Search Results

Search found 4258 results on 171 pages for 'mark kirby'.

Page 80/171 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

  • http connection timeout issues

    - by Mark
    I'm running into an issue when i try to use the HttpClient connecting to a url. The http connection is taking a longer time to timeout, even after i set a connection timeoout. int timeoutConnection = 5000; HttpConnectionParams.setConnectionTimeout(httpParameters, timeoutConnection); int timeoutSocket = 5000; HttpConnectionParams.setSoTimeout(httpParameters, timeoutSocket); It works perfect most of the time. However, every once in while, the http connection runs for ever and ignore the setconnectiontimeout, especailly when the phone is connected to wifi, and the phone was idling. So after the phone is idling, the first time i try to connect, the http connection ignores the setconnectiontimeout and runs forever, after i cancel it and try again, it works like charm everytime. But that one time that doesn't work it creates a threadtimeout error, i tried using a different thread, it works, but i know that the thread is running for long time. I understand that the wifi goes to sleep on idle, but i dont understand why its ignoring the setconnectiontimeout. Anyone can help, id really appreciated.

    Read the article

  • Centering Divisions Around Zero

    - by Mark
    I'm trying to create something that sort of resembles a histogram. I'm trying to create buckets from an array. Suppose I have a random array doubles between -10 and 10; this is very simplified. I then want to specify a center point, in this case 0 and the number of buckets. If I want 4 buckets the division would be -10 to -5, -5 to 0, 0 to 5 and 5 to 10. Not that complicated right. Now if I change the min and max to -12 and -9 and as for 4 divisions its more complicated. I either want a division at -3 and 3; it is centered around 0 ; or one at -6 to 0 and 0 to 6. Its not that hard to find the division size = Math.Ceiling((Abs(Max) + Abs(Min)) / Divisions) Then you would basically have an if statement to determine whether you want it centered on 0 or on an edge. You then iterate out from either 0 or DivisionSize/2 depending on the situation. You may not ALWAYS end up with the specified number of divisions but it will be close. Then you iterate through the array and increment the bin count. Does this seem like a good way to go about this? This method would surely work but it does not seem to be the most elegant. I'm curious as to whether the creation of the bins and the counting from the list could be done in a clever class with linq in a more elegant way? Something like creating the bins and then having each bin be a property {get;} that returns list.Count(x=> x >= Lower && x < Upper).

    Read the article

  • SVN: Recurisvely add files?

    - by Mark
    I'm trying svn add *.py --force As the documentation suggests, but I know for a fact it's missing files nested in deeper folders. Why? Is there a standard way to do this with other unix commands too? */*.py will nab a few more files, but it's kind of a pain in the butt to do this for every possible depth.

    Read the article

  • Unable to connect to any of the specified MySQL hosts.

    - by Mark
    Can anyone help me on how this error arises? My previous version of MySql.dll is 1.0.7.30072 then I have upgrade my MySql.dll version into 1.0.10.1 to prevent opening new MySql transaction when the previous transaction is not yet committed.. Is it the error arises because of the new dll?

    Read the article

  • What is the best way to implement a callback scenario using WCF and ASP.NET MVC?

    - by Mark Struzinski
    I am new to WCF. I just finished reading Learning WCF and I think I've got a pretty good grasp of the fundamentals. I am adding functionality to a line of business app that runs on ASP.NET MVC entirely inside the corporate LAN. I am calling into a service that will also send me events as they occur (and not as responses to service calls). These events can occur at any point during the user's session. I have the service written, and it is able to pick up these events. What would be the best way to deliver these events to the user? My initial thought is to run the WCF service in duplex mode over net TCP and implement the events as callbacks. Using this scenario, the best way I can think up to deliver the events to the user is a dictionary object stored in the session. The dictionary would be populated by the callbacks and polled on a set frequency for delivery via AJAX calls. Has anyone dealt with this scenario? Is there a more efficient way to implement this?

    Read the article

  • Is there a Javadoc-like plugin for Xcode that automatically generates the doc template?

    - by Mark
    I'm aware of Doxygen to generate the documentation. What I'm looking for is quick way to insert documentation in Xcode similar to what Eclipse does when editing Java files. Let's say I have an objective-c method with a couple of arguments like this: -(NSInteger*) sumOf: (NSInteger*) one and:(NSInteger*) two {... In Eclipse, if you place the cursor above the method and type: /**<Enter> you get a Javadoc template pre-populated with @param and @return tags. Is it possible to achieve something similar in Xcode? After typing /**<Enter>, I'd like to get this automatically: /** * * @param one * @param two * * @return */ -(NSInteger*) sumOf: (NSInteger*) one and:(NSInteger*) two {...

    Read the article

  • autosave pattern

    - by Mark
    I'm using localstorage to do gmail-style autosave on a webpage. So I basically save every 30 seconds to local, OK. The problem is recovery. I can't detect whether or not a user has crashed or incorrectly exited. So let's say the user crashed and loads up the form again, I can't just continue saving and overwriting the previous autosaves. I need to restore the previous save. But let's say the user didn't crash. He did everything correctly, but then used a different browser to edit the same file, so no new data to the previous browser's localstorage. He then loads up the file in the previous browser. The localstorage should not be restored in that case. Assuming there's no way to compare timestamps, how can I solve this problem? Thanks.

    Read the article

  • Open URL with Safari no matter what system browser is set to

    - by Mark
    In my objective-c program, I need to open a URL in Safari no matter what the system's default browser is. That means that this won't work, because it could launch Firefox or whatever other browser: NSWorkspace * ws = [NSWorkspace sharedWorkspace]; [ws openURL: url]; I think I'm close with this: [ws launchAppWithBundleIdentifier: @"com.apple.Safari" options: NSWorkspaceLaunchWithoutActivation additionalEventParamDescriptor: NULL launchIdentifier: nil]; only need to figure out how to pass in the URL as parameter... Is there an easier way? Thanks!

    Read the article

  • Adding Timestamp to Java's GC messages in Tomcat 6

    - by ripper234
    I turned on Java's GC log options -XX:+PrintGC -XX:+PrintGCTimeStamps -XX:+PrintGCDetails Which print out these messages to standard output (catalina.out): 314.884: [CMS-concurrent-mark-start] 315.014: [CMS-concurrent-mark: 0.129/0.129 secs] [Times: user=0.14 sys=0.00, real=0.13 secs] 315.014: [CMS-concurrent-preclean-start] 315.016: [CMS-concurrent-preclean: 0.003/0.003 secs] [Times: user=0.00 sys=0.00, real=0.00 secs] 315.016: [CMS-concurrent-abortable-preclean-start] 332.055: [GC 332.055: [ParNew: 17128K->84K(19136K), 0.0017700 secs] 88000K->70956K(522176K) icms_dc=4 , 0.0018660 secs] [Times: user=0.00 sys=0.00, real=0.00 secs] CMS: abort preclean due to time 352.253: [CMS-concurrent-abortable-preclean: 0.023/37.237 secs] [Times: user=0.78 sys=0.02, real=37.23 secs] How can I make these log lines appear with an actual timestamp (including date) instead of these numbers, which presumably mean "time since JVM started" ?

    Read the article

  • How do you specify a 64 bit unsigned int const 0x8000000000000000 in VS2008?

    - by Mark Franjione
    I read about the Microsoft specific suffix "i64" for integer constants. I want to do an UNsigned shift to a ULONGLONG. ULONGLONG bigNum64 = 0x800000000000000i64 >> myval; In normal C, I would use the suffix "U", e.g. the similar 32 bit operation would be ULONG bigNum32 = 0x80000000U >> myval; I do NOT want the 2's complement sign extension to propogate through the high bits. I want an UNSIGNED shift on a 64 bit const number. I think my first statement is going to do a SIGNED shift right. I tried 0x800000000000000i64U and 0x800000000000000u64 but got compiler errors.

    Read the article

  • What is wrong with this php loop?

    - by Mark R
    I made a loop but it doesn't work. here's what I did: <?php if(is_tree('4')) { ?> <?php $show_after_p = 2; $content = apply_filters('the_content', $post->post_content); if(substr_count($content, '<p>') > $show_after_p) { $contents = explode("</p>", $content); $p_count = 1; foreach($contents as $content) { echo $content; if($p_count == $show_after_p) { ?> YOUR AD CODE GOES HERE < ? } echo "</p>"; $p_count++; } } ?> <?php else : ?> <?php the_content('<p class="serif">Read the rest of this page &raquo;</p>'); ?> <?php endif; } ?> I need to make it work but don't know how. I'm guessing it's a simple syntax error I'm not seeing?

    Read the article

  • insert multiple rows into database from arrays

    - by Mark
    Hi, i need some help with inserting multiple rows from different arrays into my database. I am making the database for a seating plan, for each seating block there is 5 rows (A-E) with each row having 15 seats. my DB rows are seat_id, seat_block, seat_row, seat_number, therefore i need to add 15 seat_numbers for each seat_row and 5 seat_rows for each seat_block. I mocked it up with some foreach loops but need some help turning it into an (hopefully single) SQL statement. $blocks = array("A","B","C","D"); $seat_rows = array("A","B","C","D","E"); $seat_nums = array("1","2","3","4","5","6","7","8","9","10","11","12","13","14","15"); foreach($blocks as $block){ echo "<br><br>"; echo "Block: " . $block . " - "; foreach($seat_rows as $rows){ echo "Row: " . $rows . ", "; foreach($seat_nums as $seats){ echo "seat:" . $seats . " "; } } } Maybe there's a better way of doing it instead of using arrays? i just want to avoid writing an SQL statement that is over 100 lines long ;) (im using codeigniter too if anyone knows of a CI specific way of doing it but im not too bothered about that)

    Read the article

  • How to generate distinct random numbers per distinct threads in .NET?

    - by mark
    Dear ladies and sirs. I have to generate 19 bit random numbers. However, there is a constraint - two threads may not generate the same random number when running certain code. The simplest solution is lock the entire code. However, I would like to know if there is a non locking solution. I thought, I can incorporate ManagedThreadId within the produced random numbers, but the ManagedThreadId documentation on the Internet mentions that it may span the whole Int32 range. Unmanaged thread id seems to be limited to 11 bits, still this leaves me with just 8 truly random bits. Are there any other ways? Somehow to utilize the Thread Local Storage, may be? Thanks.

    Read the article

  • Oracle: how to UPSERT (update or insert into a table?)

    - by Mark Harrison
    The UPSERT operation either updates or inserts a row in a table, depending if the table already has a row that matches the data: if table t has a row exists that has key X: update t set mystuff... where mykey=X else insert into t mystuff... Since Oracle doesn't have a specific UPSERT statement, what's the best way to do this?

    Read the article

  • I've built a Windows service as "Any CPU". Why does it run in 32-bit mode on my 64 bit machine?

    - by Mark
    I've built a Windows service as "Any CPU". However, when I run it on my 64 bit machine it runs in 32 bit. How can I fix it? I'm using .NET and C#, and my operating system is Windows 2008 R2. If I build it in x64 it correctly loads in 64 bit mode. However, "Any Cpu" -- which is what I want -- loads in 32 bit, even though the machine it's running on perfectly supports 64 bit. Thanks for any help.

    Read the article

  • Smallest Java Runtime I can legally distribute?

    - by Mark
    My Java SWT desktop application is distributed with it's own Java runtime and I want to make the download size as small as possible. I'd like to remove all the classes I don't use from rt.jar, but this is forbidden according to JDK runtime licence (see the README.html file in the root JDK folder). Since Java is open source, am I allowed to compile my own 'Java' runtime from source which doesn't have this distribution restriction? If so, has anyone done this already? (Or do you just ignore the JDK licence terms?)

    Read the article

  • Detect a tag in hook-script SVN

    - by Mark
    Is there a way that I can detect a tag/branch in SVN? Could I find out where the commits destination is? I want to check that all externals are set to a specific version of the folder they are pointing to, I don't want to prevent commits to a tag with this script. I am writing the script with the c-pyhton bindings.

    Read the article

  • Is it possible to easily modify the log4net section in the config file of several running applicatio

    - by mark
    Dear ladies and sirs. Our product consists of client, server and agents. Each deployed on different machines. The QA is having a hard time to manipulate the log4net sections in the respective config files. Right now, they have to have remote desktops to all the relevant machines and open notepad in each of them and then edit the files one at a time switching between different machines as they proceed. A real pain in the ass. Can anyone suggest a better solution to this problem? Thanks.

    Read the article

  • Create table class as a singleton

    - by Mark
    I got a class that I use as a table. This class got an array of 16 row classes. These row classes all have 6 double variables. The values of these rows are set once and never change. Would it be a good practice to make this table a singleton? The advantage is that it cost less memory, but the table will be called from multiple threads so I have to synchronize my code which way cause a bit slower application. However lookups in this table are probably a very small portion of the total code that is executed. EDIT: This is my code, are there better ways to do this or is this a good practice? Removed synchronized keyword according to recommendations in this question. final class HalfTimeTable { private HalfTimeRow[] table = new HalfTimeRow[16]; private static final HalfTimeTable instance = new HalfTimeTable(); private HalfTimeTable() { if (instance != null) { throw new IllegalStateException("Already instantiated"); } table[0] = new HalfTimeRow(4.0, 1.2599, 0.5050, 1.5, 1.7435, 0.1911); table[1] = new HalfTimeRow(8.0, 1.0000, 0.6514, 3.0, 1.3838, 0.4295); //etc } @Override @Deprecated public Object clone() throws CloneNotSupportedException { throw new CloneNotSupportedException(); } public static HalfTimeTable getInstance() { return instance; } public HalfTimeRow getRow(int rownumber) { return table[rownumber]; } }

    Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >