Search Results

Search found 2098 results on 84 pages for 'paths'.

Page 83/84 | < Previous Page | 79 80 81 82 83 84  | Next Page >

• How to manage maintenance/bug-fix branches in Subversion when setup projects need to be built?

  - by Mike Spross

  We have a suite of related products written in VB6, with some C# and VB.NET projects, and all the source is kept in a single Subversion repository. We haven't been using branches in Subversion (although we do tag releases now), and simply do all development in trunk, creating new releases when the trunk is stable enough. This causes no end of grief when we release a new version, issues are found with it, and we have already begun working on new features or major changes to the trunk. In the past, we would address this in one of two ways, depending on the severity of the issues and how stable we thought the trunk was: Hurry to stabilize the trunk, fix the issues, and then release a maintenance update based on the HEAD revision, but this had the side effect of releases that fixed the bugs but introduced new issues because of half-finished features or bugfixes that were in trunk. Make customers wait until the next official release, which is usually a few months. We want to change our policies to better deal with this situation. I was considering creating a "maintenance branch" in Subversion whenever I tag an official release. Then, new development would continue in trunk, and I can periodically merge specific fixes from trunk into the maintenance branch, and create a maintenance release when enough fixes are accumulated, while we continue to work on the next major update in parallel. I know we could also have a more stable trunk and create a branch for new updates instead, but keeping current development in trunk seems simpler to me. The major problem is that while we can easily branch the source code from a release tag and recompile it to get the binaries for that release, I'm not sure how to handle the setup and installer projects. We use QSetup to create all of our setup programs, and right now when we need to modify a setup project, we just edit the project file in-place (all the setup projects and any dependencies that we don't compile ourselves are stored on a separate server, and we make sure to always compile the setup projects on that machine only). However, since we may add or remove files to the setup as our code changes, there is no guarantee that today's setup projects will work with yesterday's source code. I was going to put all the QSetup projects in Subversion to deal with this, but I see some problems with this approach. I want the creation of setup programs to be as automated as possible, and at the very least, I want a separate build machine where I can build the release that I want (grabbing the code from Subversion first), grab the setup project for that release from Subversion, recompile the setup, and then copy the setup to another place on the network for QA testing and eventual release to customers. However, when someone needs to change a setup project (to add a new dependency that trunk now requires or to make other changes), there is a problem. If they treat it like a source file and check it out on their own machine to edit it, they won't be able to add files to the project unless they first copy the files they need to add to the build machine (so they are available to other developers), then copy all the other dependencies from the build machine to their machine, making sure to match the folder structure exactly. The issue here is that QSetup uses absolute paths for any files added to a setup project. However, this means installing a bunch of setup dependencies onto development machines, which seems messy (and which could destabilize the development environment if someone accidentally runs the setup project on their machine). Also, how do we manage third-party dependencies? For example, if the current maintenance branch used MSXML 3.0 and the trunk now requires MSXML 4.0, we can't go back and create a maintenance release if we have already replaced the MSXML library on the build machine with the latest version (assuming both versions have the same filename). The only solution I can think is to either put all the third-party dependencies in Subversion along with the source code, or to make sure we put different library versions in separate folders (i.e. C:\Setup\Dependencies\MSXML\v3.0 and C:\Setup\Dependencies\MSXML\v4.0). Is one way "better" or more common than the other? Are there any best practices for dealing with this situation? Basically, if we release v2.0 of our software, we want to be able to release v2.0.1, v2.0.2, and v.2.0.3 while we work on v2.1, but the whole setup/installation project and setup dependency issue is making this more complicated than the typical "just create a branch in Subversion and recompile as needed" answer.

  Read the article

• solved: puppet master REST API returns 403 when running under passenger works when master runs from command line

  - by Anadi Misra

  I am using the standard auth.conf provided in puppet install for the puppet master which is running through passenger under Nginx. However for most of the catalog, files and certitifcate request I get a 403 response. ### Authenticated paths - these apply only when the client ### has a valid certificate and is thus authenticated # allow nodes to retrieve their own catalog path ~ ^/catalog/([^/]+)$ method find allow $1 # allow nodes to retrieve their own node definition path ~ ^/node/([^/]+)$ method find allow $1 # allow all nodes to access the certificates services path ~ ^/certificate_revocation_list/ca method find allow * # allow all nodes to store their reports path /report method save allow * # unconditionally allow access to all file services # which means in practice that fileserver.conf will # still be used path /file allow * ### Unauthenticated ACL, for clients for which the current master doesn't ### have a valid certificate; we allow authenticated users, too, because ### there isn't a great harm in letting that request through. # allow access to the master CA path /certificate/ca auth any method find allow * path /certificate/ auth any method find allow * path /certificate_request auth any method find, save allow * path /facts auth any method find, search allow * # this one is not stricly necessary, but it has the merit # of showing the default policy, which is deny everything else path / auth any Puppet master however does not seems to be following this as I get this error on client [amisr1@blramisr195602 ~]$ sudo puppet agent --no-daemonize --verbose --server bangvmpllda02.XXXXX.com [sudo] password for amisr1: Starting Puppet client version 3.0.1 Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /certificate_revocation_list/ca [find] at :110 Info: Retrieving plugin Error: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [search] at :110 Error: /File[/var/lib/puppet/lib]: Could not evaluate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Could not retrieve file metadata for puppet://devops.XXXXX.com/plugins: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Error: Could not retrieve catalog from remote server: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /catalog/blramisr195602.XXXXX.com [find] at :110 Using cached catalog Error: Could not retrieve catalog; skipping run Error: Could not send report: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /report/blramisr195602.XXXXX.com [save] at :110 and the server logs show XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/certificate_revocation_list/ca? HTTP/1.1" 403 102 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadatas/plugins?links=manage&recurse=true&&ignore=---+%0A++-+%22.svn%22%0A++-+CVS%0A++-+%22.git%22&checksum_type=md5 HTTP/1.1" 403 95 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "POST /production/catalog/blramisr195602.XXXXX.com HTTP/1.1" 403 106 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "PUT /production/report/blramisr195602.XXXXX.com HTTP/1.1" 403 105 "-" "Ruby" thefile server conf file is as follows (and goin by what they say on puppet site, It is better to regulate access in auth.conf for reaching file server and then allow file server to server all) [files] path /apps/puppet/files allow * [private] path /apps/puppet/private/%H allow * [modules] allow * I am using server and client version 3 Nginx has been compiled using the following options nginx version: nginx/1.3.9 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/apps/nginx --conf-path=/apps/nginx/nginx.conf --pid-path=/apps/nginx/run/nginx.pid --error-log-path=/apps/nginx/logs/error.log --http-log-path=/apps/nginx/logs/access.log --with-http_ssl_module --with-http_gzip_static_module --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/nginx --add-module=/apps/Downloads/nginx/nginx-auth-ldap-master/ and the standard nginx puppet master conf server { ssl on; listen 8140 ssl; server_name _; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /apps/nginx/html/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXXXXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXXXXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } Puppet is picking up the correct settings from the files mentioned because config print command points to /etc/puppet [amisr1@bangvmpllDA02 puppet]$ sudo puppet config print | grep conf async_storeconfigs = false authconfig = /etc/puppet/namespaceauth.conf autosign = /etc/puppet/autosign.conf catalog_cache_terminus = store_configs confdir = /etc/puppet config = /etc/puppet/puppet.conf config_file_name = puppet.conf config_version = "" configprint = all configtimeout = 120 dblocation = /var/lib/puppet/state/clientconfigs.sqlite3 deviceconfig = /etc/puppet/device.conf fileserverconfig = /etc/puppet/fileserver.conf genconfig = false hiera_config = /etc/puppet/hiera.yaml localconfig = /var/lib/puppet/state/localconfig name = config rest_authconfig = /etc/puppet/auth.conf storeconfigs = true storeconfigs_backend = puppetdb tagmap = /etc/puppet/tagmail.conf thin_storeconfigs = false I checked the firewall rules on this VM; 80, 443, 8140, 3000 are allowed. Do I still have to tweak any specifics to auth.conf for getting this to work? Update I added verbose logging to the puppet master and restarted nginx; here's the additional info I see in logs Mon Dec 10 18:19:15 +0530 2012 Puppet (err): Could not resolve 10.209.47.31: no name for 10.209.47.31 Mon Dec 10 18:19:15 +0530 2012 access[/] (info): defaulting to no access for 10.209.47.31 Mon Dec 10 18:19:15 +0530 2012 Puppet (warning): Denying access: Forbidden request: 10.209.47.31(10.209.47.31) access to /file_metadata/plugins [find] at :111 Mon Dec 10 18:19:15 +0530 2012 Puppet (err): Forbidden request: 10.209.47.31(10.209.47.31) access to /file_metadata/plugins [find] at :111 10.209.47.31 - - [10/Dec/2012:18:19:15 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" On the agent machine facter fqdn and hostname both return a fully qualified host name [amisr1@blramisr195602 ~]$ sudo facter fqdn blramisr195602.XXXXXXX.com I then updated the agent configuration to add dns_alt_names = 10.209.47.31 cleaned all certificates on master and agent and regenerated the certificates and signed them on master using the option --allow-dns-alt-names [amisr1@bangvmpllDA02 ~]$ sudo puppet cert sign blramisr195602.XXXXXX.com Error: CSR 'blramisr195602.XXXXXX.com' contains subject alternative names (DNS:10.209.47.31, DNS:blramisr195602.XXXXXX.com), which are disallowed. Use `puppet cert --allow-dns-alt-names sign blramisr195602.XXXXXX.com` to sign this request. [amisr1@bangvmpllDA02 ~]$ sudo puppet cert --allow-dns-alt-names sign blramisr195602.XXXXXX.com Signed certificate request for blramisr195602.XXXXXX.com Removing file Puppet::SSL::CertificateRequest blramisr195602.XXXXXX.com at '/var/lib/puppet/ssl/ca/requests/blramisr195602.XXXXXX.com.pem' however, that doesn't help either; I get same errors as before. Not sure why in the logs it shows comparing access rules by IP and not hostname. Is there any Nginx configuration to change this behavior?

  Read the article

• Problem deploying servlets in JBoss 5.1 on eclipse.

  - by Jeremy Goodell

  Yesterday I created a simple image servlet and attempted to deploy it. I am getting an error on JBoss startup, and then further errors on trying to invoke the servlet. I spent about 8 hours yesterday searching the web for answers and trying different scenarios. I ended up making my JBoss problems worse and then fixing them, but I never did get the servlet to work. The servlet is com.controller.MyImageServlet, and looks like this: package com.controller; import javax.servlet.http.*; /** * Servlet implementation class MyImageServlet */ public class MyImageServlet extends HttpServlet { private static final long serialVersionUID = 1L; public MyImageServlet() { super(); } // Process the HTTP Get request public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { /* ... */ } } The tags I've added to web.xml looks like this: <servlet> <servlet-name>ImageServlet</servlet-name> <servlet-class>com.controller.MyImageServlet</servlet-class> </servlet> <servlet-mapping> <servlet-name>ImageServlet</servlet-name> <url-pattern>/CERTIMAGE/*</url-pattern> </servlet-mapping> On server startup, this is the only indication in the log that something is amiss: 01:59:25,328 WARN [JAXWSDeployerHookPreJSE] Cannot load servlet class: com.controller.MyImageServlet When I try the URL pattern (http://localhost:9980/CERTIMAGE/1), I get the following stack trace in the log (and in the Browser): 01:59:39,640 INFO [[/]] Marking servlet ImageServlet as unavailable 01:59:39,640 ERROR [[ImageServlet]] Allocate exception for servlet ImageServlet java.lang.ClassNotFoundException: com.controller.MyImageServlet at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.jboss.web.tomcat.service.TomcatInjectionContainer.newInstance(TomcatInjectionContainer.java:262) at org.jboss.web.tomcat.service.TomcatInjectionContainer.newInstance(TomcatInjectionContainer.java:256) at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1006) at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:777) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:129) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:190) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:92) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:829) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:598) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447) at java.lang.Thread.run(Thread.java:619) If I try the URL pattern again, I get the following message in the log: 09:33:32,390 INFO [[ImageServlet]] Servlet ImageServlet is currently unavailable I have verified that MyImageServlet.class is in the WAR at WEB-INF/classes/com/controller/images. As a matter of fact, I even added some code to one of my JSPs to attempt to instantiate the Servlet and call the doGet method. This actually works and outputs the correct debug sequences to the log indicating that the Servlet constructor and doGet methods were called. I also tried following some instructions for creating/deploying a very simple HelloWorld servlet, and that has exactly the same problem. Note that web.xml already contained a servlet put there by JBoss: org.jboss.web.tomcat.service.StatusServlet -- that Servlet does not give any errors in the log. As an experiment, I removed ".web" from that path and ended up getting exactly the same error as I'm getting on my Servlet. So it would appear that JBoss is not able to locate my Servlet given the specified path. Just for kicks, I've tried all sorts of other paths, like just plain MyImageServlet, controller.MyImageServlet, and more. Also, the servlet was originally named ImageServlet, but I attempted the name change thinking maybe there was some conflict with an existing ImageServlet. In all cases, the behavior is the same. After all of my research yesterday, I would say that this appears to be a problem with the JBoss servlet container, and I also learned that JBoss 5.1.0.GA should come bundled with a tomcat servlet container. I installed JBoss on my PC (Windows XP) myself less than 2 months ago (from jboss.org) and used it pretty much as is. Note that I am running on JDK 1.6, so I did use the jboss-jdk6 installation version. I am running on Windows, but I also deploy to a Linux virtual dedicated server. I deployed the current version of my program, including the servlet to the Linux box, but I get the exact same errors. I'm reluctant to just try reinstalling JBoss, since it's hard to place the blame on the JBoss installation when I get the same errors on two completely different installations. I am a bit suspicious of the bundled tomcat servlet container, because using eclipse, I haven't been able to locate any indication that there is a tomcat bundled into JBoss. I did locate servlet-api.jar in the JBoss common/lib directory. This is on the eclipse build path. One possibly useful note: I had previously used a standalone tomcat server for other projects using the same eclipse, so maybe it's some sort of eclipse issue? But, as I said, I do get the same errors when I deploy to the Linux server, and that deployment process just involves ftping files to the server and then putting them into the deployed war package and restarting JBoss. Thanks for any help you can provide.

  Read the article

• Accessing py2exe program over network in Windows 98 throws ImportErrors

  - by darvids0n

  I'm running a py2exe-compiled python program from one server machine on a number of client machines (mapped to a network drive on every machine, say W:). For Windows XP and later machines, have so far had zero problems with Python picking up W:\python23.dll (yes, I'm using Python 2.3.5 for W98 compatibility and all that). It will then use W:\zlib.pyd to decompress W:\library.zip containing all the .pyc files like os and such, which are then imported and the program runs no problems. The issue I'm getting is on some Windows 98 SE machines (note: SOME Windows 98 SE machines, others seem to work with no apparent issues). What happens is, the program runs from W:, the W:\python23.dll is, I assume, found (since I'm getting Python ImportErrors, we'd need to be able to execute a Python import statement), but a couple of things don't work: 1) If W:\library.zip contains the only copy of the .pyc files, I get ZipImportError: can't decompress data; zlib not available (nonsense, considering W:\zlib.pyd IS available and works fine with the XP and higher machines on the same network). 2) If the .pyc files are actually bundled INSIDE the python exe by py2exe, OR put in the same directory as the .exe, OR put into a named subdirectory which is then set as part of the PYTHONPATH variable (e.g W:\pylib), I get ImportError: no module named os (os is the first module imported, before sys and anything else). Come to think of it, sys.path wouldn't be available to search if os was imported before it maybe? I'll try switching the order of those imports but my question still stands: Why is this a sporadic issue, working on some networks but not on others? And how would I force Python to find the files that are bundled inside the very executable I run? I have immediate access to the working Windows 98 SE machine, but I only get access to the non-working one (a customer of mine) every morning before their store opens. Thanks in advance! EDIT: Okay, big step forward. After debugging with PY2EXE_VERBOSE, the problem occurring on the specific W98SE machine is that it's not using the right path syntax when looking for imports. Firstly, it doesn't seem to read the PYTHONPATH environment variable (there may be a py2exe-specific one I'm not aware of, like PY2EXE_VERBOSE). Secondly, it only looks in one place before giving up (if the files are bundled inside the EXE, it looks there. If not, it looks in library.zip). EDIT 2: In fact, according to this, there is a difference between the sys.path in the Python interpreter and that of Py2exe executables. Specifically, sys.path contains only a single entry: the full pathname of the shared code archive. Blah. No fallbacks? Not even the current working directory? I'd try adding W:\ to PATH, but py2exe doesn't conform to any sort of standards for locating system libraries, so it won't work. Now for the interesting bit. The path it tries to load atexit, os, etc. from is: W:\\library.zip\<module>.<ext> Note the single slash after library.zip, but the double slash after the drive letter (someone correct me if this is intended and should work). It looks like if this is a string literal, then since the slash isn't doubled, it's read as an (invalid) escape sequence and the raw character is printed (giving W:\library.zipos.pyd, W:\library.zipos.dll, ... instead of with a slash); if it is NOT a string literal, the double slash might not be normpath'd automatically (as it should be) and so the double slash confuses the module loader. Like I said, I can't just set PYTHONPATH=W:\\library.zip\\ because it ignores that variable. It may be worth using sys.path.append at the start of my program but hard-coding module paths is an absolute LAST resort, especially since the problem occurs in ONE configuration of an outdated OS. Any ideas? I have one, which is to normpath the sys.path.. pity I need os for that. Another is to just append os.getenv('PATH') or os.getenv('PYTHONPATH') to sys.path... again, needing the os module. The site module also fails to initialise, so I can't use a .pth file. I also recently tried the following code at the start of the program: for pth in sys.path: fErr.write(pth) fErr.write(' to ') pth.replace('\\\\','\\') # Fix Windows 98 pathing issues fErr.write(pth) fErr.write('\n') But it can't load linecache.pyc, or anything else for that matter; it can't actually execute those commands from the looks of things. Is there any way to use built-in functionality which doesn't need linecache to modify the sys.path dynamically? Or am I reduced to hard-coding the correct sys.path?

  Read the article

• ProFTPd server on Ubuntu getting access denied message when successfully authenticated?

  - by exxoid

  I have a Ubuntu box with a ProFTPD 1.3.4a Server, when I try to log in via my FTP Client I cannot do anything as it does not allow me to list directories; I have tried logging in as root and as a regular user and tried accessing different paths within the FTP Server. The error I get in my FTP Client is: Status: Retrieving directory listing... Command: CDUP Response: 250 CDUP command successful Command: PWD Response: 257 "/var" is the current directory Command: PASV Response: 227 Entering Passive Mode (172,16,4,22,237,205). Command: MLSD Response: 550 Access is denied. Error: Failed to retrieve directory listing Any idea? Here is the config of my proftpd: # # /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file. # To really apply changes, reload proftpd after modifications, if # it runs in daemon mode. It is not required in inetd/xinetd mode. # # Includes DSO modules Include /etc/proftpd/modules.conf # Set off to disable IPv6 support which is annoying on IPv4 only boxes. UseIPv6 off # If set on you can experience a longer connection delay in many cases. IdentLookups off ServerName "Drupal Intranet" ServerType standalone ServerIdent on "FTP Server ready" DeferWelcome on # Set the user and group that the server runs as User nobody Group nogroup MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ # Use this to jail all users in their homes # DefaultRoot ~ # Users require a valid shell listed in /etc/shells to login. # Use this directive to release that constrain. # RequireValidShell off # Port 21 is the standard FTP port. Port 21 # In some cases you have to specify passive ports range to by-pass # firewall limitations. Ephemeral ports can be used for that, but # feel free to use a more narrow range. # PassivePorts 49152 65534 # If your host was NATted, this option is useful in order to # allow passive tranfers to work. You have to use your public # address and opening the passive ports used on your firewall as well. # MasqueradeAddress 1.2.3.4 # This is useful for masquerading address with dynamic IPs: # refresh any configured MasqueradeAddress directives every 8 hours <IfModule mod_dynmasq.c> # DynMasqRefresh 28800 </IfModule> # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Set the user and group that the server normally runs at. # Umask 022 is a good standard umask to prevent new files and dirs # (second parm) from being group and world writable. Umask 022 022 # Normally, we want files to be overwriteable. AllowOverwrite on # Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords: # PersistentPasswd off # This is required to use both PAM-based authentication and local passwords AuthPAMConfig proftpd AuthOrder mod_auth_pam.c* mod_auth_unix.c # Be warned: use of this directive impacts CPU average load! # Uncomment this if you like to see progress and transfer rate with ftpwho # in downloads. That is not needed for uploads rates. # UseSendFile off TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log # Logging onto /var/log/lastlog is enabled but set to off by default #UseLastlog on # In order to keep log file dates consistent after chroot, use timezone info # from /etc/localtime. If this is not set, and proftpd is configured to # chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight # savings timezone regardless of whether DST is in effect. #SetEnv TZ :/etc/localtime <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> # Delay engine reduces impact of the so-called Timing Attack described in # http://www.securityfocus.com/bid/11430/discuss # It is on by default. <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # Alternative authentication frameworks # #Include /etc/proftpd/ldap.conf #Include /etc/proftpd/sql.conf # # This is used for FTPS connections # #Include /etc/proftpd/tls.conf # # Useful to keep VirtualHost/VirtualRoot directives separated # #Include /etc/proftpd/virtuals.con # A basic anonymous configuration, no upload directories. # <Anonymous ~ftp> # User ftp # Group nogroup # # We want clients to be able to login with "anonymous" as well as "ftp" # UserAlias anonymous ftp # # Cosmetic changes, all files belongs to ftp user # DirFakeUser on ftp # DirFakeGroup on ftp # # RequireValidShell off # # # Limit the maximum number of anonymous logins # MaxClients 10 # # # We want 'welcome.msg' displayed at login, and '.message' displayed # # in each newly chdired directory. # DisplayLogin welcome.msg # DisplayChdir .message # # # Limit WRITE everywhere in the anonymous chroot # <Directory *> # <Limit WRITE> # DenyAll # </Limit> # </Directory> # # # Uncomment this if you're brave. # # <Directory incoming> # # # Umask 022 is a good standard umask to prevent new files and dirs # # # (second parm) from being group and world writable. # # Umask 022 022 # # <Limit READ WRITE> # # DenyAll # # </Limit> # # <Limit STOR> # # AllowAll # # </Limit> # # </Directory> # # </Anonymous> # Include other custom configuration files Include /etc/proftpd/conf.d/ UseReverseDNS off <Global> RootLogin on UseFtpUsers on ServerIdent on DefaultChdir /var/www DeleteAbortedStores on LoginPasswordPrompt on AccessGrantMsg "You have been authenticated successfully." </Global> Any idea what could be wrong? Thanks for your help!

  Read the article

• Finding the heaviest length-constrained path in a weighted Binary Tree

  - by Hristo

  UPDATE I worked out an algorithm that I think runs in O(n*k) running time. Below is the pseudo-code: routine heaviestKPath( T, k ) // create 2D matrix with n rows and k columns with each element = -8 // we make it size k+1 because the 0th column must be all 0s for a later // function to work properly and simplicity in our algorithm matrix = new array[ T.getVertexCount() ][ k + 1 ] (-8); // set all elements in the first column of this matrix = 0 matrix[ n ][ 0 ] = 0; // fill our matrix by traversing the tree traverseToFillMatrix( T.root, k ); // consider a path that would arc over a node globalMaxWeight = -8; findArcs( T.root, k ); return globalMaxWeight end routine // node = the current node; k = the path length; node.lc = node’s left child; // node.rc = node’s right child; node.idx = node’s index (row) in the matrix; // node.lc.wt/node.rc.wt = weight of the edge to left/right child; routine traverseToFillMatrix( node, k ) if (node == null) return; traverseToFillMatrix(node.lc, k ); // recurse left traverseToFillMatrix(node.rc, k ); // recurse right // in the case that a left/right child doesn’t exist, or both, // let’s assume the code is smart enough to handle these cases matrix[ node.idx ][ 1 ] = max( node.lc.wt, node.rc.wt ); for i = 2 to k { // max returns the heavier of the 2 paths matrix[node.idx][i] = max( matrix[node.lc.idx][i-1] + node.lc.wt, matrix[node.rc.idx][i-1] + node.rc.wt); } end routine // node = the current node, k = the path length routine findArcs( node, k ) if (node == null) return; nodeMax = matrix[node.idx][k]; longPath = path[node.idx][k]; i = 1; j = k-1; while ( i+j == k AND i < k ) { left = node.lc.wt + matrix[node.lc.idx][i-1]; right = node.rc.wt + matrix[node.rc.idx][j-1]; if ( left + right > nodeMax ) { nodeMax = left + right; } i++; j--; } // if this node’s max weight is larger than the global max weight, update if ( globalMaxWeight < nodeMax ) { globalMaxWeight = nodeMax; } findArcs( node.lc, k ); // recurse left findArcs( node.rc, k ); // recurse right end routine Let me know what you think. Feedback is welcome. I think have come up with two naive algorithms that find the heaviest length-constrained path in a weighted Binary Tree. Firstly, the description of the algorithm is as follows: given an n-vertex Binary Tree with weighted edges and some value k, find the heaviest path of length k. For both algorithms, I'll need a reference to all vertices so I'll just do a simple traversal of the Tree to have a reference to all vertices, with each vertex having a reference to its left, right, and parent nodes in the tree. Algorithm 1 For this algorithm, I'm basically planning on running DFS from each node in the Tree, with consideration to the fixed path length. In addition, since the path I'm looking for has the potential of going from left subtree to root to right subtree, I will have to consider 3 choices at each node. But this will result in a O(n*3^k) algorithm and I don't like that. Algorithm 2 I'm essentially thinking about using a modified version of Dijkstra's Algorithm in order to consider a fixed path length. Since I'm looking for heaviest and Dijkstra's Algorithm finds the lightest, I'm planning on negating all edge weights before starting the traversal. Actually... this doesn't make sense since I'd have to run Dijkstra's on each node and that doesn't seem very efficient much better than the above algorithm. So I guess my main questions are several. Firstly, do the algorithms I've described above solve the problem at hand? I'm not totally certain the Dijkstra's version will work as Dijkstra's is meant for positive edge values. Now, I am sure there exist more clever/efficient algorithms for this... what is a better algorithm? I've read about "Using spine decompositions to efficiently solve the length-constrained heaviest path problem for trees" but that is really complicated and I don't understand it at all. Are there other algorithms that tackle this problem, maybe not as efficiently as spine decomposition but easier to understand? Thanks.

  Read the article

• When building a web Application project, TFS 2008 Builds two spearate projects in the _PublishedFold

  - by Steve Johnson

  Hi all, I am trying to a perform build automation on one of web application projects built using VS 2008. The _PublishedWebSites contains two folders: Web and Deploy. I just want the TFS 2008 to generate only the Deploy Folder and Not the Web Folder. Here is my TFSBuild.proj File <Project ToolsVersion="3.5" DefaultTargets="Compile" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Import Project="$(MSBuildExtensionsPath)\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets" /> <Import Project="$(MSBuildExtensionsPath)\Microsoft\WebDeployment\v9.0\Microsoft.WebDeployment.targets" /> <ItemGroup> <SolutionToBuild Include="$(BuildProjectFolderPath)/../../Development/Main/MySoftware.sln"> <Targets></Targets> <Properties></Properties> </SolutionToBuild> </ItemGroup> <ItemGroup> <ConfigurationToBuild Include="Release|AnyCPU"> <FlavorToBuild>Release</FlavorToBuild> <PlatformToBuild>Any CPU</PlatformToBuild> </ConfigurationToBuild> </ItemGroup> <!--<ItemGroup> <SolutionToBuild Include="$(BuildProjectFolderPath)/../../Development/Main/MySoftware.sln"> <Targets></Targets> <Properties></Properties> </SolutionToBuild> </ItemGroup> <ItemGroup> <ConfigurationToBuild Include="Release|x64"> <FlavorToBuild>Release</FlavorToBuild> <PlatformToBuild>x64</PlatformToBuild> </ConfigurationToBuild> </ItemGroup>--> <ItemGroup> <AdditionalReferencePath Include="C:\3PR" /> </ItemGroup> <Target Name="GetCopyToOutputDirectoryItems" Outputs="@(AllItemsFullPathWithTargetPath)" DependsOnTargets="AssignTargetPaths;_SplitProjectReferencesByFileExistence"> <!-- Get items from child projects first. --> <MSBuild Projects="@(_MSBuildProjectReferenceExistent)" Targets="GetCopyToOutputDirectoryItems" Properties="%(_MSBuildProjectReferenceExistent.SetConfiguration); %(_MSBuildProjectReferenceExistent.SetPlatform)" Condition="'@(_MSBuildProjectReferenceExistent)'!=''"> <Output TaskParameter="TargetOutputs" ItemName="_AllChildProjectItemsWithTargetPathNotFiltered"/> </MSBuild> <!-- Remove duplicates. --> <RemoveDuplicates Inputs="@(_AllChildProjectItemsWithTargetPathNotFiltered)"> <Output TaskParameter="Filtered" ItemName="_AllChildProjectItemsWithTargetPath"/> </RemoveDuplicates> <!-- Target outputs must be full paths because they will be consumed by a different project. --> <CreateItem Include="@(_AllChildProjectItemsWithTargetPath->'%(FullPath)')" Exclude= "$(BuildProjectFolderPath)/../../Development/Main/Web/Bin*.pdb; *.refresh; *.vshost.exe; *.manifest; *.compiled; $(BuildProjectFolderPath)/../../Development/Main/Web/Auth/MySoftware.dll; $(BuildProjectFolderPath)/../../Development/Main/Web/BinApp_Web_*.dll;" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='Always' or '%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest'" > <Output TaskParameter="Include" ItemName="AllItemsFullPathWithTargetPath"/> <Output TaskParameter="Include" ItemName="_SourceItemsToCopyToOutputDirectoryAlways" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='Always'"/> <Output TaskParameter="Include" ItemName="_SourceItemsToCopyToOutputDirectory" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest'"/> </CreateItem> </Target> <!-- To modify your build process, add your task inside one of the targets below and uncomment it. Other similar extension points exist, see Microsoft.WebDeployment.targets. <Target Name="BeforeBuild"> </Target> <Target Name="BeforeMerge"> </Target> <Target Name="AfterMerge"> </Target> <Target Name="AfterBuild"> </Target> --> </Project> I want to build everything that the builtin Deploy project is doing for me. But i dont want the generated Web Project as it conatains App_Web_xxxx.dll assemblies instead of a single compiled assembly. Please help. Thanks

  Read the article

• When building a web application project, TFS 2008 builds two separate projects in _PublishedFolder.

  - by Steve Johnson

  I am trying to perform build automation on one of my web application projects built using VS 2008. The _PublishedWebSites contains two folders: Web and Deploy. I want TFS 2008 to generate only the deploy folder and not the web folder. Here is my TFSBuild.proj file: <Project ToolsVersion="3.5" DefaultTargets="Compile" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Import Project="$(MSBuildExtensionsPath)\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets" /> <Import Project="$(MSBuildExtensionsPath)\Microsoft\WebDeployment\v9.0\Microsoft.WebDeployment.targets" /> <ItemGroup> <SolutionToBuild Include="$(BuildProjectFolderPath)/../../Development/Main/MySoftware.sln"> <Targets></Targets> <Properties></Properties> </SolutionToBuild> </ItemGroup> <ItemGroup> <ConfigurationToBuild Include="Release|AnyCPU"> <FlavorToBuild>Release</FlavorToBuild> <PlatformToBuild>Any CPU</PlatformToBuild> </ConfigurationToBuild> </ItemGroup> <!--<ItemGroup> <SolutionToBuild Include="$(BuildProjectFolderPath)/../../Development/Main/MySoftware.sln"> <Targets></Targets> <Properties></Properties> </SolutionToBuild> </ItemGroup> <ItemGroup> <ConfigurationToBuild Include="Release|x64"> <FlavorToBuild>Release</FlavorToBuild> <PlatformToBuild>x64</PlatformToBuild> </ConfigurationToBuild> </ItemGroup>--> <ItemGroup> <AdditionalReferencePath Include="C:\3PR" /> </ItemGroup> <Target Name="GetCopyToOutputDirectoryItems" Outputs="@(AllItemsFullPathWithTargetPath)" DependsOnTargets="AssignTargetPaths;_SplitProjectReferencesByFileExistence"> <!-- Get items from child projects first. --> <MSBuild Projects="@(_MSBuildProjectReferenceExistent)" Targets="GetCopyToOutputDirectoryItems" Properties="%(_MSBuildProjectReferenceExistent.SetConfiguration); %(_MSBuildProjectReferenceExistent.SetPlatform)" Condition="'@(_MSBuildProjectReferenceExistent)'!=''"> <Output TaskParameter="TargetOutputs" ItemName="_AllChildProjectItemsWithTargetPathNotFiltered"/> </MSBuild> <!-- Remove duplicates. --> <RemoveDuplicates Inputs="@(_AllChildProjectItemsWithTargetPathNotFiltered)"> <Output TaskParameter="Filtered" ItemName="_AllChildProjectItemsWithTargetPath"/> </RemoveDuplicates> <!-- Target outputs must be full paths because they will be consumed by a different project. --> <CreateItem Include="@(_AllChildProjectItemsWithTargetPath->'%(FullPath)')" Exclude= "$(BuildProjectFolderPath)/../../Development/Main/Web/Bin*.pdb; *.refresh; *.vshost.exe; *.manifest; *.compiled; $(BuildProjectFolderPath)/../../Development/Main/Web/Auth/MySoftware.dll; $(BuildProjectFolderPath)/../../Development/Main/Web/BinApp_Web_*.dll;" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='Always' or '%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest'" > <Output TaskParameter="Include" ItemName="AllItemsFullPathWithTargetPath"/> <Output TaskParameter="Include" ItemName="_SourceItemsToCopyToOutputDirectoryAlways" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='Always'"/> <Output TaskParameter="Include" ItemName="_SourceItemsToCopyToOutputDirectory" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest'"/> </CreateItem> </Target> <!-- To modify your build process, add your task inside one of the targets below and uncomment it. Other similar extension points exist, see Microsoft.WebDeployment.targets. <Target Name="BeforeBuild"> </Target> <Target Name="BeforeMerge"> </Target> <Target Name="AfterMerge"> </Target> <Target Name="AfterBuild"> </Target> --> </Project> I want to build everything that the builtin Deploy project is doing for me. But I don't want the generated web project as it contains App_Web_xxxx.dll assemblies instead of a single compiled assembly. How can I do this?

  Read the article

• Saving in mongoDb with Mongoose, unexpected elements saved

  - by guiomie

  When I write in my mongoDB with mongoose the operation is treated with success, my document is saved, but there is also all kind of weird other sutff written down. It seems to be mongoose code. What could cause this? I add stuff in a specific array with: resultReference.ref[arrayLocation].allEvents.push(theEvent); {id: 11, allEvents: [] } is the structure of a ref element, and I push theEvent in the allEvents array. I then resultReference.save() I use express, mongoose and mongoHQ for database. I tried on a local mongo server, and this annoyance is still there. I've print in my console the document to write before save() and non of this weird code is there. { id 11 allEvents [ 0 { _events { maxListeners 0 } _doc { _id {"$oid": "4eb87834f54944e263000003"} title "Test" allDay false start 2011-11-10 13:00:00 UTC end 2011-11-10 15:00:00 UTC url "/test/4eb87834f54944e263000002" color "#99CCFF" ref "4eb87834f54944e263000002" } _activePaths { paths { title "modify" allDay "modify" start "modify" end "modify" url "modify" color "modify" ref "modify" } states { init { } modify { title true allDay true start true end true url true color true ref true } require { } } stateNames [ 0 "require" 1 "modify" 2 "init" ] } _saveError null _validationError null isNew true _pres { save [ 0 function (next) { // we keep the error semaphore to make sure we don't // call `save` unnecessarily (we only need 1 error) var subdocs = 0 , error = false , self = this; var arrays = this._activePaths .map('init', 'modify', function (i) { return self.getValue(i); }) .filter(function (val) { return (val && val instanceof DocumentArray && val.length); }); if (!arrays.length) return next(); arrays.forEach(function (array) { subdocs += array.length; array.forEach(function (value) { if (!error) value.save(function (err) { if (!error) { if (err) { error = true; next(err); } else --subdocs || next(); } }); }); }); } 1 "function checkForExistingErrors(next) { if (self._saveError){ next(self._saveError); self._saveError = null; } else { next(); } }" 2 "function validation(next) { return self.validate.call(self, next); }" ] } _posts { save [ ] } save function () { var self = this , hookArgs // arguments eventually passed to the hook - are mutable , lastArg = arguments[arguments.length-1] , pres = this._pres[name] , posts = this._posts[name] , _total = pres.length , _current = -1 , _asyncsLeft = proto[name].numAsyncPres , _next = function () { if (arguments[0] instanceof Error) { return handleError(arguments[0]); } var _args = Array.prototype.slice.call(arguments) , currPre , preArgs; if (_args.length && !(arguments[0] === null && typeof lastArg === 'function')) hookArgs = _args; if (++_current < _total) { currPre = pres[_current] if (currPre.isAsync && currPre.length < 2) throw new Error("Your pre must have next and done arguments -- e.g., function (next, done, ...)"); if (currPre.length < 1) throw new Error("Your pre must have a next argument -- e.g., function (next, ...)"); preArgs = (currPre.isAsync ? [once(_next), once(_asyncsDone)] : [once(_next)]).concat(hookArgs); return currPre.apply(self, preArgs); } else if (!proto[name].numAsyncPres) { return _done.apply(self, hookArgs); } } , _done = function () { var args_ = Array.prototype.slice.call(arguments) , ret, total_, current_, next_, done_, postArgs; if (_current === _total) { ret = fn.apply(self, args_); total_ = posts.length; current_ = -1; next_ = function () { if (arguments[0] instanceof Error) { return handleError(arguments[0]); } var args_ = Array.prototype.slice.call(arguments, 1) , currPost , postArgs; if (args_.length) hookArgs = args_; if (++current_ < total_) { currPost = posts[current_] if (currPost.length < 1) throw new Error("Your post must have a next argument -- e.g., function (next, ...)"); postArgs = [once(next_)].concat(hookArgs); return currPost.apply(self, postArgs); } }; if (total_) return next_(); return ret; } }; if (_asyncsLeft) { function _asyncsDone (err) { if (err && err instanceof Error) { return handleError(err); } --_asyncsLeft || _done.apply(self, hookArgs); } } function handleError (err) { if ('function' == typeof lastArg) return lastArg(err); if (errorCb) return errorCb.call(self, err); throw err; } return _next.apply(this, arguments); } errors null } ] } ]

  Read the article

• Paypal development. encrypt transactions. php p12

  - by ninchen

  when i take a look at the paypal documentation, they say "Note that the PayPal SDK for PHP does not require SSL encryption". https://developer.paypal.com/docs/classic/api/apiCredentials/#encrypting-your-certificate Is the statement of this phrase, that i don't have to create a p12 certificate when working with php, but use the public_key.pem and paypal_public_key.pem? If yes: Is it secure enough to create the encrypted form input elements without p12 certificate? If no: What do they mean? :-) Before this question came up, i've tested this little programm. http://www.softarea51.com/blog/how-to-integrate-your-custom-shopping-cart-with-paypal-website-payments-standard-using-php/ There is a config file paypal-wps-config.inc.php where i can define the paths to my certificates. // tryed to use // 'paypal_cert.p12 '; $config['private_key_path'] = '/home/folder/.cert/pp/prvkey.pem'; // must match the one you set when you created the private key $config['private_key_password'] = ''; //'my_password'; When i try to use the p12 certificate, openssl_error_string() returns "Could not sign data: error:0906D06C:PEM routines:PEM_read_bio:no start line openssl_pkcs7_sign When i instead use the prvkey.pem without password all works fine. Here is the function, which signs and encrypt the data. function signAndEncrypt($dataStr_, $ewpCertPath_, $ewpPrivateKeyPath_, $ewpPrivateKeyPwd_, $paypalCertPath_) { $dataStrFile = realpath(tempnam('/tmp', 'pp_')); $fd = fopen($dataStrFile, 'w'); if(!$fd) { $error = "Could not open temporary file $dataStrFile."; return array("status" => false, "error_msg" => $error, "error_no" => 0); } fwrite($fd, $dataStr_); fclose($fd); $signedDataFile = realpath(tempnam('/tmp', 'pp_')); **// here the error came from** if(!@openssl_pkcs7_sign( $dataStrFile, $signedDataFile, "file://$ewpCertPath_", array("file://$ewpPrivateKeyPath_", $ewpPrivateKeyPwd_), array(), PKCS7_BINARY)) { unlink($dataStrFile); unlink($signedDataFile); $error = "Could not sign data: ".openssl_error_string(); return array("status" => false, "error_msg" => $error, "error_no" => 0); } unlink($dataStrFile); $signedData = file_get_contents($signedDataFile); $signedDataArray = explode("\n\n", $signedData); $signedData = $signedDataArray[1]; $signedData = base64_decode($signedData); unlink($signedDataFile); $decodedSignedDataFile = realpath(tempnam('/tmp', 'pp_')); $fd = fopen($decodedSignedDataFile, 'w'); if(!$fd) { $error = "Could not open temporary file $decodedSignedDataFile."; return array("status" => false, "error_msg" => $error, "error_no" => 0); } fwrite($fd, $signedData); fclose($fd); $encryptedDataFile = realpath(tempnam('/tmp', 'pp_')); if(!@openssl_pkcs7_encrypt( $decodedSignedDataFile, $encryptedDataFile, file_get_contents($paypalCertPath_), array(), PKCS7_BINARY)) { unlink($decodedSignedDataFile); unlink($encryptedDataFile); $error = "Could not encrypt data: ".openssl_error_string(); return array("status" => false, "error_msg" => $error, "error_no" => 0); } unlink($decodedSignedDataFile); $encryptedData = file_get_contents($encryptedDataFile); if(!$encryptedData) { $error = "Encryption and signature of data failed."; return array("status" => false, "error_msg" => $error, "error_no" => 0); } unlink($encryptedDataFile); $encryptedDataArray = explode("\n\n", $encryptedData); $encryptedData = trim(str_replace("\n", '', $encryptedDataArray[1])); return array("status" => true, "encryptedData" => $encryptedData); } // signAndEncrypt } // PPCrypto The main questions: 1. Is it possible to use p12 cert with php, or is it secure enough to work without it? 2. Why i become an error when using openssl_pkcs7_sign Please help. Greetings ninchen

  Read the article

• How to manage maintenance/bug-fix branches in Subversion when third-party installers are involved?

  - by Mike Spross

  We have a suite of related products written in VB6, with some C# and VB.NET projects, and all the source is kept in a single Subversion repository. We haven't been using branches in Subversion (although we do tag releases now), and simply do all development in trunk, creating new releases when the trunk is stable enough. This causes no end of grief when we release a new version, issues are found with it, and we have already begun working on new features or major changes to the trunk. In the past, we would address this in one of two ways, depending on the severity of the issues and how stable we thought the trunk was: Hurry to stabilize the trunk, fix the issues, and then release a maintenance update based on the HEAD revision, but this had the side effect of releases that fixed the bugs but introduced new issues because of half-finished features or bugfixes that were in trunk. Make customers wait until the next official release, which is usually a few months. We want to change our policies to better deal with this situation. I was considering creating a "maintenance branch" in Subversion whenever I tag an official release. Then, new development would continue in trunk, and I can periodically merge specific fixes from trunk into the maintenance branch, and create a maintenance release when enough fixes are accumulated, while we continue to work on the next major update in parallel. I know we could also have a more stable trunk and create a branch for new updates instead, but keeping current development in trunk seems simpler to me. The major problem is that while we can easily branch the source code from a release tag and recompile it to get the binaries for that release, I'm not sure how to handle the setup and installer projects. We use QSetup to create all of our setup programs, and right now when we need to modify a setup project, we just edit the project file in-place (all the setup projects and any dependencies that we don't compile ourselves are stored on a separate server, and we make sure to always compile the setup projects on that machine only). However, since we may add or remove files to the setup as our code changes, there is no guarantee that today's setup projects will work with yesterday's source code. I was going to put all the QSetup projects in Subversion to deal with this, but I see some problems with this approach. I want the creation of setup programs to be as automated as possible, and at the very least, I want a separate build machine where I can build the release that I want (grabbing the code from Subversion first), grab the setup project for that release from Subversion, recompile the setup, and then copy the setup to another place on the network for QA testing and eventual release to customers. However, when someone needs to change a setup project (to add a new dependency that trunk now requires or to make other changes), there is a problem. If they treat it like a source file and check it out on their own machine to edit it, they won't be able to add files to the project unless they first copy the files they need to add to the build machine (so they are available to other developers), then copy all the other dependencies from the build machine to their machine, making sure to match the folder structure exactly. The issue here is that QSetup uses absolute paths for any files added to a setup project. However, this means installing a bunch of setup dependencies onto development machines, which seems messy (and which could destabilize the development environment if someone accidentally runs the setup project on their machine). Also, how do we manage third-party dependencies? For example, if the current maintenance branch used MSXML 3.0 and the trunk now requires MSXML 4.0, we can't go back and create a maintenance release if we have already replaced the MSXML library on the build machine with the latest version (assuming both versions have the same filename). The only solution I can think is to either put all the third-party dependencies in Subversion along with the source code, or to make sure we put different library versions in separate folders (i.e. C:\Setup\Dependencies\MSXML\v3.0 and C:\Setup\Dependencies\MSXML\v4.0). Is one way "better" or more common than the other? Are there any best practices for dealing with this situation? Basically, if we release v2.0 of our software, we want to be able to release v2.0.1, v2.0.2, and v.2.0.3 while we work on v2.1, but the whole setup/installation project and setup dependency issue is making this more complicated than the the typical "just create a branch in Subversion and recompile as needed" answer.

  Read the article

• Help with understanding why UAC dialog pops up on Win7 for our application

  - by Tim

  We have a C++ unmanaged application that appears to cause a UAC prompt. It seems to happen on Win7 and NOT on Vista Unfortunately the UAC dlg is system modal so I can't attach a debugger to check in the code where it is, and running under msdev (we're using 2008) runs in elevated mode. We put a message box at the start of our program/winmain but it doesn't even get that far, so apparently this is in the startup code. What can cause a UAC notification so early and what other things can I do to track down the cause? EDIT Apparently the manifest is an important issue here, but it seems not to be helping me - or perhaps I am not configuring the manifest file correctly. Can someone provide a sample manifest? Also, does the linker/UAC magic figure out that the program "might" write to the registry and set its UAC requirements based on that? There are code paths that might trigger UAC, but we are not even at that point when the UAC dlg comes up. An additional oddity is that this does not seem to happen on Vista with UAC turned on. Here is a manifest (that I think is/was generated automatically): <?xml version='1.0' encoding='UTF-8' standalone='yes'?> <assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v3"> <security> <requestedPrivileges> <requestedExecutionLevel level='asInvoker' uiAccess='false' /> </requestedPrivileges> </security> </trustInfo> <dependency> <dependentAssembly> <assemblyIdentity type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*' /> </dependentAssembly> </dependency> <dependency> <dependentAssembly> <assemblyIdentity type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='x86' publicKeyToken='6595b64144ccf1df' language='*' /> </dependentAssembly> </dependency> </assembly> And then this one was added to the manifest list to see if it would help <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="1.0.0.0" processorArchitecture="x86" name="[removed for anonymity]" type="win32" /> <description> [removed for anonymity] </description> <dependency> <dependentAssembly> <assemblyIdentity type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" processorArchitecture="x86" publicKeyToken="6595b64144ccf1df" language="*" /> </dependentAssembly> </dependency> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v2"> <security> <requestedPrivileges> <requestedExecutionLevel level="asInvoker" uiAccess="false"/> </requestedPrivileges> </security> </trustInfo> </assembly> The following is from the actual EXE using the ManifestViewer tool - <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="1.0.0.0" processorArchitecture="x86" name="[removed]" type="win32" /> <description>[removed]</description> - <dependency> - <dependentAssembly> <assemblyIdentity type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" processorArchitecture="x86" publicKeyToken="6595b64144ccf1df" language="*" /> </dependentAssembly> </dependency> - <dependency> - <dependentAssembly> <assemblyIdentity type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" processorArchitecture="*" publicKeyToken="6595b64144ccf1df" language="*" /> </dependentAssembly> </dependency> - <trustInfo xmlns="urn:schemas-microsoft-com:asm.v2"> - <security> - <requestedPrivileges> <requestedExecutionLevel level="asInvoker" uiAccess="false" /> </requestedPrivileges> </security> </trustInfo> </assembly> It appears that it might be due to the xp compatibility setting on our app. I'll have to test that. (we set that in the installer I found out because some sound drivers don't work correctly on win7)

  Read the article

• Trouble Upgrading Rails 2 Routes for a Redmine Plugin

  - by user1858628

  I am trying to get a Redmine plugin designed for Rails 2 to work with Rails 3. https://github.com/dalyons/redmine-todos-scrum-plugin I've pretty much fixed most parts, but having no success whatsoever in getting the routes to work. The original routes for Rails 2 are as follows: map.resources :todos, :name_prefix => 'project_', :path_prefix => '/projects/:project_id', :member => {:toggle_complete => :post }, :collection => {:sort => :post} map.resources :todos, :name_prefix => 'user_', :path_prefix => '/users/:user_id', :controller => :mytodos, :member => {:toggle_complete => :post }, :collection => {:sort => :post} map.my_todos 'my/todos', :controller => :mytodos, :action => :index map.connect 'projects/:project_id/todos/show/:id', :controller => "todos", :action => "show" rake routes outputs the following: sort_project_todos POST /projects/:project_id/todos/sort(.:format) {:controller=>"todos", :action=>"sort"} project_todos GET /projects/:project_id/todos(.:format) {:controller=>"todos", :action=>"index"} POST /projects/:project_id/todos(.:format) {:controller=>"todos", :action=>"create"} new_project_todo GET /projects/:project_id/todos/new(.:format) {:controller=>"todos", :action=>"new"} toggle_complete_project_todo POST /projects/:project_id/todos/:id/toggle_complete(.:format) {:controller=>"todos", :action=>"toggle_complete"} edit_project_todo GET /projects/:project_id/todos/:id/edit(.:format) {:controller=>"todos", :action=>"edit"} project_todo GET /projects/:project_id/todos/:id(.:format) {:controller=>"todos", :action=>"show"} PUT /projects/:project_id/todos/:id(.:format) {:controller=>"todos", :action=>"update"} DELETE /projects/:project_id/todos/:id(.:format) {:controller=>"todos", :action=>"destroy"} sort_user_todos POST /users/:user_id/todos/sort(.:format) {:controller=>"mytodos", :action=>"sort"} user_todos GET /users/:user_id/todos(.:format) {:controller=>"mytodos", :action=>"index"} POST /users/:user_id/todos(.:format) {:controller=>"mytodos", :action=>"create"} new_user_todo GET /users/:user_id/todos/new(.:format) {:controller=>"mytodos", :action=>"new"} toggle_complete_user_todo POST /users/:user_id/todos/:id/toggle_complete(.:format) {:controller=>"mytodos", :action=>"toggle_complete"} edit_user_todo GET /users/:user_id/todos/:id/edit(.:format) {:controller=>"mytodos", :action=>"edit"} user_todo GET /users/:user_id/todos/:id(.:format) {:controller=>"mytodos", :action=>"show"} PUT /users/:user_id/todos/:id(.:format) {:controller=>"mytodos", :action=>"update"} DELETE /users/:user_id/todos/:id(.:format) {:controller=>"mytodos", :action=>"destroy"} my_todos /my/todos {:controller=>"mytodos", :action=>"index"} /projects/:project_id/todos/show/:id {:controller=>"todos", :action=>"show"} The nearest I have got for Rails 3 is follows: scope '/projects/:project_id', :name_prefix => 'project_' do resources :todos, :controller => 'todos' do member do post :toggle_complete end collection do post :sort end end end scope '/users/:user_id', :name_prefix => 'user_' do resources :todos, :controller => 'mytodos' do member do post :toggle_complete end collection do post :sort end end end match 'my/todos' => 'mytodos#index', :as => :my_todos match 'projects/:project_id/todos/show/:id' => 'todos#show' rake routes outputs the following: toggle_complete_todo POST /projects/:project_id/todos/:id/toggle_complete(.:format) todos#toggle_complete {:name_prefix=>"project_"} sort_todos POST /projects/:project_id/todos/sort(.:format) todos#sort {:name_prefix=>"project_"} todos GET /projects/:project_id/todos(.:format) todos#index {:name_prefix=>"project_"} POST /projects/:project_id/todos(.:format) todos#create {:name_prefix=>"project_"} new_todo GET /projects/:project_id/todos/new(.:format) todos#new {:name_prefix=>"project_"} edit_todo GET /projects/:project_id/todos/:id/edit(.:format) todos#edit {:name_prefix=>"project_"} todo GET /projects/:project_id/todos/:id(.:format) todos#show {:name_prefix=>"project_"} PUT /projects/:project_id/todos/:id(.:format) todos#update {:name_prefix=>"project_"} DELETE /projects/:project_id/todos/:id(.:format) todos#destroy {:name_prefix=>"project_"} POST /users/:user_id/todos/:id/toggle_complete(.:format) mytodos#toggle_complete {:name_prefix=>"user_"} POST /users/:user_id/todos/sort(.:format) mytodos#sort {:name_prefix=>"user_"} GET /users/:user_id/todos(.:format) mytodos#index {:name_prefix=>"user_"} POST /users/:user_id/todos(.:format) mytodos#create {:name_prefix=>"user_"} GET /users/:user_id/todos/new(.:format) mytodos#new {:name_prefix=>"user_"} GET /users/:user_id/todos/:id/edit(.:format) mytodos#edit {:name_prefix=>"user_"} GET /users/:user_id/todos/:id(.:format) mytodos#show {:name_prefix=>"user_"} PUT /users/:user_id/todos/:id(.:format) mytodos#update {:name_prefix=>"user_"} DELETE /users/:user_id/todos/:id(.:format) mytodos#destroy {:name_prefix=>"user_"} my_todos /my/todos(.:format) mytodos#index /projects/:project_id/todos/show/:id(.:format) todos#show I am guessing that I am not using :name_prefix correctly, resulting in duplicate paths which are then omitted. Any help would be greatly appreciated.

  Read the article

• UPDATE FOR BI PUBLISHER ENTERPRISE 10.1.3.4.1 MARCH 2010

  - by Tim Dexter

  Latest roll up patch for 10.1.3.4.1 is now out in the wild. Yep, there are bug fixes but the guys have implemented some great enhancements. I'll be covering some of them over the coming weeks, from collapsing bookmarks in your PDFs to better MS AD support to 'true' Excel templates, yes you read that correctly! Patch is available from Oracle's support site. Just search for patch 9546699. Here's the contents and readme, apologies for the big list but at least you can search against it for a particular fix. This patch contains backports of following bugs for BI Publisher Enterprise 10.1.3.4.0 and 10.1.3.4.1. 6193342 - REG:SAMPLE DATA FILE FOR PDF FORM MAPPING IS NOT VALIDATED 6261875 - ERRONEOUS PRECISION VALIDATION ON ONLINE ANALYZER 6439437 - NULL POINTER EXCEPTION WHEN PROCESSING TABLE OF CONTENT 6460974 - BACS EFT PAYMENT INSTRUCTION OUTPUT FILE IS EMPTY 6939721 - BIP: REPORT BUSTING DELIVERY KEY VALUES CANNOT CONTAIN SEVERAL SPECIAL CHARACTER 6996069 - USING XML DB FOR BI REPOSITORY FAILS WITH RESOURCENOTFOUNDEXCEPTION 7207434 - TIMEZONE:SHOULD NOT DO TIMEZONE CONVERSION AGAINST CANONICAL DATE YYYY-MM-DD 7371531 - SUPPORT FOR CSV OUTPUT FOR STRUCTURED XML AND NON SQL DATA SOURCES 7596148 - ER: LDAP FOR MS AD TO SEARCH FROM AD ROOT 7646139 - WEBSERVICES ERROR 7829516 - BIP STANDALONE FAILS TO BURST USING XSL-FO TEMPLATES 8219848 - PDF TEMPLATE REPORT NOT PERFORMING PAGE BREAK 8232116 - PARAMETER VALUE IS PASSED AS NULL,IF IT CONTAINS 'AND' WITHIN THE STRING 8250690 - NOT ABLE TO UPLOAD TEMPLATE VIA BIP API 8288459 - ER: QUERY BUILDER OPTION TO NOT INCLUDE TABLENAME. PREFIX IN SQL 8289600 - REPORT TITLE AND DESCRIPTION CAN'T SUPPORT MULTIPLE LANGUAGES 8327080 - CAN NOT CONFIGURE ORACLE EBUSINESS SUITE SECURITY MODEL WITH ORACLE RAC 8332164 - AN XDO PROPERTY TO ENABLE DEBUG LOGGING 8333289 - WEB SERVICE JOBS FAIL AFTER BIP STARTED UP 8340239 - HTTP NOTIFY IS MISSING IN SCHEDULEREPORTREQUEST 8360933 - UNABLE TO USE LOGGED IN BI USER AS THE WSSECURITY USERNAME IN A VARIABLE FORMAT 8400744 - ADMINISTRATOR USER DOES NOT HAVE FULL ADMINISTRATOR RIGHTS 8402436 - CRASH CAUSED BY UNDETERMINED ATTRKEY ERROR IN MULTI-THREADED 8403779 - IMPOSSIBLE TO CONFIGURE PARAMETER FOR A REPORT 8412259 - PDF, RTF OUTPUT NOT HANDLING THE TABLE BORDER AND CONTENT OVERFLOWS TO NEXT PAGE 8483919 - DYNAMIC DATASOURCE WEBSERVICE SHOULD WORK WITH SERVERSIDE CONNECTIONS 8444382 - ID ATTRIBUTE IN TITLE-PAGE DOES NOT WORK WITH SELECTACTION PROPERTY 8446681 - UI LANGUAGE IS NOT REFLECTED AT THE FIRST LOG IN 8449884 - PUBLICREPORTSERVICE FAILS ON EMAIL DELIVERY USING BIP 10.1.3.4.0D+ - NPE 8454858 - DB: XMLP_ADMIN CAN SEE ALL THE FOLDERS BUT ONLY HAS VIEW PERMISSIONS 8458818 - PDFBOOKBINDER FAILS WITH OUTOFMEMORY ERROR WHEN TRYING TO BIND > 1500 PDFS 8463992 - INCORRECT IMPLEMENTATION OF XLIFF SPECIFICATION 8468777 - BI PUBLISHER QUERY BUILDER NOT LOADING SCHEMA OBJECTS 8477310 - QUERY BUILDER NOT WORK WITH SSL ON STANDALONE OC4J 8506701 - POSITIVE PAY FILE WITH OPTIONS NOT CREATING FILE CHECKS OVER 2500 8506761 - PERFORMANCE: PDFBOOKBINDER CLASS TAKES 4 HOURS TO BIND 4000 PAGES 8535604 - NPE WHEN CLICKING "ANALYZER FOR EXCEL" BUTTON IN ALL_* REPORTS 8536246 - REMOVE-PDF-FIELDS DOES NOT WORK WITH CHECKBOXES WITH OPT ARRAY 8541792 - NULLPOINTER EXCEPTION WHILE USING SFTP PROTOCOL 8554443 - LOGGING TIME STAMP IN 10G: THE HOUR PART IS WRONG 8558007 - UNABLE TO LOGIN BIP WITH UNPRIVILEGED USER WHEN XDB IS USED FOR REPORSITORY STOR 8565758 - NEED TO CONNECT IMPERSONATION TO DATA SOURCE WITH PL/SQL FUNCTION 8567235 - EFTPROCESSOR AND XDO DEBUG ENABLED CAUSES ORG.XML.SAX.SAXPARSEEXCEPTION 8572216 - EFTPROCESSOR NOT THREAD SAFE - CAUSING CORRUPTED REPORTS TO BE GENERATED 8575776 - LANDSCAPE REPORT ORIENTAION NOT SELECTED WHEN REPORT IS PRINTED WITH PS 8588330 - XLIFF GENERATING WITH WRONG MAXWIDTH ATTRIBUTE IN SOME TRANS-UNITS 8584446 - EFTGENERATOR DOES NOT USE XSLT SCALABILITY - JAVA.LANG.OUTOFMEMORY EXCEPTION 8594954 - ENG: BIP NOTIFY MESSAGE BECOMES ENGLISH 8599646 - ER:EXTRA SPACE ADDED BELOW IMAGE IN A TABLE CELL OF TEMPLATE IN FIREFOX 8605110 - PDFSIGNATURE API ENCOUNTERS JAVA.LANG.NULLPOINTEREXCEPTION ON PDF WITH WATERMARK 8660915 - BURSTING WITH DATA TEMPLATE NOT WORKING WITH OPTION: VALUE=FALSE 8660920 - ER: EXTRACT XHTML DATA USING XDODTEXE IN XHTML FORMAT 8667150 - PROBLEM WITH 3RD APPLICATION ABOUT PDF GENERATED WITH BI PUBLISHER 8683547 - "CLICK VIEW REPORT BUTTON TO GENERATE THE REPORT" MESSAGE IS DISPLAYED 8713080 - SEARCH" PARAMETER IS NOT SHOWING NON ENGLISH DATA IN INTERNET EXPLORER 8724778 - EXCEL ANALYZER PARAMETERS DO NOT WORK WITH EXCEL 2007 8725450 - UIX 2.3.6.6 UPTAKE FOR 10.1.3.4.1 8728807 - DYNAMIC JDBC DATA SOURCE WITH PRE-PROCESS FUNCTION BASED ON EXISTING DATA SOURCE 8759558 - XDO TEMPLATE SHOWS CURRENCY IN WRONG FORMAT FOR DUNNING 8792894 - EFTPROCESSOR DOES NOT SUPPORT XSL TEMPLATE AS INPUTSTREAM 8793550 - BIP GENERATES CSV REPORTS OUTPUT FORMAT WITH EXTENTION .OUT NOT .CSV IN EMAIL 8819869 - PERIOD CLOSE VALUE SUMMARY REPORT (XML) RUNNING INTO WARNING 8825732 - MY FOLDERS LINK BROKEN WITH USER NAME THAT INCLUDES A SLASH (/) OBIEE SECURITY 8831948 - TRYING TO GENERATE A SCATTER PLOT USING THE CHART WIZARD 8842299 - SEEDED QUERY ALWAYS RETURNS RESULTS BASED ON FIRST COLUMN 8858027 - NODE.GETTEXTCONTEXT() NOT AVAILABLE IN 10G UNDER OC4J 8859957 - REPORT TITLE ALIGNMENT GOES BAD FOR REPORTS WITH XLIFF FILE ATTACHED 8860957 - ER: IMPROVE PERFORMANCE OF ANSWERS PARAMETERS 8891537 - GETREPORTPARAMETERS WEB SERVICE API ISSUES WITH OAAM REPORTS 8891558 - GETTING SQLEXCEPTION IN GENERATEREPORT WEB SERVICE API ON OAAM REPORTS 8927796 - ER: DYANAMIC DATA SOURCE SUPPORT BY DATA SOURCE NAME 8969898 - BI PUBLISHER WEB SERVICE GETREPORTPARAMETERS DOES NOT TRANSLATE PARAMETER LABEL 8998967 - MULTIPLE XSL PREDICATES ELEMENT[A='A'] [B='B'] CAUSES XML-22019 ERROR 9012511 - SCALABLE MODE IS NOT WORKING IN XMLPUBLISHER 10.1.3.4 9016976 - ER: PRINT XSL-T AND FOPROCESSING TIMING INFORMATION 9018580 - WEB SERVICE CALL FAILS WHEN REPORT INCLUDES SEARCH TYPE 9018657 - JOB FAILS WHEN LOV QUERY CONTAINS BIND VARIABLES :XDO_USER_UI_LOCALE 9021224 - PERFORMANCE ISSUE TO VIEW DASHBOARD PAGE WITH BIP REPORT LINKS 9022440 - ER: SUPPORT "COMB OF N CHARACTERS" FEATURE PDF FORM TEXT FIELDS 9026236 - XPATH DOES NOT WORK CORRECTLY IN 10.1.3.4.1 9051652 - FILE EXTENSION OF CSV OUTPUT IS TXT WHEN IT IS EXPORTED FROM REPORT VIEWER 9053770 - WHEN SENDING CSV REPORT OUTPUT BY EMAIL SOMETIMES IT IS SENT WITHOUT EXTENSION 9066483 - PDFBOOKBINDER LEAVE SOME TEMPORARY FILES AFTER MERGING TITLE PAGE OR TOC 9102420 - USE RELATIVE PATHS IN HYPERLINKS 9127185 - CHECKBOX NOT WORK ON SUB TEMPLATE 9149679 - BASE URL IS NOT PASSED CORRECTLY 9149691 - PROVIDE A WAY TO DISABLE THE ABILITY TO CREATE SCHEDULED REPORT JOB "PUBLIC" 9167822 - NOTIFICATION URL BREAKS ON FOLDER NAMES WITH SPACES 9167913 - CHARTS ARE MISSING IN PDF OUTPUTS WHEN THE DEFAULT OUTPUT FORMAT IS NOT A PDF 9217965 - REPORT HISTORY TAKES LONG TIME TO RENDER THE PAGE 9236674 - BI PUBLISHER PARAMETERS DO NOT CASCADE REFRESH AFTER SECOND PARAMETER 9283933 - OPTION TO COLLAPSE PDF OUTPUT BOOKMARKS BY DEFAULT 9287245 - SAVE COMPLETED SCHEDULED REPORTS IN ITS REPORT NAME AND NOT IN A GENERIC NAME 9348862 - ADD FEATURE TO DISABLE THE XSLT1.0-COMPATIBILITY IN RTF TEMPLATE 9355897 - ER: NEED A SAFE DIVIDE FUNCTION 9364169 - UIX 2.3.6.6 PATCH UPTAKE FOR 10.1.3.4.1 9365153 - LEADING WHITESPACE CHARACTERS IN A FIELD TRIMMED WHEN RUN VIEW OR EXPORT TO .CSV 9389039 - LONG TEXT IS NOT WRAPPED PROPERLY IN THE AUTOSHAPE ON RTF TEMPLATE 9475697 - ENH: SUB-TEMPLATE:DYNAMIC VARIABLE WITH PARAMETER VALUE IN CALL-TEMPLATE CLAUSE 9484549 - CHANGE DEFAULT FOR "XSLT1.0-COMPATIBILITY" TO FALSE FOR 10G 9508499 - UNABLE TO READ EXCEL FILE IF MORE THAN 1800 ROWS GENERATED 9546078 - EMAIL DELIVERY INFORMATION SHOULD NOT BE SAVED AND AUTO-FED IN JOB SUBMISSION 9546101 - EXCEPTION OCCURS WHEN SFTP/FTP REMOTE FILENAME DOSE NOT CONTAIN A SLASH '/' 9546117 - SFTP REPORT DELIVERY FAILS WITH NO CLASS DEF FOUND EXCEPTION ON WEBLOGIC 9.2 Following bugs are included in 10.1.3.4.1 and they are only applied to 10.1.3.4.0. 4612604 - FROM EDGE ATTRIBUTE OF HEADER AND FOOTER IS NOT PRESERVED 6621006 - PARAMNAMEVALUE ELEMENT DEFINITION SHOULD HAVE PARAMETER TYPE 6811967 - DATE PARAMETER NOT HANDLING DATE OFFSET WHEN PASSED UPPERCASE Z FOR OFFSET 6864451 - WHEN BIP REPORTS TIMEOUT, THE PROCESS TO LOG BACK IN IS NOT USER FRIENDLY 6869887 - FUSION CURRENCY BRD:4.1.4/4.1.6 OVERRIDINDG MASK /W XSLT._XDOCURMASKS /W SYMBOL 6959078 - "TEXT FIELD CONTAINS COMMA-SEPARATED VALUES" DOESN'T WORK IN CASE OF STRING 6994647 - GETTING ERROR MESSAGE SAYING JOB FAILED EVEN THOUGH WORKS OK IN BI PUBLISHER 7133143 - ENABLE USER TO ENTER 'TODAY' AS VALUE TO DATE PARAMETER IN SCHEDULE REPORT UI 7165117 - QA_BIP_FUNC:-CLOSED LIFE TIME REPORT ERROR MESSAGE IN CMD 7167068 - LEADER-LENGTH OR RULE-THICKNESS PROPRTY IS TOO LARGE 7219517 - NEED EXTENSION FUNCTIONS TO URL ENCODE TEXT STRING. 7269228 - TEMPLATEHELPER PRODUCES A GARBLED OUTPUT WHEN INVOKED BY MULTIPLE THREADS 7276813 - GETREPORTPARAMETERSRETURN ELEMENT SHOULD HAVE DEFAULT VALUE 7279046 - SCHDEULER:UNABLE TO DELETE A JOB USING API 7280336 - ER: BI PUBLISHER - SITEMINDER SUPPORT - GENERIC NON-ORACLE SSO SUPPORT 7281468 - MODIFY SQL SERVER PROPERTIES TO USE HYP DATA DIRECT IN JDBCDEFAULTS.XML 7281495 - PLEASE ADD SUPPORTED DBS TO JDBCDEFAULT.XML AND LIST EACH DB VERSION SEPARATELY 7282456 - FUSION CURRENCY BRD 4.1.9.2: CURRENCY AMOUTS SHOULD NOT BE WRAPPED. MINUS SIGN 7282507 - FUSION CURRENCY BRD4.1.2.5:DISPLAY CURRENCY AND LOCALE DERIVED CURRENCY SYMBOL 7284780 - FUSION CURRENCY BRD 4.1.12.4 CORRECTLY ALIGN NEGATIVE CURRENCY AMOUNTS 7306874 - OPP ERROR - JAVA.LANG.OUTOFMEMORYERROR: ZIP002:OUTOFMEMORYERROR, MEM_ERROR 7309596 - SIEBELCRM: BIP ENHANCEMENT REQUEST FOR SIEBEL PARAMETERIZATION 7337173 - UI LOCALE IS ALWAYS REWRITTEN TO EN WHEN MOVE FROM DASHBOARD 7338349 - REG:ANALYZER REPORT WITH AVERAGE FUNCTION FAIL TO RUN FOR NON INTERACTIVE FORMAT 7343757 - OUTPUT FORMAT OF TEMPLATES IS NOT SAVING 7345989 - SET XDK REPLACEILLEGALCHARS AND ENHANCE XSLTWRAPPER WARNING 7354775 - UNEXPECTED BEHAVIOR OF LAYOUT TEMPLATE PARAMETER OF RUNREPORT WEBSERVICES API 7354798 - SEQUENCE ORDER OF PARAMETERS FOR THE RUNREPORT WEBSERVICES API 7358973 - PARALLEL SFTP DELIVERY FAILS DUE TO SSHEXCEPTION: CORRUPT MAC ON INPUT 7370110 - REGN:FAIL WHEN USE JNDI TO XMLDB REPORT REPOSITORY 7375859 - NEW WEBSERVICE REQUIRED FOR RUNREPORT 7375892 - REQUIRE NEW WEBSERVICE TO CHECK IF REPORTFOLDER EXISTS 7377686 - TEXT-ALIGN NOT APPLIED IN PDF IN HEBREW LOCALE 7413722 - RUNREPORT API DOES NOT PASS BACK ANY GENERATED EXCEPTIONS TO SCHEDULEREPORT 7435420 - FUSION CURRENCY: SUPPORT MICROSOFT(JAVA) FORMAT MASK WITH CURRENCY 7441486 - ER: ADD PARAMETER FOR SFTP TO BURSTING QUERY 7458169 - SSO WITH OID LDAP COULD NOT FETCH OID ROLES 7461161 - EMAIL DELIVERY FAILS - DELIVERYEXCEPTION: 0 BYTE AVAILABLE IN THE GIVEN INPU 7580715 - INCORRECT FORMATTING OF DATES IN TIMEZONE GMT+13 7582694 - INVALID MAXWIDTH VALUE CAUSES NLS FAILURES 7583693 - JAVA.LANG.NULLPOINTEREXCEPTION RAISED WHEN GENERATING HRMS BENEFITS PDF REPORT 7587998 - NEWLY CREATED USERS IN OID CANT ACCESS REPORTS UNTILL BI PUBLISHER IS RESTARTED 7588317 - TABLE OF CONTENT ALWAYS IN THE SAME FONT 7590084 - REMOVING THE BIP ENTERPRISE BANNER BUT KEEPING THE REPORTS & SCHEDULES TAB 7590112 - SOMEONE NOT PRIVILEGED ACCESS BIP DIRECTLY SHOULD GET A CUSTOM PAGE 7590125 - AUTOMATING CREATION OF USERS AND ROLES 7597902 - TIMEZONE SUPPORT IN RUNREPORT WEBSERVICE API 7599031 - XML PUBLISHER SUM(CURRENT-GROUP()) FAILS 7609178 - ISSUE WITH TAGS EXTRACTED FROM RTF TEMPLATE 7613024 - HEADER/FOOTER SETTINGS OF RTF TEMPLATE ARE NOT RETAINING IN THE RTF OUTPUT 7623988 - ADD XSLT FUNCTION TO PRINT XDO PROPERTIES 7625975 - RETRIEVING PARAMETER LOV FROM RTF TEMPLATE 7629445 - SPELL OUT A NUMBER INTO WORDS 7641827 - ANALYTICS FROZED AFTER PAGE TAB WHICH INCLUDES [BI PUBLISHER REPORT] WERE CLICKE 7645504 - BIP REPORT FROZED AFTER THE SAME DASHBOARD BIP REPORTS WERE CLICKED SIMULTANEOUS 7649561 - RECEIVE 'TO MANY OPEN FILE HANDLES' ERROR CAUSING BI TO CRASH 7654155 - BIP REMOVES THE FIRST FILE SEPARATOR WHEN RE-ENTER REPOSITORY LOCATION IN ADMIN 7656834 - NEED AN OPTION TO NOT APPEND SCHEMA NAME IN GENERATED QUERY 7660292 - ER: XDOPARSER UPGRADE TO XDK 11G 7687862 - BIP DATA EXTRACTING ENHANCEMENT FOR SIEBEL BIP INTEGRATION 7694875 - ADMINISTRATOR IS SUPER USER WHETHER CONFIGURED MANDATORY_USER_ROLE OR NOT 7697592 - BI PUBLISHER STRINGINDEXOUTOFBOUNDSEXCEPTION WHEN PRINTING LABEL FROM SIM 7702372 - ARABIC/ENGLISH NUMBER/DATE PROBLEM, TOTAL PAGE NUMBER NOT RENDERED IN ENGLISH 7707987 - OUTOFMEMORY BURSTING A BI PUBLISHER REPORT BI SERVER DATA SOURCE 7712026 - ER: CHANGE CHART OUTPUT FORMAT TO PNG IN HTML OUTPUT 7833732 - THE 'SEARCH' PARAMETER TYPE CANNOT BE USED IN IE6 UNDER WINDOWS 8214839 - ER: INCREASE COLUMN SIZE IN SCHEDULER TABLE XMLP_SCHED_JOB 8218271 - ISSUES WHILE CONVERTING EXCEL TO XML 8218452 - BI PUBLISHER STANDALONE : GRAPHICS WITHOUT COLORS IF MORE THAN 33 PAGES 8250980 - USER WITH XMLP_ADMIN RESPONSIBILITY IS NOT ABLE TO EDIT REPORT IN BIP 8262410 - IMPOSSIBLE TO PRINT PDF CREATED BY BI PUBLISHER VIA 3RD PARTY PDF APPLICATION 8274369 - QA: CANNOT DELETE EMAIL SERVER UNDER DELIVERY CONFIGURATION 8284173 - FO:VISIBILITY="HIDDEN" DOESN'T WORK WITH FO:PAGE-NUMBER-CITATION 8288421 - THE VALUE OF VIEW BY GO BACK TO MY HISTORY IN SCHEDULES TAB 8299212 - REG: THE SPECIFICAL BI USER DIDN'T GET THE CORRECT REPORT HISTORY 8301767 - ORA-01795 ERROR OCCURED AFTER ACCESSING DASHBOARD PAGE WHICH INCLUDES BIP 8304944 - ADD SIEBEL SECURITY MODEL IN BI PUBLISHER 10.1.3.4.1 8312814 - QA:HOT:OBI SERVER JDBC DRIVER BIJDBC14.JAR IN XMLPSERVER.WAR IS INCORRECT 8323679 - BI PUBLISHER SENDS HTML REPORT TO OUTLOOK CLIENT AS ATTACHMENT NOT INLINE 8370794 - HISTORY OF COMPLETED SCHEDULER JOBS STILL SHOW ONE AS RUNNING ON CLUSTER ENV 8390970 - OUT OF MEMORY EXCEPTION RAISED, WHILE SAVING THE DATA 8393681 - CHECKBOX IS SHOWING UP AS CHECKED WHEN DATA IS NOT CHECKED VALUE 8725450 - UIX 2.3.6.6 UPTAKE FOR 10.1.3.4.1 UIX fixes: 6866363 - SUPPORT FOR JAVA DATE FORMAT AS PER JDK 1.4 AND ABOVE 6829124 - DATE PARAMETER NOT HANDLING DATE OFFSET AS PER JAVA STANDARDS ---------------------------- INSTALLATION FOR ENTERPRISE ---------------------------- Upgrade from 10.1.3.4.0d (patch 8284524, 8398280) and 10.1.3.4.1 does not require step 8 and step 9. 1 - Make a backup copy of the xmlp-server-config.xml file located in <application installation>/WEB-INF/ directory, where your application server unpacked the BI Publisher war or ear file. Example: In an Oracle AS/OC4J 10.1.3 deployment, the location is <ORACLE_HOME>/j2ee/home/applications/xmlpserver/xmlpserver/WEB-INF/xmlp-server-config.xml 2 - Back up all the directories under the BI Publisher repository (for example: {Oracle_Home}/xmlp/XMLP). 3 - If you are using Scheduling, back up your existing BI Publisher Scheduler schema. 4 - Shut down BI Publisher. 5 - Undeploy the BI Publisher application ("xmlpserver") from your J2EE application server. See your application server documentation for instructions how to undeploy an application. 6 - Deploy the 10.1.3.4 xmlpserver.ear or xmlpserver.war to your application server. See "Manually Installing BI Publisher to Your J2EE Application Server" secition of BI Publisher Installation Guide for guidelines for your application server type. 7 - Copy the saved backup copy of the xmlp-server-config.xml file from step 1 to the newly created BI Publisher <application installation>/WEB-INF/ directory, where your application server unpacked the BI Publisher war or ear file. Example: In an Oracle AS/OC4J 10.1.3 deployment, the location is <ORACLE_HOME>/j2ee/home/applications/xmlpserver/xmlpserver/WEB-INF/xmlp-server-config.xml 8 - Copy ssodefaults.xml to the following directory. And replace [host]:[port] with your server's information. Default values for other properties can be updated depending on your configuration. <Existing Repository>\XMLP\Admin\Security 9 - Copy database-config.xml to the following directory. <Existing Repository>\XMLP\Admin\Scheduler 10 - Restart xmlpserver application or Application Server ---------------------------------- IBM WEBSPHERE 6.1 DEPLOYMENT NOTE ---------------------------------- When users fail to log on to BI Publisher with "HTTP 500 Internal Server Error" on WebSphere 6.1, you must change Class Loader configuration to avoid the error. (bug7506253 - XMLPSERVER WON'T START AFTER DEPLOYMENT TO WEBSPHERE 6.1) SystemErr.log: java.lang.VerifyError: class loading constraint violated (class: oracle/xml/parser/v2/XMLNode method: xdkSetQxName(Loracle/xml/util/QxName;)V) at pc: 0 .... Class Loader Configuration Steps: 1 - Login to WebSphere Admin console. Click Enterprise Applications under Applications menu 2 - Click xmlpserver application name from the list 3 - Select "Class loading and update detection" 4 - Update class loader configuration as follows in Class Loader -> General Properties * Polling interval for updated files: [0] Seconds * Class loader order: [x] Classes loaded with application class loader first * WAR class loader policy: [x] Single class loader for application 5 - Apply this change and save the new configuration. 6 - Restart xmlpserver application Please refer to WebSphere 6.1 documentation for more details. "http://publib.boulder.ibm.com/infocenter/wasinfo/v6r1/index.jsp?topic=/com.ibm.websphere.base.doc/info/aes/ae/trun_classload_entapp.html"> http://publib.boulder.ibm.com/infocenter/wasinfo/v6r1/index.jsp?topic=/com.ibm.websphere.base.doc/info/aes/ae/trun_classload_entapp.html ------------------------------------------------------- Oracle WebLogic Server 11g R1 (10.3.1) Deployment NOTE ------------------------------------------------------- If you are deploying BI Publisher to WebLogic Server 10.3.1, you must add the following setting at startup for the domain that contains the BI Publisher server in the /weblogic_home/user_projects/domains/base_domain/bin/startWebLogic.sh script : -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform This setting is required to enable BI Publisher to find the TopLink JAR files to create the Scheduler tables.

  Read the article

• Solaris 11.1: Changes to included FOSS packages

  - by alanc

  Besides the documentation changes I mentioned last time, another place you can see Solaris 11.1 changes before upgrading is in the online package repository, now that the 11.1 packages have been published to http://pkg.oracle.com/solaris/release/, as the “0.175.1.0.0.24.2” branch. (Oracle Solaris Package Versioning explains what each field in that version string means.) When you’re ready to upgrade to the packages from either this repo, or the support repository, you’ll want to first read How to Update to Oracle Solaris 11.1 Using the Image Packaging System by Pete Dennis, as there are a couple issues you will need to be aware of to do that upgrade, several of which are due to changes in the Free and Open Source Software (FOSS) packages included with Solaris, as I’ll explain in a bit. Solaris 11 can update more readily than Solaris 10 In the Solaris 10 and older update models, the way the updates were built constrained what changes we could make in those releases. To change an existing SVR4 package in those releases, we created a Solaris Patch, which applied to a given version of the SVR4 package and replaced, added or deleted files in it. These patches were released via the support websites (originally SunSolve, now My Oracle Support) for applying to existing Solaris 10 installations, and were also merged into the install images for the next Solaris 10 update release. (This Solaris Patches blog post from Gerry Haskins dives deeper into that subject.) Some of the restrictions of this model were that package refactoring, changes to package dependencies, and even just changing the package version number, were difficult to do in this hybrid patch/OS update model. For instance, when Solaris 10 first shipped, it had the Xorg server from X11R6.8. Over the first couple years of update releases we were able to keep it up to date by replacing, adding, & removing files as necessary, taking it all the way up to Xorg server release 1.3 (new version numbering begun after the X11R7 split of the X11 tree into separate modules gave each module its own version). But if you run pkginfo on the SUNWxorg-server package, you’ll see it still displayed a version number of 6.8, confusing users as to which version was actually included. We stopped upgrading the Xorg server releases in Solaris 10 after 1.3, as later versions added new dependencies, such as HAL, D-Bus, and libpciaccess, which were very difficult to manage in this patching model. (We later got libpciaccess to work, but HAL & D-Bus would have been much harder due to the greater dependency tree underneath those.) Similarly, every time the GNOME team looked into upgrading Solaris 10 past GNOME 2.6, they found these constraints made it so difficult it wasn’t worthwhile, and eventually GNOME’s dependencies had changed enough it was completely infeasible. Fortunately, this worked out for both the X11 & GNOME teams, with our management making the business decision to concentrate on the “Nevada” branch for desktop users - first as Solaris Express Desktop Edition, and later as OpenSolaris, so we didn’t have to fight to try to make the package updates fit into these tight constraints. Meanwhile, the team designing the new packaging system for Solaris 11 was seeing us struggle with these problems, and making this much easier to manage for both the development teams and our users was one of their big goals for the IPS design they were working on. Now that we’ve reached the first update release to Solaris 11, we can start to see the fruits of their labors, with more FOSS updates in 11.1 than we had in many Solaris 10 update releases, keeping software more up to date with the upstream communities. Of course, just because we can more easily update now, doesn’t always mean we should or will do so, it just removes the package system limitations from forcing the decision for us. So while we’ve upgraded the X Window System in the 11.1 release from X11R7.6 to 7.7, the Solaris GNOME team decided it was not the right time to try to make the jump from GNOME 2 to GNOME 3, though they did update some individual components of the desktop, especially those with security fixes like Firefox. In other parts of the system, decisions as to what to update were prioritized based on how they affected other projects, or what customer requests we’d gotten for them. So with all that background in place, what packages did we actually update or add between Solaris 11.0 and 11.1? Core OS Functionality One of the FOSS changes with the biggest impact in this release is the upgrade from Grub Legacy (0.97) to Grub 2 (1.99) for the x64 platform boot loader. This is the cause of one of the upgrade quirks, since to go from Solaris 11.0 to 11.1 on x64 systems, you first need to update the Boot Environment tools (such as beadm) to a new version that can handle boot environments that use the Grub2 boot loader. System administrators can find the details they need to know about the new Grub in the Administering the GRand Unified Bootloader chapter of the Booting and Shutting Down Oracle Solaris 11.1 Systems guide. This change was necessary to be able to support new hardware coming into the x64 marketplace, including systems using UEFI firmware or booting off disk drives larger than 2 terabytes. For both platforms, Solaris 11.1 adds rsyslog as an optional alternative to the traditional syslogd, and OpenSCAP for checking security configuration settings are compliant with site policies. Note that the support repo actually has newer versions of BIND & fetchmail than the 11.1 release, as some late breaking critical fixes came through from the community upstream releases after the Solaris 11.1 release was frozen, and made their way to the support repository. These are responsible for the other big upgrade quirk in this release, in which to upgrade a system which already installed those versions from the support repo, you need to either wait for those packages to make their way to the 11.1 branch of the support repo, or follow the steps in the aforementioned upgrade walkthrough to let the package system know it's okay to temporarily downgrade those. Developer Stack While Solaris 11.0 included Python 2.7, many of the bundled python modules weren’t packaged for it yet, limiting its usability. For 11.1, many more of the python modules include 2.7 versions (enough that I filtered them out of the below table, but you can always search on the package repository server for them. For other language runtimes and development tools, 11.1 expands the use of IPS mediated links to choose which version of a package is the default when the packages are designed to allow multiple versions to install side by side. For instance, in Solaris 11.0, GNU automake 1.9 and 1.10 were provided, and developers had to run them as either automake-1.9 or automake-1.10. In Solaris 11.1, when automake 1.11 was added, also added was a /usr/bin/automake mediated link, which points to the automake-1.11 program by default, but can be changed to another version by running the pkg set-mediator command. Mediated links were also used for the Java runtime & development kits in 11.1, changing the default versions to the Java 7 releases (the 1.7.0.x package versions), while allowing admins to switch links such as /usr/bin/javac back to Java 6 if they need to for their site, to deal with Java 7 compatibility or other issues, without having to update each usage to use the full versioned /usr/jdk/jdk1.6.0_35/bin/javac paths for every invocation. Desktop Stack As I mentioned before, we upgraded from X11R7.6 to X11R7.7, since a pleasant coincidence made the X.Org release dates line up nicely with our feature & code freeze dates for this release. (Or perhaps it wasn’t so coincidental, after all, one of the benefits of being the person making the release is being able to decide what schedule is most convenient for you, and this one worked well for me.) For the table below, I’ve skipped listing the packages in which we use the X11 “katamari” version for the Solaris package version (mainly packages combining elements of multiple upstream modules with independent version numbers), since they just all changed from 7.6 to 7.7. In the graphics drivers, we worked with Intel to update the Intel Integrated Graphics Processor support to support 3D graphics and kernel mode setting on the Ivy Bridge chipsets, and updated Nvidia’s non-FOSS graphics driver from 280.13 to 295.20. Higher up in the desktop stack, PulseAudio was added for audio support, and liblouis for Braille support, and the GNOME applications were built to use them. The Mozilla applications, Firefox & Thunderbird moved to the current Extended Support Release (ESR) versions, 10.x for each, to bring up-to-date security fixes without having to be on Mozilla’s agressive 6 week feature cycle release train. Detailed list of changes This table shows most of the changes to the FOSS packages between Solaris 11.0 and 11.1. As noted above, some were excluded for clarity, or to reduce noise and duplication. All the FOSS packages which didn't change the version number in their packaging info are not included, even if they had updates to fix bugs, security holes, or add support for new hardware or new features of Solaris. Package11.011.1 archiver/unrar 3.8.5 4.1.4 audio/sox 14.3.0 14.3.2 backup/rdiff-backup 1.2.1 1.3.3 communication/im/pidgin 2.10.0 2.10.5 compress/gzip 1.3.5 1.4 compress/xz not included 5.0.1 database/sqlite-3 3.7.6.3 3.7.11 desktop/remote-desktop/tigervnc 1.0.90 1.1.0 desktop/window-manager/xcompmgr 1.1.5 1.1.6 desktop/xscreensaver 5.12 5.15 developer/build/autoconf 2.63 2.68 developer/build/autoconf/xorg-macros 1.15.0 1.17 developer/build/automake-111 not included 1.11.2 developer/build/cmake 2.6.2 2.8.6 developer/build/gnu-make 3.81 3.82 developer/build/imake 1.0.4 1.0.5 developer/build/libtool 1.5.22 2.4.2 developer/build/makedepend 1.0.3 1.0.4 developer/documentation-tool/doxygen 1.5.7.1 1.7.6.1 developer/gnu-binutils 2.19 2.21.1 developer/java/jdepend not included 2.9 developer/java/jdk-6 1.6.0.26 1.6.0.35 developer/java/jdk-7 1.7.0.0 1.7.0.7 developer/java/jpackage-utils not included 1.7.5 developer/java/junit 4.5 4.10 developer/lexer/jflex not included 1.4.1 developer/parser/byaccj not included 1.14 developer/parser/java_cup not included 0.10 developer/quilt 0.47 0.60 developer/versioning/git 1.7.3.2 1.7.9.2 developer/versioning/mercurial 1.8.4 2.2.1 developer/versioning/subversion 1.6.16 1.7.5 diagnostic/constype 1.0.3 1.0.4 diagnostic/nmap 5.21 5.51 diagnostic/scanpci 0.12.1 0.13.1 diagnostic/wireshark 1.4.8 1.8.2 diagnostic/xload 1.1.0 1.1.1 editor/gnu-emacs 23.1 23.4 editor/vim 7.3.254 7.3.600 file/lndir 1.0.2 1.0.3 image/editor/bitmap 1.0.5 1.0.6 image/gnuplot 4.4.0 4.6.0 image/library/libexif 0.6.19 0.6.21 image/library/libpng 1.4.8 1.4.11 image/library/librsvg 2.26.3 2.34.1 image/xcursorgen 1.0.4 1.0.5 library/audio/pulseaudio not included 1.1 library/cacao 2.3.0.0 2.3.1.0 library/expat 2.0.1 2.1.0 library/gc 7.1 7.2 library/graphics/pixman 0.22.0 0.24.4 library/guile 1.8.4 1.8.6 library/java/javadb 10.5.3.0 10.6.2.1 library/java/subversion 1.6.16 1.7.5 library/json-c not included 0.9 library/libedit not included 3.0 library/libee not included 0.3.2 library/libestr not included 0.1.2 library/libevent 1.3.5 1.4.14.2 library/liblouis not included 2.1.1 library/liblouisxml not included 2.1.0 library/libtecla 1.6.0 1.6.1 library/libtool/libltdl 1.5.22 2.4.2 library/nspr 4.8.8 4.8.9 library/openldap 2.4.25 2.4.30 library/pcre 7.8 8.21 library/perl-5/subversion 1.6.16 1.7.5 library/python-2/jsonrpclib not included 0.1.3 library/python-2/lxml 2.1.2 2.3.3 library/python-2/nose not included 1.1.2 library/python-2/pyopenssl not included 0.11 library/python-2/subversion 1.6.16 1.7.5 library/python-2/tkinter-26 2.6.4 2.6.8 library/python-2/tkinter-27 2.7.1 2.7.3 library/security/nss 4.12.10 4.13.1 library/security/openssl 1.0.0.5 (1.0.0e) 1.0.0.10 (1.0.0j) mail/thunderbird 6.0 10.0.6 network/dns/bind 9.6.3.4.3 9.6.3.7.2 package/pkgbuild not included 1.3.104 print/filter/enscript not included 1.6.4 print/filter/gutenprint 5.2.4 5.2.7 print/lp/filter/foomatic-rip 3.0.2 4.0.15 runtime/java/jre-6 1.6.0.26 1.6.0.35 runtime/java/jre-7 1.7.0.0 1.7.0.7 runtime/perl-512 5.12.3 5.12.4 runtime/python-26 2.6.4 2.6.8 runtime/python-27 2.7.1 2.7.3 runtime/ruby-18 1.8.7.334 1.8.7.357 runtime/tcl-8/tcl-sqlite-3 3.7.6.3 3.7.11 security/compliance/openscap not included 0.8.1 security/nss-utilities 4.12.10 4.13.1 security/sudo 1.8.1.2 1.8.4.5 service/network/dhcp/isc-dhcp 4.1 4.1.0.6 service/network/dns/bind 9.6.3.4.3 9.6.3.7.2 service/network/ftp (ProFTPD) 1.3.3.0.5 1.3.3.0.7 service/network/samba 3.5.10 3.6.6 shell/conflict 0.2004.9.1 0.2010.6.27 shell/pipe-viewer 1.1.4 1.2.0 shell/zsh 4.3.12 4.3.17 system/boot/grub 0.97 1.99 system/font/truetype/liberation 1.4 1.7.2 system/library/freetype-2 2.4.6 2.4.9 system/library/libnet 1.1.2.1 1.1.5 system/management/cim/pegasus 2.9.1 2.11.0 system/management/ipmitool 1.8.10 1.8.11 system/management/wbem/wbemcli 1.3.7 1.3.9.1 system/network/routing/quagga 0.99.8 0.99.19 system/rsyslog not included 6.2.0 terminal/luit 1.1.0 1.1.1 text/convmv 1.14 1.15 text/gawk 3.1.5 3.1.8 text/gnu-grep 2.5.4 2.10 web/browser/firefox 6.0.2 10.0.6 web/browser/links 1.0 1.0.3 web/java-servlet/tomcat 6.0.33 6.0.35 web/php-53 not included 5.3.14 web/php-53/extension/php-apc not included 3.1.9 web/php-53/extension/php-idn not included 0.2.0 web/php-53/extension/php-memcache not included 3.0.6 web/php-53/extension/php-mysql not included 5.3.14 web/php-53/extension/php-pear not included 5.3.14 web/php-53/extension/php-suhosin not included 0.9.33 web/php-53/extension/php-tcpwrap not included 1.1.3 web/php-53/extension/php-xdebug not included 2.2.0 web/php-common not included 11.1 web/proxy/squid 3.1.8 3.1.18 web/server/apache-22 2.2.20 2.2.22 web/server/apache-22/module/apache-sed 2.2.20 2.2.22 web/server/apache-22/module/apache-wsgi not included 3.3 x11/diagnostic/xev 1.1.0 1.2.0 x11/diagnostic/xscope 1.3 1.3.1 x11/documentation/xorg-docs 1.6 1.7 x11/keyboard/xkbcomp 1.2.3 1.2.4 x11/library/libdmx 1.1.1 1.1.2 x11/library/libdrm 2.4.25 2.4.32 x11/library/libfontenc 1.1.0 1.1.1 x11/library/libfs 1.0.3 1.0.4 x11/library/libice 1.0.7 1.0.8 x11/library/libsm 1.2.0 1.2.1 x11/library/libx11 1.4.4 1.5.0 x11/library/libxau 1.0.6 1.0.7 x11/library/libxcb 1.7 1.8.1 x11/library/libxcursor 1.1.12 1.1.13 x11/library/libxdmcp 1.1.0 1.1.1 x11/library/libxext 1.3.0 1.3.1 x11/library/libxfixes 4.0.5 5.0 x11/library/libxfont 1.4.4 1.4.5 x11/library/libxft 2.2.0 2.3.1 x11/library/libxi 1.4.3 1.6.1 x11/library/libxinerama 1.1.1 1.1.2 x11/library/libxkbfile 1.0.7 1.0.8 x11/library/libxmu 1.1.0 1.1.1 x11/library/libxmuu 1.1.0 1.1.1 x11/library/libxpm 3.5.9 3.5.10 x11/library/libxrender 0.9.6 0.9.7 x11/library/libxres 1.0.5 1.0.6 x11/library/libxscrnsaver 1.2.1 1.2.2 x11/library/libxtst 1.2.0 1.2.1 x11/library/libxv 1.0.6 1.0.7 x11/library/libxvmc 1.0.6 1.0.7 x11/library/libxxf86vm 1.1.1 1.1.2 x11/library/mesa 7.10.2 7.11.2 x11/library/toolkit/libxaw7 1.0.9 1.0.11 x11/library/toolkit/libxt 1.0.9 1.1.3 x11/library/xtrans 1.2.6 1.2.7 x11/oclock 1.0.2 1.0.3 x11/server/xdmx 1.10.3 1.12.2 x11/server/xephyr 1.10.3 1.12.2 x11/server/xorg 1.10.3 1.12.2 x11/server/xorg/driver/xorg-input-keyboard 1.6.0 1.6.1 x11/server/xorg/driver/xorg-input-mouse 1.7.1 1.7.2 x11/server/xorg/driver/xorg-input-synaptics 1.4.1 1.6.2 x11/server/xorg/driver/xorg-input-vmmouse 12.7.0 12.8.0 x11/server/xorg/driver/xorg-video-ast 0.91.10 0.93.10 x11/server/xorg/driver/xorg-video-ati 6.14.1 6.14.4 x11/server/xorg/driver/xorg-video-cirrus 1.3.2 1.4.0 x11/server/xorg/driver/xorg-video-dummy 0.3.4 0.3.5 x11/server/xorg/driver/xorg-video-intel 2.10.0 2.18.0 x11/server/xorg/driver/xorg-video-mach64 6.9.0 6.9.1 x11/server/xorg/driver/xorg-video-mga 1.4.13 1.5.0 x11/server/xorg/driver/xorg-video-openchrome 0.2.904 0.2.905 x11/server/xorg/driver/xorg-video-r128 6.8.1 6.8.2 x11/server/xorg/driver/xorg-video-trident 1.3.4 1.3.5 x11/server/xorg/driver/xorg-video-vesa 2.3.0 2.3.1 x11/server/xorg/driver/xorg-video-vmware 11.0.3 12.0.2 x11/server/xserver-common 1.10.3 1.12.2 x11/server/xvfb 1.10.3 1.12.2 x11/server/xvnc 1.0.90 1.1.0 x11/session/sessreg 1.0.6 1.0.7 x11/session/xauth 1.0.6 1.0.7 x11/session/xinit 1.3.1 1.3.2 x11/transset 0.9.1 1.0.0 x11/trusted/trusted-xorg 1.10.3 1.12.2 x11/x11-window-dump 1.0.4 1.0.5 x11/xclipboard 1.1.1 1.1.2 x11/xclock 1.0.5 1.0.6 x11/xfd 1.1.0 1.1.1 x11/xfontsel 1.0.3 1.0.4 x11/xfs 1.1.1 1.1.2 P.S. To get the version numbers for this table, I ran a quick perl script over the output from: % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.1.0.0.24` \ | sort /tmp/11.1 % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.0.0.0.2` \ | sort /tmp/11.0

  Read the article

• Why won't xattr PECL extension build on 12.10?

  - by Dan Jones

  I was using the xattr pecl extension in 12.04 (in fact, I think since 10.04) without problem. Not surprisingly, I had to reinstall it after upgrading to 12.10 because of the new version of PHP. But now it fails to build, and I can't figure out why. Other PECL extensions have built fine. And I have libattr1 and libattr1-dev installed. Here's the output from the build: downloading xattr-1.1.0.tgz ... Starting to download xattr-1.1.0.tgz (5,204 bytes) .....done: 5,204 bytes 3 source files, building running: phpize Configuring for: PHP Api Version: 20100412 Zend Module Api No: 20100525 Zend Extension Api No: 220100525 libattr library installation dir? [autodetect] : building in /tmp/pear/temp/pear-build-rootdSMx0G/xattr-1.1.0 running: /tmp/pear/temp/xattr/configure --with-xattr checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib checking for PHP extension directory... /usr/lib/php5/20100525 checking for PHP installed headers prefix... /usr/include/php5 checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... 0.13.5 (ok) checking for gawk... gawk checking for xattr support... yes, shared checking for xattr files in default path... found in /usr checking for attr_get in -lattr... yes checking how to print strings... printf checking for a sed that does not truncate output... (cached) /bin/sed checking for fgrep... /bin/grep -F checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking for gawk... (cached) gawk checking command to parse /usr/bin/nm -B output from cc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating ./config.status config.status: creating config.h config.status: executing libtool commands running: make /bin/bash /tmp/pear/temp/pear-build-rootdSMx0G/xattr-1.1.0/libtool --mode=compile cc -I. -I/tmp/pear/temp/xattr -DPHP_ATOM_INC -I/tmp/pear/temp/pear-build-rootdSMx0G/xattr-1.1.0/include -I/tmp/pear/temp/pear-build-rootdSMx0G/xattr-1.1.0/main -I/tmp/pear/temp/xattr -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /tmp/pear/temp/xattr/xattr.c -o xattr.lo libtool: compile: cc -I. -I/tmp/pear/temp/xattr -DPHP_ATOM_INC -I/tmp/pear/temp/pear-build-rootdSMx0G/xattr-1.1.0/include -I/tmp/pear/temp/pear-build-rootdSMx0G/xattr-1.1.0/main -I/tmp/pear/temp/xattr -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /tmp/pear/temp/xattr/xattr.c -fPIC -DPIC -o .libs/xattr.o /tmp/pear/temp/xattr/xattr.c:50:1: error: unknown type name 'function_entry' /tmp/pear/temp/xattr/xattr.c:51:2: warning: braces around scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: (near initialization for 'xattr_functions[0]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: initialization makes integer from pointer without a cast [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: (near initialization for 'xattr_functions[0]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: error: initializer element is not computable at load time /tmp/pear/temp/xattr/xattr.c:51:2: error: (near initialization for 'xattr_functions[0]') /tmp/pear/temp/xattr/xattr.c:51:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: (near initialization for 'xattr_functions[0]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: (near initialization for 'xattr_functions[0]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: (near initialization for 'xattr_functions[0]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: (near initialization for 'xattr_functions[0]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: braces around scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: (near initialization for 'xattr_functions[1]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: initialization makes integer from pointer without a cast [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: (near initialization for 'xattr_functions[1]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: error: initializer element is not computable at load time /tmp/pear/temp/xattr/xattr.c:52:2: error: (near initialization for 'xattr_functions[1]') /tmp/pear/temp/xattr/xattr.c:52:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: (near initialization for 'xattr_functions[1]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: (near initialization for 'xattr_functions[1]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: (near initialization for 'xattr_functions[1]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: (near initialization for 'xattr_functions[1]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: braces around scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: (near initialization for 'xattr_functions[2]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: initialization makes integer from pointer without a cast [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: (near initialization for 'xattr_functions[2]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: error: initializer element is not computable at load time /tmp/pear/temp/xattr/xattr.c:53:2: error: (near initialization for 'xattr_functions[2]') /tmp/pear/temp/xattr/xattr.c:53:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: (near initialization for 'xattr_functions[2]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: (near initialization for 'xattr_functions[2]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: (near initialization for 'xattr_functions[2]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: (near initialization for 'xattr_functions[2]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: braces around scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: (near initialization for 'xattr_functions[3]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: initialization makes integer from pointer without a cast [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: (near initialization for 'xattr_functions[3]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: error: initializer element is not computable at load time /tmp/pear/temp/xattr/xattr.c:54:2: error: (near initialization for 'xattr_functions[3]') /tmp/pear/temp/xattr/xattr.c:54:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: (near initialization for 'xattr_functions[3]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: (near initialization for 'xattr_functions[3]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: (near initialization for 'xattr_functions[3]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: (near initialization for 'xattr_functions[3]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: braces around scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: (near initialization for 'xattr_functions[4]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: initialization makes integer from pointer without a cast [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: (near initialization for 'xattr_functions[4]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: error: initializer element is not computable at load time /tmp/pear/temp/xattr/xattr.c:55:2: error: (near initialization for 'xattr_functions[4]') /tmp/pear/temp/xattr/xattr.c:55:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: (near initialization for 'xattr_functions[4]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: (near initialization for 'xattr_functions[4]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: (near initialization for 'xattr_functions[4]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: (near initialization for 'xattr_functions[4]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: braces around scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: (near initialization for 'xattr_functions[5]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: initialization makes integer from pointer without a cast [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: (near initialization for 'xattr_functions[5]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: (near initialization for 'xattr_functions[5]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: (near initialization for 'xattr_functions[5]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:67:2: warning: initialization from incompatible pointer type [enabled by default] /tmp/pear/temp/xattr/xattr.c:67:2: warning: (near initialization for 'xattr_module_entry.functions') [enabled by default] /tmp/pear/temp/xattr/xattr.c: In function 'zif_xattr_set': /tmp/pear/temp/xattr/xattr.c:122:49: error: 'struct _php_core_globals' has no member named 'safe_mode' /tmp/pear/temp/xattr/xattr.c:122:92: error: 'CHECKUID_DISALLOW_FILE_NOT_EXISTS' undeclared (first use in this function) /tmp/pear/temp/xattr/xattr.c:122:92: note: each undeclared identifier is reported only once for each function it appears in /tmp/pear/temp/xattr/xattr.c: In function 'zif_xattr_get': /tmp/pear/temp/xattr/xattr.c:171:49: error: 'struct _php_core_globals' has no member named 'safe_mode' /tmp/pear/temp/xattr/xattr.c:171:92: error: 'CHECKUID_DISALLOW_FILE_NOT_EXISTS' undeclared (first use in this function) /tmp/pear/temp/xattr/xattr.c:187:2: warning: passing argument 4 of 'attr_get' from incompatible pointer type [enabled by default] In file included from /tmp/pear/temp/xattr/xattr.c:37:0: /usr/include/attr/attributes.h:122:12: note: expected 'int *' but argument is of type 'size_t *' /tmp/pear/temp/xattr/xattr.c:198:3: warning: passing argument 4 of 'attr_get' from incompatible pointer type [enabled by default] In file included from /tmp/pear/temp/xattr/xattr.c:37:0: /usr/include/attr/attributes.h:122:12: note: expected 'int *' but argument is of type 'size_t *' /tmp/pear/temp/xattr/xattr.c: In function 'zif_xattr_supported': /tmp/pear/temp/xattr/xattr.c:243:49: error: 'struct _php_core_globals' has no member named 'safe_mode' /tmp/pear/temp/xattr/xattr.c:243:92: error: 'CHECKUID_DISALLOW_FILE_NOT_EXISTS' undeclared (first use in this function) /tmp/pear/temp/xattr/xattr.c: In function 'zif_xattr_remove': /tmp/pear/temp/xattr/xattr.c:288:49: error: 'struct _php_core_globals' has no member named 'safe_mode' /tmp/pear/temp/xattr/xattr.c:288:92: error: 'CHECKUID_DISALLOW_FILE_NOT_EXISTS' undeclared (first use in this function) /tmp/pear/temp/xattr/xattr.c: In function 'zif_xattr_list': /tmp/pear/temp/xattr/xattr.c:337:49: error: 'struct _php_core_globals' has no member named 'safe_mode' /tmp/pear/temp/xattr/xattr.c:337:92: error: 'CHECKUID_DISALLOW_FILE_NOT_EXISTS' undeclared (first use in this function) make: *** [xattr.lo] Error 1 ERROR: `make' failed There seem to be a few errors, but I can't make heads or tails of them. Does this just not work properly in 12.10? That would be a big problem for me.

  Read the article

• The Inkremental Architect&acute;s Napkin - #4 - Make increments tangible

  - by Ralf Westphal

  Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/06/12/the-inkremental-architectacutes-napkin---4---make-increments-tangible.aspxThe driver of software development are increments, small increments, tiny increments. With an increment being a slice of the overall requirement scope thin enough to implement and get feedback from a product owner within 2 days max. Such an increment might concern Functionality or Quality.[1] To make such high frequency delivery of increments possible, the transition from talking to coding needs to be as easy as possible. A user story or some other documentation of what´s supposed to get implemented until tomorrow evening at latest is one side of the medal. The other is where to put the logic in all of the code base. To implement an increment, only logic statements are needed. Functionality like Quality are just about expressions and control flow statements. Think of Assembler code without the CALL/RET instructions. That´s all is needed. Forget about functions, forget about classes. To make a user happy none of that is really needed. It´s just about the right expressions and conditional executions paths plus some memory allocation. Automatic function inlining of compilers which makes it clear how unimportant functions are for delivering value to users at runtime. But why then are there functions? Because they were invented for optimization purposes. We need them for better Evolvability and Production Efficiency. Nothing more, nothing less. No software has become faster, more secure, more scalable, more functional because we gathered logic under the roof of a function or two or a thousand. Functions make logic easier to understand. Functions make us faster in producing logic. Functions make it easier to keep logic consistent. Functions help to conserve memory. That said, functions are important. They are even the pivotal element of software development. We can´t code without them - whether you write a function yourself or not. Because there´s always at least one function in play: the Entry Point of a program. In Ruby the simplest program looks like this:puts "Hello, world!" In C# more is necessary:class Program { public static void Main () { System.Console.Write("Hello, world!"); } } C# makes the Entry Point function explicit, not so Ruby. But still it´s there. So you can think of logic always running in some function. Which brings me back to increments: In order to make the transition from talking to code as easy as possible, it has to be crystal clear into which function you should put the logic. Product owners might be content once there is a sticky note a user story on the Scrum or Kanban board. But developers need an idea of what that sticky note means in term of functions. Because with a function in hand, with a signature to run tests against, they have something to focus on. All´s well once there is a function behind whose signature logic can be piled up. Then testing frameworks can be used to check if the logic is correct. Then practices like TDD can help to drive the implementation. That´s why most code katas define exactly how the API of a solution should look like. It´s a function, maybe two or three, not more. A requirement like “Write a function f which takes this as parameters and produces such and such output by doing x” makes a developer comfortable. Yes, there are all kinds of details to think about, like which algorithm or technology to use, or what kind of state and side effects to consider. Even a single function not only must deliver on Functionality, but also on Quality and Evolvability. Nevertheless, once it´s clear which function to put logic in, you have a tangible starting point. So, yes, what I´m suggesting is to find a single function to put all the logic in that´s necessary to deliver on a the requirements of an increment. Or to put it the other way around: Slice requirements in a way that each increment´s logic can be located under the roof of a single function. Entry points Of course, the logic of a software will always be spread across many, many functions. But there´s always an Entry Point. That´s the most important function for each increment, because that´s the root to put integration or even acceptance tests on. A batch program like the above hello-world application only has a single Entry Point. All logic is reached from there, regardless how deep it´s nested in classes. But a program with a user interface like this has at least two Entry Points: One is the main function called upon startup. The other is the button click event handler for “Show my score”. But maybe there are even more, like another Entry Point being a handler for the event fired when one of the choices gets selected; because then some logic could check if the button should be enabled because all questions got answered. Or another Entry Point for the logic to be executed when the program is close; because then the choices made should be persisted. You see, an Entry Point to me is a function which gets triggered by the user of a software. With batch programs that´s the main function. With GUI programs on the desktop that´s event handlers. With web programs that´s handlers for URL routes. And my basic suggestion to help you with slicing requirements for Spinning is: Slice them in a way so that each increment is related to only one Entry Point function.[2] Entry Points are the “outer functions” of a program. That´s where the environment triggers behavior. That´s where hardware meets software. Entry points always get called because something happened to hardware state, e.g. a key was pressed, a mouse button clicked, the system timer ticked, data arrived over a wire.[3] Viewed from the outside, software is just a collection of Entry Point functions made accessible via buttons to press, menu items to click, gestures, URLs to open, keys to enter. Collections of batch processors I´d thus say, we haven´t moved forward since the early days of software development. We´re still writing batch programs. Forget about “event-driven programming” with its fancy GUI applications. Software is just a collection of batch processors. Earlier it was just one per program, today it´s hundreds we bundle up into applications. Each batch processor is represented by an Entry Point as its root that works on a number of resources from which it reads data to process and to which it writes results. These resources can be the keyboard or main memory or a hard disk or a communication line or a display. Together many batch processors - large and small - form applications the user perceives as a single whole: Software development that way becomes quite simple: just implement one batch processor after another. Well, at least in principle ;-) Features Each batch processor entered through an Entry Point delivers value to the user. It´s an increment. Sometimes its logic is trivial, sometimes it´s very complex. Regardless, each Entry Point represents an increment. An Entry Point implemented thus is a step forward in terms of Agility. At the same time it´s a tangible unit for developers. Therefore, identifying the more or less numerous batch processors in a software system is a rewarding task for product owners and developers alike. That´s where user stories meet code. In this example the user story translates to the Entry Point triggered by clicking the login button on a dialog like this: The batch then retrieves what has been entered via keyboard, loads data from a user store, and finally outputs some kind of response on the screen, e.g. by displaying an error message or showing the next dialog. This is all very simple, but you see, there is not just one thing happening, but several. Get input (email address, password) Load user for email address If user not found report error Check password Hash password Compare hash to hash stored in user Show next dialog Viewed from 10,000 feet it´s all done by the Entry Point function. And of course that´s technically possible. It´s just a bunch of logic and calling a couple of API functions. However, I suggest to take these steps as distinct aspects of the overall requirement described by the user story. Such aspects of requirements I call Features. Features too are increments. Each provides some (small) value of its own to the user. Each can be checked individually by a product owner. Instead of implementing all the logic behind the Login() entry point at once you can move forward increment by increment, e.g. First implement the dialog, let the user enter any credentials, and log him/her in without any checks. Features 1 and 4. Then hard code a single user and check the email address. Features 2 and 2.1. Then check password without hashing it (or use a very simple hash like the length of the password). Features 3. and 3.2 Replace hard coded user with a persistent user directoy, but a very simple one, e.g. a CSV file. Refinement of feature 2. Calculate the real hash for the password. Feature 3.1. Switch to the final user directory technology. Each feature provides an opportunity to deliver results in a short amount of time and get feedback. If you´re in doubt whether you can implement the whole entry point function until tomorrow night, then just go for a couple of features or even just one. That´s also why I think, you should strive for wrapping feature logic into a function of its own. It´s a matter of Evolvability and Production Efficiency. A function per feature makes the code more readable, since the language of requirements analysis and design is carried over into implementation. It makes it easier to apply changes to features because it´s clear where their logic is located. And finally, of course, it lets you re-use features in different context (read: increments). Feature functions make it easier for you to think of features as Spinning increments, to implement them independently, to let the product owner check them for acceptance individually. Increments consist of features, entry point functions consist of feature functions. So you can view software as a hierarchy of requirements from broad to thin which map to a hierarchy of functions - with entry points at the top.   I like this image of software as a self-similar structure on many levels of abstraction where requirements and code match each other. That to me is true agile design: the core tenet of Agility to move forward in increments is carried over into implementation. Increments on paper are retained in code. This way developers can easily relate to product owners. Elusive and fuzzy requirements are not tangible. Software production is moving forward through requirements one increment at a time, and one function at a time. In closing Product owners and developers are different - but they need to work together towards a shared goal: working software. So their notions of software need to be made compatible, they need to be connected. The increments of the product owner - user stories and features - need to be mapped straightforwardly to something which is relevant to developers. To me that´s functions. Yes, functions, not classes nor components nor micro services. We´re talking about behavior, actions, activities, processes. Their natural representation is a function. Something has to be done. Logic has to be executed. That´s the purpose of functions. Later, classes and other containers are needed to stay on top of a growing amount of logic. But to connect developers and product owners functions are the appropriate glue. Functions which represent increments. Can there always be such a small increment be found to deliver until tomorrow evening? I boldly say yes. Yes, it´s always possible. But maybe you´ve to start thinking differently. Maybe the product owner needs to start thinking differently. Completion is not the goal anymore. Neither is checking the delivery of an increment through the user interface of a software. Product owners need to become comfortable using test beds for certain features. If it´s hard to slice requirements thin enough for Spinning the reason is too little knowledge of something. Maybe you don´t yet understand the problem domain well enough? Maybe you don´t yet feel comfortable with some tool or technology? Then it´s time to acknowledge this fact. Be honest about your not knowing. And instead of trying to deliver as a craftsman officially become a researcher. Research an check back with the product owner every day - until your understanding has grown to a level where you are able to define the next Spinning increment. ? Sometimes even thin requirement slices will cover several Entry Points, like “Add validation of email addresses to all relevant dialogs.” Validation then will it put into a dozen functons. Still, though, it´s important to determine which Entry Points exactly get affected. That´s much easier, if strive for keeping the number of Entry Points per increment to 1. ? If you like call Entry Point functions event handlers, because that´s what they are. They all handle events of some kind, whether that´s palpable in your code or note. A public void btnSave_Click(object sender, EventArgs e) {…} might look like an event handler to you, but public static void Main() {…} is one also - for then event “program started”. ?

  Read the article

• Oracle Data Integrator 11.1.1.5 Complex Files as Sources and Targets

  - by Alex Kotopoulis

  Overview ODI 11.1.1.5 adds the new Complex File technology for use with file sources and targets. The goal is to read or write file structures that are too complex to be parsed using the existing ODI File technology. This includes: Different record types in one list that use different parsing rules Hierarchical lists, for example customers with nested orders Parsing instructions in the file data, such as delimiter types, field lengths, type identifiers Complex headers such as multiple header lines or parseable information in header Skipping of lines  Conditional or choice fields Similar to the ODI File and XML File technologies, the complex file parsing is done through a JDBC driver that exposes the flat file as relational table structures. Complex files are mapped to one or more table structures, as opposed to the (simple) file technology, which always has a one-to-one relationship between file and table. The resulting set of tables follows the same concept as the ODI XML driver, table rows have additional PK-FK relationships to express hierarchy as well as order values to maintain the file order in the resulting table.   The parsing instruction format used for complex files is the nXSD (native XSD) format that is already in use with Oracle BPEL. This format extends the XML Schema standard by adding additional parsing instructions to each element. Using nXSD parsing technology, the native file is converted into an internal XML format. It is important to understand that the XML is streamed to improve performance; there is no size limitation of the native file based on memory size, the XML data is never fully materialized.  The internal XML is then converted to relational schema using the same mapping rules as the ODI XML driver. How to Create an nXSD file Complex file models depend on the nXSD schema for the given file. This nXSD file has to be created using a text editor or the Native Format Builder Wizard that is part of Oracle BPEL. BPEL is included in the ODI Suite, but not in standalone ODI Enterprise Edition. The nXSD format extends the standard XSD format through nxsd attributes. NXSD is a valid XML Schema, since the XSD standard allows extra attributes with their own namespaces. The following is a sample NXSD schema: <?xml version="1.0"?> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd" elementFormDefault="qualified" xmlns:tns="http://xmlns.oracle.com/pcbpel/demoSchema/csv" targetNamespace="http://xmlns.oracle.com/pcbpel/demoSchema/csv" attributeFormDefault="unqualified" nxsd:encoding="US-ASCII" nxsd:stream="chars" nxsd:version="NXSD"> <xsd:element name="Root">         <xsd:complexType><xsd:sequence>       <xsd:element name="Header">                 <xsd:complexType><xsd:sequence>                         <xsd:element name="Branch" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy=","/>                         <xsd:element name="ListDate" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}"/>                         </xsd:sequence></xsd:complexType>                         </xsd:element>                 </xsd:sequence></xsd:complexType>         <xsd:element name="Customer" maxOccurs="unbounded">                 <xsd:complexType><xsd:sequence>                 <xsd:element name="Name" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy=","/>                         <xsd:element name="Street" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />                         <xsd:element name="City" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" />                         </xsd:sequence></xsd:complexType>                         </xsd:element>                 </xsd:sequence></xsd:complexType> </xsd:element> </xsd:schema> The nXSD schema annotates elements to describe their position and delimiters within the flat text file. The schema above uses almost exclusively the nxsd:terminatedBy instruction to look for the next terminator chars. There are various constructs in nXSD to parse fixed length fields, look ahead in the document for string occurences, perform conditional logic, use variables to remember state, and many more. nXSD files can either be written manually using an XML Schema Editor or created using the Native Format Builder Wizard. Both Native Format Builder Wizard as well as the nXSD language are described in the Application Server Adapter Users Guide. The way to start the Native Format Builder in BPEL is to create a new File Adapter; in step 8 of the Adapter Configuration Wizard a new Schema for Native Format can be created:   The Native Format Builder guides through a number of steps to generate the nXSD based on a sample native file. If the format is complex, it is often a good idea to “approximate” it with a similar simple format and then add the complex components manually.  The resulting *.xsd file can be copied and used as the format for ODI, other BPEL constructs such as the file adapter definition are not relevant for ODI. Using this technique it is also possible to parse the same file format in SOA Suite and ODI, for example using SOA for small real-time messages, and ODI for large batches. This nXSD schema in this example describes a file with a header row containing data and 3 string fields per row delimited by commas, for example: Redwood City Downtown Branch, 06/01/2011 Ebeneezer Scrooge, Sandy Lane, Atherton Tiny Tim, Winton Terrace, Menlo Park The ODI Complex File JDBC driver exposes the file structure through a set of relational tables with PK-FK relationships. The tables for this example are: Table ROOT (1 row): ROOTPK Primary Key for root element SNPSFILENAME Name of the file SNPSFILEPATH Path of the file SNPSLOADDATE Date of load Table HEADER (1 row): ROOTFK Foreign Key to ROOT record ROWORDER Order of row in native document BRANCH Data BRANCHORDER Order of Branch within row LISTDATE Data LISTDATEORDER Order of ListDate within row Table ADDRESS (2 rows): ROOTFK Foreign Key to ROOT record ROWORDER Order of row in native document NAME Data NAMEORDER Oder of Name within row STREET Data STREETORDER Order of Street within row CITY Data CITYORDER Order of City within row Every table has PK and/or FK fields to reflect the document hierarchy through relationships. In this example this is trivial since the HEADER and all CUSTOMER records point back to the PK of ROOT. Deeper nested documents require this to identify parent elements. All tables also have a ROWORDER field to define the order of rows, as well as order fields for each column, in case the order of columns varies in the original document and needs to be maintained. If order is not relevant, these fields can be ignored. How to Create an Complex File Data Server in ODI After creating the nXSD file and a test data file, and storing it on the local file system accessible to ODI, you can go to the ODI Topology Navigator to create a Data Server and Physical Schema under the Complex File technology. This technology follows the conventions of other ODI technologies and is very similar to the XML technology. The parsing settings such as the source native file, the nXSD schema file, the root element, as well as the external database can be set in the JDBC URL: The use of an external database defined by dbprops is optional, but is strongly recommended for production use. Ideally, the staging database should be used for this. Also, when using a complex file exclusively for read purposes, it is recommended to use the ro=true property to ensure the file is not unnecessarily synchronized back from the database when the connection is closed. A data file is always required to be present  at the filename path during design-time. Without this file, operations like testing the connection, reading the model data, or reverse engineering the model will fail.  All properties of the Complex File JDBC Driver are documented in the Oracle Fusion Middleware Connectivity and Knowledge Modules Guide for Oracle Data Integrator in Appendix C: Oracle Data Integrator Driver for Complex Files Reference. David Allan has created a great viewlet Complex File Processing - 0 to 60 which shows the creation of a Complex File data server as well as a model based on this server. How to Create Models based on an Complex File Schema Once physical schema and logical schema have been created, the Complex File can be used to create a Model as if it were based on a database. When reverse-engineering the Model, data stores(tables) for each XSD element of complex type will be created. Use of complex files as sources is straightforward; when using them as targets it has to be made sure that all dependent tables have matching PK-FK pairs; the same applies to the XML driver as well. Debugging and Error Handling There are different ways to test an nXSD file. The Native Format Builder Wizard can be used even if the nXSD wasn’t created in it; it will show issues related to the schema and/or test data. In ODI, the nXSD  will be parsed and run against the existing test XML file when testing a connection in the Dataserver. If either the nXSD has an error or the data is non-compliant to the schema, an error will be displayed. Sample error message: Error while reading native data. [Line=1, Col=5] Not enough data available in the input, when trying to read data of length "19" for "element with name D1" from the specified position, using "style" as "fixedLength" and "length" as "". Ensure that there is enough data from the specified position in the input. Complex File FAQ Is the size of the native file limited by available memory? No, since the native data is streamed through the driver, only the available space in the staging database limits the size of the data. There are limits on individual field sizes, though; a single large object field needs to fit in memory. Should I always use the complex file driver instead of the file driver in ODI now? No, use the file technology for all simple file parsing tasks, for example any fixed-length or delimited files that just have one row format and can be mapped into a simple table. Because of its narrow assumptions the ODI file driver is easy to configure within ODI and can stream file data without writing it into a database. The complex file driver should be used whenever the use case cannot be handled through the file driver. Are we generating XML out of flat files before we write it into a database? We don’t materialize any XML as part of parsing a flat file, either in memory or on disk. The data produced by the XML parser is streamed in Java objects that just use XSD-derived nXSD schema as its type system. We use the nXSD schema because is the standard for describing complex flat file metadata in Oracle Fusion Middleware, and enables users to share schemas across products. Is the nXSD file interchangeable with SOA Suite? Yes, ODI can use the same nXSD files as SOA Suite, allowing mixed use cases with the same data format. Can I start the Native Format Builder from the ODI Studio? No, the Native Format Builder has to be started from a JDeveloper with BPEL instance. You can get BPEL as part of the SOA Suite bundle. Users without SOA Suite can manually develop nXSD files using XSD editors. When is the database data written back to the native file? Data is synchronized using the SYNCHRONIZE and CREATE FILE commands, and when the JDBC connection is closed. It is recommended to set the ro or read_only property to true when a file is exclusively used for reading so that no unnecessary write-backs occur. Is the nXSD metadata part of the ODI Master or Work Repository? No, the data server definition in the master repository only contains the JDBC URL with file paths; the nXSD files have to be accessible on the file systems where the JDBC driver is executed during production, either by copying or by using a network file system. Where can I find sample nXSD files? The Application Server Adapter Users Guide contains nXSD samples for various different use cases.

  Read the article

• R Package Installation with Oracle R Enterprise

  - by Sherry LaMonica-Oracle

  Normal 0 false false false EN-US X-NONE X-NONE Programming languages give developers the opportunity to write reusable functions and to bundle those functions into logical deployable entities. In R, these are called packages. R has thousands of such packages provided by an almost equally large group of third-party contributors. To allow others to benefit from these packages, users can share packages on the CRAN system for use by the vast R development community worldwide. R's package system along with the CRAN framework provides a process for authoring, documenting and distributing packages to millions of users. In this post, we'll illustrate the various ways in which such R packages can be installed for use with R and together with Oracle R Enterprise. In the following, the same instructions apply when using either open source R or Oracle R Distribution. In this post, we cover the following package installation scenarios for: R command line Linux shell command line Use with Oracle R Enterprise Installation on Exadata or RAC Installing all packages in a CRAN Task View Troubleshooting common errors 1. R Package Installation BasicsR package installation basics are outlined in Chapter 6 of the R Installation and Administration Guide. There are two ways to install packages from the command line: from the R command line and from the shell command line. For this first example on Oracle Linux using Oracle R Distribution, we’ll install the arules package as root so that packages will be installed in the default R system-wide location where all users can access it, /usr/lib64/R/library.Within R, using the install.packages function always attempts to install the latest version of the requested package available on CRAN:R> install.packages("arules")If the arules package depends upon other packages that are not already installed locally, the R installer automatically downloads and installs those required packages. This is a huge benefit that frees users from the task of identifying and resolving those dependencies.You can also install R from the shell command line. This is useful for some packages when an internet connection is not available or for installing packages not uploaded to CRAN. To install packages this way, first locate the package on CRAN and then download the package source to your local machine. For example:$ wget http://cran.r-project.org/src/contrib/arules_1.1-2.tar.gz Then, install the package using the command R CMD INSTALL:$ R CMD INSTALL arules_1.1-2.tar.gzA major difference between installing R packages using the R package installer at the R command line and shell command line is that package dependencies must be resolved manually at the shell command line. Package dependencies are listed in the Depends section of the package’s CRAN site. If dependencies are not identified and installed prior to the package’s installation, you will see an error similar to:ERROR: dependency ‘xxx’ is not available for package ‘yyy’As a best practice and to save time, always refer to the package’s CRAN site to understand the package dependencies prior to attempting an installation. If you don’t run R as root, you won’t have permission to write packages into the default system-wide location and you will be prompted to create a personal library accessible by your userid. You can accept the personal library path chosen by R, or specify the library location by passing parameters to the install.packages function. For example, to create an R package repository in your home directory: R> install.packages("arules", lib="/home/username/Rpackages")or$ R CMD INSTALL arules_1.1-2.tar.gz --library=/home/username/RpackagesRefer to the install.packages help file in R or execute R CMD INSTALL --help at the shell command line for a full list of command line options.To set the library location and avoid having to specify this at every package install, simply create the R startup environment file .Renviron in your home area if it does not already exist, and add the following piece of code to it:R_LIBS_USER = "/home/username/Rpackages" 2. Setting the RepositoryEach time you install an R package from the R command line, you are asked which CRAN mirror, or server, R should use. To set the repository and avoid having to specify this during every package installation, create the R startup command file .Rprofile in your home directory and add the following R code to it:cat("Setting Seattle repository")r = getOption("repos") r["CRAN"] = "http://cran.fhcrc.org/"options(repos = r)rm(r) This code snippet sets the R package repository to the Seattle CRAN mirror at the start of each R session. 3. Installing R Packages for use with Oracle R EnterpriseEmbedded R execution with Oracle R Enterprise allows the use of CRAN or other third-party R packages in user-defined R functions executed on the Oracle Database server. The steps for installing and configuring packages for use with Oracle R Enterprise are the same as for open source R. The database-side R engine just needs to know where to find the R packages.The Oracle R Enterprise installation is performed by user oracle, which typically does not have write permission to the default site-wide library, /usr/lib64/R/library. On Linux and UNIX platforms, the Oracle R Enterprise Server installation provides the ORE script, which is executed from the operating system shell to install R packages and to start R. The ORE script is a wrapper for the default R script, a shell wrapper for the R executable. It can be used to start R, run batch scripts, and build or install R packages. Unlike the default R script, the ORE script installs packages to a location writable by user oracle and accessible by all ORE users - $ORACLE_HOME/R/library.To install a package on the database server so that it can be used by any R user and for use in embedded R execution, an Oracle DBA would typically download the package source from CRAN using wget. If the package depends on any packages that are not in the R distribution in use, download the sources for those packages, also.  For a single Oracle Database instance, replace the R script with ORE to install the packages in the same location as the Oracle R Enterprise packages. $ wget http://cran.r-project.org/src/contrib/arules_1.1-2.tar.gz$ ORE CMD INSTALL arules_1.1-2.tar.gzBehind the scenes, the ORE script performs the equivalent of setting R_LIBS_USER to the value of $ORACLE_HOME/R/library, and all R packages installed with the ORE script are installed to this location. For installing a package on multiple database servers, such as those in an Oracle Real Application Clusters (Oracle RAC) or a multinode Oracle Exadata Database Machine environment, use the ORE script in conjunction with the Exadata Distributed Command Line Interface (DCLI) utility.$ dcli -g nodes -l oracle ORE CMD INSTALL arules_1.1-1.tar.gz The DCLI -g flag designates a file containing a list of nodes to install on, and the -l flag specifies the user id to use when executing the commands. For more information on using DCLI with Oracle R Enterprise, see Chapter 5 in the Oracle R Enterprise Installation Guide.If you are using an Oracle R Enterprise client, install the package the same as any R package, bearing in mind that you must install the same version of the package on both the client and server machines to avoid incompatibilities. 4. CRAN Task ViewsCRAN also maintains a set of Task Views that identify packages associated with a particular task or methodology. Task Views are helpful in guiding users through the huge set of available R packages. They are actively maintained by volunteers who include detailed annotations for routines and packages. If you find one of the task views is a perfect match, you can install every package in that view using the ctv package - an R package for automating package installation. To use the ctv package to install a task view, first, install and load the ctv package.R> install.packages("ctv")R> library(ctv)Then query the names of the available task views and install the view you choose.R> available.views() R> install.views("TimeSeries") 5. Using and Managing R packages To use a package, start up R and load packages one at a time with the library command.Load the arules package in your R session. R> library(arules)Verify the version of arules installed.R> packageVersion("arules")[1] '1.1.2'Verify the version of arules installed on the database server using embedded R execution.R> ore.doEval(function() packageVersion("arules"))View the help file for the apropos function in the arules packageR> ?aproposOver time, your package repository will contain more and more packages, especially if you are using the system-wide repository where others are adding additional packages. It’s good to know the entire set of R packages accessible in your environment. To list all available packages in your local R session, use the installed.packages command:R> myLocalPackages <- row.names(installed.packages())R> myLocalPackagesTo access the list of available packages on the ORE database server from the ORE client, use the following embedded R syntax: R> myServerPackages <- ore.doEval(function() row.names(installed.packages()) R> myServerPackages 6. Troubleshooting Common ProblemsInstalling Older Versions of R packagesIf you immediately upgrade to the latest version of R, you will have no problem installing the most recent versions of R packages. However, if your version of R is older, some of the more recent package releases will not work and install.packages will generate a message such as: Warning message: In install.packages("arules") : package ‘arules’ is not availableThis is when you have to go to the Old sources link on the CRAN page for the arules package and determine which version is compatible with your version of R.Begin by determining what version of R you are using:$ R --versionOracle Distribution of R version 3.0.1 (--) -- "Good Sport" Copyright (C) The R Foundation for Statistical Computing Platform: x86_64-unknown-linux-gnu (64-bit)Given that R-3.0.1 was released May 16, 2013, any version of the arules package released after this date may work. Scanning the arules archive, we might try installing version 0.1.1-1, released in January of 2014:$ wget http://cran.r-project.org/src/contrib/Archive/arules/arules_1.1-1.tar.gz$ R CMD INSTALL arules_1.1-1.tar.gzFor use with ORE:$ ORE CMD INSTALL arules_1.1-1.tar.gzThe "package not available" error can also be thrown if the package you’re trying to install lives elsewhere, either another R package site, or it’s been removed from CRAN. A quick Google search usually leads to more information on the package’s location and status.Oracle R Enterprise is not in the R library pathOn Linux hosts, after installing the ORE server components, starting R, and attempting to load the ORE packages, you may receive the error:R> library(ORE)Error in library(ORE) : there is no package called ‘ORE’If you know the ORE packages have been installed and you receive this error, this is the result of not starting R with the ORE script. To resolve this problem, exit R and restart using the ORE script. After restarting R and ">running the command to load the ORE packages, you should not receive any errors.$ ORER> library(ORE)On Windows servers, the solution is to make the location of the ORE packages visible to R by adding them to the R library paths. To accomplish this, exit R, then add the following lines to the .Rprofile file. On Windows, the .Rprofile file is located in R\etc directory C:\Program Files\R\R-<version>\etc. Add the following lines:.libPaths("<path to $ORACLE_HOME>/R/library")The above line will tell R to include the R directory in the Oracle home as part of its search path. When you start R, the path above will be included, and future R package installations will also be saved to $ORACLE_HOME/R/library. This path should be writable by the user oracle, or the userid for the DBA tasked with installing R packages.Binary package compiled with different version of RBy default, R will install pre-compiled versions of packages if they are found. If the version of R under which the package was compiled does not match your installed version of R you will get an error message:Warning message: package ‘xxx’ was built under R version 3.0.0The solution is to download the package source and build it for your version of R.$ wget http://cran.r-project.org/src/contrib/Archive/arules/arules_1.1-1.tar.gz$ R CMD INSTALL arules_1.1-1.tar.gzFor use with ORE:$ ORE CMD INSTALL arules_1.1-1.tar.gzUnable to execute files in /tmp directoryBy default, R uses the /tmp directory to install packages. On security conscious machines, the /tmp directory is often marked as "noexec" in the /etc/fstab file. This means that no file under /tmp can ever be executed, and users who attempt to install R package will receive an error:ERROR: 'configure' exists but is not executable -- see the 'R Installation and Administration Manual’The solution is to set the TMP and TMPDIR environment variables to a location which R will use as the compilation directory. For example:$ mkdir <some path>/tmp$ export TMPDIR= <some path>/tmp$ export TMP= <some path>/tmpThis error typically appears on Linux client machines and not database servers, as Oracle Database writes to the value of the TMP environment variable for several tasks, including holding temporary files during database installation. 7. Creating your own R packageCreating your own package and submitting to CRAN is for advanced users, but it is not difficult. The procedure to follow, along with details of R's package system, is detailed in the Writing R Extensions manual.

  Read the article

• DevConnections Session Slides, Samples and Links

  - by Rick Strahl

  Finally coming up for air this week, after catching up with being on the road for the better part of three weeks. Here are my slides, samples and links for my four DevConnections Session two weeks ago in Vegas. I ended up doing one extra un-prepared for session on WebAPI and AJAX, as some of the speakers were either delayed or unable to make it at all to Vegas due to Sandy's mayhem. It was pretty hectic in the speaker room as Erik (our event coordinator extrodinaire) was scrambling to fill session slots with speakers :-). Surprisingly it didn't feel like the storm affected attendance drastically though, but I guess it's hard to tell without actual numbers. The conference was a lot of fun - it's been a while since I've been speaking at one of these larger conferences. I'd been taking a hiatus, and I forgot how much I enjoy actually giving talks. Preparing - well not  quite so much, especially since I ended up essentially preparing or completely rewriting for all three of these talks and I was stressing out a bit as I was sick the week before the conference and didn't get as much time to prepare as I wanted to. But - as always seems to be the case - it all worked out, but I guess those that attended have to be the judge of that… It was great to catch up with my speaker friends as well - man I feel out of touch. I got to spend a bunch of time with Dan Wahlin, Ward Bell, Julie Lerman and for about 10 minutes even got to catch up with the ever so busy Michele Bustamante. Lots of great technical discussions including a fun and heated REST controversy with Ward and Howard Dierking. There were also a number of great discussions with attendees, describing how they're using the technologies touched in my talks in live applications. I got some great ideas from some of these and I wish there would have been more opportunities for these kinds of discussions. One thing I miss at these Vegas events though is some sort of coherent event where attendees and speakers get to mingle. These Vegas conferences are just like "go to sessions, then go out and PARTY on the town" - it's Vegas after all! But I think that it's always nice to have at least one evening event where everybody gets to hang out together and trade stories and geek talk. Overall there didn't seem to be much opportunity for that beyond lunch or the small and short exhibit hall events which it seemed not many people actually went to. Anyways, a good time was had. I hope those of you that came to my sessions learned something useful. There were lots of great questions and discussions after the sessions - always appreciate hearing the real life scenarios that people deal with in relation to the abstracted scenarios in sessions. Here are the Session abstracts, a few comments and the links for downloading slides and  samples. It's not quite like being there, but I hope this stuff turns out to be useful to some of you. I'll be following up a couple of these sessions with white papers in the following weeks. Enjoy. ASP.NET Architecture: How ASP.NET Works at the Low Level Abstract:Interested in how ASP.NET works at a low level? ASP.NET is extremely powerful and flexible technology, but it's easy to forget about the core framework that underlies the higher level technologies like ASP.NET MVC, WebForms, WebPages, Web Services that we deal with on a day to day basis. The ASP.NET core drives all the higher level handlers and frameworks layered on top of it and with the core power comes some complexity in the form of a very rich object model that controls the flow of a request through the ASP.NET pipeline from Windows HTTP services down to the application level. To take full advantage of it, it helps to understand the underlying architecture and model. This session discusses the architecture of ASP.NET along with a number of useful tidbits that you can use for building and debugging your ASP.NET applications more efficiently. We look at overall architecture, how requests flow from the IIS (7 and later) Web Server to the ASP.NET runtime into HTTP handlers, modules and filters and finally into high-level handlers like MVC, Web Forms or Web API. Focus of this session is on the low-level aspects on the ASP.NET runtime, with examples that demonstrate the bootstrapping of ASP.NET, threading models, how Application Domains are used, startup bootstrapping, how configuration files are applied and how all of this relates to the applications you write either using low-level tools like HTTP handlers and modules or high-level pages or services sitting at the top of the ASP.NET runtime processing chain. Comments:I was surprised to see so many people show up for this session - especially since it was the last session on the last day and a short 1 hour session to boot. The room was packed and it was to see so many people interested the abstracts of architecture of ASP.NET beyond the immediate high level application needs. Lots of great questions in this talk as well - I only wish this session would have been the full hour 15 minutes as we just a little short of getting through the main material (didn't make it to Filters and Error handling). I haven't done this session in a long time and I had to pretty much re-figure all the system internals having to do with the ASP.NET bootstrapping in light for the changes that came with IIS 7 and later. The last time I did this talk was with IIS6, I guess it's been a while. I love doing this session, mainly because in my mind the core of ASP.NET overall is so cleanly designed to provide maximum flexibility without compromising performance that has clearly stood the test of time in the 10 years or so that .NET has been around. While there are a lot of moving parts, the technology is easy to manage once you understand the core components and the core model hasn't changed much even while the underlying architecture that drives has been almost completely revamped especially with the introduction of IIS 7 and later. Download Samples and Slides   Introduction to using jQuery with ASP.NET Abstract:In this session you'll learn how to take advantage of jQuery in your ASP.NET applications. Starting with an overview of jQuery client features via many short and fun examples, you'll find out about core features like the power of selectors for document element selection, manipulating these elements with jQuery's wrapped set methods in a browser independent way, how to hook up and handle events easily and generally apply concepts of unobtrusive JavaScript principles to client scripting. The second half of the session then delves into jQuery's AJAX features and several different ways how you can interact with ASP.NET on the server. You'll see examples of using ASP.NET MVC for serving HTML and JSON AJAX content, as well as using the new ASP.NET Web API to serve JSON and hypermedia content. You'll also see examples of client side templating/databinding with Handlebars and Knockout. Comments:This session was in a monster of a room and to my surprise it was nearly packed, given that this was a 100 level session. I can see that it's a good idea to continue to do intro sessions to jQuery as there appeared to be quite a number of folks who had not worked much with jQuery yet and who most likely could greatly benefit from using it. Seemed seemed to me the session got more than a few people excited to going if they hadn't yet :-).  Anyway I just love doing this session because it's mostly live coding and highly interactive - not many sessions that I can build things up from scratch and iterate on in an hour. jQuery makes that easy though. Resources: Slides and Code Samples Introduction to jQuery White Paper Introduction to ASP.NET Web API   Hosting the Razor Scripting Engine in Your Own Applications Abstract:The Razor Engine used in ASP.NET MVC and ASP.NET Web Pages is a free-standing scripting engine that can be disassociated from these Web-specific implementations and can be used in your own applications. Razor allows for a powerful mix of code and text rendering that makes it a wonderful tool for any sort of text generation, from creating HTML output in non-Web applications, to rendering mail merge-like functionality, to code generation for developer tools and even as a plug-in scripting engine. In this session, we'll look at the components that make up the Razor engine and how you can bootstrap it in your own applications to hook up templating. You'll find out how to create custom templates and manage Razor requests that can be pre-compiled, detecting page changes and act in ways similar to a full runtime. We look at ways that you can pass data into the engine and retrieve both the rendered output as well as result values in a package that makes it easy to plug Razor into your own applications. Comments:That this session was picked was a bit of a surprise to me, since it's a bit of a niche topic. Even more of a surprise was that during the session quite a few people who attended had actually used Razor externally and were there to find out more about how the process works and how to extend it. In the session I talk a bit about a custom Razor hosting implementation (Westwind.RazorHosting) and drilled into the various components required to build a custom Razor Hosting engine and a runtime around it. This sessions was a bit of a chore to prepare for as there are lots of technical implementation details that needed to be dealt with and squeezing that into an hour 15 is a bit tight (and that aren't addressed even by some of the wrapper libraries that exist). Found out though that there's quite a bit of interest in using a templating engine outside of web applications, or often side by side with the HTML output generated by frameworks like MVC or WebForms. An extra fun part of this session was that this was my first session and when I went to set up I realized I forgot my mini-DVI to VGA adapter cable to plug into the projector in my room - 6 minutes before the session was about to start. So I ended up sprinting the half a mile + back to my room - and back at a full sprint. I managed to be back only a couple of minutes late, but when I started I was out of breath for the first 10 minutes or so, while trying to talk. Musta sounded a bit funny as I was trying to not gasp too much :-) Resources: Slides and Code Samples Westwind.RazorHosting GitHub Project Original RazorHosting Blog Post   Introduction to ASP.NET Web API for AJAX Applications Abstract:WebAPI provides a new framework for creating REST based APIs, but it can also act as a backend to typical AJAX operations. This session covers the core features of Web API as it relates to typical AJAX application development. We’ll cover content-negotiation, routing and a variety of output generation options as well as managing data updates from the client in the context of a small Single Page Application style Web app. Finally we’ll look at some of the extensibility features in WebAPI to customize and extend Web API in a number and useful useful ways. Comments:This session was a fill in for session slots not filled due MIA speakers stranded by Sandy. I had samples from my previous Web API article so decided to go ahead and put together a session from it. Given that I spent only a couple of hours preparing and putting slides together I was glad it turned out as it did - kind of just ran itself by way of the examples I guess as well as nice audience interactions and questions. Lots of interest - and also some confusion about when Web API makes sense. Both this session and the jQuery session ended up getting a ton of questions about when to use Web API vs. MVC, whether it would make sense to switch to Web API for all AJAX backend work etc. In my opinion there's no need to jump to Web API for existing applications that already have a good AJAX foundation. Web API is awesome for real externally consumed APIs and clearly defined application AJAX APIs. For typical application level AJAX calls, it's still a good idea, but ASP.NET MVC can serve most if not all of that functionality just as well. There's no need to abandon MVC (or even ASP.NET AJAX or third party AJAX backends) just to move to Web API. For new projects Web API probably makes good sense for isolation of AJAX calls, but it really depends on how the application is set up. In some cases sharing business logic between the HTML and AJAX interfaces with a single MVC API can be cleaner than creating two completely separate code paths to serve essentially the same business logic. Resources: Slides and Code Samples Sample Code on GitHub Introduction to ASP.NET Web API White Paper© Rick Strahl, West Wind Technologies, 2005-2012Posted in Conferences  ASP.NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• ASPNET WebAPI REST Guidance

  - by JoshReuben

  ASP.NET Web API is an ideal platform for building RESTful applications on the .NET Framework. While I may be more partial to NodeJS these days, there is no denying that WebAPI is a well engineered framework. What follows is my investigation of how to leverage WebAPI to construct a RESTful frontend API.   The Advantages of REST Methodology over SOAP Simpler API for CRUD ops Standardize Development methodology - consistent and intuitive Standards based à client interop Wide industry adoption, Ease of use à easy to add new devs Avoid service method signature blowout Smaller payloads than SOAP Stateless à no session data means multi-tenant scalability Cache-ability Testability   General RESTful API Design Overview · utilize HTTP Protocol - Usage of HTTP methods for CRUD, standard HTTP response codes, common HTTP headers and Mime Types · Resources are mapped to URLs, actions are mapped to verbs and the rest goes in the headers. · keep the API semantic, resource-centric – A RESTful, resource-oriented service exposes a URI for every piece of data the client might want to operate on. A REST-RPC Hybrid exposes a URI for every operation the client might perform: one URI to fetch a piece of data, a different URI to delete that same data. utilize Uri to specify CRUD op, version, language, output format: http://api.MyApp.com/{ver}/{lang}/{resource_type}/{resource_id}.{output_format}?{key&filters} · entity CRUD operations are matched to HTTP methods: · Create - POST / PUT · Read – GET - cacheable · Update – PUT · Delete - DELETE · Use Uris to represent a hierarchies - Resources in RESTful URLs are often chained · Statelessness allows for idempotency – apply an op multiple times without changing the result. POST is non-idempotent, the rest are idempotent (if DELETE flags records instead of deleting them). · Cache indication - Leverage HTTP headers to label cacheable content and indicate the permitted duration of cache · PUT vs POST - The client uses PUT when it determines which URI (Id key) the new resource should have. The client uses POST when the server determines they key. PUT takes a second param – the id. POST creates a new resource. The server assigns the URI for the new object and returns this URI as part of the response message. Note: The PUT method replaces the entire entity. That is, the client is expected to send a complete representation of the updated product. If you want to support partial updates, the PATCH method is preferred DELETE deletes a resource at a specified URI – typically takes an id param · Leverage Common HTTP Response Codes in response headers 200 OK: Success 201 Created - Used on POST request when creating a new resource. 304 Not Modified: no new data to return. 400 Bad Request: Invalid Request. 401 Unauthorized: Authentication. 403 Forbidden: Authorization 404 Not Found – entity does not exist. 406 Not Acceptable – bad params. 409 Conflict - For POST / PUT requests if the resource already exists. 500 Internal Server Error 503 Service Unavailable · Leverage uncommon HTTP Verbs to reduce payload sizes HEAD - retrieves just the resource meta-information. OPTIONS returns the actions supported for the specified resource. PATCH - partial modification of a resource. · When using PUT, POST or PATCH, send the data as a document in the body of the request. Don't use query parameters to alter state. · Utilize Headers for content negotiation, caching, authorization, throttling o Content Negotiation – choose representation (e.g. JSON or XML and version), language & compression. Signal via RequestHeader.Accept & ResponseHeader.Content-Type Accept: application/json;version=1.0 Accept-Language: en-US Accept-Charset: UTF-8 Accept-Encoding: gzip o Caching - ResponseHeader: Expires (absolute expiry time) or Cache-Control (relative expiry time) o Authorization - basic HTTP authentication uses the RequestHeader.Authorization to specify a base64 encoded string "username:password". can be used in combination with SSL/TLS (HTTPS) and leverage OAuth2 3rd party token-claims authorization. Authorization: Basic sQJlaTp5ZWFslylnaNZ= o Rate Limiting - Not currently part of HTTP so specify non-standard headers prefixed with X- in the ResponseHeader. X-RateLimit-Limit: 10000 X-RateLimit-Remaining: 9990 · HATEOAS Methodology - Hypermedia As The Engine Of Application State – leverage API as a state machine where resources are states and the transitions between states are links between resources and are included in their representation (hypermedia) – get API metadata signatures from the response Link header - in a truly REST based architecture any URL, except the initial URL, can be changed, even to other servers, without worrying about the client. · error responses - Do not just send back a 200 OK with every response. Response should consist of HTTP error status code (JQuery has automated support for this), A human readable message , A Link to a meaningful state transition , & the original data payload that was problematic. · the URIs will typically map to a server-side controller and a method name specified by the type of request method. Stuff all your calls into just four methods is not as crazy as it sounds. · Scoping - Path variables look like you’re traversing a hierarchy, and query variables look like you’re passing arguments into an algorithm · Mapping URIs to Controllers - have one controller for each resource is not a rule – can consolidate - route requests to the appropriate controller and action method · Keep URls Consistent - Sometimes it’s tempting to just shorten our URIs. not recommend this as this can cause confusion · Join Naming – for m-m entity relations there may be multiple hierarchy traversal paths · Routing – useful level of indirection for versioning, server backend mocking in development ASPNET WebAPI Considerations ASPNET WebAPI implements a lot (but not all) RESTful API design considerations as part of its infrastructure and via its coding convention. Overview When developing an API there are basically three main steps: 1. Plan out your URIs 2. Setup return values and response codes for your URIs 3. Implement a framework for your API.   Design · Leverage Models MVC folder · Repositories – support IoC for tests, abstraction · Create DTO classes – a level of indirection decouples & allows swap out · Self links can be generated using the UrlHelper · Use IQueryable to support projections across the wire · Models can support restful navigation properties – ICollection<T> · async mechanism for long running ops - return a response with a ticket – the client can then poll or be pushed the final result later. · Design for testability - Test using HttpClient , JQuery ( $.getJSON , $.each) , fiddler, browser debug. Leverage IDependencyResolver – IoC wrapper for mocking · Easy debugging - IE F12 developer tools: Network tab, Request Headers tab     Routing · HTTP request method is matched to the method name. (This rule applies only to GET, POST, PUT, and DELETE requests.) · {id}, if present, is matched to a method parameter named id. · Query parameters are matched to parameter names when possible · Done in config via Routes.MapHttpRoute – similar to MVC routing · Can alternatively: o decorate controller action methods with HttpDelete, HttpGet, HttpHead,HttpOptions, HttpPatch, HttpPost, or HttpPut., + the ActionAttribute o use AcceptVerbsAttribute to support other HTTP verbs: e.g. PATCH, HEAD o use NonActionAttribute to prevent a method from getting invoked as an action · route table Uris can support placeholders (via curly braces{}) – these can support default values and constraints, and optional values · The framework selects the first route in the route table that matches the URI. Response customization · Response code: By default, the Web API framework sets the response status code to 200 (OK). But according to the HTTP/1.1 protocol, when a POST request results in the creation of a resource, the server should reply with status 201 (Created). Non Get methods should return HttpResponseMessage · Location: When the server creates a resource, it should include the URI of the new resource in the Location header of the response. public HttpResponseMessage PostProduct(Product item) {     item = repository.Add(item);     var response = Request.CreateResponse<Product>(HttpStatusCode.Created, item);     string uri = Url.Link("DefaultApi", new { id = item.Id });     response.Headers.Location = new Uri(uri);     return response; } Validation · Decorate Models / DTOs with System.ComponentModel.DataAnnotations properties RequiredAttribute, RangeAttribute. · Check payloads using ModelState.IsValid · Under posting – leave out values in JSON payload à JSON formatter assigns a default value. Use with RequiredAttribute · Over-posting - if model has RO properties à use DTO instead of model · Can hook into pipeline by deriving from ActionFilterAttribute & overriding OnActionExecuting Config · Done in App_Start folder > WebApiConfig.cs – static Register method: HttpConfiguration param: The HttpConfiguration object contains the following members. Member Description DependencyResolver Enables dependency injection for controllers. Filters Action filters – e.g. exception filters. Formatters Media-type formatters. by default contains JsonFormatter, XmlFormatter IncludeErrorDetailPolicy Specifies whether the server should include error details, such as exception messages and stack traces, in HTTP response messages. Initializer A function that performs final initialization of the HttpConfiguration. MessageHandlers HTTP message handlers - plug into pipeline ParameterBindingRules A collection of rules for binding parameters on controller actions. Properties A generic property bag. Routes The collection of routes. Services The collection of services. · Configure JsonFormatter for circular references to support links: PreserveReferencesHandling.Objects Documentation generation · create a help page for a web API, by using the ApiExplorer class. · The ApiExplorer class provides descriptive information about the APIs exposed by a web API as an ApiDescription collection · create the help page as an MVC view public ILookup<string, ApiDescription> GetApis()         {             return _explorer.ApiDescriptions.ToLookup(                 api => api.ActionDescriptor.ControllerDescriptor.ControllerName); · provide documentation for your APIs by implementing the IDocumentationProvider interface. Documentation strings can come from any source that you like – e.g. extract XML comments or define custom attributes to apply to the controller [ApiDoc("Gets a product by ID.")] [ApiParameterDoc("id", "The ID of the product.")] public HttpResponseMessage Get(int id) · GlobalConfiguration.Configuration.Services – add the documentation Provider · To hide an API from the ApiExplorer, add the ApiExplorerSettingsAttribute Plugging into the Message Handler pipeline · Plug into request / response pipeline – derive from DelegatingHandler and override theSendAsync method – e.g. for logging error codes, adding a custom response header · Can be applied globally or to a specific route Exception Handling · Throw HttpResponseException on method failures – specify HttpStatusCode enum value – examine this enum, as its values map well to typical op problems · Exception filters – derive from ExceptionFilterAttribute & override OnException. Apply on Controller or action methods, or add to global HttpConfiguration.Filters collection · HttpError object provides a consistent way to return error information in the HttpResponseException response body. · For model validation, you can pass the model state to CreateErrorResponse, to include the validation errors in the response public HttpResponseMessage PostProduct(Product item) {     if (!ModelState.IsValid)     {         return Request.CreateErrorResponse(HttpStatusCode.BadRequest, ModelState); Cookie Management · Cookie header in request and Set-Cookie headers in a response - Collection of CookieState objects · Specify Expiry, max-age resp.Headers.AddCookies(new CookieHeaderValue[] { cookie }); Internet Media Types, formatters and serialization · Defaults to application/json · Request Accept header and response Content-Type header · determines how Web API serializes and deserializes the HTTP message body. There is built-in support for XML, JSON, and form-urlencoded data · customizable formatters can be inserted into the pipeline · POCO serialization is opt out via JsonIgnoreAttribute, or use DataMemberAttribute for optin · JSON serializer leverages NewtonSoft Json.NET · loosely structured JSON objects are serialzed as JObject which derives from Dynamic · to handle circular references in json: json.SerializerSettings.PreserveReferencesHandling =    PreserveReferencesHandling.All à {"$ref":"1"}. · To preserve object references in XML [DataContract(IsReference=true)] · Content negotiation Accept: Which media types are acceptable for the response, such as “application/json,” “application/xml,” or a custom media type such as "application/vnd.example+xml" Accept-Charset: Which character sets are acceptable, such as UTF-8 or ISO 8859-1. Accept-Encoding: Which content encodings are acceptable, such as gzip. Accept-Language: The preferred natural language, such as “en-us”. o Web API uses the Accept and Accept-Charset headers. (At this time, there is no built-in support for Accept-Encoding or Accept-Language.) · Controller methods can take JSON representations of DTOs as params – auto-deserialization · Typical JQuery GET request: function find() {     var id = $('#prodId').val();     $.getJSON("api/products/" + id,         function (data) {             var str = data.Name + ': $' + data.Price;             $('#product').text(str);         })     .fail(         function (jqXHR, textStatus, err) {             $('#product').text('Error: ' + err);         }); }            · Typical GET response: HTTP/1.1 200 OK Server: ASP.NET Development Server/10.0.0.0 Date: Mon, 18 Jun 2012 04:30:33 GMT X-AspNet-Version: 4.0.30319 Cache-Control: no-cache Pragma: no-cache Expires: -1 Content-Type: application/json; charset=utf-8 Content-Length: 175 Connection: Close [{"Id":1,"Name":"TomatoSoup","Price":1.39,"ActualCost":0.99},{"Id":2,"Name":"Hammer", "Price":16.99,"ActualCost":10.00},{"Id":3,"Name":"Yo yo","Price":6.99,"ActualCost": 2.05}] True OData support · Leverage Query Options $filter, $orderby, $top and $skip to shape the results of controller actions annotated with the [Queryable]attribute. [Queryable]  public IQueryable<Supplier> GetSuppliers()  · Query: ~/Suppliers?$filter=Name eq ‘Microsoft’ · Applies the following selection filter on the server: GetSuppliers().Where(s => s.Name == “Microsoft”)  · Will pass the result to the formatter. · true support for the OData format is still limited - no support for creates, updates, deletes, $metadata and code generation etc · vnext: ability to configure how EditLinks, SelfLinks and Ids are generated Self Hosting no dependency on ASPNET or IIS: using (var server = new HttpSelfHostServer(config)) {     server.OpenAsync().Wait(); Tracing · tracability tools, metrics – e.g. send to nagios · use your choice of tracing/logging library, whether that is ETW,NLog, log4net, or simply System.Diagnostics.Trace. · To collect traces, implement the ITraceWriter interface public class SimpleTracer : ITraceWriter {     public void Trace(HttpRequestMessage request, string category, TraceLevel level,         Action<TraceRecord> traceAction)     {         TraceRecord rec = new TraceRecord(request, category, level);         traceAction(rec);         WriteTrace(rec); · register the service with config · programmatically trace – has helper extension methods: Configuration.Services.GetTraceWriter().Info( · Performance tracing - pipeline writes traces at the beginning and end of an operation - TraceRecord class includes aTimeStamp property, Kind property set to TraceKind.Begin / End Security · Roles class methods: RoleExists, AddUserToRole · WebSecurity class methods: UserExists, .CreateUserAndAccount · Request.IsAuthenticated · Leverage HTTP 401 (Unauthorized) response · [AuthorizeAttribute(Roles="Administrator")] – can be applied to Controller or its action methods · See section in WebApi document on "Claim-based-security for ASP.NET Web APIs using DotNetOpenAuth" – adapt this to STS.--> Web API Host exposes secured Web APIs which can only be accessed by presenting a valid token issued by the trusted issuer. http://zamd.net/2012/05/04/claim-based-security-for-asp-net-web-apis-using-dotnetopenauth/ · Use MVC membership provider infrastructure and add a DelegatingHandler child class to the WebAPI pipeline - http://stackoverflow.com/questions/11535075/asp-net-mvc-4-web-api-authentication-with-membership-provider - this will perform the login actions · Then use AuthorizeAttribute on controllers and methods for role mapping- http://sixgun.wordpress.com/2012/02/29/asp-net-web-api-basic-authentication/ · Alternate option here is to rely on MVC App : http://forums.asp.net/t/1831767.aspx/1

  Read the article

• CodePlex Daily Summary for Sunday, October 23, 2011

  CodePlex Daily Summary for Sunday, October 23, 2011Popular ReleasesView Layout Replicator for Microsoft Dynamics CRM 2011: View Layout Replicator (1.0.921.51): Added CodePlex and PayPal links New iconSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.0.921.340): Added CodePlex and PayPal links New iconRibbon Browser for Microsoft Dynamics CRM 2011: Ribbon Browser (1.0.922.41): Added CodePlex and PayPal links New iconMVCQuick: MVCQuick 0.3.1: Features??NHibernate 3.2??Repository（ORuM） ??Spring.Net 1.3.2??Container（IoC） ??Common.Logging 1.2??Logging ASP.NET Security Provider?? ??MVCQuick.Framework??MusicStoreElysium: Elysium Theme 1.1 (CTP 1): === Version history === Elysium Theme: Version 1.1 This is pre-release Community Technology Preview version. We recommended use it only for testing and studying project's possibilities. This version included: styles for: ContextMenu MenuItem (partially) bug fixes for: CommandButton: bug #598 ComboBox: bug #599 Window: bug #605 Elysium Theme: Version 1.0 This version included: classes: ThemeManager (with standart Windows Phone colors) CommandButton, RepeatCommandButton, ToggleC...DotNet.Framework.Common: DotNet.Framework.Common 4.0: ??????????，????????????XML Explorer: XML Explorer 4.0.5: Changes in 4.0.5: Added 'Copy Attribute XPath to Address Bar' feature. Added methods for decoding node text and value from Base64 encoded strings, and copying them to the clipboard. Added 'ChildNodeDefinitions' to the options, which allows for easier navigation of parent-child and ID-IDREF relationships. Discovery happens on-demand, as nodes are expanded and child nodes are added. Nodes can now have 'virtual' child nodes, defined by an xpath to select an identifier (usually relative to ...Media Companion: MC 3.419b Weekly: A couple of minor bug fixes, but the important fix in this release is to tackle the extremely long load times for users with large TV collections (issue #130). A note has been provided by developer Playos: "One final note, you will have to suffer one final long load and then it should be fixed... alternatively you can delete the TvCache.xml and rebuild your library... The fix was to include the file extension so it doesn't have to look for the video file (checking to see if a file exists is a...CODE Framework: 4.0.11021.0: This build adds a lot of our WPF components, including our MVVC and MVC components as well as a "Metro" and "Battleship" style.GridLibre para Visual FoxPro: GridLibre para Visual FoxPro v3.5: GridLibre Para Visual FoxPro: esta herramienta ayudara a los usuarios y programadores en los manejos de los datos, como Filtrar, multiseleccion y el autoformato a las columnas como la asignacion del controlsource.Self-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 0.9.9: Self-Tracking Entity Generator v 0.9.9 for Entity Framework 4.0Umbraco CMS: Umbraco 5.0 CMS Alpha 3: Umbraco 5 Alpha 3Umbraco 5 (aka Jupiter) will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out the Alpha of v5 today! If you're new to Umbraco and would like to get a low-down on our popular and easy-to-learn approach to content management, check out our intro video. What's Alpha 3?This is our third Alpha release. It's intended for developers looking to become familiar with the codebase & architecture, or for thos...Vkontakte WP: Vkontakte: source codeWay2Sms Applications for Android, Desktop/Laptop & Java enabled phones: Way2SMS Desktop App v2.0: 1. Fixed issue with sending messages due to changes to Way2Sms site 2. Updated the character limit to 160 from 140GART - Geo Augmented Reality Toolkit: 1.0.1: About Release 1.0.1 Release 1.0.1 is a service release that addresses several issues and improves performance. As always, check the Documentation tab for instructions on how to get started. If you don't have the Windows Phone SDK yet, grab it here. Breaking Change Please note: There is a breaking change in this release. As noted below, the WorldCalculationMode property of ARItem has been replaced by a user-definable function. ARItem is now automatically wired up with a function that perform...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.32: Fix for issue #16710 - string literals in "constant literal operations" which contain ASP.NET substitutions should not be considered "constant." Move the JS1284 error (Misplaced Function Declaration) so it only fires when in strict mode. I got a couple complaints that people didn't like that error popping up in their existing code when they could verify that the location of that function, although not strict JS, still functions as expected cross-browser.Naked Objects: Naked Objects Release 4.0.110.0: Corresponds to the packaged version 4.0.110.0 available via NuGet. Please note that the easiest way to install and run the Naked Objects Framework is via the NuGet package manager: just search the Official NuGet Package Source for 'nakedobjects'. It is only necessary to download the source code (from here) if you wish to modify or re-build the framework yourself. If you do wish to re-build the framework, consul the file HowToBuild.txt in the release. Documentation Please note that after ...myCollections: Version 1.5: New in this version : Added edit type for selected elements Added clean for selected elements Added Amazon Italia Added Amazon China Added TVDB Italia Added TVDB China Added Turkish language You can now manually add artist Added Order by Rating Improved Add by Media Improved Artist Detail Upgrade Sqlite engine View, Zoom, Grouping, Filter are now saved by category Added group by Artist Added CubeCover View BugFixingIronPython: 2.7.1 RC: This is the first release candidate of IronPython 2.7.1. Like IronPython 54498, this release requires .NET 4 or Silverlight 4. This release will replace any existing IronPython installation. If there are no showstopping issues, this will be the only release candidate for 2.7.1, so please speak up if you run into any roadblocks. The highlights of 2.7.1 are: Updated the standard library to match CPython 2.7.2. Add the ast, csv, and unicodedata modules. Fixed several bugs. IronPython To...Rawr: Rawr 4.2.6: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...New Projects"Cupa Timisului" evaluation app: The application is used for evaluating CABRILLO log file for "Cupa Timisului" HAM contest. You can use this code as a startup for ham contest log evaluating software... It's developed in C#.Afrihost Capped Account Monitoring Gadget: The Afrihost Monitoring Gadget is a Windows gadget to monitor the usage on your Afrihost capped account. This project is independently developed and not associated with Afrihost. It has been developed by an Afrihost client and not Afrihost themselves. Custom ORM for .NET: This project represents tiny "Custom ORM" system written in .NET (3.5 as of now). It has strongly typed mapping like in FluentNH. It allows you to change underlying data access logic on the fly. It is simple enough to grag-&-drop in your project and than change as you like.diagnostic medical system: Medical diagnostic system. Simple academic project using BiztTalk Bussines Rule Engine. DotNetNuke Kitchen Sink: A sample module project for DotNetNuke with a variety of different scenarios covered.ecBlog: ecBlog is a very simple blog application. Just run and use. Technology Choice I developed the site as expected with the MVC and HTML 5. Why MVC? In fact there is no one reason. I developed with one of the many features of MVC . MVC comes with a specific architecture, it also conFastPizza: This is a project to delivery stores, restaurants, and othersGB2312 for Silverlight: This class is for support GB2312 simplified Chinese characters for Silverlight(include Windows Phone 7) Application and inherited from Encoding abstract class. It's developed in CSharp. ?????? Silverlight（?? Windows Phone 7）?????? GB2312 ???????，? Encoding ?????。?? C# ????。Ginnay Distributed Downloader: Distributed Downloader using multiple proxiesIn for Consideration - EGR101 Rocket Launch Sequencer: In for Consideration's EGR101 RLS is an executable version of the simplified launch sequence presented in class materials of "Introduction to Engineering" at Embry-Riddle Aeronautical University in Daytona Beach, FL. Source code is available for those interested (C# only).luminji's core lib: luminji's core lib, provide the common utility of the c#.Muki erp System: MukiERP, features. MukiERP is a free, user-friendly, web-based ERP system. MukiERP is Open Source licensed on GPL. MukiERP is in active development and is constantly improved according to its users needs. MukiERP is written in .Net C# language. MukiERP is running well on a ASP.NET and MSSQL. NameDOB: This is for sharing a specific sample with a specific group.network utility: this is a project for working with network API.PGS: (functional) Program Generator from Spreadsheets: This project allows the generation of a functional program semantically equivalent to a given spreadsheet. Using this system, you can: - solve the calculation expressed by the user using a compiled approach. - use spreadsheets as a tool for programming by example.pkrss: c++ version:pkrss.sf.net csharp version:is here. pkrss.sf.net is c++ version desktop productor written by qt 4.7.3. pkrss.codeplex is csharp version web productor.SharePoint Log Browser: The SharePoint log browser is yet another way to view the log of SharePoint.SharpChip-8: Chip-8 Emulator written in C#SQL Server Stored Procedure best practices: This SQL Server stored procedure best practice guide contains documentations of best practices and helper tools to enhance further match with the best practices. sqlsearch: Hi, Googling gives me many search tools. But all tools are not efficient or not able to search into data. So I thought why developers on codeplex and I will not find out some solution for this same. All of you are invited to contribute in this project. Thank you, Hiren V.Suffix Tree in C# and F#: SuffixTree builds a suffix tree structure. A simple client shows how to find substrings in it, and the visual client shows the actual tree. Implemented in C# and F#.Test11: it is a test projectThe Seal: The Seal is a basic Open Source 2D Fantasy Based RPG(Role Playing Game) for Windows. More info coming soon.Toolpack: Updated and improves version silverlight toolkit and wpf toolkit.Unity Azure Setting Injector: Using Unity in Windows Azure made simple. Ever considered moving to Windows Azure, but didn't know how to inject setting from your Service Configuration file? Just reference this project and you will be able to inject Azure Storage Account Connection Strings & Local Storage Paths

  Read the article

• CodePlex Daily Summary for Sunday, January 23, 2011

  CodePlex Daily Summary for Sunday, January 23, 2011Popular ReleasesCommunity Forums NNTP bridge: Community Forums NNTP Bridge V42: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has added some features / bugfixes: Bugfix: Decoding of Subject now also supports multi-line subjects (occurs only if you have very long subjects with non-ASCII characters)Microsoft All-In-One Code Framework: All-In-One Code Framework 2011-01-23: Improved and Newly Added Examples:For an up-to-date code sample index, please refer to All-In-One Code Framework Sample Catalog. NEW Samples for Azure Name Description Owner CSAzureBingMaps Azure + Bing map sample application (C#) YiLun VBAzureBingMaps Azure + Bing map sample application (VB) Wenchao NEW Samples for ASP.NET Name Description Owner CSASPNETEmailAddressValidator Validate email address in ASP.NET (C#) Jerry VBASPNETEmailAddressValidator...Minecraft Tools: Minecraft Topographical Survey 1.3: MTS requires version 4 of the .NET Framework - you must download it from Microsoft if you have not previously installed it. This version of MTS adds automatic block list updates, so MTS will recognize blocks added in game updates properly rather than drawing them in bright pink. New in this version of MTS: Support for all new blocks added since the Halloween update Auto-update of blockcolors.xml to support future game updates A splash screen that shows while the program searches for upd...StyleCop for ReSharper: StyleCop for ReSharper 5.1.14996.000: New Features: ============= This release is just compiled against the latest release of JetBrains ReSharper 5.1.1766.4 Previous release: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes...TweetSharp: TweetSharp v2.0.0.0 - Preview 9: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 9 ChangesAdded support for lists and suggested users Fixes based on user feedback Third Party Library VersionsHammock v1.1.6: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comjqGrid ASP.Net MVC Control: Version 1.2.0.0: jqGrid 3.8 support jquery 1.4 support New and exciting features Many bugfixes Complete separation from the jquery, & jqgrid codeMediaScout: MediaScout 3.0 Preview 4: Update ReleaseCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1: Coding4Fun.Phone.Toolkit v1MFCMAPI: January 2011 Release: Build: 6.0.0.1024 Full release notes at SGriffin's blog. If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. The 64 bit build will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit build, regardless of the operating system. Facebook BadgeAutoLoL: AutoLoL v1.5.4: Added champion: Renekton Removed automatic file association Fix: The recent files combobox didn't always open a file when an item was selected Fix: Removing a recently opened file caused an errorDotNetNuke® Community Edition: 05.06.01: Major Highlights Fixed issue to remove preCondition checks when upgrading to .Net 4.0 Fixed issue where some valid domains were failing email validation checks. Fixed issue where editing Host menu page settings assigns the page to a Portal. Fixed issue which caused XHTML validation problems in 5.6.0 Fixed issue where an aspx page in any subfolder was inaccessible. Fixed issue where Config.Touch method signature had an unintentional breaking change in 5.6.0 Fixed issue which caused...MiniTwitter: 1.65: MiniTwitter 1.65 ???? ?? List ????? in-reply-to ???????? ????????????????????????? ?? OAuth ????????????????????????????ASP.net Ribbon: Version 2.1: Tadaaa... So Version 2.1 brings a lot of things... Have a look at the homepage to see what's new. Also, I wanted to (really) improve the Designer. I wanted to add great things... but... it took to much time. And as some of you were waiting for fixes, I decided just to fix bugs and add some features. So have a look at the demo app to see new features. Thanks ! (You can expect some realeses if bugs are not fixed correctly... 2.2, 2.3, 2.4....)iTracker Asp.Net Starter Kit: Version 3.0.0: This is the inital release of the version 3.0.0 Visual Studio 2010 (.Net 4.0) remake of the ITracker application. I connsider this a working, stable application but since there are still some features missing to make it "complete" I'm leaving it listed as a "beta" release. I am hoping to make it feature complete for v3.1.0 but anything is possible.mytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.52.1 beta 2: New MVC3 RTM fix bug: Dropdown select fix bug: Add Store/Department and Add Store/Produser WEB.mytrip.mvc 1.0.52.1 Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) SRC.mytrip.mvc 1.0.52.1 System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager changes: RenderView controller extension works for razor also live demo switched to razorBloodSim: BloodSim - 1.3.3.1: - Priority update to resolve a bug that was causing Boss damage to ignore Blood Shields entirelyRawr: Rawr 4.0.16 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of this release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. W...MvcContrib: an Outer Curve Foundation project: MVC 3 - 3.0.51.0: Please see the Change Log for a complete list of changes. MVC BootCamp Description of the releases: MvcContrib.Release.zip MvcContrib.dll MvcContrib.TestHelper.dll MvcContrib.Extras.Release.zip T4MVC. The extra view engines / controller factories and other functionality which is in the project. This file includes the main MvcContrib assembly. Samples are included in the release. You do not need MvcContrib if you download the Extras.N2 CMS: 2.1.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. 2.1.1 Maintenance release List of changes 2.1 Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open...New ProjectsAutomatic content Publishing for SharePoint 2010 using PowerShell script: While working on SharePoint publishing portals, many times we require the automated publishing of contents. I thought of writing script that has good options to choose from and, will automate the publishing of content.Basic Events: Basic Events makes it easier for developers to use out of the box events with basic properties in their eventargs like string message and datetime.Benedictus 3000: Ici on fait bien les choses. Rien de moins que la totale, et rien de plus. N'essayez pas d'en faire plus que nous, vous allez vous faire mal.CPEBook by FMUG & TPAY: CPEBook by MUG & TPAY Projet dot NET CPEBookDust2: ?.NET???，??ActiveRecord??????????。Dust2????ruby on rails?ActiveRecord???，?????.NET?????C#????。 Dust2????、????、??、??、????? ???????，Dust2???Migrations??！EaseCode: Want acces to paths that require long line codes? we make it 2 words want battery percentage, windows version, username, appdata, program files, etx. you get acces to that all by typing 2 words Enhanced Host File Manager: Enhanced Host File Editor / Manager Intended for web development (developers or designers) to switch between development and live easily, hassle free. Full access to the host file is required. It is assumed that host file is at default location: C:\Windows\System32\drivers\etc\Intervals: This class library, written in C# for .NET 3.5 and 4.0, allows you to work with intervals, with various utility methods that simplify the work. It will allow you to find overlapping regions, create interval slices, do slice calculations, etc.KeyboardMouseHooks C# Library: KeyboardMouseHooks C# classes are part of RamGec Tools collection for .NET developers. It enables you, in a very easy, optimized and OO-way, via C# events system to install and track low level Windows keyboard and mouse hooks.Lightning Talk Countdown Timer: This application is 5 minutes countdown timer for Lightning Talk. ???????????5????????????????。MASCOT2CSV: This simple tool combines input and output data for/to MASCOT protein database into one csv file to make it comparable by human reader.MD5FileCalculator: Windows application showing the MD5 Hash for a fileMux Log Cleaner: A simple text file log cleaner for use with text-based RPGs (MUX, MUSH, MUD, MOO, etc.) which filters out common out of character output and allows custom filters. Requires .NET framework 3.5 (4.0 doesn't seem to work with it presently)MyUtil: ???????Orchard Module Visual Studio Project Template: Visual Studio Project Template installer for Orchard ModulesOutlook Social Connector C# sample with Setup Project: The Outlook 2010 Social Connector allows you to integrate (mash-up) feeds from other Web 2.0 sites. This example comes with a Setup project that will help you publish and deploy your project PAEPing: a simple tool for pingingRegExEditor: RegExEditor makes it easier for .Net developers to design Regular Expressions. It is developed in C#.Shevek: Shevek is following the dotnetslackers.com "Building a StackOverflow inspired Knowledge Exchange" articlesstylecopmaker: stylecopmakerSystem.Json: System.Json is a basic implementation of Json parsing and usage, allowing easy consumption of Json data from any source. System.Json is called such as I feel this is the library that should simply be in .NET for handling Json.VtigercrmNet: ?.NET????vtigercrm????WPFTimer: A simple Timer in WPF.Xi Game Engine for XNA: Xi Game Engine is an evolution of the classic Ox Game Engine for XNA. It is a good foundation for modern 2D and 3D game applications. It features an all-in-one UI, 2D, and 3D editor. It is deeply integrated with game physics using Box2D and BEPU.Yet Another Silverlight Popup Menu: A Silverlight 4 popup menu example that includes separators, images, and finished sufficiently to configure in XAML.

  Read the article

• CodePlex Daily Summary for Saturday, January 22, 2011

  CodePlex Daily Summary for Saturday, January 22, 2011Popular ReleasesMinecraft Tools: Minecraft Topographical Survey 1.3: MTS requires version 4 of the .NET Framework - you must download it from Microsoft if you have not previously installed it. This version of MTS adds automatic block list updates, so MTS will recognize blocks added in game updates properly rather than drawing them in bright pink. New in this version of MTS: Support for all new blocks added since the Halloween update Auto-update of blockcolors.xml to support future game updates A splash screen that shows while the program searches for upd...StyleCop for ReSharper: StyleCop for ReSharper 5.1.14996.000: New Features: ============= This release is just compiled against the latest release of JetBrains ReSharper 5.1.1766.4 Previous release: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes...TweetSharp: TweetSharp v2.0.0.0 - Preview 9: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 9 ChangesAdded support for lists and suggested users Fixes based on user feedback Third Party Library VersionsHammock v1.1.6: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comjqGrid ASP.Net MVC Control: Version 1.2.0.0: jqGrid 3.8 support jquery 1.4 support New and exciting features Many bugfixes Complete separation from the jquery, & jqgrid codeMediaScout: MediaScout 3.0 Preview 4: Update ReleaseCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1: Coding4Fun.Phone.Toolkit v1MFCMAPI: January 2011 Release: Build: 6.0.0.1024 Full release notes at SGriffin's blog. If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. The 64 bit build will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit build, regardless of the operating system. Facebook BadgeAutoLoL: AutoLoL v1.5.4: Added champion: Renekton Removed automatic file association Fix: The recent files combobox didn't always open a file when an item was selected Fix: Removing a recently opened file caused an errorDotNetNuke® Community Edition: 05.06.01: Major Highlights Fixed issue to remove preCondition checks when upgrading to .Net 4.0 Fixed issue where some valid domains were failing email validation checks. Fixed issue where editing Host menu page settings assigns the page to a Portal. Fixed issue which caused XHTML validation problems in 5.6.0 Fixed issue where an aspx page in any subfolder was inaccessible. Fixed issue where Config.Touch method signature had an unintentional breaking change in 5.6.0 Fixed issue which caused...MiniTwitter: 1.65: MiniTwitter 1.65 ???? ?? List ????? in-reply-to ???????? ????????????????????????? ?? OAuth ????????????????????????????ASP.net Ribbon: Version 2.1: Tadaaa... So Version 2.1 brings a lot of things... Have a look at the homepage to see what's new. Also, I wanted to (really) improve the Designer. I wanted to add great things... but... it took to much time. And as some of you were waiting for fixes, I decided just to fix bugs and add some features. So have a look at the demo app to see new features. Thanks ! (You can expect some realeses if bugs are not fixed correctly... 2.2, 2.3, 2.4....)iTracker Asp.Net Starter Kit: Version 3.0.0: This is the inital release of the version 3.0.0 Visual Studio 2010 (.Net 4.0) remake of the ITracker application. I connsider this a working, stable application but since there are still some features missing to make it "complete" I'm leaving it listed as a "beta" release. I am hoping to make it feature complete for v3.1.0 but anything is possible.ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager changes: RenderView controller extension works for razor also live demo switched to razorBloodSim: BloodSim - 1.3.3.1: - Priority update to resolve a bug that was causing Boss damage to ignore Blood Shields entirelyRawr: Rawr 4.0.16 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of this release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. W...MvcContrib: an Outer Curve Foundation project: MVC 3 - 3.0.51.0: Please see the Change Log for a complete list of changes. MVC BootCamp Description of the releases: MvcContrib.Release.zip MvcContrib.dll MvcContrib.TestHelper.dll MvcContrib.Extras.Release.zip T4MVC. The extra view engines / controller factories and other functionality which is in the project. This file includes the main MvcContrib assembly. Samples are included in the release. You do not need MvcContrib if you download the Extras.Yahoo! UI Library: YUI Compressor for .Net: Version 1.5.0.0 - Jalthi: Updated solution to VS2010. New: Work Item #4450 - Optional MSBuild task parameter :: Do not error if no files were found. Fixed: Work Item #5028 - Output file encoding is the same as the optional MSBuild task encoding argument. Fixed: Work Item #5824 - MSBuilds where slow, after the first build due to the Current Thread being forced to en-gb, on none en-gb systems. Changed: Work Item #6873 - Project license changed from MS-PL to GPLv2. New: Added all the unit tests from the Java YU...N2 CMS: 2.1.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. 2.1.1 Maintenance release List of changes 2.1 Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open...DNN Menu Provider: 01.00.00 (DNN 5.X and newer): DNN Menu Provider v1.0.0Our first release build is a stable release. It requires at least DotNetNuke 5.1.0. Previous DNN versions are not suported. Major Highlights: Easy to use template system build on a selfmade and powerful engine. Ready for multilingual websites. A flexible translation integration based on the ASP.NET Provider Model as well as an build in provider for DNN Localization (DNN 5.5.X > required) and an provider for EALO Translation API. Advanced in-memory caching function...VidCoder: 0.8.1: Adds ability to choose an arbitrary range (in seconds or frames) to encode. Adds ability to override the title number in the output file name when enqueing multiple titles. Updated presets: Added iPhone 4, Apple TV 2, fixed some existing presets that should have had weightp=0 or trellis=0 on them. Added {parent} option to auto-name format. Use {parent:2} to refer to a folder 2 levels above the input file. Added {title:2} option to auto-name format. Adds leading zeroes to reach the sp...New Projectsagap: Système de gestion d'application.Blog in Silverlight With BlogEngine: I love silverlight and want to build my blog in silverlight base on BlogEngine.NETCavemanTools: Easy to use toolkit with extension methods and special goodies for faster development, written in C# on .Net 3.5. CloudCompanion: Windows Azure performance measurement & analytics tools.Delivery Madness: XNA Game Development ExampledFactor: Visual Studio Add-in. Provides extended refactoring options.GpSpotMe: El objetivo final de GPSmapPoint es mostrar la posición del usuario sobre un mapa topográfico, pero eso no es mas que una escusa para aprender y divertirse programando. Esta desarrollado en C# sobre .NET Compact Framework 3.5 y puede ser usado en teléfonos con Windows Mobile 6.xInvestment Calculator: Allows you to evaluate how much money you could have today if you invested to one of the predefined investment opportunities in the database at a given date.jbucknor: jbucknorLoad Generation: Generates load according to a given pattern over a long period of time for the given number of users. It can vary the load in different patters such as linear, exponential etc. Load can be generated on custom or standard protocol Orchard Profile Module: Provides user profilesOrchard Super Classic Theme: This Orchard Theme is used to demonstrate the dynamic themes capabilities offered by Orchard. Based on the Classic Theme for Orchard, you can chose among different variations from the Dashboard.Orchard Youtube Field Module: Youtube field for orchard.Osac DataLayer: Database layer to simplify the use of database connection, sql queries and commands. Powerd by OSAC. http://www.osac.nlPascal Design: Pascal Design. pascal design is for users writing pascal application or to students learning pascal and don't need to workout the design and want to make same fast "screens". it's developed in C#PathEditor: This tool simplified the access to the environment path variable. No long line, a nice grid for editing easy and secure with directory checking. PLG Graphic File Analyzer: PLG Analyzer is an application that loads a graphic scene described in PLG format, parses the file and displays the information in it on the screen in 3D coordinates using OpenTK for C#. This project is a university project (homework, not final project) so please bear in mind :)Read Application Cofiguration in Javascript: Would it be good , if "AppSettings" is accessed with "Javascript.Configuration.ConfigurationManager.AppSettings["ServiceUrl"]"?Route#: A Microsoft .NET 4.0 C#/F# application to load routes and find minimal paths. The application is meant to let user create a network of nodes and connections representing a web to route. Starting from a point A the application will find the minimal path to B.Send SMS: Send SMS allows you to send SMS (Short Messaging Service) to all mobile operators across India. It allows you to send SMS through popular service providers like Way2SMS, Full On Sms, Tezsms, Sms Inside and more.SocialMe: This is a simple Facebook, MySpace & Twitter client, but small!StockViewer: This is an interactive way to browse stocks.Thailand IC2011 Training: Using for IC2011 training at KU. Topic. Windows Presentation Foundation Silverlight Windows Phone 7 TipTip: Online oblozuvanjeWeb Content Compressor: The objective of this project is to compress any Javascript (js file or inline script at some web files) and Cascading Style Sheets to an efficient level that works exactly as the original source, before it was minified. The library also is integrated with MSBuildwuyuhu: wuyuhuXaml Mvp: With Xaml Mvp you can create Windows Phone 7 applications based on the MVP pattern. By seperating Data from Behaviour you still get the benefit of MVVM without your View Model becoming a fat-controller. Silverlight and WPF coming soon! Developed using C#XnaWavPack: Native C# wavpack decoder, intended for use with the dynamic sound API in XNA4.

  Read the article

• E-Business Suite Technology Sessions at OpenWorld 2012

  - by Max Arderius

  Oracle OpenWorld 2012 is almost here! We're looking forward to updating you on our products, strategy, and roadmaps. This year, the E-Business Suite Applications Technology Group (ATG) will participate in 25 speaker sessions, two Meet the Experts round-table discussions, five demoground booths and seven Special Interest Group meetings as guest speakers. We hope to see you at our sessions.  Please join us to hear the latest news and connect with senior ATG development staff. Here's a downloadable listing of all Applications Technology Group-related sessions with times and locations: FOCUS ON Oracle E-Business Suite - Applications Tools and Technology (PDF) General Sessions GEN8474 - Oracle E-Business Suite - Strategy, Update, and RoadmapCliff Godwin, SVP, Oracle Monday, Oct 1, 12:15 PM - 1:15 PM - Moscone West 2002/2004 In this session, hear Oracle E-Business Suite General Manager Cliff Godwin deliver an update on the Oracle E-Business Suite product line. This session covers the value delivered by the current release of Oracle E-Business Suite, the momentum, and how Oracle E-Business Suite applications integrate into Oracle’s overall applications strategy. You’ll come away with an understanding of the value Oracle E-Business Suite applications deliver now and will deliver in the future. GEN9173 - Optimize and Extend Oracle Applications - The Path to Oracle Fusion ApplicationsNadia Bendjedou, Oracle; Corre Curtice, Bhavish Madurai (CSC) Tuesday, Oct 2, 10:15 AM - 11:15 AM - Moscone West 3002/3004 One of the main objectives of this session is to help organizations build their IT roadmap for the next five years and be aligned with the Oracle Applications strategy in general and the Oracle Fusion Applications strategy in particular. Come hear about some of the common sense, practical steps you can take to optimize the performance of your Oracle Applications today and prepare your path to Oracle Fusion Applications for when your organization is ready to embrace them. Each step you take in adopting Oracle Fusion technology gets you partway to Oracle Fusion Applications. Conference Sessions CON9024 - Oracle E-Business Suite Technology: Latest Features and Roadmap Lisa Parekh, Oracle Monday, Oct 1, 10:45 AM - 11:45 AM - Moscone West 2016 This Oracle development session provides a comprehensive overview of Oracle’s product strategy for Oracle E-Business Suite technology, the capabilities and associated business benefits of recent releases, and a review of capabilities on the product roadmap. This is the cornerstone session for the Oracle E-Business Suite technology stack. Come hear about the latest new usability enhancements of the user interface; systems administration and configuration management tools; security-related updates; and tools and options for extending, customizing, and integrating Oracle E-Business Suite with other applications. CON9021 - Oracle E-Business Suite Future Directions: Deployment and System AdministrationMax Arderius, Oracle Monday, Oct 1, 3:15 PM - 4:15 PM - Moscone West 2016  What’s coming in the next major version of Oracle E-Business Suite 12? This Oracle Development session covers the latest technology stack, including the use of Oracle WebLogic Server (Oracle Fusion Middleware 11g) and Oracle Database 11g Release 2 (11.2). Topics include an architectural overview of the latest updates, installation and upgrade options, new configuration options, and new tools for hot cloning and automated “lights-out” cloning. Come learn how online patching (based on the Oracle Database 11g Release 2 Edition-Based Redefinition feature) will reduce your database patching downtimes to however long it takes to bounce your database server. CON9017 - Desktop Integration in Oracle E-Business Suite 12.1 Padmaprabodh Ambale, Gustavo Jimenez, Oracle Monday, Oct 1, 4:45 PM - 5:45 PM - Moscone West 2016 This presentation covers the latest functional enhancements in Oracle Web Applications Desktop Integrator and Oracle Report Manager, enhanced Microsoft Office support, and greater support for building custom desktop integration solutions. The session also presents tips and tricks for upgrading from Oracle Applications Desktop Integrator to Oracle Web Applications Desktop Integrator and Oracle Report Manager. CON9023 - Oracle E-Business Suite Technology Certification Primer and Roadmap Steven Chan, Oracle Tuesday, Oct 2, 10:15 AM - 11:15 AM - Moscone West 2016  Is your Oracle E-Business Suite technology stack up to date? Are you taking advantage of all the latest options and capabilities? This Oracle development session summarizes the latest certifications and roadmap for the Oracle E-Business Suite technology stack, including elements such as database releases and options, Java, Oracle Forms, Oracle Containers for J2EE, desktop operating systems, browsers, JRE releases, development and Web authoring tools, user authentication and management, business intelligence, Oracle Application Management Packs, security options, clouds, Oracle VM, and virtualization. The session also covers the most commonly asked questions about tech stack component support dates and upgrade implications. CON9028 - Minimizing Oracle E-Business Suite Maintenance DowntimesSantiago Bastidas, Elke Phelps, Oracle Tuesday, Oct 2, 11:45 AM - 12:45 PM - Moscone West 2016 This Oracle development session features a survey of the best techniques sysadmins can use to minimize patching downtimes. It starts with an architectural-level review of Oracle E-Business Suite fundamentals and then moves to a practical view of the various tools and approaches for downtimes. Topics include patching shortcuts, merging patches, distributing worker processes across multiple servers, running ADPatch in noninteractive mode, staged APPL_TOPs, shared file systems, deferring systemwide database tasks, avoiding resource bottlenecks, and more. An added bonus: hear about the upcoming Oracle E-Business Suite 12 online patching capabilities based on the groundbreaking Oracle Database 11g Release 2 Edition-Based Redefinition feature. CON9116 - Extending the Use of Oracle E-Business Suite with the Oracle Endeca PlatformOsama Elkady, Muhannad Obeidat, Oracle Tuesday, Oct 2, 11:45 AM - 12:45 PM - Moscone West 2018 The Oracle Endeca platform includes a leading unstructured data correlation and analytics engine, together with a best-in class catalog search and guided navigation solution, to improve the productivity of all types of users in your enterprise. This development session focuses on the details behind the Oracle Endeca platform’s integration into Oracle E-Business Suite. It demonstrates how easily you can extend the use of the Oracle Endeca platform into other areas of Oracle E-Business Suite and how you can bring in your own data and build new Oracle Endeca applications for Oracle E-Business Suite. CON9005 - Oracle E-Business Suite Integration Best PracticesVeshaal Singh, Oracle, Jeffrey Hand, Zebra Technologies Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2018 Oracle is investing across applications and technologies to make the application integration experience easier for customers. Today Oracle has certified Oracle E-Business Suite on Oracle Fusion Middleware 11g and provides a comprehensive set of integration technologies. Learn about Oracle’s integration offering across data- and process-centric integrations. These technologies can be used to address various application integration challenges and styles. In this session, you will get an understanding of how, when, and where you can leverage Oracle’s integration technologies to connect end-to-end business processes across your enterprise, including your Oracle Applications portfolio.  CON9026 - Latest Oracle E-Business Suite 12.1 User Interface and Usability EnhancementsPadmaprabodh Ambale, Oracle Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2016 This Oracle development session details the latest UI enhancements to Oracle Application Framework in Oracle E-Business Suite 12.1. Developers will get a detailed look at new features to enhance usability, offer more capabilities for personalization and extensions, and support the development and use of dashboards and Web services. Topics include new rich UI capabilities such as new home page features, Navigator and Favorites pull-down menus, REST interface, embedded widgets for analytics content, Oracle Application Development Framework (Oracle ADF) task flows, third-party widgets, a look-ahead list of values, inline attachments, pop-ups, personalization and extensibility enhancements, business layer extensions, Oracle ADF integration, and mobile devices. CON8805 - Planning Your Oracle E-Business Suite Upgrade from 11i to Release 12.1 and BeyondAnne Carlson, Oracle Tuesday, Oct 2, 5:00 PM - 6:00 PM - Moscone West 3002/3004 Attend this session to hear the latest Oracle E-Business Suite 12.1 upgrade planning tips from Oracle’s support, consulting, development, and IT organizations. You’ll get specific cross-product advice on how to understand the factors that affect your project’s duration, decide on your project’s scope, develop a robust testing strategy, leverage Oracle Support resources, and more. In a nutshell, this session tells you things you need to know before embarking upon your Release 12.1 upgrade project. CON9053 - Advanced Management of Oracle E-Business Suite with Oracle Enterprise ManagerAngelo Rosado, Oracle Tuesday, Oct 2, 5:00 PM - 6:00 PM - Moscone West 2016 The task of managing and monitoring Oracle E-Business Suite environments can be very challenging. Oracle Enterprise Manager is the only product on the market that is designed to monitor and manage all the different technologies that constitute Oracle E-Business Suite applications, including end user, midtier, configuration, host, and database management—to name just a few. Customers that have implemented Oracle Enterprise Manager have experienced dramatic improvements in system visibility and diagnostic capability as well as administrator productivity. The purpose of this session is to highlight the key features and benefits of Oracle Enterprise Manager and Oracle Application Management Suite for Oracle E-Business Suite. CON8809 - Oracle E-Business Suite 12.1 Upgrade Best Practices: Technical InsightIsam Alyousfi, Udayan Parvate, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 3011 This session is ideal for organizations thinking about upgrading to Oracle E-Business Suite 12.1. It covers the fundamentals of upgrading to Release 12.1, including the technology stack components and supported upgrade paths. Hear from Oracle Development about the set of best practices for patching in general and executing the Release 12.1 technical upgrade, with special considerations for minimizing your downtime. Also get to know about relatively recent upgrade resources. CON9032 - Upgrading Your Customizations of Oracle E-Business Suite 12.1Sara Woodhull, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 2016 Have you personalized Oracle Forms or Oracle Application Framework screens in Oracle E-Business Suite? Have you used mod_plsql in Release 11i? Have you extended or customized your Release 11i environment with other tools? The technical options for upgrading these customizations as part of your Oracle E-Business Suite Release 12.1 upgrade can be bewildering. Come to this Oracle development session to learn about selecting the best upgrade approach for your existing customizations. The session will help you understand customization scenarios and use cases, tools, and technologies to ensure that your Oracle E-Business Suite Release 12.1 environment fits your users’ needs closely and that any future customizations will be easy to upgrade. CON9259 - Oracle E-Business Suite Internationalization and Multilingual FeaturesMaher Al-Nubani, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 2018 Oracle E-Business Suite supports more countries, languages, and regions than ever. Come to this Oracle development session to get an overview of internationalization features and capabilities and see new Release 12 features such as calendar support for Hijra and Thai, new group separators, lightweight multilingual support (MLS) setup, new character sets such as AL32UTF, newly supported languages, Mac certifications, Oracle iSetup support for moving MLS setups, new file export options for Unicode, new MLS number spelling options, and more. CON7188 - Mobile Apps for Oracle E-Business Suite with Oracle ADF Mobile and Oracle SOA SuiteSrikant Subramaniam, Joe Huang, Veshaal Singh, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 3001 Follow your mobile customers, employees, and partners with Oracle Fusion Middleware. See how native iPhone and iPad applications can easily be built for Oracle E-Business Suite with the new Oracle ADF Mobile and Oracle SOA Suite. Using Oracle ADF Mobile, developers can quickly develop native applications for Apple iOS and other mobile platforms. The Oracle SOA Suite/Oracle ADF Mobile combination can execute business transactions on Oracle E-Business Suite. This session includes a demo in which a mobile user approves a business transaction in Oracle E-Business Suite and a demo of the tools used to build a native on-device solution. These concepts for mobile applications also apply to other Oracle applications.CON9029 - Oracle E-Business Suite Directions: Slashing Downtimes with Online PatchingKevin Hudson, Oracle Wednesday, Oct 3, 11:45 AM - 12:45 PM - Moscone West 2016 Oracle E-Business Suite will soon include online patching (based on the Oracle Database 11g Release 2 Edition-Based Redefinition feature), which will reduce your database patching downtimes to however long it takes to bounce your database server. This Oracle development session details how online patching works, with special attention to what’s happening at a database object level when database patches are applied to an Oracle E-Business Suite environment that’s still running. Come learn about the operational and system management implications for minimizing maintenance downtimes when applying database patches with this new technology and the related impact on customizations you might have built on top of Oracle E-Business Suite. CON8806 - Upgrading to Oracle E-Business Suite 12.1: Technical and Functional PanelAndrew Katz, Komori America Corporation; Sandra Vucinic, VLAD Group, Inc. ;Srini Chavali, Cummins Inc.; Amrita Mehrok, Nadia Bendjedou, Anne Carlson Oracle Wednesday, Oct 3, 1:15 PM - 2:15 PM - Moscone West 2018 In this panel discussion, Oracle experts, customers, and partners share their experiences in upgrading to the latest release of Oracle E-Business Suite, Release 12.1. The panelists cover aspects of a typical Release 12 upgrade, technical (upgrading the technical infrastructure) as well as functional (upgrading to the new financial infrastructure). Hear directly from the experts who either develop the product or support, implement, or upgrade it, and find out how to apply their lessons learned to your organization. CON9027 - Personalize and Extend Oracle E-Business Suite Applications with Rich MashupsGustavo Jimenez, Padmaprabodh Ambale, Oracle Wednesday, Oct 3, 1:15 PM - 2:15 PM - Moscone West 2016 This session covers the use of several Oracle Fusion Middleware technologies to personalize and extend your existing Oracle E-Business Suite applications. The Oracle Fusion Middleware technologies covered include Oracle Application Development Framework (Oracle ADF), Oracle WebCenter, Oracle Endeca applications, and Oracle Business Intelligence Enterprise Edition with Oracle E-Business Suite Oracle Application Framework applications. CON9036 - Advanced Oracle E-Business Suite Architectures: Maximum Availability, Security, and MoreElke Phelps, Oracle Wednesday, Oct 3, 3:30 PM - 4:30 PM - Moscone West 2016 This session includes architecture diagrams and configuration instructions for building a maximum availability architecture (MAA) that will help you design a disaster recovery solution that fits the needs of your business. Database and application high-availability features it describes include Oracle Data Guard, Oracle Real Application Clusters (Oracle RAC), Oracle Active Data Guard, load-balancing Web and forms services, parallel concurrent processing, and the use of Oracle Exalogic and Oracle Exadata to provide a highly available environment. The session also covers the latest updates to systems management tools, AutoConfig, cloud computing, virtualization, and Oracle WebLogic Server and provides sneak previews of upcoming functionality. CON9047 - Efficiently Scaling Oracle E-Business Suite on Oracle Exadata and Oracle ExalogicIsam Alyousfi, Nishit Rao, Oracle Wednesday, Oct 3, 5:00 PM - 6:00 PM - Moscone West 2016 Oracle Exadata and Oracle Exalogic are designed from the ground up with optimizations in software and hardware to deliver superfast performance for mission-critical applications such as Oracle E-Business Suite. Oracle E-Business Suite applications run three to eight times as fast on the Oracle Exadata/Oracle Exalogic platform in standard benchmark tests. Besides performance, customers benefit from simplified support, enhanced manageability, and the ability to consolidate multiple Oracle E-Business Suite instances. Attend this session to understand best practices for Oracle E-Business Suite deployment on Oracle Exalogic and Oracle Exadata through customer case studies. Learn how adopting the Exa* platform increases efficiency, simplifies scaling, and boosts performance for peak loads. CON8716 - Web Services and SOA Integration Options for Oracle E-Business SuiteRekha Ayothi, Veshaal Singh, Oracle Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 2016 This Oracle development session provides a deep dive into a subset of the Web services and SOA-related integration options available to Oracle E-Business Suite systems integrators. It offers a technical look at Oracle E-Business Suite Integrated SOA Gateway, Oracle SOA Suite, Oracle Application Adapters for Data Integration for Oracle E-Business Suite, and other Web services options for integrating Oracle E-Business Suite with other applications. Systems integrators and developers will get an overview of the latest integration capabilities and technologies available out of the box with Oracle E-Business Suite and possibly a sneak preview of upcoming functionality and features. CON9030 - Recommendations for Oracle E-Business Suite Performance TuningIsam Alyousfi, Samer Barakat, Oracle Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 2018 Need to squeeze more performance out of your existing servers? This packed Oracle development session summarizes practical tips and lessons learned from performance-tuning and benchmarking the world’s largest Oracle E-Business Suite environments. Apps sysadmins will learn concrete tips and techniques for identifying and resolving performance bottlenecks on all layers, with special attention to application- and database-tier servers. Learn about tuning Oracle Forms, Oracle Concurrent Manager, Apache, and Oracle Discoverer. Track down memory leaks and other issues at the Java and JVM layers. The session also covers Oracle E-Business Suite product-level tuning, including Oracle Workflow, Oracle Order Management, Oracle Payroll, and other modules. CON3429 - Using Oracle ADF with Oracle E-Business Suite: The Full Integration ViewSiva Puthurkattil, Lake County; Juan Camilo Ruiz, Sara Woodhull, Oracle Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 3003 Oracle E-Business Suite delivers functionality for handling the core business of your organization. However, user requirements and new technologies are driving an emerging need to implement new types of user interfaces for these applications. This session provides an overview of how to use Oracle Application Development Framework (Oracle ADF) to deliver cutting-edge Web 2.0 and mobile rich user interfaces that front existing Oracle E-Business Suite processes, and it also explores all the existing types of integration between the two worlds. CON9020 - Integrating Oracle E-Business Suite with Oracle Identity Management SolutionsSunil Ghosh, Elke Phelps, Oracle Thursday, Oct 4, 12:45 PM - 1:45 PM - Moscone West 2016 Need to integrate Oracle E-Business Suite with Microsoft Windows Kerberos, Active Directory, CA Netegrity SiteMinder, or other third-party authentication systems? Want to understand your options when Oracle Premier Support for Oracle Single Sign-On ends in December 2011? This Oracle Development session covers the latest certified integrations with Oracle Access Manager 11g and Oracle Internet Directory 11g, which can be used individually or as bridges for integrating with third-party authentication solutions. The session presents an architectural overview of how Oracle Access Manager, its WebGate and AccessGate components, and Oracle Internet Directory work together, with implications for Oracle Discoverer, Oracle Portal, and other Oracle Fusion identity management products. CON9019 - Troubleshooting, Diagnosing, and Optimizing Oracle E-Business Suite TechnologyGustavo Jimenez, Oracle Thursday, Oct 4, 2:15 PM - 3:15 PM - Moscone West 2016 This session covers how you can proactively diagnose Oracle E-Business Suite applications, including extensions built with Oracle Fusion Middleware technologies such as Oracle Application Development Framework (Oracle ADF) and Oracle WebCenter to catch potential issues in the middle tier before they become more serious. Topics include debugging, logging infrastructure, warning signs, performance tuning, information required when logging service requests, general JVM optimization, and an overall picture of all the moving parts that make it possible for Oracle E-Business Suite to isolate and fix problems. Also learn how Oracle Diagnostics Framework will help prevent downtime caused by failures. CON9031 - The Top 10 Things You Can Do to Secure Your Oracle E-Business Suite InstanceEric Bing, Erik Graversen, Oracle Thursday, Oct 4, 2:15 PM - 3:15 PM - Moscone West 2018 Learn the top 10 things you can do to secure your applications and your sensitive data. This Oracle development session for system administrators and security professionals explores some of the most important and overlooked things you can do to secure your Oracle E-Business Suite instance. It also covers data masking and other mechanisms for protecting sensitive data. Special Interest Groups (SIG) Some of our most senior staff have been invited to participate on the following SIG meetings as guest speakers: SIG10525 - OAUG - Archive & Purge SIGBrian Bent - Pre-Sales Engineer, TierData, Inc. Sunday, Sep 30, 10:30 AM - 12:00 PM - Moscone West 3011 The Archive and Purge SIG is an organization in which users can share their experiences and solicit functional and technical advice on archiving and purging data in Oracle E-Business Suite. This session provides an opportunity for users to network and share best practices, tips, and tricks. Guest: Oracle E-Business Suite Database Performance, Archive & Purging - Q&A SessionIsam Alyousfi, Senior Director, Applications Performance, Oracle SIG10547 - OAUG - Oracle E-Business (EBS) Applications Technology SIGSrini Chavali - IT Director, Cummins Inc Sunday, Sep 30, 10:30 AM - 12:00 PM - Moscone West 3018 The general purpose of the EBS Applications Technology SIG is to inform and educate its members about current and future components of the tech stack as they relate to Oracle E-Business Suite. Attend this meeting for networking and education and to share best practices. Guest: Oracle E-Business Suite Technology Certification Roadmap - Presentation and Q&ASteven Chan, Sr. Director, Applications Technology Group, Oracle SIG10559 - OAUG - User Management SIGSusan Behn - VP of Oracle Delivery, Infosemantics, Inc. Sunday, Sep 30, 10:30 AM - 12:00 PM - Moscone West 3024 The E-Business Suite User Management SIG focuses on the components of user management that enable Oracle E-Business Suite users to define administrative functions and manage users’ access to functions and data based on roles within an organization—rather than the user’s individual identity—which is referred to as role-based access control (RBAC). This meeting includes an introduction to Oracle User Management that covers the Oracle User Management building blocks and presents an example of creating a security policy.Guest: Security and User Management - Q&A SessionEric Bing, Sr. Director, EBS Security, OracleSara Woodhull, Principal Product Manager, Applications Technology Group, Oracle SIG10515 - OAUG – Upgrade SIGBarbara Matthews - Consultant, On Call DBASandra Vucinic, VLAD Group, Inc. Sunday, Sep 30, 12:00 PM - 2:00 PM - Moscone West 3009 This Upgrade SIG session starts with a business meeting and then features a Q&A panel discussion on Oracle E-Business Suite upgrade topics. The session• Reviews Upgrade SIG goals and objectives• Provides answers, during the Q&A session, to questions related to Oracle E-Business Suite upgrades• Shares “real world” experiences, tips, and techniques for Oracle E-Business Suite upgrades to Release 12.1. Guest: Oracle E-Business Suite Upgrade - Q&A SessionAnne Carlson - Sr. Director, Oracle E-Business Suite Product Strategy, OracleUdayan Parvate - Director, EBS Release Engineering, OracleSuzana Ferrari, Sr. Principal Consultant, OracleIsam Alyousfi, Sr. Director, Applications Performance, Oracle SIG10552 - OAUG - Oracle E-Business Suite SIGDonna Rosentrater - Manager, Global Sourcing & Procurement Systems, TJX Sunday, Sep 30, 12:15 PM - 1:45 PM - Moscone West 3020 The E-Business Suite SIG, affiliated with OAUG, supports Oracle E-Business Suite users through networking, education, and sharing of best practices. This SIG meeting will feature a general discussion of Oracle E-Business Suite product strategies in Release 12 and migration to Oracle Fusion Applications. Guest: Oracle E-Business Suite - Q&A SessionJeanne Lowell, Vice President, EBS Product Strategy, OracleNadia Bendjedou, Sr. Director, Product Strategy, Oracle SIG10556 - OAUG - SysAdmin SIGRandy Giefer - Sr Systems and Security Architect, Solution Beacon, LLC Sunday, Sep 30, 12:15 PM - 1:45 PM - Moscone West 3022 The SysAdmin SIG provides a forum in which OAUG members and participants can share updates, tips, and successful practices relating to system administration in an Oracle applications environment. The SysAdmin SIG strives to enable system administrators to become more effective and efficient in their jobs by providing them with access to people and information that can increase their system administration knowledge and experience. Attend this meeting to network, share best practices, and benefit from educational content. Guest: Oracle E-Business Suite 12.2 Online Patching- Presentation and Q&AKevin Hudson, Sr. Director, Applications Technology Group, Oracle SIG10553 - OAUG - Database SIGMichael Brown - Senior DBA, COLIBRI LTD LC Sunday, Sep 30, 2:00 PM - 3:15 PM - Moscone West 3020 The OAUG Database SIG provides an opportunity for applications database administrators to learn from and share their experiences with supporting the various Oracle applications environments. This session will include a brief business meeting followed by a short presentation. It will end with an open discussion among the attendees about items of interest to those present. Guest: Oracle E-Business Suite Database Performance - Presentation and Q&AIsam Alyousfi, Sr. Director, Applications Performance, Oracle Meet the Experts We're planning two round-table discussions where you can review your questions with senior E-Business Suite ATG staff: MTE9648 - Meet the Experts for Oracle E-Business Suite: Planning Your Upgrade Jeanne Lowell - VP, EBS Product Strategy, Oracle John Abraham - Sr. Principal Product Manager, Oracle Nadia Bendjedou - Sr. Director - Product Strategy, Oracle Anne Carlson - Sr. Director, Applications Technology Group, Oracle Udayan Parvate - Director, EBS Release Engineering, Oracle Isam Alyousfi, Sr. Director, Applications Performance, Oracle Monday, Oct 1, 3:15 PM - 4:15 PM - Moscone West 2001A Don’t miss this Oracle Applications Meet the Experts session with experts who specialize in Oracle E-Business Suite upgrade best practices. This is the place where attendees can have informal and semistructured but open one-on-one discussions with Strategy and Development regarding Oracle Applications strategy and your specific business and IT strategy. The experts will be available to discuss the value of the latest releases and share insights into the best path for your enterprise, so come ready with your questions. Space is limited, so make sure you register. MTE9649 - Meet the Oracle E-Business Suite Tools and Technology Experts Lisa Parekh - Vice President, Technology Integration, Oracle Steven Chan - Sr. Director, Oracle Elke Phelps - Sr. Principal Product Manager, Applications Technology Group, Oracle Max Arderius - Manager, Applications Technology Group, Oracle Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2001A Don’t miss this Oracle Applications Meet the Experts session with experts who specialize in Oracle E-Business Suite technology. This is the place where attendees can have informal and semistructured but open one-on-one discussions with Strategy and Development regarding Oracle Applications strategy and your specific business and IT strategy. The experts will be available to discuss the value of the latest releases and share insights into the best path for your enterprise, so come ready with your questions. Space is limited, so make sure you register. Demos We have five booths in the exhibition demogrounds this year, where you can try ATG technologies firsthand and get your questions answered. Please stop by and meet our staff at the following locations: Advanced Architecture and Technology Stack for Oracle E-Business Suite (W-067) New User Productivity Capabilities in Oracle E-Business Suite (W-065) End-to-End Management of Oracle E-Business Suite (W-063) Oracle E-Business Suite 12.1 Technical Upgrade Best Practices (W-066) SOA-Based Integration for Oracle E-Business Suite (W-064)

  Read the article

< Previous Page | 79 80 81 82 83 84  | Next Page >