Search Results

Search found 20841 results on 834 pages for 'internet radio'.

Page 81/834 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • local .pac-file URL format that works with IE and Safari (Windows)?

    - by legr3c
    Say I want to use a proxy auto-config file that is stored at C:\proxy.pac. To make Internet Explorer use this configuration I have to specify the pac-file in the LAN settings in the following way: file://C:/proxy.pac But Safari, that uses the same proxy settings, will ignore it in this case. To make Safari use the pac-file I have to reference it as file:///C:/proxy.pac (3 slashes at the beginning) which, according to Wikipedia is the correct format. But this way Internet Explorer will ignore it. Opera and Chrome, that also use the same proxy settings, are fine with both ways but is there another option that will work with Safari and Internet Explorer at the same time?

    Read the article

  • Can't get wireless working after installing ubuntu 12.10 on acer aspire 5560-7414

    - by markdel
    I have been struggling all day trying different solutions from different posts on how to get my wifi working but none have worked. Any help would be greatly appreciated. Below are some wireless preferences to help find the problem. mark@mark-Aspire-5560:~$ sudo rfkill list all [sudo] password for mark: 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 1: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 10 serial: 20:6a:8a:7f:63:82 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=full firmware=sb ip=158.65.194.244 latency=0 link=yes multicast=yes port=twisted pair speed=10Mbit/s resources: irq:16 memory:f0000000-f000ffff memory:f0010000-f001ffff memory:f0050000-f00507ff *-network description: Wireless interface product: BCM43227 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 00 serial: 08:ed:b9:01:e0:8b width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.112 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f0103fff

    Read the article

  • HTTP, HTTPS and FTP is not working but SMTP and IMAP are working.

    - by nWorx
    Yesterday on a computer of a friend a strange thing happened. after booting the ports fo http, https and ftp are closed but e-mail is still working. in the control panel the windows firewall seems active even if he tries to deactivate it. I have a suspision that it is the faul of norton internet security 2010, we have tried to uninstall it, but the uninstallation did not work. when using the removal tool from symantec it just goes to 23% and then it crashes. the process ccSvcHst.exe is still running. How can I safely remove the rest of Norton Internet Security? Edit: Norton Internet Security 2010 is sucesfully removed, but still no connectivity...

    Read the article

  • WiFi can't connect after suspend

    - by CyberOPS
    I've had this problem since Ubuntu 11.10 (my first install) but I was able to get around this issue with this answer. After I installed Ubuntu 12.04.1 I tried to use the same fix as before but I couldn't get it to work. I've also tried a couple other different fixes I found around the web but they didn't work. Basically here's what happens: I can see all the networks in my area. When I try to connect to one of them it never connects, it keeps disconnecting. After a little bit it asks for the password again but its already filled in correctly. If I hit okay it will do the exact same thing again. So does anyone know how I can get this fixed? INFO: Computer: HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Network Card: Intel® Centrino® Wireless-N 1000 OS: Ubuntu 12.04.1 (x64) dual booting with Windows 7 (x64) (*Not using Wubi*) Wireless Card Driver: iwlwifi UPDATE: I was about to reinstall with the DVD I made with the ISO from the official source but discovered the same issue happens on the disc's Ubuntu preview feature. I still was unable to fix it as before. I also tried the Xubuntu demo, and the same. Re installing the driver hasn't worked either.

    Read the article

  • IE issues with my Website (Help me fix my CSS)

    - by cam77
    I'm struggling geting my website to test fully positive in IE, the following problems keep arising, only in IE; My '#grey box' div displaying 200px to the left out of place, and it seems to move with the adjustment of the IE window size, does this in no other browsers, just IE. It creates this unnecessary horizontal scroll. I have the width set to pretty large, but have "overflow: hidden" and again, works fine across except for IE. On a few of my pages, the footer is somewhat cropped and out of place. My biggest concern is the particular page's CSS, pasted below. #container { width : 1265px; height : 920px; background-color : #addceb; overflow : hidden; padding : 0; } #logo { font-size : 38px; height : 167px; width : 427px; margin-left : 435px; padding-top : 20px; margin-bottom : -10px; margin-top: 10px; border : none; } #menunav { width : 100%; background-image : url(../imagesnew/menunav.png); background-repeat : repeat-x; height : 40px; text-align : center; font-size : 14px; font-family : Palatino Linotype, Book Antiqua, Palatino, FreeSerif, serif; overflow : auto; } #menunav ul { list-style-type : none; background-image : url(); height : 40px; width : 800px; margin : auto; } #menunav ul a { background-image : url(); background-repeat : no-repeat; background-position : right; padding-right : 32px; padding-left : 15px; display : block; line-height : 30px; text-decoration : none; font-size : 14px; } #mainbox { position : relative; background-image : url(../premiumslideimgs/premiumbox.png); background-repeat : no-repeat; width : 900px; height : 800px; margin-left : 16%; top : 22px; padding-top : 5px; overflow : hidden; } #simplegallery1 { position : absolute; left : 50%; width : 800px; height : 800px; margin-top : 44px; margin-bottom: -44px; margin-bottom : 240px; margin-left : -397px; background-color : #a1bbfe; padding-top : 0; } #textbelowbox { position : absolute; width : 830px; height : 45px; margin-left : 209px; margin-bottom : 240px; margin-top : -240px; overflow : hidden; } #footer { background-image : url(../imagesnew/footerimg.png); background-repeat : no-repeat; background-position : right; height : 275px; margin-top : -285px; } a:hover { color : #addceb; } #right { float : right; margin-top : 3px; } #left { float : left; margin-left : 30px; } body { font-family : Palatino Linotype, Book Antiqua, Palatino, FreeSerif, serif; background-color : #addceb; margin : 0; padding : 0; } #textabovebox { width : 920px; position : absolute; margin-left : 228px; margin-bottom : 80px; margin-top : 38px; z-index : 2000; font-family : Palatino Linotype, Book Antiqua, Palatino, FreeSerif, serif; } a.submenu:hover { color : #333; font-weight : bolder; } #dialog { font-size : 12px; } #greybox { position : absolute; width : 275px; height : 465px; margin-left : 715px; margin-top : 80px; overflow : hidden; z-index : 2000; } ul { background-image : url(); height : 40px; width : 800px; margin : auto; } ul a { background-image : url(); background-repeat : no-repeat; background-position : right; padding-right : 32px; padding-left : 15px; display : block; line-height : 30px; text-decoration : none; font-size : 14px; } li { float : left; } a:link { color : #ffffff; text-decoration : none; } a:visited { color : #ffffff; text-decoration : none; } a:active { color : #ffffff; text-decoration : none; } a:hover { color : #addceb; } #right { float : right; margin-top : 3px; } #left { float : left; margin-left : 30px; } #text { float : left; margin-left : 30px; } body { font-family : Palatino Linotype, Book Antiqua, Palatino, FreeSerif, serif; padding : 0; margin : 0; } body { background-color : #addceb; } a.submenu:link { color : #333333; } a.submenu:active { color : #333333; } a.submenu:visited { color : #333333; } a.submenu:hover { color : #333333; font-weight : bolder; } { margin: 0; padding: 0; } Please help if you can, thanks a lot.

    Read the article

  • Proxy authentication box not showing (sometimes)

    - by zerologiko
    I'm behind a proxy that require authentication by means of user/pass. I'm using Ubuntu 11.04, I think the proxy is "Squid". Usually everything works fine, that means that the browser shows me the window to insert proxy user/pass and I can navigate. The problem: Sometimes the browser refuse to show the authentication windows and if I wait enough it gives me an error like: Errore 130 (net::ERR_PROXY_CONNECTION_FAILED) Even if I restart, disconnect, the situation doesn't change. BUT on Windows the network (and the proxy) works.. So, bottomline what I know is: the network is working (though only on Windows) the Ubuntu configuration is ok (because i can navigate most days) The problems resolves itself in a few hours but I don't understand why. Some hints? Thanks in advance! Andrea

    Read the article

  • Browser support for internal corporate tools

    - by adam
    We are on the verge of a conversion. For years, our company supported only IE for its internal (intranet) home-built tools. Since a few of our users are still on XP, which means IE only goes up to 8... a heavily JS / jQuery site wont even load! We have been in the process of converting to use Chrome instead, to make use of its javascript performance. But, it has now been suggested that we support all common browsers... internally for these tools. Which means more development time to scale-back some of these new applications, more time to test in all browsers, and we are already under staffed. Are there any good informational sites/posts out there, that already make this argument?

    Read the article

  • Can Adwords be cancelled by Google because of improper IE6 site rendering

    - by user745434
    A client just got a notice from Google saying that their Adwords campaign has been put on hold because the site is: Improperly rendering or Under constructions or Needs a special program to run Now the site is improperly rendering on IE6. On everything else, including IE7+ it's fine. If this is the issue, would putting up a "Looks like you're using an older browser" message instead of the site for IE6 be a solution? Or must the site look good in IE6 for the Adwords campaign to continue?

    Read the article

  • IE 9 home page is hijacked by avg

    - by horace
    I definitely know how to change the home page in Internet Explorer (Tools -> Options -> General). The problem is, no matter what I put there, it never changes. Stop/restart Internet Explorer and the old home page is back. I did some research to see if there is a registry key that I could tweak to get the home page to set properly. I changed the start page registry key and refreshed the view and the start page key (without even restarting regedit) was reset back to its original value. Now I'm a little concerned. Maybe there's some virus I can't detect on my system? Internet Explorer 9.0.8112.16421 Windows 7 Pro SP 1 x64

    Read the article

  • Help with Dial Up

    - by iSeth
    I am trying to set up a computer for my friend that has dial up. The problem is nothing I try can detect the modem. GnomePPP can't find it and I can't figure Kppp out. I've been looking all over the net on my ethernet trying to find an answer but I keep getting routed back here. I have also tried using scanModem and it finds something like Conexant Systems, Inc. HCF 56k Data/Fax/Voice Modem but the rest of it is really confusing. I've also tried this but I'm not very terminal savvy and it didn't work. It seems like I have to compile a driver but I don't know which one or how to do it. I have also tried multiple modems. Any help would be appreciated. Thanks EDIT: scanModem thinks the modem is disabled on startup. EDIT: I reinstalled Ubuntu but the problem persists.

    Read the article

  • How to make ip Address static (eth0)

    - by Jordan Angelucci
    I'm having a really hard time configuring ubuntu 13.04 to have a static ip address. I have tried multiple solutions but everytime I reboot (can't do the network reset command because ubuntu freezes) I end up with no connection. Here is what I get when i type ifconfig into the terminal: eth0 Link encap:Ethernet HWaddr 10:bf:48:bc:07:cb inet addr:192.168.0.8 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::12bf:48ff:febc:7cb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1763067 errors:0 dropped:0 overruns:0 frame:0 TX packets:1024326 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2284491220 (2.2 GB) TX bytes:136809317 (136.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1840 errors:0 dropped:0 overruns:0 frame:0 TX packets:1840 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:185688 (185.6 KB) TX bytes:185688 (185.6 KB) I have also tried this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.160 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 dns-nameservers 24.222.0.94 dns-nameservers 24.222.0.95 If anyone could help me it would be very much appreciated.

    Read the article

  • CSS Issue in IE Only [closed]

    - by kel
    I can't for the life of me figure out why specifying a image as a background for a link that it would look like this for IE and look the way it should for every other browser. The top image is IE and the bottom is every other browser. Look at the text, it is supposed to have a transparent PNG behind it and I set it to repeat. Here is the URL if you want to see the code: http://flesheatingzipper.com

    Read the article

  • Linking two networks that have a common device

    - by Serban Razvan
    I recently bought a Samsung Smart TV having in mind to connect it to the Internet. Because my router is very far from it and not wanting to buy an expensive wireless for the TV, I created a homemade solution. I have the laptop (an smartphone and the PC) connected to the router which is connected to the internet. I shared the laptop's wireless connection to the ethernet port which I connected to the TV. So far, the TV is connected to the internet, but is there any way to make him part of the router's network instead of the 2 devices network (the laptop and the TV)?

    Read the article

  • Why Firefox caching work will reset in version 3 but version 16 don't?

    - by huahsin68
    I am developing a web application and have the app deployed into Tomcat server. Tested on IE and Firefox and are working fine. Meaning when I close the browser and reopen the app, the data will be reset. When deploy to Websphere, the data is reset only in IE but Firefox don't. Meaning Firefox will cache the old data. I did try to clear the cache in FF but still failed. I did a test in FF3 and FF16, FF3 will reset the value but FF16 doesn't, I am just so curious why this could happened? Now I don't know whether this is my code problem or is actually the FF caching problem. Any clue on this?

    Read the article

  • How to interconnect laptop, PC, Android & Symbiam phones with WiFi?

    - by noquery
    What I have Level One wifi Router hub Laptop with Windows 7 (wifi enabled) Desktop PC with Windows 7 (with no wifi, maybe LAN cables can help) 2 android & 1 Symbian Phones each wifi enabled. LAN Cables Hathway Internet connection which allows only 1 login to access internet What I want Is it possible to access internet on PC, laptop, mobiles at the same time with only one connection? Since I don't know even A of networking so please suggest some software which require minimum cofiguration. Let me know if any other hardware I require.

    Read the article

  • Unable to install openjdk7 from terminal [closed]

    - by Adil
    Possible Duplicate: How can I fix a 404 Error using a PPA? Update manager generates 404 error while attempting update. Will not update When i tried to install jdk from following command: sudo apt-get install openjdk-7-jdk Following error was displayed: Err http://us.archive.ubuntu.com/ubuntu/ precise-updates/universe openjdk-7-jre-lib all 7u7-2.3.2-1ubuntu0.12.04.1 404 Not Found [IP: 91.189.91.15 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

    Read the article

  • Windows 7 - ICS - Xbox360

    - by Hailwood
    I am trying to connect my xbox360 to the internet through ICS using my laptop. I have done this a few days ago using the exact same hardware(so no hardware problems) The laptop can browse the internet. The laptop gets its settings though DHCP. I have enabled ICS on the Wireless connection (where the internet is coming from) I have set the xbox and the Wired connection on the laptop to obtain settings automatically. The issue is that the Wired connection only shows 'Unidentified Network'. What could i be doing wrong?

    Read the article

  • Compared to Firefox 4 and Google Chrome 10, what can't IE9 do?

    - by ClosureCowboy
    If a website works in Firefox 4 and in Google Chrome 10, what could potentially cause that website not to work (broken layout or broken JavaScript) in IE9? What limitations and differences does IE9 have, aside from vendor-specific stylesheet rules? Yes, that is a painfully vague question — that's because I am not asking this question from the perspective of someone with a specific problem! I'm asking this question from the perspective of someone with a working website who does not have access to IE9.

    Read the article

  • ubuntu 11.10 can't find wireless after waking from sleep

    - by Colleen
    I've tried a lot of proposed solutions, most of them adding files to /etc/pm/config.d, as well as WiFi stops working after waking from suspend and nothing has worked. hardware info: [colleen@colleen-HP ~]$ sudo lshw -C network [sudo] password for colleen: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 2c:27:d7:b1:ea:67 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:4000(size=256) memory:c1404000-c1404fff memory:c1400000-c1403fff *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:0d:00.0 logical name: wlan0 version: 00 serial: 8c:a9:82:99:48:8c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-21-generic-pae firmware=39.31.5.1 build 35138 ip=192.168.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:48 memory:c5500000-c5501fff Is anyone else still having this problem? The two solutions I haven't tried are installing wicd and upgrading because I've heard both are kind of unstable/buggy and wicd frankly scares me.

    Read the article

  • A tinkered PC resets its nameserver (resolv.conf) on each boot

    - by aitchnyu
    The Ubuntu 11.10 PC resets resolv.conf on each boot, only with a comment remaining. How do I fix this by setting the persistent storage? It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. Content of interfaces file: root@technovia-3:~/dev/spectrum/spectrum# cat /etc/network/interfaces auto lo iface lo inet loopback

    Read the article

  • Can i connect my modem's ethernet and usb slot to two computers simultaneously??

    - by Rajasekar
    I have NETGEAR BROADBAND MODEM. I had a desktop and laptop. I had connected internet to dekstop by using Ehternet slot on my modem to my ethernet slot on my Desktop. I need internet connection on my Laptop too. There is another slot in modem which can be connect using USB cable. Whether i can connect the laptop with that USB slot in my modem and use both the computer's internet? whether it will work??

    Read the article

  • wifi works only after connecting through wire

    - by orustam
    I have fresh installed ubuntu 12.04. it is my first ubuntu installation and i'm a bit confused about the network connection. Wifi shows up and connects(at least it shows that the connection is established), but i can't open any pages, i've tried to ping some sites and it fails either. If i try to connect through a wire it works, what is interesting to me is that after i used my wire connection i can use my wifi properly without a wire pluged in. i think it probably has to do with my settings? I tried to find a solution but can figure it out on my own. My Proxy set to none(have applied it system wide) Please help me if you have any clue:)

    Read the article

  • Can't connect nonlocally after 12.10 upgrade

    - by user101815
    I've just upgraded one of my systems from 12.04 to 12.10. Now I can't connect on that system beyond my local network. Connections within the local network seem to work fine, and I can make nonlocal connections from other machines (like the one I'm asking this question from). I suspect that some routing information has been messed up, but I don't know where to look for it. It's not a nameserver problem -- pinging outside sites by their IP addresses doesn't work either. I have another laptop next to this one, also running Kubuntu 12.10. On the one that can't connect, arp produces no output. On the other one, it produces 192.168.0.1 ether 00:23:69:fa:ce:ae C wlan0 On the working machine, the output of netstat starts with some tcp entries. On the nonworking one, those entries are absent. I asked this question on the Ubuntu forum but haven't gotten any answers there. One further complication: since the troublesome machine has no outside connection, it's extremely difficult to download anything to it. For what it's worth, "ping 8.8.8.8" produces "connect: Network is unreachable". Update: after a lot of fiddling, I have my external world back. I don't know what the key action was, but the first indication of progress was that "ping 8.8.8.8" worked. At that point I still didn't have a working nameserver, so external URLs didn't work. But I did this (based on an online post, of course): sudo dpkg-reconfigure resolvconf and answered Yes to all prompts. That did the trick!! Apparently my problem was unique, or close to it, since I couldn't find any online references to it: local net working, remote net not working, including explicit IP addresses. So I suppose that if no one else has this problem, no one cares about the solution!!

    Read the article

  • Best language on Linux to replace manual tasks that use SSH/Telnet? [on hold]

    - by Calab
    I've been tasked to create and maintain a web browser based interface to replace several of the manual tasks that we perform now. I currently have a "shakey" but working program written in Perl (2779 lines) that uses basic Expect coding, but it has some limitations that require a great deal of coding to get around. Because of this I am going to do a complete rewrite and want to do it "right" this time. My question is this... What would be the best language to use to create a web based interface to perform SSH/Telnet tasks that we would normally do manually? Keep in mind the following requirements: Runs on a CentOS Linux system v5.10 Http will be served by Apache2 This is an INTRANET site and only accessible within our organization. User load will be light. No more that 5 users accessing it at one time. perl 5.8.8, php 5.3.3, python 2.7.2 are available... Not sure what other languages to check for, or what modules might be installed in each language. The web interface will need to provide progress indicators and text output produced by the remote connection, in real time as it is generated. If we are running our process on multiple hosts, they should be in individual threads so that they can run side by side, not sequentially. I want the ability to "trap" on specific text generated by the remote host and display an alert to the user - such as when the remote host generates an error message. I would like to avoid as much client side scripting (javascript/vbscript) as I can. Most users will be on Windows PC's using Chrome or IE as a browser. Users will be downloading the resulting output so they can process it as they see fit. I currently have no experience with "Ajax" or the like. Most of my coding experience is old 6809 assembly, Visual Basic 6, and whatever I can cut/paste from online examples in various languages (hence my "shaky" Perl program) My coding environment is Eclipse for remote code editing, but I prefer stuff like UltraEdit if I can get a decent syntax file for the language I'm using. I do have su access on the server, but I'm not the only one using this server so I can't just upgrade/install blindly as I might impact other software currently running on the machine. One reason that I'm asking here, instead of searching (which I did) is that most replies were, "use language 'xyz', but you need to use an external SSH connection" - like I'm using Expect in my Perl script. Most also did not agree on what language that 'xyz' should be. ...so, after this long posting, can someone offer some advice?

    Read the article

  • Wifi very slow on Ubuntu 12.04 but not on Win7, need help

    - by user84504
    I have an enormous problem: I've a Sony Vaio VGN-NR21S with win7 and Ubuntu 12.04 in dual boot. With Windows everything is fine (except that is windows) but with Ubuntu the wireless connection is awfully slow, basically unusable. I've already search for similar discussion but the solution proposed didn't worked. I've noticed this issue also in live mode both with ubuntu and linux mint. I've installed Ubuntu onto an Acer that shows the same problem when connected via wifi to my router, so I think that maybe the issue is about compatibility with my home router. I really need help, I don't want unistall ubuntu! Please tell me which output u need to help me, thanks.

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >