Search Results

Search found 7595 results on 304 pages for 'dev jadeja'.

Page 80/304 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• My sound stopped working today, how can I fix it?

  - by Oli

  This seems to be a problem with pulseaudio. I was logged in over VNC on my phone and started playing a video this caused X to crash (as sometimes happens). I restarted and suddenly the sound doesn't work. I have a Intel HDA/Realtek ALC889 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller alsamixer is detecting this just fine. PulseAudio doesn't detect this alsa device so is using auto_null as the default sink (logs below). When I properly kill PulseAudio (tell it not to auto-start) direct ALSA communication with the sound card works just fine. speaker-test, for example, works. So the hardware and ALSA layers are fine IMO. In the logs, it seems that the card might be "busy" but I really don't know how or why it would be now (and never before). Is there an ALSA lock file somewhere that it still there because of my crash? I just ran sudo fuser /dev/snd/* and saw this: oli@bert:~$ sudo fuser /dev/snd/* /dev/snd/controlC0: 1884 /dev/snd/pcmC0D0c: 1884m /dev/snd/timer: 1884 A look at the process list (ps aux | grep 1884) tells me process 1884 is arecord -c 1 -f S16_LE -r 8000 -t raw. No idea what this is or why it's running. When I try and kill arecord (as root), it just respawns and rebinds on the hardware. I'm in a very annoying situation where I don't know what is going on and don't know how to find out. I'm open to all suggestions to get this working again. Fire away. And here's what I get when I stop PA auto-loading, kill it and then start it with -vvvv. oli@bert:~$ pulseaudio -vvvvv I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted D: core-rtclock.c: Timer slack is set to 50 us. D: core-util.c: RealtimeKit worked. I: core-util.c: Successfully gained nice level -11. I: main.c: This is PulseAudio 0.9.21-63-gd3efa-dirty D: main.c: Compilation host: x86_64-pc-linux-gnu D: main.c: Compilation CFLAGS: -g -O2 -g -Wall -O3 -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option D: main.c: Running on host: Linux x86_64 2.6.38-rc3 #1 SMP Tue Feb 1 10:53:04 GMT 2011 D: main.c: Found 8 CPUs. I: main.c: Page size is 4096 bytes D: main.c: Compiled with Valgrind support: no D: main.c: Running in valgrind mode: no D: main.c: Running in VM: no D: main.c: Optimised build: yes D: main.c: All asserts enabled. I: main.c: Machine ID is 8310740c4729ef474fe5ecec4bbf5a6b. I: main.c: Session ID is 8310740c4729ef474fe5ecec4bbf5a6b-1297338553.571075-1050119523. I: main.c: Using runtime directory /home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-runtime. I: main.c: Using state directory /home/oli/.pulse. I: main.c: Using modules directory /usr/lib/pulse-0.9.21/modules. I: main.c: Running in system mode: no I: main.c: Fresh high-resolution timers available! Enjoy ol' chap! I: cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 I: svolume_mmx.c: Initialising MMX optimized functions. I: remap_mmx.c: Initialising MMX optimized remappers. I: svolume_sse.c: Initialising SSE2 optimized functions. I: remap_sse.c: Initialising SSE2 optimized remappers. I: sconv_sse.c: Initialising SSE2 optimized conversions. D: memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472 D: database-tdb.c: Opened TDB database '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-device-volumes.tdb' I: module-device-restore.c: Sucessfully opened database file '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-device-volumes'. I: module.c: Loaded "module-device-restore" (index: #0; argument: ""). D: database-tdb.c: Opened TDB database '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-stream-volumes.tdb' I: module-stream-restore.c: Sucessfully opened database file '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-stream-volumes'. I: module.c: Loaded "module-stream-restore" (index: #1; argument: ""). D: database-tdb.c: Opened TDB database '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-card-database.tdb' I: module-card-restore.c: Sucessfully opened database file '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-card-database'. I: module.c: Loaded "module-card-restore" (index: #2; argument: ""). I: module.c: Loaded "module-augment-properties" (index: #3; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-udev-detect.so': success D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes D: module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes I: module-udev-detect.c: Found 1 cards. I: module.c: Loaded "module-udev-detect" (index: #4; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-bluetooth-discover.so': success D: dbus-util.c: Successfully connected to D-Bus system bus ba7c9a1f90b3d49d930bca2100000015 as :1.62 D: bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired D: bluetooth-util.c: Bluetooth daemon is apparently not available. I: module.c: Loaded "module-bluetooth-discover" (index: #5; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-esound-protocol-unix.so': success I: module.c: Loaded "module-esound-protocol-unix" (index: #6; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #7; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-gconf.so': success I: module.c: Loaded "module-gconf" (index: #8; argument: ""). I: module-default-device-restore.c: Saved default sink 'auto_null' not existant, not restoring default sink setting. I: module-default-device-restore.c: Saved default source 'auto_null.monitor' not existant, not restoring default source setting. I: module.c: Loaded "module-default-device-restore" (index: #9; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #10; argument: ""). D: module-always-sink.c: Autoloading null-sink as no other sinks detected. I: sink.c: Created sink 0 "auto_null" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center I: sink.c: device.description = "Dummy Output" I: sink.c: device.class = "abstract" I: sink.c: device.icon_name = "audio-card" D: core-subscribe.c: Dropped redundant event due to change event. I: source.c: Created source 0 "auto_null.monitor" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center I: source.c: device.description = "Monitor of Dummy Output" I: source.c: device.class = "monitor" I: source.c: device.icon_name = "audio-input-microphone" D: module-null-sink.c: Thread starting up I: module.c: Loaded "module-null-sink" (index: #11; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'"). I: module.c: Loaded "module-always-sink" (index: #12; argument: ""). I: module.c: Loaded "module-intended-roles" (index: #13; argument: ""). D: module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds. I: module.c: Loaded "module-suspend-on-idle" (index: #14; argument: ""). I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1" D: module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session1 I: module.c: Loaded "module-console-kit" (index: #15; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #16; argument: ""). D: dbus-util.c: Successfully connected to D-Bus session bus efbffc6788fad56cfd64d40c00000018 as :1.182 D: main.c: Got org.pulseaudio.Server! I: main.c: Daemon startup complete. I: client.c: Created 1 "Native client (UNIX socket client)" I: client.c: Created 2 "Native client (UNIX socket client)" D: protocol-native.c: Protocol version: remote 16, local 16 I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1 D: protocol-native.c: SHM possible: yes D: protocol-native.c: Negotiated SHM: yes D: protocol-native.c: Protocol version: remote 16, local 16 I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1 D: protocol-native.c: SHM possible: yes D: protocol-native.c: Negotiated SHM: yes D: module-augment-properties.c: Looking for .desktop file for gnome-volume-control-applet D: module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon D: core-subscribe.c: Dropped redundant event due to change event. I: module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ... D: sink.c: Suspend cause of sink auto_null is 0x0004, suspending Note the one section that seems to find the hardware but says it's busy (no idea if this is relevant). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-udev-detect.so': success D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes D: module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes I: module-udev-detect.c: Found 1 cards.

  Read the article

• 2 drives, slow software RAID1 (md)

  - by bart613

  Hello, I've got a server from hetzner.de (EQ4) with 2* SAMSUNG HD753LJ drives (750G 32MB cache). OS is CentOS 5 (x86_64). Drives are combined together into two RAID1 partitions: /dev/md0 which is 512MB big and has only /boot partitions /dev/md1 which is over 700GB big and is one big LVM which hosts other partitions Now, I've been running some benchmarks and it seems like even though exactly the same drives, speed differs a bit on each of them. # hdparm -tT /dev/sda /dev/sda: Timing cached reads: 25612 MB in 1.99 seconds = 12860.70 MB/sec Timing buffered disk reads: 352 MB in 3.01 seconds = 116.80 MB/sec # hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 25524 MB in 1.99 seconds = 12815.99 MB/sec Timing buffered disk reads: 342 MB in 3.01 seconds = 113.64 MB/sec Also, when I run eg. pgbench which is stressing IO quite heavily, I can see following from iostat output: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 231.40 0.00 298.00 0.00 9683.20 32.49 0.17 0.58 0.34 10.24 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 231.40 0.00 298.00 0.00 9683.20 32.49 0.17 0.58 0.34 10.24 sdb 0.00 231.40 0.00 301.80 0.00 9740.80 32.28 14.19 51.17 3.10 93.68 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 231.40 0.00 301.80 0.00 9740.80 32.28 14.19 51.17 3.10 93.68 md1 0.00 0.00 0.00 529.60 0.00 9692.80 18.30 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.60 0.00 4.80 8.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 529.00 0.00 9688.00 18.31 24.51 49.91 1.81 95.92 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 152.40 0.00 330.60 0.00 5176.00 15.66 0.19 0.57 0.19 6.24 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 152.40 0.00 330.60 0.00 5176.00 15.66 0.19 0.57 0.19 6.24 sdb 0.00 152.40 0.00 326.20 0.00 5118.40 15.69 19.96 55.36 3.01 98.16 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 152.40 0.00 326.20 0.00 5118.40 15.69 19.96 55.36 3.01 98.16 md1 0.00 0.00 0.00 482.80 0.00 5166.40 10.70 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 482.80 0.00 5166.40 10.70 30.19 56.92 2.05 99.04 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 181.64 0.00 324.55 0.00 5445.11 16.78 0.15 0.45 0.21 6.87 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 181.64 0.00 324.55 0.00 5445.11 16.78 0.15 0.45 0.21 6.87 sdb 0.00 181.84 0.00 328.54 0.00 5493.01 16.72 18.34 61.57 3.01 99.00 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 181.84 0.00 328.54 0.00 5493.01 16.72 18.34 61.57 3.01 99.00 md1 0.00 0.00 0.00 506.39 0.00 5477.05 10.82 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 506.39 0.00 5477.05 10.82 28.77 62.15 1.96 99.00 And this is completely getting me confused. How come two exactly the same specced drives have such a difference in write speed (see util%)? I haven't really paid attention to those speeds before, so perhaps that something normal -- if someone could confirm I would be really grateful. Otherwise, if someone have seen such behavior again or knows what is causing such behavior I would really appreciate answer. I'll also add that both "smartctl -a" and "hdparm -I" output are exactly the same and are not indicating any hardware problems. The slower drive was changed already two times (to new ones). Also I asked to change the drives with places, and then sda were slower and sdb quicker (so the slow one was the same drive). SATA cables were changed two times already.

  Read the article

• Process not Listed by PS or in /proc/

  - by Hammer Bro.

  I'm trying to figure out how to operate a rather large Java program, 'prog'. If I go to its /bin/ dir and configure its setenv.sh and prog.sh to use local directories and my current user account. Then I try to run it via "./prog.sh start". Here are all the relevant bits of prog.sh: USER=(my current account) _CMD="/opt/jdk/bin/java -server -Xmx768m -classpath "${CLASSPATH}" -jar "${DIR}/prog.jar"" case "${ACTION}" in start) nohup su ${USER} -c "exec ${_CMD} >>${_LOGFILE} 2>&1" >/dev/null & echo $! >${_PID} echo "Prog running. PID="`cat ${_PID}` ;; stop) PID=`cat ${_PID} 2>/dev/null` echo "Shutting down prog: ${PID} kill -QUIT ${PID} 2>/dev/null kill ${PID} 2>/dev/null kill -KILL ${PID} 2>/dev/null rm -f ${_PID} echo "STOPPED `date`" >>${_LOGFILE} ;; When I actually do ./prog.sh start, it starts. But I can't find it at all on the process list. Nor can I kill it manually, using the same command the shell script uses. But I can tell it's running, because if I do ./prog.sh stop, it stops (and some temporary files elsewhere clean themselves out). ./prog.sh start Prog running. PID=1234 ps eaux | grep 1234 ps eaux | grep -i prog.jar ps eaux >> pslist.txt (It's not there either by PID or any clear name I can find: prog, java or jar.) cd /proc/1234/ -bash: cd: /proc/1234/: No such file or directory kill -QUIT 1234 kill 1234 kill -KILL 1234 -bash: kill: (1234) - No such process ./prog.sh stop Shutting down prog: 1234 As far as I can tell, the process is running yet not in any way listed by the system. I can't find it in ps or /proc/, nor can I kill it. But the shell script can still stop it properly. So my question is, how can something like this happen? Is the process supremely hidden, actually unlisted, or am I just missing it in some fashion? I'm trying to figure out what makes this program tick, and I can barely prove that it's ticking! Edit: ps eu | grep prog.sh (after having restarted; so random PID) 50038 19381 0.0 0.0 4412 632 pts/3 S+ 16:09 0:00 grep prog.sh HOSTNAME=machine.server.com TERM=vt100 SHELL=/bin/bash HISTSIZE=1000 SSH_CLIENT=::[STUFF] 1754 22 CVSROOT=:[DIR] SSH_TTY=/dev/pts/3 ANT_HOME=/opt/apache-ant-1.7.1 USER=[USER] LS_COLORS=[COLORS] SSH_AUTH_SOCK=[DIR] KDEDIR=/usr MAIL=[DIR] PATH=[DIRS] INPUTRC=/etc/inputrc PWD=[PWD] JAVA_HOME=/opt/jdk1.6.0_21 LANG=en_US.UTF-8 SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass M2_HOME=/opt/apache-maven-2.2.1 SHLVL=1 HOME=[~] LOGNAME=[USER] SSH_CONNECTION=::[STUFF] LESSOPEN=|/usr/bin/lesspipe.sh %s G_BROKEN_FILENAMES=1 _=/bin/grep OLDPWD=[DIR] I just realized that the stop) part of prog.sh isn't actually a guarantee that the process it claims to be stopping is running -- it just tries to kill the PID and suppresses all output then deletes the temporary file and manually inserts STOPPED into the log file. So I'm no longer so certain that the process is always running when I ps for it, although the code sample above indicates that it at least runs erratically. I'll continue looking into this undocumented behemoth when I return to work tomorrow.

  Read the article

• Oracle Linux 6 DVDs Now Available

  - by sergio.leunissen

  On Sunday 6 February 2011, Oracle Linux 6 was released on the Unbreakable Linux Network for customers with an Oracle Linux support subscription. Shortly after that, the Oracle Linux 6 RPMs were made available on our public yum server. Today we published the installation DVD images on edelivery.oracle.com/linux. Oracle Linux 6 is free to download, install and use. The full release notes are here, but similar to my recent post about Oracle Linux 5.6, I wanted to highlight a few items about this release. Unbreakable Enterprise Kernel As is the case with Oracle Linux 5.6, the default installed kernel on x86_64 platform in Oracle Linux 6 is the Unbreakable Enterprise Kernel. If you haven't already, I highly recommend you watch the replay of this webcast by Chris Mason on the performance improvements made in this kernel. # uname -r 2.6.32-100.28.5.el6.x86_64 The Unbreakable Enterprise Kernel is delivered via the package kernel-uek: [root@localhost ~]# yum info kernel-uek ... Installed Packages Name : kernel-uek Arch : x86_64 Version : 2.6.32 Release : 100.28.5.el6 Size : 84 M Repo : installed From repo : anaconda-OracleLinuxServer-201102031546.x86_64 Summary : The Linux kernel URL : http://www.kernel.org/ License : GPLv2 Description: The kernel package contains the Linux kernel (vmlinuz), the core of : any Linux operating system. The kernel handles the basic functions : of the operating system: memory allocation, process allocation, : device input and output, etc. ext4 file system The ext4 or fourth extended filesystem replaces ext3 as the default filesystem in Oracle Linux 6. # mount /dev/mapper/VolGroup-lv_root on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/sda1 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) Red Hat compatible kernel Oracle Linux 6 also includes a Red Hat compatible kernel built directly from RHEL source. It's already installed, so booting it is a matter of editing /etc/grub.conf # rpm -qa | grep kernel-2.6.32 kernel-2.6.32-71.el6.x86_64 Oracle Linux 6 no longer includes a Red Hat compatible kernel with Oracle bug fixes. The only Red Hat compatible kernel included is the one built directly from RHEL source. Yum-only access to Unbreakable Linux Network (ULN) Oracle Linux 6 uses yum exclusively for access to Unbreakable Linux Network. To register your system with ULN, use the following command: # uln_register No Itanium Support Oracle Linux 6 is not supported on the Itanium (ia64) platform. Next Steps Read the release notes Download Oracle Linux 6 for free Discuss on the Oracle Linux forum

  Read the article

• USB packets - receive wrong data

  - by regorianer

  i have a little python script which shows me the packets of an enocean device and does some events depending on the packet type. unfortunately it doesn't work because i'm getting wrong packets. Parts of the python script (used pySerial): Blockquote ser = serial.Serial('/dev/ttyUSB1',57600,bytesize = serial.EIGHTBITS,timeout = 1, parity = serial.PARITY_NONE , rtscts = 0) print 'clearing buffer' s = ser.read(10000) print 'start read' while 1: s = ser.read(1) for character in s: sys.stdout.write(" %s" % character.encode('hex')) print 'end' ser.close() output baudrate 57600: e0 e0 00 e0 00 e0 e0 e0 e0 e0 00 e0 e0 00 00 00 00 00 00 00 e0 e0 e0 00 00 00 00 e0 e0 e0 00 00 e0 e0 e0 e0 e0 00 e0 00 e0 e0 e0 e0 e0 00 e0 e0 00 00 00 00 00 00 e0 e0 e0 00 00 00 00 e0 e0 e0 00 00 e0 e0 e0 output baudrate 9600: a5 5a 0b 05 10 00 00 00 00 15 c4 56 20 6f a5 5a 0b 05 00 00 00 00 00 15 c4 56 20 5f linux terminal baudrate 57600: $stty -F /dev/ttyUSB1 57600 $stty < /dev/ttyUSB1 speed 57600 baud; line = 0; eof = ^A; min = 0; time = 0; -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke $while (true) do cat -A /dev/ttyUSB1 ; done myfile $hexdump -C myfile 00000000 4d 2d 60 4d 2d 60 5e 40 4d 2d 60 5e 40 4d 2d 60 |M-M-^@M-^@M-| 00000010 4d 2d 60 4d 2d 60 4d 2d 60 4d 2d 60 5e 40 4d 2d |M-M-M-M-^@M-| 00000020 60 4d 2d 60 5e 40 5e 40 5e 40 5e 40 5e 40 5e 40 |M-^@^@^@^@^@^@| 00000030 5e 40 4d 2d 60 4d 2d 60 4d 2d 60 5e 40 5e 40 5e |^@M-M-M-`^@^@^| 00000040 40 5e 40 4d 2d 60 4d 2d 60 4d 2d 60 |@^@M-M-M-`| 0000004c linux terminal baudrate 9600: $hexdump -C myfile2 00000000 5e 40 5e 55 4d 2d 44 56 30 4d 2d 3f 5e 40 5e 40 |^@^UM-DV0M-?^@^@| 00000010 5e 55 4d 2d 44 56 20 5f |^UM-DV _| 00000018 the specification says: 0x55 sync byte 1st 0xNNNN data length bytes (2 bytes) 0x07 opt length byte 0x01 type byte CRC, data, opt data und nochmal CRC but I'm not getting this packet structure. The output of the python script differs from the one I get via the terminal. I also wrote the python part with C, but the output is the same as with python As the USB receiver a BSC-BoR USB Receiver/Sender is used The EnOcean device is a simple button

  Read the article

• How to use Hybrid Graphic Switch on Sony Vaio Z?

  - by Travis R

  I got it to install nicely and it's all working, but I don't know which graphics card is being used nor how to switch between. I tried installing the official Nvidia drivers, but then I could not boot up my computer afterwards so I have not installed them again after doing a reinstall of Ubuntu. PS, if you have a grub install failure during install, the key is to tell it where to install the bootloader at the very beginning of the installation, on your partition selection screen (choose dev/mapper, not the /dev/sda it defaults to).

  Read the article

• Problems with making a bootable USB Drive on a Mac

  - by Jason

  I am following this http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx to create a Bootable USB Drive for me Mac and this is the output I get on step 8. new-host:~ Jason$ sudo dd if=/Users/Jason/Desktop/ubuntu-12.04-desktop-amd64.dmg of=/dev/rdisk1s2 bs=1m dd: /dev/rdisk1s2: Invalid argument 691+1 records in 691+0 records out 724566016 bytes transferred in 164.544659 secs (4403461 bytes/sec) What should I do?

  Read the article

• How to correctly partition usb flash drive and which filesystem to choose considering wear leveling?

  - by random1

  Two problems. First one: how to partition the flash drive? I shouldn't need to do this, but I'm no longer sure if my partition is properly aligned since I was forced to delete and create a new partition table after gparted complained when I tried to format the drive from FAT to ext4. The naive answer would be to say "just use default and everything is going to be alright". However if you read the following links you'll know things are not that simple: https://lwn.net/Articles/428584/ and http://linux-howto-guide.blogspot.com/2009/10/increase-usb-flash-drive-write-speed.html Then there is also the issue of cylinders, heads and sectors. Currently I get this: $sfdisk -l -uM /dev/sdd Disk /dev/sdd: 30147 cylinders, 64 heads, 32 sectors/track Warning: The partition table looks like it was made for C/H/S=*/255/63 (instead of 30147/64/32). For this listing I'll assume that geometry. Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End MiB #blocks Id System /dev/sdd1 1 30146 30146 30869504 83 Linux $fdisk -l /dev/sdd Disk /dev/sdd: 31.6 GB, 31611420672 bytes 255 heads, 63 sectors/track, 3843 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00010c28 So from my current understanding I should align partitions at 4 MiB (currently it's at 1 MiB). But I still don't know how to set the heads and sectors properly for my device. Second problem: file system. From the benchmarks I saw ext4 provides the best performance, however there is the issue of wear leveling. How can I know that my Transcend JetFlash 700's microcontroller provides for wear leveling? Or will I just be killing my drive faster? I've seen a lot of posts on the web saying don't worry the newer drives already take care of that. But I've never seen a single piece of backed evidence of that and at some point people start mixing SSD with USB flash drives technology. The safe option would be to go for ext2, however a serious of tests that I performed showed horrible performance!!! These values are from a real scenario and not some synthetic test: 42 files: 3,429,415,284 bytes copied to flash drive original fat32: 15.1 MiB/s ext4 after new partition table: 10.2 MiB/s ext2 after new partition table: 1.9 MiB/s Please read the links that I posted above before answering. I would also be interested in answers backed up with some references because a lot is said and re-said but then it lacks facts. Thank you for the help.

  Read the article

• USB drives not recognized all of a sudden (module usb_storage not loading)

  - by Siddharth

  I am very close to the solution, just need to know how to get usb-storage to load I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

  Read the article

• How to Create a bootable Ubuntu USB flash drive from terminal

  - by Avinash Raj

  Is there any possibility to create a Ubuntu USB flash drive from terminal without using any third-party applications like YUMI,Unetbootin,etc. I tried to create a bootable ubuntu flash drive with dd method, sudo umount /dev/sdb sudo dd if=/path/to/ubuntu.iso of=/dev/sdb bs=1M It create files on the USB disk,but when i try to boot the usb disk it says Operating System Not Found error. Any help will be appreciated!

  Read the article

• Mounting a drive in Ubuntu 9.10 (Karmic Koala)

  - by morpheous

  I have just installed Ubuntu on a machine that previously had XP installed on it. The machine has 2 HDD (hard disk drives). I opted to install Ubuntu completely over XP. I am new to Linux, and I am still learning how to navigate teh file structure. However, AFAICT), there is only one drive. I want to be able to store programs etc on the first drive, and store data (program output etc) on the second drive. It appears Ubuntu is not aware that I have 2 drives (on XP, these were drives C and D). How can I mount the second drive (ideally, I want to do this automatically on login, so that the drive is available to me whenever I login - withou manual intervention from me) In XP, I could refer to files on a specific drive by prefixing with the drive letter (e.g. c:\foobar.cpp and d:\foobar.dat). I suspect the notation on ubuntu is different. How may I specify specific files on different drives? Last but notbthe least (a bit unrelated to previous questions). This relates to direcory structure again. I am a developer (C++ for desktops and PHP for websites), I want to install the following apps/ libraries. i). Apache 2.2 ii). PHP 5.2.11 iii). MySQL (5.1) iv). SVN v). Netbeans vi). C++ development tools (gcc, gdb, emacs etc) vii). QT toolkit viii). Some miscellaeous scientific software (e.g. www.r-project.org, www.gnu.org/software/octave/) I would be grateful if a someone can recommend a directory layout for these applications. Regarding development, I would also be grateful if someone could point out where to store my project and source files i.e: (i) *.cpp, *.hpp, *.mak files for cpp projects (ii) individual websites On my XP machine the layout for C++ dev was like this: c:\dev\devtools (common libs and headers etc) c:\dev\workarea (root folder for projects) c:\dev\workarea\c++ (c++ projects) c:\dev\workarea\websites (web projects) I would like to create a similar folder structure on the linux machine, but its not clear whether to place these folders under /, /usr, /home or swomewhere else (there seems to be abffling number of choices, so I want to get it "right" first time - i.e having a directory structure that most developer use, so it is easier when communicating with other ubuntu/linux developers)

  Read the article

• Keeping up with New Releases

  - by Jeremy Smyth

  You can keep up with the latest developments in MySQL software in a number of ways, including various blogs and other channels. However, for the most correct (if somewhat dry and factual) information, you can go directly to the source.  Major Releases  For every major release, the MySQL docs team creates and maintains a "nutshell" page containing the significant changes in that release. For the current GA release (whatever that is) you'll find it at this location: https://dev.mysql.com/doc/mysql/en/mysql-nutshell.html  At the moment, this redirects to the summary notes for MySQL 5.6. The notes for MySQL 5.7 are also available at that website, at the URL http://dev.mysql.com/doc/refman/5.7/en/mysql-nutshell.html, and when eventually that version goes GA, it will become the currently linked notes from the URL shown above. Incremental Releases  For more detail on each incremental release, you can have a look at the release notes for each revision. For MySQL 5.6, the release notes are stored at the following location: http://dev.mysql.com/doc/relnotes/mysql/5.6/en/ At the time I write this, the topmost entry is a link for MySQL 5.6.15. Each linked page shows the changes in that particular version, so if you are currently running 5.6.11 and are interested in what bugs were fixed in versions since then, you can look at each subsequent release and see all changes in glorious detail. One really clever thing you can do with that site is do an advanced Google search to find exactly when a feature was released, and find out its release notes. By using the preceding link in a "site:" directive in Google, you can search only within those pages for an entry. For example, the following Google search shows pages within the release notes that reference the --slow-start-timeout option:     site:http://dev.mysql.com/doc/relnotes/mysql/ "--slow-start-timeout" By running that search, you can see that the option was added in MySQL 5.6.5 and also rolled into MySQL 5.5.20.   White Papers Also, with each major release you can usually find a white paper describing what's new in that release. In MySQL 5.6 there was a "What's new" whitepaper at this location: http://www.mysql.com/why-mysql/white-papers/whats-new-mysql-5-6/ You'll find other white papers at: http://www.mysql.com/why-mysql/white-papers/ Search the page for "5.6" to see any papers dealing specificallly with that version.

  Read the article

• Puppet - Possible to use software design patterns in modules?

  - by Mike Purcell

  As I work with puppet, I find myself wanting to automate more complex setups, for example vhosts for X number of websites. As my puppet manifests get more complex I find it difficult to apply the DRY (don't repeat yourself) principle. Below is a simplified snippet of what I am after, but doesn't work because puppet throws various errors depending up whether I use classes or defines. I'd like to get some feed back from some seasoned puppetmasters on how they might approach this solution. # site.pp import 'nodes' # nodes.pp node nodes_dev { $service_env = 'dev' } node nodes_prod { $service_env = 'prod' } import 'nodes/dev' import 'nodes/prod' # nodes/dev.pp node 'service1.ownij.lan' inherits nodes_dev { httpd::vhost::package::site { 'foo': } httpd::vhost::package::site { 'bar': } } # modules/vhost/package.pp class httpd::vhost::package { class manage($port) { # More complex stuff goes here like ensuring that conf paths and uris exist # As well as log files, which is I why I want to do the work once and use many notify { $service_env: } notify { $port: } } define site { case $name { 'foo': { class 'httpd::vhost::package::manage': port => 20000 } } 'bar': { class 'httpd::vhost::package::manage': port => 20001 } } } } } That code snippet gives me a Duplicate declaration: Class[Httpd::Vhost::Package::Manage] error, and if I switch the manage class to a define, and attempt to access a global or pass in a variable common to both foo and bar, I get a Duplicate declaration: Notify[dev] error. Any suggestions how I can implement the DRY principle and still get puppet to work? -- UPDATE -- I'm still having a problem trying to ensure that some of my vhosts, which may share a parent directory, are setup correctly. Something like this: node 'service1.ownij.lan' inherits nodes_dev { httpd::vhost::package::site { 'foo_sitea': } httpd::vhost::package::site { 'foo_siteb': } httpd::vhost::package::site { 'bar': } } What I need to happen is that sitea and siteb have the same parent "foo" folder. The problem I am having is when I call a define to ensure the "foo" folder exists. Below is the site define as I have it, hopefully it will make sense what I am trying to accomplish. class httpd::vhost::package { File { owner => root, group => root, mode => 0660 } define site() { $app_parts = split($name, '[_]') $app_primary = $app_parts[0] if ($app_parts[1] == '') { $tpl_path_partial_app = "${app_primary}" $app_sub = '' } else { $tpl_path_partial_app = "${app_primary}/${app_parts[1]}" $app_sub = $app_parts[1] } include httpd::vhost::log::base httpd::vhost::log::app { $name: app_primary => $app_primary, app_sub => $app_sub } } } class httpd::vhost::log { class base { $paths = [ '/tmp', '/tmp/var', '/tmp/var/log', '/tmp/var/log/httpd', "/tmp/var/log/httpd/${service_env}" ] file { $paths: ensure => directory } } define app($app_primary, $app_sub) { $paths = [ "/tmp/var/log/httpd/${service_env}/${app_primary}", "/tmp/var/log/httpd/${service_env}/${app_primary}/${app_sub}" ] file { $paths: ensure => directory } } } The include httpd::vhost::log::base works fine, because it is "included", which means it is only implemented once, even though site is called multiple times. The error I am getting is: Duplicate declaration: File[/tmp/var/log/httpd/dev/foo]. I looked into using exec, but not sure this is the correct route, surely others have had to deal with this before and any insight is appreciated as I have been grappling with this for a few weeks. Thanks.

  Read the article

• Is Unix/Linux adoption a measure of developer skill? [closed]

  - by adeptsage

  Is Linux/Unix based OS adoption for development (or recreation) a rough measure of the awareness, adaptability and/or skill of a developer, after considering factors like learning curve for effective code testing via the CLI, basic scripting, tweaking, etc. I have no intention of starting flame wars between Windows and Linux as better dev environments, and personal choice of OSes for dev, but what i do wish to know is that - will the level of adaptability of a person who uses a Unix based system be defined by the fact that he programs on a Unix based OS?

  Read the article

• Fedora 13 post security update boot problem

  - by Alex

  Hello. About a month ago I installed a security update that had new Kernek 2.6.34.x from 2.6.33.x), this is when the problem occurred for the first time. After the install my computer would not boot at all, black screen without any visible hard drive activity (I gave it good 30 minutes on black screen, before took actions)... I poped in installation DVD and went in rescue mode to change back the boot option to old kernel (was just a guess where the problem was). After restart computer loaded just file, took a long time for it to start because of SELinux targeted policy relabel is required. Relabeling could take very long time depending on file size. I assumed that the update got messed up somehow and continued working with modified boot option. Couple of days ago, there was another kernel update. I installed it and same problem as before. This rules out corrupted update theory... Black screen right after 'BIOS' screen before OS gets loaded. I had to rescue system again... Below is copy of my grub.conf file. I am fairly new to LINUX (couple of years of experience), mostly development and basic config... nothing crazy. # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/mapper/vg_obalyuk-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sda default=2 timeout=0 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.34.6-54.fc13.i686.PAE) root (hd0,0) kernel /vmlinuz-2.6.34.6-54.fc13.i686.PAE ro root=/dev/mapper/vg_obalyuk-lv_root rd_LVM_LV=vg_obalyuk/lv_root rd_LVM_LV=vg_obalyuk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet initrd /initramfs-2.6.34.6-54.fc13.i686.PAE.img title Fedora (2.6.34.6-47.fc13.i686.PAE) root (hd0,0) kernel /vmlinuz-2.6.34.6-47.fc13.i686.PAE ro root=/dev/mapper/vg_obalyuk-lv_root rd_LVM_LV=vg_obalyuk/lv_root rd_LVM_LV=vg_obalyuk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet initrd /initramfs-2.6.34.6-47.fc13.i686.PAE.img title Fedora (2.6.33.8-149.fc13.i686.PAE) root (hd0,0) kernel /vmlinuz-2.6.33.8-149.fc13.i686.PAE ro root=/dev/mapper/vg_obalyuk-lv_root rd_LVM_LV=vg_obalyuk/lv_root rd_LVM_LV=vg_obalyuk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet initrd /initramfs-2.6.33.8-149.fc13.i686.PAE.img I like my system to be up to date... Let me know if I can post any other files that can be of help. Has anyone else had this problem? Does anyone has any ideas how to fix this problem? p.s. Anything helps, you ppl are great! thx for ur time.

  Read the article

• USB drives not recognized all of a sudden (usb_storage not loaded lsmod does not report usb_storage)

  - by Siddharth

  I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

  Read the article

• execute script with sudo after login

  - by Kalamalka Kid

  i need to execute the following commands AFTER login. sudo hdparm -y /dev/disk/by-uuid/443AFBAD7FE50945 sudo hdparm -y /dev/disk/by-uuid/7ABB49654B799D40 (trying to edit rc.local does not work nor does using hdparm.conf because as soon as I log in the disks start up again). I have tried numerous things like bash files and autossh entries in the startup applications with no luck because sudo is involved.

  Read the article

• Ubuntu unattended-upgrades stops apache

  - by Robbie

  This morning i was alerted to the fact that both apache instances serving my app were not responding to requests from my load balancer. I attempted apachectl restart and it said apache was not running. So, i started apache on both instances and got the service up again. I then followed the logs and worked out that both had performed upgrades via the unattended-upgrades package moments before they stopped responding. /var/log/unattended-upgrades/unattended-upgrades.log 2013-07-02 06:30:51,875 INFO Starting unattended upgrades script 2013-07-02 06:30:51,875 INFO Allowed origins are: ['o=Ubuntu,a=precise-security'] 2013-07-02 06:33:57,771 INFO Packages that are upgraded: accountsservice apache2 apache2-mpm-prefork apache2-utils apache2.2-bin apache2.2-common apparmor apport apt apt-transport-https apt-utils bind9-host binutils dbus dnsutils gnupg gpgv isc-dhcp-client isc-dhcp-common krb5-locales libaccountsservice0 libapt-inst1.4 libapt-pkg4.12 libbind9-80 libc-bin libc-dev-bin libc6 libc6-dev libcurl3-gnutls libdbus-1-3 libdbus-glib-1-2 libdns81 libdrm-intel1 libdrm-nouveau1a libdrm-radeon1 libdrm2 libexpat1 libfreetype6 libgc1c2 libgnutls-dev libgnutls-openssl27 libgnutls26 libgnutlsxx27 libisc83 libisccc80 libisccfg82 liblwres80 libruby1.8 libx11-6 libx11-data libxcb1 libxext6 libxml2 linux-firmware linux-image-virtual linux-libc-dev linux-virtual multiarch-support openssl perl perl-base perl-modules python-apport python-crypto python-keyring python-problem-report python-software-properties ri1.8 ruby1.8 ruby1.8-dev sudo tzdata update-manager-core 2013-07-02 06:33:57,772 INFO Writing dpkg log to '/var/log/unattended-upgrades/unattended-upgrades-dpkg_2013-07-02_06:33:57.772399.log' 2013-07-02 06:36:10,584 INFO All upgrades installed I'm running Ubuntu 12.04 on Amazon EC2 servers. I have unattended-upgrades installed and configured as follows: /etc/apt/apt.conf.d/50unattended-upgrades // Automatically upgrade packages from these (origin:archive) pairs Unattended-Upgrade::Allowed-Origins { "${distro_id}:${distro_codename}-security"; // "${distro_id}:${distro_codename}-updates"; // "${distro_id}:${distro_codename}-proposed"; // "${distro_id}:${distro_codename}-backports"; }; // List of packages to not update Unattended-Upgrade::Package-Blacklist { }; /etc/apt/apt.conf.d/20auto-upgrades APT::Periodic::Update-Package-Lists "1"; APT::Periodic::Unattended-Upgrade "1"; I've struggled to find documentation about what happens to running processes during an upgrade. - Is this expected behaviour? Or should unattended-upgrades restart apache after upgrading it? - What can I do to ensure apache is restarted correctly? Should I just blacklist the apache package?

  Read the article

• Créer des QR Codes avec Zxing et Java 2D en 5 minutes, par Thierry Leriche-Dessirier

  Bonjour, Je vous propose un article intitulé "Créer des QR Codes avec Zxing et Java 2D, en 5 minutes". Ce petit article s'intéresse à la génération de QR codes en Java. Nous allons voir qu'il est relativement simple de créer une matrice de modules à l'aide de Zxing puis d'en faire une jolie image avec Java 2D. L'article est visible ici : http://thierry-leriche-dessirier.dev...-java2d-5-min/ Et je vous invite aussi à lire mes autres articles ici : http://thierry-leriche-dessirier.dev...#page_articles ...

  Read the article

• Windows Phone 8 SDK

  - by Nikita Polyakov

  Yesterday, the new Windows Phone 8 was announced! Find out more about the cool new OS and the new devices supporting it at www.WindowsPhone.com Today at BUILD conference in Redmond, WA – Microsoft has announced general availability of the Developer SDK for Windows Phone 8! Get the SDK and more info in the dev center: http://dev.WindowsPhone.com Also watch the Windows Phone Developer blog. Also this is the best time to join the Windows Phone Store for just for $8 for next 8 days.

  Read the article

• Mounting a usb floppy disk drive in Ubuntu 11.04

  - by Jocky B

  I have tried to mount my usb floppy disk drive in 11.04 Natty. So far I have managed to use the udisks --mount/dev/sdf command in terminal, but get a message that I have not stated a filetype "john@john-desktop:~$ udisks --mount /dev/sdf Mount failed: Error mounting: mount: you must specify the filesystem type" This is the result I get when trying to mount the usb floppy disk drive. Anyone know how to proceed Cheers

  Read the article

• Swap is encrypted or not?

  - by Abhijit Navale

  I selected to encrypt home folder while install lubuntu 12.10 (64 bit) But after that 'sometimes' I get error that can not find /dev/mapper/cryptswap1 wait for mount or cancel at slpash screen. It then start the lubuntu without any problem. If i do sudo blkid | grep swap [sudo] password for abhijit: /dev/mapper/cryptswap1: UUID="fce3ef14-a9c6-45ac-81f5-18ff415851b0" TYPE="swap" That means swap is encrypted. But if i go to gparted it shows unknown partition with red exclamation mark for swap.

  Read the article

• GUVCVIEW errors

  - by Brian Snapp

  I had GUVCVIEW working once before. it suddenly quit working. This is the error I receive........ bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) video device: /dev/video0 /dev/video0 - device 1 Init. Intergrated Webcam (location: usb-0000:00:1a.7-2) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1024, height = 768 } Time interval between frame: 1/9, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/9, 1/5, checking format: 1196444237 Format unavailable: 1196444237. Init v4L2 failed !! Init video returned -2 trying minimum setup ... video device: /dev/video0 /dev/video0 - device 1 Init. Intergrated Webcam (location: usb-0000:00:1a.7-2) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1024, height = 768 } Time interval between frame: 1/9, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/9, 1/5, checking format: 1448695129 Requested Format unavailable: get width 640 height 480 vid:0c45 pid:6410 driver:uvcvideo (guvcview:4079): Gtk-CRITICAL **: gtk_hscale_new_with_range: assertion `min < max' failed (guvcview:4079): Gtk-CRITICAL **: gtk_scale_set_draw_value: assertion `GTK_IS_SCALE (scale)' failed Segmentation fault I suppose the problem lies in the fact, that I cannot locate a configuration file to edit. Any help in where this file may lie? I have tried searching for any/everything related to guvcview, and have had zero success. Thank you for taking the time to read this, and hopefully providing a solution..

  Read the article

• DVD ROM is not working

  - by Cyril N.

  (note: I don't know in which StackExchange site to put this question, I'll thank the moderator that will move it to a more appropriate place, if there is a S.E. available for my question). I have a DVD RW drive that is well listed in the bios, and if no CD is in, it is also present in the "My Computer" of my Fedora 16. But when I put a disc on it, the icon disapear from "My Computer", and I can not do anything with this ! (Like erasing a RW disc). I'd like to boot a Fedora 17 Live CD image. I burned it on an other computer but when I try to run it in bios, nothing is done and I'm redirected to Grub of my HD. The command cdrecord -scanbus shows this : wodim: Warning: controller returns wrong size for CD capabilities page. wodim: Cannot get CD capabilities data. 6,1,0 601) 'HD-DT%ST' 'DVD%RAM G@22NP20' '1&04' Removable CD-ROM And when I try to mount manually the disc, I got this error : mount: block device /dev/sr0 is write-protected, mounting read-only mount: /dev/sr0: can't read superblock Here's a paste of dmesg | grep sr0 : [ 5.161265] sr0: scsi-1 drive [ 5.161621] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 834.545978] sr0: Hmm, seems the drive doesn't support multisession CD's [ 841.731194] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 842.021640] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 842.021652] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 842.021662] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 842.021672] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 842.021688] end_request: I/O error, dev sr0, sector 0 [ 842.021697] Buffer I/O error on device sr0, logical block 0 [ 842.023715] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.048203] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.048211] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.048219] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.048234] end_request: I/O error, dev sr0, sector 0 [ 843.048274] EXT4-fs (sr0): unable to read superblock [ 843.063155] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.075904] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.220512] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.220522] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.220530] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.220538] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.220553] end_request: I/O error, dev sr0, sector 0 [ 843.220609] FAT-fs (sr0): unable to read boot sector The lines from Sense Key .. (line 6) to DRIVER_SENSE (line 11) are repeating a lot. I then changed my DVD player with an other spare one I had, and the disc didn't boot neither. I then changed the IDE cable, but still no success. What can I do to make it work? Thanks for your help.

  Read the article

• In which cases build artifacts will be different in different environments

  - by Sundeep

  We are working on automation of deployment using Jenkins. We have different environments - DEV, UAT, PROD. In SVN, we are tagging each release and placing same binaries in DEV, UAT, PROD. The artifacts already contains config files w.r.t each environment but I am not understanding why we are storing binaries in environment folder again. Are there any scenarios where deployment might be different for different environments.

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >