Search Results

Search found 2702 results on 109 pages for 'delphi units'.

Page 82/109 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

• Windows 2008 as home file server and more

  - by Christian W

  I currently have a freenas-unit as a NAS, and a Win2k8R2-unit as server. However I would like to consolidate these to units in one. What I really like about the freenas-unit is the ZFS filesystem. And the only reason I care about the ZFS filesystem is the easy way I can grow an existing filesystem just by inserting a new drive. How would this work in Win2k8? If I setup my unit with a separate drive as C: and a 1TB drive as D:. The D: would then be segmented into d:\Videos d:\Music d:\Pictures. When everything gets close to filling the storage-drive, I would like to expand the storage, but I wouldn't want to have E:\Videos or d:\Videos2 (using the NTFS folder mount thingy). I still want all my Videos to reside in D:\Videos and I want the OS to decide which drive it's going to be stored on... Some kind of on-the-fly jbod expansion :) Is this at all possible in Windows 2008?

  Read the article

• Cage nuts - which way to insert them?

  - by Ingmar Hupp

  Cage nuts can be inserted (in square holes) either with the flaps horizontal or vertical. I've seen and used both methods, but am still not sure which is best. Is there a recommended way of inserting them? If so, why is it the best way? From my own experience, the horizontal way (on the left) seems slightly better for no other reason than making it easier to insert or pry out the cage nut in a full rack (with the units above and below being populated), for example when replacing cage nuts with a snap-in rail. Edit: Major vendors each seem to have their own preference too: Horizontal: IBM, Cisco, APC Vertical: HP (and Compaq), Sun/Oracle, Dell

  Read the article

• Is it possible to upgrade Server 2008 to RDP version 6.1?

  - by Dmitri K.

  Problem Server 2008 has RDP 6.0, Server 2008 R2 has RDP 6.1. My application works with RDP ActiveX control 6.1, but does not work with version 6.0 - generates access violation from mstscax.dll. Is there any way to upgrade Server 2008 (not 2008 R2) with RDP 6.1? More details: my application is written in Delphi, the ActiveX control was generated from mstscax.dll version 6.1.7601.17514. Target system where the application doesn't work, has mstscax.dll version 6.0.6002.18356. When the application tries to connect, it generate an access violation exception in mstscax.dll. The way I see it is a compatibility problem. I appreciate any ideas on how to resolve this.

  Read the article

• replacing 3 Cisco Catalyst 4500

  - by hoberion

  Our network supplier recommends replacing our 3 cisco catalyst 4500's because they are EOL and dont speak OSPF (which we really want) Its not my area of expertise so I cant say for sure if we really need to replace these units but for my company the estimated costs of 250K euro is a huge problem. Is there any way to cut down on costs (without moving from cisco devices), I heard the 4500´s can speak ospf but would need an upgrade of sorts? edit: version: IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version 12.2(20)EW, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) supervisor: WS-X4013+ Cisco Catalyst 4500 Series Supervisor Engine II-Plus density: WS-X4306-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) WS-X4306-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45)

  Read the article

• D-Link DNS-323 NAS firmware update

  - by Mark Beaton

  Hi all, I've got a D-Link DNS-323 NAS enclosure holding a bunch of multimedia files that I've (possibly stupidly) just updated the firmware on, from 1.03 to 1.08. The updater indicated it applied the firmware patch successfully, but after rebooting it I can no longer get into it via the web interface, either via the static IP I had assigned it before the update, or by any of the DHCP-assigned addresses that I can see are currently assigned by my router. The unit just sits there, with the drives (2x512 set up as RAID-1) thrashing away seemingly forever... So, my question - has anyone had a similar experience with one of these units? Any advice etc? I've googled the hell out of it, and can't find anything useful.

  Read the article

• Root partition full? CentOS

  - by Joao Heleno

  Hi! I'm running CentOS 5.4 and my / is full. I wanted to install gparted but in order to do that I must install Priorities and it's when I get an error saying / is full so I can't go forward. Here's some output: fdisk -l Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 20315812 19365152 0 100% / /dev/sda3 211196248 49228164 151066780 25% /home tmpfs 1552844 0 1552844 0% /dev/shm I'm not using LVM. Please advise. Thanks

  Read the article

• Merge Visio files

  - by David Stratton

  I know I can do this manually by using copy/paste but I'm looking for a simpler way. Does anyone know of a quick and easy way to merge Visio documents? I have several Visio vsd files, all of which are the same internal document type (Flowchart - US Units). Each of these has between 1 and 15 pages. I'd like to combine them all into one Visio file. I'm using Visio for Enterprise Architects (11.4301.8221) so if there's a procedure for doing it in that version, that's what I'm looking for, but a 3rd party tool or a macro would work as well.

  Read the article

• HP Proliant DL360 G5 + MSA50 RAID Setup recommendations

  - by JohnRB

  I am running a HP Proliant DL360 2 x 3GHz Xeon 16GB Ram P400 integrated RAID card with 6 x 73GB SAS HDDs running Ubuntu Server 14.04 CLI only. I recently got my hands on a MSA50 SAS Enclosure (10 x SAS HDD bays w/ SAS in/out interface) and wondering what you guys recommended as far as an addon raid controller for one of the pciex slots. I have both slots free Full and Half sizes. Any suggestions are greatly appreciated, I am an I.T. Consultant but have not used these particular units before so I was hoping to hear from someone who has. Thanks!

  Read the article

• How to calculate running totals of subsets of data in a table

  - by John

  I have 4 columns: Name, Week, Batch and Units Produced (Cols, A,B,C,D). In column E, I need to keep running totals based on name and week. When the week changes for the same person, restart the total. Fred, 12, 4001, 129.0 Answer in e: 129.0 Fred, 12, 4012, 234.0 Answer in e: 363.0 Fred, 13, 4023, 12.0 Answer in e: 12.0 John, 12, 4003, 420.0 Answer in e: 420.0 John, 13, 4021, 1200.0 Answer in e: 1200.0 John, 13, 4029, 120.0 Answer in e: 1320.0 I need to be able to copy the formula to over 1000 rows.

  Read the article

• Run Wave Trusted Drive Manager from a bootable CD, recover crashed enrypted SSD?

  - by TigerInCanada

  Is there a way to run Wave Trusted Drive Manager from a live-cd to access a non-bootable SSD with Full Disk Encyption hard disk? http://www.wave.com/products/tdm.asp The crashed disk is a Samsung SSD PB22-JS3, 128Gb. Is has bad blocks at 128-block intervals. If the SSD password could be unset, is sending the unit for disaster recovery possible? What might cause a nearly new SSD to crash in this way, and what is the probability of it happening again? We have other units in service an I can do without every laptop disk in the company crashing...

  Read the article

• High fan speed after return from suspend (on Ubuntu)

  - by Bolo

  Hi, I've got a HP ProBook 5310m laptop with Ubuntu 10.04 (32 bit). When I return from suspend, the fan speed is usually very high: FDTZ sensor reports "90 °C". Yes, the units are wrong, since FDTZ does not report temperature, but fan speed – that's probably just a small bug in reporting. Interestingly, when I plug or unplug the power cable for a moment, the fan speed returns back to normal. My questions: Where can I report this problem? Is it about ACPI support in the kernel? What is the address of the relevant bug tracker? As a workaround for now, how can I programmatically trigger a behavior equivalent to (un)plugging the power cable. More generally, how can I force ACPI to recalculate fan speed? Ideally, I'm looking for something like echo foo > /proc/bar. Thanks in advance!

  Read the article

• Changing LDAP schema casts Confluence AD integration unoperable

  - by Maxim V. Pavlov

  I have had our instance of Atlassian Confluence configured to be integrated with our Active Directory. In AD, all the users were being created under default Users folder in Active Directory Users and Computers. We have decided to introduce cleaner separation and have created an Organizational Units structure in AD. Under root we have created Managed OU, and under it - Users OU and all user accounts were moved under Users OU. Now I though that to let the Confluence AD integration engine "know" where to look for user accounts now, I only need to adjust the BaseDN and prepand it with ou=Managed so it is aware that it is looking for cn=Users but under ou=Managed. That didn't work. How should I adjust LDAP schema root in a client application for it to be able to look for users in OU that then in a default folder.

  Read the article

• Which Power supply I should buy

  - by arayman

  I am going to buy a new PSU of CORSAIR for my IBM thinkcentre desktop. My previous original PSU was of 230 watts. I have not added any hardware in the CPU. It's in same condition as it was when I bought. On that basis, please suggest which power supply of Corsair and of how many watts will be suitable for me to buy, after referring to the under given weblink. http://www.corsair.com/en/power-supply-units.html Thanks.

  Read the article

• How to calculate Bradford Factors with Excel 2007?

  - by pnuts

  Bradford Factors are used by some to measure the significance of absenteeism and are computed for each individual as S squared * D where S is the number of spells (continuous periods of absence) and D is the sum of the days. The calculation is often made over a rolling 52 weeks. Commercial HR software often has the facility to calculate these factors but a Google search indicates quite a lot of interest without any free solutions. Using units of half a day and including any non-working days in each spell, how does one calculate the factors using Excel 2007?

  Read the article

• Various problems with software raid1 array built with Samsung 840 Pro SSDs

  - by Andy B

  I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

  Read the article

• Software that will burn DVDs with a SFV or Pararchive file for each disc?

  - by Matt

  I'd like to burn several thousand RAW files (.DNG) of around 10-30 MB each to DVD to backup my photo archive. I'm looking for software that can do this and include an SFV-type file on each disc burnt. These are my requirements: compression is optional, and probably not desirable due to the extra time involved files should be spread amongst the discs as self-contained units, i.e. I don't want to have to load files from more than one disc to be able to read the files on that disc, so that excludes WinRAR's spanning options I don't want to spend time writing ISO images first as this will be a task I'll need to repeat often as I add new images to my archive - the software should write to the DVDs for me as simply as possible I'd like the SFV/Pararchive/recovery record to be stored with the files on each disc, so it only references the files on that particular disk Thanks in advance!

  Read the article

• Thermal risks to other components when watercooling CPU

  - by B Sharp

  I recently ordered all the components for a new desktop system to replace my old, dying computer. I wanted to have a really quiet desktop, so I got a case rated for being quiet and opted to try a closed-system CPU water cooling kit (Antec Kuhler H2O 620) that was on sale for a very good price over the Thanksgiving weekend. Most of my components are still in transit, but I became somewhat worried when a friend mentioned that abandoning air cooling units can result in heat buildup inside the case due to heat generated by the video card and other components such as RAM, the northbridge, MOSFETs and voltage regulators radiating heat that the CPU fan would normally at least keep circulating around so it doesn't build up in localized areas. Is this a realistic problem? What other precautions should I take to remove heat from other components? Adding more case fans seems like it would get really noisy. Are there quiet alternatives?

  Read the article

• Should I limit end-user gigabit ports to avoid saturating uplink/trunk connections?

  - by Joel Coel

  We have a campus with 16 buildings and older 850nm 1Gbps fiber links between the buildings, that all come to a core switch for our servers that also uses 1Gbps ports. We're finally starting to replace our aging 10/100 end-user switches, and much of what we're looking at are 1 Gbps units. My question is, since the trunk/uplink lines are still 1Gbps, if I were to install 1 Gbps switches for end users, should I limit the ports to 100Mbps until I can also upgrade the trunks to avoid allowing a bad-behaving host to saturate a trunk line (since we're a college, we have plenty of mis-behaving hosts) and thereby create a DoS situation for a building, or will TCP congestion control typically take care of that for me? What if we have a lot of UDP traffic (games, video chats, even a small amount of bittorrent)?

  Read the article

• How to configure firewall to allow using a specific port

  - by user174416

  I am trying to make tcp ip connection to a server xxx.xxx.xxx.xxx with port xxxx. But I am getting error message "10061 connection refused". I think firewall on the server is stopping my program to access that port. How can I configure the firewall of server to allow my program to use that port. I had asked this question on stackoverflow (http://stackoverflow.com/questions/13448429/socket-error-while-making-tcp-ip-connection-in-delphi) where I was suggested to ask it on super user. Please provide me any solution....

  Read the article

• What kind of CPU/GPU integration is offered by APUs?

  - by clabacchio

  I'm truly fascinated by the idea of GPGPU and using the GPU for heavy processing. I'm seeing that also APUs (Accelerated Processing Units, CPU+GPU on the same chip) are gaining a consistent popularity. Are all of the APUs using a GPGPU? Can it be used for processing? And is it seamless or it requires special code (like Cuda) to have the hard work made by the GPU? I'm not interested in bare graphic performance, but more about how much the GPU can accelerate the "normal" CPU work.

  Read the article

• Lustre - is this bad form?

  - by ethrbunny

  Im going to be consolidating several 'server rooms' into a single installation soon. Part of this effort will be finding a home for 5Tb (and growing) of files / logs. To this end Im looking at Lustre and appreciating its ability to scale. The big vendors want to sell me a $20K SAN to manage this but Im wondering about buying several iSCSI units (like this http://www.asacomputers.com/3U-iSCSI-Solution.html) and using VMs for the OSS machines. This would let me fail-over to cover problems and not require a dedicated system for each OSS. Given articles like this (http://h30565.www3.hp.com/t5/Feature-Articles/RAID-Is-Dead-Long-Live-RAID/ba-p/1422) that talk about how RAID is not keeping up with drive density Im leaning towards more disks with lower capacity each. Again - some akin to the iSCSI array above. Tell me why this is a terrible idea. Do I really need to invest in a PE710 for each OSS/OST?

  Read the article

• Can't deploy an ejb bean on jboss

  - by leo

  I am try to deploy a jar to an jboss server. It works on my environment. But when I deployed the same jar on another server, i kept getting an error saying that the persistence unit is already registered. There is no other bean using the same name and the same persistence unit name. I tried to restart the server and remove the tmp, work, data directory but still get the same error. here is my error: ObjectName: jboss.j2ee:service=EJB3,module=wess_jpa.jar State: FAILED Reason: java.lang.RuntimeException: javax.management.InstanceAlreadyExistsException: persistence.units:unitName=dses_wess already registered. This is almost identical to this issue in jboss forum but there is no solution: http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4211687#4211687

  Read the article

• Installing GPSBabel on CentOS 5 x86_64

  - by Clint Chaney

  Well first let me say I have no clue about doing anything on my server, I ask my host to do all installs for me. I run a website where users store latitude and longitude coordinates in my database. I would like them to be able to download these waypoints to their gps units. I found a program called GPSBabel that allows this to be done. http://www.gpsbabel.org/ I want to be able to control GPSBabel from PHP using exec() or something along those lines. The problem is that the linux version of the program is a source file and they don't want to build or install it without some source of instructions. Does anyone have experience with installing this? Perhaps know someone that has and that can lead me in the right direction? Any help would be hugely appreciated. I'm pretty much stuck without getting this to work.

  Read the article

• Odd Apple AirPort Express behaviour

  - by MatthewD

  I've been using a rather old AirPort Express for home Wi-Fi for a number of years. (It's old enough that it only supports WPA, not WPA2 -- perhaps this is an indication that I should upgrade!) In the last week I've been experiencing very slow internet over the Wi-Fi. Suspecting that someone outside my home was leeching from me (despite a reasonable password and MAC address filtering turned on) I decided to change some settings: I changed the SSID, turned off broadcast of the SSID and changed the password. After these changes, I managed to connect using the new password on my iPad. But on the other devices I tried (iPhone, PS3) I was not able to connect. In fact, I only succeeded in connecting when I entered my OLD password! Is this a known issue with ancient AirPort Express units? Is my unit cracked and unrecoverable?

  Read the article

• How is fire spread in server rooms and datacenters?

  - by sharptooth

  Every now and then I read that a severe fire has happened in some datacenter, lots of equipment has been damaged and customers have gone offline. Now I wonder what is there to support and spread fire? I mean walls in a server room usually have little or no finish. Racks are made of metal. Almost all units have metal cases. Cables have (or at least should have) insulation of materials that don't spread fire. What is spreading fire in a server room or datacenter?

  Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >