Search Results

Search found 2097 results on 84 pages for 'printer cables'.

Page 82/84 | < Previous Page | 78 79 80 81 82 83 84  | Next Page >

  • 10 tape technology features that make you go hmm.

    - by Karoly Vegh
    A week ago an Oracle/StorageTek Tape Specialist, Christian Vanden Balck, visited Vienna, and agreed to visit customers to do techtalks and update them about the technology boom going around tape. I had the privilege to attend some of his sessions and noted the information and features that took the customers by surprise and made them think. Allow me to share the top 10: I. StorageTek as a brand: StorageTek is one of he strongest names in the Tape field. The brand itself was valued so much by customers that even after Sun Microsystems acquiring StorageTek and the Oracle acquiring Sun the brand lives on with all the Oracle tapelibraries are officially branded StorageTek.See http://www.oracle.com/us/products/servers-storage/storage/tape-storage/overview/index.html II. Disk information density limitations: Disk technology struggles with information density. You haven't seen the disk sizes exploding lately, have you? That's partly because there are physical limits on a disk platter. The size is given, the number of platters is limited, they just can't grow, and are running out of physical area to write to. Now, in a T10000C tape cartridge we have over 1000m long tape. There you go, you have got your physical space and don't need to stuff all that data crammed together. You can write in a reliable pattern, and have space to grow too. III. Oracle has a market share of 62% worldwide in recording head manufacturing. That's right. If you are running LTO drives, with a good chance you rely on StorageTek production. That's two out of three LTO recording heads produced worldwide.  IV. You can store 1 Exabyte data in a single tape library. Yes, an Exabyte. That is 1000 Petabytes. Or, a million Terabytes. A thousand million GigaBytes. You can store that in a stacked StorageTek SL8500 tapelibrary. In one SL8500 you can put 10.000 T10000C cartridges, that store 10TB data (compressed). You can stack 10 of these SL8500s together. Boom. 1000.000 TB.(n.b.: stacking means interconnecting the libraries. Yes, cartridges are moved between the stacked libraries automatically.)  V. EMC: 'Tape doesn't suck after all. We moved on.': Do you remember the infamous 'Tape sucks, move on' Datadomain slogan? Of course they had to put it that way, having only had disk products. But here's a fun fact: on the EMCWorld 2012 there was a major presence of a Tape-tech company - EMC, in a sudden burst of sanity is embracing tape again. VI. The miraculous T10000C: Oracle StorageTek has developed an enterprise-grade tapedrive and cartridge, the T10000C. With awesome numbers: The Cartridge: Native 5TB capacity, 10TB with compression Over a kilometer long tape within the cartridge. And it's locked when unmounted, no rattling of your data.  Replaced the metalparticles datalayer with BaFe (bariumferrite) - metalparticles lose around 7% of magnetism within 30 days. BaFe does not. Yes we employ solid-state physicists doing R&D on demagnetisation in our labs. Can be partitioned, storage tiering within the cartridge!  The Drive: 2GB Cache Encryption implemented in HW - no performance hit 252 MB/s native sustained data rate, beats disk technology by far. Not to mention peak throughput.  Leading the tape while never touching the data side of it, protecting your data physically too Data integritiy checking (CRC recalculation) on tape within the drive without having to read it back to the server reordering data from tape-order, delivering it back in application-order  writing 32 tracks at once, reading them back for CRC check at once VII. You only use 20% of your data on a regular basis. The rest 80% is just lying around for years. On continuously spinning disks. Doubly consuming energy (power+cooling), blocking diskstorage capacity. There is a solution called SAM (Storage Archive Manager) that provides you a filesystem unifying disk and tape, moving data on-demand and for clients transparently between the different storage tiers. You can share these filesystems with NFS or CIFS for clients, and enjoy the low TCO of tape. Tapes don't spin. They sit quietly in their slots, storing 10TB data, using no energy, producing no heat, automounted when a client accesses their data.See: http://www.oracle.com/us/products/servers-storage/storage/storage-software/storage-archive-manager/overview/index.html VIII. HW supported for three decades: Did you know that the original PowderHorn library was released in '87 and has been only discontinued in 2010? That is over two decades of supported operation. Tape libraries are - just like the data carrying on tapecartridges - built for longevity. Oh, and the T10000C cartridge has 30-year archival life for long-term retention.  IX. Tape is easy to manage: Have you heard of Tape Storage Analytics? It is a central graphical tool to summarize, monitor, analyze dataflow, health and performance of drives and libraries, see: http://www.oracle.com/us/products/servers-storage/storage/tape-storage/tape-analytics/overview/index.html X. The next generation: The T10000B drives were able to reuse the T10000A cartridges and write on them even more data. On the same cartridges. We call this investment protection, and this is very important for Oracle for the future too. We usually support two generations of cartridges together. The current drive is a T10000C. (...I know I promised to enlist 10, but I got still two more I really want to mention. Allow me to work around the problem: ) X++. The TallBots, the robots moving around the cartridges in the StorageTek library from tapeslots to the drives are cableless. Cables, belts, chains running to moving parts in a library cause maintenance downtimes. So StorageTek eliminated them. The TallBots get power, commands, even firmwareupgrades through the rails they are running on. Also, the TallBots don't just hook'n'pull the tapes out of their slots, they actually grip'n'lift them out. No friction, no scratches, no zillion little plastic particles floating around in the library, in the drives, on your data. (X++)++: Tape beats SSDs and Disks. In terms of throughput (252 MB/s), in terms of TCO: disks cause around 290x more power and cooling, in terms of capacity: 10TB on a single media and soon more.  So... do you need to store large amounts of data? Are you legally bound to archive it for dozens of years? Would you benefit from automatic storage tiering? Have you got large mediachunks to be streamed at times? Have you got power and cooling issues in the growing datacenters? Do you find EMC's 180° turn of tape attitude interesting, but appreciate it at the same time? With all that, you aren't alone. The most data on this planet is stored on tape. Tape is coming. Big time.

    Read the article

  • HTG Explains: Should You Buy Extended Warranties?

    - by Chris Hoffman
    Buy something at an electronics store and you’ll be confronted by a pushy salesperson who insists you need an extended warranty. You’ll also see extended warranties pushed hard when shopping online. But are they worth it? There’s a reason stores push extended warranties so hard. They’re almost always pure profit for the store involved. An electronics store may live on razor-thin product margins and make big profits on extended warranties and overpriced HDMI cables. You’re Already Getting Multiple Warranties First, back up. The product you’re buying already includes a warranty. In fact, you’re probably getting several different types of warranties. Store Return and Exchange: Most electronics stores allow you to return a malfunctioning product within the first 15 or 30 days and they’ll provide you with a new one. The exact period of time will vary from store to store. If you walk out of the store with a defective product and have to swap it for a new one within the first few weeks, this should be easy. Manufacturer Warranty: A device’s manufacturer — whether the device is a laptop, a television, or a graphics card — offers their own warranty period. The manufacturer warranty covers you after the store refuses to take the product back and exchange it. The length of this warranty depends on the type of product. For example, a cheap laptop may only offer a one-year manufacturer warranty, while a more expensive laptop may offer a two-year warranty. Credit Card Warranty Extension: Many credit cards offer free extended warranties on products you buy with that credit card. Credit card companies will often give you an additional year of warranty. For example, if you buy a laptop with a two year warranty and it fails in the third year, you could then contact your credit card company and they’d cover the cost of fixing or replacing it. Check your credit card’s benefits and fine print for more information. Why Extended Warranties Are Bad You’re already getting a fairly long warranty period, especially if you have a credit card that offers you a free extended warranty — these are fairly common. If the product you get is a “lemon” and has a manufacturing error, it will likely fail pretty soon — well within your warranty period. The extended warranty matters after all your other warranties are exhausted. In the case of a laptop with a two-year warranty that you purchase with a credit card giving you a one-year warranty extension, your extended warranty will kick in three years after you purchase the laptop. In that many years, your current laptop will likely feel pretty old and laptops that are as good — or better — will likely be pretty cheap. If it’s a television, better television displays will be available at a lower price point. You’ll either want to upgrade to a newer model or you’ll be able to buy a new, just-as-good product for very cheap. You’ll only have to pay out-of-pocket if your device fails after the normal warranty period — in over two or three years for typical laptops purchased with a decent credit card. Save the money you would have spent on the warranty and put it towards a future upgrade. How Much Do Extended Warranties Cost? Let’s look at an example from a typical pushy retail outlet, Best Buy. We went to Best Buy’s website and found a pretty standard $600 Samsung laptop. This laptop comes with a one-year warranty period. If purchased with a fairly common credit card, you can easily get a two-year warranty period on this laptop without spending an additional penny. (Yes, such credit cards are available with no yearly fees.) During the check-out process, Best Buy tries to sell you a Geek Squad “Accidental Protection Plan.” To get an additional year of Best Buy’s extended warranty, you’d have to pay $324.98 for a “3-Year Accidental Protection Plan”. You’d basically be paying more than half the price of your laptop for an additional year of warranty — remember, the standard warranties would cover you anyway for the first two years. If this laptop did break sometime between two and three years from now, we wouldn’t be surprised if you could purchase a comparable laptop for about $325 anyway. And, if you don’t need to replace it, you’ve saved that money. Best Buy would object that this isn’t a standard extended warranty. It’s a supercharged warranty plan that will also provide coverage if you spill something on your laptop or drop it and break it. You just have to ask yourself a question. What are the odds that you’ll drop your laptop or spill something on it? They’re probably pretty low if you’re a typical human being. Is it worth spending more than half the price of the laptop just in case you’ll make an uncommon mistake? Probably not. There may be occasional exceptions to this — some Apple users swear by Apple’s AppleCare, for example — but you should generally avoid buying these things. There’s a reason stores are so pushy about extended warranties, and it’s not because they want to help protect you. It’s because they’re making lots of profit from these plans, and they’re making so much profit because they’re not a good deal for customers. Image Credit: Philip Taylor on Flickr     

    Read the article

  • AutoIt scripts runs without error but I can't see archive?

    - by Scott
    #include <File.au3> #include <Zip.au3> ; bad file extensions Local $extData="ade|adp|app|asa|ashx|asp|bas|bat|cdx|cer|chm|class|cmd|com|cpl|crt|csh|der|exe|fxp|gadget|hlp|hta|htr|htw|ida|idc|idq|ins|isp|its|jse|ksh|lnk|mad|maf|mag|mam|maq|mar|mas|mat|mau|mav|maw|mda|mdb|mde|mdt|mdw|mdz|msc|msh|msh1|msh1xml|msh2|msh2xml|mshxml|msi|msp|mst|ops|pcd|pif|prf|prg|printer|pst|reg|rem|scf|scr|sct|shb|shs|shtm|shtml|soap|stm|url|vb|vbe|vbs|ws|wsc|wsf|wsh" Local $extensions = StringSplit($extData, "|") ; What is the root directory? $rootDirectory = InputBox("Root Directory", "Please enter the root directory...") archiveDir($rootDirectory) Func archiveDir($dir) $goDirs = True $goFiles = True ; Get all the files under the current dir $allOfDir = _FileListToArray($dir) Local $countDirs = 0 Local $countFiles = 0 $imax = UBound($allOfDir) For $i = 0 to $imax - 1 If StringInStr(FileGetAttrib($dir & "\" & $allOfDir[$i]),"D") Then $countDirs = $countDirs + 1 ElseIf StringInStr(($allOfDir[$i]),".") Then $countFiles = $countFiles + 1 EndIf Next MsgBox(0, "Value of $countDirs in " & $dir, $countDirs) MsgBox(0, "Value of $countFiles in " & $dir, $countFiles) If ($countDirs > 0) Then Local $allDirs[$countDirs] $goDirs = True Else $goDirs = False EndIf If ($countFiles > 0) Then Local $allFiles[$countFiles] $goFiles = True Else $goFiles = False EndIf $dirCount = 0 $fileCount = 0 For $i = 0 to $imax - 1 If (StringInStr(FileGetAttrib($dir & "\" & $allOfDir[$i]),"D")) And ($goDirs == True) Then $allDirs[$dirCount] = $allOfDir[$i] $dirCount = $dirCount + 1 ElseIf (StringInStr(($allOfDir[$i]),".")) And ($goFiles == True) Then $allFiles[$fileCount] = $allOfDir[$i] $fileCount = $fileCount + 1 EndIf Next ; Zip them if need be in current spot using 'ext_zip.zip' as file name, loop through each file ext. If ($goFiles == True) Then $emax = UBound($extensions) $fmax = UBound($allFiles) For $e = 0 to $emax - 1 For $f = 0 to $fmax - 1 $currentExt = getExt($allFiles[$f]) If ($currentExt == $extensions[$e]) Then $zip = _Zip_Create($dir & "\" & $currentExt & "_zip.zip") _Zip_AddFile($zip, $allFiles[$f]) EndIf Next Next EndIf ; Get all dirs under current DirCopy ; For each dir, recursive call from step 2 If ($goDirs == True) Then $dmax = UBound($allDirs) $rootDirectory = $rootDirectory & "\" For $d = 0 to $dmax - 1 archiveDir($rootDirectory & $allDirs[$d]) Next EndIf EndFunc Func getExt($filename) $pos = StringInStr($filename, ".") $retval = StringTrimLeft($filename, $pos + 1) Return $retval EndFunc This should output the .zip archives in the directories it finds the files that it needs to zip but it doesn't. Is there something I have to do after I create and add files to the archive within the code to put this created archive in the directory?

    Read the article

  • AutoIt scripts runs without error but I can't see archive? - UPDATE

    - by Scott
    #include <File.au3> #include <Zip.au3> #include <Array.au3> ; bad file extensions Local $extData="ade|adp|app|asa|ashx|asp|bas|bat|cdx|cer|chm|class|cmd|com|cpl|crt|csh|der|exe|fxp|gadget|hlp|hta|htr|htw|ida|idc|idq|ins|isp|its|jse|ksh|lnk|mad|maf|mag|mam|maq|mar|mas|mat|mau|mav|maw|mda|mdb|mde|mdt|mdw|mdz|msc|msh|msh1|msh1xml|msh2|msh2xml|mshxml|msi|msp|mst|ops|pcd|pif|prf|prg|printer|pst|reg|rem|scf|scr|sct|shb|shs|shtm|shtml|soap|stm|url|vb|vbe|vbs|ws|wsc|wsf|wsh" Local $extensions = StringSplit($extData, "|") ; What is the root directory? $rootDirectory = InputBox("Root Directory", "Please enter the root directory...") archiveDir($rootDirectory) Func archiveDir($dir) $goDirs = True $goFiles = True ; Get all the files under the current dir $allOfDir = _FileListToArray($dir) $tmax = UBound($allOfDir) For $t = 0 to $tmax - 1 Next Local $countDirs = 0 Local $countFiles = 0 $imax = UBound($allOfDir) For $i = 0 to $imax - 1 If StringInStr(FileGetAttrib($dir & "\" & $allOfDir[$i]),"D") Then $countDirs = $countDirs + 1 ElseIf StringInStr(($allOfDir[$i]),".") Then $countFiles = $countFiles + 1 EndIf Next If ($countDirs > 0) Then Local $allDirs[$countDirs] $goDirs = True Else $goDirs = False EndIf If ($countFiles > 0) Then Local $allFiles[$countFiles] $goFiles = True Else $goFiles = False EndIf $dirCount = 0 $fileCount = 0 For $i = 0 to $imax - 1 If (StringInStr(FileGetAttrib($dir & "\" & $allOfDir[$i]),"D")) And ($goDirs == True) Then $allDirs[$dirCount] = $allOfDir[$i] $dirCount = $dirCount + 1 ElseIf (StringInStr(($allOfDir[$i]),".")) And ($goFiles == True) Then $allFiles[$fileCount] = $allOfDir[$i] $fileCount = $fileCount + 1 EndIf Next ; Zip them if need be in current spot using 'ext_zip.zip' as file name, loop through each file ext. If ($goFiles == True) Then $fmax = UBound($allFiles) For $f = 0 to $fmax - 1 $currentExt = getExt($allFiles[$f]) $position = _ArraySearch($extensions, $currentExt) If @error Then MsgBox(0, "Not Found", "Not Found") Else $zip = _Zip_Create($dir & "\" & $currentExt & "_zip.zip") _Zip_AddFile($zip, $dir & "\" & $allFiles[$f]) EndIf Next EndIf ; Get all dirs under current DirCopy ; For each dir, recursive call from step 2 If ($goDirs == True) Then $dmax = UBound($allDirs) $rootDirectory = $rootDirectory & "\" For $d = 0 to $dmax - 1 archiveDir($rootDirectory & $allDirs[$d]) Next EndIf EndFunc Func getExt($filename) $pos = StringInStr($filename, ".") $retval = StringTrimLeft($filename, $pos - 1) Return $retval EndFunc Updated, fixed a lot of bugs. Still not working. Like I said I have a list of 'bad' file extensions, this script should go through a directory of files (and subdirectories), and zip up (in separate zip files for each bad extension), all files WITH those bad extensions in the directories it finds them. What is wrong???

    Read the article

  • print a linear linked list into a table

    - by user1796970
    I am attempting to print some values i have stored into a LLL into a readable table. The data i have stored is the following : DEBBIE STARR F 3 W 1000.00 JOAN JACOBUS F 9 W 925.00 DAVID RENN M 3 H 4.75 ALBERT CAHANA M 3 H 18.75 DOUGLAS SHEER M 5 W 250.00 SHARI BUCHMAN F 9 W 325.00 SARA JONES F 1 H 7.50 RICKY MOFSEN M 6 H 12.50 JEAN BRENNAN F 6 H 5.40 JAMIE MICHAELS F 8 W 150.00 i have stored each firstname, lastname, gender, tenure, payrate, and salary into their own List. And would like to be able to print them out in the same format that they are viewed on the text file i read them in from. i have messed around with a few methods that allow me to traverse and print the Lists, but i end up with ugly output. . . here is my code for the storage of the text file and the format i would like to print out: public class Payroll { private LineWriter lw; private ObjectList output; ListNode input; private ObjectList firstname, lastname, gender, tenure, rate, salary; public Payroll(LineWriter lw) { this.lw = lw; this.firstname = new ObjectList(); this.lastname = new ObjectList(); this.gender = new ObjectList(); this.tenure = new ObjectList(); this.rate = new ObjectList(); this.salary = new ObjectList(); this.output = new ObjectList(); this.input = new ListNode(); } public void readfile() { File file = new File("payfile.txt"); try{ Scanner scanner = new Scanner(file); while(scanner.hasNextLine()) { String line = scanner.nextLine(); Scanner lineScanner = new Scanner(line); lineScanner.useDelimiter("\\s+"); while(lineScanner.hasNext()) { firstname.insert1(lineScanner.next()); lastname.insert1(lineScanner.next()); gender.insert1(lineScanner.next()); tenure.insert1(lineScanner.next()); rate.insert1(lineScanner.next()); salary.insert1(lineScanner.next()); } } }catch(FileNotFoundException e) {e.printStackTrace();} } public void printer(LineWriter lw) { String msg = " FirstName " + " LastName " + " Gender " + " Tenure " + " Pay Rate " + " Salary "; output.insert1(msg); System.out.println(output.getFirst()); System.out.println(" " + firstname.getFirst() + " " + lastname.getFirst() + "\t" + gender.getFirst() + "\t" + tenure.getFirst() + "\t" + rate.getFirst() + "\t" + salary.getFirst()); } }

    Read the article

  • Selecting MediaTray in Java printing

    - by Rocket Surgeon
    I am trying to programmatically select a different media tray using Java Printing API. However, my document always gets printed to the default (TOP) media tray. I checked if the MediaTray attributes are supported using "isAttributeValueSupported()" method on javax.print.PrintService interface and I am getting the result as "true" for each MediaTray I pass. Here is my code: public void print( String printerName, com.company.services.document.transferobject.MediaTray tray, byte[] document) { String methodName = "print: "; logger.sendEvent(CLASS_NAME + methodName + "Start", EventType.INFO, this); if (printerName == null || "none".equals(printerName) || "?".equals(printerName) || "null".equals(printerName)) { logger.sendEvent("Please supply printer name, currently printerName is "+printerName, EventType.INFO, this); return; } DocFlavor flavor = DocFlavor.BYTE_ARRAY.AUTOSENSE; AttributeSet attributeSet = new HashAttributeSet(); attributeSet.add(new PrinterName(printerName, null)); javax.print.PrintService service = getService(printerName); if (service.isAttributeValueSupported(MediaTray.TOP, flavor, null)) { System.out.println("---------->>>>>>>>>Yes TOP" + " : Value : " + MediaTray.TOP.getValue()); } else { System.out.println("---------->>>>>>>>>Nope"); } if (service.isAttributeValueSupported(MediaTray.BOTTOM, flavor, null)) { System.out.println("---------->>>>>>>>>Yes BOTTOM" + " : Value : " + MediaTray.BOTTOM.getValue()); } else { System.out.println("---------->>>>>>>>>Nope"); } if (service.isAttributeValueSupported(MediaTray.MIDDLE, flavor, null)) { System.out.println("---------->>>>>>>>>Yes MIDDLE" + " : Value : " + MediaTray.MIDDLE.getValue()); } else { System.out.println("---------->>>>>>>>>Nope"); } if (service.isAttributeValueSupported(MediaTray.MANUAL, flavor, null)) { System.out.println("---------->>>>>>>>>Yes MANUAL" + " : Value : " + MediaTray.MANUAL.getValue()); } else { System.out.println("---------->>>>>>>>>Nope"); } if (service.isAttributeValueSupported(MediaTray.SIDE, flavor, null)) { System.out.println("---------->>>>>>>>>Yes SIDE" + " : Value : " + MediaTray.SIDE.getValue()); } else { System.out.println("---------->>>>>>>>>Nope"); } DocPrintJob printJob = service.createPrintJob(); try { byte[] textStream = document; PrintRequestAttributeSet pras = new HashPrintRequestAttributeSet(); pras.add(DocumentServiceConstant. DEFAULT_ONE_PRINT_COPY); pras.add(Sides.ONE_SIDED); Media standardTray= toStandardTray(tray); if (null != standardTray) { pras.add(standardTray); } Doc myDoc = new SimpleDoc(textStream, flavor, null); printJob.print(myDoc, pras); logger.sendEvent( " successfully printed ............ ", EventType.INFO, this); } catch (Throwable th) { logger.sendEvent(" Throwable : "+th.getLocalizedMessage(), EventType.INFO, this); ExceptionUtility .determineExceptionForServiceClient(th); } logger.sendEvent(CLASS_NAME + methodName + "END: ", EventType.INFO, this); } Any help will be greatly appreciated!

    Read the article

  • Struts2 form elements UI too rigid

    - by jscoot
    Hello, i found a similar problem like this: http://stackoverflow.com/questions/2314296/struts2-form-elements but no answer is given until now. So here i post my difficulties with a vengeance. I am using Struts2 with version 2.1.6. When I leave the input elements such as <s:textfield>, <s:textarea>, etc. of a <s:form> with the default theme, the elements are rendered as: <tr> <td class="tdLabel"><label for="firstname" class="label">Firstname:</label></td> <td><input type="text" name="firstname" id="firstname"/></td> </tr> <tr> <td class="tdLabel"><label for="lastname" class="label">Lastname:</label></td> <td><input type="text" name="lastname" id="lastname"/></td> </tr> Now if i want to add something, say an html label, between the two elements, the result gets messed up as described in the related question above. Another problem is: for the <s:checkbox> item, it is just not possible to add an extra title. For example, this tag <s:checkbox id="defaultprinter" name="defaultprinter" key="lbl.defaultprinter"/> is rendered as: <tr> <td valign="top" align="right"></td> <td valign="top" align="left"> <input type="checkbox" name="defaultprinter" value="true" checked="checked" id="defaultprinter"/> <label for="defaultprinter" class="checkboxLabel">Default Printer</label> </td> </tr> By only setting the attributes of <s:checkbox>, i can't add any text to the first <td> shown above (here it is empty!). I don't know if the above rigid UI problems can be solved or there is any workarounds somewhere. Thanks in advance.

    Read the article

  • Is there a Silverlight equivalent to "Application.OpenForms"?

    - by lightmeetsdark
    Basically, I'm trying to take information entered by the user on one page and print it out to another page via a "printer friendly" version, or report, of something. I have a MainPage.xaml that is, as the name suggests, my main page, but in a window there is the subpage AdCalculator.xaml where the user enters the information and PrintEstimate.xaml that is navigated to via a button on AdCalculator. I would like to be able to transfer the information entered in the textboxes from AdCalculator and print it out via text blocks in PrintEstimate. So in order to do that I have the following code: Views.AdCalculator AdCalc = new Views.AdCalculator(); string PrintCompanyName = AdCalc.CompanyName; string PrintContactName = AdCalc.txt_CustomerName.Text; string PrintBillingAddress1 = AdCalc.txt_BillingAddress.Text; string PrintBillingAddress2 = AdCalc.txt_BillingAddressLine2.Text; string PrintPhoneNumber = AdCalc.txt_PhoneNumber.Text; string PrintNumOfAds = AdCalc.txt_NumofAds.Text; string PrintRateOfPlay = AdCalc.Cmb_Rate.SelectedValue.ToString(); string PrintNumOfMonths = AdCalc.txt_NumofMonths.Text; string PrintTotalDue = AdCalc.txt_InvoiceSummary_TotalDue.Text; PrintEstimate PrintEstimatePage = new PrintEstimate(); PrintEstimatePage.txt_CompanyName.Text = PrintCompanyName; PrintEstimatePage.txt_CustomerName.Text = PrintContactName; PrintEstimatePage.txt_BillingAddress.Text = PrintBillingAddress1; PrintEstimatePage.txt_BillingAddressLine2.Text = PrintBillingAddress2; PrintEstimatePage.txt_PhoneNumber.Text = PrintPhoneNumber; PrintEstimatePage.txt_InvoiceSummary_NumofAds.Text = PrintNumOfAds; PrintEstimatePage.txt_InvoiceSummary_RateofPlay.Text = PrintRateOfPlay; PrintEstimatePage.txt_InvoiceSummary_NumOfMonths.Text = PrintNumOfMonths; PrintEstimatePage.txt_EstimateTotal.Text = PrintTotalDue; Only problem is, when I instantiate the new AdCalculator page, it clears the values, so nothing is actually retained as far as user-input goes. Following a lead from a colleague, I believe all I need to do is change the line Views.AdCalculator AdCalc = new Views.AdCalculator(); to Views.AdCalculator AdCalc = (AdCalculator)Application.OpenForms["AdCalculator"]; except the "Apllication.OpenForms" doesn't register. I know there are a lot of differences in the way C# code-behind is laid out for silverlight applications, so I didn't know if there was an equivalent that anyone knew about to "Application.OpenForms" that would help solve my issue or if there was any other way to go about getting my task done. Thank you very much!

    Read the article

  • Week in Geek: New Security Flaw Confirmed for Internet Explorer Edition

    - by Asian Angel
    This week we learned how to use a PC to stay entertained while traveling for the holidays, create quality photo prints with free software, share links between any browser and any smartphone, create perfect Christmas photos using How-To Geek’s 10 best how-to photo guides, and had fun decorating Firefox with a collection of Holiday 2010 Personas themes. Photo by Repoort. Random Geek Links Photo by Asian Angel. Critical 0-Day Flaw Affects All Internet Explorer Versions, Microsoft Warns Microsoft has confirmed a zero-day vulnerability affecting all supported versions of Internet Explorer, including IE8, IE7 and IE6. Note: Article contains link to Microsoft Security Advisory detailing two work-arounds until a security update is released. Hackers targeting human rights, indie media groups Hackers are increasingly hitting the Web sites of human rights and independent media groups in an attempt to silence them, says a new study released this week by Harvard University’s Berkman Center for Internet & Society. OpenBSD: audits give no indication of back doors So far, the analyses of OpenBSD’s crypto and IPSec code have not provided any indication that the system contains back doors for listening to encrypted VPN connections. But the developers have already found two bugs during their current audits. Sophos: Beware Facebook’s new facial-recognition feature Facebook’s new facial recognition software might result in undesirable photos of users being circulated online, warned a security expert, who urged users to keep abreast with the social network’s privacy settings to prevent the abovementioned scenario from becoming a reality. Microsoft withdraws flawed Outlook update Microsoft has withdrawn update KB2412171 for Outlook 2007, released last Patch Tuesday, after a number of user complaints. Skype: Millions still without service Skype was still working to right itself going into the holiday weekend from a major outage that began this past Wednesday. Mozilla improves sync setup and WebGL in Firefox 4 beta 8 Firefox 4.0 beta 8 brings better support for WebGL and introduces an improved setup process for Firefox Sync that simplifies the steps for configuring the synchronization service across multiple devices. Chrome OS the litmus test for cloud The success or failure of Google’s browser-oriented Chrome OS will be the litmus test to decide if the cloud is capable of addressing user needs for content and services, according to a new Ovum report released Monday. FCC Net neutrality rules reach mobile apps The Federal Communications Commission (FCC) finally released its long-expected regulations on Thursday and the related explanations total a whopping 194 pages. One new item that was not previously disclosed: mobile wireless providers can’t block “applications that compete with the provider’s” own voice or video telephony services. KDE and the Document Foundation join Open Invention Network The KDE e.V. and the Document Foundation (TDF) have both joined the Open Invention Network (OIN) as licensees, expanding the organization’s roster of supporters. Report: SEC looks into Hurd’s ousting from HP The scandal surrounding Mark Hurd’s departure from the world’s largest technology company in August has officially drawn attention from the U.S. Securities and Exchange Commission. Report: Google requests delay of new Google TVs Google TV is apparently encountering a bit of static that has resulted in a programming change. Geek Video of the Week This week we have a double dose of geeky video goodness for you with the original Mac vs PC video and the trailer for the sequel. Photo courtesy of Peacer. Mac vs PC Photo courtesy of Peacer. Mac vs PC 2 Trailer Random TinyHacker Links Awesome Tools To Extract Audio From Video Here’s a list of really useful, and free tools to rip audio from videos. Getting Your iPhone Out of Recovery Mode Is your iPhone stuck in recovery mode? This tutorial will help you get it out of that state. Google Shared Spaces Quickly create a shared space and collaborate with friends online. McAfee Internet Security 2011 – Upgrade not worthy of a version change McAfee has released their 2011 version of security products. And as this review details, the upgrades are minimal when compared to their 2010 products. For more information, check out the review. 200 Countries Plotted Hans Rosling’s famous lectures combine enormous quantities of public data with a sport’s commentator’s style to reveal the story of the world’s past, present and future development. Now he explores stats in a way he has never done before – using augmented reality animation. Super User Questions Enjoy looking through this week’s batch of popular questions and answers from Super User. How to restore windows 7 to a known working state every time it boots? Is there an easy way to mass-transfer all files between two computers? Coffee spilled inside computer, damaged hard drive Computer does not boot after ram upgrade Keyboard not detected when trying to install Ubuntu 10.10 How-To Geek Weekly Article Recap Have you had a super busy week while preparing for the holiday weekend? Then here is your chance to get caught up on your reading with our five hottest articles for the week. Ask How-To Geek: Rescuing an Infected PC, Installing Bloat-free iTunes, and Taming a Crazy Trackpad How to Use the Avira Rescue CD to Clean Your Infected PC Eight Geektacular Christmas Projects for Your Day Off VirtualBox 4.0 Rocks Extensions and a Simplified GUI Ask the Readers: How Many Monitors Do You Use with Your Computer? One Year Ago on How-To Geek Here are more great articles from one year ago for you to read and enjoy during the holiday break. Enjoy Distraction-Free Writing with WriteMonkey Shutter is a State of Art Screenshot Tool for Ubuntu Get Hex & RGB Color Codes the Easy Way Find User Scripts for Your Favorite Websites the Easy Way Access Your Unsorted Bookmarks the Easy Way (Firefox) The Geek Note That “wraps” things up for this week and we hope that everyone enjoys the rest of their holiday break! Found a great tip during the break? Then be sure to send it in to us at [email protected]. Photo by ArSiSa7. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Simon’s Cat Explores the Christmas Tree! [Video] The Outdoor Lights Scene from National Lampoon’s Christmas Vacation [Video] The Famous Home Alone Pizza Delivery Scene [Classic Video] Chronicles of Narnia: The Voyage of the Dawn Treader Theme for Windows 7 Cardinal and Rabbit Sharing a Tree on a Cold Winter Morning Wallpaper An Alternate Star Wars Christmas Special [Video]

    Read the article

  • Week in Geek: FBI Back Door in OpenBSD Edition

    - by Asian Angel
    This week we learned how to migrate bookmarks from Delicious to Diigo, fix annoying arrows, play old-school DOS games, schedule smart computer shutdowns, use breaks in Microsoft Word to better format documents, check the condition of hard-disks using Linux disk utilities, & what the Linux fstab is and how it works. Photo by Jameson42. Random Geek Links Another week with extra news link goodness to help keep you up to date. Photo by justmakeit. Report of FBI back door roils OpenBSD community Allegations that the FBI surreptitiously placed a back door into the OpenBSD operating system have alarmed the computer security community, prompting calls for an audit of the source code and claims that the charges must be a hoax. Fortinet: Job outlook improving for cybercrooks In an ironic twist in the job market, more positions will open up for developers who can write customized malware packers, people who can break CAPTCHA codes, and distributors who can spread malicious code, according to Fortinet. Enisa: Malware for smartphones is a ’serious risk’ Businesses and consumers are at risk of data breaches through smartphone use, according to the European Network and Information Security Agency. The trick with the f: Google and Microsoft web sites distribute malware Last week, Google’s DoubleClick advertising platform and Microsoft’s rad.msn.com online ad network briefly distributed malware to other web sites in the form of advertising banners. New scam tactic: Fake disk defraggers It would appear that scammers are trying out new programs to see which might best confuse potential victims and evade detection by legitimate antivirus software. Microsoft closes IE and Stuxnet holes As previously announced, Microsoft has released 17 security updates to close 40 security holes. All four Windows holes so far disclosed in connection with Stuxnet have now been closed. Microsoft Offers H.264 Support to Firefox on Windows via Add-On The new HTML5 Extension for Windows Media Player Firefox Plug-in add-on from Microsoft offers users that are running Firefox on Windows 7 H.264 support for HTML5 video playback. Google proclaims Chrome business-ready Google has announced that Chrome is ready for corporate use. Microsoft Tells Exchange Customers to Think Twice Before Opting for Google Message Continuity This week, Microsoft is telling companies still running Exchange 2010’s precursors that they should carefully consider the implications of embracing Google Message Continuity. Who Google has in mind for its Chrome OS users Steven Vaughan-Nichols explains why he feels that Chrome OS will be ideal for either office-workers or people who need a computer, but do not know the first thing about how to use one safely. Oracle takes office suite to the cloud Oracle has introduced Cloud Office 1.0, a cloud-based version of its office suite, which is aimed at web and mobile users. Mozilla pays premiums for reports of vulnerabilities The Mozilla Foundation has followed Google’s example by expanding its rewards program for reports of vulnerabilities in its Web applications. Who bought those 882 Novell patents? Not just Microsoft The mysterious CPTN Holdings — the organization that bought the 882 Novell patents as part of the terms of the Attachmate acquisition of Novell – has been unmasked (Microsoft, Apple, EMC and Oracle). Appeals court: Feds need warrants for e-mail Police must obtain search warrants before perusing Internet users’ e-mail records, a federal appeals court ruled today in a landmark decision that struck down part of a 1986 law allowing warrantless access. Geek Video of the Week What happens when someone plays a wicked prank by shoveling crazy snow paths that lead to dead ends or turn back on themselves? Watch to find out! Photo by CollegeHumor. Janitor Snow Shoveling Prank Random TinyHacker Links The Oatmeal on Cat vs Internet What lengths will our poor neglected kitty hero have to go to in order to get some attention? Guide On Using JoliCloud With Windows JoliCloud is a nifty operating system that’s made for people who need a light-weight OS that’s mostly cloud based. Check this guide on using it with Windows. Use Cameyo to Easily Create Portable Programs Here’s a nifty tool to make portable apps out of programs in Windows. Check out the guide to do it. Better Family Tech Support A nice new site by Google to help members of family understand how computers work. Track Your Stolen Mobile Phone With F-Secure A useful anti-theft tool for your mobile phone. Super User Questions Another week with great answers to popular questions from Super User. What Chrome password manager fits my requirements? What’s the best way to be able to reimage windows computers? Could you suggest feature-rich disk-based personal backup program for linux (and I’ve seen a few)? What is IPv6 and why should I care? Is there any way to find out what programs are trying to connect to Internet on windows? How-To Geek Weekly Article Recap Here are our hottest articles full of geeky goodness from this past week at HTG. 20 OS X Keyboard Shortcuts You Might Not Know Microsoft Security Essentials 2.0 Kills Viruses Dead. Download It Now. Is Your Desktop Printer More Expensive Than Printing Services? Ask the Readers: Would You Be Willing to Give Windows Up and Use a Different O.S.? The Twelve Days of Geekmas One Year Ago on How-To Geek Enjoy reading through our latest batch of retro-geek goodness from one year ago. Macrium Reflect is a Free and Easy To Use Backup Utility How To Turn a Physical Computer Into A Virtual Machine with Disk2vhd How To Restore Windows 7 from a System Image How To Manage Hard Drive Space Used by Windows 7 Backup and Restore How To Manage Hibernate Mode in Windows 7 The Geek Note That is all we have for you this week, so see you back here again after the holidays! Got a great tip? Send it in to us at [email protected]. Photo by mitjamavsar. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Deathwing the Destroyer – WoW Cataclysm Dragon Wallpaper Drag2Up Lets You Drag and Drop Files to the Web With Ease The Spam Police Parts 1 and 2 – Goodbye Spammers [Videos] Snow Angels Theme for Windows 7 Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser

    Read the article

  • Kernel Panic every time I open a print queue

    - by Gray
    Every time I open any printer queue I get a kernel panic and have to reboot. It's quite frustrating. I've tried removing/adding printers, clearing all caches with Onyx, repairing permissions, all manner of things to no avail. Any tips would be greatly appreciated! ==== CRASH REPORT ==== Interval Since Last Panic Report: 25551 sec Panics Since Last Report: 1 Anonymous UUID: 322E8128-0027-4C2F-9264-6A9D9F1BD13E Thu Aug 27 10:04:23 2009 panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x00233080, type 14=page fault, registers: CR0: 0x8001003b, CR2: 0x00000008, CR3: 0x01157000, CR4: 0x00000660 EAX: 0x00000000, EBX: 0x03f05df0, ECX: 0x2ad007fd, EDX: 0x2ad02d2d CR2: 0x00000008, EBP: 0x2e6abb78, ESI: 0x03f136a0, EDI: 0x03f13640 EFL: 0x00010206, EIP: 0x00233080, CS: 0x00000008, DS: 0x01a70010 Error code: 0x00000000 Backtrace (CPU 0), Frame : Return Address (4 potential args on stack) 0x2e6ab998 : 0x12b4c6 (0x45f91c 0x2e6ab9cc 0x13355c 0x0) 0x2e6ab9e8 : 0x1ab0fe (0x469a98 0x233080 0xe 0x469248) 0x2e6abac8 : 0x1a1713 (0x2e6abae0 0x206 0x2e6abb78 0x233080) 0x2e6abad8 : 0x233080 (0xe 0x3e10048 0x4570010 0x96d0010) 0x2e6abb78 : 0x27866c (0x3f05df0 0x0 0x4ec4 0x3f136a0) 0x2e6abbc8 : 0x249d53 (0x3f13640 0x3e17464 0x55c160 0x3034ed5c) 0x2e6abdc8 : 0x24bb59 (0x3034ed00 0x28 0x9 0x0) 0x2e6abde8 : 0x270186 (0x2e6abe70 0x2e6abe44 0x8 0x0) 0x2e6abe68 : 0x22ca5f (0x3034ed00 0x3034ed00 0x2e6abea8 0xffffffff) 0x2e6abea8 : 0x21b36e (0x1e 0x3034ed00 0x246 0x0) 0x2e6abec8 : 0x217591 (0x3f65c04 0x1e 0x3034ed00 0x3ef2c2) 0x2e6abef8 : 0x217cea (0x530d64 0x4037808 0x3034ed40 0x2e6abf4c) 0x2e6abf68 : 0x217f1b (0x3f65c04 0x3034ed00 0x0 0x530de8) 0x2e6abfc8 : 0x1a14fc (0x530dc0 0x0 0x1a40b5 0x3dd95d0) Backtrace terminated-invalid frame pointer 0 BSD process name corresponding to current thread: kernel_task Mac OS version: 9L31a Kernel version: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 System model name: MacBook4,1 (Mac-F22788A9) System uptime in nanoseconds: 30555146093771 unloaded kexts: com.apple.iokit.IOUSBMassStorageClass 2.0.8 - last unloaded 26709525128459 loaded kexts: com.vmware.kext.vmnet 2.0.5 com.vmware.kext.vmioplug 2.0.5 com.vmware.kext.vmci 2.0.5 com.vmware.kext.vmx86 2.0.5 com.apple.driver.iTunesPhoneDriver 1.0 - last loaded 981750246502 com.apple.iokit.IOUSBMassStorageClass 2.0.8 com.apple.filesystems.msdosfs 1.5.5 com.apple.iokit.IOBluetoothSerialManager 2.1.8f2 com.apple.filesystems.autofs 2.0.2 com.apple.driver.AppleHWSensor 1.9d0 com.apple.driver.AppleHDA 1.7.1a2 com.apple.driver.AppleUpstreamUserClient 2.7.5 com.apple.Dont_Steal_Mac_OS_X 6.0.3 com.apple.iokit.CHUDUtils 201 com.apple.iokit.CHUDProf 211 com.apple.driver.AppleIntelGMAX3100 5.4.8 com.apple.driver.AppleIntelGMAX3100FB 5.4.8 com.apple.driver.AppleHDAController 1.7.1a2 com.apple.iokit.IOFireWireIP 1.7.7 com.apple.driver.AppleIRController 113 com.apple.driver.AudioIPCDriver 1.0.6 com.apple.driver.ACPI_SMC_PlatformPlugin 3.4.0a17 com.apple.driver.AppleLPC 1.3.1 com.apple.driver.AppleBacklight 1.6.0 com.apple.driver.SMCMotionSensor 2.1.1d2 com.apple.driver.AppleUSBTrackpad 1.7.4f1 com.apple.driver.AppleUSBTCKeyEventDriver 1.7.4f1 com.apple.driver.AppleUSBTCKeyboard 1.7.4f1 com.apple.driver.CSRUSBBluetoothHCIController 2.1.8f2 com.apple.driver.AppleUSBMergeNub 3.4.6 com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1 com.apple.iokit.SCSITaskUserClient 2.1.1 com.apple.driver.XsanFilter 2.7.91 com.apple.iokit.IOATAPIProtocolTransport 1.5.3 com.apple.iokit.IOAHCIBlockStorage 1.2.2 com.apple.driver.AppleUSBHub 3.4.9 com.apple.iokit.IOUSBUserClient 3.4.9 com.apple.driver.AppleAHCIPort 1.7.0 com.apple.driver.AppleIntelPIIXATA 2.0.1 com.apple.driver.AppleFWOHCI 3.9.7 com.apple.driver.AppleUSBEHCI 3.4.6 com.apple.driver.AppleEFINVRAM 1.2.0 com.apple.iokit.AppleYukon2 3.1.13b2 com.apple.driver.AirPortBrcm43xx 366.91.21 com.apple.driver.AppleUSBUHCI 3.3.5 com.apple.driver.AppleSmartBatteryManager 158.10.5 com.apple.driver.AppleRTC 1.2.3 com.apple.driver.AppleHPET 1.4 com.apple.driver.AppleACPIPCI 1.2.5 com.apple.driver.AppleACPIButtons 1.2.5 com.apple.driver.AppleSMBIOS 1.4 com.apple.driver.AppleACPIEC 1.2.5 com.apple.driver.AppleAPIC 1.4 com.apple.security.seatbelt 107.12 com.apple.nke.applicationfirewall 1.6.77 com.apple.security.TMSafetyNet 3 com.apple.driver.AppleIntelCPUPowerManagement 76.2.0 com.apple.driver.DiskImages 199 com.apple.BootCache 30.4 com.apple.iokit.IOSerialFamily 9.4 com.apple.driver.DspFuncLib 1.7.1a2 com.apple.iokit.CHUDKernLib 201 com.apple.iokit.IOHDAFamily 1.7.1a2 com.apple.iokit.IOAudioFamily 1.6.9fc5 com.apple.kext.OSvKernDSPLib 1.1 com.apple.driver.IOPlatformPluginFamily 3.4.0a17 com.apple.iokit.IONDRVSupport 1.7.3 com.apple.iokit.IOGraphicsFamily 1.7.3 com.apple.driver.AppleSMC 2.3.1d1 com.apple.iokit.IOUSBHIDDriver 3.4.6 com.apple.driver.AppleUSBBluetoothHCIController 2.1.8f2 com.apple.iokit.IOBluetoothFamily 2.1.8f2 com.apple.driver.AppleUSBComposite 3.2.0 com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1 com.apple.iokit.IOBDStorageFamily 1.5 com.apple.iokit.IODVDStorageFamily 1.5 com.apple.iokit.IOCDStorageFamily 1.5 com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1 com.apple.iokit.IOAHCIFamily 1.5.0 com.apple.iokit.IOATAFamily 2.0.1 com.apple.iokit.IOFireWireFamily 3.4.9 com.apple.iokit.IO80211Family 216.1 com.apple.iokit.IONetworkingFamily 1.6.1 com.apple.iokit.IOUSBFamily 3.4.9 com.apple.driver.AppleEFIRuntime 1.2.0 com.apple.iokit.IOSMBusFamily 1.1 com.apple.iokit.IOStorageFamily 1.5.6 com.apple.iokit.IOHIDFamily 1.5.5 com.apple.driver.AppleACPIPlatform 1.2.5 com.apple.iokit.IOACPIFamily 1.2.0 com.apple.iokit.IOPCIFamily 2.6 Macbook Black Mac OS X (10.5.8)

    Read the article

  • Need help diagnosing network performance issues

    - by tokes
    I am currently working in a developing country as a system analyst for a government department. My area of expertise is software projects, but I've come across a few issues with the network setup in my office. (Unfortunately, being a developing country, there's not a lot of professional help available for this sort of thing.) Most recently, I am trying to diagnose a problem with slowness on the network. Our office is connected to the internet via an ADSL wireless modem/router (called Router). The modem is connected via ethernet to a switch (called Switch). The modem also acts as a wireless access point (called Wireless1), though because it is in a room at the end of the floor, it's range is limited. There are ethernet ports installed around the office. The cables of these all lead back to the same switch. In closer vicinity to the bulk of the client computers, there is another wireless router that acts as an access point for those clients (called Wireless2). That router is connected via ethernet to a wall port, and therefore to Switch. There is also a Windows server which acts as a DNS server (called DNSBox) which is located in the same room and is connected directly to Switch. ---Internet----------| Router/Wireless1 192.168.10.1 ---------------| |----|=========| DNSBox | |-------------------- 192.168.10.4 --------------------| Switch |---Other clients---- | |-------------------- |----|=========| Wireless2 ------------------| 192.168.10.198 One final thing to mention about the network setup. All clients are configured with manual IP addresses. Their router/gateway is set to the IP address of Router, and their DNS server is set to the IP address of DNSBox (with a secondary IP set to an external IP - that of our ISP's DNS server). Here are the symptoms we are experiencing: Clients connected to Wireless2 AP experience slow and unstable connections to the internet. (Slow here is defined as speeds of ~1KB/s, though ping response times seem to be as normal.) Clients connected via ethernet to Switch also experience the same slowness. Clients connected to Wireless1 AP (i.e. connecting via wireless directly to the ADSL modem) experience normal connections to the internet. Clients connected via ethernet to Router (i.e. connecting via ethernet directly to the ADSL modem) also experience normal connections to the internet. I also tried to gauge the connection performance between two machines on the network via ethernet: A file transfer between two clients who were both directly connected to Switch was the fastest; A file transfer between one client directly connected to Switch, and one client directly connected to Router (which is directly connected to Switch) performed much slower; A file transfer between two clients directly connected to Router also performed slowly. Things I have attempted to diagnose the problem: Restarted Switch -- no change. We tried unplugging ethernet jacks from Switch 4 at a time and testing the internet connection. The thought here was that perhaps a client on the network has contracted a virus, and is possibly spamming the network with traffic? (Not very technical, I know.) Unfortunately we couldn't get any significant increases in performance using this method. There were a couple of times when it seemed to be better, but then the connection speed quickly dropped back to slow/dead pace. I didn't want to unplug all jacks from Switch because I was concerned that users might be affected or that I would re-plug in the jacks incorrectly (should I even be worried about that? a port is a port on a switch, right?) I tried swapping the ethernet cable used to connect Router to Switch -- no change in performance. I tried swapping the port used on Switch for Router -- no change in performance. Anyone got any ideas on what this could be? Should I be mentioning specific brand names/models of the hardware used? Virii outbreaks are common in this country/office -- what could I be doing to figure out if a virus is at fault? If it is a virus, it doesn't seem to be generating a lot of traffic to/from the internet, because a) I can still get a good speed if I am directly connected to Router / Wireless1 and b) our ISP data usage has not risen suspiciously. Thanks for your help! Update #1 Here are the specs of some of the hardware: Switch is an Edimax ES3132RL 32-Port 10/100 Rackmount Switch Router is a D-Link DSL-G604T Update #2 I just tried unplugging everything except a laptop and Router from Switch. Speeds are still slow. I guess that means that Router / Switch are not being flooded? It seems more and more likely that the cause is something to do with the interaction between Router and Switch. However, I still can't find any useful resources on setting the LAN speed for either (and I'm not well-versed in these advanced networking configurations).

    Read the article

  • Win a set of Infragistics Silverlight Controls with Data Visualization!

    - by mbcrump
    Infragistics recently released their new Silverlight Data Visualization Controls. I saw a couple of samples and had to take a look. I headed over to their website and downloaded the controls. I first noticed the hospital floor-plan demo shown on their site and started thinking of ways that I could use this in my own organization. I emailed them asking if I could give away the Silverlight Data Visualization controls on my site and they said, Yes! They also wanted to throw in the standard Silverlight Line of Business controls. (combined they are worth about $3000 US). I am very thankful they were willing to help the Silverlight community with this giveaway. So some quick rules below: ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of Infragistics Silverlight Controls with Data Visualization ($3000 Value) Random winner will be announced on January 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) For extra entries simply: Retweet a link to this page using the following URL [ http://mcrump.me/iscfree ]. It does not matter what the tweet says, just as long as the URL is the same. Unlimited tweets, but please don’t go crazy! This URL will allow me to track the users that Tweet this page. Don’t forget to visit Infragistics because they made this possible. ---------------------------------------------------------------------------------------------------------------------------------------------------------- Before we get started with the Silverlight Controls, here is a couple of links to bookmark: The Silverlight Line of Business Control page is here. You can also check out the live demos here. The Data Visualization page is here. You can also check out the live demos here. Don’t worry about the Samples/Help Documentation. You can install all of that to your local HDD when you are installing it. I am going to walk you through the Silverlight Controls recently released by Infragistics. Begin by downloading the trial version and running the executable. If you downloaded the Complete bundle then you will have the following options to pick from. I like having help documentation and samples on my local HDD in case I do not have access to the internet and want to code. After it is installed, you may want to take a look at your Toolbox in Visual Studio 2010. Look for NetAdvantage 10.3 Silverlight and you will see that you now have access to all of these controls. At this point, to use the controls it’s as simple as drag/drop onto your Silverlight container. It will create the proper Namespaces for you. I wanted to highlight a few of the controls that I liked the most: Grid – After using the Infragistics grid you will wonder how you ever survived using the grid supplied by Microsoft standard controls.  This grid was designed to get your application up and running very fast. It’s simple to bind, it handles LARGE DataSets, easy to filter and allows endless possibilities of formatting data. The screenshot below is an example of the grid. For a real-time updating demo click here. SpellChecker- If your users are creating emails or performing any other function that requires Spell Checking then this control is great. Check out the screenshots below: In this first screen, I have a word that is not in the dictionary [DotNet]. The Spell Checker finds the word and allows the user to correct it. What is so great about Infragistics controls is that it only takes a few lines of code to have a full-featured Spell Checker in your application. TagCloud – This is a control that I haven’t seen anywhere else. It allows you to create keywords for popular search terms. This is very similar to TagCloud seen all over the internet.  Below is a screenshot that shows “Facebook” being a very popular item in the cloud. You can link these items to a hyperlink if you wanted. Importing/Exporting from Excel – I work with data a majority of the time. We all know the importance of Excel in our organizations, its used a lot. With Infragistics controls it make importing and exporting data from a Grid into Excel a snap. One of the things that I liked most about this control was the option to choose the Excel format (2003 or 2007). I haven’t seen this feature in other controls. Creating/Saving/Extracting/Uploading Zip Files – This is another control that I haven’t seen many others making. It allows you to basically manipulate a zip file in any way you like. You can even create a password on the zip file. Schedule – The Schedule that Infragistics provides resembles Outlook’s calendar. I think that it’s important for a user to see your app for the first time and immediately be able to start using because they are already familiar with the UI. The Schedule control accomplishes that in my opinion. I have just barely scratched the surface with the Infragistics Silverlight Line of Business controls. To check all of them then click here. A quick thing to note is that this giveaway also comes with the following Silverlight Data Visualization Controls. Below is a screenshot that list all of them:   I wanted to highlight 2 of the controls that I liked the most: xamBarcode– The xamBarcode supports the following Symbologies: Below is an example of the barcode generated by Infragistics controls. This is a high resolution barcode that you will not have to wonder if your scanner can read it. As long as you have ink in your printer your barcode will read it. I used a Symbol barcode reader to test this barcode. xamTreemap– I’ve never seen a way of displaying data like this before, but I like it. You can style this anyway that you like of course and it also comes with an Office 2010 Theme. Thanks to Infragistics for providing the controls to one lucky reader. I hope that you enjoyed this post and good luck to those that entered the contest.  Subscribe to my feed

    Read the article

  • Huawei b153 limit of devices

    - by bdecaf
    I set up my home network all through this 3G wifi router. Problem is it only allows 5 devices to connect. That's not much especially if a wifi printer and gaming consoles keep hogging these slots. On the other hand I don't see the point on blocking these devices. They are (should) not doing anything online just intern in my network. The documentation I can find is surpirisingly unhelpful and focuses how to plug the device in a power socket. So what would be my options. Notes: I have already been able to get a shell on the device using ssh. It's running some Busybox. But I fail to find the how and where this limit is enforced/created. Notes 2: Specifically my device is a 3WebCube - unfortunately not specifically marked with the Huawei Model number. Successes so far After enabling ssh in the options I can login: ssh -T [email protected] [email protected]'s password: ------------------------------- -----Welcome to ATP Cli------ ------------------------------- unfortunately because of this -T - the tab key does not work for autocomplete and all inputted commands will be echoed. Also no history with arrow keys. ATP interface this custom interface is not very useful: ATP>help help Welcome to ATP command line tool. If any question, please input "?" at the end of command. ATP>? ? cls debug help save ? exit ATP>save? save? Command failed. ATP>save ? save ? ATP>debug ? debug ? display set trace ? Shell BUT undocumented - I somehow found on a auto translated chinese website - all you need to do is input sh ATP>sh sh BusyBox vv1.9.1 (2011-03-27 11:59:11 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. # builtin commands # help Built-in commands: ------------------- . : alias bg break cd chdir command continue eval exec exit export false fg getopts hash help jobs kill let local pwd read readonly return set shift source times trap true type ulimit umask unalias unset wait shows standard unix structure: # ls / var tmp proc linuxrc init etc bin usr sbin mnt lib html dev in /bin # ls /bin zebra strace ppps ln echo cat wscd startbsp pppc klog ebtables busybox wlancmd sshd ping kill dns brctl web sntp netstat iwpriv dhcps auth usbdiagd sms mount iwcontrol dhcpc atserver upnp sleep mknod iptables date atcmd upg siproxd mkdir ipcheck cp at umount sh mini_upnpd ip console ash test_at rm mic igmpproxy cms telnetd ripd ls ethcmd cmgr swapdev ps log equipcmd cli in /sbin # ls /sbin vconfig reboot insmod ifconfig arp route poweroff init halt using tftp after installing tftp on my desktop I was able to send files with tftp -s -l curcfg.xml 192.168.1.103 and to download onto the huawei with tftp -g -r curcfg.xml 192.168.1.103 I think I'll need that - because I don't see any editor installed. readout stuff (still playing around where I would get interesting info) For confirmation of hardware: # cat /var/log/modem_hardware_name ^HWVER:"WL1B153M001"# # cat /var/log/modem_software_name 1096.11.03.02.107 # cat /var/log/product_name B153

    Read the article

  • Increase samba space on open suse 12.1

    - by Kapil Sharma
    I know linux basics but not an expert. IT guy left the job here and there is some time before new hire. So sorry if question is very basic. We have local testing server based on Open SUSE 12.1, which also act as shared drive between dev/mgmt team here and using Samba for that. Now we are running out of space on samba, even though server's 2*1TB harddisk is nearly 90% free. My question is, what is limiting Samba and how can I increase its limit? We need around at least 500 GB as shared drive but currently its just 25 GB. I don't need step by step answer, just a link to any helpful article would be sufficient. Probably I'm putting wrong keywords in google so not getting any helpful link. EDIT: Output of commands in the first comment. All commands were run as root user df -h (getting error with df -ht) Filesystem Size Used Avail Use% Mounted on rootfs 30G 5.1G 23G 19% / devtmpfs 2.0G 36K 2.0G 1% /dev tmpfs 2.0G 1.1M 2.0G 1% /dev/shm tmpfs 2.0G 676K 2.0G 1% /run /dev/sda2 30G 5.1G 23G 19% / tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup tmpfs 2.0G 676K 2.0G 1% /var/run tmpfs 2.0G 0 2.0G 0% /media tmpfs 2.0G 676K 2.0G 1% /var/lock /dev/sda3 36G 31G 3.3G 91% /home fdisk -l /dev/[hmsv]d* Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2d4a2d49 Device Boot Start End Blocks Id System /dev/sda1 2048 16771071 8384512 82 Linux swap / Solaris /dev/sda2 * 16771072 79681535 31455232 83 Linux /dev/sda3 79681536 156301311 38309888 83 Linux Disk /dev/sda1: 8585 MB, 8585740288 bytes 255 heads, 63 sectors/track, 1043 cylinders, total 16769024 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda1 doesn't contain a valid partition table Disk /dev/sda2: 32.2 GB, 32210157568 bytes 255 heads, 63 sectors/track, 3915 cylinders, total 62910464 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System Disk /dev/sda3: 39.2 GB, 39229325312 bytes 255 heads, 63 sectors/track, 4769 cylinders, total 76619776 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda3 doesn't contain a valid partition table vgs No volume groups found lvs No volume groups found output of vi /etc/samba/smb.conf # smb.conf is the main Samba configuration file. You find a full commented # version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the # samba-doc package is installed. # Date: 2011-11-02 [global] workgroup = WORKGROUP passdb backend = tdbsam printing = cups printcap name = cups printcap cache time = 750 cups options = raw map to guest = Bad User include = /etc/samba/dhcp.conf logon path = \\%L\profiles\.msprofile logon home = \\%L\%U\.9xprofile logon drive = P: usershare allow guests = Yes [homes] comment = Home Directories valid users = %S, %D%w%S browseable = No read only = No inherit acls = Yes [profiles] comment = Network Profiles Service path = %H read only = No store dos attributes = Yes create mask = 0600 directory mask = 0700 [users] comment = All users path = /home read only = No inherit acls = Yes veto files = /aquota.user/groups/shares/ [groups] comment = All groups path = /home/groups read only = No inherit acls = Yes [printers] comment = All Printers path = /var/tmp printable = Yes create mask = 0600 browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/drivers write list = @ntadmin root force group = ntadmin create mask = 0664 directory mask = 0775 [allusers] comment = All Users path = /home/shares/allusers valid users = @users force group = users create mask = 0660 directory mask = 0771 writable = yes

    Read the article

  • What's up with LDoms: Part 1 - Introduction & Basic Concepts

    - by Stefan Hinker
    LDoms - the correct name is Oracle VM Server for SPARC - have been around for quite a while now.  But to my surprise, I get more and more requests to explain how they work or to give advise on how to make good use of them.  This made me think that writing up a few articles discussing the different features would be a good idea.  Now - I don't intend to rewrite the LDoms Admin Guide or to copy and reformat the (hopefully) well known "Beginners Guide to LDoms" by Tony Shoumack from 2007.  Those documents are very recommendable - especially the Beginners Guide, although based on LDoms 1.0, is still a good place to begin with.  However, LDoms have come a long way since then, and I hope to contribute to their adoption by discussing how they work and what features there are today.  In this and the following posts, I will use the term "LDoms" as a common abbreviation for Oracle VM Server for SPARC, just because it's a lot shorter and easier to type (and presumably, read). So, just to get everyone on the same baseline, lets briefly discuss the basic concepts of virtualization with LDoms.  LDoms make use of a hypervisor as a layer of abstraction between real, physical hardware and virtual hardware.  This virtual hardware is then used to create a number of guest systems which each behave very similar to a system running on bare metal:  Each has its own OBP, each will install its own copy of the Solaris OS and each will see a certain amount of CPU, memory, disk and network resources available to it.  Unlike some other type 1 hypervisors running on x86 hardware, the SPARC hypervisor is embedded in the system firmware and makes use both of supporting functions in the sun4v SPARC instruction set as well as the overall CPU architecture to fulfill its function. The CMT architecture of the supporting CPUs (T1 through T4) provide a large number of cores and threads to the OS.  For example, the current T4 CPU has eight cores, each running 8 threads, for a total of 64 threads per socket.  To the OS, this looks like 64 CPUs.  The SPARC hypervisor, when creating guest systems, simply assigns a certain number of these threads exclusively to one guest, thus avoiding the overhead of having to schedule OS threads to CPUs, as do typical x86 hypervisors.  The hypervisor only assigns CPUs and then steps aside.  It is not involved in the actual work being dispatched from the OS to the CPU, all it does is maintain isolation between different guests. Likewise, memory is assigned exclusively to individual guests.  Here,  the hypervisor provides generic mappings between the physical hardware addresses and the guest's views on memory.  Again, the hypervisor is not involved in the actual memory access, it only maintains isolation between guests. During the inital setup of a system with LDoms, you start with one special domain, called the Control Domain.  Initially, this domain owns all the hardware available in the system, including all CPUs, all RAM and all IO resources.  If you'd be running the system un-virtualized, this would be what you'd be working with.  To allow for guests, you first resize this initial domain (also called a primary domain in LDoms speak), assigning it a small amount of CPU and memory.  This frees up most of the available CPU and memory resources for guest domains.  IO is a little more complex, but very straightforward.  When LDoms 1.0 first came out, the only way to provide IO to guest systems was to create virtual disk and network services and attach guests to these services.  In the meantime, several different ways to connect guest domains to IO have been developed, the most recent one being SR-IOV support for network devices released in version 2.2 of Oracle VM Server for SPARC. I will cover these more advanced features in detail later.  For now, lets have a short look at the initial way IO was virtualized in LDoms: For virtualized IO, you create two services, one "Virtual Disk Service" or vds, and one "Virtual Switch" or vswitch.  You can, of course, also create more of these, but that's more advanced than I want to cover in this introduction.  These IO services now connect real, physical IO resources like a disk LUN or a networt port to the virtual devices that are assigned to guest domains.  For disk IO, the normal case would be to connect a physical LUN (or some other storage option that I'll discuss later) to one specific guest.  That guest would be assigned a virtual disk, which would appear to be just like a real LUN to the guest, while the IO is actually routed through the virtual disk service down to the physical device.  For network, the vswitch acts very much like a real, physical ethernet switch - you connect one physical port to it for outside connectivity and define one or more connections per guest, just like you would plug cables between a real switch and a real system. For completeness, there is another service that provides console access to guest domains which mimics the behavior of serial terminal servers. The connections between the virtual devices on the guest's side and the virtual IO services in the primary domain are created by the hypervisor.  It uses so called "Logical Domain Channels" or LDCs to create point-to-point connections between all of these devices and services.  These LDCs work very similar to high speed serial connections and are configured automatically whenever the Control Domain adds or removes virtual IO. To see all this in action, now lets look at a first example.  I will start with a newly installed machine and configure the control domain so that it's ready to create guest systems. In a first step, after we've installed the software, let's start the virtual console service and downsize the primary domain.  root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-c-- UART 512 261632M 0.3% 2d 13h 58m root@sun # ldm add-vconscon port-range=5000-5100 \ primary-console primary root@sun # svcadm enable vntsd root@sun # svcs vntsd STATE STIME FMRI online 9:53:21 svc:/ldoms/vntsd:default root@sun # ldm set-vcpu 16 primary root@sun # ldm set-mau 1 primary root@sun # ldm start-reconf primary root@sun # ldm set-memory 7680m primary root@sun # ldm add-config initial root@sun # shutdown -y -g0 -i6 So what have I done: I've defined a range of ports (5000-5100) for the virtual network terminal service and then started that service.  The vnts will later provide console connections to guest systems, very much like serial NTS's do in the physical world. Next, I assigned 16 vCPUs (on this platform, a T3-4, that's two cores) to the primary domain, freeing the rest up for future guest systems.  I also assigned one MAU to this domain.  A MAU is a crypto unit in the T3 CPU.  These need to be explicitly assigned to domains, just like CPU or memory.  (This is no longer the case with T4 systems, where crypto is always available everywhere.) Before I reassigned the memory, I started what's called a "delayed reconfiguration" session.  That avoids actually doing the change right away, which would take a considerable amount of time in this case.  Instead, I'll need to reboot once I'm all done.  I've assigned 7680MB of RAM to the primary.  That's 8GB less the 512MB which the hypervisor uses for it's own private purposes.  You can, depending on your needs, work with less.  I'll spend a dedicated article on sizing, discussing the pros and cons in detail. Finally, just before the reboot, I saved my work on the ILOM, to make this configuration available after a powercycle of the box.  (It'll always be available after a simple reboot, but the ILOM needs to know the configuration of the hypervisor after a power-cycle, before the primary domain is booted.) Now, lets create a first disk service and a first virtual switch which is connected to the physical network device igb2. We will later use these to connect virtual disks and virtual network ports of our guest systems to real world storage and network. root@sun # ldm add-vds primary-vds root@sun # ldm add-vswitch net-dev=igb2 switch-primary primary You are free to choose whatever names you like for the virtual disk service and the virtual switch.  I strongly recommend that you choose names that make sense to you and describe the function of each service in the context of your implementation.  For the vswitch, for example, you could choose names like "admin-vswitch" or "production-network" etc. This already concludes the configuration of the control domain.  We've freed up considerable amounts of CPU and RAM for guest systems and created the necessary infrastructure - console, vts and vswitch - so that guests systems can actually interact with the outside world.  The system is now ready to create guests, which I'll describe in the next section. For further reading, here are some recommendable links: The LDoms 2.2 Admin Guide The "Beginners Guide to LDoms" The LDoms Information Center on MOS LDoms on OTN

    Read the article

  • How to mount a blu-ray drive?

    - by Stephan Schielke
    Maybe it is for the best to close this question. This has nothing to do with a bluray drive in general anymore. Probably a hardware defect. I will try to test it with a windows system and different cables again... Thx so far. I have a bluray/dvd/cdrom drive with SATA. Ubuntu wont find it under /dev/sd wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg2' rwrw-- : 'HL-DT-ST' 'BDDVDRW CH08LS10' ------------------------------------------------------------------------- cdrecord -scanbus scsibus2: 2,0,0 200) 'HL-DT-ST' 'BDDVDRW CH08LS10' '2.00' Removable CD-ROM fdisk dont even lists it. Ubuntu only automounts blank DVDs, but neither CDROM nor Blurays. I also changed the sata slot, sata cable and the power cable. The drive works with a windows system. This happens when I try to mount: sudo mount -t auto /dev/scd0 /media/bluray mount: you must specify the filesystem type I tried all filesystems there are. I also installed makemkv. It finds the drive but not the disc. Here is my /dev ls -al /dev total 12 drwxr-xr-x 17 root root 4420 2011-11-25 19:36 . drwxr-xr-x 28 root root 4096 2011-11-25 07:12 .. crw------- 1 root root 10, 235 2011-11-25 19:28 autofs -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab.old drwxr-xr-x 2 root root 700 2011-11-25 19:27 block drwxr-xr-x 2 root root 100 2011-11-25 19:27 bsg crw------- 1 root root 10, 234 2011-11-25 19:28 btrfs-control drwxr-xr-x 3 root root 60 2011-11-25 19:27 bus drwxr-xr-x 2 root root 3820 2011-11-25 19:28 char crw------- 1 root root 5, 1 2011-11-25 19:28 console lrwxrwxrwx 1 root root 11 2011-11-25 19:28 core -> /proc/kcore drwxr-xr-x 2 root root 60 2011-11-25 19:28 cpu crw------- 1 root root 10, 60 2011-11-25 19:28 cpu_dma_latency drwxr-xr-x 7 root root 140 2011-11-25 19:27 disk crw------- 1 root root 10, 61 2011-11-25 19:28 ecryptfs crw-rw---- 1 root video 29, 0 2011-11-25 19:28 fb0 lrwxrwxrwx 1 root root 13 2011-11-25 19:28 fd -> /proc/self/fd crw-rw-rw- 1 root root 1, 7 2011-11-25 19:28 full crw-rw-rw- 1 root fuse 10, 229 2011-11-25 19:28 fuse crw------- 1 root root 251, 0 2011-11-25 19:28 hidraw0 crw------- 1 root root 251, 1 2011-11-25 19:28 hidraw1 crw------- 1 root root 10, 228 2011-11-25 19:28 hpet lrwxrwxrwx 1 root root 14 2011-11-25 19:27 .initramfs -> /run/initramfs drwxr-xr-x 4 root root 220 2011-11-25 19:28 input crw------- 1 root root 1, 11 2011-11-25 19:28 kmsg srw-rw-rw- 1 root root 0 2011-11-25 19:28 log brw-rw---- 1 root disk 7, 0 2011-11-25 19:28 loop0 brw-rw---- 1 root disk 7, 1 2011-11-25 19:28 loop1 brw-rw---- 1 root disk 7, 2 2011-11-25 19:28 loop2 brw-rw---- 1 root disk 7, 3 2011-11-25 19:28 loop3 brw-rw---- 1 root disk 7, 4 2011-11-25 19:28 loop4 brw-rw---- 1 root disk 7, 5 2011-11-25 19:28 loop5 brw-rw---- 1 root disk 7, 6 2011-11-25 19:28 loop6 brw-rw---- 1 root disk 7, 7 2011-11-25 19:28 loop7 drwxr-xr-x 2 root root 60 2011-11-25 19:27 mapper crw------- 1 root root 10, 227 2011-11-25 19:28 mcelog crw-r----- 1 root kmem 1, 1 2011-11-25 19:28 mem drwxr-xr-x 2 root root 60 2011-11-25 19:27 net crw------- 1 root root 10, 59 2011-11-25 19:28 network_latency crw------- 1 root root 10, 58 2011-11-25 19:28 network_throughput crw-rw-rw- 1 root root 1, 3 2011-11-25 19:28 null crw-rw-rw- 1 root root 195, 0 2011-11-25 19:28 nvidia0 crw-rw-rw- 1 root root 195, 255 2011-11-25 19:28 nvidiactl crw------- 1 root root 1, 12 2011-11-25 19:28 oldmem crw-r----- 1 root kmem 1, 4 2011-11-25 19:28 port crw------- 1 root root 108, 0 2011-11-25 19:28 ppp crw------- 1 root root 10, 1 2011-11-25 19:28 psaux crw-rw-rw- 1 root tty 5, 2 2011-11-25 20:00 ptmx drwxr-xr-x 2 root root 0 2011-11-25 19:27 pts brw-rw---- 1 root disk 1, 0 2011-11-25 19:28 ram0 brw-rw---- 1 root disk 1, 1 2011-11-25 19:28 ram1 brw-rw---- 1 root disk 1, 10 2011-11-25 19:28 ram10 brw-rw---- 1 root disk 1, 11 2011-11-25 19:28 ram11 brw-rw---- 1 root disk 1, 12 2011-11-25 19:28 ram12 brw-rw---- 1 root disk 1, 13 2011-11-25 19:28 ram13 brw-rw---- 1 root disk 1, 14 2011-11-25 19:28 ram14 brw-rw---- 1 root disk 1, 15 2011-11-25 19:28 ram15 brw-rw---- 1 root disk 1, 2 2011-11-25 19:28 ram2 brw-rw---- 1 root disk 1, 3 2011-11-25 19:28 ram3 brw-rw---- 1 root disk 1, 4 2011-11-25 19:28 ram4 brw-rw---- 1 root disk 1, 5 2011-11-25 19:28 ram5 brw-rw---- 1 root disk 1, 6 2011-11-25 19:28 ram6 brw-rw---- 1 root disk 1, 7 2011-11-25 19:28 ram7 brw-rw---- 1 root disk 1, 8 2011-11-25 19:28 ram8 brw-rw---- 1 root disk 1, 9 2011-11-25 19:28 ram9 crw-rw-rw- 1 root root 1, 8 2011-11-25 19:28 random crw-rw-r--+ 1 root root 10, 62 2011-11-25 19:28 rfkill lrwxrwxrwx 1 root root 4 2011-11-25 19:28 rtc -> rtc0 crw------- 1 root root 254, 0 2011-11-25 19:28 rtc0 lrwxrwxrwx 1 root root 3 2011-11-25 19:38 scd0 -> sr0 brw-rw---- 1 root disk 8, 0 2011-11-25 19:28 sda brw-rw---- 1 root disk 8, 1 2011-11-25 19:28 sda1 brw-rw---- 1 root disk 8, 2 2011-11-25 19:28 sda2 brw-rw---- 1 root disk 8, 3 2011-11-25 19:28 sda3 brw-rw---- 1 root disk 8, 5 2011-11-25 19:28 sda5 brw-rw---- 1 root disk 8, 6 2011-11-25 19:28 sda6 brw-rw---- 1 root disk 8, 16 2011-11-25 19:28 sdb brw-rw---- 1 root disk 8, 17 2011-11-25 19:28 sdb1 crw-rw---- 1 root disk 21, 0 2011-11-25 19:28 sg0 crw-rw---- 1 root disk 21, 1 2011-11-25 19:28 sg1 crw-rw----+ 1 root cdrom 21, 2 2011-11-25 19:28 sg2 lrwxrwxrwx 1 root root 8 2011-11-25 19:28 shm -> /run/shm crw------- 1 root root 10, 231 2011-11-25 19:28 snapshot drwxr-xr-x 4 root root 280 2011-11-25 19:28 snd brw-rw----+ 1 root cdrom 11, 0 2011-11-25 19:38 sr0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stderr -> /proc/self/fd/2 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdin -> /proc/self/fd/0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdout -> /proc/self/fd/1 crw-rw-rw- 1 root tty 5, 0 2011-11-25 19:35 tty crw--w---- 1 root tty 4, 0 2011-11-25 19:28 tty0 crw------- 1 root root 4, 1 2011-11-25 19:28 tty1 crw--w---- 1 root tty 4, 10 2011-11-25 19:28 tty10 crw--w---- 1 root tty 4, 11 2011-11-25 19:28 tty11 crw--w---- 1 root tty 4, 12 2011-11-25 19:28 tty12 crw--w---- 1 root tty 4, 13 2011-11-25 19:28 tty13 crw--w---- 1 root tty 4, 14 2011-11-25 19:28 tty14 crw--w---- 1 root tty 4, 15 2011-11-25 19:28 tty15 crw--w---- 1 root tty 4, 16 2011-11-25 19:28 tty16 crw--w---- 1 root tty 4, 17 2011-11-25 19:28 tty17 crw--w---- 1 root tty 4, 18 2011-11-25 19:28 tty18 crw--w---- 1 root tty 4, 19 2011-11-25 19:28 tty19 crw------- 1 root root 4, 2 2011-11-25 19:28 tty2 crw--w---- 1 root tty 4, 20 2011-11-25 19:28 tty20 crw--w---- 1 root tty 4, 21 2011-11-25 19:28 tty21 crw--w---- 1 root tty 4, 22 2011-11-25 19:28 tty22 crw--w---- 1 root tty 4, 23 2011-11-25 19:28 tty23 crw--w---- 1 root tty 4, 24 2011-11-25 19:28 tty24 crw--w---- 1 root tty 4, 25 2011-11-25 19:28 tty25 crw--w---- 1 root tty 4, 26 2011-11-25 19:28 tty26 crw--w---- 1 root tty 4, 27 2011-11-25 19:28 tty27 crw--w---- 1 root tty 4, 28 2011-11-25 19:28 tty28 crw--w---- 1 root tty 4, 29 2011-11-25 19:28 tty29 crw------- 1 root root 4, 3 2011-11-25 19:28 tty3 crw--w---- 1 root tty 4, 30 2011-11-25 19:28 tty30 crw--w---- 1 root tty 4, 31 2011-11-25 19:28 tty31 crw--w---- 1 root tty 4, 32 2011-11-25 19:28 tty32 crw--w---- 1 root tty 4, 33 2011-11-25 19:28 tty33 crw--w---- 1 root tty 4, 34 2011-11-25 19:28 tty34 crw--w---- 1 root tty 4, 35 2011-11-25 19:28 tty35 crw--w---- 1 root tty 4, 36 2011-11-25 19:28 tty36 crw--w---- 1 root tty 4, 37 2011-11-25 19:28 tty37 crw--w---- 1 root tty 4, 38 2011-11-25 19:28 tty38 crw--w---- 1 root tty 4, 39 2011-11-25 19:28 tty39 crw------- 1 root root 4, 4 2011-11-25 19:28 tty4 crw--w---- 1 root tty 4, 40 2011-11-25 19:28 tty40 crw--w---- 1 root tty 4, 41 2011-11-25 19:28 tty41 crw--w---- 1 root tty 4, 42 2011-11-25 19:28 tty42 crw--w---- 1 root tty 4, 43 2011-11-25 19:28 tty43 crw--w---- 1 root tty 4, 44 2011-11-25 19:28 tty44 crw--w---- 1 root tty 4, 45 2011-11-25 19:28 tty45 crw--w---- 1 root tty 4, 46 2011-11-25 19:28 tty46 crw--w---- 1 root tty 4, 47 2011-11-25 19:28 tty47 crw--w---- 1 root tty 4, 48 2011-11-25 19:28 tty48 crw--w---- 1 root tty 4, 49 2011-11-25 19:28 tty49 crw------- 1 root root 4, 5 2011-11-25 19:28 tty5 crw--w---- 1 root tty 4, 50 2011-11-25 19:28 tty50 crw--w---- 1 root tty 4, 51 2011-11-25 19:28 tty51 crw--w---- 1 root tty 4, 52 2011-11-25 19:28 tty52 crw--w---- 1 root tty 4, 53 2011-11-25 19:28 tty53 crw--w---- 1 root tty 4, 54 2011-11-25 19:28 tty54 crw--w---- 1 root tty 4, 55 2011-11-25 19:28 tty55 crw--w---- 1 root tty 4, 56 2011-11-25 19:28 tty56 crw--w---- 1 root tty 4, 57 2011-11-25 19:28 tty57 crw--w---- 1 root tty 4, 58 2011-11-25 19:28 tty58 crw--w---- 1 root tty 4, 59 2011-11-25 19:28 tty59 crw------- 1 root root 4, 6 2011-11-25 19:28 tty6 crw--w---- 1 root tty 4, 60 2011-11-25 19:28 tty60 crw--w---- 1 root tty 4, 61 2011-11-25 19:28 tty61 crw--w---- 1 root tty 4, 62 2011-11-25 19:28 tty62 crw--w---- 1 root tty 4, 63 2011-11-25 19:28 tty63 crw--w---- 1 root tty 4, 7 2011-11-25 19:28 tty7 crw--w---- 1 root tty 4, 8 2011-11-25 19:28 tty8 crw--w---- 1 root tty 4, 9 2011-11-25 19:28 tty9 crw------- 1 root root 5, 3 2011-11-25 19:28 ttyprintk crw-rw---- 1 root dialout 4, 64 2011-11-25 19:28 ttyS0 crw-rw---- 1 root dialout 4, 65 2011-11-25 19:28 ttyS1 crw-rw---- 1 root dialout 4, 74 2011-11-25 19:28 ttyS10 crw-rw---- 1 root dialout 4, 75 2011-11-25 19:28 ttyS11 crw-rw---- 1 root dialout 4, 76 2011-11-25 19:28 ttyS12 crw-rw---- 1 root dialout 4, 77 2011-11-25 19:28 ttyS13 crw-rw---- 1 root dialout 4, 78 2011-11-25 19:28 ttyS14 crw-rw---- 1 root dialout 4, 79 2011-11-25 19:28 ttyS15 crw-rw---- 1 root dialout 4, 80 2011-11-25 19:28 ttyS16 crw-rw---- 1 root dialout 4, 81 2011-11-25 19:28 ttyS17 crw-rw---- 1 root dialout 4, 82 2011-11-25 19:28 ttyS18 crw-rw---- 1 root dialout 4, 83 2011-11-25 19:28 ttyS19 crw-rw---- 1 root dialout 4, 66 2011-11-25 19:28 ttyS2 crw-rw---- 1 root dialout 4, 84 2011-11-25 19:28 ttyS20 crw-rw---- 1 root dialout 4, 85 2011-11-25 19:28 ttyS21 crw-rw---- 1 root dialout 4, 86 2011-11-25 19:28 ttyS22 crw-rw---- 1 root dialout 4, 87 2011-11-25 19:28 ttyS23 crw-rw---- 1 root dialout 4, 88 2011-11-25 19:28 ttyS24 crw-rw---- 1 root dialout 4, 89 2011-11-25 19:28 ttyS25 crw-rw---- 1 root dialout 4, 90 2011-11-25 19:28 ttyS26 crw-rw---- 1 root dialout 4, 91 2011-11-25 19:28 ttyS27 crw-rw---- 1 root dialout 4, 92 2011-11-25 19:28 ttyS28 crw-rw---- 1 root dialout 4, 93 2011-11-25 19:28 ttyS29 crw-rw---- 1 root dialout 4, 67 2011-11-25 19:28 ttyS3 crw-rw---- 1 root dialout 4, 94 2011-11-25 19:28 ttyS30 crw-rw---- 1 root dialout 4, 95 2011-11-25 19:28 ttyS31 crw-rw---- 1 root dialout 4, 68 2011-11-25 19:28 ttyS4 crw-rw---- 1 root dialout 4, 69 2011-11-25 19:28 ttyS5 crw-rw---- 1 root dialout 4, 70 2011-11-25 19:28 ttyS6 crw-rw---- 1 root dialout 4, 71 2011-11-25 19:28 ttyS7 crw-rw---- 1 root dialout 4, 72 2011-11-25 19:28 ttyS8 crw-rw---- 1 root dialout 4, 73 2011-11-25 19:28 ttyS9 d rwxr-xr-x 3 root root 60 2011-11-25 19:28 .udev crw-r----- 1 root root 10, 223 2011-11-25 19:28 uinput crw-rw-rw- 1 root root 1, 9 2011-11-25 19:28 urandom drwxr-xr-x 2 root root 60 2011-11-25 19:27 usb crw------- 1 root root 252, 0 2011-11-25 19:28 usbmon0 crw------- 1 root root 252, 1 2011-11-25 19:28 usbmon1 crw------- 1 root root 252, 2 2011-11-25 19:28 usbmon2 crw------- 1 root root 252, 3 2011-11-25 19:28 usbmon3 crw------- 1 root root 252, 4 2011-11-25 19:28 usbmon4 crw------- 1 root root 252, 5 2011-11-25 19:28 usbmon5 crw------- 1 root root 252, 6 2011-11-25 19:28 usbmon6 crw------- 1 root root 252, 7 2011-11-25 19:28 usbmon7 crw------- 1 root root 252, 8 2011-11-25 19:28 usbmon8 drwxr-xr-x 4 root root 80 2011-11-25 19:28 v4l crw------- 1 root root 10, 57 2011-11-25 19:28 vboxdrv crw------- 1 root root 10, 56 2011-11-25 19:28 vboxnetctl drwxr-x--- 4 root vboxusers 80 2011-11-25 19:28 vboxusb crw-rw---- 1 root tty 7, 0 2011-11-25 19:28 vcs crw-rw---- 1 root tty 7, 1 2011-11-25 19:28 vcs1 crw-rw---- 1 root tty 7, 2 2011-11-25 19:28 vcs2 crw-rw---- 1 root tty 7, 3 2011-11-25 19:28 vcs3 crw-rw---- 1 root tty 7, 4 2011-11-25 19:28 vcs4 crw-rw---- 1 root tty 7, 5 2011-11-25 19:28 vcs5 crw-rw---- 1 root tty 7, 6 2011-11-25 19:28 vcs6 crw-rw---- 1 root tty 7, 128 2011-11-25 19:28 vcsa crw-rw---- 1 root tty 7, 129 2011-11-25 19:28 vcsa1 crw-rw---- 1 root tty 7, 130 2011-11-25 19:28 vcsa2 crw-rw---- 1 root tty 7, 131 2011-11-25 19:28 vcsa3 crw-rw---- 1 root tty 7, 132 2011-11-25 19:28 vcsa4 crw-rw---- 1 root tty 7, 133 2011-11-25 19:28 vcsa5 crw-rw---- 1 root tty 7, 134 2011-11-25 19:28 vcsa6 crw------- 1 root root 10, 63 2011-11-25 19:28 vga_arbiter crw-rw----+ 1 root video 81, 0 2011-11-25 19:28 video0 crw-rw-rw- 1 root root 1, 5 2011-11-25 19:28 zero sg_scan -i gives me: sudo sg_scan -i /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] ATA ST31000524NS SN12 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg1: scsi0 channel=0 id=1 lun=0 [em] ATA WDC WD15EADS-00S 01.0 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg2: scsi2 channel=0 id=0 lun=0 [em] HL-DT-ST BDDVDRW CH08LS10 2.00 [rmb=1 cmdq=0 pqual=0 pdev=0x5] sg_map gives me: /dev/sg0 /dev/sda /dev/sg1 /dev/sdb /dev/sg2 /dev/scd0 lsscsi -l gives me: [0:0:0:0] disk ATA ST31000524NS SN12 /dev/sda state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [0:0:1:0] disk ATA WDC WD15EADS-00S 01.0 /dev/sdb state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [2:0:0:0] cd/dvd HL-DT-ST BDDVDRW CH08LS10 2.00 /dev/sr0 state=running queue_depth=1 scsi_level=6 type=5 device_blocked=0 timeout=30 my udf mod is: filename: /lib/modules/3.0.0-14-generic/kernel/fs/udf/udf.ko license: GPL description: Universal Disk Format Filesystem author: Ben Fennema srcversion: 6ABDE012374D96B9685B8E5 depends: crc-itu-t vermagic: 3.0.0-14-generic SMP mod_unload modversions Do I need special drivers or mods enabled? Do I need to change some BIOS settings? edit: Somehow I am now able to fire the mount command without any filesystem errors, but now I get: mount: no medium found on /dev/sr0

    Read the article

  • Load-balancing between a Procurve switch and a server

    - by vlad
    Hello I've been searching around the web for this problem i've been having. It's similar in a way to this question: How exactly & specifically does layer 3 LACP destination address hashing work? My setup is as follows: I have a central switch, a Procurve 2510G-24, image version Y.11.16. It's the center of a star topology, there are four switches connected to it via a single gigabit link. Those switches service the users. On the central switch, I have a server with two gigabit interfaces that I want to bond together in order to achieve higher throughput, and two other servers that have single gigabit connections to the switch. The topology looks as follows: sw1 sw2 sw3 sw4 | | | | --------------------- | sw0 | --------------------- || | | srv1 srv2 srv3 The servers were running FreeBSD 8.1. On srv1 I set up a lagg interface using the lacp protocol, and on the switch I set up a trunk for the two ports using lacp as well. The switch showed that the server was a lacp partner, I could ping the server from another computer, and the server could ping other computers. If I unplugged one of the cables, the connection would keep working, so everything looked fine. Until I tested throughput. There was only one link used between srv1 and sw0. All testing was conducted with iperf, and load distribution was checked with systat -ifstat. I was looking to test the load balancing for both receive and send operations, as I want this server to be a file server. There were therefore two scenarios: iperf -s on srv1 and iperf -c on the other servers iperf -s on the other servers and iperf -c on srv1 connected to all the other servers. Every time only one link was used. If one cable was unplugged, the connections would keep going. However, once the cable was plugged back in, the load was not distributed. Each and every server is able to fill the gigabit link. In one-to-one test scenarios, iperf was reporting around 940Mbps. The CPU usage was around 20%, which means that the servers could withstand a doubling of the throughput. srv1 is a dell poweredge sc1425 with onboard intel 82541GI nics (em driver on freebsd). After troubleshooting a previous problem with vlan tagging on top of a lagg interface, it turned out that the em could not support this. So I figured that maybe something else is wrong with the em drivers and / or lagg stack, so I started up backtrack 4r2 on this same server. So srv1 now uses linux kernel 2.6.35.8. I set up a bonding interface bond0. The kernel module was loaded with option mode=4 in order to get lacp. The switch was happy with the link, I could ping to and from the server. I could even put vlans on top of the bonding interface. However, only half the problem was solved: if I used srv1 as a client to the other servers, iperf was reporting around 940Mbps for each connection, and bwm-ng showed, of course, a nice distribution of the load between the two nics; if I run the iperf server on srv1 and tried to connect with the other servers, there was no load balancing. I thought that maybe I was out of luck and the hashes for the two mac addresses of the clients were the same, so I brought in two new servers and tested with the four of them at the same time, and still nothing changed. I tried disabling and reenabling one of the links, and all that happened was the traffic switched from one link to the other and back to the first again. I also tried setting the trunk to "plain trunk mode" on the switch, and experimented with other bonding modes (roundrobin, xor, alb, tlb) but I never saw any traffic distribution. One interesting thing, though: one of the four switches is a Cisco 2950, image version 12.1(22)EA7. It has 48 10/100 ports and 2 gigabit uplinks. I have a server (call it srv4) with a 4 channel trunk connected to it (4x100), FreeBSD 8.0 release. The switch is connected to sw0 via gigabit. If I set up an iperf server on one of the servers connected to sw0 and a client on srv4, ALL 4 links are used, and iperf reports around 330Mbps. systat -ifstat shows all four interfaces are used. The cisco port-channel uses src-mac to balance the load. The HP should use both the source and destination according to the manual, so it should work as well. Could this mean there is some bug in the HP firmware? Am I doing something wrong?

    Read the article

  • Ubuntu 11.10 - Everytime i am trying to connect to my box using SSH, its failing not connecting

    - by YumYumYum
    From any other PC doing SSH to my Ubuntu 11.10,is failing. Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 -- apt-get install openipml openhpi-plugin-ipml

    Read the article

  • Get Information to Your Blog with Microsoft Broadcaster

    - by Matthew Guay
    Do you often have people ask you for advice about technology, or do you write tech-focused blog or newsletter?  Here’s how you can get information to share with your readers about Microsoft technology with Microsoft Broadcaster. Microsoft Broadcaster is a new service from Microsoft to help publishers, bloggers, developers, and other IT professionals find relevant information and resources from Microsoft.  You can use it to help discover things to write about, or simply discover new information about the technology you use.  Broadcaster will also notify you when new resources are available about the topics that interest you.  Let’s look at how you could use this to expand your blog and help your users. Getting Started Head over to the Microsoft Broadcaster site (link below), and click Join to get started. Sign in with your Windows Live ID, or create a new account if you don’t already have one. Near the bottom of the page, add information about your blog, newsletter, or group that you want to share Broadcaster information with.  Click Add when you’re done entering information.  You can enter as many sites or groups as you wish. When you’ve entered all of your information, click the Apply button at the bottom of the page.  Broadcaster will then let you know your information has been submitted, but you’ll need to wait several days to see if you are approved or not. Our application was approved about 2 days after applying, though this may vary.  When you’re approved, you’ll receive an email letting you know.  Return to the Broadcaster website (link below), but this time, click Sign in. Accept the terms of use by clicking I Accept at the bottom of the page. Confirm that your information entered previously is correct, and then click Configure my keywords at the bottom of the page. Now you can pick the topics you want to stay informed about.  Type keywords in the textbox, and it will bring up relevant topics with IntelliSense. Here we’ve added several topics to keep up with. Next select the Microsoft Products you want to keep track of.  If the product you want to keep track of is not listed, make sure to list it in the keywords section as above. Finally, select the types of content you wish to see, including articles, eBooks, webcasts, and more. Finally, when everything’s entered, click Configure My Alerts at the bottom of the page. Broadcaster can automatically email you when new content is found.  If you would like this, click Subscribe.  Otherwise, simply click Access Dashboard to go ahead and find your personalized content. If you choose to receive emails of new content, you’ll have to configure it with Windows Live Alerts.  Click Continue to set this up. Select if you want to receive Messenger alerts, emails, and/or text messages when new content is available.  Click Save when you’re finished. Finally, select how often you want to be notified, and then click Access Dashboard to view the content currently available. Finding Content For Your Blog, Site, or Group Now you can find content specified for your interests from the dashboard.  To access the dashboard in the future, simply go to the Broadcaster site and click Sign In. Here you can see available content, and can search for different topics or customize the topics shown. You’ll see snippets of information from various Microsoft videos, articles, whitepapers, eBooks, and more, depending on your settings.  Click the link at the top of the snippet to view the content, or right-click and copy the link to use in emails or on social networks like Twitter. If you’d like to add this snippet to your website or blog, click the Download content link at the bottom.   Now you can preview what the snippet will look like on your site, and change the width or height to fit your site.  You can view and edit the source code of the snippet from the box at the bottom, and then copy it to use on your site. Copy the code, and paste it in the HTML of a blog post, email, webpage, or anywhere else you wish to share it.  Here we’re pasting it into the HTML editor in Windows Live Writer so we can post it to a blog. After adding a title and opening paragraph, we have a nice blog post that only took a few minutes to put together but should still be useful for our readers.  You can check out the blog post we created at the link below. Readers can click on the links, which will direct them to the content on Microsoft’s websites. Conclusion If you frequently need to find educational and informative content about Microsoft products and services, Broadcaster can be a great service to keep you up to date.  The service worked quite good in our tests, and generally found relevant content to our keywords.  We had difficulty embedding links to eBooks that were listed by Broadcaster, but everything else worked for us.  Now you can always have high quality content to help your customers, coworkers, friends, and more, and you just might find something that will help you, too! Link Microsoft Broadcaster (registration required) Example Post at Techinch.com with Content from Microsoft Broadcaster Similar Articles Productive Geek Tips Create An Electronic Business Card In Outlook 2007Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPAnnouncing the How-To Geek BlogsNew Vista Syntax for Opening Control Panel Items from the Command-lineHow To Create and Publish Blog Posts in Word 2010 & 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Fix Common Inkjet Printer Errors Dual Boot Ubuntu and Windows 7 What is HTML5? Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com

    Read the article

  • Everytime i am trying to connect to my box using SSH, its failing not connecting

    - by YumYumYum
    From any other PC doing SSH to my Ubuntu 11.10,is failing. My network setup: Telenet ISP (Belgium) Fiber cable < RJ45 cable straight to Ubuntu PC Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ nmap 192.168.0.128 Starting Nmap 5.50 ( http://nmap.org ) at 2012-06-08 19:11 CEST Nmap scan report for 192.168.0.128 Host is up (0.00045s latency). All 1000 scanned ports on 192.168.0.128 are closed (842) or filtered (158) Nmap done: 1 IP address (1 host up) scanned in 6.86 seconds ubuntu@ubuntu:~$ netstat -aunt | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 1 192.168.0.128:58616 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:56749 199.7.57.72:80 ESTABLISHED tcp 0 1 192.168.0.128:58614 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:49916 173.194.65.113:443 ESTABLISHED tcp 0 1 192.168.0.128:45699 64.34.119.101:80 SYN_SENT tcp 0 0 192.168.0.128:48404 64.34.119.12:80 ESTABLISHED tcp 0 0 192.168.0.128:54161 67.201.31.70:80 TIME_WAIT $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 $ apt-get install openipml openhpi-plugin-ipml $ openipmish > help redisp_cmd on|off > redisp_cmd on redisp set Final follow up: Step 1: BUG for network card driver r8169 Step 2: get the latest build version http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=4&PFid=4&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true#RTL8110SC(L) Step 3: build / make $ cd /var/tmp/driver $ tar xvfj r8169.tar.bz2 $ make clean modules && make install $ rmmod r8169 $ depmod $ cp src/r8169.ko /lib/modules/3.xxxx/kernel/drivers/net/r8169.ko $ modprobe r8169 $ update-initramfs -u $ init 6 Voila!!

    Read the article

  • Ubuntu 12 crashed and took down network

    - by Leopd
    We recently set up a new Ubuntu 12.04LTS server on our network. It's not fully configured so it's not doing much beyond sshd and a default apache2 install. But this evening it appears to have crashed. It wasn't responding to the network or the keyboard. But the worst part is, it took down the entire network. My knowledge of the network stack below OSI layer 3 is very limited, so the rest confuses me. When this machine was physically connected to the network, no other machine could connect to the outside internet. When things were broken, running arp showed that our gateway's IP address (10.0.1.1) was listed as "invalid." Unplugging the server from the network fixed the problem, and plugging it back in broke it again. So the crashed server was advertising itself as owning the gateway's IP address? There's nothing at all in syslog during the time when it was causing problems. Any ideas about how to figure out what went wrong or what we can do to prevent it from happening again? I'm hesitant to even put the machine back on the network right now. Update ** It crashed again, and I ran tcpdump -penn arp (thanks bahamat!) for several minutes and got this... (timestamps and duplicate lines removed) 00:1e:65:f8:dc:24 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 60: Request who-has 10.0.1.1 tell 10.0.2.191, length 46 00:1e:65:f8:dc:24 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 60: Request who-has 10.0.1.44 tell 10.0.2.191, length 46 60:d8:19:d4:71:d6 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 60: Request who-has 10.0.1.1 tell 10.0.2.125, length 46 d4:9a:20:04:e9:78 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.168.1.1 tell 192.168.1.100, length 28 Update 2 ** When the network is functioning properly, arping -c4 10.0.1.1 returns this: ARPING 10.0.1.1 60 bytes from c0:c1:c0:77:25:8e (10.0.1.1): index=0 time=267.982 usec 60 bytes from c0:c1:c0:77:25:8e (10.0.1.1): index=1 time=422.955 usec 60 bytes from c0:c1:c0:77:25:8e (10.0.1.1): index=2 time=299.215 usec 60 bytes from c0:c1:c0:77:25:8e (10.0.1.1): index=3 time=366.926 usec --- 10.0.1.1 statistics --- 4 packets transmitted, 4 packets received, 0% unanswered (0 extra) When the bad server is plugged in, arping -c4 10.0.1.1 returns: ARPING 10.0.1.1 --- 10.0.1.1 statistics --- 4 packets transmitted, 0 packets received, 100% unanswered (0 extra) Context ** 10.0.x.x is the main subnet. 10.0.1.1 is the main internet gateway 10.0.1.44 is a printer 10.0.2.* devices are all laptops / workstations I have no idea what's using the 192.168.x.x subnet -- your guesses are at least as good as mine. A VM on a workstation? A misconfigured WAP? Somebody re-sharing wifi? A machine that failed to DHCP? The offending ubuntu server's MAC address ends in cd:80 so isn't listed in the dump. It should DHCP to 10.0.3.3 Thanks for any help. This ARP stuff is all voodoo to me. Packets just go to IP addresses, right? ;)

    Read the article

  • Cross-platform distributed fault-tolerant (disconnected operation/local cache) filesystem

    - by Adrian Frühwirth
    We are facing a design "challenge" where we are required to set up a storage solution with the following properties: What we need HA a scalable storage backend offline/disconnected operation on the client to account for network outages cross-platform access client-side access from certainly Windows (probably XP upwards), possibly Linux backend integrates with AD/LDAP (permission management (user/group management, ...)) should work reasonably well over slow WAN-links Another problem is that we don't really know all possible use cases here, if people need to be able to have concurrent access to shared files or if they will only be accessing their own files, so a possible solution needs to account for concurrent access and how conflict management would look in this case from a user's point of view. This two years old blog posts sums up the impression that I have been getting during the last couple of days of research, that there are lots of current übercool projects implementing (non-Windows) clustered petabyte-capable blob-storage solutions but that there is none that supports disconnected operation nicely and natively, but I am hoping that we have missed an obvious solution. What we have tried OpenAFS We figured that we want a distributed network filesystem with a local cache and tested OpenAFS (which, as the only currently "stable" DFS supporting disconnected operation, seemed the way to go) for a week but there are several problems with it: it's a real pain to set up there are no official RHEL/CentOS packages the package of the current stable version 1.6.5.1 from elrepo randomly kernel panics on fresh installs, this is an absolute no-go Windows support (including the required Kerberos packages) is mystical. The current client for the 1.6 branch does not run on Windows 8, the current client for the 1.7 does but it just randomly crashes. After that experience we didn't even bother testing on XP and Windows 7. Suffice to say, we couldn't get it working and the whole setup has been so unstable and complicated to setup that it's just not an option for production. Samba + Unison Since OpenAFS was a complete disaster and no other DFS seems to support disconnected operation we went for a simpler idea that would sync files against a Samba server using Unison. This has the following advantages: Samba integrates with ADs; it's a pain but can be done. Samba solves the problem of remotely accessing the storage from Windows but introduces another SPOF and does not address the actual storage problem. We could probably stick any clustered FS underneath Samba, but that means we need a HA Samba setup on top of that to maintain HA which probably adds a lot of additional complexity. I vaguely remember trying to implement redundancy with Samba before and I could not silently failover between servers. Even when online, you are working with local files which will result in more conflicts than would be necessary if a local cache were only touched when disconnected It's not automatic. We cannot expect users to manually sync their files using the (functional, but not-so-pretty) GTK GUI on a regular basis. I attempted to semi-automate the process using the Windows task scheduler, but you cannot really do it in a satisfactory way. On top of that, the way Unison works makes syncing against Samba a costly operation, so I am afraid that it just doesn't scale very well or even at all. Samba + "Offline Files" After that we became a little desparate and gave Windows "offline files" a chance. We figured that having something that is inbuilt into the OS would reduce administrative efforts, helps blaming someone else when it's not working properly and should just work since people have been using this for years. Right? Wrong. We really wanted it to work, but it just doesn't. 30 minutes of copying files around and unplugging network cables/disabling network interfaces left us with (silent! there is only a tiny notification in Windows explorer in the statusbar, which doesn't even open Sync Center if you click on it!) undeletable files on the server (!) and conflicts that should not even be conflicts. In the end, we had one successful sync of a tiny text file, everything else just exploded horribly. Beyond that, there are other problems: Microsoft admits that "offline files" in Windows XP cannot cope with "large files" and therefore does not cache/sync them at all which would mean those files become unavailable if the connection drop In Windows 7 the feature is only available in the Professional/Ultimate/Enterprise editions. Summary Unless there is another fault-tolerant DFS that supports Windows natively I assume that stacking a HA Samba cluster on top of something like GlusterFS/Lustre/whatnot is the only option, but I hope that I am wrong here. How do other companies allow fault-tolerant network access to redundant storage in a heterogeneous environment with Windows?

    Read the article

  • Win 7 Netbook refuses to ping JetDirect card (all other PCs work)

    - by Luke Puplett
    I have an odd thing occuring here. From a Windows 7 netbook, I cannot ping an HP printer on the network, while all other machines (Win7/Vista) can. And the netbook can also ping everything else on the LAN. Example showing that the netbook can ping 192.168.3.4 but not 3.6. C:\Users\backdoor>ping w7ue1m Pinging w7ue1m.corp.biz.co.uk [192.168.3.4] with 32 bytes of data: Reply from 192.168.3.4: bytes=32 time=7ms TTL=128 Reply from 192.168.3.4: bytes=32 time=4ms TTL=128 Reply from 192.168.3.4: bytes=32 time=2ms TTL=128 Reply from 192.168.3.4: bytes=32 time=2ms TTL=128 Ping statistics for 192.168.3.4: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 2ms, Maximum = 7ms, Average = 3ms C:\Users\backdoor>ping uktnprint1 Pinging uktnprint1.corp.biz.co.uk [192.168.3.6] with 32 bytes of data: Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Ping statistics for 192.168.3.6: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),`enter code here` The IPCONFIG result for the netbook is fine. IPv4 Address. . . . . . . . . . . : 192.168.3.0 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 192.168.1.1 Most unusual network thing I've seen in years. I must reiterate that only this netbook is having trouble pinging/printing. Thanks, Luke ** UPDATE ** Am now on a Vista box, and here's the IPCONFIG: IPv4 Address. . . . . . . . . . . : 192.168.3.3 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 192.168.1.1 Pinging uktnprint1.corp.biz.co.uk [192.168.3.6] with 32 bytes of data: Reply from 192.168.3.6: bytes=32 time=2ms TTL=60 Firewall is off. I'll look into the chance of an IP conflict because it's the only thing I can think of - compare arp caches of each machine. Cheers!

    Read the article

  • Web browsing is fast, but downloads are slow

    - by Ricket
    I work for a company on my university's campus, helping with general IT problems and some web development. But lately there has been a problem that has me and my boss completely stumped. We, plus one contractor, make up the entire IT department, so I'm reaching out to you for help. All around the office, we have wall jacks. These collect in a closet down the hall and all plug into a switch. This switch, along with our individual server jacks, plugs into another switch, and that switch plugs into our firewall hardware. Then the firewall is connected out to our campus network. Our campus internet is, well, very fast. I don't know exactly the terms, tiers, etc., but we have thousands of students and downloads can run as fast as 10 MB/s at night; uploads are sometimes even faster. I think we're practically ISP level. In short, I have a lot of faith that it is not the campus side of things that is causing a problem, combined with other evidence I'll mention in a moment. So our symptoms: web browsing is fast. Web pages, images, etc. load instantly. No problems there. But then when I go to download something, the download starts fast but very quickly (a matter of seconds) drops to nearly 0. Often it will actually drop to 0 and time out. This happens with even very small files, 1 MB or less. It smells to me like a QoS sort of thing. I'm not entirely sure, and I wanted to get your opinions first. My boss is hesitant to touch our firewall, much less let me touch it, and it was set up and is managed by a consultant remotely. These problems don't seem tied to a time of the day. I've tried downloads after 5:00 and still the same thing happens. From my desk, I can turn on my wireless adapter and pick up the campus wireless access point. If I unplug ethernet and connect to it, downloads are fast. This adds to my suspicion that it's limited to our company network. Also, a number of weeks ago the consultant upgraded our firewall firmware. Suddenly everything was very fast. I tested with downloads from Sun and speedtest.net and things were blazing fast, as they should be with our campus internet! It was wonderful, and I figured the slow speeds were an old firmware bug. In a matter of days, things steadily declined until they were back to the old symptoms. Oh, and we have antivirus installed on every computer, and we keep it up to date. Though I suppose the possibility is still there that someone could have spyware which is bogging down our internet, in which case what is the easiest/best way to find this out? (maybe this should go in a separate question) Thank you for your patience in reading all of this. Do you have any ideas as to what I can try? Is this something that you've experienced before? What sort of tools or methods can I use to try and diagnose the problem? P.S. everything here is Windows. Windows Server 2003 and 2008 on our servers, and Windows XP on employees' machines. Update: We are submitting a ticket to the university to just take a look and see if they see anything unusual and/or can suggestion methods for us to try and pinpoint our problem. Hopefully they'll be helpful! I'll update this to let you know what goes on. Update again: We found a hub (yes, a HUB) right between our campus connection and our firewall. It had only those two ethernet cables plugged into it, nothing else. After removing the hub, our speeds have jumped up to several mbps. However in talking with the campus, we got them to run a gigabit line to our firewall in place of the 100mbps line. As of friday, we are at about 65 mbps up and down (according to speedtest.net at 8am)!! Go NC State!!

    Read the article

< Previous Page | 78 79 80 81 82 83 84  | Next Page >