Search Results

Search found 2895 results on 116 pages for 'wes weeks'.

Page 82/116 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

• IBM Thinkpad 240 - Best way to boot from floppy to USB - Best Linux for 300 MHz 128 MB RAM 800x600 s

  - by zillion

  Mostly I still have that old 'ultraportable' laptop that is mostly like a pre-netbook era laptop and a friend and programmer needs a computer because the one he was using just broke and he has to wait until the new one arrive in 4-6 weeks ... This laptop has no LAN connection and CD-ROM so be prepared for a real challenge! All hardware is well supported on Windows XP (included drivers on the Windows XP CD) and on Linux out-of-the-box (but the screen need a special configuration.) Mostly any Linux that will work well with Skype (USB or regular headset), any MSN client and a text writer for code will do. What I have tested so far: Slitaz 2 don't boot because the floppy of GRUB4DOS don't see the USB drive (fully working and tested on my regular laptop), Damn Small Linux was working but was needing a special screen configuration that I don't remember (in the boot options of the floppy) and now I'm thinking about Puppy Linux that is seen to work totally out of the box with it but I will need an old Puppy version (1 or 2 I think) and the Wakepup floppy ... If you got some ideas to help or to try I'm open!

  Read the article

• How will I support 100,000 requests an hour?!

  - by tylerl

  I know this question is a little strange but I got lucky with an idea and I need some numbers to use for when I try to make a deal with a company. I'm wondering how much it'll cost me to run a site that's heavy on PHP and gets between 70,000 and 100,000 requests an hour on something like Rackspace's Cloud Servers. I have no idea how many servers I need or how much RAM each one should have. There will be a decent number of images on the site (probably something like 10,000 in the first couple weeks) and the site runs on about 2,500 lines of PHP code. I figure I should sign up for a CDN of some kind, although CDN In A Box is all I've heard of and I'm not sure it's necessary for a site that's already on a cloud platform. I've obviously never done anything like this before so I'm just looking to get an estimation of what I need for this massive site... Also, I use a database and I was wondering how that works - would I dedicate one of the cloud servers to running the database or would I need to put the database into each of the cloud servers? Thanks in advance...

  Read the article

• Intermittent CNAME forwarding

  - by Godric Seer

  I host a personal website on an old desktop that is LAMP based. Since I have a dynamic IP, I use no-ip to make sure I have a working domain name at all times. I also have a domain I have bought on GoDaddy where I have a CNAME record forwarding the www subdomain to my no-ip domain. At all times, I can connect to my website through the no-ip domain without issue. For the past several weeks, I never had an issue using the GoDaddy domain to connect (ssh or https). As of today, however, the GoDaddy domain only works for about 10 minutes at a time. I get server not found errors most of the time. Also, if I happen to be using the GoDaddy domain for an ssh connection, the connection will freeze. I have attempted to run tests using a couple of online DNS check websites, but have not gotten any errors at any time. I also contacted GoDaddy support but they had no issues connecting to the website, and therefore did not see any issues. I would like advice on how I could debug/resolve this issue. Since the problem appeared without me changing anything on my end, I hope it will resolve itself, but knowing the cause in case it happens again would be preferable. EDIT: I changed the configuration in GoDaddy to create an A (Host) that points at my current IP. This works fine, so I can access the site through the GoDaddy domain without the preceding www. I am currently waiting for a new CNAME record to propagate that points the www subdomain at the main host, rather than my no-ip domain.

  Read the article

• GlassFish v3: Security related updates + Repository/Publisher?

  - by chris_l

  I've used GlassFish v3.0 as my main development application server for a few weeks now. Now that I want to install it on my VPS, I'd like to get the latest security updates, because Glassfish v3 Release 3.0 (Open Source Edition or not) is already a few months old, and v3.1 is only available as "early access" nightlies (see https://glassfish.dev.java.net/public/downloadsindex.html). GlassFish offers an update mechanism (via pkg or updateTool), but when I simply try to get the latest updates (pkg image-update), it finds nothing. However, when I change the preferred publisher to dev.glassfish.org, I get a list with lots of updates. The interesting thing is, that I haven't been able to find any description about the contents of the diverse publishers/repositories (release, stable, contrib and dev) anywhere on the web, most importantly answering the question: Am I supposed to use the dev repository for security updates, or does it contain unstable updates? (The name suggests unstable updates, but the version numbers, like "3.0.1,0-11:20100331T082227Z" leave me guessing. The build is more than a week old, so it's obviously not "nightly" or "weekly", but what is it?) Where do I get security updates from then? Or are there simply no security updates yet? Asking on the GlassFish forum resulted in 56 views, but 0 answers.

  Read the article

• Why is my Network Connections list empty?

  - by DealerNextDoor

  I'm sure this question has been asked before, but none of the links I have found have worked. I've been trying to find fixes for the past couple of weeks. This all started a few days after I got my router. At first, I thought it was just something that would fix it self. But as usual, it never does. I am trying to update my router's wireless card to try and fix this problem, but I need to get the card's information to update it on the HP website. And since my Network Connections list is empty, I can't get any information about it. So to get around this, I tried to go to 'Manage Wireless Networks', and when I tried to get the properties from there, I get this error: Windows has encounter an error saving the wireless profile. Specific Error: The data is invalid. So, what all can I do to try and fix this? Any help will be appreciated. EDIT: Sorry, forgot to put router info. Router Model: WNR1000v2-V2 Router Maker: NETGEAR Router Firmware Version: V1.0.0.12NA The router is up-to-date on all updates.

  Read the article

• Why is this file hidden when you run ls?

  - by luckytaxi

  For a few weeks now I couldn't figure out why I wasn't able to delete this one particular file. As root I can, but my shell script runs as a different user. So I go run ls -la and it's not there. However, if I call it as a parameter, it shows up! Sure enough, the owner is root, hence I'm not able to delete. Notice, 6535 is missing ... [root@server]# ls -la 653* -rw-rw-r-- 1 svn svn 24002 Mar 26 01:00 653 -rw-rw-r-- 1 svn svn 7114 Mar 26 01:01 6530 -rw-rw-r-- 1 svn svn 8653 Mar 26 01:01 6531 -rw-rw-r-- 1 svn svn 6836 Mar 26 01:01 6532 -rw-rw-r-- 1 svn svn 3308 Mar 26 01:01 6533 -rw-rw-r-- 1 svn svn 3918 Mar 26 01:01 6534 -rw-rw-r-- 1 svn svn 3237 Mar 26 01:01 6536 -rw-rw-r-- 1 svn svn 3195 Mar 26 01:01 6537 -rw-rw-r-- 1 svn svn 27725 Mar 26 01:01 6538 -rw-rw-r-- 1 svn svn 263473 Mar 26 01:01 6539 Now it shows up if you call it directly. [root@server]# ls -la 6535 -rw-rw-r-- 1 root root 3486 Mar 26 01:01 6535

  Read the article

• Citrix Metaframe/RD - screen refresh weirdness

  - by southof40

  I access a clients W2003 machine (XEN Virtualization) using RD over Citrix Metaframe. Everything used to be fine. Some weeks ago things turned bad ! All is well initially but after, say, 5 minutes the screen will stop refreshing. Rather weirdly you can then still proceed in a way as you can make the screen refresh by getting the RD window to go through a restore/maximise cycle (this is only possible using the ALT-BREAK shortcut as everything else is locked up). This then allows you to proceed by typing something and going ALT-BREAK to see the results. Using menus is just not possible at all. There's some indications that clearing the java cache between sessions helps. Also that the lockup happens more quickly if you make the 'lots of stuff happen' on the screen - for instance if you do a directory listing of a big directory then often that will cause the lockup to occur. Similary opening a dense Excel workbook and then scrolling it will cause the lockup to occur. Any Metaframe veterans out there who recognise these symptoms ? I'd be very grateful as it's driving me nuts.

  Read the article

• Recovering Data from a Linkstation LS-WXL/R1

  - by kingkool68

  I've been running a Buffalo Linkstation LS-WXL/R1 in RAID1 for a few weeks. Two nights ago we had a brief power outage. Yesterday when I tried to mount the disk it couldn't be found. I logged in to the web admin and it couldn't see any storage attached and no arrays available. Well this sucks. I ended up taking the disks out and mounting them to an Ubuntu virtual machine. They how up as an Array but I can't start the Array to the best of my limited knowledge. I could still see the 6 partitions, so I'm confident the data is there. I can use Photorec (http://www.cgsecurity.org/wiki/PhotoRec) to recover most of the files I want, it just takes some time. Could I make an image of the data partition and mount that in Ubuntu so I can get at the data I want through the file system? 95% of the data on my Linkstation LS-WXL/R1 is backup. I just put a few folders of images on there that I need to get back. I'm already preparing to format the disks when I'm done and re-building the RAID1 array from scratch. Any advice would be appreciated.

  Read the article

• Proper Network Infastructure Setup DMZ, VPN, Routing Hardware Question

  - by NickToyota

  Greetings Server Fault Universe, So here's a quick background. Two weeks ago I started a new position as the systems administrator for an expanding health services company of just over 100 persons. The individual I was replacing left the company with little to no notice. Basically, I have inherited a network of one main HQ (where I am situated) which has existed for over 10 years, with five smaller offices (less than 20 persons). I am trying to make sense of the current setup. The network at the HQ includes: Linksys RV082 Router providing internet access for employees and site to site VPN connecting the smaller offices (using an RV042 each). We have both cable and dsl lines connected to balance traffic (however this does not work at all and is not my main concern right now). Cisco Ironport appliance. This is the main gateway for our incoming and outgoing emails. This also has an external IP and internal IP. Lotus domino in and out email servers connected to the mentioned Cisco gateway. These also have an external IP and internal IP. Two windows 2003 and 2008 boxes running as domain controllers with DNS of course. These also have both an external IP and internal IP. Website and web mail servers also on both external and internal IPs. I am still confused as why there are so many servers connected directly to the internet. I am seriously looking to redesign this setup with proper security practices in mind (my highest concern) and am in need of a proper firewall setup for the external/internal servers along with a VPN solution about 50 employees. Budget is not a concern as I have been given some flexibility to purchase necessary solutions. I have been told Cisco ASA appliance may help. Does anyone out in the Server Fault Universe have some recommendations? Thank you all in advance.

  Read the article

• SQL Server 2008 R2 mirroring failing

  - by andriusn

  I have two Windows 2008 R2 (Amazon EC2) instances running SQL Server 2008 R2. I use 9TB striped disks (9x1TB EBS volumes) for storage. One server is running as principal and second one as mirror. Both started from the same image, database and tlog files located on striped disk. Mirror server failed 3 times in last 2 months with errors: EventID 823 The operating system returned error 2(The system cannot find the file specified.) to SQL Server during a write at offset 0x00000048058a00 in file 'D:\TLogs***_log.ldf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. and EventID 1454 Database mirroring will be suspended. Server instance 'xxxxxxxxxx' encountered error 823, state 6, severity 24 when it was acting as a mirroring partner for database '***'. The database mirroring partners might try to recover automatically from the error and resume the mirroring session. For more information, view the error log for additional error messages. followed by EventID 19019 The MSSQLSERVER service terminated unexpectedly. After this rebooting instance is necessary to restore mirroring. First two times I thought it was hardware related (striped disk failure) and relaunched instance on new hardware. But the issue is back after few weeks again. It only affects mirror instances. Any help would be really appreciated. Thanks.

  Read the article

• Windows 8: Clean Install Fails BEFORE country Screen

  - by Mark

  G'day, I've been trying to (clean) install Windows 8 on my PC now for over two weeks now, and it's really getting old. You can see here that I've outlined my issue to the Windows Technical Community, which has resulted in... absolutely no help at all. http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/windows-8-clean-install-fails-before-country/64229d0a-0220-45a9-bdc6-c41062df8a75 Tl;dr? Yeah, me too. Basically, I've shrunk the HDD, it's working (I'm on that PC on XP). I've put both the x64 and the x86 DVD's, AND an another HDD with W8 installed on it from my test machine, and they ALL Fail to load. (I get the slanty windows logo, and after about 10 seconds BOOM. Sad face error screen.) I really don't want to have to remove the video card, or the unevenly/not partnered DIMM in the 2nd Memory channel - because the case is .. stupid, and in an awkward spot, but I'm running out of ideas! PS. I tried turning on ACHI tonight. All that resulted in was XP wigging out about new drivers & explorer.exe crashing. Fun times! :(

  Read the article

• GlassFish v3: Security related updates?

  - by chris_l

  I've used GlassFish v3.0 as my main development application server for a few weeks now. Now that I want to install it on my VPS, I'd like to get the latest security updates, because Glassfish v3 Release 3.0 (Open Source Edition or not) is already a few months old, and v3.1 is only available as "early access" nightlies (see https://glassfish.dev.java.net/public/downloadsindex.html). GlassFish offers an update mechanism (via pkg or updateTool), but when I simply try to get the latest updates (pkg image-update), it finds nothing. However, when I change the preferred publisher to dev.glassfish.org, I get a list with lots of updates. The interesting thing is, that I haven't been able to find any description about the exact meaning of the diverse publishers/repositories (release, stable, contrib and dev) anywhere on the web, most importantly answering the question: Am I supposed to use the "dev" repository for security updates, or is it (probably more likely) for unstable updates? Where do I get security updates from then? Or are there simply no security updates yet? Asking on the GlassFish forum resulted in 56 views, but 0 answers.

  Read the article

• Primary zone will not transfer to secondary zone

  - by Matt Beckman

  Using DNS on Windows Server 2008, there is a constant struggle with adding primary and secondary zones. I will add a primary zone to NS1 for a new domain, edit it as needed, and when it's ready add the secondary zone to NS2. However, MOST of the time, the secondary zone remains in an error state, and will never acquire the primary zone data. I have gone back to domains a few weeks after adding them to find out that Windows never propagated the change. Annoying. Anyway, I recently updated SP1 to SP2 thinking this would help, but it hasn't. I added two new domains today, and spent an hour after the secondary zone would just not sync. During that time, the only error in the logs I had seen was for one of them where DNS complained about not being authoritative. In order to eventually resolve the issue, I ended up deleting the primary zone, creating a new primary zone, and hitting "Apply" after each and every field change. For example, after modifying the serial number from "1" to a date appropriate "2010093001", I hit apply, and then the Primary Server (apply), Responsible Person (apply), and finally Name Servers (apply). After I did this, the secondary zone didn't waste any time getting the data. Ideas?

  Read the article

• ADO 2.8, VMWare and SQL Server - sudden bulk dropped connections

  - by CodeByMoonlight

  We have an overworked server currently running a single SQL Server 2000 instance on physical hardware, and about 40 different apps interact with it on a daily basis. Last year, the RAID controller failed and we had no spare, so IT Support hurriedly migrated it overnight to a copy running on a VMWare Server. While it was on that server everything ran much quicker due to it being a big improvement in spec. However, the biggest app using it had occasional serious errors which never occurred on physical hardware. Specifically, several times a week it would disconnect batches of users - anywhere from just ten to hundreds at once, and all at the same time. It didn't affect any particular users or PCs or offices - all were affected equally. The only common thing was the app, which is a VB6 app using ADO 2.8 to connect. The other apps connecting to that virtualised instance of SQL Server seemingly had no problems, although they were (and are) responsible for only a tiny fraction of the work involving this server. The upshot is that after about two weeks of loving the speed and hating the random mass disconnections (which we were never able to find a cause for), we sadly took the decision to return to physical hardware and the disconnections vanished. Now we've reached the point where the old server just can't handle all that's being asked of it, and we're intending to migrate everything to 2 or more other servers. The snag is that there's a good chance they'll have to be virtual ones again. Given what happened last time, I'm trying to find out what possible reasons there could be for these mass disconnections. We were running VMWare ESX, but the network is Novell-based. Also, the server had a linked server setup to connect to an Informix server using a known-to-be-buggy ODBC driver, and this is used throughout the day. Any ideas on the cause(s)?

  Read the article

• ntpd on Fedora Core 6 with high negative time reset values

  - by Mark White

  The basic problem is we have a FC6 server instance running on a virtual machine, and the system time seems to have been slowly varying until it is now causing a problem. The server runs 24/7 and has been up for 155 days. It has been changed to show GMT, and reports the time as (example) 00:15:15 GMT whereas the actual time is 00:00:00 GMT. This is an offset of 915 seconds. selinux has been changed to 'setenforce 0' for testing and I am running as root. I stop the ntpd service and change the time in System|Administration|Date & Time. The time still shows the same with 'date' in bash. There are no error logs. I change the date with 'date --set' in bash. The response confirms the changed date. I run 'date' and the incorrect date is shown. There are no error logs. I start the ntpd service and /var/log/messages shows success with 'time reset -915.720139s'. The date remains unchanged. ntpq -p shows three three time servers all have offsets of around -915 seconds. I stop ntpd service and try 'ntpd -gqx' and get the same result as above - success, but a large negative time reset. I've tried varying combinations of the above, and a few more settings in System|Administration|Date & Time - no change. I just need to reset the system time to GMT. No offset. But I can't wait for ntpd to slew the time over the next few weeks. Any advice is welcome, cheers! Surely this shouldn't be this difficult... Mark...

  Read the article

• CouchDB Errors: "undefined symbol: js_fgets" on Ubuntu 10.04

  - by MattEzell

  Hello, ServerFault Community. I have been wrestling with this problem for weeks without resolution and was hoping that someone here might be able to help. As indicated above, this is in Ubuntu 10.04 (x86) using CouchDB 0.11.0. I have build and installed CouchDB 0.11.0 from source. Everything with the dependencies and with the CouchDB install itself 'goes off without a hitch' - no errors or complaints in the configure, make or install... CouchDB seems to be running 'fine'. I can access Futon without issue and utilize all CouchDB functionality found in Futon... Unfortunately, when I attempt to use any shows/views for an installed Couch App, I get the above js_fgets error before terminal (and the Couch log) fills up with TONS of JSON. Nothing ever renders in the browser, though Firebugs reports. I have used the official instructions (paying special attention to the 10.04 instructions) and have followed pretty much every Google thread that I can find on similar issues. I have chase SpiderMonkey (and Rhino) as well as Erlang as the culprit, but despite reinstalls and tests with these components, I still cannot get past this CouchDB issue on my system... Ideas? Pointers? Suggestions? Has anyone successfully installed and used CouchDB 0.11.0 on an Ubuntu 10.04 system to RUN APPLICATIONS? I have come across multiple individuals who immediately respond 'yes, I have it installed - it works great' only to have them realize in the end (as I did) that just because Futon thinks things are working, doesn't mean CouchDB is properly handling ALL requests. Thank you for your time and assistance!

  Read the article

• My desktop has started overheating -- how hot is hot?

  - by Jerry

  I have a two year old desktop, some random quad core HP desktop. It used to run very quietly, but in the past month, the fans start up anytime anything "serious" is being done -- compiles, playing video, etc. Right now, speedfan and speccy report the cores are between 50C and 70C. Speedfan reports this as hot. (Nice flame icon.) Well, the system does sit on my carpet, so two weeks ago, I took off the lid, and cough *cough* it was pretty filled with dust. I got out an air can, turned on a vacuum and carefully got out all the dust that I saw on the CPU fan the case fans any fan I saw (graphics board) and blew out all the dust I could from all the circuit boards. And then I closed the case back up. It has definitely run cooler since then, but it still runs hot, and I hear high speed fan noise I never heard before. How hot is too hot? At what temps do consumer grade CPUs die? What should I be looking to do? Replace CPU fan? (It seems to work) Replace power supply fan? Assuming the dust problem is gone, where should I be looking to determine why the machine is heating up? Epilogue: After following the various pieces of advice given here, the system did run cooler, but it was still noticeably running louder (hotter) than just a few months prior. I ended up purchasing a new cpu heatsink and fan and during installation found the cooling grease from the original heatsink was just a dried, cracked layer, probably more of an insulator than heat transfer agent. With the new fan AND the new heatsink compound, the system ran much much cooler and the fan rarely turns on.

  Read the article

• ColdFusion 9 server not restaring - “Permission denied” errors

  - by Xevi Pujol

  I had to restart my ColdFusion 9 server on CentOS because of a memory performance issue, but now the server won't restart again. When looking at cfserver.log I can see how there's "Permission denied" errors all along. The ColdFusion application folder (/opt/coldfusion9/) is owned by nobody:root, as that fixed a similar problem that we had a few weeks ago. Also, the last time this CF server was running correctly, the JRE user that was being used was nobody. Maybe CF is trying to restart using another user (presumably apache) and that creates permission issues? However, I'm not sure how to check this hypothesis. Where's the config file that tells CF what JRE user to utilize? If I can change that, I could try to specify nobody there. Any other ideas also welcome. UPDATE: The runtime user that Coldfusion will utilise is defined in /etc/init.d/coldfusion_9. I fixed the problem by being consistent with the users: I needed to revert the ownership of the folder /opt/coldfusion9/ back to apache:root, which matches the init file.

  Read the article

• hosts file seems to be ignored

  - by z4y4ts

  I have almost fresh Ubuntu desktop box. OS was installed two weeks ago and updated from karmic repositories. Last week I had no problems with DNS. But this week something had changed. I'm not sure what and when, and not sure whether I changed any configs. So now I have some really weird situation. According to logs name resolving should work normally. /etc/hosts 127.0.0.1 localhost test 127.0.1.1 desktop /etc/host.conf order hosts,bind multi on /etc/resolv.conf # Generated by NetworkManager search search servers obtained via DHCP nameserver 192.168.0.3 /etc/nsswitch.conf passwd: compat group: compat shadow: compat hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis But if fact it is not. user@test ~ping test PING localhost (127.0.0.1) 56(84) bytes of data. [skip] Pinging is ok. user@test ~host test test.mydomain.com has address xx.xxx.161.201 But pure I suspect that NetworkManager might cause this misbehavior, but don't know where to start to check it. Any thoughts, suggestions?

  Read the article

• I accidentally hijacked my localhost

  - by Zach L

  Opening localhost in the browser is pointing a local webpage (examplePage) after playing with some config files a while back, and I can't figure out how to restore the default behavior. Background: I have XAMPP installed on my Windows 7 machine, and a webpage at c:/xampp/htdocs/examplePage. A couple weeks ago, I was on a mission to get sites root-relative urls (/resource) to work, so I played around with a bunch of apache/conf files, including httpd.conf and httpd-vhosts.conf and also was messing with the Windows hosts file. I gave up at some point, didn't document exactly what I did, and have since probably forgotten some of what I did. Many of my changes stemmed from suggestions in this StackOverflow post What I've Tried I commented out my additions to the hosts file I turned off XAMPP (thus hopefully negating any apache config file effect) I reverted to my original DocumentRoot in httpd.conf anyway (xampp/htdocs) localhost still displays examplePage. Even with xampp turned on (my reverted DocmentRootisn't taking effect) Does anyone know what I may have done and how I can fix it? Update : Its been resolved, thank everyone so much in taskmanager, theres a couple instances of httpd.exe (Apache HTTP Server). I ended these, and opened XAMPP, restarting apache. all references to examplePage in my .conf files that I could find had been commented out or removed. I imagine that the old versions were still in effect for some reason, and manually ending the Apache processes fixed this. As a point of interest, Its still a mystery why those processes were running - I cannot reproduce that situation. I must've stumbled upon a XAMPP bug of some sort.

  Read the article

• really weird DNS problem in Ubuntu {after one month, seems like ISP problem}

  - by OmniWired

  Hello everyone. I been having this random dns problem, in Ubuntu 10.04 and in 10.10 it started about 2 weeks ago after (I believe) an update. Basically when I go to a website randomly I get that the website I'm visiting is not available ("Oops! Google Chrome could not connect to ..." & "This webpage is not available."). I tested with Chromium "7.0.515.0 (58587)" and Firefox minefield (4.0ish) and 3.6.9. I did these 4 things already: /etc/default/grub GRUB_CMDLINE_LINUX="ipv6.disable=1" and this: /etc/sysctl.conf net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1 *disabling Chromium DNS pre-fetching *using Google and OpenDNS servers as well as ISP DNS servers. But didn't improve, also no other computers in my network have the same problem. All computer wired to the same router. I'm a software engineer that run out of ideas, please help me. Thanks in advance. UPDATE: some programs (synaptic / firefox update/ vuze(azureus)) say connection refused for the error. Most of the time a second try will fix the "refusal". UPDATE2: I found out with Wireshark, that everytime I have this problem i've got this 192.168.0.10 8.8.8.8 ICMP Destination unreachable (Port unreachable) Confirmed an ISP error. ISP;Speedy Location: Argentina, Buenos Aires (capital Federal) Area.

  Read the article

• Gmail.com detect mail as spam, but the server is not on any BlackList

  - by Tomer W

  I have an issue with Google. (GMail to be exact) About 1 month ago, we had a security breach, and mail was relayed through our servers. we got listed in almost ALL Black-Lists :( we fixed the problem, and requested removal from Black-lists, which was granted easily. currently (over 3 weeks), we are not sending any spam anymore. furthermore, we got clear from all the Black-lists (MxToolBox Black-List Search Result) But, GMail still refuse to get Anything from the server, stating '550 Spam'. Following, Telnet attempt to send to gmail: 220 mx.google.com ESMTP g47si45436208eep.123 helo megatec.co.il 250 mx.google.com at your service mail from: <[email protected]> 250 2.1.0 OK g47si45436208eep.123 rcpt to: <[email protected]> 250 2.1.5 OK g47si45436208eep.123 Data 354 Go ahead g47si45436208eep.123 Test123 . 550-5.7.1 [62.219.123.33 11] Our system has detected that this message is 550-5.7.1 likely unsolicited mail. To reduce the amount of spam sent to Gmail, 550-5.7.1 this message has been blocked. Please visit 550-5.7.1 http://support.google.com/mail/bin/answer.py?hl=en&answer=188131 for 550 5.7.1 more information. g47si45436208eep.123 Connection to host lost. i tried filling the form @ Gmail - Report Delivery Problem i also tried reaching Google by phone, but the message was to go to the Link mentioned above. I Checked ReverseDNS and is ok... We dont have TLS, but that shouldn't be a problem, shouldn't it? Note: we are not a Bulk sender. Anyone has an idea? what can be blocking our IP? Anyone know whom can be contacted in order to resolve this BL listing?

  Read the article

• Should I upgrade to Symantec Endpoint Protection?

  - by Alex C.

  I'm the IT manager at an animal shelter in Upstate New York. We have a Windows network with about 50 desktops running Windows XP Pro. We used to use CA eTrust Antivirus, but that product didn't work too well (too many infections got through). About six months ago, we switched to using Symantec Antivirus Corporate Edition ver. 10.1.8.8000. If anything, the Symantec product is even worse. The last six weeks in particular have been very bad -- we've had about seven or eight PCs get hit with those malware infections that masquerade as antivirus software. In most of those cases, Symantec didn't even flag the malware at all. So... what gives with the Symantec Antivirus? As far as I can tell, it's installed correctly and downloading updated definitions nightly. I can upgrade to Symantec Endpoint Protection for $220 (we get non-profit pricing), but I don't want to do it if it's not going to be significantly better. Any advice? Should I switch to something else entirely? Thanks!

  Read the article

• Microsoft Arc Mouse OS X

  - by meepz

  I recently bought a new Mac Book Pro with Mountain Lion 10.8 on it. The only portable mouse I have is my Microsoft Arc Mouse. I wanted to use it with the laptop so I installed the IntelliPoint 8.2 for Mac from Microsofts website. According to their website, this driver is for OS X 10.4-10.7. Now I thought that wouldnt be too much of an issue but unfortunately for me, the driver installs fine and the mouse is detected but I get no movement and when I click the buttons nothing happens. I took the mouse with me on a business trip to EU and before I left I checked if the mouse worked with my desktop which is running Windows 7 and it worked without any hiccups. I'm not too sure where the OS differs from 10.7 to 10.8. I found an article online but it doesn't pertain to my mouse, although it could be of assistance. I have tried my version of their adjustment but I am not too knowledgable on low level hardware/software modifications so I may have done it wrong. heres the link: http://refluxions.wordpress.com/2008/08/18/mac-os-x-mouse-madnessfixed/ I get the following details when I check mouse info in the IntelliPoint preferences pane: The following Microsoft mouse devices are currently connected to your Macintosh driven by the Intellipoint software. Arc Mouse Vendor name: Microsoft Product name: Microsoft AE 2.4GHz Transceiver 5.0 Vendor ID: 045E Product ID: 074F Device version: 0140 if anyone has any suggestions on how to fix this it would be greatly appreciated! I love the mouse and im here in EU for another two weeks. Thanks

  Read the article

• NVidia Graphic Card troubleshooting

  - by Berry Langerak

  My dad has a HP pavilion laptop, which is over 6 years old. It contains an onboard graphic card, a NVidia GeForce 8400M GS. Since a week or two, he's getting BSOD in Windows Vista. Also, the screen was acting up; strange lines and figures keep creeping up, but only once in a while -- not always. Thinking that it might be the drivers he had recently upgraded, I decided to downgrade the driver, with no luck at all. I then continued to deinstall the driver, and reinstalling the current stable version, but alas, to no prevail. Windows kept crashing during the course of the last two weeks, and thinking it might be Windows breaking up, I decided to upgrade his Vista installation to Windows 7, as I've been hearing good things about it. Alas, even that didn't help, and it seems the strange lines and figures keep popping up. I've opened the laptop itself, thinking it might simply be overheating because of clogging in the vents, but that's not the case, it's clean as a whistle. Now for the actual question; does anyone have a decent flowchart on how to troubleshoot such issues? It might well be the videocard itself, as the strange lines and figures sometimes even appear during BIOS and POST, but I'm not sure.

  Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >