Search Results

Search found 1855 results on 75 pages for 'tango 123'.

Page 8/75 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• TCP stops sending weirdly.

  - by Utoah

  In case to find out the cause of TCP retransmits on my Linux (RHEL, kernel 2.6.18) servers connecting to the same switch. I had a client-server pair send "Hello" to each other every 200us and captured the packets with tcpdump on the client machine. The command I used to mimic client and server are: while [ 0 ]; do echo "Hello"; usleep 200; done | nc server 18510 while [ 0 ]; do echo "Hello"; usleep 200; done | nc -l 18510 When the server machine was busy serving some other requests, the client suffered from abrupt retransmits occasionally. But the output of tcpdump seemed irrational. 16:04:58.898970 IP server.18510 > client.34533: P 4531:4537(6) ack 3204 win 123 <nop,nop,timestamp 1923778643 3452833828> 16:04:58.901797 IP client.34533 > server.18510: P 3204:3210(6) ack 4537 win 33 <nop,nop,timestamp 3452833831 1923778643> 16:04:58.901855 IP server.18510 > client.34533: P 4537:4549(12) ack 3210 win 123 <nop,nop,timestamp 1923778646 3452833831> 16:04:58.903871 IP client.34533 > server.18510: P 3210:3216(6) ack 4549 win 33 <nop,nop,timestamp 3452833833 1923778646> 16:04:58.903950 IP server.18510 > client.34533: P 4549:4555(6) ack 3216 win 123 <nop,nop,timestamp 1923778648 3452833833> 16:04:58.905796 IP client.34533 > server.18510: P 3216:3222(6) ack 4555 win 33 <nop,nop,timestamp 3452833835 1923778648> 16:04:58.905860 IP server.18510 > client.34533: P 4555:4561(6) ack 3222 win 123 <nop,nop,timestamp 1923778650 3452833835> 16:04:58.908903 IP client.34533 > server.18510: P 3222:3228(6) ack 4561 win 33 <nop,nop,timestamp 3452833838 1923778650> 16:04:58.908966 IP server.18510 > client.34533: P 4561:4567(6) ack 3228 win 123 <nop,nop,timestamp 1923778653 3452833838> 16:04:58.911855 IP client.34533 > server.18510: P 3228:3234(6) ack 4567 win 33 <nop,nop,timestamp 3452833841 1923778653> 16:04:59.112573 IP client.34533 > server.18510: P 3228:3234(6) ack 4567 win 33 <nop,nop,timestamp 3452834042 1923778653> 16:04:59.112648 IP server.18510 > client.34533: P 4567:5161(594) ack 3234 win 123 <nop,nop,timestamp 1923778857 3452834042> 16:04:59.112659 IP client.34533 > server.18510: P 3234:3672(438) ack 5161 win 35 <nop,nop,timestamp 3452834042 1923778857> 16:04:59.114427 IP server.18510 > client.34533: P 5161:5167(6) ack 3672 win 126 <nop,nop,timestamp 1923778858 3452834042> 16:04:59.114439 IP client.34533 > server.18510: P 3672:3678(6) ack 5167 win 35 <nop,nop,timestamp 3452834044 1923778858> 16:04:59.116435 IP server.18510 > client.34533: P 5167:5173(6) ack 3678 win 126 <nop,nop,timestamp 1923778860 3452834044> 16:04:59.116444 IP client.34533 > server.18510: P 3678:3684(6) ack 5173 win 35 <nop,nop,timestamp 3452834046 1923778860> Packet 3228:3234(6) from client was retransmitted due to ack timeout. What I could not understand was that the client machine did not send out any packets after the first 3228:3234(6) packets was sent. The server machine had advertised a window (scaled) large enough. The data transfer up to the retransmit was fine which meant no slow start should be in action. What can cause the client machine to stop sending until the packet timed out? BTW, I am unable to run tcpdump on the server machine.

  Read the article

• Issues connection to Ubuntu via PuTTy

  - by user1787262

  I'm not sure this is the appropriate stack exchange site to post this question on. If not, please flag this for migration. I am trying to use PuTTy ssh into my ubuntu machine which is wirelessly connected to the same network. I originally ran ifconfig to get my ubuntu machines private network IP address. I then verified that ssh was running, I even ssh'd into my school network and then into the ubuntu machine itself. No problems yet. On my windows 8 machine I ran ipconfig to get my private network IPv4 address. I then pinged my ubunty machines IP and 100% of packets were received. I figured, "OK we are ready to use PuTTy to connect to my Ubuntu Machine". Keep in mind this was my first time using PuTTy. I tried entering the IP of my ubuntu machine in the PuTTy Config GUI but I got a connection timeout. At this moment I don't really know what's going on, SSH is running on port 22 of my Ubuntu machine and I can ping the machine why is it not connecting? (I tried [username]@ip too). So I went on my Ubuntu machine and ran nmap -sP 192.168.0.1/24 and found that my windows machines IP did not show up, the host is down. I'm at a lost in something I am not very familiar with. Would anyone be able to help me or direct me to some resources that would trouble shoot my problem? Thank you EDIT (ADDITION): tyler@tyler-Aspire-5250:~$ nmap -v 192.168.0.123 Starting Nmap 6.40 ( http://nmap.org ) at 2014-06-06 01:56 MDT Initiating Ping Scan at 01:56 Scanning 192.168.0.123 [2 ports] Completed Ping Scan at 01:56, 3.00s elapsed (1 total hosts) Nmap scan report for 192.168.0.123 [host down] Read data files from: /usr/bin/../share/nmap Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 3.14 seconds tyler@tyler-Aspire-5250:~$ nmap -Pn 192.168.0.123 Starting Nmap 6.40 ( http://nmap.org ) at 2014-06-06 01:56 MDT Nmap scan report for 192.168.0.123 Host is up (0.022s latency). Not shown: 998 filtered ports PORT STATE SERVICE 2869/tcp open icslap 5357/tcp open wsdapi Nmap done: 1 IP address (1 host up) scanned in 72.51 seconds

  Read the article

• Unable to sync time using `ntpdate`, error: "no server suitable for synchronization found"

  - by William Ting

  My ntp.conf file: user@pc[0][07:37:40]:/etc$ cat /etc/ntp.conf idriftfile /var/lib/ntp/ntp.drift server 0.pool.ntp.org server 1.pool.ntp.org server 2.pool.ntp.org server pool.ntp.org Command output: user@pc[0][07:37:24]:/etc$ sudo ntpdate -dv pool.ntp.org 18 Jun 07:37:35 ntpdate[10737]: ntpdate [email protected] Tue Apr 19 07:15:05 UTC 2011 (1) Looking for host pool.ntp.org and service ntp host found : conquest.kjsl.com transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) 198.137.202.16: Server dropped: no data 216.45.57.38: Server dropped: no data 64.6.144.6: Server dropped: no data server 198.137.202.16, port 123 stratum 0, precision 0, leap 00, trust 000 refid [198.137.202.16], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmit timestamp: d1a71a93.1f16c1e3 Sat, Jun 18 2011 7:37:39.121 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 server 216.45.57.38, port 123 stratum 0, precision 0, leap 00, trust 000 refid [216.45.57.38], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmit timestamp: d1a71a93.524a05dd Sat, Jun 18 2011 7:37:39.321 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 server 64.6.144.6, port 123 stratum 0, precision 0, leap 00, trust 000 refid [64.6.144.6], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmit timestamp: d1a71a93.524a05dd Sat, Jun 18 2011 7:37:39.321 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 server 64.6.144.6, port 123 stratum 0, precision 0, leap 00, trust 000 refid [64.6.144.6], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmit timestamp: d1a71a93.857c6fbd Sat, Jun 18 2011 7:37:39.521 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 18 Jun 07:37:40 ntpdate[10737]: no server suitable for synchronization found

  Read the article

• Use same dns server for all (future) connections

  - by kleofas

  I'm wondering if it is possible to specify, that all connections (even future, like when using wifi at some other place (=different SSID)) will be using pre-defined DNS server When I have some (concrete) connections, I could go to IPv4 settings, and specify DNS server there (however, in case of new connection I would have to do it (and not forget it)) This may be particularly useful for some safe/filtering dns (such as opendns's 208.67.222.123 & 208.67.220.123)

  Read the article

• Canonical tags for separate mobile URLs

  - by DnBase

  I have a Drupal website serving mobile pages from different urls (starting from /mobile). According to Google recommendations I should use the canonical tag to map desktop and mobile pages. Right now I did this in case I serve the same node (e.g: node/123 and mobile/node/123) but should I do this for other pages as well that are equivalent but share a different content? For example do I need to map the desktop and mobile homepages even if they don't have the same content at all?

  Read the article

• WS2008 NTP - Using time.windows.com,0x9 - Time always skewed forwards

  - by David

  I have a domain controller configured to use time.windows.com (with 0x09 flags set). I've noticed that frequently the systems' clock is fast - it varies from 10 minutes to even 45 minutes. I always have to keep resetting the system date/time back to what it should be. When I run "w32tm /query /source" it tells me it's using time.windows.com, and obviously I trust Microsoft not to serve incorrect times, but why is my server's clock fast? EDIT: There are a few Time-Service events in the System log: Event ID: 142 Message: The time service has stopped advertising as a time source because the local clock is not synchronized. Event ID: 139 Message: The time service has started advertising as a time source. These two messages appear in pairs every hour or so. Event 142 appears 14 to 16 minutes after 139 appears. Going back a few months, these events appear: Event ID: 35 Message: The time service is now synchronizing the system time with the time source time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123-65.55.21.21:123). Event ID: 37 Message: The time provider NtpClient is currently receiving valid time data from time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123-65.55.21.21:123). Event ID: 47 Message: Time Provider NtpClient: No valid response has been received from manually configured peer time.windows.com,0x9 after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a new peer with this DNS name. The error was: The time sample was rejected because: The peer is not synchronized, or it has been too long since the peer's last synchronization. These three events only appear once in the log, back in October.

  Read the article

• MYSQL - Multiple set values in one update statement [migrated]

  - by Maurzank

  MYSQL - MULTIPLE SET VALUES IN ONE UPDATE STATEMENT USING 2 TABLES AS REFERENCE AND STORING VALUES IN ONE OF THOSE TABLES WITH A SPECIFIC LOGIC. Hello people, A problem came up by making an UPDATE. The example issue is as follows: CURRENUSRTABLE +------------+-------+ | ID | STATE | +------------+-------+ | 123 | 3 | | 456 | 3 | | 789 | 3 | +------------+-------+ HISTORYTABLE +------------+------------+-----+ | ID | TRDATE | ACT | +------------+------------+-----+ | 123 | 2013-11-01 | 5 | | 456 | 2013-11-01 | 5 | | 789 | 2013-11-01 | 5 | | 123 | 2013-11-02 | 4 | | 456 | 2013-11-02 | 4 | | 789 | 2013-11-02 | 4 | | 123 | 2013-11-03 | 3 | | 456 | 2013-11-03 | 3 | | 789 | 2013-11-03 | 3 | +------------+------------+-----+ I'm using these variables: @BA=3, @DE=5, @BL=4, What I'm trying to do is an update on CURRENUSRTABLE.STATE using HISTORYTABLE.ACT with the following logic: STATE value will be updated as ACT value, except when STATE value is 4 and ACT is 3, then STATE will be 5 I made this statement: UPDATE CURRENUSRTABLE RIGHT OUTER JOIN HISTORYTABLE ON HISTORYTABLE.ID=CURRENUSRTABLE.ID SET CURRENUSRTABLE.STATE= ( SELECT CASE HISTORYTABLE.ACT WHEN @DE THEN @DE WHEN @BL THEN @BL WHEN @BA THEN CASE CURRENUSRTABLE.STATE WHEN @BL THEN @DE ELSE @BA END END ORDER BY HISTORYTABLE.TRDATE,FIELD(HISTORYTABLE.ACT,@DE,@BL,@BA) ) WHERE HISTORYTABLE.TRDATE BETWEEN '2013-11-01' AND '2013-11-01' I'm intentionally using "RIGHT OUTER JOIN" and "HISTORYTABLE.TRDATE BETWEEN" because I'd like to change the values in CURRENUSRTABLE using a timeframe of more than one day. If I execute this statement many times using only one day (i.e. "BETWEEN '2013-11-01' AND '2013-11-01'" and then "BETWEEN '2013-11-02' AND '2013-11-02'"... etc ) it works perfectly, but if it is executed using the dates "BETWEEN '2013-11-01' AND '2013-11-03'" the results on CURRENUSRTABLE.STATE are 3, which is wrong, it should be 5. I think the problem relies on "CASE CURRENUSRTABLE.STATE" when uses "HISTORYTABLE.TRDATE BETWEEN '2013-11-01' AND '2013-11-03'", because it reads the STATE 9 times which has not been commited yet until the statement ends. Query OK, 9 rows affected (0.00 sec) Rows matched: 9 Changed: 9 Warnings: 0 Maybe the solution is very simple, but unfortunately I've not much practice on MySQL since I've worked with it less than 2 months :) Is there any suggestions to solve this issue? PD: MySQL version is 4.1.22, I know is very old an EOL, unfortunately I have to make these statements on this version. Thanks!

  Read the article

• grepping a substring from a grep result

  - by allentown

  Given a log file, I will usually do something like this: grep 'marker-1234' filter_log What is the difference in using '' or "" or nothing in the pattern? The above grep command will yield many thousands of lines; what I desire. Within those lines, There is usually one chunk of data I am after. Sometimes, I use awk to print out the fields I am after. In this case, the log format changes, I can't rely on position exclusively, not to mention, the actual logged data can push position forward. To make this understandable, lets say the log line contained an IP address, and that was all I was after, so I can later pipe it to sort and unique and get some tally counts. An example may be: 2010-04-08 some logged data, indetermineate chars - [marker-1234] (123.123.123.123) from: [email protected] to [email protected] [stat-xyz9876] The first grep command will give me many thousands of lines like the above, from there, I want to pipe it to something, probably sed, which can pull out a pattern within, and print only the pattern. For this example, using an the IP address would suffice. I tried. Is sed not able to understand [0-9]{1,3}. as a pattern? I had to [0-9][0-9][0-9]. which yielded strange results until the entire pattern created. This is not specific to an IP address, the pattern will change, but I can use that as a learning template. Thank you all.

  Read the article

• (Zywall USG 300) NAT bypassed when accessing in-house-server From LAN Via domain name

  - by mschr

  My situations is like this; i host a number of websites from within our joint network solution. On the network is basically 3 categories: the known public, registered via mac, given static dhcp lease the anonymous lan connections, given lease from specific dhcp range switches, unix hosts firewall Now, consider following hosts which are of interest 111.111.111.111 (Zywall USG 300 WAN) 192.168.1.1 (ZyWall USG 300 LAN) load balances and bw monitors plus handles NAT 192.168.1.2 (Linux www) serves mydomain1.tld and mydomain2.tld 192.168.123.123 (Random LAN client) accesses mydomain1.tld from LAN 23.234.12.253 (Random External client) accesses mydomain1.tld via WAN DNS A records are setup so that both mydomain1.tld and mydomain2.tld points to 111.111.111.111 - and the Linux www serves the http parts with VirtualHost configurations, setting up the document roots pr ServerName, this is not so interesting though.. NAT rule translates 111.111.111.111:80 to 192.168.1.2:80 (1:1 NAT) Our problem follows; When accessing http://mydomain1.tld from outside (23.234.12.253 example host) the joint network - everything is fine, zywall receives requests via port 80 and maps it to the linux host' httpd. However - once trying to go through the NAT from LAN side (in-house, 192.168.123.123 example host) then one gets filtered in the Zywall port 80 firewall. I know this only because port 443 is open for administration interface and https://mydomain1.tld prompts for zywall login. So my conclusion is, that the LAN that accesses 111.111.111.111 in fact are routed to 192.168.1.1 whilst bypassing the NAT table. I need to know how to setup NAT / Policy Route, so that LAN WAN LAN will function with proper network translations instead of doing the 'quick nameserver lookup' or whatever this might be.

  Read the article

• Sending Mail from Web App to Google Apps won't work - internal routing? VPS

  - by Charlino

  I've got a web application, www.mysuperwebapp.com, which sends out emails for various reasons - the contact us page is a good example. I am using google apps on the domain and I've setup a google apps group, Support ([email protected]), which I want the emails from the contact us page to go to. But the emails don't seem to be sending... I thought it could be that the groups security is a little tighter than normal email, so I change the contact us email to go to [email protected] - but they still didn't appear. So I'm guessing that it has something to do with internal routing and the messages aren't leaving the server/network at all. Eg Sending an email from the mysuperwebapp.com computer to a mysuperwebapp.com email address. I put an entry into the hosts file for 123.123.123.123 mysuperwebapp.com but that doesn't seem to have helped. Also, there doesn't seem to be anything of interest in the event log. What do I need to do? Or what do I need to get my VPS hoster to do? TIA, Charles Ps. The VPS is a Windows 2008 box with IIS7 and the default SMTP (IIS6?) server. The web app is ASP.NET MVC - not that that should matter.

  Read the article

• Redirection of outbound UDP port NTP.

  - by pboin

  For my residential service, I changed ISPs to Zoom/Armstrong. Just after that, my NTP daemons stopped working. I dug deep and diagnosed the problem: Unprivileged ports are getting out. When i run 'ntpdate' for example, I go out on a high, unprivleged port, and get a response on UDP 123. That's fine. The 'ntpd' daemon though, expects to go out on 123 and get its reply there as well. This must be a common problem, because it's directly addressed in the NTP troubleshooting guide. Just to see what would happen, I wrote a detailed email to the general support address at Armstrong. They replied almost immediately with a complete technical answer! They have everything <1024 blocked, except for a few ports to support outbound VPN. So, the question: Can I use IPtables to essentially re-write my outbound UDP 123 up to 2123 or something like that? If I do, does there need to be a corresponding 2123-123 rule to translate the reply? This seems like NAT, but with ports, not addresses. True, I could run ntpdate from cron, but that loses all of the adjustment smarts of NTP.

  Read the article

• Redirection of outbound UDP port.

  - by pboin

  For my residential service, I changed ISPs to Zoom/Armstrong. Just after that, my NTP daemons stopped working. I dug deep and diagnosed the problem: Unprivileged ports are getting out. When i run 'ntpdate' for example, I go out on a high, unprivleged port, and get a response on UDP 123. That's fine. The 'ntpd' daemon though, expects to go out on 123 and get its reply there as well. This must be a common problem, because it's directly addressed in the NTP troubleshooting guide. Just to see what would happen, I wrote a detailed email to the general support address at Armstrong. They replied almost immediately with a complete technical answer! They have everything <1024 blocked, except for a few ports to support outbound VPN. So, the question: Can I use IPtables to essentially re-write my outbound UDP 123 up to 2123 or something like that? If I do, does there need to be a corresponding 2123-123 rule to translate the reply? This seems like NAT, but with ports, not addresses. I tried, but can't seem to get iptables to do what I want. I'm not sure if it's my lack of skill, or if I'm trying the wrong solution. True, I could run ntpdate from cron, but that loses all of the adjustment smarts of NTP.

  Read the article

• Strange Domain name under the same IP Address

  - by Mike Chip

  There's something really weird happening in my server. But first things first: I wanted to have my website and chose the domain name "myowndomain.com", Now on my domain registrar I point "myowndomain.com" to the address of my recently setup VPS, let's say 50.50.50.50 So I installed everything I needed to run my website, and I started to notice strange queries coming from different IP Addresses. Like these [client 123.123.123.123] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php [client 456.456.456.456] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php or like this (Really a long line, I cut some things) GET /?s=vod-show-id-22-area-%E5%85%B6%E4%BB%96-language-%E9%9F%A9%E8%AF%AD.html HTTP/1.1" 301 295 "http://v.strangedomain.com/?s=vod-s ...[cut]... spider" That above is happening the most. The 'strangedomain.com' returns the same IP address of my VPS which my website is hosted on. The whois of such domain shows it's registered to a chinese. But the street name didn't look so right (like a huge single word), so I think all of that info might be fake, but still might be a chinese. I also noticed that all 'clients' trying to access the 'strangedomain.com' is coming from china. If I type in the browser 'strangedomain.com', I see my website. I'm worried, because my website is actually an e-commerce. I don't know if 'strangedomain.com' WAS a website on 50.50.50.50 in the not so far past, or if it's something else.

  Read the article

• String Format for DateTime in C#

  - by SAMIR BHOGAYTA

  String Format for DateTime [C#] This example shows how to format DateTime using String.Format method. All formatting can be done also using DateTime.ToString method. Custom DateTime Formatting There are following custom format specifiers y (year), M (month), d (day), h (hour 12), H (hour 24), m (minute), s (second), f (second fraction), F (second fraction, trailing zeroes are trimmed), t (P.M or A.M) and z (time zone). Following examples demonstrate how are the format specifiers rewritten to the output. [C#] // create date time 2008-03-09 16:05:07.123 DateTime dt = new DateTime(2008, 3, 9, 16, 5, 7, 123); String.Format("{0:y yy yyy yyyy}", dt); // "8 08 008 2008" year String.Format("{0:M MM MMM MMMM}", dt); // "3 03 Mar March" month String.Format("{0:d dd ddd dddd}", dt); // "9 09 Sun Sunday" day String.Format("{0:h hh H HH}", dt); // "4 04 16 16" hour 12/24 String.Format("{0:m mm}", dt); // "5 05" minute String.Format("{0:s ss}", dt); // "7 07" second String.Format("{0:f ff fff ffff}", dt); // "1 12 123 1230" sec.fraction String.Format("{0:F FF FFF FFFF}", dt); // "1 12 123 123" without zeroes String.Format("{0:t tt}", dt); // "P PM" A.M. or P.M. String.Format("{0:z zz zzz}", dt); // "-6 -06 -06:00" time zone You can use also date separator / (slash) and time sepatator : (colon). These characters will be rewritten to characters defined in the current DateTimeForma­tInfo.DateSepa­rator and DateTimeForma­tInfo.TimeSepa­rator. [C#] // date separator in german culture is "." (so "/" changes to ".") String.Format("{0:d/M/yyyy HH:mm:ss}", dt); // "9/3/2008 16:05:07" - english (en-US) String.Format("{0:d/M/yyyy HH:mm:ss}", dt); // "9.3.2008 16:05:07" - german (de-DE) Here are some examples of custom date and time formatting: [C#] // month/day numbers without/with leading zeroes String.Format("{0:M/d/yyyy}", dt); // "3/9/2008" String.Format("{0:MM/dd/yyyy}", dt); // "03/09/2008" // day/month names String.Format("{0:ddd, MMM d, yyyy}", dt); // "Sun, Mar 9, 2008" String.Format("{0:dddd, MMMM d, yyyy}", dt); // "Sunday, March 9, 2008" // two/four digit year String.Format("{0:MM/dd/yy}", dt); // "03/09/08" String.Format("{0:MM/dd/yyyy}", dt); // "03/09/2008" Standard DateTime Formatting In DateTimeForma­tInfo there are defined standard patterns for the current culture. For example property ShortTimePattern is string that contains value h:mm tt for en-US culture and value HH:mm for de-DE culture. Following table shows patterns defined in DateTimeForma­tInfo and their values for en-US culture. First column contains format specifiers for the String.Format method. Specifier DateTimeFormatInfo property Pattern value (for en-US culture) t ShortTimePattern h:mm tt d ShortDatePattern M/d/yyyy T LongTimePattern h:mm:ss tt D LongDatePattern dddd, MMMM dd, yyyy f (combination of D and t) dddd, MMMM dd, yyyy h:mm tt F FullDateTimePattern dddd, MMMM dd, yyyy h:mm:ss tt g (combination of d and t) M/d/yyyy h:mm tt G (combination of d and T) M/d/yyyy h:mm:ss tt m, M MonthDayPattern MMMM dd y, Y YearMonthPattern MMMM, yyyy r, R RFC1123Pattern ddd, dd MMM yyyy HH':'mm':'ss 'GMT' (*) s SortableDateTi­mePattern yyyy'-'MM'-'dd'T'HH':'mm':'ss (*) u UniversalSorta­bleDateTimePat­tern yyyy'-'MM'-'dd HH':'mm':'ss'Z' (*) (*) = culture independent Following examples show usage of standard format specifiers in String.Format method and the resulting output. [C#] String.Format("{0:t}", dt); // "4:05 PM" ShortTime String.Format("{0:d}", dt); // "3/9/2008" ShortDate String.Format("{0:T}", dt); // "4:05:07 PM" LongTime String.Format("{0:D}", dt); // "Sunday, March 09, 2008" LongDate String.Format("{0:f}", dt); // "Sunday, March 09, 2008 4:05 PM" LongDate+ShortTime String.Format("{0:F}", dt); // "Sunday, March 09, 2008 4:05:07 PM" FullDateTime String.Format("{0:g}", dt); // "3/9/2008 4:05 PM" ShortDate+ShortTime String.Format("{0:G}", dt); // "3/9/2008 4:05:07 PM" ShortDate+LongTime String.Format("{0:m}", dt); // "March 09" MonthDay String.Format("{0:y}", dt); // "March, 2008" YearMonth String.Format("{0:r}", dt); // "Sun, 09 Mar 2008 16:05:07 GMT" RFC1123 String.Format("{0:s}", dt); // "2008-03-09T16:05:07" SortableDateTime String.Format("{0:u}", dt); // "2008-03-09 16:05:07Z" UniversalSortableDateTime

  Read the article

• How can I split Excel data from one row into multiple rows

  - by Lenny

  Good afternoon, Is there a way to split data from one row and store to separate rows? I have a large file that contains scheduling information and I'm trying to develop a list that comprises each combination of course, day, term and period per line. For example I have a file similiar to this: Crs:Sn Title Tchr TchrName Room Days Terms Periods 7014:01 English I 678 JUNG 300 M,T,W,R,F 3,4 2,3 1034:02 English II 123 MOORE 352 M,T,W,R,F 3 4 7144:02 Algebra 238 VYSOTSKY 352 M,T,W,R,F 3,4 3,4 0180:06 Pub Speaking 23 ROSEN 228 M,T,W,R,F 3,4 5 7200:03 PE I 244 HARILAOU GYM 4 M,T,W,R,F 1,2,3 3 2101:01 Physics/Lab 441 JONES 348 M,T,W,R,F 1,2,3,4 2,3 Should extract to this in an excel file: Crs:Sn Title Tchr# Tchr Room Days Terms Period 7014:01 English I 678 JUNG 300 M 3 2 7014:01 English I 678 JUNG 300 T 3 2 7014:01 English I 678 JUNG 300 W 3 2 7014:01 English I 678 JUNG 300 R 3 2 7014:01 English I 678 JUNG 300 F 3 2 7014:01 English I 678 JUNG 300 M 4 2 7014:01 English I 678 JUNG 300 T 4 2 7014:01 English I 678 JUNG 300 W 4 2 7014:01 English I 678 JUNG 300 R 4 2 7014:01 English I 678 JUNG 300 F 4 2 7014:01 English I 678 JUNG 300 M 3 3 7014:01 English I 678 JUNG 300 T 3 3 7014:01 English I 678 JUNG 300 W 3 3 7014:01 English I 678 JUNG 300 R 3 3 7014:01 English I 678 JUNG 300 F 3 3 7014:01 English I 678 JUNG 300 M 4 3 7014:01 English I 678 JUNG 300 T 4 3 7014:01 English I 678 JUNG 300 W 4 3 7014:01 English I 678 JUNG 300 R 4 3 7014:01 English I 678 JUNG 300 F 4 3 1034:02 English II 123 MOORE 352 M 3 4 1034:02 English II 123 MOORE 352 T 3 4 1034:02 English II 123 MOORE 352 W 3 4 1034:02 English II 123 MOORE 352 R 3 4 1034:02 English II 123 MOORE 352 F 3 4 7144:02 Algebra 238 VYSOTSKY 352 M 3 3 7144:02 Algebra 238 VYSOTSKY 352 T 3 3 7144:02 Algebra 238 VYSOTSKY 352 W 3 3 7144:02 Algebra 238 VYSOTSKY 352 R 3 3 7144:02 Algebra 238 VYSOTSKY 352 F 3 3 7144:02 Algebra 238 VYSOTSKY 352 M 4 3 7144:02 Algebra 238 VYSOTSKY 352 T 4 3 7144:02 Algebra 238 VYSOTSKY 352 W 4 3 7144:02 Algebra 238 VYSOTSKY 352 R 4 3 7144:02 Algebra 238 VYSOTSKY 352 F 4 3 7144:02 Algebra 238 VYSOTSKY 352 M 3 4 7144:02 Algebra 238 VYSOTSKY 352 T 3 4 7144:02 Algebra 238 VYSOTSKY 352 W 3 4 7144:02 Algebra 238 VYSOTSKY 352 R 3 4 7144:02 Algebra 238 VYSOTSKY 352 F 3 4 7144:02 Algebra 238 VYSOTSKY 352 M 4 4 7144:02 Algebra 238 VYSOTSKY 352 T 4 4 7144:02 Algebra 238 VYSOTSKY 352 W 4 4 7144:02 Algebra 238 VYSOTSKY 352 R 4 4 7144:02 Algebra 238 VYSOTSKY 352 F 4 4 0180:06 Pub Speaking 23 ROSEN 228 M 3 5 0180:06 Pub Speaking 23 ROSEN 228 T 3 5 0180:06 Pub Speaking 23 ROSEN 228 W 3 5 0180:06 Pub Speaking 23 ROSEN 228 R 3 5 0180:06 Pub Speaking 23 ROSEN 228 F 3 5 0180:06 Pub Speaking 23 ROSEN 228 M 4 5 0180:06 Pub Speaking 23 ROSEN 228 T 4 5 0180:06 Pub Speaking 23 ROSEN 228 W 4 5 0180:06 Pub Speaking 23 ROSEN 228 R 4 5 0180:06 Pub Speaking 23 ROSEN 228 F 4 5 7200:03 PE I 244 HARILAOU GYM 4 M 1 3 7200:03 PE I 244 HARILAOU GYM 4 M 2 3 7200:03 PE I 244 HARILAOU GYM 4 M 3 3 7200:03 PE I 244 HARILAOU GYM 4 T 1 3 7200:03 PE I 244 HARILAOU GYM 4 T 2 3 7200:03 PE I 244 HARILAOU GYM 4 T 3 3 7200:03 PE I 244 HARILAOU GYM 4 W 1 3 7200:03 PE I 244 HARILAOU GYM 4 W 2 3 7200:03 PE I 244 HARILAOU GYM 4 W 3 3 7200:03 PE I 244 HARILAOU GYM 4 R 1 3 7200:03 PE I 244 HARILAOU GYM 4 R 2 3 7200:03 PE I 244 HARILAOU GYM 4 R 3 3 7200:03 PE I 244 HARILAOU GYM 4 F 1 3 7200:03 PE I 244 HARILAOU GYM 4 F 2 3 7200:03 PE I 244 HARILAOU GYM 4 F 3 3 2101:01 Physics/Lab 441 JONES 348 M 1 2 2101:01 Physics/Lab 441 JONES 348 M 2 2 2101:01 Physics/Lab 441 JONES 348 M 3 2 2101:01 Physics/Lab 441 JONES 348 M 4 2 2101:01 Physics/Lab 441 JONES 348 T 1 2 2101:01 Physics/Lab 441 JONES 348 T 2 2 2101:01 Physics/Lab 441 JONES 348 T 3 2 2101:01 Physics/Lab 441 JONES 348 T 4 2 2101:01 Physics/Lab 441 JONES 348 W 1 2 2101:01 Physics/Lab 441 JONES 348 W 2 2 2101:01 Physics/Lab 441 JONES 348 W 3 2 2101:01 Physics/Lab 441 JONES 348 W 4 2 2101:01 Physics/Lab 441 JONES 348 R 1 2 2101:01 Physics/Lab 441 JONES 348 R 2 2 2101:01 Physics/Lab 441 JONES 348 R 3 2 2101:01 Physics/Lab 441 JONES 348 R 4 2 2101:01 Physics/Lab 441 JONES 348 F 1 2 2101:01 Physics/Lab 441 JONES 348 F 2 2 2101:01 Physics/Lab 441 JONES 348 F 3 2 2101:01 Physics/Lab 441 JONES 348 F 4 2 2101:01 Physics/Lab 441 JONES 348 M 1 3 2101:01 Physics/Lab 441 JONES 348 M 2 3 2101:01 Physics/Lab 441 JONES 348 M 3 3 2101:01 Physics/Lab 441 JONES 348 M 4 3 2101:01 Physics/Lab 441 JONES 348 T 1 3 2101:01 Physics/Lab 441 JONES 348 T 2 3 2101:01 Physics/Lab 441 JONES 348 T 3 3 2101:01 Physics/Lab 441 JONES 348 T 4 3 2101:01 Physics/Lab 441 JONES 348 W 1 3 2101:01 Physics/Lab 441 JONES 348 W 2 3 2101:01 Physics/Lab 441 JONES 348 W 3 3 2101:01 Physics/Lab 441 JONES 348 W 4 3 2101:01 Physics/Lab 441 JONES 348 R 1 3 2101:01 Physics/Lab 441 JONES 348 R 2 3 2101:01 Physics/Lab 441 JONES 348 R 3 3 2101:01 Physics/Lab 441 JONES 348 R 4 3 2101:01 Physics/Lab 441 JONES 348 F 1 3 2101:01 Physics/Lab 441 JONES 348 F 2 3 2101:01 Physics/Lab 441 JONES 348 F 3 3 2101:01 Physics/Lab 441 JONES 348 F 4 3 I'm trying to avoid going line by line separating the data. I'm not well versed on the VBA functionality of Excel, but would like to get started using it. Any help would be greatly appreciated.

  Read the article

• port forwarding on windows server 2008 to Hyper-v machines

  - by This is it

  I have a host machine (win server 2008 R2) with several Hyper-V virtual machines. I want to be able to redirect certain ports of host to virtual machines. There is virtual network connection between host and virtual machines (192.168.10.xxx). Host is also attached to external network (10.10.10.123). Virtual machines have several other networks between them. E.g., I want to be able to redirect traffic from 10.10.10.123 12345 to 192.168.10.321 54321 I tried RRAS in windows server but for it to work Default gateway to 10.10.10.123 has to be set in virtual machines. Virtual machines can not be on external network.

  Read the article

• Draytek Vigor 2820 static IP's

  - by dannymcc

  I have a Draytek Vigor 2820 router which is connected to our ADSL provider (British Telecom, BT). We currently have one static IP address which is accessible from anywhere outside of our network and points at a simple web server on port 80. We have just been given 5 more static IP addresses which I would like to point at five servers that have static IP's. As an example: Current static IP - 80.123.123.123 New Static IP's - 100.100.100.100-105 Server IP's - 192.168.1.129-133 I have confused myself completely between NAT addresses, static routes and WAN IP aliases. If anyone can give me a clear idea of what I need to do it would be greatly appreciated.

  Read the article

• Slower than expected 802.11n wireless network speeds

  - by Ian

  I have two ASUS laptops running Windows 7 connected wirelessly via 802.11n at 150 Mbit, as reported by Task Manager. The router is Netgear WNDR3700. When testing the wireless connection speed using iperf, I'm not getting nearly 150 Mbit: C:\>iperf -c 10.0.0.123 -t 30 ------------------------------------------------------------ Client connecting to 10.0.0.123, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 10.0.0.116 port 53819 connected with 10.0.0.123 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-30.0 sec 41.2 MBytes 11.5 Mbits/sec That's a typical result. Running parallel client threads does not increase the overall total speed. Why would I only be getting 11.5 Mbit on a 150 Mbit connection?

  Read the article

• DNS resolution over DHCP

  - by Eric

  I have a m0n0wall router a VMWare workstation running ubuntu a windows 7 workstation running the VM The ubuntu hostname is "renraku" From the windows machine I can't resolve dns automatically for this host. For example, when I ping renraku Ping request could not find host renraku. Please check the name and try again. However nslookup seems to work nslookup renraku Server: m0n0wall.local Address: 192.168.123.254 Name: renraku Address: 192.168.123.248 I don't get how to have ping to work with hostnames. The main goal behind this is to have my web server to work with hostnames instead of ip addresses EDIT : ping 192.168.123.248 works

  Read the article

• Skipping hardlinks when using TSM Backup

  - by Lars Haugseth

  We need to backup a filesystem with lots of hardlinks. Since there are several hardlinks for each "true" file, we would like to skip all the hardlinks when backing up the filesystem to avoid n exact copies of each file. The backup is done using Tivoli Storage Manager Backup, and we've been unable to get it to treat hardlinks as anything other than separate files to be backed up alongside each other. In case it's relevant for possible solutions, I'd like to note that it's possible to tell a hardlink from a proper file by the filename: foobarbaz-123.ext # file foobarbaz-123-1.ext # hardlink foobarbaz-123-2.ext # hardlink barbazfoo-456.ext # file barbazfoo-456-1.ext # hardlink barbazfoo-456-2.ext # hardlink barbazfoo-456-3.ext # hardlink That is, all hardlinks have two hyphens in the filename, where as proper files have just the one. The server is running Ubuntu Linux, and the files are situated on a gfs volume on our SAN.

  Read the article

• environment variable issue in shell

  - by George2

  I am using Red Hat Linux Enterprise 5. I know the theory that -- using export to set environment variable, the environment variable will apply to current and child environment, but without using export to set environment variable, the environment variable will only apply to the current environment. My confusion is, what is the exact definition of "child environment" and "current environment"? For example, $ var1=123 $ echo "Hello [$var1]" the value of var1 (which is 123) is printed in shell, but I think echo is a command invoked by current shell, and it (the echo command) should be a child environment of current shell and the value of var1 should not (because not using export var1=123) impact echo. Any comments? Thanks in advance!

  Read the article

• What's required to enable communication between two IP ranges located behind one switch?

  - by Eric3

  Within our co-located networking closet, we have control over two ranges of 254 addresses, e.g. 64.123.45.0/24 and 65.234.56.0/24. The problem is, if a host has only one IP address, or a block of addresses in only one range, it can't contact any of the addresses in the other subnet. All of our hosts use our hosting provider's respective gateway, e.g. 64.123.45.1 or 65.234.56.1 A host on the 64.123.45.0/24 range can contact the 65.234.56.1 gateway and vice-versa Everything in our closet is connected to an HP ProCurve 2810 (a Layer 2-only switch), which connects through a Juniper NetScreen-25 firewall to the outside world What can I do to enable communication between the two ranges? Is there some settings I can change, or do I need better networking equipment?

  Read the article

• my domain.com is pointing to two different IP addresses

  - by user43726

  Initially my domain , mycompany.com points to this IP: - 123.456.789.101 (sample only) Then i got another VPS and then decided to move the mycompany.com into this new IP/Host: - 987-654-123.123 (sample only) I changed the necessary stuff like DNS, etc. from my domain management panel. But when i ping it : ping mycompany.com , sometimes it gives the first IP, sometimes the second one. Also when i visit the url from the browser, sometimes it loads, sometimes it doesn't. How can i solve this? Please help. Thanks

  Read the article

• Getting list of opened ssh connections by name

  - by lyrae

  I have a config file in my .ssh dir that looks like this Host somehostA HostName 123.45.67.89 User katsh So from my local machine, i can ssh into multiple machines by their name in the config file, like so ssh somehostA ssh somehostB ssh somehostC ... etc Is it possible to get a list of all machines i am connected to, by their name? I know I can do: lsof -i tcp -n | grep '\<ssh\>' and i'll get something like ssh 9871 katsh 3u IPv4 400199 0t0 TCP 987.654.2.2:47329->987.654.2.2:47329:ssh (ESTABLISHED) ssh 20554 katsh 3u IPv4 443965 0t0 TCP 123.456.7.8:41923->123.456.7.8:ssh (ESTABLISHED) But it does not list their names, just IP

  Read the article

• Replace special text with sed?

  - by user143822

  I'm using CMD on Windows Xp to replace special text with Sed. I'm using this command for replace special characters like $ or * : sed -i "s/\*/123/g;" 1.txt But how command must i use to replace this strings with ciao! in my text files? Is possible? \\ \\\ "" sed.exe -i "s/{\*)(//123/ sed -i "s/\\/123/g;" 1.txt the previous command does not work because i have \, " and other special strings that sed use to make regex.

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >