Search Results

Search found 14873 results on 595 pages for 'hard drives'.

Page 8/595 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• Hard drives (SATA/ATA) corrupting

  - by JC Denton

  Hello All, 2 years ago I bought relatives a new computer for christmas and installed Ubuntu on it. Ever since then it has been experiencing problems with the hard drives. The hard drive supplied with the machine was a SATA drive. When it appeared it was having problems (files and folders with invalid encoding started appearing) I replaced the SATA drive with the drive of their previous computer. I replaced it (The replacement) later on, the drive being rather old and thus becoming more prone to the risk of failure. The replacement drive is a IDE drive but the same problems started to appear (files and folders showing up in nautilus with invalid encoding). I fear the files and folders that are showing are existing FS entries, starting to corrupt. As it's happening to both the IDE and SATA drive it's unlikely to be the drives themselves or the IDE/SATA controller, I believe. Any ideas as to what could be causing the (assumed) corruption? EDIT: You're right about the paragraphs. They were there in edit mode but I'm still getting to grips with the whitespace format codes. The system is a "Primo Pro" AMD Phenom II X4 Quad Core 920 2.80GHz SILENT DDR2, ordered from overclockers.co.uk and nothing has been added to it except for the replacement of the SATA drive with an AMD drive. It would seem unlikely for a barebones system to be underpowered.

  Read the article

• How harmful is a hard disk spin cycle?

  - by Gilles

  It is conventional wisdom¹ that each time you spin a hard disk down and back up, you shave some time off its life expectancy. The topic has been discussed before: Is turning off hard disks harmful? What's the effect of standby (spindown) mode on modern hard drives? Common explanations for why spindowns and spinups are harmful are that they induce more stress on the mechanical parts than ordinary running, and that they cause heat variations that are harmful to the device mechanics. Is there any data showing quantitatively how bad a spin cycle is? That is, how much life expectancy does a spin cycle cost? Or, more practically, if I know that I'm not going to need a disk for X seconds, how large should X be to warrant spinning down? ¹ But conventional wisdom has been wrong before; for example, it is commonly held that hard disks should be kept as cool as possible, but the one published study on the topic shows that cooler drives actually fail more. This study is no help here since all the disks surveyed were powered on 24/7.

  Read the article

• How harmful is a hard disk spin cycle?

  - by Gilles

  It is conventional wisdom¹ that each time you spin a hard disk down and back up, you shave some time off its life expectancy. The topic has been discussed before: Is turning off hard disks harmful? What's the effect of standby (spindown) mode on modern hard drives? Common explanations for why spindowns and spinups are harmful are that they induce more stress on the mechanical parts than ordinary running, and that they cause heat variations that are harmful to the device mechanics. Is there any data showing quantitatively how bad a spin cycle is? That is, how much life expectancy does a spin cycle cost? Or, more practically, if I know that I'm not going to need a disk for X seconds, how large should X be to warrant spinning down? ¹ But conventional wisdom has been wrong before; for example, it is commonly held that hard disks should be kept as cool as possible, but the one published study on the topic shows that cooler drives actually fail more. This study is no help here since all the disks surveyed were powered on 24/7.

  Read the article

• Toshiba External Hard Drive freezes computer

  - by Ephraim

  I bought a Toshiba Canvio Basics E05A032BAU2XK Portable External 320GB 2.5 Hard Drive: My computer has two Os's on it Win7 and Win XP. I need both. The main one I use is XP. When booting my computer in any OS the computer and hard drive work fine. The same holds true for plugging in the hard drive while running Win7. However, when running WinXP, if the hard drive gets plugged in the computer freezes(my main point is that the HD is portable so it is essential that it does not do this, as I said I usually run XP). After reading some online forums I was informed that there is a compatibility issue with the newest version of Eset Smart Security(I still don't understand this because it works fine in Win7 or when connected on boot...). I disabled the AV and plugged in the HD... Walla! The comnputer did not freeze. However the disk is not recognized in explorer or disk management. In device manager I removed the device and did a scan and installation of device failed. It pretty much sounds like a driver issue but I cannot find any drivers for this HD. In fact, Toshiba claims that there are no downloadable drivers for it and that XP should take care of the drivers itself. What to do? As far as I can tell, all other USB devices work just fine on both OS. Please Help!

