Search Results

Search found 7804 results on 313 pages for 'bin chen'.

Page 81/313 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • Removing old kernel entries in Grub

    - by To Do
    I regularly delete old kernels leaving only the latest two entries using Synaptic. I'm using Precise. However in my Grub "previous Linux version" menu there are quite a few entries labelled 2.6.8. I cannot find these linux-images in Synaptic. dpkg -l | grep linux-image Gives: rc linux-image-3.0.0-17-generic 3.0.0-17.30 Linux kernel image for version 3.0.0 on x86/x86_64 ii linux-image-3.2.0-27-generic 3.2.0-27.43 Linux kernel image for version 3.2.0 on 32 bit x86 SMP ii linux-image-3.2.0-29-generic 3.2.0-29.46 Linux kernel image for version 3.2.0 on 32 bit x86 SMP ii linux-image-3.4.0-030400-generic 3.4.0-030400.201205210521 Linux kernel image for version 3.4.0 on 32 bit x86 SMP ii linux-image-generic 3.2.0.29.31 Generic Linux kernel image Sudo update-grub gives: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.4.0-030400-generic Found initrd image: /boot/initrd.img-3.4.0-030400-generic Found linux image: /boot/vmlinuz-3.2.0-29-generic Found initrd image: /boot/initrd.img-3.2.0-29-generic Found linux image: /boot/vmlinuz-3.2.0-27-generic Found initrd image: /boot/initrd.img-3.2.0-27-generic Found linux image: /boot/vmlinuz-2.6.38-11-generic Found initrd image: /boot/initrd.img-2.6.38-11-generic Found linux image: /boot/vmlinuz-2.6.38-10-generic Found initrd image: /boot/initrd.img-2.6.38-10-generic Found linux image: /boot/vmlinuz-2.6.38-8-generic Found initrd image: /boot/initrd.img-2.6.38-8-generic Found memtest86+ image: /boot/memtest86+.bin Found Windows Vista (loader) on /dev/sda1 sudo apt-get remove linux-image-2.6.8-8-generic gives: E: Unable to locate package linux-image-2.6.8-8-generic E: Couldn't find any package by regex 'linux-image-2.6.8-8-generic' My boot folder contains the following: abi-2.6.38-10-generic initrd.img-3.4.0-030400-generic abi-2.6.38-11-generic memtest86+.bin abi-2.6.38-8-generic memtest86+_multiboot.bin abi-3.2.0-27-generic System.map-2.6.38-10-generic abi-3.2.0-29-generic System.map-2.6.38-11-generic abi-3.4.0-030400-generic System.map-2.6.38-8-generic config-2.6.38-10-generic System.map-3.2.0-27-generic config-2.6.38-11-generic System.map-3.2.0-29-generic config-2.6.38-8-generic System.map-3.4.0-030400-generic config-3.2.0-27-generic vmcoreinfo-2.6.38-10-generic config-3.2.0-29-generic vmcoreinfo-2.6.38-11-generic config-3.4.0-030400-generic vmcoreinfo-2.6.38-8-generic extlinux vmlinuz-2.6.38-10-generic grub vmlinuz-2.6.38-11-generic initrd.img-2.6.38-10-generic vmlinuz-2.6.38-8-generic initrd.img-2.6.38-11-generic vmlinuz-3.2.0-27-generic initrd.img-2.6.38-8-generic vmlinuz-3.2.0-29-generic initrd.img-3.2.0-27-generic vmlinuz-3.4.0-030400-generic initrd.img-3.2.0-29-generic and ls -l /etc/grub.d yields: total 56 -rwxr-xr-x 1 root root 6715 Apr 17 20:16 00_header -rwxr-xr-x 1 root root 5522 Oct 1 2011 05_debian_theme -rwxr-xr-x 1 root root 7407 May 17 09:22 10_linux -rwxr-xr-x 1 root root 6335 Apr 17 20:16 20_linux_xen -rwxr-xr-x 1 root root 1588 May 3 2011 20_memtest86+ -rwxr-xr-x 1 root root 7603 Apr 17 20:16 30_os-prober -rwxr-xr-x 1 root root 214 Oct 1 2011 40_custom -rwxr-xr-x 1 root root 95 Oct 1 2011 41_custom -rw-r--r-- 1 root root 483 Oct 1 2011 README gdisk -l /dev/sda yields: Partition table scan: MBR: MBR only BSD: not present APM: not present GPT: not present *************************************************************** Found invalid GPT and valid MBR; converting MBR to GPT format. *************************************************************** Disk /dev/sda: 312581808 sectors, 149.1 GiB Logical sector size: 512 bytes Disk identifier (GUID): F832A498-05E1-4615-B5B1-757ACB4A757A Partition table holds up to 128 entries First usable sector is 34, last usable sector is 312581774 Partitions will be aligned on 2048-sector boundaries Total free space is 4183661 sectors (2.0 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 61442047 29.3 GiB 0700 Microsoft basic data 3 163842048 169986047 2.9 GiB 8200 Linux swap 4 169986048 312578047 68.0 GiB 0700 Microsoft basic data 5 61444096 159666175 46.8 GiB 8300 Linux filesystem Please help with removing the old and inexistent kernels from Grub.

    Read the article

  • Bash completion doesn't work, or is ignoring what I've typed; but works for commands

    - by Neil Traft
    Bash completion seems to be ignoring what I've typed (it tries to complete, but acts as if there's nothing under the cursor). I know I saw it work on this machine earlier today, but I'm not sure what has changed. Some examples: cd shows all directories under my current folder: $ cd co<tab><tab> cmake/ config/ doc/ examples/ include/ programs/ sandbox/ src/ .svn/ tests/ Commands like ls and less show all files and directories under my current folder: $ ls co<tab><tab> cmake/ config/ .cproject Doxyfile.in include/ programs/ README.txt src/ tests/ CMakeLists.txt COPYING.txt doc/ examples/ mainpage.dox .project sandbox/ .svn/ Even when I try to complete things from a different folder, it gives me only the results for my current folder (telling me that it is completely ignoring what I've typed): $ cd ~/D<tab><tab> cmake/ config/ doc/ examples/ include/ programs/ sandbox/ src/ .svn/ tests/ But it seems to be working fine for commands and variables: $ if<tab><tab> if ifconfig ifdown ifnames ifquery ifup $ echo $P<tab><tab> $PATH $PIPESTATUS $PPID $PS1 $PS2 $PS4 $PWD $PYTHONPATH I do have this bit in my .bashrc, and I have confirmed that my .bashrc is indeed getting sourced: if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi I've even tried manually executing that file, but it doesn't fix the problem: $ . /etc/bash_completion There was even one point in time where it was working for ls, but was not working for cd ... but I can't replicate that result now. Update: I also just discovered that I have terminals open from earlier that still work. I ran source .bashrc in one of them and afterwards completion was broken. Here is my .bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # # Modified by Neil Traft #source ~/.profile # Allow globs to expand hidden files shopt -s dotglob nullglob # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines or lines starting with space in the history. # See bash(1) for more options HISTCONTROL=ignoreboth # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # If set, the pattern "**" used in a pathname expansion context will # match all files and zero or more directories and subdirectories. #shopt -s globstar # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # Color the prompt export PS1="\[$(tput setaf 2)\]\u@\h:\[$(tput setaf 5)\]\W\[$(tput setaf 2)\] $\[$(tput sgr0)\] " # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi

    Read the article

  • Start fail VMware-Player 3.1.5 on Ubuntu 12.04 32bit

    - by Chris Lee
    Install got no problem but at start of VMWare Player it want to compile and exit with this error: "Unable to build kernel module." Thats the log: Jun 05 00:03:36.153: app-3075712704| Log for VMware Workstation pid=3709 version=7.1.5 build=build-491717 option=Release Jun 05 00:03:36.153: app-3075712704| The process is 32-bit. Jun 05 00:03:36.153: app-3075712704| Host codepage=UTF-8 encoding=UTF-8 Jun 05 00:03:36.153: app-3075712704| Logging to /tmp/vmware-root/setup-3709.log Jun 05 00:03:36.284: app-3075712704| modconf query interface initialized Jun 05 00:03:36.284: app-3075712704| modconf library initialized Jun 05 00:03:36.336: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.350: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.371: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.417: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.429: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.521: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.526: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.529: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.533: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.536: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.579: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.583: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.586: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.589: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.593: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.602: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.624: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:39.677: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.689: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.694: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.697: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.701: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.711: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:39.733: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:39.854: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.858: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.862: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.865: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.868: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:40.065: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:40.066: app-3075712704| Building module vmmon. Jun 05 00:03:40.066: app-3075712704| Extracting the sources of the vmmon module. Jun 05 00:03:40.075: app-3075712704| Building module with command: /usr/bin/make -C /tmp/vmware-root/modules/vmmon-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-24-generic-pae/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 Jun 05 00:03:42.016: app-3075712704| Failed to compile module vmmon! Is it a gcc problem ?

    Read the article

  • GoldenGate 12c - MySQL Active-Active Replication Setup

    - by Jinyu Wang-Oracle
    Active-active  (also called Master-Master or Bi-Directional) replication captures data changes from two or more systems and replicat the changes to synchronize the data.  Active-Active replication is often needed for high availability, load balancing and scaling out purposes.   Oracle GoldenGate is known to be one of the first and the best replication tool handling active-active replications. As of Oracle GoldenGate 12c, it provides (Refer to Oracle GoldenGate 12.1.2 Documentation - Configuring Oracle GoldenGate for Active-Active High Availability for more information) the followings: Robust loop-back prevention Comprehensive conflict resolution and detection support Heterogeneous support across different database versions and operation systems.  Oracle GoldenGate supports active-active configurations for DB2 on z/OS, LUW, and IBM i, MySQL, Oracle, SQL/MX,SQL Server, Sybase, and Teradata. However, the setup is different from database to database. In this example, I will show you how to setup an active-active data replication between two MySQL database instances. The example setup below is to have active-active replication between MySQL 5.5 and MySQL 5.6 instances and is shown as follows: MySQL 5.5 (Manager Port: 15105)  Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3305 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, PASSWORD mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl REPORTROLLOVER AT 05:30 ON saturday TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15106, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3305 targetdb test, userid root, password mysql sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge REPERROR (DEFAULT, ABEND) REPERROR(1062, IGNORE) map test.TCUSTMER, target test.TCUSTMER,colmap(usedefaults, region_code="region code"); map test.TCUSTORD, target test.TCUSTORD; MySQL 5.6 (Manager Port: 15106) Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3306 targetdb test, userid root, password mysql --assumetargetdefs sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge map test.TCUSTMER, target test.TCUSTMER, colmap(usedefaults, "region code"=region_code); map test.TCUSTORD, target test.TCUSTORD; Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3306 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, USERID mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/usr/local/mysql56/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15105, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; The setup parameters are quite self-explanatory. The key setup is to avoid the replication data  looping. Oracle GoldenGate for MySQL uses the information in the replication checkpoint table to identify the transaction applied by replicats and thus avoid extracting those transactions by Oracle GoldenGate extracts. The example setup in the extract in MySQL 5.5 instance is shown as follows.  TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl Setting up an active-active replication is often more complicated than this and requires the following additional considerations. I would elaborate on this in the follow-up discussions. 

    Read the article

  • Migrating a WebLogic Domain from a 32 to a 64 bit JVM/Architecture

    - by adejuanc
    Currently on 32 bit OS which presents a physical constraint when trying to allocate memory. By limit, a 32 bit OS, will not be able to allocate more than 3 GB on a Linux environment, or 2 GB for Windows environment (not considering Physical Address Extension (PAE) implementation, which can increase the maximum allocatable memory). When this limit is reached, a migration to a 64 bit architecture is recommended. Below are the steps on how to install a 64 WebLogic Server version, along with a 64 Bit JVM and then how to migrate the domain to this new environment. Weblogic Server Version: WebLogic Server Version: 10.3.4.0 OS: Linux adejuan-cl.cl.oracle.com 2.6.18-194.el5 #1 SMP Mon Jan 01 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux JVM:java version "1.6.0_22" Java(TM) SE Runtime Environment (build 1.6.0_22-b04) Oracle JRockit(R) (build R28.1.1-13-139783-1.6.0_22-20101206-0136-linux-x86_64, compiled mode) To create migration template: 1. Execute $<WLS_HOME>/wlserver_10.3/common/bin/config_builder.sh 2. Create Domain Template. 3. Select Domain to migrate. 4. Enter the name of template and other info. Click next. 5. Using Add Button, Select libraries you want to add under lib folder. copy jdbc data sources you would like to have under config/jdbc folder. If you want to have log4j configuration, copy log4j.xml under domain_root folder. 6. Select data base for the domain and click next. 7. Enter Admin Server Name and port numbers. Click next. 8. Enter username and password. Click next. Select No if you don want to add users/groups/roles 9. Click next until reach button create. This will create a jar file that is needed for the next action plan. To install and migrate domain to 64 bit architecture. 1. Install JVM Jrockit R28.1.1.13 on environment. (uncompress zip folder on a known location) 2. Go to JRockit_Home/bin and execute $ java -d64 -jar wls1034_generic.jar 3. When prompt, select JRockit JVM in browse menu, and wait for installation to finish. 4. Go to <WLS_HOME>/wlserver_10.3/common/bin and execute $ ./config.sh 5. Select Create a new Weblogic domain 6. Select Base this domain on an existing template and select browse. 7. Select jar file created on previous action plan. 8. Select Name of domain. Maintain in most cases. 9. Select user name and password. Maintain in most cases. 10. Select Jrockit SDK 1.6.0_22 and click next. 11. Confirm all JMS/JDBC/security configuration. 12. On select Optional Configuration, reconfigure if necessary. 13. Check on Configuration summary for all domain configuration. 14. Click on create, to finish up domain import. Note: Always when installing a 64 bit WLS, it's necessary to install first the 64 JVM and then run the generic installer with the -d64 bit option. If this is not performed, the installation will be the 32 default version. For more information, please refer: http://download.oracle.com/docs/cd/E13188_01/jrockit/docs50/dev_faq.html#pae

    Read the article

  • AuthnRequest Settings in OIF / SP

    - by Damien Carru
    In this article, I will list the various OIF/SP settings that affect how an AuthnRequest message is created in OIF in a Federation SSO flow. The AuthnRequest message is used by an SP to start a Federation SSO operation and to indicate to the IdP how the operation should be executed: How the user should be challenged at the IdP Whether or not the user should be challenged at the IdP, even if a session already exists at the IdP for this user Which NameID format should be requested in the SAML Assertion Which binding (Artifact or HTTP-POST) should be requested from the IdP to send the Assertion Which profile should be used by OIF/SP to send the AuthnRequest message Enjoy the reading! Protocols The SAML 2.0, SAML 1.1 and OpenID 2.0 protocols define different message elements and rules that allow an administrator to influence the Federation SSO flows in different manners, when the SP triggers an SSO operation: SAML 2.0 allows extensive customization via the AuthnRequest message SAML 1.1 does not allow any customization, since the specifications do not define an authentication request message OpenID 2.0 allows for some customization, mainly via the OpenID 2.0 extensions such as PAPE or UI SAML 2.0 OIF/SP allows the customization of the SAML 2.0 AuthnRequest message for the following elements: ForceAuthn: Boolean indicating whether or not the IdP should force the user for re-authentication, even if the user has still a valid session By default set to false IsPassive Boolean indicating whether or not the IdP is allowed to interact with the user as part of the Federation SSO operation. If false, the Federation SSO operation might result in a failure with the NoPassive error code, because the IdP will not have been able to identify the user By default set to false RequestedAuthnContext Element indicating how the user should be challenged at the IdP If the SP requests a Federation Authentication Method unknown to the IdP or for which the IdP is not configured, then the Federation SSO flow will result in a failure with the NoAuthnContext error code By default missing NameIDPolicy Element indicating which NameID format the IdP should include in the SAML Assertion If the SP requests a NameID format unknown to the IdP or for which the IdP is not configured, then the Federation SSO flow will result in a failure with the InvalidNameIDPolicy error code If missing, the IdP will generally use the default NameID format configured for this SP partner at the IdP By default missing ProtocolBinding Element indicating which SAML binding should be used by the IdP to redirect the user to the SP with the SAML Assertion Set to Artifact or HTTP-POST By default set to HTTP-POST OIF/SP also allows the administrator to configure the server to: Set which binding should be used by OIF/SP to redirect the user to the IdP with the SAML 2.0 AuthnRequest message: Redirect or HTTP-POST By default set to Redirect Set which binding should be used by OIF/SP to redirect the user to the IdP during logout with SAML 2.0 Logout messages: Redirect or HTTP-POST By default set to Redirect SAML 1.1 The SAML 1.1 specifications do not define a message for the SP to send to the IdP when a Federation SSO operation is started. As such, there is no capability to configure OIF/SP on how to affect the start of the Federation SSO flow. OpenID 2.0 OpenID 2.0 defines several extensions that can be used by the SP/RP to affect how the Federation SSO operation will take place: OpenID request: mode: String indicating if the IdP/OP can visually interact with the user checkid_immediate does not allow the IdP/OP to interact with the user checkid_setup allows user interaction By default set to checkid_setup PAPE Extension: max_auth_age : Integer indicating in seconds the maximum amount of time since when the user authenticated at the IdP. If MaxAuthnAge is bigger that the time since when the user last authenticated at the IdP, then the user must be re-challenged. OIF/SP will set this attribute to 0 if the administrator configured ForceAuthn to true, otherwise this attribute won't be set Default missing preferred_auth_policies Contains a Federation Authentication Method Element indicating how the user should be challenged at the IdP By default missing Only specified in the OpenID request if the IdP/OP supports PAPE in XRDS, if OpenID discovery is used. UI Extension Popup mode Boolean indicating the popup mode is enabled for the Federation SSO By default missing Language Preference String containing the preferred language, set based on the browser's language preferences. By default missing Icon: Boolean indicating if the icon feature is enabled. In that case, the IdP/OP would look at the SP/RP XRDS to determine how to retrieve the icon By default missing Only specified in the OpenID request if the IdP/OP supports UI Extenstion in XRDS, if OpenID discovery is used. ForceAuthn and IsPassive WLST Command OIF/SP provides the WLST configureIdPAuthnRequest() command to set: ForceAuthn as a boolean: In a SAML 2.0 AuthnRequest, the ForceAuthn field will be set to true or false In an OpenID 2.0 request, if ForceAuthn in the configuration was set to true, then the max_auth_age field of the PAPE request will be set to 0, otherwise, max_auth_age won't be set IsPassive as a boolean: In a SAML 2.0 AuthnRequest, the IsPassive field will be set to true or false In an OpenID 2.0 request, if IsPassive in the configuration was set to true, then the mode field of the OpenID request will be set to checkid_immediate, otherwise set to checkid_setup Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> Let's configure OIF/SP for that IdP Partner, so that the SP will require the IdP to re-challenge the user, even if the user is already authenticated: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureIdPAuthnRequest() command:configureIdPAuthnRequest(partner="AcmeIdP", forceAuthn="true") Exit the WLST environment:exit() After the changes, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ForceAuthn="true" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> To display or delete the ForceAuthn/IsPassive settings, perform the following operatons: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureIdPAuthnRequest() command: To display the ForceAuthn/IsPassive settings on the partnerconfigureIdPAuthnRequest(partner="AcmeIdP", displayOnly="true") To delete the ForceAuthn/IsPassive settings from the partnerconfigureIdPAuthnRequest(partner="AcmeIdP", delete="true") Exit the WLST environment:exit() Requested Fed Authn Method In my earlier "Fed Authentication Method Requests in OIF / SP" article, I discussed how OIF/SP could be configured to request a specific Federation Authentication Method from the IdP when starting a Federation SSO operation, by setting elements in the SSO request message. WLST Command The OIF WLST commands that can be used are: setIdPPartnerProfileRequestAuthnMethod() which will configure the requested Federation Authentication Method in a specific IdP Partner Profile, and accepts the following parameters: partnerProfile: name of the IdP Partner Profile authnMethod: the Federation Authentication Method to request displayOnly: an optional parameter indicating if the method should display the current requested Federation Authentication Method instead of setting it delete: an optional parameter indicating if the method should delete the current requested Federation Authentication Method instead of setting it setIdPPartnerRequestAuthnMethod() which will configure the specified IdP Partner entry with the requested Federation Authentication Method, and accepts the following parameters: partner: name of the IdP Partner authnMethod: the Federation Authentication Method to request displayOnly: an optional parameter indicating if the method should display the current requested Federation Authentication Method instead of setting it delete: an optional parameter indicating if the method should delete the current requested Federation Authentication Method instead of setting it This applies to SAML 2.0 and OpenID 2.0 protocols. See the "Fed Authentication Method Requests in OIF / SP" article for more information. Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> Let's configure OIF/SP for that IdP Partner, so that the SP will request the IdP to use a mechanism mapped to the urn:oasis:names:tc:SAML:2.0:ac:classes:X509 Federation Authentication Method to authenticate the user: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setIdPPartnerRequestAuthnMethod() command:setIdPPartnerRequestAuthnMethod("AcmeIdP", "urn:oasis:names:tc:SAML:2.0:ac:classes:X509") Exit the WLST environment:exit() After the changes, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/>   <samlp:RequestedAuthnContext Comparison="minimum">      <saml:AuthnContextClassRef xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion">         urn:oasis:names:tc:SAML:2.0:ac:classes:X509      </saml:AuthnContextClassRef>   </samlp:RequestedAuthnContext></samlp:AuthnRequest> NameID Format The SAML 2.0 protocol allows for the SP to request from the IdP a specific NameID format to be used when the Assertion is issued by the IdP. Note: SAML 1.1 and OpenID 2.0 do not provide such a mechanism Configuring OIF The administrator can configure OIF/SP to request a NameID format in the SAML 2.0 AuthnRequest via: The OAM Administration Console, in the IdP Partner entry The OIF WLST setIdPPartnerNameIDFormat() command that will modify the IdP Partner configuration OAM Administration Console To configure the requested NameID format via the OAM Administration Console, perform the following steps: Go to the OAM Administration Console: http(s)://oam-admin-host:oam-admin-port/oamconsole Navigate to Identity Federation -> Service Provider Administration Open the IdP Partner you wish to modify In the Authentication Request NameID Format dropdown box with one of the values None The NameID format will be set Default Email Address The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress X.509 Subject The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName Windows Name Qualifier The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:WindowsDomainQualifiedName Kerberos The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos Transient The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:transient Unspecified The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified Custom In this case, a field would appear allowing the administrator to indicate the custom NameID format to use The NameID format will be set to the specified format Persistent The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:persistent I selected Email Address in this example Save WLST Command To configure the requested NameID format via the OIF WLST setIdPPartnerNameIDFormat() command, perform the following steps: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setIdPPartnerNameIDFormat() command:setIdPPartnerNameIDFormat("PARTNER", "FORMAT", customFormat="CUSTOM") Replace PARTNER with the IdP Partner name Replace FORMAT with one of the following: orafed-none The NameID format will be set Default orafed-emailaddress The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress orafed-x509 The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName orafed-windowsnamequalifier The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:WindowsDomainQualifiedName orafed-kerberos The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos orafed-transient The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:transient orafed-unspecified The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified orafed-custom In this case, a field would appear allowing the administrator to indicate the custom NameID format to use The NameID format will be set to the specified format orafed-persistent The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:persistent customFormat will need to be set if the FORMAT is set to orafed-custom An example would be:setIdPPartnerNameIDFormat("AcmeIdP", "orafed-emailaddress") Exit the WLST environment:exit() Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> After the changes performed either via the OAM Administration Console or via the OIF WLST setIdPPartnerNameIDFormat() command where Email Address would be requested as the NameID Format, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ForceAuthn="false" IsPassive="false" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy Format="urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress" AllowCreate="true"/></samlp:AuthnRequest> Protocol Binding The SAML 2.0 specifications define a way for the SP to request which binding should be used by the IdP to redirect the user to the SP with the SAML 2.0 Assertion: the ProtocolBinding attribute indicates the binding the IdP should use. It is set to: Either urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST for HTTP-POST Or urn:oasis:names:tc:SAML:2.0:bindings:Artifact for Artifact The SAML 2.0 specifications also define different ways to redirect the user from the SP to the IdP with the SAML 2.0 AuthnRequest message, as the SP can send the message: Either via HTTP Redirect Or HTTP POST (Other bindings can theoretically be used such as Artifact, but these are not used in practice) Configuring OIF OIF can be configured: Via the OAM Administration Console or the OIF WLST configureSAMLBinding() command to set the Assertion Response binding to be used Via the OIF WLST configureSAMLBinding() command to indicate how the SAML AuthnRequest message should be sent Note: the binding for sending the SAML 2.0 AuthnRequest message will also be used to send the SAML 2.0 LogoutRequest and LogoutResponse messages. OAM Administration Console To configure the SSO Response/Assertion Binding via the OAM Administration Console, perform the following steps: Go to the OAM Administration Console: http(s)://oam-admin-host:oam-admin-port/oamconsole Navigate to Identity Federation -> Service Provider Administration Open the IdP Partner you wish to modify Check the "HTTP POST SSO Response Binding" box to request the IdP to return the SSO Response via HTTP POST, otherwise uncheck it to request artifact Save WLST Command To configure the SSO Response/Assertion Binding as well as the AuthnRequest Binding via the OIF WLST configureSAMLBinding() command, perform the following steps: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureSAMLBinding() command:configureSAMLBinding("PARTNER", "PARTNER_TYPE", binding, ssoResponseBinding="httppost") Replace PARTNER with the Partner name Replace PARTNER_TYPE with the Partner type (idp or sp) Replace binding with the binding to be used to send the AuthnRequest and LogoutRequest/LogoutResponse messages (should be httpredirect in most case; default) httppost for HTTP-POST binding httpredirect for HTTP-Redirect binding Specify optionally ssoResponseBinding to indicate how the SSO Assertion should be sent back httppost for HTTP-POST binding artifactfor for Artifact binding An example would be:configureSAMLBinding("AcmeIdP", "idp", "httpredirect", ssoResponseBinding="httppost") Exit the WLST environment:exit() Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration which requests HTTP-POST from the IdP to send the SSO Assertion. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> In the next article, I will cover the various crypto configuration properties in OIF that are used to affect the Federation SSO exchanges.Cheers,Damien Carru

    Read the article

  • Virtual host is not working in Ubuntu 14 VPS using XAMPP 1.8.3

    - by viral4ever
    I am using XAMPP as server in ubuntu 14.04 VPS of digitalocean. I tried to setup virtual hosts. But it is not working and I am getting 403 error of access denied. I changed files too. My files with changes are /opt/lampp/etc/httpd.conf # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/trunk/> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/trunk/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so 'log/access_log' # with ServerRoot set to '/www' will be interpreted by the # server as '/www/log/access_log', where as '/log/access_log' will be # interpreted as '/log/access_log'. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to specify a local disk on the # Mutex directive, if file-based mutexes are used. If you wish to share the # same ServerRoot for multiple httpd daemons, you will need to change at # least PidFile. # ServerRoot "/opt/lampp" # # Mutex: Allows you to set the mutex mechanism and mutex file directory # for individual mutexes, or change the global defaults # # Uncomment and change the directory if mutexes are file-based and the default # mutex file directory is not on a local disk or is not appropriate for some # other reason. # # Mutex default:logs # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbd_module modules/mod_authn_dbd.so LoadModule authn_socache_module modules/mod_authn_socache.so LoadModule authn_core_module modules/mod_authn_core.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_dbd_module modules/mod_authz_dbd.so LoadModule authz_core_module modules/mod_authz_core.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule access_compat_module modules/mod_access_compat.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_form_module modules/mod_auth_form.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule allowmethods_module modules/mod_allowmethods.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule cache_module modules/mod_cache.so LoadModule cache_disk_module modules/mod_cache_disk.so LoadModule socache_shmcb_module modules/mod_socache_shmcb.so LoadModule socache_dbm_module modules/mod_socache_dbm.so LoadModule socache_memcache_module modules/mod_socache_memcache.so LoadModule dbd_module modules/mod_dbd.so LoadModule bucketeer_module modules/mod_bucketeer.so LoadModule dumpio_module modules/mod_dumpio.so LoadModule echo_module modules/mod_echo.so LoadModule case_filter_module modules/mod_case_filter.so LoadModule case_filter_in_module modules/mod_case_filter_in.so LoadModule buffer_module modules/mod_buffer.so LoadModule ratelimit_module modules/mod_ratelimit.so LoadModule reqtimeout_module modules/mod_reqtimeout.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule request_module modules/mod_request.so LoadModule include_module modules/mod_include.so LoadModule filter_module modules/mod_filter.so LoadModule substitute_module modules/mod_substitute.so LoadModule sed_module modules/mod_sed.so LoadModule charset_lite_module modules/mod_charset_lite.so LoadModule deflate_module modules/mod_deflate.so LoadModule mime_module modules/mod_mime.so LoadModule ldap_module modules/mod_ldap.so LoadModule log_config_module modules/mod_log_config.so LoadModule log_debug_module modules/mod_log_debug.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule expires_module modules/mod_expires.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule unique_id_module modules/mod_unique_id.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule version_module modules/mod_version.so LoadModule remoteip_module modules/mod_remoteip.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so LoadModule proxy_scgi_module modules/mod_proxy_scgi.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_express_module modules/mod_proxy_express.so LoadModule session_module modules/mod_session.so LoadModule session_cookie_module modules/mod_session_cookie.so LoadModule session_dbd_module modules/mod_session_dbd.so LoadModule slotmem_shm_module modules/mod_slotmem_shm.so LoadModule ssl_module modules/mod_ssl.so LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so LoadModule unixd_module modules/mod_unixd.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule suexec_module modules/mod_suexec.so LoadModule cgi_module modules/mod_cgi.so LoadModule cgid_module modules/mod_cgid.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so <IfDefine JUSTTOMAKEAPXSHAPPY> LoadModule php4_module modules/libphp4.so LoadModule php5_module modules/libphp5.so </IfDefine> <IfModule unixd_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User root Group www </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin [email protected] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName www.example.com:@@Port@@ # XAMPP ServerName localhost # # Deny access to the entirety of your server's filesystem. You must # explicitly permit access to web content directories in other # <Directory> blocks below. # <Directory /> AllowOverride none Require all denied </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/opt/lampp/htdocs" <Directory "/opt/lampp/htdocs"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/trunk/mod/core.html#options # for more information. # #Options Indexes FollowSymLinks # XAMPP Options Indexes FollowSymLinks ExecCGI Includes # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # #AllowOverride None # since XAMPP 1.4: AllowOverride All # # Controls who can get stuff from this server. # Require all granted </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> #DirectoryIndex index.html # XAMPP DirectoryIndex index.html index.html.var index.php index.php3 index.php4 </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ".ht*"> Require all denied </Files> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/opt/lampp/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "/opt/lampp/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/opt/lampp/cgi-bin"> AllowOverride None Options None Require all granted </Directory> <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig etc/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # XAMPP, since LAMPP 0.9.8: AddHandler cgi-script .cgi .pl # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # # XAMPP AddType text/html .shtml AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile etc/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or one of the special # values 'default', 'none' or 'unlimited'. # Default setting is to accept 200 Ranges. #MaxRanges unlimited # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall may be used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # Defaults: EnableMMAP On, EnableSendfile Off # EnableMMAP off EnableSendfile off # Supplemental configuration # # The configuration files in the etc/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include etc/extra/httpd-mpm.conf # Multi-language error messages Include etc/extra/httpd-multilang-errordoc.conf # Fancy directory listings Include etc/extra/httpd-autoindex.conf # Language settings #Include etc/extra/httpd-languages.conf # User home directories #Include etc/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include etc/extra/httpd-info.conf # Virtual hosts Include etc/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include etc/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include etc/extra/httpd-dav.conf # Various default settings Include etc/extra/httpd-default.conf # Configure mod_proxy_html to understand HTML4/XHTML1 <IfModule proxy_html_module> Include etc/extra/proxy-html.conf </IfModule> # Secure (SSL/TLS) connections <IfModule ssl_module> # XAMPP <IfDefine SSL> Include etc/extra/httpd-ssl.conf </IfDefine> </IfModule> # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> # XAMPP Include etc/extra/httpd-xampp.conf Include "/opt/lampp/apache2/conf/httpd.conf" I used command shown in this example. I used below lines to change and add group Add group "groupadd www" Add user to group "usermod -aG www root" Change htdocs group "chgrp -R www /opt/lampp/htdocs" Change sitedir group "chgrp -R www /opt/lampp/htdocs/mysite" Change htdocs chmod "chmod 2775 /opt/lampp/htdocs" Change sitedir chmod "chmod 2775 /opt/lampp/htdocs/mysite" And then I changed my vhosts.conf file # Virtual Hosts # # Required modules: mod_log_config # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.4/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/opt/lampp/docs/dummy-host.example.com" ServerName dummy-host.example.com ServerAlias www.dummy-host.example.com ErrorLog "logs/dummy-host.example.com-error_log" CustomLog "logs/dummy-host.example.com-access_log" common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/opt/lampp/docs/dummy-host2.example.com" ServerName dummy-host2.example.com ErrorLog "logs/dummy-host2.example.com-error_log" CustomLog "logs/dummy-host2.example.com-access_log" common </VirtualHost> NameVirtualHost * <VirtualHost *> ServerAdmin [email protected] DocumentRoot "/opt/lampp/htdocs/mysite" ServerName mysite.com ServerAlias mysite.com ErrorLog "/opt/lampp/htdocs/mysite/errorlogs" CustomLog "/opt/lampp/htdocs/mysite/customlog" common <Directory "/opt/lampp/htdocs/mysite"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order Allow,Deny Allow from all Require all granted </Directory> </VirtualHost> but still its not working and I am getting 403 error on my ip and domain however I can access phpmyadmin. If anyone can help me, please help me.

    Read the article

  • Activation Error while testing Exception Handling Application Block

    - by CletusLoomis
    I'm getting the following error while testing my EHAB implementation: {"Activation error occured while trying to get instance of type ExceptionPolicyImpl, key "LogPolicy""} System.Exception Stack Trace: StackTrace " at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key) in c:\Home\Chris\Projects\CommonServiceLocator\main\Microsoft.Practices.ServiceLocation\ServiceLocatorImplBase.cs:line 53 at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance[TService](String key) in c:\Home\Chris\Projects\CommonServiceLocator\main\Microsoft.Practices.ServiceLocation\ServiceLocatorImplBase.cs:line 103 at Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicy.GetExceptionPolicy(Exception exception, String policyName) in e:\Builds\EntLib\Latest\Source\Blocks\ExceptionHandling\Src\ExceptionHandling\ExceptionPolicy.cs:line 131 at Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicy.HandleException(Exception exceptionToHandle, String policyName) in e:\Builds\EntLib\Latest\Source\Blocks\ExceptionHandling\Src\ExceptionHandling\ExceptionPolicy.cs:line 55 at Blackbox.Exception.ExceptionMain.LogException(Exception pException) in C:_Work_Black Box\Blackbox.Exception\ExceptionMain.vb:line 14 at BlackBox.Business.BusinessMain.TestExceptionHandling() in C:_Work_Black Box\BlackBox.Business\BusinessMain.vb:line 16 at Blackbox.Service.Service1.TestExceptionHandling() in C:_Work_Black Box\Blackbox.Service\Service.svc.vb:line 43" String Inner Exception: InnerException {"Resolution of the dependency failed, type = "Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicyImpl", name = "LogPolicy". Exception occurred while: Calling constructor Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FormattedEventLogTraceListener(System.String source, System.String log, System.String machineName, Microsoft.Practices.EnterpriseLibrary.Logging.Formatters.ILogFormatter formatter). Exception is: ArgumentException - Event log names must consist of printable characters and cannot contain \, *, ?, or spaces At the time of the exception, the container was: Resolving Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicyImpl,LogPolicy Resolving parameter "policyEntries" of constructor Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicyImpl(System.String policyName, System.Collections.Generic.IEnumerable1[[Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicyEntry, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]] policyEntries) Resolving Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicyEntry,LogPolicy.All Exceptions Resolving parameter "handlers" of constructor Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicyEntry(System.Type exceptionType, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.PostHandlingAction postHandlingAction, System.Collections.Generic.IEnumerable1[[Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.IExceptionHandler, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]] handlers, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Instrumentation.IExceptionHandlingInstrumentationProvider instrumentationProvider) Resolving Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging.LoggingExceptionHandler,LogPolicy.All Exceptions.Logging Exception Handler (mapped from Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.IExceptionHandler, LogPolicy.All Exceptions.Logging Exception Handler) Resolving parameter "writer" of constructor Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging.LoggingExceptionHandler(System.String logCategory, System.Int32 eventId, System.Diagnostics.TraceEventType severity, System.String title, System.Int32 priority, System.Type formatterType, Microsoft.Practices.EnterpriseLibrary.Logging.LogWriter writer) Resolving Microsoft.Practices.EnterpriseLibrary.Logging.LogWriterImpl,LogWriter.default (mapped from Microsoft.Practices.EnterpriseLibrary.Logging.LogWriter, (none)) Resolving parameter "structureHolder" of constructor Microsoft.Practices.EnterpriseLibrary.Logging.LogWriterImpl(Microsoft.Practices.EnterpriseLibrary.Logging.LogWriterStructureHolder structureHolder, Microsoft.Practices.EnterpriseLibrary.Logging.Instrumentation.ILoggingInstrumentationProvider instrumentationProvider, Microsoft.Practices.EnterpriseLibrary.Logging.ILoggingUpdateCoordinator updateCoordinator) Resolving Microsoft.Practices.EnterpriseLibrary.Logging.LogWriterStructureHolder,LogWriterStructureHolder.default (mapped from Microsoft.Practices.EnterpriseLibrary.Logging.LogWriterStructureHolder, (none)) Resolving parameter "traceSources" of constructor Microsoft.Practices.EnterpriseLibrary.Logging.LogWriterStructureHolder(System.Collections.Generic.IEnumerable1[[Microsoft.Practices.EnterpriseLibrary.Logging.Filters.ILogFilter, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]] filters, System.Collections.Generic.IEnumerable1[[System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]] traceSourceNames, System.Collections.Generic.IEnumerable1[[Microsoft.Practices.EnterpriseLibrary.Logging.LogSource, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]] traceSources, Microsoft.Practices.EnterpriseLibrary.Logging.LogSource allEventsTraceSource, Microsoft.Practices.EnterpriseLibrary.Logging.LogSource notProcessedTraceSource, Microsoft.Practices.EnterpriseLibrary.Logging.LogSource errorsTraceSource, System.String defaultCategory, System.Boolean tracingEnabled, System.Boolean logWarningsWhenNoCategoriesMatch, System.Boolean revertImpersonation) Resolving Microsoft.Practices.EnterpriseLibrary.Logging.LogSource,General Resolving parameter "traceListeners" of constructor Microsoft.Practices.EnterpriseLibrary.Logging.LogSource(System.String name, System.Collections.Generic.IEnumerable1[[System.Diagnostics.TraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]] traceListeners, System.Diagnostics.SourceLevels level, System.Boolean autoFlush, Microsoft.Practices.EnterpriseLibrary.Logging.Instrumentation.ILoggingInstrumentationProvider instrumentationProvider) Resolving Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.ReconfigurableTraceListenerWrapper,Event Log Listener (mapped from System.Diagnostics.TraceListener, Event Log Listener) Resolving parameter "wrappedTraceListener" of constructor Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.ReconfigurableTraceListenerWrapper(System.Diagnostics.TraceListener wrappedTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging.ILoggingUpdateCoordinator coordinator) Resolving Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FormattedEventLogTraceListener,Event Log Listener?implementation (mapped from System.Diagnostics.TraceListener, Event Log Listener?implementation) Calling constructor Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FormattedEventLogTraceListener(System.String source, System.String log, System.String machineName, Microsoft.Practices.EnterpriseLibrary.Logging.Formatters.ILogFormatter formatter) "} System.Exception My web.config is as follows: <?xml version="1.0"?> <configuration> <configSections> <section name="loggingConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.LoggingSettings, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="true" /> <section name="exceptionHandling" type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Configuration.ExceptionHandlingSettings, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="true" /> </configSections> <loggingConfiguration name="" tracingEnabled="true" defaultCategory="General"> <listeners> <add name="Event Log Listener" type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FormattedEventLogTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.FormattedEventLogTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" source="Enterprise Library Logging" formatter="Text Formatter" log="C:\Blackbox.log" machineName="." traceOutputOptions="LogicalOperationStack, DateTime, Timestamp, Callstack" /> </listeners> <formatters> <add type="Microsoft.Practices.EnterpriseLibrary.Logging.Formatters.TextFormatter, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" template="Timestamp: {timestamp}{newline}&#xA;Message: {message}{newline}&#xA;Category: {category}{newline}&#xA;Priority: {priority}{newline}&#xA;EventId: {eventid}{newline}&#xA;Severity: {severity}{newline}&#xA;Title:{title}{newline}&#xA;Machine: {localMachine}{newline}&#xA;App Domain: {localAppDomain}{newline}&#xA;ProcessId: {localProcessId}{newline}&#xA;Process Name: {localProcessName}{newline}&#xA;Thread Name: {threadName}{newline}&#xA;Win32 ThreadId:{win32ThreadId}{newline}&#xA;Extended Properties: {dictionary({key} - {value}{newline})}" name="Text Formatter" /> </formatters> <categorySources> <add switchValue="All" name="General"> <listeners> <add name="Event Log Listener" /> </listeners> </add> </categorySources> <specialSources> <allEvents switchValue="All" name="All Events" /> <notProcessed switchValue="All" name="Unprocessed Category" /> <errors switchValue="All" name="Logging Errors &amp; Warnings"> <listeners> <add name="Event Log Listener" /> </listeners> </errors> </specialSources> </loggingConfiguration> <exceptionHandling> <exceptionPolicies> <add name="LogPolicy"> <exceptionTypes> <add name="All Exceptions" type="System.Exception, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" postHandlingAction="NotifyRethrow"> <exceptionHandlers> <add name="Logging Exception Handler" type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging.LoggingExceptionHandler, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" logCategory="General" eventId="100" severity="Error" title="Enterprise Library Exception Handling" formatterType="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.TextExceptionFormatter, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling" priority="0" /> </exceptionHandlers> </add> </exceptionTypes> </add> <add name="WcfExceptionShielding"> <exceptionTypes> <add name="InvalidOperationException" type="System.InvalidOperationException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" postHandlingAction="ThrowNewException"> <exceptionHandlers> <add type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.WCF.FaultContractExceptionHandler, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.WCF, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" exceptionMessageResourceType="" exceptionMessageResourceName="This is the message" exceptionMessage="This is the exception" faultContractType="Blackbox.Service.WCFFault, Blackbox.Service, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" name="Fault Contract Exception Handler"> <mappings> <add source="{Guid}" name="Id" /> <add source="{Message}" name="MessageText" /> </mappings> </add> </exceptionHandlers> </add> </exceptionTypes> </add> </exceptionPolicies> </exceptionHandling> <connectionStrings> <add name="CompassEntities" connectionString="metadata=~\bin\CompassModel.csdl|~\bin\CompassModel.ssdl|~\bin\CompassModel.msl;provider=Devart.Data.Oracle;provider connection string=&quot;User Id=foo;Password=foo;Server=foo64mo;Home=OraClient11g_home1;Persist Security Info=True&quot;" providerName="System.Data.EntityClient" /> <add name="BlackboxEntities" connectionString="metadata=~\bin\BlackboxModel.csdl|~\bin\BlackboxModel.ssdl|~\bin\BlackboxModel.msl;provider=System.Data.SqlClient;provider connection string=&quot;Data Source=sqldev1\cps;Initial Catalog=FundServ;Integrated Security=True;MultipleActiveResultSets=True&quot;" providerName="System.Data.EntityClient" /> </connectionStrings> <system.web> <compilation debug="true" strict="false" explicit="true" targetFramework="4.0" /> </system.web> <system.serviceModel> <behaviors> <serviceBehaviors> <behavior> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="true"/> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> <system.webServer> <modules runAllManagedModulesForAllRequests="true"/> </system.webServer> </configuration> My code is as follows: Public Shared Function LogException(ByVal pException As System.Exception) As Boolean Return ExceptionPolicy.HandleException(pException, "LogPolicy") End Function Any assistance is appreciated.

    Read the article

  • pylucene: install error

    - by Pradeep
    I am trying to install Pylucene (pylucene-3.3-3-src.tar.gz) on my ubuntu linux 11.10. I have python 2.7.2. I was able to compile JCC (I think) because I didnt see any error when I installed it. When I tried to install Pylucene I get the following error. Can someone help? Thanks. ICU not installed /usr/bin/python -m jcc --shared --jar lucene-java-3.3/lucene/build/lucene-core-3.3.jar --jar lucene-java-3.3/lucene/build/contrib/analyzers/common/lucene-analyzers-3.3.jar --jar lucene-java-3.3/lucene/build/contrib/memory/lucene-memory-3.3.jar --jar lucene-java-3.3/lucene/build/contrib/highlighter/lucene-highlighter-3.3.jar --jar build/jar/extensions.jar --jar lucene-java-3.3/lucene/build/contrib/queries/lucene-queries-3.3.jar --jar lucene-java-3.3/lucene/build/contrib/grouping/lucene-grouping-3.3.jar --package java.lang java.lang.System java.lang.Runtime --package java.util java.util.Arrays java.util.HashMap java.util.HashSet java.text.SimpleDateFormat java.text.DecimalFormat java.text.Collator --package java.util.regex --package java.io java.io.StringReader java.io.InputStreamReader java.io.FileInputStream --exclude org.apache.lucene.queryParser.Token --exclude org.apache.lucene.queryParser.TokenMgrError --exclude org.apache.lucene.queryParser.QueryParserTokenManager --exclude org.apache.lucene.queryParser.ParseException --exclude org.apache.lucene.search.regex.JakartaRegexpCapabilities --exclude org.apache.regexp.RegexpTunnel --exclude org.apache.lucene.analysis.cn.smart.AnalyzerProfile --python lucene --mapping org.apache.lucene.document.Document 'get:(Ljava/lang/String;)Ljava/lang/String;' --mapping java.util.Properties 'getProperty:(Ljava/lang/String;)Ljava/lang/String;' --sequence java.util.AbstractList 'size:()I' 'get:(I)Ljava/lang/Object;' --rename org.apache.lucene.search.highlight.SpanScorer=HighlighterSpanScorer --version 3.3 --module python/collections.py --module python/ICUNormalizer2Filter.py --module python/ICUFoldingFilter.py --module python/ICUTransformFilter.py --files 3 --build /usr/bin/python: No module named jcc make: *** [compile] Error 1 Here is my Makefile configuration which I uncommented PREFIX_PYTHON=/usr ANT=ant PYTHON=$(PREFIX_PYTHON)/bin/python JCC=$(PYTHON) -m jcc --shared NUM_FILES=3

    Read the article

  • Can I set a <probing> privatePath in ~/subdir/web.config without access to the root application .con

    - by Bago
    In ASP.NET, is it possible to set a path from a web.config in a subdir that is not setup as a virtual directory? In other words, can I reference a private assembly in the ~/subdir/bin folder? Take a look at my setup below, and let me know if I'm doing something wrong, please. Let me explain why I'm doing this: my page is setup in ~/subdir. I don't have write access to the root. I only have FTP access to the server (i.e., I am not an IIS admin and I can't login to the machine) I am trying to use FCKeditor in my subdir application Here is my folder structure: / | -subdir | | - Bin | | | *FredCK.FCKeditorV2.dll | | *Default.aspx | | *web.config Here is the <runtime> section of ~/subdir/web.config: <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <probing privatePath="subdir;subdir/bin" /> </dependentAssembly> </assemblyBinding> </runtime> I've tried all sorts of things to get to work. However, upon checking the Fusion logs, my subdir never shows up in the probing paths.

    Read the article

  • Testing movie with Flash IDE fails to load file from localhost

    - by davgothic
    Hi, I'm just wondering if anybody can help me with my simple but frustrating problem. I have created an SWF that loads an XML file from http://localhost/flash/Projects/MEL/Quiz/Quiz/bin/xml/quiz.xml, but I get this error when running the movie using Test Movie in the Flash IDE. Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: http://localhost/flash/Projects/MEL/Quiz/Quiz/bin/xml/quiz.xml at Main/loadConfig()[D:\www\webroot\flash\Projects\MEL\Quiz\Quiz\src\Main.as:126] at Main/configLoadError()[D:\www\webroot\flash\Projects\MEL\Quiz\Quiz\src\Main.as:143] at flash.events::EventDispatcher/dispatchEventFunction() at flash.events::EventDispatcher/dispatchEvent() at flash.net::URLLoader/onComplete() The error I get if I handle the exception is: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032: Stream Error. URL: http://localhost/flash/Projects/MEL/Quiz/Quiz/bin/xml/quiz.xml"] Trouble is running the SWF in a browser locally does work, it only throws these errors in the Flash IDE. I have tried a adding wildcard crossdomain.xml file in my root web directory and setting the SWF publish properties for local playback security to Allow network only, but neither of these have solved my problem. I know Windows 7 handles localhost name resolution differently compared to previous versions of Windows but I have even added 127.0.0.1 localhost to my hosts file to no avail. Can anyone shed any light on this issue?

    Read the article

  • Git subtree not properly using .gitignore when doing a partial clone

    - by D W
    I am a graduate student with many scripts, bibliography data in bibtex, thesis draft in latex, presentations in open office, posters in scribus, and figures and result data. I would like to put everything in one project under version control. Then when I need to work on a portion such as the bibliography data, I would like to check that subdirectory out, modify it as necessary and merge it back.I would like the ability to check out one version to my home computer, and a different one to my work computer and make changes to each independently and eventually merge them back. I would also like to be able to check out a piece of code from this big project and import it with versioning into a separate project. If I may changes I'd like to be able to merge them back to the original project. Based on my understanding git subtree can do this. http://github.com/apenwarr/git-subtree There is an example that is along the lines of what I'm trying to do at: http://psionides.jogger.pl/2010/02/04/sharing-code-between-projects-with-git-subtree/ Say the trunk of my project contained the directories: (bib bin cfg data fig src todo). When I use git subtree split -P bib -b export git checkout export I get a the bib directory, plus all files that should have been ignored or considered binary based on .gitignore such as the src directory and everything in it that ends in a tilde or the ./data directory. dwickrama@DWwork:~/research/trunk$ ls * -r biblography.bib JabRef src: script1.sh~ README~ script2.sh~ script3.sh~ script4.R~ script5.awk~ script5.py~ cfg: cfgFile1.ini~ cfgFile2.ini~ cfgFile3.ini~ bin: bigBinaryPackage1 bigBinaryPackage2 dwickrama@DWwork:~/research/trunk$ My .gitignore file is as follows: *.doc diff=word *.tex diff=tex *.bib diff=bibtex *.py diff=python *.eps binary *.jpg binary *.png binary ./bin/* binary *~ How do I prevent this?

    Read the article

  • gcc compile error when installing Data::Alias package from CPAN (Strawberry Perl)

    - by JoelFan
    I'm trying to install the Data::Alias package from CPAN and I'm getting compile errors from gcc. I'm on Windows Server 2008: Writing Makefile for Data::Alias cp lib/Data/Alias.pm blib\lib\Data\Alias.pm C:\strawberry\perl\bin\perl.exe "-Iinc" C:\strawberry\perl\lib\ExtUtils\xsubpp -typemap C:\strawberry\perl\lib\ExtUtils\typemap Alias.xs > Alias.xsc && C:\str awberry\perl\bin\perl.exe "-Iinc" -MExtUtils::Command -e "mv" -- Alias.xsc Alias .c gcc -c -s -O2 -DWIN32 -DHAVE_DES_FCRYPT -DUSE_SITECUSTOMIZE -DPERL_IMPL ICIT_CONTEXT -DPERL_IMPLICIT_SYS -fno-strict-aliasing -mms-bitfields -DPERL_MSVC RT_READFIX -s -O2 -DVERSION=\"1.07\" -DXS_VERSION=\"1.07\" "-IC:\str awberry\perl\lib\CORE" Alias.c Alias.xs: In function 'da_localize_gvar': Alias.xs:369: error: 'Nullsv' undeclared (first use in this function) Alias.xs:369: error: (Each undeclared identifier is reported only once Alias.xs:369: error: for each function it appears in.) Alias.xs: In function 'da_refgen': Alias.xs:376: error: 'SVt_RV' undeclared (first use in this function) Alias.xs: In function 'DataAlias_pp_rv2sv': Alias.xs:690: warning: 'PL_no_symref' is deprecated (declared at C:\strawberry\p erl\lib\CORE/perl.h:4241) Alias.xs: In function 'DataAlias_pp_rv2gv': Alias.xs:747: warning: 'PL_no_symref' is deprecated (declared at C:\strawberry\p erl\lib\CORE/perl.h:4241) Alias.xs: In function 'DataAlias_pp_return': Alias.xs:1251: error: 'Nullsv' undeclared (first use in this function) Alias.xs: In function 'da_transform': Alias.xs:1436: error: 'Nullop' undeclared (first use in this function) Alias.xs:1450: error: 'OP_SETSTATE' undeclared (first use in this function) Alias.xs: In function 'da_peep2': Alias.xs:1589: error: 'OP_SETSTATE' undeclared (first use in this function) Alias.xs: In function 'da_ck_entersub': Alias.xs:1767: error: 'Nullop' undeclared (first use in this function) dmake.EXE: Error code 129, while making 'Alias.o' XMATH/Data-Alias-1.07.tar.gz C:\strawberry\c\bin\dmake.EXE -- NOT OK Running make test Can't test without successful make Running make install Make had returned bad status, install seems impossible

    Read the article

  • System.IO.FileLoadException

    - by Raj G
    Hi All, I have got this error when using Enterprise Library 3.1 May 2007 version. We are developing a product and have a common lib directory beneath the Subversion Trunk directory <\Trunk\Lib\ into which we put all the third party DLLs. Inside this we have Microsoft\EnterpriseLibrary\v3.1 in which we have copied all the dlls from \Program Files\Microsoft Enterprise Library May2007\bin. Everything was working properly until one of the developers installed the source code on this machine. There were some dlls copied at the end of the source code installation and once that was done, he is not able to run the project anymore. He always gets this error 'Microsoft.Practices.EnterpriseLibrary.Data, Version=3.1.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)' What is the problem here? I thought that when the source code was installed it was just supposed to build everything and copy in the bin directory within the source code parent directory. Also we have copied the Dlls from Microsoft Enterprise Library May 2007\bin directory into our product development directory and references into our project with a copylocal flag set to true. Can anyone help me out here RK

    Read the article

  • Installing mysql on leopard: "Can't connect to local MySQL server through socket"

    - by Neil
    I migrated to a new machine and used migration assistant to copy across my files (which seemed to copy across the DBs) but I had to use macports to install Mysql (whereas last time I compiled from source via Dan Benjamin's guide). For some reason, mysql is intermittently throwing the following error; Can't connect to local MySQL server through socket '/opt/local/var/run/mysql5/mysqld.sock' (2) It does this no matter what I try, which has included setting the socket in /opt/local/etc/mysql5/my.cnf. Previously I've managed to temporarily fix this by restarting the machine, but right now it just doesn't want to know, despite grep mysql telling me I seem to have a pid; 0 46 1 0 0:00.01 ?? 0:00.01 /opt/local/bin/daemondo --label=mysql5 --start-cmd /opt/local/etc/LaunchDaemons/org.macports.mysql5/mysql5.wrapper start ; --stop-cmd /opt/local/etc/LaunchDaemons/org.macports.mysql5/mysql5.wrapper stop ; --restart-cmd /opt/local/etc/LaunchDaemons/org.macports.mysql5/mysql5.wrapper restart ; --pid=none 0 70 1 0 0:00.01 ?? 0:00.01 /bin/sh /opt/local/lib/mysql5/bin/mysqld_safe --datadir=/opt/local/var/db/mysql5 --pid-file=/opt/local/var/db/mysql5/localhost.pid 74 100 70 0 0:09.22 ?? 1:02.68 /opt/local/libexec/mysqld --basedir=/opt/local --datadir=/opt/local/var/db/mysql5 --user=mysql --pid-file=/opt/local/var/db/mysql5/localhost.pid --socket=/tmp/mysql.sock 501 66217 65266 0 0:00.00 ttys001 0:00.00 grep mysql How do I fix this? Are there any steps I can take next? I've been trying for a few weeks now and I've read round all relevant blog posts, so I'm completely out of ideas.

    Read the article

  • Starting an Erlang slave node in escript fails when using custom Erlang in Ubuntu 10.4

    - by Adam Lindberg
    I have the following escript: #!/usr/bin/env escript %%! -name [email protected] main(_) -> NodeName = test, Host = '127.0.0.1', Args = "", {ok, _Node} = slave:start_link(Host, NodeName, Args), io:format("Node started successfully!"). When running it on Ubuntu 10.04 I get this: $ ./start_slave Node started successfully! $ I want to install my own Erlang (latest version, debug compiled files for dialyzer etc) since the stock install of Erlang on Ubuntu lacks some features. I put my Erlang binaries inside ~/Applications/bin. Starting Erlang normally works, and starting slave nodes inside an Erlang shell works as well. However, now my escript doesn't work. After about 60 seconds it returns an error: $ ./start_slave escript: exception error: no match of right hand side value {error,timeout} Even if I change the first line to the escript to use my erlang version, it still does not work: #!/home/user/Applications/bin/escript The slave node is started with a call to erlang:open_port/2 which seems to be using sh which in turn does not read my .bashrc file that sets my custom PATH environment variable. The timeout seems to occur when slave:start_link/3 waits for the slave node to respond, which it never does. How can I roll my own installation of Erlang and start slave nodes inside escripts on Ubuntu 10.4?

    Read the article

  • Error after second spec run with rspec and autospec

    - by Sean Chambers
    After installing rspec/ZenTest and running autospec, it runs my specs the first time as expected. After making a change to one of my specs and upon running the second time I get the following results: /usr/bin/ruby1.8 /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/bin/spec --autospec /home/schambers/Projects/notebook/spec/models/user_spec.rb -O spec/spec.opts /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/formatter/progress_bar_formatter.rb:17:in `flush': Broken pipe (Errno::EPIPE) from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/formatter/progress_bar_formatter.rb:17:in `example_passed' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/reporter.rb:136:in `example_passed' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/reporter.rb:136:in `each' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/reporter.rb:136:in `example_passed' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/reporter.rb:31:in `example_finished' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/example/example_methods.rb:55:in `execute' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/example/example_group_methods.rb:214:in `run_examples' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/example/example_group_methods.rb:212:in `each' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/example/example_group_methods.rb:212:in `run_examples' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/example/example_group_methods.rb:103:in `run' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/example_group_runner.rb:23:in `run' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/example_group_runner.rb:22:in `each' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/example_group_runner.rb:22:in `run' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/options.rb:152:in `run_examples' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/command_line.rb:9:in `run' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/bin/spec:5 Has anyone run into this or know what the heck is going on here? Thanks

    Read the article

  • How do I stop Python install on Mac OS X from putting things in my home directory?

    - by Rob
    Hi, I'm trying to install Python from source on my Mac. (OS X 10.6.2, Python-2.6.5.tar.bz2) I've done this before and it was easy, but for some reason, this time after ./configure, and make, the sudo make install puts things some things in my home directory instead of in /usr/local/... where I expect. The .py files are okay, but not the .so files... RobsMac Python-2.6.5 $ sudo make install [...] /usr/bin/install -c -m 644 ./Lib/anydbm.py /usr/local/lib/python2.6 /usr/bin/install -c -m 644 ./Lib/ast.py /usr/local/lib/python2.6 /usr/bin/install -c -m 644 ./Lib/asynchat.py /usr/local/lib/python2.6 [...] running build_scripts running install_lib creating /Users/rob/Library/Python creating /Users/rob/Library/Python/2.6 creating /Users/rob/Library/Python/2.6/site-packages copying build/lib.macosx-10.4-x86_64-2.6/_AE.so - /Users/rob/Library/ Python/2.6/site-packages copying build/lib.macosx-10.4-x86_64-2.6/_AH.so - /Users/rob/Library/ Python/2.6/site-packages copying build/lib.macosx-10.4-x86_64-2.6/_App.so - /Users/rob/Library/ Python/2.6/site-packages [...] Later, this causes imports that require those .so files to fail. For example... RobsMac Python-2.6.5 $ python Python 2.6.5 (r265:79063, Apr 28 2010, 13:40:18) [GCC 4.2.1 (Apple Inc. build 5646) (dot 1)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import zlib Traceback (most recent call last):     File "", line 1, in ImportError: No module named zlib Any ideas what is wrong? thanks, Rob

    Read the article

  • can't use db:seed in rails

    - by Stacia
    I updated my rails gem to 2.3.5 but I keep getting this error when running db:seed: $ rake db:seed --trace (in c:/Documents and Settings/Owner/workspace/thepatstudio) rake aborted! Don't know how to build task 'db:seed' c:/Ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake.rb:1728:in `[]' c:/Ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake.rb:2050:in `invoke_task' c:/Ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `top_level' c:/Ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `each' c:/Ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `top_level' c:/Ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:in `standard_exception_handling' c:/Ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake.rb:2023:in `top_level' c:/Ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake.rb:2001:in `run' c:/Ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:in `standard_exception_handling' c:/Ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake.rb:1998:in `run' c:/Ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/bin/rake:31 c:/Ruby/bin/rake:19:in `load' c:/Ruby/bin/rake:19 ~/workspace/thepatstudio (master) $ rails --version Rails 2.3.5 My environment.rb has the correct rails version on it and I also ran rake rails:update. What can I do?

    Read the article

  • RMagic Error in rails, with AM Charts

    - by Elliot
    Hi Everyone, I'm using AMCharts and rails. AMCharts uses the Image Magic lib to export an image of the chart. In rails this is done with the gem, RMagic. In a controller this is implemented with the following controller method: def export width = params[:width].to_i height = params[:height].to_i data = {} img = Magick::Image.new(width, height) height.times do |y| row = params["r#{y}"].split(',') row.size.times do |r| pixel = row[r].to_s.split(':') pixel[0] = pixel[0].to_s.rjust(6, '0') if pixel.size == 2 pixel[1].to_i.times do (data[y] ||= []) << pixel[0] end else (data[y] ||= []) << pixel[0] end end width.times do |x| img.pixel_color(x, y, "##{data[y][x]}") end end img.format = "PNG" send_data(img.to_blob , :disposition => 'inline', :type => 'image/png', :filename => "chart.png?#{rand(99999999).to_i}") end When the controller is accessed however, I receive this error in the page: The change you wanted was rejected. Maybe you tried to change something you didn't have access to. And this error in the logs (its running on heroku btw): ActionController::InvalidAuthenticityToken (ActionController::InvalidAuthenticityToken): /home/heroku_rack/lib/static_assets.rb:9:in `call' /home/heroku_rack/lib/last_access.rb:25:in `call' /home/heroku_rack/lib/date_header.rb:14:in `call' thin (1.0.1) lib/thin/connection.rb:80:in `pre_process' thin (1.0.1) lib/thin/connection.rb:78:in `catch' thin (1.0.1) lib/thin/connection.rb:78:in `pre_process' thin (1.0.1) lib/thin/connection.rb:57:in `process' thin (1.0.1) lib/thin/connection.rb:42:in `receive_data' eventmachine (0.12.6) lib/eventmachine.rb:240:in `run_machine' eventmachine (0.12.6) lib/eventmachine.rb:240:in `run' thin (1.0.1) lib/thin/backends/base.rb:57:in `start' thin (1.0.1) lib/thin/server.rb:150:in `start' thin (1.0.1) lib/thin/controllers/controller.rb:80:in `start' thin (1.0.1) lib/thin/runner.rb:173:in `send' thin (1.0.1) lib/thin/runner.rb:173:in `run_command' thin (1.0.1) lib/thin/runner.rb:139:in `run!' thin (1.0.1) bin/thin:6 /usr/local/bin/thin:20:in `load' /usr/local/bin/thin:20 Rendering /disk1/home/slugs/149903_609c236_eb4f/mnt/public/422.html (422 Unprocessable Entity) Anyone have any idea what's going on here?

    Read the article

  • Problem with activesupport ruby 1.91 and rake

    - by Richard
    I have an installation of ruby 1.9.1 ruby 1.9.1p378 (2010-01-10 revision 26273) [i386-mingw32] when I try and run a rake task I am getting an error: rake aborted! no such file to load -- ftools C:/Ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' C:/Ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `block in require' C:/Ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:521:in `new_constants_in' C:/Ruby/lib/ruby/gems/1.9.1/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' C:/Data/Checkouts/mvc2/Cms3/tools/rake/tasks.rb:4:in `<top (required)>' C:/Data/Checkouts/mvc2/stonewarehouse/Rakefile.rb:5:in `require' C:/Data/Checkouts/mvc2/stonewarehouse/Rakefile.rb:5:in `<top (required)>' C:/Ruby/lib/ruby/gems/1.9.1/gems/rake-0.8.7/lib/rake.rb:2383:in `load' C:/Ruby/lib/ruby/gems/1.9.1/gems/rake-0.8.7/lib/rake.rb:2383:in `raw_load_rakefile' C:/Ruby/lib/ruby/gems/1.9.1/gems/rake-0.8.7/lib/rake.rb:2017:in `block in load_rakefile' C:/Ruby/lib/ruby/gems/1.9.1/gems/rake-0.8.7/lib/rake.rb:2068:in `standard_exception_handling' C:/Ruby/lib/ruby/gems/1.9.1/gems/rake-0.8.7/lib/rake.rb:2016:in `load_rakefile' C:/Ruby/lib/ruby/gems/1.9.1/gems/rake-0.8.7/lib/rake.rb:2000:in `block in run' C:/Ruby/lib/ruby/gems/1.9.1/gems/rake-0.8.7/lib/rake.rb:2068:in `standard_exception_handling' C:/Ruby/lib/ruby/gems/1.9.1/gems/rake-0.8.7/lib/rake.rb:1998:in `run' C:/Ruby/lib/ruby/gems/1.9.1/gems/rake-0.8.7/bin/rake:31:in `<top (required)>' C:/Ruby/bin/rake:19:in `load' C:/Ruby/bin/rake:19:in `<main>' any suggestions would be appreciated. thanks.

    Read the article

  • phusion_passenger/plugin.r b:37:in `load': undefined method `dir' for nil:NilClass (NoMethodError)

    - by dohkoos
    gem install passenger # version 3.0.2 run the command 'passenger start' then I got the error: c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passenger/plugin.r b:37:in `load': undefined method `dir' for nil:NilClass (NoMethodError) from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/plugin.rb:34:in `each' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/plugin.rb:34:in `load' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/plugin.rb:72:in `initialize' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/standalone/start_command.rb:52:in `new' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/standalone/start_command.rb:52:in `initialize' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/standalone/main.rb:93:in `new' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/standalone/main.rb:93:in `run_command' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/standalone/main.rb:48:in `each_command' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/standalone/main.rb:43:in `each' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/standalone/main.rb:43:in `each_command' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/standalone/main.rb:91:in `run_command' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/standalone/main.rb:62:in `run!' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/lib/phusion_passe nger/standalone/main.rb:39:in `run!' from c:/Ruby187/lib/ruby/gems/1.8/gems/passenger-3.0.2/bin/passenger:32 from c:/Ruby187/bin/passenger:19:in `load' from c:/Ruby187/bin/passenger:19 Any ideas would be greatly appreciated.

    Read the article

  • Typus not working in Heroku (error 500) what im doing wrong?

    - by Victor P
    Have someone used Typus (admin plugin for rails) in Heroku? http://intraducibles.com/projects/typus/install I follow the instructions and in my local machine (Rails 2.3.5) is working fine, but when I deploy to Heroku it crashes. What Im doing wrong? the log: Logfile created on Mon Mar 29 18:14:06 -0700 2010 Processing TypusController#dashboard (for 190.196.113.93 at 2010-03-29 18:14:07) [GET] Parameters: {"action"=>"dashboard", "controller"=>"typus"} ActiveRecord::StatementInvalid (PGError: ERROR: relation "typus_users" does not exist : SELECT a.attname, format_type(a.atttypid, a.atttypmod), d.adsrc, a.attnotnull FROM pg_attribute a LEFT JOIN pg_attrdef d ON a.attrelid = d.adrelid AND a.attnum = d.adnum WHERE a.attrelid = '"typus_users"'::regclass AND a.attnum > 0 AND NOT a.attisdropped ORDER BY a.attnum ): vendor/plugins/typus/app/controllers/typus_controller.rb:128:in `verify_typus_users_table_schema' /home/heroku_rack/lib/static_assets.rb:9:in `call' /home/heroku_rack/lib/last_access.rb:25:in `call' /home/heroku_rack/lib/date_header.rb:14:in `call' thin (1.0.1) lib/thin/connection.rb:80:in `pre_process' thin (1.0.1) lib/thin/connection.rb:78:in `catch' thin (1.0.1) lib/thin/connection.rb:78:in `pre_process' thin (1.0.1) lib/thin/connection.rb:57:in `process' thin (1.0.1) lib/thin/connection.rb:42:in `receive_data' eventmachine (0.12.6) lib/eventmachine.rb:240:in `run_machine' eventmachine (0.12.6) lib/eventmachine.rb:240:in `run' thin (1.0.1) lib/thin/backends/base.rb:57:in `start' thin (1.0.1) lib/thin/server.rb:150:in `start' thin (1.0.1) lib/thin/controllers/controller.rb:80:in `start' thin (1.0.1) lib/thin/runner.rb:173:in `send' thin (1.0.1) lib/thin/runner.rb:173:in `run_command' thin (1.0.1) lib/thin/runner.rb:139:in `run!' thin (1.0.1) bin/thin:6 /usr/local/bin/thin:20:in `load' /usr/local/bin/thin:20 Rendering /disk1/home/slugs/157361_3469154_60b1/mnt/public/500.html (500 Internal Server Error)

    Read the article

  • ImportError using nose, no ImportError using raw unittest ?

    - by southof40
    I get an ImportError when running my unittests using Nose and I don't when I just run it standalone. All files referred to here may be seen at http://gist.github.com/395541# . If I run the test script, importTest-Test.py, directly I get this output: C:\usr\x\data\src\Python\mmm>python importTest-Test.py In mmdb In BusinessLogic [] . ---------------------------------------------------------------------- Ran 1 test in 0.001s If I allow Nose to run it I get an error : C:\usr\x\data\src\Python\mmm>nosetests.exe E ====================================================================== ERROR: Failure: ImportError (No module named mmdb.DataAccess.AttemptDB) ---------------------------------------------------------------------- Traceback (most recent call last): File "c:\bin\installed\python2.6\lib\site-packages\nose-0.11.3-py2.6.egg\nose\loader.py", line 382, in loadTestsFromName addr.filename, addr.module) File "c:\bin\installed\python2.6\lib\site-packages\nose-0.11.3-py2.6.egg\nose\importer.py", line 39, in importFromPath return self.importFromDir(dir_path, fqname) File "c:\bin\installed\python2.6\lib\site-packages\nose-0.11.3-py2.6.egg\nose\importer.py", line 86, in importFromDir mod = load_module(part_fqname, fh, filename, desc) File "C:\usr\x\data\src\Python\mmm\importtest-Test.py", line 2, in <module> import importtest File "C:\usr\x\data\src\Python\mmm\importtest.py", line 1, in <module> from mmdb.BusinessLogic.AttemptManager import AttemptManager File "C:\usr\x\data\src\Python\mmm\mmdb\BusinessLogic\AttemptManager.py", line 1, in <module> from mmdb.DataAccess.AttemptDB import AttemptDB ImportError: No module named mmdb.DataAccess.AttemptDB ---------------------------------------------------------------------- Ran 1 test in 0.002s FAILED (errors=1) The files involved in the package which nose is having difficulties with are in the following structure - some may be seen here http://gist.github.com/395541# .: mmm\importtest-Test.py mmm\importtest.py mmm\mmdb mmm\__init__.py mmm\mmdb\BusinessLogic mmm\mmdb\BusinessObject mmm\mmdb\DataAccess mmm\mmdb\__init__.py mmm\mmdb\BusinessLogic\AttemptManager.py mmm\mmdb\BusinessLogic\Collections mmm\mmdb\BusinessLogic\__init__.py mmm\mmdb\BusinessLogic\Collections\__init__.py mmm\mmdb\BusinessObject\__init__.py mmm\mmdb\DataAccess\AttemptDB.py mmm\mmdb\DataAccess\__init__.py This is happening on Win32 / Python 2.6 / Nose 0.11.3 . I'd be grateful for any help. thanks.

    Read the article

  • Heroku Rails Internal Server Error

    - by Ryan Max
    Hello. I got a 500 Internal Sever error when I try to deploy my rails app on heroku. It works fine on my local machine, so i'm not sure what's wrong here. Seems to be something with the "sessions" on the home controller. Here is my log: ==> production.log <== # Logfile created on Sun May 09 17:35:59 -0700 2010 Processing HomeController#index (for 76.169.212.8 at 2010-05-09 17:36:00) [GET] ActiveRecord::StatementInvalid (PGError: ERROR: relation "sessions" does not ex ist : SELECT a.attname, format_type(a.atttypid, a.atttypmod), d.adsrc, a .attnotnull FROM pg_attribute a LEFT JOIN pg_attrdef d ON a.attrelid = d.adrelid AND a.attnum = d.adnum WHERE a.attrelid = '"sessions"'::regclass AND a.attnum > 0 AND NOT a.attisdropped ORDER BY a.attnum ): lib/authenticated_system.rb:106:in `login_from_session' lib/authenticated_system.rb:12:in `current_user' lib/authenticated_system.rb:6:in `logged_in?' lib/authenticated_system.rb:35:in `authorized?' lib/authenticated_system.rb:53:in `login_required' /home/heroku_rack/lib/static_assets.rb:9:in `call' /home/heroku_rack/lib/last_access.rb:25:in `call' /home/heroku_rack/lib/date_header.rb:14:in `call' thin (1.2.7) lib/thin/connection.rb:76:in `pre_process' thin (1.2.7) lib/thin/connection.rb:74:in `catch' thin (1.2.7) lib/thin/connection.rb:74:in `pre_process' thin (1.2.7) lib/thin/connection.rb:57:in `process' thin (1.2.7) lib/thin/connection.rb:42:in `receive_data' eventmachine (0.12.10) lib/eventmachine.rb:256:in `run_machine' eventmachine (0.12.10) lib/eventmachine.rb:256:in `run' thin (1.2.7) lib/thin/backends/base.rb:57:in `start' thin (1.2.7) lib/thin/server.rb:156:in `start' thin (1.2.7) lib/thin/controllers/controller.rb:80:in `start' thin (1.2.7) lib/thin/runner.rb:177:in `send' thin (1.2.7) lib/thin/runner.rb:177:in `run_command' thin (1.2.7) lib/thin/runner.rb:143:in `run!' thin (1.2.7) bin/thin:6 /usr/local/bin/thin:20:in `load' /usr/local/bin/thin:20 Rendering /disk1/home/slugs/155328_f2d3c00_845e/mnt/public/500.html (500 Interna l Server Error) And here is my home_controller.rb class HomeController < ApplicationController before_filter :login_required def index @user = current_user @user.profile ||= Profile.new @profile = @user.profile end end Does it have something the way my routes are set up? Or is it my authentication? (I am using restful authentication with Bort)

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >