Search Results

Search found 34350 results on 1374 pages for 'style issue'.

Page 829/1374 | < Previous Page | 825 826 827 828 829 830 831 832 833 834 835 836  | Next Page >

• 11.10 liveCD black screen

  - by Shaun Killingbeck

  Attempting to install/try ubuntu 11.10 on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. I have caught a glimpse of some output to do with pulseaudio and [fail], but I can't imagine why that would cause a screen problem and the sound definitely works anyway.

  Read the article

• http server connectivity puzzle

  - by jpmartins

  I have been seeing some strange connection issue in the production environment. The setup has two IBM Http Server's (IHS) and a network IP load-balancer in front of them (round-robin). One instance the system is working fine, the next requests stop arriving at the IHS. Telnet directly to port 80 of the IHS is established sucessfully, but connection to the port 80 through the IP of the load-balancer fails! The puzzle comes next, the network admins say the load-balancer is working fine. When we finally reboot the IHS servers and request start flowing... The situation happened three times the last month and no obvious pattern was found. Any debug ideas?

  Read the article

• Cannot start eventlog service

  - by ANervousTwitch

  On a windows 2k8R2 DC box the eventlog service wont start. When i try to start the service the machine returns: "Windows could not start the Windows Event Log service on Local Computer. Error 13: The data is invalid." event viewer wont open either. obviously, i dont have an event log for this error. ive already tried clearing the event logs. that didnt do anything. the other DC isnt experiencing this issue.

  Read the article

• CentOS 5 - Unable to resolve addresses for NFS mounts during boot

  - by sagi

  I have a few servers running CentOS 5.3, and am trying to get 2 NFS mount-points to mount automatically on boot. I added 2 lines similar to the following to fstab: server1:/path1 /path1 nfs soft 0 0 server2:/path2 /path2 nfs soft 0 0 When I run 'mount -a' manually, the mount points are properly mounted as expected. However, when I reboot the machine, only /path2 is mounted. For /path1 I get the following error: mount: can't get address for server1 It obviously looks like a DNS issue, but the record is properly configured in all the DNS servers and is mounted properly if I re-try the mount after the reboot is completed. I could properly fix this by using IP address instead of hostnames in /etc/fstab or adding server1 to /etc/hosts but I would rather not do that. What might be the reason for failing to resolve this specific address during boot time? Why the problem is only with the 1st mount point and the 2nd is properly mounted despite having identical configuration?

  Read the article

• Using Query Classes With NHibernate

  - by Liam McLennan

  Even when using an ORM, such as NHibernate, the developer still has to decide how to perform queries. The simplest strategy is to get access to an ISession and directly perform a query whenever you need data. The problem is that doing so spreads query logic throughout the entire application – a clear violation of the Single Responsibility Principle. A more advanced strategy is to use Eric Evan’s Repository pattern, thus isolating all query logic within the repository classes. I prefer to use Query Classes. Every query needed by the application is represented by a query class, aka a specification. To perform a query I: Instantiate a new instance of the required query class, providing any data that it needs Pass the instantiated query class to an extension method on NHibernate’s ISession type. To query my database for all people over the age of sixteen looks like this: [Test] public void QueryBySpecification() { var canDriveSpecification = new PeopleOverAgeSpecification(16); var allPeopleOfDrivingAge = session.QueryBySpecification(canDriveSpecification); } To be able to query for people over a certain age I had to create a suitable query class: public class PeopleOverAgeSpecification : Specification<Person> { private readonly int age; public PeopleOverAgeSpecification(int age) { this.age = age; } public override IQueryable<Person> Reduce(IQueryable<Person> collection) { return collection.Where(person => person.Age > age); } public override IQueryable<Person> Sort(IQueryable<Person> collection) { return collection.OrderBy(person => person.Name); } } Finally, the extension method to add QueryBySpecification to ISession: public static class SessionExtensions { public static IEnumerable<T> QueryBySpecification<T>(this ISession session, Specification<T> specification) { return specification.Fetch( specification.Sort( specification.Reduce(session.Query<T>()) ) ); } } The inspiration for this style of data access came from Ayende’s post Do You Need a Framework?. I am sick of working through multiple layers of abstraction that don’t do anything. Have you ever seen code that required a service layer to call a method on a repository, that delegated to a common repository base class that wrapped and ORMs unit of work? I can achieve the same thing with NHibernate’s ISession and a single extension method. If you’re interested you can get the full Query Classes example source from Github.

  Read the article

• Why is my hosts file not working?

  - by elliot100

  I've been using the hosts file to for local website development, and it's recently stopped working. No entries other than localhost resolve. I've simplified to test, so it now contains only 127.0.0.1 localhost ::1 localhost 127.0.0.1 test.dev localhost responds to ping, test.dev does not. The file is called hosts with no extension It has no trailing spaces It's saved in C:\WINDOWS\System32\drivers\etc which matches the value of HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Oddly, despite UAC being on, I can edit, delete and save the file without admin permissions No proxy is being used, PC is not connected to network for testing Stopping the DNS Client service seemed to resolve the issue for a few minutes, test.dev briefly resolved but doesn't any more. Only firewall is Windows' Machine has been restarted. Is there anything else I should try?

  Read the article

• Effective handling of variables in non-object oriented programming

  - by srnka

  What is the best method to use and share variables between functions in non object-oriented program languages? Let's say that I use 10 parameters from DB, ID and 9 other values linked to it. I need to work with all 10 parameters in many functions. I can do it next ways: 1. call functions only with using ID and in every function get the other parameters from DB. Advantage: local variables are clear visible, there is only one input parameter to function Disadvantage: it's slow and there are the same rows for getting parameters in every function, which makes function longer and not so clear 2. call functions with all 10 parameters Advantage: working with local variables, clear function code Disadvantage: many input parameters, what is not nice 3. getting parameters as global variables once and using them everywhere Advantage - clearer code, shorter functions, faster processing Disadvantage - global variables - loosing control of them, possibility of unwanted overwriting (Especially when some functions should change their values) Maybe there is some another way how to implement this and make program cleaner and more effective. Can you say which way is the best for solving this issue?

  Read the article

• Terminal/Putty showing control characters (^M) after updating

  - by jaycee48

  I updated my system yesterday afternoon using the recommended updates from Update Manager. After it completed, I shutdown my system and went home for the day. I come in this morning and I am getting control characters displayed when using vi in both the standard terminal emulator, putty, and putty inside of my Windows virtual that I run with VirtualBox. I have made no other system changes and I cannot figure out how this occurred. It's as if every text file I have was created in DOS. I've searched the forums and I haven't found any answers. I am using xterm as my emulator and I checked with 3 of my coworkers and none of them are having this problem so we do not believe it is a server side issue. Especially since I've checked 3 different servers. There's nothing in my .profile other than PATH variables so I'm using the same terminal settings as everyone else. Some files are fine (I can open and read both /etc/environment and my .profile) but most of any kind of server generated log file is trash. Running cat or head on the same file displays the contents without the characters. Any ideas would be appreciated. Thanks.

  Read the article

• Excel 2010: Copy row conditionaly

  - by TimothyHeyden

  I've searched for a similar question here, but haven't been able to find something that answers my issue. I'm a mediocre user of Excel 2010 with no experience in macro's. I have a dataset where each row represents a data entry. Let's say each row can be for each of its values (the columns) the maximum or minimum of the entire dataset. How can I create a row at the top where the, for instance, maximum row is shown dynamicly? So when extra data is added to the bottom of the dataset, the new maximum (if applicable) is shown in that row at the top. Thank you in advance!

  Read the article

• Where to obtain openssl-devel for SunOS 5.10

  - by user35949

  So I am having an issue that I have seen other people have on many different systems. I have to build Subversion on a SunOS 5.10 box and have run into issues. I have the openssl source code installed and in the subversion-1.6.9 folder, I run the following: ./configure --with-ssl --with-libs=/opt/exp/lib/openssl/lib and receive the error: checking for library containing RSA_new... not found configure: error: could not find library containing RSA_new configure failed for neon I have also tried running the command without the "lib" on the end of the --with-libs path. I read online that I need the openssl-devel packages, but I have been unable to find them for SunOS 5.10, and they do not show up already installed on my system when running pkginfo. I have looked online including http://www.sunfreeware.com/ which I was told was a good SunOS software source. Any help you can provide would be welcomed. Thanks, Sean

  Read the article

• Setting up WAMP to run on a LAN

  - by Steve

  I've installed WAMP on a Windows 7 PC, and it is running fine locally, as localhost. I want PCs on the LAN to be able to view the local server. When they load my PC's IP address in their browser, they receive a "You don't have permission to access / on this server" error. I followed this guide, but the issue remains. To recap: I've added an inbound exception to Windows Firewall for port 80 for Private and Domain connections. I've edited Apache's httpd.conf to include: Listen 80 Listen 192.168.0.5:80 < Directory "c:/wamp/www/wordpress/" allow from all < /Directory I've edited httpd-vhosts.conf to include: < VirtualHost 192.168.0.5:80 DocumentRoot "C:/wamp/www/wordpress" < /VirtualHost Any ideas?

  Read the article

• ATI Radeon Triple Monitor Setup

  - by Zak

  I have a Dell XPS 8300, and its got an ATI Radeon HD6450 installed. When running Ubuntu 12.04 the triple monitors work flawlessly. I can change the default, turn them on/off etc ... The problem is Windows 7. It is behaving much like in this thread. I know the card supports three, as it WORKS PERFECTLY in the linux portion of my dual boot. Windows can "see" all three, but will only allow two. Is this a WIndows 7 / ATI compatibility issue, or is Windows 7 just stupid (rhetorical)? Had I not had a dual boot Linux box, I might have read the above thread and thought "damn, it just won't work". But I use three monitors every day on this card, so I know it works.... Just not with Windows.

  Read the article

• Sorting out mSSD acceleration on a Acer M3-581TG

  - by PhonicUK

  I recently purchased a Acer Timeline M3 Ultra, it ships with a 500GB HDD and a 20GB mSSD to use as a cache. First thing I did when I got it was format the drives and install a clean OS (on the HDD, the mSSD has nothing on it) - but now I can't figure out how everything needs to be configured in order to use the mSSD as a cache, it just looks like a standard storage drive. I've poked around in the BIOS and there is a SATA mode setting, but it only has one option (AHCI), most of the documentation I've seen on the subject says that the SATA controller needs to be in RAID mode otherwise 'Acceleration' isn't visible in the Intel SRT menu (which for me, it isn't) I've seen a few things that suggest I just need the correct partition layout, I tried this using fdisk from a Linux LiveCD but got nowhere. Any ideas? The laptop shipped with no recovery media so I'm marginally stumped. I don't have any issue with reformatting again if required.

  Read the article

• IP camera's multicast/RTSP conflicting with 2.4GHz Wi-Fi?

  - by jayson

  Here at our business we have a Netgear R7000 running DD-WRT. I have been slowly adding IP cameras which I run using Blue Iris software. The last camera I bought (which is NOT a wireless camera), when I plug it into the network I start having really bad connection issues on the 2.4GHz Wi-Fi network. The 5GHz works fine, just the 2.4GHz all of the sudden has trouble connecting, as if it's conflicting. I've tried playing with the camera settings, different IP addresses, HTTP ports, etc, and discovered it to be a conflict with multicast. When multicast is checked, the Wi-Fi has issues but my video streams via Blue Iris. When unchecked, Wi-Fi works fine but the video won't stream through Blue Iris. The problem is there are no settings in the camera to change the RTSP port, which is set to 34567. Does anyone know something that could fix this issue? It all seems very strange to me but maybe someone has an idea?

  Read the article

• USB Ports In Wrong Mode, How To Use usbmodeswitch?

  - by user86872

  I haven't had access to my USB ports as media devices for a couple days now. I've been reading and researching everything I can find but I can't find a good guide for usbmodeswtich or usbms that I can decipher. The USB's are fine for power, but won't support my android phone as a media device, which is killing me because I use adb everyday, and won't support my plug and play mouse any longer. Not sure what caused the switch, though I think it may be related to the suspend issue I've read about, but the solutions in those threads I read also didn't work. Below is my system information and details. System: Ubuntu 12.04, 64-bit, Dedicated Machine Machine: HP-Pavillion g6 notebook, AMD A6 Quad Core Processor USBs used for: Cooling dock, Android Debug Bridge, Wireless Mouse Attempted Mod Probe, udev restart, unable to attempt lsusb due to my own lack of knowledge. :) Last Attempt Readout: ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usbhid && sleep 5 && sudo modprobe usbhid ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo restart udev udev start/running, process 2624 ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0461:4de7 Primax Electronics, Ltd webcam Any help would be greatly appreciated!

  Read the article

• Prevent a program from creating files in a users home directory

  - by Matt Clark

  I run an engineering program for class, Quartus 2. The issue i am having is that every time i launch the program, it creates 10 bitmap files in my home directory. This is not so much of a problem, it just makes my OCD hurt :( I can delete them without affecting anything, but every time the program is launched it recreates them, and there is nothing in the program (that i have found) that stops these files from being created. Is there anything i can do to prevent this program, or any profram from creating files like this in my home folder?

  Read the article

• DataContractSerializer truncated string when used with MemoryStream,but works with StringWriter

  - by Michael Freidgeim

  We've used the following DataContractSerializeToXml method for a long time, but recently noticed, that it doesn't return full XML for a long object, but  truncated it and returns XML string with the length of  multiple-of-1024 , but the reminder is not included. internal static string DataContractSerializeToXml<T>(T obj) { string strXml = ""; Type type= obj.GetType();//typeof(T) DataContractSerializer serializer = new DataContractSerializer(type); System.IO.MemoryStream aMemStr = new System.IO.MemoryStream(); System.Xml.XmlTextWriter writer = new System.Xml.XmlTextWriter(aMemStr, null); serializer.WriteObject(writer, obj); strXml = System.Text.Encoding.UTF8.GetString(aMemStr.ToArray()); return strXml; }   I tried to debug and searched Google for similar problems, but didn't find explanation of the error. The most closed http://forums.codeguru.com/showthread.php?309479-MemoryStream-allocates-size-multiple-of-1024-( talking about incorrect length, but not about truncated string.fortunately replacing MemoryStream to StringWriter according to http://billrob.com/archive/2010/02/09/datacontractserializer-converting-objects-to-xml-string.aspxfixed the issue.   1: var serializer = new DataContractSerializer(tempData.GetType());   2: using (var backing = new System.IO.StringWriter())   3: using (var writer = new System.Xml.XmlTextWriter(backing))   4: {   5:     serializer.WriteObject(writer, tempData);   6:     data.XmlData = backing.ToString();   7: }v

  Read the article

• Perl script rendered in browser as code through symlink - fine when accessed directly

  - by John Dittmar

  I have a Rails 4 app that has some views that post to Perl cgi scripts. The perl scripts are accessed via a symbolic link to a folder called "cgi-bin". When I navigate to a perl script through the symbolic link they are rendered as text instead of executed (ie: localhost:3000/cgi-bin/test.cgi), however when I access them directly they execute without issue (ie. localhost/path/to/cgi-bin/test.cgi). I am using apache2 on os x. In the directory localhost/path/to/ I have an .htaccess file that contains the following: # General Apache options AddHandler fastcgi-script .fcgi AddHandler cgi-script .cgi Options +FollowSymLinks +ExecCGI I have the exact same lines in the .htaccess file that I have in localhost:3000/ I have also uncommented the AllowOverride all in httpd.conf. The are no errors in apache's error log. When I access the direct link to test.cgi a new line is appended to apache's access log, when I access the script through the symbolic link (and it is rendered as text), there is no line appended to the access log. Any idea why this error occurs? This setup worked fine in a previous version of rails of OS X, but recently I upgraded to Mavericks and figured I should update the Rails application to v4.0 as well.

  Read the article

• Citrix Error: Your user profile was not loaded correctly

  - by George

  We get this error from out citrix server: Your user profile was not loaded correctly! You have been logged on with a temporary profile. Changes you make to this profile will be lost when you log off. Please see the event log for details or contact your administrator. I am well aware there is a workaround by Citrix, that can be found here, but that doesn't permanently fix our issue. It seems to come back. Any idea why that happens? Any suggestions on how to fix it? Citrix version is 4.5 running on Windows 2003 x32 EDIT 14.IX.2012 @ 16.03 CT I am sorry, let me clarify, it happens to some users, not all and not all the time.

  Read the article

• Postfix, saslauthd, mysql, smtp authentication problems

  - by italiansoda

  Trying to get authentication on my mail server (ubuntu 10.04) running but am having trouble. I have a server with postfix for smtp setup, imap server with courier setup. My postfix authentication is using cyrus (I haven't tried dovecot really) saslauth. The user name and password is stored in a MySql database. Logging in with imap-ssl works on a remote client (thunderbird), and I can read my mail. I can't get the SMTP side working, and have focused the issue down to saslauth. Testing with testsaslauthd -u 'username' -p 'passowrd' -s smtp returns connect() : Permission denied the password in the database is encrypted and I guess this testsaslauthd will take a plain text password and encrypt it. Looking for someone to walk me through getting this working. Im new to the mail server, and have never got one fully working. Thanks. Ask me which log files I should look at/post, which tests to run, permissions to check.

  Read the article

• once VPNed into pfSense, unable to hit the public URLs of my websites - they are routed to the pfSense box

  - by Sean

  I have a pfSense box setup as the firewall/router/VPN appliance at my colo. Once I VPN into the colo (either pptp or openvpn, pptp preferred due to multiple clients and ease of configuration), I am able to hit all my servers by their private 10.10.10.x ip and am able to browse the public internet without issue. When I try and hit the URL of a domain hosted by one of my servers, I am prompted for credentials. If I login using the pfSense credentials, I'm connected to pfSense as if I'd used it's internal IP. If I hack my hosts file to point url - server private IP it works fine, but this is obviously not a good solution. To recap: not connected to VPN - www.myurl.com works connected to VPN - www.myurl.com never makes it to the correct server, but is sent only to the pfSense box I'm sure it's something small that I've missed in the pfSense config.

  Read the article

• Windows 7 on 1st Gen Macbook Pro (Q4-2008), power management problems.

  - by typemismatch

  I have the first generation macbook pro, purchased Q4 2008. I've been trying to run Windows 7 and can get it all installed great with the BootCamp 3.1 64 bit drivers however ... power management isn't great. The screen and keyboard don't automatically dim - the laptop gets too hot. I noticed on some newer macbook pros that windows 7 works perfectly and the above doesn't happen. Does anyone know if there really is a hardware issue with this 1st gen or is there some firmware update I can use to fix this? Thanks!

  Read the article

• How do I clone an Ubuntu server under VMWare

  - by dave

  I have a Ubuntu 12.04 server running under VMWare. As best as I can tell, the VMWare vmbk file has been corrupted. The server is operating normally, but this is preventing backups (using Veeam). To remedy this, I'd like to create a duplicate VM without the corruption issue. However, with the corrupted file VMWare can't help me, eg. create a simple clone. I can create a new VM. How do I clone the configuration / data from my problematic server into the new one? Updated: just to clarify: I realise I can't use the VMWare clone tools. I will manually create a new VM (with a base O/S if necessary). How to I replicate the O/S and data from one VM into another?

  Read the article

• Warning in Apache log: Cannot get media type from 'x-mapp-php5'

  - by IronGoofy

  I have no idea what is causing this issue, but it seems to be related to the displayed file (just a simple index.php to print phpinfo) being in an aliased directory. Any suggestions what I can do to avoid the warning? Here's an excerpt from my httpd.conf: <Directory "<dir with broken php>"> Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> Alias /smartersoftware/ "<broken dir>" <FilesMatch \.php$> SetHandler application/x-httpd-php </FilesMatch> The last three lines were required to make php work at all (which I found a bit strange, and it may or may not be related to my problem). Adding a AddType application/x-mapp-php5 .php didn't change anything.

  Read the article

• Lenovo Y460 Intel Driver Secondary Display Flickering

  - by ultimatebuster

  This is a part of the massive dump of problems I'm encountering with my Lenovo Y460 and Ubuntu. Problem: ATI PowerXpress doesn't really work. Doesn't work as I have to use the open source driver with hacks. Turned off ATI card at boot Details on how I accomplished that: http://ubuntuforums.org/showthread.php?p=10955831#post10955831 Installing the ATI drivers results in a failure of the intel drivers to work with Ubuntu Class (all animations have to turned off). Anyway to fix this problem to allow switchable graphics to work? The problem above has been fixed by FGLRX (Catalyst 11.6) is it compatible with kernel 2.6.39? However, there's another issue. If I connect my secondary monitor (VGA 17'') while using the Intel driver, I would not be able to use that screen as there's flickering and tearing, making the screen blurry and usable. Here's the fglrxinfo: $ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ironlake Mobile GEM 20100330 DEVELOPMENT OpenGL version string: 1.4 (2.1 Mesa 7.10.2) Any fixes for that? Potential related bug report on launchpad: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/750259 However I can't confirm because the video showing that is much more dramatic than what I have, mine are tiny flickering that won't be captured by video cameras as I've tried, but enough to make it blurry for humans.

  Read the article

< Previous Page | 825 826 827 828 829 830 831 832 833 834 835 836  | Next Page >