  Read the article

• Coffee spilled inside computer, damaged hard drive

  - by Harpreet

  Today coffee spilled over my table, and some of it (very less) reached the PC case placed under the table. I think little bit of it got inside the PC case through the front. As that happened the fan started running very fast and made noise. I tried to restart to see if it becomes fine, but the computer didn't start again. First it gave an error of "Alert! Air temperature sensor not detected" and didn't start. Next I tried again multiple times of starting the computer but then it gave some memory error. I was not able to start the computer. Incase there's a problem in hard disk or something related to memory, is there any way we can extract our work or data? I am scared if I am not able to extract my work in case some problem occurs like that. What options would I have? Help!! EDIT: I have attached the photo here and you can see the area spilt in red circle. The hard drive electronics have been affected and internal speaker may also have been affected. Any advise on cleaning and if hard drive can work? EDIT 2: Are there any professional services offered to extract data from blemished hard disk, like this one, in case I am not able to run it personally?

  Read the article

• Dell XPS 15 L502X hard drive Partition

  - by Mohan Gajula

  I have a situation here. I got my new Dell XPS 15 Laptop. The configuration of hard drive is as below : Volume 1: (OEM Partition): 133MB Volume 2: OS (C:): 685.25 GB Volume 3: Recovery : 13.25 GB Now, I am trying to re-partition my C Drive to have a C: drive with 100 GB and a new drive with 585 GB. Earlier, I tried using the Windows 7 Disk Management to shrink and extend the volume. That lead to the OS and hard drive not working. Dell Tech support tried to fix the issue, but they were not able to fix the issue online. Later a Dell Technician arrived my place, and replaced the hard drive with a new hard drive. Please help me re-partition the C: Drive with 100 GB, and new D drive with 585 GB. I don't want to lose my Recovery Partition. SOLUTION As Suggested by KCotreau below , I have done exactly. I have resized the C drive to 100 GB. And then applied the changes. Windows got restarted. On the boot screen, the partition was taking place. It took around 30 mins ( approx. ). Once after restart, I can see my C drive is 100 GB. Now opened the Easeus again. And created a new partition for the free space ( 585 GB ) this took 10 seconds to create. Here goes the screenshot after partitioning. Thanks to KCotreau. You are amazing.

  Read the article

• Is this hard disk dead?

  - by Korjavin Ivan

  Not sure, is this right site for this Q, but let me try Last time i have problem with hard disk. Sometimes its do strange sound, and i get it from logs: $dmesg | grep ata4 [29409.945516] ata4.00: exception Emask 0x10 SAct 0xf SErr 0x90202 action 0xe frozen [29409.945529] ata4.00: irq_stat 0x00400000, PHY RDY changed [29409.945538] ata4: SError: { RecovComm Persist PHYRdyChg 10B8B } [29409.945546] ata4.00: failed command: READ FPDMA QUEUED [29409.945562] ata4.00: cmd 60/30:00:56:22:5f/00:00:00:00:00/40 tag 0 ncq 24576 in [29409.945573] ata4.00: status: { DRDY } [29409.945580] ata4.00: failed command: READ FPDMA QUEUED [29409.945594] ata4.00: cmd 60/18:08:8e:22:5f/00:00:00:00:00/40 tag 1 ncq 12288 in [29409.945605] ata4.00: status: { DRDY } [29409.945611] ata4.00: failed command: READ FPDMA QUEUED [29409.945625] ata4.00: cmd 60/08:10:46:02:66/00:00:00:00:00/40 tag 2 ncq 4096 in [29409.945635] ata4.00: status: { DRDY } [29409.945641] ata4.00: failed command: READ FPDMA QUEUED [29409.945656] ata4.00: cmd 60/80:18:ee:04:66/00:00:00:00:00/40 tag 3 ncq 65536 in [29409.945666] ata4.00: status: { DRDY } [29409.945679] ata4: hard resetting link [29413.976083] ata4: softreset failed (device not ready) [29413.976097] ata4: applying SB600 PMP SRST workaround and retrying [29414.148070] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [29414.184986] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [29414.243280] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [29414.243292] ata4.00: configured for UDMA/133 [29414.243324] ata4: EH complete [680674.804563] ata4: exception Emask 0x50 SAct 0x0 SErr 0x90a02 action 0xe frozen [680674.804575] ata4: irq_stat 0x00400000, PHY RDY changed [680674.804584] ata4: SError: { RecovComm Persist HostInt PHYRdyChg 10B8B } [680674.804603] ata4: hard resetting link [680678.840561] ata4: softreset failed (device not ready) Is this ata4 sata hard drive dead? Must i change it ASAP ? Need I specify more info?

  Read the article

• Can't mount hard drive. Ubuntu 12.04

  - by Sam

  I am trying to recover some pictures on my 320 GB Hard Disk, so I put in a Live Ubuntu CD and am in that right now. In the devices list, it shows my USB drive, but not my 320 GB Hard Disk. I can see the disk in Disk Utility (it says it's on /dev/sda), but it's not mounted, and it says it has a few bad sectors but it is OK. In Disk Usage Analyzer, it says my maximum capacity is 13.4 GB, so it's definitely not using the 320 GB Hard Disk. I tried the following: sudo mkdir /media/newhd (worked) sudo mount /dev/sda /media/newhd (didn't work. it says I must specify the filesystem type) I then tried: fsck.ext4 -f /dev/sda (didn't work. Said: Superblock invalid, trying to backup blocks. then: Bad magic number in super-block while trying to open /dev/sda. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock) Does anyone have any ideas? The whole problem started when my Windows Vista said "Can't find operating system". Any ideas on how I can get on to my hard drive at /dev/sda?

  Read the article

• Could I have destroyed Partitioning-Scheme/Filesystem of HDDs with External Harddrive Case with builtin Raid-Controller?

  - by th3m3s

  I had just recently bought a Fantec QB-35US3R to have a nice box on my desk to make some backups to. Along with the HDD-Bay I had ordered some 4TB HDDs to let them run in Raid 5, which is handled by the hardware RAID controller of the Fantec HDD-Bay. The QB-35US3R arrived a few days before the hard drives, so I got impatient and had the idea to put three old 1TB disks in the Fantec device, just to test it... Long story short: I made a backup of the most important data on these three disks before they broke. I had set the configuration scheme to RAID 3 at the Fantec device. It seems, that the Fantec RAID controller has "somehow" destroyed the partitioning scheme or the file system, because when put into a HDD docking station, they get recognized by the OS (Ubuntu/Linux) but are not mountable anymore. I tried to recover the data from one HDD via gParted (parted), which ran some hours without success. Here I stopped, before trying other tools, cos I read that the longer a hard drive is running after a the partitioning got destroyed, the worse it gets. What could the HDD-Bay probably have done to my lovely hard drive disks? Is there some routine a RAID controller is executing, when it wants to create a RAID system? Like erasing the partition table (seems not plausible to me.) or writing some information to every hard drive in the RAID (seems more likely to me.)? Is there a chance to recover the data from these HDDs, or is the change a RAID controller makes so significant, that no software is of help?

  Read the article

• Sharing Windows 7 Hard drive with Windows XP Hard drive

  - by Ginzo Milani

  I wish to share my hard drives between my two computers but I seem to be running along some sort of error... my windows XP Computer is picking up my "XGaming" hard drive but when clicked it says access is denied, despite there is no password set up(I followed this: http://www.howtogeek.com/howto/windows-7/share-files-and-printers-between-windows-7-and-xp/) I also tried to share my C and J drives on my windows XP computer but my windows 7 computer doesn't seem to even detect them!

  Read the article

• What seems to be plaguing my hard drives?

  - by Craig

  In a little bit of a tech nightmare here. I know oodles about software, not so much more than the above average user about hardware. I recently had to toss an old desktop of mine. It was gradually getting slower and slower, and after shutting the desktop down for long periods of time, it would choke up upon startup. Sometimes it'd give a disk read error, sometimes say no OS was found, etc. Restarting it about 5-15 times would eventually boot properly. Weird. I also noticed that startup programs were going missing, Dropbox was reindexing my entire folder, and Backblaze was backing up less than the number of files that it should. This lead me to believe it was probably a hard drive issue. I began to wonder why I'd have hard drive issues, and came to closure when I assumed it was because of recent power surges and outages. I'm sure that does a number on the drive. I bought a new desktop recently. It's not a beast or anything, but it's enough for what I do. It's an eMachines (I know, I know) Ultra-Slim (http://www.amazon.com/eMachines-Ultra-Slim-ER1401-57-Desktop-PC/dp/B00475OG9U). This is ideal for me because it's small and portable. It comes with an AC adapter and battery, like a laptop. Just to be safe, I bought an uninterruptable power supply on top of that. It's basically protected completely from any outages that might scramble the drive. I set this up a few days ago and for the past few days I've been perfecting settings, downloading the usual applications, etc. Two days ago, I noticed Dropbox was reindexing my entire Dropbox folder. I installed both Dropbox and Backblaze on this system, but it is very much more lightweight than the other. Only about 15 third-party applications installed. I thought that maybe Dropbox and Backblaze were stressing my system, so I turned off Backblaze. Still, Dropbox runs and comes across this infinite reindex issue. I noticed that upon a reboot recently, two applications did not start on startup either. Also, much like my old desktop, every 3rd or 4th reboot, I'll be forced into a chkdsk. This makes me incredibly nervous. What could possibly be going wrong with my old, years-old desktop that is immediately causing the same issues to my new one? I've considered all of the basics. I'm in a very air conditioned room. I take run routine virus scans. I'd like to think I take care of my systems very well. What is this issue that is haunting me? There's always the possibility that this new desktop has a junk hard drive, but it just seems way too coincidental.

  Read the article

• WD My Passport Essential SmartWare External Hard Drive

  - by Acer

  Hi Ive been gifted a My Passport SmartWare External Hard Drive(500gb). I used it and it works fine and installed WDSmartWare The Second time i used it,still fine,but I took it out without using the "Safely Remove Hardware" So the third time I used it,there's a bubble come out that says: USB Device Not Recognized One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.For assistance in solving the problem, click this message. I tried connecting it to other USB Ports but it didn't work I tried Uninstalling WDSmarWare and connect it but it didn't work Please help me I like this hard drive so much and I spoilt it easily XD P.S I think about 13% has been used up in the Hard Drive P.S.S Other USBs can work fine in the computer P.S.S.S I tried connecting it to other computer and works fine OMG

  Read the article

• Fedora 11 System - Failed Hard Drive Removed, and Boot gets GRUB Hard Disk Error

  - by user38030

  Greetings, I have a machine with a 120GB ATA drive that has what I thought to be non-essential data on it. I also have a 320GB SATA hard drive with the OS/Application/Files (good data I want to keep). My 120GB ATA is failing I believe, as my computer kept slowing to a halt. However, when I move the drive from BIOS my computer will not start, says "GRUB Hard Disk Error". I know that my Fedora system has an LVM setup. I am looking to just remove the 120GB drive from "the mix", and just have one hard drive. How do I recover ? Thank you. I have access to a Linux Live CD right now and can make any changes. However, it won't boot into my OS - it fails.

  Read the article

• Macbook Pro Hard Drive won't shop up on disk startup

  - by Kristal

  I have a macbook pro from 2007. It came with an installation CD for 10.4.8. The first problem is that it won't even recognize the installation CD even though the CD seems perfectly fine. So I used another installation CD just to get me to the Disc Utility dialogue box. I went through the steps to erase the hard drive. However when I attempted to reboot the machine using Disc Startup there was no option for me to select the hard drive. Of course, since I don't have the appropriate installation disk in it won't let me install anything. What are my options? Do I need to ask Apple to send me a new installation CD for this computer? And why wouldn't the hard drive show up in the Startup options?

  Read the article

• How to stop S.M.A.R.T check running for external hard drive

  - by gotqn

  I am using Windows 7 and I have enabled my "S.M.A.R.T" check, too. I have bought an external 1 TB USB hard drive. When it is connected with my computer, it delays my machine initial start with about 4-5 minutes. I was very confused at the begging, then disable the "S.M.A.R.T" check and see that the computer runs normally after restart. So, here is what I want to know: Why the check is turn for the external disk? Is there a way to use the "S.M.A.R.T" check only for my main hard drive? Why it takes 4 to 5 minutes more, as my both hard drives - internal/external are 1 TB?

  Read the article

• Can a virus corrupt a hard disk?

  - by sundar

  Shorter version: Hard disk corrupt, vendor claims warranty does not apply since it was "due to a virus" and "problems due to software are not covered under the warranty". Longer version: My Dell laptop recently refused to boot, and all attempts to 'repair' the Vista installation using the provided installation CD failed. I called up Dell support, and a representative took the laptop and after a day said the hard disk is corrupt. When I tried to ask for a replacement under the warranty, an official replied that the corruption was due to a virus, and "problems due to software are not covered under the warranty". Now, I get a doubt that he's trying to avoid having to provide it under the warranty. Is it possible for a hard disk to get corrupt due to a virus? If yes, is there any way we can detect it was due to a virus (as he claims to have detected)?

  Read the article

• Replacing an ATA-100 hard drive

  - by Pieter

  I was instructed to replace the hard drive in an old laptop, a Dell Latitude D505. I'm suspecting that there was a head crash when someone moved the laptop while it was turned on. In the specifications, I found this about the hard drive: 30GB ATA-100; (4200RPM); 40GB ATA-100 (5400RPM); 60GB ATA-100 (4200RPM) *Optional 40GB (5400) 2nd HDD Module for media bay I'm familiar with SATA and IDE, but ATA-100 doesn't ring a bell. What do I have to take into account when I go look for a replacement hard drive?

  Read the article

• IOMEGA 500GB hard disk data reccovery

  - by Vineeth

  Last year by November I bought an IOMEGA 500GB Prestige hard disk. Yesterday, unfortunately the hard disk fell down from my table. After that incident, when I connect my disk, Windows asks me to format the disk to use, but I didn't format it yet. Actually, on that hard disk I have about 320GB of data. I tried all my possible ways to access my disk. I tried using DOS. It shows "data error (Cyclic redundancy check)". I have a 3 year warranty. Will I be covered under warranty if I report this issue to IOMEGA? Can I get my data back?

  Read the article

• Old hard drive file permissions still there

  - by blsub6

  I have a new hard drive, put Windows 7 on it and want to get all the files off of my old hard drive. I put in my old hard drive as a slave drive. I can see the files but when I try to move 'em, it tells me that I'm not the owner of the file. I try to take ownership of the file and it doesn't work (it doesn't tell me that I can't take ownership of it, it goes through, just gives me the same error when I try and open the file again). I've tried modding the permissions, no dice. Anything else I can try?

  Read the article

• TrueCrypt & upgrading your hard drive?

  - by Danielb

  I currently use TrueCrypt to encrypt the hard drive in a Win7 laptop (everything in a single partition). I am looking to upgrade the hard drive to a model with significantly more storage capacity. I've had a look through the documentation but I couldn't see anything about this particular scenario. I assume I need to do something like the following: Remove the encryption from the existing drive. Clone the existing drive image onto the new hard drive. Physically install the new drive into the laptop. Resize the single partition to use all the space in the new drive. Encrypt all of the new bigger drive with TrueCrypt.

  Read the article

• Disable or sleep secondary hard drive in Macbook

  - by cpak

  I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original hard drive to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the hard drive is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the hard drive when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it.

  Read the article

• Windows 7 Locks Up or Blue Screens after installing additional hard drive

  - by Ryan

  I've had my home theater pc for over a year now and it's been running with no problems what so ever. I got myself a new Seagate 2 TB hard drive for the holidays and ever since installing it the pc now randomly locks up or blue screens either upon putting it to sleep or waking it from sleep. The only thing I've tried so far is updating the firmware on the hard drive. The hard drive in question is this one (http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4846365). I do have my minidump file saved off on my home theater pc however right now I'm at work and don't have access to it. Please help! Thank you!

  Read the article

• Can't turn computer on after re-attaching hard drive

  - by julie

  I have an Eee PC 1008HA. A few days before I got a virus that was preventing the Windows to boot but I could turn the computer on. I opened (disassembled) the Eee PC, then disconnected the hard disk. I connected the hard disk to another computer and copied my files. When I connected again the hard disk to my Eee PC and closed (assembled) it , I cannot turn the Eee PC on. Even when I connect the wire for charging, neither the charging light nor any other lights light up.

  Read the article

• Dropped Dell XPS has hard-drive trouble

  - by Alex B.

  Yesterday, my mom dropped her laptop to the floor and got the blue screen of death after trying to boot the system. I was able to start a Fedora live CD and get some of her stuff off the hard drive, but I cannot seem to be able to install Windows on it. The installation starts loading files and then the computer turns off. I am thinking that she might need a new hard drive. Any ideas? Edit: I actually was able to boot the Windows XP installation but it is saying that no hard disk is detected. How can this be possible if I was able to mount the drive on fedora yesterday?

  Read the article

• Hard Drive Fundamentals And Verifying Disk Performance

  - by Agnel Kurian

  Over the past few months, my Windows XP machine has slowed down to a crawl. It takes about 10-15 minutes to go from power-up to reaching a responsive state. I have reasons to believe that this is a result of the hard disk slowing down. Questions: Do hard disks slow down as a result of mechanical wear and tear ...or age? How do I check if my disk has slowed down? Conversely, how can I verify that my disk is indeed running at the speed it's designed to run at? Could drivers be at fault here? Do hard disks come with drivers or does Windows use a generic driver?

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >