Search Results

Search found 13692 results on 548 pages for 'bad practices'.

Page 82/548 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

  • Is it "right" to translate error messages?

    - by Iraklis
    This is somehow subjective depending on the target translation language, but bear with me for a sec. I have recently been involved in a translation project. The goal was to translate the strings of an MVC framework to the Greek language. 70% of the language strings of the framework where translated, however 30% where intentionally left out. The decision was that we will not translate error messages aimed towards the developer of the application. The reasoning behind this (in short) was: are aimed towards designers/programmers. Programmers ( and even designers :) ) should have a basic understanding of English, at least enough so they can search on it on Google if they do not know what it means. (racist?) are aimed towards the developer and in a perfect world should not be displayed to the end user of the application as they concern the inner workings of the web application itself. i.e "You must set the database name in your database config file." and perhaps most importantly, they make the life of the developer harder when he tries to get more information/help regarding the error. For example the above error yields 8 results in Google (in quotes), whereas its Greek translation yields exactly 0. I know that this depends on the popularity of the target translation language and the application itself. For example I'm guessing that there are is vast amount of documentation regarding German SAP error messages (i know, i know, SAP IS German, but you get the point), as opposed to Greek Error Messages documentation regarding random application X which has about 500 installations worldwide. So to summarize: When you develop language translation packs for your applications do you translate error messages? Do you only do for predominant languages like English/Spanish/German/French? Or do you live them intact? I'm not looking for the "right" or "correct" answer, I'm looking for a "best-practices" answer, or if this problem is defined in any "official" standard/policy that you have had experience with.

    Read the article

  • When to use @Singleton in a Jersey resource

    - by dexter
    I have a Jersey resource that access the database. Basically it opens a database connection in the initialization of the resource. Performs queries on the resource's methods. I have observed that when I do not use @Singleton, the database is being open at each request. And we know opening a connection is really expensive right? So my question is, should I specify that the resource be singleton or is it really better to keep it at per request especially when the resource is connecting to the database? My resource code looks like this: //Use @Singleton here or not? @Path(/myservice/) public class MyResource { private ResponseGenerator responser; private Log logger = LogFactory.getLog(MyResource.class); public MyResource() { responser = new ResponseGenerator(); } @GET @Path("/clients") public String getClients() { logger.info("GETTING LIST OF CLIENTS"); return responser.returnClients(); } ... // some more methods ... } And I connect to the database using a code similar to this: public class ResponseGenerator { private Connection conn; private PreparedStatement prepStmt; private ResultSet rs; public ResponseGenerator(){ Class.forName("org.h2.Driver"); conn = DriverManager.getConnection("jdbc:h2:testdb"); } public String returnClients(){ String result; try{ prepStmt = conn.prepareStatement("SELECT * FROM hosts"); rs = prepStmt.executeQuery(); ... //do some processing here ... } catch (SQLException se){ logger.warn("Some message"); } finally { rs.close(); prepStmt.close(); // should I also close the connection here (in every method) if I stick to per request // and add getting of connection at the start of every method // conn.close(); } return result } ... // some more methods ... } Some comments on best practices for the code will also be helpful.

    Read the article

  • How to design authentication in a thick client, to be fail safe?

    - by Jay
    Here's a use case: I have a desktop application (built using Eclipse RCP) which on start, pops open a dialog box with 'UserName' and 'Password' fields in it. Once the end user, inputs his UserName and Password, a server is contacted (a spring remote-servlet, with the client side being a spring httpclient: similar to the approaches here.), and authentication is performed on the server side. A few questions related to the above mentioned scenario: If said this authentication service were to go down, what would be the best way to handle further proceedings? Authentication is something that I cannot do away with. Would running the desktop client in a "limited" mode be a good idea? For instance, important features/menus/views will be disabled, rest of the application will be accessible? Should I have a back up authentication service running on a different machine, working as a backup? What are the general best-practices in this scenario? I remember reading about google gears and how it would let you edit and do stuff offline - should something like this be designed? Please let me know your design/architectural comments/suggestions. Appreciate your help.

    Read the article

  • C++ struct, public data members and inheritance

    - by Marius
    Is it ok to have public data members in a C++ class/struct in certain particular situations? How would that go along with inheritance? I've read opinions on the matter, some stated already here http://stackoverflow.com/questions/952907/practices-on-when-to-implement-accessors-on-private-member-variables-rather-than http://stackoverflow.com/questions/670958/accessors-vs-public-members or in books/articles (Stroustrup, Meyers) but I'm still a little bit in the shade. I have some configuration blocks that I read from a file (integers, bools, floats) and I need to place them into a structure for later use. I don't want to expose these externally just use them inside another class (I actually do want to pass these config parameters to another class but don't want to expose them through a public API). The fact is that I have many such config parameters (15 or so) and writing getters and setters seems an unnecessary overhead. Also I have more than one configuration block and these are sharing some of the parameters. Making a struct with all the data members public and then subclassing does not feel right. What's the best way to tackle that situation? Does making a big struct to cover all parameters provide an acceptable compromise (I would have to leave some of these set to their default values for blocks that do not use them)?

    Read the article

  • Organising files and classes in XCode (iPhone application)

    - by pulegium
    It's a generic question and really a newbie one too, so bear with me... I'm playing with some iPhone development, and trying to create a simple "flip type" application. Nothing sophisticated, let's say on the flip side is a short application summary, bit like 'help' and on the main screen is a simple board game, let's say tic-tac-toe or similar. Now, XCode has generated me 'Main View', 'Flipside View' and 'Application Delegate' folders, with default template files in them. Now the question is where do I create appropriate 'MVC' classes? Let's say (V)iew classes are going to be the ones that have been automatically created. So the Flipside view class is responsible for generating text/images etc on the 'help' view. 'Main View' class is what draws the items on the table and updates the counters, etc. Where should I place the 'controller' class? And also, should it only be dealing with proxying only to the model? According to this the controller method is called from the view and manipulates the method classes. Similarly, the results from model are passed back to the view class by the controller issuing the calls to appropriate view methods. Similarly, where does the model class go? or should I just create a new folder for each, controller and model class files? What I'm after is the best practices, or just a short description how people normally structure their applications. I know it's very specific and also undefined... I came from Django background, so the way stuff is organised there is slightly different. Hope this makes sense, sorry if it's all bit vague, but I have to start somewhere :) And yes I've read quite few docs on the apple developer site, but trouble is that the documents are either going into too much detail about the language/framework/etc and the examples are way too simplistic. Actually, this leads me to the final question, has anyone know any good example of relatively complete application tutorial which I could use as a reference in organising my files?...

    Read the article

  • How do software projects go over budget and under-deliver?

    - by Carlos
    I've come across this story quite a few times here in the UK: NHS Computer System Summary: We're spunking £12 Billion on some health software with barely anything working. I was sitting the office discussing this with my colleagues, and we had a little think about. From what I can see, all the NHS needs is a database + middle tier of drugs/hospitals/patients/prescriptions objects, and various GUIs for doctors and nurses to look at. You'd also need to think about security and scalability. And you'd need to sit around a hospital/pharmacy/GPs office for a bit to figure out what they need. But, all told, I'd say I could knock together something with that kind of structure in a couple of days, and maybe throw in a month or two to make it work in scale. If I had a few million quid, I could probably hire some really excellent designers to make a maintainable codebase, and also buy appropriate hardware to run the system on. I hate to trivialize something that seems to have caused to much trouble, but to me it looks like just a big distributed CRUD + UI system. So how on earth did this project bloat to £12B without producing much useful software? As I don't think the software sounds so complicated, I can only imagine that something about how it was organised caused this mess. Is it outsourcing that's the problem? Is it not getting the software designers to understand the medical business that caused it? What are your experiences with projects gone over budget, under delivered? What are best practices for large projects? Have you ever worked on such a project?

    Read the article

  • Automatically Organize Tags in Tax/Folksonomy

    - by Rob Wilkerson
    I'm working on a process that will perform natural language processing (NLP) on one--and potentially several--of our content rich sites. What I'd like to do once the NLP is complete is to automatically organize the output (generally a set of terms that you might think of as tags given the prevalence of that metaphor) into some kind of standard or generally accepted organizational structure. In a perfect world, I'd really like this to be crowd sourced under the folksonomy concept (as opposed to a taxonomy) since the ultimate goal is to target/appeal to real people rather than "domain experts", but I'm open to ideas and best practices. For the obvious purpose of scalability, I'd like to automate the population of this tax/folksonomy so that "some guy" in the team/organization isn't responsible for looking at a bunch of words (with or without context) and arbitrarily fleshing out the contextual components of the tree. I have a few ideas for doing this that require some research to establish viability, but I have exactly zero practical experience with this sort of thing so the ideas really just boil down to stuff I made up that might perform some role in accomplishing the task. Imagining that others have vastly more experience with this sort of thing, I'm hoping that I can stand on your shoulders. Thanks for your thoughts and insights.

    Read the article

  • Console Application Structure

    - by Paul Fox
    I've written several .Net Console Applications over the past 6 months and we have many more throughout different projects in our organization. I generally stick to the same standard format/structure for my Console Applications. Unfortunately, many of our console applications do not. I have been looking into ways of standardizing the structure of these Console Applications. I would also like to provide a framework for the basic structure of a Console Application and provide easy access to standard ways of handling things such as argument passing, logging, etc. Can anyone suggest Best Practices for addressing these concerns? I have been reading this MSDN article on Console Applications in .Net which suggests a Design Pattern for Console Apps. The example uses a Template Method pattern to handle some of the concerns I listed earlier. Two negatives of using this approach are listed in the article. Ending up with twice as many classes Having many simple, similar classes Can anyone suggest better, or more standard, ways of handling this? What about listing additional negatives with this approach?

    Read the article

  • Use of Java [Interfaces / Abstract classes]

    - by Samuel
    Hello, Lately i decided to take a look at Java so i am still pretty new to it and also to the approach of OO programming, so i wanted to get some things straight before learning more, (i guess it's never to soon to start with good practices). I am programming a little 2D game for now but i think my question applies to any non trivial project. For the simplicity i'll provide examples from my game. I have different kinds of zombies, but they all have the same attributes (x, y, health, attack etc) so i wrote an interface Zombie which i implement by WalkingZombie, RunningZombie TeleportingZombie etc. Is this the best thing to do? Am i better of with an abstract class? Or with a super class? (I am not planning to partially implement functions - therefor my choice for an interface instead of an abstract class) I have one class describing the main character (Survivor) and since it is pretty big i wanted to write an interface with the different functions, so that i can easily see and share the structure of it. Is it good practice? Or is it simply a waste of space and time? I hope this question will not be rated as subjective because i thought that experienced programmers won't disagree about this kind of topic since the use of interfaces / super classes / abstract classes follows logical rules and is thereby not simply a personal choice. Thank you for your time -Samuel

    Read the article

  • Wicket: Where to add components? Constructor? Or onBeforeRender?

    - by gmallett
    I'm a Wicket newb. This may just be my ignorance of the Wicket lifecycle so please enlighten me! My understanding is that Wicket WebPage objects are instantiated once and then serialized. This has led to a point of confusion for me, see below. Currently I have a template class which I intend to subclass. I followed the example in the Wicket docs demonstrating how to override the template's behavior in the subclass: protected void onBeforeRender() { add(new Label("title", getTitle())); super.onBeforeRender(); } protected String getTitle() { return "template"; } Subclass: protected String getTitle() { return "Home"; } This works very well. What's not clear to me are the "best practices" for this. It seems like onBeforeRender() is called on every request for the page, no? This seems like there would be substantially more processing done on a page if everything is in onBeforeRender(). I could easily follow the example of the other Wicket examples and add some components in the constructor that I do not want to override, but then I've divided by component logic into two places, something I'm hesitant to do. If I add a component that I intend to be in all subclasses, should I add it to the constructor or onBeforeRender()?

    Read the article

  • Why use shorter VARCHAR(n) fields?

    - by chryss
    It is frequently advised to choose database field sizes to be as narrow as possible. I am wondering to what degree this applies to SQL Server 2005 VARCHAR columns: Storing 10-letter English words in a VARCHAR(255) field will not take up more storage than in a VARCHAR(10) field. Are there other reasons to restrict the size of VARCHAR fields to stick as closely as possible to the size of the data? I'm thinking of Performance: Is there an advantage to using a smaller n when selecting, filtering and sorting on the data? Memory, including on the application side (C++)? Style/validation: How important do you consider restricting colunm size to force non-sensical data imports to fail (such as 200-character surnames)? Anything else? Background: I help data integrators with the design of data flows into a database-backed system. They have to use an API that restricts their choice of data types. For character data, only VARCHAR(n) with n <= 255 is available; CHAR, NCHAR, NVARCHAR and TEXT are not. We're trying to lay down some "good practices" rules, and the question has come up if there is a real detriment to using VARCHAR(255) even for data where real maximum sizes will never exceed 30 bytes or so. Typical data volumes for one table are 1-10 Mio records with up to 150 attributes. Query performance (SELECT, with frequently extensive WHERE clauses) and application-side retrieval performance are paramount.

    Read the article

  • Dealing with large number of text strings

    - by Fadrian
    My project when it is running, will collect a large number of string text block (about 20K and largest I have seen is about 200K of them) in short span of time and store them in a relational database. Each of the string text is relatively small and the average would be about 15 short lines (about 300 characters). The current implementation is in C# (VS2008), .NET 3.5 and backend DBMS is Ms. SQL Server 2005 Performance and storage are both important concern of the project, but the priority will be performance first, then storage. I am looking for answers to these: Should I compress the text before storing them in DB? or let SQL Server worry about compacting the storage? Do you know what will be the best compression algorithm/library to use for this context that gives me the best performance? Currently I just use the standard GZip in .NET framework Do you know any best practices to deal with this? I welcome outside the box suggestions as long as it is implementable in .NET framework? (it is a big project and this requirements is only a small part of it) EDITED: I will keep adding to this to clarify points raised I don't need text indexing or searching on these text. I just need to be able to retrieve them in later stage for display as a text block using its primary key. I have a working solution implemented as above and SQL Server has no issue at all handling it. This program will run quite often and need to work with large data context so you can imagine the size will grow very rapidly hence every optimization I can do will help.

    Read the article

  • How does an ASP.NET programmer go from working on/developing existing sites, to creating one from sc

    - by SLC
    I've been an ASP.NET developer for some time, always working on existing ASP.NET pages, modifying functionality, adding features, tweaking things etc. but have never built a site up from scratch. I've read books on ASP.NET, and they generally talk you through the various features of ASP.NET with a mock up site, but it's always very basic and they jump straight in. The time has come however, to write a site from scratch for a client. I've never done this before. There are design considerations, but like a lot of ASP.NET sites, the basic idea is, you have a site, where users can log in, and save some information like their name and password and address. The site has some functionality, but that's the basic design of a majority of (business-related) asp.net websites I would wager. I know how to program in ASP.NET already on an existing site, but I don't know how to design my own properly that meets the criteria above. I guess the main worry is security. I don't know the best way to handle a simple log-in system that stores user information like their name and password. I understand there are a few approaches to this, but the catch with this project is that it has to be absolutely bulletproof. Maximum security. All those good practices for security, it needs to have them all. I'm not asking what they are, but I am asking where to begin. What should be the first steps after I do File New Project ? Where can I look for information about setting up a secure ASP.NET website? I'll figure out the content and page layout later, it's the framework that is the big thing. Any and all advice would be welcome. I really want to get my first from-scratch project right from the beginning. Just to confuse things, it's possible I will be using MVC, I am not sure if this has any impact.

    Read the article

  • SQL Server: Why use shorter VARCHAR(n) fields?

    - by chryss
    It is frequently advised to choose database field sizes to be as narrow as possible. I am wondering to what degree this applies to SQL Server 2005 VARCHAR columns: Storing 10-letter English words in a VARCHAR(255) field will not take up more storage than in a VARCHAR(10) field. Are there other reasons to restrict the size of VARCHAR fields to stick as closely as possible to the size of the data? I'm thinking of Performance: Is there an advantage to using a smaller n when selecting, filtering and sorting on the data? Memory, including on the application side (C++)? Style/validation: How important do you consider restricting colunm size to force non-sensical data imports to fail (such as 200-character surnames)? Anything else? Background: I help data integrators with the design of data flows into a database-backed system. They have to use an API that restricts their choice of data types. For character data, only VARCHAR(n) with n <= 255 is available; CHAR, NCHAR, NVARCHAR and TEXT are not. We're trying to lay down some "good practices" rules, and the question has come up if there is a real detriment to using VARCHAR(255) even for data where real maximum sizes will never exceed 30 bytes or so. Typical data volumes for one table are 1-10 Mio records with up to 150 attributes. Query performance (SELECT, with frequently extensive WHERE clauses) and application-side retrieval performance are paramount.

    Read the article

  • .NET file Decryption - Bad Data

    - by Jon
    I am in the process of rewriting an old application. The old app stored data in a scoreboard file that was encrypted with the following code: private const String SSecretKey = @"?B?n?Mj?"; public DataTable GetScoreboardFromFile() { FileInfo f = new FileInfo(scoreBoardLocation); if (!f.Exists) { return setupNewScoreBoard(); } DESCryptoServiceProvider DES = new DESCryptoServiceProvider(); //A 64 bit key and IV is required for this provider. //Set secret key For DES algorithm. DES.Key = ASCIIEncoding.ASCII.GetBytes(SSecretKey); //Set initialization vector. DES.IV = ASCIIEncoding.ASCII.GetBytes(SSecretKey); //Create a file stream to read the encrypted file back. FileStream fsread = new FileStream(scoreBoardLocation, FileMode.Open, FileAccess.Read); //Create a DES decryptor from the DES instance. ICryptoTransform desdecrypt = DES.CreateDecryptor(); //Create crypto stream set to read and do a //DES decryption transform on incoming bytes. CryptoStream cryptostreamDecr = new CryptoStream(fsread, desdecrypt, CryptoStreamMode.Read); DataTable dTable = new DataTable("scoreboard"); dTable.ReadXml(new StreamReader(cryptostreamDecr)); cryptostreamDecr.Close(); fsread.Close(); return dTable; } This works fine. I have copied the code into my new app so that I can create a legacy loader and convert the data into the new format. The problem is I get a "Bad Data" error: System.Security.Cryptography.CryptographicException was unhandled Message="Bad Data.\r\n" Source="mscorlib" The error fires at this line: dTable.ReadXml(new StreamReader(cryptostreamDecr)); The encrypted file was created today on the same machine with the old code. I guess that maybe the encryption / decryption process uses the application name / file or something and therefore means I can not open it. Does anyone have an idea as to: A) Be able explain why this isn't working? B) Offer a solution that would allow me to be able to open files that were created with the legacy application and be able to convert them please? Here is the whole class that deals with loading and saving the scoreboard: using System; using System.Collections.Generic; using System.Text; using System.Security.Cryptography; using System.Runtime.InteropServices; using System.IO; using System.Data; using System.Xml; using System.Threading; namespace JawBreaker { [Serializable] class ScoreBoardLoader { private Jawbreaker jawbreaker; private String sSecretKey = @"?B?n?Mj?"; private String scoreBoardFileLocation = ""; private bool keepScoreBoardUpdated = true; private int intTimer = 180000; public ScoreBoardLoader(Jawbreaker jawbreaker, String scoreBoardFileLocation) { this.jawbreaker = jawbreaker; this.scoreBoardFileLocation = scoreBoardFileLocation; } // Call this function to remove the key from memory after use for security [System.Runtime.InteropServices.DllImport("KERNEL32.DLL", EntryPoint = "RtlZeroMemory")] public static extern bool ZeroMemory(IntPtr Destination, int Length); // Function to Generate a 64 bits Key. private string GenerateKey() { // Create an instance of Symetric Algorithm. Key and IV is generated automatically. DESCryptoServiceProvider desCrypto = (DESCryptoServiceProvider)DESCryptoServiceProvider.Create(); // Use the Automatically generated key for Encryption. return ASCIIEncoding.ASCII.GetString(desCrypto.Key); } public void writeScoreboardToFile() { DataTable tempScoreBoard = getScoreboardFromFile(); //add in the new scores to the end of the file. for (int i = 0; i < jawbreaker.Scoreboard.Rows.Count; i++) { DataRow row = tempScoreBoard.NewRow(); row.ItemArray = jawbreaker.Scoreboard.Rows[i].ItemArray; tempScoreBoard.Rows.Add(row); } //before it is written back to the file make sure we update the sync info if (jawbreaker.SyncScoreboard) { //connect to webservice, login and update all the scores that have not been synced. for (int i = 0; i < tempScoreBoard.Rows.Count; i++) { try { //check to see if that row has been synced to the server if (!Boolean.Parse(tempScoreBoard.Rows[i].ItemArray[7].ToString())) { //sync info to server //update the row to say that it has been updated object[] tempArray = tempScoreBoard.Rows[i].ItemArray; tempArray[7] = true; tempScoreBoard.Rows[i].ItemArray = tempArray; tempScoreBoard.AcceptChanges(); } } catch (Exception ex) { jawbreaker.writeErrorToLog("ERROR OCCURED DURING SYNC TO SERVER UPDATE: " + ex.Message); } } } FileStream fsEncrypted = new FileStream(scoreBoardFileLocation, FileMode.Create, FileAccess.Write); DESCryptoServiceProvider DES = new DESCryptoServiceProvider(); DES.Key = ASCIIEncoding.ASCII.GetBytes(sSecretKey); DES.IV = ASCIIEncoding.ASCII.GetBytes(sSecretKey); ICryptoTransform desencrypt = DES.CreateEncryptor(); CryptoStream cryptostream = new CryptoStream(fsEncrypted, desencrypt, CryptoStreamMode.Write); MemoryStream ms = new MemoryStream(); tempScoreBoard.WriteXml(ms, XmlWriteMode.WriteSchema); ms.Position = 0; byte[] bitarray = new byte[ms.Length]; ms.Read(bitarray, 0, bitarray.Length); cryptostream.Write(bitarray, 0, bitarray.Length); cryptostream.Close(); ms.Close(); //now the scores have been added to the file remove them from the datatable jawbreaker.Scoreboard.Rows.Clear(); } public void startPeriodicScoreboardWriteToFile() { while (keepScoreBoardUpdated) { //three minute sleep. Thread.Sleep(intTimer); writeScoreboardToFile(); } } public void stopPeriodicScoreboardWriteToFile() { keepScoreBoardUpdated = false; } public int IntTimer { get { return intTimer; } set { intTimer = value; } } public DataTable getScoreboardFromFile() { FileInfo f = new FileInfo(scoreBoardFileLocation); if (!f.Exists) { jawbreaker.writeInfoToLog("Scoreboard not there so creating new one"); return setupNewScoreBoard(); } else { DESCryptoServiceProvider DES = new DESCryptoServiceProvider(); //A 64 bit key and IV is required for this provider. //Set secret key For DES algorithm. DES.Key = ASCIIEncoding.ASCII.GetBytes(sSecretKey); //Set initialization vector. DES.IV = ASCIIEncoding.ASCII.GetBytes(sSecretKey); //Create a file stream to read the encrypted file back. FileStream fsread = new FileStream(scoreBoardFileLocation, FileMode.Open, FileAccess.Read); //Create a DES decryptor from the DES instance. ICryptoTransform desdecrypt = DES.CreateDecryptor(); //Create crypto stream set to read and do a //DES decryption transform on incoming bytes. CryptoStream cryptostreamDecr = new CryptoStream(fsread, desdecrypt, CryptoStreamMode.Read); DataTable dTable = new DataTable("scoreboard"); dTable.ReadXml(new StreamReader(cryptostreamDecr)); cryptostreamDecr.Close(); fsread.Close(); return dTable; } } public DataTable setupNewScoreBoard() { //scoreboard info into dataset DataTable scoreboard = new DataTable("scoreboard"); scoreboard.Columns.Add(new DataColumn("playername", System.Type.GetType("System.String"))); scoreboard.Columns.Add(new DataColumn("score", System.Type.GetType("System.Int32"))); scoreboard.Columns.Add(new DataColumn("ballnumber", System.Type.GetType("System.Int32"))); scoreboard.Columns.Add(new DataColumn("xsize", System.Type.GetType("System.Int32"))); scoreboard.Columns.Add(new DataColumn("ysize", System.Type.GetType("System.Int32"))); scoreboard.Columns.Add(new DataColumn("gametype", System.Type.GetType("System.String"))); scoreboard.Columns.Add(new DataColumn("date", System.Type.GetType("System.DateTime"))); scoreboard.Columns.Add(new DataColumn("synced", System.Type.GetType("System.Boolean"))); scoreboard.AcceptChanges(); return scoreboard; } private void Run() { // For additional security Pin the key. GCHandle gch = GCHandle.Alloc(sSecretKey, GCHandleType.Pinned); // Remove the Key from memory. ZeroMemory(gch.AddrOfPinnedObject(), sSecretKey.Length * 2); gch.Free(); } } }

    Read the article

  • SQL SERVER – Watch Online and Download – Inside of Next Generation SQL Server – Best Practices Analyzer using Microsoft Baseline Configuration Analyzer

    - by pinaldave
    I presented on subject Inside of Next Generation SQL Server – Denali online at Zeollar.com. This sessions are really fun as they are online, downloadable, and 100% demo oriented. I used SQL Server ‘Denali’ CTP 1 to present on the subject of What is New in Denali. My earlier session on the Topic of Best Practices Analyzer is also available to watch online here: SQL SERVER – Video – Best Practices Analyzer using Microsoft Baseline Configuration Analyzer I enjoyed presenting a lot on above two subjects. I would like to ask your opinion on the same. You can download the sessions and watch it yourself afterwords. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

    Read the article

  • Tuesday at Oracle OpenWorld 2012 - Must See Session: “Oracle Fusion Applications: Best Practices in Integration Design Patterns”

    - by Lionel Dubreuil
    Don’t miss this “CON8685 - Oracle Fusion Applications: Best Practices in Integration Design Patterns “ session: Speakers: Rajesh Raheja - Senior Director, Development, Oracle Ravi Sankaran - Director, Applications Development, Oracle Date: Tuesday, Oct 2 Time: 1:15 PM - 2:15 PM Location: Palace Hotel - Telegraph Oracle Fusion Applications provide various ways to integrate their functional capabilities with other Oracle applications as well as third-party and legacy applications. In this session, you will learn the patterns used when communicating with Oracle Fusion Applications with a SOA approach. It addresses items related to identifying the integration artifacts available, also known as assets, in Oracle Enterprise Repository; how to invoke synchronous and asynchronous Web services; importing and exporting bulk data; and any integration issues to look out for. The patterns will be applicable to on-premises and SaaS/cloud deployment modes and are indicated as such. Objectives for this session are to: Highlight the various ways to integrate with Oracle Fusion Applications Showcase use of Oracle Fusion Middleware technologies for integration Describe best practices and design patterns for integration

    Read the article

  • Tuesday at Oracle OpenWorld 2012 - Must See Session: “Oracle Fusion Applications: Best Practices in Integration Design Patterns”

    - by Lionel Dubreuil
    Don’t miss this “CON8685 - Oracle Fusion Applications: Best Practices in Integration Design Patterns “ session: Speakers: Rajesh Raheja - Senior Director, Development, Oracle Ravi Sankaran - Director, Applications Development, Oracle Date: Tuesday, Oct 2 Time: 1:15 PM - 2:15 PM Location: Palace Hotel - Telegraph Oracle Fusion Applications provide various ways to integrate their functional capabilities with other Oracle applications as well as third-party and legacy applications. In this session, you will learn the patterns used when communicating with Oracle Fusion Applications with a SOA approach. It addresses items related to identifying the integration artifacts available, also known as assets, in Oracle Enterprise Repository; how to invoke synchronous and asynchronous Web services; importing and exporting bulk data; and any integration issues to look out for. The patterns will be applicable to on-premises and SaaS/cloud deployment modes and are indicated as such. Objectives for this session are to: Highlight the various ways to integrate with Oracle Fusion Applications Showcase use of Oracle Fusion Middleware technologies for integration Describe best practices and design patterns for integration

    Read the article

  • Bad links point to old domain - should I disavow on new domain?

    - by user32573
    I am working with a site which we'll call www.newdomain.com, which was hit by Penguin this month despite no unusual practices. I found lots of really spammy links to their old site, www.olddomain.com, which 301s to the new domain. So I've gone through the process of identifying which links are really bad, made contact to ask for removal, and am at the stage of disavowing links. But wait! None of the bad links point to newdomain.com, and I worry that a disavow request via this domain in Webmaster Tools will damage something. Do the old band links affect the new site? If so, where do I disavow those old bad links? On Webmaster Tools for the new domain?

    Read the article

  • Uploadify with ruby on rails 'bad content body' 500 Internal Server Error

    - by Mr_Nizzle
    I'm Getting this error in my development log while uploadify is uploading the file and in the view i get an 'IO ERROR' beside filename. /!\ FAILSAFE /!\ Thu Mar 18 11:54:53 -0500 2010 Status: 500 Internal Server Error bad content body /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/utils.rb:351:in `parse_multipart' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/utils.rb:323:in `loop' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/utils.rb:323:in `parse_multipart' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/request.rb:133:in `POST' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/methodoverride.rb:15:in `call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.3/lib/action_controller/params_parser.rb:15:in `call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.3/lib/action_controller/session/cookie_store.rb:93:in `call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.3/lib/action_controller/reloader.rb:29:in `call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.3/lib/action_controller/failsafe.rb:26:in `call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in `call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in `synchronize' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in `call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.3/lib/action_controller/dispatcher.rb:106:in `call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/content_length.rb:13:in `call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/handler/fastcgi.rb:58:in `serve' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:103:in `process_request' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:153:in `with_signal_handler' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:101:in `process_request' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:78:in `process_each_request' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:77:in `each' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:77:in `process_each_request' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:76:in `catch' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:76:in `process_each_request' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:51:in `process!' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:23:in `process!' dispatch.fcgi:24 any idea on this?

    Read the article

  • WCF Restful services getting error 400 (bad request) when post xml data

    - by Wayne Lo
    I am trying to self host a WCF services and calling the services via javascript. It works when I pass the request data via Json but not xml (400 bad request). Please help. Contract: public interface iSelfHostServices { [OperationContract] [WebInvoke(Method = "POST", UriTemplate = INFOMATO.RestTemplate.hello_post2,RequestFormat = WebMessageFormat.Xml, ResponseFormat = WebMessageFormat.Xml, BodyStyle = WebMessageBodyStyle.Wrapped)] Stream hello_post2(string helloString); } Server side code: public Stream hello_post2(string helloString) { if (helloString == null) { WebOperationContext.Current.OutgoingResponse.StatusCode = System.Net.HttpStatusCode.BadRequest; return null; } WebOperationContext.Current.OutgoingResponse.StatusCode = System.Net.HttpStatusCode.OK; return new MemoryStream(Encoding.UTF8.GetBytes(helloString)); } JavaScript: function testSelfHost_WCFService_post_Parameter() { var xmlString = "<helloString>'hello via Post'</helloString>"; Ajax_sendData("hello/post2", xmlString); } function Ajax_sendData(url, data) { var request = false; request = getHTTPObject(); if (request) { request.onreadystatechange = function() { parseResponse(request); }; request.open("post", url, true); request.setRequestHeader("Content-Type", "text/xml; charset=utf-8"); charset=utf-8"); request.send(data); return true; } } function getHTTPObject() { var xhr = false; if (window.XMLHttpRequest) { xhr = new XMLHttpRequest(); } else if (window.ActiveXObject) {...} }

    Read the article

  • How do I MVVM-ize this MouseDown code in my WPF 3D app?

    - by DanM
    In my view, I have: <UserControl x:Class ... MouseDown="UserControl_MouseDown"> <Viewport3D Name="Viewport" Grid.Column="0"> ... </Viewport3D > </UserControl> In my code-behind, I have: private void UserControl_MouseDown(object sender, MouseButtonEventArgs e) { ((MapPanelViewModel)DataContext).OnMouseDown(e, Viewport); } And in my view-model, I have: public void OnMouseDown(MouseEventArgs e, Viewport3D viewport) { var range = new LineRange(); var isValid = ViewportInfo.Point2DtoPoint3D(viewport, e.GetPosition(viewport), out range); if (!isValid) MouseCoordinates = "(no data)"; else { var point3D = range.PointFromZ(0); var point = ViewportInfo.Point3DtoPoint2D(viewport, point3D); MouseCoordinates = e.GetPosition(viewport).ToString() + "\n" + point3D + "\n" + point; } } I really don't have a good sense of how to handle mouse events with MVVM. I always just end up putting them in the code-behind and casting the DataContext as SomeViewModel, then passing the MouseEventArgs on to a handler in my view-model. That's bad enough already, but in this case, I'm actually passing in a control (a Viewport3D), which is necessary for translating coordinates between 2D and 3D. Any suggestions on how to make this more in tune with MVVM?

    Read the article

  • How to handle ViewModel and Database in C#/WPF/MVVM App

    - by Mike B
    I have a task management program with a "Urgency" field. Valid values are Int16 currently mapped to 1 (High), 2 (Medium), 3 (Low), 4 (None) and 99 (Closed). The urgency field is used to rank tasks as well as alter the look of the items in the list and detail view. When a user is editing or adding a new task they select or view the urgency in a ComboBox. A Converter passes Strings to replace the Ints. The urgency collection is so simple I did not make it a table in the database, instead it is a, ObservableCollection(Int16) that is populated by a method. Since the same screen may be used to view a closed task the "Closed" urgency must be in the ItemsSource but I do not want the user to be able to select it. In order to prevent the user from being able to select that item in the ComboBox but still be able to see it if the item in the database has that value should I... Manually disable the item in the ComboBox in code or Xaml (I doubt it) Change the Urgency collection from an Int16 to an Object with a Selectable Property that the isEnabled property of the ComboBoxItem Binds to. Do as in 2 but also separate the urgency information into its own table in the database with a foreign key in the Tasks table None of the above (I suspect this is the correct answer) I ask this because this is a learning project (My first real WPF and first ever MVVM project). I know there is rarely one Right way to do something but I want to make sure I am learning in a reasonable manner since it if far harder to Unlearn bad habits Thanks Mike

    Read the article

  • Android 2.2 and "Bad address family" on Socket Connect

    - by Josh
    I have a fairly simple game that works perfectly on every version now up through 2.1, but with the new 2.2 (Froyo) release I am unable to create a socket. I am using the mina package for nio, and get this exception: W/System.err( 263): java.net.SocketException: Bad address family W/System.err( 263): at org.apache.harmony.luni.platform.OSNetworkSystem.connectStreamWithTimeoutSocketImpl(Native Method) W/System.err( 263): at org.apache.harmony.luni.platform.OSNetworkSystem.connect(OSNetworkSystem.java:115) W/System.err( 263): at org.apache.harmony.nio.internal.SocketChannelImpl.connect(SocketChannelImpl.java:272) W/System.err( 263): at org.apache.harmony.nio.internal.PipeImpl$SinkChannelImpl.finishConnect(PipeImpl.java:164) W/System.err( 263): at org.apache.harmony.nio.internal.PipeImpl.(PipeImpl.java:48) W/System.err( 263): at org.apache.harmony.nio.internal.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:51) W/System.err( 263): at org.apache.harmony.nio.internal.SelectorImpl.(SelectorImpl.java:141) W/System.err( 263): at org.apache.harmony.nio.internal.SelectorProviderImpl.openSelector(SelectorProviderImpl.java:58) W/System.err( 263): at java.nio.channels.Selector.open(Selector.java:48) W/System.err( 263): at org.apache.mina.transport.socket.nio.SocketConnector.startupWorker(SocketConnector.java:248) W/System.err( 263): at org.apache.mina.transport.socket.nio.SocketConnector.connect(SocketConnector.java:210) W/System.err( 263): at org.apache.mina.transport.socket.nio.SocketConnector.connect(SocketConnector.java:137) W/System.err( 263): at org.apache.mina.common.support.BaseIoConnector.connect(BaseIoConnector.java:40) Later in the log, usually immediately following I get this: W/System.err( 263): java.lang.NullPointerException W/System.err( 263): at org.apache.harmony.nio.internal.SelectorImpl.wakeup(SelectorImpl.java:418) W/System.err( 263): at org.apache.mina.transport.socket.nio.SocketConnector.connect(SocketConnector.java:222) W/System.err( 263): at org.apache.mina.transport.socket.nio.SocketConnector.connect(SocketConnector.java:137) W/System.err( 263): at org.apache.mina.common.support.BaseIoConnector.connect(BaseIoConnector.java:40) I have done all the googling and looking around I can think of and found nothing. The closest I have come seems to be an old JDK bug with ipv6 support on XP and Vista machines (I'm running Vista). Recommendations included disabling ipv6 (that did not work) and disabling ipv4 and leaving ipv6 (will not work for me as my router and ISP don't support it and so could not test anyway). Any thoughts, suggestions, things I have not tried? Thanks, Josh

    Read the article

  • Metaprogramming - self explanatory code - tutorials, articles, books

    - by elena
    Hello everybody, I am looking into improving my programming skils (actually I try to do my best to suck less each year, as our Jeff Atwood put it), so I was thinking into reading stuff about metaprogramming and self explanatory code. I am looking for something like an idiot's guide to this (free books for download, online resources). Also I want more than your average wiki page and also something language agnostic or preferably with Java examples. Do you know of such resources that will allow to efficiently put all of it into practice (I know experience has a lot to say in all of this but i kind of want to build experience avoiding the flow bad decisions - experience - good decisions)? EDIT: Something of the likes of this example from the Pragmatic Programmer: ...implement a mini-language to control a simple drawing package... The language consists of single-letter commands. Some commands are followed by a single number. For example, the following input would draw a rectangle: P 2 # select pen 2 D # pen down W 2 # draw west 2cm N 1 # then north 1 E 2 # then east 2 S 1 # then back south U # pen up Thank you!

    Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >