Search Results

Search found 2177 results on 88 pages for 'wifi'.

Page 83/88 | < Previous Page | 79 80 81 82 83 84 85 86 87 88  | Next Page >

• parsing ssid with iwconfig in c

  - by user1781595

  I am about building a bar for DWM (ubuntu linux), showing wifi details such as the ssid. Thats my code: #include <stdio.h> #include <stdlib.h> int main( int argc, char *argv[] ) { FILE *fp; int status; char path[1035]; /* Open the command for reading. */ fp = popen("iwconfig", "r"); if (fp == NULL) { printf("Failed to run command\n" ); exit; } char s[500]; /* Read the output a line at a time - output it. */ while (fgets(path, sizeof(path)-1, fp) != NULL) { sprintf(s,"%s%s",s, path); } //printf("%s",s); /* close */ pclose(fp); char delimiter[1] = "s"; char *ptr; ptr = strtok(s, delimiter); printf("SSID: %s\n", ptr); return 0; } i am getting overflowerrors and dont know what to do. I dont think, thats a good way to get the ssid either... :/ Suggestions?

  Read the article

• selective UnknownHostException

  - by Stephan

  Hi everybody! I am getting said Exception in my program, but only in certain cases. First of all, I have the internet permission set:<uses-permission android:name="android.permission.INTERNET" />, and I tried the two method of this and this thread (they don't work in my case). The scenario is the following: I send a GET request to a rest service (e.g. http://my.web.site/request.php?attr=blah) and I do get a correct xml back. Now, in this xml there are some resources described, one of which is an url to an image (e.g http://my.web.site/images/img.jpg). Here it's where it fails! Here I consistently receive a UnknownHostException. I find it weird, since it's the same domain and everything. Accessing the img url from browser works (both from the emulator browser and pc browser). I tried from a device too but it doesn't get the image anyway. Any idea on why this weird behavior? EDIT: all my tests were on emulator and device, but connected to a wifi network. I tried also using the internet connection of my provider on the phone (i.e. bypassing home network), and still the behavior is the same... I found this bug which I assume is the source of this problem, but still no solution (after more than 1.5years). Any ideas?

  Read the article

• JNI Method not found

  - by Select Call

  I have been receiving this error for my JNI code while I tried find the method ,using GetMethodID, my Java method is in an Interface. Here is my interface public interface printReader { public printImg readerPrint(String selectedName) throws Exception; } Native code WprintImgIMPL.h class WprintImgIMPL: public IWprintReader { public: WprintImgIMPL(JNIEnv *env, jobject obj); ~WprintImgIMPL(void); virtual WprintImg readerPrint(char* readerName) ; ..... ..... private: JNIEnv *m_Env; jobject m_jObj; } WprintImgIMPL.cpp WprintImg WprintImgIMPL::readerPrint(char* readerName) { jclass cls = m_Env->GetObjectClass (m_jObj); jmethodID mid = m_Env->GetMethodID (cls, "readerPrint", "(Ljava/lang/String;)Lcom/site/name/printImg;"); ....... ....... } Java code public class printReaderIMPL implements printReader { static final String DEBUG_TAG = ""; android.net.wifi.WifiManager.MulticastLock lock; Context _context; public printReaderIMPL (Context context) { _context = context; } @Override public printImg readerPrint(String selectedName) throws Exception { Log.e(DEBUG_TAG, "readerPrint"); } } Constructor/destructor WprintImgIMPL(JNIEnv *env, jobject obj){ m_Env = env; m_jobj = env->NewGlobalRef(obj); } ~WprintImgIMPL(void) { m_Env->DeleteGlobalRef(m_jobj); } Error: GetMethodID: method not found: Lcom/site/name/NativeCode;.printImg:(Ljava/lang/String;)Lcom/site/name/printImg; Signature are checked twice , after failure I generated again using Javap tool . Thank you if you can input /comment and help in fixing this bug.

  Read the article

• Why Does Wireless Gear Degrade Over Time?

  - by bahamat

  I saw this originally posted on slashdot, but their comment format is not conducive to actually getting a correct answer. Having directly experienced this phenomenon myself, I'm now asking here where I think I can actually get an educated answer. Here's the original question verbatim: Lately I have replaced several home wireless routers because the signal strength has been found to be degraded. These devices, when new (2+ years ago) would cover an entire house. Over the years, the strength seems to decrease to a point where it might only cover one or two rooms. Of the three that I have replaced for friends, I have not found a common brand, age, etc. It just seems that after time, the signal strength decreases. I know that routers are cheap and easy to replace but I'm curious what actually causes this. I would have assumed that the components would either work or not work; we would either have a full signal or have no signal. I am not an electrical engineer and I can't find the answer online so I'm reaching out to you. Can someone explain how a transmitter can slowly go bad? Common (incorrect, but repeated) answers from slashdot include: Back then your neighbors didn't have wifi, now they do. They drowning you out. I don't think this is likely because replacing the access point with a new one and using the same frequencies solves the problem. Older devices had low transmit power. Crank that baby. As mentioned by a FreeBSD wireless developer this violates regulations and can physically damage the equipment. It was also mentioned that higher power in one direction is not necessarily reciprocated. This shows higher bars, but not necessarily a better connection. Manufacturers make cheap crap designed to wear out. This one actually may be legitimate although it is overly broad. What specifically causes damage over time? Heat? Excessive power? So can anyone provide an informed answer on this? Is there any way to fix these older access points?

  Read the article

• iPhone 3.1 Black Screen

  - by churnd

  Since I've updated my 3G iPhone to 3.1, it will become unresponsive after ~4-5 hours. It looks like it's off, but it's not. None of the buttons do anything that I can see. The only way I can get a screen back is to do a hard reset (Power + Home). Has anyone else had this problem? What can I do to fix it? I've had it 3 happen 3 times already. Very annoying. Apparently, the Discussions forum on Apple.com also shows lots of people are having the same problem. One guy said he did a restore and that fixed it for him, which I haven't tried yet because many others also tried that and it didn't help. A few others have said turning off WIFI fixes it for them, so I'm going to try that today. Another thing I've noticed is that now, when I plug in my iPhone to my Macbook Pro, iTunes 9 does not launch. It used to before the update. ** Further update and possible solution ** I left my iPhone plugged into my Macbook Pro yesterday while at work, and didn't use it much throughout the day. I noticed it didn't lock up once. I suspect this was because it was connected to a power source. I continued to use my iPhone with no problem yesterday and today. Still no lockups as of now. I personally think this was Spotlight and/or Genius "doing it's thing" from a new install. Kinda like an OS upgrade on your Mac... Spotlight has to rebuild itself and those first couple of hours can be kinda sluggish. This would be even more so on the iPhone where processing power is limited, and I'm sure the processor is clocked down a bit while on battery power, which would further amplify the problem. Again, just my guess. My iPhone is working fine now. ** Final Solution ** Update to 3.1.2. Problem solved.

  Read the article

• How do I protect a low budget network from rogue DHCP servers?

  - by Kenned

  I am helping a friend manage a shared internet connection in an apartment buildling with 80 apartments - 8 stairways with 10 apartments in each. The network is laid out with the internet router at one end of the building, connected to a cheap non-managed 16 port switch in the first stairway where the first 10 apartments are also connected. One port is connected to another 16 port cheapo switch in the next stairway, where those 10 apartments are connected, and so forth. Sort of a daisy chain of switches, with 10 apartments as spokes on each "daisy". The building is a U-shape, approximately 50 x 50 meters, 20 meters high - so from the router to the farthest apartment it’s probably around 200 meters including up-and-down stairways. We have a fair bit of problems with people hooking up wifi-routers the wrong way, creating rogue DHCP servers which interrupt large groups of the users and we wish to solve this problem by making the network smarter (instead of doing a physical unplugging binary search). With my limited networking skills, I see two ways - DHCP-snooping or splitting the entire network into separate VLANS for each apartment. Separate VLANS gives each apartment their own private connection to the router, while DHCP snooping will still allow LAN gaming and file sharing. Will DHCP snooping work with this kind of network topology, or does that rely on the network being in a proper hub-and-spoke-configuration? I am not sure if there are different levels of DHCP snooping - say like expensive Cisco switches will do anything, but inexpensive ones like TP-Link, D-Link or Netgear will only do it in certain topologies? And will basic VLAN support be good enough for this topology? I guess even cheap managed switches can tag traffic from each port with it’s own VLAN tag, but when the next switch in the daisy chain receives the packet on it’s “downlink” port, wouldn’t it strip or replace the VLAN tag with it’s own trunk-tag (or whatever the name is for the backbone traffic). Money is tight, and I don’t think we can afford professional grade Cisco (I have been campaigning for this for years), so I’d love some advice on which solution has the best support on low-end network equipment and if there are some specific models that are recommended? For instance low-end HP switches or even budget brands like TP-Link, D-Link etc. If I have overlooked another way to solve this problem it is due to my lack of knowledge. :)

  Read the article

• What "pieces" are needed in order to set up a cluster of physical servers?

  - by Chris Dutrow

  Background: Currently, we use Rackspace cloud servers. We have no intention to stop using them, but would like to look into setting up a cluster of physical servers (probably desktop computers in the $400 range with 8gb memory each) to offset some of our load and work as a secondary, more powerful, less reliable system. To put things in perspective, we can buy comparable desktop computers for the same price as we pay in one month to rent them on Rackspace Cloud. I understand that this is generally a dumb idea. However, in this particular instance, the server cluster is needed for its computation power. It is not mission-critical, it does not host a consumer-facing website, and if it goes down for a day or two, its not really a problem. Currently, we have access to business class verizon fios. If I understand correctly, we can get at least 25 dedicated IP addresses with this service, this should be enough. Requirements: Each server runs Linux Centos 6.3 Some of the servers run Python and execute processes from a task queue (Redis or RabbitMQ) Some of the servers are capable of serving static files and Python driven REST APIs Some of the servers host a Cassandra database cluster One or more of the servers are a Redis database servers One or more of the servers are PostgreSQL servers Questions: What kind of router or switch is needed? We would like the computers to be able to communicate effectively with each other via internal IP addresses. This is especially important for communicating with servers hosting Redis that need to be able to respond to requests very quickly. Are there special switches or routers that need to be used to connect the servers together? Are Desktop computers ok for this? We have found that we are mostly RAM-bottle necked, I understand that some servers have highly superior CPUs, but I'm not sure we need CPU power as much as we need RAM, which is cheap in Desktop computers. Will we have problems with the WIFI cards in the desktops or any other unexpected hardware limitation? What tools should be used to "image" the servers. For example, when we get an installation right for a Redis server or Cassandra node, are there tools that come with Linux Centos 6.3 to image the server to a USB drive or something like that? Or do we need to use some other software for this? What other things are we missing that we should be concerned about? Thanks so much!

  Read the article

• Constructing radiotap header and ieee80211 header structures for packet injection

  - by hektor

  I am trying to communicate between two laptop machines using Wifi. The structure of the radiotap header and ieee80211 header I am using is: struct ieee80211_radiotap_header { unsigned char it_version; uint16_t it_len; uint32_t it_present; }; /* Structure for 80211 header */ struct ieee80211_hdr_3addr { uint16_t frame_ctl[2]; uint16_t duration_id; unsigned char addr1[ETH_ALEN]; unsigned char addr2[ETH_ALEN]; unsigned char addr3[ETH_ALEN]; uint16_t seq_ctl; }; struct packet { struct ieee80211_radiotap_header rtap_header; struct ieee80211_hdr_3addr iee802_header; unsigned char payload[30]; }; /* In main program */ struct packet mypacket; struct ieee80211_radiotap_header ratap_header; struct ieee80211_hdr_3addr iee802_header; unsigned char addr1[ETH_ALEN] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}; /* broadcast address */ unsigned char addr2[ETH_ALEN] = {0x28,0xcf,0xda,0xde,0xd3,0xcc}; /* mac address of network card */ unsigned char addr3[ETH_ALEN] = {0xd8,0xc7,0xc8,0xd7,0x9f,0x21}; /* mac address of access point i am trying to connect to */ /* Radio tap header data */ ratap_header.it_version = 0x00; ratap_header.it_len = 0x07; ratap_header.it_present = (1 << IEEE80211_RADIOTAP_RATE); mypacket.rtap_header = ratap_header; /* ieee80211 header data */ iee802_header.frame_ctl[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON; iee802_header.frame_ctl[1] =IEEE80211_FC1_DIR_NODS; strcpy(iee802_header.addr1,addr1); strcpy(iee802_header.addr2,addr2); strcpy(iee802_header.addr3,addr3); iee802_header.seq_ctl = 0x1086; mypacket.iee802_header=iee802_header; /* Payload */ unsigned char payload[PACKET_LENGTH]="temp"; strcpy(mypacket.payload , payload); I am able to receive the packets when I test the transmission and reception on the same laptop. However I am not able to receive the packet transmitted on a different laptop. Wireshark does not show the packet as well. Can anyone point out the mistake I am making?

  Read the article

• Optimal setup for ASUS P6X58D Premium BIOS (no OC)?

  - by rumtscho

  Normally, I'd trust the mainboard manufacturer to choose the best options as defaults. But I had trouble with the board, because even with Quick Boot enabled, it booted twice as slowly as a Pentium 4 Celeron. Then I changed lots of options at once (most of them weren't explained in the manual, just mentioned with a single sentence) and the boot time is only marginally worse than the Pentium 4 (54 sec against 46 sec from button to pw entering screen). Now I don't know if I have turned something off which should have stayed on. I guess I even won't be able to boot from a CD now, because even though it is present in the boot sequence, I took off a timeout I think it needs to check whether there is a disk in the drive. The second reason is that I don't have an internal HDD, only a SSD. I forgot my sources blush but I am under the impression that today's BIOS and OS options are geared toward booting from a HDD, which is often less than optimal when one boots from a SSD, especially when there are functions which cause avoidable writing cycles, as a SSD wears out after too many writing cycles. Most of the things I've read concern the OS, but there are some BIOS-relevant options too. I am especially confused about the disk mode. The board supports AHCI, IDE-simulation and RAID, but of the different articles I've read, there is a proponent for each and no clear arguments for any. So can one tell me which options are important in general and which are important for a SSD-only system? I don't want to overclock the CPU, so you don't have to say anything about this (yes I know the board is meant for OC:)). I am thinking of overclocking the RAM, since they sold me 1600er heatsinked modules which are running at 1066 now, but I'm not sure yet about that. The rest of the system: i7-930, Intel X25-m G2, 6 GB RAM, GTS 250, some no-name Blue-ray ROM. 2 external HDDs over USB 2.0. Lots of other USB-connected hardware (12 devices I think), no SATA 3 drives (will disabling the controller have an impact on performance?), no LAN, only WiFi. Lucid Lynx 64 bit, no dual boot, no virtual installations. The main uses of the system are: managing and playing/showing all the media stored on the external disks, lots of image manipulation, some video editing, a bit of (non-demanding) gaming, rarely development. Lots of Internet surfing too, but this shouldn't have much impact on performance.

  Read the article

• mobile broadband recommendations for Lenovo T500

  - by Justin Grant

  I use a Lenovo T500 primarily in and around San Francisco, although I do some travel in the US on business and occasionally to Europe/Asia. I'm looking for a good mobile broadband option for my T500. I am admittedly baffled by the various mobile-broadband choices (3G vs. 4G, WiMax vs. LTE vs. MIMO vs. ..., etc.). My priorities are (in this order): Compatible with Lenovo T500 and Windows 7. I realize only the AT&T accessory card is listed on Lenovo's site, but I've also heard that other cards will work in my T500 too, like the WiMax/Wifi combo card-- so I'm interested in what actually works, not necessarily only what Lenovo is promoting. Reliable coverage in US large cities, especially the SF Bay Area. my IPhone has lousy coverage in many spots, so I'd be nervous about an AT&T 3G option unless the problem is with the IPhone and not AT&T's network. I'm OK with non-great coverage outside major US cities, since I don't do much travel in those areas. Speed. faster is better. Internal card. I'd slightly prefer something I could install inside my T500 instead of a dongle on the side that might break off, although this is my lowest priority so it's not a big deal. Price. I don't want to pay over $100/month. I've tried lots of Googling and haven't come up with clear answers. I've seen lots of general overviews without recommendations, and lots of passionate opinions which don't feel objective (and don't help me understand compatibility with my hardware & geography). Can you recommend a good, objective guide online, ideally for Lenovo although general guide is OK too, which can help me figure out which option is the best one for me? I'd also be interested in your own personal experiences of using mobile broadband using a Lenovo T500. I'll accept the answer which gets me closest to making a decision.

  Read the article

• Wireless 802.11x Disconnects

  - by BillP3rd

  I've looked at (and read) all of the similar questions and none of them get exactly to the issue I'm having at home. I have an 802.11g access point (two, actually, with different SSIDs and on different channels). One is an Airlink AR525W. The other is a Linksys WRT54G v.2. The issue is that at random times, my laptop will lose its wireless connection. This occurs regardless of which access point I'm connected to. When I lose the connection, the affected AP no longer appears in the list of available APs. Also, it doesn't have anything to do with walls or distance. It can happen within 30' and when my laptop is literally within line-of-sight. When it loses the signal, it can take from 10 to 30 minutes to reconnect and it always will without intervention. I've done all the “standard” things to troubleshoot the problem and it has improved. For example, I surveyed other access points in my vicinity and have selected a different channel for each of my APs that no one else nearby is using. Both APs are configured WPA2/AES. I'm down to wondering [Note: This is not a shopping question. I'm not buying a new AP] if the fact that I didn't drop two bills on my APs and instead opted for more modest solutions has anything to do with it? I've oft wondered why anyone would go for the high-end AP when they didn't have to. Also, I am aware of DD-WRT and have chosen not to go there because only one of my APs is supported. Oh, and one final thing. It an HP x64 laptop running Windows 7 Ultimate. The wireless interface is an Atheros AR9285 802.11b/g/n WiFi Adapter. All the latest drivers and service packs have been applied. It did the same thing with my old laptop (a Lenovo) so I don't the problem is in the laptop. It's really annoying when this happens and suggestions of things I haven't thought of or may have overlooked (No, really. As unlikely as it is, I admit that I may have overlooked something :-)) are appreciated.

  Read the article

• Avoid read-write access to bad sectors on HDD to continue working on the HDD

  - by goldenmean

  I have a HP Pavilion dv6446 notebook. It had Windows Vista Home premium. After 4.5+ years of usage, just recently it started malfunctioning. While working fine, its screen goes white or sometimes some thin black lines horizontally. Laptop freezes. Hard reboot works. Again it works for some 2 hrs or so, same error. To diagnose I did run the Memory and Hard disk check which is present in the Bios Setup. Memory test passed. Hard disk test returned an error saying something like - "Replace the hard disk". Bad.. Some sectors or platters have gone bad on the disk. (I confirmed this later by further tests mentioned below) Then I tried installing a Ubuntu 11.10. It listed 3 partitions /dev/sda1, sda2, sda2. It again gave error and could not install grub loader on /dev/sda1. Bad sectors. Then redid the Ubuntu installation, this time asked to to install the Ubuntu on /dev/sda3. and kept /dev/sda1 for /home. Installed fine, and works fine as well. Due to unavailability of WiFi/ Ethernet driver for that adapters under Ubuntu( at least I could not configure them and get the networking working at all), I decided to go back to reinstall windows Vista. It did install fine. I did not have to format one data partition which has my data. I just formatted one partition which installed Windows So in effect HDD has not undergone a full format here. Worked ok for 1 day. But same white screen and freeze happened. Looks like while it is in use, it accesses the bad sectors for storing some data and that's when it bombs. I am inclined to think HDD has not failed fully or crashed but has developed bad sectors. Else if it was a HDD crash, it would have refused to boot at all let alone install on it. Questions: Is there any HDD test check under windows or any such tools windows/linux based ewhere which can identify the bad sectors of the HDD and 'lock/isolate' them from further read-write access of any kind. If not what are my options, if any to salvage this laptop HDD without replacing it. EDIT: Would the Disk Error checking tool under windows help in any way?

  Read the article

• PCI-DSS compliance for business with only swipe terminals [migrated]

  - by rowatt

  I support the IT infrastructure for a small retail business which is now required to undergo a PCI-DSS assessment. The payment service and terminal provider (Streamline) has asked that we use Trustwave to do the PCI-DSS certification. The problem I face is that if I answer all questions and follow Trustwave's requirements to the letter, we will have to invest significantly in networking equipment to segment LANs and /or do internal vulnerability scanning, while at the same time Streamline assures me that the terminals we have (Verifone VX670-B and MagIC3 X-8) are secure, don't store any credit card information and are PCI-DSS compliant so by implication we don't need to take any action to ensure their network security. I'm looking for any suggestions as to how we can most easily meet the networking requirements for PCI-DSS. Some background on our current network setup: single wired LAN, also with WiFi turned on (though if this creates any PCI-DSS complexities we can turn it off). single Netgear ADSL router. This is the only firewall we have in place, and the firewall is out the box configuration (i.e. no DMZ, SNMP etc). Passwords have been changed though :-) a few windows PCs and 2 windows based tills, none of which ever see any credit card information at all. two swipe terminals. Until a few months ago (before we were told we had to be PCI-DSS certified) these terminals did auth/capture over the phone. Streamline suggested we moved to their IP Broadband service, which instead uses an SSL encrypted channel over the internet to do auth/capture, so we now use that service. We don't do any ecommerce or receive payments over the internet. All transactions are either cardholder present, or MOTO with details given over phone and typed direct into terminal. We're based in the UK. As I currently understand it we have three options in order to get PCI-DSS certification. segment our network so the POS terminals are isolated from all PCs, and set up internal vulnerability scanning on that network. don't segment the network, and have to do more internal scanning and have more onerous management of PCs than I think we need (for example, though the tills are Windows based, they are fully managed so I have no control over software update policies, anti virus etc). All PCs have anti virus (MSE) and windows updates automatically applied, but we don't have any centralised go back to auth/capture over phone lines. I can't imagine we are the first merchant to be in this situation. I'm looking for any recommendations a simple, cost effective way to be PCI-DSS compliant - either by doing 1 or 2 above with (hopefully) simple and inexpensive equipment/software, or any other ways if there's a better way to do this. Or... should we just go back to the digital stone age and do auth/capture over the phone, which means we don't need to do anything on our network to be PCI-DSS certified?

  Read the article

• Airport Express chokes Wi-Fi for a few seconds, several times per hour. Any idea why?

  - by user13727

  I'm using a MacBookPro connected to an AiportExpress' Wi-FI network. Every once in a while, the Wi-Fi will choke up and either drop some packets, or lag horribly for several seconds. I'm losing hair over this because every time I chat on Skype, the call hangs randomly due to this problem. Any idea what's wrong? Some more details: two networks are set up: 2.4Ghz and 5Ghz, and the issue happens on both the network uses WPA2 Personal for security the Airport is in the same room with my computer the Airport is fairly new, bought this summer, model number off the back: A1392 tried connecting to a neighbours wifi to see if it's a problem with my computer, or interference. It's not, it doesn't happen on their network. tried resetting it several times tried changing channels manually Ping results are below, so you can see what I'm talking about. EDIT: 10.0.1.1 is the Airport's IP 64 bytes from 10.0.1.1: icmp_seq=1795 ttl=255 time=0.813 ms 64 bytes from 10.0.1.1: icmp_seq=1796 ttl=255 time=3.335 ms 64 bytes from 10.0.1.1: icmp_seq=1797 ttl=255 time=3.403 ms 64 bytes from 10.0.1.1: icmp_seq=1798 ttl=255 time=3.414 ms 64 bytes from 10.0.1.1: icmp_seq=1799 ttl=255 time=3.227 ms 64 bytes from 10.0.1.1: icmp_seq=1800 ttl=255 time=3.274 ms 64 bytes from 10.0.1.1: icmp_seq=1801 ttl=255 time=3.253 ms 64 bytes from 10.0.1.1: icmp_seq=1802 ttl=255 time=3.292 ms >>>> choke starts <<< 64 bytes from 10.0.1.1: icmp_seq=1803 ttl=255 time=53.977 ms 64 bytes from 10.0.1.1: icmp_seq=1804 ttl=255 time=35.049 ms 64 bytes from 10.0.1.1: icmp_seq=1805 ttl=255 time=19.820 ms >>>> choke ends <<< 64 bytes from 10.0.1.1: icmp_seq=1806 ttl=255 time=0.716 ms 64 bytes from 10.0.1.1: icmp_seq=1807 ttl=255 time=0.705 ms 64 bytes from 10.0.1.1: icmp_seq=1808 ttl=255 time=0.919 ms 64 bytes from 10.0.1.1: icmp_seq=1809 ttl=255 time=0.659 ms 64 bytes from 10.0.1.1: icmp_seq=1810 ttl=255 time=0.877 ms 64 bytes from 10.0.1.1: icmp_seq=1811 ttl=255 time=0.679 ms 64 bytes from 10.0.1.1: icmp_seq=1812 ttl=255 time=0.854 ms 64 bytes from 10.0.1.1: icmp_seq=1813 ttl=255 time=0.644 ms 64 bytes from 10.0.1.1: icmp_seq=1814 ttl=255 time=3.779 ms ... time passes .. 64 bytes from 10.0.1.1: icmp_seq=1599 ttl=255 time=0.674 ms 64 bytes from 10.0.1.1: icmp_seq=1600 ttl=255 time=0.930 ms 64 bytes from 10.0.1.1: icmp_seq=1601 ttl=255 time=0.665 ms 64 bytes from 10.0.1.1: icmp_seq=1602 ttl=255 time=1.085 ms Request timeout for icmp_seq 1603 Request timeout for icmp_seq 1604 64 bytes from 10.0.1.1: icmp_seq=1605 ttl=255 time=104.969 ms 64 bytes from 10.0.1.1: icmp_seq=1606 ttl=255 time=11.521 ms 64 bytes from 10.0.1.1: icmp_seq=1607 ttl=255 time=0.926 ms 64 bytes from 10.0.1.1: icmp_seq=1608 ttl=255 time=0.993 ms 64 bytes from 10.0.1.1: icmp_seq=1609 ttl=255 time=0.745 ms And the Signal-Noise ratio:

  Read the article

• Is it possible to change an "Unidentified Network" into a "Home" or "Work" network on Windows 7

  - by Rhys

  I have a problem with Windows 7 RC (7100). I frequently use a crossover network cable on WinXP with static IP addresses to connect to various industrial devices (e.g. robots, pumps, valves or even other Windows PCs) that have Ethernet network ports. When I do this on Windows 7, the network connection is classed as an "Unidentified Network" in Networks and Sharing Center and the public firewall profile is enforced by Windows. I do not want to change the public profile and would prefer to use the Home or Work profile instead. For other networks like Home and Work I'm able to click on them and change the classification. This is not available for unidentified networks. My questions are these:- Is there a way to manual override the "Unidentified Network" classification? What tests are performed on the network that fail, therefore classifying it as an "Unidentified Network" By googling (hitting mainly vista issues) it seems that you need to ensure that the default gateway is not 0.0.0.0. I've done this. I've also tried to remove IPv6 but this does not seem possible on Windows 7. UPDATE For those still having problems here is the answer to my issue and the possible reasons why:- Win7 keeps a list of the networks you visit by (I am assuming, but don’t know for sure) the MACID of the device pointed to by the Default Gateway. The default gateway is usually the constant device in a network (i.e. the NAT or router) so can be used to uniquely identify one network from another. The default gateway in the IPv4 properties panel must therefore point to an actual endpoint so windows can then keep track of it. If there is a device at the end of the Default Gateway windows will identify it and track it remembering its settings. The ways you can therefore fool Win7 is to either point the default gateway to your own IP address, or the IP address of the target device you’re communicating with. This will have the side effect of expecting that target device to start routing packets for IP destinations that are outside your subnet. So some applications on Win7 will try to communicate with the internet, these will be passed on to the default gateway (either back you the same IP address or a target device that is not a router) and thus will eventually timeout because neither can route packets. Which you can usually live with. This gets slightly complicated when you mix a this type of connection with a real connection to the internet via WIFI. The wired network card usually has priority when routing because of the “interface metric” so some applications might not connect correctly.

  Read the article

• Alienware m15x (older model) BSOD investigation

  - by Crishu

  A frined of mine asked me to help him with an Alienware m15x laptop that had a little service history. It was bought in june 2008, serviced in january 2009 for a random fps drop problem, Alienware returned it saying nothing was wrong. The laptop still had hiccups, but after juggling a few drivers and settings, the fps drops weren't as noticeable. Eventually it died in Sept. 2009. It would not boot up locking itself on a white/gray screen. (i think it was overheating .. clocking in 100 degrees Celsius). So back to Alienware it went. They replaced the GPU and all was fine. Up until these blue screens started showing up. One other thing that was updated was the HDD and a Windows 7 reinstall, in August. From then on it seems to have started its BSOD. Could this be the culprit? Why? 0_o The original Windows was Vista but it was upgraded with a digital download/purchase of Windows 7 Home Premium and activated after installing windows. No errors on the old HDD, just on the latest installation. LE:Due note that now the old HDD is used to see if issues re-occur. So please, I am in need of someone who can interpret these windows dump files: Minidump I may have come to some conflicting conclusions. So if someone can clarify each dump/date and the probable cause/error it had; and a final conclusion or solution, we would be very grateful. Also please consult report for other system info I omitted: same link,code: XRWIVLWG If I missed something or if you have any other questions I'll be happy to answer them. Thank you. Good day. Processor: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz Network Adapter Properties: Broadcom NetLink (TM) Gigabit Ethernet Intel(R) Wireless WiFi Link 4965AGN Video Adapter Properties: Driver Description NVIDIA GeForce 8800M GTX Driver Date 19.08.2009 Driver Version 8.16.11.8681 Driver Provider NVIDIA INF File oem19.inf Hardware ID PCI\VEN_10DE&DEV_060C&SUBSYS_0770152D&REV_A2 Location Information @system32\DRIVERS\pci.sys,#65536;PCI bus %1, device %2, function %3;(1,0,0) PCI Device NVIDIA GeForce 8800M GTX [NoDB] BIOS String Version 62.92.34.0.8 Installed Drivers nvd3dum (8.16.11.8681), nvwgf2um, nvwgf2um Hard Dik Drive: Model ID ST9120823ASG (**older one 120gb**) Model ID WD32000BEKT (new 320gb with fresh OS)

  Read the article

• how to use iptables to block the IP of device connected to openwrt router

  - by scola

  I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

  Read the article

• Computer suddenly dies; screen displays weird flickering lines, then restarts

  - by Imray

  I've been having this terrible problem for a little while and just managed to get a picture of 'dead screen' for the first time and I am posting it to seek help. Randomly, at irregular intervals (typically once a week), while working on something (it's been different things every time) my computer will just suddenly go dead - the screen turns to exactly the picture below (the lines flicker a little bit), it hangs there for a few seconds and then restarts. Obviously this is extremely frustrating and I want to try to stop it. I've searched numerous postings with similar keywords but nothing exactly the same as mine. Does anyone have any idea what might be the cause of this? I would post all my system settings and installed programs but the list is long and I don't know how much relevance each item would be. If you'd like to know something specific, please comment and I'll let you know whatever you need. SPECS C:\Users\Imray>systeminfo Host Name: Imray OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7600 N/A Build 7600 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Workstation OS Build Type: Multiprocessor Free Registered Owner: Imray - Owner Registered Organization: Product ID: 00371-152-9333854-85895 Original Install Date: 06/09/1999, 5:45:21 PM System Boot Time: 22/03/2013, 8:58:18 AM System Manufacturer: Gateway System Model: DX4840 System Type: x64-based PC Processor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 37 Stepping 2 GenuineIntel ~3201 Mhz BIOS Version: American Megatrends Inc. P01-A3 , 17/05/2010 Windows Directory: C:\Windows System Directory: C:\Windows\system32 Boot Device: \Device\HarddiskVolume2 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (UTC-05:00) Eastern Time (US & Canada) Total Physical Memory: 6,135 MB Available Physical Memory: 3,632 MB Virtual Memory: Max Size: 12,268 MB Virtual Memory: Available: 8,114 MB Virtual Memory: In Use: 4,154 MB Page File Location(s): C:\pagefile.sys Domain: WORKGROUP Logon Server: \\Imray-OWNER Hotfix(s): 4 Hotfix(s) Installed. [01]: KB971033 [02]: KB958559 [03]: KB977206 [04]: KB981889 Network Card(s): 2 NIC(s) Installed. [01]: 802.11n Wireless PCI Express Card LAN Adapter Connection Name: Wireless Network Connection DHCP Enabled: Yes DHCP Server: 192.168.2.1 IP address(es) [01]: 192.168.2.13 [02]: fe80::1df1:5399:6890:91f6 [02]: Microsoft Virtual WiFi Miniport Adapter Connection Name: Wireless Network Connection 2 DHCP Enabled: Yes DHCP Server: N/A IP address(es) Graphics Card Specs Name ATI Radeon HD 5570 PNP Device ID PCI\VEN_1002&DEV_68D9&SUBSYS_E142174B&REV_00\4&18A4B35E&0&0008 Adapter Type ATI display adapter (0x68D9), ATI Technologies Inc. compatible Adapter Description ATI Radeon HD 5570 Adapter RAM 1.00 GB (1,073,741,824 bytes) Installed Drivers atiu9p64 aticfx64 aticfx64 atiu9pag aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64 Driver Version 8.700.0.0 INF File oem1.inf (ati2mtag_Evergreen section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1920 x 1080 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xDFFFFFFF Memory Address 0xFBDE0000-0xFBDFFFFF I/O Port 0x0000D000-0x0000DFFF IRQ Channel IRQ 4294967293 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6095, 181.00 KB (185,344 bytes), 06/09/1999 5:59 PM)

  Read the article

• Cannot access boot menu with compaq 8510p

  - by pinouchon

  I have a problem with my HP compaq 8510p laptop: when I start it, the fan starts and the power light is on, but the screen displays nothing. When I insert a bootable hard drive, it activates the hard drive light (meaning that the CD is recognized) but it stops after a few seconds. Same thing with any hard drive: the drive is recognized but does not boot. What I've tried so far: Changing the hard drive or booting with no hard drive (same problem) Plugging anoher display via VGA : no display on the other screen Inserting a windows-7 CD (same problem) Booting only on battery, with battery and power cable, only with power cable (same problem) So it looks like something is preventing the laptop from booting and displaying the boot menu. Do you have experienced something similar with a laptop ? What could be wrong ? The laptop is out of warranty. The system used to be windows-7 x64. Edit: I went to the help desk of my university. A guy took a look (he also tried to plug an external screen) and said that the computer is dead: on the HP laptops eventually the GPU card dies and so does the motherboard because they are linked. He saw this many times, and even if I can fix the problem, the laptop would crash again after a while. Do you have similar experience with HP laptops ? (mine is 4 years old) Edit 2: Believe it or not, my laptop is magically working again. I have no clue about what is going on. Now it is like starting and old car: when you turn it on you secretly hope it will actually start... With that said, I expect my laptop to break again in the near future (its an HP after all) and I will accept an answer or add my own accordingly. Edit 3: As expected, the laptop is down again. This time, sometimes when I power it up, it shuts down automatically after 3 seconds, sometimes not at all. In addition, when it does not shut down on its own, the power button does not work : the only way to shut it down is by unplugging the battery. As before, the screen is black, and only the power and battery lights are on. (the other ones: hard drive and wifi are off). I have tried to plug in another power plug, removing the battery and removing the hard drive without success. I might buy another laptop. I've brought the laptop to a repair shop. The problem is indeed that the graphic card is down. It will be replaced by a new one.

  Read the article

• Slow WLAN file transfer between server and tablet

  - by user266985

  My file server is running Ubuntu 12.04 and I'm sharing files from it over samba. It is connected via gigabit ethernet. My desktop, running Windows 8.1, is also connected via gigabit ethernet. I can transfer files between the two and completely saturate that gigabit pipe. However, I just got a Surface Pro 2, and I'm trying to stream HD movies from my server to the device over WiFi. For some reason, I can't break much past 1.5MB/s transferring files over the network. I've tried streaming through XBMC and a standard file copy; no difference. To add the confusion, if I connect to my guest network and then use my VPN server (installed on the router) to access the file server, I get around 3.2MB/s. I've been running diagnostics to determine the root and I think I've found it but I have no idea what is causing it or how to fix it. Router: Asus RT-N66U Surface Pro 2 Network Card: Marvell Avastar 350N (Driver 19/09/2013 v14.69.24044.150) InSSIDer: Link Score: 100 Co-Channels: 0 Overlapping: 0 5GHz Network Channel: 48+44 iperf File Server as Server; Surface Pro 2 as Client - TCP Performance: Acceptable ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.0.90 port 5001 connected with 192.168.0.56 port 57367 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 10.1 MBytes 84.7 Mbits/sec [ 4] 1.0- 2.0 sec 10.4 MBytes 87.6 Mbits/sec [ 4] 2.0- 3.0 sec 10.6 MBytes 88.8 Mbits/sec [ 4] 3.0- 4.0 sec 10.7 MBytes 89.5 Mbits/sec [ 4] 4.0- 5.0 sec 10.1 MBytes 84.4 Mbits/sec [ 4] 5.0- 6.0 sec 10.2 MBytes 85.8 Mbits/sec [ 4] 6.0- 7.0 sec 7.04 MBytes 59.1 Mbits/sec [ 4] 7.0- 8.0 sec 10.8 MBytes 90.2 Mbits/sec [ 4] 8.0- 9.0 sec 10.6 MBytes 89.1 Mbits/sec [ 4] 9.0-10.0 sec 8.62 MBytes 72.3 Mbits/sec [ 4] 0.0-10.0 sec 99.2 MBytes 83.1 Mbits/sec iperf Surface Pro 2 as Server, File Server as Client Performance: Poor ------------------------------------------------------------ Client connecting to 192.168.0.56, TCP port 5001 TCP window size: 22.9 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.0.90 port 40233 connected with 192.168.0.56 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 1.0- 2.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 2.0- 3.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 3.0- 4.0 sec 1.25 MBytes 10.5 Mbits/sec [ 3] 4.0- 5.0 sec 1.62 MBytes 13.6 Mbits/sec [ 3] 5.0- 6.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 6.0- 7.0 sec 1.38 MBytes 11.5 Mbits/sec [ 3] 7.0- 8.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 8.0- 9.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 9.0-10.0 sec 1.62 MBytes 13.6 Mbits/sec [ 3] 0.0-10.1 sec 15.0 MBytes 12.4 Mbits/sec For some reason, it gets capped and I haven't got a clue why. Any suggestions? Edit: My link speed is reported as 270Mbps by Windows. I'm less than two metres from the router with a clear line of sight.

  Read the article

• VLAN issues between linux kernels 2.6 / 3.3 in an ESX / Cisco environment

  - by David Griffith

  I shall attempt to explain an issue I have encountered - I have a VM running on esx 4.1 with an interface connected to VLAN800 via an access port on a cisco 3750. It runs linux - kernel 2.6.24, and has about 5 to 10 Mbit of chatter on 10.10.0.0/16 and various multicast addresses to look after. I needed to isolate certain devices from certain other devices on the network, with all of them having to talk to that one VM. No, the address space can't be separated, nor can the networks be easily vlan'd apart. The software on the VM listens to one interface only. Private vlans appear to be the way to go. So as a test, I built a bridge on the VM that globs together the vlans as needed. All good, everything works as expected. But occasionally (sigh) there's some latency that trips up a couple of profinet devices on the network because, you know, you're not really supposed to trunk real-time protocols around the place willy-nilly. I shift it to our test/backup server - works nicely, but I don't want it to be running on the test server as we muck around with that a lot. So I says to myself, "I'll put it on a new VM for testing and tweaking." I download a small linux distro with kernel 3.3, and install as a new VM with a the vlans as separate interfaces for testing. I power up the testing VM - ok. I bring up all the separate interfaces - ok. I can ping the production VM, see all sorts of traffic going past with tshark, etc. I build a bridge and put the primary vlan on it - the production VM running 2.6 immediately loses its multicast traffic - Unicast is fine. (?) I shut down the bridge - still no multicast traffic (!?) I power-cycle the production VM(!?!?) - multicast traffic returns. I trunk everything into the testing VM and create vlan interfaces under linux instead - same result, as soon as I start the bridge.... no multicast on the production VM. Ok, so I take a break and leave things alone. I decide to play with a couple of ubiquiti bullet radios - I'm testing various firmware as a side project. I flash a radio with Open-wrt-12.09. I enable a trunk on a port on a cisco on our network so I can muck around with multiple vlans and SSIDs I power up the radio and connect - ok. I create a vlan interface from the trunk.... the same vlan as the production VM wayyyyy over there, three cisco routers away. Ok. I bridge the vlan interface to the wifi interface and immediately get a phone call. The production VM has (suprise!) lost its multicast traffic. Again, nothing comes back until I power-cycle the VM. What the hell is going on?

  Read the article

• Wrapping a point-to-point link

  - by user3712955

  I'm using a pair of IP radios (non-WiFi) to bridge my office engineering LAN (172.0.0.0/8) to a lab in another building. The radios work fine, but they expose a web management interface I'd like to hide, and they also generate traffic (ARP, STP, and more) that I need to keep off my (very, very clean) LAN segments. I have some ARM-Linux boards (similar to Beagle/Panda/RasPi) running Ubuntu, and I've put one at each end of the link, between the radio and the LAN. Each of the boards has 2 wired Ethernet interfaces, eth0 and eth1. The LAN segments are connected to eth0, and the radios are connected to eth1. I'd like to accomplish the following: Keep radio-originated traffic off my LAN segments! Hide all services provided by the radio (web, ssh, etc.) Transparently pass all traffic between the LAN segments (including things like ARP). The above also applies to the ARM-Linux boards: No stray traffic my LAN from them either! I'd like the system to look like a switch: LAN packets arriving at one eth0 appear at the other. And neither eth0 should have an IP address: The working system should behave like a CAT6 cable with some latency (instead of ARM boards and radios). Unfortunately, I'm confused about how to properly configure the ARM Ubuntu systems. What I'm guessing I need is a bridge on each board (br0?) and a VLAN (vlan0 or eth0.0?) to isolate the LAN traffic from everything else as it passes through the ARM boards and the radios. Then I need some kind of a firewall to block sending anything out eth0 that isn't from the other eth0 (via the VLAN). I've looked at the ip and ebtables commands (especially -t broute). While the concepts sorta-kinda make sense, I'm completely lost in the details. Edit: In the perverse case that a system on one of my LAN segments has the same IP address as one of the radios, or as eth1 on the ARM-Ubuntu boards, a VLAN won't work. Which I believe means I need to tunnel all traffic between the two eth0 interfaces to get that "like a wire" behavior. Help? Finally, I'd like to have a way to temporarily expose services on the ARM boards (ssh) and the radios (web) for maintenance purposes. Ideally, it would expose an IP address with ssh available on port 22. Once connected, I figure I'd start an X11 session and run a browser on the ARM board to access the radios. Or something. I could login via the console to enable/disable this, or perhaps could use a GPIO to trigger a script. I feel I've identified most of the pieces needed to make all this happen, but I have no idea how to combine them to make a working system. Thanks!

  Read the article

• Bluetooth DUN Tethering fails

  - by tacone

  I have an HTC Desire HD, with Android Froyo (2.2) and PDANet installed. I am using Ubuntu 10.10. I cannot tether it over Bluetooth either with Network Manager or BlueMan. (note, I installed Blueman only after failing with NetWork manager, and I even tried the last version from the PPA). With both my device is discovered, paired, setup. But connecting always fail. Network manager says it cannot get the details of my device Blueman says Connection Refused (111) Here are some relevant entries from syslog. Mar 11 22:13:00 tacone-macbook bluetoothd[2242]: Bluetooth deamon 4.69 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting SDP server Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting experimental netlink support Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Failed to find Bluetooth netlink family Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Failed to init netlink plugin Mar 11 22:13:00 tacone-macbook kernel: [ 158.284357] Bluetooth: L2CAP ver 2.14 Mar 11 22:13:00 tacone-macbook kernel: [ 158.284361] Bluetooth: L2CAP socket layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.446781] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Mar 11 22:13:00 tacone-macbook kernel: [ 158.446784] Bluetooth: BNEP filters: protocol multicast Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: HCI dev 0 registered Mar 11 22:13:00 tacone-macbook kernel: [ 158.569481] Bluetooth: SCO (Voice Link) ver 0.6 Mar 11 22:13:00 tacone-macbook kernel: [ 158.569484] Bluetooth: SCO socket layer initialized Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: HCI dev 0 up Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting security manager 0 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: ioctl(HCIUNBLOCKADDR): Invalid argument (22) Mar 11 22:13:00 tacone-macbook kernel: [ 158.818600] Bluetooth: RFCOMM TTY layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.818607] Bluetooth: RFCOMM socket layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.818610] Bluetooth: RFCOMM ver 1.11 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: probe failed with driver input-headset for device /org/bluez/2242/hci0/dev_F8_DB_7F_AF_6B_EE Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Adapter /org/bluez/2242/hci0 has been enabled Mar 11 22:13:00 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from ListDevices reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:13:00 tacone-macbook NetworkManager[1247]: <warn> bluez error getting adapter properties: Rejected send message, 1 matched rules; type="method_call", sender=":1.4" (uid=0 pid=1247 comm="NetworkManager) interface="org.bluez.Adapter" member="GetProperties" error name="(unset)" requested_reply=0 destination="org.bluez" (uid=0 pid=2242 comm="/usr/sbin/bluetoothd)) Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: return_link_keys (sba=00:23:6C:B5:03:6F, dba=00:23:6C:C0:F1:B0) Mar 11 22:13:00 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:02 tacone-macbook bluetoothd[2243]: Discovery session 0x2262d7c0 with :1.45 activated Mar 11 22:15:15 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:15 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:16 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:16 tacone-macbook bluetoothd[2243]: io_capa_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:17 tacone-macbook bluetoothd[2243]: io_capa_response (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:18 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: link_key_notify (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE, type=5) Mar 11 22:15:28 tacone-macbook kernel: [ 306.585725] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook kernel: [ 306.630757] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: Authentication requested Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:28 tacone-macbook kernel: [ 306.784829] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook kernel: [ 306.857861] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:29 tacone-macbook bluetoothd[2243]: probe failed with driver input-headset for device /org/bluez/2242/hci0/dev_F8_DB_7F_AF_6B_EE Mar 11 22:15:29 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:29 tacone-macbook pulseaudio[1757]: last message repeated 8 times Mar 11 22:15:29 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:30 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Mar 11 22:15:30 tacone-macbook modem-manager: (rfcomm0) opening serial device... Mar 11 22:15:30 tacone-macbook modem-manager: (rfcomm0): probe requested by plugin 'Generic' Mar 11 22:15:43 tacone-macbook modem-manager: (rfcomm0) closing serial device... Mar 11 22:15:43 tacone-macbook modem-manager: (rfcomm0) opening serial device... Mar 11 22:15:49 tacone-macbook modem-manager: (rfcomm0) closing serial device... Mar 11 22:16:15 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Mar 11 22:16:19 tacone-macbook kernel: [ 357.375108] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:16:24 tacone-macbook kernel: [ 362.169506] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook kernel: [ 362.215529] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:16:24 tacone-macbook kernel: [ 362.281559] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook kernel: [ 362.330588] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Any help ? PS: tethering via USB or WiFi is not an option, I need to do it over Bluetooth.

  Read the article

• CodePlex Daily Summary for Sunday, March 07, 2010

  CodePlex Daily Summary for Sunday, March 07, 2010New ProjectsAlgorithminator: Universal .NET algorithm visualizer, which helps you to illustrate any algorithm, written in any .NET language. Still in development.ALToolkit: Contains a set of handy .NET components/classes. Currently it contains: * A Numeric Text Box (an Extended NumericUpDown) * A Splash Screen base fo...Automaton Home: Automaton is a home automation software built with a n-Tier, MVVM pattern utilzing WCF, EF, WPF, Silverlight and XBAP.Developer Controls: Developer Controls contains various controls to help build applications that can script/write code.Dynamic Reference Manager: Dynamic Reference Manager is a set (more like a small group) of classes and attributes written in C# that allows any .NET program to reference othe...indiologic: Utilities of an IndioNeural Cryptography in F#: This project is my magistracy resulting work. It is intended to be an example of using neural networks in cryptography. Hashing functions are chose...Particle Filter Visualization: Particle Filter Visualization Program for the Intel Science and Engineering FairPólya: Efficient, immutable, polymorphic collections. .Net lacks them, we provide them*. * By we, we mean I; and by efficient, I mean hopefully so.project euler solutions from mhinze: mhinze project euler solutionsSilverlight 4 and WCF multi layer: Silverlight 4 and WCF multi layersqwarea: Project for a browser-based, minimalistic, massively multiplayer strategy game. Part of the "Génie logiciel et Cloud Computing" course of the ENS (...SuperSocket: SuperSocket, a socket application framework can build FTP/SMTP/POP server easilyToast (for ASP.NET MVC): Dynamic, developer & designer friendly content injection, compression and optimization for ASP.NET MVCNew ReleasesALToolkit: ALToolkit 1.0: Binary release of the libraries containing: NumericTextBox SplashScreen Based on the VB.NET code, but that doesn't really matter.Blacklist of Providers: 1.0-Milestone 1: Blacklist of Providers.Milestone 1In this development release implemented - Main interface (Work Item #5453) - Database (Work Item #5523)C# Linear Hash Table: Linear Hash Table b2: Now includes a default constructor, and will throw an exception if capacity is not set to a power of 2 or loadToMaintain is below 1.Composure: CassiniDev-Trunk-40745-VS2010.rc1.NET4: A simple port of the CassiniDev portable web server project for Visual Studio 2010 RC1 built against .NET 4.0. The WCF tests currently fail unless...Developer Controls: DevControls: These are the version 1.0 releases of these controls. Download the individually or all together (in a .zip file). More releases coming soon!Dynamic Reference Manager: DRM Alpha1: This is the first release. I'm calling it Alpha because I intend implementing other functions, but I do not intend changing the way current functio...ESB Toolkit Extensions: Tellago SOA ESB Extenstions v0.3: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...GKO Libraries: GKO Libraries 0.1 Alpha: 0.1 AlphaHome Access Plus+: v3.0.3.0: Version 3.0.3.0 Release Change Log: Added Announcement Box Removed script files that aren't needed Fixed & issue in directory path Stylesheet...Icarus Scene Engine: Icarus Scene Engine 1.10.306.840: Icarus Professional, Icarus Player, the supporting software for Icarus Scene Engine, with some included samples, and the start of a tutorial (with ...mavjuz WndLpt: wndlpt-0.2.5: New: Response to 5 LPT inputs "test i 1" New: Reaction to 12 LPT outputs "test q 8" New: Reaction to all LPT pins "test pin 15" New: Syntax: ...Neural Cryptography in F#: Neural Cryptography 0.0.1: The most simple version of this project. It has a neural network that works just like logical AND and a possibility to recreate neural network from...Password Provider: 1.0.3: This release fixes a bug which caused the program to crash when double clicking on a generic item.RoTwee: RoTwee 6.2.0.0: New feature is as next. 16649 Add hashtag for tweet of tune.Now you can tweet your playing tune with hashtag.Visual Studio DSite: Picture Viewer (Visual C++ 2008): This example source code allows you to view any picture you want in the click of a button. All you got to do is click the button and browser via th...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.8.00: Whats New File Browser: Folders & Files View reworked File Browser: Folders & Files View reworked File Browser: Folders are displayed as TreeVi...WSDLGenerator: WSDLGenerator 0.0.0.4: - replaced CommonLibrary.dll by CommandLineParser.dll - added better support for custom complex typesMost Popular ProjectsMetaSharpSilverlight ToolkitASP.NET Ajax LibraryAll-In-One Code FrameworkWindows 7 USB/DVD Download Toolニコ生アラートWindows Double ExplorerVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2Caliburn: An Application Framework for WPF and SilverlightArkSwitchMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterFarseer Physics EngineFasterflect - A Fast and Simple Reflection APIFluent Assertions

  Read the article

• Testing Mobile Websites with Adobe Shadow

  - by dwahlin

  It’s no surprise that mobile development is all the rage these days. With all of the new mobile devices being released nearly every day the ability for developers to deliver mobile solutions is more important than ever. Nearly every developer or company I’ve talked to recently about mobile development in training classes, at conferences, and on consulting projects says that they need to find a solution to get existing websites into the mobile space. Although there are several different frameworks out there that can be used such as jQuery Mobile, Sencha Touch, jQTouch, and others, how do you test how your site renders on iOS, Android, Blackberry, Windows Phone, and the variety of mobile form factors out there? Although there are different virtual solutions that can be used including Electric Plum for iOS, emulators, browser plugins for resizing the laptop/desktop browser, and more, at some point you need to test on as many physical devices as possible. This can be extremely challenging and quite time consuming though especially when you consider that you have to manually enter URLs into devices and click links on each one to drill-down into sites. Adobe Labs just released a product called Adobe Shadow (thanks to Kurt Sprinzl for letting me know about it) that significantly simplifies testing sites on physical devices, debugging problems you find, and even making live modifications to HTML and CSS content while viewing a site on the device to see how rendering changes. You can view a page in your laptop/desktop browser and have it automatically pushed to all of your devices without actually touching the device (a huge time saver). See a problem with a device? Locate it using the free Chrome extension, pull up inspection tools (based on the Chrome Developer tools) and make live changes through Chrome that appear on the respective device so that it’s easy to identify how problems can be resolved. I’ve been using Adobe Shadow and am very impressed with the amount of time saved and the different features that it offers. In the rest of the post I’ll walk through how to get it installed, get it started, and use it to view and debug pages.   Getting Adobe Shadow Installed The following steps can be used to get Adobe Shadow installed: 1. Download and install Adobe Shadow on your laptop/desktop 2. Install the Adobe Shadow extension for Chrome 3. Install the Adobe Shadow app on all of your devices (you can find it in various app stores) 4. Connect your devices to Wifi. Make sure they’re on the same network that your laptop/desktop machine is on   Getting Adobe Shadow Started Once Adobe Shadow is installed, you’ll need to get it running on your laptop/desktop and on all your mobile devices. The following steps walk through that process: 1. Start the Adobe Shadow application on your laptop/desktop 2. Start the Adobe Shadow app on each of your mobile devices 3. Locate the laptop/desktop name in the list that’s shown on each mobile device: 4. Select the laptop/desktop name and a passcode will be shown: 5. Open the Adobe Shadow Chrome extension on the laptop/desktop and enter the passcode for the given device: Using Adobe Shadow to View and Modify Pages Once Adobe Shadow is up and running on your laptop/desktop and on all of your mobile devices you can navigate to a page in Chrome on the laptop/desktop and it will automatically be pushed out to all connected mobile devices. If you have 5 mobile devices setup they’ll all navigate to the page displayed in Chrome (pretty awesome!). This makes it super easy to see how a given page looks on your iPad, Android device, etc. without having to touch the device itself. If you find a problem with a page on a device you can select the device in the Chrome Adobe Shadow extension on your laptop/desktop and select the remote inspector icon (it’s the < > icon): This will pull up the Adobe Shadow remote debugging window which contains the standard Chrome Developer tool tabs such as Elements, Resources, Network, etc. Click on the Elements tab to see the HTML rendered for the target device and then drill into the respective HTML content, CSS styles, etc. As HTML elements are selected in the Adobe Shadow debugging tool they’ll be highlighted on the device itself just like they would if you were debugging a page directly in Chrome with the developer tools. Here’s an example from my Android device that shows how the page looks on the device as I select different HTML elements on the laptop/desktop: Conclusion I’m really impressed with what I’ve to this point from Adobe Shadow. Controlling pages that display on devices directly from my laptop/desktop is a big time saver and the ability to remotely see changes made through the Chrome Developer Tools (on my laptop/desktop) really pushes the tool over the top. If you’re developing mobile applications it’s definitely something to check out. It’s currently free to download and use. For additional details check out the video below:  

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88  | Next Page >