Search Results

Search found 9667 results on 387 pages for 'hardware monitoring'.

Page 83/387 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

  • LSI 9260-8i w/ 6 256gb SSDs - RAID 5, 6, 10, or bad idea overall?

    - by Michael Pearson
    We're provisioning a new production server for our reasonably busy website. Our choice of host have available a 6 drive configuration with a LSI 9260-8i card. My initial thought was to fill all six bays with SSDs (Intel 520 256gb) and set them up in RAID. Good, bad, or terrible idea? Can the card handle it? Should we be using RAID 5, 6 or 10? This would be the first time the provider have filled all six slots for this rackmount with SSDs, so they're a bit hesitant. I'm wondering if somebody else with this card has done something similar in a production environment. We do about 43gb of writes per day and currently use about 300gb of storage. The server acts as webserver, database, and image store for approx 1 million files. The plan is to underprovision the SSDs by approximately 10% to 20% to increase their overall lifespan & performance. The fallback option is 2x480gb SSDs in RAID 1 and another 2x1TB HDDs in RAID 1. The motivation behind this is that the server rental cost difference between 2xSSDs and 6xSSDs is minimal (compared to the overall cost of the rental). We do not have any special high-IOPs requirements. However, if the configuration is known to work, I don't see a good reason to not use it and not have to worry about having separate 'fast and small' and 'slow and large' disks.

    Read the article

  • Best DVD Burner?

    - by davr
    I've got a fairly old generic DVD burner that doesn't support dual layer, and I'm looking to upgrade since they seem so cheap these days. Does it matter what model I get, or is it such that I can just buy whatever happens to be on sale today? Are there advantages to a certain brand over another? Basically I just want something that's fast, cheap, and produces good quality burns. Any advice would be helpful.

    Read the article

  • CPU Cooling with Heatsinks

    - by Jason Tzen
    I've constructed a server that uses 2 Xeon E5-2620 CPUs and per Intel's recommendation I'm in the process of ordering heatsinks for each and I'm slightly concerned about thermal management. The case I'm using is well ventilated (the Coolermaster Cosmos II) but I have a few concerns regarding the adequacy of the heatsinks recommended by the MB manufacturer (Supermicro CPU HeatSink SNK-P0048PS). As you can see these heatsinks come without a fan and I'm wondering if they can keep the Xeons within their normal temperature range... Due to the low volume of literature on the topic I wasn't able to find anything conclusive.

    Read the article

  • Configure EasyBox (Vodafone) with DynDNS

    - by furtelwart
    How can I configure an EasyBox A601 WLAN (from Arcor resp. Vodafone) to send the IP always to DynDNS? I entered the following: Dynamic DNS [X] Diensteanbieter (DynDNS.org) Domänenname mysupersecrethost.dyndns.org (as specified in "My Host" section Konto / E-mail myaccountname Passwort mysupersecretpassword The update does not work anymore, so that my IP is not correct. The firmware is the newest available: Firmware Version: 10.02.006 (01.12.2008-11:11:59) Thanks for any hints!

    Read the article

  • Why did my power supply fry itself?

    - by ULTRA_POROV
    I am in europe. There was a switch on my psu that could switch the voltage between 230v and 130v (not 100% sure). In europe we use 230. I switched the psu to 110 and turned it on. Several sparks and a power failiure resulted, the psu was fried. Can someone explain why this happened. I was assuming that because the system was using 230 and the psu only draws 130 it would be safe cause it's less. I guess i was wrong. Can someone explain me the physics behind this.

    Read the article

  • Can a virus corrupt a hard disk?

    - by sundar
    Shorter version: Hard disk corrupt, vendor claims warranty does not apply since it was "due to a virus" and "problems due to software are not covered under the warranty". Longer version: My Dell laptop recently refused to boot, and all attempts to 'repair' the Vista installation using the provided installation CD failed. I called up Dell support, and a representative took the laptop and after a day said the hard disk is corrupt. When I tried to ask for a replacement under the warranty, an official replied that the corruption was due to a virus, and "problems due to software are not covered under the warranty". Now, I get a doubt that he's trying to avoid having to provide it under the warranty. Is it possible for a hard disk to get corrupt due to a virus? If yes, is there any way we can detect it was due to a virus (as he claims to have detected)?

    Read the article

  • Monitor for HD video editing

    - by Kato
    I have been researching for days and nights on a good monitor to buy for a Mac Pro with an ATI Radeon 2600 XT (256mb). It will be used extensively for HD video editing (1080p) and photo editing, and likely also digital/3D animation next year(a lot of FCP + CS4). I am a student, so money is a little bit of an issue, but I want something that I'll be able to use semi-professionally after I'm done school, and am willing to finance something if it is worth the cost. I'm HOPING for something under $1000 though. The IPS Ultrasharps from Dell seem to be getting good reviews from other video editors. Accurate colour correction is a concern for me (hopefully something that covers Adobe spectrum), as well as a decent response time, HD resolutions, and DVI port. Also something with good gradient/definition in black areas, as this is difficult for editing on most LCDs. 1X1 pixel, brightness, good DVD playback etc. Hopefully this is not impossible to find for under $2000!

    Read the article

  • Do I need to rebuild the array after putting in a new hot spare?

    - by Shade34321
    So my experience with RAID is minimal. So I figured I'd come and ask here. We have a 16 drive RAID system that have 15 drives in RAID 5 with a hot spare left over. Recently one of the drives in the RAID was giving errors so I cloned it over to the hot spare and put a new drive in it's spot. I made the new drive the hot spare as I was told. I was told to rebuild the array after putting in the new drive as a hot spare so I tried and wasn't able to. So my question is do I need to rebuild it and if so why did it tell me I couldn't. Thanks! UPDATE: So I've come back up to work and looked at the RAID and it pulled in the hot spare into the raid and kicked out another drive.

    Read the article

  • Should I install Windows 7 on a 3 years old PC?

    - by Jitendra vyas
    This is my PC configuration, Should I upgrade my Windows XP to Windows 7. Currently I'm using Windows XP SP3 32 bit. Now will I get same performance or better performance or bad performance if I install Windows 7 on this system? Or would sticking with XP be better? Memory (RAM): 1472 MB DDR RAM (not DDR 2) CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1398.7 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Network Adapters: Bluetooth Device (Personal Area Network) | WAN (PPP/SLIP) Interface Hard Disks: 300 GB SATA HDD Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA :

    Read the article

  • Software RAID 10 on Linux

    - by vpetersson
    For a long time, I've been thinking about switching to RAID 10 on a few servers. Now that Ubuntu 10.04 LTS is live, it's time for an upgrade. The servers I'm using are HP Proliant ML115 (very good value). It has four internal 3.5" slots. I'm currently using one drive for the system and a RAID5 array (software) for the remaining three disks. The problem is that this creates a single-point-of-failure on the boot drive. Hence I'd like to switch to a RAID10 array, as it would give me both better I/O performance and more reliability. The problem is only that good controller cards that supports RAID10 (such as 3Ware) cost almost as much as the server itself. Moreover software-RAID10 does not seem to work very well with Grub. What is your advice? Should I just keep running RAID5? Have anyone been able to successfully install a software RAID10 without boot issues?

    Read the article

  • Idle hard disk makes noise.

    - by ULTRA_POROV
    Like a fan or something. I checked it. I stopped all fans (cpu, video, psu) and the noise was still there. I read online that it might be a motor or something. I have put a great deal of effort making my pc quiet. Installed a quiet psu and cpu fan, reduced the fan speed of my video card, bought a ssd... But my drive for data makes this noise. I would never have expected that. Do all hard disks make this kind of noise? I guess most people won't notice it because of the other fans they have in the system, I however can hear it quite clearly because all my other fans are almost silent. So should i get a new one or should i just live with it, considering that i might end up with a drive that also makes this noise.

    Read the article

  • Mini-ITX board for AM3 Athlon X4 600e processor.

    - by Kamil Zadora
    Hello, I am planning to build a PC to control a robotic platform that I am building (about 50% complete). I need more power than ATOM platform could bring, as the robot will need to do on the fly image processing to work as intended. I was considering using Athlon X4 600e as it is rated 45W Maximum output. Probably underclocked it would go lower than 30-35W. I do not I'am at very long battery life, but the 17Ah, 12V battery should keep it running for few hours. My problem is: motherboard. I am space limited so I am looking for a nice mini-itx AM3 motherboard to match the processor. It is hard to find many tests about power usage of the motherboards itself (for example, when using the same processor on different motherboards, test are usualy done in the opposite matter). Could you provide any motherboard examples or suggest what chipset to look for? Thank you in advance.

    Read the article

  • How small is too small (of laptop for a programmer)

    - by defn
    Im thinking of replacing my HP Pavilion dv5-1004nr with Acer Aspire AS5738-6444, I'm a CS student... so im torn between screen size (liking the 15in and decent gpu.. but it weight nearly 8 pounds and battery can barely last 2 hours in power saver mode) and wanting something portable to carry to classes/take notes ect (3 pounds and up to 8 hour battery life of the acer) what would you guys suggest? acer any good? i love my hp keyboard.. (or have links to other good laptops, im aiming for 600$ range?)

    Read the article

  • Raid-5 Performance per spindle scaling

    - by Bill N.
    So I am stuck in a corner, I have a storage project that is limited to 24 spindles, and requires heavy random Write (the corresponding read side is purely sequential). Needs every bit of space on my Drives, ~13TB total in a n-1 raid-5, and has to go fast, over 2GB/s sort of fast. The obvious answer is to use a Stripe/Concat (Raid-0/1), or better yet a raid-10 in place of the raid-5, but that is disallowed for reasons beyond my control. So I am here asking for help in getting a sub optimal configuration to be as good as it can be. The array built on direct attached SAS-2 10K rpm drives, backed by a ARECA 18xx series controller with 4GB of cache. 64k array stripes and an 4K stripe aligned XFS File system, with 24 Allocation groups (to avoid some of the penalty for being raid 5). The heart of my question is this: In the same setup with 6 spindles/AG's I see a near disk limited performance on the write, ~100MB/s per spindle, at 12 spindles I see that drop to ~80MB/s and at 24 ~60MB/s. I would expect that with a distributed parity and matched AG's, the performance should scale with the # of spindles, or be worse at small spindle counts, but this array is doing the opposite. What am I missing ? Should Raid-5 performance scale with # of spindles ? Many thanks for your answers and any ideas, input, or guidance. --Bill Edit: Improving RAID performance The other relevant thread I was able to find, discusses some of the same issues in the answers, though it still leaves me with out an answer on the performance scaling.

    Read the article

  • Hard drive failure during a move

    - by user52141
    So, odd situation here... I shipped a computer via UPS. The computer was well protected, wrapped in multiple layers of padding and tightly packed to minimize any chance of damage. The package arrived in great condition, no damage to the box at all - it looks like it was handled with utmost care. (And given it was shipped 2nd day express and cost $200 to ship, it had better have been) However, upon unpacking it and turning it on... suddenly the computer is telling us there is no boot device. I've checked everything I can think of and everything points to complete and utter hard drive failure. So - what on earth could cause hard drive failure during shipping?

    Read the article

  • Replacing an ATA-100 hard drive

    - by Pieter
    I was instructed to replace the hard drive in an old laptop, a Dell Latitude D505. I'm suspecting that there was a head crash when someone moved the laptop while it was turned on. In the specifications, I found this about the hard drive: 30GB ATA-100; (4200RPM); 40GB ATA-100 (5400RPM); 60GB ATA-100 (4200RPM) *Optional 40GB (5400) 2nd HDD Module for media bay I'm familiar with SATA and IDE, but ATA-100 doesn't ring a bell. What do I have to take into account when I go look for a replacement hard drive?

    Read the article

  • How to safely remove a device blocked by the System process with a handle on \$Extend\$RmMetadata\$Txf

    - by Heinzi
    I have an external HDD which I would like to "safely remove". Unfortunately, my system (Windows 7 x64) complains that "the device is currently in use". Using Process Explorer I discovered which process is holding a handle on the device: Obviously, System is not a process that I can just kill and be done with it. I've done a bit of research and this seems to be a common problem, but no solution has been found so far (except for rebooting the machine, which I'd like to avoid if possible). Is there any solution to this problem that I've missed?

    Read the article

  • WiFi N Gigabit Router

    - by SLaks
    I'm looking for a WiFi N Gigabit router. I'll be using an iPod Touch 2G and a 2009 17" MacBook Pro over WiFi, and I need at least 4 gigabit ethernet ports plus a WAN port. What do people recommend? In particular, are there any compatibility issues between different WiFi N drafts that would limit the speed of the MacBook, and is it worth getting dual-band?

    Read the article

  • Core i7 920 vs 870

    - by JL
    I am not sure which is better. Surely with processors you would think the 920 would be a higher version because 920 870. What's bothering me is that the 870 seems to have a higher clock speed, so which one is the better processor?

    Read the article

  • How to tilt a rigid LCD Wall Mount?

    - by benoror
    I recently bought a Wall Mount for my 24" LCD TV, it is just a few feet above my workspace desktop, but I need it to be a little bit tilted because I'm quite near the screen. I can't afford another wall-mount device, any ideas ? Description of the mount: http://bit.ly/cfyrEG

    Read the article

  • Fixing sticky keys without removing the keys?

    - by Earlz
    Hello, we had an E-Machine netbook brought in today that has sticky keys. (don't ask me why we said we'd fix it) Well, I've looked at a few howtos for fixing it, but they all require removing the keys. When I tried to remove the keys, I got the key to like a 45 degree angle and it still didn't budge, so I'm pretty sure the keys are non-removable. Is it common for places to even be able to find a replacement keyboard for netbooks and is there a way to fix sticky keys without removing the keys?

    Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >