Search Results

Search found 2838 results on 114 pages for 'considered harmful'.

Page 80/114 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

  • What is proper relationship between /etc/hosts and DNS A records for a Linux server?

    - by MountainX
    I have an Ubuntu server. It is going to be a web server with a URI of www.example.com. I have a DNS A record pointing www.example.com to the server's IP address. Let's say I pick "trinity" as the hostname for this server. I want to set up the DNS records correctly. I need reverse DNS to www.example.com, so a CNAME for www.example.com doesn't seem appropriate. Here's my question: Is it considered best practice to set up two DNS records (which in my case would likely be two A records), one for www.example.com and one for trinity.example.com, both pointing to this server's IP address? (Or, even if it is not accepted as a best practice, is it a good idea?) If so, would the following be a proper /etc/hosts file? $ cat /etc/hosts 127.0.1.1 trinity.local trinity 99.100.101.102 trinity.example.com trinity www.example.com This server is a Linode and Linode's docs seem to imply that the above approach is best (if I am reading them correctly). Here's the relevant section. I bolded the line that seems to apply here. Update /etc/hosts Next, edit your /etc/hosts file to resemble the following example, replacing "plato" with your chosen hostname, "example.com" with your system's domain name, and "12.34.56.78" with your system's IP address. As with the hostname, the domain name part of your FQDN does not necesarily need to have any relationship to websites or other services hosted on the server (although it may if you wish). As an example, you might host "www.something.com" on your server, but the system's FQDN might be "mars.somethingelse.com." File:/etc/hosts 127.0.0.1 localhost.localdomain localhost 12.34.56.78 plato.example.com plato The value you assign as your system's FQDN should have an "A" record in DNS pointing to your Linode's IP address. For more information on configuring DNS, please see our guide on configuring DNS with the Linode Manager.

    Read the article

  • DRBD stacked resources: recovering from failure

    - by Marcus Downing
    We're running a stacked four-node DRBD setup like this: A --> B | | v v C D This means three DRBD resources running across these four servers. Servers A and B are Xen hosts running VMs, while servers C and D are for backups. A is in the same datacentre as C. From server A to server C, in the first datacentre, using protocol B From server B to server D, in the second datacentre, using protocol B From server A to server B, different datacentres, stacked resource using protocol A First question: booting a stacked resource We haven't got any vital data running on this setup yet - we're still making sure it works first. This means simulating power cuts, network outages etc and seeing what steps we need to recover. When we pull the power out of server A, both resources go down; it attempts to bring them back up at next boot. However, it only succeeds at bringing up the lower-level resource, A-C. The stacked resource A-B doesn't even try to connect, presumably because it can't find the device until it's a connected primary on the lower level. So if anything goes wrong we need to manually log in and bring that resource up, then start the virtual machine on top of it. Second question: setting the primary of a stacked resource Our lower-level resources are configured so that the right one is considered primary: resource test-AC { on A { ... } on C { ... } startup { become-primary-on A; } } But I don't see any way to do the same with a stacked resource, as the following isn't a valid config: resource test-AB { stacked-on-top-of test-AC { ... } stacked-on-top-of test-BD { ... } startup { become-primary-on test-AC; } } This too means that recovering from a failure requires manual intervention. Is there no way to set the automatic primary for a stacked resource?

    Read the article

  • Liked Arch Linux - but I am still not sure if its the right distro for me...

    - by BlackAndGold
    As the title says... I used Arch Linux for a while and liked it a lot: leightweight, sleek, fast and well documented with a great community. However I had to format my hd and for the sake of being too lazy to reinstall arch, I used windows 7 exclusively for a while. Now I want to get back to linux again (still dual boot), mainly for web development purposes and using handy tools such as rsync ect. Again, I liked Arch, but there is too much tweeking, too much reading up and too much figuring out what to do as well es some bad suprises especially when you need them the least and when just quickly want to get some work done. I kind of would like to have a little more "out of the box" distro that is still fast and somewhat leighweight and of course reliable. I actually considered Ubuntu, which I am not too big of a fan of, but I will still give the minimal install a shot. However other distros seem interesting as well, such as crunchbang and mint debian ecpecially. My question, hoping this isn't too boring for many you, what is the right distro for me?

    Read the article

  • phpmyadmin “Forbidden: You don't have permission to access /phpmyadmin on this server.”

    - by Caterpillar
    I need to modify the file /etc/httpd/conf.d/phpMyAdmin.conf in order to allow remote users (not only localhost) to login # phpMyAdmin - Web based MySQL browser written in php # # Allows only localhost by default # # But allowing phpMyAdmin to anyone other than localhost should be considered # dangerous unless properly secured by SSL Alias /phpMyAdmin /usr/share/phpMyAdmin Alias /phpmyadmin /usr/share/phpMyAdmin <Directory "/usr/share/phpMyAdmin/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order Allow,Deny Allow from all </Directory> <Directory /usr/share/phpMyAdmin/setup/> <IfModule mod_authz_core.c> # Apache 2.4 <RequireAny> Require ip 127.0.0.1 Require ip ::1 </RequireAny> </IfModule> <IfModule !mod_authz_core.c> # Apache 2.2 Order Deny,Allow Allow from All Allow from 127.0.0.1 Allow from ::1 </IfModule> </Directory> # These directories do not require access over HTTP - taken from the original # phpMyAdmin upstream tarball # <Directory /usr/share/phpMyAdmin/libraries/> Order Deny,Allow Deny from All Allow from None </Directory> <Directory /usr/share/phpMyAdmin/setup/lib/> Order Deny,Allow Deny from All Allow from None </Directory> <Directory /usr/share/phpMyAdmin/setup/frames/> Order Deny,Allow Deny from All Allow from None </Directory> # This configuration prevents mod_security at phpMyAdmin directories from # filtering SQL etc. This may break your mod_security implementation. # #<IfModule mod_security.c> # <Directory /usr/share/phpMyAdmin/> # SecRuleInheritance Off # </Directory> #</IfModule> When I get into phpmyadmin webpage, I am not prompted for user and password, before getting the error message: Forbidden: You don't have permission to access /phpmyadmin on this server. My system is Fedora 20

    Read the article

  • Creating a pseudoterminal to make sudo happy

    - by larsks
    I need to automate the provisioning of a cloud instance (running Fedora 17) for which the following initial facts are true: I have ssh-key based access to a remote user (cloud) That user has password-free root access via sudo. Manual configuration is as simple as logging in and running sudo su - and having at it, but I would like to fully automate this process. The trick is that the system defaults to having the requiretty option enabled for sudo, which means that an attempt to do something like this: ssh remotehost sudo yum -y install puppet Will fail: sudo: sorry, you must have a tty to run sudo I am working around this right now by first pushing over a small Python script that will run a command on a pseudoterminal: import os import sys import errno import subprocess pid, master_fd = os.forkpty() if pid == 0: # child process: now that we're attached to a # pty, run the given command. os.execvp(sys.argv[1], sys.argv[1:]) else: while True: try: data = os.read(master_fd, 1024) except OSError, detail: if detail.errno == errno.EIO: break if not data: break sys.stdout.write(data) os.wait() Assuming that this is named pty, I can then run: ssh remotehost ./pty sudo yum -y install puppet This works fine, but I'm wondering if there are solutions already available that I haven't considered. I would normally think about expect, but it's not installed by default on this system. screen can do this in a pinch, but the best I came up with was: screen -dmS sudo somecommand ...which does work but eats the output. Are there any other tools available that will allocate a pseudoterminal for me that are going to be generally available?

    Read the article

  • what are valid 'ack' values?

    - by WileECanisLatrans
    having an issue with a vendor who claims the cause of a problem is an invalid 'ack' value in the tcp data. I'm using java so I didn't write this layer. I used snoop to capture the traffic on the wire and am using wireshark to display the data. Here is what is happening. After receiving a multi-packet(5) message I see a multi-pack(3) response. The first packet in the response has a value for 'ack' that is different than the 'ack' value in the other two packets. The vendor claims this data is suspect. I've provided sample data below. I'm not a tcp expert so I don't know if this is a problem or not. I've tried to find something on valid ack values and it seems to me the value should be 80018 but that doesn't mean the 78345 is wrong. I found this on the web and it seems to apply but I'm not sure: "the ack value of any data segment is considered valid as long as it does not acknowledge data ahead of the next segment to send". Thanks for your help. My understanding is the vendor has written their own tcp layer. * source seq ack len * vendor 75465 10924 0 * vendor 75465 10924 1440 * vendor 76905 10924 1440 * vendor 78345 10924 1440 * vendor 79785 10924 233 * me 10924 78345 0 * me 10924 80018 0 * me 10924 80018 197

    Read the article

  • What exactly is a Deamon ? ( how to run a root command from apache binded script that uses www-data user )?

    - by user224235
    I am trying to run this command from WSGI script service httpd restart The problem is this command can only be run by root and apache uses the www-data user. it has been said the solution is to use a Deamon Process i suppose the idea is to send the command to a file that will be executed by a script that is considered "root" user.. its difficult to understand why they would call this a Deamon Process and try to scare me. Perhaps it should have been called : proxy process when i got the idea that this was a proxy process.. i thought about adding a line to /var/spool/cron/root that way the cron would execute the command for me. but of course this means i have to get the system time and then add 1 second to it and then add it to that line so cron would execute the command for me as root but my script demands an output instantly. so i suppose i need to create a DEAMON PROCESS that works like the cron. in other words it is a bash file that will execute the command in a plain file.. but will this DEAMON PROCESS be running a while command 24/7 every second ? would that not waste resources ? it only needs to activate itself to check for a command to execute when there is a command to be executed. i mean in PHP and other programming languages.. running a while statement when there is nothing to be executed could waste resources of the server.. so why should a deamon process constantly be listening for anything. i only want it to listen and execute when it is needed. i do not need a process that is constantly listening.

    Read the article

  • Linux security: The dangers of executing malignant code as a standard user

    - by AndreasT
    Slipping some (non-root) user a piece of malignant code that he or she executes might be considered as one of the highest security breaches possible. (The only higher I can see is actually accessing the root user) What can an attacker effectively do when he/she gets a standard, (let's say a normal Ubuntu user) to execute code? Where would an attacker go from there? What would that piece of code do? Let's say that the user is not stupid enough to be lured into entering the root/sudo password into a form/program she doesn't know. Only software from trusted sources is installed. The way I see it there is not really much one could do, is there? Addition: I partially ask this because I am thinking of granting some people shell (non-root) access to my server. They should be able to have normal access to programs. I want them to be able to compile programs with gcc. So there will definitely be arbitrary code run in user-space...

    Read the article

  • what is the reason behind window service stopped ,whether its due to LAN problems or any other issues

    - by Steve
    I have a windowservice which named Trunk which stopped one day i just want to know the reason behind it? this is an entry in the logs, Nov 15 17:54:04.318 :Trunk-1516:Trunk:handle_control_event:Received CTRL_LOGOFF_EVENT, ignore it Nov 25 15:54:52.157 :Trunk-1516:Trunk:ERROR - Process Restart Count (5) Exceeded for:C:\Program Files\secon\11.1.4\bin\vmd Nov 25 15:54:52.157 :Trunk-1516:Trunk:Stopping Trunk ... Nov 25 15:54:52.314 :Trunk-1516:Trunk:Shutting down, signaled C:\Program F Nov 20 15:54:20.345 :SCBridge.RegisterBridge:Exception in method: ScUtility.ScCommandException (0xa08990002): Exception from HRESULT: 0xa08990002 Supplemental Information: None available. at ScServer.ScServiceProcessorRegistryManager.Attach(String serviceProcessor, ScClientInformation clientInfo, FORCE_ATTACH_SPEC forceAttachToMaster) at ScServer.ScServiceProcessorRegistry.Attach(String serviceProcessor, Object clientInfo) at ScServer.ScServiceProcessorRegistry.Attach(String serviceProcessor) at ServerControlInterface.SCBridge.RegisterBridge(String SPName) for system APOLLOSP0 attempting to attach and register with the Bridge i had seen service is registered with specific account, so i thought that user logged off from the machine that may be the reason behind it or any LAN disconnection problem . But Having taken another look at the above entry we seem to have a constant failure being generated in vmd which causes Trunk to detect vmd requires a restart. Most of the time it works OK and the restart count is anything up to 4. In this case the Trunk log confirms that the Restart Count is 5 and so is considered to be exceeded. Presumably, this triggers the termination of the other services and Trunk is actually doing its job.So, coould this just be a timing issue and we need to increase the tolerance level (i.e restart count) or do we need to address the 0xa08990002 error in vmd?

    Read the article

  • Recommend a UK based VPS host equivalent to Dreamhost [closed]

    - by Pez Cuckow
    I appreciate this question could be considered subjective and argumentative so can people make recommendations rather than arguing about the best. I believe the "correct" answer is the one closest to what I am looking for. Basically I live in the UK but have been using the US based Dreamhost for about 6 years now, and my web projects are getting to the scale where the websites need to the UK based to cope with the demand and load. I originally had shared hosting with Dreamhost but upgraded to a VPS a while ago, getting 512mb of RAM, unlimited disk space, bandwidth and domains for $30. Their control panel is a custom easy to use build that they have created in house and offers features very similar to other web panels (as far as I am aware). So basically my question boils down to, is there anywhere that offers an equivalent package? In all honesty as long as I have over 50gb HDD space and unlimited domains it doesn't really matter? Are there any VPS providers you would recommend as reliable? I promise to check every link posted, many thanks for your time!

    Read the article

  • download and process a file by ftp at set intervals, with error handling, rescheduling and status messages

    - by compound eye
    I want to download a data file from a remote ftp server to my machine at regular intervals. Once the file is downloaded I want to call another script which will process the file. My development machine is mac os x, the eventual deployment environment is linux. What's would be the stock standard way to automate this? I know I can use cron to schedule curl to download and to run a script that will process the downloaded file at regular intervals, and I know could write a slightly more complex script or an application that would do this and add error handling, rescheduling and sending status emails. But one of my requirements for this project is to write as little custom code as possible, instead I should try to use standard, tried and true existing tools, and if I do have to write code, to try and write the most straightforward code possible. The reason for this is the code will potentially be installed on a large number of machines, all of which will need to be tweaked, customised and maintained by different people, long after I am gone from the project, so the intention is to use well documented, well supported tools as much as possible. This seems such a common task, there must be tools and scripts all over the internet, written by people who have carefully considered everything that could possibly go wrong when you need to download and process a file from a remote server at regular intervals, with error handling, rescheduling and sending status messages. Is that what Expect is for? What would you recommend? (the system will be downloading weather prediction data every six hours, so that the system can prepare in the event of bad weather warnings)

    Read the article

  • Triple-Boot + 4 partition Limit

    - by dsimcha
    I just bought a new hard drive so that I could convert my XP-only machine into an XP-Ubuntu-Windows 7 triple boot machine. Since the drive is absurdly huge (1 TB) I wouldn't mind throwing ReactOS into the mix, too. I just found out that master boot records are limited to 4 entries, meaning 4 primary partitions. I had Windows XP set up on my old drive as a boot partition, a program files partition and a media partition. Since I really didn't want to install XP from scratch, I cloned this setup on my new drive. This leaves me one MBR partition entry for installing Windows 7, Ubuntu and ReactOS. I'd like to avoid having to install XP from scratch like the plague, partly because it's supposed to be a safety net in case things go wrong with my other OS's and because I've invested a lot of time getting it set up exactly the way I like it. Here are the options I've considered and why I don't like them: Install Windows 7 on my media partition. This would work, but I prefer to keep my media partition completely separate from any OS, so that I can reformat an OS partition without affecting my media partition at all. Use wubi or something to install Ubuntu in the same partition as something else. Again, this is brittle. Move all my media to a logical drive on an extended partition. Create another logical drive on this extended partition for Ubuntu. The problem here is that extended partitions are rather brittle--if you nuke one, it renders the rest useless. Just put the old drive back in my computer and run XP off it. Use the new one for the other OS's. The problem here is that the old drive is slower and uses extra power, generates extra heat, etc. Can anyone suggest any other possibilities that I may have overlooked?

    Read the article

  • How can I totally flatten a PDF in Mac OS on the command line?

    - by Matthew Leingang
    I use Mac OS X Snow Leopard. I have a PDF with form fields, annotations, and stamps on it. I would like to freeze (or "flatten") that PDF so that the form fields can't be changed and the annotations/stamps are no longer editable. Since I actually have many of these PDFs, I want to do this automatically on the command line. Some things I've tried/considered, with their degree of success: Open in Preview and Print to File. This creates a totally flat PDF without changing the file size. The only way to automate seems to be to write a kludgy UI-based AppleScript, though, which I've been trying to avoid. Open in Acrobat Pro and use a JavaScript function to flatten. Again, not sure how to automate this on the command line. Use pdftk with the flatten option. But this only flattens form fields, not stamps and other annotations. Use cupsfilter which can create PDF from many file formats. Like pdftk this flattened only the form fields. Use cups-pdf to hook into the Mac's printserver and save a PDF file instead of print. I used the macports version. The resulting file is flat but huge. I tried this on an 8MB file; the flattened PDF was 358MB! Perhaps this can be combined with a ghostscript call as in Ubuntu Tip:Howto reduce PDF file size from command line. Any other suggestions would be appreciated.

    Read the article

  • System With Two Network Adapters

    - by Synetech inc.
    Hi, My system has a NIC (Marvell Yukon) built-into the motherboard, but I also have a D-Link (RealTek) card. I figure that using the D-Link and disabling the Marvell makes the most sense, though I'm wondering if maybe the built-in one has better throughput (not that my Internet connection is so fast). Also, I'm wondering about the merits of using both at the same time. My router has four ports and I have experimented with enabling and plugging both NICs into the router. I was able to connect to the Internet, but the pattern of usage seemed irregular (which adapter was chosen for the transfer and any given point). I also considered bridging the two, but am having difficulty in finding out what exactly creating network bridge does in the context of the Windows Network Connections window. I am familiar with the concept of connecting networks, so it seems to me that birding two connections on the same segment is pointless at best (and can cause problems like loops?) Does anyone have any tips on what to do if a system has more than one NIC and any clarification on the bridge option? Thanks a lot.

    Read the article

  • How to use a common library of environment variables among different languages?

    - by JDS
    We have three main languages with which we perform system tasks: Bash, Ruby, and PHP, and Perl. Four, four main languages. We use managed environment variables to provide authorization info that automated scripts need. For example, a mysql user account and password. We'd like to use one single managed file to maintain these variables. In some instances, for example, in cron, these environment variables are not available. They are made available in CLI scripts because we source the env file in everyone's profile. But something like cron doesn't do that. On the CLI, when the env file is sourced, any given script can access those variables. Bash has them directly, PHP in $_ENV, ruby in ENV, etc. We can't source the file into non-Bash scripts, because most languages implement shell commands by running them in a subshell. We considered parsing the Bash, converting to the script's lang, and running the equivalent of "exec(parsed_output)" on the resulting strings. What is a good solution to providing managed environment vars to scripts running in cron, or similar?

    Read the article

  • What are the replacement options for an IDE hd for a DOS based system?

    - by dummzeuch
    I have got a few "embedded" systems running MSDOS 6.2 which boot from and store data to IDE hard disks. Since these drives are nearing their end of life, the question arises how we can replace them. The requirements are: DOS must be able to install and boot from these drives. They must be able to sustain heavy (mostly) write access. If possible, they should be able to survive moderate vibrations (not too bad since the current hds have survived several years of that) I considered the following options so far: other ide hard drives: Unfortunately modern IDE drives are too large so DOS cannot boot from them even if I create small partitions. Older IDE drives are just that: old, so they are probably not the most reliable ones any more. SSDs: There are a few SSDs with IDE interface available. I have not yet tried them. Does anybody have any experience with them? They look like the ideal replacement provided that DOS can boot from them and that writing speed does not deteriorate too much (the old hds are no race cars either). Compact Flash: There are adapters for using CF with IDE controllers and they work fine. DOS can boot from them and they have no problems at all with vibrations. What I am not sure about is their durability. DOS uses FAT so some very few sectors are written every time the medium is being written to. IDE to SATA converters: I have no idea whether they are any good. Has anybody tried them? It might be an option to use one of these to connect an SATA SSD to the system. Are there any alternatives that I have missed? (We are working on replacing these systems, but it will still take a few years.)

    Read the article

  • Setting up ssh config file with id_rsa through tunnel

    - by Rubens
    I've been struggling to set up a valid configuration to open a connection with a second machine, passing through another one, and using an id_rsa (which requests me a password) to connect to the third machine. I've asked this question in another forum, but I've received no answer that could be considered very helpful. The problem, better described, goes as follows: Local machine: user1@localhost Intermediary machine: user1@inter Remote target: user2@final I'm able to do the entire connection using pseudo-tty: ssh -t inter ssh user2@final (this will ask me the password for the id_rsa file I have in machine "inter") However, for speeding things up, I'd like to set my .ssh/config file, so that I can simply connect to machine "final" using: ssh final What I've got so far -- which does not work -- is, in my .ssh/config file: Host inter User user1 HostName inter.com IdentityFile ~/.ssh/id_rsa Host final User user2 HostName final.com IdentityFile ~/.ssh/id_rsa_2 ProxyCommand ssh inter nc %h %p The id_rsa file is used to connect to the middle machine (this requires me no password typing), and id_rsa_2 file is used to connect to machine "final" (this one requests a password). I've tried mixing up some LocalForward and/or RemoteForward fields, and putting the id_rsa files in both first and second machines, but I could not seem to succeed with no configuration whatsoever. Hope somebody can help me here! Regards! P.S.: the thread I've tried to get some help from: http://www.linuxquestions.org/questions/linux-general-1/proxycommand-on-ssh-config-file-4175433750/

    Read the article

  • Strange File-Server I/O Spikes - What Is Causing This?

    - by CruftRemover
    I am currently having a problem with a small Linux server that is providing file-sharing services to four Windows 7 32-bit clients. The server is an AMD PhenomX3 with two Western Digital 10EADS (1TB) drives, attached to a Gigabyte GA-MA770T-UD3 mainboard and running Ubuntu Server 10.04.1 LTS. The client machines are taking an extremely long time to access/transfer data on the file server. Applications often become non-responsive while trying to open files located remotely, or one program attempting to open a file but having to wait will prevent other software from accessing network resources at all. Other examples include one image taking 20 seconds or more to open, and in one instance a user waited 110 seconds for Microsoft Word 2007 to save a document. I had initially thought the problem was network-related, but this appears not to be the case. All cables and switches have been tested (one cable was replaced) for verification. This was additionally confirmed when closing down all client machines and rebooting the server resulted in the hard-drive light staying on solid during the startup process. For the first 15 minutes during boot, logon and after logging on (with no client machines attached), the system displayed a load average of 4 or higher. Symptoms included waiting several minutes for the logon prompt to appear, and then several minutes for the password prompt to appear after typing in a user name. After logon, it also took upwards of 45 seconds for the 'smartctl' man page to appear after the command 'man smartctl' was issued. After 15 minutes of this behaviour, the load average dropped to around 0.02 and the machine behaved normally. I have also considered that the problem is hard-drive-related, however diagnostic programs reveal no drive problems. Western Digital DLG, Spinrite and SMARTUDM show no abnormal characteristics - the drives are in perfect health as far as the hardware is concerned. I have thus far been completely unable to track down the cause of this problem, so any help is greatly appreciated. Requested Information: Output of 'free' hxxp://pastebin.com/mfsJS8HS (stupid spam filter) The command 'hdparm -d /dev/sda1' reports: HDIO_GET_DMA failed: Inappropriate ioctl for device (the BIOS is set to AHCI - I probably should have mentioned that).

    Read the article

  • One workstation gets slow access to the server, but others are fast

    - by Mike Hanson
    I've just setup a machine with Windows Server 2008. It hosts various services, like IIS, POP3, SMTP, Music for Squeezeboxes, VNC. All was working well for the first week or so. One day I needed to create a mapped drive on the server, so it could access files on my workstation. Windows indicated that Network Discovery was needed, so I turned it on with the "Home / Office" option (rather than "Public"). This may be coincidence, but since that time I've been having troubles accessing various services from my main workstation (running Windows 7/64): POP3 continued working correctly, but SMTP was delayed or failed entirely. (Telnet took 20 seconds to connect, but Outlook would never send messages.) VNC failed entirely. I reinstalled it on the server, and now it works but feels sluggish. The music web server was extremely delayed and usually failed. I tried reinstalling, and now it takes about 30 seconds to show the page name on the browser tab, and another 30 seconds to display any page contents. Other machines on the local network seem fine, as do machines connected via the Internet. I don't believe I changed anything on my own machine that would cause this. I considered the possibility that my anti-virus was involved, so I uninstalled AVG (commercial version), but that didn't help. I installed Norton 360 after that, and it didn't complain of viruses on my machine, and the delays remained. Because only my machine is affect, I'm tempted to blame it, except that reinstalling software on the server improved the situation, so there is almost certainly something going on with the server too. The firewall has all the necessary ports open, and it works fine for the other workstations (including external machines connected via the Internet), which indicates that it should be OK. Any ideas?

    Read the article

  • How may I retrieve data from an Excel table based on a variable number of criteria?

    - by Eshwar
    I have the following salary data for example: Country State 2012 2013 -> 2027 ======= ===== ==== ==== China Other 1000 1100 China Shanghai 1310 1400 China Tianjin 1450 1500 India Orissa 1500 1600 So now in another Excel sheet I would want an answer to one of the following questions: What is the salary in Shanghai for 2013? (Answer would be 1400) What is the salary in Hubei province for 2012? (Since it is not listed, use "Other" - 1000) What is the average salary in China for 2013? (Answer would be 1450) What is the highest salary in China for 2012? (Answer is Tianjin) So as in the above order of priority, I would like those numbers in another Excel sheet using some form of query. I considered PivotTables but I was wondering if there is another much better more efficient way of doing this? I imagine SQL is suited for this but I am not clued up on that. Some Excel functionality is much rather preferred. Also suggestions on an appropriate format of data for such queries would be appreciated.

    Read the article

  • Mail-Merge on Steroids: Can Word 2003 do this?

    - by richardtallent
    I have a huge report to put together, made up of over 1,000 smaller, nearly-identical reports. Each report includes: General 1:1 information (basic mail-merge stuff) Lots of text, some of which may need to be disabled or have alternate text based on a boolean field. A few embedded images, preferably loaded via HTTP URL, but if they have to be on the a file system thing I can do that. (Filenames will be provided as a field in the data source.) Fortunately, all images are roughly the same size/shape. Several 1:m tables with a few fields apiece. The kicker is the master/child tables. I've seen examples for Word 2000 for doing this by left-joining the master and child table and using some IF/THEN logic to know whether to jump to the next master record. But in my case, I have several of these subtables, so that approach won't really work. So, can Word 2003 handle arbitrary master/child tables? If so, how? If not, I considered InfoPath, but I haven't used it before, and it seems to be made for data entry, not long formatted reports. I'm a software developer, so I could always hack something together with a massive VBA macro, or generating the report in HTML on the web server (where the data is coming from anyway). But I'm hoping Word will work without such gymnastics, since it will give the ultimate users of the report template better control over formatting and making minor changes.

    Read the article

  • sudoer scheme to allow useful access to another web developer yet retain future control of a virtual

    - by Tchalvak
    Background: Virtual Private Server I have a virtual private server that I'm looking to host multiple websites on, and provide access to another web developer. I don't care about putting too many constraints on him, though I wouldn't mind isolating the site that he'll be developing from other sites on the server that I will develop. The problem: retain control Mainly what I want is to make sure that I retain control over the server in the future. I want to reserve the ability to create/promote/demote and other administrative functions that don't deal with web software. If I make him an admin, he can sudo su - and become root and remove root control from me, for example. I need him not to be able to: take away other admin permissions change the root password have control over other security/administrative functions I would like him to still be able to: install software (through apt-get) restart apache access mysql configure mysql/apache reboot edit web development configuration type files in /etc/ Other Standard Setups would be happily considered I've never really set up a good sudoers file, so simple example setups would be very useful, even if they're only somewhat similar to the settings that I'm hoping for above. Edit: I have not yet finalized permissions, so standard, useful sudo setups are certainly an option, the lists above are more what I'm hoping I can do, I don't know that that setup can be done. I'm sure that people have solved this type of problem before somehow, though, and I'd like to go with something somewhat tested as opposed to something I've homegrown.

    Read the article

  • Is the Windows VPN secure?

    - by Tor Haugen
    I have used a few VPN solutions over the years. Most are hard to set up, slow to connect and/or rather ill-behaved (replacing system drivers, disrupting each other etc). One solution I have never used earlier is the one built into Windows. This is mostly because the infrastructure guys always refuse to use it because they claim it's 'not secure'. Now I have finally had the chance to use it (on Windows 7), and wow, it's a breeze! Easy to set up, well-behaved, it connects almost instantly, automatically authenticates with my logged-in credentials, and integrates excellently with the UI. I have to say, unless it really isn't secure, I'll be happy if I never have to use another VPN product ever again. I gather the Windows VPN used to rely on PPTP, which is not considered secure. But in Windows 7/2008, it supports L2TP/IPSec, SSTP and IKEv2, and authenticates with EAP or CHAP/CHAPv2. That seems pretty up-to-date to me. But I'm just a lowly developer. Can someone in the know give me the lowdown on this?

    Read the article

  • saving data from a failing drive

    - by intuited
    An external 3½" HDD seems to be in danger of failing — it's making ticking sounds when idle. I've acquired a replacement drive, and want to know the best strategy to get the data off of the dubious drive with the best chance of saving as much as possible. There are some directories that are more important than others. However, I'm guessing that picking and choosing directories is going to reduce my chances of saving the whole thing. I would also have to mount it, dump a file listing, and then unmount it in order to be able to effectively prioritize directories. Adding in the fact that it's time-consuming to do this, I'm leaning away from this approach. I've considered just using dd, but I'm not sure how it would handle read errors or other problems that might prevent only certain parts of the data from being rescued, or which could be overcome with some retries, but not so many that they endanger other parts of the drive from being saved. I guess ideally it would do a single pass to get as much as possible and then go back to retry anything that was missed due to errors. Is it possible that copying more slowly — e.g. pausing every x MB/GB — would be better than just running the operation full tilt, for example to avoid any overheating issues? For the "where is your backup" crowd: this actually is my backup drive, but it also contains some non-critical and bulky stuff, like music, that aren't backups, i.e. aren't backed up. The drive has not exhibited any clear signs of failure other than this somewhat ominous sound. I did have to fsck a few errors recently — orphaned inodes, incorrect free blocks/inodes counts, inode bitmap differences, zero dtime on deleted inodes; about 20 errors in all. The filesystem of the partition is ext3.

    Read the article

  • How to tell nginx to honor backend's cache?

    - by ChocoDeveloper
    I'm using php-fpm with nginx as http server (I don't know much about reverse proxies, I just installed it and didn't touch anything), without Apache nor Varnish. I need nginx to understand and honor the http headers I send. I tried with this config (taken from the docs) but didn't work: /etc/nginx/nginx.conf: fastcgi_cache_path /var/lib/nginx/cache levels=1:2 keys_zone=website:10m inactive=10m; fastcgi_cache_key "$scheme$request_method$host$request_uri"; /etc/nginx/sites-available/website: server { fastcgi_cache website; #fastcgi_cache_valid 200 302 1h; #fastcgi_cache_valid 301 1d; #fastcgi_cache_valid any 1m; #fastcgi_cache_min_uses 1; #fastcgi_cache_use_stale error timeout invalid_header http_503; add_header X-Cache $upstream_cache_status; } I always get "MISS" and the cache dir is empty. If I uncomment the other directives, I get hit, but I don't want those "dumb" settings, I need to control them within my backend. For example, if my backend says "public, s-maxage=10", the cache should be considered stale after 10 secs. Instead, nginx will store it for 1h, because of these directives. I was thinking whether I should try proxy_cache, not sure what's the difference. In both fastcgi and proxy modules docs it says this: The cache honors backend's Cache-Control, Expires, and etc. since version 0.7.48, Cache-Control: private and no-store only since 0.7.66, though. Vary handling is not implemented. nginx version: nginx/1.1.19 Any thoughts? pd: I also have the reverse proxy that is offered by Symfony2 (which I turn off to use nginx's). The headers are interpreted correctly by it, so I think I'm doing it right.

    Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >