Search Results

Search found 10583 results on 424 pages for 'dev groups'.

Page 8/424 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • DVD wont mount Ubuntu 12.04

    - by CyborgGold
    I can't seem to be able to mount my optical drive. I have tried numerous solutions from this site with no results. I am not able to see the device inside the file browser either. There is a DVD in the drive. I am running 12.04 on an HP g60-235dx portable. I have a link below to the specs. I will also list what I have tried (that I can find back right now.) I know the drive is functioning, because just before Windows 7 crashed and my MBR went fubar I was watching movies just fine. I am fairly new to linux, so don't assume I know anything. Ok, so here is what I have tried: sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list sudo apt-get --quiet update sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring sudo apt-get --quiet update sudo apt-get install libdvdcss2 dmesg | grep sr0 (no output) apt-get install libdvdnav4 (already installed, and up to date) sudo /usr/share/doc/libdvdread4/install-css.sh ls -l /dev/cdrom /dev/cdrw /dev/dvd /dev/dvdrw /dev/scd0 /dev/sr0 ls: cannot access /dev/scd0: No such file or directory lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/cdrom -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/cdrw -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/dvd -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/dvdrw -> sr0 brw-rw----+ 1 root cdrom 11, 0 Sep 10 03:51 /dev/sr0 wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'TSSTcorp' 'CDDVDW TS-L633M' ------------------------------------------------------------------------- sudo lshw optical *-cdrom description: DVD-RAM writer product: CDDVDW TS-L633M vendor: TSSTcorp physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 0200 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc sudo lshw | grep cdrom *-cdrom logical name: /dev/cdrom Spec sheet for portable: http://www.cnet.com/laptops/hp-g60-235dx/4507-3121_7-33496192.html If you need any more information than all of that... please let me know.

    Read the article

  • ?Oracle Database 12c????ASM Scrubbing Disk Groups

    - by Liu Maclean(???)
    ?12.1?Oracle ASM??????????????????? ??Scrubbing Disk Groups, Disk Scrubbing???????????,?????Normal ??High Redundancy?disk group?????? Scrubbing ?????????????????Disk Scrubbing???disk group rebalancing???????I/O?????Disk Scrubbing??????I/O????? ?????????Scrubbing????,?????,????????????,?????ALTER DISKGROUP?????????: SQL> ALTER DISKGROUP data SCRUB POWER LOW; SQL> ALTER DISKGROUP data SCRUB FILE '+DATA/ORCL/ASKMACLEAN/example.266.806582193' REPAIR POWER HIGH FORCE; SQL> ALTER DISKGROUP data SCRUB DISK DATA_0005 REPAIR POWER HIGH FORCE; ?????SCRUB ?: ??REPAIR??????????,?????REPAIR,?SCRUB???????????????? ??POWER?????AUTO LOW HIGH ??MAX? ?POWER???,???AUTO????? ??WAIT ???????scrubbing ?????????WAIT???,?scrubbing??????scrubbing queue ??,??????? ?FORCE?????,?????I/O????????????????scrubbing ,????????

    Read the article

  • Partition is missing in /dev

    - by haimg
    I'm having a strange problem since I moved from Centos5 to Centos6. I have three disks, first two are used as a RAID1, and third one is a stand-alone backup disk that is not listed in /etc/fstab (it is mounded when needed and then unmounted). My problem: After a boot, /dev/sdc exists but /dev/sdc1 does not. Also, the links in /dev/disks are also absent for the first partition of sdc. Disk itself is fine, and if I hot-remove it and plug it back in, /dev/sdc1 appears ok and everything is working. My question: What subsystem manages auto-discovery of disks, partitions, etc. during the boot process (e.g. what creates /dev/disks/by-label)? How do I configure it to scan /dev/sdc too and create all relevant files and links in /dev ? Edit: Here's the relevant part of dmesg output (the only place sdc appears). It does list sdc1, but it's not in /dev! sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdc: sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: DMAR:[DMA Read] Request device [00:1e.0] fault addr 361bc000 DMAR:[fault reason 06] PTE Read access is not set sdb1 sdb2 sdb3 sdc1 sda1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: [sdc] Attached SCSI disk sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk

    Read the article

  • How to include an external jar in gwt client side?

    - by Sergio del Amo
    I would like to use the org.apache.commons.validator.GenericValidator class in a view class of my GWT web app. I have read that I have to implicitely tell that I intend to use this external library. I thought adding the next line into my App.gwt.xml would work. <inherits name='org.apache.commons.validator.GenericValidator'/> I get the next error: Loading inherited module 'org.apache.commons.validator.GenericValidator' [ERROR] Unable to find 'org/apache/commons/validator/GenericValidator.gwt.xml' on your classpath; could be a typo, or maybe you forgot to include a classpath entry for source? [ERROR] Line 13: Unexpected exception while processing element 'inherits' com.google.gwt.core.ext.UnableToCompleteException: (see previous log entries) at com.google.gwt.dev.cfg.ModuleDefLoader.nestedLoad(ModuleDefLoader.java:239) at com.google.gwt.dev.cfg.ModuleDefSchema$BodySchema.__inherits_begin(ModuleDefSchema.java:354) at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.google.gwt.dev.util.xml.HandlerMethod.invokeBegin(HandlerMethod.java:223) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.startElement(ReflectiveParser.java:270) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:501) at com.sun.org.apache.xerces.internal.parsers.AbstractXMLDocumentParser.emptyElement(AbstractXMLDocumentParser.java:179) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:1339) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2747) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205) at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.parse(ReflectiveParser.java:327) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.access$100(ReflectiveParser.java:48) at com.google.gwt.dev.util.xml.ReflectiveParser.parse(ReflectiveParser.java:398) at com.google.gwt.dev.cfg.ModuleDefLoader.nestedLoad(ModuleDefLoader.java:257) at com.google.gwt.dev.cfg.ModuleDefLoader$1.load(ModuleDefLoader.java:169) at com.google.gwt.dev.cfg.ModuleDefLoader.doLoadModule(ModuleDefLoader.java:283) at com.google.gwt.dev.cfg.ModuleDefLoader.loadFromClassPath(ModuleDefLoader.java:141) at com.google.gwt.dev.Compiler.run(Compiler.java:184) at com.google.gwt.dev.Compiler$1.run(Compiler.java:152) at com.google.gwt.dev.CompileTaskRunner.doRun(CompileTaskRunner.java:87) at com.google.gwt.dev.CompileTaskRunner.runWithAppropriateLogger(CompileTaskRunner.java:81) at com.google.gwt.dev.Compiler.main(Compiler.java:159) [ERROR] Failure while parsing XML com.google.gwt.core.ext.UnableToCompleteException: (see previous log entries) at com.google.gwt.dev.util.xml.DefaultSchema.onHandlerException(DefaultSchema.java:56) at com.google.gwt.dev.util.xml.Schema.onHandlerException(Schema.java:66) at com.google.gwt.dev.util.xml.Schema.onHandlerException(Schema.java:66) at com.google.gwt.dev.util.xml.HandlerMethod.invokeBegin(HandlerMethod.java:233) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.startElement(ReflectiveParser.java:270) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:501) at com.sun.org.apache.xerces.internal.parsers.AbstractXMLDocumentParser.emptyElement(AbstractXMLDocumentParser.java:179) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:1339) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2747) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205) at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.parse(ReflectiveParser.java:327) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.access$100(ReflectiveParser.java:48) at com.google.gwt.dev.util.xml.ReflectiveParser.parse(ReflectiveParser.java:398) at com.google.gwt.dev.cfg.ModuleDefLoader.nestedLoad(ModuleDefLoader.java:257) at com.google.gwt.dev.cfg.ModuleDefLoader$1.load(ModuleDefLoader.java:169) at com.google.gwt.dev.cfg.ModuleDefLoader.doLoadModule(ModuleDefLoader.java:283) at com.google.gwt.dev.cfg.ModuleDefLoader.loadFromClassPath(ModuleDefLoader.java:141) at com.google.gwt.dev.Compiler.run(Compiler.java:184) at com.google.gwt.dev.Compiler$1.run(Compiler.java:152) at com.google.gwt.dev.CompileTaskRunner.doRun(CompileTaskRunner.java:87) at com.google.gwt.dev.CompileTaskRunner.runWithAppropriateLogger(CompileTaskRunner.java:81) at com.google.gwt.dev.Compiler.main(Compiler.java:159) [ERROR] Unexpected error while processing XML com.google.gwt.core.ext.UnableToCompleteException: (see previous log entries) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.parse(ReflectiveParser.java:351) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.access$100(ReflectiveParser.java:48) at com.google.gwt.dev.util.xml.ReflectiveParser.parse(ReflectiveParser.java:398) at com.google.gwt.dev.cfg.ModuleDefLoader.nestedLoad(ModuleDefLoader.java:257) at com.google.gwt.dev.cfg.ModuleDefLoader$1.load(ModuleDefLoader.java:169) at com.google.gwt.dev.cfg.ModuleDefLoader.doLoadModule(ModuleDefLoader.java:283) at com.google.gwt.dev.cfg.ModuleDefLoader.loadFromClassPath(ModuleDefLoader.java:141) at com.google.gwt.dev.Compiler.run(Compiler.java:184) at com.google.gwt.dev.Compiler$1.run(Compiler.java:152) at com.google.gwt.dev.CompileTaskRunner.doRun(CompileTaskRunner.java:87) at com.google.gwt.dev.CompileTaskRunner.runWithAppropriateLogger(CompileTaskRunner.java:81) at com.google.gwt.dev.Compiler.main(Compiler.java:159) Anyone knows how it works?

    Read the article

  • How to include an external jar in a GWT module?

    - by Sergio del Amo
    I would like to use the org.apache.commons.validator.GenericValidator class in a view class of my GWT web app. I have read that I have to implicitely tell that I intend to use this external library. I thought adding the next line into my App.gwt.xml would work. <inherits name='org.apache.commons.validator.GenericValidator'/> I get the next error: Loading inherited module 'org.apache.commons.validator.GenericValidator' [ERROR] Unable to find 'org/apache/commons/validator/GenericValidator.gwt.xml' on your classpath; could be a typo, or maybe you forgot to include a classpath entry for source? [ERROR] Line 13: Unexpected exception while processing element 'inherits' com.google.gwt.core.ext.UnableToCompleteException: (see previous log entries) at com.google.gwt.dev.cfg.ModuleDefLoader.nestedLoad(ModuleDefLoader.java:239) at com.google.gwt.dev.cfg.ModuleDefSchema$BodySchema.__inherits_begin(ModuleDefSchema.java:354) at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.google.gwt.dev.util.xml.HandlerMethod.invokeBegin(HandlerMethod.java:223) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.startElement(ReflectiveParser.java:270) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:501) at com.sun.org.apache.xerces.internal.parsers.AbstractXMLDocumentParser.emptyElement(AbstractXMLDocumentParser.java:179) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:1339) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2747) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205) at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.parse(ReflectiveParser.java:327) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.access$100(ReflectiveParser.java:48) at com.google.gwt.dev.util.xml.ReflectiveParser.parse(ReflectiveParser.java:398) at com.google.gwt.dev.cfg.ModuleDefLoader.nestedLoad(ModuleDefLoader.java:257) at com.google.gwt.dev.cfg.ModuleDefLoader$1.load(ModuleDefLoader.java:169) at com.google.gwt.dev.cfg.ModuleDefLoader.doLoadModule(ModuleDefLoader.java:283) at com.google.gwt.dev.cfg.ModuleDefLoader.loadFromClassPath(ModuleDefLoader.java:141) at com.google.gwt.dev.Compiler.run(Compiler.java:184) at com.google.gwt.dev.Compiler$1.run(Compiler.java:152) at com.google.gwt.dev.CompileTaskRunner.doRun(CompileTaskRunner.java:87) at com.google.gwt.dev.CompileTaskRunner.runWithAppropriateLogger(CompileTaskRunner.java:81) at com.google.gwt.dev.Compiler.main(Compiler.java:159) [ERROR] Failure while parsing XML com.google.gwt.core.ext.UnableToCompleteException: (see previous log entries) at com.google.gwt.dev.util.xml.DefaultSchema.onHandlerException(DefaultSchema.java:56) at com.google.gwt.dev.util.xml.Schema.onHandlerException(Schema.java:66) at com.google.gwt.dev.util.xml.Schema.onHandlerException(Schema.java:66) at com.google.gwt.dev.util.xml.HandlerMethod.invokeBegin(HandlerMethod.java:233) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.startElement(ReflectiveParser.java:270) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:501) at com.sun.org.apache.xerces.internal.parsers.AbstractXMLDocumentParser.emptyElement(AbstractXMLDocumentParser.java:179) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:1339) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2747) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205) at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.parse(ReflectiveParser.java:327) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.access$100(ReflectiveParser.java:48) at com.google.gwt.dev.util.xml.ReflectiveParser.parse(ReflectiveParser.java:398) at com.google.gwt.dev.cfg.ModuleDefLoader.nestedLoad(ModuleDefLoader.java:257) at com.google.gwt.dev.cfg.ModuleDefLoader$1.load(ModuleDefLoader.java:169) at com.google.gwt.dev.cfg.ModuleDefLoader.doLoadModule(ModuleDefLoader.java:283) at com.google.gwt.dev.cfg.ModuleDefLoader.loadFromClassPath(ModuleDefLoader.java:141) at com.google.gwt.dev.Compiler.run(Compiler.java:184) at com.google.gwt.dev.Compiler$1.run(Compiler.java:152) at com.google.gwt.dev.CompileTaskRunner.doRun(CompileTaskRunner.java:87) at com.google.gwt.dev.CompileTaskRunner.runWithAppropriateLogger(CompileTaskRunner.java:81) at com.google.gwt.dev.Compiler.main(Compiler.java:159) [ERROR] Unexpected error while processing XML com.google.gwt.core.ext.UnableToCompleteException: (see previous log entries) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.parse(ReflectiveParser.java:351) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.access$100(ReflectiveParser.java:48) at com.google.gwt.dev.util.xml.ReflectiveParser.parse(ReflectiveParser.java:398) at com.google.gwt.dev.cfg.ModuleDefLoader.nestedLoad(ModuleDefLoader.java:257) at com.google.gwt.dev.cfg.ModuleDefLoader$1.load(ModuleDefLoader.java:169) at com.google.gwt.dev.cfg.ModuleDefLoader.doLoadModule(ModuleDefLoader.java:283) at com.google.gwt.dev.cfg.ModuleDefLoader.loadFromClassPath(ModuleDefLoader.java:141) at com.google.gwt.dev.Compiler.run(Compiler.java:184) at com.google.gwt.dev.Compiler$1.run(Compiler.java:152) at com.google.gwt.dev.CompileTaskRunner.doRun(CompileTaskRunner.java:87) at com.google.gwt.dev.CompileTaskRunner.runWithAppropriateLogger(CompileTaskRunner.java:81) at com.google.gwt.dev.Compiler.main(Compiler.java:159) I have commons.validator-1.3.1.jar in war/WEB-INF/lib I am using eclipse with Google Plugin. Anyone knows how it works?

    Read the article

  • How to get notified about changes on SharePoint groups.

    - by Flo
    Hi, I'm actual looking for a way to get notified about any changes on a SharePoint group. First I though I would be able to this by attaching a event handler to some kind of group list. But unfortunately there are no such list representing SharePoint groups. My second attempt was to bind a event handler to the content type SharePointGroup but this didn't work either. So are there any other options to get notified about events on a SharePoint group? Bye, Flo EDIT: Thanks for the reply so far. I forgot to mention that I've already googled and read about the user information list. Sorry. First I found a forum entry where they post the relative URL to the user information list (_catalogs/users/simple.aspx). When I'm using this link to see the list,it only contains users and no groups. I don't know but perhaps this link does some filtering on the list. The other information I found about in several blog and forum posts was that a event handler attached to the user information list are not fired up on an events. I have to admit after reading that it doesn't work so many times and even on MSDN (http://msdn.microsoft.com/en-us/library/aa979520.aspx), I didn't try it on my own. The problem attaching the event handler to the content type wasn't the attaching thing, the handler simply didn't get fired when I for example changed a group name or deleted a user from the group. I don't have an idea why the handler doesn't get called I pretty sure I implemented the right methods and attached them to the right events. Any other suggestions how to get informed about changes on SharePoint groups?

    Read the article

  • fd partitions gone from 2 discs, md happy with it and resyncs. How to recover ?

    - by d0nd
    Hey gurus, need some help badly with this one. I run a server with a 6Tb md raid5 volume built over 7*1Tb disks. I've had to shut down the server lately and when it went back up, 2 out of the 7 disks used for the raid volume had lost its conf : dmesg : [ 10.184167] sda: sda1 sda2 sda3 // System disk [ 10.202072] sdb: sdb1 [ 10.210073] sdc: sdc1 [ 10.222073] sdd: sdd1 [ 10.229330] sde: sde1 [ 10.239449] sdf: sdf1 [ 11.099896] sdg: unknown partition table [ 11.255641] sdh: unknown partition table All 7 disks have same geometry and were configured alike : dmesg : Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect All 7 disks (sdb1, sdc1, sdd1, sde1, sdf1, sdg1, sdh1) were used in a md raid5 xfs volume. When booting, md, which was (obviously) out of sync kicked in and automatically started rebuilding over the 7 disks, including the two "faulty" ones; xfs tried to do some shenanigans as well: dmesg : [ 19.566941] md: md0 stopped. [ 19.817038] md: bind<sdc1> [ 19.817339] md: bind<sdd1> [ 19.817465] md: bind<sde1> [ 19.817739] md: bind<sdf1> [ 19.817917] md: bind<sdh> [ 19.818079] md: bind<sdg> [ 19.818198] md: bind<sdb1> [ 19.818248] md: md0: raid array is not clean -- starting background reconstruction [ 19.825259] raid5: device sdb1 operational as raid disk 0 [ 19.825261] raid5: device sdg operational as raid disk 6 [ 19.825262] raid5: device sdh operational as raid disk 5 [ 19.825264] raid5: device sdf1 operational as raid disk 4 [ 19.825265] raid5: device sde1 operational as raid disk 3 [ 19.825267] raid5: device sdd1 operational as raid disk 2 [ 19.825268] raid5: device sdc1 operational as raid disk 1 [ 19.825665] raid5: allocated 7334kB for md0 [ 19.825667] raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2 [ 19.825669] RAID5 conf printout: [ 19.825670] --- rd:7 wd:7 [ 19.825671] disk 0, o:1, dev:sdb1 [ 19.825672] disk 1, o:1, dev:sdc1 [ 19.825673] disk 2, o:1, dev:sdd1 [ 19.825675] disk 3, o:1, dev:sde1 [ 19.825676] disk 4, o:1, dev:sdf1 [ 19.825677] disk 5, o:1, dev:sdh [ 19.825679] disk 6, o:1, dev:sdg [ 19.899787] PM: Starting manual resume from disk [ 28.663228] Filesystem "md0": Disabling barriers, not supported by the underlying device [ 28.663228] XFS mounting filesystem md0 [ 28.884433] md: resync of RAID array md0 [ 28.884433] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 28.884433] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 28.884433] md: using 128k window, over a total of 976759936 blocks. [ 29.025980] Starting XFS recovery on filesystem: md0 (logdev: internal) [ 32.680486] XFS: xlog_recover_process_data: bad clientid [ 32.680495] XFS: log mount/recovery failed: error 5 [ 32.682773] XFS: log mount failed I ran fdisk and flagged sdg1 and sdh1 as fd. I tried to reassemble the array but it didnt work: no matter what was in mdadm.conf, it still uses sdg and sdh instead of sdg1 and sdh1. I checked in /dev and I see no sdg1 and and sdh1, shich explains why it wont use it. I just don't know why those partitions are gone from /dev and how to readd those... blkid : /dev/sda1: LABEL="boot" UUID="519790ae-32fe-4c15-a7f6-f1bea8139409" TYPE="ext2" /dev/sda2: TYPE="swap" /dev/sda3: LABEL="root" UUID="91390d23-ed31-4af0-917e-e599457f6155" TYPE="ext3" /dev/sdb1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdc1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdd1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sde1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdf1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdg: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdh: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" fdisk -l : Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8c878c87 Device Boot Start End Blocks Id System /dev/sda1 * 1 12 96358+ 83 Linux /dev/sda2 13 134 979965 82 Linux swap / Solaris /dev/sda3 135 4865 38001757+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc9bdc1e9 Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xcc356c30 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe87f7a3d Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xb17a2d22 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdg: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8f3bce61 Device Boot Start End Blocks Id System /dev/sdg1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdh: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa98062ce Device Boot Start End Blocks Id System /dev/sdh1 1 121601 976760001 fd Linux raid autodetect I really dont know what happened nor how to recover from this mess. Needless to say the 5TB or so worth of data sitting on those disks are very valuable to me... Any idea any one? Did anybody ever experienced a similar situation or know how to recover from it ? Can someone help me? I'm really desperate... :x

    Read the article

  • Pulseaudio is no longer working in Debian Squeeze: 'Failed to open module "module-combine-sink": file not found'

    - by mattalexx
    I'm having a problem with pulseaudio. My machine crashed, and when I rebooted and ran pavucontrol, I got a "Connection Failed: Connection refused" dialog. When I run pulseaudio --log-level=info --log-target=stderr from the command line, I get the following output: [...] I: alsa-util.c: Error opening PCM device front:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device front:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: card.c: Created 0 "alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" I: alsa-sink.c: Successfully opened device front:1. I: alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo). I: alsa-sink.c: Successfully enabled mmap() mode. I: alsa-sink.c: Successfully enabled timer-based scheduling mode. I: (alsa-lib)control.c: Invalid CTL front:1 I: alsa-mixer.c: Unable to attach to mixer front:1: No such file or directory I: alsa-mixer.c: Successfully attached to mixer 'hw:1' W: alsa-mixer.c: Your kernel driver is broken: it reports a volume range from 0.00 dB to 0.00 dB which makes no sense. I: module-device-restore.c: Restoring volume for sink alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo. I: sink.c: Created sink 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: sink.c: alsa.resolution_bits = "16" I: sink.c: device.api = "alsa" I: sink.c: device.class = "sound" I: sink.c: alsa.class = "generic" I: sink.c: alsa.subclass = "generic-mix" I: sink.c: alsa.name = "USB Audio" I: sink.c: alsa.id = "USB Audio" I: sink.c: alsa.subdevice = "0" I: sink.c: alsa.subdevice_name = "subdevice #0" I: sink.c: alsa.device = "0" I: sink.c: alsa.card = "1" I: sink.c: alsa.card_name = "DigiHug USB Audio" I: sink.c: alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:1a.0-1.2, full speed" I: sink.c: alsa.driver_name = "snd_usb_audio" I: sink.c: device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.1" I: sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1" I: sink.c: udev.id = "usb-FiiO_DigiHug_USB_Audio-01-Audio" I: sink.c: device.bus = "usb" I: sink.c: device.vendor.id = "1852" I: sink.c: device.vendor.name = "GYROCOM C&C Co., LTD" I: sink.c: device.product.id = "7022" I: sink.c: device.product.name = "DigiHug_USB_Audio" I: sink.c: device.serial = "FiiO_DigiHug_USB_Audio" I: sink.c: device.string = "front:1" I: sink.c: device.buffering.buffer_size = "352800" I: sink.c: device.buffering.fragment_size = "176400" I: sink.c: device.access_mode = "mmap+timer" I: sink.c: device.profile.name = "analog-stereo" I: sink.c: device.profile.description = "Analog Stereo" I: sink.c: device.description = "DigiHug_USB_Audio Analog Stereo" I: sink.c: alsa.mixer_name = "USB Mixer" I: sink.c: alsa.components = "USB1852:7022" I: sink.c: module-udev-detect.discovered = "1" I: sink.c: device.icon_name = "audio-card-usb" I: source.c: Created source 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: source.c: device.description = "Monitor of DigiHug_USB_Audio Analog Stereo" I: source.c: device.class = "monitor" I: source.c: alsa.card = "1" I: source.c: alsa.card_name = "DigiHug USB Audio" I: source.c: alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:1a.0-1.2, full speed" I: source.c: alsa.driver_name = "snd_usb_audio" I: source.c: device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.1" I: source.c: sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1" I: source.c: udev.id = "usb-FiiO_DigiHug_USB_Audio-01-Audio" I: source.c: device.bus = "usb" I: source.c: device.vendor.id = "1852" I: source.c: device.vendor.name = "GYROCOM C&C Co., LTD" I: source.c: device.product.id = "7022" I: source.c: device.product.name = "DigiHug_USB_Audio" I: source.c: device.serial = "FiiO_DigiHug_USB_Audio" I: source.c: device.string = "1" I: source.c: module-udev-detect.discovered = "1" I: source.c: device.icon_name = "audio-card-usb" I: alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms) I: alsa-sink.c: Time scheduling watermark is 20.00ms I: alsa-sink.c: Hardware volume ranges from 0 to 110. I: alsa-sink.c: Using hardware volume control. Hardware dB scale not supported. I: alsa-sink.c: Using hardware mute control. I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5. I: alsa-sink.c: Starting playback. I: module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="1" name="usb-FiiO_DigiHug_USB_Audio-01-Audio" card_name="alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1 (alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio) module loaded. I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 8000 Hz. I: alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument I: module-card-restore.c: Restoring profile for card alsa_card.usb-046d_08d7-01-U0x46d0x8d7. I: card.c: Created 1 "alsa_card.usb-046d_08d7-01-U0x46d0x8d7" I: module.c: Loaded "module-alsa-card" (index: #5; argument: "device_id="2" name="usb-046d_08d7-01-U0x46d0x8d7" card_name="alsa_card.usb-046d_08d7-01-U0x46d0x8d7" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/sound/card2 (alsa_card.usb-046d_08d7-01-U0x46d0x8d7) module loaded. I: module-udev-detect.c: Found 3 cards. I: module.c: Loaded "module-udev-detect" (index: #6; argument: ""). I: module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #8; argument: ""). I: module-default-device-restore.c: Saved default sink 'alsa_output.pci-0000_00_1b.0.analog-surround-41' not existant, not restoring default sink setting. I: module-default-device-restore.c: Saved default source 'alsa_output.pci-0000_00_1b.0.analog-surround-41.monitor' not existant, not restoring default source setting. I: module.c: Loaded "module-default-device-restore" (index: #9; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #10; argument: ""). I: module.c: Loaded "module-always-sink" (index: #11; argument: ""). I: module.c: Loaded "module-intended-roles" (index: #12; argument: ""). I: module.c: Loaded "module-suspend-on-idle" (index: #13; argument: ""). I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2" I: module.c: Loaded "module-console-kit" (index: #14; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #15; argument: ""). I: module.c: Loaded "module-cork-music-on-phone" (index: #16; argument: ""). E: module.c: Failed to open module "module-combine-sink": file not found E: main.c: Module load failed. E: main.c: Failed to initialize daemon. I: module.c: Unloading "module-device-restore" (index: #0). I: module.c: Unloaded "module-device-restore" (index: #0). I: module.c: Unloading "module-stream-restore" (index: #1). I: module.c: Unloaded "module-stream-restore" (index: #1). I: module.c: Unloading "module-card-restore" (index: #2). I: module.c: Unloaded "module-card-restore" (index: #2). I: module.c: Unloading "module-augment-properties" (index: #3). I: module.c: Unloaded "module-augment-properties" (index: #3). I: module.c: Unloading "module-alsa-card" (index: #4). I: sink.c: Freeing sink 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo" I: source.c: Freeing source 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo.monitor" I: card.c: Freed 0 "alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" I: module.c: Unloaded "module-alsa-card" (index: #4). I: module.c: Unloading "module-alsa-card" (index: #5). I: card.c: Freed 1 "alsa_card.usb-046d_08d7-01-U0x46d0x8d7" I: module.c: Unloaded "module-alsa-card" (index: #5). I: module.c: Unloading "module-udev-detect" (index: #6). I: module.c: Unloaded "module-udev-detect" (index: #6). I: module.c: Unloading "module-esound-protocol-unix" (index: #7). I: module.c: Unloaded "module-esound-protocol-unix" (index: #7). I: module.c: Unloading "module-native-protocol-unix" (index: #8). I: module.c: Unloaded "module-native-protocol-unix" (index: #8). I: module.c: Unloading "module-default-device-restore" (index: #9). I: module.c: Unloaded "module-default-device-restore" (index: #9). I: module.c: Unloading "module-rescue-streams" (index: #10). I: module.c: Unloaded "module-rescue-streams" (index: #10). I: module.c: Unloading "module-always-sink" (index: #11). I: module.c: Unloaded "module-always-sink" (index: #11). I: module.c: Unloading "module-intended-roles" (index: #12). I: module.c: Unloaded "module-intended-roles" (index: #12). I: module.c: Unloading "module-suspend-on-idle" (index: #13). I: module.c: Unloaded "module-suspend-on-idle" (index: #13). I: module.c: Unloading "module-console-kit" (index: #14). I: client.c: Freed 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2" I: module.c: Unloaded "module-console-kit" (index: #14). I: module.c: Unloading "module-position-event-sounds" (index: #15). I: module.c: Unloaded "module-position-event-sounds" (index: #15). I: module.c: Unloading "module-cork-music-on-phone" (index: #16). I: module.c: Unloaded "module-cork-music-on-phone" (index: #16). I: main.c: Daemon terminated. I believe the relevant part is this: E: module.c: Failed to open module "module-combine-sink": file not found E: main.c: Module load failed. E: main.c: Failed to initialize daemon. I tried uninstalling and reinstalling pulseaudio, I tried to find a way to install module-combine-sink. Nothing worked. I'm on a Debian Squeeze 32-bit machine. What can I do to fix this?

    Read the article

  • Cannot install grub to RAID1 (md0)

    - by Andrew Answer
    I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat This is the my mdadm output after sync: /dev/md0: Version : 0.90 Creation Time : Wed Feb 17 16:18:25 2010 Raid Level : raid1 Array Size : 470455360 (448.66 GiB 481.75 GB) Used Dev Size : 470455360 (448.66 GiB 481.75 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Nov 1 15:19:31 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 92e6ff4e:ed3ab4bf:fee5eb6c:d9b9cb11 Events : 0.11049560 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. This is my fdisk -l output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057d19 Device Boot Start End Blocks Id System /dev/sda1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sda2 940910985 976768064 17928540 5 Extended /dev/sda5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table This is my grub install output: root@answe:~# grub-install /dev/sda /usr/sbin/grub-setup: warn: Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet.. /usr/sbin/grub-setup: error: embedding is not possible, but this is required for cross-disk install. root@answe:~# grub-install /dev/sdb Installation finished. No error reported. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... Anybody can resolve this issue? I have big headache with this.

    Read the article

  • I lost /dev/md2 on my server

    - by sten
    Hi, My 2 hard drives fried at the same moment apparently. My host company rebooted my server in rescue mode and I am trying to recover my data. They told me to mount /dev/sda2 to recover the data I need but, looking at a similar server that I have in pool, the data I'm looking for should be instead in /dev/md2. I can find /dev/md0 but not /dev/md2 (nor /dev/md1). I've looked on several places on the web and I could only find messages explaining how to create new partition. I just need to recover some data, not all of it and I'll be glad if anyone could help me to mount the /dev/md2 folder (or any other trick that would allow me to recover the data that was stored there). Thanks in advance, Sten

    Read the article

  • Enabling OUD Entry Cache for large static groups

    - by Sylvain Duloutre
    Oracle Unified Directory can take advantage of several caches to improve performances. especially the so-called database cache and the file system cache. In addition to that, it is possible to use an entry cache to cache LDAP entries. By default, the entry cache is not used. In specific deployements involving large static groups, it may worth loading the group entries to the entry cache to speed up group membership and group-based aci evaluation. To do so, run the following commands: First, specify which entries should reside in the entry cache. In the commad below, only entries matching the LDAP filter " (|(objctclass=groupOfNames)(objectclass=groupOfUniqueNames)) " will be stored in the entry cache. dsconfig set-entry-cache-prop \          --cache-name FIFO \          --add include-filter:\(\|\(objctclass=groupOfNames\)\(objectclass=groupOfUniqueNames\)\)          --port <ADMIN_PORT> \          --bindDN cn=Directory\ Manager \          --bindPassword ****** \          --no-prompt Then enable the entry cache: dsconfig set-entry-cache-prop \          --cache-name FIFO \          --set enabled:true \          --port <ADMIN_PORT> \          --bindDN cn=Directory\ Manager \          --bindPassword ****** \          --no-prompt In addition to that, you can control how much memory the entry cache can use: oud@s96sec1d0-v3:/application/oud : dsconfig -X -n -p <ADMIN PORT> -D "cn=Directory Manager" -w <password> get-entry-cache-prop --cache-name FIFO Property           : Value(s) -------------------:----------------------------------------------------------- cache-level        : 1 enabled            : true exclude-filter     : - include-filter     : (|(objctclass=groupOfNames)(objectclass=groupOfUniqueNames)) max-entries        : 2147483647 max-memory-percent : 90 You can change the max-entries amd max-memory-percent properties to control the entry cache size using the dsconfig set-entry-cache-prop command.

    Read the article

  • Security in OBIEE 11g, Part 2

    - by Rob Reynolds
    Continuing the series on OBIEE 11g, our guest blogger this week is Pravin Janardanam. Here is Part 2 of his overview of Security in OBIEE 11g. OBIEE 11g Security Overview, Part 2 by Pravin Janardanam In my previous blog on Security, I discussed the OBIEE 11g changes regarding Authentication mechanism, RPD protection and encryption. This blog will include a discussion about OBIEE 11g Authorization and other Security aspects. Authorization: Authorization in 10g was achieved using a combination of Users, Groups and association of privileges and object permissions to users and Groups. Two keys changes to Authorization in OBIEE 11g are: Application Roles Policies / Permission Groups Application Roles are introduced in OBIEE 11g. An application role is specific to the application. They can be mapped to other application roles defined in the same application scope and also to enterprise users or groups, and they are used in authorization decisions. Application roles in 11g take the place of Groups in 10g within OBIEE application. In OBIEE 10g, any changes to corporate LDAP groups require a corresponding change to Groups and their permission assignment. In OBIEE 11g, Application roles provide insulation between permission definitions and corporate LDAP Groups. Permissions are defined at Application Role level and changes to LDAP groups just require a reassignment of the Group to the Application Roles. Permissions and privileges are assigned to Application Roles and users in OBIEE 11g compared to Groups and Users in 10g. The diagram below shows the relationship between users, groups and application roles. Note that the Groups shown in the diagram refer to LDAP Groups (WebLogic Groups by default) and not OBIEE application Groups. The following screenshot compares the permission windows from Admin tool in 10g vs 11g. Note that the Groups in the OBIEE 10g are replaced with Application Roles in OBIEE 11g. The same is applicable to OBIEE web catalog objects.    The default Application Roles available after OBIEE 11g installation are BIAdministrator, BISystem, BIConsumer and BIAuthor. Application policies are the authorization policies that an application relies upon for controlling access to its resources. An Application Role is defined by the Application Policy. The following screenshot shows the policies defined for BIAdministrator and BISystem Roles. Note that the permission for impersonation is granted to BISystem Role. In OBIEE 10g, the permission to manage repositories and Impersonation were assigned to “Administrators” group with no control to separate these permissions in the Administrators group. Hence user “Administrator” also had the permission to impersonate. In OBI11g, BIAdministrator does not have the permission to impersonate. This gives more flexibility to have multiple users perform different administrative functions. Application Roles, Policies, association of Policies to application roles and association of users and groups to application roles are managed using Fusion Middleware Enterprise Manager (FMW EM). They reside in the policy store, identified by the system-jazn-data.xml file. The screenshots below show where they are created and managed in FMW EM. The following screenshot shows the assignment of WebLogic Groups to Application Roles. The following screenshot shows the assignment of Permissions to Application Roles (Application Policies). Note: Object level permission association to Applications Roles resides in the RPD for repository objects. Permissions and Privilege for web catalog objects resides in the OBIEE Web Catalog. Wherever Groups were used in the web catalog and RPD has been replaced with Application roles in OBIEE 11g. Following are the tools used in OBIEE 11g Security Administration: ·       Users and Groups are managed in Oracle WebLogic Administration console (by default). If WebLogic is integrated with other LDAP products, then Users and Groups needs to managed using the interface provide by the respective LDAP vendor – New in OBIEE 11g ·       Application Roles and Application Policies are managed in Oracle Enterprise Manager - Fusion Middleware Control – New in OBIEE 11g ·       Repository object permissions are managed in OBIEE Administration tool – Same as 10g but the assignment is to Application Roles instead of Groups ·       Presentation Services Catalog Permissions and Privileges are managed in OBI Application administration page - Same as 10g but the assignment is to Application Roles instead of Groups Credential Store: Credential Store is a single consolidated service provider to store and manage the application credentials securely. The credential store contains credentials that either user supplied or system generated. Credential store in OBIEE 10g is file based and is managed using cryptotools utility. In 11g, Credential store can be managed directly from the FMW Enterprise Manager and is stored in cwallet.sso file. By default, the Credential Store stores password for deployed RPDs, BI Publisher data sources and BISystem user. In addition, Credential store can be LDAP based but only Oracle Internet Directory is supported right now. As you can see OBIEE security is integrated with Oracle Fusion Middleware security architecture. This provides a common security framework for all components of Business Intelligence and Fusion Middleware applications.

    Read the article

  • Problem with reformatting Sandisk read-only USB drive

    - by dimas
    Hi everyone I have a problem reformatting my USB drive. Its showing this error message whenever I tried to reformat it using gparted: Parted 0.11.0 --enable-libparted-dmraid Libparted 2.3 Format /dev/sdb1 as ntfs 00:00:01 ( ERROR ) calibrate /dev/sdb1 00:00:01 ( SUCCESS ) path: /dev/sdb1 start: 22,768 end: 31,248,383 size: 31,225,616 (14.89 GiB) set partition type on /dev/sdb1 00:00:00 ( ERROR ) libparted messages ( INFO ) Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Can't write to /dev/sdb, because it is opened read-only. Unable to open /dev/sdb read-write (Read-only file system). /dev/sdb has been opened read-only. Reason I wanted to reformat it is because it just suddenly stopped working when I was transferring files from my pc and also it erased every content that was saved in the usb drive. I tried various tutorials on the net regarding this however I can't find a solution on how to make a usb drive change its read-only property to read-write or anything that would enable me to reformat this usb drive. I have also checked this link format read-only USB drive but this one doesn't have a solution. Also am attempting to do this on Ubuntu 12.04.

    Read the article

  • How to recover unavailable memory in /dev/shm

    - by Alain Labbe
    Good day to all, I have a question regarding the use of /dev/shm. I use it as a temporary folder for large files to speed up processing and save IO off the HD. My problem is that some of my scripts sometimes require "forceful" interruption for a variety of reasons. I can then manually remove the files left over in /dev/shm but the memory is not returned to available space (as seen by df -h). Is there any way to recover the memory without restarting the system? I'm using LTS12.04 and most of the scripts are PERL running system call on C programs (bioinformatics tools). Thanks.

    Read the article

  • grub-probe: error: cannot find a GRUB drive for /dev/sda1

    - by Thilina
    I'm trying to add windows 7 for my new 12.10 grub bootloader. None of the things worked out; such as .. copying bootx64.efi methods, I'm getting this output: grub-probe --target=fs_uuid /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi grub-probe: error: cannot find a GRUB drive for /dev/sda1. Check your device.map. ....... my device map ....... (hd0) /dev/disk/by-id/ata-WDC_WD6400BPVT-55HXZT3_WD-WXD1EA1MSVR4 ....... 40_custom ..... menuentry "Microsoft Windows x86_64 UEFI-GPT" { insmod part_gpt insmod fat insmod search_fs_uuid insmod chain search --fs-uuid --no-floppy --set=root 80BD-E086 chainloader (${root})/efi/Microsoft/Boot/bootmgfw.efi } When booting to windows 7 give me blank black screen with a cursor blinks for 2 seconds then reboot, I've tried boot-repair too. I think I'm missing Windows UEFI Bootloader files.

    Read the article

  • Mapping Repeating Sequence Groups in BizTalk

    - by Paul Petrov
    Repeating sequence groups can often be seen in real life XML documents. It happens when certain sequence of elements repeats in the instance document. Here’s fairly abstract example of schema definition that contains sequence group: <xs:schemaxmlns:b="http://schemas.microsoft.com/BizTalk/2003"            xmlns:xs="http://www.w3.org/2001/XMLSchema"            xmlns="NS-Schema1"            targetNamespace="NS-Schema1" >  <xs:elementname="RepeatingSequenceGroups">     <xs:complexType>       <xs:sequencemaxOccurs="1"minOccurs="0">         <xs:sequencemaxOccurs="unbounded">           <xs:elementname="A"type="xs:string" />           <xs:elementname="B"type="xs:string" />           <xs:elementname="C"type="xs:string"minOccurs="0" />         </xs:sequence>       </xs:sequence>     </xs:complexType>  </xs:element> </xs:schema> And here’s corresponding XML instance document: <ns0:RepeatingSequenceGroupsxmlns:ns0="NS-Schema1">  <A>A1</A>  <B>B1</B>  <C>C1</C>  <A>A2</A>  <B>B2</B>  <A>A3</A>  <B>B3</B>  <C>C3</C> </ns0:RepeatingSequenceGroups> As you can see elements A, B, and C are children of anonymous xs:sequence element which in turn can be repeated N times. Let’s say we need do simple mapping to the schema with similar structure but with different element names: <ns0:Destinationxmlns:ns0="NS-Schema2">  <Alpha>A1</Alpha>  <Beta>B1</Beta>  <Gamma>C1</Gamma>  <Alpha>A2</Alpha>  <Beta>B2</Beta>  <Gamma>C2</Gamma> </ns0:Destination> The basic map for such typical task would look pretty straightforward: If we test this map without any modification it will produce following result: <ns0:Destinationxmlns:ns0="NS-Schema2">  <Alpha>A1</Alpha>  <Alpha>A2</Alpha>  <Alpha>A3</Alpha>  <Beta>B1</Beta>  <Beta>B2</Beta>  <Beta>B3</Beta>  <Gamma>C1</Gamma>  <Gamma>C3</Gamma> </ns0:Destination> The original order of the elements inside sequence is lost and that’s not what we want. Default behavior of the BizTalk 2009 and 2010 Map Editor is to generate compatible map with older versions that did not have ability to preserve sequence order. To enable this feature simply open map file (*.btm) in text/xml editor and find attribute PreserveSequenceOrder of the root <mapsource> element. Set its value to Yes and re-test the map: <ns0:Destinationxmlns:ns0="NS-Schema2">  <Alpha>A1</Alpha>  <Beta>B1</Beta>  <Gamma>C1</Gamma>  <Alpha>A2</Alpha>  <Beta>B2</Beta>  <Alpha>A3</Alpha>  <Beta>B3</Beta>  <Gamma>C3</Gamma> </ns0:Destination> The result is as expected – all corresponding elements are in the same order as in the source document. Under the hood it is achieved by using one common xsl:for-each statement that pulls all elements in original order (rather than using individual for-each statement per element name in default mode) and xsl:if statements to test current element in the loop:  <xsl:templatematch="/s0:RepeatingSequenceGroups">     <ns0:Destination>       <xsl:for-eachselect="A|B|C">         <xsl:iftest="local-name()='A'">           <Alpha>             <xsl:value-ofselect="./text()" />           </Alpha>         </xsl:if>         <xsl:iftest="local-name()='B'">           <Beta>             <xsl:value-ofselect="./text()" />           </Beta>         </xsl:if>         <xsl:iftest="local-name()='C'">           <Gamma>             <xsl:value-ofselect="./text()" />           </Gamma>         </xsl:if>       </xsl:for-each>     </ns0:Destination>  </xsl:template> BizTalk Map editor became smarter so learn and use this lesser known feature of XSLT 2.0 in your maps and XSL stylesheets.

    Read the article

  • Centos INODES usage

    - by MSTF
    We are using Centos & cPanel server but we have a important problem for INODES usage. "df -i" command showing for / directory using 6 million inodes!. When I check number of files for / directory, it has few thousand files. df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda4 6578176 6567525 10651 100% / tmpfs 8238094 1 8238093 1% /dev/shm /dev/sdi1 61054976 169 61054807 1% /backup /dev/sda1 51296 38 51258 1% /boot /dev/sda2 0 0 0 - /boot/efi /dev/sdc1 7290880 1252 7289628 1% /database /dev/sdb2 4096000 53258 4042742 2% /home /dev/sdd1 7290880 3500 7287380 1% /home2 /dev/sde1 7290880 68909 7221971 1% /home3 /dev/sdg1 7290880 68812 7222068 1% /home5 /dev/sdh1 7290880 695076 6595804 10% /home6 /dev/sdf1 7290880 58658 7232222 1% /tmp df -h Filesystem Size Used Avail Use% Mounted on /dev/sda4 99G 30G 65G 32% / tmpfs 32G 0 32G 0% /dev/shm /dev/sdi1 917G 270G 601G 32% /backup /dev/sda1 788M 80M 669M 11% /boot /dev/sda2 400M 296K 400M 1% /boot/efi /dev/sdc1 110G 1.5G 103G 2% /database /dev/sdb2 62G 1.1G 58G 2% /home /dev/sdd1 110G 79G 26G 76% /home2 /dev/sde1 110G 3.9G 101G 4% /home3 /dev/sdg1 110G 51G 54G 49% /home5 /dev/sdh1 110G 64G 41G 62% /home6 /dev/sdf1 110G 611M 104G 1% /tmp SDA disk just have Operating System and cPanel. There is no account, database, tmp on SDA disk. Why SDA using high inodes? Note: All disks is SSD 120GB Thanks.

    Read the article

  • Windows Azure : suivez le streaming du Dev Camp en direct sur Developpez.com

    Le 20 juin aura lieu la journée Dev Camp consacrée à Azure. [IMG]http://i.msdn.microsoft.com/hh868108.azure-camps(fr-fr,MSDN.10).png[/IMG] Cette journée est l'occasion de découvrir tous les services Cloud d'Azure (SQL Azure, Stockage avec Windows Azure Storage, Back-end, etc.), d'apprendre comment réaliser des projets et héberger des applications ? ou des sites webs - sur la plateforme. L'Azure Dev Camp abordera également les applications multi-tiers et la manière de « migrer, intégrer et étendre votre code et vos applications existantes grâce à Windows Azure ». Cette journée abordera aussi la construction d'APIs Web pour enrichir des applications mobiles iOS, Android et bien sûr Windows Phone. Enfin, le rendez-vous...

    Read the article

  • What does /dev/null mean in the shell?

    - by rishiag
    I've started learning bash scripting by using this guide: http://www.tldp.org/LDP/abs/abs-guide.pdf However I got stuck at the first script: cd /var/log cat /dev/null > messages cat /dev/null > wtmp echo "Log files cleaned up." What do lines 2 and 3 do in Ubuntu (I understand cat)? Is it only for other Linux distributions? After running this script as root, the output I get is Log files cleaned up. But /var/log still contains all the files.

    Read the article

  • Unable to mount /dev/loop0 during install

    - by AJP
    I was installing 32-bit Ubuntu(ubuntu-10.10-desktop-i386.iso) on VMWare workstation 7.1. During installation an error came up with the following text. (initramfs) mount: mounting dev/loop0 on //filesystem.squashfs failed: Input/Output error Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs I did a memory test which was successful, but when selecting "Try Ubuntu without installing", "Install Ubuntu" or "Check disk for defects" the same error is showing up. I download the ISO image from Ubuntu website "http://www.ubuntu.com/desktop/get-ubuntu/download". As I couldn't find the checksum data, the ISO image was verified by mounting to a virtual drive and browsing the contents. The ISO image is mounted to a virtual drive in VMWare and not burnt to a CD.

    Read the article

  • Windows Azure : J-2 avant le dev camp en direct sur Developpez.com, réservez votre mercredi

    Le 20 juin aura lieu la journée Dev Camp consacrée à Azure. [IMG]http://i.msdn.microsoft.com/hh868108.azure-camps(fr-fr,MSDN.10).png[/IMG] Cette journée est l'occasion de découvrir tous les services Cloud d'Azure (SQL Azure, Stockage avec Windows Azure Storage, Back-end, etc.), d'apprendre comment réaliser des projets et héberger des applications ? ou des sites webs - sur la plateforme. L'Azure Dev Camp abordera également les applications multi-tiers et la manière de « migrer, intégrer et étendre votre code et vos applications existantes grâce à Windows Azure ». Cette journée abordera aussi la construction d'APIs Web pour enrichir des applications mobiles iOS, Android et bien sûr Windows Phone. Enfin, le rendez-vous...

    Read the article

  • libpam-ldapd not looking for secondary groups

    - by Jorge Suárez de Lis
    I'm migrating from libpam-ldap to libpam-ldapd. I'm having some trouble gathering the secondary groups from LDAP. On libpam-ldap, I had this on the /etc/ldap.conf file: nss_schema rfc2307bis nss_base_passwd ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es nss_base_shadow ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es nss_base_group ou=Groups,ou=CITIUS,dc=inv,dc=usc,dc=es nss_map_attribute uniqueMember member The mapping is there because I'm using groupOfNames instead of groupOfUniqueNames LDAP class for groups, so the attribute naming the members is named member instead of uniqueMember. Now, I want to do the same using libpam-ldapd but I can't get it to work. Here's the relevant part of my /etc/nslcd.conf: base passwd ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es base shadow ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es base group ou=Groups,ou=CITIUS,dc=inv,dc=usc,dc=es map group uniqueMember member And this is the debug output from nslcd, when a user is authenticated: nslcd: [8b4567] DEBUG: connection from pid=12090 uid=0 gid=0 nslcd: [8b4567] DEBUG: nslcd_passwd_byuid(4004) nslcd: [8b4567] DEBUG: myldap_search(base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es", filter="(&(objectClass=posixAccount)(uidNumber=4004))") nslcd: [8b4567] DEBUG: ldap_initialize(ldap://172.16.54.31/) nslcd: [8b4567] DEBUG: ldap_set_rebind_proc() nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_PROTOCOL_VERSION,3) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_DEREF,0) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_TIMELIMIT,10) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_TIMEOUT,10) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_NETWORK_TIMEOUT,10) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_REFERRALS,LDAP_OPT_ON) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_RESTART,LDAP_OPT_ON) nslcd: [8b4567] DEBUG: ldap_simple_bind_s("uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es","*****") (uri="ldap://172.16.54.31/") nslcd: [8b4567] connected to LDAP server ldap://172.16.54.31/ nslcd: [8b4567] DEBUG: ldap_result(): end of results nslcd: [7b23c6] DEBUG: connection from pid=15906 uid=0 gid=2000 nslcd: [7b23c6] DEBUG: nslcd_pam_authc("jorge.suarez","","su","***") nslcd: [7b23c6] DEBUG: myldap_search(base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es", filter="(&(objectClass=posixAccount)(uid=jorge.suarez))") nslcd: [7b23c6] DEBUG: ldap_initialize(ldap://172.16.54.31/) nslcd: [7b23c6] DEBUG: ldap_set_rebind_proc() nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_PROTOCOL_VERSION,3) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_DEREF,0) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_TIMELIMIT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_TIMEOUT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_NETWORK_TIMEOUT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_REFERRALS,LDAP_OPT_ON) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_RESTART,LDAP_OPT_ON) nslcd: [7b23c6] DEBUG: ldap_simple_bind_s("uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es","*****") (uri="ldap://172.16.54.31/") nslcd: [7b23c6] connected to LDAP server ldap://172.16.54.31/ nslcd: [7b23c6] DEBUG: ldap_initialize(ldap://172.16.54.31/) nslcd: [7b23c6] DEBUG: ldap_set_rebind_proc() nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_PROTOCOL_VERSION,3) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_DEREF,0) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_TIMELIMIT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_TIMEOUT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_NETWORK_TIMEOUT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_REFERRALS,LDAP_OPT_ON) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_RESTART,LDAP_OPT_ON) nslcd: [7b23c6] DEBUG: ldap_simple_bind_s("uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es","*****") (uri="ldap://172.16.54.31/") nslcd: [7b23c6] connected to LDAP server ldap://172.16.54.31/ nslcd: [7b23c6] DEBUG: myldap_search(base="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es", filter="(objectClass=posixAccount)") nslcd: [7b23c6] DEBUG: ldap_unbind() nslcd: [3c9869] DEBUG: connection from pid=15906 uid=0 gid=2000 nslcd: [3c9869] DEBUG: nslcd_pam_sess_o("jorge.suarez","uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es","su","/dev/pts/7","","jorge.suarez") It seems to me that it won't even try to look for groups. What I am doing wrong? I can't see anything relevant to my problem information on the docs. I'm probably not understanding how the map option works.

    Read the article

  • Finding the groups of a user in WLS with OPSS

    - by user12587121
    How to find the group memberships for a user from a web application running in Weblogic server ?  This is useful for building up the profile of the user for security purposes for example. WLS as a container offers an identity store service which applications can access to query and manage identities known to the container.  This article for example shows how to recover the groups of the current user, but how can we find the same information for an arbitrary user ? It is the Oracle Platform for Securtiy Services (OPSS) that looks after the identity store in WLS and so it is in the OPSS APIs that we can find the way to recover this information. This is explained in the following documents.  Starting from the FMW 11.1.1.5 book list, with the Security Overview document we can see how WLS uses OPSS: Proceeding to the more detailed Application Security document, we find this list of useful references for security in FMW. We can follow on into the User/Role API javadoc. The Application Security document explains how to ensure that the identity store is configured appropriately to allow the OPSS APIs to work.  We must verify that the jps-config.xml file where the application  is deployed has it's identity store configured--look for the following elements in that file: <serviceProvider type="IDENTITY_STORE" name="idstore.ldap.provider" class="oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider">             <description>LDAP-based IdentityStore Provider</description>  </serviceProvider> <serviceInstance name="idstore.ldap" provider="idstore.ldap.provider">             <property name="idstore.config.provider" value="oracle.security.jps.wls.internal.idstore.WlsLdapIdStoreConfigProvider"/>             <property name="CONNECTION_POOL_CLASS" value="oracle.security.idm.providers.stdldap.JNDIPool"/></serviceInstance> <serviceInstanceRef ref="idstore.ldap"/> The document contains a code sample for using the identity store here. Once we have the identity store reference we can recover the user's group memberships using the RoleManager interface:             RoleManager roleManager = idStore.getRoleManager();            SearchResponse grantedRoles = null;            try{                System.out.println("Retrieving granted WLS roles for user " + userPrincipal.getName());                grantedRoles = roleManager.getGrantedRoles(userPrincipal, false);                while( grantedRoles.hasNext()){                      Identity id = grantedRoles.next();                      System.out.println("  disp name=" + id.getDisplayName() +                                  " Name=" + id.getName() +                                  " Principal=" + id.getPrincipal() +                                  "Unique Name=" + id.getUniqueName());                     // Here, we must use WLSGroupImpl() to build the Principal otherwise                     // OES does not recognize it.                      retSubject.getPrincipals().add(new WLSGroupImpl(id.getPrincipal().getName()));                 }            }catch(Exception ex) {                System.out.println("Error getting roles for user " + ex.getMessage());                ex.printStackTrace();            }        }catch(Exception ex) {            System.out.println("OESGateway: Got exception instantiating idstore reference");        } This small JDeveloper project has a simple servlet that executes a request for the user weblogic's roles on executing a get on the default URL.  The full code to recover a user's goups is in the getSubjectWithRoles() method in the project.

    Read the article

  • mdadm raid5 recover double disk failure - with a twist (drive order)

    - by Peter Bos
    Let me acknowledge first off that I have made mistakes, and that I have a backup for most but not all of the data on this RAID. I still have hope of recovering the rest of the data. I don't have the kind of money to take the drives to a recovery expert company. Mistake #0, not having a 100% backup. I know. I have a mdadm RAID5 system of 4x3TB. Drives /dev/sd[b-e], all with one partition /dev/sd[b-e]1. I'm aware that RAID5 on very large drives is risky, yet I did it anyway. Recent events The RAID become degraded after a two drive failure. One drive [/dev/sdc] is really gone, the other [/dev/sde] came back up after a power cycle, but was not automatically re-added to the RAID. So I was left with a 4 device RAID with only 2 active drives [/dev/sdb and /dev/sdd]. Mistake #1, not using dd copies of the drives for restoring the RAID. I did not have the drives or the time. Mistake #2, not making a backup of the superblock and mdadm -E of the remaining drives. Recovery attempt I reassembled the RAID in degraded mode with mdadm --assemble --force /dev/md0, using /dev/sd[bde]1. I could then access my data. I replaced /dev/sdc with a spare; empty; identical drive. I removed the old /dev/sdc1 from the RAID mdadm --fail /dev/md0 /dev/sdc1 Mistake #3, not doing this before replacing the drive I then partitioned the new /dev/sdc and added it to the RAID. mdadm --add /dev/md0 /dev/sdc1 It then began to restore the RAID. ETA 300 mins. I followed the process via /proc/mdstat to 2% and then went to do other stuff. Checking the result Several hours (but less then 300 mins) later, I checked the process. It had stopped due to a read error on /dev/sde1. Here is where the trouble really starts I then removed /dev/sde1 from the RAID and re-added it. I can't remember why I did this; it was late. mdadm --manage /dev/md0 --remove /dev/sde1 mdadm --manage /dev/md0 --add /dev/sde1 However, /dev/sde1 was now marked as spare. So I decided to recreate the whole array using --assume-clean using what I thought was the right order, and with /dev/sdc1 missing. mdadm --create /dev/md0 --assume-clean -l5 -n4 /dev/sdb1 missing /dev/sdd1 /dev/sde1 That worked, but the filesystem was not recognized while trying to mount. (It should have been EXT4). Device order I then checked a recent backup I had of /proc/mdstat, and I found the drive order. md0 : active raid5 sdb1[0] sde1[4] sdd1[2] sdc1[1] 8790402048 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/4] [UUUU] I then remembered this RAID had suffered a drive loss about a year ago, and recovered from it by replacing the faulty drive with a spare one. That may have scrambled the device order a bit...so there was no drive [3] but only [0],[1],[2], and [4]. I tried to find the drive order with the Permute_array script: https://raid.wiki.kernel.org/index.php/Permute_array.pl but that did not find the right order. Questions I now have two main questions: I screwed up all the superblocks on the drives, but only gave: mdadm --create --assume-clean commands (so I should not have overwritten the data itself on /dev/sd[bde]1. Am I right that in theory the RAID can be restored [assuming for a moment that /dev/sde1 is ok] if I just find the right device order? Is it important that /dev/sde1 be given the device number [4] in the RAID? When I create it with mdadm --create /dev/md0 --assume-clean -l5 -n4 \ /dev/sdb1 missing /dev/sdd1 /dev/sde1 it is assigned the number [3]. I wonder if that is relevant to the calculation of the parity blocks. If it turns out to be important, how can I recreate the array with /dev/sdb1[0] missing[1] /dev/sdd1[2] /dev/sde1[4]? If I could get that to work I could start it in degraded mode and add the new drive /dev/sdc1 and let it resync again. It's OK if you would like to point out to me that this may not have been the best course of action, but you'll find that I realized this. It would be great if anyone has any suggestions.

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >