Search Results

Search found 6115 results on 245 pages for 'michael 19'.

Page 8/245 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • DHCP reply packets do not make it into KVM instance in OpenStack

    - by Lorin Hochstein
    I'm running a KVM instance inside of OpenStack, and it isn't getting an IP address from the DHCP server. Using tcpdump, I can see the request and reply packets on vnet0 of the compute host: # tcpdump -i vnet0 -n port 67 or port 68 tcpdump: WARNING: vnet0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on vnet0, link-type EN10MB (Ethernet), capture size 65535 bytes 19:44:56.176727 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:46:f6:11, length 300 19:44:56.176785 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:46:f6:11, length 300 19:44:56.177315 IP 10.40.0.1.67 > 10.40.0.3.68: BOOTP/DHCP, Reply, length 319 19:45:02.179834 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:46:f6:11, length 300 19:45:02.179904 IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from fa:16:3e:46:f6:11, length 300 19:45:02.180375 IP 10.40.0.1.67 > 10.40.0.3.68: BOOTP/DHCP, Reply, length 319 However, if I do the same thing on eth0 inside the KVM instance, I only see the request packets, not the reply packets. What would prevent the packets from making it from vnet0 of the host to eth0 of the guest? My host is running Ubuntu 12.04 and my guest is running CentOS 6.3. Note that I have added this rule in my iptables, but it doesn't resolve the issue: -A POSTROUTING -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill The instance corresponds to vnet0 and is connected via br100: # brctl show bridge name bridge id STP enabled interfaces br100 8000.54781a8605f2 no eth1 vnet0 vnet1 virbr0 8000.000000000000 yes Here's the full iptables-save: # Generated by iptables-save v1.4.12 on Tue Apr 2 19:47:27 2013 *nat :PREROUTING ACCEPT [8323:2553683] :INPUT ACCEPT [7993:2494942] :OUTPUT ACCEPT [6158:461050] :POSTROUTING ACCEPT [6455:511595] :nova-compute-OUTPUT - [0:0] :nova-compute-POSTROUTING - [0:0] :nova-compute-PREROUTING - [0:0] :nova-compute-float-snat - [0:0] :nova-compute-snat - [0:0] :nova-postrouting-bottom - [0:0] -A PREROUTING -j nova-compute-PREROUTING -A OUTPUT -j nova-compute-OUTPUT -A POSTROUTING -j nova-compute-POSTROUTING -A POSTROUTING -j nova-postrouting-bottom -A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535 -A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -p udp -j MASQUERADE --to-ports 1024-65535 -A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -j MASQUERADE -A nova-compute-snat -j nova-compute-float-snat -A nova-postrouting-bottom -j nova-compute-snat COMMIT # Completed on Tue Apr 2 19:47:27 2013 # Generated by iptables-save v1.4.12 on Tue Apr 2 19:47:27 2013 *mangle :PREROUTING ACCEPT [7969:5385812] :INPUT ACCEPT [7905:5363718] :FORWARD ACCEPT [158:48190] :OUTPUT ACCEPT [6877:8647975] :POSTROUTING ACCEPT [7035:8696165] -A POSTROUTING -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill -A POSTROUTING -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill COMMIT # Completed on Tue Apr 2 19:47:27 2013 # Generated by iptables-save v1.4.12 on Tue Apr 2 19:47:27 2013 *filter :INPUT ACCEPT [2196774:15856921923] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [2447201:1170227646] :nova-compute-FORWARD - [0:0] :nova-compute-INPUT - [0:0] :nova-compute-OUTPUT - [0:0] :nova-compute-inst-19 - [0:0] :nova-compute-inst-20 - [0:0] :nova-compute-local - [0:0] :nova-compute-provider - [0:0] :nova-compute-sg-fallback - [0:0] :nova-filter-top - [0:0] -A INPUT -j nova-compute-INPUT -A INPUT -i virbr0 -p udp -m udp --dport 53 -j ACCEPT -A INPUT -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT -A INPUT -i virbr0 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT -A FORWARD -j nova-filter-top -A FORWARD -j nova-compute-FORWARD -A FORWARD -d 192.168.122.0/24 -o virbr0 -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 192.168.122.0/24 -i virbr0 -j ACCEPT -A FORWARD -i virbr0 -o virbr0 -j ACCEPT -A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -j nova-filter-top -A OUTPUT -j nova-compute-OUTPUT -A nova-compute-FORWARD -i br100 -j ACCEPT -A nova-compute-FORWARD -o br100 -j ACCEPT -A nova-compute-inst-19 -m state --state INVALID -j DROP -A nova-compute-inst-19 -m state --state RELATED,ESTABLISHED -j ACCEPT -A nova-compute-inst-19 -j nova-compute-provider -A nova-compute-inst-19 -s 10.40.0.1/32 -p udp -m udp --sport 67 --dport 68 -j ACCEPT -A nova-compute-inst-19 -s 10.40.0.0/16 -j ACCEPT -A nova-compute-inst-19 -p tcp -m tcp --dport 22 -j ACCEPT -A nova-compute-inst-19 -p icmp -j ACCEPT -A nova-compute-inst-19 -j nova-compute-sg-fallback -A nova-compute-inst-20 -m state --state INVALID -j DROP -A nova-compute-inst-20 -m state --state RELATED,ESTABLISHED -j ACCEPT -A nova-compute-inst-20 -j nova-compute-provider -A nova-compute-inst-20 -s 10.40.0.1/32 -p udp -m udp --sport 67 --dport 68 -j ACCEPT -A nova-compute-inst-20 -s 10.40.0.0/16 -j ACCEPT -A nova-compute-inst-20 -p tcp -m tcp --dport 22 -j ACCEPT -A nova-compute-inst-20 -p icmp -j ACCEPT -A nova-compute-inst-20 -j nova-compute-sg-fallback -A nova-compute-local -d 10.40.0.3/32 -j nova-compute-inst-19 -A nova-compute-local -d 10.40.0.4/32 -j nova-compute-inst-20 -A nova-compute-sg-fallback -j DROP -A nova-filter-top -j nova-compute-local COMMIT # Completed on Tue Apr 2 19:47:27 2013

    Read the article

  • Ping flood attack every 5 seconds

    - by Mario
    My router's log, which is a D-Link DIR-600, shows 40 pages (and updating) of entries like: Nov 19 11:17:08 PING-FLOODING flooding attack from WAN (ip:85.250.85.11) detected. Nov 19 11:17:02 PING-FLOODING flooding attack from WAN (ip:85.131.129.176) detected. Nov 19 11:16:57 PING-FLOODING flooding attack from WAN (ip:122.107.244.152) detected. Nov 19 11:16:50 PING-FLOODING flooding attack from WAN (ip:88.103.8.96) detected. Nov 19 11:16:46 PING-FLOODING flooding attack from WAN (ip:212.142.91.106) detected. Nov 19 11:16:38 PING-FLOODING flooding attack from WAN (ip:184.170.6.63) detected. Nov 19 11:16:34 PING-FLOODING flooding attack from WAN (ip:1.239.96.192) detected. Nov 19 11:16:26 PING-FLOODING flooding attack from WAN (ip:120.29.76.184) detected. Nov 19 11:16:20 PING-FLOODING flooding attack from WAN (ip:110.77.137.228) detected. Nov 19 11:16:15 PING-FLOODING flooding attack from WAN (ip:201.141.51.210) detected. What should I do? ICMP is disabled (router does not respond to WAN pings).

    Read the article

  • SAS Expanders vs Direct Attached (SAS)?

    - by jemmille
    I have a storage unit with 2 backplanes. One backplane holds 24 disks, one backplane holds 12 disks. Each backplane is independently connected to a SFF-8087 port (4 channel/12Gbit) to the raid card. Here is where my question really comes in. Can or how easily can a backplane be overloaded? All the disks in the machine are WD RE4 WD1003FBYX (black) drives that have average writes at 115MB/sec and average read of 125 MB/sec I know things would vary based on the raid or filesystem we put on top of that but it seems to be that a 24 disk backplane with only one SFF-8087 connector should be able to overload the bus to a point that might actually slow it down? Based on my math, if I had a RAID0 across all 24 disks and asked for a large file, I should, in theory should get 24*115 MB/sec wich translates to 22.08 GBit/sec of total throughput. Either I'm confused or this backplane is horribly designed, at least in a perfomance environment. I'm looking at switching to a model where each drive has it's own channel from the backplane (and new HBA's or raid card). EDIT: more details We have used both pure linux (centos), open solaris, software raid, hardware raid, EXT3/4, ZFS. Here are some examples using bonnie++ 4 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 194MB/s 19% 92MB/s 11% 200MB/s 8% 310/sec 194MB/s 19% 93MB/s 11% 201MB/s 8% 312/sec --------- ---- --------- ---- --------- ---- --------- 389MB/s 19% 186MB/s 11% 402MB/s 8% 311/sec 8 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 324MB/s 32% 164MB/s 19% 346MB/s 13% 466/sec 324MB/s 32% 164MB/s 19% 348MB/s 14% 465/sec --------- ---- --------- ---- --------- ---- --------- 648MB/s 32% 328MB/s 19% 694MB/s 13% 465/sec 12 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 377MB/s 38% 191MB/s 22% 429MB/s 17% 537/sec 376MB/s 38% 191MB/s 22% 427MB/s 17% 546/sec --------- ---- --------- ---- --------- ---- --------- 753MB/s 38% 382MB/s 22% 857MB/s 17% 541/sec Now 16 Disk RAID-0, it's gets interesting WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 359MB/s 34% 186MB/s 22% 407MB/s 18% 1397/sec 358MB/s 33% 186MB/s 22% 407MB/s 18% 1340/sec --------- ---- --------- ---- --------- ---- --------- 717MB/s 33% 373MB/s 22% 814MB/s 18% 1368/sec 20 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 371MB/s 37% 188MB/s 22% 450MB/s 19% 775/sec 370MB/s 37% 188MB/s 22% 447MB/s 19% 797/sec --------- ---- --------- ---- --------- ---- --------- 741MB/s 37% 376MB/s 22% 898MB/s 19% 786/sec 24 Disk RAID-1, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 347MB/s 34% 193MB/s 22% 447MB/s 19% 907/sec 347MB/s 34% 192MB/s 23% 446MB/s 19% 933/sec --------- ---- --------- ---- --------- ---- --------- 694MB/s 34% 386MB/s 22% 894MB/s 19% 920/sec 28 Disk RAID-0, ZFS 32 Disk RAID-0, ZFS 36 Disk RAID-0, ZFS More details: Here is the exact unit: http://www.supermicro.com/products/chassis/4U/847/SC847E1-R1400U.cfm

    Read the article

  • Apache (XAMPP 1.8.0) access.log/Intrusion Detection Concern

    - by Andy Holaday
    [I originally posted on SO but it earned me a Tumbleweed badge. This looks like a better venue for the question.] I have Apache (XAMPP 1.8.0) running on Vista Pro x64. A couple times now I have seen a pattern like the example below in access.log. Concerning is the "attack" seems to somehow shift from a public IP to a valid private IP on my network (happens to be the WAN address of one of my routers). Two questions: How is this possible, and what happens if the "attacker" stumbles on a valid request? I've googled this to no avail. 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.5.4/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.5.5-rc1/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.2.6/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.5.5-rc2/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:19:56 -0400] "GET /phpMyAdmin-2.5.6-rc2/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:56 -0400] "GET /phpMyAdmin-2.5.6-rc1/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:56 -0400] "GET /phpMyAdmin-2.5.5-pl1/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:19:59 -0400] "GET /phpMyAdmin-2.5.7/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:20:01 -0400] "GET /phpMyAdmin-2.5.7-pl1/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:20:02 -0400] "GET HTTP/1.1" 400 1060 "-" "-"

    Read the article

  • Why does Google mark one e-mail as spam while does not the other?

    - by nKn
    I've a Postfix installation which works fine, I don't get any trouble with mails sent through a mail client (in my case, Thunderbird or RoundCube) when the To: address is a GMail account. However, I recently needed to use the PHPMailer tool to send some e-mails to some GMail accounts, so I configured an account to be used via SASL authentication + TLS. I don't mean mass mailing, just 2-3 mails. If I send the e-mail from the Thunderbird or RoundCube clients, the mail is not marked as spam. However, if I use PHPMailer, it always gets catalogued as spam. So I compared both headers and I just can't find the reason why the second is marked as spam while the first one is just ok. The first header sent from a mail client which is not marked as spam: Delivered-To: [email protected] Received: by 10.76.153.102 with SMTP id vf6csp230573oab; Tue, 19 Aug 2014 11:08:19 -0700 (PDT) X-Received: by 10.60.23.39 with SMTP id j7mr45544050oef.20.1408471699715; Tue, 19 Aug 2014 11:08:19 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.mydomain.com (X.ip-92-222-X.eu. [92.222.X.X]) by mx.google.com with ESMTPS id t5si27115082oej.10.2014.08.19.11.08.18 for <[email protected]> (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 19 Aug 2014 11:08:19 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) client-ip=92.222.X.X; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) [email protected]; dkim=pass (test mode) [email protected] Received: by mail.mydomain.com (Postfix, from userid 111) id D8F69120293D; Tue, 19 Aug 2014 19:08:17 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471697; bh=wKMX9gkQ7tCLv8ezrG5t4bICm/SSLQsNfTdZMToksWw=; h=Date:From:To:Subject:From; b=qRNcYVdmk+n3D1uuv0FInTx7/LzH2ojck9DgCmabFPvfke233lkojUOjezCUGx7iV DL8EayZ28mzzzHpB7ETeMzop/5OS3BmvFtGKVD9gzc78cDIFXTDoRFAnkRWDR2IOxI SOn5tiyODTFpkbDgJOndzQ6qL5K0S9ASNGCZrNL4= X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on vpsX.ovh.net X-Spam-Level: X-Spam-Status: No, score=-1.0 required=3.0 tests=ALL_TRUSTED,T_DKIM_INVALID autolearn=ham autolearn_force=no version=3.4.0 Received: from [192.168.1.111] (unknown [77.231.X.X]) (using TLSv1 with cipher ECDHE-RSA-AES128-SHA (128/128 bits)) (No client certificate requested) (Authenticated sender: [email protected]) by mail.mydomain.com (Postfix) with ESMTPSA id 910341202624 for <[email protected]>; Tue, 19 Aug 2014 19:08:17 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471697; bh=wKMX9gkQ7tCLv8ezrG5t4bICm/SSLQsNfTdZMToksWw=; h=Date:From:To:Subject:From; b=qRNcYVdmk+n3D1uuv0FInTx7/LzH2ojck9DgCmabFPvfke233lkojUOjezCUGx7iV DL8EayZ28mzzzHpB7ETeMzop/5OS3BmvFtGKVD9gzc78cDIFXTDoRFAnkRWDR2IOxI SOn5tiyODTFpkbDgJOndzQ6qL5K0S9ASNGCZrNL4= Message-ID: <[email protected]> Date: Tue, 19 Aug 2014 19:08:24 +0100 From: My Name <[email protected]> User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0 MIME-Version: 1.0 To: My other account <[email protected]> Subject: . Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit . The second header sent from PHPMailer which is always marked as spam: Delivered-To: [email protected] Received: by 10.76.153.102 with SMTP id vf6csp230832oab; Tue, 19 Aug 2014 11:12:10 -0700 (PDT) X-Received: by 10.60.121.67 with SMTP id li3mr44086252oeb.17.1408471930520; Tue, 19 Aug 2014 11:12:10 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.mydomain.com (X.ip-92-222-X.eu. [92.222.X.X]) by mx.google.com with ESMTPS id w8si27103806obn.30.2014.08.19.11.12.10 for <[email protected]> (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 19 Aug 2014 11:12:10 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) client-ip=92.222.X.X; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) [email protected]; dkim=pass (test mode) [email protected] Received: by mail.mydomain.com (Postfix, from userid 111) id 1999D120293D; Tue, 19 Aug 2014 19:12:09 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471929; bh=N1JuHq1S+8GrjHcEK3xn8P1JS+ygEBv5LKe0BiXuVJo=; h=Date:To:From:Reply-to:Subject:From; b=K7tcPyArzSTY91VEw6mAAFtDurSGwgTLGkfUZdC5mqsg0g/1LzmZkgwdjj4NdJa6M E2kDz3dwYN8FcZmbampJYFXxj4NQVtSnzjiWV40rpfOFqD2rXDGNIyB2QOjBZZ4WK3 7s4lyoJ/BrdQH4en8ctLVsDHed/KpHD4iGFEl67E= X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on vpsX.ovh.net X-Spam-Level: X-Spam-Status: No, score=-1.0 required=3.0 tests=ALL_TRUSTED,T_DKIM_INVALID autolearn=ham autolearn_force=no version=3.4.0 Received: from rpi.mydomain.com (unknown [77.231.X.X]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: [email protected]) by mail.mydomain.com (Postfix) with ESMTPSA id B42AF1202624 for <[email protected]>; Tue, 19 Aug 2014 19:12:08 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471928; bh=N1JuHq1S+8GrjHcEK3xn8P1JS+ygEBv5LKe0BiXuVJo=; h=Date:To:From:Reply-to:Subject:From; b=iXPM0tS36swudPTT4FOHHtPi5Ll6LbR60kNqCinZ8utcWoFE31SFTpoMEq5aCM5ux wQMdFiN8c6vkjRGabmvqFTTIbwJsrToHo/4+Lt5HEBoQQE2Y3T+xGmnmGAHCS6stKB yb7SVmtrIAsVtSMKA8VYIbmu2oYqV3afYt7g0OMQ= Date: Tue, 19 Aug 2014 20:12:07 +0200 To: [email protected] From: Trying another account <[email protected]> Reply-to: Trying another account <[email protected]> Subject: . Message-ID: <[email protected]> X-Priority: 3 X-Mailer: PHPMailer 5.1 (phpmailer.sourceforge.net) MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="UTF-8" . I also tried: Adding a User-Agent header to match the first one. Removing the X-Mailer header. No one of them made a difference. Is there some significant difference which is making the second e-mail to be marked as spam by Google?

    Read the article

  • Search Engine Marketing Ardan Michael Blum, Would You Like to Learn SEO Like a Pro?

    Learning Search Engine Optimization techniques (SEO) along with keyword research is key to marketing yourself, your business, your website or your blog on the internet. Ardan Michael Blum is a Yahoo SEO expert out of Switzerland. He has over 9 years experience as a SEO expert and guarantees his clients first page rankings in the search engines. For a business, first page rankings can mean success! But, outsourcing to someone like Ardan Michael Blum is going to be costly.

    Read the article

  • DateFormat conversion problem in java?

    - by androidbase Praveen
    my input String is : 2010-03-24T17:28:50.000Z output pattern is like: DateFormat formatter1 = new SimpleDateFormat("EEE. MMM. d. yyyy"); i convert this like this: formatter1.format(new Date("2010-03-24T17:28:50.000Z"));//illegalArgumentException here the string "2010-03-24T17:28:50.000Z" ouput should be like this: Thu. Mar. 24. 2010 idea but i get a illegalArgumentException. Dont know why? any idea?? stacktrace message is: 04-08 19:50:28.326: WARN/System.err(306): java.lang.IllegalArgumentException 04-08 19:50:28.345: WARN/System.err(306): at java.util.Date.parse(Date.java:447) 04-08 19:50:28.355: WARN/System.err(306): at java.util.Date.<init>(Date.java:157) 04-08 19:50:28.366: WARN/System.err(306): at com.example.brown.Bru_Tube$SelectDataTask.doInBackground(Bru_Tube.java:222) 04-08 19:50:28.366: WARN/System.err(306): at com.example.brown.Bru_Tube$SelectDataTask.doInBackground(Bru_Tube.java:1) 04-08 19:50:28.405: WARN/System.err(306): at android.os.AsyncTask$2.call(AsyncTask.java:185) 04-08 19:50:28.415: WARN/System.err(306): at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:305) 04-08 19:50:28.415: WARN/System.err(306): at java.util.concurrent.FutureTask.run(FutureTask.java:137) 04-08 19:50:28.446: WARN/System.err(306): at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1068) 04-08 19:50:28.456: WARN/System.err(306): at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:561) 04-08 19:50:28.466: WARN/System.err(306): at java.lang.Thread.run(Thread.java:1096)

    Read the article

  • How to merge duplicates in 2D python arrays

    - by Wei Lou
    Hi, I have a set of data similar to this: No Start Time End Time CallType Info 1 13:14:37.236 13:14:53.700 Ping1 RTT(Avr):160ms 2 13:14:58.955 13:15:29.984 Ping2 RTT(Avr):40ms 3 13:19:12.754 13:19:14.757 Ping3_1 RTT(Avr):620ms 3 13:19:12.754 Ping3_2 RTT(Avr):210ms 4 13:14:58.955 13:15:29.984 Ping4 RTT(Avr):360ms 5 13:19:12.754 13:19:14.757 Ping1 RTT(Avr):40ms 6 13:19:59.862 13:20:01.522 Ping2 RTT(Avr):163ms ... when i parse through it, i need merge the results of Ping3_1 and Ping3_2. Then take average of those two row export as one row. So the end of result would be like this: No Start Time End Time CallType Info 1 13:14:37.236 13:14:53.700 Ping1 RTT(Avr):160ms 2 13:14:58.955 13:15:29.984 Ping2 RTT(Avr):40ms 3 13:19:12.754 13:19:14.757 Ping3 RTT(Avr):415ms 4 13:14:58.955 13:15:29.984 Ping4 RTT(Avr):360ms 5 13:19:12.754 13:19:14.757 Ping1 RTT(Avr):40ms 6 13:19:59.862 13:20:01.522 Ping2 RTT(Avr):163ms currently i am concatenating column 0 and 1 to make a unique key, find duplication there then doing rest of special treatment for those parallel Pings. It is not elegant at all. Just wonder what is the better way to do it. Thanks!

    Read the article

  • how to rollback/undo yum update on fedora after messing the fedora versions

    - by misteryes
    I want to install texlive on my fedora 16 laptop with the following procedure: # yum remove tex-* texlive-* # cat > /etc/yum.repos.d/texlive.repo <<EOF [texlive] name=texlive baseurl=http://jnovy.fedorapeople.org/texlive/2012/packages.f17/ enabled=1 gpgcheck=0 EOF # yum update; # yum install texlive after yum update, I notice that my laptop is fedora 16, while I used 2012/packages.fc17/ so I modify /etc/yum.repos.d/texlive.repo to use 2011/packages.fc16 and do yum update again however, there are many errors [root@kitty esolve]# yum update Loaded plugins: auto-update-debuginfo, langpacks, presto, refresh-packagekit http://repos.fedorapeople.org/repos/leigh123linux/cinnamon/fedora-16/x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found : http://repos.fedorapeople.org/repos/leigh123linux/cinnamon/fedora-16/x86_64/repodata/repomd.xml Trying other mirror. Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package dvipng.x86_64 0:1.14-1.fc15 will be obsoleted ---> Package kpathsea.x86_64 0:2007-66.fc16 will be obsoleted --> Processing Dependency: libkpathsea.so.4()(64bit) for package: evince-dvi-3.2.1-2.fc16.x86_64 ---> Package mkvtoolnix.x86_64 0:5.8.0-1 will be updated ---> Package mkvtoolnix.x86_64 0:6.3.0-1 will be an update ---> Package nautilus-dropbox.x86_64 0:1.4.0-1.fc10 will be updated ---> Package nautilus-dropbox.x86_64 0:1.6.0-1.fc10 will be an update ---> Package texlive-dvipng-bin.x86_64 2:svn26509.0-19.20130317_r29408.fc17 will be obsoleting --> Processing Dependency: texlive-kpathsea-lib = 2:2012-19.20130317_r29408.fc17 for package: 2:texlive-dvipng-bin-svn26509.0-19.20130317_r29408.fc17.x86_64 --> Processing Dependency: texlive-base for package: 2:texlive-dvipng-bin-svn26509.0-19.20130317_r29408.fc17.x86_64 --> Processing Dependency: tex-dvipng for package: 2:texlive-dvipng-bin-svn26509.0-19.20130317_r29408.fc17.x86_64 --> Processing Dependency: libpng15.so.15()(64bit) for package: 2:texlive-dvipng-bin-svn26509.0-19.20130317_r29408.fc17.x86_64 --> Processing Dependency: libkpathsea.so.6()(64bit) for package: 2:texlive-dvipng-bin-svn26509.0-19.20130317_r29408.fc17.x86_64 ---> Package texlive-kpathsea.noarch 2:svn28792.0-19.fc17 will be obsoleting --> Processing Dependency: texlive-kpathsea-bin for package: 2:texlive-kpathsea-svn28792.0-19.fc17.noarch --> Running transaction check ---> Package kpathsea.x86_64 0:2007-66.fc16 will be obsoleted --> Processing Dependency: libkpathsea.so.4()(64bit) for package: evince-dvi-3.2.1-2.fc16.x86_64 ---> Package texlive-base.noarch 2:2012-19.20130317_r29408.fc17 will be installed ---> Package texlive-dvipng.noarch 2:svn26689.1.14-19.fc17 will be installed ---> Package texlive-dvipng-bin.x86_64 2:svn26509.0-19.20130317_r29408.fc17 will be obsoleting --> Processing Dependency: libpng15.so.15()(64bit) for package: 2:texlive-dvipng-bin-svn26509.0-19.20130317_r29408.fc17.x86_64 ---> Package texlive-kpathsea-bin.x86_64 2:svn27347.0-19.20130317_r29408.fc17 will be installed ---> Package texlive-kpathsea-lib.x86_64 2:2012-19.20130317_r29408.fc17 will be installed --> Finished Dependency Resolution Error: Package: evince-dvi-3.2.1-2.fc16.x86_64 (@fedora) Requires: libkpathsea.so.4()(64bit) Removing: kpathsea-2007-66.fc16.x86_64 (@so-updates) libkpathsea.so.4()(64bit) Obsoleted By: 2:texlive-kpathsea-svn28792.0-19.fc17.noarch (texlive) Not found Error: Package: 2:texlive-dvipng-bin-svn26509.0-19.20130317_r29408.fc17.x86_64 (texlive) Requires: libpng15.so.15()(64bit) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest and when I do yum install texlive, it simply tries to install the f17 version, which failed. what Can I do to install f16 version? how can I undo yum update with 2012/packages.f17/ I tried yum history, and for today's history, I only have Loaded plugins: auto-update-debuginfo, langpacks, presto, refresh-packagekit ID | Login user | Date and time | Action(s) | Altered ------------------------------------------------------------------------------- 124 | esolve ... <esolve> | 2013-09-12 18:35 | Erase | 24 123 | root <root> | 2013-08-23 11:08 | Update | 1 122 | root <root> | 2013-08-21 14:13 | Update | 1 < 121 | esolve ... <esolve> | 2013-05-31 15:36 | Install | 1 > 120 | root <root> | 2013-05-29 15:13 | Install | 1 < 119 | root <root> | 2013-04-18 13:13 | Update | 1 >< which seems not related to yum update the history results: 1003 yum update 1004 vim 1005 vim /etc/yum.repos.d/texlive.repo 1006 yum update 1007 yum install texlive 1008 vim /etc/yum.repos.d/texlive.repo 1009 clear 1010 yum history 1011 yum history list 1012 vim 1013 vim /etc/yum.repos.d/texlive.repo 1014 yum history list 1015 history also I tried yum history undo 124 but it failed! [root@kitty esolve]# yum history undo 124 Loaded plugins: auto-update-debuginfo, langpacks, presto, refresh-packagekit http://repos.fedorapeople.org/repos/leigh123linux/cinnamon/fedora-16/x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found : http://repos.fedorapeople.org/repos/leigh123linux/cinnamon/fedora-16/x86_64/repodata/repomd.xml Trying other mirror. Undoing transaction 124, from Thu Sep 12 18:35:31 2013 Erase R-2.14.1-1.fc16.x86_64 ? Erase R-core-2.14.1-1.fc16.x86_64 ? Erase R-devel-2.14.1-1.fc16.x86_64 ? Erase a2ps-4.14-12.fc15.x86_64 ? Erase docbook-utils-pdf-0.6.14-29.fc16.noarch ? Erase html2ps-1.0-0.7.b7.fc15.noarch ? Erase jadetex-3.13-10.fc15.noarch ? Erase kile-2.1.1-1.fc16.x86_64 ? Erase linuxdoc-tools-0.9.66-9.fc15.x86_64 ? Erase tetex-dvipost-1.1-12.fc15.x86_64 ? Erase tex-cm-lgc-0.5-18.fc15.noarch ? Erase tex-preview-11.86-6.fc16.noarch ? Erase texinfo-tex-4.13a-15.fc15.x86_64 ? Erase texlive-2007-66.fc16.x86_64 ? Erase texlive-dvips-2007-66.fc16.x86_64 ? Erase texlive-latex-2007-66.fc16.x86_64 ? Erase texlive-texmf-2007-40.fc16.noarch ? Erase texlive-texmf-dvips-2007-40.fc16.noarch ? Erase texlive-texmf-fonts-2007-40.fc16.noarch ? Erase texlive-texmf-latex-2007-40.fc16.noarch ? Erase texlive-utils-2007-66.fc16.x86_64 ? Erase texmaker-1:3.2.2-1.fc16.x86_64 ? Erase texmf-RR-Inria-4.11-inria.0.noarch ? Erase xdvik-22.84.14-9.fc15.x86_64 ? Error: No package(s) available to install

    Read the article

  • Michael Hartl's rails tutorial: reusing sessions resource for multiple User types

    - by ntaj
    I'm learning Ruby on Rails through Micheal Hartl's tutorial. In my web application, I require two types of Users, called publishers and subscribers. Currently I have a publishers resource and a subscribers resource. I'd like both of them to be able to use the sessions resource for signin/signout. I'm looking for some direction on how to implement this. Should my publisher and subscriber resource inherit from the User resource, so that, for example, the following code works through polymorphism? def create user = User.find_by_email(params[:session][:email]) if user && user.authenticate(params[:session][:password]) # Sign the user in and redirect to the user's show page. else # Create an error message and re-render the signin form. end end The publisher and subscriber do not have many common fields and different capabilities, so I think they should be modeled as two separate resources, but how to have them share the Sessions resource?

    Read the article

  • Internet doesn't work by default

    - by Adam Martinez
    After upgrading to Precise, I am required to run 'sudo dhclient eth0' in a terminal in order to get the internet to work. Everything worked perfectly fine on Oneiric, so It's really puzzling me. I'm thinking it could possibly be something with the kernel, but who knows. Output of dmesg: [ 0.247891] system 00:01: [io 0x0290-0x030f] has been reserved [ 0.247896] system 00:01: [io 0x0290-0x0297] has been reserved [ 0.247901] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.247908] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.247931] pnp 00:02: [dma 4] [ 0.247935] pnp 00:02: [io 0x0000-0x000f] [ 0.247939] pnp 00:02: [io 0x0080-0x0090] [ 0.247943] pnp 00:02: [io 0x0094-0x009f] [ 0.247947] pnp 00:02: [io 0x00c0-0x00df] [ 0.248033] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.248125] pnp 00:03: [io 0x0070-0x0073] [ 0.248187] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.248205] pnp 00:04: [io 0x0061] [ 0.248260] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.248277] pnp 00:05: [io 0x00f0-0x00ff] [ 0.248292] pnp 00:05: [irq 13] [ 0.248348] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.248583] pnp 00:06: [io 0x03f0-0x03f5] [ 0.248588] pnp 00:06: [io 0x03f7] [ 0.248597] pnp 00:06: [irq 6] [ 0.248601] pnp 00:06: [dma 2] [ 0.248690] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.248998] pnp 00:07: [io 0x03f8-0x03ff] [ 0.249008] pnp 00:07: [irq 4] [ 0.249122] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.249479] pnp 00:08: [io 0x0400-0x04bf] [ 0.249584] system 00:08: [io 0x0400-0x04bf] has been reserved [ 0.249591] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.249628] pnp 00:09: [mem 0xffb80000-0xffbfffff] [ 0.249690] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active) [ 0.250049] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.250167] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.250173] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.250302] pnp 00:0b: [mem 0x000f0000-0x000fffff] [ 0.250307] pnp 00:0b: [mem 0x7ff00000-0x7fffffff] [ 0.250311] pnp 00:0b: [mem 0xfed00000-0xfed000ff] [ 0.250316] pnp 00:0b: [mem 0x0000046e-0x0000056d] [ 0.250320] pnp 00:0b: [mem 0x7fee0000-0x7fefffff] [ 0.250324] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.250328] pnp 00:0b: [mem 0x00100000-0x7fedffff] [ 0.250332] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.250336] pnp 00:0b: [mem 0xfed14000-0xfed1dfff] [ 0.250341] pnp 00:0b: [mem 0xfed20000-0xfed9ffff] [ 0.250345] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.250349] pnp 00:0b: [mem 0xffb00000-0xffb7ffff] [ 0.250353] pnp 00:0b: [mem 0xfff00000-0xffffffff] [ 0.250357] pnp 00:0b: [mem 0x000e0000-0x000effff] [ 0.250409] pnp 00:0b: disabling [mem 0x0000046e-0x0000056d] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.250419] pnp 00:0b: disabling [mem 0x0000046e-0x0000056d disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.250430] pnp 00:0b: disabling [mem 0x0000046e-0x0000056d disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.250524] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.250530] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved [ 0.250536] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.250541] system 00:0b: [mem 0x7fee0000-0x7fefffff] could not be reserved [ 0.250547] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.250552] system 00:0b: [mem 0x00100000-0x7fedffff] could not be reserved [ 0.250558] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.250563] system 00:0b: [mem 0xfed14000-0xfed1dfff] has been reserved [ 0.250568] system 00:0b: [mem 0xfed20000-0xfed9ffff] has been reserved [ 0.250574] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.250579] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.250585] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 0.250590] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved [ 0.250596] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.250614] pnp: PnP ACPI: found 12 devices [ 0.250617] ACPI: ACPI bus type pnp unregistered [ 0.250624] PnPBIOS: Disabled by ACPI PNP [ 0.288725] PCI: max bus depth: 1 pci_try_num: 2 [ 0.288786] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref] [ 0.288792] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.288797] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.288804] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.288811] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.288820] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.288825] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.288833] pci 0000:00:1c.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.288840] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.288851] pci 0000:03:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref] [ 0.288856] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.288861] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.288869] pci 0000:00:1c.4: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.288876] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.288887] pci 0000:04:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] [ 0.288891] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 0.288897] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff] [ 0.288904] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.288911] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.288920] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.288926] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.288933] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.288940] pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.288971] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.288979] pci 0000:00:01.0: setting latency timer to 64 [ 0.288991] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.288998] pci 0000:00:1c.0: setting latency timer to 64 [ 0.289008] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.289014] pci 0000:00:1c.4: setting latency timer to 64 [ 0.289030] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.289037] pci 0000:00:1c.5: setting latency timer to 64 [ 0.289047] pci 0000:00:1e.0: setting latency timer to 64 [ 0.289054] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.289058] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.289063] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.289067] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.289072] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff] [ 0.289077] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.289081] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.289086] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.289092] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.289096] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.289101] pci_bus 0000:02: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.289106] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.289110] pci_bus 0000:03: resource 1 [mem 0xfd700000-0xfd7fffff] [ 0.289115] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.289120] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.289124] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.289129] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.289134] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.289138] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.289143] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.289148] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.289152] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.289157] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.289161] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.289166] pci_bus 0000:05: resource 8 [mem 0x7ff00000-0xfebfffff] [ 0.289233] NET: Registered protocol family 2 [ 0.289360] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.289754] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.290351] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.290670] TCP: Hash tables configured (established 131072 bind 65536) [ 0.290674] TCP reno registered [ 0.290680] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.290703] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.290868] NET: Registered protocol family 1 [ 0.290911] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.290932] pci 0000:00:1a.0: PCI INT A disabled [ 0.290956] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.290975] pci 0000:00:1a.1: PCI INT B disabled [ 0.290992] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.291012] pci 0000:00:1a.2: PCI INT D disabled [ 0.291031] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.291068] pci 0000:00:1a.7: PCI INT C disabled [ 0.291104] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.291123] pci 0000:00:1d.0: PCI INT A disabled [ 0.291135] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.291155] pci 0000:00:1d.1: PCI INT B disabled [ 0.291166] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.291185] pci 0000:00:1d.2: PCI INT C disabled [ 0.291198] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.291219] pci 0000:00:1d.7: PCI INT A disabled [ 0.291258] pci 0000:01:00.0: Boot video device [ 0.291273] PCI: CLS 4 bytes, default 64 [ 0.291857] audit: initializing netlink socket (disabled) [ 0.291876] type=2000 audit(1336753420.284:1): initialized [ 0.337724] highmem bounce pool size: 64 pages [ 0.337734] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.349241] VFS: Disk quotas dquot_6.5.2 [ 0.349365] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.350418] fuse init (API version 7.17) [ 0.350611] msgmni has been set to 1685 [ 0.351179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.351229] io scheduler noop registered [ 0.351233] io scheduler deadline registered [ 0.351247] io scheduler cfq registered (default) [ 0.351450] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.351502] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.351585] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.351639] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.351728] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.351779] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.351875] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.351927] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.352094] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.352143] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.352311] intel_idle: MWAIT substates: 0x22220 [ 0.352315] intel_idle: does not run on family 6 model 23 [ 0.352446] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.352455] ACPI: Power Button [PWRB] [ 0.352556] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.352562] ACPI: Power Button [PWRF] [ 0.352650] ACPI: Fan [FAN] (on) [ 0.355667] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.355673] ACPI: Thermal Zone [THRM] (26 C) [ 0.355750] ERST: Table is not found! [ 0.355753] GHES: HEST is not enabled! [ 0.355898] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.376332] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.376582] isapnp: Scanning for PnP cards... [ 0.709133] Freeing initrd memory: 13792k freed [ 0.729743] isapnp: No Plug & Play device found [ 0.816786] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.832385] Linux agpgart interface v0.103 [ 0.835605] brd: module loaded [ 0.837138] loop: module loaded [ 0.837452] ata_piix 0000:00:1f.2: version 2.13 [ 0.837473] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.837480] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.837546] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.838099] scsi0 : ata_piix [ 0.838253] scsi1 : ata_piix [ 0.839183] ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19 [ 0.839192] ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19 [ 0.839239] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.839246] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.839300] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.839708] scsi2 : ata_piix [ 0.839841] scsi3 : ata_piix [ 0.840301] ata3: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19 [ 0.840308] ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19 [ 0.840429] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.840467] pata_acpi 0000:03:00.0: setting latency timer to 64 [ 0.840488] pata_acpi 0000:03:00.0: PCI INT A disabled [ 0.841159] Fixed MDIO Bus: probed [ 0.841205] tun: Universal TUN/TAP device driver, 1.6 [ 0.841210] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.841322] PPP generic driver version 2.4.2 [ 0.841515] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.841542] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.841567] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.841573] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.841658] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.845582] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported [ 0.845610] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000 [ 0.860022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.860264] hub 1-0:1.0: USB hub found [ 0.860272] hub 1-0:1.0: 6 ports detected [ 0.860404] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.860424] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.860430] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.860512] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.864413] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported [ 0.864438] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000 [ 0.880021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.880227] hub 2-0:1.0: USB hub found [ 0.880234] hub 2-0:1.0: 6 ports detected [ 0.880369] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.880396] uhci_hcd: USB Universal Host Controller Interface driver [ 0.880431] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.880443] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.880449] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.880529] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.880574] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 0.880803] hub 3-0:1.0: USB hub found [ 0.880811] hub 3-0:1.0: 2 ports detected [ 0.880929] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.880940] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.880946] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.881039] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.881081] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 0.881302] hub 4-0:1.0: USB hub found [ 0.881310] hub 4-0:1.0: 2 ports detected [ 0.881427] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.881438] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.881443] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.881523] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.881551] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00 [ 0.881774] hub 5-0:1.0: USB hub found [ 0.881781] hub 5-0:1.0: 2 ports detected [ 0.881899] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.881910] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.881915] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.881993] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.882021] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 0.882244] hub 6-0:1.0: USB hub found [ 0.882252] hub 6-0:1.0: 2 ports detected [ 0.882370] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.882381] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.882386] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.882467] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.882495] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 0.882735] hub 7-0:1.0: USB hub found [ 0.882742] hub 7-0:1.0: 2 ports detected [ 0.882858] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.882869] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.882875] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.882954] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.882982] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 0.883205] hub 8-0:1.0: USB hub found [ 0.883213] hub 8-0:1.0: 2 ports detected [ 0.883435] usbcore: registered new interface driver libusual [ 0.883535] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.883926] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.883936] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.884187] mousedev: PS/2 mouse device common for all mice [ 0.884433] rtc_cmos 00:03: RTC can wake from S4 [ 0.884582] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.884612] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.884719] device-mapper: uevent: version 1.0.3 [ 0.884854] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 0.884917] EISA: Probing bus 0 at eisa.0 [ 0.884921] EISA: Cannot allocate resource for mainboard [ 0.884925] Cannot allocate resource for EISA slot 1 [ 0.884929] Cannot allocate resource for EISA slot 2 [ 0.884932] Cannot allocate resource for EISA slot 3 [ 0.884936] Cannot allocate resource for EISA slot 4 [ 0.884940] Cannot allocate resource for EISA slot 5 [ 0.884943] Cannot allocate resource for EISA slot 6 [ 0.884947] Cannot allocate resource for EISA slot 7 [ 0.884950] Cannot allocate resource for EISA slot 8 [ 0.884954] EISA: Detected 0 cards. [ 0.884969] cpufreq-nforce2: No nForce2 chipset. [ 0.884973] cpuidle: using governor ladder [ 0.884976] cpuidle: using governor menu [ 0.884980] EFI Variables Facility v0.08 2004-May-17 [ 0.885476] TCP cubic registered [ 0.885708] NET: Registered protocol family 10 [ 0.886771] NET: Registered protocol family 17 [ 0.886799] Registering the dns_resolver key type [ 0.886837] Using IPI No-Shortcut mode [ 0.887028] PM: Hibernation image not present or could not be loaded. [ 0.887047] registered taskstats version 1 [ 0.902579] Magic number: 12:339:388 [ 0.902592] usb usb6: hash matches [ 0.902687] rtc_cmos 00:03: setting system clock to 2012-05-11 16:23:41 UTC (1336753421) [ 0.903185] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.903189] EDD information not available. [ 1.170710] ata3: SATA link down (SStatus 0 SControl 300) [ 1.181439] ata4: SATA link down (SStatus 0 SControl 300) [ 1.288020] Refined TSC clocksource calibration: 2499.999 MHz. [ 1.288028] Switching to clocksource tsc [ 1.292016] usb 1-5: new high-speed USB device number 3 using ehci_hcd [ 1.486745] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.486762] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.640115] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.640130] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.648342] ata1.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 1.648348] ata1.00: 490234752 sectors, multi 0: LBA48 [ 1.664325] ata1.00: configured for UDMA/133 [ 1.664531] scsi 0:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 1.664745] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB) [ 1.664809] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.664838] sd 0:0:0:0: [sda] Write Protect is off [ 1.664843] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.664884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.691699] sda: sda1 sda2 sda3 sda4 [ 1.692348] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.692461] Freeing unused kernel memory: 740k freed [ 1.692820] Write protecting the kernel text: 5828k [ 1.692851] Write protecting the kernel read-only data: 2376k [ 1.692854] NX-protecting the kernel data: 4412k [ 1.723980] udevd[92]: starting version 175 [ 1.865339] Floppy drive(s): fd0 is 1.44M [ 1.865429] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.865478] pata_jmicron 0000:03:00.0: setting latency timer to 64 [ 1.867875] sky2: driver version 1.30 [ 1.867926] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.867942] sky2 0000:04:00.0: setting latency timer to 64 [ 1.867979] sky2 0000:04:00.0: Yukon-2 EC chip revision 2 [ 1.868111] sky2 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.868174] scsi4 : pata_jmicron [ 1.869802] sky2 0000:04:00.0: eth0: addr 00:01:29:a4:16:0a [ 1.869828] scsi5 : pata_jmicron [ 1.869943] ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16 [ 1.869949] ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16 [ 1.880053] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 1.884052] FDC 0 is a post-1991 82077 [ 2.032611] ata5.00: ATAPI: _NEC DVD+/-RW ND-3450A, 103C, max UDMA/33 [ 2.048585] ata5.00: configured for UDMA/33 [ 2.049777] scsi 4:0:0:0: CD-ROM _NEC DVD+-RW ND-3450A 103C PQ: 0 ANSI: 5 [ 2.051048] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.051054] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.051283] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.051483] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.079838] usbcore: registered new interface driver usbhid [ 2.079844] usbhid: USB HID core driver [ 2.236660] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.150230] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.177342] udevd[333]: starting version 175 [ 12.195524] Adding 417684k swap on /dev/sda2. Priority:-1 extents:1 across:417684k [ 12.278032] lp: driver loaded but no devices found [ 12.516456] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-1/input2 [ 12.520297] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/input/input2 [ 12.520753] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:1a.1-1:1 [ 12.523286] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/input/input3 [ 12.524439] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:1a.1-1:2 [ 12.545746] type=1400 audit(1336771433.137:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=502 comm="apparmor_parser" [ 12.546574] type=1400 audit(1336771433.137:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=502 comm="apparmor_parser" [ 12.547034] type=1400 audit(1336771433.137:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser" [ 12.626869] Linux video capture interface: v2.00 [ 12.649104] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081a) [ 12.668665] input: UVC Camera (046d:081a) as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input4 [ 12.668909] usbcore: registered new interface driver uvcvideo [ 12.668914] USB Video Class driver (1.1.1) [ 12.697645] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.697721] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 12.697760] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 12.706772] nvidia: module license 'NVIDIA' taints kernel. [ 12.706778] Disabling lock debugging due to kernel taint [ 12.735428] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.350252] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.350267] nvidia 0000:01:00.0: setting latency timer to 64 [ 13.350275] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 13.351464] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012 [ 13.356785] hda_codec: ALC889A: BIOS auto-probing. [ 13.357267] init: failsafe main process (658) killed by TERM signal [ 13.372756] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 13.373173] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 13.373568] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 13.373954] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 13.374339] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 13.374715] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 13.375109] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 13.375724] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 13.475252] type=1400 audit(1336771434.065:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=735 comm="apparmor_parser" [ 13.477026] type=1400 audit(1336771434.069:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=735 comm="apparmor_parser" [ 13.477695] type=1400 audit(1336771434.069:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=735 comm="apparmor_parser" [ 13.479048] type=1400 audit(1336771434.069:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=734 comm="apparmor_parser" [ 13.488994] type=1400 audit(1336771434.081:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=738 comm="apparmor_parser" [ 13.489972] type=1400 audit(1336771434.081:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=738 comm="apparmor_parser" [ 13.

    Read the article

  • Unable to install flash plugin in Ubuntu 12.04

    - by Farhat
    Yesterday I upgraded from Ubuntu 11.10 to Ubuntu 12.04 (64 bit). The upgrade went smoothly (far more than I expected). Unfortunately, I cannot seem to install the flash plugin in either Firefox or Chrome. chrome://plugins does not show flash. I tried 19:17farhat ~$ sudo apt-get install flashplugin-installer Reading package lists... Done Building dependency tree Reading state information... Done flashplugin-installer is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Yet, I cannot seem to find anything related to flash on the system. 19:17farhat ~$ sudo updatedb [sudo] password for farhat: 19:17farhat ~$ locate libflashplayer.so 19:17farhat ~$ locate libflashplayer 19:17farhat ~$ locate libflash /usr/lib/libreoffice/program/libflashlo.so 19:17farhat ~$ I am at the end of everything I know. Any help will be appreciated. I have tried removing and reinstalling the package. Still the same results.

    Read the article

  • Join Us at Oracle OpenWorld Latin America (Dec 4-6)

    - by Zeynep Koch
    Hello to all Latin Americans,  Oracle Openworld Latin America is starting tomorrow. Oracle Linux will be showcased in different sessions and in the exhibition area. Here's some of the links and details to our sessions: Session Schedules: http://www.oracle.com/openworld/lad-en/session-schedule/index.html Oracle Linux sessions: New Features in Oracle Linux: A Technical Deep Dive,    Dec 4, 13:30-14:30, Mezzanine Room 7 Oracle Linux Strategy and Roadmap,   Dec 4, 17:15-18:15, Mezzanine Room 5 Oracle OpenWorld Latin America Exhibition Halls Hours Tuesday, December 4 12:00–19:3018:15–19:30 (Dedicated Hours)Wednesday, December 511:00–19:3018:30–19:30 (Dedicated Hours)Thursday, December 6 11:00–19:0017:45–19:00 (Dedicated Hours) We will also hand out the following in our booth, don't forget to visit us: - Oracle Linux and Oracle VM DVD Kit  - Server Virtualization for Dummies  See you there :)

    Read the article

  • Unable to commit file through svn, server sent truncated HTTP response body

    - by Rocket3G
    I have my own VPS, on which I want to run a simple SVN + chiliproject setup. I have re-installed SVN, CHILI and the OS several times, and it always works for a couple of hours/days and then it just stops working. Well, everything works, except I can't upload any files. Committing directories seems to work just fine, but when I try to commit a file it breaks. I have an error log file, which gives me the following text when I try to commit something x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "OPTIONS /project HTTP/1.1" 200 149 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "PROPFIND /project HTTP/1.1" 207 346 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "MKACTIVITY /project/!svn/act/c11d45ac-86b6-184a-ac5a-9a1105d64563 HTTP/1.1" 401 345 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "MKACTIVITY /project/!svn/act/c11d45ac-86b6-184a-ac5a-9a1105d64563 HTTP/1.1" 201 262 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "PROPFIND /project HTTP/1.1" 207 236 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "CHECKOUT /project/!svn/vcc/default HTTP/1.1" 201 271 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "PROPPATCH /project/!svn/wbl/c11d45ac-86b6-184a-ac5a-9a1105d64563/1 HTTP/1.1" 207 267 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "CHECKOUT /project/!svn/ver/1 HTTP/1.1" 201 271 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "HEAD /project/index.html HTTP/1.1" 404 - x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "PUT /project/!svn/wrk/c11d45ac-86b6-184a-ac5a-9a1105d64563/index.html HTTP/1.1" 201 269 x.x.x.x - admin [19/Oct/2013:00:02:04 +0200] "DELETE /project/!svn/act/c11d45ac-86b6-184a-ac5a-9a1105d64563 HTTP/1.1" 204 - So it seems that it PUTs the file (test.html) correctly, and somehow somewhere something is wrong (file permissions are alright, when I purposely stated that they are wrong, it gave me errors, which is expected, and they were about the file permissions being incorrect. The odd thing is that files won't get added, but directories are fine. I also have enough storage left on my machine. What I should note, perhaps, is that I use Ubuntu 12.04.3 with ruby 1.9.3, mysql 14.14 and I have it set up that Chiliproject handles the authentication and authorization for the project. It works, because I can commit directories and read it all correctly, though I can't upload files. Help would really be appreciated, as I don't know what on earth is going on with this 'truncated http response body'. I tried to read them with wireshark, but it basically gave me the same information. With regards, Ps. I have no clue what the delay between put and delete is, as it's a file of a mere 500 bytes, so it's uploaded in approximately a second. Pps. I copied this question from StackOverflow to this site, as I didn't know the existence of this site and another user suggested that I'd get more answers here, as it's basically a server fault.

    Read the article

  • routing through multiple subinterfaces in debian

    - by Kstro21
    my question is as simple as the title, i have a debian 6 , 2 NICs, 3 different subnets in a single interface, just like this: auto eth0 iface eth0 inet static address 192.168.106.254 netmask 255.255.255.0 auto eth0:0 iface eth0:0 inet static address 172.19.221.81 netmask 255.255.255.248 auto eth0:1 iface eth0:1 inet static address 192.168.254.1 netmask 255.255.255.248 auto eth1 iface eth1 inet static address 172.19.216.3 netmask 255.255.255.0 gateway 172.19.216.13 eth0 is conected to a swith with 3 differents vlans, eth1 is conected to a router. No iptables DROP, so, all traffic is allowed. Now, passing the traffic through eth0 is OK, passing the traffic through eth0:0 is OK, but, passing the traffic through eth0:1 is not working, i can ping the ip address of that sub interface from a pc where this ip is the default gateway, but can't get to servers in the subnet of the eth1 interface, the traffic is not passing, even when i set the iptables to log all the traffic in the FORWARD chain and i can see the traffic there, but, the traffic is not really passing. And the funny is i can do any the other way around, i mean, passing from eth1 to eth0:1, RDP, telnet, ping, etc, doing some work with the iptable, i manage to pass some traffic from eth0:1 to eth1, the iptables look like this: iptables -t nat PREROUTING -d 192.168.254.1/32 -p tcp -m multiport --dports 25,110,5269 -j DNAT --to-destination 172.19.216.1 iptables -t nat PREROUTING -d 192.168.254.1/32 -p udp -m udp --dport 53 -j DNAT --to-destination 172.19.216.9 iptables -t nat PREROUTING -d 192.168.254.1/32 -p tcp -m tcp --dport 21 -j DNAT --to-destination 172.19.216.11 iptables -t nat POSTROUTING -s 172.19.216.0/24 -d 172.19.221.80/29 -j SNAT --to-source 172.19.221.81 iptables -t nat POSTROUTING -s 172.19.216.0/24 -d 192.168.254.0/29 -j SNAT --to-source 192.168.254.1 iptables -t nat POSTROUTING -s 172.19.216.0/24 -o eth0 -j SNAT --to-source 192.168.106.254 dong this is working, but,it is really a headache have to map each port with the server, imagine if i move the service from server, so, now i have doubts: can debian route through multiple subinterfaces?? exist a limit for this?? if not, what i'm doing wrong when i have the same setup with other subnets and it is working ok?? without the iptables rules in the nat, it doesn't work thanks and i hope good comments/answers

    Read the article

  • how to use kml file in my code..

    - by zjm1126
    i download a kml file : <?xml version="1.0" encoding="UTF-8"?> <kml xmlns="http://www.opengis.net/kml/2.2"> <Document> <Style id="transGreenPoly"> <LineStyle> <width>1.5</width> </LineStyle> <PolyStyle> <color>7d00ff00</color> </PolyStyle> </Style> <Style id="transYellowPoly"> <LineStyle> <width>1.5</width> </LineStyle> <PolyStyle> <color>7d00ffff</color> </PolyStyle> </Style> <Style id="transRedPoly"> <LineStyle> <width>1.5</width> </LineStyle> <PolyStyle> <color>7d0000ff</color> </PolyStyle> </Style> <Style id="transBluePoly"> <LineStyle> <width>1.5</width> </LineStyle> <PolyStyle> <color>7dff0000</color> </PolyStyle> </Style> <Folder> <name>Placemarks</name> <open>0</open> <Placemark> <name>Simple placemark</name> <description>Attached to the ground. Intelligently places itself at the height of the underlying terrain.</description> <Point> <coordinates>-122.0822035425683,37.42228990140251,0</coordinates> </Point> </Placemark> <Placemark> <name>Descriptive HTML</name> <description><![CDATA[Click on the blue link!<br/><br/> Placemark descriptions can be enriched by using many standard HTML tags.<br/> For example: <hr/> Styles:<br/> <i>Italics</i>, <b>Bold</b>, <u>Underlined</u>, <s>Strike Out</s>, subscript<sub>subscript</sub>, superscript<sup>superscript</sup>, <big>Big</big>, <small>Small</small>, <tt>Typewriter</tt>, <em>Emphasized</em>, <strong>Strong</strong>, <code>Code</code> <hr/> Fonts:<br/> <font color="red">red by name</font>, <font color="#408010">leaf green by hexadecimal RGB</font> <br/> <font size=1>size 1</font>, <font size=2>size 2</font>, <font size=3>size 3</font>, <font size=4>size 4</font>, <font size=5>size 5</font>, <font size=6>size 6</font>, <font size=7>size 7</font> <br/> <font face=times>Times</font>, <font face=verdana>Verdana</font>, <font face=arial>Arial</font><br/> <hr/> Links: <br/> <a href="http://earth.google.com/">Google Earth!</a> <br/> or: Check out our website at www.google.com <hr/> Alignment:<br/> <p align=left>left</p> <p align=center>center</p> <p align=right>right</p> <hr/> Ordered Lists:<br/> <ol><li>First</li><li>Second</li><li>Third</li></ol> <ol type="a"><li>First</li><li>Second</li><li>Third</li></ol> <ol type="A"><li>First</li><li>Second</li><li>Third</li></ol> <hr/> Unordered Lists:<br/> <ul><li>A</li><li>B</li><li>C</li></ul> <ul type="circle"><li>A</li><li>B</li><li>C</li></ul> <ul type="square"><li>A</li><li>B</li><li>C</li></ul> <hr/> Definitions:<br/> <dl> <dt>Google:</dt><dd>The best thing since sliced bread</dd> </dl> <hr/> Centered:<br/><center> Time present and time past<br/> Are both perhaps present in time future,<br/> And time future contained in time past.<br/> If all time is eternally present<br/> All time is unredeemable.<br/> </center> <hr/> Block Quote: <br/> <blockquote> We shall not cease from exploration<br/> And the end of all our exploring<br/> Will be to arrive where we started<br/> And know the place for the first time.<br/> <i>-- T.S. Eliot</i> </blockquote> <br/> <hr/> Headings:<br/> <h1>Header 1</h1> <h2>Header 2</h2> <h3>Header 3</h3> <h3>Header 4</h4> <h3>Header 5</h5> <hr/> Images:<br/> <i>Remote image</i><br/> <img src="http://code.google.com/apis/kml/documentation/googleSample.png"><br/> <i>Scaled image</i><br/> <img src="http://code.google.com/apis/kml/documentation/googleSample.png" width=100><br/> <hr/> Simple Tables:<br/> <table border="1" padding="1"> <tr><td>1</td><td>2</td><td>3</td><td>4</td><td>5</td></tr> <tr><td>a</td><td>b</td><td>c</td><td>d</td><td>e</td></tr> </table> <br/>]]></description> <Point> <coordinates>-122,37,0</coordinates> </Point> </Placemark> </Folder> <Folder> <name>Google Campus - Polygons</name> <open>0</open> <description>A collection showing how easy it is to create 3-dimensional buildings</description> <Placemark> <name>Building 40</name> <styleUrl>#transRedPoly</styleUrl> <Polygon> <extrude>1</extrude> <altitudeMode>relativeToGround</altitudeMode> <outerBoundaryIs> <LinearRing> <coordinates> -122.0848938459612,37.42257124044786,17 -122.0849580979198,37.42211922626856,17 -122.0847469573047,37.42207183952619,17 -122.0845725380962,37.42209006729676,17 -122.0845954886723,37.42215932700895,17 -122.0838521118269,37.42227278564371,17 -122.083792243335,37.42203539112084,17 -122.0835076656616,37.42209006957106,17 -122.0834709464152,37.42200987395161,17 -122.0831221085748,37.4221046494946,17 -122.0829247374572,37.42226503990386,17 -122.0829339169385,37.42231242843094,17 -122.0833837359737,37.42225046087618,17 -122.0833607854248,37.42234159228745,17 -122.0834204551642,37.42237075460644,17 -122.083659133885,37.42251292011001,17 -122.0839758438952,37.42265873093781,17 -122.0842374743331,37.42265143972521,17 -122.0845036949503,37.4226514386435,17 -122.0848020460801,37.42261133916315,17 -122.0847882750515,37.42256395055121,17 -122.0848938459612,37.42257124044786,17 </coordinates> </LinearRing> </outerBoundaryIs> </Polygon> </Placemark> <Placemark> <name>Building 41</name> <styleUrl>#transBluePoly</styleUrl> <Polygon> <extrude>1</extrude> <altitudeMode>relativeToGround</altitudeMode> <outerBoundaryIs> <LinearRing> <coordinates> -122.0857412771483,37.42227033155257,17 -122.0858169768481,37.42231408832346,17 -122.085852582875,37.42230337469744,17 -122.0858799945639,37.42225686138789,17 -122.0858860101409,37.4222311076138,17 -122.0858069157288,37.42220250173855,17 -122.0858379542653,37.42214027058678,17 -122.0856732640519,37.42208690214408,17 -122.0856022926407,37.42214885429042,17 -122.0855902778436,37.422128290487,17 -122.0855841672237,37.42208171967246,17 -122.0854852065741,37.42210455874995,17 -122.0855067264352,37.42214267949824,17 -122.0854430712915,37.42212783846172,17 -122.0850990714904,37.42251282407603,17 -122.0856769818632,37.42281815323651,17 -122.0860162273783,37.42244918858723,17 -122.0857260327004,37.42229239604253,17 -122.0857412771483,37.42227033155257,17 </coordinates> </LinearRing> </outerBoundaryIs> </Polygon> </Placemark> <Placemark> <name>Building 42</name> <styleUrl>#transGreenPoly</styleUrl> <Polygon> <extrude>1</extrude> <altitudeMode>relativeToGround</altitudeMode> <outerBoundaryIs> <LinearRing> <coordinates> -122.0857862287242,37.42136208886969,25 -122.0857312990603,37.42136935989481,25 -122.0857312992918,37.42140934910903,25 -122.0856077073679,37.42138390166565,25 -122.0855802426516,37.42137299550869,25 -122.0852186221971,37.42137299504316,25 -122.0852277765639,37.42161656508265,25 -122.0852598189347,37.42160565894403,25 -122.0852598185499,37.42168200156,25 -122.0852369311478,37.42170017860346,25 -122.0852643957828,37.42176197982575,25 -122.0853239032746,37.42176198013907,25 -122.0853559454324,37.421852864452,25 -122.0854108752463,37.42188921823734,25 -122.0854795379357,37.42189285337048,25 -122.0855436229819,37.42188921797546,25 -122.0856260178042,37.42186013499926,25 -122.085937287963,37.42186013453605,25 -122.0859428718666,37.42160898590042,25 -122.0859655469861,37.42157992759144,25 -122.0858640462341,37.42147115002957,25 -122.0858548911215,37.42140571326184,25 -122.0858091162768,37.4214057134039,25 -122.0857862287242,37.42136208886969,25 </coordinates> </LinearRing> </outerBoundaryIs> </Polygon> </Placemark> <Placemark> <name>Building 43</name> <styleUrl>#transYellowPoly</styleUrl> <Polygon> <extrude>1</extrude> <altitudeMode>relativeToGround</altitudeMode> <outerBoundaryIs> <LinearRing> <coordinates> -122.0844371128284,37.42177253003091,19 -122.0845118855746,37.42191111542896,19 -122.0850470999805,37.42178755121535,19 -122.0850719913391,37.42143663023161,19 -122.084916406232,37.42137237822116,19 -122.0842193868167,37.42137237801626,19 -122.08421938659,37.42147617161496,19 -122.0838086419991,37.4214613409357,19 -122.0837899728564,37.42131306410796,19 -122.0832796534698,37.42129328840593,19 -122.0832609819207,37.42139213944298,19 -122.0829373621737,37.42137236399876,19 -122.0829062425667,37.42151569778871,19 -122.0828502269665,37.42176282576465,19 -122.0829435788635,37.42176776969635,19 -122.083217411188,37.42179248552686,19 -122.0835970430103,37.4217480074456,19 -122.0839455556771,37.42169364237603,19 -122.0840077894637,37.42176283815853,19 -122.084113587521,37.42174801104392,19 -122.0840762473784,37.42171341292375,19 -122.0841447047739,37.42167881534569,19 -122.084144704223,37.42181720660197,19 -122.0842503333074,37.4218170700446,19 -122.0844371128284,37.42177253003091,19 </coordinates> </LinearRing> </outerBoundaryIs> </Polygon> </Placemark> </Folder> <Folder> <name>LineString</name> <open>0</open> <Placemark> <LineString> <tessellate>1</tessellate> <coordinates> -112.0814237830345,36.10677870477137,0 -112.0870267752693,36.0905099328766,0 </coordinates> </LineString> </Placemark> </Folder> <Folder> <name>GroundOverlay</name> <open>0</open> <GroundOverlay> <name>Large-scale overlay on terrain</name> <description>Overlay shows Mount Etna erupting on July 13th, 2001.</description> <Icon> <href>http://code.google.com/apis/kml/documentation/etna.jpg</href> </Icon> <LatLonBox> <north>37.91904192681665</north> <south>37.46543388598137</south> <east>15.35832653742206</east> <west>14.60128369746704</west> </LatLonBox> </GroundOverlay> </Folder> <Folder> <name>ScreenOverlays</name> <open>0</open> <ScreenOverlay> <name>screenoverlay_dynamic_top</name> <visibility>0</visibility> <Icon> <href>http://code.google.com/apis/kml/documentation/dynamic_screenoverlay.jpg</href> </Icon> <overlayXY x="0" y="1" xunits="fraction" yunits="fraction"/> <screenXY x="0" y="1" xunits="fraction" yunits="fraction"/> <rotationXY x="0" y="0" xunits="fraction" yunits="fraction"/> <size x="1" y="0.2" xunits="fraction" yunits="fraction"/> </ScreenOverlay> <ScreenOverlay> <name>screenoverlay_dynamic_right</name> <visibility>0</visibility> <Icon> <href>http://code.google.com/apis/kml/documentation/dynamic_right.jpg</href> </Icon> <overlayXY x="1" y="1" xunits="fraction" yunits="fraction"/> <screenXY x="1" y="1" xunits="fraction" yunits="fraction"/> <rotationXY x="0" y="0" xunits="fraction" yunits="fraction"/> <size x="0" y="1" xunits="fraction" yunits="fraction"/> </ScreenOverlay> <ScreenOverlay> <name>Simple crosshairs</name> <visibility>0</visibility> <description>This screen overlay uses fractional positioning to put the image in the exact center of the screen</description> <Icon> <href>http://code.google.com/apis/kml/documentation/crosshairs.png</href> </Icon> <overlayXY x="0.5" y="0.5" xunits="fraction" yunits="fraction"/> <screenXY x="0.5" y="0.5" xunits="fraction" yunits="fraction"/> <rotationXY x="0.5" y="0.5" xunits="fraction" yunits="fraction"/> <size x="0" y="0" xunits="pixels" yunits="pixels"/> </ScreenOverlay> <ScreenOverlay> <name>screenoverlay_absolute_topright</name> <visibility>0</visibility> <Icon> <href>http://code.google.com/apis/kml/documentation/top_right.jpg</href> </Icon> <overlayXY x="1" y="1" xunits="fraction" yunits="fraction"/> <screenXY x="1" y="1" xunits="fraction" yunits="fraction"/> <rotationXY x="0" y="0" xunits="fraction" yunits="fraction"/> <size x="0" y="0" xunits="fraction" yunits="fraction"/> </ScreenOverlay> <ScreenOverlay> <name>screenoverlay_absolute_topleft</name> <visibility>0</visibility> <Icon> <href>http://code.google.com/apis/kml/documentation/top_left.jpg</href> </Icon> <overlayXY x="0" y="1" xunits="fraction" yunits="fraction"/> <screenXY x="0" y="1" xunits="fraction" yunits="fraction"/> <rotationXY x="0" y="0" xunits="fraction" yunits="fraction"/> <size x="0" y="0" xunits="fraction" yunits="fraction"/> </ScreenOverlay> <ScreenOverlay> <name>screenoverlay_absolute_bottomright</name> <visibility>0</visibility> <Icon> <href>http://code.google.com/apis/kml/documentation/bottom_right.jpg</href> </Icon> <overlayXY x="1" y="-1" xunits="fraction" yunits="fraction"/> <screenXY x="1" y="0" xunits="fraction" yunits="fraction"/> <rotationXY x="0" y="0" xunits="fraction" yunits="fraction"/> <size x="0" y="0" xunits="fraction" yunits="fraction"/> </ScreenOverlay> <ScreenOverlay> <name>screenoverlay_absolute_bottomleft</name> <visibility>0</visibility> <Icon> <href>http://code.google.com/apis/kml/documentation/bottom_left.jpg</href> </Icon> <overlayXY x="0" y="-1" xunits="fraction" yunits="fraction"/> <screenXY x="0" y="0" xunits="fraction" yunits="fraction"/> <rotationXY x="0" y="0" xunits="fraction" yunits="fraction"/> <size x="0" y="0" xunits="fraction" yunits="fraction"/> </ScreenOverlay> </Folder> </Document> </kml> and my code is : function initialize() { if (GBrowserIsCompatible()) { var map = new GMap2(document.getElementById("map_canvas")); var center=new GLatLng(39.9493, 116.3975); map.setCenter(center, 13); var geoXml = new GGeoXml("SamplesInMaps.kml"); <!--Place KML on Map --> map.addOverlay(geoXml); } } but ,i don't successful ,, do you know how to do this.. thanks

    Read the article

  • When I shutdown the computer, it restarts

    - by Prabu
    I am unable to shutdown. Whenever I try to shutdown, it reboots. I am running Ubuntu 12.10. I have run the boot-repair and this is the result: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for (,msdos1)/boot/grub. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.10 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/i386-pc/core.img sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 1,936,809,983 1,936,807,936 83 Linux /dev/sda2 1,936,812,030 1,953,523,711 16,711,682 5 Extended /dev/sda5 1,936,812,032 1,953,523,711 16,711,680 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 229a5484-7659-4ce1-98ce-2f05f61a1ffa ext4 /dev/sda5 6c6dca25-ab67-4de4-8602-26fdb6154781 swap /dev/sr0 iso9660 Ubuntu 12.10 amd64 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff initrd /boot/initrd.img-3.5.0-19-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { menuentry 'Ubuntu, with Linux 3.5.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=6c6dca25-ab67-4de4-8602-26fdb6154781 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 200.155235291 = 214.915047424 boot/grub/grub.cfg 1 40.280788422 = 43.251167232 boot/initrd.img-3.5.0-17-generic 1 2.468288422 = 2.650304512 boot/initrd.img-3.5.0-19-generic 1 200.149234772 = 214.908604416 boot/vmlinuz-3.5.0-17-generic 1 1.990135193 = 2.136891392 boot/vmlinuz-3.5.0-19-generic 1 2.468288422 = 2.650304512 initrd.img 1 1.990135193 = 2.136891392 vmlinuz 1 1.990135193 = 2.136891392 vmlinuz.old 1 =============================== StdErr Messages: =============================== cat: write error: Broken pipe File descriptor 8 (/proc/6297/mounts) leaked on lvscan invocation. Parent PID 13390: bash No volume groups found ADDITIONAL INFORMATION : =================== log of boot-repair 2012-12-17__01h53 =================== boot-repair version : 3.197~ppa1~quantal boot-sav version : 3.197~ppa1~quantal glade2script version : 3.2.2~ppa45~quantal boot-sav-extra version : 3.197~ppa1~quantal boot-repair is executed in live-session (Ubuntu 12.10, quantal, Ubuntu, x86_64) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity =================== os-prober: /dev/sda1:Ubuntu 12.10 (12.10):Ubuntu:linux =================== blkid: /dev/loop0: TYPE="squashfs" /dev/sr0: LABEL="Ubuntu 12.10 amd64" TYPE="iso9660" /dev/sda1: UUID="229a5484-7659-4ce1-98ce-2f05f61a1ffa" TYPE="ext4" /dev/sda5: UUID="6c6dca25-ab67-4de4-8602-26fdb6154781" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== sda1/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== sda1/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Oct 17 14:59 grub.d total 72 -rwxr-xr-x 1 root root 7541 Oct 14 17:36 00_header -rwxr-xr-x 1 root root 5488 Oct 4 09:30 05_debian_theme -rwxr-xr-x 1 root root 10891 Oct 14 17:36 10_linux -rwxr-xr-x 1 root root 10258 Oct 14 17:36 20_linux_xen -rwxr-xr-x 1 root root 1688 Oct 11 14:10 20_memtest86+ -rwxr-xr-x 1 root root 10976 Oct 14 17:36 30_os-prober -rwxr-xr-x 1 root root 1426 Oct 14 17:36 30_uefi-firmware -rwxr-xr-x 1 root root 214 Oct 14 17:36 40_custom -rwxr-xr-x 1 root root 216 Oct 14 17:36 41_custom -rw-r--r-- 1 root root 483 Oct 14 17:36 README =================== UEFI/Legacy mode: This live-session is not in EFI-mode. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes =================== parted -l: Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 992GB 992GB primary ext4 boot 2 992GB 1000GB 8556MB extended 5 992GB 1000GB 8556MB logical linux-swap(v1) Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== parted -lm: BYT; /dev/sda:1000GB:scsi:512:4096:msdos:ATA ST1000DM003-1CH1; 1:1049kB:992GB:992GB:ext4::boot; 2:992GB:1000GB:8556MB:::; 5:992GB:1000GB:8556MB:linux-swap(v1)::; Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu) /dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb vga_arbiter vhost-net zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 3.9G 100M 3.8G 3% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run /dev/sr0 iso9660 763M 763M 0 100% /cdrom /dev/loop0 squashfs 717M 717M 0 100% /rofs tmpfs tmpfs 3.9G 32K 3.9G 1% /tmp none tmpfs 5.0M 4.0K 5.0M 1% /run/lock none tmpfs 3.9G 176K 3.9G 1% /run/shm none tmpfs 100M 52K 100M 1% /run/user /dev/sda1 ext4 910G 26G 838G 3% /mnt/boot-sav/sda1 =================== fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000da1e9 Device Boot Start End Blocks Id System /dev/sda1 * 2048 1936809983 968403968 83 Linux /dev/sda2 1936812030 1953523711 8355841 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 1936812032 1953523711 8355840 82 Linux swap / Solaris Partition outside the disk detected. =================== Recommended repair Recommended-Repair This setting will reinstall the grub2 of sda1 into the MBR of sda. Additional repair will be performed: unhide-bootmenu-10s Unhide GRUB boot menu in sda1/etc/default/grub grub-install (GRUB) 2.00-7ubuntu11,grub-install (GRUB) 2. Reinstall the GRUB of sda1 into the MBR of sda Installation finished. No error reported. grub-install /dev/sda: exit code of grub-install /dev/sda:0 chroot /mnt/boot-sav/sda1 update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.5.0-19-generic Found initrd image: /boot/initrd.img-3.5.0-19-generic Found linux image: /boot/vmlinuz-3.5.0-17-generic Found initrd image: /boot/initrd.img-3.5.0-17-generic Found memtest86+ image: /boot/memtest86+.bin Unhide GRUB boot menu in sda1/boot/grub/grub.cfg Boot successfully repaired. You can now reboot your computer.

    Read the article

  • Yum Update Failing mod_ssl and glibc_devel

    - by Kerry
    Any ideas on how to get this to not fail? # yum update Freeing read locks for locker 0x82: 4189/140342084876032 Freeing read locks for locker 0x84: 4189/140342084876032 Freeing read locks for locker 0x85: 4189/140342084876032 Freeing read locks for locker 0x86: 4189/140342084876032 Freeing read locks for locker 0x87: 4189/140342084876032 Freeing read locks for locker 0x9a: 4189/140342084876032 Freeing read locks for locker 0x9c: 4189/140342084876032 Freeing read locks for locker 0x9d: 4189/140342084876032 Freeing read locks for locker 0x9e: 4189/140342084876032 Freeing read locks for locker 0x9f: 4189/140342084876032 Freeing read locks for locker 0xa0: 4189/140342084876032 Freeing read locks for locker 0xa1: 4189/140342084876032 Freeing read locks for locker 0xa2: 4189/140342084876032 Freeing read locks for locker 0xa3: 4189/140342084876032 Freeing read locks for locker 0xa4: 4189/140342084876032 Freeing read locks for locker 0xa5: 4189/140342084876032 Freeing read locks for locker 0xa6: 4189/140342084876032 Freeing read locks for locker 0xa7: 4189/140342084876032 Freeing read locks for locker 0xa8: 4189/140342084876032 Freeing read locks for locker 0xa9: 4189/140342084876032 Freeing read locks for locker 0xaa: 4189/140342084876032 Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.hmc.edu * epel: mirrors.kernel.org * extras: centos.mirror.freedomvoice.com * updates: mirrors.sonic.net Setting up Update Process Resolving Dependencies There are unfinished transactions remaining. You might consider running yum-complete-transaction first to finish them. The program yum-complete-transaction is found in the yum-utils package. --> Running transaction check ---> Package device-mapper-persistent-data.x86_64 0:0.2.8-2.el6 will be updated ---> Package device-mapper-persistent-data.x86_64 0:0.2.8-4.el6_5 will be an update ---> Package glibc-headers.x86_64 0:2.12-1.132.el6 will be updated --> Processing Dependency: glibc-headers = 2.12-1.132.el6 for package: glibc-devel-2.12-1.132.el6.x86_64 ---> Package glibc-headers.x86_64 0:2.12-1.132.el6_5.2 will be an update ---> Package httpd.x86_64 0:2.2.15-29.el6.centos will be updated --> Processing Dependency: httpd = 2.2.15-29.el6.centos for package: 1:mod_ssl-2.2.15-29.el6.centos.x86_64 ---> Package httpd.x86_64 0:2.2.15-30.el6.centos will be an update ---> Package kernel.x86_64 0:2.6.32-431.17.1.el6 will be installed ---> Package kernel-devel.x86_64 0:2.6.32-431.17.1.el6 will be installed ---> Package selinux-policy-targeted.noarch 0:3.7.19-231.el6_5.1 will be updated ---> Package selinux-policy-targeted.noarch 0:3.7.19-231.el6_5.3 will be an update --> Finished Dependency Resolution Error: Package: 1:mod_ssl-2.2.15-29.el6.centos.x86_64 (@base) Requires: httpd = 2.2.15-29.el6.centos Removing: httpd-2.2.15-29.el6.centos.x86_64 (@base) httpd = 2.2.15-29.el6.centos Updated By: httpd-2.2.15-30.el6.centos.x86_64 (updates) httpd = 2.2.15-30.el6.centos Error: Package: glibc-devel-2.12-1.132.el6.x86_64 (@base) Requires: glibc-headers = 2.12-1.132.el6 Removing: glibc-headers-2.12-1.132.el6.x86_64 (@base) glibc-headers = 2.12-1.132.el6 Updated By: glibc-headers-2.12-1.132.el6_5.2.x86_64 (updates) glibc-headers = 2.12-1.132.el6_5.2 Available: glibc-headers-2.12-1.132.el6_5.1.x86_64 (updates) glibc-headers = 2.12-1.132.el6_5.1 You could try using --skip-broken to work around the problem ** Found 34 pre-existing rpmdb problem(s), 'yum check' output follows: audit-2.2-4.el6_5.x86_64 is a duplicate with audit-2.2-2.el6.x86_64 audit-libs-2.2-4.el6_5.x86_64 is a duplicate with audit-libs-2.2-2.el6.x86_64 curl-7.19.7-37.el6_5.3.x86_64 is a duplicate with curl-7.19.7-37.el6_4.x86_64 device-mapper-multipath-0.4.9-72.el6_5.2.x86_64 is a duplicate with device-mapper-multipath-0.4.9-72.el6_5.1.x86_64 device-mapper-multipath-libs-0.4.9-72.el6_5.2.x86_64 is a duplicate with device-mapper-multipath-libs-0.4.9-72.el6_5.1.x86_64 2:ethtool-3.5-1.4.el6_5.x86_64 is a duplicate with 2:ethtool-3.5-1.2.el6_5.x86_64 glibc-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-2.12-1.132.el6.x86_64 glibc-common-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-common-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-devel-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6_5.2.x86_64 has missing requires of glibc-headers = ('0', '2.12', '1.132.el6_5.2') gnutls-2.8.5-14.el6_5.x86_64 is a duplicate with gnutls-2.8.5-13.el6_5.x86_64 httpd-2.2.15-29.el6.centos.x86_64 has missing requires of httpd-tools = ('0', '2.2.15', '29.el6.centos') httpd-manual-2.2.15-30.el6.centos.noarch has missing requires of httpd = ('0', '2.2.15', '30.el6.centos') iproute-2.6.32-32.el6_5.x86_64 is a duplicate with iproute-2.6.32-31.el6.x86_64 kernel-firmware-2.6.32-431.17.1.el6.noarch is a duplicate with kernel-firmware-2.6.32-431.11.2.el6.noarch kernel-headers-2.6.32-431.17.1.el6.x86_64 is a duplicate with kernel-headers-2.6.32-431.11.2.el6.x86_64 kpartx-0.4.9-72.el6_5.2.x86_64 is a duplicate with kpartx-0.4.9-72.el6_5.1.x86_64 krb5-libs-1.10.3-15.el6_5.1.x86_64 is a duplicate with krb5-libs-1.10.3-10.el6_4.6.x86_64 libblkid-2.17.2-12.14.el6_5.x86_64 is a duplicate with libblkid-2.17.2-12.14.el6.x86_64 libcurl-7.19.7-37.el6_5.3.x86_64 is a duplicate with libcurl-7.19.7-37.el6_4.x86_64 libcurl-devel-7.19.7-37.el6_5.3.x86_64 is a duplicate with libcurl-devel-7.19.7-37.el6_4.x86_64 libtasn1-2.3-6.el6_5.x86_64 is a duplicate with libtasn1-2.3-3.el6_2.1.x86_64 libuuid-2.17.2-12.14.el6_5.x86_64 is a duplicate with libuuid-2.17.2-12.14.el6.x86_64 libxml2-2.7.6-14.el6_5.1.x86_64 is a duplicate with libxml2-2.7.6-14.el6.x86_64 mdadm-3.2.6-7.el6_5.2.x86_64 is a duplicate with mdadm-3.2.6-7.el6.x86_64 1:mod_ssl-2.2.15-30.el6.centos.x86_64 is a duplicate with 1:mod_ssl-2.2.15-29.el6.centos.x86_64 1:mod_ssl-2.2.15-30.el6.centos.x86_64 has missing requires of httpd = ('0', '2.2.15', '30.el6.centos') nss-softokn-3.14.3-10.el6_5.x86_64 is a duplicate with nss-softokn-3.14.3-9.el6.x86_64 openssl-1.0.1e-16.el6_5.7.x86_64 is a duplicate with openssl-1.0.1e-16.el6_5.4.x86_64 openssl-1.0.1e-16.el6_5.14.x86_64 is a duplicate with openssl-1.0.1e-16.el6_5.7.x86_64 openssl-devel-1.0.1e-16.el6_5.14.x86_64 is a duplicate with openssl-devel-1.0.1e-16.el6_5.7.x86_64 selinux-policy-3.7.19-231.el6_5.3.noarch is a duplicate with selinux-policy-3.7.19-231.el6_5.1.noarch tzdata-2014d-1.el6.noarch is a duplicate with tzdata-2014b-1.el6.noarch util-linux-ng-2.17.2-12.14.el6_5.x86_64 is a duplicate with util-linux-ng-2.17.2-12.14.el6.x86_64 UPDATE I installed and ran yum-complete-transaction as requested, it finished some things and suggested I run package-cleanup --problems, which yielded this: package-cleanup --problems Loaded plugins: fastestmirror Package httpd-manual-2.2.15-30.el6.centos.noarch requires httpd = ('0', '2.2.15', '30.el6.centos') Package httpd-2.2.15-29.el6.centos.x86_64 requires httpd-tools = ('0', '2.2.15', '29.el6.centos') Package mod_ssl-2.2.15-30.el6.centos.x86_64 requires httpd = ('0', '2.2.15', '30.el6.centos') Package glibc-devel-2.12-1.132.el6_5.2.x86_64 requires glibc-headers = ('0', '2.12', '1.132.el6_5.2') I'm definitely not a sys-admin, what would be the next step? UPDATE 2 I ran yum distro-sync: # yum distro-sync Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.hmc.edu * epel: mirrors.kernel.org * extras: centos.mirror.freedomvoice.com * updates: mirrors.sonic.net Setting up Distribution Synchronization Process Resolving Dependencies --> Running transaction check ---> Package glibc-headers.x86_64 0:2.12-1.132.el6 will be updated --> Processing Dependency: glibc-headers = 2.12-1.132.el6 for package: glibc-devel-2.12-1.132.el6.x86_64 ---> Package glibc-headers.x86_64 0:2.12-1.132.el6_5.2 will be an update ---> Package httpd.x86_64 0:2.2.15-29.el6.centos will be updated --> Processing Dependency: httpd = 2.2.15-29.el6.centos for package: 1:mod_ssl-2.2.15-29.el6.centos.x86_64 ---> Package httpd.x86_64 0:2.2.15-30.el6.centos will be an update --> Finished Dependency Resolution Error: Package: 1:mod_ssl-2.2.15-29.el6.centos.x86_64 (@base) Requires: httpd = 2.2.15-29.el6.centos Removing: httpd-2.2.15-29.el6.centos.x86_64 (@base) httpd = 2.2.15-29.el6.centos Updated By: httpd-2.2.15-30.el6.centos.x86_64 (updates) httpd = 2.2.15-30.el6.centos Error: Package: glibc-devel-2.12-1.132.el6.x86_64 (@base) Requires: glibc-headers = 2.12-1.132.el6 Removing: glibc-headers-2.12-1.132.el6.x86_64 (@base) glibc-headers = 2.12-1.132.el6 Updated By: glibc-headers-2.12-1.132.el6_5.2.x86_64 (updates) glibc-headers = 2.12-1.132.el6_5.2 Available: glibc-headers-2.12-1.132.el6_5.1.x86_64 (updates) glibc-headers = 2.12-1.132.el6_5.1 You could try using --skip-broken to work around the problem ** Found 34 pre-existing rpmdb problem(s), 'yum check' output follows: audit-2.2-4.el6_5.x86_64 is a duplicate with audit-2.2-2.el6.x86_64 audit-libs-2.2-4.el6_5.x86_64 is a duplicate with audit-libs-2.2-2.el6.x86_64 curl-7.19.7-37.el6_5.3.x86_64 is a duplicate with curl-7.19.7-37.el6_4.x86_64 device-mapper-multipath-0.4.9-72.el6_5.2.x86_64 is a duplicate with device-mapper-multipath-0.4.9-72.el6_5.1.x86_64 device-mapper-multipath-libs-0.4.9-72.el6_5.2.x86_64 is a duplicate with device-mapper-multipath-libs-0.4.9-72.el6_5.1.x86_64 2:ethtool-3.5-1.4.el6_5.x86_64 is a duplicate with 2:ethtool-3.5-1.2.el6_5.x86_64 glibc-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-2.12-1.132.el6.x86_64 glibc-common-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-common-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6_5.2.x86_64 is a duplicate with glibc-devel-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6_5.2.x86_64 has missing requires of glibc-headers = ('0', '2.12', '1.132.el6_5.2') gnutls-2.8.5-14.el6_5.x86_64 is a duplicate with gnutls-2.8.5-13.el6_5.x86_64 httpd-2.2.15-29.el6.centos.x86_64 has missing requires of httpd-tools = ('0', '2.2.15', '29.el6.centos') httpd-manual-2.2.15-30.el6.centos.noarch has missing requires of httpd = ('0', '2.2.15', '30.el6.centos') iproute-2.6.32-32.el6_5.x86_64 is a duplicate with iproute-2.6.32-31.el6.x86_64 kernel-firmware-2.6.32-431.17.1.el6.noarch is a duplicate with kernel-firmware-2.6.32-431.11.2.el6.noarch kernel-headers-2.6.32-431.17.1.el6.x86_64 is a duplicate with kernel-headers-2.6.32-431.11.2.el6.x86_64 kpartx-0.4.9-72.el6_5.2.x86_64 is a duplicate with kpartx-0.4.9-72.el6_5.1.x86_64 krb5-libs-1.10.3-15.el6_5.1.x86_64 is a duplicate with krb5-libs-1.10.3-10.el6_4.6.x86_64 libblkid-2.17.2-12.14.el6_5.x86_64 is a duplicate with libblkid-2.17.2-12.14.el6.x86_64 libcurl-7.19.7-37.el6_5.3.x86_64 is a duplicate with libcurl-7.19.7-37.el6_4.x86_64 libcurl-devel-7.19.7-37.el6_5.3.x86_64 is a duplicate with libcurl-devel-7.19.7-37.el6_4.x86_64 libtasn1-2.3-6.el6_5.x86_64 is a duplicate with libtasn1-2.3-3.el6_2.1.x86_64 libuuid-2.17.2-12.14.el6_5.x86_64 is a duplicate with libuuid-2.17.2-12.14.el6.x86_64 libxml2-2.7.6-14.el6_5.1.x86_64 is a duplicate with libxml2-2.7.6-14.el6.x86_64 mdadm-3.2.6-7.el6_5.2.x86_64 is a duplicate with mdadm-3.2.6-7.el6.x86_64 1:mod_ssl-2.2.15-30.el6.centos.x86_64 is a duplicate with 1:mod_ssl-2.2.15-29.el6.centos.x86_64 1:mod_ssl-2.2.15-30.el6.centos.x86_64 has missing requires of httpd = ('0', '2.2.15', '30.el6.centos') nss-softokn-3.14.3-10.el6_5.x86_64 is a duplicate with nss-softokn-3.14.3-9.el6.x86_64 openssl-1.0.1e-16.el6_5.7.x86_64 is a duplicate with openssl-1.0.1e-16.el6_5.4.x86_64 openssl-1.0.1e-16.el6_5.14.x86_64 is a duplicate with openssl-1.0.1e-16.el6_5.7.x86_64 openssl-devel-1.0.1e-16.el6_5.14.x86_64 is a duplicate with openssl-devel-1.0.1e-16.el6_5.7.x86_64 selinux-policy-3.7.19-231.el6_5.3.noarch is a duplicate with selinux-policy-3.7.19-231.el6_5.1.noarch tzdata-2014d-1.el6.noarch is a duplicate with tzdata-2014b-1.el6.noarch util-linux-ng-2.17.2-12.14.el6_5.x86_64 is a duplicate with util-linux-ng-2.17.2-12.14.el6.x86_64

    Read the article

  • Chef: nested data bag data to template file returns "can't convert String into Integer"

    - by Dalho Park
    I'm creating simple test recipe with a template and data bag. What I'm trying to do is creating a config file from data bag that has simple nested information, but I receive error "can't convert String into Integer" Here are my setting file 1) recipe/default.rb data1 = data_bag_item( 'mytest', 'qa' )['test'] data2 = data_bag_item( 'mytest', 'qa' ) template "/opt/env/test.cfg" do source "test.erb" action :create_if_missing mode 0664 owner "root" group "root" variables({ :pepe1 = data1['part.name'], :pepe2 = data2['transport.tcp.ip2'] }) end 2)my data bag named "mytest" $knife data bag show mytest qa id: qa test: part.name: L12 transport.tcp.ip: 111.111.111.111 transport.tcp.port: 9199 transport.tcp.ip2: 222.222.222.222 3)template file test.erb part.name=<%= @pepe1 % transport.tcp.binding=<%= @pepe2 % Error reurns when I run chef-client on my server, [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in from_file' [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in[]',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in block in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:infrom_file' [2013-06-24T19:50:38+00:00] DEBUG: backtrace entry for compile error: '/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in `[]'' [2013-06-24T19:50:38+00:00] DEBUG: Line number of compile error: '19' Recipe Compile Error in /var/chef/cache/cookbooks/config_test/recipes/default.rb TypeError can't convert String into Integer Cookbook Trace: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []' /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file' /var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in `from_file' Relevant File Content: /var/chef/cache/cookbooks/config_test/recipes/default.rb: 12: template "/opt/env/test.cfg" do 13: source "test.erb" 14: action :create_if_missing 15: mode 0664 16: owner "root" 17: group "root" 18: variables({ 19 :pepe1 = data1['part.name'], 20: :pepe2 = data2['transport.tcp.ip2'] 21: }) 22: end 23: I tried many things and if I comment out "pepe1 = data1['part.name'],", then :pepe2 = data2['transport.tcp.ip2'] works fine. only nested data "part.name" cannot be set to @pepe1. Does anyone knows why I receive the errors? thanks,

    Read the article

  • 'skb rides the rocket' on Xen VM

    - by Kye
    I've just set up Ubuntu 13.10 server as a VM on my Ubuntu/Xen server, and I'm getting these weird lines in my syslog. Nov 12 10:26:32 human kernel: [130782.315333] xennet: skb rides the rocket: 19 slots Nov 12 10:26:32 human kernel: [130782.362405] xennet: skb rides the rocket: 20 slots Nov 12 10:26:32 human kernel: [130782.408458] xennet: skb rides the rocket: 19 slots Nov 12 10:26:32 human kernel: [130782.490260] xennet: skb rides the rocket: 20 slots Nov 12 10:26:32 human kernel: [130782.541931] xennet: skb rides the rocket: 19 slots Nov 12 10:26:35 human kernel: [130785.226635] xennet: skb rides the rocket: 19 slots Nov 12 10:26:35 human kernel: [130785.261026] xennet: skb rides the rocket: 21 slots Nov 12 10:26:35 human kernel: [130785.469306] xennet: skb rides the rocket: 19 slots Nov 12 10:26:36 human kernel: [130786.552730] xennet: skb rides the rocket: 21 slots Nov 12 10:26:38 human kernel: [130788.212747] xennet: skb rides the rocket: 20 slots Nov 12 10:26:38 human kernel: [130788.257544] xennet: skb rides the rocket: 19 slots Nov 12 10:26:38 human kernel: [130788.903841] xennet: skb rides the rocket: 19 slots Unsure of what they mean, and Google has nothing meaningful. Any help is appreciated.

    Read the article

  • my webserver with 16GB ram shows all RAM as used, but is it really, see the 'top'

    - by Alex
    I have some questions about my web server. Its a LAMP web server running centos 5.5 and php5, mysql5. The server gets hundreds (maybe thousand) of concurrent users during peak hours. I'm trying to optimize a little and understand "top". From what I can see: all 16GB of my ram have been used up? does that mean that my server needs more memory? My swap is only 2GB, should it be increased? usually during peak hours my server load average first number is about 2.5-3. What could I do to optimize the server so that the load average even during peak doesn't go above 1? In the past I was told a good working server should stay under 1 load, is this still true? Although even during load of 2.5-3, server pages and applications seem to load with pretty good speed. what should the memory size in php.ini be set to? top - 14:30:18 up 2 days, 12:41, 5 users, load average: 1.25, 1.74, 2.92 Tasks: 305 total, 2 running, 302 sleeping, 0 stopped, 1 zombie Cpu(s): 6.3%us, 0.9%sy, 0.0%ni, 92.5%id, 0.2%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 16427200k total, 16111472k used, 315728k free, 3120316k buffers Swap: 2104496k total, 268k used, 2104228k free, 6216756k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 29080 apache 15 0 358m 36m 5192 S 20.2 0.2 2:08.40 httpd 29093 apache 18 0 357m 36m 5192 S 18.2 0.2 2:02.52 httpd 29079 apache 15 0 370m 49m 5832 S 10.0 0.3 2:32.14 httpd 1812 apache 15 0 370m 49m 5196 S 7.3 0.3 2:25.30 httpd 5204 apache 15 0 358m 36m 5168 S 5.3 0.2 0:59.28 httpd 29075 apache 15 0 370m 48m 5184 S 3.3 0.3 2:15.93 httpd 9712 apache 15 0 360m 38m 5180 S 3.0 0.2 0:54.81 httpd 29072 apache 16 0 358m 36m 5192 S 2.7 0.2 2:24.43 httpd 6310 apache 17 0 388m 67m 5180 S 2.3 0.4 0:58.85 httpd 8674 apache 15 0 343m 21m 4980 S 2.0 0.1 0:07.91 httpd 29085 apache 15 0 371m 49m 5224 S 2.0 0.3 2:16.86 httpd 29083 apache 15 0 370m 48m 5196 S 1.7 0.3 2:10.64 httpd 5575 apache 15 0 357m 36m 5228 S 1.3 0.2 0:53.78 httpd 29066 apache 15 0 379m 59m 5860 R 1.3 0.4 2:11.93 httpd 29078 apache 15 0 370m 48m 5188 S 1.3 0.3 2:14.52 httpd 29084 apache 15 0 370m 48m 5208 S 1.0 0.3 2:02.49 httpd 29089 apache 15 0 370m 48m 5188 S 1.0 0.3 2:27.61 httpd 29082 apache 15 0 390m 68m 5188 S 0.7 0.4 2:32.48 httpd 29984 apache 15 0 358m 36m 5228 S 0.7 0.2 2:08.32 httpd 3571 root 16 0 13400 1792 848 S 0.3 0.0 2:37.89 top 4419 mysql 15 0 668m 175m 7204 S 0.3 1.1 3:32.25 mysqld 28181 root 15 0 90460 3624 2680 S 0.3 0.0 0:17.60 sshd 29091 apache 15 0 390m 69m 5196 S 0.3 0.4 2:29.99 httpd 32476 root 15 0 12900 1320 848 R 0.3 0.0 0:06.46 top 1 root 15 0 10372 680 572 S 0.0 0.0 0:02.01 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.51 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.07 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.12 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.06 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.06 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:01.45 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.22 migration/5 18 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.15 migration/6 21 root 34 19 0 0 0 S 0.0 0.0 0:00.02 ksoftirqd/6 22 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/6 23 root RT -5 0 0 0 S 0.0 0.0 0:00.15 migration/7 24 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/7 25 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/7 26 root RT -5 0 0 0 S 0.0 0.0 0:00.19 migration/8 27 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/8 28 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/8 29 root RT -5 0 0 0 S 0.0 0.0 0:00.34 migration/9 30 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/9 31 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/9 32 root RT -5 0 0 0 S 0.0 0.0 0:00.16 migration/10 33 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/10 34 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/10 35 root RT -5 0 0 0 S 0.0 0.0 0:00.12 migration/11 36 root 34 19 0 0 0 S 0.0 0.0 0:00.05 ksoftirqd/11 37 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/11 38 root RT -5 0 0 0 S 0.0 0.0 0:00.35 migration/12

    Read the article

  • How to make awkward pivot of sql table in MS SQL Server 2005?

    - by Oliver
    I have to rotate a given table from an sql server but a normal pivot just doesn't work (as far as i tried). So has anybody an idea how to rotate the table into the desired format? Just to make the problem more complicated, the list of given labels can vary and it is possible that a new label name can come into at any given time. Given Data ID | Label | Numerator | Denominator | Ratio ---+-----------------+-------------+---------------+-------- 1 | LabelNameOne | 41 | 10 | 4,1 1 | LabelNameTwo | 0 | 0 | 0 1 | LabelNameThree | 21 | 10 | 2,1 1 | LabelNameFour | 15 | 10 | 1,5 2 | LabelNameOne | 19 | 19 | 1 2 | LabelNameTwo | 0 | 0 | 0 2 | LabelNameThree | 15 | 16 | 0,9375 2 | LabelNameFive | 19 | 19 | 1 2 | LabelNameSix | 17 | 17 | 1 3 | LabelNameOne | 12 | 12 | 1 3 | LabelNameTwo | 0 | 0 | 0 3 | LabelNameThree | 11 | 12 | 0,9167 3 | LabelNameFour | 12 | 12 | 1 3 | LabelNameSix | 0 | 1 | 0 Wanted result ID | ValueType | LabelNameOne | LabelNameTwo | LabelNameThree | LabelNameFour | LabelNameFive | LabelNameSix ---+-------------+--------------+--------------+----------------+---------------+---------------+-------------- 1 | Numerator | 41 | 0 | 21 | 15 | | 1 | Denominator | 10 | 0 | 10 | 10 | | 1 | Ratio | 4,1 | 0 | 2,1 | 1,5 | | 2 | Numerator | 19 | 0 | 15 | | 19 | 17 2 | Denominator | 19 | 0 | 16 | | 19 | 17 2 | Ratio | 1 | 0 | 0,9375 | | 1 | 1 3 | Numerator | 12 | 0 | 11 | 12 | | 0 3 | Denominator | 12 | 0 | 12 | 12 | | 1 3 | Ratio | 1 | 0 | 0,9167 | 1 | | 0

    Read the article

  • How to make awkward pivot of sql table in SQL Server 2005?

    - by Oliver
    I have to rotate a given table from an SQL Server but a normal pivot just doesn't work (as far as i tried). So has anybody an idea how to rotate the table into the desired format? Just to make the problem more complicated, the list of given labels can vary and it is possible that a new label name can come into at any given time. Given Data ID | Label | Numerator | Denominator | Ratio ---+-----------------+-------------+---------------+-------- 1 | LabelNameOne | 41 | 10 | 4,1 1 | LabelNameTwo | 0 | 0 | 0 1 | LabelNameThree | 21 | 10 | 2,1 1 | LabelNameFour | 15 | 10 | 1,5 2 | LabelNameOne | 19 | 19 | 1 2 | LabelNameTwo | 0 | 0 | 0 2 | LabelNameThree | 15 | 16 | 0,9375 2 | LabelNameFive | 19 | 19 | 1 2 | LabelNameSix | 17 | 17 | 1 3 | LabelNameOne | 12 | 12 | 1 3 | LabelNameTwo | 0 | 0 | 0 3 | LabelNameThree | 11 | 12 | 0,9167 3 | LabelNameFour | 12 | 12 | 1 3 | LabelNameSix | 0 | 1 | 0 Wanted result ID | ValueType | LabelNameOne | LabelNameTwo | LabelNameThree | LabelNameFour | LabelNameFive | LabelNameSix ---+-------------+--------------+--------------+----------------+---------------+---------------+-------------- 1 | Numerator | 41 | 0 | 21 | 15 | | 1 | Denominator | 10 | 0 | 10 | 10 | | 1 | Ratio | 4,1 | 0 | 2,1 | 1,5 | | 2 | Numerator | 19 | 0 | 15 | | 19 | 17 2 | Denominator | 19 | 0 | 16 | | 19 | 17 2 | Ratio | 1 | 0 | 0,9375 | | 1 | 1 3 | Numerator | 12 | 0 | 11 | 12 | | 0 3 | Denominator | 12 | 0 | 12 | 12 | | 1 3 | Ratio | 1 | 0 | 0,9167 | 1 | | 0

    Read the article

  • Multiple LIKE in SQL

    - by ninumedia
    I wanted to search through multiple rows and obtain the row that contains a particular item. The table in mySQL is setup so each id has a unique list (comma-delimited) of values per row. Ex: id | order 1 | 1,3,8,19,34,2,38 2 | 4,7,2,190,38 Now if I wanted to pull the row that contained just the number 19 how would I go about doing this? The possibilities I could figure in the list with a LIKE condition would be: 19, ,19 ,19, I tried the following and I cannot obtain any results, Thank you for your help! SELECT * FROM categories WHERE order LIKE '19,%' OR '%,19%' OR '%,19%' LIMIT 0 , 30

    Read the article

  • Why do the usable sizes differ

    - by Raigex
    Again, dont really know how to phrase the question so I will explain. I have a video recorder application. I open my camera with cameraRecorder = Camera.open(1); //(this is the front facing camera) And get the camera parameters and all supported preview sizes CameraParameters tmpParams = cameraRecorder.getParameters(); List<Camera.Size> tmpList = tmpParams.getSupportedPreviewSizes(); one of the preview sizes on the Galaxy Tab 10.1 running ICS (4.0.4) is 800x600 but when I try to set the Video size in my media Player mediaRecorder.setVideoSize(800,600); I get this error: 12-19 17:27:55.035: E/CameraSource(110): Video dimension (800x600) is unsupported 12-19 17:27:55.035: E/StagefrightRecorder(110): cameraSource do not init 12-19 17:27:55.035: E/StagefrightRecorder(110): setupCameraSource failed. (-19) 12-19 17:27:55.035: E/StagefrightRecorder(110): setupMediaSource is failed. (-19) 12-19 17:27:55.035: E/StagefrightRecorder(110): setupMPEG4Recording is failed. (-19) 12-19 17:27:55.035: E/MediaRecorder(30119): start failed: -19 Does anyone know why this discrepancy might exist (I know one of the supported record sizes is 1280x720 but that is too big for me).

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >