Search Results

Search found 109118 results on 4365 pages for 'one red network'.

Page 83/4365 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

• Linux installation on Acer Aspire One D270

  - by ronnie

  I was planning to buy Acer Aspire One D270 within a few days and as everybody installs linux on their netbook I was also planning to do that. Now, my question is how is Acer's hardware compatibility with linux and specifically in respect to the new Acer Aspire One D270. Has anybody tried installing linux on these new netbooks. It will be a great help if a D270 user can share his/her experience with linux usage. I read on some forums that there is some linux driver issue with Intel GMA 3600 and that people are not able to adjust their brightness. So, as I am a linux noob is this a major issue or not. Specs: RAM : 2Gb DDR3 Processor: Intel N2600(Cedar Trail) Graphics: Intel GMA 3600 HardDisk: 320Gb 5400 rpm

  Read the article

• *DX11, HLSL* - Colour as 4 floats or one UINT

  - by Paul

  With the DX11 pipeline, would it be much quicker for the vertex buffer to pass one single UINT with one byte per channel to the input assembler, as opposed to three floats? Then the vertex shader would convert the four bytes to four floats, which I guess is the required colour format for the pipeline. In this instance, colour accuracy isn't an issue. The vertex buffer would need to be updated many times per frame, so using a single UINT and saving 12 bytes for every vertex could well be worth it: quicker uploads to vram and also less memory used. But the cost is the extra shader work for every vertex to convert each 8 bits of the input UNIT into a float. Anyone have an idea if it might be worth doing? Or, is it possible for the pipeline to be set to just internally use a four-byte colour format? The swap chain buffer has been initialised as DXGI_FORMAT_R8G8B8A8_UNORM, so ultimately that's how the colour will be written. Thanks!

  Read the article

• GPL: does one line of GPLed code make program a "derived work"

  - by SigTerm

  I've recently run into some argument with a person that claims to be a lawyer (I have my suspicions about this not being completely true, though). As far as I know, copying even one line of code from GPLed program into proprietary body of code requires you to release the whole thing under GPL, if you ever decide to publish the software and make it available to the public. The person in question claims that it is "absurd" (I know it is, but AFAIK that's how GPL works), it is "redefining the copyright", "GPL has no power to do that", and claiming that "one line of GPLed code makes you release the whole thing under GPL" is absurd. That contradicts the GPL FAQ. Can somebody clarify the situation? Am I right in assumption that copying even smallest subroutine from GPL program into your code automatically makes your program a "derived work" which means you are obliged to release it under GPL license if you publish it?

  Read the article

• How (recipe) to build only one kernel module?

  - by Pro Backup

  I have a bug in a Linux kernel module that causes the stock Ubuntu 14.04 kernel to oops (crash). That is why I want to edit/patch the source of only that single kernel module to add some extra debug output. The kernel module in question is mvsas and not necessary to boot. For that reason I don't see any need to update any initrd images. I have read a lot of information (as shown below) and find the setup and build process confusion. I need two recipes: to setup/configure the build environment once steps to do after editing any source file of this kernel module (.c and .h) and converting that edit into a new kernel module (.ko) The sources that have been used are: build one kernel module - Google search http://www.linuxquestions.org/questions/linux-kernel-70/rebuilding-a-single-kernel-module-595116/ http://stackoverflow.com/questions/8744087/how-to-recompile-just-a-single-kernel-module http://www.pixelbeat.org/docs/rebuild_kernel_module.html How do I build a single in-tree kernel module? http://ubuntuforums.org/showthread.php?t=1153067 http://ubuntuforums.org/showthread.php?t=2112166 http://ubuntuforums.org/showthread.php?t=1115593 build one kernel module ubuntu - Google search 'make +single +kernel +module' - Ask Ubuntu 'make +kernel +module' - Ask Ubuntu My makefile results in: No rule to make target `arch/x86/tools/relocs.c', needed '"Invalid module format"' - Ask Ubuntu Driver installation: compiling source code for newer kernel Modprobe: 'Invalid nodule format', yet works after insmod "Symbol version dump" "is missing" - Google search http://stackoverflow.com/questions/9425523/should-i-care-that-the-symbol-version-dump-is-missing-how-do-i-get-one Where can I find the corresponding Module.symvers and .config files for 12.04.3 i386 server? "no symbol version for module_layout" when trying to load usbhid.ko Broken links inside Linux header file folder 'make modules_install' - Ask Ubuntu 'modules_install' - Ask Ubuntu Empty build directory in custom compiled kernel Not able to see pr_info output In which directory are the kernel source files and how can I recompile it? How can I compile and install that patched libata-eh.c file? 'modules_install +depmod' - Ask Ubuntu modules_install depmod - Google search "make modules_install" - Google search http://www.csee.umbc.edu/courses/undergraduate/CMSC421/fall02/burt/projects/howto_build_kernel.html http://unix.stackexchange.com/questions/20864/what-happens-in-each-step-of-the-linux-kernel-building-process https://wiki.ubuntu.com/KernelCustomBuild http://www.cyberciti.biz/tips/build-linux-kernel-module-against-installed-kernel-source-tree.html http://www.linuxforums.org/forum/kernel/170617-solved-make-modules_install-different-path.html "make prepare" - Google search "make prepare" "scripts/kconfig/conf --silentoldconfig Kconfig" - Google search http://ubuntuforums.org/showthread.php?t=1963515 ubuntu "make prepare" version - Google search http://stackoverflow.com/questions/8276245/how-to-compile-a-kernel-module-against-a-new-source https://help.ubuntu.com/community/Kernel/Compile How do I compile a kernel module? How to add a custom driver to my kernel? Compile and loading kernel module without compiling the kernel

  Read the article

• Python C API return more than one value / object without building a tuple [migrated]

  - by Grisu

  I got the following problem. I have written a C-Extension to Python(2.7 / 3.2) to interface a self written software library. Unfortunately I need to return two values from the function where the last one is optional. In Python I tried def func(x,y): return x+y, x-y test = func(13,4) but test is a tuple. If I write test1,test2 = func(13,4) I got both values separated. Is there a possibility to return only one value without unpacking the tuple, i.e. the second(,.. third, ..fourth) value gets neglected? And if such a solution existst, how does it look for the C-API? Because return Py_BuildValue("ii",x+y,x-y); results in a tuple as well.

  Read the article

• How to Setup Network Link aggregation (802.3ad) on Ubuntu

  - by Sysadmin Geek

  Do you need to pump large amounts of data to a multitude of clients simultaneously, while only using a single IP address? By using “link aggregation” we can join several separate network cards on the system into one humongous NIC. Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Super-Charge GIMP’s Image Editing Capabilities with G’MIC [Cross-Platform] Access and Manage Your Ubuntu One Account in Chrome and Iron Mouse Over YouTube Previews YouTube Videos in Chrome Watch a Machine Get Upgraded from MS-DOS to Windows 7 [Video] Bring the Whole Ubuntu Gang Home to Your Desktop with this Mascots Wallpaper Hack Apart a Highlighter to Create UV-Reactive Flowers [Science]

  Read the article

• The one that got away

  - by Kit Ong

  A hell of an impact by one volcano http://en.wikipedia.org/wiki/Eyjafjallaj%C3%B6kull Looks like someone is desparate to get home...

  Read the article

• sqlite3 timestamp (current_timestamp) one hour off

  - by Eiriks

  I run a small crawler on a virtual ubuntu server, initiated by crontab hourly. Datetime is inserted by defaulting the date filed to TIMESTAMP DEFAULT CURRENT_TIMESTAMP. Table creation looks like this: CREATE TABLE links (page TEXT, link TEXT, date TIMESTAMP DEFAULT CURRENT_TIMESTAMP, PRIMARY KEY(page,link)); The datetime gets stored fine, but it one hour off (one hour behind) Norwegian time (GMT +1). The server is located where-ever, I just need it to be on GMT+1. By typing datein the ssh session I get: Wed Dec 19 17:26:02 CET 2012 and that is correct (just now). So where does sqlite3 get it's time from? What must I do to set the time so that sqlite3 gets the time right?

  Read the article

• Challenge: Learn One New Thing Today

  - by BuckWoody

  Most of us know that there's a lot to learn. I'm teaching a class this morning, and even on the subject where I'm the "expert" (that word always makes me nervous!) I still have a lot to learn. To learn, sometimes I take a class, read a book, or carve out a large chunk of time so that I can fully grasp the subject. But since I've been working, I really don't have a lot of opportunities to do that. Like you, I'm really busy. So what I've been able to learn is to take just a few moments each day and learn something new about SQL Server. I thought I would share that process here. First, I started with an outline of the product. You can use Books Online, a college class syllabus, a training class outline, or a comprehensive book table of contents. Then I checked off the things I felt I knew a little about. Sure, I'll come back around to those, but I want to be as efficient as I can. I then trolled various checklists to see what I needed to know about the subjects I didn't have checked off. From there (I'm doing all this in a notepad, and then later in OneNote when that came out) I developed a block of text for that subject. Every time I ran across a book, article, web site or recording on that topic I wrote that reference down. Later I went back and quickly looked over those resources and tried to figure out how I could parcel it out - 10 minutes for this one, a free seminar (like the one I'm teaching today - ironic) takes 4 hours, a web site takes an hour to grok, that sort of thing.  Then all I did was figure out how much time each day I'll give to training. Sure, it literally may be ten minutes, but it adds up. One final thing - as I used something I learned, I came back and made notes in that topic. You learn to play the piano not just from a book, but by playing the piano, after all. If you don't use what you learn, you'll lose it. So if you're interested in getting better at SQL Server, and you're willing to do a little work, try out this method. Leave a note here for others to encourage them.  Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Unable to sync files not located in the Ubuntu One folder

  - by pst007x

  I have the option to sync files in nautilus, however when the option is selected nothing happens. I am able to SLOWLY sync files in the Ubuntu One folder (unless in sub-folders), but only there. Why give the option if it does not work? This really is still beta, so to charge for this service is terrible. I am a little frustrated at the moment, I have tried all sorts; removing accounts to a fresh Ubuntu install! I am at a loss :-( Can anyone else sync files outside the Ubuntu One folder, if so how? Thanks

  Read the article

• Only recognizes one partition from multi partitions SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

• Only recognizes one of multiple partitions on SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

• Coolest Twitter Usernames – One Letter @A to @Z Names

  - by Gopinath

  How cool is your Twitter user name? If you think your twitter name is catchy and cool, what do you think about the Twitter usernames that are just one letter? Lucky Tweeple who registered at the inaugural days of Twitter service were able to grab single letter user names. The Atlantic site has compiled details about the twitter user names @a to @z and it’s an interesting read. Catch the details over here at The Atlantic [via im] This article titled,Coolest Twitter Usernames – One Letter @A to @Z Names, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Network outside internal not reaching TMG Forefront 2010 (Hyper-V environment)

  - by Pascal

  Below is my environment: I have 1 physical machine running Windows 2008 R2, with the Hyper-V role. This machine has 3 physical NICs: One for Internet One for Internal Network One for Wireless Network All 3 have their respective Virtual Networks in Hyper-V, and I have an extra Private virutal machine network for a DMZ Network. In one of the virtual machines, I have TMG Forefront 2010 SP1 installed, with all 4 networks available to it. Below is the IPCONFIG /ALL at the firewall: Windows IP Configuration Host Name . . . . . . . . . . . . : FRW-EXP1-02 Primary Dns Suffix . . . . . . . : exp1.eti.br Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : exp1.eti.br Ethernet adapter Internet: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #4 Physical Address. . . . . . . . . : 00-15-5D-01-06-0E DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::6d05:6033:4cfc:bdf5%15(Preferred) IPv4 Address. . . . . . . . . . . : 189.100.110.xxx(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.240.0 Lease Obtained. . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 11:17:24 Lease Expires . . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 16:07:02 Default Gateway . . . . . . . . . : 189.100.96.xxx DHCP Server . . . . . . . . . . . : 201.6.2.43 DHCPv6 IAID . . . . . . . . . . . : 436213085 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Rede Interna: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #3 Physical Address. . . . . . . . . : 00-15-5D-01-06-0C DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::51ff:4723:ce4c:bbc3%14(Preferred) IPv4 Address. . . . . . . . . . . : 10.50.75.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 352327005 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 10.50.75.1 10.50.75.2 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter DMZ: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #2 Physical Address. . . . . . . . . : 00-15-5D-01-06-0A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::d4c5:75cf:e9aa:73e1%13(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.10.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 301995357 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Wireless: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-0B DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::459:8ca6:d02:8da1%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234886493 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled I have the Networks below at Forefront: External: IP addresses external to the Forefront TMG Networks Internal: 10.50.75.0 - 10.50.75.255 Local Host: Perimiter: 192.168.10.0 - 192.168.10.255 Wireless: 192.168.1.0 - 192.168.1.255 In the Networks Rules, I have: 1 => Route => Local Host => All Networks 2 => Route => Quarantined; VPN => Internal 3 => NAT => Internal; VPN => Perimiter 4 => NAT => Internal; Perimiter; Quarantined; VPN; Wireless => External My problem is that I can only communicate with the Internal and External networks. If a ping www.google.com or 10.50.75.21 from the Forefront VM, I get answer backs without a problem. If I try to ping a machine at the Perimiter network or the Wireless network, it doesn't get routed back to Forefront, and it's the default gateway on all Networks. Here as ping samples: PS C:\Users\Administrator.TPB1> ping www.google.com Pinging www.l.google.com [64.233.163.104] with 32 bytes of data: Reply from 64.233.163.104: bytes=32 time=11ms TTL=58 Reply from 64.233.163.104: bytes=32 time=8ms TTL=58 Ping statistics for 64.233.163.104: Packets: Sent = 2, Received = 2, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 8ms, Maximum = 11ms, Average = 9ms Control-C PS C:\Users\Administrator.TPB1> ping 10.50.75.21 Pinging 10.50.75.21 with 32 bytes of data: Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Ping statistics for 10.50.75.21: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms PS C:\Users\Administrator.TPB1> ping 192.168.10.3 Pinging 192.168.10.3 with 32 bytes of data: Reply from 192.168.10.1: Destination host unreachable. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.10.3: Packets: Sent = 4, Received = 1, Lost = 3 (75% loss), PS C:\Users\Administrator.TPB1> The ping to the 192.168.10.3 gets the Destination host unreachable. Below is the ipconfig for the perimiter VM: PS C:\Users\Administrator.Administrator> ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : app-exp1-02 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unkown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-08 DHCP Enabled. . . . . . . . . . . : No IPv4 Address. . . . . . . . . . . : 192.168.10.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.10.1 DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 Trying to ping 192.168.10.1 ( the gateway ) from the DMZ machine also does not work. When I use Log & Reports to monitor packets from Wireless network and Perimiter network, I don't get any packets link PING or HTTP that I try to send. But I do get a lot of spoofing messages for NETBIOS broadcasts... it's like Forefront thinks it's coming from a different network, but I don't know why. Please Help! Tks

  Read the article

• TDC: The Developer's Conference Day One

  - by Tori Wieldt

  The Developer's Conference (TDC) kicked off Wednesday in São Paulo, Brazil. With over 3000 developers in attendance over five days, it is the premier multi-community developer conference in Brazil, organized by Globalcode. Yara Senger, one of the organizers said, "We like to say multi-community rather than multi-technology because it is interesting and benefical when various communities get together. They learn so much from each other!" TDC includes tracks on Java and several other technologies, including SOA, Python, Ruby, mobile and digital TV. In the mobile track, developers who create a Java ME app will get a Nokia S40 phone!New this year at TDC is the Java University track, sponsored by Oracle.  It is aimed at university students and professionals who are new to Java. The lectures are introductory level, with an educational focus and practical exercises. The Java track and other tracks, such as SOA, mobile and Digital TV, are getting lots of help from the expertise of Brazilian JUGS members. Thanks to GoJava, JavaBahia, JavaNoroeste and SouJava!Carlos Fernando, one of the coordinators on the Digital TV track, said "My goal is to teach developers the basics of digital TV, and show them the tools used to build interactive TV applications." Fernando explained the concept of "the second screen:" that many people watch TV and have second smart device (tablet or smartphone) with them, and this creates many opportunities for developers. For example, while watching TV, a viewer can get extra content (interviews, behind the scenes) on their tablet. More interestingly, while watching their favorite TV show a viewer likes an outfit one of the actors is wearing, their smartphone can tell them where they can buy it nearby, or they can order it online immediately. Fernando exclaimed, "The opportunities for developers are nearly infinite in the area of digital TV!" At the TDC opening keynote, Debora Palermo, Oracle University country manager for Brazil, reminded attendees that Java is present in many devices, from simple to complex, and knowledge of this platform can open many doors in the labor market. She explained Oracle's Workforce Development Program (WDP), managed by Oracle University, which allows educational institutions to deliver Oracle training. WDP allows for easy and low-cost access to Oracle training in local communities across the world. "Oracle University is committed to creating the next generation of Java developers, and WDP can make that happen," Palermo said. As of March 2012, Oracle University is partnering with Globalcode to offer WDP. Students can earn official Oracle Course Certifications, a great way to learn Java.Brazilian developers that cannot attend TDC can watch live streaming.

  Read the article

• Multiple sites redirected to one main site

  - by mattgcon

  I have a client who insists of having multiple website domains all being redirected to one main website domain. It is getting out of hand and his server has become conveluted and riddled with garbage because of it, not to mention confusing at times. Each of these domains that he is setting up has no content, they simply redirect the user to the main website domain. Is this practice of having multiple domains pointing to one main website common? And does anyone know where I can get information to give to this client to let him know this is a bad practice if it is a bad practice?

  Read the article

• Ubuntu only recognizes one partition from multi partitions SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

• Multiple domain with one host - SEO pov

  - by Swing Magic

  Lets say i currently have mycompanyname.com domain. and after several time i found that its very hard to hit top of serp. after searching i find there is domain that match with one of my keyword. i build website with 2 language. and im able to assign both of url with different language. my question, impact with SEO? it will have a load of duplicated content between those domain (image video etc). im afraid one of my website will have marked as plagiarist because many of content will be same. anyone experience the same condition? Thank you!

  Read the article

• Copy hangs in local network

  - by umpirsky

  I want to copy files from one Ubuntu system to another.They are both in local wireless network. I shared entire home dir on one, and tried to copy some files to another. It works for some time and then it just hangs at some point. I use Nautilus to copy files. Here is the example screenshot, it just hangs like this: After I cancel, Nautilus icon in lauchbar keeps progress bar, so I guess there is some problem. What can be the problem?

  Read the article

• Changing from one file to another

  - by jbander

  I'm told to go to /home/jbander/Downloads, so how do I do that, I assume you do it in terminal but what do you do next, I can get to home but thats it. How do I go from one directory or file or whatever they are, to another and once I'm there what do I do to see what is in the download file. One more question if I want to change it from e.g. cow to e.g. duck how would I do that(they are just arbitrary names) how do I get rid of cow and how do I put duck in it's place.

  Read the article

• Multiple domain names with pages linking to one website

  - by Mark Ravenhill

  Hello, I work for a company who have been redesigning their company website. I have been asked to register loads of domain names that contain the keywords that they want to use on the original site. Each of these domain names will contain a one page website with a destription of what the company offers and a link saying something along the lines of 'click here for more infmormation' which then takes you to the main site. The idea being the main site will then be recieving a lot of inbound links and hopefully rise in the google rankings, not to mention bring in more customers who have come to the site from all the other domain names who wouldn't have normally got to the website because it wasn't ranked on the first page. Is this a good idea or will Google see this as spam and penalise the main site for having loads of links to it from one page websites hosted on the same nameserver? Any advice would be greatly appreciated. Thanks, Mark.

  Read the article

• Computer Networks UNISA - Chap 10 &ndash; In Depth TCP/IP Networking

  - by MarkPearl

  After reading this section you should be able to Understand methods of network design unique to TCP/IP networks, including subnetting, CIDR, and address translation Explain the differences between public and private TCP/IP networks Describe protocols used between mail clients and mail servers, including SMTP, POP3, and IMAP4 Employ multiple TCP/IP utilities for network discovery and troubleshooting Designing TCP/IP-Based Networks The following sections explain how network and host information in an IPv4 address can be manipulated to subdivide networks into smaller segments. Subnetting Subnetting separates a network into multiple logically defined segments, or subnets. Networks are commonly subnetted according to geographic locations, departmental boundaries, or technology types. A network administrator might separate traffic to accomplish the following… Enhance security Improve performance Simplify troubleshooting The challenges of Classful Addressing in IPv4 (No subnetting) The simplest type of IPv4 is known as classful addressing (which was the Class A, Class B & Class C network addresses). Classful addressing has the following limitations. Restriction in the number of usable IPv4 addresses (class C would be limited to 254 addresses) Difficult to separate traffic from various parts of a network Because of the above reasons, subnetting was introduced. IPv4 Subnet Masks Subnetting depends on the use of subnet masks to identify how a network is subdivided. A subnet mask indicates where network information is located in an IPv4 address. The 1 in a subnet mask indicates that corresponding bits in the IPv4 address contain network information (likewise 0 indicates the opposite) Each network class is associated with a default subnet mask… Class A = 255.0.0.0 Class B = 255.255.0.0 Class C = 255.255.255.0 An example of calculating  the network ID for a particular device with a subnet mask is shown below.. IP Address = 199.34.89.127 Subnet Mask = 255.255.255.0 Resultant Network ID = 199.34.89.0 IPv4 Subnetting Techniques Subnetting breaks the rules of classful IPv4 addressing. Read page 490 for a detailed explanation Calculating IPv4 Subnets Read page 491 – 494 for an explanation Important… Subnetting only applies to the devices internal to your network. Everything external looks at the class of the IP address instead of the subnet network ID. This way, traffic directed to your network externally still knows where to go, and once it has entered your internal network it can then be prioritized and segmented. CIDR (classless Interdomain Routing) CIDR is also known as classless routing or supernetting. In CIDR conventional network class distinctions do not exist, a subnet boundary can move to the left, therefore generating more usable IP addresses on your network. A subnet created by moving the subnet boundary to the left is known as a supernet. With CIDR also came new shorthand for denoting the position of subnet boundaries known as CIDR notation or slash notation. CIDR notation takes the form of the network ID followed by a forward slash (/) followed by the number of bits that are used for the extended network prefix. To take advantage of classless routing, your networks routers must be able to interpret IP addresses that don;t adhere to conventional network class parameters. Routers that rely on older routing protocols (i.e. RIP) are not capable of interpreting classless IP addresses. Internet Gateways Gateways are a combination of software and hardware that enable two different network segments to exchange data. A gateway facilitates communication between different networks or subnets. Because on device cannot send data directly to a device on another subnet, a gateway must intercede and hand off the information. Every device on a TCP/IP based network has a default gateway (a gateway that first interprets its outbound requests to other subnets, and then interprets its inbound requests from other subnets). The internet contains a vast number of routers and gateways. If each gateway had to track addressing information for every other gateway on the Internet, it would be overtaxed. Instead, each handles only a relatively small amount of addressing information, which it uses to forward data to another gateway that knows more about the data’s destination. The gateways that make up the internet backbone are called core gateways. Address Translation An organizations default gateway can also be used to “hide” the organizations internal IP addresses and keep them from being recognized on a public network. A public network is one that any user may access with little or no restrictions. On private networks, hiding IP addresses allows network managers more flexibility in assigning addresses. Clients behind a gateway may use any IP addressing scheme, regardless of whether it is recognized as legitimate by the Internet authorities but as soon as those devices need to go on the internet, they must have legitimate IP addresses to exchange data. When a clients transmission reaches the default gateway, the gateway opens the IP datagram and replaces the client’s private IP address with an Internet recognized IP address. This process is known as NAT (Network Address Translation). TCP/IP Mail Services All Internet mail services rely on the same principles of mail delivery, storage, and pickup, though they may use different types of software to accomplish these functions. Email servers and clients communicate through special TCP/IP application layer protocols. These protocols, all of which operate on a variety of operating systems are discussed below… SMTP (Simple Mail transfer Protocol) The protocol responsible for moving messages from one mail server to another over TCP/IP based networks. SMTP belongs to the application layer of the ODI model and relies on TCP as its transport protocol. Operates from port 25 on the SMTP server Simple sub-protocol, incapable of doing anything more than transporting mail or holding it in a queue MIME (Multipurpose Internet Mail Extensions) The standard message format specified by SMTP allows for lines that contain no more than 1000 ascii characters meaning if you relied solely on SMTP you would have very short messages and nothing like pictures included in an email. MIME us a standard for encoding and interpreting binary files, images, video, and non-ascii character sets within an email message. MIME identifies each element of a mail message according to content type. MIME does not replace SMTP but works in conjunction with it. Most modern email clients and servers support MIME POP (Post Office Protocol) POP is an application layer protocol used to retrieve messages from a mail server POP3 relies on TCP and operates over port 110 With POP3 mail is delivered and stored on a mail server until it is downloaded by a user Disadvantage of POP3 is that it typically does not allow users to save their messages on the server because of this IMAP is sometimes used IMAP (Internet Message Access Protocol) IMAP is a retrieval protocol that was developed as a more sophisticated alternative to POP3 The single biggest advantage IMAP4 has over POP3 is that users can store messages on the mail server, rather than having to continually download them Users can retrieve all or only a portion of any mail message Users can review their messages and delete them while the messages remain on the server Users can create sophisticated methods of organizing messages on the server Users can share a mailbox in a central location Disadvantages of IMAP are typically related to the fact that it requires more storage space on the server. Additional TCP/IP Utilities Nearly all TCP/IP utilities can be accessed from the command prompt on any type of server or client running TCP/IP. The syntaxt may differ depending on the OS of the client. Below is a list of additional TCP/IP utilities – research their use on your own! Ipconfig (Windows) & Ifconfig (Linux) Netstat Nbtstat Hostname, Host & Nslookup Dig (Linux) Whois (Linux) Traceroute (Tracert) Mtr (my traceroute) Route

  Read the article

• Does 64-bit Ubuntu work on the Acer Aspire One D255

  - by hippietrail

  The Acer Aspire One D255 is the cheapest dual core netbook on the market right now. It has an Intel Atom N550 which should be able to run a 64-bit OS. But when I try to boot the Ubuntu 64-bit live CD I only get one line of diagnostic output that it "found something" on the USB CD drive before locking up. I haven't been able to find anything by Googling yet. Could it just be driver issues for this machine or could the platform be inherently frail for running 64-bit? (My machine is two days old on trial and Windows 7 and Ubuntu 32-bit run but it has locked up under casual use on both OSes.)

  Read the article

• Nexus One Smartphone: Good, Not Great

  The Nexus One smartphone is running behind the iPhone and the Droid and popularity, perhaps with good reason.

  Read the article

• ffmpeg: cut multiple input files with seeking to one output file

  - by Josef Kufner

  I have list of video files (loaded from database), each with start and end time of requested interval: # file begin end v1.mp4 1:01 2:01 v2.mp4 3:02 3:32 v3.mp4 2:03 5:23 And I need to create single video file containing these intervals: [0:00]---v1---[2:00]---v2---[2:30]---v3---[5:50] I preffer usig ffmpeg, since it is installed on server. Caller program is written in PHP. It is easy to cut one input to one output (argument escaping removed for clarity): exec("ffmpeg -ss $begin -i $input_file -ss $begin -c copy $output_file"); I there any easier way than executing ffmpeg for each interval and then execute it once more to concatenate prepared clips together? I really do not like to have a lot of temporary files or dealing with complex process handling.

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >