Search Results

Search found 2372 results on 95 pages for 'flashing the bios'.

Page 82/95 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

  • Graphics and USB devices freezing soon after OS loads

    - by Andrew
    I run Ubuntu/Windows dual boot. Last night I started the upgrade to Ubuntu 12.04, and my computer has not worked since in either Windows or Ubuntu. Here's what I got when I rebooted after the upgrade, and continue to get every time I boot: Gets to GRUB screen OK. Choose Ubuntu - black screen or crazy purple lines. At first I assumed something went wrong with the upgrade (often happens). Choose Windows - works fine, I log in, but soon after that the graphics freeze (sometimes with purple artifacts). The keyboard and mouse (both USB) also lose power at the same instant, and none of the USB ports have power to them. This happens sooner or later every time I boot. Update: the HDD also appears to lose power at the same point. I have tried a live CD, but my computer refuses to boot any CD even after disabling all other boot options in the BIOS. I have disconnected everything except keyboard, mouse, graphics card with one monitor, one RAM sick and HDD; no change. I also took the little battery out to reset CMOS. I am pretty sure no matter how wrong the Ubuntu upgrade went, it wouldn't cause the above symptoms in Windows. So the only explanation I can think of is that a hardware failure occurred at the same time. Some possible causes of this I can think of are: A couple of days before this, I added a third screen (which worked fine). About a week before, my house lost power in a storm (no ill effects over the past few days though). What can I do, other than buy a new motherboard/CPU and hope it works? Unfortunately I don't have another box to swap parts into to test at the moment.

    Read the article

  • How do I install a different OS on a Compaq Presario cq56 with preinstalled SuSE 11?

    - by McCoy
    Thing is, I don't have a clue of Linux systems, I usually use WinXP. Bought a notebook with SuSE 11 on it, because I have my XP licence and thought I could install that if I found the chipset drivers for the hardware (which I'm not completely sure I have the right versions of). Then I thought I'd give it a shot with the SuSE, looked nice enough. But I can't get my external hd to work (tried force mount) and the banshee doesn't do anything like playing video. Since that is one of the two main purposes of this notebook, I need to get that to work. Tried downloading VLC player, but that only works with SuSE 11.1 upwards. So I downloaded a SuSE 11.3 and burned the iso. But surprise, no way the notebook would boot from cd. Same with the XP cd (considered setting up a dual boot). And no, I can't get to BIOS to reset to default, either. So I can basically do nothing else than going online with this thing and that's not enough for me (gamer in withdrawal, yikes!). I need at least to get to my firefox profile on the external hd and be able to watch video. Can somebody please help me? I think at this point I'd prefer to install XP and MAYBE the SuSE 11.3 after that. I'm not a native speaker, so please speak plainly, thanks. :) Edit: if this is impossible, could someone please help me with the external hd mount and video playback? Edit: Found out how to boot from cd by now. But still no XP, because I get bluescreen after bluescreen while setup is loading files. I guess it's the missing SATA drivers...

    Read the article

  • eee box "drobpox" server 24/7

    - by microspino
    I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have a Samsung A4 small laser printer, a HP500 Designjet Plotter, a Samsung Multifunction Machine (fax/print/scan/copy), a modern HP color A3 Deskjet printer and a HP laserjet A4 color printer. All of them need to be connected to this mini server. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: - If You have something similar running for a long time - If You disagree with this hardware choice and If You would suggest some other device. - If You see any issues with my printing setup - Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

    Read the article

  • Dual Monitor Setup with Ati Radeon Hd 5700 results in unusabledesktop win7

    - by NorthPole
    I have an ATI Radeon HD 5700 card which i've been using under fully updated windows 7 with its latest drivers. My monitor is a 2004 NEC LCD1703M which despite being pretty old runs fine. A friend gave me an IIYAMA ProLite E1900WS monitor (2009 or 20010 ). Both monitors are vga only. I've been using a DLDVI to VGA adapter to connect my old monitor and tested the same adapter to the new monitor and it worked fine. So I bought an HDMI to vga adapter with the purpose of having a dual monitor setup. But when both screens are connected to the card the following problem occurs: The monitor connected to the hdmi port cycles between sleep and a black screen while the other shows the operating system for about two seconds before getting black for another two seconds. I can "use" the computer (move the mouse,click,type e.t.c.) while this happens but its not something pleasant. I tried reinstalling the driver, booting with both screens connected (in which case the powerup messages and the bios are mirrored in both screens until I get to the login screen where everything falls apart) Funny thing is, everything works if I disconnect the ATI graphics card and use the onboard intel one. So, any suggestions as to what might be the problem and how I can fix it?

    Read the article

  • Dell XPS m1530 system cannot boot need 130w or greater

    - by KPS
    I have a Dell XPS M1530 and I lost my old AC adapter but ordered a new one. For the longest time it always had a battery charge so I was able to boot into the OS but now it is completely dead. I have a generic charger that slowly charged the laptop when it was in the OS but does not when the computer is off. When I boot up I get the following error: The AC power adapter type cannot be determined. The system can only boot with a 130 W power adapter or greater. Strike F1 key to shutdown. I cannot even enter the BIOs setup screen or boot menu, is there a way around this? I heard from the local tech that Dell has a special feature to boot from thumb drive before getting past the initial logo. I am doing my best to avoid purchasing a new charger since it worked just fine when the OS was running, I am hoping to get this thing going. Is there a way to charge the battery externally? Thanks in advance for any help!

    Read the article

  • Updating Dell PowerEdge firmware on Ubuntu?

    - by Shtééf
    The company I work for recently got hands on a batch of second hand PowerEdge SC1425 machines. We'd like to put these to good use. Our operating system of choice is Ubuntu Server 10.04 64-bit, which installs just peachy on this type of machine. Now I'd like to install the firmware updates from Dell, which are apparently marked as recommended. This includes the updates for the BIOS, the BMC, and possibly some other hardware. I find it incredibly difficult to locate the files on the Dell website, and install any of them on an Ubuntu system: I downloaded the file OM_6.2.0_SUU_A01.iso. I believe I've read that the SUU DVD should be able to update any recent PowerEdge. Is this correct? Is this the latest version? Besides the version number, does A01 have any meaning? Is this image bootable? (At the moment, I just nosed around with a loop device mount.) Running /bin/bash ./suu from the DVD, I get: # /bin/bash ./suu ./suu: line 262: ./java/linux/i386/bin/java: No such file or directory The file exists and is executable, though. But I cannot execute it directly from the shell either.

    Read the article

  • Windows 7 doesn't boot when second hard disk is connected

    - by kenshin9786
    I'm sorry for my bad english on beforehand. I have two hard disks, one SATA and another IDE. I have windows XP and 7 on the SATA one, and Ubuntu on the IDE. Both of them boots and works, bios recognizes them, just works. After I installed Windows 7, and connected the IDE drive, it freezes on "Starting Windows" (the black screen with the Windows logo). I unplug the IDE drive, and it starts normally. Windows XP starts normally on both situations (with or without the IDE one connected), same for Ubuntu (it works with both disks connected or just the IDE where it is). The IDE drive is on good status according to SMART. The IDE is first on boot order. It goes to the Ubuntu's grub first, then by default it goes to the Windows 7 bootloader, and then to XP. I think the problem is not about the bootloader or grub. I just read that it can be solved formatting the "problematic" hard disk because Windows 7 cannot handle so many active partitions or something like that. But that's not an option for me, I don't want to lose my Ubuntu nor have it unbootable. How can I solve this without this consecuences I mentioned? Any help would be appreciated.

    Read the article

  • Windows 7 64bits installation via USB asks for drivers

    - by Shikiryu
    I just bought a new config ( ASUS p8z68-v lx, i5-2500k + ram and new graphic card ). Coming back and installing it in my old computer, I just saw that my DVD player was on IDE (yup…). So, I needed to install windows 7 64bits from my usb key. Fine, I made my usb key bootable and copy the official DVD on it (the same version that was on my old computer), set BIOS to boot on it first and started the computer up. It worked fine until it asks me for cd/dvd drivers (which is funny since, I do it via USB because I can't plug in my DVD player :D) I have 3 SATA HDD plugged in and that's it. I made a small google search and found that it could be SATA or RAID drivers. Fine, I took another USB KEY and put all my motherboard drivers on it (from the CD sold with the MB) and none of those drivers seemed to work. I tried downloading new drivers from ASUS website and same effect. Any idea but no "buy a new DVD player", I'm now broke for the month :) ?

    Read the article

  • Computer won't boot from a bootable DVD

    - by JohnB
    My friend gave me his old computer that used to have WinXP on it. I'm trying to load Win7 on it and I thought there was something wrong because it wouldn't boot off a bootable disc, even though I setup the BIOS boot settings properly (I've done this sort of thing a million times). However, this closely related post helped me realize that I can boot off a bootable CD (WinXP), just not a DVD (Win7) Computer won’t boot from CD/DVD drive That might be the answer to my question, however, this motherboard is still pretty current technology. It's a good quality Gigabyte board, and judging from this product page, it came out in 2004. If I can't figure out a solution to my DVD boot problem, I'll have to try something like this: Boot and Install Windows from a USB thumb drive I guess it's possible that this motherboard doesn't allow booting from a DVD, but I still think that I might be missing something. It wouldn't be the DVD rom drive would it? I did try another drive and had the same results. However, I didn't try booting a DVD in the computer that the other test drive came out of, I'll do that later today. Any other advice? Thanks.

    Read the article

  • No digital audio output with Asus Xonar DG

    - by Lunatik
    I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

    Read the article

  • EEE PC dropbox server running 24/7

    - by microspino
    I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have Samsung SCX 4521F (fax/print/scan/copy), Samsung ML2010, HP Laser jet P1006, HP Color Laserjet CP1215, HP Office jet pro K8600, HP Design jet 500. All of them now are connected using little print servers and I want to get rid of them hooking everything to this mini server. The fax/print/scan/copy machine need to stay connected to a PC to make me able to use the software that comes with It. The mini server would save me on this too. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: If You have something similar running for a long time If You disagree with this hardware choice and If You would suggest some other device. If You see any issues with my printing setup Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

    Read the article

  • Accidentally mounted a ReiserFS drive as MBR on my windows box - how do I recover?

    - by Ryan
    I had a WD Netcenter with a 160GB drive that kept dropping off the network. I opened up the enclosure and removed the hard drive, connected to a Windows box without knowing the drive used ReiserFS.... When mounting on the Windows box, I chose "MBR" as filesystem. 70GB of data corrupted: 90% of data is word documents, excel spreadsheets, and jpg's - all mission critical. Attempted recovery on Linux box (ubuntu) using TestDisk: I could see the container, but couldn't get anything out – according to TestDisk this was because I chose "none" as filesystem. Attempted recovery using Nucleus Kernel Recovery for windows: 98% of what was recovered is incomplete and/or unusable. I need to know if a way exists to recover or rebuild original ReiserFS MBR, or what tools/techniques might give me the best results in recovering the data. Found a Windows version of TestDisk and I ran it yesterday - here are the results: TestDisk 6.14-WIP, Data Recovery Utility, May 2012 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sda - 160 GB / 149 GiB - CHS 19457 255 63 The harddisk (160 GB / 149 GiB) seems too small! (< 519 GB / 483 GiB) Check the harddisk size: HD jumpers settings, BIOS detection... The following partitions can't be recovered: Partition Start End Size in sectors > ReiserFS 3.6 62 241 8 19458 0 18 311581568 ReiserFS 3.6 62 248 55 19458 8 2 311581568 ReiserFS 3.6 62 254 37 19458 13 47 311581568 ReiserFS 3.6 63 6 28 19458 20 38 311581568 ReiserFS 3.6 63 13 11 19458 27 21 311581568 ReiserFS 3.6 63 21 43 19458 35 53 311581568 ReiserFS 3.6 63 27 41 19458 41 51 311581568 ReiserFS 3.6 63 37 35 19458 51 45 311581568 ReiserFS 3.6 63 54 20 19458 68 30 311581568 ReiserFS 3.6 63 76 26 19458 90 36 311581568

    Read the article

  • How can I get my SATA DVDs working again?

    - by user269051
    My hard drive crashed (WinXPpro), so I took a C drive from a broken PC. The new C drive is Win7pro. Motherboard is MSI K8N Neo4 Platinum, with 4 hard drives installed on SATA 1-4 (nForce4 Ultra); the two DVD drives are loaded on SATA 7-8 (Silicon Image SATARAID5). I've tweaked BIOS settings every which way. The closest thing to success was when each DVD had both a CD and a DVD icon, and blinked green. No CD or DVD could be read in either drive. I assume that the problem resulted from the fact that my new C drive does not have the RAID drivers? I've tried loading from the floppy (doesn't work). I can't boot off the DVD/CD, and switching the DVD's SATA cable to the SATA 3 slot (and pulling one of the hard discs) didn't work. I'd like to be able to use the other two available SATA slots for a mirrored RAID drive, and get my DVDs working again. Any suggestions?

    Read the article

  • Huge host CPU usage in idle vmware guest. Ubuntu 10.04 host, Vista SP2 guest

    - by themesandmodules
    I'm experiencing huge host CPU usage with an idle vmware guest. Host: Ubuntu 10.04 32-bit 2.6.32-24-generic-pae. (Very new install, i.e 24 hours ago) Hardware is Dell XPS M1530 laptop, 4GB ram. Intel Core II Duo T9300 2.50Ghz The virtualization setting "VT" or something is enabled in my bios. Guest: Completely fresh install of Windows Vista, upgraded to latest SP2 and all windows updates installed. 1024 - 1512MB ram allocated. Absolutely no other software installed on it, apart from VMWare tools. Situation When the guest is doing absolutely nothing, I watch with sysinternals process watch on the guest. This shows that system idle process is between 70 and 99%, usually around 95%. No actual process doing anything. On the host, I watch with top, I get cpu usage of 20% - 80%, usually around 30%. What I have tried Single and Dual processor available to guest - no change. Turn off all peripherals to guest - no network, drives, usb etc - no change. Turn off 3d acceleration for guest - perhaps a small improvement, or no change. Upping allocated ram to guest from 1024MB to 1512MB - no change. Yelling at vmware - no change. I have experienced a similar issue in the past, which was solved by setting the guest to have 1 CPU. This time that hasn't worked.

    Read the article

  • No OS will boot, all freeze

    - by Gyan
    This is for a computer with the following configuration: Asus P5KPL-AM/PS motherboard Pentium D 820 (dual core 2.8 GHz) 1 x 2 GB DDR2-800 Transcend RAM 1 SATA2 Samsung 160 GB HDD 1 PATA LG CD/DVD Writer PS/2 generic Keyboard USB Razer mouse The computer was working fine till a month ago with a Hitachi HDD in place of the Samsung. But that drive died and I sent it in for warranty replacement. Since then and till last week, the computer had not been turned on. I then got hold of a spare but XPSP2-loaded Samsung drive from another computer and decided to get this computer temporarily running. However, when I tried to boot into XP, it didn't load. It got stuck at the first graphical screen. When trying Safe Mode, the file list would be updated up to diskio.sys and then freeze. If I tried to boot Kubuntu off a CD, I would get past the first menu, but then get stuck at the subsequent graphical interface in the loading process. A similar thing happend with a friend's Windows XP-on-a-pen-drive. I switched the RAM into the other slot, but no luck. Then I booted the Ultimate Boot CD and ran Memtest86+ and a couple of the bundled CPU stress tests but these detected no errors. Some searching on the Internet brought up the notion of the CPU failing to switch from "real" to "protected mode". I'm hoping to get a fix on what the problem is and what I can do about it. Edit: I've flashed to the latest BIOS, but that doesn't help. Also, Knoppix LiveCD also freezes. I notice that the LED in my mouse goes off at the time of freeze, but trying to boot without the mouse connected produces the same result.

    Read the article

  • Laptop sleep: How to go into S3 easily?

    - by monov
    Laptop: Fujitsu-Siemens Amilo Pi-3525 OS: Vista When my laptop is plugged in and I close the lid, it goes into S1 sleep. This means that there is still: fan noise (annoying when trying to sleep at night) lots of power consumed (so if I then unplug the laptop and toss it in the bag, by the time I'm at school it's already drained and beeping ominously). What I want is S3 sleep, it solves both problems. I've found a roundabout way to go into S3 sleep: Unplug laptop Close lid (or click Sleep in Start menu) Plug laptop back in if needed The question: How do I force Windows to use always use S3 sleep when I close the lid? One thing I've tried is: dumppo admin minsleep=s3 (dumppo from here) Afterwards running just dumppo admin confirms that minsleep has been set, but closing the lid still goes into S1. Also, after a reboot, minsleep is reset to s1. I think dumppo is incompatible with Vista... MCE Standby Tool was recommended as a Vista-compatible alternative to dumppo, but it doesn't have any effect either. I looked in the BIOS settings, but there are no settings relating to ACPI sleeps/suspends there.

    Read the article

  • No digital audio output with Asus Xonar DG

    - by Lunatik
    I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

    Read the article

  • LSI MegaRAID LINUX got Optimal after degradation but strange POST message

    - by kesrut
    Linux server box with LSI MegaRAID controller got degraded. But after some time RAID status changed to Optimal. Adapter 0 -- Virtual Drive Information: Virtual Drive: 0 (Target Id: 0) Name : RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0 Size : 2.727 TB Mirror Data : 2.727 TB State : Optimal Strip Size : 256 KB Number Of Drives per span:2 Span Depth : 3 Default Cache Policy: WriteBack, ReadAdaptive, Cached, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Cached, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disk's Default Encryption Type : None Is VD Cached: No But now I'm getting RAID BIOS POST message: Your battery is either charging, bad or missing, and you have VDs configured for write-back mode. Because the battery is not currently usable, these VDs willl actually run in write-through mode until the battery is fully charged or replaced if it is bad or missing. (Image: http://cl.ly/image/1h1O093b1i2d) So may it be battery issue caused problem ? I get information about battery: BatteryType: iBBU Voltage: 4001 mV Current: 0 mA Temperature: 22 C Battery State : Operational BBU Firmware Status: Charging Status : None Voltage : OK Temperature : OK Learn Cycle Requested : No Learn Cycle Active : No Learn Cycle Status : OK Learn Cycle Timeout : No I2c Errors Detected : No Battery Pack Missing : No Battery Replacement required : No Remaining Capacity Low : No Periodic Learn Required : No Transparent Learn : No No space to cache offload : No Pack is about to fail & should be replaced : No Cache Offload premium feature required : No Module microcode update required : No Where can be problem ? I'm disabled alarms, but get them if enabled. But don't know how find root of problem.

    Read the article

  • Network Explorer Intermittently Fails to Display all Computers in Work Group

    - by graf_ignotiev
    I run a small computer lab of 10 computers and occasionally, when using the network explorer (a.k.a Network Browser) some or all of the remote computers will fail to appear. If I try to access a remote computer by its name I get an unspecified error (code 0x80004005), but I am still able to access it with the computer's IP address. The strangest part is that the problem will inexplicably go away after waiting awhile. Each computer is running Windows 7 x64 Enterprise and has identical hardware, software and configuration. They are all on the same subnet and in the same workgroup. I've spent days researching the problem and have tried the following solutions: Updated the BIOS, chipset and network adapter drivers Changed Power Settings in Network Adapter Properties so that the computer will not turn it off Disabled the Computer Browser service Changed the DHCP node type to broadcast Reviewed the Event Viewer logs Steps 3 and 4 have seemed to help the problem a little bit, but not completely. I'm beginning to suspect that the problem might lie with our router which is a ZyXEL ZyWALL 2WG, as the packets sent by Network Discovery may not be returning in time, but I wanted to get some perspective in the issue before I went any further.

    Read the article

  • Why does USB thumb drive screw up boot sequence?

    - by Carl B
    I am looking for understanding to a boot issue. I have at times had some files and such that I save and retrieve from my thumb drive. I use the front panel as it is nice and easy to get to and I typically power down my system nightly. If I forget to pull the drive and power on the system, it becomes the first bootable device. As there is no OS on the USB Drive I get the BOOTMGR is missing press CTRL+ALT+DELETE. When I go into BIOS to see Boot sequence, there’s the thumb drive up top, DVD drive is missing and not found in the list of devices. All of the hard drives are next in line. When I pull the USB drive, and reboot, everything is back to normal. Old boot sequence is in place, DVD drive right where it should be and no issues. So why does this happen with a USB drive in port at boot up? If it can’t be booted from, shouldn’t the next drive be attempted? Note: This happens when the thumb drive is plugged into a USB port on the front panel. It does not seem to happen on rear panel ports.

    Read the article

  • None of usb-controllers are working after a crash

    - by Cray
    So I have a GA-p35-DS4 mboard with a Q6600, running windows7-x64. After a random crash with a bluescreen (not caused by anything particular as I recall), none of the usb-controllers are working. (And none of the devices connected to those usb ports). All the controllers are showed up in the device manager, but every one has a warning-icon (as they are not functioning properly). The windows identifies them correctly, it shows exactly the model of each controller, and it says that the driver is installed. Now, when I try to reinstall the driver (Update driver menu item in the device manager), it tries to find it, finds the driver, but quits saying that the driver was found but could not be installed. Additionally, it displays "This operation requires an interactive window station", whatever that means... Now get this, the same thing happens with a new pci-usb controller card! It is found (actually each time the machine starts, it is found as new hardware), but trying to install drivers leads nowhere, I am getting the same message about an interactive window station. (tried to install drivers from the acoompanying CD) I have tried deleting those devices from device manager and let windows find them again, but that leads to same results. None of the ports on this extension card work either. This should not be a hardware problem, a usb keyboard connected to the builtin usb controller works in bios, and even in another OS running the same computer (old xp installation) What to do? Will I have to reinstall? Can deleting infcache.1 help? Is there some way to let windows remove all old drivers and try to find all hardware again, this time only looking for drivers on a windows install disk or something?

    Read the article

  • Why doesn't the monitor output anything in Linux console mode?

    - by flypen
    I install Linux without graphics support. Previously I used a monitor with 720p support. And it can display normally. Now I change to a monitor with 1080p support. I can see BIOS and GRUB info on monitor, and kernel messages in early stages. However, the monitor says that there is no input immediately, and then I can't see anything again. It seems that it happens after something initializes. Is it related to vesafb? vesafb: mode is 1280x1024x32, linelength=5120, pages=0 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 mtrr: type mismatch for 7f800000,800000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,400000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,200000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,100000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,80000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,40000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,20000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,10000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,8000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,4000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,2000 old: write-back new: write-combining mtrr: type mismatch for 7f800000,1000 old: write-back new: write-combining vesafb: framebuffer at 0x7f800000, mapped to 0xffffc90011380000, using 5120k, total 5120k Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device

    Read the article

  • CentOS networking BNX2

    - by james moore
    Having some trouble with my NICs. The server starts fine and I can wget/ping etc. However, when I /etc/init.d/networking restart I then receive the following error: Bringing up interface eth0: bnx2: fw sync timeout, reset code = 1030009 SIOCSIFFLAGS: Device or resource busy Consequently, the task fails. I have searched around on google users suggesting to disable PNP in the BIOS but I see no option. Here is some system information: $ ethtool -i eth0 driver: bnx2 version: 2.0.8-rh firmware-version: bc 2.9.1 $ uname -a Linux host 2.6.18-238.9.1.el5 #1 SMP Tue Apr 12 18:10:13 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux $/sbin/lspci | grep Broadcom 04:00.0 PCI brodge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5700 Gigabit Ethernet (rev 12) 08:00.0 PCI brodge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5700 Gigabit Ethernet (rev 12) $ lsmod | grep bnx2 bnx2i 81704 0 cnic 109512 1 bnx2i libiscsi2 77765 6 be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi_tcp scsi_transport_iscsi2 73945 8 be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2 bnx2 224780 0 scsi_mod 199001 15 mpt2sas,scsi_transport_sas,mptctl,be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2,scsi_transport_iscsi2,scsi_dh,sg,libata,megaraid_sas,sd_mod $ rmmod bnx2; modprobe bnx2 PCI: Enabling device 0000:05:00.0 (0158 -> 015a) PCI: Enabling device 0000:09:00.0 (0158 -> 015a) bnx2: fw sync timeout, reset code = 10300003 Any help would be appreciated as I am at a loss.

    Read the article

  • Why do I get a DegradedArray event with mdadm

    - by azera
    Hello Just so we're clear on what's happening: I bought 4 new sata 2 drives, with the intent of using them in a raid5 all drive are fully recognised by both my bios and my linux box (gentoo) I created a raid5 array, fiddled a bit with it to understand how it works, how to monitor ect At some point, this triggered a degradedarray event, even though the array is brand new. I tried to stopping the array and recreating a new array with the same drive but the new array starts degraded too. here is what I used to create it mdadm --create -l5 -n4 /dev/md/md0-r5 /dev/sdb /dev/sdd /dev/sde /dev/sdf here are the output from my /proc/mdstat and mdadm --detail --scan **mdstat** Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md127 : active raid5 sdf[4] sde[2] sdd[1] sdb[0] 4395415488 blocks level 5, 64k chunk, algorithm 2 [4/3] [UUU_] [>....................] recovery = 2.8% (41689732/1465138496) finish=890.3min speed=26645K/sec unused devices: <none> **detail** ARRAY /dev/md/md0-r5 metadata=0.90 spares=1 UUID=453e2833:81f22a74:64188b84:66721085 As such I have a couple questions: does a raid5 array always start in degraded mode at first ? why does sdf have the number 4 between bracket instead of 3, why does it see a spare disk and why is the 4th drive marked with _ instead of U ? (bad configuration ?) How can I recreate the array from scratch, do i have to format each drive on its own before recreating it ? Thanks for any help, I'm not sure about what I should do at the moment

    Read the article

  • ESX Scheduler and NUMA issue

    - by babyg_wc
    On our 24 core bl685 (4sockets x 6core), we find that NUMA nodes 0 and 1 are pretty busy (unfortunately resulting in elevated cpu ready times on the VMS), whilst NUMA nodes 2 and 3 are almost unused. I thought this just maybe a ESX4 U1 issue, so I had a colleague with a 32 core (dl785) farm investigate, and it seems that his last 3 or 4 NUMA nodes are also not really being utilised. ESX seems to have a weakness when it comes to balancing lightly loaded NUMA boxes, Im going to enabled node interleaving in the BIOS and see if the scheduler balancers across all 24 cores, instead of just 12!... For those of you with large core counts, I would suggest you fire up you viclient, and check Physical CPU useage (or esxtop), I would be interested to hear what your results are. Please note, that its only the lightly loaded (eg less than 30% cpu load on the esx host) that seems to have the biggest issue with load imbalance. Thoughts/comments. PS ive logged a SR with vmware to assist, also the other "problem" could be that we have 128gb of ram in each host, and therefore the scheduler sees no good reason why it shouldnt try and cram all vms's into the first two NUMA nodes, as we only have around 50gb of ram worth of vms on each host...

    Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >