Search Results

Search found 3105 results on 125 pages for 'stupid mistake'.

Page 80/125 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

  • Same netmask or /32 for secondary IP on Linux

    - by derobert
    There appear to be (at least) two ways to add a secondary IP address to an interface on Linux. By secondary, I mean that it'll accept traffic to the IP address, and responses to connections made to that IP will use it as a source, but any traffic the box originates (e.g., an outgoing TCP connection) will not use the secondary address. Both ways start with adding the primary address, e.g., ip addr add 172.16.8.10/24 dev lan. Then I can add the secondary address with either a netmask of /24 (matching the primary) or /32. If I add it with a /24, it gets flagged secondary, so will not be used as the source of outgoing packets, but that leaves a risk of the two addresses being added in the wrong order by mistake. If I add it with /32, wrong order can't happen, but it doesn't get flagged as secondary, and I'm not sure what the bad effects of that may be. So, I'm wondering, which approach is least likely to break? (If it matters, the main service on this machine is MySQL, but it also runs NFSv3. I'm adding a second machine as a warm standby, and hope to switch between them by changing which owns the secondary IP.)

    Read the article

  • Windows Domain Chaos - Any Solving Approach

    - by Chake
    we are running an old Window 2003 Server as Domain Controller (DC2003). To safely migrate to Windows 2008 R2 we added a 2008 R2 (DC2008R2) to the domain as domain controller (adprep etc.). After dcpromo on DC2008R2 everything seemed to be ok. The new DC appeared under the "Domain Controlelrs" node. It wasn't checked at this time, if DC2008R2 can REALLY act as domain controller. Later we tried to shutdown DC2003 and ran into a total mess with non functional Exchange and Team Foundation Services. After that I got the job to fix... First i thought it could be an Problem with DC2008R2. So I removed it as Domain Controller and installed a new Windows 2008 R8 Server DC2008R2-2. I ran into similar Problems. I tried a bunch of stuff, but nothign helped. I won't list it, maybe I made an mistake, so I'm willing to redo it with your suggestions. To have a starting point I tried the best practise analyser whicht ended up with 24 "Compatible" and 26 "Not Compatible" tests. From these 26 tests 19 read the same. (I'm translating from german, so that may to be the exact wording) Problem: Using the Best Practise Analyser for Active Directory Domain Services (Active Directory Domain Services Best Practices Analyzer, AD DS BPA) no data can be be gathered using the name of the forest and the domain controller DC2008R2-2. I appreciate any suggestions, this really bothers me.

    Read the article

  • Gnome-panel disappearance in Ubuntu 10.10

    - by jurchiks
    Just today, after about a week of somewhat normal running (I'm a total beginner in Linux and the level of amazingly stupid problems I encountered made me go nuts), today my panel disappeared (the one with Applications/System menus, you'd call it taskbar in Windows). Also, Alt+F2 doesn't work and Ctrl+Alt+Backspace has no effect (I'd think it's supposed to do something). I tried the solution posted here: Panel doesn't show at startup at Ubuntu 10.04 No luck, didn't change absolutely anything. I also couldn't find the .gconf and .gconfd folders using search, so couldn't try that option. There were ones that had same names but without the dot though, but there were several so I didn't risk. What could possibly be the reason for this? All I did yesterday was try to install some updates (another extremely dumb problem - doesn't allow to install even the official updates - "insecure sources" or smth like that, tried fixing it with some tutorials on the net but in the end it worked only for half a day and went back to refusal mode :@) and very few tools from the Ubuntu Software Center, but nothing that would change system settings just by installing it.

    Read the article

  • Google app mail hosting and windows 2008 server DNS configuration

    - by fyasar
    Hi There, I used to use shared hosting before and I created a google app account and I configured DNS records on shared hosting's contol panel according to google dns documentations. Everything was working until I switched to dedicated server. First I added DNS role to my new server and I configured whole DNS and NS stuff. I have mail address that mail.domain.com that was redirecting to google app email before. Rightnow, It's not possible to access to mail.domain.com addres from somewhere. But I'm accessing from a few point which located some computer on different network. I stacked in this problem. Please, see the below screen shots I checked on DNSStuff.com,everything is green. Also, I checked on InteliWiz, it seems correct And, Here is the my DNS records. I was accessing to my mail.domain.com address from everywhere, Now, I cannot access to mails from many places since 3 week. Where is the my mistake ? Any help would be appriciated.

    Read the article

  • All commands stopped working in centos 6.5

    - by Michael
    I have made a big mistake while removing some duplicate packages as it appears to be broken. yum 1036 rpm -e --nodeps glibc-2.12-1.132.el6_5.2.x86_64 1037 rpm -e --nodeps nscd-2.12-1.132.el6_5.2.x86_64 1038 rpm -e --nodeps glibc-common-2.12-1.132.el6_5.2.x86_64 1040 rpm -e --nodeps glibc-common-2.12-1.132.el6.x86_64 glibc-devel-2.12-1.132.el6.x86_64 glibc-headers-2.12-1.132.el6.x86_64 1041 rpm -e glibc.x86_64 1042 rpm -e --nodeps glibc.x86_64 The issue happened after doing 1042 step. None of commands work(including yum, rpm, ls, cp etc) and getting error /lib64/ld-linux-x86-64.so.2: bad ELF interpreter: No such file or directory I thought that installing glibc after removing all the current ones would help to resolve the duplicate package error :( Now I realised that it is used as the C library in the GNU system and most systems with the Linux kernel. It defines the "system calls" and other basic facilities such as open, malloc, printf, exit, etc. Is there any possible solutions other than reinstall? I have lost ssh access. Maybe anything can be done using rescue cd? Thanks

    Read the article

  • How to access remote network resource from local machine

    - by jerluc
    I just configured VPN access successfully so that I now can connect to my workstation at work from my personal Linux box at home. The problem is that all of my dev files for a server I'm locally running are on my personal box and cannot be transfered to my workstation (at least not in any timely manner over this connection given the amount of data, in addition to the many reconfigurations which would be required for the server to run even if I could somehow get the files across). So essentially, I am able to run my server locally on my personal computer, however, the data-sources required for the back-end are accessible only from within the office's network. But is there some way for me to somehow either access the data-sources directly through a VPN connection or even if I need to be a bit more convoluted by connecting via VPN to my workstation and then somehow connecting to the data-sources through my workstation to my personal computer? And here I could really care less about the speed of the connection from my server to the data-sources since they will probably only be fetched a few times every hour or so. Thanks! Sorry if this a stupid question and/or doesn't make any sense! (And sorry for anyone who read this at stackoverflow, I posted it in the wrong area.)

    Read the article

  • Flash and Google Maps - Only Last Icon showing

    - by Peter
    I have a simple Map and geocoding sample in Flash using CS4 The problem is simple - I can retrieve a short list from the google search api, but when I try to generate the icons on the map using a loop, only the last icon is displayed. (ignore the house icon, it is generated earlier) I feel I am missing something or made a stupid AS3 mistake (like treating it as if it was c#) - or even a stupid wood-for-the-trees mistake. The problem is in the last line of the code. I have added all my code just in case somebody else can find a use for it - lord knows it took me a great while to figure this out :) It runs here (also, if anybody has an idea why the icon is slightly in the wrong place on render, but corrects if you move the map - please let me know) Any help would be great. Thanks. P import com.google.maps.services.ClientGeocoder; import com.google.maps.services.GeocodingEvent; import com.google.maps.LatLng; import com.google.maps.Map; import com.google.maps.MapEvent; import com.google.maps.MapType; import com.google.maps.overlays.Marker; import com.google.maps.overlays.MarkerOptions; import com.google.maps.styles.FillStyle; import com.google.maps.styles.StrokeStyle; import com.google.maps.controls.* import com.google.maps.overlays.* import flash.display.Bitmap; import flash.display.BitmapData; import com.adobe.utils.StringUtil; import be.boulevart.google.ajaxapi.search.GoogleSearchResult; import be.boulevart.google.events.GoogleApiEvent; import be.boulevart.google.ajaxapi.search.local.GoogleLocalSearch; import be.boulevart.google.ajaxapi.search.local.data.GoogleLocalSearchItem; var strZip:String = new String(); strZip="60661"; var strAddress:String = new String(); strAddress ="100 W. Jackson Blvd, chicago, IL 60661"; var IconArray:Array = new Array; var SearchArray:Array = new Array; /*-------------------------------------------------------------- // The returned search data gets placed into this array ---------------------------------------------------------------*/ var LocalInfo:Array = new Array(); var intCount:int = new int; var intMapReady:int=0; /*=================================================================================== We load the map first and then get the search criteria - this will keep the order of operation clean. The ====================================================================================*/ var map:Map = new Map(); map.key = "ABQIAAAAHwSPp7Lhew456ffD6qa2WmxT_VwdLJEfmcCgytxKjcH1jLKkiihQtfC- TbcwryvBQYhRwHWa8F_Gp9Q"; map.setSize(new Point(600, 550)); map.addEventListener(MapEvent.MAP_READY, onMapReady); //Places the map on the page this.addChild(map); map.x=5; map.y=5; function onMapReady(event:Event):void { //Center the map and place the house marker doGeocode(); } /*========================================================================== Goecode to return the LAT and LONG for the specific address, center the map and add the house icon ===========================================================================*/ function doGeocode() { var geocoder:ClientGeocoder = new ClientGeocoder(); geocoder.addEventListener(GeocodingEvent.GEOCODING_SUCCESS, function(event:GeocodingEvent):void { var objPlacemarks:Array = event.response.placemarks; if (objPlacemarks.length > 0) { map.setCenter(objPlacemarks[0].point, 14, MapType.NORMAL_MAP_TYPE); var request:URLRequest = new URLRequest("house.png"); var imageLoader:Loader = new Loader(); imageLoader.load(request); var objMarkerOptions:MarkerOptions = new MarkerOptions(); objMarkerOptions.icon=imageLoader; objMarkerOptions.icon.scaleX=.15; objMarkerOptions.icon.scaleY=.15; objMarkerOptions.iconAlignment = MarkerOptions.ALIGN_HORIZONTAL_CENTER + MarkerOptions.ALIGN_VERTICAL_CENTER; var objMarker:Marker = new Marker(objPlacemarks[0].point, objMarkerOptions); map.addOverlay(objMarker); doLoadSearch() } }); //Failure code - good practice, really geocoder.addEventListener(GeocodingEvent.GEOCODING_FAILURE, function(event:GeocodingEvent):void { txtResult.appendText("Geocoding failed"); }); // generate geocode geocoder.geocode(strAddress); } /*=============================================================== XML Loader - loads icon file and search text pair from xml file =================================================================*/ function doLoadSearch() { var xmlLoader:URLLoader = new URLLoader(); var xmlData:XML = new XML(); xmlLoader.addEventListener(Event.COMPLETE, LoadXML); xmlLoader.load(new URLRequest("config.xml")); function LoadXML(e:Event):void { xmlData = new XML(e.target.data); RetrieveSearch(); } function RetrieveSearch() { //extract the MapData subset var xmlSearch = xmlData.MapData; // push this to an xml list object var xmlChildren:XMLList = xmlSearch.children(); //loop the list and extract the data into an //array of formatted search criteria for each (var Search:XML in xmlChildren) { txtResult.appendText("Searching For: "+Search.Criteria+" Icon=" + Search.Icon+ "Zip=" + strZip +"\r\n\r\n"); //retrieve search criteria loadLocalInfo(Search.Criteria,Search.Icon,strZip); } } } /*================================================================================== Search Functionality - does a google API search and loads the lats and longs required to place the icons on the map - THIS WILL NOT RUN LOCALLY ===================================================================================*/ function loadLocalInfo(strSearch,strIcon,strZip) { var objLocal:GoogleLocalSearch=new GoogleLocalSearch() objLocal.search(strSearch+" "+strZip,0,"0,0","","") objLocal.addEventListener(GoogleApiEvent.LOCAL_SEARCH_RESULT,onSearchComplete) function onSearchComplete(e:GoogleApiEvent):void { var resulta:GoogleSearchResult=e.data as GoogleSearchResult; //------------------------------------------------ // Load the icon for this particular search //------------------------------------------------ var request:URLRequest = new URLRequest(strIcon); var imageLoader:Loader = new Loader(); imageLoader.load(request); //------------------------------------------------------------- // For test purposes txtResult.appendText("Result Count for "+strSearch+" = "+e.data.results.length+"\r\n\r\n"); for each (var result:GoogleLocalSearchItem in e.data.results as Array) { LocalInfo[intCount]=[String(result.title),strIcon,String(result.latitude),String(result.longitude)]; //--------------------------------------- // Pop the icon onto the map //--------------------------------------- var objLatLng:LatLng = new LatLng(parseFloat(result.latitude), parseFloat(result.longitude)); var objMarkerOptions:MarkerOptions = new MarkerOptions(); objMarkerOptions.icon=imageLoader; objMarkerOptions.hasShadow=false; objMarkerOptions.iconAlignment = MarkerOptions.ALIGN_HORIZONTAL_CENTER + MarkerOptions.ALIGN_VERTICAL_CENTER; var objMarker:Marker = new Marker(objLatLng, objMarkerOptions); /********************************************************** *Everything* works to here - I have traced out execution and all variables. It only works on the last item in the array :( ***********************************************************/ map.addOverlay(objMarker); } } }

    Read the article

  • reset locale in debian under Squeeze

    - by si2w
    I have problems with locale in debian. I tried many thing but it doesn't anything for me : locale -a locale: Cannot set LC_CTYPE to default locale: No such file or directory C POSIX en_US.utf8 I try to set en_US.utf8 without success with this :dpkg-reconfigure locales -plow perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US", LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory /usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory /usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory Generating locales (this might take a while)... en_US.UTF-8... done Generation complete. perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US", LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US", LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). After reboot, i try to use a perl script : perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US", LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Here is my /etc/default/locale config file : cat /etc/default/locale LANG=en_US.UTF-8 LANGUAGE=en_US Any idea to solve this (stupid) problem ? Thanks

    Read the article

  • So who decided VGA cables should be symetrical ? [closed]

    - by mgb
    < rant So who decided that VGA cables should be the same gender connector at both ends? I just spent an hour trying to fix a server that would apparently boot but wouldn't display any post messages - I needed to change some bios settings. The monitor gives me a helpful error message - "unable to display this resolution". Wondering how it can't show simple VGA res, I reset the bios, when that doesn't work I remove the BIOS battery. The system is in a rack with a keyboard and monitor mounted 6ft away - with the cable running through the normal waist thick rats nest of wiring of wiring. The monitor worked with another system, so it and the VGA cable are good, I brought in another monitor and tried that - still nothing. Eventually I ripped the rack apart to discover that the other end of the VGA connector I was trying to plug into the server was actually plugged into another server box ! And the second monitor I was testing was plugged into the first monitor. An error message like - "I'm actualy plugged into another monitor stupid" - would be useful. So would having a connector with a male end and a female end. < end rant - thank you

    Read the article

  • Is Unix a PC Operating system?

    - by Corelgott
    I have got kind of a stupid question. I am doing my bachelor at a university. In a wirtten assigment a prof posted the task: "Name 3 PC-Operating Systems:" Well, I went on an included a variety of OS (Linux, Windows, Osx) including Unix & Solaris. Today I recieved a mail from my prof saying: "Unix is not a PC-Operating System. Many Unix-Variants are not PC-Hardware-Compatible (like AIX & HP-UX. About Solaris: there was one PC-Compatible version...)" I am kind of suprised: Even if may Unix-Variants are Power-PC and different bit-order – Those don't stop beeing PCs right now? The question was given in a written assigment! It was not a question that came up during lecture! Due to the original postest task being in German, I'll include it just to make sure, that nobody suspects an error in the translation... "Nennen Sie 3 PC-Betriebssysteme:" Response / Antwort: "Unix ist kein PC-Betriebssystem, viele Unix-Varianten sind nicht auf PC-Hardware lauffähig (AIX, HP-UX). Von Solaris gab es mal eine PC-Variante." Anybody got something on that? Thx & Cheers Corelgott

    Read the article

  • How important is dual-gigabit lan for a super user's home NAS?

    - by Andrew
    Long story short: I'm building my own home server based on Ubuntu with 4 drives in RAID 10. Its primary purpose will be NAS and backup. Would I be making a terrible mistake by building a NAS Server with a single Gigabit NIC? Long story long: I know the absolute max I can get out of a single Gigabit port is 125MB/s, and I want this NAS to be able to handle up to 6 computers accessing files simultaneously, with up to two of them streaming video. With Ubuntu NIC-bonding and the performance of RAID 10, I can theoretically double my throughput and achieve 250MB/s (ok, not really, but it would be faster). The drives have an average read throughput of 83.87MB/s according to Tom's Hardware. The unit itself will be based on the Chenbro ES34069-BK-180 case. With my current hardware choices, it'll have this motherboard with a Core i3 CPU and 8GB of RAM. Overkill, I know, but this server will be doing other things as well (like transcoding video). Unfortunately, the only Mini-ITX boards I can find with dual-gigabit and 6 SATA ports are Intel Atom-based, and I need more processing power than an Atom has to offer. I would love to find a board with 6 SATA ports and two Gigabit LAN ports that supports a Core i3 CPU. So far, my search has come up empty. Thus, my dilemma. Should I hold out for such a board, go with an Atom-based solution, or stick with my current single-gigabit configuration? I know there are consumer NAS units with just one gigabit interface (probably most of them), but I think I will demand a lot more from my server than the average home user. Any advice is appreciated. Thanks.

    Read the article

  • Setting up port forwarding for web server

    - by reyjavikvi
    This could belong on Super User, but I thought this place was more appropiate. I want to run Apache in my computer and want to make it available to the outside world to test a couple things. Apparently, I have to go into my router's (a TP-LINK TD 8910G) settings and forward port 80 to my PC's IP. So far so good. Thing is, since the router uses a web based interface and it's kind of stupid, it told me that since I was using port 80 for this, I should access its settings through port 8080. Maybe it can't detect requests coming from the LAN, I don't know. Point is, now neither port can't access the configuration, and I can't access Internet. Specifically, trying to access anything (including 192.168.1.1, the router's settings) through port 80 turns up a blank page (maybe if I had the server running in my computer I'd get something, but I don't want to risk trying, I had to reset the router and restore the settings), and port 8080 gives a "Can't establish connection" error in Firefox (and similar ones in other browsers). Is there a way to configure the router to not redirect requests coming from inside the network? I'm a beginner with this stuff, so please try to explain in a simple way. If this is more appropiate in Super User, I'm sorry.

    Read the article

  • Change Windows 7 Explorer's Details Pane limits

    - by Paul
    For some reason, MS decided to completely kill the status bar's functionality in Win7 (and maybe Vista, but I don't know for sure). I have tried all possible options such as Classic Shell and so on. Basically, the one thing I miss most is seeing at a glance the total size of my selected files. I know I can press Alt+Enter or whatever, but that's not the point. The point is that the so-called 'details' pane stops providing details if more than 15 files are selected! WTH? Cannot understand the reason behind such a stupid arbitrary limit, that doesn't seem to be user-configurable at all. Anyway, what I'm looking for is a way to change that limit, either via the registry or otherwise. If changing the limit isn't possible, would it be possible for some programming genius to create a very small optimized light-weight non resource-hungry (you get the idea!) program whose sole purpose will be to automatically click the "Show more details..." link in the details pane after every file selection? For bonus points, the program should wait for a second or two after file selection is complete to do this, so that selecting multiple files in quick succession doesn't hit the HDD repeatedly. Any takers for the challenge? :)

    Read the article

  • PEAP validating a secondary domain suffix

    - by sam
    Probably the title is a little bit confusing, let me explain the situation. Our company wants to implement a corporate wireless lan with PEAP authentication. unfortunately someone made a big mistake in our AD design 10 years ago. The domain name we are using "company.ch" is not owned by company but by someone else. so it is not possible to issue a public SSL certificate for the RADIUS server. Our AD is to big to rename it. We already thought about using our private PKI and rollout the CA certificate via GPO but that would only cover our corporate managed clients but not the BYOD (Smartphones, Tablets, Laptops..) Is there a way to add a secondary domain name like “company2.ch” and issue a public certificate and join that radius to that secondary domain aslwell, and configure that secondary dns suffix via DHCP for all the client pools... or is there another way with for example a new radius server which has his own domain company2.ch which is connected with some kind of trust between the company.ch doamin? sorry i'am not a client server guy.. hopefully you get my drift.!?

    Read the article

  • chrooted sftp user with write permissions to /var/www

    - by matthew
    I am getting confused about this setup that I am trying to deploy. I hope someone of you folks can lend me a hand: much much appreciated. Background info Server is Debian 6.0, ext3, with Apache2/SSL and Nginx at the front as reverse proxy. I need to provide sftp access to the Apache root directory (/var/www), making sure that the sftp user is chrooted to that path with RWX permissions. All this without modifying any default permission in /var/www. drwxr-xr-x 9 root root 4096 Nov 4 22:46 www Inside /var/www -rw-r----- 1 www-data www-data 177 Mar 11 2012 file1 drwxr-x--- 6 www-data www-data 4096 Sep 10 2012 dir1 drwxr-xr-x 7 www-data www-data 4096 Sep 28 2012 dir2 -rw------- 1 root root 19 Apr 6 2012 file2 -rw------- 1 root root 3548528 Sep 28 2012 file3 drwxr-x--- 6 www-data www-data 4096 Aug 22 00:11 dir3 drwxr-x--- 5 www-data www-data 4096 Jul 15 2012 dir4 drwxr-x--- 2 www-data www-data 536576 Nov 24 2012 dir5 drwxr-x--- 2 www-data www-data 4096 Nov 5 00:00 dir6 drwxr-x--- 2 www-data www-data 4096 Nov 4 13:24 dir7 What I have tried created a new group secureftp created a new sftp user, joined to secureftp and www-data groups also with nologin shell. Homedir is / edited sshd_config with Subsystem sftp internal-sftp AllowTcpForwarding no Match Group <secureftp> ChrootDirectory /var/www ForceCommand internal-sftp I can login with the sftp user, list files but no write action is allowed. Sftp user is in the www-data group but permissions in /var/www are read/read+x for the group bit so... It doesn't work. I've also tried with ACL, but as I apply ACL RWX permissions for the sftp user to /var/www (dirs and files recursively), it will change the unix permissions as well which is what I don't want. What can I do here? I was thinking I could enable the user www-data to login as sftp, so that it'll be able to modify files/dirs that www-data owns in /var/www. But for some reason I think this would be a stupid move securitywise.

    Read the article

  • Application (was Firefox) crash on first load on Ubuntu Linux on older Dell Laptop

    - by Ira Baxter
    I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then (WAS: everything stops: icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. EDIT : on further investigation, spinning icon, mouse operated by touchpad freeze. There's apparantly a little disk activity occuring about every 5 seconds. I wait 5-10 minutes, behavior doesn't change) A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in). EDIT: I tried to run the Disk manager tool, not that I cared what it was, just a menu-available application. It started up like Firefox, I get a little tag in the lower left saying Disk P*** something had started, and then the same behavior as Firefox. At this point, I don't think its the Ethernet. Is it possible that the Ubuntu disk driver can't handle the disk controller in this older laptop? The install seemed to go fine.

    Read the article

  • FTP issues with Windows 2003 box and Filezilla

    - by vanhornRF
    We've set up a Windows 2003 server with IIS 6 and the FTP is Filezilla. I'm not a sys admin by any means and neither is my other developer. I'm trying to connect to FTP on a Mac with a Cyberduck FTP client. I'm running OSX 10.6.3. The problem is that I can connect to the FTP address, but when I do it will hang for a minute or two trying to list the directories. This address is pointed to the webroot folder so it's only trying to list the pertinent folders for the site we're working on. Eventually after a minute or two it will go through and list everything and then if you try and open a file or another folder, it will hang again and then eventually list the folders. My question: Is there some stupid default setting we're missing? Is this a common occurrence? Like I said I'm not a sys admin at all and I'm sure I'm missing some valuable questions for anyone that reads this, so please fire away if you can help and you need more info, I'll do my best to provide it. Thanks!

    Read the article

  • correct file permissions for trac and git user to access gitolite server repos

    - by klemens
    hi, sounds like a stupid questions (to me), but i couldn't find any info. on my server i host some git repositories via gitolite, and have a trac for every repository. i have a user called git to push/pull from server (git clone git@server:repo). and trac is a apache vhost with mod_wsgi. this runs with the www-data user. so what riddles me (maybe because I have not much of a clue about file-permissions at all) is whats the best permissions setup (chown, chmod) for the git repositories (/home/git/repositories/...). www-data (or trac) needs to at least read permissions (i think). and git (or gitolite) needs obviously read/write permissions to push changesets. i tried a little bit around (i.e. adding www-data and/or git to the www-data/git group), but didn't got it right. at least one of the two don't work (git or trac). any suggestions are highly appreciated. regard, klemens

    Read the article

  • How should I configure nginx caching headers for a "baked" static file blog? (Octopress)

    - by Doug Stephen
    I recently deployed an Octopress blog (which is a blogging platform built around Jekyll). It's a static-site blog generator, with no dynamic content or databases to muck about with. It's being served up by nginx. My question is, what is the appropriate expires directive or Cache-Control header that I should set to make sure that visitors get the most up-to-date version of the site when they visit without having to manually refresh? Since the site is just .html files it seems to get cached pretty aggressively. I've tried a million different combinations of expires modified + xxxx and even straight up expires off but I can't seem to wrap my head around it. I'm very new to dealing with caching like this, specifically, on static files that change frequently, and obviously if the site hasn't been changed then I'd like for it to be served up out of the cache. Update (still not solved though): I found open_file_cache, tweaked that. Still no dice. It seems like what I might want to do is use nginx as a proxy cache and use Apache with ETags? Is there really no convenient way to make nginx play nicer with conditional requests from the client? TL;DR: I'm running a static-file blog and I'd like to set up nginx to only serve from the cache if the blog hasn't been updated recently, but I'm too stupid to figure it out myself because I'm relatively new to web servers.

    Read the article

  • Blocking an IP from connecting

    - by Sam W.
    I have a problem with my Apache webserver where there's and IP than connecting to my server, using alot of connection and wont die which eventually making my webserver timeout. The connection will stay as SYN_SENT state if I check using netstat -netapu I even flush my iptables and use the basic rules and it still doesn't work. The IP will get connected when I start my Apache Basic rules that I use: iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT iptables -A INPUT -s 89.149.244.117 -j REJECT iptables -A OUTPUT -s 89.149.244.117 -j REJECT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A INPUT -p tcp --dport 21 -j ACCEPT iptables -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT iptables -A INPUT -j REJECT iptables -A FORWARD -j REJECT The bold part is rule in question. Not sure this is related but tcp_syncookies value is 1. Can someone point out my mistake? Is there a way to block it for good. Thank you

    Read the article

  • (manually configured) kernel update leaves wireless in a mess

    - by Mala
    I recently upgraded my kernel from 2.6.31-gentoo-r6 to 2.6.32-gentoo-r7. In both cases, I configured everything manually. However, since the upgrade, my wireless card appears to be on the fritz. It will connect to networks just fine, and remain connected, but can only access the internet (and other hosts on the network) for about 3 seconds after connecting. Reconnecting to the network appears to fix the problem... for another 3 seconds or so. The problem is "solved" by booting into the older kernel. The relevant lspci entry is 02:00.0 Network controller: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection I'm pretty sure I have the correct drivers enabled in the kernel Device Drivers ---> Network device support ---> Wireless LAN (IEEE 802.11) ---> <*> Intel Wireless Wifi [*] Enable LED support in iwlagn and iwl3945 drivers [*] Enable Spectrum Measurement in iwlagn driver [*] Enable full debugging output in iwlagn and iwl3945 drivers <*> Intel Wireless WiFi Next Gen AGN (iwlagn) [*] Intel Wireless WiFi 4965AGN [*] Intel Wireless WiFi 5000AGN; Intel WiFi Link 1000, 6000, and 6050 Series I tried with the other intel drivers enabled as well (iwl3945) and no difference. Is there something stupid I'm missing? Is there something I have to recompile after upgrading the kernel (a la nvidia)? Thanks Mala

    Read the article

  • Apache inflate application/ with mod_filter

    - by BGT
    I need to prevent pdf objects from being gzipped. Really, this only needs to take place if the request is from the Mozilla browser (but since I can't get something as seemingly simple as no-gzip for application/pdf, I figure it's wiser to start there). From looking at the apache documentation on mod_filter, I've got the following: <Location /> FilterDeclare gzipDeflate CONTENT_SET FilterDeclare gzipInflate CONTENT_SET FilterProvider gzipDeflate deflate req=User-Agent $Mozilla/ FilterProvider gzipInflate inflate resp=Content-Type $application/ FilterChain +gzipDeflate +gzipInflate </Location> From my testing, the gzipDeflate filter is doing its job and all the pages without the Content-Type starting with application are being gzipped. But, the gzipInflate doesn't seem to be working at all. I've inspected the response in Firebug and verified that the Content-Type being sent down is application/pdf. I'll go ahead and ask a potentially stupid question though: The response's Content-Type header in its entirety read "application/pdf; charset=Windows-1252". Does that make any sort of difference or is $application/ presumably enough to catch that? Any help is greatly appreciated. One other point, the URL that returns the pdf object does not have the .pdf extension. The pdf itself is stored in an Oracle database as a blob and appended to the page when appropriate (all the urls in the system use the same baseline). This was part of an original inquiry by a helpful member at stackoverflow who pointed me towards mod_filter and suggested I post the question here.

    Read the article

  • Broken Python installation on CentOS 5.8

    - by Beckett
    I already searched for solution to my problem via Google and stackoverflow's search facility, but haven't found anything related specifically to it. Here's the problem: I needed python 2.7.3 on CentOS 5.8 machine which has only python 2.4.3 preinstalled. Also neither there's the suitable version in it's repositories nor I can upgrade installed version. That's why I decided to build python from source code. But I've made a mistake: instead of make altinstall I did make install thus changing default version of the current installation. It was before I found this article - How to install Python 2.7.3 on CentOS 6.2 . I guess 5.8 and 6.2 versions aren't different to the extent this article is inapplicable. After installation of new python version I installed pip, but once I tried to invoke it, I got "No module named pkg_resources" error. In order to solve this issue I installed setuptools from repository. But it had only led to another error: "Distribution Not Found". My final step was to follow the guide I posted the link to, but I was unable to perform last step: easy_install-2.7 virtualenv command threw "-bash: /usr/local/bin/easy_install-2.7: .: bad interpreter: Permission denied" error. Now when I try to invoke pip or pip-2.7 both commands raise the same error with different names of binaries after "-bash:". Is there any way to fix this problem, so I could install new python version (2.7.3) alongside with the preinstalled one (2.4.3) according to the guide? Any help will be appreciated. P.S.: yum is working fine, although it needs python to function, so I hope the damage I unknowingly caused isn't very severe. Also I'm not a native English speaker, so I apologize for possible occasional grammatical and/or spelling errors.

    Read the article

  • Subdocument in Word won't save

    - by ChrisW
    Because I know Word has a history of not liking very large documents (my supervisor specifically told me not to use LaTeX... grr), I decided to learn the Master document / subdocument feature of Word when writing my PhD thesis. I have the title page / table of contents etc in the master document, and each chapter as a separate document. However, when I save the master document, it appears to save all the chapter documents apart from one (Chapter 4), for which it brings up the Save Document dialog box, helpfully with "Chapter4.docx" in the "Save as" box (n.b. Chpater4.dox is not open). Clicking save does nothing, and doesn't make the dialog box go away. Saving as a different document means that my changes aren't reflected in the same document. There must be some reason Word doesn't like this particular document but I've got no idea why - there's nothing special in it that isn't in any of the other chapters. I have tried closing all documents, renaming Chapter4.docx, opening the master document, expanding all documents, OKing the warning that Chapter4.dox does not exist, and inserting the 'new' document, but even when I save the master document it still won't save the new Chapter4 document. If anyone knows any reason why Word is acting like this (or if I'm doing anything stupid), I'll be eternally grateful (p.s. sorry for the long rambling message. It's late; I've been working on my PhD 4.5 years, I really really want to throw this computer out the window, and I hope people are kind enough not to downvote this question because of it's rambling nature!) Update With Word closed, I've tried to delete Chapter4.docx (having made a backup!) - but I get a warning that it can't be deleted because it's open in Microsoft Word... these files are on a network drive and the same problems are happening on 2 different computers. I could login to the filestore through ssh and force the file to be deleted, but I'm curious to know why this is happening!

    Read the article

  • PHP 5.4.9 Mysqli issue

    - by Vitaly
    On Ubuntu 12.04 server I had PHP 5.4.9 installed from the source: ./configure --prefix=/etc/php --with-apxs2=/etc/apache2/bin/apxs --with-config-file-path=/etc/php --with-config-file-scan-dir=/etc/php/conf.d --with-libxml-dir=/usr/local/libxml2 --with-xsl=/usr/local/libxslt --with-mysql --with-zlib --with-pdo-mysql --enable-calendar --with-gd --with-iconv-dir --enable-mbstring --enable-soap --enable-sockets --enable-zip --with-curl --with-openssl --with-kerberos --with-tidy' Then, using apt-get, I had mysql server and phpMyAdmin installed. Unfortunatelly phpMyAdmin keep saying that 'mysqli' and 'mcrypt' not installed. php -m | grep mysqli just confirms it. So I tried to install mysqli with "apt-get install php5-mysqli", but just got message to do it by means of "php5-mysqlnd" or "php5-mysql". Even though they are already installed (according to phpinfo()) I tried - doesn't work. However, in php.ini, there's mysqli staff like "extension=php_mysqli.dll", but no "extension=mysqli.so". And block [MySQLi] with some uncommented settings also present. Since this is my first attempt to build php from source I reckon I did some silly mistake. Any help is greatly appreciated.

    Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >