Search Results

Search found 5643 results on 226 pages for 'machines'.

Page 8/226 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• Unable to ping local machines by name in Windows 7

  - by aardvarkk

  I'm having a strange (and persistent!) problem with pinging local machines on my network by name. I believe my machine (Windows 7 64-bit) is the only one having this issue. This is over a wireless connection. As an example, consider a device on my network by the name of WDTVLiveHub. It's a Western Digital Live Hub (surprise!). If I go to my router's DHCP Client Table in the browser (my router is a WRT400N), I see this entry: WDTVLiveHub 192.168.1.101 Great. So I try to ping that IP address: ping 192.168.1.101 Pinging 192.168.1.101 with 32 bytes of data: Reply from 192.168.1.101: bytes=32 time=9ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Ping statistics for 192.168.1.101: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 9ms, Maximum = 16ms, Average = 14ms OK, still looking good. Now I try to ping it by name: ping WDTVLiveHub Ping request could not find host WDTVLiveHub. Please check the name and try again. From what I've read, this implies a problem with DNS servers and host name lookups. Interestingly, if I type the following: pathping 192.168.1.101 I get this output: Tracing route to WDTVLIVEHUB [192.168.1.101] over a maximum of 30 hops: 0 Scotty [192.168.1.103] 1 WDTVLIVEHUB [192.168.1.101] Computing statistics for 25 seconds... Source to Here This Node/Link Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address 0 Scotty [192.168.1.103] 1/ 100 = 1% | 1 12ms 1/ 100 = 1% 0/ 100 = 0% WDTVLIVEHUB [192.168.1.101] Trace complete. Scotty is obviously the name of my local machine. So it's able to find the name somehow when I do that approach... ipconfig /all shows the following under DNS servers: DNS Servers . . . . . . . . . . . : 192.168.1.1 ***.***.***.*** ***.***.***.*** Where the * represents the same DNS servers that show up in my router under DNS 1 and DNS 2 through the Internet. For completeness, here's the whole output of ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : Scotty Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Peer-Peer IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1397 WLAN Mini-Card Physical Address. . . . . . . . . : 0C-EE-E6-D1-07-E8 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2002:d83a:31e5:1234:5592:398e:8968:43d1(Preferred) Temporary IPv6 Address. . . . . . : 2002:d83a:31e5:1234:ecce:2f79:72a5:5273(Preferred) Link-local IPv6 Address . . . . . : fe80::5592:398e:8968:43d1%26(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.103(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : September-17-12 11:05:57 PM Lease Expires . . . . . . . . . . : September-18-12 11:05:57 PM Default Gateway . . . . . . . . . : fe80::200:ff:fe00:0%26 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 537718502 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-80-3D-D7-00-26-B9-0D-08-70 DNS Servers . . . . . . . . . . . : 192.168.1.1 ***.***.***.*** ***.***.***.*** NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VirtualBox Host-Only Network: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter Physical Address. . . . . . . . . : 08-00-27-00-98-9A DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::b48a:916b:c0f:fb29%23(Preferred) Autoconfiguration IPv4 Address. . : 169.254.251.41(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 570949671 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-80-3D-D7-00-26-B9-0D-08-70 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 15: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{55899375-C31D-4173-A529-4427D63FD28B}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{64B8F35F-A6AB-4D6B-B1D5-DD95F57B1458}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Not sure exactly how to diagnose exactly what's going on... but the problem is really frustrating! The biggest problem is that my mapped network drives have to be done by IP, and then any time the router assigns new IP addresses to those devices, all of my network shares break again. Stinks! Would love some assistance on possible solutions. I've tried all of this netsh catalog resetting and that didn't seem to fix anything at all. Would love an explanation of what's going wrong, too, rather than blindly resetting things! Thanks!

  Read the article

• Microsoft sort Virtual Machine Converter, un outil gratuit pour convertir les machines virtuelles vSphere vers Hyper-V

  Microsoft lorgne les clients de VMware et sort Virtual Machine Converter un outil gratuit pour convertir les machines virtuelles vSphere vers Hyper-V Microsoft lorgne les clients de VMware, en facilitant le processus de migration des environnements de virtualisation de la société vers Hyper-V. La firme vient de publier un outil gratuit qui permet de convertir des machines virtuelles qui s'exécutent sur les produits VMware en un format pouvant s'exécuter dans son environnement de virtualisation Hyper-V. Microsoft Virtual Machine Converter (MVMC) convertit les machines virtuelles créées avec l'outil de virtualisation vSphere 4.1 et 5.0, qui peuvent s'exécuter sur Windows Serv...

  Read the article

• System.DirectoryServices.AccountManagement functions fail to probe some machines (but not others)

  - by JCCyC

  Both the working and failing targets are machines in the same domain. Code is down below. When I use it against some machines in my domain, I get a System.DirectoryServices.AccountManagement.PrincipalOperationException with a message: "While trying to retrieve the authorization groups, an error (1332) occurred." The error is thrown by GetAuthorizationGroups(). Note: The username I use to connect is a local admin to the machine in both cases. PrincipalContext ctx = new PrincipalContext(ContextType.Machine, machineName, domainname + "\\" + adminusername, pass); List<Principal> retList = new List<Principal>(); using (var user = UserPrincipal.FindByIdentity(ctx, probedusername)) { if (user != null) { PrincipalSearchResult<Principal> groups = user.GetAuthorizationGroups(); foreach (Principal group in groups) { retList.Add(group); } } }

  Read the article

• How to scale MySQL with multiple machines?

  - by erotsppa

  I have a web app running LAMP. We recently have an increase in load and is now looking at solutions to scale. Scaling apache is pretty easy we are just going to have multiple multiple machines hosting it and round robin the incoming traffic. However, each instance of apache will talk with MySQL and eventually MySQL will be overloaded. How to scale MySQL across multiple machines in this setup? I have already looked at this but specifically we need the updates from the DB available immediately so I don't think replication is a good strategy here? Also hopefully this can be done with minimal code change. PS. We have around a 1:1 read-write ratio.

  Read the article

• Unable to run OpenMPI across more than two machines

  - by rcollyer

  When attempting to run the first example in the boost::mpi tutorial, I was unable to run across more than two machines. Specifically, this seemed to run fine: mpirun -hostfile hostnames -np 4 boost1 with each hostname in hostnames as <node_name> slots=2 max_slots=2. But, when I increase the number of processes to 5, it just hangs. I have decreased the number of slots/max_slots to 1 with the same result when I exceed 2 machines. On the nodes, this shows up in the job list: <user> Ss orted --daemonize -mca ess env -mca orte_ess_jobid 388497408 \ -mca orte_ess_vpid 2 -mca orte_ess_num_procs 3 -hnp-uri \ 388497408.0;tcp://<node_ip>:48823 Additionally, when I kill it, I get this message: node2- daemon did not report back when launched node3- daemon did not report back when launched The cluster is set up with the mpi and boost libs accessible on an NFS mounted drive. Am I running into a deadlock with NFS? Or, is something else going on?

  Read the article

• Different versions in manifest on different machines

  - by Terry777

  Hi guys, Have two machines, both with VS2005 SP1 installed and with the WinSXS showing the same things installed. When one machine builds a particular C++ .dll .vcproj it ends up with <assemblyIdentity type='win32' name='Microsoft.VC80.MFC' version='8.0.50727.762' processorArchitecture='x86' publicKeyToken='1fc8b3b9a1e18e3b' /> in its manifest file. But on the other machine it ends up with <assemblyIdentity type='win32' name='Microsoft.VC80.MFC' version='8.0.50608.0 processorArchitecture='x86' publicKeyToken='1fc8b3b9a1e18e3b' /> even though this machine does not have '8.0.50608.0' libraries listed in its WinSXS. The .dll built on this machine with the older version referenced has some problems. I have ensured both machines have the same latest source code and references etc.. What could be causing it to build with the different reference? Thanks! Terry

  Read the article

• Memory is leaked only in some machines.

  - by Jorge Córdoba

  We've got a situation where our application is leaking memory while doing some periodic action. The test scenario is composed of a series of processes across two relatively complex WPF windows. The weird thing about the situation is that memory only gets leaked on SOME machines, while others, having exactly the same hardware, can be working for really long times (repeating the process every minute) having their memory almost unchanged (once the GC gets rid of used memory, etc). This is .NET + WPF. Any ideas about where to start looking? What can cause leaks in only some machines? (we're talking about a 30 machine test scenario). I have few experience with WPF, could the graphic card had anything to do with it?

  Read the article

• VM automatic provisioning advice

  - by jdgregson

  In my lab we have 24 workstations, each with five technician-maintained virtual machines set up in VMware Workstation. These provide a lot of management overhead, as we have to update them as well as the host operating systems every three months (the start of the next quarter), which adds up to 144 systems to update instead of just 24. Whenever we need to reimage the hosts, the VMs add another 130GB to each image, which is over 3TB of extra data to send over the network, and a lot more time to apply each image, and then we still have to boot all 120 VMs and assign them a unique IP Address and host names. We would like to get the VMs off the hosts and onto a server, but after looking around for a few days, I still don't know where to begin looking for a solution. There may be a better way to do this, but in my mind, the ideal solution would be to replace the VMs on the host machines with five Thin Client operating systems, each configured to connect to a server and be sent or connected to a unique virtual machine. We can't have 120 VMs running on the server all the time, so the server would have to create a copy of the VM from a template whenever a student tries to boot one, and destroy the VM after the student is finished with it. If there is another client application that has to be installed on the hosts that would be fine, the only reason I'd like to keep them in VMware Workstation is because students already know to look there for the VMs when they need to use them. What, if any, virtualization software will allow this? Is there some other solution I'm not seeing?

  Read the article

• Quick and clean ways to clone virtual machines

  - by Alexandre Nizoux

  I have 2 hypervisors running. One is an ESXi 4, the other one a Hyper-V 2008 R2. My question is: What is the cleanest and easiest way to clone a machine under each hypervisor without using any centralized management tool. Thanks.

  Read the article

• VSS Post Backup failures for Virtual Server 2005 R2 SP1 virtual machines

  - by califguy4christ

  We've been seeing strange errors with Volume Shadow Copy services on our Virtual Server 2005 R2 SP1 host. It appears to be failing on a strange mountpoint in the C:\WINDOWS\Temp\ folders, which I believe is used by VSS to mount a writeable image file. To summarize: The Microsoft Virtual Server 2005 Writer continually goes into a failed retryable state The Virtual Server log reports errors during the Post Backup phase VSS reports errors backing up a mount point of unknown origins The mount point causes NTFS and ftdisk errors The host is x86 Windows Server 2003 Standard, SP2. The virtual machine is the same. Both use basic disks. Here is the writer state: Writer name: 'Microsoft Virtual Server 2005 Writer' Writer Id: {76afb926-87ad-4a20-a50f-cdc69412ddfc} Writer Instance Id: {78df98e2-bf19-4804-890b-15865efef3bd} State: [11] Failed Last error: Retryable error From the Virtual Server log: Virtual Server - Vss Writer - Event ID: 1035: The VSS writer for Virtual Server failed during the PostBackup phase. The guest shadow copies did not get exposed on the host machine, after mounting all the virtual hard disks of the virtual machine VMACHINE. From the Application log: VSS - None - Event ID: 12290: Volume Shadow Copy Service warning: GetVolumeInformationW( \\?\Volume{fb84bae7-87f5-11dd-9832-001cc4961ca6}\,NULL,0, NULL,NULL,[0x00000000], , 260) == 0x0000045d. hr = 0x00000000. From the System log: Ntfs - Disk - Event ID: 55: The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:\WINDOWS\Temp\ {fb84bae7-87f5-11dd-9832-001cc49.... My current theory is that VSS creates a mount point for an image file of the VHD, then the software panics for some reason, leaving everything in an inconsistent state. Removing the mount point doesn't resolve the problem. All of the other disks check out fine with CHKDSK. There's no exclusion option for VHDs or to turn off online backups. Has anyone seen this kind of thing before or point me in the right direction for getting more information about the mount point and it's origins? I haven't been able to trace what application is creating that mount point.

  Read the article

• Ubuntu 9.10 Samba NT_STATUS_CONNECTION_REFUSED errors on remote machines.

  - by user40730

  SAMBA I'm running Samba on Ubuntu 9.10 on a MacBook Pro using Parallels. When I run the smbtree command, I get the following errors: peterv@MBP17U<2005$: sudo smbtree Enter root's password: session request to 192.168.1.156 failed (Called name not present) HADEN \SERVER2 cli_start_connection: failed to connect to SERVER2<20 (0.0.0.0). Error NT_STATUS_CONNECTION_REFUSED \MBP17WIN MBP17win cli_start_connection: failed to connect to MBP17WIN<20 (0.0.0.0). Error NT_STATUS_CONNECTION_REFUSED \MBP17U \MBP17U\IPC$ IPC Service () \MBP17U\Perl \MBP17U\Home \MBP17U\print$ \MBP17 MBP17 cli_start_connection: failed to connect to MBP17<20 (0.0.0.0). Error NT_STATUS_CONNECTION_REFUSED Fri Apr 16 05:24:47 EDT 2010 The MBP17 failure is an OS X system, the SERVER2 failure is a Windows XP system. Running testparm shows no errors. Can someone please help me out?

  Read the article

• IE Kerberos failure on some machines with CNAME web server (with SPN for host's A record)

  - by Eric Thames

  It's fairly well known that IE doesn't like to do Kerberos against hosts that are registered in DNS as CNAMEs. What happens is that IE turns around and uses the underlying A record for the host for looking up the Service Principal Name (SPN). On a test network we are able to get Kerberos working by having the SPN registered for the A record of the host, so that Kerberos authentication happens successfully when accessing the web server via it's CNAME in the browser. Kerberos authentication works properly when directly accessing the web server with the A record host in the URL, but for various reasons that are beyond my control, it is desired to use the CNAME. On the production network, this same configuration fails though and I can't figure out why. Any thoughts? This is a java web application using the SPNEGO library - not IIS. Kerberos authentication is working properly in both the test and production networks (and has been confirmed to not fail back to NTLM), but the CNAME access only works in test.

  Read the article

• Time not propagating to machines on Windows domain

  - by rbeier

  We have a two-domain Active Directory forest: ourcompany.com at the root, and prod.ourcompany.com for production servers. Time is propagating properly through the root domain, but servers in the child domain are unable to sync via NTP. So the time on these servers is starting to drift, since they're relying only on the hardware clock. WHen I type "net time" on one of the production servers, I get the following error: Could not locate a time-server. More help is available by typing NET HELPMSG 3912. When I type "w32tm /resync", i get the following: Sending resync command to local computer The computer did not resync because no time data was available. "w32tm /query /source" shows the following: Free-running System Clock We have three domain controllers in the prod.ourcompany.com subdomain (overkill, but the result of a migration - we haven't gotten rid of one of the old ones yet.) To complicate matters, the domain controllers are all virtualized, running on two different physical hosts. But the time on the domain controllers themselves is accurate - the servers that aren't DCs are the ones having problems. Two of the DCs are running Server 2003, including the PDC emulator. The third DC is running Server 2008. (I could move the PDC emulator role to the 2008 machine if that would help.) The non-DC servers are all running Server 2008. All other Active Directory functionality works fine in the production domain - we're only seeing problems with NTP. I can manually sync each machine to the time source (the PDC emulator) by doing the following: net time \\dc1.prod.ourcompany.com /set /y But this is just a one-off, and it doesn't cause automated time syncing to start working. I guess I could create a scheduled task which runs the above command periodically, but I'm hoping there's a better way. Does anyone have any ideas as to why this isn't working, and what we can do to fix it? Thanks for your help, Richard

  Read the article

• How to avoid downtime when resizing virtual machines

  - by Ivan Buttinoni

  Many IaaS provider offer dynamic upgrade/downgrade of RAM and cores. Usually a Linux VM has to be rebooted to apply these changes. Sometimes, things like VMware tools or other guest services are well integrated so the upgrades to resources are immediately available, but the downgrades still need reboot. How can I solve this issue, so that when downgrading resources I do not have to reboot my guests?

  Read the article

• How to copy remote machines text to local machines clipboard through SSH?

  - by recluze

  I work on a remote machine through ssh. I have a very large text file there (approx. 500 lines) which I usually need to modify, then copy the contents of that file and paste it in my local browser. The way I usually do this is cat filename and then select/copy the ssh output. That takes a lot of time. I was wondering if there is a utility that will put the remote file's contents in my local clipboard.

  Read the article

• Cloudstack virtual machines can't communicate with virtual routers when they are on different hosts

  - by Jorge Suárez de Lis

  I'm using Cloudstack 2.2.14 on a Ubuntu 10.04 set of hosts, and I have a problem on my setup. I have two hosts running. When a virtual router is created on host 1 and a virtual machine using that virtual router is created on host 2, or vice versa, I have no connectivity at all on the virtual machine. First of all, I have to setup the network manually on that virtual machine -usually DHCP is working, but not here-. Then, I can't ping to the virtual router from the virtual machine or vice versa. When both virtual router and virtual machine are created on the same host, everything works! Maybe those packages are being filtered somehow? I have no clue on how to proceed. Both hosts can communicate directly outside the virtualization.

  Read the article

• Backup Xen domU machines while running.

  - by Jonathan Hawkes

  The host machine is running CentOS 5.3 and using LVM to create Logical Volumes (LVs) and to allow live snapshots to be taken of those LVs. My thought was to store all of the image files for the Xen underpriviledged domains (domU) in a single LV and periodically take a snapshot of that LV and copy the disk images out of the snapshot in order to make a live backup of these systems. Is this doable? Is there a better way? Thanks!

  Read the article

• Virtual machines on USB external disk

  - by Cris

  Hello, i'm thinking about installing (using Sun Virtual Box) Ubuntu 10.04 and Windows7 on external disk connected to USB port of my new MacBook; do you think perfomances will be terrific? Have you tried something similar? Thanks in advance ! c.

  Read the article

• Software to search for shared files/folders in all machines in a windows network

  - by nikhil

  I am on a windows network and would like to search for files and folders across all the shared folders in the network. What is a good software/tool that can do this? Thanks.

  Read the article

• Good source of reviews of CULV machines?

  - by Jason Sundram

  I'm potentially interested in acquiring a CULV machine. I like the idea of a netbook, but need a little more horsepower. So, of course, I need to obsess over a hundred different reviews first. Can you recommend some good sources of CULV reviews? Anandtech recently ran a roundup, but I'd prefer sites that have ongoing CULV coverage. Thanks!

  Read the article

• Running virtual machines: Linux vs Windows 7

  - by vikp

  Hi, I have tried running windows xp development virtual machine under windows 7 and the performance was dreadful. I'm considering installing Linux and running the virtual machine from the Linux, but I'm not sure whether I can expect any performance gains? It's a 2.4ghz core 2 duo machine with 4gb ram and 5400 rpm hdd. Can somebody please recommend very cut down version of linux that can run VMWare player and isn't resource hungry? Thank you

  Read the article

• Virtual machines interconnection inside Proxmox 2.1 Cluster

  - by Anton

  We have 3 physical servers (each with 1 NIC) in different datacentres, all of them are interconnected by openvpn bridged private network (10.x.x.x). Inside this network we have fully functional 3 nodes Proxmox 2.1 cluster. So, actually question is: Is there any "proper" way to make "global" local network (172.16.x.x) for all VMs inside cluster, so even if we move VM from one node to other we could reach it by static IP regardless of it's physical location? BTW, we can't add dedicated NIC to each server. Thanks in advance. EDIT: I have tried to make a separate openvpn bridge for 172.16.x.x, now I have at each server two interfaces: SRV1: openvpnbr1 - 172.16.13.1 vmbr0 - 172.16.1.1 SRV2: openvpnbr1 - 172.16.13.2 vmbr0 - 172.16.2.1 But now there is no connection between those ifaces: SRV1: ping 172.16.13.2 From 172.16.1.1 icmp_seq=2 Destination Host Unreachable SRV2: ping 172.16.13.1 From 172.16.2.1 icmp_seq=2 Destination Host Unreachable If I shut down vmbr0 interfaces, so there is connection between servers over openvpn, but vmbr0 is used by Proxmox... Where I am wrong?

  Read the article

• Identifying Hard Drive as performance bottleneck for desktop machines

  - by Programming Hero

  I'm working in a development team where we all use laptops so we can work in multiple locations. These laptops are proving notoriously slow for development work, but at a glance they all look to have the specification for a much faster experience: CPU - Intel Core 2 Duo T7500 Memory - 2GB of RAM We all experience the biggest delays when the hard-drives are being accessed, particularly when swap-files are being thrashed. After doing a little bit of profile, a colleague discovered that our HDDs are seeing Read/Write speeds of about 10MB/sec. This seems abnormally low and we believe it the cause of the problem. Sensibly (though somewhat annoyingly) our business wont blow money on faster drives just to see if it fixes the problem; we need to illustrate this is definitely the problem and that buying some solid-state drives will make it go away. I need some way of showing how 90% of the system resources aren't being used over the course of a day, and that whenever there is utilization, it's all in HDD reads or writes. Are there any tools I could use to provide this information? Does it seem likely the problem is going to be fixed by a faster drive? Should I be looking for alternatives?

  Read the article

• No LPT port in Windows 7 virtual machines

  - by KeyboardMonkey

  Windows 7 has MS virtual PC integrated, the VM settings don't give a parallel LPT port mapping to the physical machine. Where did it go? Has anyone else noticed this, and found a solution? Update: After much digging, I found the one and only reference to this issue, on the VPC Blog: "Parallel port devices are not supported, as they are relatively rare today." -More details- It's a XP VM I've been using since VPC 2007 days, which did have this functionality. This is to configure barcode printers via the LPT port. Since the (new) MS VM can't map to my physical LPT port, I'm having a hard time configuring printers. My physical ports are enabled in the BIOS. It has worked the past 3 years, before switching to Win 7. Any help is appreciated. This screen shot of the VM settings shows COM ports, but LPT is no more In contrast, here is a screen shot of VPC 2007 (before it got integrated into Win 7). Notice how it has LPT support

  Read the article

• Fusion: create "headless" virtual machines?

  - by warren

  Is there a way to run a VM in Fusion that starts when the machine does, but I can then access via Remote Desktop (Windows) or ssh (Linux) rather than by opening the Fusion app, starting the VM, and then connecting however I'd prefer (rdp/ssh)?

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >