Search Results

Search found 9750 results on 390 pages for 'sys debug'.

Page 82/390 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

• Upgrading Fusion Middleware 11.1.1.x to 11.1.1.4

  - by James Taylor

  This is a follow on from my previous post where we upgraded 11.1.1.2 to 11.1.1.3. The instructions I provide here will work for Fusion Middleware 11.1.1.2 and 11.1.1.3 wanting to upgrade to 11.1.1.4. In this example I’m just upgrading SOA Suite on OEL 64bit but the steps will be the same, some of the downloads may be different based on your environment. To upgrade to 11.1.1.4 you need to have access to http://support.oracle.com as this is where the downloads reside. Oracle provides 11.1.1.4 as a standalone download so you can do a fresh install if required using OTN downloads (http://www.oracle.com/technetwork/indexes/downloads/index.html). The high level steps to upgrade are as follows: Download software Shutdown you SOA Environment Upgrade WLS to 11.1.1.4 Upgrade SOA Suite to 11.1.1.4 Upgrade OSB to 11.1.1.4 Upgrade MSD Schemas Identify the downloads you require for your install. You will need the WebLogic Server Upgrade and the additional product downloads. If you are using 64bit then use the generic version. The downloads are found from the following location - http://download.oracle.com/docs/html/E18749_01/download_readme.htm#BABDDIIC For the purpose of this post I downloaded the following patches 11060985 – WLS Server Generic 11060960 – SOA Suite 11061005 – OSB Suite You must also download the 11.1.1.4 RCU tool to upgrade the DB schemas. It is available via OTN, or, Oracle Support, I have provided the link from Oracle Support.  11060956 – RCU Make sure you have set the Java executable in your PATH e.g. export PATH=$JAVA_HOME/bin:$PATH  Make sure all your WebLogic environment has been shut down before performing the upgrade. Extract the WLS patch 11060985 to a temporary directory and start the installer java –jar wls1034_upgrade_generic.jar Please note if you are not running 64BIT then the upgrade executable will be just a bin file which you can execute directly. Chose the right Oracle home for your WebLogic Server install. In the Register for Security Updates you can enter your details or just click Next. If you do not enter details confirm that you don’t want to receive these updates Select the products you want to upgrade and select next. It is recommended that you accept the defaults. Confirm the directories that will be upgraded Upgrade of WLS ahs been completed   Extract your both SOA downloads to a temporary directory and run the installer found in Disk1 ./runInstaller -jreLoc /java/jdk1.6.0_20/jre Please note that the java location and version may be different for your environment Skip the Software Updates Ensure your system meets the prerequisites Set the Oracle home for your SOA install. You will be asked to confirm that you want to upgrade, click Yes Choose your application server. Since you are upgrading from 11.1.1.x you will be on WebLogic Start the Install Installation Upgrade of SOA Suite completed accept the default to finish.   In my environment I have OSB installed so I need to upgrade this next. If you don’t have SOA Suite you can go straight to completing the DB Schema updates at Step 24.  Extract the OSB upgrade files to a temporary directory and execute the installer found in the Disk1 folder. ./runInstaller -jreLoc /java/jdk1.6.0_20/jre Skip the software updates Select the Oracle home for your environment Accept the warning to continue the upgrade Point to the location of your WebLogic Server installation Install the OSB upgrade Upgrade has been completed accept the defaults Change directory to $MW_HOME/oracle_common/bin where the Patch Set Assistant is installed Execute the following command to update the MDS schema. Please not for my examples I have the context set to DEV. your may be different. This means that all my schemas are prefixed by DEV. ./psa -dbType Oracle -dbConnectString 'localhost:1521:xe' -dbaUserName sys -schemaUserName DEV_MDS You will be asked you passwords for sys and the schema Enter the database administrator password for "sys": Enter the schema password for schema user "DEV_MDS": Change directory to $MW_HOME/Oracle_SOA1/bin to where the Patch Set Assistant is installed for SOA Suite. Execute the following command to update the SOA and BAM schemas ./psa -dbType Oracle -dbConnectString 'localhost:1521:xe' -dbaUserName sys -schemaUserName DEV_SOAINFRA   To check that you have the installed correctly run the following SQL as sysdba. SELECT owner, version, status FROM schema_version_registry; OWNER                          VERSION                        STATUS ------------------------------ ------------------------------ ----------- DEV_MDS                        11.1.1.4.0                     VALID DEV_SOAINFRA                   11.1.1.4.0                     VALID Don’t stress if the versions are not all sitting at version 11.1.1.4 as not all schemas need to be updated. The key ones are MDS and SOAINFRA

  Read the article

• Don’t miss the Receiving Webcast on November 20th

  - by user793553

  This one-hour session is recommended for technical and functional users who are interested to know about the Receiving transactions and its debugging techniques. TOPICS WILL INCLUDE: Using generic diagnostic scripts. How to read debug logs in receiving. Data flow for various document types (PO, RMA, ISO, IOT) to help debug issues Receiving Transaction processor Generic datafixes.  See DocID 1456150.1 to sign up now!

  Read the article

• SQL SERVER – CXPACKET – Parallelism – Usual Solution – Wait Type – Day 6 of 28

  - by pinaldave

  CXPACKET has to be most popular one of all wait stats. I have commonly seen this wait stat as one of the top 5 wait stats in most of the systems with more than one CPU. Books On-Line: Occurs when trying to synchronize the query processor exchange iterator. You may consider lowering the degree of parallelism if contention on this wait type becomes a problem. CXPACKET Explanation: When a parallel operation is created for SQL Query, there are multiple threads for a single query. Each query deals with a different set of the data (or rows). Due to some reasons, one or more of the threads lag behind, creating the CXPACKET Wait Stat. There is an organizer/coordinator thread (thread 0), which takes waits for all the threads to complete and gathers result together to present on the client’s side. The organizer thread has to wait for the all the threads to finish before it can move ahead. The Wait by this organizer thread for slow threads to complete is called CXPACKET wait. Note that not all the CXPACKET wait types are bad. You might experience a case when it totally makes sense. There might also be cases when this is unavoidable. If you remove this particular wait type for any query, then that query may run slower because the parallel operations are disabled for the query. Reducing CXPACKET wait: We cannot discuss about reducing the CXPACKET wait without talking about the server workload type. OLTP: On Pure OLTP system, where the transactions are smaller and queries are not long but very quick usually, set the “Maximum Degree of Parallelism” to 1 (one). This way it makes sure that the query never goes for parallelism and does not incur more engine overhead. EXEC sys.sp_configure N'cost threshold for parallelism', N'1' GO RECONFIGURE WITH OVERRIDE GO Data-warehousing / Reporting server: As queries will be running for long time, it is advised to set the “Maximum Degree of Parallelism” to 0 (zero). This way most of the queries will utilize the parallel processor, and long running queries get a boost in their performance due to multiple processors. EXEC sys.sp_configure N'cost threshold for parallelism', N'0' GO RECONFIGURE WITH OVERRIDE GO Mixed System (OLTP & OLAP): Here is the challenge. The right balance has to be found. I have taken a very simple approach. I set the “Maximum Degree of Parallelism” to 2, which means the query still uses parallelism but only on 2 CPUs. However, I keep the “Cost Threshold for Parallelism” very high. This way, not all the queries will qualify for parallelism but only the query with higher cost will go for parallelism. I have found this to work best for a system that has OLTP queries and also where the reporting server is set up. Here, I am setting ‘Cost Threshold for Parallelism’ to 25 values (which is just for illustration); you can choose any value, and you can find it out by experimenting with the system only. In the following script, I am setting the ‘Max Degree of Parallelism’ to 2, which indicates that the query that will have a higher cost (here, more than 25) will qualify for parallel query to run on 2 CPUs. This implies that regardless of the number of CPUs, the query will select any two CPUs to execute itself. EXEC sys.sp_configure N'cost threshold for parallelism', N'25' GO EXEC sys.sp_configure N'max degree of parallelism', N'2' GO RECONFIGURE WITH OVERRIDE GO Read all the post in the Wait Types and Queue series. Additionally a must read comment of Jonathan Kehayias. Note: The information presented here is from my experience and I no way claim it to be accurate. I suggest you all to read the online book for further clarification. All the discussion of Wait Stats over here is generic and it varies from system to system. It is recommended that you test this on the development server before implementing on the production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: DMV, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• VS 2010 Debugger Improvements (BreakPoints, DataTips, Import/Export)

  - by ScottGu

  This is the twenty-first in a series of blog posts I’m doing on the VS 2010 and .NET 4 release.  Today’s blog post covers a few of the nice usability improvements coming with the VS 2010 debugger.  The VS 2010 debugger has a ton of great new capabilities.  Features like Intellitrace (aka historical debugging), the new parallel/multithreaded debugging capabilities, and dump debuging support typically get a ton of (well deserved) buzz and attention when people talk about the debugging improvements with this release.  I’ll be doing blog posts in the future that demonstrate how to take advantage of them as well.  With today’s post, though, I thought I’d start off by covering a few small, but nice, debugger usability improvements that were also included with the VS 2010 release, and which I think you’ll find useful. Breakpoint Labels VS 2010 includes new support for better managing debugger breakpoints.  One particularly useful feature is called “Breakpoint Labels” – it enables much better grouping and filtering of breakpoints within a project or across a solution.  With previous releases of Visual Studio you had to manage each debugger breakpoint as a separate item. Managing each breakpoint separately can be a pain with large projects and for cases when you want to maintain “logical groups” of breakpoints that you turn on/off depending on what you are debugging.  Using the new VS 2010 “breakpoint labeling” feature you can now name these “groups” of breakpoints and manage them as a unit. Grouping Multiple Breakpoints Together using a Label Below is a screen-shot of the breakpoints window within Visual Studio 2010.  This lists all of the breakpoints defined within my solution (which in this case is the ASP.NET MVC 2 code base): The first and last breakpoint in the list above breaks into the debugger when a Controller instance is created or released by the ASP.NET MVC Framework. Using VS 2010, I can now select these two breakpoints, right-click, and then select the new “Edit labels…” menu command to give them a common label/name (making them easier to find and manage): Below is the dialog that appears when I select the “Edit labels” command.  We can use it to create a new string label for our breakpoints or select an existing one we have already defined.  In this case we’ll create a new label called “Lifetime Management” to describe what these two breakpoints cover: When we press the OK button our two selected breakpoints will be grouped under the newly created “Lifetime Management” label: Filtering/Sorting Breakpoints by Label We can use the “Search” combobox to quickly filter/sort breakpoints by label.  Below we are only showing those breakpoints with the “Lifetime Management” label: Toggling Breakpoints On/Off by Label We can also toggle sets of breakpoints on/off by label group.  We can simply filter by the label group, do a Ctrl-A to select all the breakpoints, and then enable/disable all of them with a single click: Importing/Exporting Breakpoints VS 2010 now supports importing/exporting breakpoints to XML files – which you can then pass off to another developer, attach to a bug report, or simply re-load later.  To export only a subset of breakpoints, you can filter by a particular label and then click the “Export breakpoint” button in the Breakpoints window: Above I’ve filtered my breakpoint list to only export two particular breakpoints (specific to a bug that I’m chasing down).  I can export these breakpoints to an XML file and then attach it to a bug report or email – which will enable another developer to easily setup the debugger in the correct state to investigate it on a separate machine.  Pinned DataTips Visual Studio 2010 also includes some nice new “DataTip pinning” features that enable you to better see and track variable and expression values when in the debugger.  Simply hover over a variable or expression within the debugger to expose its DataTip (which is a tooltip that displays its value)  – and then click the new “pin” button on it to make the DataTip always visible: You can “pin” any number of DataTips you want onto the screen.  In addition to pinning top-level variables, you can also drill into the sub-properties on variables and pin them as well.  Below I’ve “pinned” three variables: “category”, “Request.RawUrl” and “Request.LogonUserIdentity.Name”.  Note that these last two variable are sub-properties of the “Request” object.   Associating Comments with Pinned DataTips Hovering over a pinned DataTip exposes some additional UI within the debugger: Clicking the comment button at the bottom of this UI expands the DataTip - and allows you to optionally add a comment with it: This makes it really easy to attach and track debugging notes: Pinned DataTips are usable across both Debug Sessions and Visual Studio Sessions Pinned DataTips can be used across multiple debugger sessions.  This means that if you stop the debugger, make a code change, and then recompile and start a new debug session - any pinned DataTips will still be there, along with any comments you associate with them.  Pinned DataTips can also be used across multiple Visual Studio sessions.  This means that if you close your project, shutdown Visual Studio, and then later open the project up again – any pinned DataTips will still be there, along with any comments you associate with them. See the Value from Last Debug Session (Great Code Editor Feature) How many times have you ever stopped the debugger only to go back to your code and say: $#@! – what was the value of that variable again??? One of the nice things about pinned DataTips is that they keep track of their “last value from debug session” – and you can look these values up within the VB/C# code editor even when the debugger is no longer running.  DataTips are by default hidden when you are in the code editor and the debugger isn’t running.  On the left-hand margin of the code editor, though, you’ll find a push-pin for each pinned DataTip that you’ve previously setup: Hovering your mouse over a pinned DataTip will cause it to display on the screen.  Below you can see what happens when I hover over the first pin in the editor - it displays our debug session’s last values for the “Request” object DataTip along with the comment we associated with them: This makes it much easier to keep track of state and conditions as you toggle between code editing mode and debugging mode on your projects. Importing/Exporting Pinned DataTips As I mentioned earlier in this post, pinned DataTips are by default saved across Visual Studio sessions (you don’t need to do anything to enable this). VS 2010 also now supports importing/exporting pinned DataTips to XML files – which you can then pass off to other developers, attach to a bug report, or simply re-load later. Combined with the new support for importing/exporting breakpoints, this makes it much easier for multiple developers to share debugger configurations and collaborate across debug sessions. Summary Visual Studio 2010 includes a bunch of great new debugger features – both big and small.  Today’s post shared some of the nice debugger usability improvements. All of the features above are supported with the Visual Studio 2010 Professional edition (the Pinned DataTip features are also supported in the free Visual Studio 2010 Express Editions)  I’ll be covering some of the “big big” new debugging features like Intellitrace, parallel/multithreaded debugging, and dump file analysis in future blog posts.  Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Solaris 11 pkg fix is my new friend

  - by user12611829

  While putting together some examples of the Solaris 11 Automated Installer (AI), I managed to really mess up my system, to the point where AI was completely unusable. This was my fault as a combination of unfortunate incidents left some remnants that were causing problems, so I tried to clean things up. Unsuccessfully. Perhaps that was a bad idea (OK, it was a terrible idea), but this is Solaris 11 and there are a few more tricks in the sysadmin toolbox. Here's what I did. # rm -rf /install/* # rm -rf /var/ai # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 So far so good. Then comes an oops..... setup-service[168]: cd: /var/ai//service/.conf-templ: [No such file or directory] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This is where you generally say a few things to yourself, and then promise to quit deleting configuration files and directories when you don't know what you are doing. Then you recall that the new Solaris 11 packaging system has some ability to correct common mistakes (like the one I just made). Let's give it a try. # pkg fix installadm Verifying: pkg://solaris/install/installadm ERROR dir: var/ai Group: 'root (0)' should be 'sys (3)' dir: var/ai/ai-webserver Missing: directory does not exist dir: var/ai/ai-webserver/compatibility-configuration Missing: directory does not exist dir: var/ai/ai-webserver/conf.d Missing: directory does not exist dir: var/ai/image-server Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/cgi-bin Missing: directory does not exist dir: var/ai/image-server/images Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/logs Missing: directory does not exist dir: var/ai/profile Missing: directory does not exist dir: var/ai/service Group: 'root (0)' should be 'sys (3)' dir: var/ai/service/.conf-templ Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_data Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_files Missing: directory does not exist file: var/ai/ai-webserver/ai-httpd-templ.conf Missing: regular file does not exist file: var/ai/service/.conf-templ/AI.db Missing: regular file does not exist file: var/ai/image-server/cgi-bin/cgi_get_manifest.py Missing: regular file does not exist Created ZFS snapshot: 2012-12-11-21:09:53 Repairing: pkg://solaris/install/installadm Creating Plan (Evaluating mediators): | DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 3/3 0.0/0.0 0B/s PHASE ITEMS Updating modified actions 16/16 Updating image state Done Creating fast lookup database Done In just a few moments, IPS found the missing files and incorrect ownerships/permissions. Instead of reinstalling the system, or falling back to an earlier Live Upgrade boot environment, I was able to create my AI services and now all is well. # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 Refreshing install services Warning: mDNS registry of service solaris11-x86 could not be verified. Creating default-i386 alias Setting the default PXE bootfile(s) in the local DHCP configuration to: bios clients (arch 00:00): default-i386/boot/grub/pxegrub Refreshing install services Warning: mDNS registry of service default-i386 could not be verified. # installadm create-service -n solaris11u1-x86 --imagepath /install/solaris11u1-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 514/514 292.3/292.3 0B/s PHASE ITEMS Installing new actions 661/661 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11u1-x86 Image path: /install/solaris11u1-x86 Refreshing install services Warning: mDNS registry of service solaris11u1-x86 could not be verified. # installadm list Service Name Alias Of Status Arch Image Path ------------ -------- ------ ---- ---------- default-i386 solaris11-x86 on i386 /install/solaris11-x86 solaris11-x86 - on i386 /install/solaris11-x86 solaris11u1-x86 - on i386 /install/solaris11u1-x86 This is way way better than pkgchk -f in Solaris 10. I'm really beginning to like this new IPS packaging system.

  Read the article

• SQL SERVER – Identify Numbers of Non Clustered Index on Tables for Entire Database

  - by pinaldave

  Here is the script which will give you numbers of non clustered indexes on any table in entire database. SELECT COUNT(i.TYPE) NoOfIndex, [schema_name] = s.name, table_name = o.name FROM sys.indexes i INNER JOIN sys.objects o ON i.[object_id] = o.[object_id] INNER JOIN sys.schemas s ON o.[schema_id] = s.[schema_id] WHERE o.TYPE IN ('U') AND i.TYPE = 2 GROUP BY s.name, o.name ORDER BY schema_name, table_name Here is the small story behind why this script was needed. I recently went to meet my friend in his office and he introduced me to his colleague in office as someone who is an expert in SQL Server Indexing. I politely said I am yet learning about Indexing and have a long way to go. My friend’s colleague right away said – he had a suggestion for me with related to Index. According to him he was looking for a script which will count all the non clustered on all the tables in the database and he was not able to find that on SQLAuthority.com. I was a bit surprised as I really do not remember all the details about what I have written so far. I quickly pull up my phone and tried to look for the script on my custom search engine and he was correct. I never wrote a script which will count all the non clustered indexes on tables in the whole database. Excessive indexing is not recommended in general. If you have too many indexes it will definitely negatively affect your performance. The above query will quickly give you details of numbers of indexes on tables on your entire database. You can quickly glance and use the numbers as reference. Please note that the number of the index is not a indication of bad indexes. There is a lot of wisdom I can write here but that is not the scope of this blog post. There are many different rules with Indexes and many different scenarios. For example – a table which is heap (no clustered index) is often not recommended on OLTP workload (here is the blog post to identify them), drop unused indexes with careful observation (here is the script for it), identify missing indexes and after careful testing add them (here is the script for it). Even though I have given few links here it is just the tip of the iceberg. If you follow only above four advices your ship may still sink. Those who wants to learn the subject in depth can watch the videos here after logging in. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Index, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• How to recreate spfile on Exadata?

  - by Bandari Huang

  Copy spfile from the ASM diskgroup to local disk by using the ASMCMD command line tool.  ASMCMD> pwd +DATA_DM01/EDWBASE ASMCMD> ls -l Type Redund Striped Time Sys Name Y CONTROLFILE/ Y DATAFILE/ Y ONLINELOG/ Y PARAMETERFILE/ Y TEMPFILE/ N spfileedwbase.ora => +DATA_DM01/EDWBASE/PARAMETERFILE/spfile.355.800017117 ASMCMD> cp +DATA_DM01/EDWBASE/spfileedwbase.ora /home/oracle/spfileedwbase.ora.bak Copy the context from spfileedwbase.ora.bak to initedwbase.ora except garbled character. Using above initedwbase.ora, start one of the RAC instances to the mount phase.   SQL> startup mount pfile=/home/oracle/initedwbase.ora Ensure one of the database instances is mounted before attempting to recreate the spfile.  SQL> select INSTANCE_NAME,HOST_NAME,STATUS from v$instance; INSTANCE_NAME HOST_NAME  STATUS ------------- ---------  ------ edwbase1      dm01db01   MOUNTED Create the new spfile. SQL> create spfile='+DATA_DM01/EDWBASE/spfileedwbase.ora' from pfile='/home/oracle/initedwbase.ora'; ASMCMD will show that a new spfile has been created as the alias spfilerac2.ora is now pointing to a new spfile under the PARAMETER directory in ASM. ASMCMD> pwd +DATA_DM01/EDWBASE ASMCMD> ls -l Type Redund Striped Time Sys Name Y CONTROLFILE/ Y DATAFILE/ Y ONLINELOG/ Y PARAMETERFILE/ Y TEMPFILE/ N spfilerac2.ora => +DATA_DM01/EDWBASE/PARAMETERFILE/spfile.356.800013581  Shutdown the instance and restart the database using srvctl using the newly created spfile. SQL> shutdown immediate ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> exit [oracle@dm01db01 ~]$ srvctl start database -d edwbase [oracle@dm01db01 ~]$ srvctl status database -d edwbase Instance edwbase1 is running on node dm01db01 Instance edwbase2 is running on node dm01db02 ASMCMD will now show a number of spfiles exist in the PARAMETERFILE directory for this database. The spfile containing the parameter preventing startups should be removed from ASM. In this case the file spfile.355.800017117 can be removed because spfile.356.800013581 is the current spfile. ASMCMD> pwd +DATA_DM01/EDWBASE ASMCMD> cd PARAMETERFILE ASMCMD> ls -l Type Redund Striped Time Sys Name PARAMETERFILE UNPROT COARSE FEB 19 08:00:00 Y spfile.355.800017117 PARAMETERFILE UNPROT COARSE FEB 19 08:00:00 Y spfile.356.800013581 ASMCMD> rm spfile.355.800017117 ASMCMD> ls spfile.356.800013581 Referenece: Recreating the Spfile for RAC Instances Where the Spfile is Stored in ASM [ID 554120.1]

  Read the article

• 10.04 drops to '(initramfs)' prompt on boot

  - by David Yenor

  I'm not sure what to do to solve the problem, I received this error upon boot. mount: mounting /dev/disk/by-uuid/f60e3ce2-0237-45bb-bf07-581d0090cbc7 on /root failed: Invalid argument mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn't have /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) _

  Read the article

• Better documentation for tasks waiting on resources

  - by SQLOS Team

  The sys.dm_os_waiting_tasks DMV contains a wealth of useful information about tasks waiting on a resource, but until now detailed information about the resource being consumed - sys.dm_os_waiting_tasks.resource_description - hasn't been documented, apart from a rather self-evident "Description of the resource that is being consumed."   Thanks to a recent Connect suggestion this column will get more information added. Here is a summary of the possible values that can appear in this column - Note this information is current for SQL Server 2008 R2 and Denali:   Thread-pool resource owner:•       threadpool id=scheduler<hex-address> Parallel query resource owner:•       exchangeEvent id={Port|Pipe}<hex-address> WaitType=<exchange-wait-type> nodeId=<exchange-node-id> Exchange-wait-type can be one of the following.•       e_waitNone•       e_waitPipeNewRow•       e_waitPipeGetRow•       e_waitSynchronizeConsumerOpen•       e_waitPortOpen•       e_waitPortClose•       e_waitRange Lock resource owner:<type-specific-description> id=lock<lock-hex-address> mode=<mode> associatedObjectId=<associated-obj-id>               <type-specific-description> can be:• For DATABASE: databaselock subresource=<databaselock-subresource> dbid=<db-id>• For FILE: filelock fileid=<file-id> subresource=<filelock-subresource> dbid=<db-id>• For OBJECT: objectlock lockPartition=<lock-partition-id> objid=<obj-id> subresource=<objectlock-subresource> dbid=<db-id>• For PAGE: pagelock fileid=<file-id> pageid=<page-id> dbid=<db-id> subresource=<pagelock-subresource>• For Key: keylock  hobtid=<hobt-id> dbid=<db-id>• For EXTENT: extentlock fileid=<file-id> pageid=<page-id> dbid=<db-id>• For RID: ridlock fileid=<file-id> pageid=<page-id> dbid=<db-id>• For APPLICATION: applicationlock hash=<hash> databasePrincipalId=<role-id> dbid=<db-id>• For METADATA: metadatalock subresource=<metadata-subresource> classid=<metadatalock-description> dbid=<db-id>• For HOBT: hobtlock hobtid=<hobt-id> subresource=<hobt-subresource> dbid=<db-id>• For ALLOCATION_UNIT: allocunitlock hobtid=<hobt-id> subresource=<alloc-unit-subresource> dbid=<db-id> <mode> can be:• Sch-S• Sch-M• S• U• X• IS• IU• IX• SIU• SIX• UIX• BU• RangeS-S• RangeS-U• RangeI-N• RangeI-S• RangeI-U• RangeI-X• RangeX-S• RangeX-U• RangeX-X External resource owner:•       External ExternalResource=<wait-type> Generic resource owner:•       TransactionMutex TransactionInfo Workspace=<workspace-id>•       Mutex•       CLRTaskJoin•       CLRMonitorEvent•       CLRRWLockEvent•       resourceWait Latch resource owner:•       <db-id>:<file-id>:<page-in-file>•       <GUID>•       <latch-class> (<latch-address>)   Further Information Slava Oks's weblog: sys.dm_os_waiting_tasks.Informit.com: Identifying Blocking Using sys.dm_os_waiting_tasks - Ken Henderson   - Guy

  Read the article

• Binding a select in a client template

  I recently got a question on one of my client template posts asking me how to bind a select tags value to data in client templates. I was surprised not to find anything on the web addressing the problem, so I thought Id write a short post about it. It really is very simple once you know where to look. You just need to bind the value property of the select tag, like this: <select sys:value="{binding color}"> If you do it from markup like here, you just need to use the sys: prefix....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Binding a select in a client template

  I recently got a question on one of my client template posts asking me how to bind a select tags value to data in client templates. I was surprised not to find anything on the web addressing the problem, so I thought Id write a short post about it. It really is very simple once you know where to look. You just need to bind the value property of the select tag, like this: <select sys:value="{binding color}"> If you do it from markup like here, you just need to use the sys: prefix....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• lost the vertical scroll function in touchpad after upgrading from 13.04 to 13.10

  - by Lars Lundblad

  just upgraded from Ubuntu 13.04 to Ubuntu 13.10, my Laptop is a Sony SVE1512c6ew, scrolling worked perfectly in Ubuntu 13.04, doesnt work at all in 13.10 Runs Ubuntu 13.10 64bits (btw, tested it i Windows 8 environment works there)Hardware OK, have seen a number of other users with the same problem, well for starters have followed the tip on using the dconf editor, following the path: org gnome settings-daemon peripherals touchpad boxed in all for sure... still cant get vertical scroll...... Any ideas??? Thanks in advance Lars Lundblad / please feel free to mail answers to [email protected] Input device information according to Udev: Input device Subsystem: input Devtype: n/a Name: input7 Number: 7 Sysfs_path: /sys/devices/platform/i8042/serio1/input/input7 Driver: n/a Action: n/a Seqnum: n/a Device type: n/a Device number: 0 Device file: n/a Device file symlinks: n/a Touchpad device Subsystem: input Devtype: n/a Name: mouse1 Number: 1 Sysfs_path: /sys/devices/platform/i8042/serio1/input/input7/mouse1 Driver: n/a Action: n/a Seqnum: n/a Device type: char Device number: 3361 Device file: /dev/input/mouse1 Device file symlinks: /dev/input/by-path/platform-i8042-serio-1-mouse

  Read the article

• Handy SQL Server Function Series: Part 1

  - by Most Valuable Yak (Rob Volk)

  I've been preparing to give a presentation on SQL Server for a while now, and a topic that was recommended was SQL Server functions.  More specifically, the lesser-known functions (like @@OPTIONS), and maybe some interesting ways to use well-known functions (like using PARSENAME to split IP addresses)  I think this is a veritable goldmine of useful information, and researching for the presentation has confirmed that beyond my initial expectations.I even found a few undocumented/underdocumented functions, so for the first official article in this series I thought I'd start with 2 of each, COLLATIONPROPERTY() and COLLATIONPROPERTYFROMID().COLLATIONPROPERTY() provides information about (wait for it) collations, SQL Server's method for handling foreign character sets, sort orders, and case- or accent-sensitivity when sorting character data.  The Books Online entry for  COLLATIONPROPERTY() lists 4 options for code page, locale ID, comparison style and version.  Used in conjunction with fn_helpcollations():SELECT *, COLLATIONPROPERTY(name,'LCID') LCID, COLLATIONPROPERTY(name,'CodePage') CodePage, COLLATIONPROPERTY(name,'ComparisonStyle') ComparisonStyle, COLLATIONPROPERTY(name,'Version') Version FROM fn_helpcollations()You can get some excellent information. (c'mon, be honest, did you even know about fn_helpcollations?)Collations in SQL Server have a unique name and ID, and you'll see one or both in various system tables or views like syscolumns, sys.columns, and INFORMATION_SCHEMA.COLUMNS.  Unfortunately they only link the ID and name for collations of existing columns, so if you wanted to know the collation ID of Albanian_CI_AI_WS, you'd have to declare a column with that collation and query the system table.While poking around the OBJECT_DEFINITION() of sys.columns I found a reference to COLLATIONPROPERTYFROMID(), and the unknown property "Name".  Not surprisingly, this is how sys.columns finds the name of the collation, based on the ID stored in the system tables.  (Check yourself if you don't believe me)Somewhat surprisingly, the "Name" property also works for COLLATIONPROPERTY(), although you'd already know the name at that point.  Some wild guesses and tests revealed that "CollationID" is also a valid property for both functions, so now:SELECT *, COLLATIONPROPERTY(name,'LCID') LCID, COLLATIONPROPERTY(name,'CodePage') CodePage, COLLATIONPROPERTY(name,'ComparisonStyle') ComparisonStyle, COLLATIONPROPERTY(name,'Version') Version, COLLATIONPROPERTY(name,'CollationID') CollationID FROM fn_helpcollations() Will get you the collation ID-name link you…probably didn't know or care about, but if you ever get on Jeopardy! and this question comes up, feel free to send some of your winnings my way. :)And last but not least, COLLATIONPROPERTYFROMID() uses the same properties as COLLATIONPROPERTY(), so you can use either one depending on which value you have available.Keep an eye out for Part 2!

  Read the article

• Developing a SQL Server Function in a Test-Harness.

  - by Phil Factor

  /* Many times, it is a lot quicker to take some pain up-front and make a proper development/test harness for a routine (function or procedure) rather than think ‘I’m feeling lucky today!’. Then, you keep code and harness together from then on. Every time you run the build script, it runs the test harness too.  The advantage is that, if the test harness persists, then it is much less likely that someone, probably ‘you-in-the-future’  unintentionally breaks the code. If you store the actual code for the procedure as well as the test harness, then it is likely that any bugs in functionality will break the build rather than to introduce subtle bugs later on that could even slip through testing and get into production.   This is just an example of what I mean.   Imagine we had a database that was storing addresses with embedded UK postcodes. We really wouldn’t want that. Instead, we might want the postcode in one column and the address in another. In effect, we’d want to extract the entire postcode string and place it in another column. This might be part of a table refactoring or int could easily be part of a process of importing addresses from another system. We could easily decide to do this with a function that takes in a table as its parameter, and produces a table as its output. This is all very well, but we’d need to work on it, and test it when you make an alteration. By its very nature, a routine like this either works very well or horribly, but there is every chance that you might introduce subtle errors by fidding with it, and if young Thomas, the rather cocky developer who has just joined touches it, it is bound to break.     right, we drop the function we’re developing and re-create it. This is so we avoid the problem of having to change CREATE to ALTER when working on it. */ IF EXISTS(SELECT * FROM sys.objects WHERE name LIKE ‘ExtractPostcode’                                      and schema_name(schema_ID)=‘Dbo’)     DROP FUNCTION dbo.ExtractPostcode GO   /* we drop the user-defined table type and recreate it */ IF EXISTS(SELECT * FROM sys.types WHERE name LIKE ‘AddressesWithPostCodes’                                    and schema_name(schema_ID)=‘Dbo’)   DROP TYPE dbo.AddressesWithPostCodes GO /* we drop the user defined table type and recreate it */ IF EXISTS(SELECT * FROM sys.types WHERE name LIKE ‘OutputFormat’                                    and schema_name(schema_ID)=‘Dbo’)   DROP TYPE dbo.OutputFormat GO   /* and now create the table type that we can use to pass the addresses to the function */ CREATE TYPE AddressesWithPostCodes AS TABLE ( AddressWithPostcode_ID INT IDENTITY PRIMARY KEY, –because they work better that way! Address_ID INT NOT NULL, –the address we are fixing TheAddress VARCHAR(100) NOT NULL –The actual address ) GO CREATE TYPE OutputFormat AS TABLE (   Address_ID INT PRIMARY KEY, –the address we are fixing   TheAddress VARCHAR(1000) NULL, –The actual address   ThePostCode VARCHAR(105) NOT NULL – The Postcode )   GO CREATE FUNCTION ExtractPostcode(@AddressesWithPostCodes AddressesWithPostCodes READONLY)  /** summary:   > This Table-valued function takes a table type as a parameter, containing a table of addresses along with their integer IDs. Each address has an embedded postcode somewhere in it but not consistently in a particular place. The routine takes out the postcode and puts it in its own column, passing back a table where theinteger key is accompanied by the address without the (first) postcode and the postcode. If no postcode, then the address is returned unchanged and the postcode will be a blank string Author: Phil Factor Revision: 1.3 date: 20 May 2014 example:      – code: returns:   > Table of  Address_ID, TheAddress and ThePostCode. **/     RETURNS @FixedAddresses TABLE   (   Address_ID INT, –the address we are fixing   TheAddress VARCHAR(1000) NULL, –The actual address   ThePostCode VARCHAR(105) NOT NULL – The Postcode   ) AS – body of the function BEGIN DECLARE @BlankRange VARCHAR(10) SELECT  @BlankRange = CHAR(0)+‘- ‘+CHAR(160) INSERT INTO @FixedAddresses(Address_ID, TheAddress, ThePostCode) SELECT Address_ID,          CASE WHEN start>0 THEN REPLACE(STUFF([Theaddress],start,matchlength,”),‘  ‘,‘ ‘)             ELSE TheAddress END            AS TheAddress,        CASE WHEN Start>0 THEN SUBSTRING([Theaddress],start,matchlength-1) ELSE ” END AS ThePostCode FROM (–we have a derived table with the results we need for the chopping SELECT MAX(PATINDEX([matched],‘ ‘+[Theaddress] collate SQL_Latin1_General_CP850_Bin)) AS start,         MAX( CASE WHEN PATINDEX([matched],‘ ‘+[Theaddress] collate SQL_Latin1_General_CP850_Bin)>0 THEN TheLength ELSE 0 END) AS matchlength,        MAX(TheAddress) AS TheAddress,        Address_ID FROM (SELECT –first the match, then the length. There are three possible valid matches         ‘%['+@BlankRange+'][A-Z][0-9] [0-9][A-Z][A-Z]%’, 7 –seven character postcode       UNION ALL SELECT ‘%['+@BlankRange+'][A-Z][A-Z0-9][A-Z0-9] [0-9][A-Z][A-Z]%’, 8       UNION ALL SELECT ‘%['+@BlankRange+'][A-Z][A-Z][A-Z0-9][A-Z0-9] [0-9][A-Z][A-Z]%’, 9)      AS f(Matched,TheLength) CROSS JOIN  @AddressesWithPostCodes GROUP BY [address_ID] ) WORK; RETURN END GO ——————————-end of the function————————   IF NOT EXISTS (SELECT * FROM sys.objects WHERE name LIKE ‘ExtractPostcode’)   BEGIN   RAISERROR (‘There was an error creating the function.’,16,1)   RETURN   END   /* now the job is only half done because we need to make sure that it works. So we now load our sample data, making sure that for each Sample, we have what we actually think the output should be. */ DECLARE @InputTable AddressesWithPostCodes INSERT INTO  @InputTable(Address_ID,TheAddress) VALUES(1,’14 Mason mews, Awkward Hill, Bibury, Cirencester, GL7 5NH’), (2,’5 Binney St      Abbey Ward    Buckinghamshire      HP11 2AX UK’), (3,‘BH6 3BE 8 Moor street, East Southbourne and Tuckton W     Bournemouth UK’), (4,’505 Exeter Rd,   DN36 5RP Hawerby cum BeesbyLincolnshire UK’), (5,”), (6,’9472 Lind St,    Desborough    Northamptonshire NN14 2GH  NN14 3GH UK’), (7,’7457 Cowl St, #70      Bargate Ward  Southampton   SO14 3TY UK’), (8,”’The Pippins”, 20 Gloucester Pl, Chirton Ward,   Tyne & Wear   NE29 7AD UK’), (9,’929 Augustine lane,    Staple Hill Ward     South Gloucestershire      BS16 4LL UK’), (10,’45 Bradfield road, Parwich   Derbyshire    DE6 1QN UK’), (11,’63A Northampton St,   Wilmington    Kent   DA2 7PP UK’), (12,’5 Hygeia avenue,      Loundsley Green WardDerbyshire    S40 4LY UK’), (13,’2150 Morley St,Dee Ward      Dumfries and Galloway      DG8 7DE UK’), (14,’24 Bolton St,   Broxburn, Uphall and Winchburg    West Lothian  EH52 5TL UK’), (15,’4 Forrest St,   Weston-Super-Mare    North Somerset       BS23 3HG UK’), (16,’89 Noon St,     Carbrooke     Norfolk       IP25 6JQ UK’), (17,’99 Guthrie St,  New Milton    Hampshire     BH25 5DF UK’), (18,’7 Richmond St,  Parkham       Devon  EX39 5DJ UK’), (19,’9165 laburnum St,     Darnall Ward  Yorkshire, South     S4 7WN UK’)   Declare @OutputTable  OutputFormat  –the table of what we think the correct results should be Declare @IncorrectRows OutputFormat –done for error reporting   –here is the table of what we think the output should be, along with a few edge cases. INSERT INTO  @OutputTable(Address_ID,TheAddress, ThePostcode)     VALUES         (1, ’14 Mason mews, Awkward Hill, Bibury, Cirencester, ‘,‘GL7 5NH’),         (2, ’5 Binney St   Abbey Ward    Buckinghamshire      UK’,‘HP11 2AX’),         (3, ’8 Moor street, East Southbourne and Tuckton W    Bournemouth UK’,‘BH6 3BE’),         (4, ’505 Exeter Rd,Hawerby cum Beesby   Lincolnshire UK’,‘DN36 5RP’),         (5, ”,”),         (6, ’9472 Lind St,Desborough    Northamptonshire NN14 3GH UK’,‘NN14 2GH’),         (7, ’7457 Cowl St, #70    Bargate Ward  Southampton   UK’,‘SO14 3TY’),         (8, ”’The Pippins”, 20 Gloucester Pl, Chirton Ward,Tyne & Wear   UK’,‘NE29 7AD’),         (9, ’929 Augustine lane,  Staple Hill Ward     South Gloucestershire      UK’,‘BS16 4LL’),         (10, ’45 Bradfield road, ParwichDerbyshire    UK’,‘DE6 1QN’),         (11, ’63A Northampton St,Wilmington    Kent   UK’,‘DA2 7PP’),         (12, ’5 Hygeia avenue,    Loundsley Green WardDerbyshire    UK’,‘S40 4LY’),         (13, ’2150 Morley St,     Dee Ward      Dumfries and Galloway      UK’,‘DG8 7DE’),         (14, ’24 Bolton St,Broxburn, Uphall and Winchburg    West Lothian  UK’,‘EH52 5TL’),         (15, ’4 Forrest St,Weston-Super-Mare    North Somerset       UK’,‘BS23 3HG’),         (16, ’89 Noon St,  Carbrooke     Norfolk       UK’,‘IP25 6JQ’),         (17, ’99 Guthrie St,      New Milton    Hampshire     UK’,‘BH25 5DF’),         (18, ’7 Richmond St,      Parkham       Devon  UK’,‘EX39 5DJ’),         (19, ’9165 laburnum St,   Darnall Ward  Yorkshire, South     UK’,‘S4 7WN’)       insert into @IncorrectRows(Address_ID,TheAddress, ThePostcode)        SELECT Address_ID,TheAddress,ThePostCode FROM dbo.ExtractPostcode(@InputTable)       EXCEPT     SELECT Address_ID,TheAddress,ThePostCode FROM @outputTable; If @@RowCount>0        Begin        PRINT ‘The following rows gave ‘;     SELECT Address_ID,TheAddress,ThePostCode FROM @IncorrectRows        RAISERROR (‘These rows gave unexpected results.’,16,1);     end   /* For tear-down, we drop the user defined table type */ IF EXISTS(SELECT * FROM sys.types WHERE name LIKE ‘OutputFormat’                                    and schema_name(schema_ID)=‘Dbo’)   DROP TYPE dbo.OutputFormat GO /* once this is working, the development work turns from a chore into a delight and one ends up hitting execute so much more often to catch mistakes as soon as possible. It also prevents a wildly-broken routine getting into a build! */

  Read the article

• How do I reinstate my admin user privileges to global read/write

  - by Matt

  I am running Ubuntu 12.04 LTS. I only have the one user which I created when I installed Ubuntu. Everything has been fine - love it - until I updated a software package recently from the command line using sudo (not gksudo). I was having a little bother which did not make sense to me and in a fluff changed my user read/write privileges through the GUI (not even clear how I got there!). After restart I was stuck in a login loop - using the right login password but kept getting looped back to the login and could only login as Guest. I could still login with my user/password via ctrl + alt + f1 Eventually I was able to login again at start up. Not sure exactly what it was I changed that worked but it was one of/or a combination of installing latest security updates, changing login manager from LightDM to DGM and back again, removing the ICE/Xauthority and chown user. Current dilemma is my primary admin user privileges were read only. In the command line ls -ls /home/user returned this value: drwx------ 48 username username 20480 I have since changed this using sudo chmod 0755 /home/username (from my limited understanding 755 should return my user privileges to their original read/write glory). ls -ld /home/user currently shows my user privileges as: drwxr-xr-x 48 username username 20480 I still seem to have only read access permissions. I've been through lots of threads (and the help file) that talk about creating new users/groups permissions etc. but specific info on returning my existing global/admin/primary users privileges to what they were when I first created that user - baffling me. I feel this is something really simple I'm just not getting it. Please help! sudo mount /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /proc type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusect1 (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=07pe tmpfs55) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw, ,nosuid,nodev,size=5242880 none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/meng/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=meng) none on /tmp/guest-1R2Fi5 type tmpsf (rw,mode=700)

  Read the article

• SQL SERVER – Check If Column Exists in SQL Server Table

  - by Pinal Dave

  A very frequent task among SQL developers is to check if any specific column exists in the database table or not. Based on the output developers perform various tasks. Here are couple of simple tricks which you can use to check if column exists in your database table or not. Method 1 IF EXISTS(SELECT * FROM sys.columns WHERE Name = N'columnName' AND OBJECT_ID = OBJECT_ID(N'tableName')) BEGIN PRINT 'Your Column Exists' END   For AdventureWorks sample database IF EXISTS(SELECT * FROM sys.columns WHERE Name = N'Name' AND OBJECT_ID = OBJECT_ID(N'[HumanResources].[Department]')) BEGIN PRINT 'Your Column Exists' END   Method 2 IF COL_LENGTH('table_name','column_name') IS NOT NULL BEGIN PRINT 'Your Column Exists' END For AdventureWorks sample database IF COL_LENGTH('[HumanResources].[Department]','Name') IS NOT NULL BEGIN PRINT 'Your Column Exists' END Method 3 IF EXISTS( SELECT TOP 1 * FROM INFORMATION_SCHEMA.COLUMNS WHERE [TABLE_NAME] = 'TableName' AND [COLUMN_NAME] = 'ColumnName' AND [TABLE_SCHEMA] = 'SchemaName') BEGIN PRINT 'Your Column Exists' END For AdventureWorks sample database IF EXISTS( SELECT TOP 1 * FROM INFORMATION_SCHEMA.COLUMNS WHERE [TABLE_NAME] = 'Department' AND [COLUMN_NAME] = 'Name' AND [TABLE_SCHEMA] = 'HumanResources') BEGIN PRINT 'Your Column Exists' END Let me know if you know any other method to find if Column Exists in SQL Server Table. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• VFS: file-max limit 1231582 reached

  - by Rick Koshi

  I'm running a Linux 2.6.36 kernel, and I'm seeing some random errors. Things like ls: error while loading shared libraries: libpthread.so.0: cannot open shared object file: Error 23 Yes, my system can't consistently run an 'ls' command. :( I note several errors in my dmesg output: # dmesg | tail [2808967.543203] EXT4-fs (sda3): re-mounted. Opts: (null) [2837776.220605] xv[14450] general protection ip:7f20c20c6ac6 sp:7fff3641b368 error:0 in libpng14.so.14.4.0[7f20c20a9000+29000] [4931344.685302] EXT4-fs (md16): re-mounted. Opts: (null) [4982666.631444] VFS: file-max limit 1231582 reached [4982666.764240] VFS: file-max limit 1231582 reached [4982767.360574] VFS: file-max limit 1231582 reached [4982901.904628] VFS: file-max limit 1231582 reached [4982964.930556] VFS: file-max limit 1231582 reached [4982966.352170] VFS: file-max limit 1231582 reached [4982966.649195] top[31095]: segfault at 14 ip 00007fd6ace42700 sp 00007fff20746530 error 6 in libproc-3.2.8.so[7fd6ace3b000+e000] Obviously, the file-max errors look suspicious, being clustered together and recent. # cat /proc/sys/fs/file-max 1231582 # cat /proc/sys/fs/file-nr 1231712 0 1231582 That also looks a bit odd to me, but the thing is, there's no way I have 1.2 million files open on this system. I'm the only one using it, and it's not visible to anyone outside the local network. # lsof | wc 16046 148253 1882901 # ps -ef | wc 574 6104 44260 I saw some documentation saying: file-max & file-nr: The kernel allocates file handles dynamically, but as yet it doesn't free them again. The value in file-max denotes the maximum number of file- handles that the Linux kernel will allocate. When you get lots of error messages about running out of file handles, you might want to increase this limit. Historically, the three values in file-nr denoted the number of allocated file handles, the number of allocated but unused file handles, and the maximum number of file handles. Linux 2.6 always reports 0 as the number of free file handles -- this is not an error, it just means that the number of allocated file handles exactly matches the number of used file handles. Attempts to allocate more file descriptors than file-max are reported with printk, look for "VFS: file-max limit reached". My first reading of this is that the kernel basically has a built-in file descriptor leak, but I find that very hard to believe. It would imply that any system in active use needs to be rebooted every so often to free up the file descriptors. As I said, I can't believe this would be true, since it's normal to me to have Linux systems stay up for months (even years) at a time. On the other hand, I also can't believe that my nearly-idle system is holding over a million files open. Does anyone have any ideas, either for fixes or further diagnosis? I could, of course, just reboot the system, but I don't want this to be a recurring problem every few weeks. As a stopgap measure, I've quit Firefox, which was accounting for almost 2000 lines of lsof output (!) even though I only had one window open, and now I can run 'ls' again, but I doubt that will fix the problem for long. (edit: Oops, spoke too soon. By the time I finished typing out this question, the symptom was/is back) Thanks in advance for any help. And another update: My system was basically unusable, so I decided I had no option but to reboot. But before I did, I carefully quit one process at a time, checking /proc/sys/fs/file-nr after each termination. I found that, predictably, the number of open files gradually went down as I closed things down. Unfortunately, it wasn't a large effect. Yes, I was able to clear up 5000-10000 open files, but there were still over 1.2 million left. I shut down just about everything. All interactive shells, except for the one ssh I left open to finish closing down, httpd, even nfs service. Basically everything in the process table that wasn't a kernel process, and there were still an appalling number of files apparently left open. After the reboot, I found that /proc/sys/fs/file-nr showed about 2000 files open, which is much more reasonable. Starting up 2 Xvnc sessions as usual, along with the dozen or so monitoring windows I like to keep open, brought the total up to about 4000 files. I can see nothing wrong with that, of course, but I've obviously failed to identify the root cause. I'm still looking for ideas, since I definitely expect it to happen again. And another update, the next day: I watched the system carefully, and discovered that /proc/sys/fs/file-nr showed a growth of about 900 open files per hour. I shut down the system's only NFS client for the night, and the growth stopped. Mind you, it didn't free up the resources, but it did at least stop consuming more. Is this a known bug with NFS? I'll be bringing the NFS client back online today, and I'll narrow it down further. If anyone is familiar with this behavior, feel free to jump in with "Yeah, NFS4 has this problem, go back to NFS3" or something like that.

  Read the article

• Swap partition not recognized (The disk drive with UUID=... is not ready yet or not present)

  - by ladaghini

  I think I had an encrypted swap partition, because I chose to encrypt my home directory during the installation. I believe that's what the line with /dev/mapper/cryptswap1 ... in my /etc/fstab is all about. I did something to bork my swap because on the next boot, I got a message (paraphrased): The disk drive for /dev/mapper/cryptswap1 is not ready yet or not present. Wait to continue. Press S to skip or M to manually recover. (As a side note, pressing S or M seemed to do nothing different from just waiting.) Here's what I've tried: This tutorial on how to fix the swap partition not mounting. However, in the above, the mkswap command fails because the device is busy. So I booted from a live USB, ran GParted to reformat the swap partition (which showed up as an unknown fs type), and chrooted into the broken system to try that tutorial again. I also adjusted /etc/initramfs-tools/conf.d/resume and /etc/fstab to reflect the new UUID generated from formatting the partition as a swap. That still didn't work; instead of /dev/mapper/cryptswap1 not present, "The disk drive with UUID=[swap partition's UUID] is not ready yet or not present..." So I decided to start afresh as though I never had created a swap partition in the first place. From the Live USB, I deleted the swap partition altogether (which, again showed up in GParted as an unknown fs type), removed the swap and cryptswap entries in /etc/fstab as well as removed /etc/initramfs-tools/conf.d/resume and /etc/crypttab. At this point the main system shouldn't be considered broken because there is no swap partition and no instructions to mount one, right? I didn't get any errors during startup. I followed the same instructions to create and encrypt the swap partition, starting with creating a partition for the swap, though I think fdisk said a reboot was necessary to see changes. I was confident the 3rd process above would work, but the problem yet persists. Some relevant info (/dev/sda8 is the swap partition): /etc/fstab file: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=4c11e82c-5fe9-49d5-92d9-cdaa6865c991 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda5 during installation UUID=4031413e-e89f-49a9-b54c-e887286bb15e /boot ext4 defaults 0 2 # /home was on /dev/sda7 during installation UUID=d5bbfc6f-482a-464e-9f26-fd213230ae84 /home ext4 defaults 0 2 # swap was on /dev/sda8 during installation UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 output of sudo mount: /dev/sda6 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda5 on /boot type ext4 (rw) /dev/sda7 on /home type ext4 (rw) /home/undisclosed/.Private on /home/undisclosed type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=cbae1771abd34009,ecryptfs_fnek_sig=7cefe2f59aab8e58) gvfs-fuse-daemon on /home/undisclosed/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=undisclosed) output of sudo blkid (note that /dev/sda8 is missing): /dev/sda1: LABEL="SYSTEM" UUID="960490E80490CC9D" TYPE="ntfs" /dev/sda2: UUID="D4043140043126C0" TYPE="ntfs" /dev/sda3: LABEL="Shared" UUID="80F613E1F613D5EE" TYPE="ntfs" /dev/sda5: UUID="4031413e-e89f-49a9-b54c-e887286bb15e" TYPE="ext4" /dev/sda6: UUID="4c11e82c-5fe9-49d5-92d9-cdaa6865c991" TYPE="ext4" /dev/sda7: UUID="d5bbfc6f-482a-464e-9f26-fd213230ae84" TYPE="ext4" /dev/mapper/cryptswap1: UUID="41fa147a-3e2c-4e61-b29b-3f240fffbba0" TYPE="swap" output of sudo fdisk -l: Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xdec3fed2 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 210135039 104862720 7 HPFS/NTFS/exFAT /dev/sda3 210135040 415422463 102643712 7 HPFS/NTFS/exFAT /dev/sda4 415424510 625141759 104858625 5 Extended /dev/sda5 415424512 415922175 248832 83 Linux /dev/sda6 415924224 515921919 49998848 83 Linux /dev/sda7 515923968 621389823 52732928 83 Linux /dev/sda8 621391872 625141759 1874944 82 Linux swap / Solaris Disk /dev/mapper/cryptswap1: 1919 MB, 1919942656 bytes 255 heads, 63 sectors/track, 233 cylinders, total 3749888 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xaf5321b5 /etc/initramfs-tools/conf.d/resume file: RESUME=UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 /etc/crypttab file: cryptswap1 /dev/sda8 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 output of sudo swapon -as: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 1874940 0 -1 output of sudo free -m: total used free shared buffers cached Mem: 1476 1296 179 0 35 671 -/+ buffers/cache: 590 886 Swap: 1830 0 1830 So, how can this be fixed?

  Read the article

• Database Owner Conundrum

  - by Johnm

  Have you ever restored a database from a production environment on Server A into a development environment on Server B and had some items, such as Service Broker, mysteriously cease functioning? You might want to consider reviewing the database owner property of the database. The Scenario Recently, I was developing some messaging functionality that utilized the Service Broker feature of SQL Server in a development environment. Within the instance of the development environment resided two databases: One was a restored version of a production database that we will call "RestoreDB". The second database was a brand new database that has yet to exist in the production environment that we will call "DevDB". The goal is to setup a communication path between RestoreDB and DevDB that will later be implemented into the production database. After implementing all of the Service Broker objects that are required to communicate within a database as well as between two databases on the same instance I found myself a bit confounded. My testing was showing that the communication was successful when it was occurring internally within DevDB; but the communication between RestoreDB and DevDB did not appear to be working. Profiler to the rescue After carefully reviewing my code for any misspellings, missing commas or any other minor items that might be a syntactical cause of failure, I decided to launch Profiler to aid in the troubleshooting. After simulating the cross database messaging, I noticed the following error appearing in Profiler: An exception occurred while enqueueing a message in the target queue. Error: 33009, State: 2. The database owner SID recorded in the master database differs from the database owner SID recorded in database '[Database Name Here]'. You should correct this situation by resetting the owner of database '[Database Name Here]' using the ALTER AUTHORIZATION statement. Now, this error message is a helpful one. Not only does it identify the issue in plain language, it also provides a potential solution. An execution of the following query that utilizes the catalog view sys.transmission_queue revealed the same error message for each communication attempt: SELECT     * FROM        sys.transmission_queue; Seeing the situation as a learning opportunity I dove a bit deeper. Reviewing the database properties  The owner of a specific database can be easily viewed by right-clicking the database in SQL Server Management Studio and selecting the "properties" option. The owner is listed on the "General" page of the properties screen. In my scenario, the database in the production server was created by Frank the DBA; therefore his server login appeared as the owner: "ServerName\Frank". While this is interesting information, it certainly doesn't tell me much in regard to the SID (security identifier) and its existence, or lack thereof, in the master database as the error suggested. I pulled together the following query to gather more interesting information: SELECT     a.name     , a.owner_sid     , b.sid     , b.name     , b.type_desc FROM        master.sys.databases a     LEFT OUTER JOIN master.sys.server_principals b         ON a.owner_sid = b.sid WHERE     a.name not in ('master','tempdb','model','msdb'); This query also helped identify how many other user databases in the instance were experiencing the same issue. In this scenario, I saw that there were no matching SIDs in server_principals to the owner SID for my database. What login should be used as the database owner instead of Frank's? The system stored procedure sp_helplogins will provide a list of the valid logins that can be used. Here is an example of its use, revealing all available logins: EXEC sp_helplogins;  Fixing a hole The error message stated that the recommended solution was to execute the ALTER AUTHORIZATION statement. The full statement for this scenario would appear as follows: ALTER AUTHORIZATION ON DATABASE:: [Database Name Here] TO [Login Name]; Another option is to execute the following statement using the sp_changedbowner system stored procedure; but please keep in mind that this stored procedure has been deprecated and will likely disappear in future versions of SQL Server: EXEC dbo.sp_changedbowner @loginname = [Login Name]; .And They Lived Happily Ever After Upon changing the database owner to an existing login and simulating the inner and cross database messaging the errors have ceased. More importantly, all messages sent through this feature now successfully complete their journey. I have added the ownership change to my restoration script for the development environment.

  Read the article

• Reinstalling GRUB2 on Ubuntu 12.04 | Windows 7 dual boot after Windows reinstallation

  - by Shasteriskt

  So I had the perfect Ubuntu 12 / Windows 7 dual boot set-up -- until I had to re-install Windows 7. After the deed, GRUB2 was of course wiped out, thus my Ubuntu installation is rendered inaccessible. I have tried these steps: mount /dev/sda5 /mnt #This is where my Ubuntu installation resides. mount /dev/sda1 /mnt/boot #Indicated by the `*` under `Boot` when doing `fdisk -l` mount --bind /mnt/proc /proc mount --bind /mnt/sys /sys mount --bind /mnt/dev /dev sudo chroot mnt sudo grub-install /dev/sda sudo update-grub #Then unmounted everything... Unfortunately, only my Windows 7 has been detected and the Ubuntu entries never appeared in the prompt. Only my Windows 7 installation (/dev/sda1) is available in the GRUB2 menu. How can I rectify this?

  Read the article

• GPU hung when switching graphic card

  - by Lie Ryan

  I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

  Read the article

• Setting a display's backlight brightness to be lower than is possible via the normal brightness controls

  - by Drew Noakes

  By normal brightness controls I mean the accelerators on my laptop's keyboard that seem to integrate with Unity. In a dark room, my screen is quite bright, even on the lowest setting. Can I override this? I tried setting it explicitly via both: sudo echo 500 > /sys/class/backlight/acpi_video0/actual_brightness sudo echo 500 > /sys/class/backlight/intel_backlight/actual_brightness But I get a permission denied error. When at the lower bounds via my keyboard's brighness controls, acpi_video0/actual_brightness is 0, and intel_backlight/actual_brightness is 729. Can I set the latter value to be even lower?

  Read the article

• How do I mount my External HDD with filesystem type errors?

  - by Snuggie

  I am a relatively new Ubuntu user and I am having some difficulty mounting my external 2TB HDD. When I first installed Linux my external HDD was working just fine, however, it has stopped working and I have a lot of important files on there that I need. Before my HDD would automatically mount and no worries. Now, however, it doesn't automatically mount and when I try to manually mount it I keep running into filesystem type errors that I can't seem to get past. Below are images that depict my step by step process of how I am trying to mount my HDD along with the errors I am receiving. If anybody has any idea what I am doing wrong or how to correct the issue I would greatly appreciate it. Step 1) Ensure the computer recognizes my external HDD. pj@PJ:~$ dmesg ... [ 5790.367910] scsi 7:0:0:0: Direct-Access WD My Passport 0748 1022 PQ: 0 ANSI: 6 [ 5790.368278] scsi 7:0:0:1: Enclosure WD SES Device 1022 PQ: 0 ANSI: 6 [ 5790.370122] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 5790.370310] ses 7:0:0:1: Attached Enclosure device [ 5790.370462] ses 7:0:0:1: Attached scsi generic sg3 type 13 [ 5792.971601] sd 7:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5792.972148] sd 7:0:0:0: [sdb] Write Protect is off [ 5792.972162] sd 7:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 5792.972591] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.972605] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.975235] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.975249] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.987504] sdb: sdb1 [ 5792.988900] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.988911] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.988920] sd 7:0:0:0: [sdb] Attached SCSI disk Step 2) Check if it mounted properly (it does not) pj@PJ:~$ df -ah Filesystem Size Used Avail Use% Mounted on /dev/sda1 682G 3.9G 644G 1% / proc 0 0 0 - /proc sysfs 0 0 0 - /sys none 0 0 0 - /sys/fs/fuse/connections none 0 0 0 - /sys/kernel/debug none 0 0 0 - /sys/kernel/security udev 2.9G 4.0K 2.9G 1% /dev devpts 0 0 0 - /dev/pts tmpfs 1.2G 928K 1.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.9G 156K 2.9G 1% /run/shm gvfs-fuse-daemon 0 0 0 - /home/pj/.gvfs Step 3) Try mounting manually using NTFS and VFAT (both as SDB and SDB1) pj@PJ:~$ sudo mount /dev/sdb /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount /dev/sdb1 /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t ntfs /dev/sdb /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t vfat /dev/sdb /media/Passport/ mount: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so pj@PJ:~$ sudo mount -t ntfs /dev/sdb1 /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t vfat /dev/sdb1 /media/Passport/ mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so

  Read the article

• sudo & redirect output

  - by Khaled

  I have a small question regarding using sudo with output redirect >. To enable IP forwrding, someone can use the command: $ echo 1 > /proc/sys/net/ipv4/ip_forward Executing this command will give permission denied as it requires root privileges. However, executing the same command with sudo gives also permission denied error! It seems that output redirect > does not inherit the permissions of the preceding command echo. Is this right? As a workaround I do: $ echo 1 | sudo tee /proc/sys/net/ipv4/ip_forward Is this the best way to do it? Am I missing something? Please, note that this is an example and it applies to all commands that use output redirect.

  Read the article

• Initramfs error during boot

  - by PoohJuice

  Boot from (hd0,0) ext3 238ac8ca-9576-443d-8e23-8dd836cd2683 Starting up ... mount: mounting /dev/disk/by-uuid/238ac8ca-9576-443d-8e23-8dd836cd2683 on /root failed: Invalid argument mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built in shell (ash) Enter 'help' for a list of built-in commands.

  Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >