Search Results

Search found 2704 results on 109 pages for 'miguel ping'.

Page 82/109 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

• Windows - VBScript - Determine IP address of computer on network

  - by tward

  I have written some VBScripts to automate tasks that I perform on computers over the network. These work great for most tasks however within our network we have problems with the IP address in DNS being correct all the time. This mainly occurs with laptops where we have different IP ranges for machines on the wireless and wired network. For example a machine may boot up wired in the morning and get an IP address: 10.10.10.1 When it switches to wireless it will obtain an address in a different subnet: 10.11.10.1 When you try to connect to that machine it still returns the old IP address (10.10.10.1) even though the computer now has a new one. I have found that I can still connect to that computer's C$ share via \computer name\c$ even though the machine does not ping. Obviously there is some other kind of address resolution going on, my question is how do I harness this to allow my VBScripts connect to WMI? Thanks!

  Read the article

• NLB and Host Header Value

  - by Hafeez

  Background: We are using MOSS 2007 in farm configuration, 2 WFE, 1 Indexer and SQL Server. MS NLB is used for load balancing. Host header value mapped to Virtual IP of Cluster in DNS, is used while creating the web applications in MOSS and all are sharing port 80. Problem: When client tries to access the web application that are configured with host header values. Both of WFEs Hangs for 5 minutes, they stop responding to ping and browser shows 'Page not found'. In the Application Log on the WFE, this error is registered "provider: TCP Provider, error: 0 - The semaphore timeout period has expired". Interestingly, the web application with no host header value and hosted on different ports is working correctly. Any clue to solve this problem will be helpful. Thks. Hafeez

  Read the article

• Ensure connection to a POSPrinter connected via COM

  - by Alexander

  Hi, I need to make sure that the connection to a POS printer is successful before writing data to the database and then printing a receipt. The POSprinter is normally of type BTP 2002NP but may differ. The common thing is that they are all connected via COM-port and NOT usb, so no drivers installed at all on the client. Can I send some kind of "ping" on a COM-port and check if a device is connected and turned on? Any help or suggestions are very much appreciated. Additional information, the application is developed in VB.net and Visual Studio 2008

  Read the article

• Autotesting a network interface

  - by Machado

  Hi All, I'm developing a software component responsible for testing if a network interface has conectivity with the internet. Think of it as the same test the XBOX360 does to inform the user if it's connected with the Live network (just as an example). So far I figured the autotest would run as this: 1) Test the physical network interface (if the cable is conected, has up/downlink, etc...) 2) Test the logical network (has IP address, has DNS, etc...) 3) Connects to the internet (can access google, for example) 4) ??? 5) Profit! (just kidding...) My question relates to step 3: How can I detect, correctly, if my software has connection with the internet ? Is there any fixed IP address to ping ? The problem is that I don't want to rely solely on google.com (or any other well-known address), as those can change in time, and my component will be embbeded on a mobile device, not easy to update. Any suggestions ?

  Read the article

• Android - When to use Service

  - by Chris

  This question is related to my previous question: http://stackoverflow.com/questions/2786720/android-service-ping-url So I have an Android app that on the click of a button, opens up a web page. Now, in the background I want to call another http url for gathering stats. My question is does this have to be a service? I know a service is for background tasks that run for an indefinite period of time, while the user is busy doing something else. In my case, all I really need is to get the URL in the background, not show it to the user, instead show the web page to the user. Can I just not write code to get contents of the http url and fire up the activity that displays the web page? Coz all I want is to get the url in the background and be done with it. Or does this have to be done using the Service class? I am confused. Thanks Chris

  Read the article

• Trying to execute netdom.exe from a ruby script or IRB does nothing

  - by Joraff

  I'm trying to write a script that will rename a computer and join it to a domain, and was planning to call on netdom.exe to do the dirty work. However, trying to run this utility in the script (same results in irb) does absolutely nothing. No output, no execution. I tried with backticks and with the system() method. System() returns false for everything but system("netdom") (which returns true). Backticks never return anything but an empty string. I have verified that netdom runs and works in the environment the script will be running in, and I'm calling other command-line utilities earlier in the script that work (w32tm, getmac, ping). Here's the exact line that gets executed: `netdom renamecomputer %COMPUTERNAME% /NewName:#{newname} /force` FYI, This is windows 7 x64

  Read the article

• Can a Linksys Router be the cause of bad speeds on a 1.5 mbps link.

  - by gramware

  We use a Linksys 5-port router at a smal organization with about 20 employees. We recently acquired a 1.5 mbps fibre link, but sometimes the link goes down and speeds are still low. On enquirey from the ISP, this was part of the response, However there maybe throttling due to the router in place. A Linksys is a low end router and may be unable to carried traffic of up to 1536Kbps. We are in a position to deploy a Cisco 871 router on test for 2 wks to eliminate that possibility. Also kindly advise the destination of the ping results they look to high. How true is that about the router throttling the network and need for a bigger one.

  Read the article

• vmware nat internet connection

  - by ziftech

  Host: Windows Server 2008 / VMWare Server 2 Has Internet connection ip: 172.17.62.1 (NAT adapter) no gateway, no dns Guest: Windows Server 2003 ip: 172.17.62.2 (NAT) gateway 172.17.62.5 (set in VMware network manager for NAT) Host and guest can see each other, but guest have no internet connection (only ping by ip) In what may be the problem? HOST Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f1c1:3518:abb4:c05%24(Preferred) IPv4 Address. . . . . . . . . . . : 172.17.67.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 486559830 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CF-8C-9F-40-61-86-2B-8F-AD DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled GUEST DNS-suffix . . : Description. . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter Physical. . . . . . . . . : 00-0C-29-71-A5-43 DHCP . . . . . . . . . . . : no ip . . . . . . . . . . . . : 172.17.67.2 subnet mask . . . . . . . . . . : 255.255.255.0 gateway . . . . . . . . . . : 172.17.67.5 DNS . . . . . . . . . . . . : 8.8.8.8 All firewalls are down, I can ping hosts, but no telnet connection - telnet google.com 80

  Read the article

• How to set up linux watchdog daemon with Intel 6300esb

  - by ACiD GRiM

  I've been searching for this on Google for sometime now and I have yet to find proper documentation on how to connect the kernel driver for my 6300esb watchdog timer to /dev/watchdog and ensure that watchdog daemon is keeping it alive. I am using RHEL compatible Scientific Linux 6.3 in a KVM virtual machine by the way Below is everything I've tried so far: dmesg|grep 6300 i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 i6300ESB timer: initialized (0xffffc900008b8000). heartbeat=30 sec (nowayout=0) | ll /dev/watchdog crw-rw----. 1 root root 10, 130 Sep 22 22:25 /dev/watchdog | /etc/watchdog.conf #ping = 172.31.14.1 #ping = 172.26.1.255 #interface = eth0 file = /var/log/messages #change = 1407 # Uncomment to enable test. Setting one of these values to '0' disables it. # These values will hopefully never reboot your machine during normal use # (if your machine is really hung, the loadavg will go much higher than 25) max-load-1 = 24 max-load-5 = 18 max-load-15 = 12 # Note that this is the number of pages! # To get the real size, check how large the pagesize is on your machine. #min-memory = 1 #repair-binary = /usr/sbin/repair #test-binary = #test-timeout = watchdog-device = /dev/watchdog # Defaults compiled into the binary #temperature-device = #max-temperature = 120 # Defaults compiled into the binary #admin = root interval = 10 #logtick = 1 # This greatly decreases the chance that watchdog won't be scheduled before # your machine is really loaded realtime = yes priority = 1 # Check if syslogd is still running by enabling the following line #pidfile = /var/run/syslogd.pid Now maybe I'm not testing it correctly, but I would expecting that stopping the watchdog service would cause the /dev/watchdog to time out after 30 seconds and I should see the host reboot, however this does not happen. Also, here is my config for the KVM vm <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit sl6template or other application using the libvirt API. --> <domain type='kvm'> <name>sl6template</name> <uuid>960d0ac2-2e6a-5efa-87a3-6bb779e15b6a</uuid> <memory unit='KiB'>262144</memory> <currentMemory unit='KiB'>262144</currentMemory> <vcpu placement='static'>1</vcpu> <os> <type arch='x86_64' machine='rhel6.3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>Westmere</model> <vendor>Intel</vendor> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='ds'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='vme'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='rdtscp'/> <feature policy='require' name='ht'/> <feature policy='require' name='dca'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='pdpe1gb'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='pclmuldq'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> <feature policy='require' name='aes'/> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/mnt/data/vms/sl6template.img'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:44:57:f6'/> <source bridge='br0.2'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <interface type='bridge'> <mac address='52:54:00:88:0f:42'/> <source bridge='br1'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <watchdog model='i6300esb' action='reset'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </watchdog> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain> Any help is appreciated as the most I've found are patches to kvm and general softdog documentation or IPMI watchdog answers.

  Read the article

• Why packets injected with libpcap are duplicated?

  - by r0u1i

  I'm using sharppcap in order to send packets as part of a monitoring system. Usually it works well but I've encountered the strangest bug on a hosted vista machine and I would like your help. On that virtual vista machine, injected packets are duplicated. That is, if I send a ping request using libpcap, it somehow gets duplicated and I get two requests on the destination machine. The two requests are almost identical byte-wise, and the only difference between them is that the second packet's TTL field is one minus the original packet's value. Using wireshark I can see the packet gets duplicated before it (and its clone) leave the vista machine. The problem is manifested even when using other tools for injecting packets using libpcap (namely PlayCap). Any ideas?

  Read the article

• Using TCP Acks to measure latency to a server?

  - by Ted Graham

  I am trying to measure latency to a server that I don't control. This is in a colocated environment, so the latency is on the order of 500 us (.5 ms). I understand that Cisco gear frequently deprioritizes ICMP traffic, making ping times unreliable. Is there a way for me to tell if this is the case on the gear I am traversing? Can I use TCP acknowledgements to determine the minimum latency to the remote server? To do this, I would somehow need to force the remote server to send a TCP ack immediately on receiving my data.

  Read the article

• How do I use .NET to find an orange ball in an image?

  - by JohnS

  I'm getting images from a C328R camera attached to a small arduino robot. I want the robot to drive towards orange ping-pong balls and pick them up. I'm using the C# code supplied by funkotron76 at http://www.codeproject.com/KB/recipes/C328R.aspx. Is there a library I can use to do this, or do I need to iterate over every pixel in the image looking for orange? If so, what kind of tolerance would I need to compensate for various lighting conditions? I could probably test to figure out these numbers, but I'm hoping someone out there knows the answers.

  Read the article

• How to detect internet connectivity using java program

  - by Sunil Kumar Sahoo

  How to write a java program which will tell me whether I have internet access or not. I donot want to ping or create connection with some external url because if that server will be down then my program will not work. I want reliable way to detect which will tell me 100% guarantee that whether I have internet connection or not irrespective of my Operating System. I want the program for the computers who are directly connected to internet. I have tried with the below program URL url = new URL("http://www.xyz.com/"); URLConnection conn = url.openConnection(); conn.connect(); I want something more appropriate than this program Thanks Sunil Kumar Sahoo

  Read the article

• WCF: what timeout property to use?

  - by Tom234

  I have a piece of code like so NetTcpBinding binding = new NetTcpBinding(SecurityMode.Transport); binding.Security.Message.ClientCredentialType = MessageCredentialType.Windows; binding.CloseTimeout = new TimeSpan(0, 0, 1); binding.OpenTimeout = new TimeSpan(0, 0, 1); binding.SendTimeout = new TimeSpan(0, 0, 1); binding.ReceiveTimeout = new TimeSpan(0, 0, 1); EndpointAddress endPoint = new EndpointAddress(new Uri(clientPath)); DuplexChannelFactory<Iservice> channel = new DuplexChannelFactory<Iservice>(new ClientCallBack(clientName), binding, endPoint); channel.Ping() When the endpoint doesn't exist it still waits 20seconds before throwing an EndpointNotFoundException. The weird thing is that when i changed the SendTimeout the exception message changed from The connection attempt lasted for a time span of 00:00:20 to ....01 but still took 20seconds to throw the exception! How can i change this timeout?

  Read the article

• Check which nodes of Beowulf HPC cluster system are free from PHP app?

  - by Skuja

  I am working on my diploma thesis project. I have access to 32Node Dell poweredge HPC cluster system with Linux(Debian i think) installed on it. My first goal is to create web (PHP) app where logged users could see free and busy nodes, turn them on and off. I am planning to do something like this - write some cron daemon that would run every 30seconds or other interval, and it could run ping utility for each node to find out if it is on or off, then write results to some file. Then from my web app i could read the info. Will it be a good solution? What existing for node management solutions are there?

  Read the article

• Trying to configure HWIC-3G-HSPA

  - by user1174838

  I'm trying to configure a couple of Cisco 1941 routes. The are both identical routers. Each as a HWIC-1T (Smart Serial interface) and a HWIC-3G-HSPA 3G interface. These routers are to be sent to remote sites. We have connectivity to one of the sites but if remote site A gors down we lose connectivity to remote site B. The HWIC-1T is the primary WAN interface using frame relay joining the two remote sites We want the HWIC-3G-HSPA to be usable for direct connectivity from head office to remote site B, and also the HWIC-3G-HSPA is do be used for comms between the remote sites when the frame relay is down (happens quite a bit). I initialy tried to do dynamic routing using EIGRP however in my lab setup of laptop - 1941 - 1941 - laptop, I was unable to get end to end connectivity. I later settled on static routing and have got end to end connectivity but only over frame relay, not the HWIC-3G-HSPA. The sanitized running config for remote site A: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteA ! boot-start-marker boot-end-marker ! ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" ! username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.2.5 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.2 255.255.255.252 encapsulation frame-relay cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.3.0 255.255.255.0 10.1.1.1 permanent ip route 192.168.3.0 255.255.255.0 Cellular0/1/0 210 permanent ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The sanitized running config for remote site B: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteB ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! no ip domain lookup ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.3.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.1 255.255.255.252 encapsulation frame-relay clock rate 2000000 cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi frame-relay intf-type dce ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored ppp ipcp dns request cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.2.0 255.255.255.0 10.1.1.2 permanent ip route 192.168.2.0 255.255.255.0 Cellular0/1/0 210 permanent ! kron occurrence PING in 1 recurring policy-list ICMP ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The last problem I'm having is the 3G interfaces go down after only a few minutes of inactivity. I've tried using kron to ping the local HWIC-3G-HSPA interface (cellular 0/1/0) every minute but that hasn't been successful. Manually pinging the IP assigned (by the telco) to ce0/1/0 does bring the interface up. Any ideas? Thanks

  Read the article

• Trying to establish remote debug with visual studio running inside vmpalyer

  - by Kazoom

  i have this configuration a visual studio running inside virtual machine. the host machine has xp on it and so does the virtual machine. i have to run remote debug on the third machine which is connected to the host machine. i m currently facing this problem i m not able to ping my virtual machine from my host machine, however reverse is possible. how to resolve that? both my machine are on same workgroup (not domain, arent they both same?)

  Read the article

• Setting up a SQL server outside the domain

  - by Ben

  Hi, im very new to this. I've set up an account "SQLBOX" thats on the a network, but not connected to the domain. I have installed an instance of SQL Server 2008 and am trying to connect to it from another machine on the network but am getting "Cannot connect to "SQLBOX"". From the "SQLBOX" i can connect to sqlservers on the domain, but not vice-versa. Any help would be greatly appreciated. Sorry if the description isn't great. EDIT I can ping the box from a machine on the domain

  Read the article

• Basic Login Script using php and mysql inquiry

  - by Matt

  Attempting to write a check for a login script to see if the username is available. Would the best way to write this query be to check if isset(!_POST[]) for both values (nick and pass) then connect to database WHERE the mysql database for the usernick requested return the user id if the usernick exists evaluate if isset($id) to see if the user name is taken and use that to continue to creating an entry Does this logically sound like a method to check for login without using excessive code sorry for not posting the code, it is on another computer and this computer is locked down by my administrator at work... Also, is there another way to evaluate if a value exists in the database? For instance, instead of setting $id to the return value of the mysql database can i just ping the mysql database for the information and have it return a Boolean result so I am not putting out any user information. Thanks, Matt

  Read the article

• ADO.NET: Faster way to check if the database server is accessible?

  - by lotana

  At the moment I am using this code to check if the database is accessible: public bool IsDatabaseOnline(string con) { bool isConnected = false; SQLConnection connect = null; try { connect = new SQLConnection(con); connect.Open(); isConnected = true; } catch (Exception e) { isConnected = false; } finally { if (connect != null) connect.Close(); } return isConnected; } While this code works fine, there is a disadvantage. If the server is not online it spends about 4 full seconds trying to open the connection before deciding that it is not available. Is there a way to test the connection without trying to actually opening it and waiting for the timeout? Something like a database-equivalent of ping?

  Read the article

• Auto SSH and execute script

  - by rohanbk

  I have roughly 12 computers that each have the same script on them. This script merely pings all the other machines, and prints out whether the machine is "reachable" or "unreachable". However, it is inefficient to login to each machine manually using ssh to execute this script. Suppose I'm logged into node 1. Is there any way to for me to login to node 2-12 automatically using SSH, execute the ping script, pipe the results to a file, logout and proceed to the next machine? Some kind of bash shell script? I'm afraid I'm at a loss here since I haven't had experience with shell-scripting before.

  Read the article

• How to make distributed builds using XCode 3.2 on OS X 10.6

  - by Sorin Sbarnea

  After I upgraded using a clean install from OS X 10.5 to 10.6.2 and upgraded the XCode to 3.2.1 I wasn't able to use distributed builds feature anymore. There are several issues that I detected: In most cases Bonjour is not detecting the other computers even they are on the same switch. I added a custom 'set' where I added manually the IP addreses of each computer. Even so I still get status: "unreachable" on them.BTW, ping does work without problems. Both share my computer for shared workgroup builds (distcc) and distribute builds via shared workgroup builds options are checked.

  Read the article

• Elements are listed in a vob but not able to checkout/checkin in CCRC

  - by sunil devan

  Hi, There are 2 windows domains named as OPR & BDC. In OPR domain the CCRC server is hosted, users accessing from BDC domain can able to connect to CCRC and list the vob....and also able to join the project. To perform any checkout/checkin/loading resources it is taking long time and after a day it is in same state.Connectivity is fine to OPR domain from BDC domain ( ping & tracrt is working fine) . Could you please let me know if you have some idea about it? Thanks, Sunil

  Read the article

• Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

  - by GriffJ

  Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

  Read the article

• Android HTTP Connection

  - by Ubersoldat

  Can anybody tell my why this doesn't work in the Android emulator? From the browser I have access and the server is internal. All I can think of is that I'm missing some configuration on my app so it can access the network layer. try { InetAddress server = Inet4Address.getByName("thehost"); //Doesn't work either //or InetAddress server2 = Inet4Address.getByAddress(new String("192.168.1.30").getBytes()); if(server.isReachable(5000)){ Log.d(TAG, "Ping!"); } Socket clientsocket = new Socket(server, 8080); } catch (UnknownHostException e) { Log.e(TAG, "Server Not Found"); } catch (IOException e) { Log.e(TAG, "Couldn't open socket"); } Throws an UnknownHostException Thanks

  Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >