Search Results

Search found 7213 results on 289 pages for 'multi processor'.

Page 83/289 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

  • Concurrent Affairs

    - by Tony Davis
    I once wrote an editorial, multi-core mania, on the conundrum of ever-increasing numbers of processor cores, but without the concurrent programming techniques to get anywhere near exploiting their performance potential. I came to the.controversial.conclusion that, while the problem loomed for all procedural languages, it was not a big issue for the vast majority of programmers. Two years later, I still think most programmers don't concern themselves overly with this issue, but I do think that's a bigger problem than I originally implied. Firstly, is the performance boost from writing code that can fully exploit all available cores worth the cost of the additional programming complexity? Right now, with quad-core processors that, at best, can make our programs four times faster, the answer is still no for many applications. But what happens in a few years, as the number of cores grows to 100 or even 1000? At this point, it becomes very hard to ignore the potential gains from exploiting concurrency. Possibly, I was optimistic to assume that, by the time we have 100-core processors, and most applications really needed to exploit them, some technology would be around to allow us to do so with relative ease. The ideal solution would be one that allows programmers to forget about the problem, in much the same way that garbage collection removed the need to worry too much about memory allocation. From all I can find on the topic, though, there is only a remote likelihood that we'll ever have a compiler that takes a program written in a single-threaded style and "auto-magically" converts it into an efficient, correct, multi-threaded program. At the same time, it seems clear that what is currently the most common solution, multi-threaded programming with shared memory, is unsustainable. As soon as a piece of state can be changed by a different thread of execution, the potential number of execution paths through your program grows exponentially with the number of threads. If you have two threads, each executing n instructions, then there are 2^n possible "interleavings" of those instructions. Of course, many of those interleavings will have identical behavior, but several won't. Not only does this make understanding how a program works an order of magnitude harder, but it will also result in irreproducible, non-deterministic, bugs. And of course, the problem will be many times worse when you have a hundred or a thousand threads. So what is the answer? All of the possible alternatives require a change in the way we write programs and, currently, seem to be plagued by performance issues. Software transactional memory (STM) applies the ideas of database transactions, and optimistic concurrency control, to memory. However, working out how to break down your program into sufficiently small transactions, so as to avoid contention issues, isn't easy. Another approach is concurrency with actors, where instead of having threads share memory, each thread runs in complete isolation, and communicates with others by passing messages. It simplifies concurrent programs but still has performance issues, if the threads need to operate on the same large piece of data. There are doubtless other possible solutions that I haven't mentioned, and I would love to know to what extent you, as a developer, are considering the problem of multi-core concurrency, what solution you currently favor, and why. Cheers, Tony.

    Read the article

  • Event-Driven Debugging

    - by Brian Donahue
    Most application troubleshooting involves getting an error, analyzing the error message, and at worst, attaching a debugger to work out the real cause. What is not really covered is how to troubleshoot an applicaiton that is not errant, but is having a performance issue, and more than likely, in the middle of the night when you are snug in your bed, sawing logs. What you need is an ever-vigilant cyborg who never sleeps to sit in front of your server all night, but as SkyNet is not live yet, you can settle for the next-best thing. Windows provides performance counters and alerts that can tell you when an applicaiton reaches an unacceptable threshold of naughty behavior, but although it can tattle on your brainchild, it won't be the child psychiatrist that you need to tell you why he's pulling your server's pigtails and pulling faces at the teacher. What you need is to plug a debugger into performance monitor and have it tell you what's going on with your applicaiton at the time. For this purpose, I'd used Microsoft's MDbgEngine as the basis for an applicaiton that will dump a program's stacks, I call it Application Slicer Dicer Wonder Dumper Super Cyborg, or StackOMatic for short. StackOMatic can look at a program's behavior and tell you if the stacks are not moving, but it can also work on the command-line to dump all managed methods on the stack at will. Now that there is a command you can use to dump the stacks, all you need to do is politely tell Windows to run it when you're displeased with your creation as it's trashing the CPU of your server at 3 AM. The first step is to create a scheduled task to tell StackOMatic to dump your applicaiton. Start Task Scheduler and right-click Task Scheduler Library and then Create Task. For this exercise I'm creating a task that will dump the Red Gate SQL Monitor Base Monitor Service. In the Actions tab, I enter the path to StackOMatic and use the arguments to log the stack dump to a file: /PN:RedGate.Response.Engine.Alerting.Base.Service /OUT:c:\users\administrator\MonitorLog.txt Next, I go into Windows Server 2008's Reliability and Performance Monitor and add a new Data Collector Set. This set will produce an alert on the %Processor Time for the service. When the processor time breaches 50%, it will run the StackDumpBaseService task I created. Whenever the service misbehaves, it will append to the log file. Now when I go to work in the morning, I can see what the service was doing when it overloaded the processor and take action.

    Read the article

  • No Sound in 12.04 on Acer TimelineX 3830TG

    - by Fawkes5
    When i first installed ubuntu 12.04 everything worked fine. All of a sudden my sound has stopped working!! This has happened before [like 2 days ago], however the next day it started working again. That may happen again...[I've already rebooted 5 times] My Sound Card is a HDA intel PCH My Sound Chip is Intel CougarPoint HDMI My machine is an Acer TimelineX 3830TG, heres my lcpci output 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) I'm running a dual boot with Windows 7, sound always works there. I've tried loading earlier kernels [3.2.0 ] but that hasn't helped. I've tried playing with alsamixer, unmuting and raising volume, doesn't work I've tried playing with pauvcontrol, doesnt work. Althought, strangely, when i play a song, under output i can see a bar moving implying that something is working, just the sound isn't getting through my speakers. Thus it might be a hardware problem. I've tried unistalling and reinstalling pulsaudio annd alsamixer, doesn't work [maybe made it worse...]. I've heard reverting back to kernel 3.0... works, but i'm reluctant to try that[i dont know much about kernels]. Thank you. Please tell me what other information you need. EDIT: My audio has started working again after another reboot. However this time im not connected to my external audio on startup. I will see if this is the issue next time i'm at home Edit: Connecting to external audio is not the problem.

    Read the article

  • Shutdown problem in ubuntu 12.04 LTS

    - by sudeep
    I am using Ubuntu 12.04 LTS and I'm getting a serious bug: When I try to shutdown my system, my screen goes blank but my CPU fan keeps running, i.e. the processor is still working but I am not able to see anything on my screen. I need to power off my machine for a complete shutdown. I am using a desktop with an Intel P4 processor. I found a solution on the internet involving modifying the GRUB config file. But even after doing so I wasn't able to eliminate the issue.

    Read the article

  • Is there any remote desktop with sound and video capabilities allowing 2 different users work simultaniousely (a local and a remote one)?

    - by psihodelia
    I have a very powerful PC with Intel processor and a small Mac laptop with PowerPC processor. Both computers are with Ubuntu Linux. Mac laptop cannot play flash videos and I cannot install any Intel-CPU program on it (like Skype). So, it means I can install only open source applications on the laptop from Ubuntu repositories. I have two different Ubuntu system users on PC, say ME and SHE (and root as well :) ). If I work as user ME on PC, then user SHE should also be able to access my PC remotely from her laptop and she should see a desktop of user SHE, not my desktop. She also must be able watch videos, flash, and listen sounds. Is it possible with Ubuntu?

    Read the article

  • TripleDES in Perl/PHP/ColdFusion

    - by Seidr
    Recently a problem arose regarding hooking up an API with a payment processor who were requesting a string to be encrypted to be used as a token, using the TripleDES standard. Our Applications run using ColdFusion, which has an Encrypt tag - that supports TripleDES - however the result we were getting back was not what the payment processor expected. First of all, here is the resulting token the payment processor were expecting. AYOF+kRtg239Mnyc8QIarw== And below is the snippet of ColdFusion we were using, and the resulting string. <!--- Coldfusion Crypt (here be monsters) ---> <cfset theKey="123412341234123412341234"> <cfset theString = "username=test123"> <cfset strEncodedEnc = Encrypt(theString, theKey, "DESEDE", "Base64")> <!--- resulting string(strEncodedEnc): tc/Jb7E9w+HpU2Yvn5dA7ILGmyNTQM0h ---> As you can see, this was not returning the string we were hoping for. Seeking a solution, we ditched ColdFusion for this process and attempted to reproduce the token in PHP. Now I'm aware that various languages implement encryption in different ways - for example in the past managing encryption between a C# application and PHP back-end, I've had to play about with padding in order to get the two to talk, but my experience has been that PHP generally behaves when it comes to encryption standards. Anyway, on to the PHP source we tried, and the resulting string. /* PHP Circus (here be Elephants) */ $theKey="123412341234123412341234"; $theString="username=test123"; $strEncodedEnc=base64_encode(mcrypt_ecb (MCRYPT_3DES, $theKey, $theString, MCRYPT_ENCRYPT)); /* resulting string(strEncodedEnc): sfiSu4mVggia8Ysw98x0uw== */ As you can plainly see, we've got another string that differs from both the string expected by the payment processor AND the one produced by ColdFusion. Cue head-against-wall integration techniques. After many to-and-fro communications with the payment processor (lots and lots of reps stating 'we can't help with coding issues, you must be doing it incorrectly, read the manual') we were finally escalated to someone with more than a couple of brain-cells to rub together, who was able to step back and actually look at and diagnose the issue. He agreed, our CF and PHP attempts were not resulting in the correct string. After a quick search, he also agreed that it was not neccesarily our source, but rather how the two languages implemented their vision of the TripleDES standard. Coming into the office this morning, we were met by an email with a snippet of source code, in Perl. This is was the code they were directly using on their end to produce the expected token. #!/usr/bin/perl # Perl Crypt Calamity (here be...something) use strict; use CGI; use MIME::Base64; use Crypt::TripleDES; my $cgi = CGI->new(); my $param = $cgi->Vars(); $param->{key} = "123412341234123412341234"; $param->{string} = "username=test123"; my $des = Crypt::TripleDES->new(); my $enc = $des->encrypt3($param->{string}, $param->{key}); $enc = encode_base64($enc); $enc =~ s/\n//gs; # resulting string (enc): AYOF+kRtg239Mnyc8QIarw== So, there we have it. Three languages, three implementations of what they quote in the documentation as TripleDES Standard Encryption, and three totally different resulting strings. My question is, from your experience of these three languages and their implementations of the TripleDES algorithm, have you been able to get any two of them to give the same response, and if so what tweaks to the code did you have to make in order to come to the result? I understand this is a very drawn out question, but I wanted to give clear and precise setting for each stage of testing that we had to perform. I'll also be performing some more investigatory work on this subject later, and will post any findings that I come up with to this question, so that others may avoid this headache.

    Read the article

  • update jframe in java or revalidate/repaint/ panel

    - by user1516251
    How to update a java frame with changed content I want to update a frame or just the panel with updated content. What do I use for this Here is where i want to revalidate the frame or repaint mainpanel or whatever will work I have tried a number of things, but none of them have worked. public void actionPerformed(ActionEvent e) { //System.out.println(e.getActionCommand()); if (e.getActionCommand().equals("advance")) { multi--; // Revalidate update repaint here <<<<<<<<<<<<<<<<<<< } else if (e.getActionCommand().equals("reverse")) { multi++; // Revalidate update repaint here <<<<<<<<<<<<<<<<<<< } else { openURL(e.getActionCommand()); } } Here is the whole java file /* * * */ package build; import java.lang.reflect.Method; import javax.swing.JOptionPane; import java.util.Arrays; import java.util.*; import java.util.ArrayList; import javax.swing.*; import javax.swing.AbstractButton; import javax.swing.JScrollPane; import javax.swing.JButton; import javax.swing.JPanel; import javax.swing.JFrame; import javax.swing.ImageIcon; import java.awt.*; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyEvent; /* * ButtonDemo.java requires the following files: * images/right.gif * images/middle.gif * images/left.gif */ public class StockTable extends JPanel implements ActionListener { static int multi = 1; int roll = 0; static TextVars textvars = new TextVars(); static final String[] browsers = { "firefox", "opera", "konqueror", "epiphany", "seamonkey", "galeon", "kazehakase", "mozilla", "netscape" }; JFrame frame; JPanel mainpanel, panel1, panel2, panel3, panel4, panel2left, panel2center, panel2right; JButton stknames_btn[] = new JButton[textvars.getNumberOfStocks()]; JLabel label[] = new JLabel[textvars.getNumberOfStocks()]; JLabel headlabel, dayspan, namelabel; JRadioButton radioButton; JButton button; JScrollPane scrollpane; int wid = 825; public JPanel createContentPane() { mainpanel = new JPanel(); mainpanel.setPreferredSize(new Dimension(wid, 800)); mainpanel.setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); panel1 = new JPanel(); panel1.setPreferredSize(new Dimension(wid, 25)); c.gridx = 0; c.gridy = 0; c.insets = new Insets(0,0,0,0); mainpanel.add(panel1, c); // Panel 2------------ panel2 = new JPanel(); panel2.setPreferredSize(new Dimension(wid, 51)); c.gridx = 0; c.gridy = 1; c.insets = new Insets(0,0,0,0); mainpanel.add(panel2, c); panel2left = new JPanel(); panel2left.setPreferredSize(new Dimension(270, 51)); c.gridx = 0; c.gridy = 1; c.insets = new Insets(0,0,0,0); panel2.add(panel2left, c); panel2center = new JPanel(); panel2center.setPreferredSize(new Dimension(258, 51)); c.gridx = 1; c.gridy = 1; c.insets = new Insets(0,0,0,0); panel2.add(panel2center, c); panel2right = new JPanel(); panel2right.setPreferredSize(new Dimension(270, 51)); c.gridx = 2; c.gridy = 1; c.insets = new Insets(0,0,0,0); panel2.add(panel2right, c); // ------------------ panel3 = new JPanel(); panel3.setLayout(new GridBagLayout()); scrollpane = new JScrollPane(panel3); scrollpane.setPreferredSize(new Dimension(wid, 675)); c.gridx = 0; c.gridy = 2; c.insets = new Insets(0,0,0,0); mainpanel.add(scrollpane, c); ImageIcon leftButtonIcon = createImageIcon("images/right.gif"); //b1 = new JButton("Disable middle button", leftButtonIcon); //b1.setVerticalTextPosition(AbstractButton.CENTER); //b1.setHorizontalTextPosition(AbstractButton.LEADING); //aka LEFT, for left-to-right locales //b1.setMnemonic(KeyEvent.VK_D); //b1.setActionCommand("disable"); //Listen for actions on buttons 1 //b1.addActionListener(this); //b1.setToolTipText("Click this button to disable the middle button."); //Add Components to this container, using the default FlowLayout. //add(b1); headlabel = new JLabel("hellorow1"); c.gridx = 0; c.gridy = 0; c.insets = new Insets(0, 0, 0, 0); panel1.add(headlabel, c); radioButton = new JRadioButton("Percentage"); c.gridx = 2; c.gridy = 0; c.insets = new Insets(0, 0, 0, 0); panel1.add(radioButton, c); radioButton = new JRadioButton("Days Range"); c.gridx = 3; c.gridy = 0; c.insets = new Insets(0, 0, 0, 0); panel1.add(radioButton, c); radioButton = new JRadioButton("Open / Close"); c.gridx = 4; c.gridy = 0; c.insets = new Insets(0, 0, 0,0 ); panel1.add(radioButton, c); button = new JButton("<<"); button.setPreferredSize(new Dimension(50, 50)); button.setActionCommand("reverse"); button.addActionListener(this); c.gridx = 0; c.gridy = 1; c.insets = new Insets(0, 0, 0, 0); panel2left.add(button, c); dayspan = new JLabel("hellorow2"); dayspan.setHorizontalAlignment(JLabel.CENTER); dayspan.setVerticalAlignment(JLabel.CENTER); dayspan.setPreferredSize(new Dimension(270, 50)); c.gridx = 1; c.gridy = 1; c.insets = new Insets(0, 0, 0, 0); panel2center.add(dayspan, c); button = new JButton(">>"); button.setPreferredSize(new Dimension(50, 50)); button.setActionCommand("advance"); button.addActionListener(this); if (multi == 0) { button.setEnabled(false); } else { button.setEnabled(true); } c.gridx = 2; c.gridy = 1; c.insets = new Insets(0, 0, 0, 0); panel2right.add(button, c); int availSpace_int = textvars.getStocks().size()-textvars.getNumberOfStocks()*7; ArrayList<String[]> stocknames = textvars.getStockNames(); ArrayList<String[]> stocks = textvars.getStocks(); for (int column = 0; column < 8; column++) { for (int row = 0; row < textvars.getNumberOfStocks(); row++) { if (column==0) { if (row==0) { namelabel = new JLabel(stocknames.get(0)[0]); namelabel.setVerticalAlignment(JLabel.CENTER); namelabel.setHorizontalAlignment(JLabel.CENTER); namelabel.setPreferredSize(new Dimension(100, 25)); c.gridx = column; c.gridy = row; c.insets = new Insets(0, 0, 0, 0); panel3.add(namelabel, c); } else { stknames_btn[row] = new JButton(stocknames.get(row)[0], leftButtonIcon); stknames_btn[row].setVerticalTextPosition(AbstractButton.CENTER); stknames_btn[row].setActionCommand(stocknames.get(row)[1]); stknames_btn[row].addActionListener(this); stknames_btn[row].setToolTipText("go to Google Finance "+stocknames.get(row)[0]); stknames_btn[row].setPreferredSize(new Dimension(100, 25)); c.gridx = column; c.gridy = row; c.insets = new Insets(0, 0, 0, 0); //scrollpane.add(stknames[row], c); panel3.add(stknames_btn[row], c); } } else { label[row]= new JLabel(textvars.getStocks().get(columnMulti(multi))[1]); label[row].setBorder(BorderFactory.createLineBorder(Color.black)); label[row].setVerticalAlignment(JLabel.CENTER); label[row].setHorizontalAlignment(JLabel.CENTER); label[row].setPreferredSize(new Dimension(100, 25)); c.gridx = column; c.gridy = row; c.insets = new Insets(0,0,0,0); panel3.add(label[row], c); } } } return mainpanel; } public void actionPerformed(ActionEvent e) { //System.out.println(e.getActionCommand()); if (e.getActionCommand().equals("advance")) { multi--; } else if (e.getActionCommand().equals("reverse")) { multi++; } else { openURL(e.getActionCommand()); } } /** Returns an ImageIcon, or null if the path was invalid. */ protected static ImageIcon createImageIcon(String path) { java.net.URL imgURL = StockTable.class.getResource(path); if (imgURL != null) { return new ImageIcon(imgURL); } else { System.err.println("Couldn't find file: " + path); return null; } } public static void openURL(String url) { String osName = System.getProperty("os.name"); try { if (osName.startsWith("Mac OS")) { Class<?> fileMgr = Class.forName("com.apple.eio.FileManager"); Method openURL = fileMgr.getDeclaredMethod("openURL", new Class[] {String.class}); openURL.invoke(null, new Object[] {url}); } else if (osName.startsWith("Windows")) { Runtime.getRuntime().exec("rundll32 url.dll,FileProtocolHandler " + url); } else { //assume Unix or Linux boolean found = false; for (String browser : browsers) if (!found) { found = Runtime.getRuntime().exec( new String[] {"which", browser}).waitFor() == 0; if (found) Runtime.getRuntime().exec(new String[] {browser, url}); } if (!found) throw new Exception(Arrays.toString(browsers)); } } catch (Exception e) { JOptionPane.showMessageDialog(null, "Error attempting to launch web browser\n" + e.toString()); } } int reit = 0; int start = textvars.getStocks().size()-((textvars.getNumberOfStocks()*5)*7)-1; public int columnMulti(int multi) { reit++; start++; if (reit == textvars.getNumberOfStocks()) { reit = 0; start=start+64; } //start = start - (multi*(textvars.getNumberOfStocks())); return start; } /** * Create the GUI and show it. For thread safety, * this method should be invoked from the * event-dispatching thread. */ private static void createAndShowGUI() { //Create and set up the window. JFrame frame = new JFrame("Stock Table"); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); //Create and set up the content pane. StockTable newContentPane = new StockTable(); //newContentPane.setOpaque(true); //content panes must be opaque //frame.setContentPane(newContentPane); frame.setContentPane(newContentPane.createContentPane()); frame.setSize(800, 800); //Display the window. frame.pack(); frame.setVisible(true); } public static void main(String[] args) { //Schedule a job for the event-dispatching thread: //creating and showing this application's GUI. javax.swing.SwingUtilities.invokeLater(new Runnable() { public void run() { createAndShowGUI(); } }); } }

    Read the article

  • Dynamic form in PHP not processing correctly

    - by user1497265
    My last question regarding this suggested I incorporate AJAX with PHP. However, I really wanted to try PHP exclusively for this project, and I seem to have made it about 95% there. I just need help on this one issue. Here's a quick background. My project requires a dynamic form to be populated with a max limit of 10 questions. Each form contains one question, one question number, and a text field. Students would go on and answer the questions. This is all driven by a database table (obviously), and when a question gets answered correctly, it will close and the next question in line will appear. There will always be 10 questions on the page. Here's how the coding looks, and it works perfectly. <? $rt = mysql_query("SELECT * FROM The_Questions WHERE Status='Open' ORDER BY 'Number' LIMIT 10"); while ($row = mysql_fetch_array($rt)) { $number=$row[0]; $category = $row[1]; $question=$row[2]; $points=$row[4]; $_SESSION['number'] = $number; ?> <form action="processor.php" method="post" class="qForm"> <div class="questionCell"> <div class="question"><? echo $number; echo $question ?></div> <div class="answer">Answer: <input class="inputField" name="q1" type="text" size="40" maxlength="40" /> <input name="HHQuestion" value="Submit" type="submit" /></div> </div> </form> <? } ?> The questions appear as they should, in the correct order, and the correct limit. Everything seems to be looking fine until a question gets answered and gets processed through the processor.php action. First here's the code to the processor.php file: <?php session_start(); if(isset($_POST["HHQuestion"])){ $dbhost = 'localhost'; $dbname = 'localhost'; $dbuser = 'localhost'; $dbpass = 'localhost'; $conn = mysql_connect($dbhost, $dbuser, $dbpass); mysql_select_db($dbname, $conn); { $number1 = $_SESSION['number']; $answer=$_POST['q1']; $sql="SELECT * FROM The_Questions WHERE Number='$number1'"; $result=mysql_query($sql); $row=mysql_fetch_array($result); $question = $row[2]; echo $question .'<br>'; echo $number1.'<br>'; echo $answer; } } ?> This is NOT live yet, and for testing purposes I'm echoing the question, question number, and answer (as you can see). What's happening is that the $question and $number1 displays the last question in the array (the $answer displays correctly, meaning it displays whatever was written in the dynamic form). Can anyone tell me why that is? If I change the LIMIT number to 20, the processor.php action will display the 20th question and number, even if I was answering question 8, for example, in the dynamic form. Again, the dynamic forms are being displayed correctly, and are numbered correctly. For some unknown reason to me, the action - processor.php - is grabbing the last question in the array. Any ideas on what I'm doing wrong? I'm hoping it's a simple code change that I'm overlooking. Thanks in advance guys!

    Read the article

  • Component returned failure code: 0x80600011 [nsIXSLTProcessorObsolete.transformDocument]

    - by Sean Ochoa
    So, I'm using the XSLT plugin for JQuery, and here's my code: function AddPlotcardEventHandlers(){ // some code } function reportError(exception){ alert(exception.constructor.name + " Exception: " + ((exception.name) ? exception.name : "[unknown name]") + " - " + exception.message); } function GetPlotcards(){ $("#content").xslt("../xml/plotcards.xml","../xslt/plotcards.xsl", AddPlotcardEventHandlers,reportError); } Here's the modified jquery plugin. I say that its modified because I've added callbacks for success and error handling. /* * jquery.xslt.js * * Copyright (c) 2005-2008 Johann Burkard (<mailto:[email protected]>) * <http://eaio.com> * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN * NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE * USE OR OTHER DEALINGS IN THE SOFTWARE. * */ /** * jQuery client-side XSLT plugins. * * @author <a href="mailto:[email protected]">Johann Burkard</a> * @version $Id: jquery.xslt.js,v 1.10 2008/08/29 21:34:24 Johann Exp $ */ (function($) { $.fn.xslt = function() { return this; } var str = /^\s*</; if (document.recalc) { // IE 5+ $.fn.xslt = function(xml, xslt, onSuccess, onError) { try{ var target = $(this); var change = function() { try{ var c = 'complete'; if (xm.readyState == c && xs.readyState == c) { window.setTimeout(function() { target.html(xm.transformNode(xs.XMLDocument)); if (onSuccess) onSuccess(); }, 50); } }catch(exception){ if (onError) onError(exception); } }; var xm = document.createElement('xml'); xm.onreadystatechange = change; xm[str.test(xml) ? "innerHTML" : "src"] = xml; var xs = document.createElement('xml'); xs.onreadystatechange = change; xs[str.test(xslt) ? "innerHTML" : "src"] = xslt; $('body').append(xm).append(xs); return this; }catch(exception){ if (onError) onError(exception); } }; } else if (window.DOMParser != undefined && window.XMLHttpRequest != undefined && window.XSLTProcessor != undefined) { // Mozilla 0.9.4+, Opera 9+ var processor = new XSLTProcessor(); var support = false; if ($.isFunction(processor.transformDocument)) { support = window.XMLSerializer != undefined; } else { support = true; } if (support) { $.fn.xslt = function(xml, xslt, onSuccess, onError) { try{ var target = $(this); var transformed = false; var xm = { readyState: 4 }; var xs = { readyState: 4 }; var change = function() { try{ if (xm.readyState == 4 && xs.readyState == 4 && !transformed) { var processor = new XSLTProcessor(); if ($.isFunction(processor.transformDocument)) { // obsolete Mozilla interface resultDoc = document.implementation.createDocument("", "", null); processor.transformDocument(xm.responseXML, xs.responseXML, resultDoc, null); target.html(new XMLSerializer().serializeToString(resultDoc)); } else { processor.importStylesheet(xs.responseXML); resultDoc = processor.transformToFragment(xm.responseXML, document); target.empty().append(resultDoc); } transformed = true; if (onSuccess) onSuccess(); } }catch(exception){ if (onError) onError(exception); } }; if (str.test(xml)) { xm.responseXML = new DOMParser().parseFromString(xml, "text/xml"); } else { xm = $.ajax({ dataType: "xml", url: xml}); xm.onreadystatechange = change; } if (str.test(xslt)) { xs.responseXML = new DOMParser().parseFromString(xslt, "text/xml"); change(); } else { xs = $.ajax({ dataType: "xml", url: xslt}); xs.onreadystatechange = change; } }catch(exception){ if (onError) onError(exception); }finally{ return this; } }; } } })(jQuery); And, here's my error msg: Object Exception: [unknown name] - Component returned failure code: 0x80600011 [nsIXSLTProcessorObsolete.transformDocument] Here's the info on the browser that I'm using for testing (with firebug v1.5.4 add-on installed): Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Here's my XML: <?xml version="1.0" encoding="ISO-8859-1"?> <plotcardCollection sortby="order"> <plotcard order="2" id="1378"> <name><![CDATA[[placeholder for name of plotcard 1378]]]></name> <content><![CDATA[[placeholder for content of plotcard 1378]]]></content> <tagCollection> <tag id="3"><![CDATA[[placeholder for tag with id=3]]]></tag> <tag id="7"><![CDATA[[placeholder for tag with id=7]]]></tag> </tagCollection> </plotcard> <plotcard order="1" id="2156"> <name><![CDATA[[placeholder for name of plotcard 2156]]]></name> <content><![CDATA[[placeholder for content of plotcard 2156]]]></content> <tagCollection> <tag id="2"><![CDATA[[placeholder for tag with id=2]]]></tag> <tag id="9"><![CDATA[[placeholder for tag with id=9]]]></tag> </tagCollection> </plotcard> </plotcardCollection> Here's my XSLT: <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:template match="/plotcardCollection"> <xsl:variable name="sortby" select="@sortby" /> <xsl:for-each select="plotcard"> <xsl:sort select="$sortby" data-type="number" order="ascending"/> <div> <!-- Start Plotcard --> <xsl:attribute name="class">Plotcard</xsl:attribute> <xsl:for-each select="@"> <xsl:value-of select="name()"/> <xsl:text>='</xsl:text> <xsl:if test="name() = 'id'"> <xsl:text>Plotcard-</xsl:text> </xsl:if> <xsl:value-of select="." /> <xsl:text>'</xsl:text> </xsl:for-each> <!-- Start Plotcard Name Section --> <div> <xsl:attribute name="class"> <xsl:text disable-output-escaping="yes">PlotcardName</xsl:text> </xsl:attribute> <xsl:value-of select="name/text()"/> </div> <!-- Start Plotcard Content Section --> <div> <xsl:attribute name="class"> <xsl:text disable-output-escaping="yes">PlotcardContent</xsl:text> </xsl:attribute> <xsl:value-of select="content/text()"/> </div> </div> </xsl:for-each> </xsl:template> </xsl:stylesheet> I'm really not sure what to do about this.... any thoughts?

    Read the article

  • ob_start() is partially capturing data

    - by AAA
    I am using the following code: PHP: // Generate Guid function NewGuid() { $s = strtoupper(uniqid(rand(),true)); $guidText = substr($s,0,8) . '-' . substr($s,8,4) . '-' . substr($s,12,4). '-' . substr($s,16,4). '-' . substr($s,20); return $guidText; } // End Generate Guid $Guid = NewGuid(); $alphabet = '123456789abcdefghijkmnopqrstuvwxyzABCDEFGHJKLMNPQRSTUVWXYZ'; function base_encode($num, $alphabet) { $base_count = strlen($alphabet); $encoded = ''; while ($num >= $base_count) { $div = $num/$base_count; $mod = ($num-($base_count*intval($div))); $encoded = $alphabet[$mod] . $encoded; $num = intval($div); } if ($num) $encoded = $alphabet[$num] . $encoded; return $encoded; } function base_decode($num, $alphabet) { $decoded = 0; $multi = 1; while (strlen($num) > 0) { $digit = $num[strlen($num)-1]; $decoded += $multi * strpos($alphabet, $digit); $multi = $multi * strlen($alphabet); $num = substr($num, 0, -1); } return $decoded; } ob_start(); echo base_encode($Guid, $alphabet); //should output: bUKpk $theid = ob_get_contents(); ob_get_clean(); The problem: When i echo $theid, it shows the complete entry, but as it is being inserted into the database, only the first entry in the sequence gets inserted, for example for the entry buKPK, only 'b' is being inserted not the rest.

    Read the article

  • Windows Build System: How to build a project (from its source code) which doesn't have *.sln or Visu

    - by claws
    I'm facing this problem. So, I need to build the support libraries (zlib, libtiff, libpng, libxml2, libiconv) with "Multithreaded DLL" (/MD) & "Multithreaded DLL Debug" (/MDd) run-time options. But the problem is there is no direct way . I mean there is no *.sln / *.vcproj file which I can open in Visual C++ and build it. I'm aware with the GNU build system: $./configure --with-all-sorts-of-required-switches $./make $./make install During my search I've encountered with something called CMake which generates *.vcproj & *.sln file but for that CMakeLists.txt is required. Not all projects provide CMakeLists.txt. I've never compiled anything from Visual C++ Command Line. Generally most projects provide makefile. Now how do I generate *.vcproj / *.sln from this? Can I compile with mingw-make of MinGW? If I can, how do I set different options ("Multi-Threaded"(/MT), "Multi-Threaded Debug"(/MTd), "Multi-Threaded DLL"(/MD), "Multi-Threaded DLL Debug"(/MDd)) for run-time libraries? I don't know what other ways are available. Please throw some light on this.

    Read the article

  • Parsing a JSON feed from YQL using jQuery

    - by Keith
    I am using YQL's query.multi to grab multiple feeds so I can parse a single JSON feed with jQuery and reduce the number of connections I'm making. In order to parse a single feed, I need to be able to check the type of result (photo, item, entry, etc) so I can pull out items in specific ways. Because of the way the items are nested within the JSON feed, I'm not sure the best way to loop through the results and check the type and then loop through the items to display them. Here is a YQL (http://developer.yahoo.com/yql/console/) query.multi example and you can see three different result types (entry, photo, and item) and then the items nested within them: select * from query.multi where queries= "select * from twitter.user.timeline where id='twitter'; select * from flickr.photos.search where has_geo='true' and text='san francisco'; select * from delicious.feeds.popular" or here is the JSON feed itself: http://query.yahooapis.com/v1/public/yql?q=select%20*%20from%20query.multi%20where%20queries%3D%22select%20*%20from%20flickr.photos.search%20where%20user_id%3D'23433895%40N00'%3Bselect%20*%20from%20delicious.feeds%20where%20username%3D'keith.muth'%3Bselect%20*%20from%20twitter.user.timeline%20where%20id%3D'keithmuth'%22&format=json&env=store%3A%2F%2Fdatatables.org%2Falltableswithkeys&callback=

    Read the article

  • txt file read/overwrite/append. Is this feasible? (Visual C#)

    - by Arcadian
    Hi, I'm writing a program for some data entry I have to periodically do. I have begun testing a few things that the program will have to do but i'm not sure about this part. What i need this part to do is: read a .txt file of data take the first 12 characters from each line take the first 12 characters from each line of the data that has been entered in a multi-line text box compare the two lists line by line if one of the 12 character blocks from the multi-line text box match one of the blocks in the .txt file then overwrite that entire line (only 17 characters in total) if one of the 12 character blocks from the multi-line text box DO NOT match any of the blocks in the.txt file then append that entire line to the file thats all it has to do. i'll do an example: TXT FILE: G01:78:08:32 JG05 G08:80:93:10 JG02 G28:58:29:28 JG04 MULTI-LINE TEXT BOX: G01:78:08:32 JG06 G28:58:29:28 JG03 G32:10:18:14 JG01 G32:18:50:78 JG07 RESULTING TXT FILE: G01:78:08:32 JG06 G08:80:93:10 JG02 G28:58:29:28 JG03 G32:10:18:14 JG01 G32:18:50:78 JG07 as you can see lines 1 and 3 were overwriten, line 2 was left alone as it did not match any blocks in the text box, lines 4 and 5 were appended to the file. thats all i want it to do. How do i go about this? Thanks in advance

    Read the article

  • C# 4: The Curious ConcurrentDictionary

    - by James Michael Hare
    In my previous post (here) I did a comparison of the new ConcurrentQueue versus the old standard of a System.Collections.Generic Queue with simple locking.  The results were exactly what I would have hoped, that the ConcurrentQueue was faster with multi-threading for most all situations.  In addition, concurrent collections have the added benefit that you can enumerate them even if they're being modified. So I set out to see what the improvements would be for the ConcurrentDictionary, would it have the same performance benefits as the ConcurrentQueue did?  Well, after running some tests and multiple tweaks and tunes, I have good and bad news. But first, let's look at the tests.  Obviously there's many things we can do with a dictionary.  One of the most notable uses, of course, in a multi-threaded environment is for a small, local in-memory cache.  So I set about to do a very simple simulation of a cache where I would create a test class that I'll just call an Accessor.  This accessor will attempt to look up a key in the dictionary, and if the key exists, it stops (i.e. a cache "hit").  However, if the lookup fails, it will then try to add the key and value to the dictionary (i.e. a cache "miss").  So here's the Accessor that will run the tests: 1: internal class Accessor 2: { 3: public int Hits { get; set; } 4: public int Misses { get; set; } 5: public Func<int, string> GetDelegate { get; set; } 6: public Action<int, string> AddDelegate { get; set; } 7: public int Iterations { get; set; } 8: public int MaxRange { get; set; } 9: public int Seed { get; set; } 10:  11: public void Access() 12: { 13: var randomGenerator = new Random(Seed); 14:  15: for (int i=0; i<Iterations; i++) 16: { 17: // give a wide spread so will have some duplicates and some unique 18: var target = randomGenerator.Next(1, MaxRange); 19:  20: // attempt to grab the item from the cache 21: var result = GetDelegate(target); 22:  23: // if the item doesn't exist, add it 24: if(result == null) 25: { 26: AddDelegate(target, target.ToString()); 27: Misses++; 28: } 29: else 30: { 31: Hits++; 32: } 33: } 34: } 35: } Note that so I could test different implementations, I defined a GetDelegate and AddDelegate that will call the appropriate dictionary methods to add or retrieve items in the cache using various techniques. So let's examine the three techniques I decided to test: Dictionary with mutex - Just your standard generic Dictionary with a simple lock construct on an internal object. Dictionary with ReaderWriterLockSlim - Same Dictionary, but now using a lock designed to let multiple readers access simultaneously and then locked when a writer needs access. ConcurrentDictionary - The new ConcurrentDictionary from System.Collections.Concurrent that is supposed to be optimized to allow multiple threads to access safely. So the approach to each of these is also fairly straight-forward.  Let's look at the GetDelegate and AddDelegate implementations for the Dictionary with mutex lock: 1: var addDelegate = (key,val) => 2: { 3: lock (_mutex) 4: { 5: _dictionary[key] = val; 6: } 7: }; 8: var getDelegate = (key) => 9: { 10: lock (_mutex) 11: { 12: string val; 13: return _dictionary.TryGetValue(key, out val) ? val : null; 14: } 15: }; Nothing new or fancy here, just your basic lock on a private object and then query/insert into the Dictionary. Now, for the Dictionary with ReadWriteLockSlim it's a little more complex: 1: var addDelegate = (key,val) => 2: { 3: _readerWriterLock.EnterWriteLock(); 4: _dictionary[key] = val; 5: _readerWriterLock.ExitWriteLock(); 6: }; 7: var getDelegate = (key) => 8: { 9: string val; 10: _readerWriterLock.EnterReadLock(); 11: if(!_dictionary.TryGetValue(key, out val)) 12: { 13: val = null; 14: } 15: _readerWriterLock.ExitReadLock(); 16: return val; 17: }; And finally, the ConcurrentDictionary, which since it does all it's own concurrency control, is remarkably elegant and simple: 1: var addDelegate = (key,val) => 2: { 3: _concurrentDictionary[key] = val; 4: }; 5: var getDelegate = (key) => 6: { 7: string s; 8: return _concurrentDictionary.TryGetValue(key, out s) ? s : null; 9: };                    Then, I set up a test harness that would simply ask the user for the number of concurrent Accessors to attempt to Access the cache (as specified in Accessor.Access() above) and then let them fly and see how long it took them all to complete.  Each of these tests was run with 10,000,000 cache accesses divided among the available Accessor instances.  All times are in milliseconds. 1: Dictionary with Mutex Locking 2: --------------------------------------------------- 3: Accessors Mostly Misses Mostly Hits 4: 1 7916 3285 5: 10 8293 3481 6: 100 8799 3532 7: 1000 8815 3584 8:  9:  10: Dictionary with ReaderWriterLockSlim Locking 11: --------------------------------------------------- 12: Accessors Mostly Misses Mostly Hits 13: 1 8445 3624 14: 10 11002 4119 15: 100 11076 3992 16: 1000 14794 4861 17:  18:  19: Concurrent Dictionary 20: --------------------------------------------------- 21: Accessors Mostly Misses Mostly Hits 22: 1 17443 3726 23: 10 14181 1897 24: 100 15141 1994 25: 1000 17209 2128 The first test I did across the board is the Mostly Misses category.  The mostly misses (more adds because data requested was not in the dictionary) shows an interesting trend.  In both cases the Dictionary with the simple mutex lock is much faster, and the ConcurrentDictionary is the slowest solution.  But this got me thinking, and a little research seemed to confirm it, maybe the ConcurrentDictionary is more optimized to concurrent "gets" than "adds".  So since the ratio of misses to hits were 2 to 1, I decided to reverse that and see the results. So I tweaked the data so that the number of keys were much smaller than the number of iterations to give me about a 2 to 1 ration of hits to misses (twice as likely to already find the item in the cache than to need to add it).  And yes, indeed here we see that the ConcurrentDictionary is indeed faster than the standard Dictionary here.  I have a strong feeling that as the ration of hits-to-misses gets higher and higher these number gets even better as well.  This makes sense since the ConcurrentDictionary is read-optimized. Also note that I tried the tests with capacity and concurrency hints on the ConcurrentDictionary but saw very little improvement, I think this is largely because on the 10,000,000 hit test it quickly ramped up to the correct capacity and concurrency and thus the impact was limited to the first few milliseconds of the run. So what does this tell us?  Well, as in all things, ConcurrentDictionary is not a panacea.  It won't solve all your woes and it shouldn't be the only Dictionary you ever use.  So when should we use each? Use System.Collections.Generic.Dictionary when: You need a single-threaded Dictionary (no locking needed). You need a multi-threaded Dictionary that is loaded only once at creation and never modified (no locking needed). You need a multi-threaded Dictionary to store items where writes are far more prevalent than reads (locking needed). And use System.Collections.Concurrent.ConcurrentDictionary when: You need a multi-threaded Dictionary where the writes are far more prevalent than reads. You need to be able to iterate over the collection without locking it even if its being modified. Both Dictionaries have their strong suits, I have a feeling this is just one where you need to know from design what you hope to use it for and make your decision based on that criteria.

    Read the article

  • How to safely reboot via First Boot script

    - by unixman
    With the cost and performance benefits of the SPARC T4 and SPARC T5 systems undeniably validated, the banking sector is actively moving to Solaris 11.  I was recently asked to help a banking customer of ours look at migrating some of their Solaris 10 logic over to Solaris 11.  While we've introduced a number of holistic improvements in Solaris 11, in terms of how we ease long-term software lifecycle management, it is important to appreciate that customers may not be able to move all of their Solaris 10 scripts and procedures at once; there are years of scripts that reflect fine-tuned requirements of proprietary banking software that gets layered on top of the operating system. One of these requirements is to go through a cycle of reboots, after the system is installed, in order to ensure appropriate software dependencies and various configuration files are in-place. While Solaris 10 introduced a facility that aids here, namely SMF, many of our customers simply haven't yet taken the time to take advantage of this - proceeding with logic that, while functional, without further analysis has an appearance of not being optimal in terms of taking advantage of all the niceties bundled in Solaris 11 at no extra cost. When looking at Solaris 11, we recognize that one of the vehicles that bridges the gap between getting the operating system image payload delivered, and the customized banking software installed, is a notion of a First Boot script.  I had a working example of this at one of the Oracle OpenWorld sessions a few years ago - we've since improved our documentation and have introduced sections where this is described in better detail.   If you're looking at this for the first time and you've not worked with IPS and SMF previously, you might get the sense that the tasks are daunting.   There is a set of technologies involved that are jointly engineered in order to make the process reliable, predictable and extensible. As you go down the path of writing your first boot script, you'll be faced with a need to wrap it into a SMF service and then packaged into a IPS package. The IPS package would then need to be placed onto your IPS repository, in order to subsequently be made available to all of your AI (Automated Install) clients (i.e. the systems that you're installing Solaris and your software onto).     With this blog post, I wanted to create a single place that outlines the entire process (simplistically), and provide a hint of how a good old "at" command may make the requirement of forcing an initial reboot handy. The syntax and references to commands here is based on running this on a version of Solaris 11 that has been updated since its initial release in 2011 (i.e. I am writing this on Solaris 11.1) Assuming you've built an AI server (see this How To article for an example), you might be asking yourself: "Ok, I've got some logic that I need executed AFTER Solaris is deployed and I need my own little script that would make that happen. How do I go about hooking that script into the Solaris 11 AI framework?"  You might start here, in Chapter 13 of the "Installing Oracle Solaris 11.1 Systems" guide, which talks about "Running a Custom Script During First Boot".  And as you do, you'll be confronted with command that might be unfamiliar to you if you're new to Solaris 11, like our dear new friend: svcbundle svcbundle is an aide to creating manifests and profiles.  It is awesome, but don't let its awesomeness overwhelm you. (See this How To article by my colleague Glynn Foster for a nice working example).  In order to get your script's logic integrated into the Solaris 11 deployment process, you need to wrap your (shell) script into 2 manifests -  a SMF service manifest and a IPS package manifest.  ....and if you're new to XML, well then -- buckle up We have some examples of small first boot scripts shown here, as templates to build upon. Necessary structure of the script, particularly in leveraging SMF interfaces, is key. I won't go into that here as that is covered nicely in the doc link above.    Let's say your script ends up looking like this (btw: if things appear to be cut-off in your browser, just select them, copy and paste into your editor and it'll be grabbed - the source gets captured eventhough the browser may not render it "correctly" - ah, computers). #!/bin/sh # Load SMF shell support definitions . /lib/svc/share/smf_include.sh # If nothing to do, exit with temporary disable completed=`svcprop -p config/completed site/first-boot-script-svc:default` [ "${completed}" = "true" ] && \ smf_method_exit $SMF_EXIT_TEMP_DISABLE completed "Configuration completed" # Obtain the active BE name from beadm: The active BE on reboot has an R in # the third column of 'beadm list' output. Its name is in column one. bename=`beadm list -Hd|nawk -F ';' '$3 ~ /R/ {print $1}'` beadm create ${bename}.orig echo "Original boot environment saved as ${bename}.orig" # ---- Place your one-time configuration tasks here ---- # For example, if you have to pull some files from your own pre-existing system: /usr/bin/wget -P /var/tmp/ $PULL_DOWN_ADDITIONAL_SCRIPTS_FROM_A_CORPORATE_SYSTEM /usr/bin/chmod 755 /var/tmp/$SCRIPTS_THAT_GOT_PULLED_DOWN_IN_STEP_ABOVE # Clearly the above 2 lines represent some logic that you'd have to customize to fit your needs. # # Perhaps additional things you may want to do here might be of use, like # (gasp!) configuring ssh server for root login and X11 forwarding (for testing), and the like... # # Oh and by the way, after we're done executing all of our proprietary scripts we need to reboot # the system in accordance with our operational software requirements to ensure all layered bits # get initialized properly and pull-in their own modules and components in the right sequence, # subsequently. # We need to set a "time bomb" reboot, that would take place upon completion of this script. # We already know that *this* script depends on multi-user-server SMF milestone, so it should be # safe for us to schedule a reboot for 5 minutes from now. The "at" job get scheduled in the queue # while our little script continues thru the rest of the logic. /usr/bin/at now + 5 minutes <<REBOOT /usr/bin/sync /usr/sbin/reboot REBOOT # ---- End of your customizations ---- # Record that this script's work is done svccfg -s site/first-boot-script-svc:default setprop config/completed = true svcadm refresh site/first-boot-script-svc:default smf_method_exit $SMF_EXIT_TEMP_DISABLE method_completed "Configuration completed"  ...and you're happy with it and are ready to move on. Where do you go and what do you do? The next step is creating the IPS package for your script. Since running the logic of your script constitutes a service, you need to create a service manifest. This is described here, in the middle of Chapter 13 of "Creating an IPS package for the script and service".  Assuming the name of your shell script is first-boot-script.sh, you could end up doing the following: $ cd some_working_directory_for_this_project$ mkdir -p proto/lib/svc/manifest/site$ mkdir -p proto/opt/site $ cp first-boot-script.sh proto/opt/site  Then you would create the service manifest  file like so: $ svcbundle -s service-name=site/first-boot-script-svc \ -s start-method=/opt/site/first-boot-script.sh \ -s instance-property=config:completed:boolean:false -o \ first-boot-script-svc-manifest.xml   ...as described here, and place it into the directory hierarchy above. But before you place it into the directory, make sure to inspect the manifest and adjust the appropriate service dependencies.  That is to say, you want to properly specify what milestone should be reached before your service runs.  There's a <dependency> section that looks like this, before you modify it: <dependency restart_on="none" type="service" name="multi_user_dependency" grouping="require_all"> <service_fmri value="svc:/milestone/multi-user"/>  </dependency>  So if you'd like to have your service run AFTER the multi-user-server milestone has been reached (i.e. later, as multi-user-server has more dependencies then multi-user and our intent to reboot the system may have significant ramifications if done prematurely), you would modify that section to read:  <dependency restart_on="none" type="service" name="multi_user_server_dependency" grouping="require_all"> <service_fmri value="svc:/milestone/multi-user-server"/>  </dependency> Save the file and validate it: $ svccfg validate first-boot-script-svc-manifest.xml Assuming there are no errors returned, copy the file over into the directory hierarchy: $ cp first-boot-script-svc-manifest.xml proto/lib/svc/manifest/site Now that we've created the service manifest (.xml), create the package manifest (.p5m) file named: first-boot-script.p5m.  Populate it as follows: set name=pkg.fmri value=first-boot-script-AT-1-DOT-0,5.11-0 set name=pkg.summary value="AI first-boot script" set name=pkg.description value="Script that runs at first boot after AI installation" set name=info.classification value=\ "org.opensolaris.category.2008:System/Administration and Configuration" file lib/svc/manifest/site/first-boot-script-svc-manifest.xml \ path=lib/svc/manifest/site/first-boot-script-svc-manifest.xml owner=root \ group=sys mode=0444 dir path=opt/site owner=root group=sys mode=0755 file opt/site/first-boot-script.sh path=opt/site/first-boot-script.sh \ owner=root group=sys mode=0555 Now we are going to publish this package into a IPS repository. If you don't have one yet, don't worry. You have 2 choices: You can either  publish this package into your mirror of the Oracle Solaris IPS repo or create your own customized repo.  The best practice is to create your own customized repo, leaving your mirror of the Oracle Solaris IPS repo untouched.  From this point, you have 2 choices as well - you can either create a repo that will be accessible by your clients via HTTP or via NFS.  Since HTTP is how the default Solaris repo is accessed, we'll go with HTTP for your own IPS repo.   This nice and comprehensive How To by Albert White describes how to create multiple internal IPS repos for Solaris 11. We'll zero in on the basic elements for our needs here: We'll create the IPS repo directory structure hanging off a separate ZFS file system, and we'll tie it into an instance of pkg.depotd. We do this because we want our IPS repo to be accessible to our AI clients through HTTP, and the pkg.depotd SMF service bundled in Solaris 11 can help us do this. We proceed as follows: # zfs create rpool/export/MyIPSrepo # pkgrepo create /export/MyIPSrepo # svccfg -s pkg/server add MyIPSrepo # svccfg -s pkg/server:MyIPSrepo addpg pkg application # svccfg -s pkg/server:MyIPSrepo setprop pkg/port=10081 # svccfg -s pkg/server:MyIPSrepo setprop pkg/inst_root=/export/MyIPSrepo # svccfg -s pkg/server:MyIPSrepo addpg general framework # svccfg -s pkg/server:MyIPSrepo addpropvalue general/complete astring: MyIPSrepo # svccfg -s pkg/server:MyIPSrepo addpropvalue general/enabled boolean: true # svccfg -s pkg/server:MyIPSrepo setprop pkg/readonly=true # svccfg -s pkg/server:MyIPSrepo setprop pkg/proxy_base = astring: http://your_internal_websrvr/MyIPSrepo # svccfg -s pkg/server:MyIPSrepo setprop pkg/threads = 200 # svcadm refresh application/pkg/server:MyIPSrepo # svcadm enable application/pkg/server:MyIPSrepo Now that the IPS repo is created, we need to publish our package into it: # pkgsend publish -d ./proto -s /export/MyIPSrepo first-boot-script.p5m If you find yourself making changes to your script, remember to up-rev the version in the .p5m file (which is your IPS package manifest), and re-publish the IPS package. Next, you need to go to your AI install server (which might be the same machine) and modify the AI manifest to include a reference to your newly created package.  We do that by listing an additional publisher, which would look like this (replacing the IP address and port with your own, from the "svccfg" commands up above): <publisher name="firstboot"> <origin name="http://192.168.1.222:10081"/> </publisher>  Further down, in the  <software_data action="install">  section add: <name>pkg:/first-boot-script</name> Make sure to update your Automated Install service with the new AI manifest via installadm update-manifest command.  Don't forget to boot your client from the network to watch the entire process unfold and your script get tested.  Once the system makes the initial reboot, the first boot script will be executed and whatever logic you've specified in it should be executed, too, followed by a nice reboot. When the system comes up, your service should stay in a disabled state, as specified by the tailing lines of your SMF script - this is normal and should be left as is as it helps provide an auditing trail for you.   Because the reboot is quite a significant action for the system, you may want to add additional logic to the script that actually places and then checks for presence of certain lock files in order to avoid doing a reboot unnecessarily. You may also want to, alternatively, remove the SMF service entirely - if you're unsure of the potential for someone to try and accidentally enable that service -- eventhough its role in life is to only run once upon the system's first boot. That is how I spent a good chunk of my pre-Halloween time this week, hope yours was just as SPARCkly^H^H^H^H fun!    

    Read the article

  • Hyper-V Server 2012 with Zambezi AMD FX-Series - Hardware assisted virtualization not present

    - by Vazgen
    I'm trying to set up VDI across Windows Server 2012 VMs running on Hyper-V 2012. The wizard's compatibility check for the Virtualization Host server failed with "Hardware-assisted virtualization is not present on the server". I'm running an FX-8120 CPU and have the ASUS M5A97 motherboard. I know I'm supposed to enable No-Execute (Hyper-V Hardware Considerations) but I cannot find that or any other synonyms of it in my motherboards UEFI BIOS (NX, XD, EVP, XN... nothing). I found this: PAE/NX/SSE2 Support Requirement Guide for Windows 8 which in short says "Windows 8 and Windows Server 2012 requires that systems must have processors that support NX, and NX must be turned on for important security safeguards to function effectively and avoid potential security vulnerabilities." this leads me to believe NX is on by default if I was able to get this far and install Hyper-V 2012 and Windows Server 2012.. Also I tried to disable AVX in cmd with "bcdedit /set xsavedisable 1". Did not resolve My processor is Zambezi FX-8120 and also supports RVI/SLAT/other synonym: processor: Newegg Processor FX-8120 support proof: AMD Processors with Rapid Virtualization Indexing Required to Run Hyper-V in Windows 8 What's going on here? I bought this CPU specifically after I had the same problems with an older AMD Athelon II and made sure to buy one with AMD-V and RVI. Thank you

    Read the article

  • Can I upgrade the CPU in my Lenovo 3000 N100 laptop?

    - by Pavel
    I've got an Intel Core Duo T2300 in my laptop (Lenovo 3000 N100, 0768-49G). Here is what I could find out about it: $ sudo dmidecode # dmidecode 2.11 SMBIOS 2.4 present. 42 structures occupying 1436 bytes. Table at 0x000DC010. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: LENOVO Version: 61ET37WW Release Date: 06/04/07 Address: 0xE6B70 [...] Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: LENOVO Product Name: CAPELL VALLEY(NAPA) CRB [...] Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: U2E1 Type: Central Processor Family: Other Manufacturer: Intel ID: E8 06 00 00 FF FB E9 BF Version: Genuine Intel(R) CPU T2300 @ 1.66GHz Voltage: 3.3 V External Clock: 166 MHz Max Speed: 2048 MHz Current Speed: 1600 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 14 model name : Genuine Intel(R) CPU T2300 @ 1.66GHz stepping : 8 microcode : 0x39 cpu MHz : 1000.000 cache size : 2048 KB I believe the chipset is "Mobile Intel 945GM Express", but I don't know how to verify it on a Linux system. I'm not sure about the socket, but Intel claims "Sockets Supported: PBGA479, PPGA478". Now, I'd like to upgrade to the fastest compatible CPU available, but I'm a bit lost in all the details. Can you guys help me out with a couple of questions, please? What CPUs can I choose from? (I think it's only the Core2Duo line, but it should be enough for an upgrade) Can I use a 64-bit CPU? Can I use a CPU with a higher FSB than 667 MHz? Do I have to worry about additional cooling, or is it enough to check for similar voltage/TDP values? Thank you!

    Read the article

  • Performance mitigations serving content from a UNC share via IIS 6

    - by codepoke
    I have a quad processor vmware instance running Windows 2003 and 1gb ethernet. I'm comparing serving the exact same heavy .NET 2.0 content from the local hard drive versus serving it from a UNC drive. If I use WCAT to load it down, I see about a 40% reduction in transactions/sec while serving from the UNC. Processor time barely moves from 45% and the NIC sits around 40% either way. I don't see any significant memory loading either way. Context Switches/Transaction, though, more than doubles when serving from the UNC. Pathlengths more than double as well, but I believe that's just an expression of the effect of context switching. All told, it looks like the bottleneck is processor switching while waiting on content from the UNC share. Is my experience about the norm? Is there some mitigation I might try? I twiddled HKLM\System\CurrentControlSet\Services\LanmanWorkstation\Parameters\MaxCmds a little bit per http://technet.microsoft.com/en-us/library/dd296694(WS.10).aspx, but to no obvious effect. I kind of doubt my problem is lack of connections, but rather just the act of switching from thread to thread while waiting on data.

    Read the article

  • Intel z77 vs h77 for intensive compiling, gaming [closed]

    - by Bilal Akhtar
    I'm in the market for a desktop motherboard (preferably ATX) that functions well with Intel i7-3770 Ivy Bridge processor at 3.4 GHz with LGA1155 socket. That processor is very fast, and it should handle all my tasks. My question is about the type of motherboard chipset I should choose to accompany it. I plan to use my rig for compiling and developing Debian package and other OS components, web development, occasional Android apps, chroots, VMs, FlightGear, other gaming but nothing serious, and heavy multitasking, all on Ubuntu. I do NOT plan to overclock, and I never will, so that's not a cause of concern for me. That said, I'm down to three chipset choices: Intel H77 Intel Z68 Intel Z77 I'm planning to go for H77 since I don't need any of the new features in Z77. I don't plan to use a second GPU and I will never overclock my CPU/GPU. My question is, will H77 based MoBos handle all my tasks well? Intel advertises that chipset as "everyday computing" but other sites say it's base functionality is the same as Z77. Intel rather advertises Z77 for "serious multitaskers, hardcore gamers and overclocking enthusiasts". But the problem with all Z77 motherboards I've seen is, they're way too expensive and their main feature seems to be overclocking, which won't be useful to me. Will I lose any raw CPU/GPU performance or HDD R/w with the H77 when comparing it to a Z77? Will heat, etc be an issue too? From what I've seen, Z77 motherboards have larger heat sinks when compared to H77 ones. Will that be an issue too, if I go with an H77 motherboard with no heat sinks for the chipset? The CPU will have a fan in both cases, of course. tl;dr When it comes to CPU/GPU performance and HDD r/w, is the Intel H77 chipset slower than the Z77? I don't care about overclocking or multiple GPUs, and for the processor, I'm set on Ivy Bridge i7-3770.

    Read the article

  • cisco 2900xl - SNMP - Get mac address of device connected to an interface

    - by ankit
    Hello all, Basically what i want to do is to find out what is the mac address of a device plugged in to an interface on the switch (FastEthernet0/1 for example) reading through the switch documentaion i found out that i can configure snmp trap on it to make it notify of any new mac address the switch detects by using the command snmp-server enable traps mac-notifiction but for some reason my switch does not support this feature. the only options i see are CORE_SWITCH(config)#snmp-server enable traps ? c2900 Enable SNMP c2900 traps cluster Enable Cluster traps config Enable SNMP config traps entity Enable SNMP entity traps hsrp Enable SNMP HSRP traps snmp Enable SNMP traps vlan-membership Enable VLAN Membership traps vtp Enable SNMP VTP traps <cr> so the other way would be for me to run a cronjon on my gateway to poll the switch periodically using snmp to get new mac addresses i have looked everywhere but cant seem to find the OID that would provide me this information. any help i can get would me very much appreciated ! here's the output from "show version" on my switch Cisco Internetwork Operating System Software IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5.4)WC(1), MAINTENANCE INTERIM SOFTWARE Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Tue 10-Jul-01 11:52 by devgoyal Image text-base: 0x00003000, data-base: 0x00333CD8 ROM: Bootstrap program is C2900XL boot loader CORE_SWITCH uptime is 1 hour, 24 minutes System returned to ROM by power-on System image file is "flash:c2900XL-c3h2s-mz.120-5.4.WC.1.bin" cisco WS-C2912-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K bytes of memory. Processor board ID FAB0409X1WS, with hardware revision 0x01 Last reset from power-on Processor is running Enterprise Edition Software Cluster command switch capable Cluster member switch capable 12 FastEthernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:01:42:D0:67:00 Motherboard assembly number: 73-3397-08 Power supply part number: 34-0834-01 Motherboard serial number: FAB040843G4 Power supply serial number: DAB05030HR8 Model revision number: A0 Motherboard revision number: C0 Model number: WS-C2912-XL-EN System serial number: FAB0409X1WS Configuration register is 0xF thanks, -ankit

    Read the article

  • JBoss 5 on AIX 5.3

    - by jess
    I am a very newbie for AIX and system monitoring. Actually our application currently run production on jboss 5.1 in AIX 5.3. Please check below configuration & system settings. AIX system configuration OS Level 5.3.9.0 (oslevel -g) Physical Memory size 24GB (svmon -G) Page space 4GB (lsps -s) processors 3 cores, Processor Type: PowerPC_POWER6, Processor Clock Speed: 4704 MHz (prtconf | grep Processor) Java version JRE 1.6.0 IBM AIX build pap6460sr10fp1-20120321_01 (SR10 FP1) (java -fullversion) JBoss configuration JBoss 5.1/JBoss ESB 4.11 Hornetq messaging with consumer flow control java opts : -d64 -Xms2g -Xmx4g -XX:MaxPermSize=1024m Sometime we observe very strange behavior in the JBoss that freeze without any error logs. Also server log stop without any further trace. We also not able to get thread dump (kill -3) and its not generate at that point. (kill -3 xxxxx works in normal circumstances) Only option available for us was restart the jboss server and its seem all messages that were in queues during the freeze time process after restarting. We try tweak some of setting in JBoss hornetq, we though issue was there. Hornetq Stuck By Default. But we haven't any luck and also unable to isolate the issue in any point. We looking at tool like nmon for monitoring this but no clue is that good enough to do so. Please provide some point to investigate this issue. Thanks

    Read the article

  • Why Virtual Box won't give me option to create 64 bits guests?

    - by Eduardo Born
    My host is x64 bits Windows 8.1. I downloaded the latest Virtual Box (4.3) and I'm trying to create a VM with a 64 bits Ubuntu OS (ubuntu-12.04.3-desktop-amd64). When I go to New VM wizard, it doesn't give me option to select "Ubuntu (x64)" as I have seen in other people's screenshots, only just "Ubuntu". As a result, the ISO can't boot. I tried in another PC and Virtual Box gives the x64 variants to most listed OS... Control Panel shows x64 OS, x64 processor. My host laptop is a Sony Vaio VPCZ22UGX/N, Intel® Core™ i7-2640M processor. CPUz shows Vx-t is available on my processor, of course. Here is what I tried so far: I enabled IO APIC as required in the docs. I have virtualization enabled in the BIOS. It works fine in VMware. Check that Hyper-V is not running or even installed on my Windows. Same for VMware. I also tried running the command: VBoxManage modifyvm [vmname] --longmode on for that VM, but no change.. I think the issue is really that I can't select x64 variant of the Ubuntu OS for that VM. Other people seem to indicate that's a requirement, but I don't get that option for some reason. I spent a lot of time and can't find what's wrong... Anyone knows what could be missing here? Thank you very much!! Eduardo

    Read the article

  • Cisco Catalyst 4500 Policy Based Routing

    - by Logan
    In order to test a new firewall I just set up I'm trying to implement policy based routing on our core switch. I want traffic from certain vlans to be routed to the new firewall while everything else continues being routed through the old firewall. I was trying to use this guide. Everything from that guide works fine except trying to run the "ip policy route-map" command in the interface configuration mode. IOS is telling me that such a command doesn't exist. A "show ip interface vlan" command says that policy routing is disabled. Any ideas? Output of "show ver": Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASEK9-M), Version 12.2(53)SG, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Thu 16-Jul-09 19:49 by prod_rel_team Image text-base: 0x10000000, data-base: 0x11D1E3CC ROM: 12.2(31r)SG2 Dagobah Revision 226, Swamp Revision 34 RTTMCB2223-1 uptime is 3 years, 22 weeks, 2 days, 19 hours, 28 minutes Uptime for this control processor is 51 weeks, 2 days, 18 hours, 2 minutes System returned to ROM by power-on System restarted at 19:22:02 UTC Tue Jul 12 2011 System image file is "bootflash:cat4500-ipbasek9-mz.122-53.sg.bin" ... cisco WS-C4510R (MPC8245) processor (revision 4) with 524288K bytes of memory. Processor board ID FOX103703W3 MPC8245 CPU at 400Mhz, Supervisor V Last reset from PowerUp 42 Virtual Ethernet interfaces 244 Gigabit Ethernet interfaces 511K bytes of non-volatile configuration memory. Configuration register is 0x2

    Read the article

  • Can anyone explain these differences between two similar i7 processors? [closed]

    - by Brian Frost
    I have two systems I've just built. They both have i7 processors and Asus P8Z77 motherboards. When I run a simple processor loop benchmark that I wrote in Delphi some time back I get one machine showing nealry twice as fast as the other. I then used CPU-Z to dump me the details of the hardware and I see that the fast machine shows: Processor 1 ID = 0 Number of cores 4 (max 8) Number of threads 8 (max 16) Name Intel Core i7 2700K Codename Sandy Bridge Specification Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz Package (platform ID) Socket 1155 LGA (0x1) CPUID 6.A.7 Extended CPUID 6.2A Core Stepping D2 Technology 32 nm TDP Limit 95 Watts Core Speed 3610.7 MHz Multiplier x FSB 36.0 x 100.3 MHz Stock frequency 3500 MHz the slow machine shows: Processor 1 ID = 0 Number of cores 4 (max 8) Number of threads 8 (max 16) Name Intel Core i7 2600K Codename Sandy Bridge Specification Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz Package (platform ID) Socket 1155 LGA (0x1) CPUID 6.A.7 Extended CPUID 6.2A Core Stepping D2 Technology 32 nm TDP Limit 95 Watts Core Speed 1648.2 MHz Multiplier x FSB 16.0 x 103.0 MHz Stock frequency 3400 MHz i.e the slow machine has a 2600k to the fast machine 2700k. The very different "Multiplier x FSB" must be significant but I dont understand how two processors with a very 'similar' number can be so different. To get the machines the same must I copy the processors or is there some clever setting that I can change? Thanks for any help. Brian.

    Read the article

  • Troubleshooting a Windows 7 PC that wouldn't sleep

    - by NPE
    I have a new Windows 7 PC that wouldn't sleep (not just automatically, but also when specifically told to). The screen goes black momentarily, but within two seconds the machine comes back as if nothing has happened. I tried powercfg energy. This produces some errors quoted at the bottom of this post, plus some warnings about timer resolution. There are no USB devices connected other than wireless keyboard + mouse (Logitech MK250); I tried unplugging them to no effect. The motherboard is Asus P7P55D-E. powercfg lastwake says "Wake History Count - 0", which I take to mean that it never actually went to sleep. I dual boot into Ubuntu, and was having exactly the same problem on the Linux side. That turned out to do with USB 3.0, which I've now disabled in the BIOS. This has solved the problem on the Ubuntu side of things, but made no difference to Windows 7. Any suggestions? Suspend:USB Device not Entering Suspend The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use. Device Name Generic USB Hub Host Controller ID PCI\VEN_8086&DEV_3B34 Host Controller Location PCI bus 0, device 29, function 0 Device ID USB\VID_8087&PID_0020 Port Path 1 USB Suspend:USB Device not Entering Suspend The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use. Device Name USB Root Hub Host Controller ID PCI\VEN_8086&DEV_3B34 Host Controller Location PCI bus 0, device 29, function 0 Device ID USB\VID_8086&PID_3B34 Port Path USB Suspend:USB Device not Entering Suspend The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use. Device Name USB Composite Device Host Controller ID PCI\VEN_8086&DEV_3B34 Host Controller Location PCI bus 0, device 29, function 0 Device ID USB\VID_046D&PID_C52E Port Path 1,8

    Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >