fragment identifier - Page 81

Running ODI 11gR1 Standalone Agent as a Windows Service

- by fx.nicolas

ODI 11gR1 introduces the capability to use OPMN to start and protect agent processes as services. Setting up the OPMN agent is covered in the following post and extensively in the ODI Installation Guide. Unfortunately, OPMN is not installed along with ODI, and ODI 10g users who are really at ease with the old Java Wrapper are a little bit puzzled by OPMN, and ask: "How can I simply set up the agent as a service?". Well... although the Tanuki Service Wrapper is no longer available for free, and the agentservice.bat script lost, you can switch to another service wrapper for the same result. For example, Yet Another Java Service Wrapper (YAJSW) is a good candidate. To configure a standalone agent with YAJSW: download YAJSW Uncompress the zip to a folder (called %YAJSW% in this example) Configure, start and test your standalone agent. Make sure that this agent is loaded with all the required libraries and drivers, as the service will not load dynamically the drivers added subsequently in the /drivers directory. Retrieve the PID of the agent process: Open Task Manager. Select View Select Columns Select the PID (Process Identifier) column, then click OK In the list of processes, find the java.exe process corresponding to your agent, and note its PID. Open a command line prompt in %YAJSW%/bat and run: genConfig.bat <your_pid> This command generates a wrapper configuration file for the agent. This file is called %YAJSW%/conf/wrapper.conf. Stop your agent. Edit the wrapper.conf file and modify the configuration of your service. For example, modify the display name and description of the service as shown in the example below. Important: Make sure to escape the commas in the ODI encoded passwords with a backslash! In the example below, the ODI_SUPERVISOR_ENCODED_PASS contained a comma character which had to be prefixed with a backslash. # Title to use when running as a console wrapper.console.title=\"AGENT\" #******************************************************************** # Wrapper Windows Service and Posix Daemon Properties #******************************************************************** # Name of the service wrapper.ntservice.name=AGENT_113 # Display name of the service wrapper.ntservice.displayname=ODI Agent # Description of the service wrapper.ntservice.description=Oracle Data Integrator Agent 11gR3 (11.1.1.3.0) ... # Escape the comma in the password with a backslash. wrapper.app.parameter.7 = -ODI_SUPERVISOR_ENCODED_PASS=fJya.vR5kvNcu9TtV\,jVZEt Execute your wrapped agent as console by calling in the command line prompt: runConsole.bat Check that your agent is running, and test it again.This command starts the agent with the configuration but does not install it yet as a service. To Install the agent as service call installService.bat From that point, you can view, start and stop the agent via the windows services. Et voilà ! Two final notes: - To modify the agent configuration, you must uninstall/reinstall the service. For this purpose, run the uninstallService.bat to uninstall it and play again the process above. - To be able to uninstall the agent service, you should keep a backup of the wrapper.conf file. This is particularly important when starting several services with the wrapper.

Read the article

To sample or not to sample...

- by [email protected]

Ideally, we would know the exact answer to every question. How many people support presidential candidate A vs. B? How many people suffer from H1N1 in a given state? Does this batch of manufactured widgets have any defective parts? Knowing exact answers is expensive in terms of time and money and, in most cases, is impractical if not impossible. Consider asking every person in a region for their candidate preference, testing every person with flu symptoms for H1N1 (assuming every person reported when they had flu symptoms), or destructively testing widgets to determine if they are "good" (leaving no product to sell). Knowing exact answers, fortunately, isn't necessary or even useful in many situations. Understanding the direction of a trend or statistically significant results may be sufficient to answer the underlying question: who is likely to win the election, have we likely reached a critical threshold for flu, or is this batch of widgets good enough to ship? Statistics help us to answer these questions with a certain degree of confidence. This focuses on how we collect data. In data mining, we focus on the use of data, that is data that has already been collected. In some cases, we may have all the data (all purchases made by all customers), in others the data may have been collected using sampling (voters, their demographics and candidate choice). Building data mining models on all of your data can be expensive in terms of time and hardware resources. Consider a company with 40 million customers. Do we need to mine all 40 million customers to get useful data mining models? The quality of models built on all data may be no better than models built on a relatively small sample. Determining how much is a reasonable amount of data involves experimentation. When starting the model building process on large datasets, it is often more efficient to begin with a small sample, perhaps 1000 - 10,000 cases (records) depending on the algorithm, source data, and hardware. This allows you to see quickly what issues might arise with choice of algorithm, algorithm settings, data quality, and need for further data preparation. Instead of waiting for a model on a large dataset to build only to find that the results don't meet expectations, once you are satisfied with the results on the initial sample, you can take a larger sample to see if model quality improves, and to get a sense of how the algorithm scales to the particular dataset. If model accuracy or quality continues to improve, consider increasing the sample size. Sampling in data mining is also used to produce a held-aside or test dataset for assessing classification and regression model accuracy. Here, we reserve some of the build data (data that includes known target values) to be used for an honest estimate of model error using data the model has not seen before. This sampling transformation is often called a split because the build data is split into two randomly selected sets, often with 60% of the records being used for model building and 40% for testing. Sampling must be performed with care, as it can adversely affect model quality and usability. Even a truly random sample doesn't guarantee that all values are represented in a given attribute. This is particularly troublesome when the attribute with omitted values is the target. A predictive model that has not seen any examples for a particular target value can never predict that target value! For other attributes, values may consist of a single value (a constant attribute) or all unique values (an identifier attribute), each of which may be excluded during mining. Values from categorical predictor attributes that didn't appear in the training data are not used when testing or scoring datasets. In subsequent posts, we'll talk about three sampling techniques using Oracle Database: simple random sampling without replacement, stratified sampling, and simple random sampling with replacement.

Read the article

How to detect and configure an output with xrandr?

- by ysap

I have a DELL U2410 monitor connected to a Compaq 100B desktop equipped with an integrated AMD/ATI graphics card (AMD E-350). The installed O/S is Ubuntu 10.04 LTS. The computer is connected to the monitor via the DVI connection. The problem is that I cannot set the desktop resolution to the native 1920x1200. The maximum allowed resolution is 1600x1200. Doing some research I found about the xrandr utility. Unfortunately, when trying to use it I cannot configure it to the required resolution. First, it does not report the output name (which supposed to be DVI-0), saying default instead. Without it I cannot use the --fb option. The EDID utility seems to identify the monitor well. Here's the output from get-edid: # EDID version 1 revision 3 Section "Monitor" # Block type: 2:0 3:ff # Block type: 2:0 3:fc Identifier "DELL U2410" VendorName "DEL" ModelName "DELL U2410" # Block type: 2:0 3:ff # Block type: 2:0 3:fc # Block type: 2:0 3:fd HorizSync 30-81 VertRefresh 56-76 # Max dot clock (video bandwidth) 170 MHz # DPMS capabilities: Active off:yes Suspend:yes Standby:yes Mode "1920x1200" # vfreq 59.950Hz, hfreq 74.038kHz DotClock 154.000000 HTimings 1920 1968 2000 2080 VTimings 1200 1203 1209 1235 Flags "-HSync" "+VSync" EndMode # Block type: 2:0 3:ff # Block type: 2:0 3:fc # Block type: 2:0 3:fd EndSection but the xrandr -q command returns: Screen 0: minimum 640 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 0.0* 1280x1024 0.0 1152x864 0.0 1024x768 0.0 800x600 0.0 640x480 0.0 720x400 0.0 When I try to set the resolution, I get: $ xrandr --fb 1920x1200 xrandr: screen cannot be larger than 1600x1200 (desired size 1920x1200) $ xrandr --output DVI-0 --auto warning: output DVI-0 not found; ignoring How can I set the screen resolution to 1920x1200? Why doesn't xrandr identify the DVI-0 output? Note that the same computer running Ubuntu version higher than 10.04 detects the correct resolution with no problems. On this machine I cannot upgrade due to some legacy hardware compatibility problems. Also, I don't see any optional screen drivers available in the Hardware Drivers dialog. ---- UPDATE: following the answer to this question, I got some advance. Now the required mode is listed in the xrandr -q list, but I can't switch to that mode. Using the Monitors applet (which now shows the new mode), I get the response that: The selected configuration for displays could not be applied. Could not set the configuration to CRTC 262. From the command line it looks like this: $ cvt 1920 1200 60 # 1920x1200 59.88 Hz (CVT 2.30MA) hsync: 74.56 kHz; pclk: 193.25 MHz Modeline "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync $ xrandr --newmode "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync $ xrandr -q Screen 0: minimum 640 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 0.0* 1280x1024 0.0 1152x864 0.0 1024x768 0.0 800x600 0.0 640x480 0.0 720x400 0.0 1920x1200_60.00 (0x120) 193.0MHz h: width 1920 start 2056 end 2256 total 2592 skew 0 clock 74.5KHz v: height 1200 start 1203 end 1209 total 1245 clock 59.8Hz $ xrandr --addmode default 1920x1200_60.00 $ xrandr -q Screen 0: minimum 640 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 0.0* 1280x1024 0.0 1152x864 0.0 1024x768 0.0 800x600 0.0 640x480 0.0 720x400 0.0 1920x1200_60.00 59.8 $ xrandr --output default --mode 1920x1200_60.00 xrandr: Configure crtc 0 failed Another piece of info (if it helps anyone): $ sudo lshw -c video *-display UNCLAIMED description: VGA compatible controller product: ATI Technologies Inc vendor: ATI Technologies Inc physical id: 1 bus info: pci@0000:00:01.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: latency=0 resources: memory:c0000000-cfffffff(prefetchable) ioport:f000(size=256) memory:feb00000-feb3ffff

Read the article

Combining Scrum, TFS2010 and Email to keep everyone in the loop

- by Martin Hinshelwood

Often you will receive rich information from your Product Owner (Customer) about tasks. That information can be in the form of Word documents, HTML Emails and Pictures, but you generally receive them in the context of an Email. You need to keep these so your Team can refer to it later, and so you can send a “done” when the task has been completed. This preserves the “history” of the task and allows you to keep relevant partied included in any future conversation. At SSW we keep the original email so that we can reply Done and delete the email. But keeping it in your email does not help other members of the team if they complete the task and need to send the “done”. Worse yet, the description field in Team Foundation Server 2010 (TFS 2010) does not support HTML and images, nor does the default task template support an “interested parties” or CC field. You can attach this content manually, but it can be time consuming. Figure: Description only supports plain text, and History supports HTML with no images What should we do? At SSW we always follow the rules, and it just so happened that we have rules to both achieve this, and to make it easier. You should follow the existing Rules to Better Project Management and attach the email to your task so you can refer to and reply to it later when you close the task: Do you know what Outlook add-ins you need? Describe the work item request in an email Use Outlook Add-in to move the email to a TFS Work Item When replying to an email with “done” you should follow: Do you update Team Companion template, so the email "subject" doesn't change? Do you update Team Companion template, so you can generate a proper "done" mail? Following these simple rules will help your Product Owner understand you better, and allow your team to more effectively collaborate with each other. An added bonus is that as we are keeping the email history in sync with TFS. When you “reply all” to the email all of the interested partied to the Task are also included. This notified those that may have been blocked by your task to keep up to date with its status. This has been published as Do you know to ensure that relevant emails are attached to tasks in our Rules to Better Scrum using TFS. What could we do better? I would like to see this process automated so that we capture the information correctly in the task without the need to use email. This would require a change to the process template in Team Foundation Server to add an “Interested Parties” field. Each reply to the email would need to be automatically processed into a Work Item. This could be done by adding a task identifier as the first item in the “Relates to” email header, and copying in an email address that you watch. This would then parse out the relevant information and add the new message to the history, update the “Interested parties” field and attach the Images. Upon reflection, it may even be possible, but more difficult to do this using ONLY the History field and including some of the header information in there to the build a done email with history. This would not currently deal with email “forks” well, but I think it would be adequate for our needs. It would be nice if we could find time to implement this, but currently it is but a pipe dream. Maybe Microsoft could implement something in the next version of Team Foundation Server, and in the mean time we have a process that works well. Technorati Tags: Scrum,SSW Rules,TFS 2010,TFS 2008

Read the article

Removing old kernel entries in Grub

- by To Do

I regularly delete old kernels leaving only the latest two entries using Synaptic. I'm using Precise. However in my Grub "previous Linux version" menu there are quite a few entries labelled 2.6.8. I cannot find these linux-images in Synaptic. dpkg -l | grep linux-image Gives: rc linux-image-3.0.0-17-generic 3.0.0-17.30 Linux kernel image for version 3.0.0 on x86/x86_64 ii linux-image-3.2.0-27-generic 3.2.0-27.43 Linux kernel image for version 3.2.0 on 32 bit x86 SMP ii linux-image-3.2.0-29-generic 3.2.0-29.46 Linux kernel image for version 3.2.0 on 32 bit x86 SMP ii linux-image-3.4.0-030400-generic 3.4.0-030400.201205210521 Linux kernel image for version 3.4.0 on 32 bit x86 SMP ii linux-image-generic 3.2.0.29.31 Generic Linux kernel image Sudo update-grub gives: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.4.0-030400-generic Found initrd image: /boot/initrd.img-3.4.0-030400-generic Found linux image: /boot/vmlinuz-3.2.0-29-generic Found initrd image: /boot/initrd.img-3.2.0-29-generic Found linux image: /boot/vmlinuz-3.2.0-27-generic Found initrd image: /boot/initrd.img-3.2.0-27-generic Found linux image: /boot/vmlinuz-2.6.38-11-generic Found initrd image: /boot/initrd.img-2.6.38-11-generic Found linux image: /boot/vmlinuz-2.6.38-10-generic Found initrd image: /boot/initrd.img-2.6.38-10-generic Found linux image: /boot/vmlinuz-2.6.38-8-generic Found initrd image: /boot/initrd.img-2.6.38-8-generic Found memtest86+ image: /boot/memtest86+.bin Found Windows Vista (loader) on /dev/sda1 sudo apt-get remove linux-image-2.6.8-8-generic gives: E: Unable to locate package linux-image-2.6.8-8-generic E: Couldn't find any package by regex 'linux-image-2.6.8-8-generic' My boot folder contains the following: abi-2.6.38-10-generic initrd.img-3.4.0-030400-generic abi-2.6.38-11-generic memtest86+.bin abi-2.6.38-8-generic memtest86+_multiboot.bin abi-3.2.0-27-generic System.map-2.6.38-10-generic abi-3.2.0-29-generic System.map-2.6.38-11-generic abi-3.4.0-030400-generic System.map-2.6.38-8-generic config-2.6.38-10-generic System.map-3.2.0-27-generic config-2.6.38-11-generic System.map-3.2.0-29-generic config-2.6.38-8-generic System.map-3.4.0-030400-generic config-3.2.0-27-generic vmcoreinfo-2.6.38-10-generic config-3.2.0-29-generic vmcoreinfo-2.6.38-11-generic config-3.4.0-030400-generic vmcoreinfo-2.6.38-8-generic extlinux vmlinuz-2.6.38-10-generic grub vmlinuz-2.6.38-11-generic initrd.img-2.6.38-10-generic vmlinuz-2.6.38-8-generic initrd.img-2.6.38-11-generic vmlinuz-3.2.0-27-generic initrd.img-2.6.38-8-generic vmlinuz-3.2.0-29-generic initrd.img-3.2.0-27-generic vmlinuz-3.4.0-030400-generic initrd.img-3.2.0-29-generic and ls -l /etc/grub.d yields: total 56 -rwxr-xr-x 1 root root 6715 Apr 17 20:16 00_header -rwxr-xr-x 1 root root 5522 Oct 1 2011 05_debian_theme -rwxr-xr-x 1 root root 7407 May 17 09:22 10_linux -rwxr-xr-x 1 root root 6335 Apr 17 20:16 20_linux_xen -rwxr-xr-x 1 root root 1588 May 3 2011 20_memtest86+ -rwxr-xr-x 1 root root 7603 Apr 17 20:16 30_os-prober -rwxr-xr-x 1 root root 214 Oct 1 2011 40_custom -rwxr-xr-x 1 root root 95 Oct 1 2011 41_custom -rw-r--r-- 1 root root 483 Oct 1 2011 README gdisk -l /dev/sda yields: Partition table scan: MBR: MBR only BSD: not present APM: not present GPT: not present *************************************************************** Found invalid GPT and valid MBR; converting MBR to GPT format. *************************************************************** Disk /dev/sda: 312581808 sectors, 149.1 GiB Logical sector size: 512 bytes Disk identifier (GUID): F832A498-05E1-4615-B5B1-757ACB4A757A Partition table holds up to 128 entries First usable sector is 34, last usable sector is 312581774 Partitions will be aligned on 2048-sector boundaries Total free space is 4183661 sectors (2.0 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 61442047 29.3 GiB 0700 Microsoft basic data 3 163842048 169986047 2.9 GiB 8200 Linux swap 4 169986048 312578047 68.0 GiB 0700 Microsoft basic data 5 61444096 159666175 46.8 GiB 8300 Linux filesystem Please help with removing the old and inexistent kernels from Grub.

Read the article

Is your Credit Card Number valid?

- by Rekha

The credit card numbers may look like some random unique 16 digits number but those digits inform more than what we think it could be. The first digit of the card is the Major Industry Identifier: 1 and 2 - Airlines 3 – Travel and Entertainment 4 and 5 - Banking and Financial 6 – Merchandizing and Banking 7 – Petroleum 8 – Telecommunications 9 – National assignment The first 6 digits represent the Issuer Identification Number: Visa – 4xxxxx Master Card – 51xxxx & 55xxxx The 7th and following digits, excluding the last digit, are the person’s account number which leads to trillion possible combinations if the maximum of 12 digits is used. Many cards only use 9 digits. The final digit is the checksum or check digit. It is used to validate the card number using Luhn algorithm. How To Validate Credit Card Number? Take any credit card number, for example 5588 3201 2345 6789. Step 1: Double every other digit from the right: 5*2 8*2 3*2 0*2 2*2 4*2 6*2 8*2 ————————————————————————- 10 16 6 0 4 8 12 16 Step 2: Add these new digits to undoubled digits. All double digit numbers are added as a sum of their digits, so 16 becomes 1+6 = 7: Undoubled digits: 5 8 2 1 3 5 7 9 Doubled Digits: 10 16 6 0 4 8 12 16 Sum: 5+1+0+8+1+6+2+6+1+0+3+4+5+8+7+1+2+9+1+6 = 76 If the final sum is divisible by 10, then the Credit Card number is valid, if not, the number is invalid or fake!!! Hence the example is a fake number? via mint cc and image credit This article titled,Is your Credit Card Number valid?, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

Read the article

How do I fix a corrupted harddrive after failed upgrade?

- by Nil

The problem originated when I was trying to fix this problem. Things went horribly, horribly wrong and I ended up with a new problem altogether. The last thing I did was run sudo apt-get install and that caused my system to freeze. I restarted my computer and it would not boot from the harddrive. I ran a copy of Ubuntu 12.10 from a flashdrive that I had and ran gparted to see if my partitions were all there. It returned this message: Invalid partition table on /dev/sda -- wrong signature 5208. The drive appeared as a 2TiB unallocated drive with an error. The drive had 4 partitions before (plus random unallocated space). There was a fat32 partition, an ext4 partition which contained ubuntu 13.04/13.10 (I don't even know which one at this point), an extended partition which contained a swap partition for my ubuntu partition (I was meaning to move that ubuntu partition into the extended partition, never got around to it), and another partition (I don't remember how I formatted it). I should also mention this is a 1TB harddrive. So in short, I have a corrupted partition table on my primary harddrive from which I boot from, how can I fix this? I tried mounting the drive with sudo mount /dev/sda1 /media/ubuntu then I changed my directory to said folder and tried to list files and this monstrosity happened: $ ls ls: cannot access ??w?j^?.: Input/output error ls: cannot access ??(? ?x?.|: Input/output error ls: cannot access 6W_@?)?._??: Input/output error ls: cannot access HB0v???.A}?: Input/output error ls: cannot access ???.?X: Input/output error ls: cannot access t)?.+?l: Input/output error ls: cannot access ?h@ ?.@ : Input/output error ls: cannot access >? @??.???: Input/output error ls: cannot access m???.??: Input/output error ls: cannot access @ if??a?: Input/output error ls: cannot access ?M!vN$?.??n: Input/output error ls: cannot access ?o? ??.Bm`: Input/output error ls: cannot access ?:I??? M. : Input/output error ls: cannot access W??.??: Input/output error ls: cannot access ?: Input/output error ls: cannot access ?W?s??: Input/output error ls: cannot access ?v?k?.???: Input/output error ls: cannot access 5?$<N??: Input/output error .x????.??i: Input/output error ls: cannot access je????.j?1: Input/output error XjD?.???: Input/output error ls: cannot access W??n???.?: Input/output error ls: cannot access ?^x.$"?: Input/output error ls: cannot access !??*!??j.??: Input/output error ls: cannot access '-??k?^?.???: Input/output error ls: cannot access b?w?w?b.\??: Input/output error ls: cannot access o????"z.??B: Input/output error ls: cannot access ??b?h.?3-: Input/output error ls: cannot access ??.$7: Input/output error ls: cannot access )??K.bk: Input/output error ls: cannot access s??z?.?(?: Input/output error ls: cannot access ?F@?0?.@?: Input/output error .?D: Input/output error .??: Input/output error ls: cannot access?????. @: Input/output error ls: cannot access ?/?? ?.??: No such file or directory ls: cannot access rk?p4q(?.?k: Input/output error This looks promising. This is the output of fdisk -l $ sudo fdisk -l /dev/sda Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: invalid flag 0x5208 of partition table 5 will be corrected by w(rite) Disk /dev/sda: 2199.0 GB, 2199023132672 bytes 255 heads, 63 sectors/track, 267349 cylinders, total 4294967056 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x44fdfe06 Device Boot Start End Blocks Id System /dev/sda1 113305600 894715903 390705152 c W95 FAT32 (LBA) /dev/sda2 894715904 1489307647 297295872 83 Linux /dev/sda3 1489309694 1497307135 3998721 5 Extended /dev/sda4 1497309184 1953523711 228107264 7 HPFS/NTFS/exFAT /dev/sda5 ? 3013257822 3688738171 337740175 aa Unknown

Read the article

Big Data – Operational Databases Supporting Big Data – Key-Value Pair Databases and Document Databases – Day 13 of 21

- by Pinal Dave

In yesterday’s blog post we learned the importance of the Relational Database and NoSQL database in the Big Data Story. In this article we will understand the role of Key-Value Pair Databases and Document Databases Supporting Big Data Story. Now we will see a few of the examples of the operational databases. Relational Databases (Yesterday’s post) NoSQL Databases (Yesterday’s post) Key-Value Pair Databases (This post) Document Databases (This post) Columnar Databases (Tomorrow’s post) Graph Databases (Tomorrow’s post) Spatial Databases (Tomorrow’s post) Key Value Pair Databases Key Value Pair Databases are also known as KVP databases. A key is a field name and attribute, an identifier. The content of that field is its value, the data that is being identified and stored. They have a very simple implementation of NoSQL database concepts. They do not have schema hence they are very flexible as well as scalable. The disadvantages of Key Value Pair (KVP) database are that they do not follow ACID (Atomicity, Consistency, Isolation, Durability) properties. Additionally, it will require data architects to plan for data placement, replication as well as high availability. In KVP databases the data is stored as strings. Here is a simple example of how Key Value Database will look like: Key Value Name Pinal Dave Color Blue Twitter @pinaldave Name Nupur Dave Movie The Hero As the number of users grow in Key Value Pair databases it starts getting difficult to manage the entire database. As there is no specific schema or rules associated with the database, there are chances that database grows exponentially as well. It is very crucial to select the right Key Value Pair Database which offers an additional set of tools to manage the data and provides finer control over various business aspects of the same. Riak Rick is one of the most popular Key Value Database. It is known for its scalability and performance in high volume and velocity database. Additionally, it implements a mechanism for collection key and values which further helps to build manageable system. We will further discuss Riak in future blog posts. Key Value Databases are a good choice for social media, communities, caching layers for connecting other databases. In simpler words, whenever we required flexibility of the data storage keeping scalability in mind – KVP databases are good options to consider. Document Database There are two different kinds of document databases. 1) Full document Content (web pages, word docs etc) and 2) Storing Document Components for storage. The second types of the document database we are talking about over here. They use Javascript Object Notation (JSON) and Binary JSON for the structure of the documents. JSON is very easy to understand language and it is very easy to write for applications. There are two major structures of JSON used for Document Database – 1) Name Value Pairs and 2) Ordered List. MongoDB and CouchDB are two of the most popular Open Source NonRelational Document Database. MongoDB MongoDB databases are called collections. Each collection is build of documents and each document is composed of fields. MongoDB collections can be indexed for optimal performance. MongoDB ecosystem is highly available, supports query services as well as MapReduce. It is often used in high volume content management system. CouchDB CouchDB databases are composed of documents which consists fields and attachments (known as description). It supports ACID properties. The main attraction points of CouchDB are that it will continue to operate even though network connectivity is sketchy. Due to this nature CouchDB prefers local data storage. Document Database is a good choice of the database when users have to generate dynamic reports from elements which are changing very frequently. A good example of document usages is in real time analytics in social networking or content management system. Tomorrow In tomorrow’s blog post we will discuss about various other Operational Databases supporting Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

Implementing features in an Entity System

- by Bane

After asking two questions on Entity Systems (1, 2), and reading some articles on them, I think that I understand them much better than before. But, I still have some uncertainties, and mainly they are about building a Particle Emitter, an Input system, and a Camera. I obviously still have some problems understanding Entity Systems, and they might apply to a whole other range of objects, but I chose these three because they are very different concepts and should cover a pretty big ground, and help me understand Entity Systems and how to handle problems like these myself, as they come along. I am building an engine in Javascript, and I've implemented most of the core features, which include: input handling, flexible animation system, particle emitter, math classes and functions, scene handling, a camera and a render, and a whole bunch of other things that engines usually support. Then, I read Byte56's answer that got me interested into making the engine into an Entity System one. It would still remain an HTML5 game engine with the basic Scene philosophy, but it should support dynamic creation of entities from components. These are some of the definitions from the previous questions, updated: An Entity is an identifier. It doesn't have any data, it's not an object, it's a simple id that represents an index in the Scene's list of all entities (which I actually plan to implement as a component matrix). A Component is a data holder, but with methods that can operate on that data. The best example is a Vector2D, or a "Position" component. It has data: x and y, but also some methods that make operating on the data a bit easier: add(), normalize(), and so on. A System is something that can operate on a set of entities that meet the certain requirements, usually they (the entities) need to have a specified (by the system itself) set of components to be operated upon. The system is the "logic" part, the "algorithm" part, all the functionality supplied by components is purely for easier data management. The problem that I have now is fitting my old engine concept into this new programming paradigm. Lets start with the simplest one, a Camera. The camera has a position property (Vector2D), a rotation property and some methods for centering it around a point. Each frame, it is fed to a renderer, along with a scene, and all the objects are translated according to it's position. Then the scene is rendered. How could I represent this kind of an object in an Entity System? Would the camera be an entity or simply a component? A combination (see my answer)? Another issues that is bothering me is implementing a Particle Emitter. For what exactly I mean by that, you can check out my video of it: http://youtu.be/BObargIMQsE. The problem I have with this is, again, what should be what. I'm pretty sure that particles themselves shouldn't be entities, as I want to support 10k+ of them, and creating that much entities would be a heavy blow on my performance, I believe. Or maybe not? Depends on the implementation, but anyone with experience: please, do answer. The last bit I wan't to talk about, which is also bugging me the most, is how input should be handled. In my current version of the engine, there is a class called Input. It's a handler that subscribes to browser's events, such as keypresses, and mouse position changes, and also it maintains an internal state. Then, the player class has a react() method, which accepts an input object as an argument. The advantage of this is that the input object could be serialized into JSON and then shared over the network, allowing for smooth multiplayer simulations. But how does this translate into an Entity System?

Read the article

How to check if a cdrom is in the tray remotely (via ssh)?

- by adempewolff

I have a server running Ubuntu 10.04 (it's on the other side of the world and I haven't built up the wherewithal to upgrade it remotely yet) and I have been told that there is a CD in one of it's two CD drives. I want to rip an image of the cd and then download it to my local computer (I don't need help with either of these steps). However, I cannot seem to confirm whether or not there actually is a CD in the drive as I was told. It did not automatically mount anywhere (which I'm thinking might just be a result of it being a headless server not running X, nautilus, or any of the other nice user friendly things). There are two CD drives connected via SCSI: austin@austinvpn:/proc/scsi$ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD400EB-75CP Rev: 06.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: Lite-On Model: LTN486S 48x Max Rev: YDS6 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: SAMSUNG Model: CD-R/RW SW-248F Rev: R602 Type: CD-ROM ANSI SCSI revision: 05 However when I try mounting either of these devices (and every other device that could possibly be the cd-drive), it says no medium found: austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/scd1 /cdrom mount: no medium found on /dev/sr1 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/scd0 /cdrom mount: no medium found on /dev/sr0 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrom /cdrom mount: no medium found on /dev/sr1 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrom1 /cdrom mount: no medium found on /dev/sr0 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrw /cdrom mount: no medium found on /dev/sr1 Here are the contents of my /dev folder: austin@austinvpn:/proc/scsi$ ls /dev agpgart loop6 ram6 tty10 tty38 tty8 austinvpn loop7 ram7 tty11 tty39 tty9 block lp0 ram8 tty12 tty4 ttyS0 bsg mapper ram9 tty13 tty40 ttyS1 btrfs-control mcelog random tty14 tty41 ttyS2 bus mem rfkill tty15 tty42 ttyS3 cdrom net root tty16 tty43 urandom cdrom1 network_latency rtc tty17 tty44 usbmon0 cdrw network_throughput rtc0 tty18 tty45 usbmon1 char null scd0 tty19 tty46 usbmon2 console oldmem scd1 tty2 tty47 usbmon3 core parport0 sda tty20 tty48 usbmon4 cpu_dma_latency pktcdvd sda1 tty21 tty49 vcs disk port sda2 tty22 tty5 vcs1 dri ppp sda5 tty23 tty50 vcs2 ecryptfs psaux sg0 tty24 tty51 vcs3 fb0 ptmx sg1 tty25 tty52 vcs4 fd pts sg2 tty26 tty53 vcs5 full ram0 shm tty27 tty54 vcs6 fuse ram1 snapshot tty28 tty55 vcs7 hpet ram10 snd tty29 tty56 vcsa input ram11 sndstat tty3 tty57 vcsa1 kmsg ram12 sr0 tty30 tty58 vcsa2 log ram13 sr1 tty31 tty59 vcsa3 loop0 ram14 stderr tty32 tty6 vcsa4 loop1 ram15 stdin tty33 tty60 vcsa5 loop2 ram2 stdout tty34 tty61 vcsa6 loop3 ram3 tty tty35 tty62 vcsa7 loop4 ram4 tty0 tty36 tty63 vga_arbiter loop5 ram5 tty1 tty37 tty7 zero And here is my fstab file: austin@austinvpn:/proc/scsi$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/austinvpn-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=ed5520ae-c690-4ce6-881e-3598f299be06 /boot ext2 defaults 0 2 /dev/mapper/austinvpn-swap_1 none swap sw 0 0 Am I missing something/doing something wrong, or is there just no CD in the drive or is the drive possibly broken? Is there any nice command to list devices with mountable media? Thanks in advance for any help!

Read the article

How do I get sound output on HDMI without the need to start X?

- by Magnus Hoff

I have a headless machine connected to my sound system, and I am using it to run a music playing daemon that I control over the network. (Among other things) However, I can't seem to be able to have sound come out of my speakers without running X. I am running pulse audio in a system wide instance and my daemon is not running within X. Nevertheless, when my daemon is playing music without me hearing it, I can fix it by running startx in an unrelated session. After X starts, I can hear the sound. The sound disappears again if I kill the X server. Interestingly/annoyingly, the sound also stops after X has been running for a few minutes. This could possibly be because of a screen saver of some sort, but I haven't been able to verify or falsify this theory. So my current workaround is to ssh into the box whenever I want music and startx, and restart it every fifteen minutes or so. I'd like to do better. I have been able to verify the following: Adjustments in alsamixer have no effect on this problem. The relevant output channel is never muted In alsamixer, I can see no difference between when the sound is working and when it isn't Nothing is muted in pactl list There is no difference in the output from pactl list between before starting X and after it's started. (Except the identifier of the pactl instance connected to pulse, which is different each time you run pactl) The user running the music daemon is a member of the groups audio, pulse and pulse-access The music daemon program does not report any error messages and acts as if it is playing the music like it should Some form of dbus daemon is running. ps aux|grep dbus reports dbus-daemon --system --fork --activation=upstart before and after I have started X Some details about my hardware: Motherboard: http://www.asus.com/Motherboards/AT5IONTI_DELUXE/ Sound chip: Nvidia GPU 0b HDMI/DP (from alsamixer) Using HDMI for output (Machine also has an Intel Realtek ALC887 that I am not using) Output of lsmod: Module Size Used by deflate 12617 0 zlib_deflate 27139 1 deflate ctr 13201 0 twofish_generic 16635 0 twofish_x86_64_3way 25287 0 twofish_x86_64 12907 1 twofish_x86_64_3way twofish_common 20919 3 twofish_generic,twofish_x86_64_3way,twofish_x86_64 camellia 29348 0 serpent 29125 0 blowfish_generic 12530 0 blowfish_x86_64 21466 0 blowfish_common 16739 2 blowfish_generic,blowfish_x86_64 cast5 25112 0 des_generic 21415 0 xcbc 12815 0 rmd160 16744 0 bnep 18281 2 rfcomm 47604 12 sha512_generic 12796 0 crypto_null 12918 0 parport_pc 32866 0 af_key 36389 0 ppdev 17113 0 binfmt_misc 17540 1 nfsd 281980 2 ext2 73795 1 nfs 436929 1 lockd 90326 2 nfsd,nfs fscache 61529 1 nfs auth_rpcgss 53380 2 nfsd,nfs nfs_acl 12883 2 nfsd,nfs sunrpc 255224 16 nfsd,nfs,lockd,auth_rpcgss,nfs_acl btusb 18332 2 vesafb 13844 2 pl2303 17957 1 ath3k 12961 0 bluetooth 180153 24 bnep,rfcomm,btusb,ath3k snd_hda_codec_hdmi 32474 4 nvidia 11308613 0 ftdi_sio 40679 1 usbserial 47113 6 pl2303,ftdi_sio psmouse 97485 0 snd_hda_codec_realtek 224173 1 snd_hda_intel 33719 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel serio_raw 13211 0 snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 79041 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device asus_atk0110 18078 0 mac_hid 13253 0 jc42 13948 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm coretemp 13554 0 i2c_i801 17570 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62154 0 Any ideas? What does X do that's so important?

Read the article

Folders in SQL Server Data Tools

- by jamiet

Recently I have begun a new project in which I am using SQL Server Data Tools (SSDT) and SQL Server Integration Services (SSIS) 2012. Although I have been using SSDT & SSIS fairly extensively while SQL Server 2012 was in the beta phase I usually find that you don’t learn about the capabilities and quirks of new products until you use them on a real project, hence I am hoping I’m going to have a lot of experiences to share on my blog over the coming few weeks. In this first such blog post I want to talk about file and folder organisation in SSDT. The predecessor to SSDT is Visual Studio Database Projects. When one created a new Visual Studio Database Project a folder structure was provided with “Schema Objects” and “Scripts” in the root and a series of subfolders for each schema: Apparently a few customers were not too happy with the tool arbitrarily creating lots of folders in Solution Explorer and hence SSDT has gone in completely the opposite direction; now no folders are created and new objects will get created in the root – it is at your discretion where they get moved to: After using SSDT for a few weeks I can safely say that I preferred the older way because I never used Solution Explorer to navigate my schema objects anyway so it didn’t bother me how many folders it created. Having said that the thought of a single long list of files in Solution Explorer without any folders makes me shudder so on this project I have been manually creating folders in which to organise files and I have tried to mimic the old way as much as possible by creating two folders in the root, one for all schema objects and another for Pre/Post deployment scripts: This works fine until different developers start to build their own different subfolder structures; if you are OCD-inclined like me this is going to grate on you eventually and hence you are going to want to move stuff around so that you have consistent folder structures for each schema and (if you have multiple databases) each project. Moreover new files get created with a filename of the object name + “.sql” and often people like to have an extra identifier in the filename to indicate the object type: The overall point is this – files and folders in your solution are going to change. Some version control systems (VCSs) don’t take kindly to files being moved around or renamed because they recognise the renamed/moved file simply as a new file and when they do that you lose the revision history which, to my mind, is one of the key benefits of using a VCS in the first place. On this project we have been using Team Foundation Server (TFS) and while it pains me to say it (as I am no great fan of TFS’s version control system) it has proved invaluable when dealing with the SSDT problems that I outlined above because it is integrated right into the Visual Studio IDE. Thus the advice from this blog post is: If you are using SSDT consider using an Visual-Studio-integrated VCS that can easily handle file renames and file moves I suspect that fans of other VCSs will counter by saying that their VCS weapon of choice can handle renames/file moves quite satisfactorily and if that’s the case…great…let me know about them in the comments. This blog post is not an attempt to make people use one particular VCS, only to make people aware of this issue that might rise when using SSDT. More to come in the coming few weeks! @jamiet

Read the article

OEG11gR2 integration with OES11gR2 Authorization with condition

- by pgoutin

Introduction This OES use-case has been defined originally by Subbu Devulapalli (http://accessmanagement.wordpress.com/). Based on this OES museum use-case, I have developed the OEG11gR2 policy able to deal with the OES authorization with condition. From an OEG point of view, the way to deal with OES condition is to provide with the OES request some Environmental / Context Attributes. Museum Use-Case All painting in the museum have security sensors, an alarm goes off when a person comes too close a painting. The employee designated for maintenance needs to use their ID and disable the alarm before maintenance. You are the Security Administrator for the museum and you have been tasked with creating authorization policies to manage authorization for different paintings. Your first task is to understand how paintings are organized. Asking around, you are surprised to see that there isno formal process in place, so you need to start from scratch. the museum tracks the following attributes for each painting 1. Name of the work 2. Painter 3. Condition (good/poor) 4. Cost You compile the list of paintings Name of Painting Painter Paint Condition Cost Mona Lisa Leonardo da Vinci Good 100 Magi Leonardo da Vinci Poor 40 Starry Night Vincent Van Gogh Poor 75 Still Life Vincent Van Gogh Good 25 Being a software geek who doesn’t (yet) understand art, you feel that price(or insurance price) of a painting is the most important criteria. So you feel that based on years-of-experience employees can be tasked with maintaining different paintings. You decide that paintings worth over 50 cost should be only handled by employees with over 20 years of experience and employees with less than 10 years of experience should not handle any painting. Lets us start with policy modeling. All paintings have a common set of attributes and actions, so it will be good to have them under a single Resource Type. Based on this resource type we will create the actual resources. So our high level model is: 1) Resource Type: Painting which has action manage and the following four attributes a) Name of the work b) Painter c) Condition (good/poor) d) Cost 2) To keep things simple lets use painting name for Resource name (in real world you will try to use some identifier which is unique, because in future we may end up with more than one painting which has the same name.) 3) Create Resources based on the previous table 4) Create an identity attribute Experience (Integer) 5) Create the following authorization policies a) Allow employees with over 20 years experience to access all paintings b) Allow employees with 10 – 20 years of experience to access painting which cost less than 50 c) Deny access to all paintings for employees with less than 10 year of experience OES Authorization Configuration We do need to create 2 authorization policies with specific conditions a) Allow employees with over 20 years experience to access all paintings b) Allow employees with 10 – 20 years of experience to access painting which cost less than 50 c) Deny access to all paintings for employees with less than 10 year of experience We don’t need an explicit policy for Deny access to all paintings for employees with less than 10 year of experience, because Oracle Entitlements Server will automatically deny if there is no matching policy. OEG Policy The OEG policy looks like the following The 11g Authorization filter configuration is similar to : The ${PAINTING_NAME} and ${USER_EXPERIENCE} variables are initialized by the "Retrieve from the HTTP header" filters for testing purpose. That's to say, under Service Explorer, we need to provide 2 attributes "Experience" & "Painting" following the OES 11g Authorization filter described above.

Read the article

Web Application Integration Steps in OAM 11gR2 (High Level)

- by Venkata Srikanth

Install OAM, Webtier (OHS) and WebGate as per the standard installation steps. Create a WebGate instance (i.e deploy WebGate) A WebGate instance must be created that will copy required bits of agent from WEBGATE_HOME to WebGate instance location that shares the same INSTANCE_HOME with OHS ./deployWebGateInstance.sh –w /Oracle/Middleware/Oracle_WT1/instances/instance1/config/ohs1 –oh /Oracle/Middleware/Oracle_OAMWebGate1 Note: Here –w flag indicates OHS instance folder and –oh indicates the WebGate Oracle home Configure WebGate In the webgate configuration the EditHttpdConf utility will copy OUI instantiated apache_webgate.template from WEBGATE_HOME to webgate instance location (renamed to webgate.conf), and update httpd.conf with one additional line to include webgate.conf. export LD_LIBRARY_PATH=$ LD_LIBRARY_PATH:/Oracle/Middleware/Oracle_WT1/lib Navigate to /Oracle/Middleware/Oracle_OAMWebGate1/webgate/ohs/tools/setup/InstallTools ./EditHttpdConf –w /Oracle/Middleware/Oracle_WT1/instances/instace1/config/OHS/ohs1 –oh /Oracle/Middleware/Oracle_OAMWebGate1 –o webgate.conf Register WebGate Use RREG tool to register the OAM 11G WebGate Navigate to /Oracle/Middleware/Oracle_IDM1/oam/server/rreg/input Edit OAM11Grequest.xml. Change the specific xml content to include the weblogic admin URL, agentBaseURL, host identifier etc.. Navigate to /Oracle/Middleware/Oracle_IDM1/oam/server/rreg/bin Set permissions to oamreg.sh à chmod 777 oamreg.sh Edit oamreg.sh and set OAM_REG_HOME=/Oracle/Middleware/Oracle_IDM1/oam/server/rreg ./oamreg.sh inband input/OAM11Grequest.xml Enter the WebLogic admin credentials when prompted. After performing the above steps, there will be two artifcats created under Oracle/Middleware/Oracle_IDM1/oam/server/rreg/output, namely ObAccessClient.xml (Stroing webgate config parameters) and cwallet.sso (storing the agent key). These files must be copied to WebGate instance config folder (/Oracle/Middleware/Oracle_WT1/instances/instance1/config/ohs1/webgate/config) Restart OHS Deploy the web application (myApp) in WebLogic application server Proxy Configuration in OHS The mod_wl_ohs module enables requests to be proxied from Oracle HTTP Server 11g to Oracle WebLogic Server. Navigate to /Oracle/Middleware/Oracle_WT1/instances/instance1/config/OHS/ohs1 Edit mod_wl_ohs.conf file to include the following: <IfModule weblogic_module> WebLogicHost <WEBLOGIC_HOST> WebLogicPort <WEBLOGIC_PORT> # Debug ON # WLLogFile /tmp/weblogic.log MatchExpression *.jsp </IfModule> <Location /myApp> SetHandler weblogic-handler # PathTrim /weblogic # ErrorPage http:/WEBLOGIC_HOME:WEBLOGIC_PORT/ </Location> Note: Here WEBLOGIC_HOST and WEBLOGIC_PORT are the WebLogic admin server host and port respectively Restart OHS. Now if we access the web application URL with OHS host and port (Ex: http://OHS_HOST:<OHS_PORT>/myApp) so that the requests will be proxied to WebLogic server. Create a new application domain Login to OAM Admin Console Navigate to Shared Componentsà Authentication Schemesà Create Authentication Scheme (Ex: LDAP Auth Scheme. Here the scheme is assoicated with LDAP Authentication Module) Navigate to Policy Configuration à Application Domain à Create Application Domain Enter the Application Domain Name and Click Apply. Navigate to Resources tab and add the resource urls (Web Application URLs that needs to be protected) Navigate to Authentication Policy tab à Create a new authentication ploicy by providing the Resource URLs (The sample Web Application URLs) and Authentication Scheme. Navigate to Authorization Policy tab à Create a new authorization policy à Enter authorization policy name and navigate to Resource Tab à Attach the Reource URL, Host Identifiers here. Navigate to Conditions tab à Add the conditions like whom to allow and whom to deny access. Navigate to Rules tab à Crate the Allow Rule and Deny Rule with the available conditions from the previous step so that the Authorization Policy may authorize the logins. Navigate to Resources tab and attach the Authentication and Authorization plocies created in the above steps. Test the Web Application Integration.

Read the article

HPCM 11.1.2.2.x - HPCM Standard Costing Generating >99 Calc Scipts

- by Jane Story

HPCM Standard Profitability calculation scripts are named based on a documented naming convention. From 11.1.2.2.x, the script name = a script suffix (1 letter) + POV identifier (3 digits) + Stage Order Number (1 digit) + “_” + index (2 digits) (please see documentation for more information (http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_admin/apes01.html). This naming convention results in the name being 8 characters in length i.e. the maximum number of characters permitted calculation script names in non-unicode Essbase BSO databases. The index in the name will indicate the number of scripts per stage. In the vast majority of cases, the number of scripts generated per stage will be significantly less than 100 and therefore, there will be no issue. However, in some cases, the number of scripts generated can exceed 99. It is unusual for an application to generate more than 99 calculation scripts for one stage. This may indicate that explicit assignments are being extensively used. An assessment should be made of the design to see if assignment rules can be used instead. Assignment rules will reduce the need for so many calculation script lines which will reduce the requirement for such a large number of calculation scripts. In cases where the scripts generates exceeds 100, the length of the name of the 100th calculation script is different from the 99th as the calculation script name changes from being 8 characters long and becomes 9 characters long (e.g. A6811_100 rather than A6811_99). A name of 9 characters is not permitted in non Unicode applications. It is “too long”. When this occurs, an error will show in the hpcm.log as “Error processing calculation scripts” and “Unexpected error in business logic “. Further down the log, it is possible to see that this is “Caused by: Error copying object “ and “Caused by: com.essbase.api.base.EssException: Cannot put olap file object ... object name_[<calc script name> e.g. A6811_100] too long for non-unicode mode application”. The error file will give the name of the calculation script which is causing the issue. In my example, this is A6811_100 and you can see this is 9 characters in length. It is not possible to increase the number of characters allowed in a calculation script name. However, it is possible to increase the size of each calculation script. The default for an HPCM application, set in the preferences, is set to 4mb. If the size of each calculation script is larger, the number of scripts generated will reduce and, therefore, less than 100 scripts will be generated which means that the name of the calculation script will remain 8 characters long. To increase the size of the generated calculation scripts for an application, in the HPM_APPLICATION_PREFERENCE table for the application, find the row where HPM_PREFERENCE_NAME_ID=20. The default value in this row is 4194304. This can be increased e.g. 7340032 will increase this to 7mb. Please restart the profitability service after making the change.

Read the article

AWS .NET SDK v2: setting up queues and topics

- by Elton Stoneman

Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/13/aws-.net-sdk-v2-setting-up-queues-and-topics.aspxFollowing on from my last post, reading from SQS queues with the new SDK is easy stuff, but linking a Simple Notification Service topic to an SQS queue is a bit more involved. The AWS model for topics and subscriptions is a bit more advanced than in Azure Service Bus. SNS lets you have subscribers on multiple different channels, so you can send a message which gets relayed to email address, mobile apps and SQS queues all in one go. As the topic owner, when you request a subscription on any channel, the owner needs to confirm they’re happy for you to send them messages. With email subscriptions, the user gets a confirmation request from Amazon which they need to reply to before they start getting messages. With SQS, you need to grant the topic permission to write to the queue. If you own both the topic and the queue, you can do it all in code with the .NET SDK. Let’s say you want to create a new topic, a new queue as a topic subscriber, and link the two together. Creating the topic is easy with the SNS client (which has an expanded name, AmazonSimpleNotificationServiceClient, compare to the SQS class which is just called QueueClient): var request = new CreateTopicRequest(); request.Name = TopicName; var response = _snsClient.CreateTopic(request); TopicArn = response.TopicArn; In the response from AWS (which I’m assuming is successful), you get an ARN – Amazon Resource Name – which is the unique identifier for the topic. We create the queue using the same code from my last post, AWS .NET SDK v2: the message-pump pattern, and then we need to subscribe the queue to the topic. The topic creates the subscription request: var response = _snsClient.Subscribe(new SubscribeRequest { TopicArn = TopicArn, Protocol = "sqs", Endpoint = _queueClient.QueueArn }); That response will give you an ARN for the subscription, which you’ll need if you want to set attributes like RawMessageDelivery. Then the SQS client needs to confirm the subscription by allowing the topic to send messages to it. The SDK doesn’t give you a nice mechanism for doing that, so I’ve extended my AWS wrapper with a method that encapsulates it: internal void AllowSnsToSendMessages(TopicClient topicClient) { var policy = Policies.AllowSendFormat.Replace("%QueueArn%", QueueArn).Replace("%TopicArn%", topicClient.TopicArn); var request = new SetQueueAttributesRequest(); request.Attributes.Add("Policy", policy); request.QueueUrl = QueueUrl; var response = _sqsClient.SetQueueAttributes(request); } That builds up a policy statement, which gets added to the queue as an attribute, and specifies that the topic is allowed to send messages to the queue. The statement itself is a JSON block which contains the ARN of the queue, the ARN of the topic, and an Allow effect for the sqs:SendMessage action: public const string AllowSendFormat= @"{ ""Statement"": [ { ""Sid"": ""MySQSPolicy001"", ""Effect"": ""Allow"", ""Principal"": { ""AWS"": ""*"" }, ""Action"": ""sqs:SendMessage"", ""Resource"": ""%QueueArn%"", ""Condition"": { ""ArnEquals"": { ""aws:SourceArn"": ""%TopicArn%"" } } } ] }"; There’s a new gist with an updated QueueClient and a new TopicClient here: Wrappers for the SQS and SNS clients in the AWS SDK for .NET v2. Both clients have an Ensure() method which creates the resource, so if you want to create a topic and a subscription you can use: var topicClient = new TopicClient(“BigNews”, “ImListening”); And the topic client has a Subscribe() method, which calls into the message pump on the queue client: topicClient.Subscribe(x=>Log.Debug(x.Body)); var message = {}; //etc. topicClient.Publish(message); So you can isolate all the fiddly bits and use SQS and SNS with a similar interface to the Azure SDK.

Read the article

Moving monarchs and dragons: migrating the JDK bugs to JIRA

- by darcy

Among insects, monarch butterflies and dragonflies have the longest migrations; migrating JDK bugs involves a long journey as well! As previously announced by Mark back in March, we've been working according to a revised plan to transition the JDK bug management from Sun's legacy system to initially an Oracle-internal JIRA instance which is afterward made visible and usable externally. I've been busily working on this project for the last few months and the team has made good progress on many aspects of the effort: JDK bugs will be imported into JIRA regardless of age; bugs will also be imported regardless of state, including closed bugs. Consequently, the JDK bug project will start pre-populated with over 100,000 existing bugs, some dating all the way back to 1994. This will allow a continuity of information and allow new issues to be linked to old ones. Using a custom import process, the Sun bug numbers will be preserved in JIRA. For example, the Sun bug with bug number 4040458 will become "JDK-4040458" in JIRA. In JIRA the project name, "JDK" in our case, is part of the bug's identifier. Bugs created after the JIRA migration will be numbered starting at 8000000; bugs imported from the legacy system have numbers ranging between 1000000 and 79999999. We're working with the bugs.sun.com team to try to maintain continuity of the ability to both read JDK bug information as well as to file new incidents. At least for now, the overall architecture of bugs.sun.com will be the same as it is today: it will be a gateway bridging to an Oracle-internal system, but the internal system will change to JIRA from the legacy database. Generally we are aiming to preserve the visibility of bugs currently viewable on bugs.sun.com; however, bugs in areas not related to the JDK will not be visible after the transition to JIRA. New incoming incidents will be sent to a separate JIRA project for initial triage before possibly being moved into the JDK project. JDK bug management leans heavily on being able to track the state of bugs in multiple releases, especially to coordinate delivering synchronized security releases (known as CPUs, critital patch updates, in Oracle parlance). For a security release, it is common for half a dozen or more release trains to be affected (for example, JDK 5, JDK 6 update, OpenJDK 6, JDK 7 update, JDK 8, virtual releases for HotSpot express, etc.). We've determined we need to track at least the tuple of (release, responsible engineer/assignee for the release, status in the release) for the release trains a fix is going into. To do this in JIRA, we are creating a separate port/backport issue type along with a custom link type to allow the multiple release information to be easily grouped and presented together. The Sun legacy system had a three-level classification scheme, product, category, and subcategory. Out of the box, JIRA only has a one-level classification, component. We've implemented a custom second-level classification, subcomponent. As part of the bug migration we've taken the opportunity to think about how bugs should be grouped under a two-level system and we'll the new system will be simpler and more regular. The main top-level components of the JDK product will include: core-libs client-libs deploy install security-libs other-libs tools hotspot For the libs areas, the primary name of the subcomportment will be the package of the API in question. In the core-libs component, there will be subcomponents like: java.lang java.lang.class_loading java.math java.util java.util:i18n In the tools component, subcomponents will primarily correspond to command names in $JDK/bin like, jar, javac, and javap. The first several bulk imports of the JDK bugs into JIRA have gone well and we're continuing to refine the import to have greater fidelity to the current data, including by reconstructing information not brought over in a structured fashion during the previous large JDK bug system migration back in 2004. We don't currently have a firm timeline of when the new system will be usable externally, but as it becomes available, I'll share further information in follow-up blog posts.

Read the article

Swap not available on System Monitor

- by Zaki

I had a swap partition of 1GB (RAM 1GB, Ubuntu 12.04 lts). Now swap is not shown on System Monitor neither can I hibernate my pc (sudo pm-hibernate). blkid output: /dev/sda1: UUID="B8B4FBB1B4FB706C" TYPE="ntfs" /dev/sda2: UUID="2ea7d608-2d89-4e41-9436-d05cb3ce8871" TYPE="swap" /dev/sda3: UUID="3219d03a-67e4-454b-8ce7-a27831846e35" TYPE="ext4" /dev/sda5: LABEL="Softwares" UUID="AC1CC3301CC2F47C" TYPE="ntfs" /dev/sda6: LABEL="Education" UUID="1E103E6C103E4B53" TYPE="ntfs" /dev/sda7: LABEL="Recreation" UUID="2CC8D181C8D149AA" TYPE="ntfs" /dev/sda8: LABEL="Miscellaneous" UUID="0274D6B174D6A727" TYPE="ntfs" /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=3219d03a-67e4-454b-8ce7-a27831846e35 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=2ea7d608-2d89-4e41-9436-d05cb3ce8871 none swap sw 0 0 free -m total used free shared buffers cached Mem: 991 867 123 0 27 418 -/+ buffers/cache: 421 569 Swap: 0 0 0 cat /proc/swaps Filename Type Size Used Priority fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9f369f36 Device Boot Start End Blocks Id System /dev/sda1 * 63 31471334 15735636 7 HPFS/NTFS/exFAT /dev/sda2 31471616 33470447 999416 82 Linux swap / Solaris /dev/sda3 33472512 62539775 14533632 83 Linux /dev/sda4 62541045 312592769 125025862+ f W95 Ext'd (LBA) /dev/sda5 62541108 125066024 31262458+ 7 HPFS/NTFS/exFAT /dev/sda6 125066088 187591004 31262458+ 7 HPFS/NTFS/exFAT /dev/sda7 187591068 250115984 31262458+ 7 HPFS/NTFS/exFAT /dev/sda8 250116048 312576704 31230328+ 7 HPFS/NTFS/exFAT swapon --all swapon: /dev/sda2: swapon failed: Invalid argument dmesg | grep -A 5 -B 5 -i swap [ 9.487404] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131645 [ 9.487413] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131330 [ 9.487418] EXT4-fs (sda3): 16 orphan inodes deleted [ 9.487420] EXT4-fs (sda3): recovery complete [ 9.578600] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 20.580539] Swap area shorter than signature indicates [ 20.588363] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.619443] udevd[330]: starting version 175 [ 20.649959] lp: driver loaded but no devices found [ 20.662972] [drm] Initialized drm 1.1.0 20060810 [ 20.675515] i915 0000:00:02.0: setting latency timer to 64 -- [ 72.288573] PM: thaw of drv:sr dev:3:0:0:0 complete after 178.143 msecs [ 72.288578] PM: thaw of drv:scsi_device dev:3:0:0:0 complete after 178.136 msecs [ 72.299677] PM: thaw of drv:scsi_device dev:2:0:0:0 complete after 189.270 msecs [ 72.309473] PM: thaw of devices complete after 202.763 msecs [ 72.309668] PM: writing image. [ 72.309670] PM: Cannot find swap device, try swapon -a. [ 72.309699] PM: Cannot get swap writer [ 72.329896] Restarting tasks ... done. [ 72.331777] PM: Basic memory bitmaps freed [ 72.331792] video LNXVIDEO:00: Restoring backlight state [ 72.420048] option1 ttyUSB0: option_instat_callback: error -84 [ 72.804047] option1 ttyUSB0: option_instat_callback: error -84 -- [ 145.960625] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 145.972036] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 172.430508] PPP BSD Compression module registered [ 172.455583] PPP Deflate Compression module registered [ 332.260789] type=1400 audit(1381814763.342:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 1913.030998] Swap area shorter than signature indicates [ 2022.530155] type=1400 audit(1381816453.610:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 4062.729509] Swap area shorter than signature indicates Please help. Thanks in advance. df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 14G 6.1G 7.0G 47% / udev 488M 4.0K 488M 1% /dev tmpfs 199M 868K 198M 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 496M 224K 496M 1% /run/shm

Read the article

Session and Pop Up Window

- by imran_ku07

Introduction : Session is the secure state management. It allows the user to store their information in one page and access in another page. Also it is so much powerful that store any type of object. Every user's session is identified by their cookie, which client presents to server. But unfortunately when you open a new pop up window, this cookie is not post to server with request, due to which server is unable to identify the session data for current user. In this Article i will show you how to handle this situation, Description : During working in a application, i was getting an Exception saying that Session is null, when a pop window opens. After seeing the problem more closely i found that ASP.NET_SessionId cookie for parent page is not post in cookie header of child (popup) window. Therefore for making session present in both parent and child (popup) window, you have to present same cookie. For cookie sharing i passed parent SessionID in query string, window.open('http://abc.com/s.aspx?SASID=" & Session.SessionID &','V'); and in Application_PostMapRequestHandler application Event, check if the current request has no ASP.NET_SessionId cookie and SASID query string is not null then add this cookie to Request before Session is acquired, so that Session data remain same for both parent and popup window. Private Sub Application_PostMapRequestHandler(ByVal sender As Object, ByVal e As EventArgs) If (Request.Cookies("ASP.NET_SessionId") Is Nothing) AndAlso (Request.QueryString("SASID") IsNot Nothing) Then Request.Cookies.Add(New HttpCookie("ASP.NET_SessionId", Request.QueryString("SASID"))) End If End Sub Now access Session in your parent and child window without any problem. How this works : ASP.NET (both Web Form or MVC) uses a cookie (ASP.NET_SessionId) to identify the user who is requesting. Cookies are may be persistent (saved permanently in user cookies ) or non-persistent (saved temporary in browser memory). ASP.NET_SessionId cookie saved as non-persistent. This means that if the user closes the browser, the cookie is immediately removed. This is a sensible step that ensures security. That's why ASP.NET unable to identify that the request is coming from the same user. Therefore every browser instance get it's own ASP.NET_SessionId. To resolve this you need to present the same parent ASP.NET_SessionId cookie to the server when open a popup window. You can confirm this situation by using some tools like Firebug, Fiddler, Summary : Hopefully you will enjoy after reading this article, by seeing that how to workaround the problem of sharing Session between different browser instances by sharing their Session identifier Cookie.

Read the article

How can I make sound work without starting X?

- by Magnus Hoff

I have a headless machine connected to my sound system, and I am using it to run a music playing daemon that I control over the network. (Among other things) However, I can't seem to be able to have sound come out of my speakers without running X. I am running pulse audio in a system wide instance and my daemon is not running within X. Nevertheless, when my daemon is playing music without me hearing it, I can fix it by running startx in an unrelated session. After X starts, I can hear the sound. The sound disappears again if I kill the X server. Interestingly/annoyingly, the sound also stops after X has been running for a few minutes. This could possibly be because of a screen saver of some sort, but I haven't been able to verify or falsify this theory. So my current workaround is to ssh into the box whenever I want music and startx, and restart it every fifteen minutes or so. I'd like to do better. I have been able to verify the following: Adjustments in alsamixer have no effect on this problem. The relevant output channel is never muted In alsamixer, I can see no difference between when the sound is working and when it isn't Nothing is muted in pactl list There is no difference in the output from pactl list between before starting X and after it's started. (Except the identifier of the pactl instance connected to pulse, which is different each time you run pactl) The user running the music daemon is a member of the groups audio, pulse and pulse-access The music daemon program does not report any error messages and acts as if it is playing the music like it should Some form of dbus daemon is running. ps aux|grep dbus reports dbus-daemon --system --fork --activation=upstart before and after I have started X Some details about my hardware: Motherboard: http://www.asus.com/Motherboards/AT5IONTI_DELUXE/ Sound chip: Nvidia GPU 0b HDMI/DP (from alsamixer) Using HDMI for output (Machine also has an Intel Realtek ALC887 that I am not using) Output of lsmod: Module Size Used by deflate 12617 0 zlib_deflate 27139 1 deflate ctr 13201 0 twofish_generic 16635 0 twofish_x86_64_3way 25287 0 twofish_x86_64 12907 1 twofish_x86_64_3way twofish_common 20919 3 twofish_generic,twofish_x86_64_3way,twofish_x86_64 camellia 29348 0 serpent 29125 0 blowfish_generic 12530 0 blowfish_x86_64 21466 0 blowfish_common 16739 2 blowfish_generic,blowfish_x86_64 cast5 25112 0 des_generic 21415 0 xcbc 12815 0 rmd160 16744 0 bnep 18281 2 rfcomm 47604 12 sha512_generic 12796 0 crypto_null 12918 0 parport_pc 32866 0 af_key 36389 0 ppdev 17113 0 binfmt_misc 17540 1 nfsd 281980 2 ext2 73795 1 nfs 436929 1 lockd 90326 2 nfsd,nfs fscache 61529 1 nfs auth_rpcgss 53380 2 nfsd,nfs nfs_acl 12883 2 nfsd,nfs sunrpc 255224 16 nfsd,nfs,lockd,auth_rpcgss,nfs_acl btusb 18332 2 vesafb 13844 2 pl2303 17957 1 ath3k 12961 0 bluetooth 180153 24 bnep,rfcomm,btusb,ath3k snd_hda_codec_hdmi 32474 4 nvidia 11308613 0 ftdi_sio 40679 1 usbserial 47113 6 pl2303,ftdi_sio psmouse 97485 0 snd_hda_codec_realtek 224173 1 snd_hda_intel 33719 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel serio_raw 13211 0 snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 79041 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device asus_atk0110 18078 0 mac_hid 13253 0 jc42 13948 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm coretemp 13554 0 i2c_i801 17570 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62154 0 Any ideas? What does X do that's so important?

Read the article

Sparse virtual machine disk image resizing weirdness?

- by Matt H

I have a partitioned virtual machine disk image created by vmware. What I want to do is resize that by 10GB. The file size is showing as 64424509440. Or 60GB. So I ran this: dd if=/dev/zero of=./win7.img seek=146800640 count=0 It ran without errors and I can verify the new size is in fact 75161927680 bytes or 70GB. This is where it gets a little odd. I started the guest domain in xen which is a Windows 7 enterprise machine. What I was expecting to see in diskmgmt.msc is 2 partitions. 1 system partition at the start of around 100MB and near 60GB partition (which is C drive) followed by around 10GB of free space. Actually what I saw was a 70GB partition!?! That confused me... so I decided to run the Check Disk which when you set it on the C drive it asks you to reboot so it'll run on boot. So I did that and during the boot it ran the checks. It got all the way through stage 3 and didn't show any errors at all. Looked at the partitions in disk manager and now C drive has shrunk back to 60GB and there is no free space. What gives? Ok, I thought I'd try mounting it under Dom0 and examining it with fdisk. This is what I get when mounted sudo xl block-attach 0 tap:aio:/home/xen/vms/otoy_v1202-xen.img xvda w sudo fdisk -l /dev/xvda Disk /dev/xvda: 64.4 GB, 64424509440 bytes 255 heads, 63 sectors/track, 7832 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x582dfc96 Device Boot Start End Blocks Id System /dev/xvda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/xvda2 13 7833 62810112 7 HPFS/NTFS Note the cylinder boundary comment. When I run sudo cfdisk /dev/xvda I get: FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder Press any key to exit cfdisk So I guess this is a bigger problem than first thought. How can I fix this? EDIT: Oops, the cylinder boundary thing is not a problem at all since disks have used LBA etc. So that threw me for a moment... still the problem exists... Now this output looks a little different. sudo sfdisk -uS -l /dev/xvda Disk /dev/xvda: 7832 cylinders, 255 heads, 63 sectors/track Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/xvda1 * 2048 206847 204800 7 HPFS/NTFS /dev/xvda2 206848 125827071 125620224 7 HPFS/NTFS /dev/xvda3 0 - 0 0 Empty /dev/xvda4 0 - 0 0 Empty BTW: I do have a backup of the image so if you help me mess it up that's ok. EDIT: sudo parted /dev/xvda print free Model: Xen Virtual Block Device (xvd) Disk /dev/xvda: 64.4GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 32.3kB 1049kB 1016kB Free Space 1 1049kB 106MB 105MB primary ntfs boot 2 106MB 64.4GB 64.3GB primary ntfs 64.4GB 64.4GB 1049kB Free Space Cool. Linux is showing free space is 10GB which is what I expect. The problem is windows isn't seeing this?

Read the article

A developer’s WBS – 3 factors of 5

- by johndoucette

As a development manager, I have requested work breakdown structures (WBS) many times from the dev leads. Everyone has their own approach and why it takes sometimes days to get this simple list is often frustrating. Here is a simple way to get that elusive WBS done in 30 minutes and have 125 items in your list – well, 126. The WBS is made up of parent-child entities representing the overall outcome of the project. At the bottom of the hierarchical list should be the task item that a developer would perform in support of the branch in the list or WBS. Because I work with different dev leads on every project, I always ask the “what time value would you like to see at the lowest task in order to assign it to a developer and ensure it gets done within the timeframe”. I am particular to a task being 8 hours. Some like 8 to 24 hours. Stay away from tasks defaulting to 1 week. The task becomes way to vague and hard to manage completeness, especially on short budgets. As a developer, your focus is identifying the tasks you to accomplish in order to deliver the product. As a project manager, you will take the developer's WBS and add all the “other stuff” like quality testing, meetings, documentation, transition to maintenance, etc… Start your exercise with the name of the product you are delivering as a result of the project. You should be able to represent what you are building and deploying with one to three words. Example; XYZ Public Website Middleware BizTalk Application The reason you start with that single identifier is to always see the list as the product. It helps during each of the next three passes. Now, choose 5 tasks which in their entirety represent the product you will be delivering and add them to list under the product name you created earlier; Public Website Security Sites Infrastructure Publishing Creative Continue this concept of seeing the list as the complete picture and decompose it one more level. You should have 25 items. Public Website Security Authentication Login Control Administration DRM Workflow Sites Masterpages Page Layouts Web Parts (RIA, Multimedia) Content Types Structures Infrastructure ... Publishing ... Creative ... And one more time for a total of 125 items. The top item makes the list 126. Public Website Security Authentication Install (AD/ADAM/LDAP/SQL) Configuration Management Web App Configuration Implement Provider Login Control Login Form Login/Logoff pw change pw recover/forgot email verification Administration ... DRM ... Workflow ... Sites Masterpages Page Layouts Web Parts (RIA, Multimedia) Content Types Structures Infrastructure ... Publishing ... Creative ... The next step is to make sure the task at the bottom of every branch represents the “time value” you planned for the project. You can add more to the WBS and of course if you can’t find 5 items, 4 is fine. If a task can be done in a fraction of the time value you determined for the project, try to roll it up into a larger task. In the task actions (later when the iteration is being planned), decompose the details back to the simple tasks. Now, go estimate!

Read the article

disks not ready in array causes mdadm to force initramfs shell

- by RaidPinata

Okay, this is starting to get pretty frustrating. I've read most of the other answers on this site that have anything to do with this issue but I'm still not getting anywhere. I have a RAID 6 array with 10 devices and 1 spare. The OS is on a completely separate device. At boot only three of the 10 devices in the raid are available, the others become available later in the boot process. Currently, unless I go through initramfs I can't get the system to boot - it just hangs with a blank screen. When I do boot through recovery (initramfs), I get a message asking if I want to assemble the degraded array. If I say no and then exit initramfs the system boots fine and my array is mounted exactly where I intend it to. Here are the pertinent files as near as I can tell. Ask me if you want to see anything else. # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default (built-in), scan all partitions (/proc/partitions) and all # containers for MD superblocks. alternatively, specify devices to scan, using # wildcards if desired. #DEVICE partitions containers # auto-create devices with Debian standard permissions # CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays # This file was auto-generated on Tue, 13 Nov 2012 13:50:41 -0700 # by mkconf $Id$ ARRAY /dev/md0 level=raid6 num-devices=10 metadata=1.2 spares=1 name=Craggenmore:data UUID=37eea980:24df7b7a:f11a1226:afaf53ae Here is fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sdc2 during installation UUID=3fa1e73f-3d83-4afe-9415-6285d432c133 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdc3 during installation UUID=c4988662-67f3-4069-a16e-db740e054727 none swap sw 0 0 # mount large raid device on /data /dev/md0 /data ext4 defaults,nofail,noatime,nobootwait 0 0 output of cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sda[0] sdd[10](S) sdl[9] sdk[8] sdj[7] sdi[6] sdh[5] sdg[4] sdf[3] sde[2] sdb[1] 23441080320 blocks super 1.2 level 6, 512k chunk, algorithm 2 [10/10] [UUUUUUUUUU] unused devices: <none> Here is the output of mdadm --detail --scan --verbose ARRAY /dev/md0 level=raid6 num-devices=10 metadata=1.2 spares=1 name=Craggenmore:data UUID=37eea980:24df7b7a:f11a1226:afaf53ae devices=/dev/sda,/dev/sdb,/dev/sde,/dev/sdf,/dev/sdg,/dev/sdh,/dev/sdi,/dev/sdj,/dev/sdk,/dev/sdl,/dev/sdd Please let me know if there is anything else you think might be useful in troubleshooting this... I just can't seem to figure out how to change the boot process so that mdadm waits until the drives are ready to build the array. Everything works just fine if the drives are given enough time to come online. edit: changed title to properly reflect situation

Read the article

How to get faster graphics in KVM? VNC is painfully slow with Haiku OS guest, Spice won't install and SDL doesn't work

- by Don Quixote

I've been coming up to speed on the Haiku operating system, an Open Source clone of BeOS 5 Pro. I'm using an Apple MacBook Pro as my development machine. Apple's BootCamp BIOS does not support more than four partitions on the internal hard drive. While I can set up extended and logical partitions, doing so will prevent any of the installed operating systems from booting. To run Haiku directly on the iron, I boot it off a USB stick. Using external storage is also helpful because I am perpetually out of filesystem space. While VirtualBox is documented to allow access to physical drives, I could not actually get it to work. Also VirtualBox can only use one of the host CPU's cores. While VB guests can be configured for more than one CPU, they are only emulated. A full build of the Haiku OS takes 4.5 under VB. I had the hope of reducing build times by using KVM instead, but it's not working nearly as well as VirtualBox did. The Linux Kernel Virtual Machine is broken in all manner of fundamental ways as seen from Haiku. But I'm a coder; maybe I could contribute to fixing some of those problems. The first problem I've got is that Haiku's video in virt-manager is quite painfully slow. When I drag Haiku windows around the desktop, they lag quite far behind where my mouse is. It's quite difficult to move a window to a precise position on the screen. Just imagine that the mouse was connected to the window title bar with a really stretchy spring. Also Haiku's mouse lags quite far behind where I have moved it. I found lots of Personal Package Archives that enable Spice from QEMU / KVM at the Ubuntu Personal Package Arhives. I tried a few of the PPAs but none of them worked; with one of them, the command "add-apt-repository" crashed with a traceback. There is a Wiki page about Spice, but it says that it only works on 64-bit. My Early 2006 MacBook Pro is 32-bit. Its Apple Model Identifier is MacBookPro1,1; these use Core Duos NOT Core 2 Duos. I don't mind building a source deb for 32-bit if I can expect it to work. Is there some reason that Spice should be 64-bit only? Does it need features of the x86_64 Instruction Set Architecture that x86 does not have? When I try using SDL from virt-manager, the configuration for Local SDL Window says "Xauth: /home/mike/.Xauthority". When I try to start my guest, virt-manager emits an error. When I Googled the error message, the usual solution was to make ~/.Xauthority readible. However, .Xauthorty does not exist in my home directory. Instead I have a $XAUTHORITY environment variable. There is no way to configure SDL in virt-manager to use $XAUTHORITY instead of ~/.Xauthority. Neither does it work to copy the value of $XAUTHORITY into the file. I am ready to scream, because I've been five fscking days trying to make KVM work for Haiku development. There is a whole lot more that is broken than the slow video. All I really want to do for now is speed up my full builds of Haiku by using "jam -j2" to use both cores in my CPU. I may try Xen next, but the last time I monkeyed with Xen it was far, far more broken than I am finding KVM to be. Just for now, I would be satisfied if there were some way to use my USB stick as a drive in VirtualBox. VB does allow me to configure /dev/sdb as a drive, but it always causes a fatal error when I try to launch the guest. Thank You For Any Advice You Can Give Me. -

Read the article

Designing An ACL Based Permission System

- by ryanzec

I am trying to create a permissions system where everything is going to be stored in MySQL (or some database) and pulled using PHP for a project management system I am building. I am right now trying to do it is an ACL kind of way. There are a number key features I want to be able to support: 1. Being able to assign permissions without being tied to a specific object. The reason for this is that I want to be able to selectively show/hide elements of the UI based on permissions at a point where I am not directly looking at a domain object instance. For instance, a button to create a new project should only should only be shown to users that have the pm.project.create permission but obviously you can assign a create permission to an domain object instance (as it is already created). 2. Not have to assign permissions for every single object. Obviously creating permissions entries for every single object (projects, tickets, comments, etc…) would become a nightmare to maintain so I want to have some level of permission inheritance. *3. Be able to filter queries based on permissions. This would be a really nice to have but I am not sure if it is possible. What I mean by this is say I have a page that list all projects. I want the query that pulls all projects to incorporate the ACL so that it would not show projects that the current user does not have pm.project.read access to. This would have to be incorporated into the main query as if it is a process that is done after that main query (which I know I could do) certain features like pagination become much more difficult. Right now this is my basic design for the tables: AclEntities id - the primary key key - the unique identifier for the domain object (usually the primary key of that object) parentId - the parent of the domain object (like the project object if this was a ticket object) aclDomainObjectId - metadata about the domain object AclDomainObjects id - primary key title - simple string to unique identify the domain object(ie. project, ticket, comment, etc…) fullyQualifiedClassName - the fully qualified class name for use in code (I am using namespaces) There would also be tables mapping AclEntities to Users and UserGroups. I also have this interface that all acl entity based object have to implement: IAclEntity getAclKey() - to the the unique key for this specific instance of the acl domain object (generally return the primary key or a concatenated string of a composite primary key) getAclTitle() - to get the unique title for the domain object (generally just returning a static string) getAclDisplayString() - get the string that represents this entity (generally one or more field on the object) getAclParentEntity() - get the parent acl entity object (or null if no parent) getAclEntity() - get the acl enitty object for this instance of the domain object (or null if one has not been created yet) hasPermission($permissionString, $user = null) - whether or not the user has the permission for this instance of the domain object static getFromAclEntityId($aclEntityId) - get a specific instance of the domain object from an acl entity id. Do any of these features I am looking for seems hard to support or are just way off base? Am I missing or not taking in account anything in my implementation? Is performance something I should keep in mind?

Search Results

Search found 2533 results on 102 pages for 'fragment identifier'.

Page 81/102 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88 | Next Page >

- by fx.nicolas

- by [email protected]

- by ysap

- by Martin Hinshelwood

- by To Do

- by Rekha

- by Nil

- by Pinal Dave

- by Bane

- by adempewolff

- by Magnus Hoff

- by jamiet

- by pgoutin

- by Venkata Srikanth

- by Jane Story

- by Elton Stoneman

- by darcy

- by Zaki

- by imran_ku07

- by Magnus Hoff

- by Matt H

- by johndoucette

- by RaidPinata

- by Don Quixote

- by ryanzec

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88 | Next Page >