Search Results

Search found 2488 results on 100 pages for 'listen'.

Page 81/100 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • Configure Windows firewall to prevent an application from listening on a specific port [closed]

    - by U-D13
    The issue: there are many applications struggling to listen on port 80 (Skype, Teamviewer et al.), and to many of them that even is not essential (in the sense that you can have a httpd running and blocking the http port, and the other application won't even squeak about being unable to open the port). What makes things worse, some of the apps are... Well, I suppose, that it's okay that the mentally impaired are being integrated in the society by giving them a job to do, but... Programming requires some intellectual effort, in my humble opinion... What I mean is that there is no way to configure the app not to use specific ports (that's what you get for using proprietary software) - you can either add it to windows firewall exceptions (and succumb to undesired port opening behavior) or not (and risk losing most - if not all - of the functionality). Technically, it is not impossible for the firewall to deny an application opening an incoming port even if the application is in the exception list. And if this functionality is built into the Windows firewall somewhere, there should be a way to activate it. So, what I want to know is: whether there exists such an option, and if it does how to activate it.

    Read the article

  • Threads, Sockets, and Designing Low-Latency, High Concurrency Servers

    - by lazyconfabulator
    I've been thinking a lot lately about low-latency, high concurrency servers. Specifically, http servers. http servers (fast ones, anyway) can serve thousands of users simultaneously, with very little latency. So how do they do it? As near as I can tell, they all use events. Cherokee and Lighttpd use libevent. Nginx uses it's own event library performing much the same function of libevent, that is, picking a platform optimal strategy for polling events (like kqueue on *bsd, epoll on linux, /dev/poll on Solaris, etc). They all also seem to employ a strategy of multiprocess or multithread once the connection is made - using worker threads to handle the more cpu intensive tasks while another thread continues to listen and handle connections (via events). This is the extent of my understanding and ability to grok the thousand line sources of these applications. What I really want are finer details about how this all works. In examples of using events I've seen (and written) the events are handling both input and output. To this end, do the workers employ some sort of input/output queue to the event handling thread? Or are these worker threads handling their own input and output? I imagine a fixed amount of worker threads are spawned, and connections are lined up and served on demand, but how does the event thread feed these connections to the workers? I've read about FIFO queues and circular buffers, but I've yet to see any implementations to work from. Are there any? Do any use compare-and-swap instructions to avoid locking or is locking less detrimental to event polling than I think? Or have I misread the design entirely? Ultimately, I'd like to take enough away to improve some of my own event-driven network services. Bonus points to anyone providing solid implementation details (especially for stuff like low-latency queues) in C, as that's the language my network services are written in.

    Read the article

  • Several xml errors using Facebook JS SDK with xhtml strict

    - by Landitus
    I'm trying to set up some like buttons to a project. These buttons live inside a jquery slideshow with Aino's Galleria and let you "Like" each different slide. I'm using an xHTML strict document and while in Firefox (and Firebug) everything seems ok, but in webkit inspector I get this: XML self-closing tag syntax used on <fb:like>. The tag will not be closed. [The HTML that caused this error was generated by a script.] XML self-closing tag syntax used on <fb:like>. The tag will not be closed. I get one of these every slide, so there are 28 errors. Looking into it, found some seem to enclose the fb:like into something like this: <script type="text/javascript"> //<![CDATA[ document.write('<fb:like href="<?php echo "http://www.site/image-".$image_id ;?>" width="260" height="80" show_faces="false" />'); //]]> </script> The above, still works in Firefox, but not in Safari. The inspector says: 26 XFBML tags failed to render in 30000ms. Moreover, for the Facebook like buttons to work with the Galleria Jquery plugin, I have a custom function that reloads only the facebook like button concerning the actual slide which appears briefly upon loading the slide: [...] extend: function(options) { // listen to when an image is shown this.bind(Galleria.IMAGE, function(e) { number = e.index + 1; tag = $('.galleria-info-description .info-box-'+number).find('.btn_fb'); $(tag).each(function() { FB.XFBML.parse( this ); }); }); } This thing is getting more complex and really don't know who is causing the problem! Hope somebody can help or ask the right questions!

    Read the article

  • Using CallExternalMethodActivity/HandleExternalEventActivity in StateMachine

    - by AngrySpade
    I'm attempting to make a StateMachine execute some database action between states. So I have a "starting" state that uses CallExternalMethodActivity to call a "BeginExecuteNonQuery" function on an class decorated with ExternalDataExchangeAttribute. After that it uses a SetStateActivity to change to an "ending" state. The "ending" state uses a HandleExternalEventActivity to listen to a "EndExecuteNonQuery" event. I can step through the local service, into the "BeginExecuteNonQuery" function. The problem is that the "EndExecuteNonQuery" is null. public class FailoverWorkflowController : IFailoverWorkflowController { private readonly WorkflowRuntime workflowRuntime; private readonly FailoverWorkflowControlService failoverWorkflowControlService; private readonly DatabaseControlService databaseControlService; public FailoverWorkflowController() { workflowRuntime = new WorkflowRuntime(); workflowRuntime.WorkflowCompleted += workflowRuntime_WorkflowCompleted; workflowRuntime.WorkflowTerminated += workflowRuntime_WorkflowTerminated; ExternalDataExchangeService dataExchangeService = new ExternalDataExchangeService(); workflowRuntime.AddService(dataExchangeService); databaseControlService = new DatabaseControlService(); workflowRuntime.AddService(databaseControlService); workflowRuntime.StartRuntime(); } ... } ... public void BeginExecuteNonQuery(string command) { Guid workflowInstanceID = WorkflowEnvironment.WorkflowInstanceId; ThreadPool.QueueUserWorkItem(delegate(object state) { try { int result = ExecuteNonQuery((string)state); EndExecuteNonQuery(null, new ExecuteNonQueryResultEventArgs(workflowInstanceID, result)); } catch (Exception exception) { EndExecuteNonQuery(null, new ExecuteNonQueryResultEventArgs(workflowInstanceID, exception)); } }, command); } What am I doing wrong with my implementation? -Stan

    Read the article

  • C# ErrorProvider Want to know if any are Active

    - by RcK
    I want to know if any ErrorProvider are active in my form. being able to find this out might help reduce my code.. I did find this thing here Counting ErrorProvider but incase someone knows a better way... so here goes. Ok so basically I have a WinForm which has many TextBoxes Now when user enters values I use Validating to perform validation and if it does not match Regex I set the ErrorProvider ON for that Control.. similarly if the user changes the value to a acceptable one I switch ErrorProvider OFF for that Control.. but when SAVE is clicked i have to do another check anyways incase the user did not listen to me and change the thing like he was supposed to and still clicked SAVE.. I dont want the thing crashing.. soo mm is there like a thing where I could say if ErrorProviders is not active then proceed with save else message box saying change it. [ANOTHER QUESTION] Umm When Validating it only Validates when the Control loses Focus... I kinda of want it to do validation when user stops typing.. I hope you get what I mean Like Email Address(textbox) when user is typing his/her name in I [DON'T] want it to do validation yet, but when user has finished entering is waiting for ErrorProvider to disappear(But it doesn't coz it only does that when control loses focus) 2 odd seconds after typing can i make the validation take place?

    Read the article

  • Problem installing mod_jk on Ubuntu karmic apache httpd 2.2.12 and tomcat 6

    - by Deny Prasetyo
    I have a problem when configuring mod_jk on ubuntu i use apache httpd 2.2.12 and tomcat 6 I installed apache httpd and lib mod_jk from synaptic and use default configuration. Here my mod_jk.conf Load mod_jk module Update this path to match your modules location LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so Where to find workers.properties Update this path to match your conf directory location JkWorkersFile /etc/apache2/workers.properties Where to put jk logs Update this path to match your logs directory location JkLogFile /etc/apache2/logs/mod_jk.log Set the jk log level [debug/error/info] JkLogLevel info Select the log format JkLogStampFormat "[%a %b %d %H:%M:%S %Y]" JkOptions indicate to send SSL KEY SIZE, JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories JkRequestLogFormat set the request format JkRequestLogFormat "%w %V %T" Send everything for context /ws to worker ajp13 JkMount /themark ajp13 JkMount /themark/* ajp13 Send everything for context /jsp-examples to worker ajp13 JkMount /static ajp13 JkMount /static/* ajp13 Send everything for context /servelts-examples to worker ajp13 JkMount /servlets-examples ajp13 JkMount /servlets-examples/* ajp13 and this my workers.properties Define 1 real worker named ajp13 worker.list=ajp13 Set properties for worker named ajp13 to use ajp13 protocol, and run on port 8009 worker.ajp13.type=ajp13 worker.ajp13.host=localhost worker.ajp13.port=8009 worker.ajp13.lbfactor=50 worker.ajp13.cachesize=10 worker.ajp13.cache_timeout=600 worker.ajp13.socket_keepalive=1 worker.ajp13.socket_timeout=300 when i start apache httpd and tomcat 6. it seem that mod_jk load successfully and tomcat 6 recognized the ajp connector. here my tomcat 6 log INFO: Starting Coyote HTTP/1.1 on http-8080 Mar 29, 2010 11:48:34 AM org.apache.jk.common.ChannelSocket init INFO: JK: ajp13 listening on /0.0.0.0:8009 Mar 29, 2010 11:48:34 AM org.apache.jk.server.JkMain start INFO: Jk running ID=0 time=0/16 config=null here my mod_jk.log [Mon Mar 29 11:06:53 2010][6688:3499775792] [info] init_jk::mod_jk.c (2830): mod_jk/1.2.26 initialized [Mon Mar 29 11:16:59 2010][18277:1983043376] [info] init_jk::mod_jk.c (2830): mod_jk/1.2.26 initialized [Mon Mar 29 11:16:59 2010][18278:1983043376] [info] init_jk::mod_jk.c (2830): mod_jk/1.2.26 initialized but when i access http://localhost/themark it won't work. it seems that apache httpd can load the mod_jk module but it can listen the ajp. is there somebody ever had same problem? nb: i use the same config in windows using xampplite and it works well

    Read the article

  • Setting up ehcache replication - what multicast settings do I need?

    - by Darren Greaves
    I am trying to set up ehcache replication as documented here: http://ehcache.sourceforge.net/EhcacheUserGuide.html#id.s22.2 This is on a Windows machine but will ultimately run on Solaris in production. The instructions say to set up a provider as follows: <cacheManagerPeerProviderFactory class="net.sf.ehcache.distribution.RMICacheManagerPeerProviderFactory" properties="peerDiscovery=automatic, multicastGroupAddress=230.0.0.1, multicastGroupPort=4446, timeToLive=32"/> And a listener like this: <cacheManagerPeerListenerFactory class="net.sf.ehcache.distribution.RMICacheManagerPeerListenerFactory" properties="hostName=localhost, port=40001, socketTimeoutMillis=2000"/> My questions are: Are the multicast IP address and port arbitrary (I know the address has to live within a specific range but do they have to be specific numbers)? Do they need to be set up in some way by our system administrator (I am on an office network)? I want to test it locally so am running two separate tomcat instances with the above config. What do I need to change in each one? I know both the listeners can't listen on the same port - but what about the provider? Also, are the listener ports arbitrary too? I've tried setting it up as above but in my testing the caches don't appear to be replicated - the value added in one tomcat's cache is not present in the other cache. Is there anything I can do to debug this situation (other than packet sniffing)? Thanks in advance for any help, been tearing my hair out over this one!

    Read the article

  • My Thread Programs Block

    - by user315378
    I wrote a program that worked as a server. Knowing that "accept" was blocking the program. I wanted to launch a thread with this statement to prevent precisely that the program crashes, but this still happens. Can anybody help? Post code Thanks -(IBAction)Connetti{ if(switchConnessione.on){ int port = [fieldPort.text intValue]; labelStatus.text = [[NSString alloc] initWithFormat:@"Il Server è attivo"]; server_len = sizeof(server); server.sin_family = AF_INET; server.sin_port = htons((u_short)port); server.sin_addr.s_addr = INADDR_ANY; sd = socket (AF_INET, SOCK_STREAM, 0); bind(sd, (struct sockaddr*)&server, sizeof(server)); listen(sd, 1); [NSThread detachNewThreadSelector:@selector(startThreadAccept) toTarget:self withObject:nil]; } else { labelStatus.text = [[NSString alloc] initWithFormat:@"Server non attivo"]; switchChat.on = FALSE; switchChat.enabled = FALSE; } } -(void)startThreadAccept{ NSAutoreleasePool *pool = [[NSAutoreleasePool alloc]init]; [self performSelectorOnMainThread:@selector(acceptConnection) withObject:nil waitUntilDone:NO]; [pool release]; } -(void)acceptConnection{ new_sd = accept(sd, (struct sockaddr*)&server, &server_len); labelStatus.text = [[NSString alloc] initWithFormat:@"Ho accettato una connessione:%d", new_sd]; switchChat.enabled = TRUE; }

    Read the article

  • Need events to execute on timer events, metronome precision.

    - by user295734
    I setup a timer to call an event in my application. The problme is the event execution is being skewed by other windows operations. Ex. openning and window, loading a webpage. I need the event to excute exactly on time, every time. When i first set up the app, used a sound file, like a metronome to listen to the even firing, in a steady state, its firing right on, but as soon do something in the windows environment, the sound fires slower, then sort of sppeds up a bit to catch up. So i added a logging method to the event to ctahc the timer ticks. From that data, it appears that the timer is not being affected by the windows app, but my application event calls are being affected. I figured this out by checking the datetime.now in the event, and if i set it to 250 milliseconds, which is 4 clicks per second. You get data something like below. (sec):(ms) 1:000 1:250 1:500 1:750 2:000 2:250 2:500 2:750 3:000 3:250 3:500 3:750 (lets say i execute some windows event)(time will skew) 4:122 4:388 4:600 4:876 (stop doing what i was doing in windows) (going to shorten the data for simplicit, my list was 30sec long) 5:124 5:268 5:500 5:750 (you would se the time go back the same milliseconds it was at the begining) 6:000 6:250 6:500 6:750 7:000 7:250 7:500 7:750 So i'm thinking the timer continues to fire on the same millisecond every time, but its the event that is being skewed to fire off time by other windows operations. Its not a huge skew, but for what i need to accomplish, its unacceptable. Is there anyhting i can do in .NET, hoping to use XAML/WPF application, thats will correct the skewing of events? thx.

    Read the article

  • Utilizing Windows Handles without a forum.

    - by Scott Chamberlain
    I have a program that needs to sit in the background and when a user connects to a RDP session it will do some stuff then launch a program. when the program is closed it will do some housekeeping and logoff the session. The current way I am doing it is like this I have the terminal server launch this application. I have it set as a windows forms application and my code is this public static void Main() { //Do some setup work Process proc = new Process(); //setup the process proc.Start(); proc.WaitForExit(); //Do some housecleaning NativeMethods.ExitWindowsEx(0, 0); } I really like this because there is no item in the taskbar and there is nothing showing up in alt-tab. However to do this I gave up access to functions like void WndProc(ref Message m) So Now I can't listen to windows messages (Like WTS_REMOTE_DISCONNECT or WTS_SESSION_LOGOFF) and do not have a handle to use for for bool WTSRegisterSessionNotification(IntPtr hWnd, int dwFlags); I would like my code to be more robust so it will do the housecleaning if the user logs off or disconnects from the session before he closes the program. Any reccomendations on how I can have my cake and eat it too?

    Read the article

  • Debugging in VS 2008 locks a stored procedure

    - by larryq
    Hi everyone, I've got a strange one here. I have a .Net executable that, under the hood, calls a few stored procedures. For whatever reason, one of the stored procs hangs when I'm debugging. If I run the executable outside of visual studio things go fine, including this stored proc. It's when I'm debugging that this hangs, and it really hangs. If I stop the debugging session the IDE freezes and I have to kill it via taskmanager. I know which stored procedure has the trouble, as well as the actual statement within it that's the problem. It's calling an update statement that doesn't stand out as particularly special. I can run the identical statement (and the stored procedure itself) from SQL management studio wtih no problem. And, as I mentioned, the exe runs just fine outside the debugger. If I use the SQL activity monitor to see why things are hanging, the wait type says PREEMPTIVE_DEBUG. I'm not sure if that's helpful but if you need more info I'll try to get it to you. I've rebooted my machine (the SQL Server in question is on this box as well) and that didn't do anything, nor did rebuilding the executable. I'm scratching my head on this one and if you have any ideas what to check on next, I'm be happy to listen. Thanks!

    Read the article

  • Multiple, Simultaneous Factories and Protocols in Twisted: Same Service, Different Ports

    - by RichardCroasher
    Greetings, Forum. I'm working on a program in Python that uses Twisted to manage networking. The basis of this program is a TCP service that is to listen for connections on multiple ports. However, instead of using one Twisted factory to handle a protocol object for each port, I am trying to use a separate factory for each port. The reason for this is to force a separation among the groups of clients connecting to the different ports. Unfortunately, it appears that this architecture isn't quite working: clients that connect to one port appear to be available among all the factories (e.g., the protocol class used by each factory includes a 'self.factory.clients.append (self)' statement...instead of adding a given client to just the factory for a particular port, the client is added to all factories), and whenever I shutdown service on one port the listeners on all ports also stop. I've been working with Twisted for a short while, and fear I simply don't fully understand how its factory classes are managed. My question is: is it simply not possible to have multiple, simultaneous instances of the same factory and same protocol in use across different ports (without these instances stepping on each other's toes)?

    Read the article

  • Cascading input control is empty while accessing a Jasper Report

    - by Yogesh R
    I call a jasper report through an independent URL through which I pass one of the input controls needed to run the report. E.g. http:// localhost:8080/jasperserver/flow.html?_flowId=viewReportFlow&standAlone=true&reportUnit=xyz&ParentFolderUri=abcd&j_username=xyz&j_password=xyz&parameter1=value1& . . . As you can see in the URL, I pass the JasperServer username and password, reportUnit name and location and other mandatory parameters, along with the report input parameter, i.e., "parameter1" which can have a value like "value1". I used a mandatory, read-only and visible input control for this input value. Its value would come from the URL, showed in the box but was read-only and hence could not be changed. The report was working absolutely fine upto this point. But the tragedy began when my client rejected this idea. He wanted a completely invisible input control to my report and the input value would be passed through the URL, just like illustrated above. And then my client asked me to refer to this and made me work on cascading input controls. Recently I added a cascading input control to this report. The input control type is a single select query, which utilizes two parameters that I pass to the report through the URL. Now when the Jasper server responds to the URL with the input parameters, all the other static parameters work properly, except for the cascaded one. When I click the select box of the cascaded input, I can see the desired options for a second, and then, it just goes empty while I'm viewing the select list. But when I make the "Parameter1" input control visible, the cascading input control works! And then I turn in invisible, the cascading input control turns into a beast that does things by itself and not listen to his master. I am not able to understand why this is happening. Could anybody please provide me a solution to this?

    Read the article

  • jQuery code working in Safari and Chrome but not Firefox

    - by Chris Armstrong
    I'm got a site that has a long list of tweets, and as you scroll down the right column follows you down, showing stats on the tweets. (See it in action at http://www.grapevinegame.com . Click 'memorise', then 'skip' to get to the list page. Works in Safari and Chrome). I'm using jQuery to update the top-margin of the right column, increasing it as I scroll down. It seems to be working fine in webkit-based browsers, but doesn't budge in Firefox. Heres the code, the right column element is a div with id = "distance". // Listen for scroll function $(window).scroll(function () { // Calculating the position of the scrollbar var doc = $("body"), scrollPosition = $("body").scrollTop(), pageSize = $("body").height(), windowSize = $(window).height(), fullScroll = (pageSize) - windowSize; percentageScrolled = (scrollPosition / fullScroll); var entries = $("#whispers-list > li").length; // Set position of distance counter $('div#distance').css('margin-top', ($("#whispers-list").height()+$("#latest-whisper").height()+33)*percentageScrolled); // Update distance counter $('#distance-travelled').text(Math.round(distanceTravelled*(1-percentageScrolled))); $('#whispers-list li').each(function(index) { //highlight adjacent whispers if ($('#whispers-list li:nth-child('+(index+1)+')').offset().top >= $('#distance').offset().top && $('#whispers-list li:nth-child('+(index+1)+')').offset().top <= $('#distance').offset().top + $('#distance').height()) { // alert("yup"); $('#whispers-list li:nth-child('+(index+1)+') ul').fadeTo(1, 1); } else { $('#whispers-list li:nth-child('+(index+1)+') ul').fadeTo(1, 0.5); } }); }); Appreciate any help or advice!

    Read the article

  • Perl cron job stays running

    - by Dylan
    I'm currently using a cron job to have a Perl script that tells my Arduino to cycle my aquaponics system and all is well, except the Perl script doesn't die as intended. Here is my cron job: */15 * * * * /home/dburke/scripts/hal/bin/main.pl cycle And below is my Perl script: #!/usr/bin/perl -w # Sample Perl script to transmit number # to Arduino then listen for the Arduino # to echo it back use strict; use Device::SerialPort; use Switch; use Time::HiRes qw ( alarm ); $|++; # Set up the serial port # 19200, 81N on the USB ftdi driver my $device = '/dev/arduino0'; # Tomoc has to use a different tty for testing #$device = '/dev/ttyS0'; my $port = new Device::SerialPort ($device) or die('Unable to open connection to device');; $port->databits(8); $port->baudrate(19200); $port->parity("none"); $port->stopbits(1); my $lastChoice = ' '; my $pid = fork(); my $signalOut; my $args = shift(@ARGV); # Parent must wait for child to exit before exiting itself on CTRL+C $SIG{'INT'} = sub { waitpid($pid,0) if $pid != 0; exit(0); }; # What child process should do if($pid == 0) { # Poll to see if any data is coming in print "\nListening...\n\n"; while (1) { my $incmsg = $port->lookfor(9); # If we get data, then print it if ($incmsg) { print "\nFrom arduino: " . $incmsg . "\n\n"; } } } # What parent process should do else { if ($args eq "cycle") { my $stop = 0; sleep(1); $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; $stop = 1; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); while ($stop == 0) { sleep(2); } die "Done."; } else { sleep(1); my $choice = ' '; print "Please pick an option you'd like to use:\n"; while(1) { print " [1] Cycle [2] Relay OFF [3] Relay ON [4] Config [$lastChoice]: "; chomp($choice = <STDIN>); switch ($choice) { case /1/ { $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); $lastChoice = $choice; } case /2/ { $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2"; $lastChoice = $choice; } case /3/ { $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1"; $lastChoice = $choice; } case /4/ { print "There is no configuration available yet. Please stab the developer."; } else { print "Please select a valid option.\n\n"; } } } } } Why wouldn't it die from the statement die "Done.";? It runs fine from the command line and also interprets the 'cycle' argument fine. When it runs in cron it runs fine, however, the process never dies and while each process doesn't continue to cycle the system it does seem to be looping in some way due to the fact that it ups my system load very quickly. If you'd like more information, just ask. EDIT: I have changed to code to: #!/usr/bin/perl -w # Sample Perl script to transmit number # to Arduino then listen for the Arduino # to echo it back use strict; use Device::SerialPort; use Switch; use Time::HiRes qw ( alarm ); $|++; # Set up the serial port # 19200, 81N on the USB ftdi driver my $device = '/dev/arduino0'; # Tomoc has to use a different tty for testing #$device = '/dev/ttyS0'; my $port = new Device::SerialPort ($device) or die('Unable to open connection to device');; $port->databits(8); $port->baudrate(19200); $port->parity("none"); $port->stopbits(1); my $lastChoice = ' '; my $signalOut; my $args = shift(@ARGV); # Parent must wait for child to exit before exiting itself on CTRL+C if ($args eq "cycle") { open (LOG, '>>log.txt'); print LOG "Cycle started.\n"; my $stop = 0; sleep(2); $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; $stop = 1; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; print LOG "Alarm is being set.\n"; alarm (420); print LOG "Alarm is set.\n"; while ($stop == 0) { print LOG "In while-sleep loop.\n"; sleep(2); } print LOG "The loop has been escaped.\n"; die "Done."; print LOG "No one should ever see this."; } else { my $pid = fork(); $SIG{'INT'} = sub { waitpid($pid,0) if $pid != 0; exit(0); }; # What child process should do if($pid == 0) { # Poll to see if any data is coming in print "\nListening...\n\n"; while (1) { my $incmsg = $port->lookfor(9); # If we get data, then print it if ($incmsg) { print "\nFrom arduino: " . $incmsg . "\n\n"; } } } # What parent process should do else { sleep(1); my $choice = ' '; print "Please pick an option you'd like to use:\n"; while(1) { print " [1] Cycle [2] Relay OFF [3] Relay ON [4] Config [$lastChoice]: "; chomp($choice = <STDIN>); switch ($choice) { case /1/ { $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); $lastChoice = $choice; } case /2/ { $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2"; $lastChoice = $choice; } case /3/ { $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1"; $lastChoice = $choice; } case /4/ { print "There is no configuration available yet. Please stab the developer."; } else { print "Please select a valid option.\n\n"; } } } } }

    Read the article

  • jQuery: preventDefault() not working on input/click events?

    - by Jason
    I want to disable the default contextMenu when a user right-clicks on an input field so that I can show a custom contextMenu. Generally speaking, its pretty easy to disable the right-click menu by doing something like: $([whatever]).bind("click", function(e) { e.preventDefault(); }); And in fact, I can do this on just about every element EXCEPT for input fields in FF - anyone know why or could point me towards some documentation? Here is the relevant code I am working with, thanks guys. HTML: <script type="text/javascript"> var r = new RightClickTool(); </script> <div id="main"> <input type="text" class="listen rightClick" value="0" /> </div> JS: function RightClickTool(){ var _this = this; var _items = ".rightClick"; $(document).ready(function() { _this.init(); }); this.init = function() { _this.setListeners(); } this.setListeners = function() { $(_items).click(function(e) { var webKit = !$.browser.msie && e.button == 0; var ie = $.browser.msie && e.button == 1; if(webKit||ie) { // Left mouse...do something() } else if(e.button == 2) { e.preventDefault(); // Right mouse...do something else(); } }); } } // Ends Class

    Read the article

  • Detect NetStream events with AS3 Video Object (not component)

    - by JFOX
    I have created a FLV video player using the AS3 flash.media.Video object (not the FLV playback component) and I am trying to listen for meta events and Cue Points embedded in the FLV video but I am not receiving any when I trace the movie. The cue points are not being created dynamically, they are in the FLV video. Video embed code: // Initialize net stream nc = new NetConnection(); nc.connect (null); // Not using a media server. ns = new NetStream(nc); // Add video to stage vid = new Video(456,675); addChild (vid); // Add callback method for listening on // NetStream meta data client = new Object(); ns.client = client; client.onMetaData = this.nsMetaDataCallback; client.onCuePoint = this.onCuePoint; // Play video vid.attachNetStream ( ns ); ns.play ("flv/00_010.flv"); callback handlers in the same class as the above code: public function onCuePoint(info:Object):void { trace("cuePoint: time = " + info.time + " name = " + info.name + " type = " + info.type); if (ns) ns.pause(); } public function nsMetaDataCallback (mdata:Object):void { trace (mdata.duration); } Is there anything I am missing have wrong to capture events from my net stream?

    Read the article

  • INSERT INTO sql server error : invalid object name

    - by thormayer
    I have a problem with some statement on SQL SERVER the error I get is that I have an invalid object name 'TBL_VIDEOS' INSERT INTO TBL_VIDEOS ( TBL_VIDEOS.ID, TBL_VIDEOS.TITLE, TBL_VIDEOS.V_DESCRIPTION, TBL_VIDEOS.UPLOAD_DATE, TBL_VIDEOS.V_VIEWS, TBL_VIDEOS.USERNAME, TBL_VIDEOS.RATING, TBL_VIDEOS.V_SOURCE, TBL_VIDEOS.FLAG ) VALUES ('Z8MTRH3LmTVm', 'Why Creativity is the New Economy', 'Dr Richard Florida, one of the world&#39;s leading experts on economic competitiveness, demographic trends and cultural and technological innovation shows how developing the full human and creative capabilities of each individual, combined with institutional supports such as commercial innovation and new industry, will put us back on the path to economic and social prosperity. Listen to the podcast of the full event including audience Q&amp;A: http://www.thersa.org/events/audio-and-past-events/2012/why-creativity-is-the-new-economy Our events are made possible with the support of our Fellowship. Support us by donating or applying to become a Fellow. Donate: http://www.thersa.org/support-the-rsa Become a Fellow: http://www.thersa.org/fellowship/apply', CURRENT_TIMESTAMP, 0, 1, 0, 'http://www.youtube.com/watch?v=VPX7gowr2vE&feature=g-all-u' ,0) and I wonder what i've done wrong ? (btw, the error refer to line 1.. guess its the table name.. but it correct!

    Read the article

  • not able to register sip user on red5server, using red5phone

    - by sunil221
    I start the red5, and then i start red5phone i try to register sip user , details i provide are username = 999999 password = **** ip = asteriskserverip and i got --- Registering contact -- sip:[email protected]:5072 the right contact could be --- sip :99999@asteriskserverip this is the log: SipUserAgent - listen -> Init... Red5SIP register [SIPUser] register RegisterAgent: Registering contact <sip:[email protected]:5072> (it expires in 3600 secs) RegisterAgent: Registration failure: No response from server. [SIPUser] SIP Registration failure Timeout RegisterAgent: Failed Registration stop try. Red5SIP Client leaving app 1 Red5SIP Client closing client 35C1B495-E084-1651-0C40-559437CAC7E1 Release ports: sip port 5072 audio port 3002 Release port number:5072 Release port number:3002 [SIPUser] close1 [SIPUser] hangup [SIPUser] closeStreams RTMPUser stopStream [SIPUser] unregister RegisterAgent: Unregistering contact <sip:[email protected]:5072> SipUserAgent - hangup -> Init... SipUserAgent - closeMediaApplication -> Init... [SIPUser] provider.halt RegisterAgent: Registration failure: No response from server. [SIPUser] SIP Registration failure Timeout please let me know if i am doing anything wrong. regards Sunil

    Read the article

  • modx friendly urls nginx FPM php5.3 - friendly url's not working

    - by okdan
    Hi, Im using php5.3 on nginx 0.8.53 with FPM on Modx revolution. Im trying to get "friendly url's" to work, but all I get is 404's. In modx config, friendly url's is set to yes, friendly aliases is set to no (so it drops the suffix) My config file: server { listen 80; server_name .mydomain.net; # index index.php; root /home/mylogin/htdocs; location / { index index.php index.html; if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; } } # serve static files directly location ~* ^.+\.(jpg|jpeg|gif|css|png|js|ico)$ { root /home/mylogin/htdocs; access_log off; expires 30d; break; } } Fast CGI modx file: fastcgi_connect_timeout 60; fastcgi_send_timeout 300; fastcgi_buffers 4 32k; fastcgi_busy_buffers_size 32k; fastcgi_temp_file_write_size 32k; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_ignore_client_abort on; fastcgi_intercept_errors on; fastcgi_read_timeout 300; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param REDIRECT_STATUS 200;

    Read the article

  • Is MVVM killing silverlight development?

    - by DeanMc
    This is a question I have had rattling around in my head for some time. I had a chat with a guy the other night who told me he would not be using the navigational framework because he could not figure out how it works with MVVM. As much as I tried to explain that patterns should be taken with a pinch of salt he would not listen. My point is this, patterns are great when they solve some problem. Sometimes only part of the pattern solves a particular problem while the other parts of it cause different problems. The goal of any developer is to build a solid application using a combination of patterns know how and foresight. I feel MVVM is becoming the one pattern to rule them all. As it is not directly supported by .Net some fancy business is needed to make it work. I feel that people are missing the point of the pattern, which is loosely coupled, testable code and instead jumping through hoops and missing out on great experiences trying to follow MVVM to the letter. MVVM is great but I wish it came with a warning or disclaimer for newbies as my fear is people will shy away from silverlight development for fear of being smacked with the mvvm stick. EDIT: Can I just add as an edit, I use and agree with MVVM as a pattern I know when it is and isn't feasible in my projects. My issue is with the encompassing nature it is taking, as if it HAS to be used as part of development. It is being used as an integral feature and not a pattern, which it is.

    Read the article

  • How to perform undirected graph processing from SQL data

    - by recipriversexclusion
    I ran into the following problem in dynamically creating topics for our ActiveMQ system: I have a number of processes (M_1, ..., M_n), where n is not large, typically 5-10. Some of the processes will listen to the output of others, through a message queue; these edges are specified in an XML file, e.g. <link from="M1" to="M3"</link> <link from="M2" to="M4"</link> <link from="M3" to="M4"</link> etc. The edges are sparse, so there won't be many of them. I will parse this XML and store this information in an SQL DB, one table for nodes and another for edges. Now, I need to dynamically create strings of the form M1.exe --output_topic=T1 M2.exe --output_topic=T2 M3.exe --input_topic=T1 --output_topic=T3 M4.exe --input_topic=T2 --input_topic=T3 where the tags are sequentially generated. What is the best way to go about querying SQL to obtain these relationships? Are there any tools or other tutorials you can point me to? I've never done graps with SQL. Using SQL is imperative, because we use it for other stuff, too. Thanks!

    Read the article

  • Windows-1251 file inside UTF-8 site?

    - by Spoonk
    Hello everyone Masters Of Web Delevopment :) I have a piece of PHP script that fetches last 10 played songs from my winamp. This script is inside file (lets call it "lastplayed.php") which is included in my site with php include function inside a "div". My site is on UTF-8 encoding. The problem is that some songs titles are in Windows-1251 encoding. And in my site they displays like "??????"... Is there any known way to tell to this div with included "lastplayed.php" in it, to be with windows-1251 encoding? Or any other suggestions? P.S: The file with fetching script a.k.a. "lastplayed.php", is converted to UTF-8. But if it is ANCII it's the same result. I try to put and meta tag with windows-1251 between head tag but nothing happens again. P.P.S: Script that fetches the Winamp's data (lastplayed.php): <?php /****** * You may use and/or modify this script as long as you: * 1. Keep my name & webpage mentioned * 2. Don't use it for commercial purposes * * If you want to use this script without complying to the rules above, please contact me first at: [email protected] * * Author: Martijn Korse * Website: http://devshed.excudo.net * * Date: 08-05-2006 ***/ /** * version 2.0 */ class Radio { var $fields = array(); var $fieldsDefaults = array("Server Status", "Stream Status", "Listener Peak", "Average Listen Time", "Stream Title", "Content Type", "Stream Genre", "Stream URL", "Current Song"); var $very_first_str; var $domain, $port, $path; var $errno, $errstr; var $trackLists = array(); var $isShoutcast; var $nonShoutcastData = array( "Server Status" => "n/a", "Stream Status" => "n/a", "Listener Peak" => "n/a", "Average Listen Time" => "n/a", "Stream Title" => "n/a", "Content Type" => "n/a", "Stream Genre" => "n/a", "Stream URL" => "n/a", "Stream AIM" => "n/a", "Stream IRC" => "n/a", "Current Song" => "n/a" ); var $altServer = False; function Radio($url) { $parsed_url = parse_url($url); $this->domain = isset($parsed_url['host']) ? $parsed_url['host'] : ""; $this->port = !isset($parsed_url['port']) || empty($parsed_url['port']) ? "80" : $parsed_url['port']; $this->path = empty($parsed_url['path']) ? "/" : $parsed_url['path']; if (empty($this->domain)) { $this->domain = $this->path; $this->path = ""; } $this->setOffset("Current Stream Information"); $this->setFields(); // setting default fields $this->setTableStart("<table border=0 cellpadding=2 cellspacing=2>"); $this->setTableEnd("</table>"); } function setFields($array=False) { if (!$array) $this->fields = $this->fieldsDefaults; else $this->fields = $array; } function setOffset($string) { $this->very_first_str = $string; } function setTableStart($string) { $this->tableStart = $string; } function setTableEnd($string) { $this->tableEnd = $string; } function getHTML($page=False) { if (!$page) $page = $this->path; $contents = ""; $domain = (substr($this->domain, 0, 7) == "http://") ? substr($this->domain, 7) : $this->domain; if (@$fp = fsockopen($domain, $this->port, $this->errno, $this->errstr, 2)) { fputs($fp, "GET ".$page." HTTP/1.1\r\n". "User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows 98)\r\n". "Accept: */*\r\n". "Host: ".$domain."\r\n\r\n"); $c = 0; while (!feof($fp) && $c <= 20) { $contents .= fgets($fp, 4096); $c++; } fclose ($fp); preg_match("/(Content-Type:)(.*)/i", $contents, $matches); if (count($matches) > 0) { $contentType = trim($matches[2]); if ($contentType == "text/html") { $this->isShoutcast = True; return $contents; } else { $this->isShoutcast = False; $htmlContent = substr($contents, 0, strpos($contents, "\r\n\r\n")); $dataStr = str_replace("\r", "\n", str_replace("\r\n", "\n", $contents)); $lines = explode("\n", $dataStr); foreach ($lines AS $line) { if ($dp = strpos($line, ":")) { $key = substr($line, 0, $dp); $value = trim(substr($line, ($dp+1))); if (preg_match("/genre/i", $key)) $this->nonShoutcastData['Stream Genre'] = $value; if (preg_match("/name/i", $key)) $this->nonShoutcastData['Stream Title'] = $value; if (preg_match("/url/i", $key)) $this->nonShoutcastData['Stream URL'] = $value; if (preg_match("/content-type/i", $key)) $this->nonShoutcastData['Content Type'] = $value; if (preg_match("/icy-br/i", $key)) $this->nonShoutcastData['Stream Status'] = "Stream is up at ".$value."kbps"; if (preg_match("/icy-notice2/i", $key)) { $this->nonShoutcastData['Server Status'] = "This is <span style=\"color: red;\">not</span> a Shoutcast server!"; if (preg_match("/ultravox/i", $value)) $this->nonShoutcastData['Server Status'] .= " But an <a href=\"http://ultravox.aol.com/\" target=\"_blank\">Ultravox</a> Server"; $this->altServer = $value; } } } return nl2br($htmlContent); } } else return $contents; } else { return False; } } function getServerInfo($display_array=null, $very_first_str=null) { if (!isset($display_array)) $display_array = $this->fields; if (!isset($very_first_str)) $very_first_str = $this->very_first_str; if ($html = $this->getHTML()) { // parsing the contents $data = array(); foreach ($display_array AS $key => $item) { if ($this->isShoutcast) { $very_first_pos = stripos($html, $very_first_str); $first_pos = stripos($html, $item, $very_first_pos); $line_start = strpos($html, "<td>", $first_pos); $line_end = strpos($html, "</td>", $line_start) + 4; $difference = $line_end - $line_start; $line = substr($html, $line_start, $difference); $data[$key] = strip_tags($line); } else { $data[$key] = $this->nonShoutcastData[$item]; } } return $data; } else { return $this->errstr." (".$this->errno.")"; } } function createHistoryArray($page) { if (!in_array($page, $this->trackLists)) { $this->trackLists[] = $page; if ($html = $this->getHTML($page)) { $fromPos = stripos($html, $this->tableStart); $toPos = stripos($html, $this->tableEnd, $fromPos); $tableData = substr($html, $fromPos, ($toPos-$fromPos)); $lines = explode("</tr><tr>", $tableData); $tracks = array(); $c = 0; foreach ($lines AS $line) { $info = explode ("</td><td>", $line); $time = trim(strip_tags($info[0])); if (substr($time, 0, 9) != "Copyright" && !preg_match("/Tag Loomis, Tom Pepper and Justin Frankel/i", $info[1])) { $this->tracks[$c]['time'] = $time; $this->tracks[$c++]['track'] = trim(strip_tags($info[1])); } } if (count($this->tracks) > 0) { unset($this->tracks[0]); if (isset($this->tracks[1])) $this->tracks[1]['track'] = str_replace("Current Song", "", $this->tracks[1]['track']); } } else { $this->tracks[0] = array("time"=>$this->errno, "track"=>$this->errstr); } } } function getHistoryArray($page="/played.html") { if (!in_array($page, $this->trackLists)) $this->createHistoryArray($page); return $this->tracks; } function getHistoryTable($page="/played.html", $trackColText=False, $class=False) { $title_utf8 = mb_convert_encoding($trackArr ,"utf-8" ,"auto"); if (!in_array($page, $this->trackLists)) $this->createHistoryArray($page); if ($trackColText) $output .= " <div class='lastplayed_top'></div> <div".($class ? " class=\"".$class."\"" : "").">"; foreach ($this->tracks AS $title_utf8) $output .= "<div style='padding:2px 0;'>".$title_utf8['track']."</div>"; $output .= "</div><div class='lastplayed_bottom'></div> <div class='lastplayed_title'>".$trackColText."</div> \n"; return $output; } } // this is needed for those with a php version < 5 // the function is copied from the user comments @ php.net (http://nl3.php.net/stripos) if (!function_exists("stripos")) { function stripos($haystack, $needle, $offset=0) { return strpos(strtoupper($haystack), strtoupper($needle), $offset); } } ?> And the calling script outside the lastplayed.php: include "lastplayed.php"; $radio = new Radio($ip.":".$port); echo $radio->getHistoryTable("/played.html", "<b>Last played:</b>", "lastplayed_content");

    Read the article

  • How do I abort a socket.recv() from another thread in python?

    - by Samuel Skånberg
    I have a main thread that waits for connection. It spawns client threads that will echo the response from the client (telnet in this case). But say that I want to close down all sockets and all threads after some time, like after 1 connection. How would I do? If I do clientSocket.close() from the main thread, it won't stop doing the recv. It will only stop if I first send something through telnet, then it will fail doing further sends and recvs. My code look like this: # Echo server program import socket from threading import Thread import time class ClientThread(Thread): def __init__(self, clientSocket): Thread.__init__(self) self.clientSocket = clientSocket def run(self): while 1: try: # It will hang here, even if I do close on the socket data = self.clientSocket.recv(1024) print "Got data: ", data self.clientSocket.send(data) except: break self.clientSocket.close() HOST = '' PORT = 6000 serverSocket = socket.socket(socket.AF_INET, socket.SOCK_STREAM) serverSocket.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) serverSocket.bind((HOST, PORT)) serverSocket.listen(1) clientSocket, addr = serverSocket.accept() print 'Got a new connection from: ', addr clientThread = ClientThread(clientSocket) clientThread.start() time.sleep(1) # This won't make the recv in the clientThread to stop immediately, # nor will it generate an exception clientSocket.close()

    Read the article

  • How can I diagnose "Cannot determine peer address" in my Perl TCP script?

    - by MadBoy
    I've this little script which does it's job pretty well but sometimes it tends to fail. It fails in 2 cases: with error send: Cannot determine peer address at ./tcp-new.pl line 52 with no output or anything, it just fails to deliver what it got to connected Tcp Client. Usually it happens after I disconnect from server, go home and connect it again. To fix this restart is required and it starts working. Sometimes this problem is followed by problem mentioned in point 1. Note: it's not problem when I disconnect and reconnect to it again within short amount of time (unless error nr 1 happens). So can anyone help me make this code be a bit more stable so I don't have to restart it every day? #!/usr/bin/perl use strict; use warnings; use IO::Socket; use IO::Select; my $tcp_port = "10008"; my $udp_port = "2099"; my $tcp_socket = IO::Socket::INET->new( Listen => SOMAXCONN, LocalPort => $tcp_port, Proto => 'tcp', ReuseAddr => 1, ); my $udp_socket = IO::Socket::INET->new( LocalPort => $udp_port, Proto => 'udp', ); my $read_select = IO::Select->new(); my $write_select = IO::Select->new(); $read_select->add($tcp_socket); $read_select->add($udp_socket); while (1) { my @read = $read_select->can_read(); foreach my $read (@read) { if ($read == $tcp_socket) { my $new_tcp = $read->accept(); $write_select->add($new_tcp); } elsif ($read == $udp_socket) { my $recv_buffer; $udp_socket->recv($recv_buffer, 1024, undef); my @write = $write_select->can_write(); foreach my $write (@write) { $write->send($recv_buffer); } } } }

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >