Search Results

Search found 2281 results on 92 pages for 'kim guest'.

Page 83/92 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

• VMware Workstation Bridged Network Host UnReachable

  - by user2097818

  VMware Workstation 7 on Win7-64 (Home Premium). I have confirmed this on any guest running on this machine (from winxp to debian). I am using a bridged network connection for my guests (Automatic on VMnet0). All of the network configuration is done with DHCP (including on the host). Problem What I can not do: Ping my host machine from inside any VM. (either shows me "Destination Host Unreachable" or will just timeout) What I CAN do right after power up, with no problems at all. I can connect to the internet from inside the VM I can ping my router from inside the VM I can ping other machines on my network from inside the VM Other machines can ping the VM Other machines can ping the host My host machine can ping the VM (this one is important. read further) Details So I have my router assigned as 192.168.2.1/255.255.255.0, and the router provides the DHCP service (and it seems to be doing so successfully). There are no IP conflicts on the network that I am aware of. All Gateways and Subnet masks are appropriate and matching. My entire workshop is on one single subnet, with one single DHCP server and gateway. There is one method in which I can ping successfully, but it requires an active connection initiated from the host (I start pinging from host to VM). During the period of the active connection, I can successfully ping from VM to host, using explicit IP address. As soon as the host connection is closed, the VM ping starts hanging with the same old messages. My Thoughts This really feels like a firewall problem, but I have turned off all firewalls on host and VM, powered down the network, powered back up, and the problem still persists. And if it was firewall, why would only the IP address associated with bridged VM networks be blocked. I feel as though my host operating system (Win7) is somehow configured incorrectly, or, VMware Workstation is configured incorrectly from the host side. Although I have done my best to put everything in default, I feel like I am missing something silly.

  Read the article

• How to turn off Windows Azure's "This copy of Windows is not genuine" message?

  - by Sid

  Is there any setting/configuration item to avoid Windows Azure from printing that error on the screen or detecting it? I've put a screenshot below that shows the message when you RDP into the web role. My web role runs on Windows Azure Guest OS 1.17 (variant of Windows Server 2008 SP2) Background: I was explaining our architecture to some outside engineers (NDA'd and all) and had to demystify the webrole as they were unfamiliar with Azure. I RDP'd into the VMs running the Web Role when one of their engineers gasped "are you guys running pirated copies of Windows in the cloud?" I also noticed that within the RDP screen, the Azure machines had "This copy of Windows is not genuine" on the bottom left corner. Now obviously, Microsoft is running their own OS in their own datacenter with no influence from me. So no 'piracy' here, despite that obvious warning. However, they seemed so distracted by this ("how can it be? really? hmmm?") that we wasted more time talking about it than the actual matter at work. Like I said, they have little exposure to Azure but have value add elsewhere. I want to get rid of this so I don't have to explain this in the future. PS Microsoft: If you're going to modify Windows Server <XYZ> into Windows Azure <A.B> , you should also modify the code that verifies product integrity.

  Read the article

• Libvirt/KVM in NAT: can't access from host (and can't forward)

  - by SharkWipf

  I'm trying to set up a port forward to a KVM guest, managed through Libvirt on Debian 6. The VM is running in NAT, through the "default" network. This all runs fine, the VM has full internet connection. However, the host cannot reach the vm internally. Neither ping, nc nor nmap on the NAT network give any signs of the VM. Due to this, the normal iptables forwarding rules don't work either. $ cat /etc/debian_version 6.0.5 $ libvirtd --version libvirtd (libvirt) 0.9.11.3 $ kvm --version QEMU emulator version 1.0 (qemu-kvm-1.0+dfsg-11, Debian), Copyright (c) 2003-2008 Fabrice Bellard ifconfig: eth0 Link encap:Ethernet HWaddr 54:04:a6:f1:6f:10 inet addr:x.x.x.x Bcast:x.x.x.x Mask:255.255.255.x inet6 addr: fe80::5604:a6ff:fef1:6f10/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:118902 errors:0 dropped:0 overruns:0 frame:0 TX packets:142357 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13247173 (12.6 MiB) TX bytes:95163190 (90.7 MiB) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:230646 errors:0 dropped:0 overruns:0 frame:0 TX packets:230646 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204577107 (195.0 MiB) TX bytes:204577107 (195.0 MiB) virbr0 Link encap:Ethernet HWaddr fe:54:00:e2:d2:60 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:961 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:666759 (651.1 KiB) TX bytes:400701 (391.3 KiB) vnet0 Link encap:Ethernet HWaddr fe:54:00:e2:d2:60 inet6 addr: fe80::fc54:ff:fee2:d260/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:125687 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:739803 (722.4 KiB) TX bytes:6886609 (6.5 MiB)

  Read the article

• Ubuntu inside VirtualBox is slow

  - by Kapsh

  I am running an Ubuntu instance on VirtualBox inside XP. Here are the details: Host: Windows XP Pro Guest: Ubuntu 8.10 Total RAM: 3GB RAM For VM: 1GB Total Video Memory: 128MB Video Memory for VM: 40MB Hard Drive: 200GB Hard Drive for VM: 30GB Processor: 2.80GHz Core Duo The problem is that whenever I am inside the virtual machine, things seem so much slower in general. For example Firefox, Eclipse take longer to load, dragging windows show a lag etc. I have tried running Ubuntu before (not inside a VM) and it seemed fantastically fast. So I am disappointed to have to deal with this situation. But I need access to the XP partition without having to reboot and hence the attempt. I am surprised with the perceived slowness since the whole world seems to be doing virtualization and I cannot imagine everyone works on slow systems knowingly. My question is - is there something I should be doing to boost performance? Am I doing something wrong? This is my home machine and I am not sure if this is the right forum to ask. Thanks.

  Read the article

• Website hosted on my virtualbox web server not displaying images or applying css when viewed through phone

  - by WebweaverD

  I would really appreciate it if someone could help me. Please let me know if you need more info in the comments. My Set Up I have a windows 7 pc. On it I run a virtual box VM with a ubuntu 12 guest os and LAMP setup. I share files between the two machines using samba from linux to windows and using windows file sharing (Workgroup) the other way round. The vm is set up with a bridged network adapter and can happily serve web pages to my host machine. I use DHCP reservations on my home wireless router/modem to reserve an ip for the vm and give it a sitename.dev in my windows host file so I can access it at sitename.dev through the browser. The Problem So far so good but I have a dev project which needs a lot of mobile template development, now obviously I can use a browser plugin to simulate a mobile device but I would like to be able to see the real thing easily on my phone during development. So ideally I would like a similar setup on my iphone to my windows setup Now I'm not great on networking and dont have much experience with web server set up. So when I typed the ip of my virtual box into my iphone i wasnt expecting to see anything. I was pleasantly surprised when my site loaded up. The javascript even seems to be running but the images and css are not happening. My Question 1) What is happening here, is it something to do with the bridged set up on the vm network? 2)How do I make the sites load properly through my phone Notes I've also tried another phone. The same sites viewed on live servers work fine.

  Read the article

• Not able to connect to port different than 22 - OpenVPN

  - by t8h7gu

  I have OpenVPN network with 5 clients. Computer with Arch Linux which hosts OpenVPN server, It also hosts virtual machine with Computer with CentOS which is also connnected to OpenVPN subnet. Windows 8 which hosts virtual machine with CentOS. Both of them are connected to OpenVPN. Last one machine is virtual machine with CentOS which is hosted by computer with Ubuntu 14( which is not connected to OpenVPN. All machines in OpenVPN subnet are bolded. All phisical computers are in different networks. The problem is that when I use nmap to scan Windows and it's guest virtual machine it's saids that host seems down. When I force namp to scan specific port it shows filtered state: nmap -Pn -p 50010 n3 Starting Nmap 6.46 ( http://nmap.org ) at 2014-06-07 19:49 CEST Nmap scan report for n3 (10.8.0.3) Host is up (0.11s latency). rDNS record for 10.8.0.3: node3.com PORT STATE SERVICE 50010/tcp filtered unknown Telnet also cannot connect to this port telnet n3 50010 Trying 10.8.0.3... telnet: Unable to connect to remote host: No route to host But ss on this host show's proper state of this port ss -anp | grep 50010 LISTEN 0 50 10.8.0.3:50010 *:* users:(("java",12310,271)) What might be possible reason of that and how to fix it? EDIT I've found that I am able to connect via telnet to ssh port: telnet n3 22 Trying 10.8.0.3... Connected to n3. Escape character is '^]'. SSH-2.0-OpenSSH_5.3 So it seems that it's not problem with Windows firewall. But I have no idea what it might be. Also nmap result for first thousand ports: nmap -Pn -p 1-1000 n3 Starting Nmap 6.46 ( http://nmap.org ) at 2014-06-07 20:08 CEST Nmap scan report for n3 (10.8.0.3) Host is up (0.49s latency). rDNS record for 10.8.0.3: node3.com Not shown: 999 filtered ports PORT STATE SERVICE 22/tcp open ssh Nmap done: 1 IP address (1 host up) scanned in 77.87 seconds

  Read the article

• Hyper-V vss-writer not making current copies [migrated]

  - by Martinnj

  I'm using diskshadow to backup live Hyper-V machines on a Windows 2008 server. The backup consists of 3 scripts, the first will create the shadow copies and expose them, the second uses robocopy to copy them to a remote location and the third unexposes the shadow copies again. The first script – the one that runs correctly but fails to do what it's supposed to: # DiskShadow script file to backup VM from a Hyper-V host # First, delete any shadow copies of the drives. System Drives needs to be included. Delete Shadows volume C: Delete Shadows volume D: Delete Shadows volume E: #Ensure that shadow copies will persist after DiskShadow has run set context persistent # make sure the path already exists set verbose on begin backup add volume D: alias VirtualDisk add volume C: alias SystemDrive # verify the "Microsoft Hyper-V VSS Writer" writer will be included in the snapshot # NOTE: The writer GUID is exclusive for this install/machine, must be changed on other machines! writer verify {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} create end backup # Backup is exposed as drive X: make sure your drive letter X is not in use Expose %VirtualDisk% X: Exit The next is just a robocopy and then an unexpose. Now, when I run the above script, I get no errors from it, except that the "BITS" writer has been excluded because none of its components are included. That's okay because I really only need the Hyper-V writer. Also I double checked the GUID for the writer, it's correct. During the time when the Hyper-V writer becomes active, 2 things will happen on the guest machines: The Debian/Linux machine will go to a saved state and restore when done, all fine. The Windows guests will "creating vss snapshop-sets" or something similar. Then X: gets exposed and I can copy the .vhd files over. The problem is, for some reason, the VHD files I get over seems to be old copies, they miss files, users and updates that are on the actual machines. I also tried putting the machines in a saved sate manually, didn't change the outcome. I hope someone here has an idea of how to solve this.

  Read the article

• How to find the IP Address of a vm running on VMware (or other methods of using VM)

  - by sixtyfootersdude

  I am running VMware Workstation on a Linux box. When I power on a centOS (Linux) virtual machine I cannot get mouse or keyboard control of the machine. I suspect that it has something to do with the error message: You do not have VMware Tools installed in this guest. Chose "Install VMware Tools" from the VM menu. If I click on that menu option it inserts a virtual cd with drivers etc. This does not help me since I don't have keyboard or mouse control over the machine. I was thinking that if I could figure out the IP address or hostname I could use any number of protocols to get into the machine (SSH comes to mind). How can I get the IP address or hostname of this machine? Note: I did not create this machine. A coworker created it who is no longer with the company. Would save me a lot of time if I could get into the machine. I have login credentials so that won't be a problem.

  Read the article

• Samba/Winbind issues joing to Active directory domain

  - by Frap

  I'm currently in the process of setting up winbind/samba and getting a few issues. I can test connectivity with wbinfo fine: [root@buildmirror ~]# wbinfo -u hostname username administrator guest krbtgt username [root@buildmirror ~]# wbinfo -a username%password plaintext password authentication succeeded challenge/response password authentication succeeded however when I do a getent I don't get any AD accounts returned [root@buildmirror ~]# getent passwd root:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown halt:x:7:0:halt:/sbin:/sbin/halt mail:x:8:12:mail:/var/spool/mail:/sbin/nologin uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin operator:x:11:0:operator:/root:/sbin/nologin puppet:x:52:52:Puppet:/var/lib/puppet:/sbin/nologin my nsswitch looks like this: passwd: files winbind shadow: files winbind group: files winbind #hosts: db files nisplus nis dns hosts: files dns and I'm definitely joined to the domain: [root@buildmirror ~]# net ads info LDAP server: 192.168.4.4 LDAP server name: pdc.domain.local Realm: domain.local Bind Path: dc=DOMAIN,dc=LOCAL LDAP port: 389 Server time: Sun, 05 Aug 2012 17:11:27 BST KDC server: 192.168.4.4 Server time offset: -1 So what am I missing?

  Read the article

• extra managed+unmanaged switches @ home/office -- best (mis)usage scenario? what would you do?

  - by locuse

  up front -- definitely NOT a mission-critical kind of question. after a 'spring cleaning' of my local office, i've ended up with two 'spare' GigE switches at my home/office -- one managed, capable of VLANs, QoS, etc, and the other unmanaged. i've got more ports than i need. in fact EACH switch has more total ports than i need. but, since i can't have these just sitting around not doing SOMETHING ... ;-) i'm interested in ideas for best combined use of these switches. my local topology is simple: [ net ] -- [ adsl2 modem ] -- [linux firewall/router/DNS ] _______________| | [ some arrangement of the 2 GigE switches ] | ( ... stuff on the lan ... ) [WAP1] [voip ATA] [printer] [desktop1] [mail server] [Xen server [desktop2] ( mostly dev, [desktop3] + file server [desktop4] + media server)] the MailServer is a production mail server the XenServer serves some low vol to the 'net; the MediaServer guest serves ONLY to the LAN is there, e.g., any performance value in segmenting off any of the LAN using the managed switch (VLAN? QoS tagging? something?), feeding the rest into the connected unmanaged switch? or should i simply use one of the switches & be done with it, and use the other for a coffee-cup stand?

  Read the article

• vSphere education - What are the downsides of configuring virtual machines with *too* much RAM?

  - by ewwhite

  VMware memory management seems to be a tricky balancing act. With cluster RAM, Resource Pools, VMware's management techniques (TPS, ballooning, host swapping), in-guest RAM utilization, swapping, reservations, shares and limits, there are a lot of variables. I'm in a situation where clients are using dedicated vSphere cluster resources. However, they are configuring the virtual machines as though they were on physical hardware. In turn, this means a standard VM build may have 4 vCPUs and 16GB or more of RAM. I come from the school of starting small (1 vCPU, minimal RAM), checking real-world use and adjusting up as necessary. Some examples from a "problem" cluster. Resource pool summary - Looks almost 4:1 overcommitted. Note the high amount of ballooned RAM. Resource allocation - The Worst Case Allocation column shows that these VMs would have access to less than 50% of their configured RAM under constrained conditions. The real-time memory utilization graph of the top VM in the listing above. 4 vCPU and 64GB RAM allocated. It averages under 9GB use. Summary of the same VM What are the downsides of overcommitting and overconfiguring resources (specifically RAM) in vSphere environments? Assuming that the VMs can run in less RAM, is it fair to say that there's overhead to configuring virtual machines with more RAM than they need? What is the counter-argument to: "if a VM has 16GB of RAM allocated, but only uses 4GB, what's the problem??"? E.g. do customers need to be educated? What specific metric should be used to meter RAM usage. Tracking the peaks of "Active" versus time?

  Read the article

• Unable to mount iso as dvd drive in VMware Fusion 6

  - by John O

  I have a newer iMac without an optical drive and some DVDs that I needed to run software off of. This software will have you juggle discs to read data off of them, and the data can't simply be copied to the machine's drive. I used a windows machine to make ISOs of these DVDs. And the first disc, the installer, it will mount in VMware and let you install the software. It then asks for the other discs, and these won't mount as ISOs. If I mount them as drive images, they'll show up on the iMac's and I have access to all the files. But if I try to mount them as the dvd drive through Fusion, nothing happens. For that matter, I'm unable to attempt it a second time, as Fusion believes that the there is already an iso mounted as the dvd, while nothing has happened as far as the guest OS is concerned. drutil eject will allow me to eject the ghost/non-existent dvd, at which point I can make a second (equally futile) attempt. Does anyone have an explanation for this behavior? How can the ISO be valid enough to mount as a drive image, but not valid enough for Fusion to mount it as if it were a dvd?

  Read the article

• Hyper-V snapshots – unable to start VM

  - by ahmedz

  I restarted my Host server after shutting down three guest VMs. After I restarted the machine I tried to start the VMs and got an error stating the the VM failed to start. SERVERNAME failed to start. Attachment 'avhd file path' is read only. Please provide read/write access to the attachment. Error: 'General access denied error' SERVENAME failed to start. (virtual machine ID 17292200-wd22-dd22-d23-dddddd2222) The issue seems to be with the disk space. The VHD file for this VM is 128 GB and there are two AVHD files of 58 and 75 GB. Whereas the total disk space on this drive (E) is 280 GB - the free space is only around 23 GB. I understand that the error is caused by the unavailability of the required disk space. Unfortunately, I cannot increase the disk space on this drive. However I have another drive (D) that has 400 GB of free space. I exported this VM to D drive and then tried to add the copied AVHD files but it gives me a similar error. I am running Windows Server 2008 R2 Datacenter. Any help is appreciated.

  Read the article

• vmware server 64 bit on ubuntu 9.10 64 bit with P2V windows 2003 SBS poor network speed

  - by RobertHC

  configuration is ubuntu 2.6.31-21 64 bit vmware 2.0.2 64 bit last release hardware is core 2 quad with 8GB ram guest is win 2003 server SBS 32 bit Dear friends, we have a converted physical to virtual windows sbs 2003, converted with last converter available nowadays http://www.vmware.com/products/converter/ vCenter converter. Running the P2V 2K3 SBS on vmware server, it does boot fine, but we do note an abnormal CPU activity and a poor lan speed. As attempts we did what follow. We removed all unneeded peripherals, we removed one NIC (phisycal server was 2 nics), we changed the vmx to ged the nic recognized as intel instead than amd, we removed 1 cpu (physical was 2 cpu), we removed anything was reported as failed driver from system events monitor. Nothing to do, no way and funny results. Let's read some tests results. All are made with the same file copied in different source folders. Copying from client side (both directions copy, to/from server) results are i.e. 10 seconds, copying the same files from server side (again from and to server) results are different... from client to server, speed is round about (bit more) 10 seconds, but from server to client direction is slower: double the time. Beeing very fast and launching a simultaneous copy "from server to client"+"from client to server", this made from the server side, results in a stuck traffic... 45 seconds to do the copy. vmware tools are installed and e1000 driver has been updated. With one processor CPU activity is still going up and down but much less than with two. Because of test, we installed win 2k8 STD 64 bit. We repeated all the above tests with exactly the same file result is just one: always 5 seconds (this matches the lan speed) Any idea about this issue is welcome and thank you if any. Kind regards R.

  Read the article

• 2008R2 Standard and Hyper-V and Ram Usage (Usable vs Available)

  - by Mark

  A new server was purchased for our development team to start utilizing the full feature set of TFS, namely Lab Management. Because of the need for Lab Management we bought a fairly beefy machine to handle this task and to also act as a build machine. I have been tasked to setup additional features TFS on this machine starting out with a build controller and eventually going towards a full out Lab Management setup using Hyper-V. My question: Upon initially logging I noticed that Windows is registering 64gb but only 32gb available. I know this is a limitation because of licencing since only Standard Edition is installed. Since Hyper-V is another layer that handles the virtualization of guest OS's is Hyper-V able to access this memory? Or is Hyper-V memory usage also limited by 2008 R2 Standard? If Hyper-V can somehow access this memory, is this how it should be setup? Or should the host 2008R2 Standard be upgraded to Enterprise so the Host can utilize the full 64gb? Before I go hog wild and using TFS I wanted to ask some experts so I don't need to reinstall the OS down the road to utilize the additional 32gb. Thanks for any help or links you can share.

  Read the article

• Windows Server 2008 - Non-Domain users can see my server shares

  - by ManovrareSoft

  Windows Server 2008 - Server Machine Windows 7 Professional - Client Machine I have a domain. It was setup by the client. The shares on the server are restricted correctly when a user logs on to the domain and uses their workstation, I have a few groups setup to restrict some access but the groups are at their core "Domain Users". The problem I am having is that when a user brings in a laptop with Windows 7 Pro on it, they can type up the name of the server in the "Run Dialog" on the start menu like "\SERVERNAME\" and access all of the shares freely... because they are not logged in to the domain there are no restrictions it seems.I have reviewed the permissions on the folders and they all have to be "Domain Users" and I have removed "Everyone" from the list of people able to see it. Guest access is also disabled...What am I doing wrong? Only group in the list is "Domain Users" isn't a domain user a user that is logged in to the domain? How do I stop non-domain users from seeing the shared folder? I noticed this on Windows Server 2003 too at another time. I assume they both had similar security issues and neither were set up by myself so I am not sure what could have been enabled or specifically deactivated that makes this issue appear.

  Read the article

• System requirements for running windows 8 (basic office use) in virtualbox (ubuntu as host os)

  - by Tor Thommesen

  I want to run windows 8 as a guest os with virtualbox on some thinkpad (haven't bought one yet) running Ubuntu 12.04. Apart from virtualizing windows 8 (mostly just for use with the office suite app) my needs are very modest, I don't need much more than emacs and a browser. What I'd like to know is what kind of specs will be necessary to run windows 8 well as a vm, using the office apps. It would be a shame to waste money on overpowered hardware. Are there any official guidelines from oracle or windows on this? Would this lenovo x220, for example, be sufficiently strong? The specs below were taken from this review. Intel Core i5-2520M dual-core processor (2.5GHz, 3MB cache, 3.2GHz Turbo frequency) Windows 7 Professional (64-bit) 12.5-inch Premium HD (1366 x 768) LED Backlit Display (IPS) Intel Integrated HD Graphics 4GB DDR3 (1333MHz) 320GB Hitachi Travelstar hard drive (Z7K320) Intel Centrino Advanced-N 6205 (Taylor Peak) 2x2 AGN wireless card Intel 82579LM Gigabit Ethernet 720p High Definition webcam Fingerprint reader 6-cell battery (63Wh) and optional slice battery (65Wh) Dimensions: 12 (L) x 8.2 (W) x 0.5-1.5 (H) inches with 6-cell battery Weight: 3.5 pounds with 6-cell battery 4.875 pounds with 6-cell battery and optional external battery slice Price as configured: $1,299.00 (starting at $979.00)

  Read the article

• TCP RST right after FIN/ACK

  - by Nitzan Shaked

  I am having the weirdest issue: I have a web server which sometimes, only on very specific requests, will send a RST to the client after having sent the FIN datagram. First, a description of the setup: The server runs on an Ubuntu 12.04.1 LTS, which itself is a VM guest inside a Win7 x64 host, in bridged mode. ufw is disabled on the host The client runs on a iOS simulator, which runs on OS X Mountain Lion, which is a VM guest (hackintosh) inside a Win7 x64 host, in bridged mode. Both client and server are on the same LAN, one is connected to the home router via an Ethernet cable, and then other thru WiFi. I happened to glimpse over the server's http logs and found that the client sometimes issuing multiple subsequent identical requests. Further investigation led me to discover that this happens when the server sends a RST, and that the client is simply re-trying. I am attaching several tcpdump's: Good1 is the server-side tcpdump of a good session ("good" meaning no RST was generated). Good3 is another sever-side tcpdump of a good session. (The difference between Good1 and Good3 is the order in which ACK's were sent from the server to the client, ACK'ing the client's request. The client's request arives in 2 segements (specifically: one for the http headers, and another for a body containing an empty json object, "{}"). In Good1, the server ACK's both request segments, using 2 ACK segments, after the second request has arrived. In Good3, the server ACK's each request segment with an ACK segment as soon as the request segment arrives. Not that it should make a difference.) Bad1 is a dump, both client- and server-side, of a bad session. Bad2 is another bad session, this time server-side only. Note that in all "bad" sessions, the server ACK's each request segments immediately after having received it. I've looked at a few other bad sessions, and the situation is the same in all of them. But this is also the behavior in "Good3", so I don't see how that observation helps me, of for that matter why it should matter. I can't find any difference between good and bad sessions, or at least one that I think should matter. My question is: why are those RST's being generated? Or at least: how do I go about debugging this, or providing more info here that'll help? Edit 2 new facts that I have learned: Section 4.2.2.13 of the RFC (1122) (and Wikipedia, in the article "TCP", under "Connection Termination") says that a TCP application on one host may close the connection before it has read all of the data in its socket buffer, and in such a case the TCP on the host will sent a RST to the other side, to let it know that not all the data it has sent has been read. I'm not sure I completely understand this, since closing my side of the connection still allows me to read, no? It also means that I can't write any more. I am not sure this is relevant, though, since I see a RST after FIN. There are multiple complaints of this happening with wsgiref (Python's dev-mode HTTP server), which is exactly what I'm using. I'll keep updating as I find out more. Thanks! ~~~~~~~~~~~~~~~~~~~~ Good1 -- Server Side ~~~~~~~~~~~~~~~~~~~~ 13:28:02.308319 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [S], seq 94268074, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943308864 ecr 0,sackOK,eol], length 0 13:28:02.308336 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [S.], seq 1726304574, ack 94268075, win 14480, options [mss 1460,sackOK,TS val 326480982 ecr 943308864,nop,wscale 3], length 0 13:28:02.309750 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943308865 ecr 326480982], length 0 13:28:02.310744 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943308865 ecr 326480982], length 350 13:28:02.310766 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943308865 ecr 326480982], length 2 13:28:02.310841 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326480983 ecr 943308865], length 0 13:28:02.310918 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326480983 ecr 943308865], length 0 13:28:02.315931 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326480984 ecr 943308865], length 17 13:28:02.316107 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326480984 ecr 943308865], length 666 13:28:02.317651 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943308872 ecr 326480984], length 0 13:28:02.318288 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943308872 ecr 326480984], length 0 13:28:02.318640 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [F.], seq 353, ack 685, win 8192, options [nop,nop,TS val 943308872 ecr 326480984], length 0 13:28:02.318651 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [.], ack 354, win 1944, options [nop,nop,TS val 326480985 ecr 943308872], length 0 ~~~~~~~~~~~~~~~~~~~~ Good3 -- Server Side ~~~~~~~~~~~~~~~~~~~~ 13:28:03.311143 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [S], seq 1982901126, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943309853 ecr 0,sackOK,eol], length 0 13:28:03.311155 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [S.], seq 2245063571, ack 1982901127, win 14480, options [mss 1460,sackOK,TS val 326481233 ecr 943309853,nop,wscale 3], length 0 13:28:03.312671 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943309854 ecr 326481233], length 0 13:28:03.313330 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943309855 ecr 326481233], length 350 13:28:03.313337 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326481234 ecr 943309855], length 0 13:28:03.313342 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943309855 ecr 326481233], length 2 13:28:03.313346 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326481234 ecr 943309855], length 0 13:28:03.327942 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326481237 ecr 943309855], length 17 13:28:03.328253 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326481237 ecr 943309855], length 666 13:28:03.329076 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943309868 ecr 326481237], length 0 13:28:03.329688 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943309868 ecr 326481237], length 0 13:28:03.330361 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [F.], seq 353, ack 685, win 8192, options [nop,nop,TS val 943309869 ecr 326481237], length 0 13:28:03.330370 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [.], ack 354, win 1944, options [nop,nop,TS val 326481238 ecr 943309869], length 0 ~~~~~~~~~~~~~~~~~~~~ Bad1 -- Server Side ~~~~~~~~~~~~~~~~~~~~ 13:28:01.311876 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [S], seq 920400580, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943307883 ecr 0,sackOK,eol], length 0 13:28:01.311896 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [S.], seq 3103085782, ack 920400581, win 14480, options [mss 1460,sackOK,TS val 326480733 ecr 943307883,nop,wscale 3], length 0 13:28:01.313509 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943307884 ecr 326480733], length 0 13:28:01.315614 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943307886 ecr 326480733], length 350 13:28:01.315727 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326480734 ecr 943307886], length 0 13:28:01.316229 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943307886 ecr 326480733], length 2 13:28:01.316242 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326480734 ecr 943307886], length 0 13:28:01.321019 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326480735 ecr 943307886], length 17 13:28:01.321294 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307886], length 666 13:28:01.321386 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R.], seq 685, ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307886], length 0 13:28:01.322727 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943307891 ecr 326480735], length 0 13:28:01.322733 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R], seq 3103085800, win 0, length 0 13:28:01.323221 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943307892 ecr 326480736], length 0 13:28:01.323231 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R], seq 3103086467, win 0, length 0 ~~~~~~~~~~~~~~~~~~~~ Bad1 -- Client Side ~~~~~~~~~~~~~~~~~~~~ 13:28:11.374654 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [S], seq 920400580, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943307883 ecr 0,sackOK,eol], length 0 13:28:11.375764 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [S.], seq 3103085782, ack 920400581, win 14480, options [mss 1460,sackOK,TS val 326480733 ecr 943307883,nop,wscale 3], length 0 13:28:11.376352 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943307884 ecr 326480733], length 0 13:28:11.378252 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943307886 ecr 326480733], length 350 13:28:11.379027 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943307886 ecr 326480733], length 2 13:28:11.379732 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326480734 ecr 943307886], length 0 13:28:11.380592 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326480734 ecr 943307886], length 0 13:28:11.384968 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326480735 ecr 943307886], length 17 13:28:11.385044 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943307891 ecr 326480735], length 0 13:28:11.385586 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307886], length 666 13:28:11.385743 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943307892 ecr 326480736], length 0 13:28:11.385966 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R.], seq 685, ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307886], length 0 13:28:11.387343 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R], seq 3103085800, win 0, length 0 13:28:11.387344 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R], seq 3103086467, win 0, length 0 ~~~~~~~~~~~~~~~~~~~~ Bad2 -- Server Side ~~~~~~~~~~~~~~~~~~~~ 13:28:01.319185 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [S], seq 1631526992, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943307889 ecr 0,sackOK,eol], length 0 13:28:01.319197 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [S.], seq 2524685719, ack 1631526993, win 14480, options [mss 1460,sackOK,TS val 326480735 ecr 943307889,nop,wscale 3], length 0 13:28:01.320692 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943307890 ecr 326480735], length 0 13:28:01.322219 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943307890 ecr 326480735], length 350 13:28:01.322336 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326480736 ecr 943307890], length 0 13:28:01.322689 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943307890 ecr 326480735], length 2 13:28:01.322700 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307890], length 0 13:28:01.326307 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326480737 ecr 943307890], length 17 13:28:01.326614 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326480737 ecr 943307890], length 666 13:28:01.326710 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [R.], seq 685, ack 353, win 1944, options [nop,nop,TS val 326480737 ecr 943307890], length 0 13:28:01.328499 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943307896 ecr 326480737], length 0 13:28:01.328509 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [R], seq 2524685737, win 0, length 0 13:28:01.328514 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943307896 ecr 326480737], length 0 13:28:01.328517 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [R], seq 2524686404, win 0, length 0

  Read the article

• How to access members of an rdf list with rdflib (or plain sparql)

  - by tjb

  What is the best way to access the members of an rdf list? I'm using rdflib (python) but an answer given in plain SPARQL is also ok (this type of answer can be used through rdfextras, a rdflib helper library). I'm trying to access the authors of a particular journal article in rdf produced by Zotero (some fields have been removed for brevity): <rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:z="http://www.zotero.org/namespaces/export#" xmlns:dcterms="http://purl.org/dc/terms/" xmlns:bib="http://purl.org/net/biblio#" xmlns:foaf="http://xmlns.com/foaf/0.1/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:prism="http://prismstandard.org/namespaces/1.2/basic/" xmlns:link="http://purl.org/rss/1.0/modules/link/"> <bib:Article rdf:about="http://www.ncbi.nlm.nih.gov/pubmed/18273724"> <z:itemType>journalArticle</z:itemType> <dcterms:isPartOf rdf:resource="urn:issn:0954-6634"/> <bib:authors> <rdf:Seq> <rdf:li> <foaf:Person> <foaf:surname>Lee</foaf:surname> <foaf:givenname>Hyoun Seung</foaf:givenname> </foaf:Person> </rdf:li> <rdf:li> <foaf:Person> <foaf:surname>Lee</foaf:surname> <foaf:givenname>Jong Hee</foaf:givenname> </foaf:Person> </rdf:li> <rdf:li> <foaf:Person> <foaf:surname>Ahn</foaf:surname> <foaf:givenname>Gun Young</foaf:givenname> </foaf:Person> </rdf:li> <rdf:li> <foaf:Person> <foaf:surname>Lee</foaf:surname> <foaf:givenname>Dong Hun</foaf:givenname> </foaf:Person> </rdf:li> <rdf:li> <foaf:Person> <foaf:surname>Shin</foaf:surname> <foaf:givenname>Jung Won</foaf:givenname> </foaf:Person> </rdf:li> <rdf:li> <foaf:Person> <foaf:surname>Kim</foaf:surname> <foaf:givenname>Dong Hyun</foaf:givenname> </foaf:Person> </rdf:li> <rdf:li> <foaf:Person> <foaf:surname>Chung</foaf:surname> <foaf:givenname>Jin Ho</foaf:givenname> </foaf:Person> </rdf:li> </rdf:Seq> </bib:authors> <dc:title>Fractional photothermolysis for the treatment of acne scars: a report of 27 Korean patients</dc:title> <dcterms:abstract>OBJECTIVES: Atrophic post-acne scarring remains a therapeutically challe *CUT*, erythema and edema. CONCLUSIONS: The 1550-nm erbium-doped FP is associated with significant patient-reported improvement in the appearance of acne scars, with minimal downtime.</dcterms:abstract> <bib:pages>45-49</bib:pages> <dc:date>2008</dc:date> <z:shortTitle>Fractional photothermolysis for the treatment of acne scars</z:shortTitle> <dc:identifier> <dcterms:URI> <rdf:value>http://www.ncbi.nlm.nih.gov/pubmed/18273724</rdf:value> </dcterms:URI> </dc:identifier> <dcterms:dateSubmitted>2010-12-06 11:36:52</dcterms:dateSubmitted> <z:libraryCatalog>NCBI PubMed</z:libraryCatalog> <dc:description>PMID: 18273724</dc:description> </bib:Article> <bib:Journal rdf:about="urn:issn:0954-6634"> <dc:title>The Journal of Dermatological Treatment</dc:title> <prism:volume>19</prism:volume> <prism:number>1</prism:number> <dcterms:alternative>J Dermatolog Treat</dcterms:alternative> <dc:identifier>DOI 10.1080/09546630701691244</dc:identifier> <dc:identifier>ISSN 0954-6634</dc:identifier> </bib:Journal>

  Read the article

• Yet another C# Deadlock Debugging Question

  - by Roo

  Hi All, I have a multi-threaded application build in C# using VS2010 Professional. It's quite a large application and we've experienced the classing GUI cross-threading and deadlock issues before, but in the past month we've noticed the appears to lock up when left idle for around 20-30 minutes. The application is irresponsive and although it will repaint itself when other windows are dragged in front of the application and over it, the GUI still appears to be locked... interstingly (unlike if the GUI thread is being used for a considerable amount of time) the Close, Maximise and minimise buttons are also irresponsive and when clicked the little (Not Responding...) text is not displayed in the title of the application i.e. Windows still seems to think it's running fine. If I break/pause the application using the debugger, and view the threads that are running. There are 3 threads of our managed code that are running, and a few other worker threads whom the source code cannot be displayed for. The 3 threads that run are: The main/GUI thread A thread that loops indefinitely A thread that loops indefinitely If I step into threads 2 and 3, they appear to be looping correctly. They do not share locks (even with the main GUI thread) and they are not using the GUI thread at all. When stepping into the main/GUI thread however, it's broken on Application.Run... This problem screams deadlock to me, but what I don't understand is if it's deadlock, why can't I see the line of code the main/GUI thread is hanging on? Any help will be greatly appreciated! Let me know if you need more information... Cheers, Roo -----------------------------------------------------SOLUTION-------------------------------------------------- Okay, so the problem is now solved. Thanks to everyone for their suggestions! Much appreciated! I've marked the answer that solved my initial problem of determining where on the main/UI thread the application hangs (I handn't turned off the "Enable Just My Code" option). The overall issue I was experiencing was indeed Deadlock, however. After obtaining the call-stack and popping the top half of it into Google I came across this which explains exactly what I was experiencing... http://timl.net/ This references a lovely guide to debugging the issue... http://www.aaronlerch.com/blog/2008/12/15/debugging-ui/ This identified a control I was constructing off the GUI thread. I did know this, however, and was marshalling calls correctly, but what I didn't realise was that behind the scenes this Control was subscribing to an event or set of events that are triggered when e.g. a Windows session is unlocked or the screensaver exits. These calls are always made on the main/UI thread and were blocking when it saw the call was made on the incorrect thread. Kim explains in more detail here... http://krgreenlee.blogspot.com/2007/09/onuserpreferencechanged-hang.html In the end I found an alternative solution which did not require this Control off the main/UI thread. That appears to have solved the problem and the application no longer hangs. I hope this helps anyone who's confronted by a similar problem. Thanks again to everyone on here who helped! (and indirectly, the delightful bloggers I've referenced above!) Roo -----------------------------------------------------SOLUTION II-------------------------------------------------- Aren't threading issues delightful...you think you've solved it, and a month down the line it pops back up again. I still believe the solution above resolved an issue that would cause simillar behaviour, but we encountered the problem again. As we spent a while debugging this, I thought I'd update this question with our (hopefully) final solution: The problem appears to have been a bug in the Infragistics components in the WinForms 2010.1 release (no hot fixes). We had been running from around the time the freeze issue appeared (but had also added a bunch of other stuff too). After upgrading to WinForms 2010.3, we've yet to reproduce the issue (deja vu). See my question here for a bit more information: 'http://stackoverflow.com/questions/4077822/net-4-0-and-the-dreaded-onuserpreferencechanged-hang'. Hans has given a nice summary of the general issue. I hope this adds a little to the suggestions/information surrounding the nutorious OnUserPreferenceChanged Hang (or whatever you'd like to call it). Cheers, Roo

  Read the article

• Cannot login to Ubuntu 14.04 returns to the login screen

  - by Safder

  I updated to 14.04 from 12.04.03. I was using cinammon at that time. When I upgraded to 14.04 ,I got a serious problem. I was unable to login, as whenever I hit enter after entering password, it is taking me straight to login screen again.I unable to login like Guest even. So, here is my .xsession-errors file. possibly anyone could help. Thanks in advance. Script for ibus started at run_im. Script for auto started at run_im. Script for default started at run_im. init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd respawning too fast, stopped init: gnome-settings-daemon main process (14717) killed by TRAP signal init: gnome-settings-daemon main process ended, respawning init: update-notifier-crash (/var/crash/_usr_bin_gnome-session.1000.crash) main process (14607) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_ibus_ibus-x11.1000.crash) main process (14623) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_x86_64-linux-gnu_bamf_bamfdaemon.1000.crash) main process (14663) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_ibus_ibus-ui-gtk3.1000.crash) main process (14620) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_gnome-session_gnome-session-check-accelerated.1000.crash) main process (14612) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_gnome-settings-daemon_gnome-settings-daemon.1000.crash) main process (14616) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_unity_unity-panel-service.1000.crash) main process (14629) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_unity-settings-daemon_unity-settings-daemon.1000.crash) main process (14625) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_update-notifier_system-crash-notification.1000.crash) main process (14662) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_gnome-session_gnome-session-check-accelerated.127.crash) main process (14613) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_share_apport_apport-gtk.1000.crash) main process (14665) terminated with status 133 init: update-notifier-crash (/var/crash/linux-image-3.13.0-24-generic.0.crash) main process (14606) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_bin_Xorg.0.crash) main process (14609) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_ibus_ibus-x11.127.crash) main process (14624) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_ibus_ibus-ui-gtk3.127.crash) main process (14622) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_gnome-settings-daemon_gnome-settings-daemon.127.crash) main process (14618) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_unity-settings-daemon_unity-settings-daemon.127.crash) main process (14628) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_x86_64-linux-gnu_bamf_bamfdaemon.127.crash) main process (14664) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_bin_gnome-session.127.crash) main process (14608) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_lib_unity_unity-panel-service.127.crash) main process (14634) terminated with status 133 init: update-notifier-crash (/var/crash/_usr_share_apport_apport-gtk.127.crash) main process (14667) terminated with status 133 init: gnome-settings-daemon main process (14843) killed by TRAP signal init: gnome-settings-daemon main process ended, respawning init: gnome-settings-daemon main process (14850) killed by TRAP signal init: gnome-settings-daemon main process ended, respawning init: gnome-session (GNOME) main process (14727) killed by TRAP signal init: gnome-settings-daemon main process (14859) killed by TRAP signal init: logrotate main process (14570) killed by TERM signal init: upstart-dbus-session-bridge main process (14683) terminated with status 1 init: Disconnected from notified D-Bus bus

  Read the article

• SQLAuthority News – 1600 Blog Post Articles – A Milestone

  - by pinaldave

  It was really a very interesting moment for me when I was writing my 1600th milestone blog post. Now it`s a lot more exciting because this time it`s my 1600th blog post. Every time I write a milestone blog post such as this, I have the same excitement as when I was writing my very first blog post. Today I want to write about a few statistics of the blog. Statistics I am frequently asked about my blog stats, so I have already published my blog stats which are measured by WordPress.com. Currently, I have more than 22 Million+ Views on this blog from various sources. There are more than 6200+ feed subscribers in Google Reader only; I think I don`t have to count all other subscribers. My LinkedIn has 1250+ connection, while my Twitter has 2150+. Because I feel that I`m well connected with the Community, I am very thankful to you, my readers. Today I also want to say Thank You to those experts who have helped me to improve. I have maintained a list of all the articles I have written. If you go to my first articles, you will notice that they were a little different from the articles I am writing today. The reason for this is simple: I have two kinds of people helping me write all the better: readers and experts. To my Readers You read the articles and gave me feedback about what was right or wrong, what you liked or disliked. Quite often, you were helpful in writing guest posts, and I also recognize how you were a bit brutal in criticizing some articles, making me re-write them. Because of you, I was able to write better blog posts. To Experts You read the articles and helped me improve. I get inspiration from you and learned a lot from you. Just like everybody, I am a guy who is trying to learn. There are times when I had vague understanding of some subjects, and you did not hesitate to help me. Number of Posts Many ask me if the number of posts is important to me. My answer is YES. Actually, it`s just not about the number of my posts; it is about my blog, my routine, my learning experience and my journey. During the last four years, I have decided that I would be learning one thing a day. This blog has helped me accomplish this goal because in here I have been able to keep my notes and bookmarks. Whatever I learn or experience, I blog and share it with the Community. For me, the blog post number is more than just a number: it`s a summary of my experiences and memories. Once again, thanks for reading and supporting my blog! Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Milestone, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, SQLServer, T SQL, Technology

  Read the article

• The “Customer” Experience Revolution is Here

  - by Natalia Rachelson

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A guest post by Anthony Lye, SVP, Oracle Development The Experience Revolution is here, and we are going to explore and celebrate our new customer experience ventures and strategy in an extraordinary way. In true Oracle fashion, we are hosting an exceptional event, bringing together customer experience advocates, visionaries and practitioners to discover and define Oracle’s Customer Experience vision. The Experience Revolution is best described as today’s era of the empowered consumer. For those of us who work with customers on a daily basis, we know that the modern consumer demands fast, accurate, consistent information across all communication channels. And if they don’t like the services received can easily take to social channels to voice disapproval. For this reason, organizations today operate in an environment where traditional methods of differentiation are less effective and customer experience has become the primary driver of business value. Here’s some food for thought, according to the 2011 Customer Experience Impact (CEI) Report, a full 89 percent of consumers will switch brands for a better customer experience. In short, in today’s era of the empowered consumer, delivering excellent customer experiences is what will, and is, defining the next great brands. At The Experience Revolution, Oracle President Mark Hurd will detail the vision of where customer experience is going and how Oracle will help you get there. He will introduce for the first time Oracle Customer Experience, a cross stack suite of customer experience products that enable organizations to: Engage customers with a consistent, connected and personalized brand experience across all channels and devices Deliver exceptional cross-channel order fulfillment and customer service through web, call centers and social networks Connect and analyze data from all interactions to better personalize experiences and identify hidden opportunities The Experience Revolution will also include an interactive gallery of customer experience interactions, featuring videos, touch screens and near field communication technology that will guide each attendee through an individualized event experience. We hope you will join us for an incredible evening on June 25, from 6:00 – 9:00 p.m. at Gotham Hall in New York City. You can register for The Experience Revolution here. And if you haven’t already joined the conversation on Twitter, please do: #OracleCX, #ExperienceRevolution

  Read the article

• How to Install Oracle Software on Remote Linux Server

  - by James Taylor

  It is becoming more common these days to install Oracle software on remote Linux servers. This issue has always existed but was generally resolved either by silent installs or by someone physically going to the server to install the software. This is becoming more difficult with the popular virtualisation and cloud deployment strategies. This post provides the steps involved to install Oracle Software using the GUI interface on a remote Linux server. There are many ways to achieve this, the way I resolve this issue is via Virtual Network Computing (VNC) as it is shipped with RedHat and OEL out of the box. For this post I’m using OEL 5 deployed on a OVM guest. If not already done so download and install a client version of VNC so you can connect to the server. There are many out there, for the purpose of this post I use UltraVNC. You can download a free version from http://www.uvnc.com/download/index.html By default VNC Server is installed in your RedHat and OEL OS, but it is not configured. The way VNC works is when started it creates a client instance for the user and binds it to a specific port. So if have an account on the Linux box you can setup a VNC Server session for that user, you don’t need to be root. For the purpose of this document I’m going to use oracle as the user to setup a VNC Session as this is the user I want use to install the software. However to start the VNC Service you must be root. As the root user run the following command: service vncserver start Starting VNC server: no displays configured                [  OK  ] Login to the Linux box as the user  you wan to install the Oracle software [oracle@lisa ~]$ Run the command to create a new VNC server instance for the oracle user: vncserver You will be ask to supply password information. This is what you will enter when connecting from your desktop client. This password is also independent of the actual Linux user password. The VNC Server is acting as a proxy to this instance. You will require a password to access your desktops. Password: Verify: xauth:  creating new authority file /home/oracle/.Xauthority New 'lisa.nz.oracle.com:1 (oracle)' desktop is lisa.nz.oracle.com:1 Creating default startup script /home/oracle/.vnc/xstartup Starting applications specified in /home/oracle/.vnc/xstartup Log file is /home/oracle/.vnc/lisa.nz.oracle.com:1.log As you can see a new instance lisa.nz.oracle.com:1 has been created. If you were to run the vncserver command again another instance lisa.nz.oracle.com:2 will be created. If you are going through a firewall you will need to ensure that the port 5901 (port 1) is open between your client desktop and the Linux Server. Depending on the options chosen at install time a firewall could be in place. The simplest way to disable this is using the command. You will need to be root. service iptables stop This will stop the firewall while you install. If you just want to add a port to the accepted lists use the firewall UI. You will need to be root. system-config-security-level Now you are ready to connect to the server via the VNC. Using the software installed in step one start the VNC Client. You should be prompted for the server and port. If connectivity is established, you will be prompted for the password entered in step 5. You should now be presented with a terminal screen ready to install software Go to the location of the oracle install software and start the Oracle Universal Installer

  Read the article

• New security options in UCM Patch Set 3

  - by kyle.hatlestad

  While the Patch Set 3 (PS3) release was mostly focused on bug fixes and such, some new features sneaked in there. One of those new features is to the security options. In 10gR3 and prior versions, UCM had a component called Collaboration Manager which allowed for project folders to be created and groups of users assigned as members to collaborate on documents. With this component came access control lists (ACL) for content and folders. Users could assign specific security rights on each and every document and folder within a project. And it was even possible to enable these ACL's without having the Collaboration Manager component enabled (see technote# 603148.1). When 11g came out, Collaboration Manager was no longer available. But the configuration settings to turn on ACLs were still there. Well, in PS3 they're implemented slightly differently. And there is a new component available which adds an additional dimension to define security on the object, Roles. So now instead of selecting individual users or groups of users (defined as an Alias in User Admin), you can select a particular role. And if a user has that role, they are granted that level of access. This can allow for a much more flexible and manageable security model instead of trying to manage with just user and group access as people come and go in the organization. The way that it is enabled is still through configuration entries. First log in as an administrator and go to Administration -> Admin Server. On the Component Manager page, click the 'advanced component manager' link in the description paragraph at the top. In the list of Disabled Components, enable the RoleEntityACL component. Then click the General Configuration link on the left. In the Additional Configuration Variables text area, enter the new configuration values: UseEntitySecurity=true SpecialAuthGroups=<comma separated list of Security Groups to honor ACLs> The SpecialAuthGroups should be a list of Security Groups that honor the ACL fields. If an ACL is applied to a content item with a Security Group outside this list, it will be ignored. Save the settings and restart the instance. Upon restart, three new metadata fields will be created: xClbraUserList, xClbraAliasList, xClbraRoleList. If you are using OracleTextSearch as the search indexer, be sure to run a Fast Rebuild on the collection. On the Check In, Search, and Update pages, values are added by simply typing in the value and getting a type-ahead list of possible values. Select the value, click Add and then set the level of access (Read, Write, Delete, or Admin). If all of the fields are blank, then it simply falls back to just Security Group and Account access. For Users and Groups, these values are automatically picked up from the corresponding database tables. In the case of Roles, this is an explicitly defined list of choices that are made available. These values must match the role that is being defined from WebLogic Server or you LDAP/AD repository. To add these values, go to Administration -> Admin Applets -> Configuration Manager. On the Views tab, edit the values for the ExternalRolesView. By default, 'guest' and 'authenticated' are added. Once added to through the view, they will be available to select from for the Roles Access List. As for how they are stored in the metadata fields, each entry starts with it's identifier: ampersand (&) symbol for users, "at" (@) symbol for groups, and colon (:) for roles. Following that is the entity name. And at the end is the level of access in paranthesis. e.g. (RWDA). And each entry is separated by a comma. So if you were populating values through batch loader or an external source, the values would be defined this way. Detailed information on Access Control Lists can be found in the Oracle Fusion Middleware System Administrator's Guide for Oracle Content Server.

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >