Search Results

Search found 571 results on 23 pages for 'christopher roy'.

Page 8/23 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • Multiple cable adapter setup not working - VGA to smartphone. All cables tested and work

    - by Christopher Rucinski
    Issue Pictured overhead projector setup does not work. #1 - #2 - #3 - Phone. All cables are tested and work! The issue is the HDMI connection between cable #2 and #3. With all other cables, the screen will automatically be displayed onto the projector screen. No extra work needed. With the pictured setup, the smartphone screen is not displayed onto the projector screen. What is the issue with the HDMI connection?? Background We recently had to do presentations at work (school), but the administration only provided VGA means of hooking up to it. Mostly likely reason probably dealt with cost. Anyways, there are several teachers that have brand new Samsung Series 9 ultrabooks (or similar). You know, the ones without VGA support. So I bought an adapter for those ultrabooks. Cable #5 in the picture below. However, both my coworker and I have been wanting to just display our phone screens on the projector. This I knew would require some extra work. What I have VGA cable to projector (cables go through the wall) For laptops HDMI to VGA cable For laptops MHL adapter For 11-pin microUSB phones microHDMI to VGA cable For ultrabooks 11-pin to 5-pin microUSB adapter For older 5-pin microUSB phones) Equipment Projectors 1 projector with VGA and HDMI input (issue is coworkers forget to switch sources) 1 projector with VGA only input Laptops 2 new Samsung ultrabooks w/o VGA or HDMI support 1 ultrabook with VGA and HDMI support several other laptops with at least VGA support 1 tablet with 11-pin microUSB at least 1 new phone with 11-pin microUSB at least 1 old phone with 5-pin microUSB Tested VGA cable (#1) to laptop Good VGA cable (#1) to HDMI adapter (#2) to laptop Good VGA cable (#1) to microHDMI adapter (#5) to laptop Good Projector to HDMI cable (not shown) to MHL adapter (#3) to Galaxy Note 3 smartphone Good VGA cable (#1) to HDMI adapter (#2) to MHL adapter (#3) to Galaxy Note 3 smartphone Does not work!! Extra Notes The 11-pin MHL adapter will not fit inside the 11-pin to 5-pin microUSB adapter so older phones can be displayed on the screen.

    Read the article

  • Having trouble with some media while using Firefox in Ubuntu.

    - by Christopher Chipps
    I just started using Firefox in Ubuntu today. While on Twitter, I noticed some avatars not showing up, but just their description as seen in the screen shot below. Any idea what could cause this? Also, I need to d/l Adobe Flash so I can get other media to work online. It gives me the option to d/l it but then takes me to the Flash file with no option to install. Any ideas with this as well? Thanks for looking into this!

    Read the article

  • Shut Down took way too long because of "Background Programs"

    - by Christopher Chipps
    I tried shutting my desktop PC (with Windows7) down but after several attempts (like 4 or 5) at Start -- Shut Down, the GUI was still there and it was not shutting down. I didn't think there were any programs running when I pressed Shut Down, so I went into the taskbar (Ctrl + Alt + Del) to check out the processes. Once I did that, a screen appeared with a message stating that there are "background programs" still running and it gave me an option to "Force Shut Down" which I pressed and it shut down normally. Does anyone know why this would happen?

    Read the article

  • Can I use a Mac Mini as a web server and database server? What are the pros and cons?

    - by Christopher Altman
    We are a bootstrapped web start up. We have a LAMP web application that we expect relatively low to mid traffic because users need an account to log in. Our current approach is to colocate two servers, a web and mysql database server. We are planning to use Ubuntu Server 9.04. We have shopped around for dedicated servers but the price range from $900 to $1500 per month, therefore we are exploring the colocation approach. We are considering purchasing two Mac Minis (2.0GHz Intel Core 2 Duo 2 Gb RAM) because we are familiar with the machines are the prices are relatively inexpensive. What are the pros and cons of using these 'non-server' grade machines? We would install Ubuntu Sever and attach firewire external hard drives. Any advice on how to set up 'good-and-economic' web/database servers is welcomed.

    Read the article

  • BCM 2007 not opening contacts...

    - by Christopher
    Business Contact Manager for Outlook (2007) is refusing to open contacts. This problem appeared this morning on every machine (Windows XP SP3) on our network. The contact list does populate as normal, and contacts can be printed from the context menu, but the form that displays the contact information does not display, and no error message is thrown. I have turned on logging for BCM in the help menu, but nothing is being generated (or, leastways, I cannot find it anywhere). The SQL services appear to have started as normal. Anyone come across this before I take a deep breath and go with my boss' suggestion of "just reboot the server"? Any other information you need? Thanks.

    Read the article

  • VirtualBox (Windows XP guest on Ubuntu host) through X11?

    - by Roy Rico
    I'd like to host a VirtualBox instance on my Ubuntu machine, using Windows XP as my Guest machine. I'd like to know if I can use an X11 ZZZZZZZZ (Xming/Putty/SSH -X) to run VirtualBox on my Windows 7 machine remotely. Also, if it is possible, could I disconnect from it (while it's still running) and reconnect to it from a different machine?

    Read the article

  • Linux: Schedule command to run once after reboot (RunOnce equivalent)

    - by Christopher Parker
    I'd like to schedule a command to run after reboot on a Linux box. I know how to do this so the command consistently runs after every reboot with a @reboot crontab entry, however I only want the command to run once. After it runs, it should be removed from the queue of commands to run. I'm essentially looking for a Linux equivalent to RunOnce in the Windows world. In case it matters: $ uname -a Linux devbox 2.6.27.19-5-default #1 SMP 2009-02-28 04:40:21 +0100 x86_64 x86_64 x86_64 GNU/Linux $ bash --version GNU bash, version 3.2.48(1)-release (x86_64-suse-linux-gnu) Copyright (C) 2007 Free Software Foundation, Inc. $ cat /etc/SuSE-release SUSE Linux Enterprise Server 11 (x86_64) VERSION = 11 PATCHLEVEL = 0 Is there an easy, scriptable way to do this?

    Read the article

  • Running DNS locally for home network

    - by Roy Rico
    I have a small home network that just got larger ( New roommate, My existing roommate got a laptop (on top of her computer)j, my friends coming over with laptop, etc ). I'd like to run a local DNS server for lookups of my local network stuff (fileserver.local, windowsTV.local, machineA.local, machineB.local, appletv.local). I used to have a business line with a static IP, and run bind/named internally. However, now, I have a normal account. My ISP's DNS servers are constantly changing (for whatever reasons my ISP doesn't like to keep the same IP range for long). I need my local DNS to be automatically updated to use my ISP's DNS for external traffic, but be able to maintain an internal DNS server (getting to update the hosts file is being a hassle with every new machine on top of rebuilding existing machines with win7 or Ubuntu 9.04). Additionally, My ISP's DNS servers often crash or become unresponsive. Are there any open DNS servers that are reliable (i don't want to reconfig every day) that I could use as my primary, then if those fail, then use my ISP's? UPDATE: Also looking for each workstation to be able to use dhcp to connect, but instead of getting ISP dns servers, getting my internal one.... Thanks

    Read the article

  • VirtualBox (windows XP guest on Ubuntu host) thru X11?

    - by Roy Rico
    Hi, I'd like to host a VirtualBox instance on my ubuntu machine, using WindowsXP as my Guest machine. I'd like to know if i can use an X11 ( Xming/Putty/SSH -X) to run VirtualBox on my Windows 7 machine remotely. Also, if it is possible, could i disconnect from it (while it's still running) and reconnect to it from a different machine?

    Read the article

  • Using Sigmatel STAC 92XX on Windows 7 RTM x64, cannot get 5.1 surround sound to work

    - by Roy Rico
    I have a Dell XPS 420. I've installed Windows 7 RTM (x64) I have this audio device: SIGMATEL STAC 92XX C-Major HD Audio I have tried using the windows 7 basic driver, and also the Vista 64-bit driver from Dell's website (details): Date: 10/29/2007 Version: 6.10.0.5511, A04 File Size: 7 MB With both drivers, I get normal stereo sound from the driver, but my 5.1 surround sound doesn't work. Has anyone experienced this? Is there a fix?

    Read the article

  • Separating user resources - Windows Server 2008 (Terminal Server)

    - by Christopher Wilson
    At the moment I am running a Windows Terminal Server 2008 for around 10 clients that use the server to run programs and access data. Is there anyway to separate the resources of each user so that they do not impact each other in terms of resources. User 1: Opens program User 2: Notices slow down I have looked into using Windows System Resource Manager but do not know if it provides what I need and if there are any other 3rd party tools that also provide this functionality. Any answer is appreciated. Server Specs: HP ProLiant ML110 G7 Processor: Intel® Xeon® E3-1220 (4 core, 3.1 GHz, 8MB, 80W, 1333/t) RAM: 12GB DDR3 ECC 1TB HDD

    Read the article

  • Starting/Stopping IBM WebSphere Application Server (WAS) 7 from the Command Line

    - by Christopher Parker
    I've written a script to automate the process of starting, stopping, and restarting WAS7 from the command line. Nothing starts automatically on one of our staging servers, so I have to start everything: deployment manager, node agent, app server, and Web server. The script I wrote seems to work pretty well. A coworker of mine recommended that I structure my commands differently. I'm wondering if there's a good, valid reason for doing so. First, my variables: WAS_HOME="/opt/IBM/WebSphere/AppServer" WAS_PROFILE_NAME="AppSrv01" WAS_APP_SERVER="server1" WAS_WEB_SERVER="webserver1" How I had the start commands: "${WAS_HOME}/bin/startManager.sh" "${WAS_HOME}/bin/startNode.sh" -profileName $WAS_PROFILE_NAME "${WAS_HOME}/bin/startServer.sh" -profileName $WAS_PROFILE_NAME $WAS_APP_SERVER "${WAS_HOME}/bin/startServer.sh" -profileName $WAS_PROFILE_NAME $WAS_WEB_SERVER I was told that I should do it like this, instead: WAS_DMGR="Dmgr01" # Added variable "${WAS_HOME}/profiles/${WAS_PROFILE_NAME}/bin/startNode.sh" "${WAS_HOME}/profiles/${WAS_DMGR}/bin/startManager.sh" "${WAS_HOME}/profiles/${WAS_PROFILE_NAME}/bin/startServer.sh" $WAS_APP_SERVER "${WAS_HOME}/profiles/${WAS_PROFILE_NAME}/bin/startServer.sh" $WAS_WEB_SERVER How is the second way of starting up everything for WebSphere any better or more correct than the first, original, way?

    Read the article

  • problems mounting an external IDE drive via USB in ubuntu

    - by Roy Rico
    I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

    Read the article

  • Bad sectors, S.M.A.R.T., SpinRite, firmware on platter and drive id questions.

    - by Christopher Galpin
    Is it possible for S.M.A.R.T. to give false readings (say I was fiddling with lots of recovery programs, transfers, so on and so forth) or is it absolutely a read-only direct correlation to the physical status of a drive? Does SpinRite level 5 "recover bad sectors" operate on those marked at the factory? Are they on the same level as your generic bad sector, with SpinRite thus having full access? (Also I'm curious if SMART's bad sector count is zero'd afterward or if it includes factory marked sectors.) The main firmware of some drives, like a WD Passport is stored on the platter. How is it protected? Is it through marking them as bad sectors? If so, I'm wondering if SpinRite's sector recovery could bring about firmware corruption on these drives. Is the failure of a drive to report valid identity information (hdparm -I /dev/xx) consistent with corrupted firmware, or just general disk failure? I may be misunderstanding the role of firmware here. I feel I've read a drive's identity information is on the platter, just like the partition tables and so on. Is this true? (Apologizes if this is more appropriate for SuperUser.)

    Read the article

  • Solution to route/proxy SNMP Traps (or Netflow, generic UDP, etc) for network monitoring?

    - by Christopher Cashell
    I'm implementing a network monitoring solution for a very large network (approximately 5000 network devices). We'd like to have all devices on our network send SNMP traps to a single box (technically this will probably be an HA pair of boxes) and then have that box pass the SNMP traps on to the real processing boxes. This will allow us to have multiple back-end boxes handling traps, and to distribute load among those back end boxes. One key feature that we need is the ability to forward the traps to a specific box depending on the source address of the trap. Any suggestions for the best way to handle this? Among the things we've considered are: Using snmptrapd to accept the traps, and have it pass them off to a custom written perl handler script to rewrite the trap and send it to the proper processing box Using some sort of load balancing software running on a Linux box to handle this (having some difficulty finding many load balancing programs that will handle UDP) Using a Load Balancing Appliance (F5, etc) Using IPTables on a Linux box to route the SNMP traps with NATing We've currently implemented and are testing the last solution, with a Linux box with IPTables configured to receive the traps, and then depending on the source address of the trap, rewrite it with a destination nat (DNAT) so the packet gets sent to the proper server. For example: # Range: 10.0.0.0/19 Site: abc01 Destination: foo01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.0.0.0/19 -j DNAT --to-destination 10.1.2.3 # Range: 10.0.33.0/21 Site: abc01 Destination: foo01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.0.33.0/21 -j DNAT --to-destination 10.1.2.3 # Range: 10.1.0.0/16 Site: xyz01 Destination: bar01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.1.0.0/16 -j DNAT --to-destination 10.3.2.1 This should work with excellent efficiency for basic trap routing, but it leaves us completely limited to what we can mach and filter on with IPTables, so we're concerned about flexibility for the future. Another feature that we'd really like, but isn't quite a "must have" is the ability to duplicate or mirror the UDP packets. Being able to take one incoming trap and route it to multiple destinations would be very useful. Has anyone tried any of the possible solutions above for SNMP traps (or Netflow, general UDP, etc) load balancing? Or can anyone think of any other alternatives to solve this?

    Read the article

  • What is the keyboard shortcut to clear formatting on Office 2008 Mac?

    - by Laurent Bourgault-Roy
    I recently switched from a PC to a brand new Macbook Pro. I was happy to see that most of the keyboard shortcuts in Word 2008 where the same or almost the same than in Word 2007. However, there is one keyboard shortcut that I dearly miss : the clear formatting shortcut (ctrl + space on Windows). I know the feature exists since it's in the formatting bar, but I can't find the keyboard shorcut. I tried cmd + space but that is the system keyboard shortcut to switch the keyboard type. alt + space delete the text without deleting the formatting. ctrl + space doesn't seem to do anything. Does anyone know what the keyboard shortcut for the clear formatting command may be? I hope there's one because it's really painful to reach for the mouse everytime I put a title and I want to switch to a normal paragraph style...

    Read the article

  • What are the advantages and disadvantages of having a hosted firewall?

    - by Roy
    Would you rather have your firewall hosted or in house if you've got the skills to manage it? We currently have 6 remote offices and 2 different ISP's, one private network and our firewall (Watchguard, licenses are due to expire) is also our main gateway. I don't see how a hosted firewall (in this case Fortinet) is going to work for us especially when it's cheaper to buy our own firewall and the transition from one ISP to a new provider will take some time because our current contracts aren't due to expire soon. What are to pros and cons of having a firewall hosted by your ISP in general?

    Read the article

  • Codec Problems with trying to edit videos with VirtualDub

    - by Roy Rico
    So, I'm a little frustrated. According to this post and various other internet sources, virtualdub is supposed to allow users to quickly split and join video files. I am using windows 7 64 Bit and the latest version of VirtualDub (64-bit). I have tried to edit various movie files, and each attempt at editing various files I have done has not worked for me. AVI file A.avi won't load, saying that it can't located the Decompressor for the "FMP4" format. I have tried this solution and this one, and neither of them work. I have tried setting the VFW Decompressor for 'Other MPEG4' setting to XVID or LIBAVCODEC. There is no change in virtual dub AVI file C.avi will load in Virtual Dub, but any attempt to split it gives me an error that I don't have XVID codecs installed. I've attempted to install the proper codecs (Shark's Windows 7 Codecs, CCCP) with no change. AVI file C.avi will load, and it will split, but won't split using the "Direct Stream Copy" claiming the compression algorithm is incompatible. I tried "Fast Recompress" option and it created a 27GB file out of what was supposed to be about a 300-400MB file. Can someone please give me some insight into what I'm messing up?

    Read the article

  • Virtual PC - Display Issue with Ubuntu Server

    - by Christopher R
    Hi Everyone, I just did a clean install of Ubuntu Server 9.04 in Virtual PC on the Windows 7 RC, and it seems to be having a bit of an issue with the virtual machine's display adapter. I've tried setting a VGA flag in the GRUB configuration to no avail. This is a guess, but I think it has something to do with the color console mode that gets enabled by default at boot time. The system starts booting just fine (i.e. the console looks "normal" when I'm asked to enter an LVM passphrase, etc.), but then the display goes wonky after a few seconds and I end up with this. Typing commands in bash works just fine: it's not like the system is frozen or anything, I just can't see anything that I type. The console looks exactly the way it does in the image below.

    Read the article

  • Unable to access Citrix XenApp 6 published applications externally

    - by Christopher McCann
    We are trying to use a trial of Citrix XenApp 6 Fundamentals to virtualise a couple of applications as a proof of concept. We haven't ever used it before so I confess to be a noob with it. We can connect to the XenApp web interface, and the iPad app will connect and list the applications, but the applications themselves will not load. I discovered in the .ica file that it was attempting to connect to the internal IP address of the server instead of its static external. I have been following various threads on Citrix but nothing seems to have fixed it for me. The server is deployed on an EC2 instance with a static elastic IP. All the ports are opened and I can telnet into the XenApp server on 1493 and I get the ICA response. I have also run on ALTADDR and provided the external IP address. Does anyone have any ideas?

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >