Search Results

Search found 3909 results on 157 pages for 'brand newbie'.

Page 80/157 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• Problems with Black Box KVM

  - by MrWizard54

  I just recieved a shipment of equipment orderd by my predicessor that includes brand new Dell Optiplex 990 computers, with standard mice and keyboards. Also included were Black Box ServSwitch Secure KVMs. I've worked with KVMs before and hypothetically they should be the easiest thing in the world to deal with, plug it all together, push the button, go. However, for the life of me I can't get the computers to recognize the mouse or keyboard when plugged into the KVM. We've seen this with multiple KVMs across the order. Any one know what I'm missing? Computers are all Dell 990 with Windows 7.

  Read the article

• Very slow Windows 7 on Thinkpad T61

  - by bogdanf

  I have a very strange problem with my fresh install of Windows 7 Profesional, 64bits on my Lenovo Thinkpad T61 : The overal performance is very slow, the disk is constantly spinning, even without any program running (after boot, no other programs installed). The boot process is very slow itself (4-5 minutes). I mention that the laptop was fine on XP until the upgrade. Thanks ! Additional info (as requested by the comments) : 2GB RAM Yes, I added all the manufacturer (Lenovo) drivers and updates (using the utility provided by Lenovo) Tried with both 32 and 64 bits editions. The 32 bits one is performing a little better, but not very usable either. The hdd has enough space (20 GB or so) The problem is still present on a fresh install, so no recycle bin emptying or unistall programs (there aren't any except plain 7) would help. I'm not a newbie, so no obvious causes are left unchecked

  Read the article

• Another "Trouble copying music files from HD to 16GB thumb drive"

  - by Ron

  I have a brand new HP Quad Core - 6GB Ram - running 64-bit Windows 7. Running Norton Internet 2010. I try copying music files from HD to 16 GB thumbdrive and get blue screen after a few files have transfered over to thumbdrive. Computer blinks once and boom - blue screen and then reboots. This is really aggravating. I stopped anti-virus, pulled other USB attached devices - still does same thing. Any solutions out there?

  Read the article

• File corruption

  - by firesoul

  Recently, almost every file I try to copy into my HDDs gets corrupted. When writing to the disk, some portion of the file is replaced by random bytes (Checked using Diff apps) There's no problem reading existing files. I'm pretty sure it's not the HDD, becasue I've tried another HDD (a brand new 1TB WD) and the problem still remains. I have an AMD Athlon 64 X2 CPU, an ASUS M2NE motherboard, 2 WD SATA II HDDs (320GB + 1TB) and 3GB of Corsair RAM. My OS is Windows 7 (64 bit) Now, what could be the cause of this? If it's the motherboard, can it be fixed by using a PCI SATA card?

  Read the article

• FreePBX: Asterisk in the Cloud (EC2) Audio Problems

  - by neezer

  Please pardon the newbie question, but I can't seem to figure this out. I followed the Voxilla's tut to the tee: http://voxilla.com/2009/10/15/voxill...p-by-step-1457 But in making calls, my softphones connect, yet no audio (in either direction). I know from poking around the forums that this is generally caused by two factors: NAT and audio codecs. I (being new to the arena), however, don't know which. I believe I have Asterisk and the clients restricted to just ulaw, and I also believe I have the correct ports open, and my externip set correctly (I think the Voxilla AMI does this automatically, since it's in the cloud). I'm a bit lost. I'd be happy to post whatever configuration files that might help, provided you tell me where they are on the filesystem. But like I said before, this is effectively a vanilla install of Voxilla's own FreePBX AMI. I'd appreciate any help or guidance here. Thanks!

  Read the article

• Best way to deploy my node.js app on a Varnish/Nginx server

  - by Saif Bechan

  I am about to deploy a brand new node.js application, and I need some help setting this up. The way my setup is right now is as follows. I have Varnish running on external_ip:80 I have Nginx behind running on internal_ip:80 Both are listening on port 80, one internal port, one external. NOTE: the node.js app runs on WebSockets Now I have the my new node.js application that will listen on port 8080. Can I have varnish set up that it is in front of both nginx and node.js. Varnish has to proxy the websocket to port 8080, but then the static files such as css, js, etc has to go trough port 80 to nignx. Nginx does not support websockets out of the box, else I would so a setup like: varnish - nignx - node.js

  Read the article

• FreePBX: Asterisk in the Cloud (EC2) Audio Problems

  - by neezer

  Please pardon the newbie question, but I can't seem to figure this out. I followed the Voxilla's tut to the tee: http://voxilla.com/2009/10/15/voxill...p-by-step-1457 But in making calls, my softphones connect, yet no audio (in either direction). I know from poking around the forums that this is generally caused by two factors: NAT and audio codecs. I (being new to the arena), however, don't know which. I believe I have Asterisk and the clients restricted to just ulaw, and I also believe I have the correct ports open, and my externip set correctly (I think the Voxilla AMI does this automatically, since it's in the cloud). I'm a bit lost. I'd be happy to post whatever configuration files that might help, provided you tell me where they are on the filesystem. But like I said before, this is effectively a vanilla install of Voxilla's own FreePBX AMI. I'd appreciate any help or guidance here. Thanks!

  Read the article

• smartOS HPC config suggestion

  - by Andrew B.

  I'm configuring a brand new HPC server and am interested in using SmartOS because of it's virtualization control and zfs features. Does this configuration make sense for a SmartOS HPC, or would you recommend an alternative? System Specs: 2x 8-core xeon 384 GB RAM 30 TB HDs with 2x512GB SSDs Uses: - zfs for serving data to different vms, and over the network; 1 SSD for L2ARC and 1 for ZIL - typically 1-2 ubuntu instances running R and custom C/C++ code My biggest concerns as a newbie to SmartOS and ZFS are: (1) will I get near-metal performance from ubuntu running on SmartOS if it is the only active vm? (2) how do I serve data from the global zfs pool to the containers and other network devices?

  Read the article

• FreeNAS/ZFS/Raid-Z slightly different disks

  - by muskratt

  I'm considering using FreeNAS and "recycling" some of my older 1TB disks. Two are the exact same model Western Digital while another is Seagate and the fourth is Samsung. Typically, since all disks are not equal, I'll create my arrays on a Windows-based server 1GB undersized to prevent a replacement disk not being large enough. Dell is notorious for sending replacement SATA disks of different brand---knock on wood, no problems yet. Since not all drives are created equally and they can vary a few MBs, is there a way to make the the FreeNas/ZFS/Raid-Z function in the same way I do for my Windows-based servers above? Thanks

  Read the article

• Fresh Apache install can't be connected to

  - by Wayne M

  I've got to be missing something here. I have a brand new CentOS server with a LAMP install on it. My domain host (GoDaddy) has the server's IP address configured as the "A Record". Since the server will host subdomains I have enabled NameVirtualHost and set up a virtual host pointing to the web app on the server. I haven't touched anything else in Apache, and it's listening on Port 80 like it should be. However, I can't connect to the server either by DNS or by IP address. I've set up several servers exactly like this one and never run into this before. What could be causing this? Did someone on the host set up a firewall or something that blocks port 80? As I said, I can't connect to the server via anything, but it's a barebones box with LAMP installed on it.

  Read the article

• Windows 7 clean install, freezes when starting programs

  - by madmaze

  Hello Everyone, I have a problem on a brand new Windows 7 Lenovo T510 intel I5/4gb ram. When I got the Laptop, right off the bat i noticed that it would freeze up often on th most simple tasks. After a while I got fed up and reinstalled. All that is installed currently is AVG/Firefox/Office. I Rebooted after installing those things and when I try to open Firefox it freezes just trying to open. Ive tried a few other things and it freezes all the time. Any Ideas what it could be?

  Read the article

• SSH from Windows Vista to Ubuntu (using cwrsync)

  - by user39141

  Newbie questoin but I can't seem to figure it out. Using cwrsync which in turn calls ssh.exe from a Windows Vista box to Ubuntu. For below, user in ubuntu is 'linuxuser' and user on Windows box is 'winuser' - remote box is 'linuxhost' and windows box is 'winhost' Exported keys such that on the remote box /home/linuxuser/.ssh/authorized_keys is correctly populated. Problem is when I launch ssh it tries to write to /home/winuser/.ssh instead of /cygdrive/home/users/winuser/.ssh as below. c:\Program Files (x86)\cwRsync\binssh linuxuser@linuxhost Could not create directory '/home/winuser/.ssh'. The authenticity of host 'linuxhost (192.168.1.105)' can't be establish ed. RSA key fingerprint is 67:10:a9:49:6e:a3:2b:4a:a0:e0:b7:75:76:da:c3:04. Are you sure you want to continue connecting (yes/no)? Host key verification failed.

  Read the article

• Iptables remote port forwarding and dynamic remote ip

  - by lbwtz2

  Hello, I want to forward a port from my remote vps to my domestic server and I am quite a newbie with iptables. The problem is that I am using a dynamic dns service to reach my home server from the internet so I don't have a fixed ip and iptables doesn't like urls. The rules I am willing to use are these: -t nat -A PREROUTING -p tcp -i eth0 -d xxx.xxx.xxx.xxx --dport 8888 -j DNAT --to myhome.tld:80 -A FORWARD -p tcp -i eth0 -d myhome.tld --dport 80 -j ACCEPT Of course I recevie a Error BAD IP ADDRESS because of myhome.tld. What can I do?

  Read the article

• Running projects from NTFS partition on Ubuntu

  - by tsuby

  I'm dual booting Windows 7/Ubuntu 12.04. I want to run C++/Java projects from a NTFS partition, where I keep generally all my files and projects. I fiddled with the fstab. One time I removed 'noexec', the other I changed it to 'exec'. After that,each time, I remounted the partition and it still didn't work. I tried using sudo mount -o remount,exec /media/mypartition It didn't work either. There was a somewhat similar question already, but it didn't have the proper answer for me or I didn't know how to make it work(note: I am a total newbie with Ubuntu and Linux in general).

  Read the article

• Java Development in Linux

  - by Zac

  I'm a developer and am brand new to Linux (Ubuntu): I'm wondering what the "best practices dictate" for what FHS directories to install various tools to. Things I'll be installing: Eclipse & plugins GlassFish SVN ...etc. I see that /opt is for holding additional ("optional") software packages, but also see /usr as a place for utils and apps. In another post a user recommended I create an entire partition for /srv alone, and to do my staging there (I assume he meant that /srv is where GlassFish and other servers should go?). So basically: what FHS directories do Linux developers use for which type of tools? Thanks for any input here

  Read the article

• Mail sent from local Postfix marked as "possible phishing" in Outlook

  - by leo grrr

  Hi folks, Sorry for the newbie question--this is not my area of expertise by a long shot. I work at a small development shop and we finally got around to doing code reviews. (Yay!) I set up an instance of Review Board -- an open-source code review tool -- on one of our local servers but it doesn't seem to like talking to our hosted Exchange server to send notification emails. I decided to just install Postfix on that same box and send mail from localhost, which is working much more reliably, but Outlook disables all links in the email announcements and marks it as possible phishing. What is making these emails look suspicious and what can I change? Would the best thing be to figure out how to relay to Exchange from Postfix? Thanks!

  Read the article

• How do you access usermin

  - by Lobe

  I have recently setup a web server with webmin, virtualmin and usermin on CentOS to host some websites and email, however I am unable to access usermin. I can access webmin from www.foobar.com:10000 but I can't access usermin from www.foobar.com:20000 This thread seems to have dealt within the same issue, however when I tried the command "telnet localhost 20000" it came back with a connection refused message. Any idea how to get this running. I'll let you know in advance that I am a linux newbie and this is a large learning experience, so don't rule out anything if you are thinking "oh, but he wouldn't be dumb enough to forget that" or the like

  Read the article

• Converting or playing a .264 video file?

  - by Dan

  I recently bought a Chinese brand DVR (to record security cams). The DVR exports the video files with a ".264" extension. This is my first time ever dealing with this video format. Anyhow I've been trying to convert the videos to any other format so it will be easier to watch the videos. The problem is that I could only find one program that can convert and play those files which is Elecard studio something, and even that Elecard studio thing is having trouble with these files, some of them are just making it crash so I can't convert them. I've tried to find some other programs but I couldn't find anything that can actually play those files. How can I play or convert these files to another format?

  Read the article

• further troubleshooting on a p8z77 motherboard

  - by Journeyman Geek

  I just bought a brand now asus p8z77 motherboard with a intel 3770. Its currently not booting - the system powers up for half a second and then powers down, and the CPU error light shines. I've tried switching ram between slots, switching PSUs, updating the bios (which can be done sans processor or ram on this model). Power: The 8 pin power connector is definitely in place correctly, and I've tried swapping PSUs between a new seasonic m12, and a known good cheapie PSU Ram: Ram is in the recommended slot for single stick operation, and tried swapping between the two sticks of DDR3 I have. Processor: Its installed correctly as far as I can tell, no obvious bent pins on the motherboard. At this point I'm guessing I'll need to RMA something. Are there any 'definitive' tests I can try, short of swapping CPU and motherboard that would let me know it is the CPU? Can I actually trust the error light on the motherboard?

  Read the article

• iPhone not detected by mac

  - by George

  My Mac doesn't recognize my iPhone when I plug it. Here is the configuration: (basically everything is updated) 10.6.4 mac system (Snow Leopard) XCode version 3.2.5 iTunes 10.1.2 iPhone 4 , 16 GB, iOS version 4.2.1 I tested for a few days with no problems but now it does not recognize it anymore. My provisioning profiles are brand new. It's not detected in iTunes, nor in the XCode Organizer. First it told me that there is no provisioned iOS Device connected. I deleted the iPhone from the Organizer and hoped it would get recognized again, but that didn't happen. I tried restart everything (Mac/iTunes/XCode/iPhone), but nothing worked. Do you have any ideas? I would be more interested in making it work with XCode right now. I don't really care about music and stuff.

  Read the article

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect

  - by Goober

  I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• Access RAID configuration in x3550M2

  - by Mike B

  I'm trying to configure RAID in a IBM x3550 M2 server. I can't find any messages on boot about any hotkey to access the configuration utility. I wasn't able either in BIOS. The card is a on board LSI 1068e. I can't find the original CD's shipped with the server, but I downloaded Server Guide 9.21 from IBM web. Booted with that, and only getting stuck at "Windows loading"p. Tried with a 8.? version from a x3550 (M1), but it was less useful. Although I do not consider myself an expert, I'm starting to feel like a newbie luser. Any help?

  Read the article

• reinstall PHP as apache module

  - by Ewan

  Hi sorry for the newbie question, I am not a sys admin by any means. I recently set up a VPS with webmin/virtualmin. Our CMS of choice says that PHP needs to be run as an Apache module in order to run. It says: Recompile PHP with the flag --with-apxs I've googled but can't find how to do this particularly. I think I installed PHP using "yum install php" or thru webmin, but can't remember exactly. Appreciate if anyone can point me in the right direction.

  Read the article

• 'DNS service isn't responding' in windows 7

  - by pradeeptp

  Hi All, I bought a brand new Dell Studio 1558 just last week. It has windows 7 home premium 64-bit installed on it. My friend who is occupying the adjacent room has a laptop with windows XP. Both of us are connecting to the same wireless router of the hotel. My friend is able to connect to the wireless network without any trouble, but when I try to connect, I get the error "DNS service isn't responding". I met two more people in the same hotel with win XP laptop and they too dont have any problem. I have gone to possibly all the forums and website but I haven't been able to fix this error :(. I have done all the basic troubleshooting but I have no luck yet. Pls help. Following is one forum where the problem seem to have been trouble shooted but not for all. http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/eeb84518-903d-46d1-9398-80cf211878d7

  Read the article

• VMware - Broadcom 1000Gbps NIC does not link at 100Mbps to a Cisco switch port

  - by Spirit

  Today we've stumbled on a very awkward situation with our VMWare Server. The server is with ESX 3.5 that has a 1Gbps NIC. We bought a brand new managed Cisco Linksys switch with 10/100Mbps interface ports but when we plugged the cable in one of the ports the link simply does not wanted to activate :S... Does anyone with more VMware experience have ever had similar problem? From what I know is that 1Gbps NICs are backwards compatible with 100Mbps switches. This is what we've tryed so far but with no success: Tryed: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004089 Tryed to modify the /etc/modules.conf folowing the guide from this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=813 After the changes I have restarted the networking services using # service network restart, # service mgmt-vmware restart and # service vmware-vpxa restart It seems that no matter how many times, or whatever approach/method (GUI or Shell) we try to change the speed and duplex of the network adapter and to force it to 100mbps it only accepts 1Gbps .. I am starting to go nuts :@

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >