Search Results

Search found 4396 results on 176 pages for 'low poly'.

Page 80/176 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

  • what firefall linux distro applicance could track internet usage per device in my home?

    - by GregH
    Hello, Anyone know of a community edition/open source/free firewall/gateway software product that I could install onto an old PC to act as my firewall/gateway/proxy etc, BUT for which it has the power to track internet usage per device in my home. So: a) Mandatory - Track internet usage for devices on my home network on a per device basis (e.g. various PCs/Xbox etc) b) Mandatory - Report/graph would would give a breakdown of internet usage, per device (e.g. IP address), per day. c) Desirable - as in b) above but per hour d) Desirable - realtime graph (e.g. 5 minute measurement intervals or something) that shows current internet usage per device e) Mandatory - Handles all internal<=internet requests for all protocols (e.g. HTTP, HTTPS, xbox etc) f) Mandatory - No explicit settings in clients required - i.e. Transparent Monitoring concept (for both HTTP and non-HTTP traffic like xbox, skype etc) g) Mandatory - easy "appliance" like installation onto a dedicated low spec PC thanks in advance

    Read the article

  • what firefall linux distro applicance could track internet usage per device in my home?

    - by GregH
    Hello, Anyone know of a community edition/open source/free firewall/gateway software product that I could install onto an old PC to act as my firewall/gateway/proxy etc, BUT for which it has the power to track internet usage per device in my home. So: a) Mandatory - Track internet usage for devices on my home network on a per device basis (e.g. various PCs/Xbox etc) b) Mandatory - Report/graph would would give a breakdown of internet usage, per device (e.g. IP address), per day. c) Desirable - as in b) above but per hour d) Desirable - realtime graph (e.g. 5 minute measurement intervals or something) that shows current internet usage per device e) Mandatory - Handles all internal<=internet requests for all protocols (e.g. HTTP, HTTPS, xbox etc) f) Mandatory - No explicit settings in clients required - i.e. Transparent Monitoring concept (for both HTTP and non-HTTP traffic like xbox, skype etc) g) Mandatory - easy "appliance" like installation onto a dedicated low spec PC thanks in advance

    Read the article

  • Fix bad blocks on Mac hard disk

    - by Andrew Vit
    I have a hard disk that I scanned with TechTool and it reports one bad block. As far as I can tell, TechTool only scans and reports a failure. It doesn't fix anything. Back in the day, Norton Disk Doctor did the job of scanning and flagging (remapping) bad blocks on the Mac. Today we have various tools for fixing up HFS+ directory errors (Disk Utility, fsck, DiskWarrior, TechTool), but I don't know of any tool that will do a surface scan and fix the bad blocks too. What software is available for this? If I know the address of the bad block, is there a low-level terminal utility for marking it?

    Read the article

  • Keyboard, Dual Monitor Question

    - by Dmn
    Im about to get a 23inch Monitor to connect to my laptop for programming, and general multimedia besides. (this is the monitor what do you think? LG 23" LCD And would you recommend getting a keyboard to use (ie not using the laptop one?) seems like it would be kinda awkward otherwise. This is the keyboard im looking at because it seems to have the low laptop style keys. ||| tigerdirect .com/applications/SearchTools/item-details.asp?EdpNo=5214790&sku=L23-0054 ||| or would you recommend something different? Thanks

    Read the article

  • MSSQL instance shuts down

    - by citronas
    I'm currently developing a new ASP.net project hosted on a Windows Server 2008 RC2 with an MSSQL 2008 Express Database. I have three SQL instances (for different purposes) running which currently all contain a single database. For apprently no reason, these instances tend to shut down after some days, for no apparent reason. There might be low or none traffic to these instances, because there might be some days in a row, where I can't develop. It now occured several times, that one or two of these three instances just shut down, so that I can't access the database, without manually starting the instance. I can't seem to find a event log entry for the shutdown, which is most likely because I just enabled logging (why is the default setting off?) So the questions are: * Why does a SQL instance shut down? (Is there such thing as a "Shut down instance after 3 days of inactivity"? * How can I achieve that the instances are running 24/7?

    Read the article

  • Postfix SMTP server down on Ubuntu

    - by Paddington
    I have a Plesk server running Postfix on Ubuntu 10.04 and the SMTP service on port 25 is down. When I stop and then start postfix the server comes up only for a minute and goes down again. I have checked the load on the server and it is low as shown: *top - 04:29:33 up 19 days, 3:25, 4 users, load average: 1.47, 1.78, 2.34 Tasks: 936 total, 1 running, 935 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.3%sy, 0.0%ni, 86.6%id, 11.7%wa, 0.6%hi, 0.1%si, 0.0%st Mem: 6110496k total, 6072988k used, 37508k free, 251244k buffers Swap: 12000544k total, 95264k used, 11905280k free, 4370432k cached* IMAP clients are not experiencing a problem and there are no issues with receiving emails for both POP or IMAP. Only SMTP (port 25) is a problem. If I ask clients to use the submission port (587) messages are delivered. netstat -lnt shows the following results , so its not a port issue. tcp 0 0 0.0.0.0:25 0.0.0.0: LISTEN tcp 0 0 0.0.0.0:8443 0.0.0.0:* LISTEN*

    Read the article

  • page allocation failure - am I running out of memory?

    - by mfriedman
    Lately I've noticing entries like this one in the kern.log of one of my servers: Feb 16 00:24:05 aramis kernel: swapper: page allocation failure. order:0, mode:0x20 This is what I'd like to know: What exactly does that message mean? Is my server running out of memory? The swap usage is quite low (less than 10%), and so far I haven't noticed any processes being killed because of lack of memory. Additional information: The server is a Xen instance (DomU) running Debian 6.0 It has 512 MB of RAM and a 512 MB swap partition CPU load inside the virtual machine shows an average of 0.25

    Read the article

  • Need help trouble shooting Https webserver error - SSL Handshake failed

    - by DerNalia
    I followed this guide: http://hints.macworld.com/article.php?story=20041129143420344 Here is my virtual host definition <VirtualHost *:443> SSLEngine on SSLProxyEngine On RequestHeader set Front-End-Https "On" CacheDisable * SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL DocumentRoot "/Users/me/projects/myproject/public" ServerName ssl.mydomain.com ServerAlias *.ssl.mydomain.com SSLCertificateKeyFile "/private/etc/apache2/certs/webserver.nopass.key" SSLCertificateFile "/private/etc/apache2/certs/newcert.pem" SSLCACertificateFile "/private/etc/apache2/certs/demoCA/cacert.pem" SSLCARevocationPath "/private/etc/apache2/certs/demoCA/crl" ErrorLog "/Users/me/Desktop/ssl.log" ProxyPass / https://localhost:3002/ ProxyPassReverse / https://localhost:3002 ProxyPreserveHost on </VirtualHost> And when I try connecting to the sevre viov the web browser, I get this error: [Thu Feb 02 16:50:40 2012] [error] (502)Unknown error: 502: proxy: pass request body failed to 127.0.0.1:3002 (localhost) [Thu Feb 02 16:50:40 2012] [error] [client 96.11.81.39] proxy: Error during SSL Handshake with remote server returned by /session/new [Thu Feb 02 16:50:40 2012] [error] proxy: pass request body failed to 127.0.0.1:3002 (localhost) from 96.11.81.39 () how do I debug / fix this?

    Read the article

  • How to change the fonts used in Foxit Reader?

    - by user982438
    I really want to use Foxit Reader as my default PDF reader for its Tab Interface, and low memory footprint. Having tried mutiple times over the years the only thing that is stopping me are the Fonts. PDF in Adobe Reader looks Regular, but PDF Rendered in Foxit Looks Ugly. Would this solution works in Chrome as well? Since i record Chrome is using Foxit Reader as its embedded PDF engine. And is there any reasons why Fonts are used differently in Adobe and Foxit Reader?

    Read the article

  • Help with dynamic range compression function (audio)

    - by MusiGenesis
    I am writing a C# function for doing dynamic range compression (an audio effect that basically squashes transient peaks and amplifies everything else to produce an overall louder sound). I have written a function that does this (I think): public static void Compress(ref short[] input, double thresholdDb, double ratio) { double maxDb = thresholdDb - (thresholdDb / ratio); double maxGain = Math.Pow(10, -maxDb / 20.0); for (int i = 0; i < input.Length; i += 2) { // convert sample values to ABS gain and store original signs int signL = input[i] < 0 ? -1 : 1; double valL = (double)input[i] / 32768.0; if (valL < 0.0) { valL = -valL; } int signR = input[i + 1] < 0 ? -1 : 1; double valR = (double)input[i + 1] / 32768.0; if (valR < 0.0) { valR = -valR; } // calculate mono value and compress double val = (valL + valR) * 0.5; double posDb = -Math.Log10(val) * 20.0; if (posDb < thresholdDb) { posDb = thresholdDb - ((thresholdDb - posDb) / ratio); } // measure L and R sample values relative to mono value double multL = valL / val; double multR = valR / val; // convert compressed db value to gain and amplify val = Math.Pow(10, -posDb / 20.0); val = val / maxGain; // re-calculate L and R gain values relative to compressed/amplified // mono value valL = val * multL; valR = val * multR; double lim = 1.5; // determined by experimentation, with the goal // being that the lines below should never (or rarely) be hit if (valL > lim) { valL = lim; } if (valR > lim) { valR = lim; } double maxval = 32000.0 / lim; // convert gain values back to sample values input[i] = (short)(valL * maxval); input[i] *= (short)signL; input[i + 1] = (short)(valR * maxval); input[i + 1] *= (short)signR; } } and I am calling it with threshold values between 10.0 db and 30.0 db and ratios between 1.5 and 4.0. This function definitely produces a louder overall sound, but with an unacceptable level of distortion, even at low threshold values and low ratios. Can anybody see anything wrong with this function? Am I handling the stereo aspect correctly (the function assumes stereo input)? As I (dimly) understand things, I don't want to compress the two channels separately, so my code is attempting to compress a "virtual" mono sample value and then apply the same degree of compression to the L and R sample value separately. Not sure I'm doing it right, however. I think part of the problem may the "hard knee" of my function, which kicks in the compression abruptly when the threshold is crossed. I think I may need to use a "soft knee" like this: Can anybody suggest a modification to my function to produce the soft knee curve?

    Read the article

  • display internet usage agreement before users can use internet

    - by Force Flow
    I was looking for a way to display a usage agreement page in browsers that users must agree to before they are allowed to access the internet. This would be for users on public computers and public/open wifi. I'm using a sonicwall firewall which does support this feature, however, there is a rediculously low character limit which makes it impractical to use. I thought about setting the browser's homepage to a usage agreement page, but that can easily be bypassed by navigating to somewhere else. Are there any other approaches that may be worth considering? There is currently no server in place on the public network, though I can set one up if need be.

    Read the article

  • RDMA architecture - do you need adapters on both ends?

    - by Bobb
    I know Linux can use RDMA NICs like Solarflare... I just found Intel has something like that NetEffect cards. But Intel is talking all about clusters.. Can someone please explain. If I want low-latency networking and install RDMA NIC on my server. Is there limitation on where the cable can go? Is there a specific device expected on the other end? Is it special RDMA switch or RDMA adapter before switch or what? Why is this cluster talk? What if I want a single server with Windows (I can install HPC Windows or Windows 2008 R2)?

    Read the article

  • RDP and New Accounts

    - by leeand00
    I created a new user account on the domain and added them to the Remote Desktop Users group. I could login just fine locally, but when I logged in remotely I was basically told that I could not login from there using that user. I could login just fine as the administrator or anybody else other than that new account. So I researched it a bit more and found that my setting looked like this on the local machine: So I changed it to Allow connections only from computers running Remote Desktop with Network Level Authentication (NLA). Now when I tried this down at my office I connected with RDP just fine on another computer. But low and behold when I got home and simply try to connect to the machine, I get the message: There has to be some kind of in between setting, or additional setting that I need to change on the user that allows me to connect directly via remote desktop over the VPN. At the moment I can connect by connecting to another computer on the network and then RDPing from there into my machine, but this is not ideal.

    Read the article

  • Errors reported by "powercfg -energy"

    - by Tim
    Running "powercfg -energy" under Windows 7 command line, I received a report with following three errors: System Availability Requests:Away Mode Request The program has made a request to enable Away Mode. Requesting Process \Device\HarddiskVolume2\Program Files\Windows Media Player\wmpnetwk.exe CPU Utilization:Processor utilization is high The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization. Average Utilization (%) 49.25 Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer. I was wondering for the first error, what does "enable away mode" mean? for the second, what utilization percentage of CPU is reasonable? for the third, what is "PCI Express Active-State Power Management (ASPM)"? How I can correct the three errors? Thanks and regards!

    Read the article

  • Program to print gCal or iCal calendars in a monthly one calendar per column format

    - by David Smith
    I'm moving my family off of using the low tech "Boynton Mom's Family Calendar" to schedule things but I'd like to be able to create a monthly printout of the calendar in the same "Boynton" format (I'm sure it has an official name). The format is kind-of like a spreadsheet where each row of the calendar is a different day of the month and there is a separate column for each person in the family. I have all our calendars on Google but they are also accessible from iCal on the Mac. Is there a Mac program that can get the data from gCal or iCal print out the calendars in the Boynton format?

    Read the article

  • Live CD with good anti-virus software to scan/repair Windows?

    - by overtherainbow
    Hello, I browsed through the archives, and it seems like there's no live CD from which to run a good, up-to-date anti-virus application, at least to check whether a Windows host has been compromised The Ultimate Boot CD has only three AV applications, and their virus definition is from... 2007 In a report, ClamAV scored very low. It's nice that it's open-source, but if it's not as good as commercial alternatives... Those of you into this kind of thing, do you confirm that there's just no good live CD to inspect Windows hosts, and possibly repair them? If there is, what do you recommend? Thank you.

    Read the article

  • Can I use a Mac Mini as a web server and database server? What are the pros and cons?

    - by Christopher Altman
    We are a bootstrapped web start up. We have a LAMP web application that we expect relatively low to mid traffic because users need an account to log in. Our current approach is to colocate two servers, a web and mysql database server. We are planning to use Ubuntu Server 9.04. We have shopped around for dedicated servers but the price range from $900 to $1500 per month, therefore we are exploring the colocation approach. We are considering purchasing two Mac Minis (2.0GHz Intel Core 2 Duo 2 Gb RAM) because we are familiar with the machines are the prices are relatively inexpensive. What are the pros and cons of using these 'non-server' grade machines? We would install Ubuntu Sever and attach firewire external hard drives. Any advice on how to set up 'good-and-economic' web/database servers is welcomed.

    Read the article

  • Lost disk space in Windows 7, cannot find the missing

    - by Tsanders
    My hard drive is complaining it is low on disk space, but a strange thing seems to be happening: Explorer reports 10Gb of available space (on a 120 Gb hard disk), chkdsk in the command prompt does the same but if I use a disk space tool such as SpaceSniffer or WinDirStat, only 50Gb of data is found. My guess is that there somehow is a hold on a large block of disk space (but that's just a guess) because of a prior very large (40 Gb) download attempt that didn't complete. There isn't 40Gb of files on the drive (hidden or visible), yet Explorer insists that something is there. How can I claim back this hard disk drive (without formatting my hard disk)? SpaceMonger is providing a clue, reporting four unscannable folders which add up to 43Gb: C:\RRBackups C:\System Volume Information C:\Windows\Csc\v2.06 C:\Windows\System32\LogFiles\Wmi\RtBackup Does anybody know what these folders are for, and how I can claim back at least some space? Restore point claims about 4Gb, so that doesn't seem to be the main problem.

    Read the article

  • HP Compaq T20 Thin Clients & Windows Server 2008 R2: RDP Disconnects instantly.

    - by sinni800
    Hello, I have some HP Compaq T20 Thin Clients connecting to a Windows Server 2003. Now I want to upgrade to 2008 R2, so I tested a trial installation with remote desktop in administration mode. So I try to connect my T20 to the server and... It doesn't matter if I turn off encryption or not it disconnects with an generic error instantly. The T20s have Windows CE embedded with RDP 5.2 installed. Out of curiosity I tried Windows Server 2008 (no R2) and it worked! I tried the same with a Windows 7 machine set up with- no work. I can not update the T20s to Windows NT embedded for example because they only have a low amount of flash memory. It seems the "new" version of RDP coming from Windows 7 / Windows Server 2008 R2 is completely incompatible with the older 5.2 version. People are having the same problem here: http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/700488cd-a872-47e5-85a7-595f050afc10

    Read the article

  • Wife's Email going into Junk Mail folder in Outlook despite turning off Junk Mail

    - by Adam V
    I recently started a new job. Today I tried emailing my wife from my new company email account. When she responded, her email went into the "Junk E-mail" folder. So I tried a few things: Added her to the "Safe Senders" list Added her as an Outlook contact and checked the "Also trust email from my Contacts" box in the "Safe Senders" tab Added her domain to the "Safe Senders" list Switched from "Low" to "No Automatic Filtering" in the Junk Email options No matter what I would do, her emails would still go into the Junk Email folder. Can anyone recommend additional things to try? EDIT: This is using Exchange.

    Read the article

  • Proxification rulte for System process

    - by kseen
    I'm trying to configure Microsoft Visual Studio 2010 remote debugging and ran into issue: while connecting to remote computer running MSVSMON, client computer sends SYN request for connection. It makes it under the System process (as I see it in TCPView). As every network apps should be configured to use proxy in our network, I'm trying to add devenv.exe to proxification rules to make its traffic goes thru LAN's proxy server. It doesn't help. So my question is how can I make that low-level-system traffic will go through local area network proxy server?

    Read the article

  • Samsung 830 very slow benchmark numbers

    - by alekop
    I just bought a new SSD, and installed a fresh copy of Windows on it. I didn't see any noticeable difference in boot times, app start-up times, so I decided to benchmark it. Asus P7P55D-E Intel i5-760 Samsung 830 256GB SATA III Windows 7 Ultimate 64-bit The Windows experience index gave the drive a 7.3 rating, but real-world performance is not particularly impressive. Any ideas why the numbers are so low? UPDATE: It turns out that SATA III support is turned off by default on the P7P55D motherboard. After enabling it in BIOS (Tools - Level Up), the scores went up: Read Write Seq 325 183 4K 16 49 IOPS 32K 28K It's an improvement, but still far below what they should be for this drive.

    Read the article

  • Using QoS to prioritize IP addresses

    - by Tristan
    I have a Western Digital N900 router. I was hoping I'd be able to throttle users based on their MAC address with it, which isn't possible sadly. Seems simple in principle though, duh. The battle against bandwidth hogging roomates rages on. Could I just set the local IP range to their IP, and then set the Local port range to every single port in existence. Then prioritize their IP to lower than mine? Will this work? What are all the ports? And what's the difference between Local and Remote IPs or Ports? Name: Roomate, Priority: Low, Protocol: TCP or UDP ??, Local IP Range: .101 to .101, Local Port Range: 0 to infinity, Remote IP Range: ? to ?, Remote Port Range: ? to ?

    Read the article

  • HTTP error code 405: tomcat Url mapping issue

    - by Andrew
    I am having trouble POSTing to my java HTTPServlet. I am getting "HTTP Status 405 - HTTP method GET is not supported by this URL" from my tomcat server". When I debug the servlet the login method is never called. I think it's a url mapping issue within tomcat... web.xml <servlet-mapping> <servlet-name>faxcom</servlet-name> <url-pattern>/faxcom/*</url-pattern> </servlet-mapping> FaxcomService.java @Path("/rest") public class FaxcomService extends HttpServlet{ private FAXCOM_x0020_ServiceLocator service; private FAXCOM_x0020_ServiceSoap port; @GET @Produces("application/json") public String testGet() { return "{ \"got here\":true }"; } @POST @Path("/login") @Consumes("application/json") // @Produces("application/json") public Response login(LoginBean login) { ArrayList<ResultMessageBean> rm = new ArrayList<ResultMessageBean>(10); try { service = new FAXCOM_x0020_ServiceLocator(); service.setFAXCOM_x0020_ServiceSoapEndpointAddress("http://cd-faxserver/faxcom_ws/faxcomservice.asmx"); service.setMaintainSession(true); // enable sessions support port = service.getFAXCOM_x0020_ServiceSoap(); rm.add(new ResultMessageBean(port.logOn( "\\\\CD-Faxserver\\FaxcomQ_API", /* path to the queue */ login.getUserName(), /* username */ login.getPassword(), /* password */ login.getUserType() /* 2 = user conf user */ ))); } catch (RemoteException e) { e.printStackTrace(); } catch (ServiceException e) { e.printStackTrace(); } // return rm; return Response.status(201).entity(rm).build(); } @POST @Path("/newFaxMessage") @Consumes(MediaType.APPLICATION_JSON) @Produces(MediaType.APPLICATION_JSON) public ArrayList<ResultMessageBean> newFaxMessage(FaxBean fax) { ArrayList<ResultMessageBean> rm = new ArrayList<ResultMessageBean>(); try { rm.add(new ResultMessageBean(port.newFaxMessage( fax.getPriority(), /* priority: 0 - low, 1 - normal, 2 - high, 3 - urgent */ fax.getSendTime(), /* send time */ /* "0.0" - immediate */ /* "1.0" - offpeak */ /* "9/14/2007 5:12:11 PM" - to set specific time */ fax.getResolution(), /* resolution: 0 - low res, 1 - high res */ fax.getSubject(), /* subject */ fax.getCoverpage(), /* cover page: "" – default, “(none)� – no cover page */ fax.getMemo(), /* memo */ fax.getSenderName(), /* sender's name */ fax.getSenderFaxNumber(), /* sender's fax */ fax.getRecipients().get(0).getName(), /* recipient's name */ fax.getRecipients().get(0).getCompany(), /* recipient's company */ fax.getRecipients().get(0).getFaxNumber(), /* destination fax number */ fax.getRecipients().get(0).getVoiceNumber(), /* recipient's phone number */ fax.getRecipients().get(0).getAccountNumber() /* recipient's account number */ ))); if (fax.getRecipients().size() > 1) { for (int i = 1; i < fax.getRecipients().size(); i++) rm.addAll(addRecipient(fax.getRecipients().get(i))); } } catch (RemoteException e) { // TODO Auto-generated catch block e.printStackTrace(); } return rm; } } Main.java private static void main(String[] args) { try { URL url = new URL("https://andrew-vm/faxcom/rest/login"); HttpURLConnection conn = (HttpURLConnection) url.openConnection(); conn.setRequestMethod("POST"); conn.setDoOutput(true); conn.setRequestProperty("Content-Type", "application/json"); FileInputStream jsonDemo = new FileInputStream("login.txt"); OutputStream os = (OutputStream) conn.getOutputStream(); os.write(IOUtils.toByteArray(jsonDemo)); os.flush(); if (conn.getResponseCode() != 200) { throw new RuntimeException("Failed : HTTP error code : " + conn.getResponseCode()); } BufferedReader br = new BufferedReader(new InputStreamReader( (conn.getInputStream()))); String output; System.out.println("Output from Server .... \n"); while ((output = br.readLine()) != null) { System.out.println(output); } // Don't want to disconnect - servletInstance will be destroyed // conn.disconnect(); } catch (MalformedURLException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } } I am working from this tutorial: http://www.mkyong.com/webservices/jax-rs/restfull-java-client-with-java-net-url/

    Read the article

  • Where does apache store initialization state for mod_proxy_balancer

    - by khoxsey
    I run apache2 on Ubuntu as a caching load-balancing reverse proxy in front of a group of application servers. I have noticed that the balancer maintains some state for some of the attributes visible in /balancer-manager such as whether an IP is enabled/disabled, load factor, etc. My site has periods of high (and low) usage, and recently as I added a new server to the working group I noticed that the load balancer picked up the new server but had it set to Disabled. I'm curious where that data is stored, and/or how it is initialized.

    Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >