Search Results

Search found 210 results on 9 pages for 'macintosh'.

Page 8/9 | < Previous Page | 4 5 6 7 8 9  | Next Page >

• Weird vps server issue

  - by anon-user0

  I have an unmanaged linux vps Ubuntu 11.10 (Oneiric Ocelot). I have LNMP installed. Also php-fpm php-apc, varnish, memcache. I have (or rather had) several live sites on it. under normal load the server uses ~700 mb memory. But since last night its using only 20mb~ memory and a lot of the services seems to be down (according to htop) I only see nginx working and mysql starts up and goes does every few minutes on a loop. Here are some information on the server that might help you help me: root@server:~# uname -a Linux server 2.6.18-308.el5.028stab099.3 #1 SMP Wed Mar 7 15:56:00 MSK 2012 i686 i686 i386 GNU/Linux - root@server:~# ifconfig -a lo Link encap:Local Loopback LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.2 P-t-P:127.0.0.2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:12515 errors:0 dropped:0 overruns:0 frame:0 TX packets:9541 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:7191214 (7.1 MB) TX bytes:536726 (536.7 KB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:176.31.158.78 P-t-P:176.31.158.78 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 - root@server:~# netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:http-alt *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp6 0 0 [::]:http-alt [::]:* LISTEN tcp6 0 0 [::]:ssh [::]:* LISTEN Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 9307368 @/com/ubuntu/upstart - htop: http://i.stack.imgur.com/NHKYX.png EDIT: Stressed. mind was not working adding log: root@server:~# less /var/log/syslog Jun 27 05:27:42 server syslogd 1.5.0#6ubuntu1: restart. Jun 27 05:39:01 server CRON[9298]: (root) CMD ([ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jun 27 05:40:01 server CRON[9463]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 27 05:46:21 server sm-msp-queue[9480]: q5R1R7Ue004056: to=root, ctladdr=root (0/0), delay=00:19:14, xdelay=00:06:18, mailer=relay, pri=122407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 05:52:39 server sm-msp-queue[9480]: q5QMk7S9009582: to=root, ctladdr=root (0/0), delay=03:06:32, xdelay=00:06:18, mailer=relay, pri=842407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:00:01 server CRON[15671]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 27 06:06:22 server sm-msp-queue[15690]: q5R1R7Ue004056: to=root, ctladdr=root (0/0), delay=00:39:15, xdelay=00:06:18, mailer=relay, pri=212407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:09:01 server CRON[18114]: (root) CMD ([ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jun 27 06:12:40 server sm-msp-queue[15690]: q5QMk7S9009582: to=root, ctladdr=root (0/0), delay=03:26:33, xdelay=00:06:18, mailer=relay, pri=932407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:20:02 server CRON[21888]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 27 06:26:22 server sm-msp-queue[21907]: q5R1R7Ue004056: to=root, ctladdr=root (0/0), delay=00:59:15, xdelay=00:06:18, mailer=relay, pri=302407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:27:02 server CRON[24021]: (root) CMD (cd / && run-parts --report /etc/cron.hourly) Jun 27 06:32:40 server sm-msp-queue[21907]: q5QMk7S9009582: to=root, ctladdr=root (0/0), delay=03:46:33, xdelay=00:06:18, mailer=relay, pri=1022407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:39:01 server CRON[27941]: (root) CMD ([ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jun 27 06:40:02 server CRON[28110]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 27 06:46:22 server sm-msp-queue[28125]: q5R1R7Ue004056: to=root, ctladdr=root (0/0), delay=01:19:15, xdelay=00:06:18, mailer=relay, pri=392407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:52:40 server sm-msp-queue[28125]: q5QMk7S9009582: to=root, ctladdr=root (0/0), delay=04:06:33, xdelay=00:06:18, mailer=relay, pri=1112407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 06:52:40 server sm-msp-queue[28125]: q5QMk7S9009582: q5R2e4uo028125: sender notify: Warning: could not send message for past 4 hours Jun 27 06:52:44 server sm-msp-queue[28125]: q5R2e4uo028125: to=root, delay=00:00:04, xdelay=00:00:04, mailer=relay, pri=33690, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:00:02 server CRON[1543]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 27 07:06:21 server sm-msp-queue[1560]: q5R2e4uo028125: to=root, delay=00:13:41, xdelay=00:06:18, mailer=relay, pri=123690, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:09:01 server CRON[3986]: (root) CMD ([ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jun 27 07:12:39 server sm-msp-queue[1560]: q5R1R7Ue004056: to=root, ctladdr=root (0/0), delay=01:45:32, xdelay=00:06:18, mailer=relay, pri=482407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:18:57 server sm-msp-queue[1560]: q5QMk7S9009582: to=root, ctladdr=root (0/0), delay=04:32:50, xdelay=00:06:18, mailer=relay, pri=1202407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:20:02 server CRON[7760]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jun 27 07:26:22 server sm-msp-queue[7775]: q5R2e4uo028125: to=root, delay=00:33:42, xdelay=00:06:18, mailer=relay, pri=213690, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:27:01 server CRON[9887]: (root) CMD (cd / && run-parts --report /etc/cron.hourly) Jun 27 07:32:40 server sm-msp-queue[7775]: q5R1R7Ue004056: to=root, ctladdr=root (0/0), delay=02:05:33, xdelay=00:06:18, mailer=relay, pri=572407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:38:58 server sm-msp-queue[7775]: q5QMk7S9009582: to=root, ctladdr=root (0/0), delay=04:52:51, xdelay=00:06:18, mailer=relay, pri=1292407, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] Jun 27 07:39:01 server CRON[13813]: (root) CMD ([ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth : root@server:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/simfs 20G 2.3G 18G 12% / - Jun 26 16:22:41 server varnishd[1413]: Child (32425) died signal=3 Jun 26 16:22:41 server varnishd[1413]: child (21687) Started Jun 26 16:22:41 server varnishd[1413]: Child (21687) said Child starts Jun 26 16:22:41 server varnishd[1413]: Child (21687) said SMF.s0 mmap'ed 1073741824 bytes of 1073741824 Jun 26 16:34:28 server -- MARK -- Jun 26 16:54:29 server -- MARK -- Jun 26 17:14:29 server -- MARK -- Jun 26 17:34:29 server -- MARK -- Jun 26 17:54:29 server -- MARK -- Jun 26 18:14:29 server -- MARK -- Jun 26 18:34:29 server -- MARK -- Jun 26 18:54:29 server -- MARK -- Jun 26 19:14:29 server -- MARK -- Jun 26 19:34:29 server -- MARK -- Jun 26 19:54:29 server -- MARK -- Jun 26 20:14:29 server -- MARK -- Jun 26 20:34:29 server -- MARK -- Jun 26 20:48:12 server exiting on signal 15 Jun 26 20:51:58 server syslogd 1.5.0#6ubuntu1: restart. Jun 26 20:52:01 server varnishd[1324]: Platform: Linux,2.6.18-308.el5.028stab099.3,i686,-sfile,-smalloc,-hcritbit Jun 26 21:11:58 server -- MARK -- Jun 26 21:31:58 server -- MARK -- Jun 26 21:51:58 server -- MARK -- Jun 26 22:11:58 server -- MARK -- Jun 26 22:31:58 server -- MARK -- Jun 26 22:51:58 server -- MARK -- Jun 26 23:11:58 server -- MARK -- Jun 26 23:31:58 server -- MARK -- Jun 26 23:51:58 server -- MARK -- Jun 27 00:11:58 server -- MARK -- Jun 27 00:23:42 server exiting on signal 15 Jun 27 02:21:10 server syslogd 1.5.0#6ubuntu1: restart. Jun 27 02:21:12 server varnishd[1341]: Platform: Linux,2.6.18-308.el5.028stab099.3,i686,-sfile,-smalloc,-hcritbit Jun 27 02:41:10 server -- MARK -- Jun 27 02:46:41 server syslogd 1.5.0#6ubuntu1: restart. Jun 27 03:20:44 server syslogd 1.5.0#6ubuntu1: restart. Jun 27 03:20:46 server varnishd[1238]: Platform: Linux,2.6.18-308.el5.028stab099.3,i686,-sfile,-smalloc,-hcritbit Jun 27 03:20:46 server varnishd[1238]: child (1239) Started Jun 27 03:20:46 server varnishd[1238]: Child (1239) said Child starts Jun 27 03:20:46 server varnishd[1238]: Child (1239) said SMF.s0 mmap'ed 1073741824 bytes of 1073741824 Jun 27 03:32:52 server exiting on signal 15 Jun 27 03:33:16 server syslogd 1.5.0#6ubuntu1: restart. Jun 27 03:33:31 server varnishd[1372]: Platform: Linux,2.6.18-308.el5.028stab099.3,i686,-sfile,-smalloc,-hcritbit Jun 27 03:53:16 server -- MARK -- Jun 27 04:13:16 server -- MARK -- Jun 27 04:33:16 server -- MARK -- Jun 27 04:53:16 server -- MARK -- Jun 27 05:13:16 server -- MARK -- Jun 27 05:27:42 server syslogd 1.5.0#6ubuntu1: restart. Jun 27 05:53:17 server -- MARK -- Jun 27 06:13:17 server -- MARK -- Jun 27 06:33:17 server -- MARK -- Jun 27 06:53:17 server -- MARK -- Jun 27 07:13:17 server -- MARK -- Jun 27 07:33:17 server -- MARK -- Jun 27 07:53:17 server -- MARK -- Jun 27 08:13:17 server -- MARK -- Jun 27 08:33:17 server -- MARK -- Jun 27 08:53:17 server -- MARK -- Jun 27 09:13:17 server -- MARK -- Jun 27 09:33:17 server -- MARK -- Jun 27 09:53:17 server -- MARK -- Jun 27 10:13:17 server -- MARK -- Jun 27 10:33:17 server -- MARK -- Jun 27 10:53:17 server -- MARK -- Jun 27 11:13:17 server -- MARK -- Jun 27 11:33:17 server -- MARK -- Jun 27 11:53:18 server -- MARK -- Jun 27 12:13:18 server -- MARK -- Jun 27 12:33:18 server -- MARK -- Jun 27 12:53:18 server -- MARK -- Jun 27 13:13:18 server -- MARK -- Jun 27 13:33:18 server -- MARK -- Jun 27 13:53:18 server -- MARK -- Jun 27 14:13:18 server -- MARK -- Jun 27 14:33:18 server -- MARK -- Jun 27 14:53:18 server -- MARK -- -- root@server:~# cat /var/log/nginx/error.log 2012/06/27 03:32:54 [alert] 1199#0: worker process 1203 exited on signal 9 2012/06/27 03:32:54 [alert] 1199#0: worker process 1200 exited on signal 9 2012/06/27 03:32:54 [alert] 1199#0: worker process 1201 exited on signal 9 2012/06/27 03:32:54 [alert] 1199#0: worker process 1202 exited on signal 9 root@server:~# cat /var/log/nginx/access.log 31.210.99.87 - - [27/Jun/2012:09:09:08 +0400] "GET /w00tw00t.at.ISC.SANS.DFind:) HTTP/1.1" 400 172 "-" "-" 88.191.138.103 - - [27/Jun/2012:13:27:08 +0400] "GET /cms/cmx.jsp HTTP/1.1" 301 184 "-" "-" 88.191.138.103 - - [27/Jun/2012:13:27:08 +0400] "GET /iesvc/iesvc.jsp HTTP/1.1" 301 184 "-" "-" 88.191.138.103 - - [27/Jun/2012:13:27:08 +0400] "GET /cmd2/index.jsp HTTP/1.1" 301 184 "-" "-" 88.191.138.103 - - [27/Jun/2012:13:27:09 +0400] "GET /cmd/index.jsp HTTP/1.1" 301 184 "-" "-" 58.97.147.197 - - [27/Jun/2012:17:17:19 +0400] "GET / HTTP/1.1" 301 184 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.56 Safari/536.5" 58.97.147.197 - - [27/Jun/2012:17:17:37 +0400] "GET / HTTP/1.1" 301 184 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.56 Safari/536.5" 58.97.147.197 - - [27/Jun/2012:17:17:38 +0400] "-" 400 0 "-" "-" 58.97.147.197 - - [27/Jun/2012:17:17:38 +0400] "-" 400 0 "-" "-" 58.97.147.197 - - [27/Jun/2012:17:17:48 +0400] "-" 400 0 "-" "-" - root@server:~# cat /var/log/daemon.log Jun 26 20:48:10 server xinetd[1177]: Exiting... Jun 26 20:51:58 server xinetd[1174]: Reading included configuration file: /etc/xinetd.d/daytime [file=/etc/xinetd.d/daytime] [line=28] Jun 26 20:51:58 server xinetd[1174]: Reading included configuration file: /etc/xinetd.d/discard [file=/etc/xinetd.d/discard] [line=26] Jun 26 20:51:58 server xinetd[1174]: Reading included configuration file: /etc/xinetd.d/echo [file=/etc/xinetd.d/echo] [line=25] Jun 26 20:51:58 server xinetd[1174]: Reading included configuration file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=26] Jun 26 20:51:58 server xinetd[1174]: removing chargen Jun 26 20:51:58 server xinetd[1174]: removing chargen Jun 26 20:51:58 server xinetd[1174]: removing daytime Jun 26 20:51:58 server xinetd[1174]: removing daytime Jun 26 20:51:58 server xinetd[1174]: removing discard Jun 26 20:51:58 server xinetd[1174]: removing discard Jun 26 20:51:58 server xinetd[1174]: removing echo Jun 26 20:51:58 server xinetd[1174]: removing echo Jun 26 20:51:58 server xinetd[1174]: removing time Jun 26 20:51:58 server xinetd[1174]: removing time Jun 26 20:51:58 server xinetd[1174]: xinetd Version 2.3.14 started with libwrap loadavg options compiled in. Jun 26 20:51:58 server xinetd[1174]: Started working: 0 available services Jun 26 20:52:01 server vnstatd[1330]: vnStat daemon 1.11 started. Jun 26 20:52:01 server vnstatd[1330]: Monitoring: venet0 Jun 27 00:23:41 server xinetd[1174]: Exiting... Jun 27 02:21:12 server vnstatd[1349]: vnStat daemon 1.11 started. Jun 27 02:21:12 server vnstatd[1349]: Monitoring: venet0 Jun 27 03:20:44 server xinetd[1166]: attribute: disable should not be in default section [file=/etc/xinetd.conf] [line=12] Jun 27 03:20:44 server xinetd[1166]: Reading included configuration file: /etc/xinetd.d/chargen [file=/etc/xinetd.conf] [line=15] Jun 27 03:20:44 server xinetd[1166]: Reading included configuration file: /etc/xinetd.d/daytime [file=/etc/xinetd.d/daytime] [line=28] Jun 27 03:20:44 server xinetd[1166]: Reading included configuration file: /etc/xinetd.d/discard [file=/etc/xinetd.d/discard] [line=26] Jun 27 03:20:44 server xinetd[1166]: Reading included configuration file: /etc/xinetd.d/echo [file=/etc/xinetd.d/echo] [line=25] Jun 27 03:20:44 server xinetd[1166]: Reading included configuration file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=26] Jun 27 03:20:44 server xinetd[1166]: removing chargen Jun 27 03:20:44 server xinetd[1166]: removing chargen Jun 27 03:20:44 server xinetd[1166]: removing daytime Jun 27 03:20:44 server xinetd[1166]: removing daytime Jun 27 03:20:44 server xinetd[1166]: removing discard Jun 27 03:20:44 server xinetd[1166]: removing discard Jun 27 03:20:44 server xinetd[1166]: removing echo Jun 27 03:20:44 server xinetd[1166]: removing echo Jun 27 03:20:44 server xinetd[1166]: removing time Jun 27 03:20:44 server xinetd[1166]: removing time Jun 27 03:20:44 server xinetd[1166]: xinetd Version 2.3.14 started with libwrap loadavg options compiled in. Jun 27 03:20:44 server xinetd[1166]: Started working: 0 available services Jun 27 03:20:46 server vnstatd[1249]: vnStat daemon 1.11 started. Jun 27 03:20:46 server vnstatd[1249]: Monitoring: venet0 Jun 27 03:32:41 server xinetd[1166]: Exiting... Jun 27 03:33:32 server vnstatd[1380]: vnStat daemon 1.11 started. Jun 27 03:33:32 server vnstatd[1380]: Monitoring: venet0 root@server:~# - Anything else you need let me know

  Read the article

• How to Watch NCAA March Madness Online

  - by DigitalGeekery

  You’ve filled out your brackets and now you are ready for one of America’s most popular sporting events. But what if you are you stuck at work or away from your TV?  Or your local affiliate is showing a different game? Today we show how to catch all the March Madness online. March Madness on Demand You’ll need a broadband connection, 512 MB RAM or higher, with cookies and Javascript enabled in your browser. March Madness on Demand offers two viewing options, a Standard Player and a High Quality player. The High Quality player is not, unfortunately, high definition. Standard Player Requirements Windows XP/Vista/7 or Mac OS X IE 6+ (We also successfully tested it in Firefox, Chrome, & Opera) Adobe Flash Player 9 or higher High Quality Player Requirements 2.4 GHz Pentium 4 or Intel-based Macintosh Mac OS 10.4.8+ (Intel-based) Windows: XP SP2, Vista, Server 2003, Server 2008, Windows 7 Firefox 1.5+ or IE 6/7/8 Silverlight 3 browser plug-in Watching March Madness on Demand Go to the March Madness on Demand website. (Link below) Check the “Watch in High Quality” section to see if your browser is ready and compatible for the High Quality viewer. If not, you’ll see a message indicating either your browser and system are incompatible… Or that you need to install Silverlight. To install Silverlight, click on the “Get HQ” button and follow the prompts to download and install Silverlight. To launch the player, click the large red “Launch Player” button. At the top of the screen, you’ll see the current and upcoming games. Click on “Watch Now” below to begin watching. At the bottom left, is where you click to watch with the High Quality player. If to many people are watching the High Quality player, you’ll see the following message and have to go back to the Standard Player. At the lower right are volume controls, a “Full Screen” button, and a “Share” button which allows you to share the game you are watching on various social networking sites like Facebook and Twitter. Perhaps most importantly for those who want to steal a bit of viewing time while at work is the “Boss Button” at the top right. Clicking on the “Boss Button” will open a fake Office document so it may appear at first glance like you’re actually doing legitimate work. To return to the game, click anywhere on the screen with your mouse. You’ll be able to catch every single game of the tournament from the first round all the way through the championship with March Madness on Demand. If your computer and Internet connection can handle it, you can even watch multiple games at the same time by opening March Madness on Demand in multiple browser windows. Watch March Madness online Similar Articles Productive Geek Tips Weekend Fun: Watch Television on Your PC with AnyTVWatch NFL Sunday Night Football On Your PCWatch TV On Your PC with FreeZ Online TVGeek Fun: Download Favorite NBC Programs for FreeDitch the RealPlayer Bloat with Real Alternative TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional How to Browse Privately in Firefox Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet

  Read the article

• Server-Sent Events using GlassFish (TOTD #179)

  - by arungupta

  Bhakti blogged about Server-Sent Events on GlassFish and I've been planning to try it out for past some days. Finally, I took some time out today to learn about it and build a simplistic example showcasing the touch points. Server-Sent Events is developed as part of HTML5 specification and provides push notifications from a server to a browser client in the form of DOM events. It is defined as a cross-browser JavaScript API called EventSource. The client creates an EventSource by requesting a particular URL and registers an onmessage event listener to receive the event notifications. This can be done as shown var url = 'http://' + document.location.host + '/glassfish-sse/simple';eventSource = new EventSource(url);eventSource.onmessage = function (event) { var theParagraph = document.createElement('p'); theParagraph.innerHTML = event.data.toString(); document.body.appendChild(theParagraph);} This code subscribes to a URL, receives the data in the event listener, adds it to a HTML paragraph element, and displays it in the document. This is where you'll parse JSON and other processing to display if some other data format is received from the URL. The URL to which the EventSource is subscribed to is updated on the server side and there are multipe ways to do that. GlassFish 4.0 provide support for Server-Sent Events and it can be achieved registering a handler as shown below: @ServerSentEvent("/simple")public class MySimpleHandler extends ServerSentEventHandler { public void sendMessage(String data) { try { connection.sendMessage(data); } catch (IOException ex) { . . . } }} And then events can be sent to this handler using a singleton session bean as shown: @Startup@Statelesspublic class SimpleEvent { @Inject @ServerSentEventContext("/simple") ServerSentEventHandlerContext<MySimpleHandler> simpleHandlers; @Schedule(hour="*", minute="*", second="*/10") public void sendDate() { for(MySimpleHandler handler : simpleHandlers.getHandlers()) { handler.sendMessage(new Date().toString()); } }} This stateless session bean injects ServerSentEventHandlers listening on "/simple" path. Note, there may be multiple handlers listening on this path. The sendDate method triggers every 10 seconds and send the current timestamp to all the handlers. The client side browser simply displays the string. The HTTP request headers look like: Accept: text/event-streamAccept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3Accept-Encoding: gzip,deflate,sdchAccept-Language: en-US,en;q=0.8Cache-Control: no-cacheConnection: keep-aliveCookie: JSESSIONID=97ff28773ea6a085e11131acf47bHost: localhost:8080Referer: http://localhost:8080/glassfish-sse/faces/index2.xhtmlUser-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.54 Safari/536.5 And the response headers as: Content-Type: text/event-streamDate: Thu, 14 Jun 2012 21:16:10 GMTServer: GlassFish Server Open Source Edition 4.0Transfer-Encoding: chunkedX-Powered-By: Servlet/3.0 JSP/2.2 (GlassFish Server Open Source Edition 4.0 Java/Apple Inc./1.6) Notice, the MIME type of the messages from server to the client is text/event-stream and that is defined by the specification. The code in Bhakti's blog can be further simplified by using the recently-introduced Twitter API for Java as shown below: @Schedule(hour="*", minute="*", second="*/10") public void sendTweets() { for(MyTwitterHandler handler : twitterHandler.getHandlers()) { String result = twitter.search("glassfish", String.class); handler.sendMessage(result); }} The complete source explained in this blog can be downloaded here and tried on GlassFish 4.0 build 34. The latest promoted build can be downloaded from here and the complete source code for the API and implementation is here. I tried this sample on Chrome Version 19.0.1084.54 on Mac OS X 10.7.3.

  Read the article

• How do I detect whether the sample supplied by VideoSink.OnSample() is right-side up?

  - by Ken Smith

  We're currently using the Silverlight VideoSink to capture video from users' local webcams, kinda like so: protected override void OnSample(long sampleTime, long frameDuration, byte[] sampleData) { if (FrameShouldBeSubmitted()) { byte[] resampledData = ResizeFrame(sampleData); mediaController.SetVideoFrame(resampledData); } } Now, on most of the machines that we've tested, the video sample provided in the byte[] sampleData parameter is upside-down, i.e., if you try to take the RGBA data and turn it into, say, a WriteableBitmap, the bitmap will be upside-down. That's odd, but fairly easy to correct, of course -- you just have to reverse the array as you encode it. The problem is that at least on some machines (e.g., the single Macintosh in our test environment), the video sample provided is no longer upside-down, but right-side up, and hence, flipping the image actually results in an image that's received upside-down on the far side. I reported this to MS as a bug, but their (terse) response was that it was "As Designed". Further attempts at clarification have so far been ignored. Now, I'll grant that it's kinda entertaining to imagine the discussions behind this design decision: "OK, just to make it interesting, let's play the video rightside up on a Mac, but let's turn it upside down for Windows!" "Great idea!" "Yeah, that'll keep those developers guessing!" But beyond that, I can't find this, umm, "feature" documented anywhere, nor can I find any documentation on how one is supposed to be able to tell that a given video sample is upside down or rightside up. Any thoughts on how to tell this?

  Read the article

• When sending headers to download a PDF, Safari appends .html

  - by alex

  Here is the request and response headers http://www.example.com/get/pdf GET /~get/pdf HTTP/1.1 Host: www.example.com User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive Referer: http://www.example.com Cookie: etc HTTP/1.1 200 OK Date: Thu, 29 Apr 2010 02:20:43 GMT Server: Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8i DAV/2 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 X-Powered-By: Me Expires: Thu, 19 Nov 1981 08:52:00 GMT Pragma: no-cache Cache-Control: private Content-Disposition: attachment; filename="File #1.pdf" Content-Length: 18776 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: text/html; charset=utf-8 ---------------------------------------------------------- Basically, the response headers are sent by DOMPDF's stream() method. In Firefox, the file is prompted as File #1.pdf. However, in Safari, the file is saved as File #1.pdf.html. Does anyone know why Safari is appending the html extension to the filename?

  Read the article

• What is the correct JNA mapping for UniChar on Mac OS X?

  - by Trejkaz

  I have a C struct like this: struct HFSUniStr255 { UInt16 length; UniChar unicode[255]; }; I have mapped this in the expected way: public class HFSUniStr255 extends Structure { public UInt16 length; // UInt16 is just an IntegerType with length 2 for convenience. public /*UniChar*/ char[] unicode = new char[255]; //public /*UniChar*/ byte[] unicode = new byte[255*2]; //public /*UniChar*/ UInt16[] unicode = new UInt16[255]; public HFSUniStr255() { } public HFSUniStr255(Pointer pointer) { super(pointer); } } If I use this version, I get every second character of the string into my char[] ("aits D" for "Macintosh HD".) I am assuming that this is something to do with being on a 64-bit platform and JNA mapping the value to a 32-bit wchar_t but then chopping off the high 16 bits on each wchar_t on copying them back. If I use the byte[] version, I get data which decodes correctly using the UTF-16LE charset. If I use the UInt16[] version, I get the right code point for each character but it is then inconvenient to convert them back into a string. Is there some way I can define my type as char[], and yet have it convert correctly?

  Read the article

• Issue with 'Hello Android' tutorial

  - by Mike Needham

  I am brand new to Eclipse and Android, but somewhat familiar with Java. That having been said, I tried to follow the 'Hello Android' tutorial from the developer site using the latest Eclipse (Galieo) and the 2.1 Android SDK, I am on a Macintosh running Snow Leopard (OS X 10.6). I have a default virtual device (though my target is actually for phones like my own HTC Incredible which has the snapdragon processor and of course all the latest accoutrement in smart phones. Everything seemed to go okay until I went to RUN>RUN and then selected 'Android Application'. My computer spins it's wheels for a while and then I see two errors. I have pasted the output below: [2010-05-04 01:53:46 - HelloAndroid] ------------------------------ [2010-05-04 01:53:46 - HelloAndroid] Android Launch! [2010-05-04 01:53:46 - HelloAndroid] adb is running normally. [2010-05-04 01:53:46 - HelloAndroid] Performing com.example.helloandroid.HelloAndroid activity launch [2010-05-04 01:53:46 - HelloAndroid] Automatic Target Mode: launching new emulator with compatible AVD 'myAVD' [2010-05-04 01:53:46 - HelloAndroid] Launching a new emulator with Virtual Device 'myAVD' [2010-05-04 01:53:58 - HelloAndroid] New emulator found: emulator-5554 [2010-05-04 01:53:58 - HelloAndroid] Waiting for HOME ('android.process.acore') to be launched... [2010-05-04 01:53:59 - Emulator] 2010-05-04 01:53:59.501 emulator[10398:903] Warning once: This application, or a library it uses, is using NSQuickDrawView, which has been deprecated. Apps should cease use of QuickDraw and move to Quartz. [2010-05-04 01:54:23 - HelloAndroid] emulator-5554 disconnected! Cancelling 'com.example.helloandroid.HelloAndroid activity launch'! I never do see the text in the emulator and the emulator crashes with a message about it quitting unexpectedly. The actual code is line by line from the tutorial and I have never been able to get to the XML part yet. I am not sure what is wrong with my environment setup or if it is just an incompatibility with Snow Leopard? I would REALLY appreciate any help in resolving this as I am very interested in developing on this platform. Thank-you, Mike N Lawrence, Kansas

  Read the article

• how can I parse and group/do stats on user agent strings?

  - by user151841

  I have a database that has the various user-agent strings of visitors to our site. I'd like to do a 'survey' of them to see what browsers our users are using, so that I can know what features I can use in future development. Is there a tool to parse and run statistics on user-agent strings, or a bunch of strings like this? Ideally, I'd like to see a hierarchical grouping of the stats. For instance: Opera/9.80 (Windows Mobile; WCE; Opera Mobi/WMD-50301; U; en) Presto/2.4.13 Version/10.00 Opera/9.80 (J2ME/MIDP; Opera Mini/4.2.14912/1280; U; en) Presto/2.2.0 Opera/9.80 (J2ME/MIDP; Opera Mini/4.2.13918/812; U; en) Presto/2.2.0 Opera/9.64 (Macintosh; Intel Mac OS X; U; en) Presto/2.1.1 Opera/9.60 (J2ME/MIDP; Opera Mini/4.2.13918/786; U; en) Presto/2.2.0 Opera/9.60 (J2ME/MIDP; Opera Mini/4.0.10992/432; U; en) Presto/2.2.0 I'd like to see 6 entries for Opera, broken down into 3 for 9.80, 1 for 9.64 and 2 for 9.60, and so forth for all browsers. Other dimensions, such as OS, would cross the boundaries of the browser version hierarchy, but it might be nice to see also.

  Read the article

• how can a Win32 App plugin load its DLL in its own directory

  - by Jean-Denis Muys

  My code is a plugin for a specific Application, written in C++ using Visual Studio 8. It uses two DLL from an external provider. Unfortunately, my plugin fails to start because the DLLs are not found (I put them in the same directory as the plugin itself). When I manually move or copy the DLLs to the host application directory, then the plugin loads fine. This moving was deemed unacceptably cumbersome for the end user, and I am looking for a way for my plugin to load its DLLs transparently. What can I do? Relevant details: the host Application plugins are located in a directory mandated by the host application. That directory is not in the DLL search path and I don't control it. The plugin is itself packaged as a subdirectory of the plugin directory, holding the plugin code itself, but also any resource associated with the plugin (eg images, configuration files…). I control what's inside that subdirectory, called a "bundle", but not where it's located. the common plugin installation idiom for that App is for the end user to copy the plugin bundle to the plugin directory. This plugin is a port from the Macintosh version of the plugin. On the Mac there is no issue because each binary contains its own dynamic library search path, which I set as I needed to for my plugin binary. To set that on the Mac simply involves a project setting in the Xcode IDE. This is why I would hope for something similar in Visual Studio, but I could not find anything relevant. Moreover, Visual Studio's help was anything but, and neither was Google. A possible workaround would be for my code to explicitly tell Windows where to find the DLL, but I don't know how, and in any case, since my code is not even started, it hasn't got the opportunity to do so. As a Mac developer, I realize that I may be asking for something very elementary. If such is the case, I apologize, but I have run out of hair to pull out.

  Read the article

• Why is Firefox prompting to download a file that is POST'd to?

  - by alex

  This is the most peculiar thing. It is from an old in house CMS. When I attempt to submit my changes, it prompts to save the file linked in the action attribute of the form. Headers Request POST /~site/edit/articles/article_save.php?id=54 HTTP/1.1 Host: example.com User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive Referer: http://example.com Content-Type: multipart/form-data; boundary=---------------------------10102754414578508781458777923 Content-Length: 940 -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="title" Home Content -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="catid" 18 -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="activecheck" 1 -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="image" -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="contentWidgToolbarSelectBlock" <p> -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="content" <p>Edit your article in this text box.</p> -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="contentWidgEditor" true -----------------------------10102754414578508781458777923-- Response HTTP/0.9 200 OK And then Firefox shows.... I can't determine from the response headers as to why this is prompting to open/save. It has always worked. All other PHP files on the site work fine. Anyone have a clue? Thanks Update Apparently, it just crashes Safari.

  Read the article

• Another developer revoked and re-created my client's iOS Distribution Certificate - does this mean I can never update my client's existing app?

  - by Schnapple

  Here is the story so far: A client hired us to do an iPhone app for them. This client had never done an iPhone app before and as part of the arrangement we handled all aspects for them, including app store submission, and we handle some level of future development (new features, bug/security fixes, etc.) We created a Distribution certificate and key pair on the client's behalf We developed the app, published it to the App Store without incident Some time later the client hired a second developer to do a different app for them This second developer, it appears, has revoked the existing Distribution certificate and created a new one with a new key pair on their system This second developer shared the new Distribution certificate and key pair with us for future reference. Due to user error, this new certificate and key pair has now been imported onto the Macintosh where the original certificate and key pair for the original app we developed were created and the originals were not backed up. So we have App #1 on the App Store with Distribution certificate/key pair #1 App #2 either on the App Store or soon to be using Distribution certificate/key pair #2 Distribution certificate/key pair #1 appears to be lost now So my question is: if we ever need to update App #1, will we be able to, using Distribution certificate/key pair #2? Or will we have to upload it as a new app?

  Read the article

• Ajax Request using jQuery in Rails

  - by Steve

  Hi... I am sending an Ajax Request using jQuery. What happens is that I am getting an "405 Method Not Allowed" Error. I am just posting a form, which would get the detail from the form and insert it into the DB. Just the usual stuff.I am using WEBrick that comes as default with the rails package. Can somebody please tell me how to fix this. This is the code that triggers the Ajax Request $.post($(this).attr("action") + ".js",$(this).serialize(),null,"script"); Response Headers Cache-Control no-cache Allow GET, PUT, DELETE Content-Type text/html; charset=utf-8 Content-Length 9502 Server WEBrick/1.3.1 (Ruby/1.9.1/2009-12-07) Date Wed, 02 Jun 2010 20:41:33 GMT Connection Keep-Alive Request Headers Host localhost:3000 User-Agent Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept application/json, text/javascript, */* Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Content-Type application/x-www-form-urlencoded; charset=UTF-8 X-Requested-With XMLHttpRequest Referer http://localhost:3000/viewspot/3 Content-Length 141 Pragma no-cache Cache-Control no-cache

  Read the article

• import text file containing line breaks into excel

  - by Maximilian Tyrtania

  I have a plain text file looking like this: "some text containing line breaks" I'm trying to talk excel 2004 (Mac, v.11.5) into opening this file correctly. I'd expect to see only one cell (A1) containing all of the above (without the quotes)... But alas, I can't make it happen, because Excel seems to insist on using the CR's as row delimiters, even if I set the text qualifier to double quote. I was sort of hoping that Excel would understand that those line breaks are part of the value - they are embedded in double quotes which should qualify them as part of the value. So my Excel sheet has 5 rows, which is not what I want. I also tried this Applescript to no avail: tell application "Microsoft Excel" activate open text file filename ¬ "Users:maximiliantyrtania:Desktop:linebreaks" data type delimited ¬ text qualifier text qualifier double quote ¬ field info {{1, text format}} ¬ origin Macintosh with tab end tell If I could tell Excel to use a row delimiter other than CR (or LF), well, I'd be a happy camper, but excel seems to allow the change of the field delimiter only, not the row delimiter. Any pointers? Thanks, Max Excel's open

  Read the article

• Python - Problems using mechanize to log into a difficult website

  - by user1781599

  × 139886 I am trying to log in to betfair.com by using mechanize. I have tried several ways but it always fail. This is the code I have developed so far, can anyone help me to identify what is wrong with it and how I can improve it to log into my betfair account? Thanks, import cookielib import urllib import urllib2 from BeautifulSoup import BeautifulSoup import mechanize from mechanize import Browser import re bf_username_name = "username" bf_password_name = "password" bf_form_name = "loginForm" bf_username = "xxxxx" bf_password = "yyyyy" urlLogIn = "http://www.betfair.com/" accountUrl = "https://myaccount.betfair.com/account/home?rlhm=0&" # This url I will use to verify if log in has been successful br = mechanize.Browser(factory=mechanize.RobustFactory()) br.addheaders = [("User-Agent","Mozilla/5.0 (Macintosh; Intel Mac OS X 10_5_8) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.90 Safari/537.1")] br.open(urlLogIn) br.select_form(nr=0) print br.form br.form[bf_username_name] = bf_username br.form[bf_password_name] = bf_password print br.form #just to check username and psw have been recorded correctly responseSubmit = br.submit() response = br.open(accountUrl) text_file = open("LogInResponse.html", "w") text_file.write(responseSubmit.read()) #this file should show the home page with me logged in, but it show home page as if I was not logged it text_file.close() text_file = open("Account.html", "w") text_file.write(response.read()) #this file should show my account page, but it should a pop up with an error text_file.close()

  Read the article

• Lighttpd 403 Errors on HTML and PHP pages

  - by Brian

  I installed lighttpd on CentOS 5.5 64-bit. Everything seems fine and running except I cannot get past 403 errors on both HTML and PHP pages. I have used CHMOD and CHOWN, changed ownership in the config file, done everything possible and have been stuck for 2 days. Appreciate any help, and here's hoping to a stupid error on my part. Here is the log file with debug options on: 2011-02-21 11:23:13: (request.c.304) fd: 7 request-len: 408 GET /index.html HTTP/1.1 Host: 10.0.1.8 User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive Cache-Control: max-age=0 2011-02-21 11:23:13: (response.c.241) run condition 2011-02-21 11:23:13: (response.c.300) -- splitting Request-URI 2011-02-21 11:23:13: (response.c.301) Request-URI : /index.html 2011-02-21 11:23:13: (response.c.302) URI-scheme : http 2011-02-21 11:23:13: (response.c.303) URI-authority: 10.0.1.8 2011-02-21 11:23:13: (response.c.304) URI-path : /index.html 2011-02-21 11:23:13: (response.c.305) URI-query : 2011-02-21 11:23:13: (response.c.349) -- sanatising URI 2011-02-21 11:23:13: (response.c.350) URI-path : /index.html 2011-02-21 11:23:13: (response.c.470) -- before doc_root 2011-02-21 11:23:13: (response.c.471) Doc-Root : /srv/www/lighttpd 2011-02-21 11:23:13: (response.c.472) Rel-Path : /index.html 2011-02-21 11:23:13: (response.c.473) Path : 2011-02-21 11:23:13: (response.c.521) -- after doc_root 2011-02-21 11:23:13: (response.c.522) Doc-Root : /srv/www/lighttpd 2011-02-21 11:23:13: (response.c.523) Rel-Path : /index.html 2011-02-21 11:23:13: (response.c.524) Path : /srv/www/lighttpd/index.html 2011-02-21 11:23:13: (response.c.541) -- logical -> physical 2011-02-21 11:23:13: (response.c.542) Doc-Root : /srv/www/lighttpd 2011-02-21 11:23:13: (response.c.543) Rel-Path : /index.html 2011-02-21 11:23:13: (response.c.544) Path : /srv/www/lighttpd/index.html 2011-02-21 11:23:13: (response.c.561) -- handling physical path 2011-02-21 11:23:13: (response.c.562) Path : /srv/www/lighttpd/index.html 2011-02-21 11:23:13: (response.c.608) -- access denied 2011-02-21 11:23:13: (response.c.609) Path : /srv/www/lighttpd/index.html 2011-02-21 11:23:13: (response.c.128) Response-Header: HTTP/1.1 403 Forbidden Content-Type: text/html Content-Length: 345 Date: Mon, 21 Feb 2011 16:23:13 GMT Server: lighttpd/1.4.28 Here is the directory listing. I used CHOWN to set to lighttpd:lighttpd [root@localhost lighttpd]# ls -al total 40 drwxrwxrwx 2 lighttpd lighttpd 4096 Feb 21 10:48 . drwxrwxrwx 3 lighttpd lighttpd 4096 Feb 21 10:57 .. -rwxrwxrwx 1 lighttpd lighttpd 10 Feb 20 08:32 index.html -rwxrwxrwx 1 lighttpd lighttpd 20 Feb 21 10:48 index.php -rwxrwxrwx 1 lighttpd lighttpd 20 Feb 21 10:39 info.php [root@localhost lighttpd]# Requested Commands: [root@localhost lighttpd]# ls -ld / /srv /srv/www drwxr-xr-x 22 root root 4096 Feb 21 04:39 / drwxrwxrwx 3 lighttpd lighttpd 4096 Feb 20 07:38 /srv drwxrwxrwx 3 lighttpd lighttpd 4096 Feb 21 10:57 /srv/www [root@localhost lighttpd]# ps auxZ | grep lighttpd root:system_r:httpd_t lighttpd 3842 0.0 0.2 48368 896 ? S 12:24 0:00 /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf root:system_r:unconfined_t:SystemLow-SystemHigh root 3845 0.0 0.2 61152 764 pts/0 R+ 12:24 0:00 grep lighttpd

  Read the article

• How can Windows XP/7 users cleanly connect to Mac OS X Server 10.9.4 Mavericks with Active Directory integration?

  - by JakeGould

  I’m a Linux/Unix systems admin who also manages a Macintosh server infrastructure & there is a lone Mac Mini in the mix running 10.9.4 that I would like Windows XP & Windows 7 users to connect to with little or no hassle. The problem? Windows users can’t seem to even get to the point of a password prompt yet connect. Mind you this server replaced a Mac OS X 10.6.8 server that had issues, but never had issues with Windows users connected. The gist of this post is: The tons of different messages out there about Mac OS X 10.9.4 Samba support are mind-numbingly confusing. Can anyone share some solid specifics here? I’ve read pieces like this one here that suggest turning off file sharing & then adding a share with AFP/SMB enabled would work. But the suggestion seems to apply to 10.8. And from what I know a lot has changed in Samba support in 10.9 let alone the iterations to 10.9.4. Then I found this great tutorial here that explains things step-by-step. Which seems like it should work, but the problem is the example given applies to a local user created on the Mac when I would like users in an Active Directory group—which the Mac is bound to—access the Mac Mini shares. There are also tons of great tips here on MacWindows.com but nothing seems solid to the issue I am facing. So from what I am reading these are my options: Local User Versus Active Directory: Setup a common local user on the Mac OS X 10.9.4 server to be used for Samba sharing since Active Directory won’t work. Is this really the case? Because loss of AD integration is a major pain. Do Extended File Attributes Get Retained from Windows Users: If this were to work, how do extended attributes come into play? Loss of metadata & related info is not an option. How Fragile is Any of this to Updates: How does any of this shake out with Mac OS X updates as well as Windows updates? Installing Official, Open Source Samba: Would upgrading the Samba install on the server to the official open source Samba via a package like SMBUp or via the Hombrew method described here help or make the issue worse? I fully understand there have historically been issues in mixed environments, but nowadays Windows users connecting to a Mac seem to have a truly hellish road ahead of them. Unless I am missing something?

  Read the article

• Tomcat with virtual hosts - 404

  - by Thardas

  I have a CentOS 5.2 server set up with Apache 2.2.3 and Tomcat 5.5.27. The server hosts multiple virtual hosts connected to multiple Tomcats. For instance we have one tomcat for development and testing and one tomcat for production. project.demo.us.com points to dev tomcat and project.us.com points to production tomcat. Here's the virtual host's configuration: <VirtualHost *:80> ServerName project.demo.us.com CustomLog logs/project.demo.us.com/access_log combined env=!VLOG ErrorLog logs/project.demo.us.com/error_log DocumentRoot /var/www/vhosts/project.demo.us.com <Directory /var/www/vhosts/project.demo.us.com> Allow from all AllowOverride All Options -Indexes FollowSymLinks </Directory> ########## ########## ########## JkMount /project/* online </VirtualHost> JkMount line defines that we use online worker and our workers.properties contains this: worker.list=..., online, ... worker.online.port=7703 worker.online.host=localhost worker.online.type=ajp13 worker.online.lbfactor=1 And tomcat's conf/server.xml contains: <Connector port="7703" enableLookups="false" redirectPort="8443" protocol="AJP/1.3" URIEncoding="UTF-8" maxThreads="80" minSpareThreads="10" maxSpareThreads="15"/> I'm not sure what redirectPort is but I tried to telnet to that port and there's no one answering, so it shouldn't matter? Tomcat's webapps directory contains project.war and the server automatically deployed it under project directory which contains index.jsp and hello.html. The latter is for static debugging purposes. Now when I try to access http://project.demo.us.com/project/index.jsp, I get Tomcat's HTTP Status 404 - The requested resource () is not available. The same thing happens to hello.html so it's not working with static content either. Apache's access_log contains: 88.112.152.31 - - [10/Aug/2009:12:15:14 +0300] "GET /demo/index.jsp HTTP/1.1" 404 952 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2" I couldn't find any mention of the request in Tomcat's logs. If I shutdown this specific tomcat, I no longer get Tomcat's 404 but Apache's 503 Service Temporarily Unavailable, so I should be configuring the correct Tomcat. Is there something obvious that I'm missing? Is there any place where I could find out what path the Tomcat is using to look for requested files?

  Read the article

• Passenger 2.2.4, nginx 0.7.61 and SSL

  - by boompa

  Has anyone had any luck configuring Passenger and nginx with SSL? I've spent hours trying to get this configuration working as I'd like, using what few resources there are out there on the net, and I can't get any of the supposedly forwarded headers to show up in the Rails controller. For example, with a conf file of the following (and multiple variations thereof): server { listen 3000; server_name .example.com; root /Users/website/public; passenger_enabled on; rails_env development; } server { listen 3443; root /Users/website/public; rails_env development; passenger_enabled on; ssl on; #ssl_verify_client on; ssl_certificate /Users/website/ssl/server.crt; ssl_certificate_key /Users/website/ssl/server.key; #ssl_client_certificate /Users/website/ssl/CA.crt; ssl_session_timeout 5m; ssl_protocols SSLv3 TLSv1; ssl_ciphers ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X_FORWARDED_PROTO https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; #proxy_set_header X-SSL-Subject $ssl_client_s_dn; #proxy_set_header X-SSL-Issuer $ssl_client_i_dn; proxy_redirect off; proxy_max_temp_file_size 0; } and Rails code in the controller like this: request.headers.each { |k, v| RAILS_DEFAULT_LOGGER.error "Header #{k} Val #{v}" } other headers appear, but not those set in nginx, e.g.: Header rack.multithread Val false Header REQUEST_URI Val /login/new Header REMOTE_PORT Val 64021 Header rack.multiprocess Val true Header PASSENGER_USE_GLOBAL_QUEUE Val false Header PASSENGER_APP_TYPE Val rails Header SCGI Val 1 Header SERVER_PORT Val 3443 Header HTTP_ACCEPT_CHARSET Val ISO-8859-1,utf-8;q=0.7,*;q=0.7 Header rack.request.query_hash Val Header DOCUMENT_ROOT Val /Users/website/public I've even gone so far as to modify Passenger's abstract_request_handler's main_loop method, i.e., headers, input = parse_request(client) if headers if headers[REQUEST_METHOD] == PING process_ping(headers, input, client) else headers.each { |h,v| log.unknown "abstract_request_handler: #{h} = #{v}" } process_request(headers, input, client) end end only to find that the supposedly added headers do not exist there either: abstract_request_handler: HTTP_KEEP_ALIVE = 300 abstract_request_handler: HTTP_USER_AGENT = Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:1.9.1) Gecko/20090624 Firefox/3.5 abstract_request_handler: PASSENGER_SPAWN_METHOD = smart-lv2 abstract_request_handler: CONTENT_LENGTH = 0 abstract_request_handler: HTTP_IF_NONE_MATCH = "b6e8b9afbc1110ee3bf0c87e119252ad" abstract_request_handler: HTTP_ACCEPT_LANGUAGE = en-us,en;q=0.5 abstract_request_handler: SERVER_PROTOCOL = HTTP/1.1 abstract_request_handler: HTTPS = on abstract_request_handler: REMOTE_ADDR = 127.0.0.1 abstract_request_handler: SERVER_SOFTWARE = nginx/0.7.61 abstract_request_handler: SERVER_ADDR = 127.0.0.1 abstract_request_handler: SCRIPT_NAME = abstract_request_handler: PASSENGER_ENVIRONMENT = development abstract_request_handler: REMOTE_PORT = 64021 abstract_request_handler: REQUEST_URI = /login/new abstract_request_handler: HTTP_ACCEPT_CHARSET = ISO-8859-1,utf-8;q=0.7,*;q=0.7 abstract_request_handler: SERVER_PORT = 3443 abstract_request_handler: SCGI = 1 abstract_request_handler: PASSENGER_APP_TYPE = rails abstract_request_handler: PASSENGER_USE_GLOBAL_QUEUE = false I'm tired of banging my head against the wall, so I'd truly appreciate any help I can get!

  Read the article

• How to Share Files Between User Accounts on Windows, Linux, or OS X

  - by Chris Hoffman

  Your operating system provides each user account with its own folders when you set up several different user accounts on the same computer. Shared folders allow you to share files between user accounts. This process works similarly on Windows, Linux, and Mac OS X. These are all powerful multi-user operating systems with similar folder and file permission systems. Windows On Windows, the “Public” user’s folders are accessible to all users. You’ll find this folder under C:\Users\Public by default. Files you place in any of these folders will be accessible to other users, so it’s a good way to share music, videos, and other types of files between users on the same computer. Windows even adds these folders to each user’s libraries by default. For example, a user’s Music library contains the user’s music folder under C:\Users\NAME\as well as the public music folder under C:\Users\Public\. This makes it easy for each user to find the shared, public files. It also makes it easy to make a file public — just drag and drop a file from the user-specific folder to the public folder in the library. Libraries are hidden by default on Windows 8.1, so you’ll have to unhide them to do this. These Public folders can also be used to share folders publically on the local network. You’ll find the Public folder sharing option under Advanced sharing settings in the Network and Sharing Control Panel. You could also choose to make any folder shared between users, but this will require messing with folder permissions in Windows. To do this, right-click a folder anywhere in the file system and select Properties. Use the options on the Security tab to change the folder’s permissions and make it accessible to different user accounts. You’ll need administrator access to do this. Linux This is a bit more complicated on Linux, as typical Linux distributions don’t come with a special user folder all users have read-write access to. The Public folder on Ubuntu is for sharing files between computers on a network. You can use Linux’s permissions system to give other user accounts read or read-write access to specific folders. The process below is for Ubuntu 14.04, but it should be identical on any other Linux distribution using GNOME with the Nautilus file manager. It should be similar for other desktop environments, too. Locate the folder you want to make accessible to other users, right-click it, and select Properties. On the Permissions tab, give “Others” the “Create and delete files” permission. Click the Change Permissions for Enclosed Files button and give “Others” the “Read and write” and “Create and Delete Files” permissions. Other users on the same computer will then have read and write access to your folder. They’ll find it under /home/YOURNAME/folder under Computer. To speed things up, they can create a link or bookmark to the folder so they always have easy access to it. Mac OS X Mac OS X creates a special Shared folder that all user accounts have access to. This folder is intended for sharing files between different user accounts. It’s located at /Users/Shared. To access it, open the Finder and click Go > Computer. Navigate to Macintosh HD > Users > Shared. Files you place in this folder can be accessed by any user account on your Mac. These tricks are useful if you’re sharing a computer with other people and you all have your own user accounts — maybe your kids have their own limited accounts. You can share a music library, downloads folder, picture archive, videos, documents, or anything else you like without keeping duplicate copies.

  Read the article

• PHP script works fine until I send a parameter from HTTPService in Flash Builder 4?

  - by ben

  I'm using a PHP script to read an RSS feed in my Flex 4 app. The script works when I put the url of the feed in the actual script, but I can't get it to work when I try to send the URL as a parameter from a HTTPService in Flex. Can anyone tell me what I'm doing wrong? Here is the HTTPService from Flex 4 that I'm using: <mx:HTTPService url="http://talk.6te.net/proxy.php" id="proxyService" method="POST" result="rssResult()" fault="rssFault()"> <mx:request> <url> http://feeds.feedburner.com/nah_right </url> </mx:request> </mx:HTTPService> This is the script that works: <?php $ch = curl_init(); $timeout = 30; $userAgent = $_SERVER['HTTP_USER_AGENT']; curl_setopt($ch, CURLOPT_URL, "http://feeds.feedburner.com/nah_right"); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, $timeout); curl_setopt($ch, CURLOPT_USERAGENT, $userAgent); $response = curl_exec($ch); if (curl_errno($ch)) { echo curl_error($ch); } else { curl_close($ch); echo $response; } ?> But this is what I actually want to use, but it doesn't work: <?php $ch = curl_init(); $timeout = 30; $userAgent = $_SERVER['HTTP_USER_AGENT']; curl_setopt($ch, CURLOPT_URL, $_REQUEST['url']); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, $timeout); curl_setopt($ch, CURLOPT_USERAGENT, $userAgent); $response = curl_exec($ch); if (curl_errno($ch)) { echo curl_error($ch); } else { curl_close($ch); echo $response; } ?> Here is the request and response output of the HTTPService from the network monitor in Flash Builder 4 (using the PHP script that doesn't work): Request: POST /proxy.php HTTP/1.1 Host: talk.6te.net User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Content-type: application/x-www-form-urlencoded Content-length: 97 url=%0A%09%09%09%09%09http%3A%2F%2Ffeeds%2Efeedburner%2Ecom%2Fnah%5Fright%0A%20%20%20%20%09%09%09 Response: HTTP/1.1 200 OK Date: Mon, 10 May 2010 03:23:27 GMT Server: Apache X-Powered-By: PHP/5.2.13 Content-Length: 15 Content-Type: text/html <url> malformed I've tried putting the URL in " " in the HTTPService, but that didn't do anything. Any help would be greatly appreciated!

  Read the article

• PHP script works fine until I send it a parameter from HTTPService in Flash Builder 4?

  - by ben

  I'm using a PHP script to read an RSS feed in my Flex 4 app. The script works when I put the url of the feed in the actual script, but I can't get it to work when I try to send the URL as a parameter from a HTTPService in Flex. Can anyone tell me what I'm doing wrong? Here is the HTTPService from Flex 4 that I'm using: <mx:HTTPService url="http://talk.6te.net/proxy.php" id="proxyService" method="POST" result="rssResult()" fault="rssFault()"> <mx:request> <url> http://feeds.feedburner.com/nah_right </url> </mx:request> </mx:HTTPService> This is the script that works: <?php $ch = curl_init(); $timeout = 30; $userAgent = $_SERVER['HTTP_USER_AGENT']; curl_setopt($ch, CURLOPT_URL, "http://feeds.feedburner.com/nah_right"); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, $timeout); curl_setopt($ch, CURLOPT_USERAGENT, $userAgent); $response = curl_exec($ch); if (curl_errno($ch)) { echo curl_error($ch); } else { curl_close($ch); echo $response; } ?> But this is what I actually want to use, but it doesn't work: <?php $ch = curl_init(); $timeout = 30; $userAgent = $_SERVER['HTTP_USER_AGENT']; curl_setopt($ch, CURLOPT_URL, $_REQUEST['url']); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, $timeout); curl_setopt($ch, CURLOPT_USERAGENT, $userAgent); $response = curl_exec($ch); if (curl_errno($ch)) { echo curl_error($ch); } else { curl_close($ch); echo $response; } ?> Here is the request and response output of the HTTPService from the network monitor in Flash Builder 4 (using the PHP script that doesn't work): Request: POST /proxy.php HTTP/1.1 Host: talk.6te.net User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Content-type: application/x-www-form-urlencoded Content-length: 97 url=%0A%09%09%09%09%09http%3A%2F%2Ffeeds%2Efeedburner%2Ecom%2Fnah%5Fright%0A%20%20%20%20%09%09%09 Response: HTTP/1.1 200 OK Date: Mon, 10 May 2010 03:23:27 GMT Server: Apache X-Powered-By: PHP/5.2.13 Content-Length: 15 Content-Type: text/html <url> malformed I've tried putting the URL in " " in the HTTPService, but that didn't do anything. Any help would be greatly appreciated!

  Read the article

• Is there a programming language with be semantics close to English ?

  - by ivo s

  Most languages allow to 'tweek' to certain extend parts of the syntax (C++,C#) and/or semantics that you will be using in your code (Katahdin, lua). But I have not heard of a language that can just completely define how your code will look like. So isn't there some language which already exists that has such capabilities to override all syntax & define semantics ? Example of what I want to do is basically from the C# code below: foreach(Fruit fruit in Fruits) { if(fruit is Apple) { fruit.Price = fruit.Price/2; } } I want do be able to to write the above code in my perfect language like this: Check if any fruits are Macintosh apples and discount the price by 50%. The advantages that come to my mind looking from a coder's perspective in this "imaginary" language are: It's very clear what is going on (self descriptive) - it's plain English after all even kid would understand my program Hides all complexities which I have to write in C#. But why should I care to learn that if statements, arithmetic operators etc since there are already implemented The disadvantages that I see for a coder who will maintain this program are: Maybe you would express this program differently from me so you may not get all the information that I've expressed in my sentence Programs can be quite verbose and hard to debug but if possible to even proximate this type of syntax above maybe more people would start programming right? That would be amazing I think. I can go to work and just write an essay to draw a square on a winform like this: Create a form called MyGreetingForm. Draw a square with in the middle of MyGreetingFormwith a side of 100 points. In the middle of the square write "Hello! Click here to continue" in Arial font. In the above code the parser must basically guess that I want to use the unnamed square from the previous sentence, it'd be hard to write such a smart parser I guess, yet it's so simple what I want to do. If the user clicks on square in the middle of MyGreetingForm show MyMainForm. In the above code 'basically' the compiler must: 1)generate an event handler 2) check if there is any square in the middle of the form and if there is - 3) hide the form and show another form It looks very hard to do but it doesn't look impossible IMO to me at least approximate this (I can personally generate a parser to perform the 3 steps above np & it's basically the same that it has to do any way when you add even in c# a.MyEvent=+handler; so I don't see a problem here) so I'm thinking maybe somebody already did something like this ? Or is there some practical burden of complexity to create such a 'essay style' programming language which I can't see ? I mean what's the worse that can happen if the parser is not that good? - your program will crash so you have to re-word it:)

  Read the article

• NSUrlconnection problem receiving data from some filehosts

  - by Tammo

  hello again, i am trying to develop an downloadmanager. i can now download files from almost anywhere on linkclick. in the - (BOOL)webView:(UIWebView*)webView shouldStartLoadWithRequest:(NSURLRequest*)request navigationType:(UIWebViewNavigationType)navigationType i check if the url is a url to a binaryfile like a zipfile. than i setup a nsurlconnection NSMutableURLRequest *urlRequest = [NSMutableURLRequest requestWithURL:url cachePolicy:NSURLRequestReloadIgnoringLocalCacheData timeoutInterval:20.0]; [urlRequest setValue:@"User-Agent" forHTTPHeaderField:@"Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en) AppleWebKit/418.9 (KHTML, like Gecko) Safari/419.3"]; NSURLConnection *mainConnection = [NSURLConnection connectionWithRequest:urlRequest delegate:self]; if (nil == mainConnection) { NSLog(@"Could not create the NSURLConnection object"); } (void)connection:(NSURLConnection )connection didReceiveResponse:(NSURLResponse)response { self.tabBarController.selectedIndex=1; [receivedData setLength:0]; percent = 0; localFilename = [[[url2 absoluteString] lastPathComponent] copy]; NSLog(localFilename); NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDirectory = [paths objectAtIndex:0] ; NSString *appFile = [documentsDirectory stringByAppendingPathComponent:localFilename]; [[NSFileManager defaultManager] createFileAtPath:appFile contents:nil attributes:nil]; [downloadname setHidden:NO]; [downloadname setText:localFilename]; expectedBytes = [response expectedContentLength]; exp = [response expectedContentLength]; NSLog(@"content-length: %lli Bytes", expectedBytes); file = [[NSFileHandle fileHandleForUpdatingAtPath:appFile] retain]; if (file) { [file seekToEndOfFile]; } } (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data { if (file) { [file seekToEndOfFile]; } [file writeData:data]; [receivedData appendData:data]; long long resourceLength = [receivedData length]; float res = [receivedData length]; percent = res/exp; [progress setHidden:NO]; [progress setProgress:percent]; NSLog(@"Remaining: %lli KB", (expectedBytes-resourceLength)/1024); [kbleft setHidden:NO]; [kbleft setText:[NSString stringWithFormat:@"%lli / %lli KB", expectedBytes/1024 ,(resourceLength)/1024]]; } in the connectiondidfinish loading i close the file. all working fine for nearly every hoster except hosters wich have a capture procedure before like filedude.com in the uiwebview i can surf to the downloadpage enter the captcha and get the downloadlink. when i click on it the file will be created in the documentsdir with the filename and the download starts but he dont get any data. every file has 0kb and the NSLog(@"content-length: %lli Bytes", expectedBytes); gives out something like 100-400 byte . can somebody help me solve this problem? kind regards

  Read the article

• Permissions restoring from Time Machine - Finder copy vs "cp" copy

  - by Ben Challenor

  Note: this question was starting to sprawl so I rewrote it. I have a folder that I'm trying to restore from a Time Machine backup. Using cp -R works fine, but certain folders cannot be restored with either the Time Machine UI or Finder. Other users have reported similar errors and the cp -R workaround was suggested (e.g. Restoring from Time Machine - Permissions Error). But I wanted to understand: Why cp -R works when the Finder and the Time Machine UI do not. Whether I could prevent the errors by changing file permissions before the backup. There do indeed seem to be some permissions that Finder works with and some that it does not. I've narrowed the errors down to folders with the user ben (that's me) and the group wheel. Here's a simplified reproduction. I have four folders with the owner/group combinations I've seen so far: ben ~/Desktop/test $ ls -lea total 16 drwxr-xr-x 7 ben staff 238 27 Nov 14:31 . drwx------+ 17 ben staff 578 27 Nov 14:29 .. 0: group:everyone deny delete -rw-r--r--@ 1 ben staff 6148 27 Nov 14:31 .DS_Store drwxr-xr-x 3 ben staff 102 27 Nov 14:30 ben-staff drwxr-xr-x 3 ben wheel 102 27 Nov 14:30 ben-wheel drwxr-xr-x 3 root admin 102 27 Nov 14:31 root-admin drwxr-xr-x 3 root wheel 102 27 Nov 14:31 root-wheel Each contains a single file called file with the same owner/group: ben ~/Desktop/test $ cd ben-staff ben ~/Desktop/test/ben-staff $ ls -lea total 0 drwxr-xr-x 3 ben staff 102 27 Nov 14:30 . drwxr-xr-x 7 ben staff 238 27 Nov 14:31 .. -rw-r--r-- 1 ben staff 0 27 Nov 14:30 file In the backup, they look like this: ben /Volumes/Deimos/Backups.backupdb/Ben’s MacBook Air/Latest/Macintosh HD/Users/ben/Desktop/test $ ls -leA total 16 -rw-r--r--@ 1 ben staff 6148 27 Nov 14:34 .DS_Store 0: group:everyone deny write,delete,append,writeattr,writeextattr,chown drwxr-xr-x@ 3 ben staff 102 27 Nov 14:51 ben-staff 0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown drwxr-xr-x@ 3 ben wheel 102 27 Nov 14:51 ben-wheel 0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown drwxr-xr-x@ 3 root admin 102 27 Nov 14:52 root-admin 0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown drwxr-xr-x@ 3 root wheel 102 27 Nov 14:52 root-wheel 0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown Of these, ben-staff can be restored with Finder without errors. root-wheel and root-admin ask for my password and then restore without errors. But ben-wheel does not prompt for my password and gives the error: The operation can’t be completed because you don’t have permission to access “file”. Interestingly, I can restore the file from this folder by dragging it directly to my local drive (instead of dragging its parent folder), but when I do so its permissions are changed to ben/staff. Here are the permissions after the restore for the three folders that worked correctly, and the file from ben-wheel that was changed to ben/staff. ben ~/Desktop/test-restore $ ls -leA total 16 -rw-r--r--@ 1 ben staff 6148 27 Nov 14:46 .DS_Store drwxr-xr-x 3 ben staff 102 27 Nov 14:30 ben-staff -rw-r--r-- 1 ben staff 0 27 Nov 14:30 file drwxr-xr-x 3 root admin 102 27 Nov 14:31 root-admin drwxr-xr-x 3 root wheel 102 27 Nov 14:31 root-wheel Can anyone explain this behaviour? Why do Finder and the Time Machine UI break with the ben / wheel permissions? And why does cp -R work (even without sudo)?

  Read the article

• New OFM versions released SOA Suite 11.1.1.4 &amp; BPM 11.1.1.4 &amp; JDeveloper 11.1.1.4 WebLogic on JRockit 10.3.4 feedback from the community

  - by Jürgen Kress

  Oracle SOA Suite 11g Installations This is the latest release of the Oracle SOA Suite 11g. Please see the Documentation tab for Release Notes, Installation Guides and other release specific information. Please also see the List of New Features and Samples provided for this release. Release 11gR1 (11.1.1.4.0) Microsoft Windows (32-bit JVM) Linux (32-bit JVM) Generic Oracle JDeveloper 11g Rel 1 (11.1.1.x) (JDeveloper + ADF) Integrated development environment certified on Windows, Linux, and Macintosh. License is free (read the Pricing FAQ). Studio Edition for Windows (1.2 GB) | Studio Edition for Linux (1.3 GB) | See All See Additional Development Tools Oracle WebLogic Server 11g Rel 1 (10.3.4) Installers The WebLogic Server installers include Oracle Coherence and Oracle Enterprise Pack for Eclipse and supports development with other Fusion Middleware products . The zip includes WebLogic Server only and is intended for WebLogic Server development only. Linux x86 (1.1 GB) | Windows x86 (1 GB) Zip for Windows x86, Linux x86, Mac OS X (316 MB) | See All Oracle WebLogic Server 11gR1 (10.3.4) on JRockit Virtual Edition Download For additional downloads please visit the Oracle Fusion Middleware Products Update Center Share your feedback with the @soacommunity on twitter SOASimone Simone Geib SOA Suite 11gR1 (11.1.1.4.0) has just been released: http://www.oracle.com/technetwork/middleware/soasuite/downloads/index.html gschmutz gschmutz My new blog post: WebLogic Server, JDev, SOA, BPM, OSB and CEP 11.1.1.4 (PS3) available! - http://tinyurl.com/4negnpn simon_haslam Simon Haslam I'm very pleased to see WLS 10.3.4 for JRockit VE launched at the same time as the rest of PS3 http://j.mp/gl1nQm (32bit anyway) lucasjellema Lucas Jellema See http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/156082.xml for PS3 extension downloads BPM, SOA Editor, WebCenter demed demed List of new features in @OracleSOA 11gR1 PS3: http://bit.ly/fVRwsP is not extremely long but huge release by # of bugs fixed. Go! biemond Edwin Biemond WebLogic 10.3.4 new features http://bit.ly/f7L1Eu Exalogic Elastic Cloud , JPA2 , Maven plugin, OWSM policies on WebLogic SCA applications JDeveloper JDeveloper & ADF JDeveloper and Oracle ADF 11g Release 1 Patch Set 3 (11.1.1.4.0): New Features and Bug Fixes http://bit.ly/feghnY simon_haslam Simon Haslam WebLogic Server 10.3.4 (i.e. 11gR1 PS3) available now too http://bit.ly/eeysZ2 JDeveloper JDeveloper & ADF Share your impressions on the new JDeveloper 11g Patchset 3 release that came out today! Download it here: http://bit.ly/dogRN8 VikasAatOracle Vikas Anand SOA Suite 11gR1PS3 is Hotpluggable ...see list of features that @Demed posted..#soa #soacommunity   New versions of Oracle Fusion Middleware 11g R1 (11.1.1.4.x)  include: Oracle WebLogic Server 11g R1 (10.3.4) Oracle SOA Suite 11g R1 (11.1.1.4.0) Oracle Business Process Management 11g R1 (11.1.1.4.0) Oracle Complex Event Processing 11g R1 (11.1.1.4.0) Oracle Application Integration Architecture Foundation Pack 11g R1 (11.1.1.4.0) Oracle Service Bus 11g R1 (11.1.1.4.0) Oracle Enterprise Repository 11g R1 (11.1.1.4.0) Oracle Identity Management 11g R1 (11.1.1.4.0) Oracle Enterprise Content Management 11g R1 (11.1.1.4.0) Oracle WebCenter 11g R1 (11.1.1.4.0) - coming soon Oracle Forms, Reports, Portal & Discoverer 11g R1 (11.1.1.4.0) Oracle Repository Creation Utility 11g R1 (11.1.1.4.0) Oracle JDeveloper & Application Development Runtime 11g R1 (11.1.1.4.0) Resources Download  (OTN) Certification Documentation   New Features in Oracle SOA Suite 11g Release 1 (11.1.1.4.0) Updated: January, 2011 Go to Oracle SOA Suite 11g Doc Introduction Oracle SOA Suite 11gR1 (11.1.1.4.0) includes both bug fixes as well as new features listed below - click on the title of each feature for more details. Downloads, documentation links and more information on the Oracle SOA Suite available on the SOA Suite OTN page and as always, we welcome your feedback on the SOA OTN forum. New in Oracle SOA Suite in this release BPEL Component BPEL 2.0 support in JDeveloper The BPEL editor in JDeveloper now generates BPEL 2.0 code and introduces several new activities. Augmented XML variables auto-initialization capabilities The XML variable auto-initialization capabilities have been enhanced to support two need additional use cases: to initialize the to-spec node if it doesn't exist during the rule and to initialize array elements. New Assign Activity dialog The new Assign Activity supports the same drag & drop paradigm used for the XSLT mapper, greatly streamlining the task of assigning multiple variables. Mediator Component Time window parameter for the resequencer This new parameter lets users initiate a best-effort resequencing based on a time window rather than a number of messages. Support for attachments in the Mediator assign dialog The Mediator assign dialog now supports attachment, enabling usage of the Mediator to transmit attachments even if source and target schemas are different. Adapters & Bindings ChunkSize property added to the File Adapter header properties The ChunkSize property of the File Adapter is now available as a header property, allowing in-process modification of the value for this property. Improved support for distributed WLS JMS topics though automatic rebalancing of listeners The JMS Adapter has been enhanced to subscribe to administrative events from WLS JMS. Based on these events, it dynamically rebalances listeners when there are changes to the members of a local or remote WLS JMS distributed destination. JDeveloper configuration wizard for custom JCA adapters A new wizard is available in JDeveloper to configure custom-built adapters Administration & Enterprise Manager Enhanced purging capabilities to manage database growth Historical instance data can now be purged using three different strategies: batch script, scheduled batch script or data partitioning. Asynchronous bulk instance deletion in Enterprise Manager Bulk deletion of instances in Enterprise Manager now executes as an asynchronous operation in Enterprise Manager, returning control to the user as soon as the action has been submitted and acknowledged. B2B Ability to schedule partner downtime This feature allows trading partners to notify each other about planned downtime and to delay delivery of messages during that period. Message sequencing B2B now supports both inbound and outbound message sequencing. Simplified BAM integration with B2B B2B ships with various pre-configured artifacts to simplify monitoring in BAM. Instance Message Java API for B2B The new instance message Java API supports programmatic access to B2B instance message data. Oracle Service Bus (OSB) Certification of the File and FTP JCA Adapters The File and FTP JCA adapters are now certified for use with Oracle Service Bus (in addition to the native transports). Security enhancements Oracle Service Bus now supports SAML 2.0 as well as the OWSM authorization policies. Check the Oracle Service Bus 11.1.1.4 Release Notes for a complete list of new features. Installation, Hot-Pluggability & Certifications Ability to run Oracle SOA Suite on IBM WebSphere Application Server Oracle SOA Suite can now be deployed on IBM WebSphere Application Server Network Deployment (ND) 7.0.11 and IBM WebSphere Application Server 7.0.11. Single JVM developer installation template Oracle SOA Suite can now be targeted to the WebLogic admin server - there is no requirement to also have a managed server. This topology is intended to minimize the memory foorprint of development environments. This is in addition to the list of supported browsers, operating systems and databases already certified in prior releases. Complex Event Processing (CEP) IDE enhancements This release introduces several enhancements to the development IDE, such as adapter wizards and event-type repository. CQL enhancements CQL enhancements include JDBC data cartridges and parametrized queries. Tracing and injecting events in the Event Processing Network (EPN) In the development environment you can now trace and inject events. Check the Oracle CEP 11.1.1.4 Release Notes for a complete list of new features. SOA Suite page on OTN For more information on SOA Specialization and the SOA Partner Community please feel free to register at www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Wiki Website Technorati Tags: SOA Suite 11.1.1.4,JDeveloper 11.1.1.4,WebLogic 10.3.4,JRockit 10.3.4,SOA Community,Oracle,OPN,SOA,Simone Geib,Guido Schmutz,Edwin Biemond,Lucas Jellema,Simon Haslam,Demed,Vikas Anand,Jürgen Kress

  Read the article

< Previous Page | 4 5 6 7 8 9  | Next Page >