Search Results

Search found 19055 results on 763 pages for 'high performance'.

Page 82/763 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

• Improve wireless performance

  - by djechelon

  Hello, I have a Trust Speedshare Turbo Pro router, which is running on channel 6. I found that the wireless signal (and network performance) dramatically drops from my PDA (I can barely attach to the network, even if I set the PDA's energy settings to maximum wireless performance) when I even exit my room, and I don't have shielded walls or something like that. I can't even stream a SD video from my desktop (connected via LAN) to my laptop using WiFi, while via LAN it works fine. I read that changing router's channel could improve performance due to interference reducing. I found that almost all wireless networks around here run on channels 6 and 11. I tried to go to my router's settings page to change channel, but I found that the combo box only allows me to select 6!! I'm not sure, but I may have been able in the past to change channel, though not to all of the available channels. A few minutes ago I tried a firmware upgrade, but it didn't solve my problem. My question is Is it possible that my router is someway locked to its channel? I bought it on my own, I didn't receive it from my ISP Apart from boosting the antenna power to the maximum (which, by the way, increases the EM radiation my and my family's bodies absorb 24/7 and is little more environment-unfriendly), do you have any tips on getting high quality transmission up to 5 metres from the antenna? Thank you

  Read the article

• WSUS performance for unneeded updates

  - by mhouston100

  We have a WSUS server serving around 300 PC's and a couple of dozen servers and a discussion came up at work as to what products to include. We have a single SQL 2005 instance on one of the servers and it has NEVER been updated. My first thought was to just tick the box for SQL 2005 and let WSUS do it's thing to upgrade to the latest service pack at least. One of the other guys here has the opinion that having updates that are relevant to only a small selection of hosts would effect the performance of WSUS as a whole, claiming that each update does a 'check' against all the hosts or something similar. My argument is that manually updating these servers is obviously not working as the admins are not paying attention to what is needed. So my question is: Do updates that only effect a sub-set of the hosts effect the overall performance of the WSUS server in relation to ALL the hosts? (disk space is not an issue at this point) Is there any performance justification for or against manually updating small amounts of products? Basically I'm needing a rebuttal against his argument and I'm unable to find any concrete documentation to prove him wrong.

  Read the article

• Need help trouble shooting high CPU usage by PHP-fpm

  - by user432506

  There is a problem that is driving me crazy. After the day I tried to fix the CPU usage problem of my VPS, the CPU load has grown from 60% to 150%, and I have no idea what causes the problem. Please help me. I had installed a copy of mediawiki on a Linode 1024. The wiki is running on Niginx + PHP-fpm + MySql. The wiki doesn't have much traffic, only around 4000 requests/day, mostly from Google and Bing bots. It had been using around 60% (of total 400% on the Linode) of the CPU before. I thought it was a bit high, so two day ago, I was trying to fix the problem (not knowing what was waiting for me). I did nothing but added a new empty line to wiki's configure file, which would change the modified time of the configure file, and then all the cached page files would be set invalidated. I had done that before, and that would cause high CPU usage, but normally it would take only hours to let things back to normal again. Not this time, my CPU usage has been around 150% for more than two days. It is php-fpm using most of CPU reassures. Using 100% of three cores is not rare. I hadn't seen that before. There are other sites on the Linode, but it should be the wiki. Because if I offline the wiki, CPU usage will drop back to around 40% soon. The day I also duplicated php-fpm.conf, and opened it, but didn't changed it. I have no idea what I did wrong. I here ask for help to save myself from being crazy!!! It is php-fpm. Is there a way to find out what is it doing? I mean like which scripts are related and what function codes are running? top: top - 06:34:33 up 10 days, 4:23, 2 users, load average: 1.10, 1.24, 1.37 Tasks: 76 total, 4 running, 72 sleeping, 0 stopped, 0 zombie Cpu(s): 61.1%us, 3.1%sy, 0.0%ni, 32.8%id, 2.9%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 1028684k total, 945192k used, 83492k free, 89580k buffers Swap: 524284k total, 18084k used, 506200k free, 530380k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 26721 www-data 20 0 208m 54m 34m R 99 5.4 0:09.07 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26592 www-data 20 0 207m 45m 26m R 91 4.5 0:12.77 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26706 www-data 20 0 196m 43m 34m S 47 4.3 0:15.19 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26583 www-data 20 0 197m 45m 35m S 33 4.5 0:19.08 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26787 www-data 20 0 206m 36m 18m R 25 3.7 0:00.41 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26661 www-data 20 0 207m 46m 26m S 13 4.6 0:19.87 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 1971 mysql 20 0 155m 57m 3952 S 8 5.7 383:57.81 /usr/sbin/mysqld 242 root 20 0 0 0 0 S 1 0.0 0:51.36 [kworker/3:1] 5711 root 20 0 139m 95m 580 S 1 9.5 0:41.30 /usr/local/bin/memcached -d -u root -m 128 -p 11211 19463 root 20 0 190m 3984 1284 S 1 0.4 0:02.66 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 29100 www-data 20 0 10928 5540 820 S 1 0.5 4:49.05 nginx: worker process vmstat 30 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 16912 81456 90784 554172 0 0 4 6 3 2 11 1 87 1 0 0 16912 78036 91000 555356 0 0 38 34 1397 375 12 1 87 0 4 0 16912 31776 91528 557508 0 0 78 42 3197 487 45 1 52 1 1 0 16912 83356 91768 558576 0 0 35 56 2608 449 32 1 67 1 1 0 16912 81548 92040 559720 0 0 41 31 1243 432 8 1 91 1 2 0 16912 53056 92332 562744 0 0 105 33 2013 581 17 1 81 1 2 0 16912 73236 92552 564844 0 0 68 36 1968 615 16 1 82 1 0 0 16912 91612 92904 566676 0 0 69 35 1845 692 13 1 85 1 1 0 16912 71248 93180 568428 0 0 58 33 1952 604 15 1 82 1 1 0 16868 55952 93516 572660 1 0 144 42 1801 637 12 1 86 1 2 0 16868 48324 94416 577844 0 0 189 66 2058 702 17 1 80 2 1 0 16928 58644 94592 578184 0 2 160 49 2578 723 25 1 70 3 5 0 16928 22600 94980 580568 0 0 89 32 1496 361 13 0 85 1 0 0 16988 49256 94500 576396 0 2 41 37 1601 426 14 1 85 0 5 0 18084 24336 86032 502748 0 37 83 68 2989 562 42 1 56 0 1 0 18084 123604 86376 506996 0 0 118 41 2201 573 22 1 76 1 2 0 18084 126984 86752 508876 0 0 64 53 1620 490 13 1 85 1 2 0 18084 103104 87148 510768 0 0 71 37 2757 602 33 1 64 1

  Read the article

• Linux: setting up an elite/high-anonimity Web proxy on a dedicated server

  - by YellowSquirrel

  I'm renting a dedicated server which I'd like to use to "surf the Web": basically I want to always surf the Web from the same static IP (the one of my dedicated server). I can do it by running Xvnc/FreeNX on the dedicated server, but this is kinda slow and clumsy (I tried it). What are the steps needed to install an "elite/high-anonimity" Web proxy on a dedicated (Debian) Linux server knowing that my two requirements are: I'm the only person that needs access to the proxy all I want is that my broadband (dynamic) IP is completely hidden (I want to always surf from my dedicated server's IP). Note that using the static IP people can find my domains and my real name and I'm perfectly fine with that (actually it is what I want). What I don't want is people knowing from which dynamic IP (broadband) I'm connecting. What are the steps needed to do that? (basically I don't care about "anonimity", what I want is to appear to surf from a static IP and I think I need what is called an "elite" Web proxy to do that, but I'm not sure) Technical infos and sample configuration most welcome :)

  Read the article

• Very High Interrupt CPU usage in Win2k3 VM on vSphere

  - by Darragh

  Hi, I've been testing some software in a server virtual environment and I've noticed I get a huge amount of CPU usage on the Interrupts process. My question is, how does this relate to the virtual hardware platform as the rate is allot lower in a real system. Some how the hypervizor scheduler works hard to over come this problem but not as well as on real hardware does. Obvious things are high I/O and disk access but this application mostly just sits and works in memory allot. If anyone has experienced the same, please let me know. thanks in advance Screenshot: Process Explorer

  Read the article

• Suggestions for a nice&small - high battery life programmer notebook

  - by Emir

  Hi guys, I'm planning to buy a new notebook since the Toshiba I have now sucks in battery life. I'm a web designer & programmer, and the main features of the notebook should be: High battery life Small, 13.3" or 14" screen A fast processor and RAM that won't let me down while multi-tasking Anything other than these is secondary, I wouldn't like it to be very pricey though :) I'm now leaning towards Macbook Pro 13.3", 2.66 Ghz; it has 10 hours of battery life. However, I mostly develop on Windows, so I don't know how many hours of battery will I get if I run Windows 7 on Bootcamp. Your ideas and suggestions will be much appreciated.

  Read the article

• php-cgi cpu usage is super high

  - by Ryan Thompson

  I am getting constantly high and wildly fluctuating CPU usage % for php-cgi commands as seen via "top" on my Centos server.. I have a server density account and it seems that this is a common trend: User - PID - CPU % - MEM % - VSZ - RSS - TT - Stat - Started - Time - Command 500 - 6389 - 22.4 - 3 - 271136 - 32380 - ? - S - 20:26 - 0:40 - /usr/bin/php-cgi Seems there are about 6 or so of those records in my processes list at any given check-in. Any ideas what's causing this? I have fast_cgi installed and the module is loading.. Not sure why it isn't handling this though. Any help would be greatly appreciated! Ryan

  Read the article

• QoS - split bandwidth across all IPs during high load

  - by Matthew Iselin

  We have a Linux-based router which is currently working fairly well, but our network only has a 1.5 mbps incoming connection. The network is small, but during high load periods some systems can end up dominating the bandwidth. For example, a client downloading a file can easily saturate the connection leaving everyone else with barely any access to the outside world. Naturally, I'd like to fix this. I believe a combination of iptables rules and tc is in order, but I have no idea how to go about distributing the bandwidth evenly across the clients. It would be nice if there was a way to divide the bandwidth only across clients that are actually utilising the connection as well, rather than hard limit each connection to (bandwidth / number of clients).

  Read the article

• X-Window Modeline for high resolution modes on NEC LCD 22WV monitor

  - by Jakub Narebski

  What should look like X Window System (X.Org) modeline to be put in xorg.conf, for high resolution (incuding recommended 1680x1050 @ 50Hz resolution) for 22" NEC LCD 22WV monitor? X.Org autodetect correctly only 800x600 and lower resolution SVGA modes, unfortunately. How can I generate proper "Modeline" line for xorg.conf? Is information included in NEC_Datasheet_LCD22WV-english.pdf enough (found on NEC LCD 22WV product info page)? What tools there are available to generate proper modeline for a LCD monitor for Linux? MS Windows (MS Windows XP Home) correctly detects and use 1680x1050 resolution; can I somehow get modeline information from MS Windows?

  Read the article

• Hyperthreading vs. SQL Server & PostgreSQL

  - by IanC

  I have read that hyperthreading is a "performance killer" when it comes to DBs. However, what I read didn't state which CPUs. Further, it mostly indicated that I/O was "cut to < 10% performance". That logically doesn't make sense since I/O is primarily a function of controllers and disks, not CPUs. But then no one ever said bugs made sense. What I read also stated that SQL Server could put two parallel query ops onto 1 logical core (2 threads), thereby degrading performance. I have a hard time believing SQL Server's architects would have made such an obvious miscalculation. Does anyone have and data on how hyperthreading on current generation CPUs affects either of the RDBMSs I mentioned?

  Read the article

• Diagnosing high CPU waiting

  - by Will

  I have a monitoring server that is running icinga/collectd/graphite with about 50 hosts. I have noticed high load/slugging performance on the box. If you take a look at top, you'll see: Cpu(s): 0.6%us, 0.2%sy, 0.0%ni, 7.6%id, 23.4%wa, 0.0%hi, 0.2%si, 0.0%st Notice the HUGE %wa value, which as far as I know means a network or disk bottleneck. ifconfig shows no dropping packets and there's not a ton of bandwidth going on, so that leaves disk issues, right? There's not a lot of disk writing going on either...iotop is reporting we're only writing a little over 1 MB per second and the RAID tool reports everything is A-OK and write caching is enabled. How do I go about trying to figure out how to fix this? UPDATE: iostat -x output is: avg-cpu: %user %nice %system %iowait %steal %idle 0.62 0.10 0.31 9.65 0.00 89.31 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.21 33.34 83.55 16.54 1599.94 399.07 19.97 43.21 416.98 3.71 37.13

  Read the article

• CentOS 7: PHP high CPU usage

  - by HTF

  I've migrated Observium monitoring platform from CentOS 6.5 to CentOS 7 and I've noticed high CPU usage mostly caused by PHP, the CPU load increase when pooling script is running (poller-wrapper.py). Both VMs are running on the same physical host (KVM hypervisor) with exactly the same spec. I also tested this with a simple PHP benchmark script and CentOS 7 is slower - is it strictly related to PHP version (5.4.30 vs 5.4.16)? CentOS 6.5 [root@centos6:~]# php -f bench.php -------------------------------------- | PHP BENCHMARK SCRIPT | -------------------------------------- Start : 2014-08-19 22:26:34 PHP version : 5.4.30 Platform : Linux -------------------------------------- test_math : 1.610 sec. test_stringmanipulation : 1.416 sec. test_loops : 0.822 sec. test_ifelse : 0.729 sec. -------------------------------------- Total time: : 4.577 sec. CentOS 7 [root@centos7:~]# php -f bench.php -------------------------------------- | PHP BENCHMARK SCRIPT | -------------------------------------- Start : 2014-08-19 22:27:58 PHP version : 5.4.16 Platform : Linux -------------------------------------- test_math : 2.117 sec. test_stringmanipulation : 1.246 sec. test_loops : 1.174 sec. test_ifelse : 0.752 sec. -------------------------------------- Total time: : 5.289 sec. CPU usage increased right after migration:

  Read the article

• High Availability Configuration using Heartbeat and Pacemaker

  - by pradeepchhetri

  I have the following setup: I have configured high availability between two load balancers (HAProxy) so that if HAProxy1 get down, the floating IP gets transferred to the other load balancer HAProxy2, hence all the clients will get the response from HAProxy2, which at the back-end is doing LB among the sme two webserver. This is for removing the single point of failure in case of only one HAProxy. Whenever I stops the hearbeat in HAProxy1, the floating IP goes to HAProxy2. But I want to configure such that whenever the process haproxy goes down, the floating IP should get assigned to HAProxy2. Can someone tell me how to implement it ?

  Read the article

• Fortigate 200A firewall CPU high resource usage

  - by user119720

  This morning I'm receiving complaints from several end users that saying their whole department network are slow and have intermittent. Therefore I've checked our firewall to see whether if something goes wrong with the device.From my observation in the FortiGate dashboard status, the CPU resources is very high (99 percent). My first assumption is to clear the log since in the alert log the Fortigate log mention that it is already 90% full.Based on my understanding,the log can be cleared by restarting the firewall. After restarting the firewall the network seems okay again but then after several minutes it went up again.The condition still persist until now. Can someone show me where else I can check to fix this issue? I've really appreciate any help that I can get here.Thanks. Edit: diag sys top command

  Read the article

• Need advice on PC components for high-end games but in limited budget

  - by Md Atif

  I need advise, I want to buy PC components which will be good for gaming as well as be under my budget. First thing I chose is Graphics card : ATI HD 7850 2GB DDR5 then matching things up with this selected following: Processor: AMD 3.5 GHz AM3 FX 8320 8 Core Piledriver Mobo: MSI 990FXA-GD65 RAM : 8GB DDR3 (4x2) Is this setup looks compatible? If making any of above component inferior will have negligible affect on performance/gaming(like buying 970 chip mobo instead of 990) then please let me know so I can save some money :) ? Any other advice?

  Read the article

• SOLR high CPU usage in amazon EC2

  - by user644745

  I installed solr-3.6 in my local windows box and it worked fine. I installed solr-4.0 in amazon ec2 linux large instance and the cpu usage shot upto 100%. It maintained at 80-90% average cpu power. I thought it could be because of 4.0, So I installed 3.6 in EC2 again. But again the CPU usage was 80-90% average. With both the versions, solr works in EC2. dont know why CPU usage is so high. i started the solr server using "sudo nohup java -jar start.jar &" In my local box java 1.7 is installed and in EC2 it is 1.6.0_24. I have mapped solr dir to an EBS volume. /dev/mapper/vg1-solr 8361916 1935928 6342128 24% /home/ec2-user/SOLR/solr/example/solr Is there any known issue ?

  Read the article

• High fan speed after return from suspend (on Ubuntu)

  - by Bolo

  Hi, I've got a HP ProBook 5310m laptop with Ubuntu 10.04 (32 bit). When I return from suspend, the fan speed is usually very high: FDTZ sensor reports "90 °C". Yes, the units are wrong, since FDTZ does not report temperature, but fan speed – that's probably just a small bug in reporting. Interestingly, when I plug or unplug the power cable for a moment, the fan speed returns back to normal. My questions: Where can I report this problem? Is it about ACPI support in the kernel? What is the address of the relevant bug tracker? As a workaround for now, how can I programmatically trigger a behavior equivalent to (un)plugging the power cable. More generally, how can I force ACPI to recalculate fan speed? Ideally, I'm looking for something like echo foo > /proc/bar. Thanks in advance!

  Read the article

• Very High Network out in ec2 instance

  - by Jatin

  I launched an ubuntu-14.04-64bit instance in Amazon EC2 two days back. And I started Tomcat 7.0.54 in that instance and deployed my application war files. It has no other software installed other than tomcat and the default ones. In the past 2 days, its shows 858 GB of Data Transfer(Network Out) from that instance. I have attached a graph of Amazon CloudWatch Metric "Network Out" My application does not do any data download/upload. Its a Java Spring application and the front end is in HTML&Javascript. My application traffic was very low (less than 20 hits) in those 2 days. Is there a way to find out why these data transfers happened and also to find what data has been transferred. If you can see in graph, network out was 20gb per minute. Some more info: Network in was negligible CPU Utilization was very high Everything else was low

  Read the article

• Resilient Linux Mail Server Setup

  - by Coops

  How would people design a resilient mail server setup with Linux? On an application level what the system needs to provide is both an incoming and outgoing mail service (i.e. SMTP & IMAP), along with filtering and archive storage (the archive part isn't critical yet, so we'll look at this later probably). What is required on top of this is a resilient system, i.e. one which will handle individual server failures without interrupting service. As such I would term this a High Availability mail system. This is in contrast to a High Performance mail setup, as in our case the volume of mail being handled isn't the important factor, it's simply that it stays online. Having not approached this problem before, the first thing I thought of was a clustered file system (gfs/gluster/etc), combined with heartbeat to failover a floating IP to another box in the case of a server failure. Combined with postfix & dovecot does this sound feasible to people?

  Read the article

• When to use Nginx PHP Fast CGI with a TCP socket instead of a UNIX socket?

  - by user64204

  I've followed this guide to setup PHP in FastCGI mode with Nginx. This guide describes 2 ways of doing it: TCP socket and UNIX socket. I've ran some Apache Benchmark on my locale machine and here are the results: Below tests ran multiple times to get better average statistics: $ ab -c 200 -n 100000 http://.... APACHE: 1800 req/sec NGINX (TCP socket): 2500 req/sec NGINX (UNIX socket): 15000 req/sec As far as I understand, there is overhead with using a TCP socket rather than a UNIX socket, hence the better performance with the latter. However I was not expecting such a performance difference given that the TCP socket is on the localhost, and therefore would like to ask the following question: Q: Given the huge performance gain with using a UNIX socket, what are the configuration scenarios where it would make sense to use a TCP socket instead?

  Read the article

• General High-Level Assessment

  - by tcarper

  Guys and Gals, I've been tasked with a doozy of an assignment. The objective is something akin to "laying of hands" on several database servers which work in concert to provide data to various Web, Client-Server and Tablet-Sync'd distributed Client-Server programs. More specifically, I've been asked to come up with a "Maintenance Plan" which includes recommendations for future work to improve these machines' performance/reliability/security/etc. Might there be some good articles on teh interwebs ya'll could point me towards which would give me some good basis to start? Articles describing "These are the top 4 overarching categories and this is how you should proceed when drilling down on each of them" sort-of-thing would be fabulous. The Databases are all SQL 2005, however the compatibility level is 80 and they were originally created with ERwin based on SQL 6.5. The OSs are all Windows Server 2003. Thanks all! Tim

  Read the article

• COM+ automatic collection of a process dump file and process termination at high call time

  - by immi

  hI, I want to configure my machine for automatic collection of a process dump file and process termination as mentioned in http://support.microsoft.com/kb/910904. But after setting the registry settings according to the KB article, i am not getting the required behaviour. Only a warning is being logged when call time goes high (which is the default behaviour). i am running Windows Server 2003 with SP2. Is there any thing that i am missing? for example restart any COM+ runtime etc. Regards

  Read the article

• Keyboard Slow on a high power machine.

  - by Tim Pierson

  I am having a terrible time with my high powered machine. The keyboard is not displaying the keys as quickly as I type. Sometimes I have to wait up to a minute for the key to display. When I type ahead it sometimes loses characters. I am not sure where to start looking for this problem. It started about a month ago and I still have not figured out why. It does not always do it. But acts up about 2-3 minutes out of ever hour of use or thereabout. How can I look to isolate and find the problem, and solve it?

  Read the article

• Xen Disk Performence Issues

  - by user98651

  I'm currently using Xen PV on CentOS 5 with my domU's as flat files running on a hardware RAID controlled (write cache enabled) formatted with XFS. On the dom0 I can get about 500MB/s in a 2GB dd write from /dev/zero however on the domU's I'm lucky if I get 10MB/s (it is usually around half that). I've tried changing the disk scheduling to NOOP on the domU's, changed some mount parameters and tweaked the performance allocations of both the dom0 (prioritize CPU) and domU's (increase RAM and VCPU allocations). None of these steps have produced any noticeable change in performance. My instinct here is that it is not a hardware problem, due to the solid performance of the dom0. Any ideas on what might be causing this problem? I'm considering moving to LVM based domU's.

  Read the article

• Processor upgrade on a laptop vs. Ram upgrade. Also does ram always matter?

  - by Evan

  I have a Dell Inspiron 14r (N4110) with an Intel Core i3 and 4gb of ram. It runs very smoothly, however gaming on this laptop is very limited. This is mostly because of integrated graphics but i have seen a computer with a Core i5, and very similar specs otherwise, run games that the N4110 cannot. This other computer has integrated graphics and 6gb of ram. I am wondering whether upgrading ram or upgrading the processor make the most difference in performance. Which setup would get better performance, an i5 with 4gb of ram or an i3 with 8 gb of ram? (Both with integrated graphics) Also, is there a certain point at which you have too much ram for the computer to ever possibly use? For instance is there really any difference in performance between 8 gb and 16 gb of ram?

  Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >