro maxdsiz con valor actual ${MAXDSIZ} debe tener una valor superior a 1073741824" else echo "[OK] Information: El parametro maxdsiz con valor actual ${MAXDSIZ} debe tener una valor superior a 1073741824" fi MAXDSIZ_64BIT=$(${KCTUNE} | grep maxdsiz_64bit | awk '{print $2}') if [ ${MAXDSIZ} -lt 2147483648 ] then echo "[FAILED] Information: El parametro maxdsiz_64bit con valor actual ${MAXDSIZ_64BIT} debe tener una valor superior a 2147483648" else echo "[OK] Information: El parametro maxdsiz_64bit con valor actual ${MAXDSIZ_64BIT} debe tener una valor superior a 2147483648" fi MAXSSIZ=$(${KCTUNE} | grep 'maxssiz ' | awk '{print $2}') if [ ${MAXSSIZ} -lt 134217728 ] then echo "[FAILED] Information: El parametro maxssiz con valor actual ${MAXSSIZ} debe tener una valor superior a 134217728" else echo "[OK] Information: El parametro maxssiz con valor actual ${MAXSSIZ} debe tener una valor superior a 134217728" fi MAXSSIZ_64BIT=$(${KCTUNE} | grep maxssiz_64bit | awk '{print $2}') if [ ${MAXSSIZ} -lt 1073741824 ] then echo "[FAILED] Information: El parametro maxssiz_64bit con valor actual ${MAXSSIZ} debe tener una valor superior a 1073741824" else echo "[OK] Information: El parametro maxssiz_64bit con valor actual ${MAXSSIZ} debe tener una valor superior a 1073741824" fi MAXUPRC_T=$(${KCTUNE} | grep maxuprc | awk '{print $2}') MAXUPRC=$(((NPROC*9)/10)) if [ ${MAXUPRC_T} -lt ${MAXUPRC} ] then echo "[FAILED] Information: El parametro maxuprc con valor actual ${MAXUPRC_T} debe tener una valor superior a ${MAXUPRC}" else echo "[OK] Information: El parametro maxuprc con valor actual ${MAXUPRC_T} debe tener una valor superior a ${MAXUPRC}" fi MSGMNI=$(${KCTUNE} | grep msgmni | awk '{print $2}') if [ ${MSGMNI} -lt ${NPROC} ] then echo "[FAILED] Information: El parametro msgni con valor actual ${MSGMNI} debe tener una valor superior a ${NPROC}" else echo "[OK] Information: El parametro msgni con valor actual ${MSGMNI} debe tener una valor superior a ${NPROC}" fi if [ ${UX_VERS} = "B.11.23" ] then MSGSEG=$(${KCTUNE} | grep msgseg | awk '{print $2}') if [ ${MSGSEG} -lt 32767 ] then echo "[FAILED] Information: El parametro msgseg con valor actual ${MSGSEG} debe tener una valor superior a 32767" else echo "[OK] Information: El parametro msgseg con valor actual ${MSGSEG} debe tener una valor superior a 32767" fi fi MSGTQL=$(${KCTUNE} | grep msgtql | awk '{print $2}') if [ ${MSGTQL} -lt ${NPROC} ] then echo "[FAILED] Information: El parametro msgtql con valor actual ${MSGTQL} debe tener una valor superior a ${NPROC}" else echo "[OK] Information: El parametro msgtql con valor actual ${MSGTQL} debe tener una valor superior a ${NPROC}" fi if [ ${UX_VERS} = "B.11.23" ] then NFILE_T=$(${KCTUNE} | grep nfile | awk '{print $2}') NFILE=$((15*NPROC+2048)) if [ ${NFILE_T} -lt ${NFILE} ] then echo "[FAILED] Information: El parametro nfile con valor actual ${NFILE_T} debe tener una valor superior a ${NFILE}" else echo "[OK] Information: El parametro nfile con valor actual ${NFILE_T} debe tener una valor superior a ${NFILE}" fi fi NFLOCKS=$(${KCTUNE} | grep nflocks | awk '{print $2}') if [ ${NFLOCKS} -lt ${NPROC} ] then echo "[FAILED] Information: El parametro nflocks con valor actual ${NFLOCKS} debe tener una valor superior a ${NPROC}" else echo "[OK] Information: El parametro nflocks con valor actual ${NFLOCKS} debe tener una valor superior a ${NPROC}" fi NINODE_T=$(${KCTUNE} | grep ninode | grep -v vx | awk '{print $2}') NINODE=$((8*NPROC+2048)) if [ ${NINODE_T} -lt ${NINODE} ] then echo "[FAILED] Information: El parametro ninode con valor actual ${NINODE_T} debe tener una valor superior a ${NINODE}" else echo "[OK] Information: El parametro ninode con valor actual ${NINODE_T} debe tener una valor superior a ${NINODE}" fi NCSIZE_T=$(${KCTUNE} | grep ncsize | awk '{print $2}') NCSIZE=$((NINODE+1024)) if [ ${NCSIZE_T} -lt ${NCSIZE} ] then echo "[FAILED] Information: El parametro ncsize con valor actual ${NCSIZE_T} debe tener una valor superior a ${NCSIZE}" else echo "[OK] Information: El parametro ncsize con valor actual ${NCSIZE_T} debe tener una valor superior a ${NCSIZE}" fi if [ ${UX_VERS} = "B.11.23" ] then MSGMAP_T=$(${KCTUNE} | grep msgmap | awk '{print $2}') MSGMAP=$((MSGTQL+2)) if [ ${MSGMAP_T} -lt ${MSGMAP} ] then echo "[FAILED] Information: El parametro msgmap con valor actual ${MSGMAP_T} debe tener una valor superior a ${MSGMAP}" else echo "[OK] Information: El parametro msgmap con valor actual ${MSGMAP_T} debe tener una valor superior a ${MSGMAP}" fi fi NKTHREAD_T=$(${KCTUNE} | grep nkthread | awk '{print $2}') NKTHREAD=$((((NPROC*7)/4)+16)) if [ ${NKTHREAD_T} -lt ${NKTHREAD} ] then echo "[FAILED] Information: El parametro nkthread con valor actual ${NKTHREAD_T} debe tener una valor superior a ${NKTHREAD}" else echo "[OK] Information: El parametro nkthread con valor actual ${NKTHREAD_T} debe tener una valor superior a ${NKTHREAD}" fi SEMMNI=$(${KCTUNE} | grep semmni | grep -v '(semm' | awk '{print $2}') if [ ${SEMMNI} -lt ${NPROC} ] then echo "[FAILED] Information: El parametro semmni con valor actual ${SEMMNI} debe tener una valor superior a ${NPROC}" else echo "[OK] Information: El parametro semmni con valor actual ${SEMMNI} debe tener una valor superior a ${NPROC}" fi SEMMNS_T=$(${KCTUNE} | grep semmns | awk '{print $2}') SEMMNS=$((SEMMNI+2)) if [ ${SEMMNS_T} -lt ${SEMMNI} ] then echo "[FAILED] Information: El parametro semmns con valor actual ${SEMMNS_T} debe tener una valor superior a ${SEMMNS}" else echo "[OK] Information: El parametro semmns con valor actual ${SEMMNS_T} debe tener una valor superior a ${SEMMNS}" fi SEMMNU_T=$(${KCTUNE} | grep semmnu | awk '{print $2}') SEMMNU=$((NPROC-4)) if [ ${SEMMNU_T} -lt ${SEMMNU} ] then echo "[FAILED] Information: El parametro semmnu con valor actual ${SEMMNU_T} debe tener una valor superior a ${SEMMNU}" else echo "[OK] Information: El parametro semmnu con valor actual ${SEMMNU_T} debe tener una valor superior a ${SEMMNU}" fi if [ ${UX_VERS} = "B.11.23" ] then SEMVMX=$(${KCTUNE} | grep msgseg | awk '{print $2}') if [ ${SEMVMX} -lt 32767 ] then echo "[FAILED] Information: El parametro semvmx con valor actual ${SEMVMX} debe tener una valor superior a 32767" else echo "[OK] Information: El parametro semvmx con valor actual ${SEMVMX} debe tener una valor superior a 32767" fi fi SHMMNI=$(${KCTUNE} | grep shmmni | awk '{print $2}') if [ ${SHMMNI} -lt 512 ] then echo "[FAILED] Information: El parametro shmmni con valor actual ${SHMMNI} debe tener una valor superior a 512" else echo "[OK] Information: El parametro shmmni con valor actual ${SHMMNI} debe tener una valor superior a 512" fi SHMSEG=$(${KCTUNE} | grep shmseg | awk '{print $2}') if [ ${SHMSEG} -lt 120 ] then echo "[FAILED] Information: El parametro shmseg con valor actual ${SHMSEG} debe tener una valor superior a 120" else echo "[OK] Information: El parametro shmseg con valor actual ${SHMSEG} debe tener una valor superior a 120" fi VPS_CEILING=$(${KCTUNE} | grep vps_ceiling | awk '{print $2}') if [ ${VPS_CEILING} -lt 64 ] then echo "[FAILED] Information: El parametro vps_ceiling con valor actual ${VPS_CEILING} debe tener una valor superior a 64" else echo "[OK] Information: El parametro vps_ceiling con valor actual ${VPS_CEILING} debe tener una valor superior a 64" fi SHMMAX=$(${KCTUNE} | grep shmmax | awk '{print $2}') if [ ${SHMMAX} -lt ${MEM_TOTAL} ] then echo "[FAILED] Information: El parametro shmmax con valor actual ${SHMMAX} debe tener una valor superior a ${MEM_TOTAL}" else echo "[OK] Information: El parametro shmmax con valor actual ${SHMMAX} debe tener una valor superior a ${MEM_TOTAL}" fi exit 0

Read the article

Linux kernel 3.5.0-18 update is not working with NVIDIA driver 304.60

- by Janos Fejos

I have Ubuntu 12.10 64 bit and a Nvidia card GT430 and installed 304.60 Linux driver manually and it worked beautifully until the latest Ubuntu update which got modified to 3.5.0-18 Kernel. Everything has gone: launcher, windows I can't move them it got USELESS. I tried to run the previous kermel 3.5.0-17 with which the driver was working well. I gto the same desktop. USeless - So the problem is something else I guess but it has to do with the update that's for sure- Any idea what to do? Now I have to switch back to Windows 7 which I don't want in order to able to work until an update will come up.

Read the article

Kernel Panic: Not booting after upgrade from 10.04 to 12.04

- by Jitesh

I upgraded from 10.04 to 12.04LTS. Upgrade went fine, even restarted couple of times. Then the next day while booting into Ubuntu, after the grub, it gave the error Kernel panic : not syncing vfs unable to mount root fs on unknown block (0,0). I then booted into live CD and tried the following commands, based on other posts on this forum: sudo fdisk -l As the 8 was on /dev/sda1, sudo mount /dev/sda1 /mnt sudo mount --bind /dev /mnt/dev Now I got the message: mount: mount point /mnt/dev does not exist Then tried sudo mount --bind /proc /mnt/proc Again got the message: mount point point /mnt/proc does not exist. then tried sudo chroot /mnt Got message: chroot: failed to run comman '/bin/bash': No such file or directory Now have no clue what to do next. Unable to boot into Ubuntu. Please help. Jitesh

Read the article

VMWare Kernel Modules will not compile or update on Ubuntu 12.04

- by IsaacS

Kernel Module Update was required when opening VMWare client (vmplayer) then following error occurs. Any idea would be appreciated. Unable to start services. See log file /tmp/vmware-root/setup-NNN.log for details (Note: NNN looks like random numbers) On GUI that show progress of updating, "Virtual Netowork Device" show red flag appears. Content of .log file is here: http://pastebin.com/wEKT5UHf This page suggests installing linux-headers-generic and build-essential, which are already installed on mine (thus no good). This could be 1st execution of vmplayer on my machine since I upgraded to Ubuntu 12.04 from 11.10. Environment: VMware Player 4.0.3 build-703057

Read the article

Can't install fglrx on Kernel 3.11.0-12

- by byf-ferdy

I'm running Ubuntu Gnome 13.10 on a Sony Vaio laptop. I tried to install the newest fglrx driver from the cchtml.com guide but no matter which version I use (13.4 or even 13.9) the installation of the generated .debs fails with this message: Error! Bad return status for module build on kernel: 3.11.0-12-generic (x86_64) This seems to be a confirmed bug on launchpad. Currently I'm running the Radeon SI driver but I really need some 3D acceleration. What is there I can do to install any version of fglrx correctly or to speed up the bug-fixing-process? How long does the fixing of these bugs usually take?

Read the article

New to Ubuntu - 12.04.1 Kernel Panic on Installation

- by user88432

I'm a complete Ubuntu and even Linux newbie. I'm learning here, so I'm grateful for any info to help me learn more about this. I have a Dell Dimension 2400 with a Pentium 4 and 1GB of RAM. It's older but it's only going to be doing some small stuff for me when I get it up and going. I've tried installing several versions of Linux (but I really, really want Ubuntu) and I keep getting a similar kernel panic message. The problem is I don't have a clue what that means or how to begin fixing it. I would appreciate any help to get my machine up and going. I have already tried Installing alternate Ubuntu versions Burning multiple 12.04.1 disks Installing other versions of Linux I have a picture of the screen to share; however, I can't post due to the fact that I don't have enough reputation points on this forum because I'm a newbie. I would be happy to email you a pic, if you think you can help.

Read the article

Unable to boot either Ubuntu or Windows after kernel panic

- by Josh Taylor

Hi, Today I have been unable to boot into my Ubuntu (10.10) or Windows (7) partition. Ubuntu kernel panics on boot with the error: init: hash.c:296: Assertion failed in nih_hash_search: hash != NULL I can boot into a LiveUSB environment, and from there can access all my files on my 3 partitions (1 ext4, 2 NTFS). I have also ran fsck on the ext4 partition and ntfsfix on the 2 NTFS partitions, both not finding any errors at all. And Grub is intact and have also tried a reinstall of it. So at the moment I'm currently stuck using a LiveUSB, and would like to see if there are any other options other than reinstalling. Thanks. Update I've now ran chkdsk using my Windows recovery disk, and it found errors and fixed them, but I am still unable to boot into either Windows or Ubuntu Update #2 I've decided to just re-install Ubuntu and start again as I didn't really want to spend any more time looking around whilst I need this computer for work. Thanks for all your help though.

Read the article

building kernel headers (v3.4) breaks wifi (in Ubuntu 12.04.1 LTS)

- by iphonedev7

I have dual-booted by Samsung Series 5 Chromebook into Ubuntu using Jay Lee's script/instructions, and then installed the ~500 updates that appear thereafter. Now, I am trying to build my kernel headers in an attempt to enable virtualization so that I can run VirtualBox (I have a VM image on a flashdrive). I followed the instructions here: https://groups.google.com/forum/?fromgroups=#!topic/chromebook-central/PPQFpC7mYzk mainly doing as olofj suggests in his answer, while also making sure to abide by additions/edits made by panZ and algp. However, now that I have done so, my wifi has stopped working, and when I click on the network icon in the top bar, in place of wifi networks there is a grayed-out message that says "no network devices available". I have an Atheros AR9300 Ethernet card (I think thats what you call it). Any help is much needed and appreciated. Any further details necessary to answer the question will be provided as necessary. Thanks!

Read the article

10.10 - Error compiling kernel in iw_ndis.c

- by chris

I just wanted to compile a kernel (as described here), but I got this error: ubuntu/ndiswrapper/iw_ndis.c:1966: error: unknown field ‘num_private’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1966: warning: initialization makes pointer from integer without a cast ubuntu/ndiswrapper/iw_ndis.c:1967: error: unknown field ‘num_private_args’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1967: warning: excess elements in struct initializer ubuntu/ndiswrapper/iw_ndis.c:1967: warning: (near initialization for ‘ndis_handler_def’) ubuntu/ndiswrapper/iw_ndis.c:1970: error: unknown field ‘private’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1970: warning: initialization makes integer from pointer without a cast ubuntu/ndiswrapper/iw_ndis.c:1970: error: initializer element is not computable at load time ubuntu/ndiswrapper/iw_ndis.c:1970: error: (near initialization for ‘ndis_handler_def.num_standard’) ubuntu/ndiswrapper/iw_ndis.c:1971: error: unknown field ‘private_args’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1971: warning: initialization from incompatible pointer type Can anyone tell me what it means? Googling just came up with a result here on this site, where there was no answer, so maybe now someone knows.

Read the article

error: you need to load kernel first

- by Angelos318

I made a clean install on my Sony Vaio laptop, of Ubuntu 11.10 and when the installation was ready, it prompted to remove the usb I was installing the distro from, and press enter to reboot. After this reboot the first thing I got was the following error: error: couldn't read file error: you need to load the kernel first Press any key to continue.. After that it throws me back to the Grub select screen: Ubuntu, with linux 3.0.0-14-generic-pae recovery mode previous linux versions (none since I made a clean install) memory test If i choose the first option it shows only a black screen and never loads anything. If i reboot the same thing happens. Could I repair this using boot-repair? Is there any other way? Note: I know nothing about linux code so i am a total noob on this one Update: boot-repair did not help Grub.cfg here: http://pastebin.com/GKLuDuhM Boot Info Script: http://pastebin.com/indARkKJ

Read the article

Beginner help with compiling a driver into the kernel so my ethernet works

- by MattC

I have a Acer Aspire Revo nettop and it seems like it's a common error that Ubuntu doesn't have a driver for the ethernet. Someone recommend following the steps on this page. http://manpages.ubuntu.com/manpages/jaunty/man4/nfe.4freebsd.html The only problem is that I have no clue what to do really. I'm almost like an absolute beginner with linux and was hoping to play with it by doing some apache+php+mysql stuff, however I cannot at the moment. Where is the kernel configuration file? and where is the loader.conf file?

Read the article

Kernel panic when booting from USB

- by maaartinus

I downloaded ubuntu-11.04-desktop-amd64.iso and used Universal-USB-Installer-1.8.6.3.exe to format my USB stick und put the ISO on it. When I tried to install from it, I've got a kernel panic just like here, except for the version number (mine was 2.6.38-8-generic #42-ubuntu). My ISO image seems to work, as I installed it into a VMWare player without problems. Booting Linux from USB works surely too, as I did it some time ago with an older Ubuntu version. I can imagine things to try out, e.g., write the image again, try another version, pray, look for patches, etc. However, I'm looking for a time-efficient solution, something what most probably works. An advice of the sort "wait two weeks until it's surely fixed, then download again" is acceptable, I'm determined to switch to Linux, but it can wait a bit.

Read the article

Fresh install of 12.04 Kernel panic

- by user70260

I am attempting to install Ubuntu 12.04 on my computer. After the Ubuntu splash screen, the computer throws up this error: sr 2:0:1:0: [sr0] Unhandled error code Kernel panic - not syncing: Attempted to kill init! PID: 1, comm: run-init Not Tainted 3.2.0-23-generic #36-Ubuntu The computer hardware is as follows: Core 2 quad 9400, 8gb RAM, GTX 275, 3 Mech HD, 2 SSD, Win 7 install. I would like to dual boot Ubuntu on this computer if possible. I did try placing this disk in my laptop and booted successfully which leads me to believe the fault lies with the desktop. Under windows all hardware seems to work ok. Any ideas?

Read the article

Kernel Panic while Installing Ubuntu 12.10 from USB Drive

- by user100889

Good evening, I recently looked into installing Ubuntu alongside my Windows. I was able to mount the iso on a USB drive using Universal USB Installer. I verified it with the MD5sum utility and the hash is correct. When installing, I can get to the screen where I choose the boot order, select the USB drive, and then I get to a screen where Ubuntu seems to be 'loading' (purple background with Ubuntu logo and name in the middle). Then, all of a sudden, I get a "Kernel Panic - Not syncing: fatal exception in interrupt" error message. My specs : Intel Core 2 Duo CPU T5850 @ 2.16 GHz / 4 GB of ram / Packard Bell computer from 2007. / Windows 7 Ultimate x64 installed. What should I do now ? Thanks for your help.

Read the article

kernel panic - diagnosis?

- by user94188

I'm having a kernel panic problem - my machine will run for hours, maybe all day and then have a panic attack. I have no idea how to interpret the output, but here's a picture of what's left on the screen when it happens: https://dl.dropbox.com/u/13279067/photo.JPG (I can't post images yet) I've looked through the logs but didn't find anything obvious - I'm still learning though so I've probably missed something. It's a little harder since it's always happened when I've been out or at night so I can't pinpoint the exact time it crashed. Anyone have advice? thanks

Search Results

Search found 4450 results on 178 pages for 'bashar kernel'.

Page 8/178 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15 | Next Page >

- by Dean Thomson

- by Sascha Klocke

- by dago

- by Jorge Pinho

- by Primož Kralj

- by NoBugs

- by jy19

- by Tarek

- by yoavstr

- by Thanos

- by [email protected]

- by Janos Fejos

- by Jitesh

- by IsaacS

- by byf-ferdy

- by user88432

- by Josh Taylor

- by iphonedev7

- by chris

- by Angelos318

- by MattC

- by maaartinus

- by user70260

- by user100889

- by user94188

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15 | Next Page >