Search Results

Search found 6881 results on 276 pages for 'storage spaces'.

Page 81/276 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • NFS high CPU usage

    - by user269836
    Hello, I have a very strange issue. I have next server: Intel(R) Xeon(TM) MP CPU 3.16GHz cat /proc/cpuinfo | grep proce | wc -l 8 free -m total used free shared buffers cached Mem: 28203 27606 596 0 10789 9714 -/+ buffers/cache: 7103 21100 Swap: 24695 0 24695 RAID card *-storage description: RAID bus controller product: MegaRAID vendor: LSI Logic / Symbios Logic physical id: 7 bus info: pci@0000:13:07.0 logical name: scsi2 version: 01 width: 32 bits clock: 66MHz capabilities: storage pm bus_master cap_list rom configuration: driver=megaraid latency=32 resources: irq:134 memory:d8ff0000-d8ffffff(prefetchable) memory:df600000-df60ffff(prefetchable) HDD: 10x148Gb SCSI U320 15k - RAID5 /dev/sdb1 807G 674G 93G 88% /storage /dev/sdb1 /storage ext4 defaults,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,noatime,nodiratime,noacl,errors=remount-ro 0 1 network cards ethtool -i eth0 driver: tg3 version: 3.116 firmware-version: 5704-v3.36, ASFIPMIc v2.36 bus-info: 0000:10:02.0 ethtool -i eth1 driver: tg3 version: 3.116 firmware-version: 5704-v3.36, ASFIPMIc v2.36 bus-info: 0000:10:02.0 ifconfig bond0 Link encap:Ethernet HWaddr 00:0f:1f:ff:d6:4d inet addr:192.168.15.71 Bcast:192.168.15.255 Mask:255.255.255.0 inet6 addr: fe80::20f:1fff:feff:d64d/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:1062818202 errors:0 dropped:3918 overruns:0 frame:0 TX packets:1041317321 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10000 RX bytes:258867684559 (241.0 GiB) TX bytes:396569192650 (369.3 GiB) this server running only nfs-kernel-server uname -a Linux nas2-backup 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux Debian 6. What do I have, once per day or two, LA goes up, it can be reached around LA: 40 but if I do: nfs-kernel-server restart. Every thing is OK. But on the next day or a little bit later, LA goes up again. Servers are connected to d-link dgs 1016d with 24 GBits ports. I have tried everything to find out what the problem is. Why it's happening, but still I can not resolve this issue. Any ideas on what is happening here?

    Read the article

  • Exchange DiskShadow/Robocopy backup does not purge log files

    - by Robert Allan Hennigan Leahy
    I have a series of scripts setup to backup my Exchange. The following command is executed to start the process: diskshadow /s C:\Backup_Scripts\exchangeserverbackupscript1.dsh This is exchangeserverbackupscript1.dsh: #DiskShadow script file set verbose on #delete shadows all set context persistent writer verify {76fe1ac4-15f7-4bcd-987e-8e1acb462fb7} set metadata C:\Backup_Scripts\shadowmetadata.cab begin backup add volume C: alias SH1 create expose %SH1% P: exec C:\Backup_Scripts\exchangeserverbackupscript1.cmd end backup delete shadows exposed P: exit #End of script And this is exchangeserverbackupscript1.cmd: robocopy "P:\Program Files\Microsoft\Exchange Server\Mailbox\First Storage Group" "\\leahyfs\J$\E-Mail Backups\Day 1" /MIR /R:0 /W:0 /COPY:DT /B This is not causing Exchange to purge its log files. The edb file is 4.7 gigabytes, but the First Storage Group folder itself is 50+ gigabytes due to many, many log files for each day going back to 2009. Is there any way -- I've Googled and haven't found anything -- to notify Exchange when I've completed a full backup, and have it purge its log files? According to this and this, end backup should cause Exchange to "flush the transaction logs for that storage group" but only "if a successful backup of a storage group occurred", which leaves my question as: What constitutes a "successful backup", and why is what I'm doing not it?

    Read the article

  • What does this mean: "SATP VMW_SATP_LOCAL does not support device configuration"?

    - by Jason Tan
    Can anyone tell me what this means in ESXi 5.1?: SATP VMW_SATP_LOCAL does not support device configuration I've googled it and I get a lot of results, but as yet all the pages that contain the string are discussing other matters. The storage array is a HDS HUS-VM and the hosts are HP b460c G8 blades with flex fabric and flex fabric VCs which I am in the process of commissioning and would like to get it started on the right foot - i.e. error and warning free! naa.600508b1001c56ee3d70da65f071da23 Device Display Name: HP Serial Attached SCSI Disk (naa.600508b1001c56ee3d70da65f071da23) Storage Array Type: VMW_SATP_LOCAL Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration. Path Selection Policy: VMW_PSP_FIXED Path Selection Policy Device Config: {preferred=vmhba0:C0:T0:L1;current=vmhba0:C0:T0:L1} Path Selection Policy Device Custom Config: Working Paths: vmhba0:C0:T0:L1 Is Local SAS Device: true Is Boot USB Device: false This is the same LUN: ~ # esxcli storage core device list -d naa.60060e80132757005020275700000016 naa.60060e80132757005020275700000016 Display Name: HITACHI Fibre Channel Disk (naa.60060e80132757005020275700000016) Has Settable Display Name: true Size: 204800 Device Type: Direct-Access Multipath Plugin: NMP Devfs Path: /vmfs/devices/disks/naa.60060e80132757005020275700000016 Vendor: HITACHI Model: OPEN-V Revision: 5001 SCSI Level: 2 Is Pseudo: false Status: degraded Is RDM Capable: true Is Local: false Is Removable: false Is SSD: false Is Offline: false Is Perennially Reserved: false Queue Full Sample Size: 0 Queue Full Threshold: 0 Thin Provisioning Status: unknown Attached Filters: VAAI_FILTER VAAI Status: supported Other UIDs: vml.020001000060060e801327570050202757000000164f50454e2d56 Is Local SAS Device: false Is Boot USB Device: false ~ #

    Read the article

  • Cluster FIle System

    - by Ben
    We are looking for to choose a clustered file system for our in house appplication. Let me first highlight my requirement. we have a storage and 2 servers at present.We get the data files from remote servers to our server and on both servers we are running our application to access those data and make a final result as per our requirements. In future may be after 3-4 months, we can add another servers in current cluster pool to handle more data load from remote location data senders. So my requirement is that to integrate same storage partition on 2-3 servers , it might be 4-5 more servers in future, My application read data from storage partition and write back to storage partition. Is there any bottleneck / limitation from RHCS , GFS2 or anything.? We are new with RHCS + GFS and all. Can we have any other better approach or someway to deal with our requirement light way? what is the best OS version for this ? how's RHEL 6.4 64 bit ? please share some case study or some gudie reference as per past experiences with such environnmnets Regards, Ben

    Read the article

  • Exchange 2007 - Mailbox Database Recovery

    - by Phrontiste
    Exchange 2007 edb Can we restore Exchange edb (First storage group\mailbox database.edb) to another exchange server ? Do I just copy the edb to the new exchange server and delete the first storage group\mailbox database.edb and replace it with this one ? How can I get all the mailboxes from that (old) mailbox database.edb ? I had a exchange 2007 server with 10 mailboxes, I have installed exchange on another machine and was thinking if I can do the above ? or is there any way I can get all the mailboxes from that edb (old mailbox database) and import them into the new one. I have deleted the old exchange install I had (these are test machines) What are the steps required to get the DB working on the new machine ? Also, I am confused about the recovery storage group ? I can mount a mailbox database in recovery storage group, but when I try to get mailbox out of it, it won't match any thing ? can someone please assist in understanding RSG and how to restore the OLD mailbox database. thanks and regards Phrontiste

    Read the article

  • Using NFS for scalable PHP/MySQL web application

    - by Jeroen Moons
    Here's the situation: I have a PHP/MySQL web application that accepts user uploads (pdf files). From these pdf files' pages a preview image is made on the fly and presented to the web app's users. Some pdfs might be on the large side, most will be under 50 MB but some extreme cases could be as large as a few hundred MB. A little waiting for the preview image for large pdf files is acceptable but no more than a minute let's say. Everything is running on one server for now, but soon the app will hit the server's limit on both storage and processing power. My idea to solve the problem: To deal with this situation I had the idea of having one or more pdf processing servers as needed, and one or more file storage servers. These two types of servers are mounted to the server on which the actual app runs using NFS. The app could then use GearMan to delegate pdf processing tasks to these processing servers. The processing server can mount the storage server and read the file stored there, process it and write its output to that server. The servers I'm talking about will be amazon ec2 instances. The web app returns a link to the resulting pdf preview image on the storage server that was used which can then be used on the front end to show the image to the user. My question: I have zero experience with apps that use multiple servers, is this idea viable or is there a better way to do it? Is an NFS setup fast and reliable enough for this situation?

    Read the article

  • What is the best cloud technology to use for MongoDB/GridFS database servers

    - by Nerian
    We are going to launch a service that will require between 1 and 2 GB for file storage per paid user. I am going to use GridFS for storing files. GridFS is a module for MongoDB that allows to store large files in de database. I am pondering the different options for storing the database. But since I am unexperienced at deployment and it is my first time with Mongodb I need your experience. Criteria: I want to spend my time developing my core business, that is, my own application. I am a Ruby on Rails developer. I do not like to mess with server configuration. Hence, I would like a fully managed hosting solution. But I would like to know about any other option, if you think it is worth it. It should be able to scale. Cloud style. Pay as you go. The lower the price, the better. So far I known of these services: https://mongohq.com/pricing https://mongomachine.com/pricing https://mongolab.com/about/pricing/ http://cloudcontrol.com/add-ons/mongodb/ And they seem to be OK for common needs, that is no file storage. But I am going to use GridFS, so the size matters. These services seems to scale, in price, quite poorly. MongoHQ: The larger plan max storage is 20 GB. Seems like a very little storage, for GridFS. MongoMachine: Flat price, 2.5$ per GB. I didn't found the limit. Seems like a good price, comparing the others. MongoLab: 3.984 GB max, which I don't think I will hit, so perfect. 8$ per GB, quite costly. CloudControl: The larger plan is 20 Gb. The custom service starts at 250€ plus some unspecified charge per GB. What is your experience with these services? Any downtimes? Other possibilities? Edit: Added meaning of GridFS

    Read the article

  • external drive and CentOS - Reset high speed USB device number

    - by Phil
    I have 2 external drives (3TB) and both will not work with my centOS Box. Tested them in windows ( different machine ) No problems ( 2.6.32-279.9.1.el6.i686 ) dmesg reports: usb 2-2: new high speed USB device number 3 using ehci_hcd usb 2-2: New USB device found, idVendor=2109, idProduct=0700 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: USB 3.0 SATA Bridge usb 2-2: Manufacturer: VIA Labs, Inc. usb 2-2: SerialNumber: 0000000000006121 usb 2-2: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access ST3000DM 001-9YN166 CC4B PQ: 0 ANSI: 2 sd 6:0:0:0: Attached scsi generic sg3 type 0 sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] 5860533165 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 6:0:0:0: [sdd] Write Protect is off sd 6:0:0:0: [sdd] Mode Sense: 00 06 00 00 sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] Assuming drive cache: write through sdd: sdd1 sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] Attached SCSI disk Tyring to use cfdisk / fdisk / gdisk or even fdisk -l results in the program hanging and dmesg reports: usb 2-2: reset high speed USB device number 3 using ehci_hcd usb 2-2: reset high speed USB device number 3 using ehci_hcd usb 2-2: reset high speed USB device number 3 using ehci_hcd I have the same 2 drives physically installed in the computer via SATA Any Ideas?

    Read the article

  • Best format for hard drive for Windows and Mac?

    - by Neil
    I have a 500 GB USB External Hard Drive. I need four partitions on it, for the following purposes: 160 GB for a bootable backup of my Mac. 160 GB for a bootable backup of my Windows. 11 GB for a bootable Snow Leopard Install Disk Rest as for file storage. Now I need a partition table which will get recognised on both Windows and Mac, without needing extra software on Windows, which will let me keep bootable copies of both OS'es, but let me access the file storage from both OS'es. Currently, I have a GUI Partition Table, with Mac OS Extended (Journaled) Partitions for the two backups, Mac OS Extended for the Install Disk, and NTFS for the file storage. While this gets recognised perfectly on my Mac, thanks to an NTFS for Mac driver from Paragon, when connected to Windows, the drive is detected by the machine (listed in Safely Remove USB), but not recognised in Windows Explorer unless I install MacDrive, which is not feasible for me to install on public Windows Machines I might wanna access my storage area on. Can someone recommend the best combination of formats and software/drivers to get this done seamlessly?

    Read the article

  • 8 Backup Tools Explained for Windows 7 and 8

    - by Chris Hoffman
    Backups on Windows can be confusing. Whether you’re using Windows 7 or 8, you have quite a few integrated backup tools to think about. Windows 8 made quite a few changes, too. You can also use third-party backup software, whether you want to back up to an external drive or back up your files to online storage. We won’t cover third-party tools here — just the ones built into Windows. Backup and Restore on Windows 7 Windows 7 has its own Backup and Restore feature that lets you create backups manually or on a schedule. You’ll find it under Backup and Restore in the Control Panel. The original version of Windows 8 still contained this tool, and named it Windows 7 File Recovery. This allowed former Windows 7 users to restore files from those old Windows 7 backups or keep using the familiar backup tool for a little while. Windows 7 File Recovery was removed in Windows 8.1. System Restore System Restore on both Windows 7 and 8 functions as a sort of automatic system backup feature. It creates backup copies of important system and program files on a schedule or when you perform certain tasks, such as installing a hardware driver. If system files become corrupted or your computer’s software becomes unstable, you can use System Restore to restore your system and program files from a System Restore point. This isn’t a way to back up your personal files. It’s more of a troubleshooting feature that uses backups to restore your system to its previous working state. Previous Versions on Windows 7 Windows 7′s Previous Versions feature allows you to restore older versions of files — or deleted files. These files can come from backups created with Windows 7′s Backup and Restore feature, but they can also come from System Restore points. When Windows 7 creates a System Restore point, it will sometimes contain your personal files. Previous Versions allows you to extract these personal files from restore points. This only applies to Windows 7. On Windows 8, System Restore won’t create backup copies of your personal files. The Previous Versions feature was removed on Windows 8. File History Windows 8 replaced Windows 7′s backup tools with File History, although this feature isn’t enabled by default. File History is designed to be a simple, easy way to create backups of your data files on an external drive or network location. File History replaces both Windows 7′s Backup and Previous Versions features. Windows System Restore won’t create copies of personal files on Windows 8. This means you can’t actually recover older versions of files until you enable File History yourself — it isn’t enabled by default. System Image Backups Windows also allows you to create system image backups. These are backup images of your entire operating system, including your system files, installed programs, and personal files. This feature was included in both Windows 7 and Windows 8, but it was hidden in the preview versions of Windows 8.1. After many user complaints, it was restored and is still available in the final version of Windows 8.1 — click System Image Backup on the File History Control Panel. Storage Space Mirroring Windows 8′s Storage Spaces feature allows you to set up RAID-like features in software. For example, you can use Storage Space to set up two hard disks of the same size in a mirroring configuration. They’ll appear as a single drive in Windows. When you write to this virtual drive, the files will be saved to both physical drives. If one drive fails, your files will still be available on the other drive. This isn’t a good long-term backup solution, but it is a way of ensuring you won’t lose important files if a single drive fails. Microsoft Account Settings Backup Windows 8 and 8.1 allow you to back up a variety of system settings — including personalization, desktop, and input settings. If you’re signing in with a Microsoft account, OneDrive settings backup is enabled automatically. This feature can be controlled under OneDrive > Sync settings in the PC settings app. This feature only backs up a few settings. It’s really more of a way to sync settings between devices. OneDrive Cloud Storage Microsoft hasn’t been talking much about File History since Windows 8 was released. That’s because they want people to use OneDrive instead. OneDrive — formerly known as SkyDrive — was added to the Windows desktop in Windows 8.1. Save your files here and they’ll be stored online tied to your Microsoft account. You can then sign in on any other computer, smartphone, tablet, or even via the web and access your files. Microsoft wants typical PC users “backing up” their files with OneDrive so they’ll be available on any device. You don’t have to worry about all these features. Just choose a backup strategy to ensure your files are safe if your computer’s hard disk fails you. Whether it’s an integrated backup tool or a third-party backup application, be sure to back up your files.

    Read the article

  • Rob Blackwell on interoperability and Azure

    - by Eric Nelson
    At QCon in March we had a sample Azure application implemented in both Java and Ruby to demonstrate that the Windows Azure Platform is not just about .NET. The following is an interesting interview with Rob Blackwell, the R&D director of the partner who implemented the application. UK Interoperability Team Interviews Rob Blackwell, R&D Director at Active Web Solutions. Is Microsoft taking interoperability seriously? Yes. In the past, I think Microsoft has, quite rightly come in for criticism, but architects and developers should look at this again. The Interoperability Bridges site (http://www.interoperabilitybridges.com/ ) shows a wide range of projects that allow interoperability from Java, Ruby and PHP for example. The Windows Azure platform has been architected with interoperable APIs in mind. It's straightforward to access the various storage facilities from just about any language or platform. Azure compute is capable of running more than just C# applications! Why is interoperability important to you? My company provides consultancy and bespoke development services. We're a Microsoft Gold Partner, but we live in the real world where companies have a mix of technologies provided by a variety of vendors. When developing an enterprise software solution, you rarely have a completely blank canvas. We often see integration scenarios where we need to exchange data with legacy systems. It's not unusual to see modern Silverlight applications being built on top of Java or Mainframe based back ends. Could you give us some examples of where interoperability has been important for your projects? We developed an innovative Sea Safety system for the RNLI Lifeboats here in the UK. Commercial Fishing is one of the most dangerous professions and we helped developed the MOB Guardian System which uses satellite technology and man overboard devices to raise the alarm when a fisherman gets into trouble. The solution is implemented in .NET running on Windows, but without interoperable standards, it would have been impossible to communicate with the satellite gateway technology. For more information, please see the case study: http://www.microsoft.com/casestudies/Case_Study_Detail.aspx?CaseStudyID=4000005892 More recently, we were asked to build a web site to accompany the QCon 2010 conference in London to help demonstrate and promote interoperability. We built the site using Java and Restlet and hosted it in Windows Azure Compute. The site accepts feedback from visitors and all the data is stored in Windows Azure Storage. We also ported the application to Ruby on Rails for demonstration purposes. Visitors to the stand were surprised that this was even possible. Why should Java developers be interested in Windows Azure? Windows Azure Storage consists of Blobs, Queues and Tables. The storage is scalable, durable, secure and cost-effective. Using the WindowsAzure4j library, it's easy to use, and takes just a few lines of code. If you are writing an application with large data storage requirements, or you want an offsite backup, it makes a lot of sense. Running Java applications in Azure Compute is straightforward with tools like the Tomcat Solution Accelerator (http://code.msdn.microsoft.com/winazuretomcat )and AzureRunMe (http://azurerunme.codeplex.com/ ). The Windows Azure AppFabric Service Bus can also be used to connect heterogeneous systems running on different networks and in different data centres. How can The Service Bus be considered an interoperability solution? I think that the Windows Azure AppFabric Service Bus is one of Microsoft’s best kept secrets. Think of it as “a globally scalable application plumbing kit in the sky”. If you have used Enterprise Service Buses before, you’ll be familiar with the concept. Applications can connect to the service bus to securely exchange data – these can be point to point or multicast links. With the AppFabric Service Bus, the applications can exist anywhere that has access to the Internet and the connections can traverse firewalls. This makes it easy to extend or scale your application or reach out to other networks and technologies. For example, let’s say you have a SQL Server database running on premises and you want to expose the data to a Java application running in the cloud. You could set up a point to point Service Bus connection and use JDBC. Traditionally this would have been difficult or impossible without punching holes in firewalls and compromising security. Rob Blackwell is R&D Director at Active Web Solutions, www.aws.net , a Microsoft Gold Partner specialising in leading edge software solutions. He is an occasional writer and conference speaker and blogs at www.robblackwell.org.uk Related Links: UK Azure Online Community – join today. UK Windows Azure Site Start working with Windows Azure

    Read the article

  • Seems doctrine listener is not fired

    - by Roel Veldhuizen
    Got a service which should be executed the moment an object is persisted. Though, I think the code looks like it should work, it doesn't. I configured the service like the following yml. services: bla_orm.listener: class: Bla\OrmBundle\EventListener\UserManager arguments: [@security.encoder_factory] tags: - { name: doctrine.event_listener, event: prePersist } The class: namespace Bla\OrmBundle\EventListener; use Doctrine\ORM\Event\LifecycleEventArgs; use Bla\OrmBundle\Entity\User; class UserManager { protected $encoderFactory; public function __construct(\Symfony\Component\Security\Core\Encoder\EncoderFactoryInterface $encoderFactory) { $this->encoderFactory = $encoderFactory; } public function prePersist(LifecycleEventArgs $args) { $entity = $args->getEntity(); if ($entity instanceof User) { $encoder = $this->encoderFactory ->getEncoder($entity); $entity->setSalt(rand(10000, 99999)); $password = $encoder->encodePassword($entity->getPassword(), $entity->getSalt()); $entity->setPassword($password); } } } Symfony version: Symfony version 2.3.3 - app/dev/debug Output of container:debug [container] Public services Service Id Scope Class Name annotation_reader container Doctrine\Common\Annotations\FileCacheReader assetic.asset_manager container Assetic\Factory\LazyAssetManager assetic.controller prototype Symfony\Bundle\AsseticBundle\Controller\AsseticController assetic.filter.cssrewrite container Assetic\Filter\CssRewriteFilter assetic.filter_manager container Symfony\Bundle\AsseticBundle\FilterManager assetic.request_listener container Symfony\Bundle\AsseticBundle\EventListener\RequestListener cache_clearer container Symfony\Component\HttpKernel\CacheClearer\ChainCacheClearer cache_warmer container Symfony\Component\HttpKernel\CacheWarmer\CacheWarmerAggregate data_collector.request container Symfony\Component\HttpKernel\DataCollector\RequestDataCollector data_collector.router container Symfony\Bundle\FrameworkBundle\DataCollector\RouterDataCollector database_connection n/a alias for doctrine.dbal.default_connection debug.controller_resolver container Symfony\Component\HttpKernel\Controller\TraceableControllerResolver debug.deprecation_logger_listener container Symfony\Component\HttpKernel\EventListener\ErrorsLoggerListener debug.emergency_logger_listener container Symfony\Component\HttpKernel\EventListener\ErrorsLoggerListener debug.event_dispatcher container Symfony\Component\HttpKernel\Debug\TraceableEventDispatcher debug.stopwatch container Symfony\Component\Stopwatch\Stopwatch debug.templating.engine.php container Symfony\Bundle\FrameworkBundle\Templating\TimedPhpEngine debug.templating.engine.twig n/a alias for templating doctrine container Doctrine\Bundle\DoctrineBundle\Registry doctrine.dbal.connection_factory container Doctrine\Bundle\DoctrineBundle\ConnectionFactory doctrine.dbal.default_connection container stdClass doctrine.orm.default_entity_manager container Doctrine\ORM\EntityManager doctrine.orm.default_manager_configurator container Doctrine\Bundle\DoctrineBundle\ManagerConfigurator doctrine.orm.entity_manager n/a alias for doctrine.orm.default_entity_manager doctrine.orm.validator.unique container Symfony\Bridge\Doctrine\Validator\Constraints\UniqueEntityValidator doctrine.orm.validator_initializer container Symfony\Bridge\Doctrine\Validator\DoctrineInitializer event_dispatcher container Symfony\Component\EventDispatcher\ContainerAwareEventDispatcher file_locator container Symfony\Component\HttpKernel\Config\FileLocator filesystem container Symfony\Component\Filesystem\Filesystem form.csrf_provider container Symfony\Component\Form\Extension\Csrf\CsrfProvider\SessionCsrfProvider form.factory container Symfony\Component\Form\FormFactory form.registry container Symfony\Component\Form\FormRegistry form.resolved_type_factory container Symfony\Component\Form\ResolvedFormTypeFactory form.type.birthday container Symfony\Component\Form\Extension\Core\Type\BirthdayType form.type.button container Symfony\Component\Form\Extension\Core\Type\ButtonType form.type.checkbox container Symfony\Component\Form\Extension\Core\Type\CheckboxType form.type.choice container Symfony\Component\Form\Extension\Core\Type\ChoiceType form.type.collection container Symfony\Component\Form\Extension\Core\Type\CollectionType form.type.country container Symfony\Component\Form\Extension\Core\Type\CountryType form.type.currency container Symfony\Component\Form\Extension\Core\Type\CurrencyType form.type.date container Symfony\Component\Form\Extension\Core\Type\DateType form.type.datetime container Symfony\Component\Form\Extension\Core\Type\DateTimeType form.type.email container Symfony\Component\Form\Extension\Core\Type\EmailType form.type.entity container Symfony\Bridge\Doctrine\Form\Type\EntityType form.type.file container Symfony\Component\Form\Extension\Core\Type\FileType form.type.form container Symfony\Component\Form\Extension\Core\Type\FormType form.type.hidden container Symfony\Component\Form\Extension\Core\Type\HiddenType form.type.integer container Symfony\Component\Form\Extension\Core\Type\IntegerType form.type.language container Symfony\Component\Form\Extension\Core\Type\LanguageType form.type.locale container Symfony\Component\Form\Extension\Core\Type\LocaleType form.type.money container Symfony\Component\Form\Extension\Core\Type\MoneyType form.type.number container Symfony\Component\Form\Extension\Core\Type\NumberType form.type.password container Symfony\Component\Form\Extension\Core\Type\PasswordType form.type.percent container Symfony\Component\Form\Extension\Core\Type\PercentType form.type.radio container Symfony\Component\Form\Extension\Core\Type\RadioType form.type.repeated container Symfony\Component\Form\Extension\Core\Type\RepeatedType form.type.reset container Symfony\Component\Form\Extension\Core\Type\ResetType form.type.search container Symfony\Component\Form\Extension\Core\Type\SearchType form.type.submit container Symfony\Component\Form\Extension\Core\Type\SubmitType form.type.text container Symfony\Component\Form\Extension\Core\Type\TextType form.type.textarea container Symfony\Component\Form\Extension\Core\Type\TextareaType form.type.time container Symfony\Component\Form\Extension\Core\Type\TimeType form.type.timezone container Symfony\Component\Form\Extension\Core\Type\TimezoneType form.type.url container Symfony\Component\Form\Extension\Core\Type\UrlType form.type_extension.csrf container Symfony\Component\Form\Extension\Csrf\Type\FormTypeCsrfExtension form.type_extension.form.http_foundation container Symfony\Component\Form\Extension\HttpFoundation\Type\FormTypeHttpFoundationExtension form.type_extension.form.validator container Symfony\Component\Form\Extension\Validator\Type\FormTypeValidatorExtension form.type_extension.repeated.validator container Symfony\Component\Form\Extension\Validator\Type\RepeatedTypeValidatorExtension form.type_extension.submit.validator container Symfony\Component\Form\Extension\Validator\Type\SubmitTypeValidatorExtension form.type_guesser.doctrine container Symfony\Bridge\Doctrine\Form\DoctrineOrmTypeGuesser form.type_guesser.validator container Symfony\Component\Form\Extension\Validator\ValidatorTypeGuesser fragment.handler container Symfony\Component\HttpKernel\Fragment\FragmentHandler fragment.listener container Symfony\Component\HttpKernel\EventListener\FragmentListener fragment.renderer.hinclude container Symfony\Bundle\FrameworkBundle\Fragment\ContainerAwareHIncludeFragmentRenderer fragment.renderer.inline container Symfony\Component\HttpKernel\Fragment\InlineFragmentRenderer http_kernel container Symfony\Component\HttpKernel\DependencyInjection\ContainerAwareHttpKernel kernel container locale_listener container Symfony\Component\HttpKernel\EventListener\LocaleListener logger container Symfony\Bridge\Monolog\Logger mailer n/a alias for swiftmailer.mailer.default monolog.handler.chromephp container Symfony\Bridge\Monolog\Handler\ChromePhpHandler monolog.handler.debug container Symfony\Bridge\Monolog\Handler\DebugHandler monolog.handler.firephp container Symfony\Bridge\Monolog\Handler\FirePHPHandler monolog.handler.main container Monolog\Handler\StreamHandler monolog.logger.deprecation container Symfony\Bridge\Monolog\Logger monolog.logger.doctrine container Symfony\Bridge\Monolog\Logger monolog.logger.emergency container Symfony\Bridge\Monolog\Logger monolog.logger.event container Symfony\Bridge\Monolog\Logger monolog.logger.profiler container Symfony\Bridge\Monolog\Logger monolog.logger.request container Symfony\Bridge\Monolog\Logger monolog.logger.router container Symfony\Bridge\Monolog\Logger monolog.logger.security container Symfony\Bridge\Monolog\Logger monolog.logger.templating container Symfony\Bridge\Monolog\Logger profiler container Symfony\Component\HttpKernel\Profiler\Profiler profiler_listener container Symfony\Component\HttpKernel\EventListener\ProfilerListener property_accessor container Symfony\Component\PropertyAccess\PropertyAccessor request request response_listener container Symfony\Component\HttpKernel\EventListener\ResponseListener router container Symfony\Bundle\FrameworkBundle\Routing\Router router_listener container Symfony\Component\HttpKernel\EventListener\RouterListener routing.loader container Symfony\Bundle\FrameworkBundle\Routing\DelegatingLoader security.context container Symfony\Component\Security\Core\SecurityContext security.encoder_factory container Symfony\Component\Security\Core\Encoder\EncoderFactory security.firewall container Symfony\Component\Security\Http\Firewall security.firewall.map.context.dev container Symfony\Bundle\SecurityBundle\Security\FirewallContext security.firewall.map.context.login container Symfony\Bundle\SecurityBundle\Security\FirewallContext security.firewall.map.context.rest container Symfony\Bundle\SecurityBundle\Security\FirewallContext security.firewall.map.context.secured_area container Symfony\Bundle\SecurityBundle\Security\FirewallContext security.rememberme.response_listener container Symfony\Component\Security\Http\RememberMe\ResponseListener security.secure_random container Symfony\Component\Security\Core\Util\SecureRandom security.validator.user_password container Symfony\Component\Security\Core\Validator\Constraints\UserPasswordValidator sensio.distribution.webconfigurator n/a alias for sensio_distribution.webconfigurator sensio_distribution.webconfigurator container Sensio\Bundle\DistributionBundle\Configurator\Configurator sensio_framework_extra.cache.listener container Sensio\Bundle\FrameworkExtraBundle\EventListener\CacheListener sensio_framework_extra.controller.listener container Sensio\Bundle\FrameworkExtraBundle\EventListener\ControllerListener sensio_framework_extra.converter.datetime container Sensio\Bundle\FrameworkExtraBundle\Request\ParamConverter\DateTimeParamConverter sensio_framework_extra.converter.doctrine.orm container Sensio\Bundle\FrameworkExtraBundle\Request\ParamConverter\DoctrineParamConverter sensio_framework_extra.converter.listener container Sensio\Bundle\FrameworkExtraBundle\EventListener\ParamConverterListener sensio_framework_extra.converter.manager container Sensio\Bundle\FrameworkExtraBundle\Request\ParamConverter\ParamConverterManager sensio_framework_extra.view.guesser container Sensio\Bundle\FrameworkExtraBundle\Templating\TemplateGuesser sensio_framework_extra.view.listener container Sensio\Bundle\FrameworkExtraBundle\EventListener\TemplateListener service_container container session container Symfony\Component\HttpFoundation\Session\Session session.handler container Symfony\Component\HttpFoundation\Session\Storage\Handler\NativeFileSessionHandler session.storage n/a alias for session.storage.native session.storage.filesystem container Symfony\Component\HttpFoundation\Session\Storage\MockFileSessionStorage session.storage.native container Symfony\Component\HttpFoundation\Session\Storage\NativeSessionStorage session.storage.php_bridge container Symfony\Component\HttpFoundation\Session\Storage\PhpBridgeSessionStorage session_listener container Symfony\Bundle\FrameworkBundle\EventListener\SessionListener streamed_response_listener container Symfony\Component\HttpKernel\EventListener\StreamedResponseListener swiftmailer.email_sender.listener container Symfony\Bundle\SwiftmailerBundle\EventListener\EmailSenderListener swiftmailer.mailer n/a alias for swiftmailer.mailer.default swiftmailer.mailer.default container Swift_Mailer swiftmailer.mailer.default.plugin.messagelogger container Swift_Plugins_MessageLogger swiftmailer.mailer.default.spool container Swift_FileSpool swiftmailer.mailer.default.transport container Swift_Transport_SpoolTransport swiftmailer.mailer.default.transport.real container Swift_Transport_EsmtpTransport swiftmailer.plugin.messagelogger n/a alias for swiftmailer.mailer.default.plugin.messagelogger swiftmailer.spool n/a alias for swiftmailer.mailer.default.spool swiftmailer.transport n/a alias for swiftmailer.mailer.default.transport swiftmailer.transport.real n/a alias for swiftmailer.mailer.default.transport.real templating container Symfony\Bundle\TwigBundle\Debug\TimedTwigEngine templating.asset.package_factory container Symfony\Bundle\FrameworkBundle\Templating\Asset\PackageFactory templating.filename_parser container Symfony\Bundle\FrameworkBundle\Templating\TemplateFilenameParser templating.globals container Symfony\Bundle\FrameworkBundle\Templating\GlobalVariables templating.helper.actions container Symfony\Bundle\FrameworkBundle\Templating\Helper\ActionsHelper templating.helper.assets request Symfony\Component\Templating\Helper\CoreAssetsHelper templating.helper.code container Symfony\Bundle\FrameworkBundle\Templating\Helper\CodeHelper templating.helper.form container Symfony\Bundle\FrameworkBundle\Templating\Helper\FormHelper templating.helper.logout_url container Symfony\Bundle\SecurityBundle\Templating\Helper\LogoutUrlHelper templating.helper.request container Symfony\Bundle\FrameworkBundle\Templating\Helper\RequestHelper templating.helper.router container Symfony\Bundle\FrameworkBundle\Templating\Helper\RouterHelper templating.helper.security container Symfony\Bundle\SecurityBundle\Templating\Helper\SecurityHelper templating.helper.session container Symfony\Bundle\FrameworkBundle\Templating\Helper\SessionHelper templating.helper.slots container Symfony\Component\Templating\Helper\SlotsHelper templating.helper.translator container Symfony\Bundle\FrameworkBundle\Templating\Helper\TranslatorHelper templating.loader container Symfony\Bundle\FrameworkBundle\Templating\Loader\FilesystemLoader templating.name_parser container Symfony\Bundle\FrameworkBundle\Templating\TemplateNameParser translation.dumper.csv container Symfony\Component\Translation\Dumper\CsvFileDumper translation.dumper.ini container Symfony\Component\Translation\Dumper\IniFileDumper translation.dumper.mo container Symfony\Component\Translation\Dumper\MoFileDumper translation.dumper.php container Symfony\Component\Translation\Dumper\PhpFileDumper translation.dumper.po container Symfony\Component\Translation\Dumper\PoFileDumper translation.dumper.qt container Symfony\Component\Translation\Dumper\QtFileDumper translation.dumper.res container Symfony\Component\Translation\Dumper\IcuResFileDumper translation.dumper.xliff container Symfony\Component\Translation\Dumper\XliffFileDumper translation.dumper.yml container Symfony\Component\Translation\Dumper\YamlFileDumper translation.extractor container Symfony\Component\Translation\Extractor\ChainExtractor translation.extractor.php container Symfony\Bundle\FrameworkBundle\Translation\PhpExtractor translation.loader container Symfony\Bundle\FrameworkBundle\Translation\TranslationLoader translation.loader.csv container Symfony\Component\Translation\Loader\CsvFileLoader translation.loader.dat container Symfony\Component\Translation\Loader\IcuResFileLoader translation.loader.ini container Symfony\Component\Translation\Loader\IniFileLoader translation.loader.mo container Symfony\Component\Translation\Loader\MoFileLoader translation.loader.php container Symfony\Component\Translation\Loader\PhpFileLoader translation.loader.po container Symfony\Component\Translation\Loader\PoFileLoader translation.loader.qt container Symfony\Component\Translation\Loader\QtFileLoader translation.loader.res container Symfony\Component\Translation\Loader\IcuResFileLoader translation.loader.xliff container Symfony\Component\Translation\Loader\XliffFileLoader translation.loader.yml container Symfony\Component\Translation\Loader\YamlFileLoader translation.writer container Symfony\Component\Translation\Writer\TranslationWriter translator n/a alias for translator.default translator.default container Symfony\Bundle\FrameworkBundle\Translation\Translator twig container Twig_Environment twig.controller.exception container Symfony\Bundle\TwigBundle\Controller\ExceptionController twig.exception_listener container Symfony\Component\HttpKernel\EventListener\ExceptionListener twig.loader container Symfony\Bundle\TwigBundle\Loader\FilesystemLoader twig.translation.extractor container Symfony\Bridge\Twig\Translation\TwigExtractor uri_signer container Symfony\Component\HttpKernel\UriSigner bla_orm.listener container Bla\OrmBundle\EventListener\UserManager validator container Symfony\Component\Validator\Validator web_profiler.controller.exception container Symfony\Bundle\WebProfilerBundle\Controller\ExceptionController web_profiler.controller.profiler container Symfony\Bundle\WebProfilerBundle\Controller\ProfilerController web_profiler.controller.router container Symfony\Bundle\WebProfilerBundle\Controller\RouterController web_profiler.debug_toolbar container Symfony\Bundle\WebProfilerBundle\EventListener\WebDebugToolbarListener Update It seems that the listener is not invoked when an updateAction, generated by generate:doctrine:crud has taken place though. At another part of the code the lister seems to be invoked. Though, there are both Controller types and both us $em->persist($something); $em->flush(); to save the changes. I would expect that in both cases the listener is invoked.

    Read the article

  • Sun Fire X4800 M2 Delivers World Record TPC-C for x86 Systems

    - by Brian
    Oracle's Sun Fire X4800 M2 server equipped with eight 2.4 GHz Intel Xeon Processor E7-8870 chips obtained a result of 5,055,888 tpmC on the TPC-C benchmark. This result is a world record for x86 servers. Oracle demonstrated this world record database performance running Oracle Database 11g Release 2 Enterprise Edition with Partitioning. The Sun Fire X4800 M2 server delivered a new x86 TPC-C world record of 5,055,888 tpmC with a price performance of $0.89/tpmC using Oracle Database 11g Release 2. This configuration is available 06/26/12. The Sun Fire X4800 M2 server delivers 3.0x times better performance than the next 8-processor result, an IBM System p 570 equipped with POWER6 processors. The Sun Fire X4800 M2 server has 3.1x times better price/performance than the 8-processor 4.7GHz POWER6 IBM System p 570. The Sun Fire X4800 M2 server has 1.6x times better performance than the 4-processor IBM x3850 X5 system equipped with Intel Xeon processors. This is the first TPC-C result on any system using eight Intel Xeon Processor E7-8800 Series chips. The Sun Fire X4800 M2 server is the first x86 system to get over 5 million tpmC. The Oracle solution utilized Oracle Linux operating system and Oracle Database 11g Enterprise Edition Release 2 with Partitioning to produce the x86 world record TPC-C benchmark performance. Performance Landscape Select TPC-C results (sorted by tpmC, bigger is better) System p/c/t tpmC Price/tpmC Avail Database MemorySize Sun Fire X4800 M2 8/80/160 5,055,888 0.89 USD 6/26/2012 Oracle 11g R2 4 TB IBM x3850 X5 4/40/80 3,014,684 0.59 USD 7/11/2011 DB2 ESE 9.7 3 TB IBM x3850 X5 4/32/64 2,308,099 0.60 USD 5/20/2011 DB2 ESE 9.7 1.5 TB IBM System p 570 8/16/32 1,616,162 3.54 USD 11/21/2007 DB2 9.0 2 TB p/c/t - processors, cores, threads Avail - availability date Oracle and IBM TPC-C Response times System tpmC Response Time (sec) New Order 90th% Response Time (sec) New Order Average Sun Fire X4800 M2 5,055,888 0.210 0.166 IBM x3850 X5 3,014,684 0.500 0.272 Ratios - Oracle Better 1.6x 1.4x 1.3x Oracle uses average new order response time for comparison between Oracle and IBM. Graphs of Oracle's and IBM's response times for New-Order can be found in the full disclosure reports on TPC's website TPC-C Official Result Page. Configuration Summary and Results Hardware Configuration: Server Sun Fire X4800 M2 server 8 x 2.4 GHz Intel Xeon Processor E7-8870 4 TB memory 8 x 300 GB 10K RPM SAS internal disks 8 x Dual port 8 Gbs FC HBA Data Storage 10 x Sun Fire X4270 M2 servers configured as COMSTAR heads, each with 1 x 3.06 GHz Intel Xeon X5675 processor 8 GB memory 10 x 2 TB 7.2K RPM 3.5" SAS disks 2 x Sun Storage F5100 Flash Array storage (1.92 TB each) 1 x Brocade 5300 switches Redo Storage 2 x Sun Fire X4270 M2 servers configured as COMSTAR heads, each with 1 x 3.06 GHz Intel Xeon X5675 processor 8 GB memory 11 x 2 TB 7.2K RPM 3.5" SAS disks Clients 8 x Sun Fire X4170 M2 servers, each with 2 x 3.06 GHz Intel Xeon X5675 processors 48 GB memory 2 x 300 GB 10K RPM SAS disks Software Configuration: Oracle Linux (Sun Fire 4800 M2) Oracle Solaris 11 Express (COMSTAR for Sun Fire X4270 M2) Oracle Solaris 10 9/10 (Sun Fire X4170 M2) Oracle Database 11g Release 2 Enterprise Edition with Partitioning Oracle iPlanet Web Server 7.0 U5 Tuxedo CFS-R Tier 1 Results: System: Sun Fire X4800 M2 tpmC: 5,055,888 Price/tpmC: 0.89 USD Available: 6/26/2012 Database: Oracle Database 11g Cluster: no New Order Average Response: 0.166 seconds Benchmark Description TPC-C is an OLTP system benchmark. It simulates a complete environment where a population of terminal operators executes transactions against a database. The benchmark is centered around the principal activities (transactions) of an order-entry environment. These transactions include entering and delivering orders, recording payments, checking the status of orders, and monitoring the level of stock at the warehouses. Key Points and Best Practices Oracle Database 11g Release 2 Enterprise Edition with Partitioning scales easily to this high level of performance. COMSTAR (Common Multiprotocol SCSI Target) is the software framework that enables an Oracle Solaris host to serve as a SCSI Target platform. COMSTAR uses a modular approach to break the huge task of handling all the different pieces in a SCSI target subsystem into independent functional modules which are glued together by the SCSI Target Mode Framework (STMF). The modules implementing functionality at SCSI level (disk, tape, medium changer etc.) are not required to know about the underlying transport. And the modules implementing the transport protocol (FC, iSCSI, etc.) are not aware of the SCSI-level functionality of the packets they are transporting. The framework hides the details of allocation providing execution context and cleanup of SCSI commands and associated resources and simplifies the task of writing the SCSI or transport modules. Oracle iPlanet Web Server middleware is used for the client tier of the benchmark. Each web server instance supports more than a quarter-million users while satisfying the response time requirement from the TPC-C benchmark. See Also Oracle Press Release -- Sun Fire X4800 M2 TPC-C Executive Summary tpc.org Complete Sun Fire X4800 M2 TPC-C Full Disclosure Report tpc.org Transaction Processing Performance Council (TPC) Home Page Ideas International Benchmark Page Sun Fire X4800 M2 Server oracle.com OTN Oracle Linux oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Sun Storage F5100 Flash Array oracle.com OTN Disclosure Statement TPC Benchmark C, tpmC, and TPC-C are trademarks of the Transaction Processing Performance Council (TPC). Sun Fire X4800 M2 (8/80/160) with Oracle Database 11g Release 2 Enterprise Edition with Partitioning, 5,055,888 tpmC, $0.89 USD/tpmC, available 6/26/2012. IBM x3850 X5 (4/40/80) with DB2 ESE 9.7, 3,014,684 tpmC, $0.59 USD/tpmC, available 7/11/2011. IBM x3850 X5 (4/32/64) with DB2 ESE 9.7, 2,308,099 tpmC, $0.60 USD/tpmC, available 5/20/2011. IBM System p 570 (8/16/32) with DB2 9.0, 1,616,162 tpmC, $3.54 USD/tpmC, available 11/21/2007. Source: http://www.tpc.org/tpcc, results as of 7/15/2011.

    Read the article

  • How to Sync Any Folder With SkyDrive on Windows 8.1

    - by Chris Hoffman
    Before Windows 8.1, it was possible to sync any folder on your computer with SkyDrive using symbolic links. This method no longer works now that SkyDrive is baked into Windows 8.1, but there are other tricks you can use. Creating a symbolic link or directory junction inside your SkyDrive folder will give you an empty folder in your SkyDrive cloud storage. Confusingly, the files will appear inside the SkyDrive Modern app as if they were being synced, but they aren’t. The Solution With SkyDrive refusing to understand and accept symbolic links in its own folder, the best option is probably to use symbolic links anyway — but in reverse. For example, let’s say you have a program that automatically saves important data to a folder anywhere on your hard drive — whether it’s C:\Users\USER\Documents\, C:\Program\Data, or anywhere else. Rather than trying to trick SkyDrive into understanding a symbolic link, we could instead move the actual folder itself to SkyDrive and then use a symbolic link at the folder’s original location to trick the original program. This may not work for every single program out there. But it will likely work for most programs, which use standard Windows API calls to access folders and save files. We’re just flipping the old solution here — we can’t trick SkyDrive anymore, so let’s try to trick other programs instead. Moving a Folder and Creating a Symbolic Link First, ensure no program is using the external folder. For example, if it’s a program data or settings folder, close the program that’s using the folder. Next, simply move the folder to your SkyDrive folder. Right-click the external folder, select Cut, go to the SkyDrive folder, right-click and select Paste. The folder will now be located in the SkyDrive folder itself, so it will sync normally. Next, open a Command Prompt window as Administrator. Right-click the Start button on the taskbar or press Windows Key + X and select Command Prompt (Administrator) to open it. Run the following command to create a symbolic link at the original location of the folder: mklink /d “C:\Original\Folder\Location” “C:\Users\NAME\SkyDrive\FOLDERNAME\” Enter the correct paths for the exact location of the original folder and the current location of the folder in your SkyDrive. Windows will then create a symbolic link at the folder’s original location. Most programs should hopefully be tricked by this symbolic location, saving their files directly to SkyDrive. You can test this yourself. Put a file into the folder at its original location. It will be saved to SkyDrive and sync normally, appearing in your SkyDrive storage online. One downside here is that you won’t be able to save a file onto SkyDrive without it taking up space on the same hard drive SkyDrive is on. You won’t be able to scatter folders across multiple hard drives and sync them all. However, you could always change the location of the SkyDrive folder on Windows 8.1 and put it on a drive with a larger amount of free space. To do this, right-click the SkyDrive folder in File Explorer, select Properties, and use the options on the Location tab. You could even use Storage Spaces to combine the drives into one larger drive. Automatically Copy the Original Files to SkyDrive Another option would be to run a program that automatically copies files from another folder on your computer to your SkyDrive folder. For example, let’s say you want to sync copies of important log files that a program creates in a specific folder. You could use a program that allows you to schedule automatic folder-mirroring, configuring the program to regularly copy the contents of your log folder to your SkyDrive folder. This may be a useful alternative for some use cases, although it isn’t the same as standard syncing. You’ll end up with two copies of the files taking up space on your system, which won’t be ideal for large files. The files also won’t be instantly uploaded to your SkyDrive storage after they’re created, but only after the scheduled task runs. There are many options for this, including Microsoft’s own SyncToy, which continues to work on Windows 8. If you were using the symbolic link trick to automatically sync copies of PC game save files with SkyDrive, you could just install GameSave Manager. It can be configured to automatically create backup copies of your computer’s PC game save files on a schedule, saving them to SkyDrive where they’ll be synced and backed up online. SkyDrive support was completely rewritten for Windows 8.1, so it’s not surprising that this trick no longer works. The ability to use symbolic links in previous versions of SkyDrive was never officially supported, so it’s not surprising to see it break after a rewrite. None of the methods above are as convenient and quick as the old symbolic link method, but they’re the best we can do with the SkyDrive integration Microsoft has given us in Windows 8.1. It’s still possible to use symbolic links to easily sync other folders with competing cloud storage services like Dropbox and Google Drive, so you may want to consider switching away from SkyDrive if this feature is critical to you.     

    Read the article

  • External USB 3 drive not recognized

    - by ilan123
    Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

    Read the article

  • #OOW 2012 @PARIS...talking Oracle and Clouds, and Optimized Datacenter

    - by Eric Bezille
    For those of you who want to get most out of Oracle technologies to evolve your IT to the Next Wave, I encourage you to register to the up coming Oracle Optimized Datacenter event that will take place in Paris on November 28th. You will get the opportunity to exchange with Oracle experts and customers having successfully evolve their IT by leveraging Oracle technologies. You will also get the latest news on some of the Oracle systems announcements made during OOW 2012. During this event we will make an update about Oracle and Clouds, from private to public and hybrid models. So in preparing this session, I thought it was a good start to make a status of Cloud Computing in France, and CIO requirements in particular. Starting in 2009 with the first Cloud Camp in Paris, the market has evolved, but the basics are still the same : think hybrid. From Traditional IT to Clouds One size doesn't fit all, and for big companies having already an IT in place, there will be parts eligible to external (public) cloud, and parts that would be required to stay inside the firewalls, so ability to integrate both side is key.  None the less, one of the major impact of Cloud Computing trend on IT, reported by Forrester, is the pressure it makes on CIO to evolve towards the same model that end-users are now used to in their day to day life, where self-service and flexibility are paramount. This is what is driving IT to transform itself toward "a Global Service Provider", or for some as "IT "is" the Business" (see : Gartner Identifies Four Futures for IT and CIO), and for both models toward a Private Cloud Service Provider. In this journey, there is still a big difference between most of existing external Cloud and a firm IT : the number of applications that a CIO has to manage. Most cloud providers today are overly specialized, but at the end of the day, there are really few business processes that rely on only one application. So CIOs has to combine everything together external and internal. And for the internal parts that they will have to make them evolve to a Private Cloud, the scope can be very large. This will often require CIOs to evolve from their traditional approach to more disruptive ones, the time has come to introduce new standards and processes, if they want to succeed. So let's have a look at the different Cloud models, what type of users they are addressing, what value they bring and most importantly what needs to be done by the  Cloud Provider, and what is left over to the user. IaaS, PaaS, SaaS : what's provided and what needs to be done First of all the Cloud Provider will have to provide all the infrastructure needed to deliver the service. And the more value IT will want to provide, the more IT will have to deliver and integrate : from disks to applications. As we can see in the above picture, providing pure IaaS, left a lot to cover for the end-user, that’s why the end-user targeted by this Cloud Service is IT people. If you want to bring more value to developers, you need to provide to them a development platform ready to use, which is what PaaS is standing for, by providing not only the processors power, storage and OS, but also the Database and Middleware platform. SaaS being the last mile of the Cloud, providing an application ready to use by business users, the remaining part for the end-users being configuring and specifying the application for their specific usage. In addition to that, there are common challenges encompassing all type of Cloud Services : Security : covering all aspect, not only of users management but also data flows and data privacy Charge back : measuring what is used and by whom Application management : providing capabilities not only to deploy, but also to upgrade, from OS for IaaS, Database, and Middleware for PaaS, to a full Business Application for SaaS. Scalability : ability to evolve ALL the components of the Cloud Provider stack as needed Availability : ability to cover “always on” requirements Efficiency : providing a infrastructure that leverage shared resources in an efficient way and still comply to SLA (performances, availability, scalability, and ability to evolve) Automation : providing the orchestration of ALL the components in all service life-cycle (deployment, growth & shrink (elasticity), upgrades,...) Management : providing monitoring, configuring and self-service up to the end-users Oracle Strategy and Clouds For CIOs to succeed in their Private Cloud implementation, means that they encompass all those aspects for each component life-cycle that they selected to build their Cloud. That’s where a multi-vendors layered approach comes short in terms of efficiency. That’s the reason why Oracle focus on taking care of all those aspects directly at Engineering level, to truly provide efficient Cloud Services solutions for IaaS, PaaS and SaaS. We are going as far as embedding software functions in hardware (storage, processor level,...) to ensure the best SLA with the highest efficiency. The beauty of it, as we rely on standards, is that the Oracle components that you are running today in-house, are exactly the same that we are using to build Clouds, bringing you flexibility, reversibility and fast path to adoption. With Oracle Engineered Systems (Exadata, Exalogic & SPARC SuperCluster, more specifically, when talking about Cloud), we are delivering all those components hardware and software already engineered together at Oracle factory, with a single pane of glace for the management of ALL the components through Oracle Enterprise Manager, and with high-availability, scalability and ability to evolve by design. To give you a feeling of what does that bring in terms just of implementation project timeline, for example with Oracle SPARC SuperCluster, we have a consistent track of record to have the system plug into existing Datacenter and ready in a week. This includes Oracle Database, OS, virtualization, Database Storage (Exadata Storage Cells in this case), Application Storage, and all network configuration. This strategy enable CIOs to very quickly build Cloud Services, taking out not only the complexity of integrating everything together but also taking out the automation and evolution complexity and cost. I invite you to discuss all those aspect in regards of your particular context face2face on November 28th.

    Read the article

  • Local LINQtoSQL Database For Your Windows Phone 7 Application

    - by Tim Murphy
    There aren’t many applications that are of value without having some for of data store.  In Windows Phone development we have a few options.  You can store text directly to isolated storage.  You can also use a number of third party libraries to create or mimic databases in isolated storage.  With Mango we gained the ability to have a native .NET database approach which uses LINQ to SQL.  In this article I will try to bring together the components needed to implement this last type of data store and fill in some of the blanks that I think other articles have left out. Defining A Database The first things you are going to need to do is define classes that represent your tables and a data context class that is used as the overall database definition.  The table class consists of column definitions as you would expect.  They can have relationships and constraints as with any relational DBMS.  Below is an example of a table definition. First you will need to add some assembly references to the code file. using System.ComponentModel;using System.Data.Linq;using System.Data.Linq.Mapping; You can then add the table class and its associated columns.  It needs to implement INotifyPropertyChanged and INotifyPropertyChanging.  Each level of the class needs to be decorated with the attribute appropriate for that part of the definition.  Where the class represents the table the properties represent the columns.  In this example you will see that the column is marked as a primary key and not nullable with a an auto generated value. You will also notice that the in the column property’s set method It uses the NotifyPropertyChanging and NotifyPropertyChanged methods in order to make sure that the proper events are fired. [Table]public class MyTable: INotifyPropertyChanged, INotifyPropertyChanging{ public event PropertyChangedEventHandler PropertyChanged; private void NotifyPropertyChanged(string propertyName) { if(PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); } } public event PropertyChangingEventHandler PropertyChanging; private void NotifyPropertyChanging(string propertyName) { if(PropertyChanging != null) { PropertyChanging(this, new PropertyChangingEventArgs(propertyName)); } } private int _TableKey; [Column(IsPrimaryKey = true, IsDbGenerated = true, DbType = "INT NOT NULL Identity", CanBeNull = false, AutoSync = AutoSync.OnInsert)] public int TableKey { get { return _TableKey; } set { NotifyPropertyChanging("TableKey"); _TableKey = value; NotifyPropertyChanged("TableKey"); } } The last part of the database definition that needs to be created is the data context.  This is a simple class that takes an isolated storage location connection string its constructor and then instantiates tables as public properties. public class MyDataContext: DataContext{ public MyDataContext(string connectionString): base(connectionString) { MyRecords = this.GetTable<MyTable>(); } public Table<MyTable> MyRecords;} Creating A New Database Instance Now that we have a database definition it is time to create an instance of the data context within our Windows Phone app.  When your app fires up it should check if the database already exists and create an instance if it does not.  I would suggest that this be part of the constructor of your ViewModel. db = new MyDataContext(connectionString);if(!db.DatabaseExists()){ db.CreateDatabase();} The next thing you have to know is how the connection string for isolated storage should be constructed.  The main sticking point I have found is that the database cannot be created unless the file mode is read/write.  You may have different connection strings but the initial one needs to be similar to the following. string connString = "Data Source = 'isostore:/MyApp.sdf'; File Mode = read write"; Using you database Now that you have done all the up front work it is time to put the database to use.  To make your life a little easier and keep proper separation between your view and your viewmodel you should add a couple of methods to the viewmodel.  These will do the CRUD work of your application.  What you will notice is that the SubmitChanges method is the secret sauce in all of the methods that change data. private myDataContext myDb;private ObservableCollection<MyTable> _viewRecords;public ObservableCollection<MyTable> ViewRecords{ get { return _viewRecords; } set { _viewRecords = value; NotifyPropertyChanged("ViewRecords"); }}public void LoadMedstarDbData(){ var tempItems = from MyTable myRecord in myDb.LocalScans select myRecord; ViewRecords = new ObservableCollection<MyTable>(tempItems);}public void SaveChangesToDb(){ myDb.SubmitChanges();}public void AddMyTableItem(MyTable newScan){ myDb.LocalScans.InsertOnSubmit(newScan); myDb.SubmitChanges();}public void DeleteMyTableItem(MyTable newScan){ myDb.LocalScans.DeleteOnSubmit(newScan); myDb.SubmitChanges();} Updating existing database What happens when you need to change the structure of your database?  Unfortunately you have to add code to your application that checks the version of the database which over time will create some pollution in your codes base.  On the other hand it does give you control of the update.  In this example you will see the DatabaseSchemaUpdater in action.  Assuming we added a “Notes” field to the MyTable structure, the following code will check if the database is the latest version and add the field if it isn’t. if(!myDb.DatabaseExists()){ myDb.CreateDatabase();}else{ DatabaseSchemaUpdater dbUdater = myDb.CreateDatabaseSchemaUpdater(); if(dbUdater.DatabaseSchemaVersion < 2) { dbUdater.AddColumn<MyTable>("Notes"); dbUdater.DatabaseSchemaVersion = 2; dbUdater.Execute(); }} Summary This approach does take a fairly large amount of work, but I think the end product is robust and very native for .NET developers.  It turns out to be worth the investment. del.icio.us Tags: Windows Phone,Windows Phone 7,LINQ to SQL,LINQ,Database,Isolated Storage

    Read the article

  • ESX3.5 Cluster & MD3000i -- Both servers see iSCSI Targets, Only one server can use partition.

    - by GruffTech
    Alright. First and foremost, Warning. This is a bigger-then-normal question. I like to be thorough and try to eliminate all possible "easymode" answers, as well as give everyone a feel of what i've tried. I've included several images of our setup and the problem it is having.. TLDR Version: So I've followed the guides located here: ESX Deployment Guide V1 this is the guide Dell has sent me to setup two ESX3.5 servers mounting a Dell MD3000i. It doesn't work. Both servers can't use the same storage partition on the MD3000. Both servers see it, but only one server can actually use it. (that server being whatever server created the partition on the target.) Both ESX servers are members of the Host Group. Full Version I have 2 ESX3.5 Servers (10.0.7.102, also called EPI2, and 10.0.7.103, also called EPI3.) connected to a iSCSI SAN Device (Dell MD3000i). Both ESX servers can "scan" the SAN and see the LUNS. Part One: MD3000i Storage On the MD3000i, Both servers are in my host group. I have two partitions, VM1 and VM2, both 1.6TB (vmware doesn't like anything past 2tb.) And you can even see that the ESX servers are targetting the MD3000 just fine. Part Two: The ESX Servers Figure 1. So as you can see above, Both ESX Servers (10.0.7.102 and 10.0.7.103) are able to see and scan the MD3000i SAN. Figure 2. Above is the storage both servers see. I created the storage partition on EPI2 (102). I then Extended the partition to include the second LUN for a grand total of 3.27 TB of storage. When i "rescan" on 103 (the server not mounting the partition), I get the below log in log/messages. Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). being the only line that grabs my attentions. (EPI3 is the server name) Mar 11 10:41:04 epi3 vmkiscsid[5436]: Connected to Discovery Address 192.168.130.101 Mar 11 10:41:04 epi3 vmkiscsid[5437]: Connected to Discovery Address 192.168.130.102 Mar 11 10:41:04 epi3 vmkiscsid[5438]: Connected to Discovery Address 192.168.131.101 Mar 11 10:41:04 epi3 vmkiscsid[5439]: Connected to Discovery Address 192.168.131.102 Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 0 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdb : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Device id info for sdb: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0xa2 0x0 0x0 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Id for sdb 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0xa2 0x00 0x00 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:17 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: scan_scsis starting finish Mar 11 10:41:17 epi3 kernel: SCSI device sdb: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:17 epi3 kernel: sdb: sdb1 Mar 11 10:41:17 epi3 kernel: scan_scsis done with finish Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 1 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdc : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Device id info for sdc: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0x86 0x0 0x0 0xd 0xb7 0x4d 0x75 0xf2 0x77 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Id for sdc 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0x86 0x00 0x00 0x0d 0xb7 0x4d 0x75 0xf2 0x77 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:18 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: Attached scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: scan_scsis starting finish Mar 11 10:41:18 epi3 kernel: SCSI device sdc: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:18 epi3 kernel: sdc: sdc1 Mar 11 10:41:18 epi3 kernel: scan_scsis done with finish Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). Mar 11 10:41:18 epi3 kernel: scsi singledevice 1 0 0 0 Things I've Tried: Removing iSCSI targets from only 103, disabling iSCSI, rebooting, enabled iSCSI, re-adding targets, rescan. Same result. Removing partition on 102, Formatted partition on 103 instead. Same result, except flipped. 103 can use storage, 102 can not. Starting Over. Removing all iSCSI Targets on both ESX Boxes, disabling iSCSI, turning off the firewall for iSCSI, rebooting ESX. Then on the MD3000, Removed the Host Group, Removed the Host-to-Virtual Mappings, Restarted the SAN. Followed the Documentation again, same result. Both servers see the storage, but only one server can use it. Disabling and Re-enabling VMware DRS and HA. Same result. Flat-out turning off VMware DRS and HA, and doing the "start over" step to see if maybe that borked it. Same Result. I'm kinda loosing my mind here, Everything i read online says "just partition it and if the ESX boxes can see the targets, it just works".... well crap. Any ideas, any other things to try? Can anyone atleast point me in the right direction? I'm really tired of working from 1am til 4am (our maintenance hours)

    Read the article

  • Installing vim7.2 on Solaris Sparc 10 as non-root

    - by Tobbe
    I'm trying to install vim to $HOME/bin by compiling the sources. ./configure --prefix=$home/bin seems to work, but when running make I get: > make Starting make in the src directory. If there are problems, cd to the src directory and run make there cd src && make first gcc -c -I. -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -I/usr/openwin/include -o objects/buffer.o buffer.c In file included from buffer.c:28: vim.h:41: error: syntax error before ':' token In file included from os_unix.h:29, from vim.h:245, from buffer.c:28: /usr/include/sys/stat.h:251: error: syntax error before "blksize_t" /usr/include/sys/stat.h:255: error: syntax error before '}' token /usr/include/sys/stat.h:309: error: syntax error before "blksize_t" /usr/include/sys/stat.h:310: error: conflicting types for 'st_blocks' /usr/include/sys/stat.h:252: error: previous declaration of 'st_blocks' was here /usr/include/sys/stat.h:313: error: syntax error before '}' token In file included from /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:132, from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/sys/siginfo.h:259: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:292: error: syntax error before '}' token /usr/include/sys/siginfo.h:294: error: syntax error before '}' token /usr/include/sys/siginfo.h:390: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:398: error: conflicting types for '__fault' /usr/include/sys/siginfo.h:267: error: previous declaration of '__fault' was here /usr/include/sys/siginfo.h:404: error: conflicting types for '__file' /usr/include/sys/siginfo.h:273: error: previous declaration of '__file' was here /usr/include/sys/siginfo.h:420: error: conflicting types for '__prof' /usr/include/sys/siginfo.h:287: error: previous declaration of '__prof' was here /usr/include/sys/siginfo.h:424: error: conflicting types for '__rctl' /usr/include/sys/siginfo.h:291: error: previous declaration of '__rctl' was here /usr/include/sys/siginfo.h:426: error: syntax error before '}' token /usr/include/sys/siginfo.h:428: error: syntax error before '}' token /usr/include/sys/siginfo.h:432: error: syntax error before "k_siginfo_t" /usr/include/sys/siginfo.h:437: error: syntax error before '}' token In file included from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:173: error: syntax error before "siginfo_t" In file included from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/signal.h:111: error: syntax error before "siginfo_t" /usr/include/signal.h:113: error: syntax error before "siginfo_t" buffer.c: In function `buflist_new': buffer.c:1502: error: storage size of 'st' isn't known buffer.c: In function `buflist_findname': buffer.c:1989: error: storage size of 'st' isn't known buffer.c: In function `setfname': buffer.c:2578: error: storage size of 'st' isn't known buffer.c: In function `otherfile_buf': buffer.c:2836: error: storage size of 'st' isn't known buffer.c: In function `buf_setino': buffer.c:2874: error: storage size of 'st' isn't known buffer.c: In function `buf_same_ino': buffer.c:2894: error: dereferencing pointer to incomplete type buffer.c:2895: error: dereferencing pointer to incomplete type *** Error code 1 make: Fatal error: Command failed for target `objects/buffer.o' Current working directory /home/xluntor/vim72/src *** Error code 1 make: Fatal error: Command failed for target `first' How do I fix the make errors? Or is there another way to install vim as non-root? Thanks in advance EDIT: I took a look at the google groups link Sarah posted. The "Compiling Vim" page linked from there was for Linux, so the commands doesn't even work on Solars. But it did hint at logging the output of ./configure to a file, so I did that. Here it is: ./configure output removed. New version further down. Does anyone spot anything critical missing? EDIT 2: So I downloaded the vim package from sunfreeware. I couldn't just install it, since I don't have root privileges, but I was able to extract the package file. This was the file structure in it: `-- SMCvim `-- reloc |-- bin |-- doc | `-- vim `-- share |-- man | `-- man1 `-- vim `-- vim72 |-- autoload | `-- xml |-- colors |-- compiler |-- doc |-- ftplugin |-- indent |-- keymap |-- lang |-- macros | |-- hanoi | |-- life | |-- maze | `-- urm |-- plugin |-- print |-- spell |-- syntax |-- tools `-- tutor I moved the three files (vim, vimtutor, xdd) in SMCvim/reloc/bin to $HOME/bin, so now I can finally run $HOME/bin/vim! But where do I put the "share" directory and its content? EDIT 3: It might also be worth noting that there already exists an install of vim on the system, but it is broken. When I try to run it I get: ld.so.1: vim: fatal: libgtk-1.2.so.0: open failed: No such file or directory "which vim" outputs /opt/local/bin/vim EDIT 4: Trying to compile this on Solaris 10. uname -a SunOS ws005-22 5.10 Generic_141414-10 sun4u sparc SUNW,SPARC-Enterprise New ./configure output: ./configure --prefix=$home/bin ac_cv_sizeof_int=8 --enable-rubyinterp configure: loading cache auto/config.cache checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... unsupported checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/sfw/bin/ggrep checking for egrep... /usr/sfw/bin/ggrep -E checking for library containing strerror... none required checking for gawk... gawk checking for strip... strip checking for ANSI C header files... yes checking for sys/wait.h that is POSIX.1 compatible... no configure: checking for buggy tools... checking for BeOS... no checking for QNX... no checking for Darwin (Mac OS X)... no checking --with-local-dir argument... Defaulting to /usr/local checking --with-vim-name argument... Defaulting to vim checking --with-ex-name argument... Defaulting to ex checking --with-view-name argument... Defaulting to view checking --with-global-runtime argument... no checking --with-modified-by argument... no checking if character set is EBCDIC... no checking --disable-selinux argument... no checking for is_selinux_enabled in -lselinux... no checking --with-features argument... Defaulting to normal checking --with-compiledby argument... no checking --disable-xsmp argument... no checking --disable-xsmp-interact argument... no checking --enable-mzschemeinterp argument... no checking --enable-perlinterp argument... no checking --enable-pythoninterp argument... no checking --enable-tclinterp argument... no checking --enable-rubyinterp argument... yes checking for ruby... /opt/sfw/bin/ruby checking Ruby version... OK checking Ruby header files... /opt/sfw/lib/ruby/1.6/sparc-solaris2.10 checking --enable-cscope argument... no checking --enable-workshop argument... no checking --disable-netbeans argument... no checking for socket in -lsocket... yes checking for gethostbyname in -lnsl... yes checking whether compiling netbeans integration is possible... no checking --enable-sniff argument... no checking --enable-multibyte argument... no checking --enable-hangulinput argument... no checking --enable-xim argument... defaulting to auto checking --enable-fontset argument... no checking for xmkmf... /usr/openwin/bin/xmkmf checking for X... libraries /usr/openwin/lib, headers /usr/openwin/include checking whether -R must be followed by a space... no checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking if X11 header files can be found... yes checking for _XdmcpAuthDoIt in -lXdmcp... no checking for IceOpenConnection in -lICE... yes checking for XpmCreatePixmapFromData in -lXpm... yes checking if X11 header files implicitly declare return values... no checking --enable-gui argument... yes/auto - automatic GUI support checking whether or not to look for GTK... yes checking whether or not to look for GTK+ 2... yes checking whether or not to look for GNOME... no checking whether or not to look for Motif... yes checking whether or not to look for Athena... yes checking whether or not to look for neXtaw... yes checking whether or not to look for Carbon... yes checking --with-gtk-prefix argument... no checking --with-gtk-exec-prefix argument... no checking --disable-gtktest argument... gtk test enabled checking for gtk-config... /opt/local/bin/gtk-config checking for pkg-config... /usr/bin/pkg-config checking for GTK - version = 2.2.0... yes; found version 2.4.9 checking X11/SM/SMlib.h usability... yes checking X11/SM/SMlib.h presence... yes checking for X11/SM/SMlib.h... yes checking X11/xpm.h usability... yes checking X11/xpm.h presence... yes checking for X11/xpm.h... yes checking X11/Sunkeysym.h usability... yes checking X11/Sunkeysym.h presence... yes checking for X11/Sunkeysym.h... yes checking for XIMText in X11/Xlib.h... yes X GUI selected; xim has been enabled checking whether toupper is broken... no checking whether __DATE__ and __TIME__ work... yes checking elf.h usability... yes checking elf.h presence... yes checking for elf.h... yes checking for main in -lelf... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for sys/wait.h that defines union wait... no checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking stdlib.h usability... yes checking stdlib.h presence... yes checking for stdlib.h... yes checking string.h usability... yes checking string.h presence... yes checking for string.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/utsname.h usability... yes checking sys/utsname.h presence... yes checking for sys/utsname.h... yes checking termcap.h usability... yes checking termcap.h presence... yes checking for termcap.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking sgtty.h usability... yes checking sgtty.h presence... yes checking for sgtty.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/types.h usability... yes checking sys/types.h presence... yes checking for sys/types.h... yes checking termio.h usability... yes checking termio.h presence... yes checking for termio.h... yes checking iconv.h usability... yes checking iconv.h presence... yes checking for iconv.h... yes checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking math.h usability... yes checking math.h presence... yes checking for math.h... yes checking unistd.h usability... yes checking unistd.h presence... yes checking for unistd.h... yes checking stropts.h usability... no checking stropts.h presence... yes configure: WARNING: stropts.h: present but cannot be compiled configure: WARNING: stropts.h: check for missing prerequisite headers? configure: WARNING: stropts.h: see the Autoconf documentation configure: WARNING: stropts.h: section "Present But Cannot Be Compiled" configure: WARNING: stropts.h: proceeding with the preprocessor's result configure: WARNING: stropts.h: in the future, the compiler will take precedence checking for stropts.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking sys/systeminfo.h usability... yes checking sys/systeminfo.h presence... yes checking for sys/systeminfo.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking sys/stream.h usability... no checking sys/stream.h presence... yes configure: WARNING: sys/stream.h: present but cannot be compiled configure: WARNING: sys/stream.h: check for missing prerequisite headers? configure: WARNING: sys/stream.h: see the Autoconf documentation configure: WARNING: sys/stream.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/stream.h: proceeding with the preprocessor's result configure: WARNING: sys/stream.h: in the future, the compiler will take precedence checking for sys/stream.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking libc.h usability... no checking libc.h presence... no checking for libc.h... no checking sys/statfs.h usability... yes checking sys/statfs.h presence... yes checking for sys/statfs.h... yes checking poll.h usability... yes checking poll.h presence... yes checking for poll.h... yes checking sys/poll.h usability... yes checking sys/poll.h presence... yes checking for sys/poll.h... yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking libgen.h usability... yes checking libgen.h presence... yes checking for libgen.h... yes checking util/debug.h usability... no checking util/debug.h presence... no checking for util/debug.h... no checking util/msg18n.h usability... no checking util/msg18n.h presence... no checking for util/msg18n.h... no checking frame.h usability... no checking frame.h presence... no checking for frame.h... no checking sys/acl.h usability... yes checking sys/acl.h presence... yes checking for sys/acl.h... yes checking sys/access.h usability... no checking sys/access.h presence... no checking for sys/access.h... no checking sys/sysctl.h usability... no checking sys/sysctl.h presence... no checking for sys/sysctl.h... no checking sys/sysinfo.h usability... yes checking sys/sysinfo.h presence... yes checking for sys/sysinfo.h... yes checking wchar.h usability... yes checking wchar.h presence... yes checking for wchar.h... yes checking wctype.h usability... yes checking wctype.h presence... yes checking for wctype.h... yes checking for sys/ptem.h... no checking for pthread_np.h... no checking strings.h usability... yes checking strings.h presence... yes checking for strings.h... yes checking if strings.h can be included after string.h... yes checking whether gcc needs -traditional... no checking for an ANSI C-conforming const... yes checking for mode_t... yes checking for off_t... yes checking for pid_t... yes checking for size_t... yes checking for uid_t in sys/types.h... yes checking whether time.h and sys/time.h may both be included... yes checking for ino_t... yes checking for dev_t... yes checking for rlim_t... yes checking for stack_t... yes checking whether stack_t has an ss_base field... no checking --with-tlib argument... empty: automatic terminal library selection checking for tgetent in -lncurses... yes checking whether we talk terminfo... yes checking what tgetent() returns for an unknown terminal... zero checking whether termcap.h contains ospeed... yes checking whether termcap.h contains UP, BC and PC... yes checking whether tputs() uses outfuntype... no checking whether sys/select.h and sys/time.h may both be included... yes checking for /dev/ptc... no checking for SVR4 ptys... yes checking for ptyranges... don't know checking default tty permissions/group... can't determine - assume ptys are world accessable world checking return type of signal handlers... void checking for struct sigcontext... no checking getcwd implementation is broken... no checking for bcmp... yes checking for fchdir... yes checking for fchown... yes checking for fseeko... yes checking for fsync... yes checking for ftello... yes checking for getcwd... yes checking for getpseudotty... no checking for getpwnam... yes checking for getpwuid... yes checking for getrlimit... yes checking for gettimeofday... yes checking for getwd... yes checking for lstat... yes checking for memcmp... yes checking for memset... yes checking for nanosleep... no checking for opendir... yes checking for putenv... yes checking for qsort... yes checking for readlink... yes checking for select... yes checking for setenv... yes checking for setpgid... yes checking for setsid... yes checking for sigaltstack... yes checking for sigstack... yes checking for sigset... yes checking for sigsetjmp... yes checking for sigaction... yes checking for sigvec... no checking for strcasecmp... yes checking for strerror... yes checking for strftime... yes checking for stricmp... no checking for strncasecmp... yes checking for strnicmp... no checking for strpbrk... yes checking for strtol... yes checking for tgetent... yes checking for towlower... yes checking for towupper... yes checking for iswupper... yes checking for usleep... yes checking for utime... yes checking for utimes... yes checking for st_blksize... no checking whether stat() ignores a trailing slash... no checking for iconv_open()... yes; with -liconv checking for nl_langinfo(CODESET)... yes checking for strtod in -lm... yes checking for strtod() and other floating point functions... yes checking --disable-acl argument... no checking for acl_get_file in -lposix1e... no checking for acl_get_file in -lacl... no checking for POSIX ACL support... no checking for Solaris ACL support... yes checking for AIX ACL support... no checking --disable-gpm argument... no checking for gpm... no checking --disable-sysmouse argument... no checking for sysmouse... no checking for rename... yes checking for sysctl... not usable checking for sysinfo... not usable checking for sysinfo.mem_unit... no checking for sysconf... yes checking size of int... (cached) 8 checking whether memmove handles overlaps... yes checking for _xpg4_setrunelocale in -lxpg4... no checking how to create tags... ctags -t checking how to run man with a section nr... man -s checking --disable-nls argument... no checking for msgfmt... msgfmt checking for NLS... no "po/Makefile" - disabled checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for dlopen()... yes checking for dlsym()... yes checking setjmp.h usability... yes checking setjmp.h presence... yes checking for setjmp.h... yes checking for GCC 3 or later... yes configure: updating cache auto/config.cache configure: creating auto/config.status config.status: creating auto/config.mk config.status: creating auto/config.h Make: make Starting make in the src directory. If there are problems, cd to the src directory and run make there cd src && make first mkdir objects CC="gcc -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/openwin/include -I/opt/sfw/lib/ruby/1.6/sparc-solaris2.10 " srcdir=. sh ./osdef.sh gcc -c -I. -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -I/usr/openwin/include -I/opt/sfw/lib/ruby/1.6/sparc-solaris2.10 -o objects/buffer.o buffer.c In file included from os_unix.h:29, from vim.h:245, from buffer.c:28: /usr/include/sys/stat.h:251: error: syntax error before "blksize_t" /usr/include/sys/stat.h:255: error: syntax error before '}' token /usr/include/sys/stat.h:309: error: syntax error before "blksize_t" /usr/include/sys/stat.h:310: error: conflicting types for 'st_blocks' /usr/include/sys/stat.h:252: error: previous declaration of 'st_blocks' was here /usr/include/sys/stat.h:313: error: syntax error before '}' token In file included from /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:132, from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/sys/siginfo.h:259: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:292: error: syntax error before '}' token /usr/include/sys/siginfo.h:294: error: syntax error before '}' token /usr/include/sys/siginfo.h:390: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:398: error: conflicting types for '__fault' /usr/include/sys/siginfo.h:267: error: previous declaration of '__fault' was here /usr/include/sys/siginfo.h:404: error: conflicting types for '__file' /usr/include/sys/siginfo.h:273: error: previous declaration of '__file' was here /usr/include/sys/siginfo.h:420: error: conflicting types for '__prof' /usr/include/sys/siginfo.h:287: error: previous declaration of '__prof' was here /usr/include/sys/siginfo.h:424: error: conflicting types for '__rctl' /usr/include/sys/siginfo.h:291: error: previous declaration of '__rctl' was here /usr/include/sys/siginfo.h:426: error: syntax error before '}' token /usr/include/sys/siginfo.h:428: error: syntax error before '}' token /usr/include/sys/siginfo.h:432: error: syntax error before "k_siginfo_t" /usr/include/sys/siginfo.h:437: error: syntax error before '}' token In file included from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:173: error: syntax error before "siginfo_t" In file included from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/signal.h:111: error: syntax error before "siginfo_t" /usr/include/signal.h:113: error: syntax error before "siginfo_t" buffer.c: In function `buflist_new': buffer.c:1502: error: storage size of 'st' isn't known buffer.c: In function `buflist_findname': buffer.c:1989: error: storage size of 'st' isn't known buffer.c: In function `setfname': buffer.c:2578: error: storage size of 'st' isn't known buffer.c: In function `otherfile_buf': buffer.c:2836: error: storage size of 'st' isn't known buffer.c: In function `buf_setino': buffer.c:2874: error: storage size of 'st' isn't known buffer.c: In function `buf_same_ino': buffer.c:2894: error: dereferencing pointer to incomplete type buffer.c:2895: error: dereferencing pointer to incomplete type *** Error code 1 make: Fatal error: Command failed for target `objects/buffer.o' Current working directory /home/xluntor/vim72/src *** Error code 1 make: Fatal error: Command failed for target `first'

    Read the article

  • Setting tab size in Emacs

    - by Ryan
    I'm using Emacs as an editor. I want to set the tab size to four spaces. In my .emacs file I have the following: (setq default-tab-width 4) I've also tried: (set-default tab-width 4) Either way, when I open emacs and try to tab, it inserts two spaces. Am I doing something wrong? It almost seems like its not seeing my .emacs file. Any suggestions would be great! Thanks!

    Read the article

  • Cannot create file in directory even though it's writable by a group I belong to

    - by Alan Berndt
    I have a directory structure owned by a certain group, and I am a member of the group that owns these directories. I am able to create files in one directory, but not in another, even though the permissions are the same. alan@bricky:/mnt/storage/media$ stat Music Music\ \(Lossy\)/ File: `Music' Size: 34 Blocks: 8 IO Block: 4096 directory Device: fb00h/64256d Inode: 4215424 Links: 3 Access: (2775/drwxrwsr-x) Uid: ( 1001/ media) Gid: ( 1001/ media) Access: 2011-08-19 11:45:03.182586898 -0700 Modify: 2011-08-19 11:44:01.412840027 -0700 Change: 2011-08-19 11:45:02.734603240 -0700 File: `Music (Lossy)/' Size: 6 Blocks: 8 IO Block: 4096 directory Device: fb00h/64256d Inode: 1512056832 Links: 2 Access: (2775/drwxrwsr-x) Uid: ( 1001/ media) Gid: ( 1001/ media) Access: 2011-08-19 11:45:03.190586606 -0700 Modify: 2011-08-19 10:34:46.526530313 -0700 Change: 2011-08-19 11:45:02.738603094 -0700 alan@bricky:/mnt/storage/media$ touch Music/test alan@bricky:/mnt/storage/media$ touch Music\ \(Lossy\)/test touch: cannot touch `Music (Lossy)/test': Permission denied

    Read the article

  • best practice? Consumer data in MySQL on Amazon EBS (Elastic block store)

    - by jeff7091
    This is a consumer app, so I will care about storage costs - I don't want to have 5x copies of data lying about. The app shards very well, so I can use MySQL and not have scaling issues. Amazon EBS has a nice baseline+snapshot backup capability that uses S3. This should have a light footprint (in terms of storage cost). BUT: the magnolia.com story scares the crap out of me: basically flawless block-level backup of a corrupt DB or filesystem. Is there anything that is nearly as storage efficient as EBS at the MySQL level?

    Read the article

  • How to manage credentials on multiserver environment

    - by rush
    I have a some software that uses its own encrypted file for password storage ( such as ftp, web and other passwords to login to external systems, there is no way to use certificates ). On each server I've several instances of this software, each instance has its own password file. At the moment number of servers is permanently growing and it's getting harder and harder to manage all passwords on all instances up to date. Unfortunately, some servers are in cegregated network and there is no access from them to some centralized storage, but it works vice versa. My first idea was to create a git repository, encrypt each password with gpg and store it there and deliver it within deployment system, but security team was not satisfied with this idea and as it is insecure to store passwords in repository even in encrypted view ( from their words ). Nothing similar comes to my mind. Is there any way to implement safe and secure password storage with minimal effort to manage all passwords up-to-date? ps. if that matters I've red hat everywhere.

    Read the article

  • Has anyone used products by StorSimple? [closed]

    - by AlamedaDad
    Their products are storage systems similar to NetApp, but their "hook" is they provide automated tiered storage with the third tier being Cloud providers like Amazon and Azure. They have an interesting story in which they provide primary SAN/iSCSI storage to VMWare and Exchange and at the same time do snaphots to the Cloud. This provides a possible DR option if you have a second system at an alternate location. I was impressed, but I've never heard of them so I'm looking for input and advise on the product. Thanks in advance...

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >