Search Results

Search found 47660 results on 1907 pages for 'name resolution'.

Page 83/1907 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

• Sending cron output to a file with a timestamp in its name

  - by Philip Morton

  I have a crontab like this on a LAMP setup: 0 0 * * * /some/path/to/a/file.php > $HOME/cron.log 2>&1 This writes the output of the file to cron.log. However, when it runs again, it overwrites whatever was previously in the file. How can I get cron to output to a file with a timestamp in its filename? An example filename would be something like this: 2010-02-26-000000-cron.log I don't really care about the format, as long as it has a timestamp of some kind. Thanks in advance.

  Read the article

• mod_rewrite to capture subdomain name

  - by Ricky

  I want to write a rewrite scheme such that: user1.example.net will redirect to example.net/user/user1 user2.example.net will redirect to example.net/user/user2 vise versa this is what i have in my .htaccess code. but it always redirects to example.net RewriteCond %{http_host} ^[^.]+.example.net [NC] RewriteRule ^([^.]+).example.net(.*) http://example.net/user/$1 [R=301,L] can someone please tell me what i did wrong? thank you.

  Read the article

• Can SPF records contain domain name wildcards?

  - by deltanovember

  Part of my SPF record contains: include:google.com I'm still getting soft fail because the actual e-mail is delivered by the following Received: from mail-yx0-f172.google.com (mail-yx0-f172.google.com [209.85.213.172] Which has a completely different IP from google.com. However I don't want to put in mail-yx0-f172.google.com because it might be dynamic. Is there some equivalent of *.google.com that I can use in the record

  Read the article

• apache name virtual host - two domains and SSL

  - by Tom

  I'm trying to setup Apache(2.2.3) to run two websites with SSL using both different domains and IP addresses. Both websites run fine on port 80 but when I tried to enable SSL for website2 I get a ssl_error_bad_cert_domain error; website2 picks up the SSL cert for website1. Here is my setup in httpd.conf: # Website1 NameVirtualHost 192.168.10.1:80 <VirtualHost 192.168.10.1:80> DocumentRoot /var/www/html ServerName www.website1.org </VirtualHost> NameVirtualHost 192.168.10.1:443 <VirtualHost 192.168.10.1:443> SSLEngine On SSLCertificateFile conf/ssl/website1.cer SSLCertificateKeyFile conf/ssl/website1.key </VirtualHost> # Website2 NameVirtualHost 192.168.10.2:80 <VirtualHost 192.168.10.2:80> DocumentRoot /var/www/html/chart ServerName www.website2.org </VirtualHost> NameVirtualHost 192.168.10.2:443 <VirtualHost 192.168.10.2:443> SSLEngine On SSLCertificateFile conf/ssl/website2.cer SSLCertificateKeyFile conf/ssl/website2.key </VirtualHost> Update: In answer to Shane (this wouldn't fit in comment box) here is the output from apachectl -S: VirtualHost configuration: 192.168.10.2:80 is a NameVirtualHost default server www.website2.org (/etc/httpd/conf/httpd.conf:1033) port 80 namevhost www.website2.org (/etc/httpd/conf/httpd.conf:1033) 192.168.10.2:443 is a NameVirtualHost default server bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1040) port 443 namevhost bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1040) 192.168.10.1:80 is a NameVirtualHost default server www.website1.org (/etc/httpd/conf/httpd.conf:1017) port 80 namevhost www.website1.org (/etc/httpd/conf/httpd.conf:1017) 192.168.10.1:443 is a NameVirtualHost default server bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1024) port 443 namevhost bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1024) wildcard NameVirtualHosts and _default_ servers: _default_:443 192.168.10.1 (/etc/httpd/conf.d/ssl.conf:81) Syntax OK

  Read the article

• IMAP can't access virtual account sharing name with local user account

  - by chernevik

  I am setting up a postfix/dovecot mail server with virtual accounts, per the Chris Haas tutorial. I'm finding that virtual users who also have local user accounts on the mail server cannot access their email remotely via IMAP. They're told they cannot login. (I'm using Thunderbird for that). These same users can login when emulating IMAP locally via telnet. Virtual users without local accounts have no trouble with IMAP access from remote clients. These local user accounts have vestiges of prior efforts in their home directories: mbox files, Mail and mail directories. I've looked at the logs for clues to where the remote login process is failing (dovecot authentication failure? confusion over where emails are stored?) but found nothing helpful. I haven't found much in the dovecot or postfix documentation that describes the IMAP login process and expectations in enough detail to help me diagnose this. So: how do I go about identifying the problem and researching a solution?

  Read the article

• Is there a way to use something similar to a capture group for apache2 server name

  - by Zipper

  I have a server that sits behind an AWS load balancer. The LB can't do automatic redirect from HTTP to HTTPs, and the LB is doing my SSL. So I need to setup apache on my servers to redirect any request on port 80 to https://FOOBAR m where FOOBAR is the domain that came in. I haven't been able to find a way of doing that so far. I'm an apache newb though. What I'm trying to do is something similar to this. I'll use regex as an example <VirtualHost *:80> ServerName (.*) Redirect / https://\1 </VirtualHost> If there's a better way to do this, please let me know. EDIT: Sorry I should have explained why this is happening. I actually have a tomcat server running my app on port 8080, and the LB points to that. From what I can tell so far my requests come in on http (which is expected), but when my app server sends redirects (for login purposes) it tries to redirect to http, instead of https. I haven't had a chance to fully investigate this, but I wanted to work around it for now by point the LB to point to the apache server, and have any port 80 requests redirect to 443. EDIT2: The other reason I'm interested in doing this, is that since the LB can't do the redirect, I need to have another redirect mechanism in place to tell the browser to go to https://FOOBAR

  Read the article

• windows 7 issues with local domain name

  - by Phill

  Until recently my operating system was XP where for the purpose of development and testing of php and zen cart I set up xampp that included apache http server and mercury mail server I also made changes to C:\Windows\System32\drivers\etc\hosts as follows: 127.0.0.1 www.zen.com # For browser access 127.0.0.1 mail.mercury.com # For email access 127.0.0.1 mercury.com # For mercury mail server This allowed the use of www.zen.com in the address bar of my browser rather than 'localhost' and mail.mercury.com to access email via thunderbird. All was well. Then I installed windows7, I made all the mods and again everything appeared to run as expected.Then I turned off my wireless modem causing all working local connections to fail. Localhost in the address bar still works but not www.zen.com and thunderbird 'cannot find mail.mercury.com' Is there some way to overcome what ever is causing this.

  Read the article

• file-name encoding problems

  - by tenhouse

  I googled over this topic but couldn't find what I was looking for... the following "happend" to me: I had my files stored on a NTFS-USB Harddisk, because of space problems I moved them to an ext3 system....somehow the filename (content is still ok as far as I saw) encoding screwed up....my files look like the following now: Kküken <--- should have an "ü" Jäger <--- should be an "ä" Zwölf <--- should be an "ö" fünfte <-- should be an "ü" etc .... These are just examples, but already give me my first question Why has the "ü" two different representations? (Maybe I screw up, before I screw up and now I have a mixing of x different encoding-layers? :) ) I tried the following command: convmv -r -f UTF-8 -t ISO-8859-1 * This command work for some files (for example Zwölf) but not for all: iso-8859-1 doesn't cover all needed characters for: "fünfte" So Iguess it must be another encoding - but which? How can I find out this? And is there any way that I can still fix all of this?

  Read the article

• Font name used in files shared between OSX and Windows

  - by Paul

  Our designer uses OSX, and creates InDesign or AI files. They are then passed to us for changes. When we open the files on Windows, we are told that fonts are missing. In this example, the Futura font is being used. The Windows machine has Futura installed, from BitStream. The nane of the font is "Futura Std", whereas on OSX, it is simply Futura. So InDesign chooses a random font to substitute Futura with on Windows, it does not choose Futura Std. Now we can use the Find Font feature, and change all the instances of "Futura" to "Futura Std", but if we pass the file back to the designer, they have to then do the reverse. What is the right way for managing this?

  Read the article

• Bash: Variable substitution in variable name with default value

  - by krissi

  i have the following variables: # config file MYVAR_DEFAULT=123 MYVAR_FOO=456 #MYVAR_BAR unset # program USER_INPUT=FOO TARGET_VAR=<need to be set> If the USER_INPUT is "foo", I want TARGET_VAR to be the value of MYVAR_FOO (TARGET_VAR=456). If USER_INPUT is "bar" I want TARGET_VAR to be set to MYVAR_DEFAULT (123), because MYVAR_BAR is unset. I prefer it to be sh-compatible and as a substitution string. But it might also be bash compatible and/or in a function. I got these snippets: # Default values for variable (sh-compatible) echo ${MYVAR_FOO-$MYVAR_DEFAULT} # Uppercase (bash compatible) echo ${USER_INPUT^^} I would need something like this: TARGET_VAR="${MYVAR_${USER_INPUT^^}-$MYVAR_DEFAULT}" # or somecommand -foo "${MYVAR_${USER_INPUT^^}-$MYVAR_DEFAULT}" This is to switch a bunch of variables between multiple "profiles". In the example, FOO and BAR are profiles. New profiles should be added easily, in this example there would be an implicit profile named BAZ, too, all variables to their default values. Unfortunately it is not that easy. Do you have an idea to solve this? Thanks in advance, krissi

  Read the article

• What are some good Server Name Themes/Categories [duplicate]

  - by Arian

  This question already has an answer here: What are the most manageable and interesting server naming schemes being used? [closed] 17 answers I need to create a naming scheme for my servers, but I am having a hard time come by a good category list to go by. I want something with an abundance of names to use, so as I scale my server count I won't run out. Some that I have heard being used is greek philosophers (plato) planet names (saturn, mercury, venus, mars) Mario Characters (mario, luigi, yoshi, toad) I feel like the above categories are kind of limited. What are some good naming scheme that you use?

  Read the article

• MySQL Workbench sends computer name with login not IP

  - by Android Addict

  I am attempting to connect MySQLWorkbench to a remote MySQL Server. The server has granted access to user@IPAddress However, when I try to connect MySQLWorkbench, it sends user@computername instead. How do I configure the connection to use the IP address instead in MySQLWorkbench? Reference: The remote server is on the local network, so I need to use the local IP address assigned to my client. EDIT What I have tried so far: from the server: mysql -u user@IPAddress -p --host=(ServerIPAddress) Returns: mysql> So that tells me the user account is operational. Furthermore, I confirmed it exists using: select user from mysql.user; returning a table of all users, of which the user I am using is present. I have also opened the port 3306: sbin/iptables -A INPUT -i eth0 -s clientIPAddress -p tcp --destination-port3306 -j ACCEPT Still I encounter Access Denied

  Read the article

• Using standard e-mail address as user system wide name

  - by PeterMmm

  I'm going to re-build a very old Lotus Notes infrastructure coming from 4.x towards 8.5. I'm trying to setup Domino so that all user names should be of a single string or the internet e-mail address. For example the user "John Smith/ACME" should be in the whole system jsmith or [email protected] . I still get jsmith/ACME all around. Where it is most annoying is in the NAB when creating a new message. Is there a way to get all addresses in uniform standard e-mail adress format at least in mail ? The mixup in the destination like "John Smith/ACME, [email protected]" confused the users.

  Read the article

• Excael 2007: Name range problems when linking workbooks

  - by Mike

  I've 30+ workbooks each with 5 specific worksheets (formated the same). Each worksheet's data needs to be linked to a master workbook, so that I end up with 5 master workbooks and all the specific data in one long table format $A$2:$I$750. (Are you still with me? ;)) I don't have access to a database, so I'm having to link the sheets to their master workbook directly. I've highlighted the data I need; named the range; and then tried referencing this from my master workbook. I get the #Value error symbol when I try to link (=[WorkbookName]!MyNamedRange) to a cell that doesn't match the top left cell of my range. Example: MyNamedrange is always =$A$2:$I43$ on one specific sheet. On my master workbook it works if it's referenced at A2 but I get #Value if it's referenced A1, or A44. Any ideas? I'm trying to link my data in one continous table so I can run a pivot on it, and other things. Can it be done like this, or should I just copy and paste? I'm trying to keep things 'linked'so I do not need to spend time C&Ping all day. Many thanks Mike.

  Read the article

• (Zywall USG 300) NAT bypassed when accessing in-house-server From LAN Via domain name

  - by mschr

  My situations is like this; i host a number of websites from within our joint network solution. On the network is basically 3 categories: the known public, registered via mac, given static dhcp lease the anonymous lan connections, given lease from specific dhcp range switches, unix hosts firewall Now, consider following hosts which are of interest 111.111.111.111 (Zywall USG 300 WAN) 192.168.1.1 (ZyWall USG 300 LAN) load balances and bw monitors plus handles NAT 192.168.1.2 (Linux www) serves mydomain1.tld and mydomain2.tld 192.168.123.123 (Random LAN client) accesses mydomain1.tld from LAN 23.234.12.253 (Random External client) accesses mydomain1.tld via WAN DNS A records are setup so that both mydomain1.tld and mydomain2.tld points to 111.111.111.111 - and the Linux www serves the http parts with VirtualHost configurations, setting up the document roots pr ServerName, this is not so interesting though.. NAT rule translates 111.111.111.111:80 to 192.168.1.2:80 (1:1 NAT) Our problem follows; When accessing http://mydomain1.tld from outside (23.234.12.253 example host) the joint network - everything is fine, zywall receives requests via port 80 and maps it to the linux host' httpd. However - once trying to go through the NAT from LAN side (in-house, 192.168.123.123 example host) then one gets filtered in the Zywall port 80 firewall. I know this only because port 443 is open for administration interface and https://mydomain1.tld prompts for zywall login. So my conclusion is, that the LAN that accesses 111.111.111.111 in fact are routed to 192.168.1.1 whilst bypassing the NAT table. I need to know how to setup NAT / Policy Route, so that LAN WAN LAN will function with proper network translations instead of doing the 'quick nameserver lookup' or whatever this might be.

  Read the article

• Ping server NETBIOS name returns wrong IP and "Destination host unreachable"

  - by music2myear

  Problem server is Windows 2008 R2 VM running on VMWare ESXi 4 host. Single network adapter manually assigned single IP address (192.168.1.11). When I ping the server from any other network computer, it returns 192.168.1.124 and "Destination host unreachable". Yesterday I found a second network adapter assigned to this server with an IP of 169.254... indicating it had no real valid IP. Using the MAC addresses I determined which adapter was not needed/not wanted, and removed it using VMWare systems. This is the network Printer Server and, understandably, nothing is printing right now. I've looked at the solutions here Why was my ping answered by a different IP address than the one pinged? and they aren't applicable to my situation for the following reasons: Output of arp -a on another computer returns the correct IP address (.1.11) assigned to the correct MAC address, the incorrect IP .1.124 is not listed, and the MAC of the network adapter I removed yesterday is not listed at all. I checked out the Microsoft KB article which listed pretty much my exact symptoms ( http://support.microsoft.com/kb/981953 ) and it says to check binding orders and look for hidden adapters. But there are no hidden adapters, and there is only one Network Adapter listed in the Binding Order list. Essentially, I can communicate from the server TO any other network device, but I cannot communicate from any other network device TO the server. Help! UPDATE: Solution found, see this solution for the details.

  Read the article

• odd system name showing up in terminal

  - by sam

  Ive been working on some command line stuff with an external developer through team viewer for work, to interact with th CL i use terminal on OSX, when working with the developer i was always watching what they were doing and i also have all the bash history. Usually upon opening terminal i get something like this Last login: Tue Sep 17 21:33:02 on ttys001 You have mail. unknown-5c:00:00:00:00:00:~ sam$ (note ive replaced some characters in the last line with 00) But today when i opened up terminal and i get this Last login: Mon Oct 21 16:49:35 on ttys000 You have mail. richies-ipad:~ sam$ Note it now says richies-ipad - any idea why this is ? I dont know any one called richie let alone let them have access to my machine. Is this something to be worried about - the fact that someone has enough access to change that ? Also what does the ttys001 part on the first line mean ?

  Read the article

• DNS name not on cert

  - by blsub6

  I've got an interesting one... My users have always typed in 'mail' to get to their mail. There was an internal DNS A record that resolved that to the IP of the mail server. I'm putting in an Exchange server to replace that. In order for people to get their mail, I try putting in an A record that does the same thing as the previous one. When I try to get to OWA, it tells me that the certificate on the server is not trusted. I only have the names: mail.mydomain.com autodiscover.mydomain.com autodiscover.mydomain.internal mydomain.internal mailserver.mydomain.internal so when the browser sees that this cert is trying to cover https://mail/owa it says the cert's not trusted. What amy I supposed to do about that?

  Read the article

• .htaccess: Transparently adding a name to the request

  - by Jon

  I've read this tutorial about how to modify your .htaccess in order to server many web2py applications but it doesn't seem to work. Here is my .htaccess RewriteEngine On RewriteRule ^dispatch\.fcgi/ - [L] RewriteRule ^(.*)$ dispatch.fcgi/$1 [L] RewriteCond %{HTTP_HOST} =www.moublemouble.com [NC, OR] RewriteCond %{HTTP_HOST} =moublemouble.com [NC] RewriteRule ^/(.*) /moublemouble/$1 [PT,L] All I get is a 500 Internal Error and .htaccess is not my strong point. Any clues?

  Read the article

• Problem about IP and computer name in Ubuntu

  - by bugbug

  I can't connect to mysql database becase it alway change 192.168.1.101 to ubuntu.local. $ mysql -uroot -padmin1234 -h192.168.1.101 ERROR 1045 (28000) : Access denined for user 'root'@'ubuntu.local' (using password: YES) How do I solve this problem. File: /etc/hosts in this machine 127.0.0.1 localhost 127.0.1.1 ubuntu.ubuntu-domain ubuntu # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts I have no idea about "root'@'ubuntu.local", where is it come from.

  Read the article

• Domain name is forwarding to my localhost, no idea why

  - by Dustin Fineout

  On my local development machine, I have a WAMP setup (Windows Vista Home Premium, Apache 2, MySQL and PHP 5). One of my projects is rehash.dustinfineout.com, which may be related to the problem... For some reason, when I try to visit http://www.rehash.com in a browser, it forwards automatically to 127.0.0.1 loopback/localhost. I discovered this entirely accidentally. I have already looked at the http.conf and extra/httpd-vhosts.conf Apache configuration files and these are not causing it. I also checked the windows hosts file but that had no entries in it either (C:/WINDOWS/System32/drivers/etc/hosts - maybe there is another location I need to check). Any ideas? Just to clarify, rehash.com is NOT my domain.

  Read the article

• how to pass domain name to backend with pound

  - by FurtiveFelon

  I am using pound as a way to decode SSL for the backend, but the bulk of the work is done on varnish (including virtualhost stuff). As a result, I need pound to just forward all other traffic to varnish verbatim, but it doesn't seem to do that. I am using the default configuration: ListenHTTP Address 1.2.3.4 Port 8080 ## allow PUT and DELETE also (by default only GET, POST and HEAD)?: xHTTP 0 Service BackEnd Address 127.0.0.1 Port 80 End End End So whenever I hit example.com:8080, it will always redirect to the default backend for varnish, which i assume was because the domain (host) header isn't send along. Anyone know what could be wrong? Thanks a lot! Jason

  Read the article

• Plesk 9 - Client panel access via client domain, not server host name

  - by Ben

  I've setup a Plesk 9 vps recently. The plesk admin is accessible at, say, http://superawesomedomain.com:8443. I'm setting up a couple of client domains on the server. I'd like clients to be able to access plesk via a similar url, but instead it would be something like http://inferiorclientdomain.com:8443. This works ok in a sense, but it always redirect the request for inferiorclientdomain.com:8443 to superawesomedomain.com:8443. I'd like the control panel access url to remain on inferiorclientdomain.com. Is that possible? EDIT: System Info. Plesk 9.5.2 on CentOS 5 (Build 95100504.12)

  Read the article

• Print the file name with another extension (Batch-program)

  - by Semyon Perepelitsa

  Batch-program launchs with 1 parameter (full path to file) program.cmd "C:\Path\To\File\Filename.txt" Now, this program consists of 1 command: echo %1 And it just prints an argument: C:\Path\To\File\Filename.txt for the upper example. But I want it to print an argument (full path) with another extension, e.g. .exe. For the upper example, I want it to print C:\Path\To\File\Filename.exe. How to make it do that?

  Read the article

• Jetty interprets JETTY_ARGS as file name

  - by Lena Schimmel

  I'm running Jetty (version "null 6.1.22") on Ubuntu 10.04. It's running fine until I need JSP support. According to several blog posts I need to set the JETTY_ARGS to OPTIONS=Server,jsp. However, if I put this into /etc/default/jetty: JETTY_ARGS=OPTIONS=Server,jsp and restart Jetty via /etc/init.d/jetty stop && /etc/init.d/jetty start, it reports success, but does not accept connections. I notices that it logs something to /usr/share/jetty/logs/out.log: 2012-09-11 11:19:05.110:WARN::EXCEPTION java.io.FileNotFoundException: /var/cache/jetty/tmp/OPTIONS=Server,jsp (No such file or directory) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.<init>(FileInputStream.java:137) at java.io.FileInputStream.<init>(FileInputStream.java:96) at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection.java:87) at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:178) at com.sun.org.apache.xerces.internal.impl.XMLEntityManager.setupCurrentEntity(XMLEntityManager.java:630) at com.sun.org.apache.xerces.internal.impl.XMLVersionDetector.determineDocVersion(XMLVersionDetector.java:189) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:776) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:741) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:123) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1208) at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:525) at javax.xml.parsers.SAXParser.parse(SAXParser.java:392) at org.mortbay.xml.XmlParser.parse(XmlParser.java:188) at org.mortbay.xml.XmlParser.parse(XmlParser.java:204) at org.mortbay.xml.XmlConfiguration.<init>(XmlConfiguration.java:109) at org.mortbay.xml.XmlConfiguration.main(XmlConfiguration.java:969) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.mortbay.start.Main.invokeMain(Main.java:194) at org.mortbay.start.Main.start(Main.java:534) at org.mortbay.jetty.start.daemon.Bootstrap.start(Bootstrap.java:30) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:177) That is, whatever I put into JETTY_ARGS, it inteprets is as a filename inside /var/cache/jetty/tmp/ and tries to parse that file as XML (or does it parse some other XML and tries to read that file as a DTD? I'm not sure.). This doesn't seem to make any sense to me, especially since that directory is entirely empty. I've verified this with several other Strings, not only OPTIONS=Server,jsp.

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >