Search Results

Search found 2567 results on 103 pages for 'temp'.

Page 81/103 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88 | Next Page >

Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

- by Anega

Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

Read the article
Is there any good hosting for asp.net and MySQL

- by HAJJAJ

HI every one ,I have account with one of the hosting company, and i did my project in asp.net and I used MySQL for the database. the hosting company is not giving me the full privileges to create new user or to create new stored procedure!!! this is what they said for me: Due to the shared nature of our environment we had to make some modifications to your procedure (namely the definer). We also had to review your procedure to determine if it would be compatible with our environment. While your procedures will work (via phpMyAdmin or some other interface), it is unlikely they will be accessible via the Connector/.NET (ADO.NET) that your application is likely using. This is due to a security restriction with how that connector works in shared environments. http://dev.mysql.com/doc/refman/5.0/en/connector-net-programming-stored.html "Note When you call a stored procedure, the command object makes an additional SELECT call to determine the parameters of the stored procedure. You must ensure that the user calling the procedure has the SELECT privilege on the mysql.proc table to enable them to verify the parameters. Failure to do this will result in an error when calling the procedure." Unfortunately, giving read privileges on the mysql.proc table will give you access to the data of our other customers and that is not an acceptable risk. If your application can only work using stored procedures, then MSSQL will probably be the better option for your site. I apologize for the inconvenience and the wait to have this ticket completed. So is there any good hosting that any body already used it to publish his asp.net and mysql project ??? this is one of my stored procedure and i think it's sample and it will not harm any other uses!!: -- -------------------------------------------------------------------------------- -- Routine DDL -- Note: comments before and after the routine body will not be stored by the server -- -------------------------------------------------------------------------------- DELIMITER $$ CREATE DEFINER=`root`@`localhost` PROCEDURE `SpcategoriesRead`( IN PaRactioncode VARCHAR(5), IN PaRCatID BIGINT, IN PaRSearchText TEXT ) BEGIN -- CREATING TEMPORARY TABLE TO SAVE DATA FROM THE ACTIONCODE SELECTS -- DROP TEMPORARY TABLE IF EXISTS TEMP; CREATE temporary table tmp ( CatID BIGINT primary key not null, CatTitle TEXT, CatDescription TEXT, CatTitleAr TEXT, CatDescriptionAr TEXT, PictureID BIGINT, Published BOOLEAN, DisplayOrder BIGINT, CreatedOn DATE ); IF PaRactioncode = 1 THEN -- Retrive all DATA from the database -- INSERT INTO tmp SELECT CatID,CatTitle,CatDescription,CatTitleAr,CatDescriptionAr,PictureID,Published,DisplayOrder,CreatedOn FROM tbcategories; ELSEIF PaRactioncode = 2 THEN -- Retrive all from the database By ID -- INSERT INTO tmp SELECT CatID,CatTitle,CatDescription,CatTitleAr,CatDescriptionAr,PictureID,Published,DisplayOrder,CreatedOn FROM tbcategories WHERE CatID=PaRCatID; ELSEIF PaRactioncode = 3 THEN -- NOSET YET -- INSERT INTO tmp SELECT CatID,CatTitle,CatDescription,CatTitleAr,CatDescriptionAr,PictureID,Published,DisplayOrder,CreatedOn FROM tbcategories WHERE Published=1 ORDER BY DisplayOrder; END IF; IF PaRSearchText IS NOT NULL THEN set PaRSearchText=concat('%', PaRSearchText ,'%'); SELECT CatID,CatTitle,CatDescription,CatTitleAr,CatDescriptionAr,PictureID,Published,DisplayOrder,CreatedOn FROM tmp WHERE Concat(CatTitle, CatDescription, CatTitleAr, CatDescriptionAr) LIKE PaRSearchText; ELSE SELECT CatID,CatTitle,CatDescription,CatTitleAr,CatDescriptionAr,PictureID,Published,DisplayOrder,CreatedOn FROM tmp; END IF; DROP TEMPORARY TABLE IF EXISTS tmp; END

Read the article
How do I stop icons appearing on the desktop in a particular area?

- by Seamus

When I download something to my desktop, or insert a CD or flash drive, the icon appears on my desktop. When I have conky running, the icon sometimes appears in the top right corner, underneath conky; where I can't see it. How do I stop this happening? My .conkyrc is pasted below. I didn't write it all myself, so I'm not entirely sure what I need to change, or what parts are relevant for this particular question... # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont DejaVu Sans:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 20 # stuff after 'TEXT' will be formatted on screen TEXT $color ${color orange}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine ${color orange}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${acpitemp} $cpubar ${cpugraph 000000 ffffff} NAME ${goto 150}PID ${goto 200}CPU% ${goto 250}MEM% ${top name 1} ${goto 150}${top pid 1} ${goto 200}${top cpu 1} ${goto 250}${top mem 1} ${top name 2} ${goto 150}${top pid 2} ${goto 200}${top cpu 2} ${goto 250}${top mem 2} ${top name 3} ${goto 150}${top pid 3} ${goto 200}${top cpu 3} ${goto 250}${top mem 3} ${top name 4} ${goto 150}${top pid 4} ${goto 200}${top cpu 4} ${goto 250}${top mem 4} ${color orange}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Home: ${fs_free_perc /home}% ${fs_bar 6 /}$color Free Space: ${fs_free /home} ${color orange}NETWORK (${addr eth0}) ${hr 2}$color Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s ${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0 25,140 000000 00ff00}$color Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color orange}WIRELESS (${addr wlan0}) ${hr 2}$color Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,140 000000 00ff00}$color Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} Conky solutions have been offered, but perhaps these aren't the best way of approaching it. What I really want is to stop icons even appearing in that part of the desktop window: that is, I want to make part of the desktop real estate "off-limits" to new icons appearing on the desktop.

Read the article
SQL SERVER – DELETE, TRUNCATE and RESEED Identity

- by pinaldave

Yesterday I had a headache answering questions to one of the DBA on the subject of Reseting Identity Values for All Tables. After talking to the DBA I realized that he has no clue about how the identity column behaves when there is DELETE, TRUNCATE or RESEED Identity is used. Let us run a small T-SQL Script. Create a temp table with Identity column beginning with value 11. The seed value is 11. USE [TempDB] GO -- Create Table CREATE TABLE [dbo].[TestTable]( [ID] [int] IDENTITY(11,1) NOT NULL, [var] [nchar](10) NULL ) ON [PRIMARY] GO -- Build sample data INSERT INTO [TestTable] VALUES ('val') GO When seed value is 11 the next value which is inserted has the identity column value as 11. – Select Data SELECT * FROM [TestTable] GO Effect of DELETE statement -- Delete Data DELETE FROM [TestTable] GO When the DELETE statement is executed without WHERE clause it will delete all the rows. However, when a new record is inserted the identity value is increased from 11 to 12. It does not reset but keep on increasing. -- Build sample data INSERT INTO [TestTable] VALUES ('val') GO -- Select Data SELECT * FROM [TestTable] Effect of TRUNCATE statement -- Truncate table TRUNCATE TABLE [TestTable] GO When the TRUNCATE statement is executed it will remove all the rows. However, when a new record is inserted the identity value is increased from 11 (which is original value). TRUNCATE resets the identity value to the original seed value of the table. -- Build sample data INSERT INTO [TestTable] VALUES ('val') GO -- Select Data SELECT * FROM [TestTable] GO Effect of RESEED statement If you notice I am using the reseed value as 1. The original seed value when I created table is 11. However, I am reseeding it with value 1. -- Reseed DBCC CHECKIDENT ('TestTable', RESEED, 1) GO When we insert the one more value and check the value it will generate the new value as 2. This new value logic is Reseed Value + Interval Value – in this case it will be 1+1 = 2. -- Build sample data INSERT INTO [TestTable] VALUES ('val') GO -- Select Data SELECT * FROM [TestTable] GO Here is the clean up act. -- Clean up DROP TABLE [TestTable] GO Question for you: If I reseed value with some random number followed by the truncate command on the table what will be the seed value of the table. (Example, if original seed value is 11 and I reseed the value to 1. If I follow up with truncate table what will be the seed value now? Here is the complete script together. You can modify it and find the answer to the above question. Please leave a comment with your answer. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article
How do I stop icons appearing on the desktop under conky?

- by Seamus

When I download something to my desktop, or insert a CD or flash drive, the icon appears on my desktop. When I have conky running, the icon sometimes appears in the top right corner, underneath conky; where I can't see it. How do I stop this happening? My .conkyrc is pasted below. I didn't write it all myself, so I'm not entirely sure what I need to change, or what parts are relevant for this particular question... # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont DejaVu Sans:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 20 # stuff after 'TEXT' will be formatted on screen TEXT $color ${color orange}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine ${color orange}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${acpitemp} $cpubar ${cpugraph 000000 ffffff} NAME ${goto 150}PID ${goto 200}CPU% ${goto 250}MEM% ${top name 1} ${goto 150}${top pid 1} ${goto 200}${top cpu 1} ${goto 250}${top mem 1} ${top name 2} ${goto 150}${top pid 2} ${goto 200}${top cpu 2} ${goto 250}${top mem 2} ${top name 3} ${goto 150}${top pid 3} ${goto 200}${top cpu 3} ${goto 250}${top mem 3} ${top name 4} ${goto 150}${top pid 4} ${goto 200}${top cpu 4} ${goto 250}${top mem 4} ${color orange}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Home: ${fs_free_perc /home}% ${fs_bar 6 /}$color Free Space: ${fs_free /home} ${color orange}NETWORK (${addr eth0}) ${hr 2}$color Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s ${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0 25,140 000000 00ff00}$color Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color orange}WIRELESS (${addr wlan0}) ${hr 2}$color Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,140 000000 00ff00}$color Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr}

Read the article
Parenting Opengl with Groups in LibGDX

- by Rudy_TM

I am trying to make an object child of a Group, but this object has a draw method that calls opengl to draw in the screen. Its class its this public class OpenGLSquare extends Actor { private static final ImmediateModeRenderer renderer = new ImmediateModeRenderer10(); private static Matrix4 matrix = null; private static Vector2 temp = new Vector2(); public static void setMatrix4(Matrix4 mat) { matrix = mat; } @Override public void draw(SpriteBatch batch, float arg1) { // TODO Auto-generated method stub renderer.begin(matrix, GL10.GL_TRIANGLES); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y0, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y0, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y0, 0f); renderer.end(); } } In my screen class I have this, i call it in the constructor MyGroupClass spriteLab = new MyGroupClass(spriteSheetLab); OpenGLSquare square = new OpenGLSquare(); square.setX0(100); square.setY0(200); square.setX1(400); square.setY1(280); square.color.set(Color.BLUE); square.setSize(); //spriteLab.addActorAt(0, clock); spriteLab.addActor(square); stage.addActor(spriteLab); And the render in the screen I have @Override public void render(float arg0) { this.gl.glClear(GL10.GL_COLOR_BUFFER_BIT |GL10.GL_DEPTH_BUFFER_BIT); stage.draw(); stage.act(Gdx.graphics.getDeltaTime()); } The problem its that when i use opengl with parent, it resets all the other chldren to position 0,0 and the opengl renderer paints the square in the exact position of the screen and not relative to the parent. I tried using batch.enableBlending() and batch.disableBlending() that fixes the position problem of the other children, but not the relative position of the opengl drawing and it also puts alpha to the glDrawing. What am i doing wrong?:/

Read the article
Unable to connect to mail server via IMAP and roundcube

- by mrhatter

I am having trouble getting the final parts of my mail server up and working. I followed this tutorial to get everything set up on the mail server side. I have installed roundcube for webmail and configured it but it is saying "error connecting, connection refused" when attempting to connect to it using IMAP. This is thorough the "test imap" section of its installer. Also it is giving me an error message about perissions for it's log and temp folders but that's not as important as acutally getting mail to work. I have also tried connecting to the mail server using thunderbird however it cannot establish a connection either and I know my login information is correct. I know that the databases are working correctly based on the roundcube installer telling me that they have been "successfully initialized". Here are my firewall rules -A INPUT -i lo -j ACCEPT -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 25 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 465 -j ACCEPT -A INPUT -p tcp -m tcp --dport 487 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 993 -j ACCEPT -A INPUT -j DROP Which I set up in iptables. I have modified them from what I used in this tutorial I'm not sure what to try next. Any help would be wonderful! I am using Ubuntu 14.04 server, apache 2.4.7, roundcube 1.0.1, and the latest versions of dovecot and postfix. The email databases are contained in mysql. I am running this on a VPS server. UPDATE: I have changed from iptables to using ufw. I have run the following commands to set up a basic firewall with ufw. ufw default deny ufw allow ssh ufw allow http ufw allow https ufw allow imap ufw allow imaps ufw allow smtp I then used telnet to check all of the mail ports. But Port 993 isnt working even though ufw says both 993 and 993/tcp are open. What am I missing?

Read the article
Fixing a NoClassDefFoundError

- by Chris Okyen

I have some code: package ftc; import java.util.Scanner; public class Fer_To_Cel { public static void main(String[] argv) { // Scanner object to get the temp in degrees Farenheit Scanner keyboard = new Scanner(System.in); boolean isInt = true; // temporarily put as true in case the user enters a valid int the first time int degreesF = 0; // initialy set to 0 do { try { // Input the temperature text. System.out.print("\nPlease enter a temperature (integer number, no fractional part) in degrees Farenheit: "); degreesF = Integer.parseInt(keyboard.next()); // Get user input and Assign the far. temperature variable, which is casted from String to int. } // Let the user know in a user friendly notice that the value entered wasnt an int ( give int value range ) , and then give error log catch(java.lang.Exception e) { System.out.println("Sorry but you entered a non-int value ( needs to be between ( including ) -2,147,483,648 and 2,147,483,647 ).. \n"); e.printStackTrace(); isInt = false; } } while(!isInt); System.out.println(""); // print a new line. final int degreesC = (5*(degreesF-32)/9); // convert the degrees from F to C and store the resulting expression in degreesC // Print out a newline, then print what X degrees F is in Celcius. System.out.println("\n" + degreesF + " degrees Farenheit is " + degreesC + " degrees Celcius"); } } And The following error: C:\Program Files\Java\jdk1.7.0_06\bin>java Fer_To_Cel Exception in thread "main" java.lang.NoClassDefFoundError: Fer_To_Cel (wrong name: ftc/Fer_To_Cel) at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:791) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:14 at java.net.URLClassLoader.defineClass(URLClassLoader.java:449) at java.net.URLClassLoader.access$100(URLClassLoader.java:71) at java.net.URLClassLoader$1.run(URLClassLoader.java:361) at java.net.URLClassLoader$1.run(URLClassLoader.java:355) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:354) at java.lang.ClassLoader.loadClass(ClassLoader.java:423) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:356) at sun.launcher.LauncherHelper.checkAndLoadMain(LauncherHelper.java:480) The code compiled without compile errors, but presented errors during execution. Which leads me to two questions. I know Errors can be termed Compiler, Runtime and Logic Errors, but the NoClassDefFoundError inherits java.lang.LinkageError. Does that make it a Linker error, being niether of the three types of errors I listed, If I am right this is the answer. For someone else who obtains the singular .java file and compiles it, would this be the only way to solve this problem? Or can I (should I ) do/have done something to fix this problem? Basically, based on a basis of programming, is this a fault of me as the writer? Could this be done once on, my half and be distributed and not needed be done again?

Read the article
High CPU load for 1:30 minutes when mounting ext4-raid partition

- by sirion

I have a raid 5 (software) with 5x2TB drives. I encrypted the raid with cryptsetup and put an ext4-partition on top. In the beginning opening and mounting the raid took less than 10 seconds, now (for a few weeks) mounting alone takes 1:30 minutes and the cpu stays around 93% the whole time: The output of "time sudo mount /dev/mapper/8000 /media/8000" is: real 1m31.952s user 0m0.008s sys 1m25.229s At the same time only one line is added to /var/log/syslog: kernel: [ 2240.921381] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) My Ubuntu-version is "12.04.1 LTS" and no updates are pending. I checked the partition with fsck, but it says that all is ok. The "cryptsetup luksOpen" command only takes a few seconds. I also tried changing the raid-bitmap (as it was suggested in some forum) but it did not change the behaviour. sudo mdadm --grow /dev/md0 -b internal and sudo mdadm --grow /dev/md0 -b none I had the idea that it might be the hardware being slow, but a read test with "sudo hdparm -t /dev/md0" spit out values between 62 and 159 MB/sec: Timing buffered disk reads: 382 MB in 3.00 seconds = 127.14 MB/sec Timing buffered disk reads: 482 MB in 3.02 seconds = 159.62 MB/sec Timing buffered disk reads: 190 MB in 3.03 seconds = 62.65 MB/sec Timing buffered disk reads: 474 MB in 3.02 seconds = 157.12 MB/sec Although I think it is strange that the read rate jumps by more than 100% - could that mean something? The speed test when reading from the mapped (decrypted) device shows similar behavior, although it is of course much slower. "sudo hdparm -t /dev/mapper/8000": Timing buffered disk reads: 56 MB in 3.02 seconds = 18.54 MB/sec Timing buffered disk reads: 122 MB in 3.09 seconds = 39.43 MB/sec Timing buffered disk reads: 134 MB in 3.02 seconds = 44.35 MB/sec The output of a verbose mount "mount -vvv /dev/mapper/8000 /media/8000" does not help much: mount: fstab path: "/etc/fstab" mount: mtab path: "/etc/mtab" mount: lock path: "/etc/mtab~" mount: temp path: "/etc/mtab.tmp" mount: UID: 0 mount: eUID: 0 mount: spec: "/dev/mapper/8000" mount: node: "/media/8000" mount: types: "(null)" mount: opts: "(null)" mount: you didn't specify a filesystem type for /dev/mapper/8000 I will try type ext4 mount: mount(2) syscall: source: "/dev/mapper/8000", target: "/media/8000", filesystemtype: "ext4", mountflags: -1058209792, data: (null) Any idea where I could find additional information on why mounting takes so long, or what additional tests I could run?

Read the article
What Is .recently-used.xbel and How Do I Delete It for Good?

- by The Geek

If you’re reading this article, you’ve probably noticed the .recently-used.xbel file in the root of your User folder, and you’re wondering why it keeps constantly coming back even though you repeatedly delete it. So What Is It? The quick answer is that it’s part of the GTK+ library used by a number of cross-platform applications, perhaps the most well-known of which is the Pidgin instant messenger client. As the name implies, the file is used to store a list of the most recently used files. In the case of Pidgin, this comes into play when you are transferring files over IM, and that’s when the file will appear again. Note: this is actually a known and reported bug in Pidgin, but sadly the developers aren’t terribly responsive when it comes to annoyances. Pidgin seems to go for long periods of time without any updates, but we still use it because it’s open-source, cross-platform, and works well. How Do I Get Rid of It? Unfortunately, there’s no way to easily get rid of it, apart from using a different application. If you need to transfer files over Pidgin, the file is going to re-appear… but there’s a quick workaround! The general idea is to set the file properties to Hidden and Read-only. You’d think you could just set it to Hidden and be done with it, but Pidgin will re-create the file every time, so instead we’re leaving the file there and preventing it from being accessed. You could also totally remove access through the Security tab if you wanted to, but this worked fine for me… as you can see, no more file in the folder. Of course, you can’t have the show hidden files and folders option turned on, or the file will continue to show up. Want to get really geeky? You can toggle hidden files with a shortcut key. Similar Articles Productive Geek Tips Hide Recently Used Documents/Programs From the Windows Vista Start MenuQuick Tip: Windows Vista Temp Files DirectoryDelete Wrong AutoComplete Entries in Windows Vista MailDisable Delete Confirmation Dialog in Windows 7 or VistaHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily

Read the article
Fans running very fast on MacBook Pro 8.1 ubuntu 12.04

- by Tomasz Kacprzak

I installed Ubuntu 12.04 on Macbook Pro 8.1 and one of the first things I noticed was that the fans were starting to spin very fast every few minutes for 10-30 sec and then going back to normal. That was happening even without any processor load, when completely idle. The fans were usually spinning at 4000 RPM and made much noise. The computer was not getting hotter than usual. When running OSX Lion there was no noise at all, fans almost all the time at 2000 RPM. I spent some time on it and found out that Precise uses a deamon to control the temperature, called macfanctld. You can use /etc/macfanctld.conf to set the configuration. I found out that the high fan speed is not due to the fact that the temperature is getting hot, but because there are two sensors which indicate wrong numbers (you can check that using 'sensors' command ): TW0P: +129.0°C TCTD: +256.0°C TCFC: +0.0°C TMBS: +0.0°C or setting the macfanctld log level to 2: Speed: 4992, *AVG: 56.9C, TC0P: 50.2C, TG0P: 51.5C, Sensors: TB0T:34 TB1T:34 TB2T:33 TC0C:58 TC0D:56 TC0E:59 TC0F:60 TC0P:50 TC1C:58 TC2C:58 TC3C:58 TC4C:57 TCFC:0 TCGC:57 TCSA:53 TCTD:256 TG0D:52 TG0P:52 THSP:42 TM0S:64 TMBS:0 TP0P:54 TPCD:60 TW0P:129 Th1H:51 Th2H:48 Tm0P:40 Ts0P:32 Ts0S:43 Moreover, TCTD was randomly jumping from temperatures of 0 to 256, so this may be the reason for unjustified random fan speeds. macfanctld is taking an average of the sensors including the values above, so the actual AVG temp used to control the fans is wrong, usually biased up, hence high RPM and noise. The workaround solution is to use an option in the macfanctld.conf which allows to ignore the malfunctioning sensors: exclude: 13 16 21 24 After reboot the reported temperatures are usually normal and the fans are working at reasonable speeds. I tested the response of the fans to heavy processor load by asking MATLAB to invert 10000x10000 matrix and the AVG temperature jumped to 63deg, and the fan to max 6200 RPM and then got it back to normal temperature. So I think it is safe so far. There is a expired bug about the failing sensor readings: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/955538 which may be good to open again. My question would be: does anyone know what the failing sensors do and if there is any danger in excluding them? Maybe some better solution to this problem?

Read the article
Fans running very fast on MacBook Pro 8.1

- by Tomasz Kacprzak

I installed Ubuntu 12.04 on Macbook Pro 8.1 and one of the first things I noticed was that the fans were starting to spin very fast every few minutes for 10-30 sec and then going back to normal. That was happening even without any processor load, when completely idle. The fans were usually spinning at 4000 RPM and made much noise. The computer was not getting hotter than usual. When running OSX Lion there was no noise at all, fans almost all the time at 2000 RPM. I spent some time on it and found out that Precise uses a deamon to control the temperature, called macfanctld. You can use /etc/macfanctld.conf to set the configuration. I found out that the high fan speed is not due to the fact that the temperature is getting hot, but because there are two sensors which indicate wrong numbers (you can check that using 'sensors' command ): TW0P: +129.0°C TCTD: +256.0°C TCFC: +0.0°C TMBS: +0.0°C or setting the macfanctld log level to 2: Speed: 4992, *AVG: 56.9C, TC0P: 50.2C, TG0P: 51.5C, Sensors: TB0T:34 TB1T:34 TB2T:33 TC0C:58 TC0D:56 TC0E:59 TC0F:60 TC0P:50 TC1C:58 TC2C:58 TC3C:58 TC4C:57 TCFC:0 TCGC:57 TCSA:53 TCTD:256 TG0D:52 TG0P:52 THSP:42 TM0S:64 TMBS:0 TP0P:54 TPCD:60 TW0P:129 Th1H:51 Th2H:48 Tm0P:40 Ts0P:32 Ts0S:43 Moreover, TCTD was randomly jumping from temperatures of 0 to 256, so this may be the reason for unjustified random fan speeds. macfanctld is taking an average of the sensors including the values above, so the actual AVG temp used to control the fans is wrong, usually biased up, hence high RPM and noise. The workaround solution is to use an option in the macfanctld.conf which allows to ignore the malfunctioning sensors: exclude: 13 16 21 24 After reboot the reported temperatures are usually normal and the fans are working at reasonable speeds. I tested the response of the fans to heavy processor load by asking MATLAB to invert 10000x10000 matrix and the AVG temperature jumped to 63deg, and the fan to max 6200 RPM and then got it back to normal temperature. So I think it is safe so far. There is a expired bug about the failing sensor readings: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/955538 which may be good to open again. My question would be: does anyone know what the failing sensors do and if there is any danger in excluding them? Maybe some better solution to this problem?

Read the article
11g ???:Active Data Guard

- by JaneZhang(???)

?Oracle 11g??,????(physical Standby)???redo???,???????,???mount??11g??,???redo???,????????read-only??,????Active Data Guard ???Active Data Guard,?????????????????,?????????????? Active Data Guard???????????,??,????????????,????????,????redo??,????????????,??????????? Oracle Active Data Guard ?Oracle Database Enterprise Edition?????,?????????????? ????Active Data Guard, ??????? read-only ????,???? ALTER DATABASE RECOVER MANAGED STANDBY DATABASE????????????:??????COMPATIBLE ????????11.0.0? ???????Active Data Guard,???V$DATABASE????"READ ONLY WITH APPLY': SQL> SELECT open_mode FROM V$DATABASE; OPEN_MODE -------------------- READ ONLY WITH APPLY ????????????,???????real-time apply: SQL>ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE; ?????????read-only????????: • Issue SELECT statements, including queries that require multiple sorts that leverage TEMP segments • Use ALTER SESSION and ALTER SYSTEM statements • Use SET ROLE • Call stored procedures • Use database links (dblinks) to write to remote databases • Use stored procedures to call remote procedures via dblinks • Use SET TRANSACTION READ ONLY for transaction level read consistency • Issue complex queries (such as grouping SET queries and WITH CLAUSE queries) ??????????read-only????????: • Any DMLs (excluding simple SELECT statements) or DDLs • Query accessing local sequences • DMLs to local temporary tables ?????Active Data Guard ??: • ????????????????? • ???Oracle Real Application Clusters (Oracle RAC) ,?????? • RAC???RAC?? Oracle Data Guard ?????,,????????: * ?????????????????: http://docs.oracle.com/cd/B28359_01/server.111/b28294/create_ps.htm * ???Oracle Real Application Clusters (Oracle RAC) ,??????: http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimarysingleinstance-131970.pdf * RAC ???RAC ??: http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimaryracphysicalsta-131940.pdf ??Active Data Guard???????,?????: http://www.oracle.com/technetwork/database/features/availability/maa-wp-11gr1-activedataguard-1-128199.pdf ??Oracle Maximum Availability Architecture Best Practices?????,???: http://www.oracle.com/goto/maa

Read the article
Questions about TinyMCE. Or suggestions on a compariable product.

- by chobo2

Hi I am using jquery 1.3.2 and asp.net mvc 1.0. Originally I was using some other rich html editor but I ran into one major problem when a user pasted in text from open office or MS office it would bring along tons of styling junk. If a user like wrote one sentence what was like 25 characters and pasted that into my current html editor the count would 25,000 characters and I don't want to store all that junk( I can't afford to). So tinyMCE seems to not have this problem. However I got some questions. It seems if you want to use for commercial use(what my site is but currently is not making very much at this time) you need to get a commercial license. However it does not say if it is free or if it will cost money. I am assuming it means that you will have to pay but I would like to confirm this. So do you have to pay for a license to use tinyMCe if your using it for commercial use? (Yes/ No) ------------------ Answer the following questions if you said "no" to the first question ----------- So would I use the jQuery package then or is it better to use the other versions? What is this .net compressor zip for? Do I need it? I only want a few of the buttons(like bold,font size) can I remove the other buttons? It seems to display a word count. Can it be changed to character count? ----------------- Answer the following question if you said "yes" to the first question -------- Is there a rich html editor that is free for commercial use and preferably for jquery that can remove the junk that office programs seem to bring along? This is a test to show how much formatting gets made. • One • Two • Three The above text when copied into my current rich html editor will have all this code with it. <meta http-equiv="Content-Type" content="text/html; charset=utf-8"><meta name="ProgId" content="Word.Document"><meta name="Generator" content="Microsoft Word 12"><meta name="Originator" content="Microsoft Word 12"><link rel="File-List" href="file:///C:%5CUsers%5Cchobo2%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_filelist.xml"><link rel="themeData" href="file:///C:%5CUsers%5Cchobo2%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_themedata.thmx"><link rel="colorSchemeMapping" href="file:///C:%5CUsers%5Cchobo2%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_colorschememapping.xml"><style>  </style> This is a test to show how much formatting gets made. ·         One ·         Two ·         Three <o:p> </o:p>

Read the article
How to parse out MS Word formatting?

- by chobo2

I have a rich html textbox on my asp.net mvc application. The rich html textbox is some jquery plugin that I use and has basic stuff like bold,underline and etc. Now I am anticipating that people will maybe write something in word and then copy and paste it into my textbox. However I limit the number of characters a person can have. This is a test to show how much formatting gets made. • One • Two • Three So I wrote that above(it does not copy to well into here). Basically it is a line of text and "how" is bold and the "one,two,three" are a bullet list. Word says it is 70 characters long with spacing. However when I post this data from my textbox to my server I get a length back of 24577 characters. so I checked what was being sent and I get this <meta http-equiv="Content-Type" content="text/html; charset=utf-8"><meta name="ProgId" content="Word.Document"><meta name="Generator" content="Microsoft Word 12"><meta name="Originator" content="Microsoft Word 12"><link rel="File-List" href="file:///C:%5CUsers%5Cchobo2%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_filelist.xml"><link rel="themeData" href="file:///C:%5CUsers%5Cchobo2%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_themedata.thmx"><link rel="colorSchemeMapping" href="file:///C:%5CUsers%5Cchobo2%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_colorschememapping.xml"><style>  </style> This is a test to show how much formatting gets made. ·         One ·         Two ·         Three <o:p> </o:p> Is there something I can use to get rid of all this stuff?

Read the article
IIS7Register failed with HRESULT 800700b7: 'Cannot create a file when that file already exists.'

- by Optimax

I am trying to re-install ASP.NET on IIS7 running in Win7/64, which magically stopped working all of as sudden. When I run aspnet_regiis -i, I get an error message that says Finished installing ASP.NET (4.0.30319). Setup has detected some errors during the operation. For details, please read the setup log file C:\Users\username\AppData\Local\Temp\ASPNETSetup_00031.log Looking at the log, it reports Failure Changing IIS ApplicationHost.config: IIS7Register failed with HRESULT 800700b7: 'Cannot create a file when that file already exists. ' The real problem surfaces when trying to access an ASP.NET web page from that server: HTTP Error 500.21 - Internal Server Error Handler "PageHandlerFactory-Integrated" has a bad module "ManagedPipelineHandler" in its module list and Most likely causes: Managed handler is used; however, ASP.NET is not installed or is not installed completely. There is a typographical error in the configuration for the handler module list. So it seems ASP.NET has NOT been properly re-installed. Now, I am aware of the alleged one-and-only remedy for this, repeated all over the Web, and referenced for example here: http://blogs.msdn.com/b/dougste/archive/2010/09/06/errors-installing-asp-net-4-0.aspx Except that the proposed solution does not work for me. I have expanded the %windir% macros within isapiCgiRestriction section for .NET 4.0 - and aspnet_regiis still fails for me. Any other ideas?

Read the article
ARR troubleshooting 502.3 / WinHttp tracing on Server 2012

- by nachojammers

I have the following scenario: 3 windows server 2012 virtual servers, all with IIS 8: 1 server with Application Request Routing 3 2 servers with the web applications that the ARR server routes to I am getting intermittent 502 3 12002 errors. Following this guide http://www.iis.net/learn/extensions/troubleshooting-application-request-routing/troubleshooting-502-errors-in-arr I have identified that I need to trace using netsh the WinHttp/WebIO providers to get to the real error code that is mapped to the 12002 error code. I run the trace as the article suggests: netsh trace start scenario=internetclient capture=yes persistent=no level=verbose tracefile=c:\temp\net.etl When analysing the output of the netsh traces, I don't get the level of information that the article suggests I should. Specifically I only get the following types of entry in the trace viewed using netmon: WINHTTP_MicrosoftWindowsWinHttp:Stopping WorkItem Thread Action... WINHTTP_MicrosoftWindowsWinHttp:Starting WorkItem Thread Action... WINHTTP_MicrosoftWindowsWinHttp:Queue Overlapped IO Thread Action... I certainly don't get anything detailed enough that would help me understand why am getting any timeouts. Is there any reason why Server 2012 wouldn't trace the WinHttp API to the level I need? Thanks

Read the article
imapsync - Authentication failed

- by Touff

I've deployed many Google Apps accounts and have used imapsync a number of times to migrate accounts to Google Apps. This time however, no matter what I try imapsync refuses to work claiming my credentials are incorrect - I've checked them time and time again and they are 100% correct. On Ubuntu 12, built from source, my command is: imapsync --host1 myserver.com --user1 [email protected] --password1 mypassword1 -ssl1 --host2 imap.gmail.com --user2 [email protected] --password2 mypassword2 -ssl2 -authmech2 PLAIN Full output from the command: get options: [1] PID is 21316 $RCSfile: imapsync,v $ $Revision: 1.592 $ $Date: With perl 5.14.2 Mail::IMAPClient 3.35 Command line used: /usr/bin/imapsync --debug --host1 myserver.com --user1 [email protected] --password1 mypassword1 -ssl1 --host2 imap.gmail.com --user2 [email protected] --password2 mypassword2 -ssl2 -authmech2 PLAIN Temp directory is /tmp PID file is /tmp/imapsync.pid Modules version list: Mail::IMAPClient 3.35 IO::Socket 1.32 IO::Socket::IP ? IO::Socket::INET 1.31 IO::Socket::SSL 1.53 Net::SSLeay 1.42 Digest::MD5 2.51 Digest::HMAC_MD5 1.01 Digest::HMAC_SHA1 1.03 Term::ReadKey 2.30 Authen::NTLM 1.09 File::Spec 3.33 Time::HiRes 1.972101 URI::Escape 3.31 Data::Uniqid 0.12 IMAPClient 3.35 Info: turned ON syncinternaldates, will set the internal dates (arrival dates) on host2 same as host1. Info: will try to use LOGIN authentication on host1 Info: will try to use PLAIN authentication on host2 Info: imap connexions timeout is 120 seconds Host1: IMAP server [SERVER1] port [993] user [USER1] Host2: IMAP server [imap.gmail.com] port [993] user [USER2] Host1: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready. Host1: SERVER1 says it has CAPABILITY for AUTHENTICATE LOGIN Host1: success login on [SERVER1] with user [USER1] auth [LOGIN] Host2: * OK Gimap ready for requests from MY-VPS Host2: imap.gmail.com says it has CAPABILITY for AUTHENTICATE PLAIN Failure: error login on [imap.gmail.com] with user [USER2] auth [PLAIN]: 2 NO [AUTHENTICATIONFAILED] Invalid credentials (Failure) I have tried -authmech2 LOGIN as well which returns: Host2: imap.gmail.com says it has NO CAPABILITY for AUTHENTICATE LOGIN Failure: error login on [imap.gmail.com] with user [[email protected]] auth [LOGIN]: 2 NO [AUTHENTICATIONFAILED] Invalid credentials (Failure) If anyone can shed some light on this I would greatly appreciate it.

Read the article
SQL Server Express 2008 R2 Installation error at Windows 7

- by Shai Sherman

Hello, I created install script that will install SQL Server 2008 R2 on windows XP SP3, windows vista and windows 7. One of the command that i used in the installation is for silent installation of SQL Server 2008 R2. When i install it on windows XP everything works just fine but when i try to install it on Windows 7 i get an error. What am I doing wrong? Here is the command line that i use: "Setup.exe /ConfigurationFile=Mysetup.ini" Mysetup.ini file: -------------------------------------Start of ini file --------------------------------- ;SQL SERVER 2008 R2 Configuration File ;Version 1.0, 5 May 2010 ; [SQLSERVER2008] ; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance. INSTANCEID="MSSQLSERVER" ; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter. ACTION="Install" ; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books online, Business Intelligence Development Studio, and other shared components. FEATURES=SQLENGINE ; Displays the command line parameters usage HELP="False" ; Specifies that the detailed Setup log should be piped to the console. INDICATEPROGRESS="False" ; Setup will not display any user interface. QUIET="False" ; Setup will display progress only without any user interaction. QUIETSIMPLE="True" ; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system. ;X86="False" ; Specifies the path to the installation media folder where setup.exe is located. ;MEDIASOURCE="z:\" ; Detailed help for command line argument ENU has not been defined yet. ENU="True" ; Parameter that controls the user interface behavior. Valid values are Normal for the full UI, and AutoAdvance for a simplied UI. ; UIMODE="Normal" ; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature. ERRORREPORTING="False" ; Specify the root installation directory for native shared components. ;INSTALLSHAREDDIR="D:\Program Files\Microsoft SQL Server" ; Specify the root installation directory for the WOW64 shared components. ;INSTALLSHAREDWOWDIR="D:\Program Files (x86)\Microsoft SQL Server" ; Specify the installation directory. ;INSTANCEDIR="D:\Program Files\Microsoft SQL Server" ; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature. SQMREPORTING="False" ; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting Services (RS). INSTANCENAME="SQLEXPRESS" SECURITYMODE=SQL SAPWD=SystemAdmin ; Agent account name AGTSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE" ; Auto-start service after installation. AGTSVCSTARTUPTYPE="Manual" ; Startup type for Integration Services. ;ISSVCSTARTUPTYPE="Automatic" ; Account for Integration Services: Domain\User or system account. ;ISSVCACCOUNT="NT AUTHORITY\NetworkService" ; Controls the service startup type setting after the service has been created. ;ASSVCSTARTUPTYPE="Automatic" ; The collation to be used by Analysis Services. ;ASCOLLATION="Latin1_General_CI_AS" ; The location for the Analysis Services data files. ;ASDATADIR="Data" ; The location for the Analysis Services log files. ;ASLOGDIR="Log" ; The location for the Analysis Services backup files. ;ASBACKUPDIR="Backup" ; The location for the Analysis Services temporary files. ;ASTEMPDIR="Temp" ; The location for the Analysis Services configuration files. ;ASCONFIGDIR="Config" ; Specifies whether or not the MSOLAP provider is allowed to run in process. ;ASPROVIDERMSOLAP="1" ; A port number used to connect to the SharePoint Central Administration web application. ;FARMADMINPORT="0" ; Startup type for the SQL Server service. SQLSVCSTARTUPTYPE="Automatic" ; Level to enable FILESTREAM feature at (0, 1, 2 or 3). FILESTREAMLEVEL="0" ; Set to "1" to enable RANU for SQL Server Express. ENABLERANU="1" ; Specifies a Windows collation or an SQL collation to use for the Database Engine. SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS" ; Account for SQL Server service: Domain\User or system account. SQLSVCACCOUNT="NT Authority\System" ; Default directory for the Database Engine user databases. ;SQLUSERDBDIR="K:\Microsoft SQL Server\MSSQL\Data" ; Default directory for the Database Engine user database logs. ;SQLUSERDBLOGDIR="L:\Microsoft SQL Server\MSSQL\Data\Logs" ; Directory for Database Engine TempDB files. ;SQLTEMPDBDIR="T:\Microsoft SQL Server\MSSQL\Data" ; Directory for the Database Engine TempDB log files. ;SQLTEMPDBLOGDIR="T:\Microsoft SQL Server\MSSQL\Data\Logs" ; Provision current user as a Database Engine system administrator for SQL Server 2008 R2 Express. ADDCURRENTUSERASSQLADMIN="True" ; Specify 0 to disable or 1 to enable the TCP/IP protocol. TCPENABLED="1" ; Specify 0 to disable or 1 to enable the Named Pipes protocol. NPENABLED="0" ; Startup type for Browser Service. BROWSERSVCSTARTUPTYPE="Automatic" ; Specifies how the startup mode of the report server NT service. When ; Manual - Service startup is manual mode (default). ; Automatic - Service startup is automatic mode. ; Disabled - Service is disabled ;RSSVCSTARTUPTYPE="Automatic" ; Specifies which mode report server is installed in. ; Default value: “FilesOnly” ;RSINSTALLMODE="FilesOnlyMode" ; Accept SQL Server 2008 R2 license terms IACCEPTSQLSERVERLICENSETERMS="TRUE" ;setup.exe /CONFIGURATIONFILE=Mysetup.ini /INDICATEPROGRESS --------------------------- End of ini file ------------------------------------- And i get this error: 2010-08-31 18:05:53 Slp: Error result: -2068119551 2010-08-31 18:05:53 Slp: Result facility code: 1211 2010-08-31 18:05:53 Slp: Result error code: 1 2010-08-31 18:05:53 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine 2010-08-31 18:05:53 Slp: Sco: Attempting to open registry subkey 2010-08-31 18:05:53 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed 2010-08-31 18:05:53 Slp: Sco: Attempting to get registry value DW0200 2010-08-31 18:05:53 Slp: Submitted 1 of 1 failures to the Watson data repository What the meaning of this? What do i need to do to fix that problem? Here is the Summary file: Overall summary: Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit code (Decimal): -2068119551 Exit facility code: 1211 Exit error code: 1 Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Start time: 2010-08-31 18:03:44 End time: 2010-08-31 18:05:51 Requested action: Install Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\Detail.txt Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0x6121810A%400xC24842DB Machine Properties: Machine name: NVR Machine processor count: 2 OS version: Windows 7 OS service pack: OS region: United States OS language: English (United States) OS architecture: x86 Process architecture: 32 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Package properties: Description: SQL Server Database Services 2008 R2 ProductName: SQL Server 2008 R2 Type: RTM Version: 10 SPLevel: 0 Installation location: C:\Disk1\setupsql\x86\setup\ Installation edition: EXPRESS User Input Settings: ACTION: Install ADDCURRENTUSERASSQLADMIN: True AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE AGTSVCPASSWORD: * AGTSVCSTARTUPTYPE: Disabled ASBACKUPDIR: Backup ASCOLLATION: Latin1_General_CI_AS ASCONFIGDIR: Config ASDATADIR: Data ASDOMAINGROUP: ASLOGDIR: Log ASPROVIDERMSOLAP: 1 ASSVCACCOUNT: ASSVCPASSWORD: * ASSVCSTARTUPTYPE: Automatic ASSYSADMINACCOUNTS: ASTEMPDIR: Temp BROWSERSVCSTARTUPTYPE: Automatic CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\ConfigurationFile.ini CUSOURCE: ENABLERANU: True ENU: True ERRORREPORTING: False FARMACCOUNT: FARMADMINPORT: 0 FARMPASSWORD: * FEATURES: SQLENGINE FILESTREAMLEVEL: 0 FILESTREAMSHARENAME: FTSVCACCOUNT: FTSVCPASSWORD: * HELP: False IACCEPTSQLSERVERLICENSETERMS: True INDICATEPROGRESS: False INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSQLDATADIR: INSTANCEDIR: C:\Program Files\Microsoft SQL Server\ INSTANCEID: MSSQLSERVER INSTANCENAME: SQLEXPRESS ISSVCACCOUNT: NT AUTHORITY\NetworkService ISSVCPASSWORD: * ISSVCSTARTUPTYPE: Automatic NPENABLED: 0 PASSPHRASE: * PCUSOURCE: PID: * QUIET: False QUIETSIMPLE: True ROLE: AllFeatures_WithDefaults RSINSTALLMODE: FilesOnlyMode RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE RSSVCPASSWORD: * RSSVCSTARTUPTYPE: Automatic SAPWD: * SECURITYMODE: SQL SQLBACKUPDIR: SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS SQLSVCACCOUNT: NT Authority\System SQLSVCPASSWORD: * SQLSVCSTARTUPTYPE: Automatic SQLSYSADMINACCOUNTS: SQLTEMPDBDIR: SQLTEMPDBLOGDIR: SQLUSERDBDIR: SQLUSERDBLOGDIR: SQMREPORTING: False TCPENABLED: 1 UIMODE: AutoAdvance X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\ConfigurationFile.ini Detailed results: Feature: Database Engine Services Status: Failed: see logs for details MSI status: Passed Configuration status: Failed: see details below Configuration error code: 0x0A2FBD17@1211@1 Configuration error description: The process cannot access the file because it is being used by another process. Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\Detail.txt Rules with failures: Global rules: Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100831_180236\SystemConfigurationCheck_Report.htm What should I do and why does this problem occur? Thanks , Shai.

Read the article
Can't delete C:\Config.Msi\75ce84f.rbf

- by Hugh Allen

I can't delete C:\Config.Msi\75ce84f.rbf It's not causing any problems but it's a mystery I'd like to solve, preferably before the next reboot because it's scheduled for deletion then (see pendmoves). it's not readonly, system or hidden it's not in use by another process (according to Process Explorer) the NT security permissions aren't the problem either - I am the owner and have Full Control ; as a double-check, the Effective Permissions tab shows that I have permission to delete. Yet trying to delete the file gives "Access is Denied" from both Explorer and cmd. I can however rename it or move it to another folder on the same drive. I can also read it and Virustotal says it's clean which is what I would expect (it's just a Windows Installer temp file - a copy of some DLL I think). The relevant line from Process Monitor is: 6:52:14.3726983 PM 112 Explorer.EXE SetDispositionInformationFile C:\Config.Msi\75ce84f.rbf CANNOT DELETE Delete: True Write 1232 Background: I'm using XP SP2. I recently repaired my Adobe Reader installation to make it the default browser plugin again instead of Foxit. (there seems to be no UI to do it otherwise?) So the installer did its thing and then asked to reboot. As is my habit when rebooting is inconvenient I declined the offer and ran pendmoves to find out what files the installer had scheduled to move / delete. It wanted to delete two files with .rbf extension (rollback files) located in C:\Config.msi\. (this applies to both even though I've been speaking about one). So I tried to delete them manually and couldn't. Does anyone have any ideas what could be preventing deletion? (and I don't think it's malware even though I'm not running AV at the moment)

Read the article
how to enable iis 7 dynamic content compression?

- by davidcl

I've turned on dynamic content compression in IIS 7, but Fiddler is showing that my dynamic pages are still being served without content-encoding: gzip. Static content compression is working fine on the same servers. Not sure if it matters but most of the dynamic pages are coldfusion pages and we're also using the IIS URL rewriting module. This is from my applicationhost.config. <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" /> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </staticTypes> </httpCompression> ... <urlCompression doDynamicCompression="true" /> Here's a sample request: GET / HTTP/1.1 Host: web5.example.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6 (.NET CLR 3.5.30729) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive and response header: HTTP/1.1 200 OK Transfer-Encoding: chunked Content-Type: text/html; charset=UTF-8 Server: Microsoft-IIS/7.0 ... Date: Mon, 22 Feb 2010 20:59:36 GMT

Read the article
Antivirus Configuration for dedicated SQL and dedicated IIS Servers

- by Wayne Arthurton

Our corporate standard is McAfee Enterprise, unfortunately this is non-negotiable. On two types of servers I'm responsible for, SQL & Web, we have noticed major performance issues with the corporate standard setup. Max scan time 45sec One policy for all processes Scan ALL files on write, read and open for backup Heuristics: Find unknown programs, trojans and macros Detect unwanted programs Exclude: EVT, LDF, LOG, MDF, VMD, , windows file protection) This of course still causes major slowdowns. IIS .NET recompiles are slow especially with SharePoint, SQL backups and restores, SQL Analysis Services, Integration Services and temp data from them as well. I have looked from time to time, for some best practices on setting up McAfee of SQL & SQL Analysis Service, SQL Integration Service, Visual Studio, Sharepoint, and .NET web servers in general. How do people setup McAfee enterprise on their corporate serves keeping security intact, but affecting performance as minimally as possible? Has anyone run across white papers on these setups? Obviously some are case by case, but there must be some best practices out there somewhere.

Read the article
how to get Geo::Coder::Many with cpan?

- by mnemonic

Ubuntu is installed for development of a Perl project. aptitude search Geo-Coder i libgeo-coder-googlev3-perl - Perl module providing access to Google Map Aptitude does not refer to Geo::Coder::Many cpan can not build it. sudo cpan Geo::Coder::Many Then: CPAN: Storable loaded ok (v2.27) Going to read '/home/jh/.cpan/Metadata' Database was generated on Wed, 16 Oct 2013 06:17:04 GMT Running install for module 'Geo::Coder::Many' Running make for K/KA/KAORU/Geo-Coder-Many-0.42.tar.gz CPAN: Digest::SHA loaded ok (v5.61) CPAN: Compress::Zlib loaded ok (v2.033) Checksum for /home/jh/.cpan/sources/authors/id/K/KA/KAORU/Geo-Coder-Many-0.42.tar.gz ok CPAN: File::Temp loaded ok (v0.22) CPAN: Parse::CPAN::Meta loaded ok (v1.4401) CPAN: CPAN::Meta loaded ok (v2.110440) CPAN: Module::CoreList loaded ok (v2.49_02) CPAN: Module::Build loaded ok (v0.38) CPAN.pm: Going to build K/KA/KAORU/Geo-Coder-Many-0.42.tar.gz Can't locate Geo/Coder/Many/Google.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/share/perl/5.14/Module/Load.pm line 27. Can't locate Geo/Coder/Many/Google in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/share/perl/5.14/Module/Load.pm line 27. BEGIN failed--compilation aborted at Build.PL line 54. Warning: No success on command[/usr/bin/perl Build.PL --installdirs site] CPAN: YAML loaded ok (v0.77) KAORU/Geo-Coder-Many-0.42.tar.gz /usr/bin/perl Build.PL --installdirs site -- NOT OK Running Build test Make had some problems, won't test Running Build install Make had some problems, won't install Could not read metadata file. Falling back to other methods to determine prerequisites Any suggestions how to resolve this issue?

Read the article
Tomcat 7 on Ubuntu 12.04 startup issues

- by Nico Huysamen

I am having trouble getting tomcat 7 to start up on my new VPS. I am really scratching my head since I have done this often. So I'm thinking it might be the VPS. I just got a new VPS from CINFU. After a clean install of Ubuntu 12.04 32bit, I install openjdk-6-jdk, update JAVA_HOME to point to: /usr/lib/jvm/java-1.6.0-openjdk-i386 and JRE_HOME to: /usr/lib/jvm/java-1.6.0-openjdk-i386/jre But when I try to run: ./catalina.sh run it simply outputs: Using CATALINA_BASE: /opt/tomcat/apache-tomcat-7.0.29 Using CATALINA_HOME: /opt/tomcat/apache-tomcat-7.0.29 Using CATALINA_TMPDIR: /opt/tomcat/apache-tomcat-7.0.29/temp Using JRE_HOME: /usr/lib/jvm/java-1.6.0-openjdk-i386 Using CLASSPATH: /opt/tomcat/apache-tomcat-7.0.29/bin/bootstrap.jar:/opt/tomcat/apache-tomcat-7.0.29/bin/tomcat-juli.jar and stops. It just hangs there doing nothing. If I run ./startup.sh && tail -f ../logs/catalina.out it gets to: Aug 24, 2012 8:38:36 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["http-bio-8080"] Aug 24, 2012 8:38:36 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["ajp-bio-8009"] Aug 24, 2012 8:38:36 PM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 495 ms Aug 24, 2012 8:38:36 PM org.apache.catalina.core.StandardService startInternal INFO: Starting service Catalina Aug 24, 2012 8:38:36 PM org.apache.catalina.core.StandardEngine startInternal INFO: Starting Servlet Engine: Apache Tomcat/7.0.29 but I am unable to access anything. The request just hangs. I have also tried a few other things like explicitly exporting the paths etc in catalina.sh, and running ./startup.sh rather than catalina.sh, but the furthest I have gotten is that it finishes deploying all the WARs (the default ones that comes with tomcat like the host-manager etc), but then it hangs: Aug 24, 2012 8:47:30 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["http-bio-8080"] and does nothing. Anyone have any pointers that might help? As I said, I must really be missing something stupid since this has worked on all other VPSs that we have. UPDATE I figured out that the problem is actually the fact that they use OpnVZ virtualization and that there are known compatibility problems with Java.

Read the article
Problem recreating BCD on Windows 7 64bit - The requested system device cannot be found

- by Domchi

NVIDIA drivers upgrade crashed my Windows 7 installation, so I'm working to undo the damage. What I can do: I can boot Windows install from the USB drive, and I can boot the Hiren's Boot CD. Although automated Windows repair fails, I can get to command prompt when I boot Windows install from USB drive, and I can see my drive and all my data. What I cannot do: I cannot boot into Windows - I get this message: Windows failed to start. A recent hardwware or software change might be the cause. To fix the problem: 1.insert windos cd and run a repair your computer option. File: /boot/bcd Status: 0xc000000f Info: an error occured while attempting to read the boot configuration data. It seems that something is wrong with my /Boot/BCD, so I'm trying to recreate it from scratch. I've tried all the methods detailed here (including Windows repair which fails), and I'm left with the last one (near the bottom of that page). When I type the following command as in the tutorial: bcdedit.exe /import c:\boot\bcd.temp ...it fails with the following error: The store import operation has failed. The requested system device cannot be found. Many Google results say that I must use diskpart to set my partition active, however it's already set as active. Also, when I try this: bcdedit /enum It fails with similar message: The boot configuration data store could not be opened. The requested system device cannot be found. Does anyone know what does that error message mean, and what is the requested system device? I'd like to avoid having to reinstall Windows since all the files on disk seem to be fine.

Read the article

Search Results

Search found 2567 results on 103 pages for 'temp'.

Page 81/103 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88 | Next Page >

- by Anega

- by HAJJAJ

- by Seamus

- by pinaldave

- by Seamus

- by Rudy_TM

- by mrhatter

- by Chris Okyen

- by sirion

- by The Geek

- by Tomasz Kacprzak

- by Tomasz Kacprzak

- by JaneZhang(???)

- by chobo2

- by chobo2

- by Optimax

- by nachojammers

- by Touff

- by Shai Sherman

- by Hugh Allen

- by davidcl

- by Wayne Arthurton

- by mnemonic

- by Nico Huysamen

- by Domchi

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88 | Next Page >