Search Results

Search found 9462 results on 379 pages for 'laptop repair'.

Page 8/379 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • Best usage for a laptop being used as a desktop without removable batteries

    - by Senseful
    After reading the information on http://batteryuniversity.com, I realize that one of the best ways to permanently damage a lithium ion battery is to use the battery at a high temperature while it's fully charged. This is exactly what happens when you use the computer as if it were a desktop computer, since leaving it plugged in will keep the battery at 100% and using the computer will heat up the battery. This is why it's recommend to remove the battery from your laptop if you are using it is this scenario. My question is what would you do if the laptop doesn't have removable batteries (e.g. a MacBook Pro)? Should I use some kind of charge cycle such as: charge to 80%, unplug the power chord, use the laptop until it reaches 20%, then repeat the cycle by charging to 80% again? If so, which values should I use instead of 80% and 20%? (I think charging to 80% is better than 100% because of the damage that a hot battery at 100% can do, but I just made the figure 80% up, and I'm sure there's a better number to strive for which is backed by science.) I've read many of the articles on batteryuniversity.com, but couldn't find anything pertaining to this. Update: What about doing something like charge (or discharge) it to 50%, then plug it in and turn on settings which use the battery as much as possible (e.g. brightness all the way up, wi-fi on, etc.), in order to try to maintain the battery at 50% (i.e. the rate it is charging is the same as it is discharging). This will probably heat up the battery, but would make it so you don't need to constantly plug and unplug the laptop. The one bad thing is that you are taking up more charge cycles which would decrease the battery life, thus I'm not sure this is a good idea.

    Read the article

  • Laptop Overheating with Windows 8

    - by Dany Khalife
    I recently installed Windows 8 on my HP G62 Laptop and i have been noticing a very strange problem with it. Let alone, for lets say 5 minutes, without even touching it, it starts to heat up and it reaches about 60 degrees (Celsius) with absolutely no applications open (not just on desktop but overall). I dug in a little deep and found out that Maintenance was running when the computer was Idle, so i turned that off From the System's Task Scheduler, and while there i also turned off other services i did not need hoping that would solve the problem. So after a few days, i noticed that the average temperature of my laptop dropped from 55 to 48 degrees while working on Visual Studio. And when i thought the problem had disappeared, it still did show up, only not after 5 minutes, but more like 10 minutes... Here is what i have done so far: Replacing the thermal paste on the CPU and the fan and cleaning the fan (this was like 6 months ago) Using a laptop cooler Running a virus scan (i just formatted my laptop so it would be really weird if i already caught something but who knows) Right now, i believe it has something to do with my gfx driver (Even though it IS up to date, looking closely at the screen, i can see the pixels slowly refresh (kinda like watching static on TV) which i wasn't able to do on Windows 7. If you have any ideas, let me know. Thanks

    Read the article

  • Connecting a laptop to a TV via HDMI

    - by Madmartigan
    I just bought a new Dell XPS17 laptop (Win7) that only has HDMI output. My last 2 laptops had VGA, which I used to connect to my Sony Bravia 32" TV with no issues, but with the HDMI it's been quite a headache. Drivers for display adapters have been updated to the latest versions: Intel(R) HD Graphics Family NVIDIA GeForce GT 550M I went to a store and plugged in to 4 different TVs from different manufacturers. A sales rep and I spent about 30 minutes being baffled by the results (which are the same as my current TV): Extreme buggy behavior in the Nvidia and Windows display/resolution control panel Can not extend or duplicate displays, can only select one Third and fourth output devices "randomly" detected by the Windows control panel Could not get the screen to fit the output (edges cut off on all sides by about a half inch) Resolution and colors less than perfect. Artifacts around text. Display "randomly" cuts out Defaults to TV output only when plugged in Can not change resolution on either device when connected No audio from the TV Plugged in to 3 monitors from different manufacturers: Defaults to duplicated displays when plugged in Everything works perfectly So far, four people have gone through all the settings in the latop with no luck. I had similar, but not exactly matching results with a different laptop. I'm using the Sony Bravia currently at home, but in order to get it to work I have to turn on the laptop, wait until the display shows up on it, close the lid, then cycle through each output channel on the TV until I come back around to the HDMI port again, but still I have the symptoms described above. However: Once in a while, it just works. Sometimes, seemingly randomly, the output fits the screen perfectly. Sometimes the audio comes through the speakers too, but not always. Usually my screen saver "Mystify" will come up with a message that it cannot be displayed due to a limitation of the video card, but then sometimes it works fine. These 3 things seem to be independent of each other and don't always happen together. So, is there any way to get the laptop to output correctly to a TV, or is it just not meant to be?

    Read the article

  • Access Creates new file every time I Compact & Repair

    - by NickSentowski
    It didn't always do this, but ever since I split my database and made the front-end an ACCDE file, any time I try to compact and repair either file, a new file called "Database 1" is generated and my original file size doesn't change. Is this normal? My ACCDB is roughly 20MB, and my ACCDE is just over 1M after being used the first time. Before opening, the ACCDE was only 600k (I have lots of forms and queries, and regularly store PDF attachments.

    Read the article

  • dell server display on laptop screen

    - by hari
    Please redirect if this is not (and probably thats true) the correct forum/site. I have a dell server and I am trying to configure it for the first time. It is running windows server 2003. I do not have a monitor screen. Can I use laptop screen to display dell server and set it up? I mean to say is, if I can display dell server on laptop screen, it would be great. I am trying that with a dell laptop but not getting the display. Any help/pointer would be appreciated. Thanks in advance.

    Read the article

  • Toshiba Satellite laptop connected to HDTV

    - by VANJ
    I have a Toshiba Satellite A505-S6014 laptop running Windows 7 64-bit connected to a Toshiba Regza 42" HDTV with an HDMI cable. The laptop has a 16" display and the screen resolution is set to the maximum/recommended of 1366x768. The display output is set to "LCD+HDMI". The display looks fine on the laptop screen but on the TV it is not a "full screen" display, it leaves a good 3" black border all around all 4 edges. When I switch the display to "HDMI only", it is now too big for the TV screen and some of my desktop icons are no longer visible off to the side. What is the best way to set this up? I guess that since a 16" and 42" displays have different native resolutions, a LCD+HDMI mode is defaulting to the optimal size for the 16". But when I set it to HDMI Only, what is the appropriate resolution for a 42" full screen display? Thanks

    Read the article

  • Very poor battery life on Lenovo ThinkPad W500 laptop

    - by Matt
    I have a new ThinkPad W500 laptop (w/ 9 cell battery) running Windows 7 RTM 64-bit. All drivers* and BIOS are the latest. Battery life appeared poor so I performed several tests under the following conditions: Battery starts with 100% charge Screen on minimum brightness Screen saver running Wifi n enabled and active "Normal" set of programs running including Outlook 2007, FeedDemon, TweetDeck and antivirus Laptop left untouched during tests Under the above conditions, I clocked under 2 hours of battery life across 3 tests (1:49, 1:52, 1:47). If I actually use the computer, we're looking at 1:30. Something is not right... The smoking gun here is that Lenovo hasn't officially released Windows 7 drivers for this laptop. I haven't tried with Vista or XP yet. What are others seeing? Update: For W500 owners w/ the 9 cell battery, what value do you see for "Full charge capacity" when on the Battery tab of the Power Manager utility? I see 81.87 Wh.

    Read the article

  • Laptop HDD failure imminent?

    - by Andrei Rinea
    I have an HP Compaq 615 laptop with an 160 GB 7200 rpm HDD. Hasn't been dropped or shaken, in fact it almost always stayed on my desk. I've treated it as nice as I could. The other day, however, my OS froze and I could hear a repeated clink-clink-clink coming from the HDD zone of the laptop. I had to switch off hardware-ly the laptop and re-start it. It worked very well after, including now. However I backed up immediately the core data on my USB drive and ordered an external USB HDD for periodic backups. Will it die soon or it was just a "blip"?

    Read the article

  • Fullscreen Video stutters on second monitor laptop

    - by nobrandheroes
    Fullscreen video on my new 1080p monitor is choppy when it comes from my laptop. The same video plays when not full screen. This goes for all video(Flash/MKV, etc), regardless of video resolution. I have an ATI Mobility Radeon HD 4200 Series card in my Thinkpad Edge, Turion X2 2GHz. The computer plays 1080p fine. Things I've tried: Updating Drivers Switching cables Turning Hardware Acceleration Changing video players process priority Rebooting Turning of laptop screen Turning off unused processes Nothing Works. What is the likelyhood that my laptop cannot power a 1920x1280 display?

    Read the article

  • Connect three computers (including one laptop) to one monitor

    - by Jesse Beder
    I have the following hardware: 2 Desktop PCs, running Windows XP and Ubuntu Macbook Pro a LCD monitor, a wired keyboard, and a wired mouse Currently, I'm using an oldish IOGear KVM switch to connect the two PCs to the input/output (and it works very well). I'd like a setup that includes the laptop as well, ideally maintaining as much portability as possible (meaning I'd like to be able to sit down, easily plug in my laptop, work on all computers, then easily pick up and leave with the laptop - is docking station the right word here?). What hardware do I need to do this?

    Read the article

  • HP dv9000 Vista laptop won't boot from CD/DVD drive

    - by scottedwards2000
    My HP dv9000 Vista laptop recently got the BSOD with error 0x0000c1f5. The only way to fix this error is to be able to boot from CD/DVD and use some repair software I have. The problem is that the laptop REFUSES to boot from any CD/DVD I try. I've changed the boot order so the CD/DVD is first, and I can hear the drive spin up a bit upon power-up, but after a second, it spins down and then the laptop tries to boot from hard drive. Any ideas? (I've tried lots of CDs so it's not the media itself) Thanks much!

    Read the article

  • Laptop and 2 screens: use screens but not monitor display

    - by ClarkeyBoy
    Hi, I have 1 VGA socket on my laptop, and currently have that in use by a large screen. At some point in the future I would like to get another one of these screens and use both screens in dual screen mode but not use my laptop display (to be honest my laptop display is pretty rubbish as its like 2/3s the size of my screen - even if I had the choice to use all 3 I probably wouldn't want to). Is it possible to achieve this? If so, what do I need by way of hardware / software, and how much do you reckon it should cost me? Thanks in advance. Regards, Richard

    Read the article

  • Connect laptop to mobile wifi

    - by Arnab Sen Gupta
    I have a nokia N97. In my apartment there's a wifi network that we all use to connect to the internet. But for the past few days my laptop is not able to find the network..Initially I thought it was a problem of the network,but hen I found out that others were able to use it..My vista os laptop is able to detect other available networks but not the required one..Then i tried to connect my cell phone to the network and it did easily!! I tried restoring the network settings to default but it showed the network for just 2 mins and it ws back to square one.. I wanted to know can I connect my laptop to the cell using USB and browse internet through that?? I have done it when I used GPRS but am not sure if it cn be done in this situation when the cell is connected toa wifi network..plz help..

    Read the article

  • Converting a Full HD Inspiron 9400 laptop LCD to a standalone monitor

    - by jhaukur
    Has anyone tried converting a LCD laptop monitor (17" full HD in this instance) to a stand-alone monitor? Are there any converters that one can buy to send DVI or VGA signals to the plug that is used to connect said LCD to the laptop motherboard? My laptop is the infamous Dell Inspiron 9400 (1705) model. They can have awesome monitors but if you check out ebay, there are many there for sale for little to nothing since the graphic cards fault unsually often in those machines. I'd like to be able to use the LCD and just scrap the rest.

    Read the article

  • Laptop not charging when connected to mains outlet

    - by Josh
    I've had this laptop for a few weeks now, it's a Sony Vaio. I went to charge it a few days ago and plugged in the power cable, but it's not charging. The battery icon in the Windows taskbar to the bottom right says it's plugged in and charging, but the charge level never goes above 2%. I have checked and I don't have a hcarging switch on the laptop anywhere, so it should be charging. If I unplug the cable, the laptop runs out of power within 30 seconds or so, further fueling my thought that it's a faulty battery. Anyone have any bright ideas? If this doesn't get fixed I'll just ring up Sony and get them to send me a replacement battery or something. Thanks.

    Read the article

  • Finding a laptop to fit my spec's

    - by Mick
    I have a small list of characteristics that are required for a new laptop and have been looking for websites where I can specify my requirements and see which laptops fit the bill. I want to specify OS/RAM/HDD size/CD drive/screen resolution/battery life. I have found several sites so far where I can specify everything except battery life. Does such a site exist? I know that this is not a shopping site - but before any moderator rushes to close this question - please note that I am not asking "where do I buy this laptop" - merely what laptop fits this specs. I don't even care what country the website is based in.

    Read the article

  • Laptop VGA Out Stopped Working

    - by Jack7890
    I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

    Read the article

  • Laptop VGA Output Stopped Working

    - by Jack7890
    I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

    Read the article

  • Disable CD eject button on Windows laptop

    - by Marc Gravell
    Most laptops have a CD eject that is very sensitive, and placed such that it regularly gets triggered when handling the laptop. This is in particular a problem (for clumsy-handed me) when picking up the laptop to stow in in a laptop bag; I've lost count of the number of times it has ejected just as I am lowering it into the case! I rarely use a CD, but I am wondering whether some crafty software hack (or other trick) might be possible to make it less vulnerable. Perhaps trying to fool it into thinking it is busy (but ideally without destroying my battery). Otherwise, I might as well bow to the inevitable and snap the darned thing off. I'm not making this brand-specific, as I've seen this problem on a range of both branded and re-badged laptops. I am, however, mainly interested in windows-friendly solutions.

    Read the article

  • Laptop touchpad works incorrect when on power supply

    - by Ikke
    My original laptop adapter broke down, so I've baught a new one. It's a no-brand adapter from a dutch internet shop. The power of the new adapter is slightly more than the old adapter, but in my opinion that shouldn't be a problem. The laptop is a Toshiba Sattelite L40-15B. When the old adapter broke down due to short circuit, this laptop was connected. When the adapter is unplugged, the touchpad works correctly and smoothly. But as soon as it is connected, the cursor moves jumpy, and response badly. Does anyone know where this problem comes from, and if there's a solution?

    Read the article

  • Brightness too dark or too bright

    - by YatharthROCK
    Basically, below a seemingly-arbitrary threshold (seems to be around 60%) my laptop screen is too dark to really make out much, and above that threshold it takes its maximum brightness (which is waay too bright for my eyes). This problem only occurs when I change the brightness using Windows' UI. Changing the brightness using Fn keys on my keyboard works as expected; unless the screen went into dark mode because of Windows, in which case they have no effect. This problem started occuring on my ASUS laptop very recently. My laptop has a poor battery, but I don't think that's related. What is going on? I tried resetting power plan settings, turning off adaptive brightness and restarting. I'll give any info asked for. Help required urgently...

    Read the article

  • Laptop goes black after a minute or so

    - by ZEDA-NL
    I have a laptop that is behaving strangely. When I turn it on, it does everything what it is supposed to do, but after a minute or so I hear a Click and all goes black. It's like it turns off the power. It doesn't matter what the laptop is doing. It also happens when it's just waiting in the Bios setup menu. Has someone experienced this before? Can it be the power supply? Can it be a cooling problem? Any ideas? By the way, it's a Compaq Presario Laptop, maybe 3 years old already.

    Read the article

  • Is there a way to do a Windows 7 repair install when you are unable to start/boot Windows 7?

    - by irrational John
    My understanding is that the only way to perform a "repair install" in Windows 7 is to run the install setup.exe within the Windows 7 installation you want to repair. This seems a little brain dead to me since usually the reason I wanted to perform the repair install was because the existing installation was so broken that I could no longer boot and use it. It seems Microsoft is saying my only option in that case is to do a clean install and then reinstall all my apps. So I'm wondering if anyone knows of a way to perform a Windows 7 repair install ... one that preserves your existing OS settings and application installs ... on a Windows 7 partition that cannot be booted.

    Read the article

  • HP dv9000 Vista laptop won't boot from CD/DVD drive

    - by ScottEdwards2000
    My HP dv9000 Vista laptop recently got the BSOD with error 0x0000c1f5. The only way to fix this error is to be able to boot from CD/DVD and use some repair software I have. The problem is that the laptop REFUSES to boot from any CD/DVD I try. I've changed the boot order so the CD/DVD is first, and I can hear the drive spin up a bit upon power-up, but after a second, it spins down and then the laptop tries to boot from hard drive. Any ideas? (I've tried lots of CDs so it's not the media itself) Thanks much!

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >