Search Results

Search found 7843 results on 314 pages for 'power over ethernet'.

Page 83/314 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90 | Next Page >

Graciously shutdown external HDD enclosure?

- by Jakobud

I recently purchased a large HDD along with the following HDD enclosure: http://www.newegg.com/Product/Product.aspx?Item=N82E16817173043 It has a simple on-off switch on the back. When I want to turn this thing off, do I simply just flip the switch? I assume the switch simply kills the power to the HDD, but isn't that potentially a bad thing in the case that the HDD is still reading/writing? I used to have a Seagate external HDD and it had a button on the front that I had to hold down for a second or two before it would turn off, but it at least appeared to sort of go through a shutdown procedure where it probably would stop the HDD activity before cutting power. So with this external HDD, I'm a little bit leery about that power switch and understanding exactly what it does. Is this how all HDD enclosures are? EDIT: I'm running the drive in Ubuntu Server. So there is no 'ejecting' the drive lol

Read the article
Does a portable secondary laptop LCD monitor exist?

- by Dougnukem

I'm looking to buy a portable secondary LCD monitor for my Macbook Pro, does anything like that exist? I found some laptops that provide a dual 15'' monitor solution (but it's already baked into the hardware). Also some ideas posted about creating this type of setup back in 2007. I'm looking for something that is as thin as a laptop LCD (with maybe a bulky power supply that I could easily daisy chain or plug into a power strip along with my laptop). How difficult would it be to buy a 17'' laptop screen and hook up a DVI connector and power supply, and build a simple monitor stand for it? I've gotten to used to a dual-monitor setup at work and at home with my laptop that having to use my laptop in single-screen mode makes me feel crippled.

Read the article
Is it my motherboard?

- by jarodrussell

Early this week my home server (a Linux machine) threw a kernel panic. Yesterday is happened a couple of times. Then all of a sudden, when I plugged a USB stick in to run a memory test, the monitor stopped coming on. Now whenever I turn it on, the system gets power...I heard the drives spin, I see the processor fan spin, and the hard drive light comes on...but nothing happens. I put a video card in the AGP slot, but still nothing. The light on the power button that usually comes on stopped coming on. I took the memory out to see if it would beep, but nothing beeped. It's like it's getting power, but it's not coming on. Does this sound like a motherboard problem to anyone else? I think it is, but a second opinion would be greatly appreciated. Thanks.

Read the article
Keep lan connection alive while going to sleep

- by user18151

Is it possible to keep lan connection alive when going to sleep? Although I would like a laptop independent(in general) answer, my laptop is Thinkpad T500 and the power manager shows in PCI options, the following three option regarding saving link state power: Off, moderate, maximum. Also instant resume apparently does something different, so that isn't much help either. I'm on Windows-7. Here's why: I'm a student, and currently I keep my laptop on almost all the time, but sometimes I sleep it and then I require to check something, so I turn it on. But then internet starts in at least a minute. So I avoid even putting it to sleep. I want that the internet connection should persist, so that I can put it to sleep to avoid power consumption.

Read the article
EMC CX3-10c Fault Condition won;t clear

- by ITGuy24

We have an old CX3-10c from Dell that had both Standby Power Supplies (SPS) fail. This obviously caused a fault on the system and disabled the cache. We have replaced the SPS's and they test fine as do all other components. Problem is there is still a fault on the "Enclosure SPE [SPE3]" despite all the component in the enclosure showing as good. I was on the line with Dell Gold support for 3 hours yesterday, they have had me restart the SPs multiple times, as well as reseat the power supplies, even shutdown the system completely and power it back on. All to no avail. Fault remains and cache cannot be re-enabled so long as the Fault is present. Any suggestions on clearing this erroneous fault?

Read the article
Why is hibernation still used?

- by Moses

I've never quite understood the original purpose of the Hibernation power state in Windows. I understand how it works, what processes take place, and what happens when you boot back up from Hibernate, but I've never truly understood why it's used. With today's technology, most notably with SSDs, RAM and CPUs becoming faster and faster, a cold boot on a clean/efficient Windows installation can be pretty fast (for some people, mere seconds from pushing the power button). Standby is even faster, sometimes instantaneous. Even SATA drives from 5-6 years ago can accomplish these fast boot times. Hibernation seems pointless to me when modern technology is considered, but perhaps there are applications that I'm not considering. What was the original purpose behind hibernation, and why do people still use it? Edit: I rescind my comment about hibernation being obsolete, as it obviously has very practical applications to laptops and mobile PCs, considering the power restrictions. I was mostly referring to hibernation being used on a desktop.

Read the article
3 wire computer fan won't run continuously

- by Ben

I had an old computer that didn't work anymore, so I took the CPU fan out to see what I could make with it. The fan is NMB model number BG0903-B044-VTL, like this. It has three wires coming off of it, red, black, and white. I know that the white wire is usually a speed sensor. Does this wire need to be connected to something in order for the fan to run continuously? Right now when I apply power to the red and black wires (from a 9-volt battery) the fan will spin very briefly, and then slow down until it stops. The fan's motor only spins in the instant that the power is turned on, but doesn't continue, even though the power is still applied. How can I get the fan to spin continuously?

Read the article
What do I need to connect a hard disk to my laptop via non powered eSata?

- by Ludo

Hi there. I'm looking at getting a hard disk for my laptop (OCZ Vertex 2 SSD) which I would like to connect via eSata. My laptop has an eSata port, but it's not powered (Thinkpad T410). I presume this means I need more than just an eSata to eSata cable as it needs power, so does this mean I need a caddy for the hard disk as well which will provide power to the drive, or do I need one of them eSata cables that has a USB attachment too? I don't think the drive will come with a power supply. I realise this seems simple but I can't find an obvious answer online. Thanks for any assistance! Ludo.

Read the article
help building a PC that can image a dozen hard drives simultaneously

- by Bigbio2002

Not sure if this belongs on here or SuperUser, but here goes... I'm trying to figure out how to make a mass hard drive imaging PC out of COTS parts. A dedicated imaging device can do 10 drives at a time, but costs several thousand dollars. So far, I'm thinking to use several 3-port PCI-E Firewire cards, and use some kind of Firewire-to-IDE adapter to connect the drives themselves. The "software" would consist of scripting diskpart, or some other imaging utility. The problem is that I can't seem to find any sort of adapter. I could use standard external hard drive bays, but then I'd have a dozen power cables that I need to plug in. Ugly, messy, and inefficient. I picked Firewire over USB not only for better transfer speeds, but also because FW can deliver power over the bus (and could theoretically power a hard drive). Does anyone have any input on this?

Read the article
ASUS EeePC 1001PX, hard disk clicking in Ubuntu Maverick

- by MeanEYE

I just received my new Asus EeePC 1001px netbook. After installing Ubuntu 10.10 on it, I've noticed that my hard drive is making a clicking noise. Now this is not a loud clicking noise nor it's constant (only sounds occasionally and when hard disk is not writing or reading anything). Another strange thing is, this only happens when netbook is using battery power, the moment I plug in AC power clicking stops. Additionally I noticed that when I go into BIOS I can hear the click only once, same thing happens if I boot Ubuntu from USB. That led me to believe the problem is within operating system. I did all the surface scans and SMART tests and everything seems to be fine. Now noise sounds like heads are trying to "park" themselves so I tried disabling "spin down" option in Power Management but it didn't help. Any idea?

Read the article
Is it safe to operate a laptop without battery?

- by leladax

I know it's 'unsafe' in terms of data loss but I noticed motherboards still have some of their circuits on power when they are plugged in [e.g. a circuit that must wait for power-on signals is certainly one of them]. Hence, I wondered if it would increase the life of the laptop if the battery was simply off. Let alone that may also increase battery life, but that's the least of my concerns. Notice the main point is to plug it off on hibernate and have no power source whatsoever for the duration of being off (apart from the clock battery). (i.e. saving having to plug off the battery every time)

Read the article
Handout export to word from PowerPoint are too big :(

- by nickjohn

EDITED i am using power point lectures. i want to mail merge speaker data into the respective lecture. now thats not possible with ppt as far i know, so i have to convert these lectures to handout by using power point option "publishMS word handouts" and use word mail merger. this is good since it will keep the comments/notes added in slides in handouts aswell. but these exported handouts in word remain actual slides and retain link to original ppt rather than simply get exported as images. so the file size gets verrry big 10mb ppt = 212mb doc=88mb docx Is there any option to convert handouts exported from power point to word as images? i simply cant save them as pngs from powerpoint since that will not include the comments data. Thanks

Read the article
How can I get data off of a damaged thumb drive?

- by Lord Torgamus

A guy I work with just came by to ask me about a damaged thumb drive/USB flash drive. Apparently his son dropped it on a hard surface and it won't power up anymore. They've tried plugging it into multiple machines without success, even though each port they tried was able to power other USB devices. He knows it's not a lost cause because a local tech store is offering to recover the data for $500, but he says they're not worth that much. I figured someone on SU would have an idea about this; he doesn't care about using the drive in the future, just wants to salvage a few files that would be a pain to recreate. Is this possible without advanced equipment, and if so, how? He said he already tried the advice on the Internet about typing in different drive letters and such, but that failed because there was no power going to the drive. He also said that he opened the case up at one point, but I'm not sure what, if anything, he did inside.

Read the article
Computer powers off then tries to start up but resets repeatedly.

- by Sam Holder

My machine has started shutting itself off after a few minutes on, everything goes off. A few seconds (3-5) after everything has stopped the lights come back on, the cpu fan and gfx card come on again. They spin for a second, then everything goes off again. A few seconds later same things happens again, light come back on, fans spin for a few seconds then go off. This repeats seemingly forever. If I leave it for a while I can power the machine back on for a while and it will boot again. It will then stay on for a little while again before power off. Rinse and repeat. Is this likely to be power supply or something else? The machine has been up and running for a couple of years before this.

Read the article
Is it safe to operate a laptop without battery?

- by leladax

I know it's 'unsafe' in terms of data loss but I noticed motherboards still have some of their circuits on power when they are plugged in [e.g. a circuit that must wait for power-on signals is certainly one of them]. Hence, I wondered if it would increase the life of the laptop if the battery was simply off. Let alone that may also increase battery life, but that's the least of my concerns. Notice the main point is to plug it off on hibernate and have no power source whatsoever for the duration of being off (apart from the clock battery). (i.e. saving having to plug off the battery every time)

Read the article
Computer hangs on start-up, but re-start always works

- by user10604

I press the power switch; the fans start whirring; then precisely nothing happens. The monitor lights (I have two monitors) blink to indicate that they aren't receiving any signal - no BIOS splash screen, nothing. This scenario occurs about 80 percent of the time, the other 20 percent being normal starts. Noticing that the computer has not started properly, I press the power switch for four seconds to turn the computer off, and then I press it again to start the computer for the second time. It always starts normally the second time. Always. The power supply is a 750W from SilverStone. The motherboard is a Gigabyte P55A-UD3P. The video card is an Asus EN9800GT. There's 8 GB of RAM. I don't know what other information might be pertinent. Help!

Read the article
How to properly set CPU Units for OpenVz VEs

- by gucki

According to all the sources I read (openvz wiki, various mailinglists, forums, ..) the values of the cpuunits settings are relative to each other. So when all are equal and the system is busy, all receive the same cpu share. But something still puzzles me with that: why is there a tool "vzcpucheck" which shows "the power of the node/ host": Current CPU utilization: 18000 Power of the node: 880001 Why is there (do I need) an absolute number when all settings are only relative? Shouldn't those two settings result in exactly the same? ve1: 1 ve2: 1 ve3: 1 = 3 ve1: 293334 ve1: 293334 ve1: 293334 = 880001 (power of the node) What's the difference?

Read the article
Motherboard or Processor Problem

- by bradlis7

My computer is broken, but I'm having trouble narrowing down the issue. I replaced the power supply, because I assumed that was the issue, but it has the same problem. The issue started with my computer starting the fans and running, but it didn't get to the BIOS screen for about 10 seconds. Now it refuses to do anything when the power button is pressed, except when I turn off the machine and take the processor out for 10-20 seconds, then put it back in, I came hit the power button immediately, and the fans start for 1/2 second, and quit. Does this sound like a is a processor or motherboard issue? I removed all components, so I know that the issue is with one of these two things.

Read the article
How can I prevent my computer from waking up accidentally?

- by Ivo Flipse

When I put my computer into sleep mode, it will wake up while I'm away from it. There's nothing near the computer that could move the mouse or accidentally press a button and I have no idea what might be causing it. I tried checking what woke it, apparently LASTWAKE only tells me that it has been in sleep mode, not what woke it up. I also couldn't find anything in my Power Options regarding Sleep that seems off. Poking around in the Event Viewer I notice the following: The Power-Troubleshooter event at the top notes the following: The system has returned from a low power state. Sleep Time: ?2012?-?10?-?27T11:31:53.408927000Z Wake Time: ?2012?-?10?-?27T12:25:51.887029300Z Wake Source: Unknown So does anyone have an idea to find out what might be causing it and how I can prevent my computer from randomly waking up?

Read the article
Asus Z8NA-D6, not powering up/no signal for monitor

- by s093294

I have a Asus Z8NA-D6 motherboard. Been running fine so far with one E5504 Xeon processor. I have added another Xeon E5504 CPU to the second slot and it will not power up (or there is no signal to the monitor). The status lights turn on as normal. no error led. Nothing happens other then the leds start and both cpus/fans power up. HDD power up. I tried clearing CMOS. Any sugestions? http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6/#download Update. Removing ram for second cpu makes it boot atleast. itboots with memory pluged in for cpu 1. (2 4gb modules) when addin one more to the second cpu it still boots but bios only see the 2 blocks at cpu 1)

Read the article
Viewsonic monitor keeps showing its on-screen menu incessantly

- by markvgti

Since yesterday my Viewsonic 22" monitor (VX2255wmb) keeps showing its on-screen menu incessantly, without my touching any of its buttons. The menu comes on in the centre of the screen, stays on for 8-10 seconds, disappears for a second or two, then repeats the cycle. This happens whenever there's a signal being sent to the monitor. I can't actually navigate the menu when it appears on-screen. Pressing the power button, or the Up and Down buttons on its right edge dismiss the menu, only for it to reappear again. These symptoms have appeared before, but earlier they'd stop after 5-10 mins. The power button on the monitor has always been iffy, but now it doesn't seem to be working at all--have to switch off power supply from mains when I leave my desk. Using DVI input on this monitor as my HP desktop has DVI output.

Read the article
vmware takes too much time to shut down

- by user33754

Each time I shuting down my virtual machine - it takes like 30 minutes for VM Ware to complete the process. The shut down is done, but it shows a black screen and doesn't respond to any command. I can't do a Power Power OFF or Power Suspend. When I click it - nothing changes. When trying to close - it says "still busy". This happens only when using a Virtual Machine stored on an external hard drive. When Virtual Machine files are stored on a local drive - everything is OK. Hard drive is working good. Any suggestions how can I investigate the issue?

Read the article
My Computer will not turn on?

- by user269120

I recently built a gaming pc. It was working fine before the following events: I installed a graphics card driver update then: in windows it said that the user experience index needed to be refreshed, so i started the test and somewhere in the middle of the test my pc just switched off. No shutting down just stopped. Now it won't turn back on. I have checked its plugged in and the switch on psu is down, i tried a different power cable and i checked all the connections. When i press the power button nothing happens, no fans no lights no post beep. Computer Parts: Motherboard: Gigabyte GA78LMT-USB3 CPU: AMD FX-6350 @ 3.9 Ghz RAM: 2x4gb Crucial Ballistix Sport Power Supply: Tesla 750w psu Graphics card: XFX Radeon 7870 DD Case: CiT Vantage R Gaming Case Hard Drive: 2TB Western Digital Caviar Green Please help me, this computer is only a week old since i built it. All anwsers are appreciated :)

Read the article
Sony Vaio Sleep Mode

- by someone11

I have a problem with the sleep mode on Sony Vaio F Series and Windows 7 x64. If I wake it up by opening the lid and pressing power button everything works fine. However, if I wake it up on some other way (e.g. move the mouse), power light turns green and fan starts spinning, but LCD is dark and I cannot use keyboard (well, actually there is no sign that anyting works). Only thing I can do is to reboot it by pressing power button. Does anyone know what could be the problem?

Read the article
Windows 8: How to Lock (not sleep) laptop on lid close?

- by Eye of Hell

If my laptop is connected to power source and is not configured to sleep on lid close (it is connected to power source and is working, i don't want it to sleep. It's compiling my code) if i close the lid, laptop will do nothing. This works as expected, but actually if i have my laptop connected to power source in the office it will be good to lock it if i close a lid. So no one can just open the lid and see my unlocked desktop. I searched google and it says thet correct use case is to manually lock laptop via Win + L every time before lid is closed. This is ok, but not very secure - after all, i can forget Win + L. Is t any easy way (maybe some registry value or app) to configure windows laptop so it will lock on lid close even without sleep? Of course i can write app / powershell script for this task, but this is not suitable for non-programmers end users.

Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90 | Next Page >