Search Results

Search found 261 results on 11 pages for 'timers'.

Page 8/11 | < Previous Page | 4 5 6 7 8 9 10 11  | Next Page >

• extreme slowness with a remote database in Drupal

  - by ceejayoz

  We're attempting to scale our Drupal installations up and have decided on some dedicated MySQL boxes. Unfortunately, we're running into extreme slowness when we attempt to use the remote DB - page load times go from ~200 milliseconds to 5-10 seconds. Latency between the servers is minimal - a tenth or two of a millisecond. PING 10.37.66.175 (10.37.66.175) 56(84) bytes of data. 64 bytes from 10.37.66.175: icmp_seq=1 ttl=64 time=0.145 ms 64 bytes from 10.37.66.175: icmp_seq=2 ttl=64 time=0.157 ms 64 bytes from 10.37.66.175: icmp_seq=3 ttl=64 time=0.157 ms 64 bytes from 10.37.66.175: icmp_seq=4 ttl=64 time=0.144 ms 64 bytes from 10.37.66.175: icmp_seq=5 ttl=64 time=0.121 ms 64 bytes from 10.37.66.175: icmp_seq=6 ttl=64 time=0.122 ms 64 bytes from 10.37.66.175: icmp_seq=7 ttl=64 time=0.163 ms 64 bytes from 10.37.66.175: icmp_seq=8 ttl=64 time=0.115 ms 64 bytes from 10.37.66.175: icmp_seq=9 ttl=64 time=0.484 ms 64 bytes from 10.37.66.175: icmp_seq=10 ttl=64 time=0.156 ms --- 10.37.66.175 ping statistics --- 10 packets transmitted, 10 received, 0% packet loss, time 8998ms rtt min/avg/max/mdev = 0.115/0.176/0.484/0.104 ms Drupal's devel.module timers show the database queries aren't running any slower on the remote DB - about 150 microseconds whether it's the local or the remote server. Profiling with XHProf shows PHP execution times that aren't out of whack, either. Number of queries doesn't seem to make a difference - we seem the same 5-10 second delay whether a page has 12 queries or 250. Any suggestions about where I should start troubleshooting here? I'm quite confused.

  Read the article

• Put one monitor of a dual monitor windows system into standby

  - by Psycogeek

  Standby not Disabled! When running 2 monitors on windows 7 or Windows XP, I would like to be able to put one of the monitors at a time into standby. The method can be manual. When running 2 monitors , the second monitor is not always needed, shutting off the monitors own power switch will turn off the monitor, that does work Ok. Problems with that are , the delay with the monitor logo at turn on, and the power switch is not very accessable, and the switch might not live forever turning it on and off so many times. Using disable methods like devcon, WIN-P and Display, causes all the windows to properly move to the other monitor. While that is what a person would want to happen so they can get hold of the windows, that is not what I want to happen, and some things on the other monitor have to be re-arranged after a re-enable. By putting it into standby mode, nothing changes other than the monitor going into standby. Disconnecting the DVI cable still can cause the system to (properly) shift all the windows over to the one monitor, just like any of the disable methods do. That makes a mess of the windows, and is so unacceptable, that I would prefer to leave the monitor on, wasting power and the hardware, when it could easily go into standby for some time. For both monitors I am using a "MonitorOff" program that puts both monitors into standby, but I can not find a utility that will put only ONE monitor into standby for the windows system. If someone comes along and suggests "ultramon" you must know for a fact that it will put One of either of the monitors into actual standby. And it does not really suit me to use ultramon, I tested it (it was nice) and I did not feel that it was a program I wanted. The 2 monitors are running off of an ATI 4890 card, they are both hooked up DVI-I, the OS is both Windows 7 (primary) and Windows XP. In addition it would also be interesting to have seperate standby activity timers, and follow mouse kind of standby changes, but any manuel method , shortcut, batch , tray, or gadget kind of operation would be a good start.

  Read the article

• Event Log "Wake Source" when system wakes from sleep

  - by Doltknuckle

  So I've been troubleshooting sleep timers for our systems and have run across an interesting issue. I need a way to report how long a system was awake after a number of different inputs. Now, I've discovered that the System Log tracks wake and sleep events and even tells you the times that everything happens at. The thing is doesn't tell you is what triggered the wake event. It does give you a numerical code however. Here are some examples of what I am finding. Index : 2901 EntryType : Information InstanceId : 1 Message : The system has resumed from sleep. Sleep Time: 2010-10-01T23:20:06.097488100Z Wake Time: 2010-10-03T17:41:12.796400500Z Wake Source: 0 Category : (0) CategoryNumber : 0 Source : Microsoft-Windows-Power-Troubleshooter -- Index : 2841 EntryType : Information InstanceId : 1 Message : The system has resumed from sleep. Sleep Time: 2010-10-01T19:19:37.239789600Z Wake Time: 2010-10-01T21:28:48.921200800Z Wake Source: 4HID Keyboard Device Category : (0) CategoryNumber : 0 Source : Microsoft-Windows-Power-Troubleshooter So here's my question: Does anyone know what the different numerical codes for the "Wake Source" mean? I think "0" is a magic packet and "4" is a USB device. Does anyone have any idea if there is any documentation out there on this for Windows 7? Thanks in advance

  Read the article

• Can I make my PC backup and then sleep on demand with WHS?

  - by Simon

  I really hate the way that WHS backs up at a particular time in the morning. First of all I don't EVER want my computer turning on when I am not there. EVER. I have a Core-i7 laptop which literally could burn the house down quite easily if it were to turn on in a bag. I also don't ever want my PC to sleep unless I tell it to. I don't have hibernation or sleep enabled and this is the only way that WHS will sleep after a backup is complete. I know that Windows 7 has the ability to disable waking up when on battery power but it doesn't seem to work on my laptop. These are the possibilities (with wake timers left as default): 'Wake this computer for backup' ON - it turns on in my bag if i forget to turn it off - and stays on when the backup is complete. 'Wake this computer for backup' OFF - it backs up in the morning, but I need to leave the machine on all night. I say 'Backup Now' and then it backs up immediately. I can turn it off when its done if I'm still awake, but then that backup appears as 'locked' in the console and not 'automatically managed'. What I'd really like to do is : Click 'Backup and Sleep' and then go to bed. It will backup immediately and then sleep the PC. This backup must be 'automatically managed' and not appear as a 'locked backup' in my console Show me a confirmation that everything was backed up successfully (or not) when I turn it on. Is there any way to achieve this?

  Read the article

• Why won't my computer go to sleep automatically?

  - by Django Reinhardt

  Windows 8 is set to sleep after 30 mins, and it used to work, but recently it's started refusing to sleep. (I can still manually ask it to go to sleep without any issue.) I was having issues a while ago, but it was with my network adapter. That's since been disabled, so it's definitely not that: I've checked to see what devices are able to wake up my machine, but it only appears to be my mouse: Which is odd, because I haven't recently changed my mouse, and more confusing still: The monitor does go to sleep just fine. If it was actually the mouse keeping my system awake, I'm pretty sure the monitor wouldn't go to sleep. I've checked my Wake Timers, and nothing: I've also checked my existing requests... UPDATE: I found something. What to do with it, I don't know... Note: Even when /requests says that there's "NONE" under every category, my machine still won't sleep(!). In short: How can I tell what's preventing my computer from Sleeping? UPDATE: Ok, so I now have a few more pieces of the puzzle. I came back to my computer and it was ASLEEP! Lawks! It seems that the only times it doesn't sleep is if VLC Player is open, even if a video isn't actually playing. UPDATE UPDATE: Ok, so it won't sleep sometimes when VLC Player ISN'T running, either. Bah!

  Read the article

• Is there a realiable way to troubleshoot wake up from sleep in Windows?

  - by Borek

  Is there a reliable way to troubleshoot laptop wakes? I've seen "heuristics" posted here and there but isn't there really a simple and deterministic way to tell what's causing a problem? Specifically, my laptop wakes up about every hour for about 2 minutes. Exported event log entries are here: http://www.mediafire.com/?abcqb00v5wyo6pj. I've tried: powercfg -devicequery wake_armed Empty result set. Scheduled tasks - the main ones are not scheduled to run every hour. When go through a long list of all possible tasks, there are some that are set to be triggered every hour (e.g., MS "RacTask" whatever it is). But when I go to power options, Advanced settings, Sleep, Allow wake timers it is set to "Disable". Also, the specific task is not set to wake the computer if necessary. Power options for my Ethernet card don't enable it to wake the computer - the cable is disconnected anyway. There are no other HW devices attached - no USB disks, no keyboards / mice etc. I am really clueless and quite unhappy that it's so hard to troubleshoot this situation.

  Read the article

• Task scheduled to wake laptop - only works when lid is open

  - by JD Pack

  I am running Windows 7 Starter on an Acer Aspire One laptop. I want my laptop to automatically run a task (backup the HDD to a network drive) once a week in the middle of the night. I scheduled the task in "Task Scheduler" and checked the box to wake the computer to run the task. I also changed the advanced power settings to allow wake timers. This was half of the solution. It now works flawlessly when the lid is open... the computer can wake itself up from either sleep or hibernate mode to perform the backup. When the lid is closed however, its sleeping beauty. Any ideas? I don't want to have to remember to open the lid once a week. It sort of defeats the purpose of an "automatic" backup. Update: I discovered that it can wake from sleep (or hybrid sleep), but not from hibernate when the lid is closed. This is good news. I'd still be curious about how to get it to work from hibernate, but I'm pretty happy about waking from sleep at least.

  Read the article

• Redirecting or routing all traffic to OpenVPN on a Mac OS X client

  - by sdr56p

  I have configured an OpenVPN (2.2.1) server on an Ubuntu virtual machine in the Amazon elastic compute cloud. The server is up and running. I have installed OpenVPN (2.2.1) on a Mac OS X (10.8.2) client and I am using the openvpn2 binary to connect (in opposition to other clients like Tunnelblick or Viscosity). I can connect with the client and successfully ping or ssh the server through the tunnel. However, I can't redirect all internet traffic through the VPN even if I use the push "redirect-gateway def1 bypass-dhcp" option in the server.conf configurations. When I connect to the server with these configurations, I get a successful connection, but then an infinite series of error messages: "write UDPv4: No route to host (code=65)". Traffic routing seems to be compromised because I am not able to access anything anymore, not even the OpenVPN server (by pinging 10.8.0.1 for instance). This is beyond me. I am finding little help on the web and don't know what to try next. I don't think it is a problem of forwarding the traffic on the server since, first, I have also took care of that and, second, I can't even ping the VPN server locally through the tunnel (or ping anything at all for that matter). Thank you for your help. Here is the server.conf. file: port 1194 proto udp dev tun ca ca.crt cert ec2-server.crt key ec2-server.key # This file should be kept secret dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 And the client.conf file: client dev tun proto udp remote servername.com 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert Toto5.crt key Toto5.key ns-cert-type server comp-lzo verb 3 Here is the connection log with the error messages: $ sudo openvpn2 --config client.conf Wed Mar 13 22:58:22 2013 OpenVPN 2.2.1 x86_64-apple-darwin12.2.0 [SSL] [LZO2] [eurephia] built on Mar 4 2013 Wed Mar 13 22:58:22 2013 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Wed Mar 13 22:58:22 2013 LZO compression initialized Wed Mar 13 22:58:22 2013 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Mar 13 22:58:22 2013 Socket Buffers: R=[196724->65536] S=[9216->65536] Wed Mar 13 22:58:22 2013 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Wed Mar 13 22:58:22 2013 Local Options hash (VER=V4): '41690919' Wed Mar 13 22:58:22 2013 Expected Remote Options hash (VER=V4): '530fdded' Wed Mar 13 22:58:22 2013 UDPv4 link local: [undef] Wed Mar 13 22:58:22 2013 UDPv4 link remote: 54.234.43.171:1194 Wed Mar 13 22:58:22 2013 TLS: Initial packet from 54.234.43.171:1194, sid=ffbaf343 d0c1a266 Wed Mar 13 22:58:22 2013 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:22 2013 VERIFY OK: nsCertType=SERVER Wed Mar 13 22:58:22 2013 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:23 2013 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:23 2013 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:23 2013 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:23 2013 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:23 2013 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Mar 13 22:58:23 2013 [ec2-server] Peer Connection Initiated with 54.234.43.171:1194 Wed Mar 13 22:58:25 2013 SENT CONTROL [ec2-server]: 'PUSH_REQUEST' (status=1) Wed Mar 13 22:58:25 2013 PUSH: Received control message: 'PUSH_REPLY,route 10.8.0.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Wed Mar 13 22:58:25 2013 OPTIONS IMPORT: timers and/or timeouts modified Wed Mar 13 22:58:25 2013 OPTIONS IMPORT: --ifconfig/up options modified Wed Mar 13 22:58:25 2013 OPTIONS IMPORT: route options modified Wed Mar 13 22:58:25 2013 ROUTE default_gateway=0.0.0.0 Wed Mar 13 22:58:25 2013 TUN/TAP device /dev/tun0 opened Wed Mar 13 22:58:25 2013 /sbin/ifconfig tun0 delete ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address Wed Mar 13 22:58:25 2013 NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure Wed Mar 13 22:58:25 2013 /sbin/ifconfig tun0 10.8.0.6 10.8.0.5 mtu 1500 netmask 255.255.255.255 up Wed Mar 13 22:58:25 2013 /sbin/route add -net 10.8.0.0 10.8.0.5 255.255.255.0 add net 10.8.0.0: gateway 10.8.0.5 Wed Mar 13 22:58:25 2013 Initialization Sequence Completed ^CWed Mar 13 22:58:30 2013 event_wait : Interrupted system call (code=4) Wed Mar 13 22:58:30 2013 TCP/UDP: Closing socket Wed Mar 13 22:58:30 2013 /sbin/route delete -net 10.8.0.0 10.8.0.5 255.255.255.0 delete net 10.8.0.0: gateway 10.8.0.5 Wed Mar 13 22:58:30 2013 Closing TUN/TAP interface Wed Mar 13 22:58:30 2013 SIGINT[hard,] received, process exiting toto5:ttntec2 Dominic$ sudo openvpn2 --config client.conf --remote ec2-54-234-43-171.compute-1.amazonaws.com Wed Mar 13 22:58:57 2013 OpenVPN 2.2.1 x86_64-apple-darwin12.2.0 [SSL] [LZO2] [eurephia] built on Mar 4 2013 Wed Mar 13 22:58:57 2013 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Wed Mar 13 22:58:57 2013 LZO compression initialized Wed Mar 13 22:58:57 2013 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Mar 13 22:58:57 2013 Socket Buffers: R=[196724->65536] S=[9216->65536] Wed Mar 13 22:58:57 2013 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Wed Mar 13 22:58:57 2013 Local Options hash (VER=V4): '41690919' Wed Mar 13 22:58:57 2013 Expected Remote Options hash (VER=V4): '530fdded' Wed Mar 13 22:58:57 2013 UDPv4 link local: [undef] Wed Mar 13 22:58:57 2013 UDPv4 link remote: 54.234.43.171:1194 Wed Mar 13 22:58:57 2013 TLS: Initial packet from 54.234.43.171:1194, sid=a0d75468 ec26de14 Wed Mar 13 22:58:58 2013 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:58 2013 VERIFY OK: nsCertType=SERVER Wed Mar 13 22:58:58 2013 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:58 2013 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:58 2013 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:58 2013 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:58 2013 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:58 2013 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Mar 13 22:58:58 2013 [ec2-server] Peer Connection Initiated with 54.234.43.171:1194 Wed Mar 13 22:59:00 2013 SENT CONTROL [ec2-server]: 'PUSH_REQUEST' (status=1) Wed Mar 13 22:59:00 2013 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route 10.8.0.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Wed Mar 13 22:59:00 2013 OPTIONS IMPORT: timers and/or timeouts modified Wed Mar 13 22:59:00 2013 OPTIONS IMPORT: --ifconfig/up options modified Wed Mar 13 22:59:00 2013 OPTIONS IMPORT: route options modified Wed Mar 13 22:59:00 2013 ROUTE default_gateway=0.0.0.0 Wed Mar 13 22:59:00 2013 TUN/TAP device /dev/tun0 opened Wed Mar 13 22:59:00 2013 /sbin/ifconfig tun0 delete ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address Wed Mar 13 22:59:00 2013 NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure Wed Mar 13 22:59:00 2013 /sbin/ifconfig tun0 10.8.0.6 10.8.0.5 mtu 1500 netmask 255.255.255.255 up Wed Mar 13 22:59:00 2013 /sbin/route add -net 54.234.43.171 0.0.0.0 255.255.255.255 add net 54.234.43.171: gateway 0.0.0.0 Wed Mar 13 22:59:00 2013 /sbin/route add -net 0.0.0.0 10.8.0.5 128.0.0.0 add net 0.0.0.0: gateway 10.8.0.5 Wed Mar 13 22:59:00 2013 /sbin/route add -net 128.0.0.0 10.8.0.5 128.0.0.0 add net 128.0.0.0: gateway 10.8.0.5 Wed Mar 13 22:59:00 2013 /sbin/route add -net 10.8.0.0 10.8.0.5 255.255.255.0 add net 10.8.0.0: gateway 10.8.0.5 Wed Mar 13 22:59:00 2013 Initialization Sequence Completed Wed Mar 13 22:59:00 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:00 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:01 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:01 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:01 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) ... The routing table after a connection WITHOUT the push redirect-gateway (all traffic is not redirected to the VPN and everything is working fine, I can ping or ssh the OpenVPN server and access all other Internet resources through my default gateway): Destination Gateway Flags Refs Use Netif Expire default user148-1.wireless UGSc 50 0 en1 10.8/24 10.8.0.5 UGSc 2 7 tun0 10.8.0.5 10.8.0.6 UH 3 2 tun0 127 localhost UCS 0 0 lo0 localhost localhost UH 6 6692 lo0 client.openvpn.net client.openvpn.net UH 3 18 lo0 142.1.148/22 link#5 UCS 2 0 en1 user148-1.wireless 0:90:b:27:10:71 UHLWIir 50 0 en1 76 user150-173.wirele localhost UHS 0 0 lo0 142.1.151.255 ff:ff:ff:ff:ff:ff UHLWbI 0 2 en1 169.254 link#5 UCS 1 0 en1 169.254.255.255 0:90:b:27:10:71 UHLSWi 0 0 en1 71 The routing table after a connection with the push redirect-gateway option enable as in the server.conf file above (all internet traffic should be redirected to the VPN tunnel, but nothing is working, I can't access any Internet ressources at all): Destination Gateway Flags Refs Use Netif Expire 0/1 10.8.0.5 UGSc 1 0 tun0 default user148-1.wireless UGSc 7 0 en1 10.8/24 10.8.0.5 UGSc 0 0 tun0 10.8.0.5 10.8.0.6 UHr 6 0 tun0 54.234.43.171/32 0.0.0.0 UGSc 1 0 en1 127 localhost UCS 0 0 lo0 localhost localhost UH 3 6698 lo0 client.openvpn.net client.openvpn.net UH 0 27 lo0 128.0/1 10.8.0.5 UGSc 2 0 tun0 142.1.148/22 link#5 UCS 1 0 en1 user148-1.wireless 0:90:b:27:10:71 UHLWIir 1 0 en1 833 user150-173.wirele localhost UHS 0 0 lo0 169.254 link#5 UCS 1 0 en1 169.254.255.255 0:90:b:27:10:71 UHLSW 0 0 en1

  Read the article

• What is the fall off of subsecond throughput on Ethernet Network Interfaces

  - by Kyle Brandt

  On a network interface, speeds are given in term of data over time, in particular, they are bits per second. However, in the uber-fast world of computing -- a second is kind of a really long time. So for example, given a linear falloff. A 1 GBit per second interface would do 500MBit per half second, 250Mbit per quarter second etc. I imagine at certain units of time, this is no longer linear. Perhaps this is set by ethernet frequencies, system clock speeds, interrupt timers etc. I am sure this varies depending on the system -- but does anyone have more information or whitepapers on this? One of the main reasons I am curious is to understand output drops on interfaces. Even if the speed per second is much lower than the interface can handle -- perhaps there are spikes that cause drops for only small numbers of milliseconds. Perhaps various coalescing would hide this effect -- or perhaps increase it on the receiving interface? Do queues make a difference here? Example: So given if this is linear down to the MS we would have 1Mbit/MS, and if Wireshark isn't distorting what I see, should I see drops when I have a spike beyond 1Mbit?

  Read the article

• Windows Presentation Foundation 4.5 Cookbook Review

  - by Ricardo Peres

  As promised, here’s my review of Windows Presentation Foundation 4.5 Cookbook, that Packt Publishing kindly made available to me. It is an introductory book, targeted at WPF newcomers or users with few experience, following the typical recipes or cookbook style. Like all Packt Publishing books on development, each recipe comes with sample code that is self-sufficient for understanding the concepts it tries to illustrate. It starts on chapter 1 by introducing the most important concepts, the XAML language itself, what can be declared in XAML and how to do it, what are dependency and attached properties as well as markup extensions and events, which should give readers a most required introduction to how WPF works and how to do basic stuff. It moves on to resources on chapter 2, which also makes since, since it’s such an important concept in WPF. Next, chapter 3, come the panels used for laying controls on the screen, all of the out of the box panels are described with typical use cases. Controls come next in chapter 4; the difference between elements and controls is introduced, as well as content controls, headered controls and items controls, and all standard controls are introduced. The book shows how to change the way they look by using templates. The next chapter, 5, talks about top level windows and the WPF application object: how to access startup arguments, how to set the main window, using standard dialogs and there’s even a sample on how to have a irregularly-shaped window. This is one of the most important concepts in WPF: data binding, which is the theme for the following chapter, 6. All common scenarios are introduced, the binding modes, directions, triggers, etc. It talks about the INotifyPropertyChanged interface and how to use it for notifying data binding subscribers of changes in data sources. Data templates and selectors are also covered, as are value converters and data triggers. Examples include master-detail and sorting, grouping and filtering collections and binding trees and grids. Last it covers validation rules and error templates. Chapter 7 talks about the current trend in WPF development, the Model View View-Model (MVVM) framework. This is a well known pattern for connecting things interface to actions, and it is explained competently. A typical implementation is presented which also presents the command pattern used throughout WPF. A complete application using MVVM is presented from start to finish, including typical features such as undo. Style and layout is covered on chapter 8. Why/how to use styles, applying them automatically,  using the many types of triggers to change styles automatically, using Expression Blend behaviors and templates are all covered. Next chapter, 9, is about graphics and animations programming. It explains how to create shapes, transform common UI elements, apply special effects and perform simple animations. The following chapter, 10, is about creating custom controls, either by deriving from UserControl or from an existing control or framework element class, applying custom templates for changing the way the control looks. One useful example is a custom layout panel that arranges its children along a circumference. The final chapter, 11, is about multi-threading programming and how one can integrate it with WPF. Includes how to invoke methods and properties on WPF classes from threads other than the main UI, using background tasks and timers and even using the new C# 5.0 asynchronous operations. It’s an interesting book, like I said, mostly for newcomers. It provides a competent introduction to WPF, with examples that cover the most common scenarios and also give directions to more complex ones. I recommend it to everyone wishing to learn WPF.

  Read the article

• Framework 4 Features: Support for Timed Jobs

  - by Anthony Shorten

  One of the new features of the Oracle Utilities Application Framework V4 is the ability for the batch framework to support Timed Batch. Traditionally batch is associated with set processing in the background in a fixed time frame. For example, billing customers. Over the last few versions their has been functionality required by the products required a more monitoring style batch process. The monitor is a batch process that looks for specific business events based upon record status or other pieces of data. For example, the framework contains a fact monitor (F1-FCTRN) that can be configured to look for specific status's or other conditions. The batch process then uses the instructions on the object to determine what to do. To support monitor style processing, you need to run the process regularly a number of times a day (for example, every ten minutes). Traditional batch could support this but it was not as optimal as expected (if you are a site using the old Workflow subsystem, you understand what I mean). The Batch framework was extended to add additional facilities to support times (and continuous batch which is another new feature for another blog entry). The new facilities include: The batch control now defines the job as Timed or Not Timed. Non-Timed batch are traditional batch jobs. The timer interval (the interval between executions) can be specified The timer can be made active or inactive. Only active timers are executed. Setting the Timer Active to inactive will stop the job at the next time interval. Setting the Timer Active to Active will start the execution of the timed job. You can specify the credentials, language to view the messages and an email address to send the a summary of the execution to. The email address is optional and requires an email server to be specified in the relevant feature configuration. You can specify the thread limits and commit intervals to be sued for the multiple executions. Once a timer job is defined it will be executed automatically by the Business Application Server process if the DEFAULT threadpool is active. This threadpool can be started using the online batch daemon (for non-production) or externally using the threadpoolworker utility. At that time any batch process with the Timer Active set to Active and Batch Control Type of Timed will begin executing. As Timed jobs are executed automatically then they do not appear in any external schedule or are managed by an external scheduler (except via the DEFAULT threadpool itself of course). Now, if the job has no work to do as the timer interval is being reached then that instance of the job is stopped and the next instance started at the timer interval. If there is still work to complete when the interval interval is reached, the instance will continue processing till the work is complete, then the instance will be stopped and the next instance scheduled for the next timer interval. One of the key ways of optimizing this processing is to set the timer interval correctly for the expected workload. This is an interesting new feature of the batch framework and we anticipate it will come in handy for specific business situations with the monitor processes.

  Read the article

• It’s the thought that counts…

  - by Tony Davis

  I recently finished editing a book called Tribal SQL, and it was a fantastic experience. It’s a community-sourced book written by first-timers. Fifteen previously unpublished authors contributed one chapter each, with the seemingly simple remit to write about “what makes them passionate about working with SQL Server, something that all SQL Server DBAs and developers really need to know”. Sure, some of the writing skills were a bit rusty as one would expect from busy people, but the ideas and energy were sheer nectar. Any seasoned editor can deal easily with the problem of fixing the output of untrained writers. We can handle with the occasional technical error too, which is why we have technical reviewers. The editor’s real job is to hone the clarity and flow of ideas, making the author’s knowledge and experience accessible to as many others as possible. What the writer needs to bring, on the other hand, is enthusiasm, attention to detail, common sense, and a sense of the person behind the writing. If any of these are missing, no editor can fix it. We can see these essential characteristics in many of the more seasoned and widely-published writers about SQL. To illustrate what I mean by enthusiasm, or passion, take a look at the work of Laerte Junior or Fabiano Amorim. Both authors have English as a second language, but their energy, enthusiasm, sheer immersion in a technology and thirst to know more, drives them, with a little editorial help, to produce articles of far more practical value than one can find in the “manuals”. There’s the attention to detail of the likes of Jonathan Kehayias, or Paul Randal. Read their work and one begins to understand the knowledge coupled with incredible rigor, the willingness to bend and test every piece of advice offered to make sure it’s correct, that marks out the very best technical writing. There’s the common sense of someone like Louis Davidson. All writers, including Louis, like to stretch the grey matter of their readers, but some of the most valuable writing is that which takes a complicated idea, or distils years of experience, and expresses it in a way that sounds like simple common sense. There’s personality and humor. Contrary to what you may have been told, they can and do mix well with technical writing, as long as they don’t become a distraction. Read someone like Rodney Landrum, or Phil Factor, for numerous examples of articles that teach hard technical lessons but also make you smile at least twice along the way. Writing well is not easy and it takes a certain bravery to expose your ideas and knowledge for dissection by others, but it doesn’t mean that writing should be the preserve only of those trained in the art, or best left to the MVPs. I believe that Tribal SQL is testament to the fact that if you have passion for what you do, and really know your topic then, with a little editorial help, you can write, and people will learn from what you have to say. You can read a sample chapter, by Mark Rasmussen, in this issue of Simple-Talk and I hope you’ll consider checking out the book (if you needed any further encouragement, it’s also for a good cause, Computers4Africa). Cheers, Tony  

  Read the article

• Red Meat's Music is Rare - and Well Done

  - by Oracle OpenWorld Blog Team

  By Karen Shamban The blogger has questions; San Francisco-based country band Red Meat has answers. Although we forgot to ask how they got their band name, dang it. Read on and enjoy the honesty and insight. Q. What do you like best about performing in front of a live audience?A. Probably just having fun and entertaining the audience. We've been together for almost two decades, and in that time we've played for crowds of five people, and for crowds of more than 15,000. Both are equally important to us, and just as fun. We turn Jill and Smelley loose on the between-songs repartee, and let the songs shine through. On the best night, we feed on the audience's love and vice-versa. It's emotional vampirism of the best sort. [Blogger's note: now that whole "red meat" thing is starting to make sense ...] Q. Do you prefer smaller, intimate venues or larger, louder ones? Why?A. We love both. Whether it's a chance to connect with a small room or huge audience, we always try to hit 'em between the eyes! Q. What about your fans surprises you?A. Since we've been together for so long, we're pretty much on our third generation of fans now. We're excited that the Bakersfield sound has that same effect on the new, younger fans as it did on the punk rockers that we played to 20 years ago. And we still see them at our shows too! Q. What about your live act surprises your fans?A. For people who haven't seen Red Meat before, they may be dragged to a show thinking they don't like country music. But they're surprised to hear it done in a way that excites them so much. We get a lot of first-timers coming up to us after a performance and asking, "Wait, THAT'S what country music can sound like?" Q. There are going to be a lot of technical people (you could call them geeks) in the Oracle crowd - what are they going to love about your performance?A. Just what everyone loves about a Red Meat show - the chance to drink beer, dance, get rowdy, and have a great time. Q. Have you been on tour recently? If so, what do you like about touring, and what do you dislike?A. Actually, we're going to be coming off the road immediately into the Oracle OpenWorld Music Festival, having just played some Texas dates. On tour, we love playing for fans who don't get to see us as often as our California fans do. And food. Most of our conversations in the van center around food. Q. Ever think about playing another kind of music? If so, what, and why?A. Our tastes and influences in the band run all over the place. Obviously we love the Bakersfield artists - Buck Owens, Merle Haggard, Dwight Yoakam - but we love other types of roots music as well, along with the Beatles, NRBQ, MC5, punk/new wave, and countless bar bands that we've had the privilege of playing with through the years. But as far as playing a different kind of music as Red Meat? Nah. We love what we're doing. Q. What are the top three things people should know about your music?A1. Country music, done right, has unlimited soul.A2. Red Meat is a modern band, playing original material, with a great debt to the Bakersfield sound of Buck Owens and Merle Haggard.A3. It's FUN. More details on the Festival and the band: Oracle OpenWorld Music Festival Red Meat

  Read the article

• High Resolution Timeouts

  - by user12607257

  The default resolution of application timers and timeouts is now 1 msec in Solaris 11.1, down from 10 msec in previous releases. This improves out-of-the-box performance of polling and event based applications, such as ticker applications, and even the Oracle rdbms log writer. More on that in a moment. As a simple example, the poll() system call takes a timeout argument in units of msec: System Calls poll(2) NAME poll - input/output multiplexing SYNOPSIS int poll(struct pollfd fds[], nfds_t nfds, int timeout); In Solaris 11, a call to poll(NULL,0,1) returns in 10 msec, because even though a 1 msec interval is requested, the implementation rounds to the system clock resolution of 10 msec. In Solaris 11.1, this call returns in 1 msec. In specification lawyer terms, the resolution of CLOCK_REALTIME, introduced by POSIX.1b real time extensions, is now 1 msec. The function clock_getres(CLOCK_REALTIME,&res) returns 1 msec, and any library calls whose man page explicitly mention CLOCK_REALTIME, such as nanosleep(), are subject to the new resolution. Additionally, many legacy functions that pre-date POSIX.1b and do not explicitly mention a clock domain, such as poll(), are subject to the new resolution. Here is a fairly comprehensive list: nanosleep pthread_mutex_timedlock pthread_mutex_reltimedlock_np pthread_rwlock_timedrdlock pthread_rwlock_reltimedrdlock_np pthread_rwlock_timedwrlock pthread_rwlock_reltimedwrlock_np mq_timedreceive mq_reltimedreceive_np mq_timedsend mq_reltimedsend_np sem_timedwait sem_reltimedwait_np poll select pselect _lwp_cond_timedwait _lwp_cond_reltimedwait semtimedop sigtimedwait aiowait aio_waitn aio_suspend port_get port_getn cond_timedwait cond_reltimedwait setitimer (ITIMER_REAL) misc rpc calls, misc ldap calls This change in resolution was made feasible because we made the implementation of timeouts more efficient a few years back when we re-architected the callout subsystem of Solaris. Previously, timeouts were tested and expired by the kernel's clock thread which ran 100 times per second, yielding a resolution of 10 msec. This did not scale, as timeouts could be posted by every CPU, but were expired by only a single thread. The resolution could be changed by setting hires_tick=1 in /etc/system, but this caused the clock thread to run at 1000 Hz, which made the potential scalability problem worse. Given enough CPUs posting enough timeouts, the clock thread could be a performance bottleneck. We fixed that by re-implementing the timeout as a per-CPU timer interrupt (using the cyclic subsystem, for those familiar with Solaris internals). This decoupled the clock thread frequency from timeout resolution, and allowed us to improve default timeout resolution without adding CPU overhead in the clock thread. Here are some exceptions for which the default resolution is still 10 msec. The thread scheduler's time quantum is 10 msec by default, because preemption is driven by the clock thread (plus helper threads for scalability). See for example dispadmin, priocntl, fx_dptbl, rt_dptbl, and ts_dptbl. This may be changed using hires_tick. The resolution of the clock_t data type, primarily used in DDI functions, is 10 msec. It may be changed using hires_tick. These functions are only used by developers writing kernel modules. A few functions that pre-date POSIX CLOCK_REALTIME mention _SC_CLK_TCK, CLK_TCK, "system clock", or no clock domain. These functions are still driven by the clock thread, and their resolution is 10 msec. They include alarm, pcsample, times, clock, and setitimer for ITIMER_VIRTUAL and ITIMER_PROF. Their resolution may be changed using hires_tick. Now back to the database. How does this help the Oracle log writer? Foreground processes post a redo record to the log writer, which releases them after the redo has committed. When a large number of foregrounds are waiting, the release step can slow down the log writer, so under heavy load, the foregrounds switch to a mode where they poll for completion. This scales better because every foreground can poll independently, but at the cost of waiting the minimum polling interval. That was 10 msec, but is now 1 msec in Solaris 11.1, so the foregrounds process transactions faster under load. Pretty cool.

  Read the article

• How to use drag and drop within a UIScrollView

  - by user249488

  I am trying to drag and drop UIViews within a UIScrollView. I'd like the UIScrollView to scroll if I drag a UIView so that it intersects the top or bottom of the ScrollView. If it touches the top, it should scroll up. If it touches the bottom, it should scroll down. Once the UIView is moved such that it is no longer intersecting the top or bottom, the scrolling should stop. The first approach I tried was to start an NSTimer whenever I detected that the UIView intersected with the top or bottom of the scrollview. The timer would scroll the UIScrollView bit by bit until it was invalidated. This resulted in very jerky scrolling, since there is no way to predict when the timers will fire. My current approach is to simply scroll all the way to the top or bottom of the ScrollView, like this: [UIView beginAnimations:nil context:NULL]; [UIView setAnimationCurve:UIViewAnimationCurveEaseInOut]; [UIView setAnimationDuration:1.0]; [self.parentScrollview setContentOffset:newOffset animated:NO]; [UIView commitAnimations]; In order to stop scrolling, I try to determine the position of the touch in the touchesMoved: delegate, and use that to calculate the contentOffset to use for the scrollView. The problem is, when I try to get the location in the view via [[touches anyObject] locationInView:self], I get the final end location, rather than the current location. I'm guessing that's because the contentOffset on the scrollView is set immediately. Is there a way to get the actual location of a touch in a situation like this? Or any other way to set the contentOffset when I interrupt the scrolling animation?

  Read the article

• Showing right sub-ul of parent ul menu

  - by Micke

  Hello, i have this html menu: <ul id='main'> <li class='active current' id='lighty'> <a href='/'>Lighty</a> <ul> <li class='sub'> <a href='/'>Hem</a> </li> </ul> </li> <li id='community'> <a href='/community'>Community</a> </li> </ul> And this jquery: $("#menu ul > li").mouseenter(function(){ id = $(this).attr("id"); $("#menu #main li").removeClass("active"); $(this).addClass("active"); }).mouseleave(function(){ id = $(this).attr("id"); menu.timers[id] = setTimeout(function(){$("#menu #main li#"+id).removeClass("active");}, 2000); }); What i am trying to acomplish is that when i hover one of the li's in the main ul the child ul of that li should be displayed. and when i move the mouse out of the li or the child ul the menu should be visible for 2 seconds. It works through the main li button but if on the child ul and move out it just disapears, it doesnt wait for two seconds. The waiting two seconds is so you can go in to the menu if you accidentaly move the mouse out of it. Can anybody help me to fix this error? Maybe you have a better solution? Here is also a screenshot on how the menu looks if it helps: screen shot under or click here

  Read the article

• Lambdas within Extension methods: Possible memory leak?

  - by Oliver

  I just gave an answer to a quite simple question by using an extension method. But after writing it down i remembered that you can't unsubscribe a lambda from an event handler. So far no big problem. But how does all this behave within an extension method?? Below is my code snipped again. So can anyone enlighten me, if this will lead to myriads of timers hanging around in memory if you call this extension method multiple times? I would say no, cause the scope of the timer is limited within this function. So after leaving it no one else has a reference to this object. I'm just a little unsure, cause we're here within a static function in a static class. public static class LabelExtensions { public static Label BlinkText(this Label label, int duration) { Timer timer = new Timer(); timer.Interval = duration; timer.Tick += (sender, e) => { timer.Stop(); label.Font = new Font(label.Font, label.Font.Style ^ FontStyle.Bold); }; label.Font = new Font(label.Font, label.Font.Style | FontStyle.Bold); timer.Start(); return label; } }

  Read the article

• AS3 - Unloaded AVM1 swfs trace out as unloaded but memory is not freed for the AVM2 machine

  - by puppbits

  I have a large project built in as3. Part of its main functionality is to load and unload various as2 swfs. The problem is that the memory ins't free up once they are unloaded. I have access to the as2 swfs code base and destroyed all objects, stopped and killed timers, listeners, removed from stage, destroyed all the MovieClip.protoypes that were created. They look to be clean as far as the AS2 debugger show no remnants of the object after the destroy function is run. In AS3 i've closed the local connection, cleaned all references/listeners to the AVM1Movie and ran Loader.unloadAndStop(). The trace out in flex says the swf was unloaded but looking at windows task manager the memory usage never drops to when it was before the as2 swf was loaded. Each as2 swf can take up to 80 megs each time it's run so memory gets eaten up fast and loading and unloading a few as2 files. At this point if the AS2 swfs are unloaded the only thing that I can assume that could be left is MovieClip.prototype and/or _global, _root variables add during the AS2's run time. But i've gone through those and can't find anything else that might be sticking. Has anyone ever seen problems before with the AVM1 machine not freeing up its memory?

  Read the article

• Strange behavior due to wx.Frame.SetTitle

  - by Anurag Uniyal

  In a wxPython application, which i am porting to Mac OSX, I set title of app frame every 500msec in update UI event, and due to that all the panels and windows are refreshed. That seems strange to me and almost halts my application which has many custom drawn controls and screens. I wanted to know what could be the reason behind it, is it normal for MAC? Here is a self-constrained script which replicates the scenario using timers. It keeps on printing "on paint" every 500ms because in timer I set title every 500ms. import wx app = wx.PySimpleApp() frame = wx.Frame(None, title="BasePainter Test") painter = wx.Panel(frame) def onPaint(event): dc = wx.PaintDC(painter) print "onPaint" painter.Bind(wx.EVT_PAINT, onPaint) def loop(): frame.SetTitle(frame.GetTitle()) wx.CallLater(500, loop) loop() frame.Show(True) app.SetTopWindow(frame) app.MainLoop() My system details: >>> sys.version '2.5 (r25:51918, Sep 19 2006, 08:49:13) \n[GCC 4.0.1 (Apple Computer, Inc. build 5341)]' >>> wx.VERSION (2, 8, 10, 1, '') >>> os.uname() ('Darwin', 'agyeys-mac-mini.local', '9.8.0', 'Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386', 'i386')

  Read the article

• Handling Erlang inets http client errors

  - by Justin

  I have an Erlang app which makes a large number of http calls to external sites using inets, using the code below case http:request(get, {Url, []}, [{autoredirect, false}], []) of {ok, {{_, Code, _}, _, Body}}-> case Code of 200 -> HandlerFn(Body); _ -> {error, io:format("~s returned HTTP ~p", [Broker, Code])} end; Response -> %% block to handle unexpected responses from inets {error, io:format("~s returned ~p", [Broker, Response])} end. There is an explicit block to handle anything strange inets might return [Response]. Despite this, I still get what look like inets error reports dumped to the console [sample below]. What am I doing wrong here ? Do I need to configure some kind of inets error handler elsewhere ? Thanks. -- =ERROR REPORT==== 24-Apr-2010::06:49:47 === ** Generic server <0.6618.0 terminating ** Last message in was {connect_and_send, {request,#Ref<0.0.0.139358,<0.6613.0,0,http, {"***",80}, "****************", [],get, {http_request_h,undefined,"keep-alive", undefined,undefined,undefined,undefined, undefined,undefined,undefined,undefined, undefined,undefined,undefined,undefined, undefined,undefined,"news.bbc.co.uk", undefined,undefined,undefined,undefined, undefined,undefined,undefined,undefined, undefined,[],undefined,undefined,undefined, undefined,"0",undefined,undefined, undefined,undefined,undefined,undefined,[]}, {[],[]}, {http_options,"HTTP/1.1",infinity,false,[], undefined,false,infinity}, "*******************", [],none,[],1272088179114,undefined,undefined}} * When Server state == {state, {request,#Ref<0.0.0.139358,<0.6613.0,0,http, {"********",80}, "***************", [],get, {http_request_h,undefined,"keep-alive", undefined,undefined,undefined,undefined, undefined,undefined,undefined,undefined, undefined,undefined,undefined,undefined, undefined,undefined,"news.bbc.co.uk", undefined,undefined,undefined,undefined, undefined,undefined,undefined,undefined, undefined,[],undefined,undefined, undefined,undefined,"0",undefined, undefined,undefined,undefined,undefined, undefined,[]}, {[],[]}, {http_options,"HTTP/1.1",infinity,false,[], undefined,false,infinity}, "**********************", [],none,[],1272088179114,undefined,undefined}, undefined,undefined,undefined,undefined,undefined, {[],[]}, {[],[]}, undefined,[],nolimit,nolimit, {options, {undefined,[]}, 0,2,5,120000,2,disabled,false,inet,default, default,[]}, {timers,[],undefined}, httpc_manager,undefined} ** Reason for termination == ** {error,{connect_failed,{#Ref<0.0.0.139358,{error,nxdomain}}}} =ERROR REPORT==== 24-Apr-2010::06:49:47 === HTTPC-MANAGER handler (<0.6618.0, started) failed to connect and/or send request #Ref<0.0.0.139358 Result: {error,{connect_failed,{#Ref<0.0.0.139358,{error,nxdomain}}}}

  Read the article

• Thread implemented as a Singleton

  - by rocknroll

  Hi all, I have a commercial application made with C,C++/Qt on Linux platform. The app collects data from different sensors and displays them on GUI. Each of the protocol for interfacing with sensors is implemented using singleton pattern and threads from Qt QThreads class. All the protocols except one work fine. Each protocol's run function for thread has following structure: void <ProtocolClassName>::run() { while(!mStop) //check whether screen is closed or not { mutex.lock() while(!waitcondition.wait(&mutex,5)) { if(mStop) return; } //Code for receiving and processing incoming data mutex.unlock(); } //end while } Hierarchy of GUI. 1.Login screen. 2. Screen of action. When a user logs in from login screen, we enter the action screen where all data is displayed and all the thread's for different sensors start. They wait on mStop variable in idle time and when data arrives they jump to receiving and processing data. Incoming data for the problem protocol is 117 bytes. In the main GUI threads there are timers which when timeout, grab the running instance of protocol using <ProtocolName>::instance() function Check the update variable of singleton class if its true and display the data. When the data display is done they reset the update variable in singleton class to false. The problematic protocol has the update time of 1 sec, which is also the frame rate of protocol. When I comment out the display function it runs fine. But when display is activated the application hangs consistently after 6-7 hours. I have asked this question on many forums but haven't received any worthwhile suggestions. I Hope that here I will get some help. Also, I have read a lot of literature on Singleton, multithreading, and found that people always discourage the use of singletons especially in C++. But in my application I can think of no other design for implementation. Thanks in advance A Hapless programmer

  Read the article

• C#: Why am I still getting an RCW error when exiting my application?

  - by shifuimam

  To be specific, the error is: An attempt has been made to free an RCW that is in use. The RCW is in use on the active thread or another thread. Attempting to free an in-use RCW can cause corruption or data loss. The application in question is a small applet that displays the current clock speed of the CPU as a system tray icon. I'm using a System.Timers.Timer object to refresh the systray icon at an interval of 2.5 seconds. There's a single context menu item to exit the application, which uses the following function to unload everything: public void ExitApp(object sender, EventArgs e) { //stop and disable the timer theInterval.Stop(); theInterval.Enabled = false; //unload the system tray icon TheIcon.Visible = false; //exit the application Application.Exit(); } If I take out everything but Application.Exit(); I get an RCW error and the systray icon doesn't go away until I mouse over it. Everything was working perfectly until I changed the window style of the hidden form used to initialize the systray icon and the timer. If it helps any, I'm using C# 2010 Express.

  Read the article

• Game of life in F# with accelerator

  - by jpalmer

  I'm trying to write life in F# using accelerator v2, but for some odd reason my output isn't square despite all my arrays being square - It appears that everything but a rectangular area in the top left of the matrix is being set to false. I've got no idea how this could be happening as all my operations should treat the entire array equally. Any ideas? open Microsoft.ParallelArrays open System.Windows.Forms open System.Drawing type IPA = IntParallelArray type BPA = BoolParallelArray type PAops = ParallelArrays let RNG = new System.Random() let size = 1024 let arrinit i = Array2D.init size size (fun x y -> i) let target = new DX9Target() let threearr = new IPA(arrinit 3) let twoarr = new IPA(arrinit 2) let onearr = new IPA(arrinit 1) let zeroarr = new IPA(arrinit 0) let shifts = [|-1;-1|]::[|-1;0|]::[|-1;1|]::[|0;-1|]::[|0;1|]::[|1;-1|]::[|1;0|]::[|1;1|]::[] let progress (arr:BPA) = let sums = shifts //adds up whether a neighbor is on or not |> List.fold (fun (state:IPA) t ->PAops.Add(PAops.Cond(PAops.Rotate(arr,t),onearr,zeroarr),state)) zeroarr PAops.Or(PAops.CompareEqual(sums,threearr),PAops.And(PAops.CompareEqual(sums,twoarr),arr)) //rule for life let initrandom () = Array2D.init size size (fun x y -> if RNG.NextDouble() > 0.5 then true else false) type meform () as self= inherit Form() let mutable array = new BoolParallelArray(initrandom()) let timer = new System.Timers.Timer(1.0) //redrawing timer do base.DoubleBuffered <- true do base.Size <- Size(size,size) do timer.Elapsed.Add(fun _ -> self.Invalidate()) do timer.Start() let draw (t:Graphics) = array <- array |> progress let bmap = new System.Drawing.Bitmap(size,size) target.ToArray2D array |> Array2D.iteri (fun x y t -> if not t then bmap.SetPixel(x,y,Color.Black)) t.DrawImageUnscaled(bmap,0,0) do self.Paint.Add(fun t -> draw t.Graphics) do Application.Run(new meform())

  Read the article

• Issue in parsing the GridViewRows in a Telerik RadGridView

  - by cricketmovies

  Hi, I would like to do something similar what we do in ASP.NET where we parse through all the rows in a GridView and assign a particular value to a particular cell in a row which has a matching TaskId as the current Id. This has to happen in a Tick function of a Dispatcher Timer object. Since I have a Start Timer button Column for every row in a GridView. Upon a particular row's Start Timer Button click, I have to start its timer and display in a cell in that row. Similarly there can be multiple timers running in parallel. For this I need to be able to check the task Id of the particular task and keep updating the cell values with the updated time in all of the tasks that have a Timer Started. TimeSpan TimeRemaining = somevalue; string CurrentTaskId = "100"; foreach(GridViewRow row in RadGridView1.Rows) // Here I tried RadGridView1.ChildrenOfType() as well but it has null { if( (row.DataContext as Task).TaskId == CurrentTaskId ) row.Cells[2].Content = a.TaskTimeRemaining.ToString(); } Can someone please let me know how do I get this functionality using the Telerik RadGridView? Cheers, Syed.

  Read the article

• c#: how do i search for a string with quotes

  - by every_answer_gets_a_point

  i am searching for this string: <!--m--><li class="g w0"><h3 class=r> within the html source of this link: "http://www.google.com/search?sourceid=chrome&ie=UTF-8&q=Santarus Inc?" this is how i am searching for it: d=html.IndexOf(@"<!--m--><li class=""g w0""><h3 class=r><a href=""",1); for some reason it is finding an occurence of it that is incorrect. (it says that it is at position 45 (another words d=45) but this incorrect here are the first couple hundred characters of the string html: <!doctype html><head><title>Santarus Inc&#8206; - Google Search</title><script>window.google={kEI:\"b6jES5nPD4rysQOokrGDDQ\",kEXPI:\"23729,24229,24249,24260,24414,24457\",kCSI:{e:\"23729,24229,24249,24260,24414,24457\",ei:\"b6jES5nPD4rysQOokrGDDQ\",expi:\"23729,24229,24249,24260,24414,24457\"},ml:function(){},kHL:\"en\",time:function(){return(new Date).getTime()},log:function(b,d,c){var a=new Image,e=google,g=e.lc,f=e.li;a.onerror=(a.onload=(a.onabort=function(){delete g[f]}));g[f]=a;c=c||\"/gen_204?atyp=i&ct=\"+b+\"&cad=\"+d+\"&zx=\"+google.time();a.src=c;e.li=f+1},lc:[],li:0,Toolbelt:{}};\nwindow.google.sn=\"web\";window.google.timers={load:{t:{start:(new Date).getTime()}}};try{}catch(u){}window.google.jsrt_kill=1;\n</script><style>body{background:#fff;color:#000;margin:3px 8px}#gbar,#guser{font-size:13px;padding-top:1px !important}#gbar{float:left;height:22px}#guser{padding-bottom:7px !important;text-align:right}.gbh,.gbd{border-top:1px solid #c9d7f1;font-size:1px}.gbh

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11  | Next Page >