Search Results

Search found 11914 results on 477 pages for 'networking architecture'.

Page 81/477 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • Current State EA: Focus on the Integration!!!

    - by Eric A. Stephens
    A recent project has me at the front end of a large implementation effort covering multiple software components. In addition to the challenges of integrating 15-20 separate and new software components there is the challenge of integrating the portfolio into an existing environment. Like other clients I've worked with and other environments I've worked in for many years, this is typical. The applications are undocumented and under patched leading to a mystery for any architect leading change.  We can boil down most architecture development methodologies (ADM) into first understanding the current/baseline state and then envisioning one or more future states. Many pundits emphasize the need to focus on the future/target states. I agree since enterprise architecture (EA) is about where you are going and not so much where you have been. But to be effective in the future, I contend some focused time needs to be spent on the current state. And specifically on the integration. Integration is always the difficult part of a project (I might put it more coarsely at a cocktail party). While I don't have a case study, my anecdotal experience suggests poorly integrated application portfolios tend to cost more to operate and create entropy when trying to respond to new changes and opportunities. In the aforementioned project, I was able to get one of our EAs assigned to focus on just integration almost immediately. While we're still early in the process, this EA is uncovering all sorts of information that will greatly assist our future state planning for this solution. This information is driving early decision making that we anticipate will accelerate our efforts moving forward. #next_pages_container { width: 5px; hight: 5px; position: absolute; top: -100px; left: -100px; z-index: 2147483647 !important; } #next_pages_container { width: 5px; hight: 5px; position: absolute; top: -100px; left: -100px; z-index: 2147483647 !important; } #next_pages_container { width: 5px; hight: 5px; position: absolute; top: -100px; left: -100px; z-index: 2147483647 !important; } #next_pages_container { width: 5px; hight: 5px; position: absolute; top: -100px; left: -100px; z-index: 2147483647 !important; }

    Read the article

  • What could be some objective criteria to compare languages? [closed]

    - by rvcoutinho
    I am performing a study on different programming languages (and its related technologies) for a mature corporate architecture. In order to conduct these studies, I need formulate some criteria prior to this evaluation. Some general (and well known) criteria are: readability, writability, reliability, cost and others (such as well-definedness, generality and portability). That said, I present the following questions: What criteria should I not forget? How to make these criteria objective?

    Read the article

  • Undefined symbols for architecture armv7 using route-me

    - by Alex
    I'm trying to compile my project including route-me using armv7 although am struggling with the following error, i have older versions of the same project in git which compiles fine with armv7 so a setting must have changed somewhere to break it, here is the error: Undefined symbols for architecture armv7: "_pj_fwd", referenced from: -[RMProjection latLongToPoint:] in libMapView.a(RMProjection.o) "_pj_inv", referenced from: -[RMProjection pointToLatLong:] in libMapView.a(RMProjection.o) "_pj_init_plus", referenced from: -[RMProjection initWithString:InBounds:] in libMapView.a(RMProjection.o) "_pj_free", referenced from: -[RMProjection dealloc] in libMapView.a(RMProjection.o) ld: symbol(s) not found for architecture armv7 clang: error: linker command failed with exit code 1 (use -v to see invocation) Any help would be greatly appreciated.

    Read the article

  • Getting up to speed on modern architecture

    - by Matt Thrower
    Hi, I don't have any formal qualifications in computer science, rather I taught myself classic ASP back in the days of the dotcom boom and managed to get myself a job and my career developed from there. I was a confident and, I think, pretty good programmer in ASP 3 but as others have observed one of the problems with classic ASP was that it did a very good job of hiding the nitty-gritty of http so you could become quite competent as a programmer on the basis of relatively poor understanding of the technology you were working with. When I changed on to .NET at first I treated it like classic ASP, developing stand-alone applications as individual websites simply because I didn't know any better at the time. I moved jobs at this point and spent the next several years working on a single site whose architecture relied heavily on custom objects: in other words I gained a lot of experience working with .NET as a middle-tier development tool using a quite old-fashioned approach to OO design along the lines of the classic "car" class example that's so often used to teach OO. Breaking down programs into blocks of functionality and basing your classes and methods around that. Although we worked under an Agile approach to manage the work the whole setup was classic client/server stuff. That suited me and I gradually got to grips with .NET and started using it far more in the manner that it should be, and I began to see the power inherent in the technology and precisely why it was so much better than good old ASP 3. In my latest job I have found myself suddenly dropped in at the deep end with two quite young, skilled and very cutting-edge programmers. They've built a site architecture which is modelling along a lot of stuff which is new to me and which, in truth I'm having a lot of trouble understanding. The application is built on a cloud computing model with multi-tenancy and the architecture is all loosely coupled using a lot of interfaces, factories and the like. They use nHibernate a lot too. Shortly after I joined, both these guys left and I'm now supposedly the senior developer on a system whose technology and architecture I don't really understand and I have no-one to ask questions of. Except you, the internet. Frankly I feel like I've been pitched in at the deep end and I'm sinking. I'm not sure if this is because I lack the educational background to understand this stuff, if I'm simply not mathematically minded enough for modern computing (my maths was never great - my approach to design is often to simply debug until it works, then refactor until it looks neat), or whether I've simply been presented with too much of too radical a nature at once. But the only way to find out which it is is to try and learn it. So can anyone suggest some good places to start? Good books, tutorials or blogs? I've found a lot of internet material simply presupposes a level of understanding that I just don't have. Your advice is much appreciated. Help a middle-aged, stuck in the mud developer get enthusastic again! Please!

    Read the article

  • Architecture for highly available MySQL with automatic failover in physically diverse locations

    - by Warner
    I have been researching high availability (HA) solutions for MySQL between data centers. For servers located in the same physical environment, I have preferred dual master with heartbeat (floating VIP) using an active passive approach. The heartbeat is over both a serial connection as well as an ethernet connection. Ultimately, my goal is to maintain this same level of availability but between data centers. I want to dynamically failover between both data centers without manual intervention and still maintain data integrity. There would be BGP on top. Web clusters in both locations, which would have the potential to route to the databases between both sides. If the Internet connection went down on site 1, clients would route through site 2, to the Web cluster, and then to the database in site 1 if the link between both sites is still up. With this scenario, due to the lack of physical link (serial) there is a more likely chance of split brain. If the WAN went down between both sites, the VIP would end up on both sites, where a variety of unpleasant scenarios could introduce desync. Another potential issue I see is difficulty scaling this infrastructure to a third data center in the future. The network layer is not a focus. The architecture is flexible at this stage. Again, my focus is a solution for maintaining data integrity as well as automatic failover with the MySQL databases. I would likely design the rest around this. Can you recommend a proven solution for MySQL HA between two physically diverse sites? Thank you for taking the time to read this. I look forward to reading your recommendations.

    Read the article

  • Bridged virtual interface is not available or visible to ifconfig.

    - by Omniwombat
    Hello all. I'm running Ubuntu 9.04, kernel 2.6.28-18, and vmware-server 2.0.1. I'm attempting to setup a virtual linux machine to use a bridged interface rather than NAT or host-only. Both NAT and host-only work just fine. When running vmware-config.pl, I set /dev/vmnet0 to bridge eth0, /dev/vmnet1 to host-only, and /dev/vmnet8 to NAT. When I run ifconfig -a I see the physical interface (eth0), vmnet1 and vmnet8 both of which are up and have IP addresses assigned to them. I also see other various interfaces that are not relevant here. In the web console, when I ask that the guest machine's network card be bridged, it states that a bridged setup is "Not available" and shows the disabled device icon. Inside the guest machine, I do have an eth0 interface which I can set to anything I like, however it can't see my external network, or the host. I do see errors in my vmware/hostd.log which state: "The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network" which confirms the problem. vmnet-bridge is running, and I see the following in my process table: /usr/bin/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0 -i eth0 I confirm that the /var/run/vmnet-bridge-0.pid file is there and that it points to the correct process. I saw this question relating to Ubuntu 9.04 and bridged interfaces, in which the poster determined that the vsock library was not getting built due to a flaw in the vmware-config.pl script. I applied the patch, reran the script, and confirm that vsock.ko and vsock.o are in my /lib directory structure. vsock does show up in an lsmod. My /etc/vmware directory has /vmnet1 and /vmnet8 subdirectories. They contain configuration utilities for running DHCP and nat type services as expected. There is no vmnet0 subdirectory. My /etc/vmware/netmap.conf file DOES show entries for vmnet0; both the name and the device as I configured it from the script. My /dev directory contains devices vmnet0 through vmnet9. They have major device number 119, and minor device numbers 0 through 9. /proc/net/dev shows statistics for vmnet1 and vmnet8, but not vmnet0. I have a /proc/vmnet directory, but it's empty. When I start or stop the vmware service with /etc/init.d/vmware start, I see the following: Starting VMware services: Virtual machine monitor done Virtual machine communication interface done VM communication interface socket family: done Virtual ethernet done Bridged networking on /dev/vmnet0 done Host-only networking on /dev/vmnet1 (background) done DHCP server on /dev/vmnet1 done Host-only networking on /dev/vmnet8 (background) done DHCP server on /dev/vmnet8 done NAT service on /dev/vmnet8 done VMware Server Authentication Daemon (background) done Shared Memory Available done Starting VMware management services: VMware Server Host Agent (background) done VMware Virtual Infrastructure Web Access Starting VMware autostart virtual machines: Virtual machines done Nothing appears to be wrong there. What n00b thing am I doing such that vmnet0 and only vmnet0 does not show up in the interface list?

    Read the article

  • One True Event Loop

    - by CyberShadow
    Simple programs that collect data from only one system need only one event loop. For example, Windows applications have the message loop, POSIX network programs usually have a select/epoll/etc. loop at their core, pure SDL games use SDL's event loop. But what if you need to collect events from several subsystems? Such as an SDL game which doesn't use SDL_net for networking. I can think of several solutions: Polling (ugh) Put each event loop in its own thread, and: Send messages to the main thread, which collects and processes the events, or Place the event-processing code of each thread in a critical section, so that the threads can wait for events asynchronously but process them synchronously Choose one subsystem for the main event loop, and pass events from other subsystems via that subsystem as custom messages (for example, the Windows message loop and custom messages, or a socket select() loop and passing events via a loopback connection). Option 2.1 is more interesting on platforms where message-passing is a well-developed threading primitive (e.g. in the D programming language), but 2.2 looks like the best option to me.

    Read the article

  • Realize the Benefits of Oracle Fusion Architecture Today; Get on the Path to Oracle Fusion Applicati

    Vijay Tella, Vice President and Chief Strategy Officer, Oracle Fusion Middleware, discusses with Cliff the relationship between Oracle Fusion Architecture and Service Oriented Architecture (SOA). They also discuss how Oracle is enabling Fusion Architecture with integration between Oracle Fusion Middleware and the Oracle E-Business Suite, PeopleSoft Enterprise, and JD Edwards Enterprise One suites of applications.

    Read the article

  • Why do we use networking libraries instead of plain NSURLRequests and NSURLConnection ?

    - by Amogh Talpallikar
    in iOS development, I have often seen people creating a networking module to interact with their APIs. This module generally sits on top of a networking framework like MKNetWorkKit or AFNetWorking. In most of the cases, It's all about sending GET,POST request and parsing the response which is in most cases JSON. What extra practical benefits that these libraries provide that an iOS developer should be leveraging which the plain Cocoa Networking APIs lack ? I can understand RESTKit as one exception where it takes care of the conversion of JSON to native objects and also interfaces with Core Data but what about others ?

    Read the article

  • SAF Deployment What to do when the architecture seems stable?

    The last activity of SAF is deployment of the architecture. This step can make the difference between an ivory-tower architect and one whose designs are actually used in real software projects.Deployment of the architecture actually means two thingsVerification and feedback loop. – making sure the architecture is actually the right one.Governance – making sure that [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • HP présente "Net-Zero Energy DataCenter", une architecture permettant une réduction de 30% de la consommation d'énergie et de 80% des coûts

    HP présente son architecture "Net-Zero Energy DataCenter", permettant une réduction de 30% de la consommation d'énergie et de 80% des coûts et dépendance des réseaux électriques HP vient de présenter son concept d'architecture « Net-Zero Energy » des centres de données économes en énergie, permettant de réduire la dépendance des réseaux électriques traditionnels. La vision de HP est de permettre aux entreprises de faire fonctionner les centres de données avec en utilisant leur propre énergie générée sur place, grâce à des sources renouvelables afin d'éliminer des dépendances comme l'emplacement, l'approvisionnement en énergie et les couts. L'architecture proposée ...

    Read the article

  • Automate Windows 7's file sharing and firewall settings

    - by nhinkle
    I am working with my school to customize Windows 7 on some new laptops we are receiving. The laptops come with Windows 7 Professional already installed, and we do not need or want to reimage them. We would however like to customize the installation once it is in place, through a series of scripts. We will also be deploying these scripts to computers which have already been set up. Most of the settings we wish to change can be done easily from the command line or with a registry file. However, there is one thing we keep getting hung up on: networking options. Is there any unattended way to set the Windows 7 networking configuration? We would like to set the following things automatically, which are found under Control Panel > Network and Sharing Center > Advanced sharing settings > Home or Work network: Turn on network discovery Turn on printer and file sharing Turn off public folder sharing Turn on password protected sharing Use user accounts and passwords to connect to other computers We also need to configure the firewall to allow the following exceptions: File and printer sharing Remote assistance Remote desktop Remote scheduled tasks management Remote service management Windows remote management I've looked around, and can't find any way to change these things - I looked into netsh, registry settings, and even used RegMon to watch while I changed the values manually, all to no avail. Google hasn't offered up anything helpful so far. If anyone could provide some insight, I would very much appreciate it. I did find out that much of this is configurable with group policy, but because these computers are in a workgroup, not a domain, I don't know of any way to take advantage of that in an unattended manner.

    Read the article

  • Debian network bridge configuration - /etc/network/interfaces

    - by Mathias
    I'm running a Lenny Xen dom0 hosting multiple virtual machines in a routed IP setup. To get an additional private subnet, I created the bridge xenbr0 in the dom0 with the following commands: brctl addbr xenbr0 ifconfig xenbr0 10.0.0.1 netmask 255.255.255.0 ifconfig xenbr0 up This works as expected, and domU interfaces are added to the bridge by Xen on VM start. My only problem is: how the heck do i specify this configuration in /etc/network/interfaces that it remains permanent and the bridge is available after a reboot? I tried the following config as found on a lot of tutorials: auto xenbr0 iface xenbr0 inet static address 10.0.0.1 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 bridge_stp no I get 2 different errors, depending on if the bridge already exists or not. If it doesn't exist: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). SIOCSIFADDR: No such device xenbr0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device xenbr0: ERROR while getting interface flags: No such device xenbr0: ERROR while getting interface flags: No such device Failed to bring up xenbr0. done. And if it exists: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces xenbr0 8000.000000000000 no root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). RTNETLINK answers: File exists Failed to bring up xenbr0. done. Could anyone point me in the right direction please? The bridge works fine when created manually, i just need the right config file entries. The most tutorials I found add some devices to the bridge in the config, is that maybe the problem why it is not working? I don't have any interfaces I want to add to the bridge on creation as they get added later on VM start... Thanks, Mathias

    Read the article

  • C# sends SQL data 4 times less from one box than from another

    - by Bobb
    W2003, .NET 3.5, SQL 2008 I have prod and UAT app servers deployed in 2 different data centres. I have a C# app which reads text file, parse the text and sends the data to the SQL in bulk. SQL server is in US and the app servers are in London (but in different places). All POPs have dedicated network connections. There is no public internet involved. When the app runs on UAT server I can see in Perfmon that the Send byte/sec is x4 higher than from production server. My estimate is that one server outputs at 1 MB/s and the other at 250 KB/s rate. My suspicion immediately is that there is a router on one of the DCs which shapes traffic or does QoS limitation on traffice from London to US. However support and Windows team and networkig team all are saying that there are no differences in neither networking config on the 2 DCs nor NIC config on the 2 app server... How to find out why is the networking bottlneck is 4 times tighter in one place than in the other? What can I do about it?

    Read the article

  • Setup shared internet connection on virtualbox with fixed IP

    - by Tom
    I am a web developer and until recently I have been using ubuntu as my OS. For many reasons, I have switched back to windows. I still want to keep my server on linux platform, so I setup my local server as a virtual machine. Everything works great, but i have a little struggle with the networking. Since I am working in different places and going around clients, I connect to all sorts of network with different settings. That means the possible IP range is very dynamic which causes issues when I work on my local server. At the moment I have a dynamic IP on my host and static IP on my guest. That way I can access the server from my host (by adding record to hosts file). I also have internet connection on the guest. But once i change networks, it does not work (assuming the network has different configuration). My question is, how to setup host-guest networking, so no matter what network I connect to, I can keep my static IP on guest, which is registered in hosts file on my host so I can access the webserver and also I will have internet connection on the guest? Hope it make sense. Thank you

    Read the article

  • VPN with VLANs? [closed]

    - by Craig
    As usual, I'm sure I'm in way over my head on this one. My networking skills are limited; so, bear with me if you will. What I have are a few testing servers at my house as well as at a friends house that I want to link together so they can see each other (VPN right? I've done those before). We want to be able to see all the servers and work with them from either location. All the servers also need to be able to see each other. But, we don't want to see each others PCs, printers, PS3s etc. How do we pull that trick off? Multiple VLAN?... subnets?... what? If hardware matters, I have an old PC I was planning on loading pfSense onto because my current el-cheapo router doesn't support VPN. The VPN linking the houses is about the only thing I'm sure on. Beyond that, I'm lost. I'm not a complete noob; but, like I said, I'm not so sharp with the more complex networking. I do however read well... So use lots of descriptive words and feel free to link away to long dry articles if necessary. :-)

    Read the article

  • Having an issue trying to get Gigabit speed across my network (Ubuntu Server)

    - by user94217
    I've just started looking into the network speeds at my office, the entire network is setup to be "Gigabit". This includes Gb switches, Gb Network cards and Cat 5e cabling. I'm not expecting the full speed, I just want more than ~90 Mb/s. I've been running some tests with iperf the linux tools and checking the hardware with ethtool. I have 3 servers and when doing my checks/test I discovered that the two backup servers can access each other at around 450 Mb/s but when using either one of them to connect and test the main server, I only get the 90Mb/s even though ethtool shows the networking card running at 1000/Full. The only difference between all the server/networking cards is the "Port" which ethtool shows. On the two backup servers the "Port" is shown as MII yet on the other it's shown as "Twisted Pair". When using ethtool -s to manually set the "Port" to MII on the main server, it looses all connectivity and does not show "Speed" or "Duplex". Anyway, Am i doing something wrong? Is there a specific reason my main server cannot use Gb when there appears to be no difference except the "Port"?

    Read the article

  • Automatic switching of network card when vm is moved

    - by spock
    I have two hosts in a pool and I used to be able to move the vm around and they will start without any problem. But after I played around with some network setting, which I don't remember what, I started getting "This VM needs storage that cannot be seen from that server" message. As you can tell I am a beginner with Xenserver. Here is the very simple environment: 2 host servers with their own local hard disk and network card. One is a Pool master. Problem: Power off a vm and move vm from one server to another, or clone one vm to the other server. It used to be able to start up right away. Now, I need to delete one of the network that does not belong to the server, then it will start. Otherwise, the above error msg popup. The two networks (one for each network card in each host) are in the Networking tab of the vm, as well as in the host's networking tab. I googled but all I got to empty the DVD drive, which is not the problem here. Thanks in advance!

    Read the article

  • What is wrong with my home network? (Routing and connection issues)

    - by David
    I have a corporate laptop that was provided to me by a client and I'm having some rather odd difficulties with it when I put the laptop on my home network. When I first brought the machine home it behaved like any other laptop. Once it was connected to the network it was assigned an IP address and I could remote into it just fine using the machine name. Lately though, whenever I put this laptop on my network I am not able to ping or RDP into the machine as the host name doesn't properly resolve. Additionally I'm able to see the device and it's assigned IP address clearly in my router firmware. This gets even more strange as now when I try to ping it's IP address listed in my router, I see that it's actually trying to ping my own machine (screenshot of this very odd event below). This has actually driven me crazy to the point that I have actually replaced my router (it was behaving oddly in other ways), and I'm continuing to have these problems. The above ping capture is from the new router. As far as network goes I am now currently using an NetGear R7000 Nighthawk and I haven't customized any of the networking settings in the router just yet (installed yesterday). I would appreciate any advice possible and would be happy to provide further diagnostic information. Networking isn't my strong suit, so I'm not even sure where to begin unraveling this thing.

    Read the article

  • Setting up a server that routes local traffic through vpn, while still being able to access internet directly

    - by Kazuo
    The goal is to setup a local server that routes local traffic through an uncontrolled remote vpn service while still being able to access the internet directly (not tunneled via vpn) and provide services through that direct connection. It is supposed to look like this: http://i.stack.imgur.com/74dGC.png Note: There is another router with modem between the local server and the internet. What is the easiest (best?) way to get this network setup working? I'm planning to setup the connection between the local router and the local server with simple ip forwarding. The problem now is that all the server's traffic is routed through the vpn tunnel as soon as I connect the server's openvpn client to the remote service so there is no direct internet connection available. My first idea was to setup a virtual machine (lxc container or something) and run the vpn client and local networking stuff in the vm. So that the vm receives all the incoming traffic from the local router and tunnels it through the vpn. This, as far as I understand, should not affect the physical server's network connection and should allow it to provide services to the internet. Before I start trying to set this up (I don't have much experience in networking), is there any easier or better way to do this? I would be thankful for every suggestion. Edit: Let's say the interface connected to the internet is eth0 and the interface connected to the local router is eth1. Another idea would be to create a virtual interface eth0:0 and specifiy it as openvpn's local endpoint and then force any traffic coming from eth1 through eth0:0. I'm not sure how I would force the traffic through eth0:0, though (possibly by adding routes).

    Read the article

  • Renaming VLAN Interfaces in Linux

    - by rhololkeolke
    I need to know how to rename VLAN interfaces. I'm currently running Ubuntu 11.04. I'm running a networking application that takes frames on one interface applies things like delays and errors and then forwards the frames out another interface. The default naming convention which names things <interface>.<vlan> e.g. eth0.2 will not work for my purposes because the program which parses the configuration script for the networking application doesn't like the decimal in the interface name. I ran vconfig set_name_type VLAN_PLUS_VID which solves the decimal in the interface name problem, however, I can then no longer assign the same vlan id to multiple interfaces because they have the same name. I know how to change physical interface names using udev rules, but because the vlan's will have the same MAC address and they aren't physical interfaces I can't use those rules to rename the interfaces. Is there a way to rename any interface in linux, including the virtual ones? Is there a way to specify your own naming convention for config set_name_type option without having to recompile the source of vconfig?

    Read the article

  • Bulk email notifications API for social networking site

    - by goombaloon
    I'm looking to build a social networking site that notifies followers of a particular user when new content has been posted by that user. Since the hope is that the site will eventually have thousands of users with thousands of followers, I'd prefer to use an outside product/service to send the emails rather than building the functionality into the application and dealing with scalability issues. I've looked at MailChimp and a few others out there. Since my use case isn't really email campaigns, these providers don't seem like the right solution. In fact, MailChimp support confirmed for me that my scenario doesn't fit for them. I'm sure others have run into this same requirement. What are others out there using? I'm using .NET so would like to target something that has a .NET wrapper if possible. Any advice would be most appreciated!

    Read the article

  • Learning networking fundamentals

    - by bplus
    Not having a CS degree has left large holes in my programming related knowledge. In particular I'd really like to learn some of the computer networking stuff I would have got in a good CS degree. The problem I really have is "not knowing what I don't know". So far I know I don't know anything about the following (as far as computer networks are concearned) -sockets -ports -internet protocol (the whole IP stack I keep hearing about). Can anyone add more to the list? Can anyone suggest a project (writing a toy web server?) Thanks in advance

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >