Search Results

Search found 193 results on 8 pages for 'vacation'.

Page 8/8 | < Previous Page | 4 5 6 7 8 

  • Windows 7, file properties - Is "date accessed" ALWAYS 100% accurate?

    - by Robert
    Hello, Here's the situation: I went on vacation for a couple of weeks, but before I left, I took the harddrive out of my computer and hid it in a different location. Upon coming back on Monday and putting the harddrive back in my computer, I right-clicked on different files to see their properties. Interestingly enough, several files had been accessed during the time I was gone! I right-clicked different files in various locations on the harddrive, and all of these suspect files had been accessed within a certain time range (Sunday, ?January ?09, ?2011, approximately ??between 6:52:16 PM - 7:16:25 PM). Some of them had been accessed at the exact same time--down to the very second. This makes me think that someone must have done a search on my harddrive for certain types of files and then copied all those files to some other medium. The Windows 7 installation on this harddrive is password protected, but NOT encrypted, so they could have easily put the harddrive into an enclosure/toaster to access it from a different computer. Of course I did not right-click every single file on my computer, but did so in different folders. For instance, one of the folders I went through has different types of files: .mp3, ,prproj, .3gp, .mpg, .wmv, .xmp, .txt with file-sizes ranging from 2 KB to 29.7 MB (there is also a sub-folder in this folder which contains only .jpg files); however, of all these different types of files in this folder and its subfolder, all of them had been accessed (including the .jpg files from the sub-folder) EXCEPT the .mp3 files (if it makes any difference, the .mp3 files in this folder range in size from 187 KB to 4881 KB). Additionally, this sub-folder which contained only .jpg files (48 .jpg files to be exact) was not accessed during this time--only the .jpg files within it were accessed-- (between 6:57:03 PM - 6:57:08 PM). I thought that perhaps this was some kind of Windows glitch that was displaying the wrong access date, but then I looked at the "date created" and "date modified" for all of these files in question, and their created/modified dates and times were spot on correct. My first thought was that someone put the harddrive into an enclosure/toaster and viewed the files; but then I realized that this was impossible because several of the files had been accessed at the same exact time down to the second. So this made me think that the only other way the "date accessed" could have changed would have been if someone copied the files. Is there any chance at all whatsoever that this is some kind of Windows glitch or something, or is it a fact that someone was indeed accessing my files (and if someone was accessing my files, am I right about the files in question having been copied)? Is there any other possibility for what could have happened? Do I need to use any kinds of forensics tools to further investigate this matter (and if so, which tools), or is there any other way in which I can be certain of what took place in that timeframe the day before I got back? Or is what I see with Windows 7 good enough (i.e. accurate and truthful)? Thanks in advance, and please let me know if any other details are required on my part.

    Read the article

  • Week in Geek: New Security Flaw Confirmed for Internet Explorer Edition

    - by Asian Angel
    This week we learned how to use a PC to stay entertained while traveling for the holidays, create quality photo prints with free software, share links between any browser and any smartphone, create perfect Christmas photos using How-To Geek’s 10 best how-to photo guides, and had fun decorating Firefox with a collection of Holiday 2010 Personas themes. Photo by Repoort. Random Geek Links Photo by Asian Angel. Critical 0-Day Flaw Affects All Internet Explorer Versions, Microsoft Warns Microsoft has confirmed a zero-day vulnerability affecting all supported versions of Internet Explorer, including IE8, IE7 and IE6. Note: Article contains link to Microsoft Security Advisory detailing two work-arounds until a security update is released. Hackers targeting human rights, indie media groups Hackers are increasingly hitting the Web sites of human rights and independent media groups in an attempt to silence them, says a new study released this week by Harvard University’s Berkman Center for Internet & Society. OpenBSD: audits give no indication of back doors So far, the analyses of OpenBSD’s crypto and IPSec code have not provided any indication that the system contains back doors for listening to encrypted VPN connections. But the developers have already found two bugs during their current audits. Sophos: Beware Facebook’s new facial-recognition feature Facebook’s new facial recognition software might result in undesirable photos of users being circulated online, warned a security expert, who urged users to keep abreast with the social network’s privacy settings to prevent the abovementioned scenario from becoming a reality. Microsoft withdraws flawed Outlook update Microsoft has withdrawn update KB2412171 for Outlook 2007, released last Patch Tuesday, after a number of user complaints. Skype: Millions still without service Skype was still working to right itself going into the holiday weekend from a major outage that began this past Wednesday. Mozilla improves sync setup and WebGL in Firefox 4 beta 8 Firefox 4.0 beta 8 brings better support for WebGL and introduces an improved setup process for Firefox Sync that simplifies the steps for configuring the synchronization service across multiple devices. Chrome OS the litmus test for cloud The success or failure of Google’s browser-oriented Chrome OS will be the litmus test to decide if the cloud is capable of addressing user needs for content and services, according to a new Ovum report released Monday. FCC Net neutrality rules reach mobile apps The Federal Communications Commission (FCC) finally released its long-expected regulations on Thursday and the related explanations total a whopping 194 pages. One new item that was not previously disclosed: mobile wireless providers can’t block “applications that compete with the provider’s” own voice or video telephony services. KDE and the Document Foundation join Open Invention Network The KDE e.V. and the Document Foundation (TDF) have both joined the Open Invention Network (OIN) as licensees, expanding the organization’s roster of supporters. Report: SEC looks into Hurd’s ousting from HP The scandal surrounding Mark Hurd’s departure from the world’s largest technology company in August has officially drawn attention from the U.S. Securities and Exchange Commission. Report: Google requests delay of new Google TVs Google TV is apparently encountering a bit of static that has resulted in a programming change. Geek Video of the Week This week we have a double dose of geeky video goodness for you with the original Mac vs PC video and the trailer for the sequel. Photo courtesy of Peacer. Mac vs PC Photo courtesy of Peacer. Mac vs PC 2 Trailer Random TinyHacker Links Awesome Tools To Extract Audio From Video Here’s a list of really useful, and free tools to rip audio from videos. Getting Your iPhone Out of Recovery Mode Is your iPhone stuck in recovery mode? This tutorial will help you get it out of that state. Google Shared Spaces Quickly create a shared space and collaborate with friends online. McAfee Internet Security 2011 – Upgrade not worthy of a version change McAfee has released their 2011 version of security products. And as this review details, the upgrades are minimal when compared to their 2010 products. For more information, check out the review. 200 Countries Plotted Hans Rosling’s famous lectures combine enormous quantities of public data with a sport’s commentator’s style to reveal the story of the world’s past, present and future development. Now he explores stats in a way he has never done before – using augmented reality animation. Super User Questions Enjoy looking through this week’s batch of popular questions and answers from Super User. How to restore windows 7 to a known working state every time it boots? Is there an easy way to mass-transfer all files between two computers? Coffee spilled inside computer, damaged hard drive Computer does not boot after ram upgrade Keyboard not detected when trying to install Ubuntu 10.10 How-To Geek Weekly Article Recap Have you had a super busy week while preparing for the holiday weekend? Then here is your chance to get caught up on your reading with our five hottest articles for the week. Ask How-To Geek: Rescuing an Infected PC, Installing Bloat-free iTunes, and Taming a Crazy Trackpad How to Use the Avira Rescue CD to Clean Your Infected PC Eight Geektacular Christmas Projects for Your Day Off VirtualBox 4.0 Rocks Extensions and a Simplified GUI Ask the Readers: How Many Monitors Do You Use with Your Computer? One Year Ago on How-To Geek Here are more great articles from one year ago for you to read and enjoy during the holiday break. Enjoy Distraction-Free Writing with WriteMonkey Shutter is a State of Art Screenshot Tool for Ubuntu Get Hex & RGB Color Codes the Easy Way Find User Scripts for Your Favorite Websites the Easy Way Access Your Unsorted Bookmarks the Easy Way (Firefox) The Geek Note That “wraps” things up for this week and we hope that everyone enjoys the rest of their holiday break! Found a great tip during the break? Then be sure to send it in to us at [email protected]. Photo by ArSiSa7. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Simon’s Cat Explores the Christmas Tree! [Video] The Outdoor Lights Scene from National Lampoon’s Christmas Vacation [Video] The Famous Home Alone Pizza Delivery Scene [Classic Video] Chronicles of Narnia: The Voyage of the Dawn Treader Theme for Windows 7 Cardinal and Rabbit Sharing a Tree on a Cold Winter Morning Wallpaper An Alternate Star Wars Christmas Special [Video]

    Read the article

  • SQL SERVER – Developer Training Resources and Summary Roundup

    - by pinaldave
    It is always pleasure for any author when other renowned authors in the industry write about you. Earlier I wrote a five part blog series on Developer Training and I have received a phenomenal response to the series. I have received plenty of comments, questions and feedback. I thought it would be nice to sum up the whole series as well answer a few of the questions received. Quick Recap Developer Training - Importance and Significance - Part 1 In this part we discussed the importance of training in the real world. The most important and valuable resource any company is its employee. Employees who have been well-trained will be better at their jobs and produce a better product.  An employee who is well trained obviously knows more about their job and all the technical aspects. I have a very high opinion about training employees and it is the most important task. Developer Training – Employee Morals and Ethics – Part 2 In this part we discussed the most crucial components of training. Often employees are expecting the company to pay for their training and the company expresses no interest in training the employee. Quite often training expenses are the real issue for both the employee and employer. There are companies that pay for 100% of the expenses and there are employees who opt for training on their own expense during their personal time. Training is often looked at as vacation by employee and employers and we need to change this mind-set. One of the ways is to report back the learning to your manager and implement newly learned knowledge in day-to-day work. Developer Training – Difficult Questions and Alternative Perspective - Part 3 This part was the most difficult to write as I tried to address a few difficult questions and answers. Training is such a sensitive issue that many developers when not receiving chance for training think about leaving the organization. The manager often feels pressure to accommodate every single employee for training even though his training budget is limited. It is indeed the responsibility of the developer to get maximum advantage from the training. Training immediately helps organizations but stays as a part of an employee’s knowledge forever. Developer Training – Various Options for Developer Training – Part 4 In this part I tried to explore a few methods and options for training. The generic feedback I received on this blog post was short and I should have explored each of the subject of the training in details. I believe there are two big buckets of training 1) Instructor Lead Training and 2) Self Lead Training. The common element between both the methods is “learning material”. Learning material can be of any format – videos, books, paper notes or just a plain black board. Instructor-led training is a very effective mode but not possible every single time. During the course of the developer’s career, one has to learn lots of new technology and it is almost impossible to have a quality trainer available on that subject at that time. Books are most effective and proven methods, however, it always helps if someone explains the concepts of the book with a demonstration. In recent times I have started to believe in online trainings which leads to a hybrid experience. Online trainings take the best part of the books and the best part of the instructor-led training and gives effective training in a matter of hours. Developer Training – A Conclusive Summary- Part 5 In this part, I shared what I was continuously thinking about developer training. There is no better teacher than oneself. There is no better motivation than a personal desire to learn new technology. Honestly there is nothing more personal learning. That “change is the only constant” and “adapt & overcome” are the essential lessons of life. One cannot stop the learning and resist the change. In the IT industry “ego of knowing all” and the “resistance to change” are the most challenging issues. Once someone overcomes them, life is much easier. I believe that proper and appropriate high quality training can help to address the burning issues. Opinion of Friends I invited a few of my friends to express their opinion about developer training and here are their opinions. I am listing them here in the order of the blog post publishing date. Nakul Vachhrajani - Developer Trainings-Importance, Benefits, Tips and follow-up Nakul’s sums of many of the concepts which are complementary to my blog posts. Nakul addresses the burning question of developer training with different angles. I am personally very impressed by his following statement - “Being skilled does not mean having just a stack of certifications, but it also means having an understanding about the internals of the products that you are working on – and using that knowledge to improve the efficiency & productivity at the workplace in turn resulting in better products, better consulting abilities and a happier self.” Nakul also suggests the online training options of Pluralsight. Vinod Kumar - Training–a necessity or bonus Vinod Kumar comes up with excellent follow up on developer training. Vinod is known for his inspirational writing about SQL Server. Vinod starts with a story of a student who is extremely eager to learn the wisdom of life from a monk but the monk does not accept him as a disciple for a long time. The conversation between student and monk is indeed an essence of all learning. We all want to learn quickly and be successful but the most important thing in life is to have the right attitude towards learning and more so towards life. The blog post end with a very important thought about how to avoid the famous excuse – “I don’t have enough time.” Ritesh Shah - Training – useful or useless? Ritesh brings up very important concept related to training. Ritesh in his meticulous style explains why training is an important and lifelong process. Training must not stop at any age but should continue forever. The moment training stops, progress stops along with. Paras Doshi - Professional Development Resource Paras is known for his to–the-point writing, and has summarized the five part series very precisely. He read the five part series and created a digest summary of the blog post. If you are in a rush and have no time to read my five series – I suggest you read his blog post. Training Resources I am often asked what the best resources for learning new technology are. This is the most difficult question EVER. There are plenty of good training resources available. When it is about training our needs are different, our preference of learning is different and we all have an opinion. Additionally, we all are located in different geographic locations worldwide and there is no way one solution will fit all. However, let me list a few of the training resources which I have built so far and you can consume them if you find it relevant to your need. SQL Server Books SQL Server Interview Questions and Answers SQL Wait Stats SQL Programming Joes 2 Pros SQL Server Video Tutorials SQL Server Questions and Answers SQL Server Performance: Indexing Basics SQL Server Performance: Introduction to Query Tuning SQL in Sixty Seconds Series of Sixty Seconds Learning Video on YouTube Trust me worldwide web is very big and there are plenty of high quality learning materials available worldwide – trainer-led as well online. I suggest you explore various options and make the best choice for yourself. Remember, training is your personal journey and it should never stop. Are you ready? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Developer Training, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Tools to Help Post Content On Your WordPress Blog

    - by Matthew Guay
    Now that you’ve got a nice blog, you want to do more with it and start posting content.  Here we look at some tools that will allow you to post directly to your WordPress blog. Writing a new blog post is easy with WordPress as we saw in our previous post about Starting your own WordPress blog.  The web editor gives you a lot of features and even lets you edit your post’s source code if you enjoy hacking HTML.  There are other tools that will allow you to post content, here we look at how you can post with dedicated apps, browser plugins, and even by email. Windows Live Writer Windows Live Writer (part of the Windows Live Essentials Suite) is a great app for posting content to your blog.  This free program for Microsoft lets you post content to a variety of blogging services, including Blogger, Typepad, LiveJournal, and of course WordPress.  You can write blog posts directly from its Word-like editor, complete with pictures and advanced formatting.  Even if you’re offline, you can still write posts and save them for when you’re online again. For more information about installing Live writer, check out our article on how to Install Windows Live Essentials In Windows 7. Once Live Writer is installed, open it to add your blog.  If you already had Live Writer installed and configured for a blog, you can add your new blog, too.  Just click your blog’s name in the top right corner, and select “Add blog account”. Select “Other blog service” to add your WordPress blog to Writer, and click Next.   Enter your blog’s web address, and your username and password.  Check Remember my password so you don’t have to enter it every time you write something. Writer will analyze your blog and setup your account. During the setup process it may ask to post a temporary post.  This will let you preview blog posts using your blog’s real theme, which is helpful, so click Yes. Finally, add your Blog’s name, and click Finish. You can now use the rich editor to write and add content to a new blog post.   Select the Preview tab to see how your post will look on your blog… Or, if you’re a HTML geek, select the Source tab to edit the code of your blog post. From the bottom of the window, you can choose categories, insert tags, and even schedule the post to publish on a different day.  Live Writer is fully integrated with WordPress; you’re not missing anything by using the desktop editor. If you want to edit a post you’ve already published, click the Open button and select the post.  You can chose and edit any post, including ones you published via the web interface or other editors. Add Multimedia Content to your Posts with Live Writer Back in the Edit tab, you can add pictures, videos and more from the sidebar.  Select what you want to insert. Pictures If you insert a picture, you can add many nice borders and designs to it. Or, you can even add artistic effects from the Effects tab in the sidebar. Photo Gallery If you want to post several pictures, say some of your vacation shots, then inserting a picture gallery may be the best option.  Select Insert Photo Gallery in the sidebar, and then choose the pictures you want in the gallery. Once the gallery is inserted, you can choose from several styles to showcase your pictures. When you post the blog, you will be asked to sign in with your Windows Live ID as the gallery pictures will be stored in the free Skydrive storage service. Your blog readers can see the preview of your pictures directly on your blog, and then can view each individual picture, download them, or see a slideshow online via the link. Video If you want to add a video to your blog post, select Video from the sidebar as above.  You can select a video that’s already online, or you can choose a new video from file and upload it via YouTube directly from Windows Live Writer.   Note that you will have to sign in with your YouTube account to upload videos to YouTube, so if you’re not logged in you’ll be prompted to do so when you click Insert. Geek Tip:  If you ever want to copy your Live Writer settings to another computer, check out our article on how to Backup Your Windows Live Writer Settings. Microsoft Office Word Word 2007 and 2010 also let you post content directly to your blog.  This is especially nice if you’ve already typed up a document and think it would be good on your Blog as well.  Check out our in-depth tutorial on posting blog posts via Word 2007 using Word 2007 as a blogging tool. This works in Word 2010 too, except the Office Orb has been replaced by the new Backstage view.  So, in Word 2010, to start a new blog post, click File \ New then select Blog post.  Proceed as you would in Word 2007 to add your blog settings and post the content you want. Or, if you’ve already written a document and want to post it, select File \ Share (or Save and Send in the final version of Word 2010), and then click Publish as Blog Post.  If you haven’t setup your blog account yet, set it up as shown in the Word 2007 article. Post Via Email Most of us use email daily, and already have our favorite email app or service.  Whether on your desktop or mobile phone, it’s easy to create rich emails and add content.  WordPress lets you generate a unique email address that you can use to easily post content and email to your blog.  Just compose your email with the subject as the title of your post, and send it to this unique address.  Your new post will be up in minutes. To active this feature, click the My Account button in the top menu bar in your WordPress.com account, and select My Blogs. Click the Enable button under Post by Email beside your blog’s name.   Now you’ll have a private email you can use to post to your blog.  Anything you send to this email will be posted as a new post.  If you think your email may be compromised, click Regenerate to get a new publishing email address. Any email program or webapp now is a blog post editor.  Feel free to use rich formatting or insert pictures; it all comes through great.  This is also a great way to post to your blog from your mobile device.  Whether you’re using webmail or a dedicated email client on your phone, you can now blog from anywhere.   Mobile Applications WordPress also offer dedicated applications for blogging directly from your mobile device.  You can write new posts, edit existing ones, and manage comments all from your Smartphone.  Currently they offer apps for iPhone, Android, and Blackberry.  Check them out at the link below. Conclusion Whether you want to write from your browser or email a post to your blog, WordPress is flexible enough to work right along with your preferences.  However you post, you can be sure that it will look professional and be easily accessible with your WordPress blog. Download Windows Live Writer Download WordPress apps for your mobile device Similar Articles Productive Geek Tips Quick Tip: Set a Future Date for a Post in WordPressAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogFuture Date a Post in Windows Live WriterHow To Start Your Own Professional Blog with WordPressUsing Word 2007 as a Blogging Tool TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Improving the Industry’s Best Cloud Project Portfolio Management (PPM) Solution – New Release of Instantis EnterpriseTrack

    - by Melissa Centurio Lopes
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Yasser Mahmud, Vice President of Product Strategy & Industry Marketing, Oracle Primavera We know that in today’s rapidly changing world, organizations and leaders must adapt to fierce competition, business climate change and customers consistently demanding more for less. And project portfolio management (PPM) initiatives are a key component to help organizations thrive and stand out among competitors. That’s why I’m excited to announce Instantis EnterpriseTrack 8.5. Since Oracle’s acquisition of Instantis late last year, we’ve been busy working to enhance the leading cloud PPM solution. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Here’s what’s new: Perform more precise resource planning and management  Gain more precise capacity visibility for resource planning and project execution with resource calendars that capture vacation, LOA and part-time resource availability Ensure compliance and governance processes  with activity labor cost capitalization Improve project labor cost estimation, tracking and administration with variable resource rates Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Optimize Project Demand Management And Execution Enhance productivity and analysis with project request flexible staffing plan and simplified finance estimation Improve project status communication and execution with estimated time to complete (ETC) in timesheets and projects Achieve audit compliance and governance with field change history for key project and project request fields Enforce proper financial accounting processes with the new strict finance lock/close period option Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Improve Reporting and the User Experience Enhance user productivity and analysis with improved listing pages Improve program reporting with new program filters in listing pages and reports Run large data volume user defined Excel reports with MS Excel 2010 support Accelerate user productivity and satisfaction with an improved user interface for project issues, risks, and scope changes Enjoy faster system response and improved user experience with  optimized listing pages, resource planning, and application cache Deliver user self-service training on demand with UPK support And if that wasn’t enough, we’ve also made additional improvements to timesheets, field change history and finance lock/close period. Learn more about Instantis EnterpriseTrack 8.5.

    Read the article

  • Too Many Kittens To Juggle At Once

    - by Bil Simser
    Ahh, the Internet. That crazy, mixed up place where one tweet turns into a conversation between dozens of people and spawns a blogpost. This is the direct result of such an event this morning. It started innocently enough, with this: Then followed up by a blog post by Joel here. In the post, Joel introduces us to the term Business Solutions Architect with mad skillz like InfoPath, Access Services, Excel Services, building Workflows, and SSRS report creation, all while meeting the business needs of users in a SharePoint environment. I somewhat disagreed with Joel that this really wasn’t a new role (at least IMHO) and that a good Architect or BA should really be doing this job. As Joel pointed out when you’re building a SharePoint team this kind of role is often overlooked. Engineers might be able to build workflows but is the right workflow for the right problem? Michael Pisarek wrote about a SharePoint Business Architect a few months ago and it’s a pretty solid assessment. Again, I argue you really shouldn’t be looking for roles that don’t exist and I don’t suggest anyone create roles to hire people to fill them. That’s basically creating a solution looking for problems. Michael’s article does have some great points if you’re lost in the quagmire of SharePoint duties though (and I especially like John Ross’ quote “The coolest shit is worthless if it doesn’t meet business needs”). SharePoinTony summed it up nicely with “SharePoint Solutions knowledge is both lacking and underrated in most environments. Roles help”. Having someone on the team who can dance between a business user and a coder can be difficult. Remember the idea of telling something to someone and them passing it on to the next person. By the time the story comes round the circle it’s a shadow of it’s former self with little resemblance to the original tale. This is very much business requirements as they’re told by the user to a business analyst, written down on paper, read by an architect, tuned into a solution plan, and implemented by a developer. Transformations between what was said, what was heard, what was written down, and what was developed can be distant cousins. Not everyone has the skill of communication and even less have negotiation skills to suit the SharePoint platform. Negotiation is important because not everything can be (or should be) done in SharePoint. Sometimes it’s just not appropriate to build it on the SharePoint platform but someone needs to know enough about the platform and what limitations it might have, then communicate that (and/or negotiate) with a customer or user so it’s not about “You can’t have this” to “Let’s try it this way”. Visualize the possible instead of denying the impossible. So what is the right SharePoint team? My cromag brain came with a fairly simpleton answer (and I’m sure people will just say this is a cop-out). The perfect SharePoint team is just enough people to do the job that know the technology and business problem they’re solving. Bridge the gap between business need and technology platform and you have an architect. Communicate the needs of the business effectively so the entire team understands it and you have a business analyst. Can you get this with full time workers? Maybe but don’t expect miracles out of the gate. Also don’t take a consultant’s word as gospel. Some consultants just don’t have the diversity of the SharePoint platform to be worth their value so be careful. You really need someone who knows enough about SharePoint to be able to validate a consultants knowledge level. This is basically try for any consultant, not just a SharePoint one. Specialization is good and needed. A good, well-balanced SharePoint team is one of people that can solve problems with work with the technology, not against it. Having a top developer is great, but don’t rely on them to solve world hunger if they can’t communicate very well with users. An expert business analyst might be great at gathering requirements so the entire team can understand them, but if it means building 100% custom solutions because they don’t fit inside the SharePoint boundaries isn’t of much value. Just repeat. There is no silver bullet. There is no silver bullet. There is no silver bullet. A few people pointed out Nick Inglis’ article Excluding The Information Professional In SharePoint. It’s a good read too and hits home that maybe some developers and IT pros need some extra help in the information space. If you’re in an organization that needs labels on people, come up with something everyone understands and go with it. If that’s Business Solutions Architect, SharePoint Advisor, or Guy Who Knows A Lot About Portals, make it work for you. We all wish that one person could master all that is SharePoint but we also know that doesn’t scale very well and you quickly get into the hit-by-a-bus syndrome (with the organization coming to a full crawl when the guy or girl goes on vacation, gets sick, or pops out a baby). There are too many gaps in SharePoint knowledge to have any one person know it all and too many kittens to juggle all at once. We like to consider ourselves experts in our field, but trying to tackle too many roles at once and we end up being mediocre jack of all trades, master of none. Don't fall into this pit. It's a deep, dark hole you don't want to try to claw your way out of. Trust me. Been there. Done that. Got the t-shirt. In the end I don’t disagree with Joel. SharePoint is a beast and not something that should be taken on by newbies. If you just read “Teach Yourself SharePoint in 24 Hours” and want to go build your corporate intranet or the next killer business solution with all your new found knowledge plan to pony up consultant dollars a few months later when everything goes to Hell in a handbasket and falls over. I’m not saying don’t build solutions in SharePoint. I’m just saying that building effective ones takes skill like any craft and not something you can just cobble together with a little bit of cursory knowledge. Thanks to *everyone* who participated in this tweet rush. It was fun and educational.

    Read the article

  • How to deal with a poor team leader and a tester manager from hell? [closed]

    - by Google
    Let me begin by explaining my situation and give a little context to the situation. My company has around 15 developers but we're split up on two different areas. We have a fresh product team and the old product team. The old product team does mostly bug fixes/maintenance and a feature here and there. The fresh product had never been released and was new from the ground up. I am on the fresh product team. The team consists of three developers (myself, another developer and a senior developer). The senior is also our team leader. Our roles are as follows: Myself: building the administration client as well as build/release stuff Other dev: building the primary client Team lead: building the server In addition to the dev team, we interact with the test manager often. By "we" I mean me since I do the build stuff and give him the builds to test. Trial 1: The other developer on my team and I have both tried to talk to our manager about our team leader. About two weeks before release we went in his office and had a closed door meeting before our team lead got to work. We expressed our concerns about the product, its release date and our team leader. We expressed our team leader had a "rosey" image of the product's state. Our manager seemed to listen to what we said and thanked us for taking the initiative to speak with him about it. He got us an extra two weeks before release. The situation with the leader didn't change. In fact, it got a little worse. While we were using the two weeks to fix issues he was slacking off quite a bit. Just to name a few things, he installed Windows 8 on his dev machine during this time (claimed him machine was broke), he wrote a plugin for our office messenger that turned turned messages into speech, and one time when I went in his office he was making a 3D model in Blender (for "fun"). He felt the product was "pretty good" and ready for release. During this time I dealt with the test manager on a daily basis. Every bug or issue that popped up he would pretty much attack me personally (regardless of which component the bug was in). The test manager would often push his "views" of what needed to be done with the product. He virtually ordered me to change text on our installer and to add features to the installer and administration client. I tried to express how his suggestions were "valid ideas" but it was too close to release to do those kinds of things and to make matters worse, our technical writer had already finished documentation and such a change would not only affect the dev team but would affect the technical writer and marketing as well. I expressed I wasn't going to make those changes without marketing's consent as well as the technical writer and my manager's. He pretty much said I don't care about the product and said I don't do my job. I would like to take a moment to say I take my job seriously and I do my best. I am the kind of person that goes to work 30-40 mins early and usually leaves 30 minutes later than everyone else. Saying I don't care or do my job is just insulting. His "attacks" on me grew from day to day. Every bug that popped up he would usually comment on in some manner that jabbed me and the other developer. "Oh that bug! Yeah that should have been fixed by now, figures! If someone would do their job!" and other similar kinds of comments. Keep in mind 8 out of 10 bugs were in the server and had nothing to do with me and the other developer. That didn't seem to matter.. On one occasion they got pretty bad and we almost got into a yelling match so I decided to stop talking to him all together. I carried all communication through office email (with my manager cc'd). He never attacked me via email. He still attempted to get aggressive with me in person but I completely ignore him and my only response to any question is, "Ask my team leader." or "Ask a product manager." The product launched after our two week extension. Trial 2: The day after the product launch our team leader went on vacation (thanks....). At this time we got a lot of questions from the tech support... major issues with the product. All of these issues were bugs marked "resolved" by our lovely team leader (a typical situation that often popped up). This is where we currently are. The other developer has been with the company for about three years (I've been there only five months) and told me he was going to speak with our manager alone and hoped it would help get our concerns across a little better in a one-on-one. He spoke with the manager and directly addressed all of our concerns regarding our team leader and the test manager giving us (mostly me) hell. Our manager basically said he understood how hard we work and said he noticed it and there's no doubt about it. He said he spoke with the test manager about his temper. Regarding the team leader, he didn't say a whole lot. He suggested we sit down with the team leader and address our concerns (isn't that the manager's job?). We're still waiting to see if anything has changed but we doubt it. What can we do next? 1) Talk to the team leader (may stress relationship and make work awkward) I admit the team leader is generally a nice guy. He is just a horrible leader and working closely with him is painful. I still don't believe bringing this directly to the team leader would help at all and may negatively impact the situation. 2) I could quit. Other than this situation the job is pretty fantastic. I really like my other coworkers and we have quite a bit of freedom. 3) I could take the situation with the team leader to one of the owners. I would then be throwing my manager under the bus. 4) I could take the situation with the test manager to HR. Any suggestions? Comments?

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #052

    - by Pinal Dave
    Let us continue with the final episode of the Memory Lane Series. Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Set Server Level FILLFACTOR Using T-SQL Script Specifies a percentage that indicates how full the Database Engine should make the leaf level of each index page during index creation or alteration. fillfactor must be an integer value from 1 to 100. The default is 0. Limitation of Online Index Rebuld Operation Online operation means when online operations are happening in the database are in normal operational condition, the processes which are participating in online operations does not require exclusive access to the database. Get Permissions of My Username / Userlogin on Server / Database A few days ago, I was invited to one of the largest database company. I was asked to review database schema and propose changes to it. There was special username or user logic was created for me, so I can review their database. I was very much interested to know what kind of permissions I was assigned per server level and database level. I did not feel like asking Sr. DBA the question about permissions. Simple Example of WHILE Loop With CONTINUE and BREAK Keywords This question is one of those questions which is very simple and most of the users get it correct, however few users find it confusing for the first time. I have tried to explain the usage of simple WHILE loop in the first example. BREAK keyword will exit the stop the while loop and control is moved to the next statement after the while loop. CONTINUE keyword skips all the statement after its execution and control is sent to the first statement of while loop. Forced Parameterization and Simple Parameterization – T-SQL and SSMS When the PARAMETERIZATION option is set to FORCED, any literal value that appears in a SELECT, INSERT, UPDATE or DELETE statement is converted to a parameter during query compilation. When the PARAMETERIZATION database option is SET to SIMPLE, the SQL Server query optimizer may choose to parameterize the queries. 2008 Transaction and Local Variables – Swap Variables – Update All At Once Concept Summary : Transaction have no effect over memory variables. When UPDATE statement is applied over any table (physical or memory) all the updates are applied at one time together when the statement is committed. First of all I suggest that you read the article listed above about the effect of transaction on local variant. As seen there local variables are independent of any transaction effect. Simulate INNER JOIN using LEFT JOIN statement – Performance Analysis Just a day ago, while I was working with JOINs I find one interesting observation, which has prompted me to create following example. Before we continue further let me make very clear that INNER JOIN should be used where it cannot be used and simulating INNER JOIN using any other JOINs will degrade the performance. If there are scopes to convert any OUTER JOIN to INNER JOIN it should be done with priority. 2009 Introduction to Business Intelligence – Important Terms & Definitions Business intelligence (BI) is a broad category of application programs and technologies for gathering, storing, analyzing, and providing access to data from various data sources, thus providing enterprise users with reliable and timely information and analysis for improved decision making. Difference Between Candidate Keys and Primary Key Candidate Key – A Candidate Key can be any column or a combination of columns that can qualify as unique key in database. There can be multiple Candidate Keys in one table. Each Candidate Key can qualify as Primary Key. Primary Key – A Primary Key is a column or a combination of columns that uniquely identify a record. Only one Candidate Key can be Primary Key. 2010 Taking Multiple Backup of Database in Single Command – Mirrored Database Backup I recently had a very interesting experience. In one of my recent consultancy works, I was told by our client that they are going to take the backup of the database and will also a copy of it at the same time. I expressed that it was surely possible if they were going to use a mirror command. In addition, they told me that whenever they take two copies of the database, the size of the database, is always reduced. Now this was something not clear to me, I said it was not possible and so I asked them to show me the script. Corrupted Backup File and Unsuccessful Restore The CTO, who was also present at the location, got very upset with this situation. He then asked when the last successful restore test was done. As expected, the answer was NEVER.There were no successful restore tests done before. During that time, I was present and I could clearly see the stress, confusion, carelessness and anger around me. I did not appreciate the feeling and I was pretty sure that no one in there wanted the atmosphere like me. 2011 TRACEWRITE – Wait Type – Wait Related to Buffer and Resolution SQL Trace is a SQL Server database engine technology which monitors specific events generated when various actions occur in the database engine. When any event is fired it goes through various stages as well various routes. One of the routes is Trace I/O Provider, which sends data to its final destination either as a file or rowset. DATEDIFF – Accuracy of Various Dateparts If you want to have accuracy in seconds, you need to use a different approach. In the first example, the accurate method is to find the number of seconds first and then divide it by 60 to convert it in minutes. Dedicated Access Control for SQL Server Express Edition http://www.youtube.com/watch?v=1k00z82u4OI Book Signing at SQLPASS 2012 Who I Am And How I Got Here – True Story as Blog Post If there was a shortcut to success – I want to know. I learnt SQL Server hard way and I am still learning. There are so many things, I have to learn. There is not enough time to learn everything which we want to learn. I am constantly working on it every day. I welcome you to join my journey as well. Please join me in my journey to learn SQL Server – more the merrier. Vacation, Travel and Study – A New Concept Even those who have advanced degrees and went to college for years, or even decades, find studying hard.  There is a difference between studying for a career and studying for a certification.  At least to get a degree there is a variety of subjects, with labs, exams, and practice problems to make things more interesting. Order By Numeric Values Formatted as String We have a table which has a column containing alphanumeric data. The data always has first as an integer and later part as a string. The business need is to order the data based on the first part of the alphanumeric data which is an integer. Now the problem is that no matter how we use ORDER BY the result is not produced as expected. Let us understand this with an example. Resolving SQL Server Connection Errors – SQL in Sixty Seconds #030 – Video One of the most famous errors related to SQL Server is about connecting to SQL Server itself. Here is how it goes, most of the time developers have worked with SQL Server and knows pretty much every error which they face during development language. However, hardly they install fresh SQL Server. As the installation of the SQL Server is a rare occasion unless you are a DBA who is responsible for such an instance – the error faced during installations are pretty rare as well. http://www.youtube.com/watch?v=1k00z82u4OI Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • I Know What I Did This Summer: Put Down Trex Decking

    - by thatjeffsmith
    If you’re wondering why I would bore everyone with my pictures and frequent status updates/tweets from the past week – it’s so I could document the process of refurbishing my deck, or what some would call a porch. When we go to take a vacation, buy a car, do anything – we also read personal blogs to get the real story. So, if you’re curious about what it takes to tackle this sort of project, read on. Skills/Equipment/Manpower We Possessed I took the old decking out by myself. I’m about 230 lbs, more than 6′ tall, and I’m pretty healthy. This took about 8 hours over two afternoons. Three of us put the deck back together. My wife has two engineering degrees. Her father also has two engineering degrees. Lots of brainpower available here. Also, her dad ran the public works department for a country for more than 20 years – so lots and lots of practical experience on hand. We had a compound mitre saw, a skilsaw, 2-3 crowbars, a framing hammer, 3 cordless drills, a corded drill, lots of sawhorses, a power sander, an angle grinder, a 10×10 Coleman canopy tent, a Ford F-150 pickup truck, outdoor speakers and lots of iTunes playlists, plenty of water and cold beer. Why We Did This Our deck was relatively young – it was built in 2005. However, the pressure treated boards must not have been adequately maintained before we bought the house. I had powerwashed the deck every other year and had it stained a few times. The boards just rotted. We’re going to be in the house for a long time, and we wanted something that would look nice and require little maintenance. More bad deck boards The deck boards were in bad shape Things We Learned The two most important things: The hidden fasteners have to be put in JUST right. Wedge them into the grooved board, then bend down the bit that is screwed down. We didn’t do this on the first board and couldn’t get the second board to fit nearly close enough. Watching the official TREX YouTube video helped immensely, and we should have watched that first. When pre-drilling holes for the boards that need screwed down – DO NOT pre-drill through the underlying framing wood. ONLY pre-drill through the TREX itself. The screw won’t seat in the board properly. Instead of sitting down flush with the board, it will stop at the top of the board and just spin. I had to call the the place that sold me the screws to find this out. So about a third of our screws look like crap. If it doesn’t look or feel right – stop everything and pick up your computer or your phone. It’s not right, and it will be much easier to stop and find out why. We didn’t do this, and now I’m going to see every screw that’s not flush with the boards and get upset. Oh well. The Process How much time did it take? Well I spent about 8 hours taking the deck apart. And then the 3 of use spent 8 hours the first day, 10 hours the second day, 8 hours the third, and another 6 hours on the fourth day. That’s like 104 man-hours. We supposedly saved four or five thousand dollars in labor, but don’t do the math here or you might get a bit upset. The main thing is that we got what we wanted, and there won’t be any surprises later. Now for some pictures… This 6”+ pry bar made the destruction of the old deck much easier Most of the joists, once exposed, were OK. This joist wasn’t sitting on ANYTHING before. We think a lazy gas person cut the board to sneak a gas line in. Awesome… These monster lag bolts had to be accounted for when putting in the additional framing The border pattern Sheri wanted to put in required a lot more framing. These were the first boards to go down – we screwed them in as there was no way to attach clips I sat, kicked in the boards, and then drilled these clips in – but my wife was able to go MUCH faster by using her hands to lock the boards in and drill on her knees. I liked locking the board in with my feet when they needed to be ‘encouraged’ to go straight. The first board took FOREVER to go in, but then when we got rolling, we were able to put in a 20′ board in less than 10 minutes. This was end of construction day #2 – we got much further than we thought we would. Ah, the dreaded last 10% – what to do here? Remember those ‘floating’ stringers? Yeah, we fixed that up a bit, too. My wife used a website (and her brain) to calculate exactly how to cut the stringers to give us the rise/run we needed with the proper clearance and all that jazz. The stairs with stringers and toe kicks – this was worth the effort It started raining on us as I screwed down the steps – this we managed to get our shade tent up on the deck to protect us from the rain too The stairs, finished Finished, mostly Good corner shot The top of the stairs Stairs, looking down Celebratory beer In Summary There are a few things we’re not happy with. I think we can fix them up – but later. I have a few things left to finish, rewire the lighting, get the gas grille put back in, and rehang some screen doors. I was expecting this to be a lot worse than it was. If I didn’t have the help, I would have never done it myself. But I’m glad that I did have that help and did do that project. It’s not often you get to spend that kind of qualify time with family and building cool stuff.

    Read the article

  • PASS: SQLRally Thoughts

    - by Bill Graziano
    The PASS Board recently decided that we wouldn’t put another US-based SQLRally on the calendar until we had a chance to review the program. I wanted to provide some of my thinking around this. Keep in mind that this is the opinion of one Board member. The Board committed to complete two SQLRally events to determine if an event modeled between SQL Saturday and the Summit was viable. We’ve completed the two events and now it’s time to step back and review the program. This is my seventh year on the PASS Board. Over that time people have asked me why PASS does certain things. Many, many times my answer has been “Because that’s the way we did it last year”. And I am tired of giving that answer. We need to take a step back and review the US-based SQLRally before we schedule another one. It would be irresponsible for me as a Board member to commit resources to this without validating that what we’re doing makes sense for the organization and our members. I have no doubt that this was a great event for the attendees. We just need to validate it’s the best use of our resources. Please keep in mind that we haven’t cancelled the event. We’ve just said we need to review it before scheduling another one. My opinion is that some fairly serious changes are needed to the model before we consider it again – IF we do it again. I’ve come to that conclusion after speaking with the Dallas organizers, our HQ team, our Marketing team, other Board members (including one of the Orlando organizers), attendees in Orlando and Dallas and visiting other similar events. I should point out that their views aren’t unanimous on nearly any part of this event -- which is one of the reasons I want to take some time and think about this before continuing. I think it’s helpful to look at the original goals of what we were trying to accomplish. Andy Warren wrote these up in August of 2010. My summary of these goals and some thoughts on each one is below. Many of these thoughts revolve around the growth of SQL Saturdays. In the two years since that document was written these events have grown significantly. The largest SQL Saturdays are now over 500 people which mean they are nearly the same size as our recent SQLRally. Our goals included: Geographic diversity. We wanted an event in an area of the country that was away from any given Summit location. I think that’s still a valid goal. But we also have SQL Saturdays all over the country. What does SQLRally bring to this that SQLSaturday doesn’t? Speaker growth. One of the stated goals was to build a “farm club” for speakers. This gives us a way for speakers to work up to speaking at Summit by speaking in front of larger crowds. What does SQLRally bring to this that the larger SQL Saturdays aren’t providing? Pre-Conference speakers is one obvious answer here. Lower price. On a per-day basis, SQLRally is roughly 1/4th the price of the Summit. We wanted a way for people to experience something Summit-like at a lower price point. The challenge is that we are very budget constrained at that lower price point. International Event Model.  (I need to write more about this but I’m out of time.  I’ll cover it in the next installment.) There are a number of things I really like about SQLRally. I love the smaller conferences. They give me a chance to meet more people than at something the size of Summit. I like the two day format. That gives you two evenings to be at social events with people. Seeing someone a second day is a great way to build a bond with that person. That’s more difficult to do at a SQL Saturday. We also need to talk about the financial aspects of the event. Last year generated a small $17,000 profit on revenues of $200,000. Percentage-wise that’s reasonable but on an absolute basis it’s not a huge amount in our budget. We think this year will lose between $30,000 and $50,000 and take roughly 1,000 hours of HQ time. We don’t have detailed financials back yet but that’s our best guess at this point. Part of that was driven by using a convention center instead of a hotel. Until we get detailed financials back we won’t have the full picture around the financial impact. This event also takes time and mindshare from our Marketing team. This may sound like a small thing but please don’t underestimate it. Our original vision for this was something that would take very little time from our Marketing team and just a few mentions in the Connector. It turned out to need more than that. And all those mentions and emails take up space we could use to talk about other events and other programs. Last I wanted to talk about some of the things I’m thinking about. I don’t think it’s as simple as saying if we just fix “X” it all gets better. Is this that much better of an event than SQL Saturdays? What if we gave a few SQL Saturdays some extra resources? When SQL Saturdays were around 250 people that wasn’t as viable. With some of those events over 500 we need to reconsider this. We need to get back to a hotel venue. That will help with cost and networking. Is this the best use of the 1,000 HQ hours that we invested in the event? Is our price-point correct? I’m leaning toward raising our price closer to Summit on a per-day basis. I think this will let us put on a higher quality event and alleviate much of the budget pressure. Should growing speakers be a focus? Having top-line pre-conference speakers helps market the event. It will also have an impact on pricing and overall profit. We should also ask if it actually does grow speakers. How many of these people will eventually register for Summit? Attend chapters? Is SQLRally a driver into PASS or is it something that chapters, etc. drive people to? Should we have one paid day and one free instead of two paid days? This is a very interesting model that is used by SQLBits in the UK. This gives you the two day aspect as well as offering options for paid and free attendees. I’m very intrigued by this. Should we focus on a topic? Buried in the minutes is a discussion of whether PASS should have a Business Analytics conference separate from Summit. This is an interesting question to consider. Would making SQLRally be focused on a particular topic make it more attractive? Would that even be a SQLRally? Can PASS effectively manage the two events? (FYI - Probably not.) Would it help differentiate it from Summit and SQL Saturday? These are all questions that I think should be asked and answered before we do this event again. And we can’t do that if we don’t take time to have the discussion. I wanted to get this published before I take off for a few days of vacation. When I get back I’d like to write more about why the international events are different and talk about where we go from here.

    Read the article

  • Problem upgrading kernel on debian 3.1

    - by exhuma
    Hi, I have a quite old box in a remote server farm. So I have no direct access. Only remote SSH (and via SSH to a serial console). I haven't updated this box in ages. Now, whenever I want to install a new package, a dependency to glibc appears. Unfortunately, the install of glibc depends on a 2.6 kernel and I am running a venerable 2.4 kernel (one more reason to upgrade). The problem is, that the install of a new kernel has an indirect (over locales) dependency to glibc. So, to install glibc, I need a new kernel. For a new kernel, I need to upgrade glibc. Essentially I am blocked. What's the best way to proceed considering I have no "hardware" access? Here's a quick transcript of the upgrade process: [green:~]% sudo aptitude install linux-image-686 Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done The following packages are unused and will be REMOVED: gcc-4.3-base The following NEW packages will be automatically installed: dash libc6-i686 libparse-recdescent-perl linux-image-2.6-686 linux-image-2.6.18-6-686 module-init-tools yaird The following packages have been kept back: adduser apache2 apache2-mpm-prefork apache2-utils apache2.2-common apt apt-utils aptitude autoconf autotools-dev awstats base-files base-passwd [...snip...] util-linux vacation vim vim-common wamerican wbritish wget whiptail whois wwwconfig-common zlib1g The following NEW packages will be installed: dash libc6-i686 libparse-recdescent-perl linux-image-2.6-686 linux-image-2.6.18-6-686 linux-image-686 module-init-tools yaird The following packages will be upgraded: hotplug libc6 2 packages upgraded, 8 newly installed, 1 to remove and 277 not upgraded. Need to get 0B/22.7MB of archives. After unpacking 52.1MB will be used. Do you want to continue? [Y/n/?] Writing extended state information... Done Preconfiguring packages ... (Reading database ... 34065 files and directories currently installed.) Preparing to replace libc6 2.3.6.ds1-13 (using .../libc6_2.7-18lenny2_i386.deb) ... Checking for services that may need to be restarted... Checking init scripts... WARNING: init script for postgresql not found. [ --- libc6 config screen appears here --- ] WARNING: POSIX threads library NPTL requires kernel version 2.6.8 or later. If you use a kernel 2.4, please upgrade it before installing glibc. The installation of a 2.6 kernel _could_ ask you to install a new libc first, this is NOT a bug, and should *NOT* be reported. In that case, please add etch sources to your /etc/apt/sources.list and run: apt-get install -t etch linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.7-18lenny2_i386.deb (--unpack): subprocess pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/libc6_2.7-18lenny2_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Ack! Something bad happened while installing packages. Trying to recover: dpkg: dependency problems prevent configuration of locales: locales depends on glibc-2.7-1; however: Package glibc-2.7-1 is not installed. dpkg: error processing locales (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: locales Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done Now, if I follow the instrunctions as promted I get the following. Note that I am using aptitude instead of apt-get to benefit from the better dependency tracking. I did try with apt-get first. But that let me to the same problem. [green:~]% sudo aptitude install -t etch linux-image-2.6.26-2-686 Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done E: Unable to correct problems, you have held broken packages. E: Unable to correct dependencies, some packages cannot be installed E: Unable to resolve some dependencies! Some packages had unmet dependencies. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following packages have unmet dependencies: linux-image-2.6.26-2-686: Depends: initramfs-tools (>= 0.55) but it is not installable or yaird (>= 0.0.13) but it is not installable or linux-initramfs-tool which is a virtual package. Any ideas?

    Read the article

  • jQuery hide/show with select tag

    - by Ozzy
    I'm relative new to jQuery and I've been asked to create a hide/show function with a select tag. The function pretty much would be when you click on one of the options in the select tag it will open a div associate with the div of course. To be honest I have no idea how approach this function. I need help urgently, I have already tried many online but none have seem to work. Find below the html code. Thanks. <div class="adwizard"> <select id="selectdrop" name="selectdrop" class="adwizard-bullet"> <option value="adwizard">AdWizard</option> <option value="collateral">Collateral Ordering Tool</option> <option value="ebrochure">eBrochures</option> <option value="brand">Brand Center</option> <option value="funtees">FunTees</option> </select> </div> <div class="panels"> <div id="adwizard" class="sub-box showhide"> <img src="../images/bookccl/img-adwizard.gif" width="95" height="24" alt="AdWizard" /> <p>Let Carnival help you grow your business with our great tools! Lor ipsum dolor sit amet. <a href="https://www.carnivaladwizard.com/home.asp">Learn More</a></p> </div> <div id="collateral" class="sub-box showhide"> <p>The Collateral Ordering Tool makes it easy for you to order destination brochures and the sales DVD for that upcoming event. <a href="http://carnival.litorders.com/workplace.asp">Learn More</a></p> </div> <div id="ebrochure" class="sub-box showhide"> <img src="../images/bookccl/img-ebrochure.gif" width="164" height="39" alt="Brochures" /> <p>Show your clients that you're listening to their specific vacation needs by delivering relevant planning info quickly. <a href="http://productiontrade.carnivalbrochures.com/start.aspx">Learn More</a></p> </div> <div id="brand" class="sub-box showhide"> <p>Carnival Brand Center is where you'll find information on our strategy, guidlines, templates and artwork. <a href="https://carnival.monigle2.net/user_info.asp?login_type=agent">Learn More</a></p> </div> <div id="funtees" class="sub-box showhide"> <img src="../images/bookccl/img-funtees.gif" width="164" height="39" alt="Funtees" /> <p>Create your very own Fun Design shirts to commemorate that special occasion aboard a Carnival "Fun Ship!" <a href="http://carnival.victorydyo.com/">Learn More</a></p> </div> </div><!-- ends .panel --> <a class="view" href="#">See All Marketing Tools</a> </div>

    Read the article

  • CodePlex Daily Summary for Saturday, November 09, 2013

    CodePlex Daily Summary for Saturday, November 09, 2013Popular ReleasesCoolpy: CoolpyI: Coolpy???,????rom??????window phone????????????。???????????Praxis2: Especificaciones de Casos de Uso Iteracción 1: Especificaciones de Casos de Uso Iteracción 1 Responsables Anderson CU Buscar Obra CU Registrar Obra CU Registrar Alquiler Juan Victor CU Buscar Cliente CU Registrar Cliente CU Registrar EntregaMedia Companion: Media Companion MC3.586b: Tv - Multi-episodes restored to MCThere's been a plenty of bug fixes occuring lately, with IMDB changing their info, and some great feed-back by users. But Thanks to Billyad2000, Multi-episodes, are now displaying correctly in Media Companion, complete with all functionality. This was a hard effort, with more than a few dev's in the past having looked at this code to get it working. But, like a light-bulb going off, Billy's managed to massage the code, and restore this much missed function...Dynamics AX 2012 R2 Kitting: AX 2012 R2 CU7 release of Kitting: Here is the AX 2012 R2 CU7 release of kitting. Released both as a XPO and a model.PantheR's GraphX for .NET: GraphX for .NET RELEASE v1.0.1: PLEASE RATE THIS RELEASE IF YOU LIKED IT! THANKS! :) RELEASE 1.0.1 + Changed ExportToImage() parameters: added useZoomControlSurface param that enables zoom control parent visual space to be used for export instead whole GraphArea panel. Using this technique it is possible to export graphs with negative vertices coordinates. + Added common interface IZoomControl for all included Zoom controls + Added new method GraphArea.GenerateGraph() that accepts only optional parameters and will use in...ConEmu - Windows console with tabs: ConEmu 131107 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe"Team Foundation Server Upgrade Guide: v3 - TFS 2013 Upgrade Guide: Welcome to the Team Foundation Server Upgrade Guide Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Known issues NoneUpgrading SharePoint section is not included yet. Independent technical review is pending.VidCoder: 1.5.12 Beta: Added an option to preserve Created and Last Modified times when converting files. In Options -> Advanced. Added an option to mark an automatically selected subtitle track as "Default". Updated HandBrake core to SVN 5878. Fixed auto passthrough not applying just after switching to it. Fixed bug where preset/profile/tune could disappear when reverting a preset.Toolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2013.9.25): XrmToolbox improvement Correct changing connection from the status dropdown Tools improvement Updated tool Audit Center (v1.2013.9.10) -> Publish entities Iconator (v1.2013.9.27) -> Optimized asynchronous loading of images and entities MetadataDocumentGenerator (v1.2013.11.6) -> Correct system entities reading with incorrect attribute type Script Manager (v1.2013.9.27) -> Retrieve only custom events SiteMapEditor (v1.2013.11.7) -> Reset of CRM 2013 SiteMap ViewLayoutReplicator (v1.201...Microsoft SQL Server Product Samples: Database: SQL Server 2014 CTP2 In-Memory OLTP Sample, based: This sample showcases the new In-Memory OLTP feature, which is part of SQL Server 2014 CTP2. It shows the new memory-optimized tables and natively-compiled stored procedures, and can be used to show the performance benefit of in-memory OLTP. Installation instructions for the sample are included in the file ‘awinmemsample.doc’, which is part of the download. You can ask a question about this sample at the SQL Server Samples Forum Composite C1 CMS - Open Source on .NET: Composite C1 4.1: Composite C1 4.1 (4.1.5058.34326) Write a review for this release - help us improve, recommend us. Getting started If you are new to Composite C1 and want to install it: http://docs.composite.net/Getting-started What's new in Composite C1 4.1 The following are highlights of major changes since Composite C1 4.0: General user features: Drag-and-drop images and files like PDF and Word directly from own your desktop and folders into page content Allow you to install Composite Form Builder ...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.9.0: Implemented Recent Scripts list Added checking for plugin updates from AboutBox Multiple formatting improvements/fixes Implemented selection of the CLR version when preparing distribution package Added project panel button for showing plugin shortcuts list Added 'What's New?' panel Fixed auto-formatting scrolling artifact Implemented navigation to "logical" file (vs. auto-generated) file from output panel To avoid the DLLs getting locked by OS use MSI file for the installation.Home Access Plus+: v9.7: Updated: JSON.net Fixed: Issue with the Windows 8 App Added: Windows 8.1 App Added: Win: Self Signed HAP+ Install Support Added: Win: Delete File Support Added: Timeout for the Logon Tracker Removed: Error Dialogs on the User Card Fixed: Green line showing over the booking form Note: a web.config file update is requiredWPF Extended DataGrid: WPF Extended DataGrid 2.0.0.10 binaries: Now row summaries are updated whenever autofilter value sis modified.xUnit.net - Unit testing framework for C# and .NET (a successor to NUnit): xUnit.net Visual Studio Runner: A placeholder for downloading Visual Studio runner VSIX files, in case the Gallery is down (or you want to downgrade to older versions).VeraCrypt: VeraCrypt version 1.0c: Changes between 1.0b and 1.0c (11 November 2013) : Set correctly the minimum required version in volumes header (this value must always follow the program version after any major changes). This also solves also the hidden volume issueCaptcha MVC: Captcha MVC 2.5: v 2.5: Added support for MVC 5. The DefaultCaptchaManager is no longer throws an error if the captcha values was entered incorrectly. Minor changes. v 2.4.1: Fixed issues with deleting incorrect values of the captcha token in the SessionStorageProvider. This could lead to a situation when the captcha was not working with the SessionStorageProvider. Minor changes. v 2.4: Changed the IIntelligencePolicy interface, added ICaptchaManager as parameter for all methods. Improved font size ...Duplica: duplica 0.2.498: this is first stable releaseDNN Blog: 06.00.01: 06.00.01 ReleaseThis is the first bugfix release of the new v6 blog module. These are the changes: Added some robustness in v5-v6 scripts to cater for some rare upgrade scenarios Changed the name of the module definition to avoid clash with Evoq Social Addition of sitemap providerVG-Ripper & PG-Ripper: VG-Ripper 2.9.50: changes NEW: Added Support for "ImageHostHQ.com" links NEW: Added Support for "ImgMoney.net" links NEW: Added Support for "ImgSavy.com" links NEW: Added Support for "PixTreat.com" links Bug fixesNew ProjectsAppBootloader: ???CS????????????? Let your C\S program more flexible for automatic updatesArduino Visual Studio: Purpose of this project is to demonstrate using Visual Studio 2012 with Atmel chip on a Arduino UNO board.ASP.NET Identity: ASP.NET Identity is the new membership system for building ASP.NET web applications. ASP.NET Identity allows you to add login features to your application and mAsset Maintenance Management Console: A.M.M.C is an attempt at creating an extremely versatile interface tool to maintain assets.AX 2012 R2 SYNC: SYNC for AX 2012 introduces a centralized company concept which holds and manages the enterprise-wide master data for synchronizing across multiple companies.BYOND - Build Your OwN Device (audio synths, effects, DSP, sequencer, VST): Byond is an environment for audio and midi programming in C#. It's available as VST plugin or standalone application.CoveSmushbox: A simple .NET library and a Windows CLI to the SMUSH Box.FORMULA 2.0: Formula specifications are highly declarative logic programs that can express rich synthesis and verification problems.Grostbite Engine: Free 3D game engine.hMailServer from RoundCube: A RoundCube plugin for interacting with hMailServer 5.4B1950. The plugin allows to configure vacation configuration of hMailServer from RoundCube.KDG's IP Reporter: Baisc reporter for local and private IP addresses.LADNS Service Watcher: LADNS Service WatcherLampguiden: LampguidenMedia Recommender Service: We are 6 software engineer students developing a media recommendation service as part of our 3rd semester project. photograp: SPA Photo gallery. Work in progress... Power Buddy: The Windows power tray icon only displays two power plans. If this has bothered you since 2009, Power Buddy is for you. Power Buddy displays all of them.Programming Demos: This project contains demonstration code that may be helpful to people learning VisualBasic .NET.Prototype : Traveling Alone Website: A website aiming to become an online community for solo travelers.ShowDBPool: ShowDBPoolThali: Thali is about making it falling off a log easy for users to run their own services on their own devices by building a peer to peer web.TiendaWebCursoAccentureNet: aWpf PdfReader: This is a pdf reader, development based WPF and MuPDF,You can use the keyboard to operate it.This is pdf reader can save the user's open records.

    Read the article

  • CodePlex Daily Summary for Wednesday, December 12, 2012

    CodePlex Daily Summary for Wednesday, December 12, 2012Popular ReleasesTorrents-List Organizer: Torrents-list organizer v 0.5.0.3: ????????? ? 0.5.0.3: 1) ?????????? ??????? ??? ?????????? ???-??????? ? ???????-??????. 2) ? ??????? ?????? ??????????? ?????????????? ????? ?????????? ?????????: ???? ?? ??????-???? ?????????? ?? ????????? ?? ????? ???????, ?? ? ????? ????? ????????? ????? ????????? ?? ????, ? ????????? ??? ???? ?????? ??????????.Fiskalizacija za developere: FiskalizacijaDev 2.0: Prva prava produkcijska verzija - Zakon je tu, ova je verzija uskladena sa trenutno važecom Tehnickom specifikacijom (v1.2. od 04.12.2012.) i spremna je za produkcijsko korištenje. Verzije iza ove ce ovisiti o naknadnim izmjenama Zakona i/ili Tehnicke specifikacije, odnosno, o eventualnim greškama u radu/zahtjevima community-a za novim feature-ima. Novosti u v2.0 su: - That assembly does not allow partially trusted callers (http://fiskalizacija.codeplex.com/workitem/699) - scheme IznosType...Simple Injector: Simple Injector v1.6.1: This patch release fixes a bug in the integration libraries that disallowed the application to start when .NET 4.5 was not installed on the machine (but only .NET 4.0). The following packages are affected: SimpleInjector.Integration.Web.dll SimpleInjector.Integration.Web.Mvc.dll SimpleInjector.Integration.Wcf.dll SimpleInjector.Extensions.LifetimeScoping.dllBootstrap Helpers: Version 1: First releasesheetengine - Isometric HTML5 JavaScript Display Engine: sheetengine v1.2.0: Main featuresOptimizations for intersectionsThe main purpose of this release was to further optimize rendering performance by skipping object intersections with other sheets. From now by default an object's sheets will only intersect its own sheets and never other static or dynamic sheets. This is the usual scenario since objects will never bump into other sheets when using collision detection. DocumentationMany of you have been asking for proper documentation, so here it goes. Check out the...MySqlBackup.NET - MySQL Backup Solution for C#, VB.NET, ASP.NET: MySqlBackup.NET 1.5.5 beta: Fix Bug: max_allowed_packet is modified to 1GB, but does not take effect in import & export process. This bug is fixed by re-initialize the MySqlConnection. Modified max_allowed_packet will only take effect on new connection, not on current connection.DirectX Tool Kit: December 11, 2012: December 11, 2012 Ex versions of DDSTextureLoader and WICTextureLoader Removed use of ATL's CComPtr in favor of WRL's ComPtr for all platforms to support VS Express editions Updated VS 2010 project for official 'property sheet' integration for Windows 8.0 SDK Minor fix to CommonStates for Feature Level 9.1 Tweaked AlphaTestEffect.cpp to work around ARM NEON compiler codegen bug Added dxguid.lib as a default library for Debug builds to resolve GUID link issuesDirectXTex texture processing library: December 2012: December 11, 2012 Ex versions of CreateTexture, CreateShaderResourceView, DDSTextureLoader and WICTextureLoader Fixed BC2 and BC3 decompression issue for unusual color encoding case Converted annotation to SAL2 for improved VS 2012 /analyze experience Updated DirectXTex, DDSView, and Texconv with VS 2010 + Windows 8.0 SDK project using official 'property sheets'ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.1 Final for 10.1: We are proud to announce the release of ArcGIS Editor for OpenStreetMap version 2.1. This download is compatible with ArcGIS 10.1, and includes setups for the Desktop Component, Desktop Component when 64 bit Background Geoprocessing is installed, and the Server Component. Important: if you already have ArcGIS Editor for OSM installed but want to install this new version, you will need to uninstall your previous version and then install this one. This release includes support for the ArcGIS 1...Ad Rotator for Windows & Windows Phone: AdRotator v1.3 Silverlight: Note now also available via NuGet for both WP7 and WP8 v 1.3 Changelog: *Updated Ad Providers to Latest releases, inc: - Inneractive (new Nokia release) - Updated WP Smaato - MS Ad SDK Changed Caching strategy to always grab from network unless unavailable Pubcenter (Suspend/Resume) feature added Pubcenter "Active" fix option Cleaned up some threaded calls Other minor fixes For usage details check out the following tutorial blog post - http://bit.ly/S5CD4T *Note Included bin...SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8.2: This release just contains some fixes that have been done since the last release. Plus, this is strong named as well. I apologize for the lack of updates but my free time is less these days.Media Companion: MediaCompanion3.511b release: Two more bug fixes: - General Preferences were not getting restored - Fanart and poster image files were being locked, preventing changes to themVodigi Open Source Interactive Digital Signage: Vodigi Release 5.5: The following enhancements and fixes are included in Vodigi 5.5. Vodigi Administrator - Manage Music Files - Add Music Files to Image Slide Shows - Manage System Messages - Display System Messages to Users During Login - Ported to Visual Studio 2012 and MVC 4 - Added New Vodigi Administrator User Guide Vodigi Player - Improved Login/Schedule Startup Procedure - Startup Using Last Known Schedule when Disconnected on Startup - Improved Check for Schedule Changes - Now Every 15 Minutes - Pla...Secretary Tool: Secretary Tool v1.1.0: I'm still considering this version a beta version because, while it seems to work well for me, I haven't received any feedback and I certainly don't want anyone relying solely on this tool for calculations and such until its correct functioning is verified by someone. This version includes several bug fixes, including a rather major one with Emergency Contact Information not saving. Also, reporting is completed. There may be some tweaking to the reporting engine, but it is good enough to rel...VidCoder: 1.4.10 Beta: Added progress percent to the title bar/task bar icon. Added MPLS information to Blu-ray titles. Fixed the following display issues in Windows 8: Uncentered text in textbox controls Disabled controls not having gray text making them hard to identify as disabled Drop-down menus having hard-to distinguish white on light-blue text Added more logging to proxy disconnect issues and increased timeout on initial call to help prevent timeouts. Fixed encoding window showing the built-in pre...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.400: Version 2.5.0.400 (Release): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Update the documentation. InfoMan: Write the documentation. Other Downloads Downloads OverviewHome Access Plus+: v8.5: v8.5.1211.1240 Fixed: changed to using the thumbnailPhoto attribute instead of jpegPhoto v8.5.1208.1500 This is a point release, for the other parts of HAP+ see the v8.3 release. Fixed: #me#me issue with the Edit Profile Link Updated: 8.5.1208 release Updated: Documentation with hidden booking system feature Added: Room Drop Down to the Booking System (no control panel interface), can be Resource Specific Fixed: Recursive AD Group Membership Lookup Fixed: User.IsInRole with recursive lookup...Http Explorer: httpExplorer-1.1: httpExplorer now has the ability to connect to http server via web proxies. The proxy may be explicitly specified by hostname or IP address. Or it may be specified via the Internet Options settings of Windows. You may also specify credentials to pass to the proxy if the proxy requires them. These credentials may be NTLM or basic authentication (clear text username and password).Bee OPOA Platform: Bee OPOA Demo V1.0.001: Initial version.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.78: Fix for issue #18924 - using -pretty option left in ///#DEBUG blocks. Fix for issue #18980 - bad += optimization caused bug in resulting code. Optimization has been removed pending further review.New ProjectsBattle of Colors: Vacation project. Summary.blockme: This is a Blog using C#, ASP.Net MVC3 & RazorCoevery for Windows Phone: Coevery for Windows Phone is a free CRM Windows Phone application developed by Nova Software which is a .NET focused software development company.DNN Flash Viewer: Simple module for displaying flash content within a DNN pane.DonablRow Line Follower Simulator: This Application helps you to find the best Algorithm for your line follower robot.ExcelMerge: Merge microsoft excel file to a single.FCMGAAI: project ini merupakan implementasi algoritma fuzzy Cmeans dengan optimasi algoritma genetikaLIRC#: LIRC# is a simple client library to allow a .NET application to interact with an LIRC server to control or be controlled by IR devices.Managed Media Aggregation: Allowing developers to aggregate media from Rtsp sources over Rtsp without degrading the source bandwidth. Agnostic of Video or Audio format. Decodes Jpeg / RTPMarket Data Server: Local database server with quotes and trade-related data associated with equity, fixed-income, financial derivatives, currency, and other investment instrumentsproject13251212: papproject13271212: paPutovanje: Android aplikacija napisana za Mtel android ligu 2Questionario dinâmico: Questionario dinâmico para fins de estudos.Rasoulian: my RepoSharepoint Blog Archive Web Part: This Web Part is an alternative of the standart SharePoint Blog Site Archives Web Part. It's based on SharePoint 2010 Blog Site Archives Web Part by Bandar AlSimpleSocket for Windows Phone: SimpleSocket for Windows Phone is a super simple to use wrap around the built in socket framework that makes using socket connections incredibly easy and fast.

    Read the article

  • The Benefits of Smart Grid Business Software

    - by Sylvie MacKenzie, PMP
    Smart Grid Background What Are Smart Grids?Smart Grids use computer hardware and software, sensors, controls, and telecommunications equipment and services to: Link customers to information that helps them manage consumption and use electricity wisely. Enable customers to respond to utility notices in ways that help minimize the duration of overloads, bottlenecks, and outages. Provide utilities with information that helps them improve performance and control costs. What Is Driving Smart Grid Development? Environmental ImpactSmart Grid development is picking up speed because of the widespread interest in reducing the negative impact that energy use has on the environment. Smart Grids use technology to drive efficiencies in transmission, distribution, and consumption. As a result, utilities can serve customers’ power needs with fewer generating plants, fewer transmission and distribution assets,and lower overall generation. With the possible exception of wind farm sprawl, landscape preservation is one obvious benefit. And because most generation today results in greenhouse gas emissions, Smart Grids reduce air pollution and the potential for global climate change.Smart Grids also more easily accommodate the technical difficulties of integrating intermittent renewable resources like wind and solar into the grid, providing further greenhouse gas reductions. CostsThe ability to defer the cost of plant and grid expansion is a major benefit to both utilities and customers. Utilities do not need to use as many internal resources for traditional infrastructure project planning and management. Large T&D infrastructure expansion costs are not passed on to customers.Smart Grids will not eliminate capital expansion, of course. Transmission corridors to connect renewable generation with customers will require major near-term expenditures. Additionally, in the future, electricity to satisfy the needs of population growth and additional applications will exceed the capacity reductions available through the Smart Grid. At that point, expansion will resume—but with greater overall T&D efficiency based on demand response, load control, and many other Smart Grid technologies and business processes. Energy efficiency is a second area of Smart Grid cost saving of particular relevance to customers. The timely and detailed information Smart Grids provide encourages customers to limit waste, adopt energy-efficient building codes and standards, and invest in energy efficient appliances. Efficiency may or may not lower customer bills because customer efficiency savings may be offset by higher costs in generation fuels or carbon taxes. It is clear, however, that bills will be lower with efficiency than without it. Utility Operations Smart Grids can serve as the central focus of utility initiatives to improve business processes. Many utilities have long “wish lists” of projects and applications they would like to fund in order to improve customer service or ease staff’s burden of repetitious work, but they have difficulty cost-justifying the changes, especially in the short term. Adding Smart Grid benefits to the cost/benefit analysis frequently tips the scales in favor of the change and can also significantly reduce payback periods.Mobile workforce applications and asset management applications work together to deploy assets and then to maintain, repair, and replace them. Many additional benefits result—for instance, increased productivity and fuel savings from better routing. Similarly, customer portals that provide customers with near-real-time information can also encourage online payments, thus lowering billing costs. Utilities can and should include these cost and service improvements in the list of Smart Grid benefits. What Is Smart Grid Business Software? Smart Grid business software gathers data from a Smart Grid and uses it improve a utility’s business processes. Smart Grid business software also helps utilities provide relevant information to customers who can then use it to reduce their own consumption and improve their environmental profiles. Smart Grid Business Software Minimizes the Impact of Peak Demand Utilities must size their assets to accommodate their highest peak demand. The higher the peak rises above base demand: The more assets a utility must build that are used only for brief periods—an inefficient use of capital. The higher the utility’s risk profile rises given the uncertainties surrounding the time needed for permitting, building, and recouping costs. The higher the costs for utilities to purchase supply, because generators can charge more for contracts and spot supply during high-demand periods. Smart Grids enable a variety of programs that reduce peak demand, including: Time-of-use pricing and critical peak pricing—programs that charge customers more when they consume electricity during peak periods. Pilot projects indicate that these programs are successful in flattening peaks, thus ensuring better use of existing T&D and generation assets. Direct load control, which lets utilities reduce or eliminate electricity flow to customer equipment (such as air conditioners). Contracts govern the terms and conditions of these turn-offs. Indirect load control, which signals customers to reduce the use of on-premises equipment for contractually agreed-on time periods. Smart Grid business software enables utilities to impose penalties on customers who do not comply with their contracts. Smart Grids also help utilities manage peaks with existing assets by enabling: Real-time asset monitoring and control. In this application, advanced sensors safely enable dynamic capacity load limits, ensuring that all grid assets can be used to their maximum capacity during peak demand periods. Real-time asset monitoring and control applications also detect the location of excessive losses and pinpoint need for mitigation and asset replacements. As a result, utilities reduce outage risk and guard against excess capacity or “over-build”. Better peak demand analysis. As a result: Distribution planners can better size equipment (e.g. transformers) to avoid over-building. Operations engineers can identify and resolve bottlenecks and other inefficiencies that may cause or exacerbate peaks. As above, the result is a reduction in the tendency to over-build. Supply managers can more closely match procurement with delivery. As a result, they can fine-tune supply portfolios, reducing the tendency to over-contract for peak supply and reducing the need to resort to spot market purchases during high peaks. Smart Grids can help lower the cost of remaining peaks by: Standardizing interconnections for new distributed resources (such as electricity storage devices). Placing the interconnections where needed to support anticipated grid congestion. Smart Grid Business Software Lowers the Cost of Field Services By processing Smart Grid data through their business software, utilities can reduce such field costs as: Vegetation management. Smart Grids can pinpoint momentary interruptions and tree-caused outages. Spatial mash-up tools leverage GIS models of tree growth for targeted vegetation management. This reduces the cost of unnecessary tree trimming. Service vehicle fuel. Many utility service calls are “false alarms.” Checking meter status before dispatching crews prevents many unnecessary “truck rolls.” Similarly, crews use far less fuel when Smart Grid sensors can pinpoint a problem and mobile workforce applications can then route them directly to it. Smart Grid Business Software Ensures Regulatory Compliance Smart Grids can ensure compliance with private contracts and with regional, national, or international requirements by: Monitoring fulfillment of contract terms. Utilities can use one-hour interval meters to ensure that interruptible (“non-core”) customers actually reduce or eliminate deliveries as required. They can use the information to levy fines against contract violators. Monitoring regulations imposed on customers, such as maximum use during specific time periods. Using accurate time-stamped event history derived from intelligent devices distributed throughout the smart grid to monitor and report reliability statistics and risk compliance. Automating business processes and activities that ensure compliance with security and reliability measures (e.g. NERC-CIP 2-9). Grid Business Software Strengthens Utilities’ Connection to Customers While Reducing Customer Service Costs During outages, Smart Grid business software can: Identify outages more quickly. Software uses sensors to pinpoint outages and nested outage locations. They also permit utilities to ensure outage resolution at every meter location. Size outages more accurately, permitting utilities to dispatch crews that have the skills needed, in appropriate numbers. Provide updates on outage location and expected duration. This information helps call centers inform customers about the timing of service restoration. Smart Grids also facilitates display of outage maps for customer and public-service use. Smart Grids can significantly reduce the cost to: Connect and disconnect customers. Meters capable of remote disconnect can virtually eliminate the costs of field crews and vehicles previously required to change service from the old to the new residents of a metered property or disconnect customers for nonpayment. Resolve reports of voltage fluctuation. Smart Grids gather and report voltage and power quality data from meters and grid sensors, enabling utilities to pinpoint reported problems or resolve them before customers complain. Detect and resolve non-technical losses (e.g. theft). Smart Grids can identify illegal attempts to reconnect meters or to use electricity in supposedly vacant premises. They can also detect theft by comparing flows through delivery assets with billed consumption. Smart Grids also facilitate outreach to customers. By monitoring and analyzing consumption over time, utilities can: Identify customers with unusually high usage and contact them before they receive a bill. They can also suggest conservation techniques that might help to limit consumption. This can head off “high bill” complaints to the contact center. Note that such “high usage” or “additional charges apply because you are out of range” notices—frequently via text messaging—are already common among mobile phone providers. Help customers identify appropriate bill payment alternatives (budget billing, prepayment, etc.). Help customers find and reduce causes of over-consumption. There’s no waiting for bills in the mail before they even understand there is a problem. Utilities benefit not just through improved customer relations but also through limiting the size of bills from customers who might struggle to pay them. Where permitted, Smart Grids can open the doors to such new utility service offerings as: Monitoring properties. Landlords reduce costs of vacant properties when utilities notify them of unexpected energy or water consumption. Utilities can perform similar services for owners of vacation properties or the adult children of aging parents. Monitoring equipment. Power-use patterns can reveal a need for equipment maintenance. Smart Grids permit utilities to alert owners or managers to a need for maintenance or replacement. Facilitating home and small-business networks. Smart Grids can provide a gateway to equipment networks that automate control or let owners access equipment remotely. They also facilitate net metering, offering some utilities a path toward involvement in small-scale solar or wind generation. Prepayment plans that do not need special meters. Smart Grid Business Software Helps Customers Control Energy Costs There is no end to the ways Smart Grids help both small and large customers control energy costs. For instance: Multi-premises customers appreciate having all meters read on the same day so that they can more easily compare consumption at various sites. Customers in competitive regions can match their consumption profile (detailed via Smart Grid data) with specific offerings from competitive suppliers. Customers seeing inexplicable consumption patterns and power quality problems may investigate further. The result can be discovery of electrical problems that can be resolved through rewiring or maintenance—before more serious fires or accidents happen. Smart Grid Business Software Facilitates Use of Renewables Generation from wind and solar resources is a popular alternative to fossil fuel generation, which emits greenhouse gases. Wind and solar generation may also increase energy security in regions that currently import fossil fuel for use in generation. Utilities face many technical issues as they attempt to integrate intermittent resource generation into traditional grids, which traditionally handle only fully dispatchable generation. Smart Grid business software helps solves many of these issues by: Detecting sudden drops in production from renewables-generated electricity (wind and solar) and automatically triggering electricity storage and smart appliance response to compensate as needed. Supporting industry-standard distributed generation interconnection processes to reduce interconnection costs and avoid adding renewable supplies to locations already subject to grid congestion. Facilitating modeling and monitoring of locally generated supply from renewables and thus helping to maximize their use. Increasing the efficiency of “net metering” (through which utilities can use electricity generated by customers) by: Providing data for analysis. Integrating the production and consumption aspects of customer accounts. During non-peak periods, such techniques enable utilities to increase the percent of renewable generation in their supply mix. During peak periods, Smart Grid business software controls circuit reconfiguration to maximize available capacity. Conclusion Utility missions are changing. Yesterday, they focused on delivery of reasonably priced energy and water. Tomorrow, their missions will expand to encompass sustainable use and environmental improvement.Smart Grids are key to helping utilities achieve this expanded mission. But they come at a relatively high price. Utilities will need to invest heavily in new hardware, software, business process development, and staff training. Customer investments in home area networks and smart appliances will be large. Learning to change the energy and water consumption habits of a lifetime could ultimately prove even more formidable tasks.Smart Grid business software can ease the cost and difficulties inherent in a needed transition to a more flexible, reliable, responsive electricity grid. Justifying its implementation, however, requires a full understanding of the benefits it brings—benefits that can ultimately help customers, utilities, communities, and the world address global issues like energy security and climate change while minimizing costs and maximizing customer convenience. This white paper is available for download here. For further information about Oracle's Primavera Solutions for Utilities, please read our Utilities e-book.

    Read the article

  • SQLAuthority News – Job Interviewing the Right Way (and for the Right Reasons) – Guest Post by Feodor Georgiev

    - by pinaldave
    Feodor Georgiev is a SQL Server database specialist with extensive experience of thinking both within and outside the box. He has wide experience of different systems and solutions in the fields of architecture, scalability, performance, etc. Feodor has experience with SQL Server 2000 and later versions, and is certified in SQL Server 2008. Feodor has written excellent article on Job Interviewing the Right Way. Here is his article in his own language. A while back I was thinking to start a blog post series on interviewing and employing IT personnel. At that time I had just read the ‘Smart and gets things done’ book (http://www.joelonsoftware.com/items/2007/06/05.html) and I was hyped up on some debatable topics regarding finding and employing the best people in the branch. I have no problem with hiring the best of the best; it’s just the definition of ‘the best of the best’ that makes things a bit more complicated. One of the fundamental books one can read on the topic of interviewing is the one mentioned above. If you have not read it, then you must do so; not because it contains the ultimate truth, and not because it gives the answers to most questions on the subject, but because the book contains an extensive set of questions about interviewing and employing people. Of course, a big part of these questions have different answers, depending on location, culture, available funds and so on. (What works in the US may not necessarily work in the Nordic countries or India, or it may work in a different way). The only thing that is valid regardless of any external factor is this: curiosity. In my belief there are two kinds of people – curious and not-so-curious; regardless of profession. Think about it – professional success is directly proportional to the individual’s curiosity + time of active experience in the field. (I say ‘active experience’ because vacations and any distractions do not count as experience :)  ) So, curiosity is the factor which will distinguish a good employee from the not-so-good one. But let’s shift our attention to something else for now: a few tips and tricks for successful interviews. Tip and trick #1: get your priorities straight. Your status usually dictates your priorities; for example, if the person looking for a job has just relocated to a new country, they might tend to ignore some of their priorities and overload others. In other words, setting priorities straight means to define the personal criteria by which the interview process is lead. For example, similar to the following questions can help define the criteria for someone looking for a job: How badly do I need a (any) job? Is it more important to work in a clean and quiet environment or is it important to get paid well (or both, if possible)? And so on… Furthermore, before going to the interview, the candidate should have a list of priorities, sorted by the most importance: e.g. I want a quiet environment, x amount of money, great helping boss, a desk next to a window and so on. Also it is a good idea to be prepared and know which factors can be compromised and to what extent. Tip and trick #2: the interview is a two-way street. A job candidate should not forget that the interview process is not a one-way street. What I mean by this is that while the employer is interviewing the potential candidate, the job seeker should not miss the chance to interview the employer. Usually, the employer and the candidate will meet for an interview and talk about a variety of topics. In a quality interview the candidate will be presented to key members of the team and will have the opportunity to ask them questions. By asking the right questions both parties will define their opinion about each other. For example, if the candidate talks to one of the potential bosses during the interview process and they notice that the potential manager has a hard time formulating a question, then it is up to the candidate to decide whether working with such person is a red flag for them. There are as many interview processes out there as there are companies and each one is different. Some bigger companies and corporates can afford pre-selection processes, 3 or even 4 stages of interviews, small companies usually settle with one interview. Some companies even give cognitive tests on the interview. Why not? In his book Joel suggests that a good candidate should be pampered and spoiled beyond belief with a week-long vacation in New York, fancy hotels, food and who knows what. For all I can imagine, an interview might even take place at the top of the Eifel tower (right, Mr. Joel, right?) I doubt, however, that this is the optimal way to capture the attention of a good employee. The ‘curiosity’ topic What I have learned so far in my professional experience is that opinions can be subjective. Plus, opinions on technology subjects can also be subjective. According to Joel, only hiring the best of the best is worth it. If you ask me, there is no such thing as best of the best, simply because human nature (well, aside from some physical limitations, like putting your pants on through your head :) ) has no boundaries. And why would it have boundaries? I have seen many curious and interesting people, naturally good at technology, though uninterested in it as one  can possibly be; I have also seen plenty of people interested in technology, who (in an ideal world) should have stayed far from it. At any rate, all of this sums up at the end to the ‘supply and demand’ factor. The interview process big-bang boils down to this: If there is a mutual benefit for both the employer and the potential employee to work together, then it all sorts out nicely. If there is no benefit, then it is much harder to get to a common place. Tip and trick #3: word-of-mouth is worth a thousand words Here I would just mention that the best thing a job candidate can get during the interview process is access to future team members or other employees of the new company. Nowadays the world has become quite small and everyone knows everyone. Look at LinkedIn, look at other professional networks and you will realize how small the world really is. Knowing people is a good way to become more approachable and to approach them. Tip and trick #4: Be confident. It is true that for some people confidence is as natural as breathing and others have to work hard to express it. Confidence is, however, a key factor in convincing the other side (potential employer or employee) that there is a great chance for success by working together. But it cannot get you very far if it’s not backed up by talent, curiosity and knowledge. Tip and trick #5: The right reasons What really bothers me in Sweden (and I am sure that there are similar situations in other countries) is that there is a tendency to fill quotas and to filter out candidates by criteria different from their skill and knowledge. In job ads I see quite often the phrases ‘positive thinker’, ‘team player’ and many similar hints about personality features. So my guess here is that discrimination has evolved to a new level. Let me clear up the definition of discrimination: ‘unfair treatment of a person or group on the basis of prejudice’. And prejudice is the ‘partiality that prevents objective consideration of an issue or situation’. In other words, there is not much difference whether a job candidate is filtered out by race, gender or by personality features – it is all a bad habit. And in reality, there is no proven correlation between the technology knowledge paired with skills and the personal features (gender, race, age, optimism). It is true that a significantly greater number of Darwin awards were given to men than to women, but I am sure that somewhere there is a paper or theory explaining the genetics behind this. J This topic actually brings to mind one of my favorite work related stories. A while back I was working for a big company with many teams involved in their processes. One of the teams was occupying 2 rooms – one had the team members and was full of light, colorful posters, chit-chats and giggles, whereas the other room was dark, lighted only by a single monitor with a quiet person in front of it. Later on I realized that the ‘dark room’ person was the guru and the ultimate problem-solving-brain who did not like the chats and giggles and hence was in a separate room. In reality, all severe problems which the chatty and cheerful team members could not solve and all emergencies were directed to ‘the dark room’. And thus all worked out well. The moral of the story: Personality has nothing to do with technology knowledge and skills. End of story. Summary: I’d like to stress the fact that there is no ultimately perfect candidate for a job, and there is no such thing as ‘best-of-the-best’. From my personal experience, the main criteria by which I measure people (co-workers and bosses) is the curiosity factor; I know from experience that the more curious and inventive a person is, the better chances there are for great achievements in their field. Related stories: (for extra credit) 1) Get your priorities straight. A while back as a consultant I was working for a few days at a time at different offices and for different clients, and so I was able to compare and analyze the work environments. There were two different places which I compared and recently I asked a friend of mine the following question: “Which one would you prefer as a work environment: a noisy office full of people, or a quiet office full of faulty smells because the office is rarely cleaned?” My friend was puzzled for a while, thought about it and said: “Hmm, you are talking about two different kinds of pollution… I will probably choose the second, since I can clean the workplace myself a bit…” 2) The interview is a two-way street. One time, during a job interview, I met a potential boss that had a hard time phrasing a question. At that particular time it was clear to me that I would not have liked to work under this person. According to my work religion, the properly asked question contains at least half of the answer. And if I work with someone who cannot ask a question… then I’d be doing double or triple work. At another interview, after the technical part with the team leader of the department, I was introduced to one of the team members and we were left alone for 5 minutes. I immediately jumped on the occasion and asked the blunt question: ‘What have you learned here for the past year and how do you like your job?’ The team member looked at me and said ‘Nothing really. I like playing with my cats at home, so I am out of here at 5pm and I don’t have time for much.’ I was disappointed at the time and I did not take the job offer. I wasn’t that shocked a few months later when the company went bankrupt. 3) The right reasons to take a job: personality check. A while back I was asked to serve as a job reference for a coworker. I agreed, and after some weeks I got a phone call from the company where my colleague was applying for a job. The conversation started with the manager’s question about my colleague’s personality and about their social skills. (You can probably guess what my internal reaction was… J ) So, after 30 minutes of pouring common sense into the interviewer’s head, we finally agreed on the fact that a shy or quiet personality has nothing to do with work skills and knowledge. Some years down the road my former colleague is taking the manager’s position as the manager is demoted to a different department. Reference: Feodor Georgiev, Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Fibre channel long distance woes

    - by Marki
    I need a fresh pair of eyes. We're using a 15km fibre optic line across which fibrechannel and 10GbE is multiplexed (passive optical CWDM). For FC we have long distance lasers suitable up to 40km (Skylane SFCxx0404F0D). The multiplexer is limited by the SFPs which can do max. 4Gb fibrechannel. The FC switch is a Brocade 5000 series. The respective wavelengths are 1550,1570,1590 and 1610nm for FC and 1530nm for 10GbE. The problem is the 4GbFC fabrics are almost never clean. Sometimes they are for a while even with a lot of traffic on them. Then they may suddenly start producing errors (RX CRC, RX encoding, RX disparity, ...) even with only marginal traffic on them. I am attaching some error and traffic graphs. Errors are currently in the order of 50-100 errors per 5 minutes when with 1Gb/s traffic. Optics Here is the power output of one port summarized (collected using sfpshow on different switches) SITE-A units=uW (microwatt) SITE-B ********************************************** FAB1 SW1 TX 1234.3 RX 49.1 SW3 1550nm (ko) RX 95.2 TX 1175.6 FAB2 SW2 TX 1422.0 RX 104.6 SW4 1610nm (ok) RX 54.3 TX 1468.4 What I find curious at this point is the asymmetry in the power levels. While SW2 transmits with 1422uW which SW4 receives with 104uW, SW2 only receives the SW4 signal with similar original power only with 54uW. Vice versa for SW1-3. Anyway the SFPs have RX sensitivity down to -18dBm (ca. 20uW) so in any case it should be fine... But nothing is. Some SFPs have been diagnosed as malfunctioning by the manufacturer (the 1550nm ones shown above with "ko"). The 1610nm ones apparently are ok, they have been tested using a traffic generator. The leased line has also been tested more than once. All is within tolerances. I'm awaiting the replacements but for some reason I don't believe it will make things better as the apparently good ones don't produce ZERO errors either. Earlier there was active equipment involved (some kind of 4GFC retimer) before putting the signal on the line. No idea why. That equipment was eliminated because of the problems so we now only have: the long distance laser in the switch, (new) 10m LC-SC monomode cable to the mux (for each fabric), the leased line, the same thing but reversed on the other side of the link. FC switches Here is a port config from the Brocade portcfgshow (it's like that on both sides, obviously) Area Number: 0 Speed Level: 4G Fill Word(On Active) 0(Idle-Idle) Fill Word(Current) 0(Idle-Idle) AL_PA Offset 13: OFF Trunk Port ON Long Distance LS VC Link Init OFF Desired Distance 32 Km Reserved Buffers 70 Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF Locked E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF LOS TOV enable OFF NPIV capability ON QOS E_Port OFF Port Auto Disable: OFF Rate Limit OFF EX Port OFF Mirror Port OFF Credit Recovery ON F_Port Buffers OFF Fault Delay: 0(R_A_TOV) NPIV PP Limit: 126 CSCTL mode: OFF Forcing the links to 2GbFC produces no errors, but we bought 4GbFC and we want 4GbFC. I don't know where to look anymore. Any ideas what to try next or how to proceed? If we can't make 4GbFC work reliably I wonder what the people working with 8 or 16 do... I don't assume that "a few errors here and there" are acceptable. Oh and BTW we are in contact with everyone of the manufacturers (FC switch, MUX, SFPs, ...) Except for the SFPs to be changed (some have been changed before) nobody has a clue. Brocade SAN Health says the fabric is ok. MUX, well, it's passive, it's only a prism, nature at it's best. Any shots in the dark? APPENDIX: Answers to your questions @Chopper3: This is the second generation of Brocades exhibiting the problem. Before we had 5000s, now we have 5100s. In the beginning when we still had the active MUX we rented a longdistance laser once to put it into the switch directly in order to make tests for a day, during that day of course it was clean. But as I said, sometimes it's clean just like that. And sometimes it's not. Alternative switches would mean to rebuild the entire SAN with those only to test. Alternative SFPs, well they're hard to come by just like that. @longneck: The line is rented. It's a dark fibre (9um monomode) so there's noone else on it. Sure there are splices. I can't go and look but I have to trust they have been done correctly. As I said the line has been checked and rechecked (using an optical time-domain reflectometer). Obviously you don't have all this equipment yourself because it's way too expensive. @mdpc: What would be the "wrong" type of cable according to you? Up to the switch everything is monomode, yes. The connectors are the correct ones too. Yeah I know there are the green ones where the fibre is cut off at a certain angle etc. But we have the correct ones for all that I know. Progress Report #1 We have had two fabrics (=2x2 switches) with Brocade 5100s with FabricOS 6.4.1 and two fabrics (another 2x4 switches) on FabricOS 7.0.2. On the longdistance ISLs (one in each fabric) it turned out that with FOS 6.4.1 setting it to long distance issues warnings about the VC Init setting and consequently the fill word. But those are only warnings. FOS 7.0.2 requires you to do modifications to VCI and the fillword for long distance links. Setting FOS 6.4.1 to the LS (long-distance static distance) setting with wrong VCI and fillword setting made the whole fabric inoperational (stuck in an SCN loop, use fabriclog -s to see, you don't see it anywhere else, no port error counters or anything increasing). Currently I'm giving the one fabric with the IMHO more correct settings a beating and it seems to do fine, whereas the other one without much traffic still has errors here and there. In short: We have eliminated the active part of the MUX (the FC retimer). We are putting the long distance SFPs into the end equipment themselves. Just to be sure we bought new monomode cables to connect the end equipment to the remaining passive part of the MUX. We are now trying out several long distance configs. It's almost black magic. Everything that happens is mostly empirical, noone seems to have a clue what are the exact reasons to do something. ("We have tried this, and it didn't work, then we tried that and it worked, so we stuck with that." But noone really seems to know why.) I'll keep you updated. Progress Report #2 We got the new lasers for one of the fabrics on warranty. It's ultra clean even on 4GbFC. They're transmitting with roughly 2mW (3dBm) whereas the others are only at 1.5mW (1.5dBm) although that should really be enough. The other fabric (where the lasers are apparently ok) still produces one or two CRCs infrequently. Using sfpshow the SFP producing the actual RX errors shows Status/Ctrl: 0x82 Alarm flags[0,1] = 0x5, 0x40 Warn Flags[0,1] = 0x5, 0x40 Now I'll have to find out what that means. Not sure if it was there before. Well I'll first clear my head with a week of vacation. 8-)

    Read the article

  • a value that shows in select mode disappears in edit mode from a gridview column

    - by Jbob Johan
    i have a gridview(GridView1) with a few Bound Fields first one is Date (ActivityDate) from a table named "tblTime" i have managed to add one extra colum (manually), that is not bound that shows dayInWeek value according to the "ActivityDate" field programtically in CodeBehind but when i enter into Edit Mode , all Bound fields are showing their values correctly but the one column i have added manually will not show the value as it did in "select mode"(first mode b4 trying to edit) while im not a great dibbagger i have manged to view the cell's value (GridView1.Rows[e.NewEditIndex].Cells[1].Text) which does hold on to the day in week value but it does not appear in gridview edit mode only this is some of the code protected void GridView1_RowDataBound(object sender, GridViewRowEventArgs e) { if (e.Row.RowType == DataControlRowType.Header) { e.Row.Cells[0].Text = "?????"; //Activity Date (in hebrew) e.Row.Cells[1].Text = "??? ?????"; //DayinWeek e.Row.Cells[2].Text = "??????"; //ActivityType (work seek vacation) named Reason e.Row.Cells[3].Text = "??? ?????"; //time finish (to Work) e.Row.Cells[4].Text = "??? ?????"; //Time out (of work) } if (e.Row.RowType == DataControlRowType.DataRow) { if (Convert.ToBoolean(ViewState["theSubIsclckd"]) == true) //if submit button clicked { try { string twekday1 = Convert.ToString(DataBinder.Eval(e.Row.DataItem, "ActiveDate")); twekday1 = twekday1.Remove(9, 11); //geting date only without the time- portion string[] arymd = twekday1.Split('/'); // spliting [d m y] in order to make int day = Convert.ToInt32(arymd[1]); // it into [m d y] ...also requierd int month = Convert.ToInt32(arymd[0]); // when i update the table int year = Convert.ToInt32(arymd[2]); DateTime ILDateInit = new DateTime(year, month, day); //finally extracting Day CultureInfo ILci = CultureInfo.CreateSpecificCulture("he-IL"); // in week //from the converted activity date string MyIL_DayInWeek = ILDateInit.ToString("dddd", ILci); ViewState["MyIL_DayInWeek"] = MyIL_DayInWeek; e.Row.Cells[1].Text = MyIL_DayInWeek; string displayReason = DataBinder.Eval(e.Row.DataItem, "Reason").ToString(); e.Row.Cells[2].Text = displayReason; } catch (System.Exception excep) { Js.functions.but bb = new Js.functions.but(); bb.buttonName = "rex"; bb.documentwrite = true; bb.testCsVar = excep.ToString(); bb.f1(bb); // this was supposed to throw exep in javaScript injected from code behid - alert } // just in case.. } } so that works for the non edit period of time then when i hit the edit ... no day in week shows THE aspX - after selcting date... name etc' , click on button to display gridview: <asp:Button ID="TheSubB" runat="server" Text="???" onclick="TheSubB_Click" /> <asp:GridView ID="GridView1" runat="server" OnRowDataBound="GridView1_RowDataBound" onrowediting="GridView1_RowEditing" onrowcancelingedit="GridView1_RowCancelingEdit" OnRowUpdating="GridView1_RowUpdating" BackColor="LightGoldenrodYellow" BorderColor="Tan" BorderWidth="1px" CellPadding="2" ForeColor="Black" GridLines="None" AutoGenerateColumns="False" DataKeyNames="tId" DataSourceID="SqlDataSource1" style="z-index: 1; left: 0%; top: 0%; position: relative; width: 812px; height: 59px; font-family:Arial; text-align: center;" AllowSorting="True" > <AlternatingRowStyle BackColor="PaleGoldenrod" /> <Columns> <asp:BoundField DataField="ActiveDate" HeaderText="ActiveDate" SortExpression="ActiveDate" ControlStyle-Width="70" DataFormatString="{0:dd/MM/yyyy}" > <ControlStyle Width="70px" /> </asp:BoundField> <asp:TemplateField HeaderText="???.???.??"> <EditItemTemplate> <asp:TextBox ID="dayinW_EditTB" runat="server"></asp:TextBox> </EditItemTemplate> <ItemTemplate> <asp:Label ID="dayInW_editLabel" runat="server"></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:BoundField DataField="Reason" HeaderText="???? ?????" SortExpression="Reason" ControlStyle-Width="50"> <ControlStyle Width="50px" /> </asp:BoundField> <asp:BoundField DataField="TimeOut" HeaderText="TimeOut" SortExpression="TimeOut" ControlStyle-Width="50" DataFormatString="{0:HH:mm}" > <ControlStyle Width="50px"></ControlStyle> </asp:BoundField> <asp:BoundField DataField="TimeIn" HeaderText="TimeIn" SortExpression="TimeIn" ControlStyle-Width="50" DataFormatString="{0:HH:mm}" > <ControlStyle Width="50px"></ControlStyle> </asp:BoundField> <asp:TemplateField HeaderText="????" > <EditItemTemplate> <asp:ImageButton width="15" Height="15" ImageUrl="~/images/edit.png" runat="server" CausesValidation="True" CommandName="Update" Text="Update"> </asp:ImageButton> <asp:ImageButton Width="15" Height="15" ImageUrl="images/cancel.png" runat="server" CausesValidation="False" CommandName="Cancel" Text="Cancel"> </asp:ImageButton> </EditItemTemplate> <ItemTemplate> <asp:ImageButton width="25" Height="15" ImageUrl="images/edit.png" ID="EditIB" runat="server" CausesValidation="False" CommandName="Edit" AlternateText="????"></asp:ImageButton> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="???"> <ItemTemplate> <asp:ImageButton width="15" Height="15" ImageUrl="images/Delete.png" ID="DeleteIB" runat="server" CommandName="Delete" AlternateText="???" /> </ItemTemplate> </asp:TemplateField> </Columns> <FooterStyle BackColor="Tan" /> <HeaderStyle BackColor="Tan" Font-Bold="True" /> <PagerStyle BackColor="PaleGoldenrod" ForeColor="DarkSlateBlue" HorizontalAlign="Center" /> <SelectedRowStyle BackColor="DarkSlateBlue" ForeColor="GhostWhite" /> <SortedAscendingCellStyle BackColor="#FAFAE7" /> <SortedAscendingHeaderStyle BackColor="#DAC09E" /> <SortedDescendingCellStyle BackColor="#E1DB9C" /> <SortedDescendingHeaderStyle BackColor="#C2A47B" /> </asp:GridView>

    Read the article

< Previous Page | 4 5 6 7 8