Search Results

Search found 983 results on 40 pages for 'medical health'.

Page 8/40 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • Platformer Collision Error [closed]

    - by Connor
    I am currently working on a relatively simple platform game that has an odd bug.You start the game by falling onto the ground (you spawn a few blocks above the ground), but when you land your feet get stuck INSIDE the world and you can't move until you jump. Here's what I mean: The player's feet are a few pixels below the ground level. However, this problem only occurs in 3 places throughout the map and only in those 3 select places. I'm assuming that the problem lies within my collision detection code but I'm not entirely sure, as I don't get an error when it happens. public boolean isCollidingWithBlock(Point pt1, Point pt2) { //Checks x for(int x = (int) (this.x / Tile.tileSize); x < (int) (this.x / Tile.tileSize + 4); x++) { //Checks y for(int y = (int) (this.y / Tile.tileSize); y < (int) (this.y / Tile.tileSize + 4); y++) { if(x >= 0 && y >= 0 && x < Component.dungeon.block.length && y < Component.dungeon.block[0].length) { //If the block is not air if(Component.dungeon.block[x][y].id != Tile.air) { //If the player is in contact with point one or two on the block if(Component.dungeon.block[x][y].contains(pt1) || Component.dungeon.block[x][y].contains(pt2)) { //Checks for specific blocks if(Component.dungeon.block[x][y].id == Tile.portalBlock) { Component.isLevelDone = true; } if(Component.dungeon.block[x][y].id == Tile.spike) { Health.health -= 1; Component.isJumping = true; if(Health.health == 0) { Component.isDead = true; } } return true; } } } } } return false; } What I'm asking is how I would fix the problem. I've looked over my code for quite a while and I'm not sure what's wrong with it. Also, if there's a more efficient way to do my collision checking then please let me know! I hope that is enough information, if it's not just tell me what you need and I'll be sure to add it. Thank you! [EDIT] Jump code: if(!isJumping && !isCollidingWithBlock(new Point((int) x + 2, (int) (y + height)), new Point((int) (x + width + 2), (int) (y + height)))) { y += fallSpeed; //sY is the screen's Y. The game is a side-scroller Component.sY += fallSpeed; } else { if(Component.isJumping) { isJumping = true; } } if(isJumping) { if(!isCollidingWithBlock(new Point((int) x + 2, (int) y), new Point((int) (x + width + 2), (int) y))) { if(jumpCount >= jumpHeight) { isJumping = false; jumpCount = 0; } else { y -= jumpSpeed; Component.sY -= jumpSpeed; jumpCount += 1; } } else { isJumping = false; jumpCount = 0; } }

    Read the article

  • Add a whole dictionary to Android

    - by SaulBack
    I want to add an entire medical dictionary to my android (Moto Droid). I would like to be able to send text messages and have the medical words be in the predictable text. Is it possilbe? Is there an app to accomplish this? My friends Blackberry can do it, and it makes me so jealous.

    Read the article

  • Creating a view linking three different node types with two node references

    - by mikesir87
    I have the following content types: Camp - the top level type Registration Information - contains node reference to Camp called Camp Medical Release Form - contains node reference to registration information called Camper I would like to create a View that takes the nid for the Camp, and pulls out all the fields for the Registration Info and Medical Release Form. I'm having trouble figuring out how to set up the various arguments/relationships. I haven't done something that's referenced more than two types. I know it would be smart/best to just combine the Registration Info and Medical Release Form, since it's a 1:1 mapping, but we can't. So... any help would be appreciated!

    Read the article

  • Why is Windows Update trying to install an update I don't need?

    - by Oliver Salzburg
    I have a Windows 7 system that currently has a single update pending: Windows Internet Explorer 9 for Windows 7 for x64-based Systems If I try to install the update, Windows Update will: Create a restore point Fail with the error: Code 9C48 Windows Update encountered an error. The event log for the event reads: Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Internet Explorer 9 for Windows 7 for x64-based Systems. If you search the web for that error, there are many other people with the exact same issue. Sadly, I am unable to apply the proposed solutions to my case, because I just installed this system. There is nothing on it, except Windows 7. I installed the system and ran through the updates. I also did the exact same process with this machine several times over the past few days due to a long-term test we just started. I didn't have any problems with any Windows Update on the previous installation runs and I know I didn't do anything different this time because I followed the installation procedures instructions which are to be used during the test. How did this happen and how do I solve it? Further Investigation So, as I always like to do, I ran the update again while running Process Monitor and dug up further details. WindowsUpdate.log First of all, there is a Windows Update log file located at C:\Windows\WindowsUpdate.log which I didn't know about. But I fail to see any significant entry in it, maybe you're more lucky: 2012-04-10 22:46:58:017 956 728 AU AU received approval from Ux for 1 updates 2012-04-10 22:46:58:017 956 728 AU AU setting pending client directive to 'Progress Ux' 2012-04-10 22:46:58:095 956 728 AU BeginInteractiveInstall invoked for Download 2012-04-10 22:46:58:095 956 728 AU Auto-approving update for download, updateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0 2012-04-10 22:46:58:095 956 728 AU Auto-approved 1 update(s) for download (for Ux) 2012-04-10 22:46:58:110 956 728 AU UpdateDownloadProperties: 0 download(s) are still in progress. 2012-04-10 22:46:58:110 956 728 AU ############# 2012-04-10 22:46:58:110 956 728 AU ## START ## AU: Download updates 2012-04-10 22:46:58:110 956 728 AU ######### 2012-04-10 22:46:58:110 956 728 AU # Approved updates = 1 2012-04-10 22:46:58:110 956 728 AU AU initiated download, updateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100, callId = {35DF928B-B428-4BAC-8C63-55295967EFBB} 2012-04-10 22:46:58:110 956 728 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:46:58:110 956 728 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:110 956 728 AU Currently showing Progress UX client - so not launching any other client 2012-04-10 22:46:58:110 956 bb8 DnldMgr ************* 2012-04-10 22:46:58:110 956 bb8 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp] 2012-04-10 22:46:58:110 956 bb8 DnldMgr ********* 2012-04-10 22:46:58:110 956 bb8 DnldMgr * Call ID = {35DF928B-B428-4BAC-8C63-55295967EFBB} 2012-04-10 22:46:58:110 956 bb8 DnldMgr * Priority = 3, Interactive = 1, Owner is system = 0, Explicit proxy = 0, Proxy session id = 1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77} 2012-04-10 22:46:58:110 956 bb8 DnldMgr * Updates to download = 1 2012-04-10 22:46:58:110 956 bb8 Agent * Title = Windows Internet Explorer 9 for Windows 7 for x64-based Systems 2012-04-10 22:46:58:110 956 bb8 Agent * UpdateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100 2012-04-10 22:46:58:110 956 bb8 Agent * Bundles 1 updates: 2012-04-10 22:46:58:110 956 bb8 Agent * {6D9A90B7-FAF9-4A47-9EFE-A506264873B3}.100 2012-04-10 22:46:58:110 956 bb8 DnldMgr *********** DnldMgr: New download job [UpdateId = {6D9A90B7-FAF9-4A47-9EFE-A506264873B3}.100] *********** 2012-04-10 22:46:58:110 956 728 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:110 956 728 AU # Pending download calls = 1 2012-04-10 22:46:58:110 956 728 AU ## RESUMED ## AU: Download update [UpdateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}, succeeded] 2012-04-10 22:46:58:313 956 bb8 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp] 2012-04-10 22:46:58:313 956 bb8 Agent ************* 2012-04-10 22:46:58:313 956 718 AU ######### 2012-04-10 22:46:58:313 956 718 AU ## END ## AU: Download updates 2012-04-10 22:46:58:313 956 718 AU ############# 2012-04-10 22:46:58:313 956 718 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:46:58:313 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:313 956 718 AU Currently showing Progress UX client - so not launching any other client 2012-04-10 22:46:58:313 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:313 956 aac AU Getting featured update notifications. fIncludeDismissed = true 2012-04-10 22:46:58:313 956 aac AU No featured updates available. 2012-04-10 22:47:00:107 956 aac AU BeginInteractiveInstall invoked for Install 2012-04-10 22:47:00:107 956 aac AU Auto-approving update for install, updateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0 2012-04-10 22:47:00:107 956 aac AU Auto-approved 1 update(s) for install (for Ux), installType=1 2012-04-10 22:47:00:107 956 aac AU ############# 2012-04-10 22:47:00:107 956 aac AU ## START ## AU: Install updates 2012-04-10 22:47:00:107 956 aac AU ######### 2012-04-10 22:47:00:107 956 aac AU # Initiating manual install 2012-04-10 22:47:00:107 956 aac AU # Approved updates = 1 2012-04-10 22:47:00:107 956 aac AU ## RESUMED ## AU: Installing update [UpdateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}] 2012-04-10 22:47:13:773 2232 9fc Handler : WARNING: Exit code = 0x8024200B 2012-04-10 22:47:13:773 956 718 AU # WARNING: Install failed, error = 0x80070643 / 0x00009C48 2012-04-10 22:47:13:773 2232 9fc Handler ::::::::: 2012-04-10 22:47:13:773 2232 9fc Handler :: END :: Handler: Command Line Install 2012-04-10 22:47:13:773 2232 9fc Handler ::::::::::::: 2012-04-10 22:47:13:851 956 a7c Agent ********* 2012-04-10 22:47:13:851 956 a7c Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates] 2012-04-10 22:47:13:851 956 718 AU Install call completed. 2012-04-10 22:47:13:851 956 a7c Agent ************* 2012-04-10 22:47:13:851 956 718 AU # WARNING: Install call completed, reboot required = No, error = 0x00000000 2012-04-10 22:47:13:851 956 718 AU ######### 2012-04-10 22:47:13:851 956 718 AU ## END ## AU: Installing updates [CallId = {FCFF2A5C-25AB-4FB9-AB2B-35C65CCA6A9F}] 2012-04-10 22:47:13:851 956 718 AU ############# 2012-04-10 22:47:13:851 956 718 AU Install complete for all calls, reboot NOT needed 2012-04-10 22:47:13:851 956 718 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:47:13:851 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:13:851 956 498 AU Getting featured update notifications. fIncludeDismissed = true 2012-04-10 22:47:13:851 956 498 AU No featured updates available. 2012-04-10 22:47:14:366 956 168 AU No featured updates notifications to show 2012-04-10 22:47:14:366 956 168 AU UpdateDownloadProperties: 0 download(s) are still in progress. 2012-04-10 22:47:14:366 956 168 AU Triggering Offline detection (non-interactive) 2012-04-10 22:47:14:366 956 168 AU AU setting pending client directive to 'Install Complete Ux' 2012-04-10 22:47:14:366 956 168 AU Changing existing AU client directive from 'Progress Ux' to 'Install Complete Ux', session id = 0x1 2012-04-10 22:47:14:366 956 168 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:14:366 956 b78 AU ############# 2012-04-10 22:47:14:366 956 b78 AU ## START ## AU: Search for updates 2012-04-10 22:47:14:366 956 b78 AU ######### 2012-04-10 22:47:14:366 956 b78 AU ## RESUMED ## AU: Search for updates [CallId = {0198DD3A-D7B0-48F5-A77D-795F8A1BDCE8}] 2012-04-10 22:47:16:097 956 718 AU # 1 updates detected 2012-04-10 22:47:16:097 956 718 AU ######### 2012-04-10 22:47:16:097 956 718 AU ## END ## AU: Search for updates [CallId = {0198DD3A-D7B0-48F5-A77D-795F8A1BDCE8}] 2012-04-10 22:47:16:097 956 718 AU ############# 2012-04-10 22:47:16:097 956 718 AU No featured updates notifications to show 2012-04-10 22:47:16:097 956 718 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:47:16:097 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:16:097 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:16:113 956 55c AU Getting featured update notifications. fIncludeDismissed = true 2012-04-10 22:47:16:113 956 55c AU No featured updates available. 2012-04-10 22:47:18:780 956 bb8 Report REPORT EVENT: {27479C66-E930-4F9C-AFF2-27EDD76DED8F} 2012-04-10 22:47:13:773+0200 1 182 101 {B33ACEC1-3265-4D01-9C37-AC0892E95ED9} 100 80070643 AutomaticUpdates Failure Content Install Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Internet Explorer 9 for Windows 7 for x64-based Systems. 2012-04-10 22:47:18:780 956 bb8 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8 2012-04-10 22:47:18:780 956 bb8 Report WER Report sent: 7.5.7601.17514 0x80070643 B33ACEC1-3265-4D01-9C37-AC0892E95ED9 Install 101 Unmanaged 2012-04-10 22:47:18:780 956 bb8 Report CWERReporter finishing event handling. (00000000) WU-IE9-Windows7-x64.exe The actual update that is executed is downloaded and stored at the following location: C:\Windows\SoftwareDistribution\Download\Install\WU-IE9-Windows7-x64.exe Executing that file manually, results in the following error message: IE9_main.log The IE9 installer/updater also creates an own log file located at C:\Windows\IE9_main.log For the update session in question, the installer logged: 00:00.000: ==================================================================== 00:00.016: Started: 2012/04/10 (Y/M/D) 23:10:53.897 (local) 00:00.032: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds) 00:00.063: Command line: "C:\Windows\SoftwareDistribution\Download\Install\WU-IE9-Windows7-x64.exe" 00:00.078: INFO: Setup installer for Internet Explorer: 9.0.8112.16421 00:00.094: INFO: Previous version of Internet Explorer: 9.0.8112.16443 00:00.110: INFO: Checking if iexplore.exe's current version is between 9.0.6001.0... 00:00.125: INFO: ...and 9.1.0.0... 00:00.141: INFO: Maximum version on which to run IEAK branding is: 9.1.0.0... 00:00.156: ERROR: A newer version of Internet Explorer is already installed on the system. 00:00.188: ERROR: Internet Explorer version check failed. 01:03.789: INFO: Setup exit code: 0x00009C48 (40008) - A more recent version of Internet Explorer is installed. 01:03.820: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll 01:03.852: INFO: SQM Upload returned 403 01:03.867: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE978E.tmp 01:03.883: INFO: Unable to remove directory C:\Windows\TEMP\IE978E.tmp, marking for deletion on reboot. 01:03.898: INFO: Released Internet Explorer Installer Mutex Which pretty much confirms what the error message says when executing the update manually; it's simply already installed or even obsolete because a newer version is installed. So, why does it try to keep installing the update? Possible solutions? Uninstalling Windows Internet Explorer 9 and manually installing the cached C:\Windows\SoftwareDistribution\Download\Install\WU-IE9-Windows7-x64.exe will result in the same error after applying all pending updates. Applying the FixIt for the issue You receive “0x80070643” or “0x643” error codes when you try to install .NET Framework updates through Windows Update or Microsoft Updates will not resolve the issue. Applying the suggested solution for the issue Error message when you try to install updates by using the Windows Update or Microsoft Update Web site: "0x80070003" will not resolve the issue. Running the FixIt Automatically diagnose and fix common problems with Windows Update does report having resolved issues with Windows Update, but didn't resolve the issue. Running the FixIt for the issue How to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update does not resolve the issue. Neither with normal nor with aggressive settings.

    Read the article

  • Caching all files in varnish

    - by csgwro
    I want my varnish servers to cache all files. At backend there is lighttpd hosting only static files, and there is an md5 in the url in case of file change, ex. /gfx/Bird.b6e0bc2d6cbb7dfe1a52bc45dd2b05c4.swf). However my hit ratio is very poorly (about 0.18) My config: sub vcl_recv { set req.backend=default; ### passing health to backend if (req.url ~ "^/health.html$") { return (pass); } remove req.http.If-None-Match; remove req.http.cookie; remove req.http.authenticate; if (req.request == "GET") { return (lookup); } } sub vcl_fetch { ### do not cache wrong codes if (beresp.status == 404 || beresp.status >= 500) { set beresp.ttl = 0s; } remove beresp.http.Etag; remove beresp.http.Last-Modified; } sub vcl_deliver { set resp.http.expires = "Thu, 31 Dec 2037 23:55:55 GMT"; } I have made an performance tuning: DAEMON_OPTS="${DAEMON_OPTS} -p thread_pool_min=200 -p thread_pool_max=4000 -p thread_pool_add_delay=2 -p session_linger=100" The main url which is missed is... /health.html. Is that forward to backend correctly configured? Disabling health checking hit ratio increases to 0.45. Now mostly "/crossdomain.xml" is missed (from many domains, as it is wildcard). How can I avoid that? Should I carry on other headers like User-Agent or Accept-Encoding? I thing that default hashing mechanism is using url + host/IP. Compression is used at the backend. What else can improve performance?

    Read the article

  • HIMSS 2011 and New Press Release

    - by chris.kawalek(at)oracle.com
    We're here at HIMSS 2011 in booth 1651. If you're at the show, tomorrow (Wednesday) is the final day for the exhibits, so come over and see all of the Oracle demos displayed on Sun Ray Clients. It's extremely cool! Also, we did a press release here at the show about caregiver mobility with Wolf Medical Software. Have a read here. Wolf Medical Software did a press release themselves, too. You can read their press release here.

    Read the article

  • Healthcare Mobile Database Synchronization Demonstration

    - by Jim Connors
    Like many of you, I learn best by getting my hands dirty.  When confronted with the task of understanding a new set of products and technologies and figuring out how they might apply to a vertical industry like healthcare, I set out to create a demonstration.  The video that follows aims to show how the Oracle embedded software portfolio can be applied to a healthcare application.  The demonstration utilizes among others, Java SE Embedded, Berkeley DB, Apache Tomcat, Oracle 11gR2 and Oracle Database Mobile Server. Eric Jensen gives a great critique and description of the demo here.  To sum it up, we aim to show how live medical data can be collected on a medical device, stored in a local database, synchronized to a master database and furthermore propagated to a mobile phone (Android) application.  Come take a look!

    Read the article

  • Which programming language could I use for Natural Language Processing to extract clinical words?

    - by MACEE
    I am going to do entity extraction (like Named Entity Recognition) from clinical free text (unstructured raw text such as discharge summaries) and these entities could be any medical problem, medical tests or treatments. I am going to use one of i2b2 datasets (https://www.i2b2.org/) if case you are familiar with that. I am new to the NLP(Natural Language Processing) field and I need a programming language to support NLP tasks and also easily connect to the available libraries of machine learning algorithms like CRF. I don't know much java and I heard about Python, Perl and Scala but I am not sure which one would be the best option for this task?

    Read the article

  • HP proliant dl360 g5 fails to reboot

    - by user1039384
    Some history of this also available here. As of my latest update on the forum linked above, now cold reboot as well as hard reset and following boot for my proliant dl360 g5 works as expected and successfully boot the system. However, soft-reboot results in internal health indicator turning RED on the front and long beeps every around 6seconds until I either cold reboot or press and hold the power button. A summary of system state when this happens: Internal Health led indicator: RED External Health led indicator: Green No led next to any component is red or amber No POST message neither on the video output nor on IML logs (verified both at the time issue occures and after cold reboot that boots the system successfully). Any thoughts please share. I hope we can knock this issue down together with your help!

    Read the article

  • How does Outlook handle old recurring reminders?

    - by Zian Choy
    Context: Windows 7 Ultimate 32-bit edition Microsoft Office 2007 Outlook Steps to Reproduce: Make an event that recurs once a week. Wait a week. See that it pops up OK. Wait a month. Notice that it doesn't say that it is a month overdue. Expected Result: The usual note that the reminder is [x] weeks overdue. Actual Result: Something like "6 days overdue". Possible Excaberating Issue: I have many overdue reminders. For the ones that aren't time critical (and all other things being equal), I work by category and age. For example, I do health-related reminders when I'm doing health stuff; if I have 2 health-related reminders, I do the older one first. Big Question: How is Outlook supposed to handle this sort of overdue recurring reminder? Is there any way to get Outlook to act the way I expect it to?

    Read the article

  • How to manage a multiplayer asynchronous environment in a game

    - by Phil
    I'm working on a game where players can setup villages, which can contain defending units. Any of these units (each on their own tiles) can be set to "campaign" which means they are no longer defending but can now be used to attack other villages. And each unit on a tile can have up to a 100 health. So far so good. Oh and it's all asynchronous so even though the server will be aware that your village is being attacked, you won't be until the attack is over. The issue I'm struggling with, is the following situation. Let's say a unit on a tile is being attacked by a player from another village. The other player see's your village and is attacking your units. You don't know this is happening though, so you set your unit to campaign and off you go to attack another village, with the unit which itself is actually being attacked by this other player. The other player stops attacking your village and leaves your unit with say a health of 1, which is then saved to the server. You however have this same unit are attacking another village with it, but now you discover that even though it started off with a 100 health, now mysteriously it only has 1... Solutions? Ideas? Edit The simplest solutions are often the best. I referred to Clash of clans below, well after a bit more digging it seems that in CoC you can only attack players that are offline! ha, that almost solves the problem. I say almost because there's still the situation where a players village could be in the process of being attacked when they come back online, still need to address that. Edit 2 A solution to the "What happens when a player is attacking your village and you come online" issue, could be the attacking player just get's kicked out of the village at that point and just get's whatever they had won up to that point, it's a bit of a fudge but it might work.

    Read the article

  • Calculating the "power" of a player in a "Defend Your Castle" type game

    - by Jesse Emond
    I'm a making a "Defend Your Castle" type game, where each player has a castle and must send units to destroy the opponent's castle. It looks like this (and yeah, this is the actual game, not a quick paint drawing..): Now, I'm trying to implement the AI of the opponent, and I'd like to create 4 different AI levels: Easy, Normal, Hard and Hardcore. I've never made any "serious" AI before and I'd like to create a quite complete one this time. My idea is to calculate a player's "power" score, based on the current health of its castle and the individual "power" score of its units. Then, the AI would just try to keep a score close to the player's one(Easy would stay below it, Normal would stay near it and Hard would try to get above it). But I just don't know how to calculate a player's power score. There are just too many variables to take into account and I don't know how to properly use them to create one significant number(the power level). Could anyone help me out on this one? Here are the variables that should influence a player's power score: Current castle health, the unit's total health, damage, speed and attack range. Also, the player can have increased Income(the money bag), damage(the + Damage) and speed(the + speed)... How could I include them in the score? I'm really stuck here... Or is there an other way that I could implement AI for this type of game? Thanks for your precious time.

    Read the article

  • Ubuntu 11.10 power management does not recognize removal of power supply!

    - by sema
    I have a Lenovo Ideapad Z370 with Ubuntu 11.10 and the battery status indicator shows wrong information. Problem: The indicator always shows that the power supply is connected, even if it's not connected. The battery charges and discharges normally. However, the status information is wrong. When charging, the "time to charge" decreases, and when discharging the "time to charge" increases. If the power supply is connected the power statistics show: "Supply Yes" "Online Yes" If it is not connected it shows: "Supply Yes" "Online No" My trials: I tried reinstalling the indicator applet, but that doesn't help. Searching for solutions or similar problems didn't point out any help. Background: The problem occured after I switched the battery mode in Windows. (I use a dual boot system.) Lenovo drivers allow a "battery runtime mode" for maximum runtime and a "battery health mode" for maximum battery lifetime. I initially used the runtime mode, tried the health mode for some time, but switched back to the runtime mode. The problem occured after switching to health mode. Does anyone have an idea what is wrong? The problem is relevant for me as I get no information when battery status low and the computer runs out of energy without shutdown or hibernation. This is really a problem for me!

    Read the article

  • ORAchk version 2.2.5 is now available for download

    - by Gerry Haskins
    Those awfully nice ORAchk folks have asked me to let you know about their latest release... ORAchk version 2.2.5 is now available for download, new features in 2.2.5: Running checks for multiple databases in parallel Ability to schedule multiple automated runs via ORAchk daemon New "scratch area" for ORAchk temporary files moved from /tmp to a configurable $HOME directory location System health score calculation now ignores skipped checks Checks the health of pluggable databases using OS authentication New report section to report top 10 time consuming checks to be used for optimizing runtime in the future More readable report output for clusterwide checks Includes over 50 new Health Checks for the Oracle Stack Provides a single dashboard to view collections across your entire enterprise using the Collection Manager, now pre-bundled Expands coverage of pre and post upgrade checks to include standalone databases, with new profile options to run only these checks Expands to additional product areas in E-Business Suite of Workflow & Oracle Purchasing and in Enterprise Manager Cloud Control ORAchk has replaced the popular RACcheck tool, extending the coverage based on prioritization of top issues reported by users, to proactively scan for known problems within the area of: Oracle Database Standalone Database Grid Infrastructure & RAC Maximum Availability Architecture (MAA) Validation Upgrade Readiness Validation Golden Gate Enterprise Manager Cloud Control Repository E-Business Suite Oracle Payables (R12 only) Oracle Workflow Oracle Purchasing (R12 only) Oracle Sun Systems Oracle Solaris ORAchk features: Proactively scans for the most impactful problems across the various layers of your stack Streamlines how to investigate and analyze which known issues present a risk to you Executes lightweight checks in your environment, providing immediate results with no configuration data sent to Oracle Local reporting capability showing specific problems and their resolutions Ability to configure email notifications when problems are detected Provides a single dashboard to view collections across your entire enterprise using the Collection Manager ORAchk will expand in the future with high impact checks in existing and additional product areas. If you have particular checks or product areas you would like to see covered, please post suggestions in the ORAchk subspace in My Oracle Support Community. For more details about ORAchk see Document 1268927.2

    Read the article

  • Handling game logic events by behavior components

    - by chehob
    My question continues on topic discussed here I have tried implementing attribute/behavior design and here is a quick example demonstrating the issue. class HealthAttribute : public ActorAttribute { public: HealthAttribute( float val ) : mValue( val ) { } float Get( void ) const { return mValue; } void Set( float val ) { mValue = val; } private: float mValue; }; class HealthBehavior : public ActorBehavior { public: HealthBehavior( shared_ptr< HealthAttribute > health ) : pHealth( health ) { // Set OnDamage() to listen for game logic event "DamageEvent" } void OnDamage( IEventDataPtr pEventData ) { // Check DamageEvent target entity // ( compare my entity ID with event's target entity ID ) // If not my entity, do nothing // Else, modify health attribute with received DamageEvent data } protected: shared_ptr< HealthAttribute > pHealth; }; My question - is it possible to get rid of this annoying check for game logic events? In the current implementation when some entity must receive damage, game logic just fires off event that contains damage value and the entity id which should receive that damage. And all HealthBehaviors are subscribed to the DamageEvent type, which leads to any entity possesing HealthBehavior call OnDamage() even if he is not the addressee.

    Read the article

  • Recent improvements in Console Performance

    - by loren.konkus
    Recently, the WebLogic Server development and support organizations have worked with a number of customers to quantify and improve the performance of the Administration Console in large, distributed configurations where there is significant latency in the communications between the administration server and managed servers. These improvements fall into two categories: Constraining the amount of time that the Console stalls waiting for communication Reducing and streamlining the amount of data required for an update A few releases ago, we added support for a configurable domain-wide mbean "Invocation Timeout" value on the Console's configuration: general, advanced section for a domain. The default value for this setting is 0, which means wait indefinitely and was chosen for compatibility with the behavior of previous releases. This configuration setting applies to all mbean communications between the admin server and managed servers, and is the first line of defense against being blocked by a stalled or completely overloaded managed server. Each site should choose an appropriate timeout value for their environment and network latency. In the next release of WebLogic Server, we've added an additional console preference, "Management Operation Timeout", to the Console's shared preference page. This setting further constrains how long certain console pages will wait for slowly responding servers before returning partial results. While not all Console pages support this yet, key pages such as the Servers Configuration and Control table pages and the Deployments Control pages have been updated to support this. For example, if a user requests a Servers Table page and a Management Operation Timeout occurs, the table is displayed with both local configuration and remote runtime information from the responding managed servers and only local configuration information for servers that did not yet respond. This means that a troublesome managed server does not impede your ability to manage your domain using the Console. To support these changes, these Console pages have been re-written to use the Work Management feature of WebLogic Server to interact with each server or deployment concurrently, which further improves the responsiveness of these pages. The basic algorithm for these pages is: For each configuration mbean (ie, Servers) populate rows with configuration attributes from the fast, local mbean server Find a WorkManager For each server, Create a Work instance to obtain runtime mbean attributes for the server Schedule Work instance in the WorkManager Call WorkManager.waitForAll to wait WorkItems to finish, constrained by Management Operation Timeout For each WorkItem, if the runtime information obtained was not complete, add a message indicating which server has incomplete data Display collected data in table In addition to these changes to constrain how long the console waits for communication, a number of other changes have been made to reduce the amount and scope of managed server interactions for key pages. For example, in previous releases the Deployments Control table looked at the status of a deployment on every managed server, even those servers that the deployment was not currently targeted on. (This was done to handle an edge case where a deployment's target configuration was changed while it remained running on previously targeted servers.) We decided supporting that edge case did not warrant the performance impact for all, and instead only look at the status of a deployment on the servers it is targeted to. Comprehensive status continues to be available if a user clicks on the 'status' field for a deployment. Finally, changes have been made to the System Status portlet to reduce its impact on Console page display times. Obtaining health information for this display requires several mbean interactions with managed servers. In previous releases, this mbean interaction occurred with every display, and any delay or impediment in these interactions was reflected in the display time for every page. To reduce this impact, we've made several changes in this portlet: Using Work Management to obtain health concurrently Applying the operation timeout configuration to constrain how long we will wait Caching health information to reduce the cost during rapid navigation from page to page and only obtaining new health information if the previous information is over 30 seconds old. Eliminating heath collection if this portlet is minimized. Together, these Console changes have resulted in significant performance improvements for the customers with large configurations and high latency that we have worked with during their development, and some lesser performance improvements for those with small configurations and very fast networks. These changes will be included in the 11g Rel 1 patch set 2 (10.3.3.0) release of WebLogic Server.

    Read the article

  • Data Security Through Structure, Procedures, Policies, and Governance

    Security Structure and Procedures One of the easiest ways to implement security is through the use of structure, in particular the structure in which data is stored. The preferred method for this through the use of User Roles, these Roles allow for specific access to be granted based on what role a user plays in relation to the data that they are manipulating. Typical data access actions are defined by the CRUD Principle. CRUD Principle: Create New Data Read Existing Data Update Existing Data Delete Existing Data Based on the actions assigned to a role assigned, User can manipulate data as they need to preform daily business operations.  An example of this can be seen in a hospital where doctors have been assigned Create, Read, Update, and Delete access to their patient’s prescriptions so that a doctor can prescribe and adjust any existing prescriptions as necessary. However, a nurse will only have Read access on the patient’s prescriptions so that they will know what medicines to give to the patients. If you notice, they do not have access to prescribe new prescriptions, update or delete existing prescriptions because only the patient’s doctor has access to preform those actions. With User Roles comes responsibility, companies need to constantly monitor data access to ensure that the proper roles have the most appropriate access levels to ensure users are not exposed to inappropriate data.  In addition this also protects rouge employees from gaining access to critical business information that could be destroyed, altered or stolen. It is important that all data access is monitored because of this threat. Security Governance Current Data Governance laws regarding security Health Insurance Portability and Accountability Act (HIPAA) Sarbanes-Oxley Act Database Breach Notification Act The US Department of Health and Human Services defines HIIPAA as a Privacy Rule. This legislation protects the privacy of individually identifiable health information. Currently, HIPAA   sets the national standards for securing electronically protected health records. Additionally, its confidentiality provisions protect identifiable information being used to analyze patient safety events and improve patient safety. In 2002 after the wake of the Enron and World Com Financial scandals Senator Paul Sarbanes and Representative Michael Oxley lead the creation of the Sarbanes-Oxley Act. This act administered by the Securities and Exchange Commission (SEC) dramatically altered corporate financial practices and data governance. In addition, it also set specific deadlines for compliance. The Sarbanes-Oxley is not a set of standard business rules and does not specify how a company should retain its records; In fact, this act outlines which pieces of data are to be stored as well as the storage duration. The Database Breach Notification Act requires companies, in the event of a data breach containing personally identifiable information, to notify all California residents whose information was stored on the compromised system at the time of the event, according to Gregory Manter. He further explains that this act is only California legislation. However, it does affect “any person or business that conducts business in California, and that owns or licenses computerized data that includes personal information,” regardless of where the compromised data is located.  This will force any business that maintains at least limited interactions with California residents will find themselves subject to the Act’s provisions. Security Policies All companies must work in accordance with the appropriate city, county, state, and federal laws. One way to ensure that a company is legally compliant is to enforce security policies that adhere to the appropriate legislation in their area or areas that they service. These types of polices need to be mandated by a company’s Security Officer. For smaller companies, these policies need to come from executives, Directors, and Owners.

    Read the article

  • Good DBAs Do Baselines

    - by Louis Davidson
    One morning, you wake up and feel funny. You can’t quite put your finger on it, but something isn’t quite right. What now? Unless you happen to be a hypochondriac, you likely drag yourself out of bed, get on with the day and gather more “evidence”. You check your symptoms over the next few days; do you feel the same, better, worse? If better, then great, it was some temporal issue, perhaps caused by an allergic reaction to some suspiciously spicy chicken. If the same or worse then you go to the doctor for some health advice, but armed with some data to share, and having ruled out certain possible causes that are fixed with a bit of rest and perhaps an antacid. Whether you realize it or not, in comparing how you feel one day to the next, you have taken baseline measurements. In much the same way, a DBA uses baselines to gauge the gauge health of their database servers. Of course, while SQL Server is very willing to share data regarding its health and activities, it has almost no idea of the difference between good and bad. Over time, experienced DBAs develop “mental” baselines with which they can gauge the health of their servers almost as easily as their own body. They accumulate knowledge of the daily, natural state of each part of their database system, and so know instinctively when one of their databases “feels funny”. Equally, they know when an “issue” is just a passing tremor. They see their SQL Server with all of its four CPU cores running close 100% and don’t panic anymore. Why? It’s 5PM and every day the same thing occurs when the end-of-day reports, which are very CPU intensive, are running. Equally, they know when they need to respond in earnest when it is the first time they have heard about an issue, even if it has been happening every day. Nevertheless, no DBA can retain mental baselines for every characteristic of their systems, so we need to collect physical baselines too. In my experience, surprisingly few DBAs do this very well. Part of the problem is that SQL Server provides a lot of instrumentation. If you look, you will find an almost overwhelming amount of data regarding user activity on your SQL Server instances, and use and abuse of the available CPU, I/O and memory. It seems like a huge task even to work out which data you need to collect, let alone start collecting it on a regular basis, managing its storage over time, and performing detailed comparative analysis. However, without baselines, though, it is very difficult to pinpoint what ails a server, just by looking at a single snapshot of the data, or to spot retrospectively what caused the problem by examining aggregated data for the server, collected over many months. It isn’t as hard as you think to get started. You’ve probably already established some troubleshooting queries of the type SELECT Value FROM SomeSystemTableOrView. Capturing a set of baseline values for such a query can be as easy as changing it as follows: INSERT into BaseLine.SomeSystemTable (value, captureTime) SELECT Value, SYSDATETIME() FROM SomeSystemTableOrView; Of course, there are monitoring tools that will collect and manage this baseline data for you, automatically, and allow you to perform comparison of metrics over different periods. However, to get yourself started and to prove to yourself (or perhaps the person who writes the checks for tools) the value of baselines, stick something similar to the above query into an agent job, running every hour or so, and you are on your way with no excuses! Then, the next time you investigate a slow server, and see x open transactions, y users logged in, and z rows added per hour in the Orders table, compare to your baselines and see immediately what, if anything, has changed!

    Read the article

  • How to search and locate (annotate) in MKMapView?

    - by chaitanya
    Hi, In my application I have to search five nearest locations of "medical services" using the user current location and annotate those locations on my MKMapView. Can any one tell me how to search with a particular keyword (eg. medical services, garages) by using user current locations and annotate onto the map and when the user taps on the annotations it should show the complete address of the locations which is annotated. Can anyone help me in this?

    Read the article

  • Search and annotate in MKMapView?

    - by chaitanya
    Hi, In my application I have to search five nearest locations of "medical services" using the user current location and annotate those locations on my MKMapView. Can any one tell me how to search with a particular keyword (eg. medical services, garages) by using user current locations and annotate onto the map and when the user taps on the annotations it should show the complete address of the locations which is annotated. Can anyone help me in this?

    Read the article

  • C++ Header file questions

    - by Karl
    So I'm trying to learn C++ and I've gotten as far as using header files. They really make no sense to me. I've tried many combinations of this but nothing so far has worked: Main.cpp: #include "test.h" int main() { testClass Player1; return 0; } test.h: #ifndef TEST_H_INCLUDED #define TEST_H_INCLUDED class testClass { private: int health; public: testClass(); ~testClass(); int getHealth(); void setHealth(int inH); }; #endif // TEST_H_INCLUDED test.cpp: #include "test.h" testClass::testClass() { health = 100; } testClass::~testClass() {} int testClass::getHealth() { return(health); } void testClass::setHealth(int inH) { health = inH; } What I'm trying to do is pretty simple, but the way the header files work just makes no sense to me at all. Code blocks returns the following on build: obj\Debug\main.o(.text+0x131)||In function main':| *voip*\test\main.cpp |6|undefined reference totestClass::testClass()'| obj\Debug\main.o(.text+0x13c):voip\test\main.cpp|7|undefined reference to `testClass::~testClass()'| ||=== Build finished: 2 errors, 0 warnings ===| I'd appreciate any help. Or if you have a decent tutorial for it, that would be fine too (most of the tutorials I've googled haven't helped)

    Read the article

  • AutoMapper is not working for a Container class

    - by rboarman
    Hello, I have an AutoMapper issue that has been driving me crazy for way too long now. A similar question was also posted on the AutoMapper user site but has not gotten much love. The summary is that I have a container class that holds a Dictionary of components. The components are a derived object of a common base class. I also have a parallel structure that I am using as DTO objects to which I want to map. The error that gets generated seems to say that the mapper cannot map between two of the classes that I have included in the CreateMap calls. I think the error has to do with the fact that I have a Dictionary of objects that are not part of the container‘s hierarchy. I apologize in advance for the length of the code below. My simple test cases work. Needless to say, it’s only the more complex case that is failing. Here are the classes: #region Dto objects public class ComponentContainerDTO { public Dictionary<string, ComponentDTO> Components { get; set; } public ComponentContainerDTO() { this.Components = new Dictionary<string, ComponentDTO>(); } } public class EntityDTO : ComponentContainerDTO { public int Id { get; set; } } public class ComponentDTO { public EntityDTO Owner { get; set; } public int Id { get; set; } public string Name { get; set; } public string ComponentType { get; set; } } public class HealthDTO : ComponentDTO { public decimal CurrentHealth { get; set; } } public class PhysicalLocationDTO : ComponentDTO { public Point2D Location { get; set; } } #endregion #region Domain objects public class ComponentContainer { public Dictionary<string, Component> Components { get; set; } public ComponentContainer() { this.Components = new Dictionary<string, Component>(); } } public class Entity : ComponentContainer { public int Id { get; set; } } public class Component { public Entity Owner { get; set; } public int Id { get; set; } public string Name { get; set; } public string ComponentType { get; set; } } public class Health : Component { public decimal CurrentHealth { get; set; } } public struct Point2D { public decimal X; public decimal Y; public Point2D(decimal x, decimal y) { X = x; Y = y; } } public class PhysicalLocation : Component { public Point2D Location { get; set; } } #endregion The code: var entity = new Entity() { Id = 1 }; var healthComponent = new Health() { CurrentHealth = 100, Owner = entity, Name = "Health", Id = 2 }; entity.Components.Add("1", healthComponent); var locationComponent = new PhysicalLocation() { Location = new Point2D() { X = 1, Y = 2 }, Owner = entity, Name = "PhysicalLocation", Id = 3 }; entity.Components.Add("2", locationComponent); Mapper.CreateMap<ComponentContainer, ComponentContainerDTO>() .Include<Entity, EntityDTO>(); Mapper.CreateMap<Entity, EntityDTO>(); Mapper.CreateMap<Component, ComponentDTO>() .Include<Health, HealthDTO>() .Include<PhysicalLocation, PhysicalLocationDTO>(); Mapper.CreateMap<Component, ComponentDTO>(); Mapper.CreateMap<Health, HealthDTO>(); Mapper.CreateMap<PhysicalLocation, PhysicalLocationDTO>(); Mapper.AssertConfigurationIsValid(); var targetEntity = Mapper.Map<Entity, EntityDTO>(entity); The error when I call Map() (abbreviated stack crawls): AutoMapper.AutoMapperMappingException was unhandled Message=Trying to map MapperTest1.Entity to MapperTest1.EntityDTO. Using mapping configuration for MapperTest1.Entity to MapperTest1.EntityDTO Exception of type 'AutoMapper.AutoMapperMappingException' was thrown. Source=AutoMapper StackTrace: at AutoMapper.MappingEngine.AutoMapper.IMappingEngineRunner.Map(ResolutionContext context) . . . InnerException: AutoMapper.AutoMapperMappingException Message=Trying to map System.Collections.Generic.Dictionary`2[[System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[MapperTest1.Component, ElasticTest1, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null]] to System.Collections.Generic.Dictionary`2[[System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[MapperTest1.ComponentDTO, ElasticTest1, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null]]. Using mapping configuration for MapperTest1.Entity to MapperTest1.EntityDTO Destination property: Components Exception of type 'AutoMapper.AutoMapperMappingException' was thrown. Source=AutoMapper StackTrace: at AutoMapper.Mappers.TypeMapObjectMapperRegistry.PropertyMapMappingStrategy.MapPropertyValue(ResolutionContext context, IMappingEngineRunner mapper, Object mappedObject, PropertyMap propertyMap) . . InnerException: AutoMapper.AutoMapperMappingException Message=Trying to map System.Collections.Generic.Dictionary`2[[System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[MapperTest1.Component, ElasticTest1, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null]] to System.Collections.Generic.Dictionary`2[[System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[MapperTest1.ComponentDTO, ElasticTest1, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null]]. Using mapping configuration for MapperTest1.Entity to MapperTest1.EntityDTO Destination property: Components Exception of type 'AutoMapper.AutoMapperMappingException' was thrown. Source=AutoMapper StackTrace: at AutoMapper.MappingEngine.AutoMapper.IMappingEngineRunner.Map(ResolutionContext context) . InnerException: AutoMapper.AutoMapperMappingException Message=Trying to map MapperTest1.Component to MapperTest1.ComponentDTO. Using mapping configuration for MapperTest1.Health to MapperTest1.HealthDTO Destination property: Components Exception of type 'AutoMapper.AutoMapperMappingException' was thrown. Source=AutoMapper StackTrace: at AutoMapper.MappingEngine.AutoMapper.IMappingEngineRunner.Map(ResolutionContext context) . . InnerException: AutoMapper.AutoMapperMappingException Message=Trying to map System.Decimal to System.Decimal. Using mapping configuration for MapperTest1.Health to MapperTest1.HealthDTO Destination property: CurrentHealth Exception of type 'AutoMapper.AutoMapperMappingException' was thrown. Source=AutoMapper StackTrace: at AutoMapper.Mappers.TypeMapObjectMapperRegistry.PropertyMapMappingStrategy.MapPropertyValue(ResolutionContext context, IMappingEngineRunner mapper, Object mappedObject, PropertyMap propertyMap) . . InnerException: System.InvalidCastException Message=Unable to cast object of type 'MapperTest1.ComponentDTO' to type 'MapperTest1.HealthDTO'. Source=Anonymously Hosted DynamicMethods Assembly StackTrace: at SetCurrentHealth(Object , Object ) . . Thank you in advance. Rick

    Read the article

  • Set The Progress Bar Over 100% C#

    - by PhaDaPhunk
    its my first time using a ProgressBar in c#. The idea is to use the ProgressBar as an health bar in a simple game. The thing is I think the bar's maximum value is 100% but i would like to give it a higher value like let's say 1000% or, not sure if it's possible, give the bar an integer value instead of a percentage. progressBar1.Increment(100); This is where I initialize the health to 100points. Even if I use this syntax: progressBar1.Increment(1000); And I subtract : progressBar1.Increment(-25); The player is loosing 1/4 of is life as if he only had 100 Health Points. Any idea how I could change the maximum Bar value? Thanks in advance.

    Read the article

  • First Day of Data Integration Track at Oracle OpenWorld 2012

    - by Irem Radzik
    OpenWorld started full speed for us today with a great set of sessions in the Data Integration track. After the exciting keynote session on Oracle Database 12c in the morning; Brad Adelberg, VP of Development for Data Integration products, presented Oracle’s data integration product strategy. His session highlighted the new requirements for data integration to achieve pervasive and continuous access to trusted data. The new requirements and product focus areas presented in this session are: Provide access to any data at any source On premise or on cloud Enable zero downtime operations and maximum performance Leverage real-time data for accurate business insights And ensure high quality data is used across the enterprise During the session Brad walked over how Oracle’s data integration products, Oracle Data Integrator, Oracle GoldenGate, Oracle Enterprise Data Quality, and Oracle Data Service Integrator, deliver on these requirements and how recent product releases build on this strategy. Soon after Brad’s session we heard from a panel of Oracle GoldenGate customers, St. Jude Medical, Equifax, and Bank of America, how they achieved zero downtime operations using Oracle GoldenGate. The panel presented different use cases of GoldenGate, from Active-Active replication to offloading reporting. Especially St. Jude Medical’s implementation, which involves the alert management system for patients that use their pacemakers, reminded me in some cases downtime of mission-critical systems can be a matter of life or death. It is very comforting to hear that GoldenGate delivers highly-reliable continuous availability for life-saving medical systems. In the afternoon, Nick Wagner from the Product Management team and I followed the customer panel with the review of Oracle GoldenGate 11gR2’s New Features.  Many questions we received from audience were about GoldenGate’s new Integrated Capture for Oracle Database and the enhanced Conflict Management features, as well as how GoldenGate compares to Oracle Streams. In addition to giving details on GoldenGate’s unique capability to capture changed data with a direct integration to the Oracle DBMS engine, we reminded the audience that enhancements to Oracle GoldenGate will continue, while Streams will be primarily maintained. Last but not least, Tim Garrod and Ryan Fonnett from Raymond James presented a unified real-time data integration solution using Oracle Data Integrator and GoldenGate for their operational data store (ODS). The ODS supports application services across the enterprise and providing timely data is a critical requirement. In this solution, Oracle GoldenGate does the log-based change data capture for Oracle Data Integrator’s near real-time data integration between heterogeneous systems. As Raymond James’ ODS supports mission-critical services for their advisors, the project team had to set up this integration environment to be highly available. During the session, Ryan and Tim explained how they use ODI to enable automated process execution and “always-on” integration processes. Their presentation included 2 demonstrations that focused on CDC patterns deployed with ODI and the automated multi-instance execution and monitoring. We are very grateful to Tim and Ryan for their very-well prepared presentation at OpenWorld this year. Day 2 (Tuesday) will be also a busy day in our track. In addition to the Fusion Middleware Innovation Awards ceremony at 11:45am at Moscone West 3001, we have the following DI sessions Real-World Operational Reporting Customer Panel 11:45am Moscone West- 3005 Oracle Data Integrator Product Update and Future Strategy 1:15pm Moscone West- 3005 High-volume OLTP with Oracle GoldenGate: Best Practices from Comcast 1:15pm Moscone West- 3005 Everything You need to Know about Monitoring Oracle GoldenGate 5pm Moscone West-3005 If you are at OpenWorld please join us in these sessions. For a full review of data integration track at OpenWorld please see our Focus-On document.

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >