Search Results

Search found 11126 results on 446 pages for 'hardware requirements'.

Page 8/446 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • R in a netbook - system requirements for using R

    - by Brani
    I know it's not a programming question but I'm in a hurry to choose a netbook like this and I haven't been able to find the minimum system requirements for an R installation (e.g. minimum RAM). I am interested in a small netbook so as to be able to use it in class. Has anybody used R in a netbook that would recommend for that use?

    Read the article

  • CPU Usage at 100% with "Hardware Interrupts"

    - by eventualEntropy
    After turning on my desktop one day, I found that my CPU usage was maxed out at 100%, with 99% of that going to hardware "Interrupts". I tried to enable/disable all my devices one by one through the device manager, and found that I could get the CPU usage used by the Interrupts down to 50% by disabling all devices labelled "USB Host Controller" (except the ones for the mouse/keyboard). I found that I also got 10-20% more from disabling "High Definition Audio Controller". Following the tutorial at: http://www.msfn.org/board/topic/140263-how-to-get-the-cause-of-high-cpu-usage-by-dpc-interrupt/ Led me to similar conclusions (that is, that the culprit is mostly "USB Host Controller"): I've tried updating my asus motherboard driver and my video card driver. This is on Windows 7 64 bit. I've spent hours trying to figure this out and I'm running out of ideas short of formatting (which might still not fix it!).

    Read the article

  • Virtual server hardware to simulate 3-4 node web farm

    - by frankadelic
    I would like to get a dedicated server to run VMWare, VirtualBox, or similar. On this box, I would like to host 3-4 virtual instances of Linux, to act as nodes in a web farm. Performance is not that important, this would only be for testing and experimenting. I need something sub $1000 (including tax/shipping). Can someone recommend a pre-built server that would do the trick? I am pretty ignorant of hardware so building one is not going to work for me. Also, would I need multiple network cards to simulate a web farm or can the virtualization software handle that for me. Thanks

    Read the article

  • How to Diagnose a Pre-Operating System Load or Hardware Issue

    - by soandos
    How can I find out if my problem is hardware based? If it is, how can I figure out what component is to blame How can I fix other pre-operating system issues? As an aside, what are all of these components responsible for, and if they break, what can go wrong? (This question comes up frequently, and the suggested solutions are usually the same. This community wiki is an attempt to serve as the definitive, most comprehensive answer possible. Feel free to add your contributions via edits.)

    Read the article

  • Hardware asset management systems

    - by Dave
    I need to track a bunch of specialized testing tools, They are hardware devices used for testing other equipement. Each device has a serial number and is sent out for use in testing. Occasionally they break and have to be sent to the manufacture for repair. I'm looking for an open source application (preferably a webapp) to help manage them. Right now we're using Excel and it's not scaling as we get more tools. They aren't computers so all the standard IT asset management systems don't really fit the bill. I found h-harmony, but that project seems dead?

    Read the article

  • VirtualBox won't use any kind of hardware acceleration

    - by burnersk
    I see an problem with VirtualBox hardware acceleration functionality... My system configuration: MSI PH67A-C43 (B3) (BIOS: 2.70) Intel Core i5-2400 Windows 7 Professional SP1 64-bit Oracle VirtualBox 4.1.10 Oracle VirtualBox Extension Pack 4.1.10 I can select the individual acceleration options such as PAE/NX, VT-x/VMD-V or Nested Paging within VM-Settings but if I start the VM the accelerations will be disabled as of the tooltip from CPU (right next to shared folders). Each acceleration is "Disabled". Does this sounds familar to anybody? How can I solve this?

    Read the article

  • Rules to choose hardware for OLTP systems (sql server)

    - by Roman Pokrovskij
    Ok. We know database size, number of concurrent users, number of transactions per minute; should choose number of processors, RAID, RAM, mirroring and clustering. There are no exact rule.. but may be there are no rules at all? In my practice in every case I have "legacy" system, and after some inspections and interview I can form an opinion how hardware and design can be improved. But every time when I meet "absolutely" new system (I guess there are no new systems, but sometimes are such tasks) I can't say anything trustful. So I'm interesting how people deal with such tasks? They map task on theirs experience or have some base formulas?

    Read the article

  • Server 2008 R2 Datacenter (and all other version) not detecting hardware

    - by Mitchell Skurnik
    I upgraded my ASUS KFN32-D SLI/SAS motherboard to the latest BIOS version and swapped out the 2 dual-core procs with 2 quad core procs. After installing Server 2008 Datacenter onto the system I noticed that it was not connected to the network. I open device manager and see no network adapters. I have to go up to View - Show hidden devices to even see the virtual WAN Miniport adapters. This problem happens in Vista and Windows 7 (all x64). What is even stranger is it all works in x86 mode. What in x64 could be causing windows to not even detect hardware that works in x86? Is the boot manager possibly the culprit?

    Read the article

  • Windows 2008 Server on VMWare (hardware)

    - by Bill
    I want to setup a single server to run a few virtual servers for our datacenter. I do not have a lot of money to spend so I am trying to gain bang for the buck. My budget is around $2,000. So I was thinking about building the following as the VMWare physical server: Intel iCore 7 950 (LGA1366, 4 cores,8 threads) Gigabyte GA-X58-USB3 LGA 1366 X58 ATX Intel Motherboard 24 GB of Viper II Series, Sector 7 Edition, Extreme Performance DDR3-1600 (PC3-12800) CL9 Triple Channel Memory VelociRaptor 300GB 10,000 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive I am planning on running the newest version of VMWare ESXi (64-bit). On these I am planning on running a few various servers: Windows 2008 Server R2 w/ IIS (several custom built ASP.NET Apps) Windows 2008 Server R2 w/ MS SQL 2008 Database Server Linux Web Server w/ Several WordPress Blogs (XAMPP?) Windows 2008 Server R2 w/ IIS (DEV ENVIRONMENT) Windows 2008 Server R2 w/ MS SQL 2008 Database Server (DEV ENVIRONMENT) In your opinion, will this hardware be sufficient to run the above load with room for possible 2-3 more virtual machines (probably lightweight web servers)?

    Read the article

  • Hardware specs for web cache

    - by Raj
    I am looking for recommendations for hardware specs for a server that needs to be a web cache for a user population of about 2,000 concurrent connections. The clients are viewing segmented HTTP video in bitrates ranging from 150kbps to 2mbps. Most video is "live" meaning segments of 2-10 secs each, of which 100 or so are maintained at a time. There are also some pre-recorded fixed length videos. How would I go about doing the provisioning calculation for such a server: What kind of HDD (SSD?), how many NICs how much RAM etc? I am thinking of using Varnish on Linux, all the RAM I can get my hands on, 2 CPUs with 6-8 cores each.

    Read the article

  • Does programmable hardware exist to allow hardware to be programmed by computers?

    - by agentbanks217
    I am a programmer and I have never really dealt with the hardware of anything, only software. I want to start building things that I can control from my computer using programming. My question is are there such devices on the market that have a programmable interface or API? For example, I want to build a automated window blinds opening/closing device, and I would like to be able to control it from my computer e.g. writing an app or some code to schedule them when to open and close. I would like to know if there are any devices that can be programmed to do that (the computer part)? Thanks!

    Read the article

  • Getting Requirements Right

    - by Tim Murphy
    Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/10/28/getting-requirements-right.aspxI had a meeting with a stakeholder who stated “I bet you wish I wasn’t in these meetings”.  She said this because she kept changing what we thought the end product should look like.  My reply was that it would be much worse if she came in at the end of the project and told us we had just built the wrong solution. You have to take the time to get the requirements right.  Be honest with all involved parties as to the amount of time it is taking to refine the requirements.  The only thing worse than wrong requirements is a surprise in budget overages.  If you give open visibility to your progress then management has the ability to shift priorities if needed. In order to capture the best requirements use different approaches to help your stakeholders to articulate their needs.  Use mock ups and matrix spread sheets to allow them to visualize and confirm that everyone has the same understanding.  The goals isn’t to record every last detail, but to have the major landmarks identified so there are fewer surprises along the way. Help the team members to understand that you all have the same goal.  You want to create the best possible solution for the given business problem.  If you do this everyone involved will do there best to outline a picture of what is to be built and you will be able to design an appropriate solution to fill those needs more easily. Technorati Tags: requirements gathering,PSC Group,PSC

    Read the article

  • Metadata requirements for developers

    - by Paul James
    I'm tasked with providing a list of metadata requirements our data warehouse developers might need. This is not the business metadata (nice descriptions etc), but rather data required for change management (also known as impact assesment), data lineage etc. I've seen this article Meta Meta Data Data - Ralph Kimball but as I'm not the first person to do this I'm throwing it to the SO community. The actual question is this: What metadata do datawarehouse developers require to design, develop and manage change in ETL routines? PS: I'm trying to keep the answer platform agnostic but for context this is an Oracle database with PL/SQL and Datastage.

    Read the article

  • ext4 filesystem corruption -- maybe hardware error?

    - by pts
    I'm getting these errors in dmesg after about half an hour after I turn on the computer: [ 1355.677957] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1318420: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251700offset=0(0), inode=1802725748, rec_len=179136, name_len=32 [ 1355.677973] Aborting journal on device sda2-8. [ 1355.678101] EXT4-fs (sda2): Remounting filesystem read-only [ 1355.690144] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1318416: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251699offset=0(0), inode=2194783952, rec_len=53280, name_len=152 [ 1356.864720] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1312795: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251176offset=1460(13748), inode=1432317541, rec_len=208208, name_len=119 /dev/sda is an SSD, and it's using the noop scheduler. /etc/fstab entry: UUID=acb4eefa-48ff-4ee1-bb5f-2dccce7d011f / ext4 errors=remount-ro,noatime,discard,user_xattr 0 1 System information: $ cat /proc/mounts | grep /dev/sd /dev/sda1 /boot ext2 rw,noatime,errors=continue 0 0 $ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.04 DISTRIB_CODENAME=lucid DISTRIB_DESCRIPTION="Ubuntu 10.04.3 LTS" $ uname -a Linux leetpad 2.6.35-30-generic-pae #61~lucid1-Ubuntu SMP Thu Oct 13 21:14:29 UTC 2011 i686 GNU/Linux I've run memtest for 7 hours, it didn't found any memory errors. Any obvious ideas what can go wrong in this case? The most reasonable thing I can imagine is that the SSD is silently dropping some write requests, which eventually leads to an EXT4 filesystem inconsistency (but no disk I/O errors). How can this happen? Is there a relevant configuration option I should ensure to be set correctly? What tools should I use to diagnose the hardware failures? Would it be possible to diagnose the SSD failure without overwriting data?

    Read the article

  • linux hardware raid 10 / lvm / virtual machine partition alignment and filesystem optimization

    - by Jason Ward
    I've been reading everything I can find about partition alignment and filesystem optimization (ext4 and xfs) but still don't know enough to be confident in setting up my current configuration. My remaining confusion comes from the LVM layer and if I should use raid parameters on the filesystem in guest os'es. My main questions are: When I use 'pvcreate --dataalignment' do I use the stripe-width as calculated for a filesystem on RAID (128kB for ext4 in my situation), the Stripe size of the RAID set (256kB), something else altogether, or do I not need this? When I create ext2/3/4 or xfs filesystems in guests on the Logical Volumes, should I add the settings for the underlying RAID (e.g. mkfs.ext4 -b 4096 -E stride=64,stripe-width=128)? Does anyone see any glaring errors in my set up below? I'm running some benchmarks now but haven't done enough to start comparing results. I have four drives in RAID 10 on a 3ware 9750-4i controller (more details on the settings below) giving me a 6.0TB device at /dev/sda. Here is my partition table: Model: LSI 9750-4i DISK (scsi) Disk /dev/sda: 5722024MiB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1.00MiB 257MiB 256MiB ext4 BOOTPART boot 2 257MiB 4353MiB 4096MiB linux-swap(v1) 3 4353MiB 266497MiB 262144MiB ext4 4 266497MiB 4460801MiB 4194304MiB Partition 1 is to be the /boot partition for my xen host. Partition 2 is swap. Partition 3 is to be the root (/) for my xen host. Partition 4 is to be (the only) physical volume to be used by LVM (for those who are counting, I left about 1.2TB unallocated for now) For my Xen guests, I usually create a Logical Volume of the needed size and present it to the guests for them to partition as needed. I know there are other ways of handling that but this method works best for my situation. Here's the hardware of interest on my CentOS 6.3 Xen Host: 4x Seagate Barracuda 3TB ST3000DM001 Drives (sector size: 512 logical/4096 physical) 3ware 9750-4i w/BBU (sector size reported: 512 logical/512 physical) All four drives make up a RAID 10 array. Stripe: 256kB Write Cache enabled Read Cache: intelligent StoreSave: Balance Thanks!

    Read the article

  • Screen Flickering: Hardware or Software?

    - by Wesley
    I have a Samsung N120 netbook (upgraded to 2GB DDR2 RAM) and there has been a screen flickering issue for some time now. However, I have not been able to accurately determine whether it is a software or hardware issue. Here are some of the symptoms: The flicker is white-colored and shows up as vertical lines. Flickering or not, there may be occasionally some random blue patterns (no image distortion) The screen tends to flicker more when the screen is not tilted back all the way. When tilting the screen back and forth, the screen will usually flicker. Some images on the screen may randomly distort without full-on flickering. The screen will flicker only on certain websites, but not on others. A certain part of a webpage may constantly be distorted randomly, even when scrolling. While flickering, the mouse will not move though I'm moving my finger along the touchpad. A connected external monitor does not have any problems. The flickering is completely random and does not seem to follow any CPU/GPU usage trends. Flickering usually gets worse when the screen brightness is turned higher. There will be flickering on battery and while plugged in. Search up "Samsung N120 - Screen Flickering" on YouTube for an idea of what the flickering looks like. However, there is no visible distortions and the flickering seems to stop when the screen has dimmed. Since the problems started, I tried formatting and using Windows 7, then formatted again and went back to Windows XP. The screen was also replaced sometime during this past summer. The uninstallation of the Samsung Battery Manager (on the original install of XP) seemed to reduce the flicker partially, but eventually got worse. So, what could possibly be the problem?

    Read the article

  • Piecing together low-powered hardware for an RS-232 terminal server

    - by Fred
    I'm working on reconstructing my Cisco lab for training/educational purposes and I found that the actual terminal server I have is dead. I have a couple of 8-port PCI serial cards which would be more than ample for my lab, but I don't want to leave my personal computer running to be able to access the console ports. Ideally I would access the terminal server remotely, either by SSH/RDP to the box (depending on what OS I go with) or by installing a software package that allows me to telnet directly to a serial port. I know I've found a program that does this under Linux in the past but its name escapes me at the moment. I'm thinking about scavenging for some old hardware, on eBay or something, to put together a low-powered PC. Needs to be something that: Has Low-power consumption Has at least 2 PCI slots (though I certainly wouldn't complain about having more) Has onboard Ethernet (or, if not, another PCI or ISA slot (not shared)) Can be headless once an OS installed (probably Linux) I'm currently leaning towards an old fashioned Pentium (sub-133MHz era) but I am wondering if anybody else knows of another platform/mobo that would suit these needs. Alternatively, I've been considering buying a Raspberry Pi and a big USB hub along with a bunch of USB-Serial adapters but this sounds like it'd get messy quick with cables and adapters all over the place, and I may not even have the same ttyS#'s between boots.

    Read the article

  • Inexpensive (used) hardware for Xen virtualization test?

    - by Jason Antman
    Virtualization is one of the areas where I could really use some experience. I also run quite a few services (web, mail, dns, etc.) out of my home. Since most of my hardware is getting a bit old (I'm running on stuff that was surplused years ago...) I decided that it's about time I start renewing some things, and also play around with virtualization a bit more. My plan is to setup a SAN box (simple iSCSI target, relatively inexpensive gigE switch), get a pair (for starters) of new servers, and start building some new stuff with Xen, specifically planning on playing with live migration and full virtualization. Does anyone have recommendations for used, older "servers" (really anything in a rack-mount form factor, I'm not too worried about things like iLO/iLOM for the test nodes) that support VT-x/AMD-V? I'm biased to HP, but it looks like they didn't make Proliants with VT-x/Vanderpool processors until G6 (for the DL360) or so, which is way out of my price range. I'm looking in the sub-$300 range (or less, if possible), used, probably Ebay. Any recommendations are greatly appreciated. Edit:And, to catch this before the comments start coming - these are personal systems. I have first-generation Proliants still in use (I got them as corporate surplus in 05, they've been running since then, and probably were running since 01 or 02 prior to being sold). I don't need anything shiny and new - I've got a bunch of old boxes, at least one complete replacement for every model in use, and that's fine for me (and easy on the wallet).

    Read the article

  • How to use Hardware RAID in Ubuntu Server

    - by user2071938
    I have an Adaptec RAID-Controller and created an RAID-1(Mirroring) succesfully. Now I have installed Ubuntu Server 12.04.3. When I type fdisk -l I get this output: bf@fileserver:~$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/sdc: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004c454 Device Boot Start End Blocks Id System /dev/sdc1 * 2048 499711 248832 83 Linux /dev/sdc2 501758 156301311 77899777 5 Extended /dev/sdc5 501760 156301311 77899776 8e Linux LVM Disk /dev/mapper/fileserver--vg-root: 75.6 GB, 75606523904 bytes 255 heads, 63 sectors/track, 9191 cylinders, total 147668992 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/fileserver--vg-root doesn't contain a valid partition table Disk /dev/mapper/ddf1_Data: 1000.1 GB, 1000065728512 bytes 255 heads, 63 sectors/track, 121584 cylinders, total 1953253376 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/mapper/ddf1_Data doesn't contain a valid partition table Disk /dev/mapper/fileserver--vg-swap_1: 4160 MB, 4160749568 bytes 255 heads, 63 sectors/track, 505 cylinders, total 8126464 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/fileserver--vg-swap_1 doesn't contain a valid partition table The 80 GB HDD is for the System The 1000.2 GB HDD should be for my data. But I'm a bit confused becauser there are listed two 1000.2 GB HDDs, due the Hardware RAID shoudln't there be only one HDD vissible to the OS? (I have two 1000.2 GB HDDs in an Raid-1 Array) dmraid gives me bf@fileserver:~$ sudo dmraid -r /dev/sdb: ddf1, ".ddf1_disks", GROUP, ok, 1953253376 sectors, data@ 0 /dev/sda: ddf1, ".ddf1_disks", GROUP, ok, 1953253376 sectors, data@ 0 so It seems to be ok? But how do I partitionate this disks and which one should I mount(sdb or sda?) Hope you can help me thx Florian

    Read the article

  • IBM Keynote: (hardware,software)–>{IBM.java.patterns}

    - by Janice J. Heiss
    On Sunday evening, September 30, 2012, Jason McGee, IBM Distinguished Engineer and Chief Architect Cloud Computing, along with John Duimovich IBM Distinguished Engineer and Java CTO, gave an information- and idea-rich keynote that left Java developers with much to ponder.Their focus was on the challenges to make Java more efficient and productive given the hardware and software environments of 2012. “One idea that is very interesting is the idea of multi-tenancy,” said McGee, “and how we can move up the spectrum. In traditional systems, we ran applications on dedicated middleware, operating systems and hardware. A lot of customers still run that way. Now people introduce hardware virtualization and share the hardware. That is good but there is a lot more we can do. We can share middleware and the application itself.” McGee challenged developers to better enable the Java language to function in these higher density models. He spoke about the need to describe patterns that help us grasp the full environment that an application needs, whether it’s a web or full enterprise application. Developers need to understand the resources that an application interacts with in a way that is simple and straightforward. The task is to then automate that deployment so that the complexity of infrastructure can be by-passed and developers can live in a simpler world where the cloud can automatically configure the needed environment. McGee argued that the key, something IBM has been working on, is to use a simpler pattern that allows a cloud-based architecture to embrace the entire infrastructure required for an application and make it highly available, scalable and able to recover from failure. The cloud-based architecture would automate the complexity of setting up and managing the infrastructure. IBM has been trying to realize this vision for customers so they can describe their Java application environment simply and allow the cloud to automate the deployment and management of applications. “The point,” explained McGee, “is to package the executable used to describe applications, to drop it into a shared system and let that system provide some intelligence about how to deploy and manage those applications.”John Duimovich on Improvements in JavaMcGee then brought onstage IBM’s Distinguished Engineer and CTO for Java, John Duimovich, who showed the audience ways to deploy Java applications more efficiently.Duimovich explained that, “When you run lots of copies of Java in the cloud or any hypervisor virtualized system, there are a lot of duplications of code and jar files. IBM has a facility called ‘shared classes’ where we put shared code, read only artefacts in a cache that is sharable across hypervisors.” By putting JIT code in ahead of time, he explained that the application server will use 20% less memory and operate 30% faster.  He described another example of how the JVM allows for the maximum amount of sharing that manages the tenants and file sockets and memory use through throttling and control. Duimovich touched on the “thin is in” model and IBM’s Liberty Profile and lightweight runtime for the cloud, which allows for greater efficiency in interacting with the cloud.Duimovich discussed the confusion Java developers experience when, for example, the hypervisor tells them that that they have 8 and then 4 and then 16 cores. “Because hypervisors are virtualized, they can change based on resource needs across the hypervisor layer. You may have 10 instances of an operation system and you may need to reallocate memory, " explained Duimovich.  He showed how to resize LPARs, reallocate CPUs and migrate applications as needed. He explained how application servers can resize thread pools and better use resources based on information from the hypervisors.Java Challenges in Hardware and SoftwareMcGee ended the keynote with a summary of upcoming hardware and software challenges for the Java platform. He noted that one reason developers love Java is it allows them to ignore differences in hardware. He stated that the most important things happening in hardware were in network and storage – in developments such as the speed of SSD, the exploitation of high-speed, low-latency networking, and recent developments such as storage-class memory, and non-volatile main memory. “So we are challenged to maintain the benefits of Java and the abstraction it provides from hardware while still exploiting the new innovations in hardware,” said McGee.McGee discussed transactional messaging applications where developers send messages transactionally persist a message to storage, something traditionally done by backing messages on spinning disks, something mostly outdated. “Now,” he pointed out, “we would use SSD and store it in Flash and get 70,000 messages a second. If we stored it using a PCI express-based flash memory device, it is still Flash but put on a PCI express bus on a card closer to the CPU. This way I get 300,000 messages a second and 25% improvement in latency.” McGee’s central point was that hardware has a huge impact on the performance and scalability of applications. New technologies are enabling developers to build classes of Java applications previously unheard of. “We need to be able to balance these things in Java – we need to maintain the abstraction but also be able to exploit the evolution of hardware technology,” said McGee. According to McGee, IBM's current focus is on systems wherein hardware and software are shipped together in what are called Expert Integrated Systems – systems that are pre-optimized, and pre-integrated together. McGee closed IBM’s engaging and thought-provoking keynote by pointing out that the use of Java in complex applications is increasingly being augmented by a host of other languages with strong communities around them – JavaScript, JRuby, Scala, Python and so forth. Java developers now must understand the strengths and weaknesses of such newcomers as applications increasingly involve a complex interconnection of languages.

    Read the article

  • Minimum specs needed to run 1080p HD movies?

    - by Wesley
    Hi all, I was wondering how low you could go with hardware that would still be able to smoothly run HD movies. My current plan is around $215 CAD w/o a hard drive: Intel Pentium 4 @ 3.2 GHz - 1GB DDR/SDRAM - 512MB X1600 Pro AGP - 350W PSU - ECS P4VXASD2+ - Bluray/DVD-RW drive. As for the hard drive, could I just get a 7200RPM IDE HDD? Also, I'm planning on installing XP Pro SP3, unless Ubuntu somehow has an advantage. I'm not wanting this to be a media center only computer... just want it to be a normal computer with just enough oomph to play HD movies. Thanks in advance. EDIT1: Forgot to mention that the Bluray/DVD-RW drive is SATA, but I was planning on getting an SATA-IDE adapter or a PCI card with SATA. EDIT2: Oh yes... if I get a PCI card with SATA, would you then recommend I use an SATA hard drive as well? That would leave all the IDE ports on the motherboard unused... is that a good idea?

    Read the article

  • Maintaining traceability up-to-date as project evolves

    - by Catalin Piti?
    During various projects, I needed to make sure that the use case model I developed during the analysis phase is covering the requirements of the project. For that, I was able to have some degree of traceability between requirement statements (uniquely identified) and use cases (also uniquely identified). In some cases, enabling traceability implied some additional effort that I considered (and later proved) to be a good investment. Now, the biggest problem I faced was to maintain this traceability later, when things started to change (as a result of change requests, or as a result of use case changes). Any ideas of best practices for traceability maintenance? (It can apply to other items in the project - e.g. use cases and test cases, or requirements and acceptance test cases) Later edit Tools might help, but they can't detect gaps or errors in traceability. Navigation... maybe, but no warranty that the traceability is up-to-date or correct after applying the changes.

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >