Search Results

Search found 2111 results on 85 pages for 'alan solaris re'.

Page 84/85 | < Previous Page | 80 81 82 83 84 85  | Next Page >

  • All Xen domU LVM volumes corrupt after reboot

    - by zcs
    I'm running a Debian Squeeze dom0, and after rebooting it all 7 of my domUs have data corruption. Each is setup as ext3 partition directly on a separate lvm2 volume. None of the lvm volumes will mount; all have bad superblocks. I've tried e2fsck with each superblock to no avail. What else can I try? Each domU has two LVM volumes connected to it, one for the disk and one for swap. The disk is mounted at root, formatted as a normal ext3 partition as a xen-blk device. The volumes are never mounted outside of the guest OS. I'm running Ubuntu 11.04 using the instructions here. I'm not sure that they didn't shutdown properly, all I know is they were corrupt after I issues a clean 'reboot' on the dom0. Here's a sample Xen config file; the rest are the same except for name, vcpus, memory, vif and disk. name = 'load1' vcpus = 2 memory = 512 vif = ['bridge=prbr0', 'bridge=eth0'] disk = ['phy:/dev/VolGroup00/load1-disk,xvda,w','phy:/dev/VolGroup00/load1-swap,xvdb,w'] #============================================================================ # Debian Installer specific variables def check_bool(name, value): value = str(value).lower() if value in ('t', 'tr', 'tru', 'true'): return True return False global var_check_with_default def var_check_with_default(default, var, val): if val: return val return default xm_vars.var('install', use='Install Debian, default: false', check=check_bool) xm_vars.var("install-method", use='Installation method to use "cdrom" or "network" (default: network)', check=lambda var, val: var_check_with_default('network', var, val)) # install-method == "network" xm_vars.var("install-mirror", use='Debian mirror to install from (default: http://archive.ubuntu.com/ubuntu)', check=lambda var, val: var_check_with_default('http://archive.ubuntu.com/ubuntu', var, val)) xm_vars.var("install-suite", use='Debian suite to install (default: natty)', check=lambda var, val: var_check_with_default('natty', var, val)) # install-method == "cdrom" xm_vars.var("install-media", use='Installation media to use (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-cdrom-device", use='Installation media to use (default: xvdd)', check=lambda var, val: var_check_with_default('xvdd', var, val)) # Common options xm_vars.var("install-arch", use='Debian mirror to install from (default: amd64)', check=lambda var, val: var_check_with_default('amd64', var, val)) xm_vars.var("install-extra", use='Extra command line options (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-installer", use='Debian installer to use (default: network uses install-mirror; cdrom uses /install.ARCH)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-kernel", use='Debian installer kernel to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-ramdisk", use='Debian installer ramdisk to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.check() if not xm_vars.env.get('install'): bootloader="/usr/sbin/pygrub" elif xm_vars.env['install-method'] == "network": import os.path print "Install Mirror: %s" % xm_vars.env['install-mirror'] print "Install Suite: %s" % xm_vars.env['install-suite'] if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = xm_vars.env['install-mirror']+"/dists/"+xm_vars.env['install-suite'] + \ "/main/installer-"+xm_vars.env['install-arch']+"/current/images" print "Installer: %s" % installer print print "WARNING: Installer kernel and ramdisk are not authenticated." print if xm_vars.env.get('install-kernel'): kernelurl = xm_vars.env['install-kernel'] else: kernelurl = installer + "/netboot/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskurl = xm_vars.env['install-ramdisk'] else: ramdiskurl = installer + "/netboot/xen/initrd.gz" import urllib class MyUrlOpener(urllib.FancyURLopener): def http_error_default(self, req, fp, code, msg, hdrs): raise IOError("%s %s" % (code, msg)) urlopener = MyUrlOpener() try: print "Fetching %s" % kernelurl kernel, _ = urlopener.retrieve(kernelurl) print "Fetching %s" % ramdiskurl ramdisk, _ = urlopener.retrieve(ramdiskurl) except IOError, _: raise elif xm_vars.env['install-method'] == "cdrom": arch_path = { 'i386': "/install.386", 'amd64': "/install.amd" } if xm_vars.env['install-media']: print "Install Media: %s" % xm_vars.env['install-media'] else: raise OptionError("No installation media given.") if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = arch_path[xm_vars.env['install-arch']] print "Installer: %s" % installer if xm_vars.env.get('install-kernel'): kernelpath = xm_vars.env['install-kernel'] else: kernelpath = installer + "/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskpath = xm_vars.env['install-ramdisk'] else: ramdiskpath = installer + "/xen/initrd.gz" disk.insert(0, 'file:%s,%s:cdrom,r' % (xm_vars.env['install-media'], xm_vars.env['install-cdrom-device'])) bootloader="/usr/sbin/pygrub" bootargs="--kernel=%s --ramdisk=%s" % (kernelpath, ramdiskpath) print "From CD" else: print "WARNING: Unknown install-method: %s." % xm_vars.env['install-method'] if xm_vars.env.get('install'): # Figure out command line if xm_vars.env['install-extra']: extras=[xm_vars.env['install-extra']] else: extras=[] # Reboot will just restart the installer since this file is not # reparsed, so halt and restart that way. extras.append("debian-installer/exit/always_halt=true") extras.append("--") extras.append("quiet") console="hvc0" try: if len(vfb) >= 1: console="tty0" except NameError, e: pass extras.append("console="+ console) extra = str.join(" ", extras) print "command line is \"%s\"" % extra root There are two LVM logical volumes connected to each VM. Here's the fdisk -l output for the disk volume: Disk /dev/VolGroup00/VMNAME-disk: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00029c01 Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-disk1 1 1045 8386560 83 Linux And the swap volume: Disk /dev/VolGroup00/VMNAME-swap: 536 MB, 536870912 bytes 37 heads, 35 sectors/track, 809 cylinders Units = cylinders of 1295 * 512 = 663040 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004faae Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-swap1 2 809 522240 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(1, 21, 19) Partition 1 has different physical/logical endings: phys=(65, 36, 35) logical=(808, 4, 28)

    Read the article

  • Centos 6.3 vsftp unable to upload file to apache webserver

    - by user148648
    I am new to Centos, I did work with Sun Solaris and upload files to Apache web server before. I create an end user account and manage to ftp using command prompt to the server, error message is '226 Transfer Done (but failed to open directory). Content of my vsftpd.conf as below # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # ** may need to comment it back # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 local_umask=077 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=YES # *** maybe to comment it back!!! # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES # ** may need to comment it back!!! # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. ascii_upload_enable=YES ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Warning, only for authorize login. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). chroot_local_user=YES chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list local_root=/var/www # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES

    Read the article

  • Recover RAID 5 data after created new array instead of re-using

    - by Brigadieren
    Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto another separate off the computer hard drive until that completely failed and was thrown away. A few days back we had a power outage and after rebooting my box wouldn't mount the raid. In my infinite wisdom I entered mdadm --create -f... command instead of mdadm --assemble and didn't notice the travesty that I had done until after. It started the array degraded and proceeded with building and syncing it which took ~10 hours. After I was back I saw that that the array is successfully up and running but the raid is not I mean the individual drives are partitioned (partition type f8 ) but the md0 device is not. Realizing in horror what I have done I am trying to find some solutions. I just pray that --create didn't overwrite entire content of the hard driver. Could someone PLEASE help me out with this - the data that's on the drive is very important and unique ~10 years of photos, docs, etc. Is it possible that by specifying the participating hard drives in wrong order can make mdadm overwrite them? when I do mdadm --examine --scan I get something like ARRAY /dev/md/0 metadata=1.2 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b name=<hostname>:0 Interestingly enough name used to be 'raid' and not the host hame with :0 appended. Here is the 'sanitized' config entries: DEVICE /dev/sdf1 /dev/sde1 /dev/sdd1 CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST <system> MAILADDR root ARRAY /dev/md0 metadata=1.2 name=tanserv:0 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b Here is the output from mdstat cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[0] sdf1[3] sde1[1] 1953517568 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU] unused devices: <none> fdisk shows the following: fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf62e Device Boot Start End Blocks Id System /dev/sda1 * 1 9443 75846656 83 Linux /dev/sda2 9443 9730 2301953 5 Extended /dev/sda5 9443 9730 2301952 82 Linux swap / Solaris Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de8dd Device Boot Start End Blocks Id System /dev/sdb1 1 91201 732572001 8e Linux LVM Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00056a17 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 8e Linux LVM Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ca948 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/dm-0: 1250.3 GB, 1250254913536 bytes 255 heads, 63 sectors/track, 152001 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x93a66687 Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6edc059 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/md0: 2000.4 GB, 2000401989632 bytes 2 heads, 4 sectors/track, 488379392 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 524288 bytes / 1048576 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Per suggestions I did clean up the superblocks and re-created the array with --assume-clean option but with no luck at all. Is there any tool that will help me to revive at least some of the data? Can someone tell me what and how the mdadm --create does when syncs to destroy the data so I can write a tool to un-do whatever was done? After the re-creating of the raid I run fsck.ext4 /dev/md0 and here is the output root@tanserv:/etc/mdadm# fsck.ext4 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Per Shanes' suggestion I tried root@tanserv:/home/mushegh# mkfs.ext4 -n /dev/md0 mke2fs 1.41.14 (22-Dec-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=128 blocks, Stripe width=256 blocks 122101760 inodes, 488379392 blocks 24418969 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 14905 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 and run fsck.ext4 with every backup block but all returned the following: root@tanserv:/home/mushegh# fsck.ext4 -b 214990848 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Invalid argument while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Any suggestions? Regards!

    Read the article

  • fd partitions gone from 2 discs, md happy with it and resyncs. How to recover ?

    - by d0nd
    Hey gurus, need some help badly with this one. I run a server with a 6Tb md raid5 volume built over 7*1Tb disks. I've had to shut down the server lately and when it went back up, 2 out of the 7 disks used for the raid volume had lost its conf : dmesg : [ 10.184167] sda: sda1 sda2 sda3 // System disk [ 10.202072] sdb: sdb1 [ 10.210073] sdc: sdc1 [ 10.222073] sdd: sdd1 [ 10.229330] sde: sde1 [ 10.239449] sdf: sdf1 [ 11.099896] sdg: unknown partition table [ 11.255641] sdh: unknown partition table All 7 disks have same geometry and were configured alike : dmesg : Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect All 7 disks (sdb1, sdc1, sdd1, sde1, sdf1, sdg1, sdh1) were used in a md raid5 xfs volume. When booting, md, which was (obviously) out of sync kicked in and automatically started rebuilding over the 7 disks, including the two "faulty" ones; xfs tried to do some shenanigans as well: dmesg : [ 19.566941] md: md0 stopped. [ 19.817038] md: bind<sdc1> [ 19.817339] md: bind<sdd1> [ 19.817465] md: bind<sde1> [ 19.817739] md: bind<sdf1> [ 19.817917] md: bind<sdh> [ 19.818079] md: bind<sdg> [ 19.818198] md: bind<sdb1> [ 19.818248] md: md0: raid array is not clean -- starting background reconstruction [ 19.825259] raid5: device sdb1 operational as raid disk 0 [ 19.825261] raid5: device sdg operational as raid disk 6 [ 19.825262] raid5: device sdh operational as raid disk 5 [ 19.825264] raid5: device sdf1 operational as raid disk 4 [ 19.825265] raid5: device sde1 operational as raid disk 3 [ 19.825267] raid5: device sdd1 operational as raid disk 2 [ 19.825268] raid5: device sdc1 operational as raid disk 1 [ 19.825665] raid5: allocated 7334kB for md0 [ 19.825667] raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2 [ 19.825669] RAID5 conf printout: [ 19.825670] --- rd:7 wd:7 [ 19.825671] disk 0, o:1, dev:sdb1 [ 19.825672] disk 1, o:1, dev:sdc1 [ 19.825673] disk 2, o:1, dev:sdd1 [ 19.825675] disk 3, o:1, dev:sde1 [ 19.825676] disk 4, o:1, dev:sdf1 [ 19.825677] disk 5, o:1, dev:sdh [ 19.825679] disk 6, o:1, dev:sdg [ 19.899787] PM: Starting manual resume from disk [ 28.663228] Filesystem "md0": Disabling barriers, not supported by the underlying device [ 28.663228] XFS mounting filesystem md0 [ 28.884433] md: resync of RAID array md0 [ 28.884433] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 28.884433] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 28.884433] md: using 128k window, over a total of 976759936 blocks. [ 29.025980] Starting XFS recovery on filesystem: md0 (logdev: internal) [ 32.680486] XFS: xlog_recover_process_data: bad clientid [ 32.680495] XFS: log mount/recovery failed: error 5 [ 32.682773] XFS: log mount failed I ran fdisk and flagged sdg1 and sdh1 as fd. I tried to reassemble the array but it didnt work: no matter what was in mdadm.conf, it still uses sdg and sdh instead of sdg1 and sdh1. I checked in /dev and I see no sdg1 and and sdh1, shich explains why it wont use it. I just don't know why those partitions are gone from /dev and how to readd those... blkid : /dev/sda1: LABEL="boot" UUID="519790ae-32fe-4c15-a7f6-f1bea8139409" TYPE="ext2" /dev/sda2: TYPE="swap" /dev/sda3: LABEL="root" UUID="91390d23-ed31-4af0-917e-e599457f6155" TYPE="ext3" /dev/sdb1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdc1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdd1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sde1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdf1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdg: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdh: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" fdisk -l : Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8c878c87 Device Boot Start End Blocks Id System /dev/sda1 * 1 12 96358+ 83 Linux /dev/sda2 13 134 979965 82 Linux swap / Solaris /dev/sda3 135 4865 38001757+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc9bdc1e9 Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xcc356c30 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe87f7a3d Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xb17a2d22 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdg: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8f3bce61 Device Boot Start End Blocks Id System /dev/sdg1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdh: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa98062ce Device Boot Start End Blocks Id System /dev/sdh1 1 121601 976760001 fd Linux raid autodetect I really dont know what happened nor how to recover from this mess. Needless to say the 5TB or so worth of data sitting on those disks are very valuable to me... Any idea any one? Did anybody ever experienced a similar situation or know how to recover from it ? Can someone help me? I'm really desperate... :x

    Read the article

  • Dual Boot issues with Windows 7 and Ubuntu

    - by Michael
    I'm finding myself in a rather unique situation. I've read through just about every resource I can find about this and while things have helped me understand some background, I haven't yet been able to find a solution. So I'm asking here. I originally had just a Windows 7 64-bit OS installation on my desktop. Learning that I couldn't do anything with Apache, PHP and MySql from within a 64-bit system, I did some research and found out that I could use Ubuntu. I've installed the latest version: 11.04. I created a CD to install Ubuntu from and the install went just fine. I installed it side-by-side with Windows 7. I can boot into Ubuntu just fine through the dual-boot option. When I reboot to load Windows though, the Grub2 list shows Windows 7 (loader) and when I select this option the Windows System Recovery loads instead of the actual OS. I haven't made it past there because I didn't know what to do. I just shut the computer down and rebooted into Ubuntu. I've been working for the last hour and a half to try to figure out how to boot into the Windows 7 OS and I haven't got a clue. While I'm somewhat proficient with Windows 7, I'm totally new to Ubuntu, so if you do know what needs to happen, please keep it simple enough that I'll be able to understand. Thanks for all your help in advance. Here's the results after using the Boot Info Script: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for cbh. => Windows is installed in the MBR of /dev/sdb => Grub 2 is installed in the MBR of /dev/mapper/pdc_bdadcfbdif and looks on the same drive in partition #5 for cbh. sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /boot/BCD sdb4: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb6: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: pdc_bdadcfbdif1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD pdc_bdadcfbdif2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe pdc_bdadcfbdif3: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy mount: unknown filesystem type '' =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sda2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/sda3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sdb2 206,911 1,342,554,688 1,342,347,778 7 HPFS/NTFS /dev/sdb3 1,930,344,448 1,953,521,663 23,177,216 7 HPFS/NTFS /dev/sdb4 1,342,556,158 1,930,344,447 587,788,290 5 Extended /dev/sdb5 1,342,556,160 1,896,806,399 554,250,240 83 Linux /dev/sdb6 1,896,808,448 1,930,344,447 33,536,000 82 Linux swap / Solaris Drive: pdc_bdadcfbdif ___________________ _____________________________________________________ Disk /dev/mapper/pdc_bdadcfbdif: 750.0 GB, 749999947776 bytes 255 heads, 63 sectors/track, 91182 cylinders, total 1464843648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/mapper/pdc_bdadcfbdif1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 ends after the last sector of /dev/mapper/pdc_bdadcfbdif blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/mapper/pdc_bdadcfbdif1 888E54CC8E54B482 ntfs SYSTEM /dev/mapper/pdc_bdadcfbdif2 C2766BF6766BEA1D ntfs OS /dev/mapper/pdc_bdadcfbdif: PTTYPE="dos" /dev/sda1 888E54CC8E54B482 ntfs SYSTEM /dev/sda2 C2766BF6766BEA1D ntfs OS /dev/sda3 BE6CA31D6CA2CF87 ntfs HP_RECOVERY /dev/sda promise_fasttrack_raid_member /dev/sdb1 20B65685B6565B7C ntfs SYSTEM /dev/sdb2 B4467A314679F508 ntfs HP /dev/sdb3 6E10B7A410B77227 ntfs FACTORY_IMAGE /dev/sdb4: PTTYPE="dos" /dev/sdb5 266f9801-cf4f-4acc-affa-2092be035f0c ext4 /dev/sdb6 1df35749-a887-45ff-a3de-edd52239847d swap /dev/sdb: PTTYPE="dos" error: /dev/mapper/pdc_bdadcfbdif3: No such file or directory error: /dev/sdc: No medium found error: /dev/sdd: No medium found error: /dev/sde: No medium found error: /dev/sdf: No medium found error: /dev/sdg: No medium found ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sdb5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc- affa-2092be035f0c ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic-pae } menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c echo 'Loading Linux 2.6.38-8-generic-pae ...' linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc-affa-2092be035f0c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic-pae } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos1)' search --no-floppy --fs-uuid --set=root 20B65685B6565B7C chainloader +1 } menuentry "Windows Recovery Environment (loader) (on /dev/sdb3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos3)' search --no-floppy --fs-uuid --set=root 6E10B7A410B77227 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb5 during installation UUID=266f9801-cf4f-4acc-affa-2092be035f0c / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb6 during installation UUID=1df35749-a887-45ff-a3de-edd52239847d none swap sw 0 0 =================== sdb5: Location of files loaded by Grub: =================== 900.1GB: boot/grub/core.img 825.0GB: boot/grub/grub.cfg 688.7GB: boot/initrd.img-2.6.38-8-generic-pae 688.0GB: boot/vmlinuz-2.6.38-8-generic-pae 688.7GB: initrd.img 688.0GB: vmlinuz =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on pdc_bdadcfbdif3 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde sdf sdg =============================== StdErr Messages: =============================== ERROR: dos: partition address past end of RAID device hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory ERROR: dos: partition address past end of RAID device

    Read the article

  • Introducing… SharePress!

    - by Bil Simser
    For those that follow me I’ve been away from blogging and twittering for a couple of months. This is the reason. For the last few months I’ve been working with a cross-functional team putting together a new product from the people that run WordPress, the free premiere blogging platform. The result is a new product we call SharePress, a highly extensible blogging and content management platform with the usability of WordPress and the power of SharePoint combined into a single product. SharePress gives you SharePoint sites that are SEO-friendly delivered with a Web 2.0 ease of use, leveraging all of the existing abilities of SharePoint and WordPress that we know today. The Reason Back in December I was approached by the WordPress team about building a new platform that took advantage of the power of SharePoint but the ease of WordPress. I’m no stranger to WordPress and it’s 5 minute no-holds-barred install (I’ve always wanted SharePoint to do this!) and I run my personal blog on WordPress as does my better half, Princess Jenn. There’s always been a pitch by so-called Web 2.0 applications to deliver the power of SharePoint but the ease of [insert product here] over the past year or so. I checked each and every one of them out, but they fell woefully short when it came to SharePoint’s document management, versioning, and customization. They try, but it’s never been up to par in my books. On the flipside, SharePoint has always been tops in collaboration in the Enterprise but it’s painful to develop web parts, UI customization can be tricky, and there’s just no user community for something as simple as themes and designs. The Product Enter SharePress. Is it SharePoint? Is it WordPress? It’s both, and neither. Everything you like about both products are there but this is a bold new product that is positioned to bring SharePoint to the masses while maintaining the fidelity of an Enterprise 2.0 collaboration platform. SharePress delivers on all fronts including: The ability to leverage any WordPress/Joomla/Drupal/DotNetNuke themes and skins inside of SharePoint Run any WordPress/Drupal/Joomla/DotNetNuke/SharePoint plug-in/module/web part/feature works out of the box with SharePress SEO-friendly URLs and pages Permalinks for all content All the features of SharePoint Server 2010 (including InfoPath, Excel, and Access services) included in the price Small deployment footprint. You decide how much to deploy and where. Independent Database Abstraction Layer (iDal) that allows you to deploy to SQL Server 2005/2008, MySQL, and PostgreSQL Portable Rendering Engine Layer (PREL) so you host .NET or PHP on Apache or IIS (version 7 or higher). The install feature is built around WordPress and it’s famous 5-minute install (actually, it’s never taken me more than 1 minute). SharePress installs with two screens after the files are uploaded to your server (which can be done entirely using FTP): After you enter two fields of information click “Install SharePress” and you’ll be done: No mess, no fuss, no complicated dependencies, and no server access required! How simpler could this be? The Technology WordPress plug-ins and themes working with SharePoint? Of course! The answer is IronPython which has now reached a maturity level capable of doing on the fly code language conversions. SharePress is a brand new product not built on top of any previous platform but leverages all the power of each of those applications through a patent pending technique called SharePress Multi-plAtfoRm Technology (SMART). SMART will convert PHP code on the fly into Python (using SWIG as an intermediate processor) which is then compiled to MSIL and then delivered back as an ASP.NET MVC application (output is C# or VB.NET, but you can build your own SMART converter to output a different language). Sound complicated? It is, but it’s all behind the scenes and you don’t have to worry about a thing. This image illustrates the technology stack and process: So users can load up out of the box PHP themes and plug-ins from the WordPress/Joomla/Drupal community into the SMART converter and output MSIL that is used by the SharePress engine and rendered on the fly to the end user. Supported PHP versions are 4.xx and 5.xx with version 6 support to come when it’s released. Similarly you can take any .NET application, DotNetNuke Module, SharePoint Web Part or event handler and feed it into the converter to output the same. Everything is reverse compiled into MSIL so it becomes technology agnostic. No source code access is needed and the SMART converter can handle obfuscated .NET assemblies that were built with .NET 1.0, 1.1, 2.0, 3.5, and 4.0. With this technology you can also with the flip of a switch have the output create PHP pages for you. This allows you to run SharePress on Unix based systems running PHP and MySQL, allowing you to deliver your SharePoint like experience to your users with a $0 infrastructure footprint. Here’s SharePress with the default WordPress post imported then a stock SharePoint collaboration site was imported. The site was then applied with the default Kubrick theme from WordPress. The Features Deploy any of the freely available 100,000 WordPress/Joomla/Drupal themes instantly to your runtime SharePress environment and preview or activate them right from your browser. Built-in Web 2.0 jQuery Enabled End User and Administrator Web Interface. Never have to remote into a server again! Run any SharePoint Web Part or Event Handler directly without modification or access to source code in SharePress. Use any WordPress/Joomla/Drupal plug-in directly in SharePress, no local admin or access to server. Just upload and activate. Upload and Activate any SharePoint Solution Package to any site remotely. No rebuilding. Changes made to sites require no compiling or rebuilding and are published immediately. Password Protected Content. You can give passwords to individual posts, articles, pages, documents, forms, and list items. A powerful polymorphic Captcha system backs the security interface and vendors can easily tie into smart card readers, fingerprint readers, and retina scanners for authorization and identification. OpenID, Windows Live, and Windows Authentication are supported out of the box. Infinitely customizable and extensible. You can leverage plug-ins from the open source community to do practically anything, all configured and uploaded via the browser. Additionally the developer API (available soon) allows you to build extensions in .NET, PHP, and Python with little effort. Easy Importing. We have importers for Blogger, WordPress, Drupal, Joomla, DotNetNuke, and SharePoint so you can populate your site quickly and easily with full metadata modeling and creation. Banner Management. It’s easy to setup banners for your web site complete with impression numbers, special URLs, and more. Menu Manager. The Menu Manager allows you to create as many menus as you want, each one can be associated to specific audiences or roles and then be styled across multiple contexts including the same menu delivered as a fly out, rollover, drop down, and just about any navigation you can think of. Collaborative ShareBook. Our exclusive book feature allows you to setup a “book” and then authorize individuals to contribute content. Permalinks. All content in SharePress has a permanent or “perma link” associated with it so people can link to it freely without fear of broken links. Apache or IIS, Unix / Linux / BSD / Solaris / Windows / Mac OS X support. Deliver SharePress the way *you* want from the platform *you* decide. Database Independence. We know people wanted to run on any database platform so SharePress is built on top of a database abstraction layer that allows you to run on SQL Server, MySQL, PostgreSQL. Other databases can be supported by writing a supporting database script consisting of fourteen function calls. The script can be written in Perl, Python, AWK, PowerShell, Unix Shell scripts, VBA, or simple DOS batch files. The Team SharePress is the work of a lot of people in both the WordPress and SharePoint community. I worked with a lot of SharePoint MVPs to create this new product as we really wanted to deliver the most compatible and feature rich system in a product that we would be proud of. Many thanks go out to Eli Bleeker, Todd Robillard, Scot Larson, Daniel Hillier, Shane Fox, Box Peran, Amanda English, and Bill Murray for doing the heavy lifting and all of their expertise and innovative thinking to get this product out. Licensing and Pricing SharePress is still in the final stages for pricing but we’re looking at a price point somewhere between $99-$100 to make it affordable for everyone. We plan to announce final pricing sometime in the next few weeks. There are no additional charges for Enterprise versions or additional features. Everything you see is what’s available and it’s just a matter of lighting up your site with whatever feature you want to enable. The product will not be open source but source code licenses will be available to ISVs who are interested in interfacing with the API at a low level. Cost will be $25,000 USD per developer and gives you complete access to the source code to the SharePress Foundation System and the .NET 4.0 Framework source code. Conclusion We hope you enjoy the launch of SharePress as the new premium blogging and content management platform for both Intranets and the Internet. We think we’ve build the best of breed solutions here and made it easy for anyone to get started with a minimal of infrastructure but allow the scalability of SharePress to shine through in the Enterprise 2.0 world. We encourage your feedback so please leave comments as to what you’re looking for in this system as we’re always evolving it to make it a better product for everyone.

    Read the article

  • Unity not Working 14.04

    - by Back.Slash
    I am using Ubuntu 14.04 LTS x64. I did a sudo apt-get upgrade yesterday and restarted my PC. Now my taskbar and panel are missing. When I try to restart Unity using unity --replace Then I get error: unity-panel-service stop/waiting compiz (core) - Info: Loading plugin: core compiz (core) - Info: Starting plugin: core unity-panel-service start/running, process 3906 compiz (core) - Info: Loading plugin: ccp compiz (core) - Info: Starting plugin: ccp compizconfig - Info: Backend : gsettings compizconfig - Info: Integration : true compizconfig - Info: Profile : unity compiz (core) - Info: Loading plugin: composite compiz (core) - Info: Starting plugin: composite compiz (core) - Info: Loading plugin: opengl compiz (core) - Info: Unity is fully supported by your hardware. compiz (core) - Info: Unity is fully supported by your hardware. compiz (core) - Info: Starting plugin: opengl libGL error: dlopen /usr/lib/x86_64-linux-gnu/dri/i965_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/i965_dri.so: undefined symbol: _glapi_tls_Dispatch) libGL error: dlopen ${ORIGIN}/dri/i965_dri.so failed (${ORIGIN}/dri/i965_dri.so: cannot open shared object file: No such file or directory) libGL error: dlopen /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: i965_dri.so libGL error: driver pointer missing libGL error: failed to load driver: i965 libGL error: dlopen /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch) libGL error: dlopen ${ORIGIN}/dri/swrast_dri.so failed (${ORIGIN}/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: dlopen /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: swrast_dri.so libGL error: failed to load driver: swrast compiz (core) - Info: Loading plugin: compiztoolbox compiz (core) - Info: Starting plugin: compiztoolbox compiz (core) - Info: Loading plugin: decor compiz (core) - Info: Starting plugin: decor compiz (core) - Info: Loading plugin: vpswitch compiz (core) - Info: Starting plugin: vpswitch compiz (core) - Info: Loading plugin: snap compiz (core) - Info: Starting plugin: snap compiz (core) - Info: Loading plugin: mousepoll compiz (core) - Info: Starting plugin: mousepoll compiz (core) - Info: Loading plugin: resize compiz (core) - Info: Starting plugin: resize compiz (core) - Info: Loading plugin: place compiz (core) - Info: Starting plugin: place compiz (core) - Info: Loading plugin: move compiz (core) - Info: Starting plugin: move compiz (core) - Info: Loading plugin: wall compiz (core) - Info: Starting plugin: wall compiz (core) - Info: Loading plugin: grid compiz (core) - Info: Starting plugin: grid compiz (core) - Info: Loading plugin: regex compiz (core) - Info: Starting plugin: regex compiz (core) - Info: Loading plugin: imgpng compiz (core) - Info: Starting plugin: imgpng compiz (core) - Info: Loading plugin: session compiz (core) - Info: Starting plugin: session I/O warning : failed to load external entity "/home/sumeet/.compiz/session/10de541a813cc1a8fc140170575114755000000020350005" compiz (core) - Info: Loading plugin: gnomecompat compiz (core) - Info: Starting plugin: gnomecompat compiz (core) - Info: Loading plugin: animation compiz (core) - Info: Starting plugin: animation compiz (core) - Info: Loading plugin: fade compiz (core) - Info: Starting plugin: fade compiz (core) - Info: Loading plugin: unitymtgrabhandles compiz (core) - Info: Starting plugin: unitymtgrabhandles compiz (core) - Info: Loading plugin: workarounds compiz (core) - Info: Starting plugin: workarounds compiz (core) - Info: Loading plugin: scale compiz (core) - Info: Starting plugin: scale compiz (core) - Info: Loading plugin: expo compiz (core) - Info: Starting plugin: expo compiz (core) - Info: Loading plugin: ezoom compiz (core) - Info: Starting plugin: ezoom compiz (core) - Info: Loading plugin: unityshell compiz (core) - Info: Starting plugin: unityshell WARN 2014-06-02 18:46:23 unity.glib.dbus.server GLibDBusServer.cpp:579 Can't register object 'org.gnome.Shell' yet as we don't have a connection, waiting for it... ERROR 2014-06-02 18:46:23 unity.debug.interface DebugDBusInterface.cpp:216 Unable to load entry point in libxpathselect: libxpathselect.so.1.4: cannot open shared object file: No such file or directory compiz (unityshell) - Error: GL_ARB_vertex_buffer_object not supported ERROR 2014-06-02 18:46:23 unity.shell.compiz unityshell.cpp:3850 Impossible to delete the unity locked stamp file compiz (core) - Error: Plugin initScreen failed: unityshell compiz (core) - Error: Failed to start plugin: unityshell compiz (core) - Info: Unloading plugin: unityshell X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 3 (X_GetWindowAttributes) Resource id in failed request: 0x3e000c9 Serial number of failed request: 10115 Current serial number in output stream: 10116 Any help would be highly appreciated. EDIT : My PC configuration description: Portable Computer product: Dell System XPS L502X (System SKUNumber) vendor: Dell Inc. version: 0.1 serial: 1006ZP1 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: administrator_password=unknown boot=normal chassis=portable family=HuronRiver System frontpanel_password=unknown keyboard_password=unknown power-on_password=unknown sku=System SKUNumber uuid=44454C4C-3000-1030-8036-B1C04F5A5031 *-core description: Motherboard product: 0YR8NN vendor: Dell Inc. physical id: 0 version: A00 serial: .1006ZP1.CN4864314C0560. slot: Part Component *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A11 date: 05/29/2012 size: 128KiB capacity: 2496KiB capabilities: pci pnp upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot smartbattery biosbootspecification netboot *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 19 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: Not Supported by CPU slot: CPU size: 800MHz capacity: 800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L1 cache physical id: 1a slot: L1-Cache size: 64KiB capacity: 64KiB capabilities: synchronous internal write-through data *-cache:1 description: L2 cache physical id: 1b slot: L2-Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through data *-cache:2 description: L3 cache physical id: 1c slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: synchronous internal write-back unified *-memory description: System Memory physical id: 1d slot: System board or motherboard size: 6GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: M471B5273DH0-CH9 vendor: Samsung physical id: 0 serial: 450F1160 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 0CA0E8E2 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:f0000000-f10fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:f0000000-f0ffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:3000(size=128) memory:f1000000-f107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:52 memory:f1400000-f17fffff memory:e0000000-efffffff ioport:4000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei_me latency=0 resources: irq:50 memory:f1c05000-f1c0500f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:16 memory:f1c09000-f1c093ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:53 memory:f1c00000-f1c03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode cap_list configuration: driver=pcieport resources: irq:16 *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:f1b00000-f1bfffff *-network description: Wireless interface product: Centrino Wireless-N 1030 [Rainbow Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: mon.wlan0 version: 34 serial: bc:77:37:14:47:e5 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-27-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:51 memory:f1b00000-f1b01fff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:19 memory:f1a00000-f1afffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:f1a00000-f1a01fff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 5 vendor: Intel Corporation physical id: 1c.4 bus info: pci@0000:00:1c.4 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:f1900000-f19fffff *-pci:5 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:2000(size=4096) ioport:f1800000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 06 serial: 14:fe:b5:a3:ac:40 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=172.19.167.151 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:49 ioport:2000(size=256) memory:f1804000-f1804fff memory:f1800000-f1803fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:f1c08000-f1c083ff *-isa description: ISA bridge product: HM67 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide:0 description: IDE interface product: 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 05 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:40b8(size=8) ioport:40cc(size=4) ioport:40b0(size=8) ioport:40c8(size=4) ioport:4090(size=16) ioport:4080(size=16) *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:f1c04000-f1c040ff ioport:efa0(size=32) *-ide:1 description: IDE interface product: 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller vendor: Intel Corporation physical id: 1f.5 bus info: pci@0000:00:1f.5 version: 05 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:40a8(size=8) ioport:40c4(size=4) ioport:40a0(size=8) ioport:40c0(size=4) ioport:4070(size=16) ioport:4060(size=16) *-scsi:0 physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: SAMSUNG HN-M640M physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2AR1 serial: S2T3J1KBC00006 size: 596GiB (640GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=6b746d91 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 0272-3e7f size: 348MiB capacity: 350MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2013-09-18 12:20:45 filesystem=ntfs label=System Reserved modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 116GiB capacity: 116GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 6037MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 110GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/os version: 3.1 serial: 4e7853ec-5555-a74d-82e0-9f49798d3772 size: 156GiB capacity: 156GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2013-09-19 09:19:00 filesystem=ntfs label=OS mount.fstype=fuseblk mount.options=ro,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted *-volume:3 description: Windows NTFS volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 logical name: /media/data version: 3.1 serial: 7666d55f-e1bf-e645-9791-2a1a31b24b9a size: 322GiB capacity: 322GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2013-09-17 23:27:01 filesystem=ntfs label=Data modified_by_chkdsk=true mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 mounted_on_nt4=true resize_log_file=true state=mounted upgrade_on_mount=true *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVD+-RW GT32N vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/sr0 version: A201 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-battery product: DELL vendor: SANYO physical id: 1 version: 2008 serial: 1.0 slot: Rear capacity: 57720mWh configuration: voltage=11.1V `

    Read the article

  • Can't add Fedora 14 to grub.

    - by Dananjaya
    Today I installed Fedora 14 in a different partition in the same hard drive as Ubuntu. At the Fedora 14 installation, I chose not to install Boot-loader in the MBR, and instead chose to install it in the Fedora partition itself, which is according to my HD layout /sda3. After the Fedora 14 installation I booted in to Ubuntu and ran sudo update-grub but 'grub.cfg' fails to add Fedora 14 in to the OS list. Here is the output of boot-info script. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sda3: __________________________________________________________________________ File system: ext4 Boot sector type: Grub Legacy Boot sector info: Grub Legacy (v0.97) is installed in the boot sector of sda3 and looks at sector 49897340 on boot drive #1 for the stage2 file. A stage2 file is at this location on /dev/sda. Stage2 looks on partition #3 for /grub/grub.conf. Operating System: Boot files: /grub/menu.lst /grub/grub.conf sda4: __________________________________________________________________________ File system: LVM2_member Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 49,865,759 49,863,712 83 Linux /dev/sda2 74,866,686 78,163,967 3,297,282 5 Extended /dev/sda5 74,866,688 78,163,967 3,297,280 82 Linux swap / Solaris /dev/sda3 49,866,752 50,890,751 1,024,000 83 Linux /dev/sda4 50,890,752 74,864,639 23,973,888 8e Linux LVM "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 03e2a8da-171f-49e9-b24d-434e66cd1140 ext4 /dev/sda3 dea81d77-a375-4d0e-954e-1829f6b91f10 ext4 /dev/sda4 mzVoj0-GHJu-DJr4-0G2Y-SzZ0-LTfW-F01yf9 LVM2_member /dev/sda5 3e89ba8e-7754-4ee4-aca1-e2a82bffb7a7 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda1 / ext4 (rw,errors=remount-ro,user_xattr,commit=0) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="2" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=1024x768 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux /boot/vmlinuz-2.6.38-8-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic } menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 echo 'Loading Linux 2.6.38-8-generic ...' linux /boot/vmlinuz-2.6.38-8-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux /boot/vmlinuz-2.6.35-28-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux /boot/vmlinuz-2.6.32-21-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.32-21-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 echo 'Loading Linux 2.6.32-21-generic ...' linux /boot/vmlinuz-2.6.32-21-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-21-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation # Commented out by Dropbox # UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=3e89ba8e-7754-4ee4-aca1-e2a82bffb7a7 none swap sw 0 0 UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 / ext4 errors=remount-ro,user_xattr 0 1 -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 0.065803528 = 0.070656000 boot/grub/core.img 1 21.263332367 = 22.831329280 boot/grub/grub.cfg 1 0.771381378 = 0.828264448 boot/initrd.img-2.6.31-wl 1 2.054199219 = 2.205679616 boot/initrd.img-2.6.32-21-generic 3 2.893260956 = 3.106615296 boot/initrd.img-2.6.35-28-generic 2 6.833232880 = 7.337127936 boot/initrd.img-2.6.38-8-generic 2 1.772453308 = 1.903157248 boot/vmlinuz-2.6.32-21-generic 2 2.068012238 = 2.220511232 boot/vmlinuz-2.6.35-28-generic 1 5.532531738 = 5.940510720 boot/vmlinuz-2.6.38-8-generic 1 6.833232880 = 7.337127936 initrd.img 2 2.893260956 = 3.106615296 initrd.img.old 2 5.532531738 = 5.940510720 vmlinuz 1 2.068012238 = 2.220511232 vmlinuz.old 1 ============================= sda3/grub/grub.conf: ============================= -------------------------------------------------------------------------------- # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,2) # kernel /vmlinuz-version ro root=/dev/mapper/VolGroup-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sda3 default=0 timeout=0 splashimage=(hd0,2)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.35.6-45.fc14.i686) root (hd0,2) kernel /vmlinuz-2.6.35.6-45.fc14.i686 ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet initrd /initramfs-2.6.35.6-45.fc14.i686.img -------------------------------------------------------------------------------- =================== sda3: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 23.792903900 = 25.547436032 grub/grub.conf 1 23.792903900 = 25.547436032 grub/menu.lst 1 23.793020248 = 25.547560960 grub/stage2 1 23.817364693 = 25.573700608 initramfs-2.6.35.6-45.fc14.i686.img 2 23.787566185 = 25.541704704 initrd-plymouth.img 1 23.791228294 = 25.545636864 vmlinuz-2.6.35.6-45.fc14.i686 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda2 00000000 81 71 62 ff a1 94 89 ff 4d 43 3a ff fa f2 ec ff |.qb.....MC:.....| 00000010 fb f6 f1 ff fc f8 f4 ff fc f8 f4 ff fc f8 f4 ff |................| 00000020 5d 56 50 ff a1 94 89 ff 81 70 62 ff 81 70 62 ff |]VP......pb..pb.| 00000030 81 70 62 ff 81 70 62 ff 81 70 62 ff a1 94 89 ff |.pb..pb..pb.....| 00000040 4d 43 3a ff fa f2 ec ff fb f6 f1 ff fc f8 f4 ff |MC:.............| 00000050 fc f8 f4 ff fc f8 f4 ff 5d 56 50 ff a1 94 89 ff |........]VP.....| 00000060 81 70 62 ff 81 70 62 ff 81 70 62 ff 81 70 62 ff |.pb..pb..pb..pb.| 00000070 81 70 62 ff a1 94 89 ff 4d 43 3a ff fa f2 ec ff |.pb.....MC:.....| 00000080 fb f6 f1 ff fc f8 f4 ff fc f8 f4 ff fc f8 f4 ff |................| 00000090 5d 56 50 ff a0 93 89 ff 80 6f 61 ff 80 6f 61 ff |]VP......oa..oa.| 000000a0 80 6f 61 ff 80 6f 61 ff 80 6f 61 ff a0 93 89 ff |.oa..oa..oa.....| 000000b0 4d 43 3a ff fa f2 ed ff fb f6 f2 ff fc f8 f5 ff |MC:.............| 000000c0 fc f8 f5 ff fc f8 f5 ff 5d 56 50 ff 9f 93 88 ff |........]VP.....| 000000d0 7f 6f 60 ff 7f 6f 60 ff 7f 6f 60 ff 7f 6f 60 ff |.o`..o`..o`..o`.| 000000e0 7f 6f 60 ff 9f 93 88 ff 4d 43 3a ff fa f2 ed ff |.o`.....MC:.....| 000000f0 fb f6 f2 ff fc f8 f5 ff fc f8 f5 ff fc f8 f5 ff |................| 00000100 5d 56 50 ff 9f 93 88 ff 7f 6f 60 ff 7f 6f 60 ff |]VP......o`..o`.| 00000110 7f 6f 60 ff 7f 6f 60 ff 7f 6f 60 ff 9f 93 88 ff |.o`..o`..o`.....| 00000120 4d 43 3a ff fa f2 ed ff fb f6 f2 ff fc f8 f5 ff |MC:.............| 00000130 fc f8 f5 ff fc f8 f5 ff 5d 56 50 ff 9e 92 88 ff |........]VP.....| 00000140 7e 6e 60 ff 7e 6e 60 ff 7e 6e 60 ff 7e 6e 60 ff |~n`.~n`.~n`.~n`.| 00000150 7e 6e 60 ff 9e 92 88 ff 4d 43 3a ff fa f2 ed ff |~n`.....MC:.....| 00000160 fb f6 f2 ff fc f8 f5 ff fc f8 f5 ff fc f8 f5 ff |................| 00000170 5d 56 50 ff 9e 92 88 ff 7d 6d 5f ff 7d 6d 5f ff |]VP.....}m_.}m_.| 00000180 7d 6d 5f ff 7d 6d 5f ff 7d 6d 5f ff 9e 92 88 ff |}m_.}m_.}m_.....| 00000190 4d 43 3a ff fa f2 ed ff fb f6 f2 ff fc f8 f5 ff |MC:.............| 000001a0 fc f8 f5 ff fc f8 f5 ff 5d 56 50 ff 9e 92 88 ff |........]VP.....| 000001b0 7d 6d 5f ff 7d 6d 5f ff 7d 6d 5f ff 7d 6d 00 fe |}m_.}m_.}m_.}m..| 000001c0 ff ff 82 fe ff ff 02 00 00 00 00 50 32 00 00 00 |...........P2...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== unlzma: Decoder error According to this Fedora 14 is visible in sda3. Does anybody know a way to add Fedora 14 to grub.cfg of Ubuntu so I can choose which OS to boot? Thanks in advance.

    Read the article

  • NEC uPD720200 USB 3.0 not working on Ubuntu 12.04

    - by Jagged
    I've recently installed Ubuntu 12.04 64-bit on a HP Envy 15 1104tx. Most stuff appears to be working fine with the exception of the two USB3 ports (USB2 port works fine). I've read a lot of articles but so far have not been able to find a solution. I've tried adding 'pci=nomsi' to '/etc/default/grub' but this made no difference. Some articles suggest booting into Windows and upgrading the firmware on the uPD720200. Any body had any experience of this? Is there a way I can checked the firmware version of the NEC uPD720200 in Linux to see if there is an update available? Any help appreciated. uname -a: Linux HP-ENVY-15-1104tx 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: hp-envy-15-1104tx description: Notebook product: HP ENVY 15 Notebook PC (WF591PA#ABG) vendor: Hewlett-Packard version: 0492110000241910001420000 serial: CNF0301C79 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=103C_5335KV sku=WF591PA#ABG uuid=434E4630-3330-3143-3739-60EB6906688F *-core description: Motherboard product: 1522 vendor: Hewlett-Packard physical id: 0 version: 36.35 serial: CNF0301C79 slot: Base Board Chassis Location *-firmware description: BIOS vendor: Hewlett-Packard physical id: 0 version: F.2B date: 10/12/2010 size: 1MiB capacity: 1472KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 16GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 0 serial: E13C4316 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 1 serial: E03C3E16 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 2 serial: 672279CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 3 serial: 652286CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-cpu description: CPU product: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz vendor: Intel Corp. physical id: 1d bus info: cpu@0 version: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz slot: CPU size: 1199MHz capacity: 1199MHz width: 64 bits clock: 1066MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L3 cache physical id: 1e slot: L3 Cache size: 8MiB capacity: 8MiB capabilities: synchronous internal write-through unified *-cache:1 description: L2 cache physical id: 20 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L1 cache physical id: 21 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache description: L1 cache physical id: 1f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci:0 description: Host bridge product: Core Processor DMI vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 11 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Core Processor PCI Express Root Port 1 vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:4000(size=4096) memory:d4100000-d41fffff ioport:c0000000(size=268435456) *-display description: VGA compatible controller product: Broadway PRO [Mobility Radeon HD 5800 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:58 memory:c0000000-cfffffff memory:d4100000-d411ffff ioport:4000(size=256) memory:d4140000-d415ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:56 memory:d4120000-d4123fff *-pci:1 description: PCI bridge product: Core Processor PCI Express Root Port 3 vendor: Intel Corporation physical id: 5 bus info: pci@0000:00:05.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d4000000-d40fffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:16 memory:d4000000-d4001fff *-generic:0 UNCLAIMED description: System peripheral product: Core Processor System Management Registers vendor: Intel Corporation physical id: 8 bus info: pci@0000:00:08.0 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:1 UNCLAIMED description: System peripheral product: Core Processor Semaphore and Scratchpad Registers vendor: Intel Corporation physical id: 8.1 bus info: pci@0000:00:08.1 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:2 UNCLAIMED description: System peripheral product: Core Processor System Control and Status Registers vendor: Intel Corporation physical id: 8.2 bus info: pci@0000:00:08.2 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:3 UNCLAIMED description: System peripheral product: Core Processor Miscellaneous Registers vendor: Intel Corporation physical id: 8.3 bus info: pci@0000:00:08.3 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:4 UNCLAIMED description: System peripheral product: Core Processor QPI Link vendor: Intel Corporation physical id: 10 bus info: pci@0000:00:10.0 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:5 UNCLAIMED description: System peripheral product: Core Processor QPI Routing and Protocol Registers vendor: Intel Corporation physical id: 10.1 bus info: pci@0000:00:10.1 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:55 memory:d4200000-d4203fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:3000(size=4096) memory:d3000000-d3ffffff ioport:d0000000(size=16777216) *-network description: Wireless interface product: Centrino Advanced-N 6200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 35 serial: 00:27:10:40:e4:68 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:54 memory:d3000000-d3001fff *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:2000(size=4096) memory:d2000000-d2ffffff ioport:d1000000(size=16777216) *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 60:eb:69:06:68:8f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=10.161.0.147 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:57 memory:d2000000-d203ffff ioport:2000(size=128) *-usb description: USB controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:20 memory:d4205800-d4205bff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a5 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: RAID bus controller product: 82801 Mobile SATA Controller [RAID mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:5048(size=8) ioport:5054(size=4) ioport:5040(size=8) ioport:5050(size=4) ioport:5020(size=32) memory:d4205000-d42057ff *-disk description: ATA Disk product: OCZ-VERTEX3 physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2.15 serial: OCZ-0350P6H316X5KUQE size: 223GiB (240GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000592dd *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: e741f18c-cfc5-4bce-b1e7-f80e517a3a22 size: 207GiB capacity: 207GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-06-15 06:49:27 filesystem=ext4 lastmountpoint=/ modified=2012-06-14 21:23:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-07-10 16:18:20 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 15GiB capacity: 15GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 15GiB capabilities: nofs *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d4205c00-d4205cff ioport:5000(size=32) *-pci:1 description: Host bridge product: Core Processor QuickPath Architecture Generic Non-Core Registers vendor: Intel Corporation physical id: 101 bus info: pci@0000:ff:00.0 version: 04 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Core Processor QuickPath Architecture System Address Decoder vendor: Intel Corporation physical id: 102 bus info: pci@0000:ff:00.1 version: 04 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Core Processor QPI Link 0 vendor: Intel Corporation physical id: 103 bus info: pci@0000:ff:02.0 version: 04 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Core Processor QPI Physical 0 vendor: Intel Corporation physical id: 104 bus info: pci@0000:ff:02.1 version: 04 width: 32 bits clock: 33MHz *-pci:5 description: Host bridge product: Core Processor Integrated Memory Controller vendor: Intel Corporation physical id: 105 bus info: pci@0000:ff:03.0 version: 04 width: 32 bits clock: 33MHz *-pci:6 description: Host bridge product: Core Processor Integrated Memory Controller Target Address Decoder vendor: Intel Corporation physical id: 106 bus info: pci@0000:ff:03.1 version: 04 width: 32 bits clock: 33MHz *-pci:7 description: Host bridge product: Core Processor Integrated Memory Controller Test Registers vendor: Intel Corporation physical id: 107 bus info: pci@0000:ff:03.4 version: 04 width: 32 bits clock: 33MHz *-pci:8 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Control Registers vendor: Intel Corporation physical id: 108 bus info: pci@0000:ff:04.0 version: 04 width: 32 bits clock: 33MHz *-pci:9 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Address Registers vendor: Intel Corporation physical id: 109 bus info: pci@0000:ff:04.1 version: 04 width: 32 bits clock: 33MHz *-pci:10 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Rank Registers vendor: Intel Corporation physical id: 10a bus info: pci@0000:ff:04.2 version: 04 width: 32 bits clock: 33MHz *-pci:11 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers vendor: Intel Corporation physical id: 10b bus info: pci@0000:ff:04.3 version: 04 width: 32 bits clock: 33MHz *-pci:12 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Control Registers vendor: Intel Corporation physical id: 10c bus info: pci@0000:ff:05.0 version: 04 width: 32 bits clock: 33MHz *-pci:13 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Address Registers vendor: Intel Corporation physical id: 10d bus info: pci@0000:ff:05.1 version: 04 width: 32 bits clock: 33MHz *-pci:14 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Rank Registers vendor: Intel Corporation physical id: 10e bus info: pci@0000:ff:05.2 version: 04 width: 32 bits clock: 33MHz *-pci:15 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers vendor: Intel Corporation physical id: 10f bus info: pci@0000:ff:05.3 version: 04 width: 32 bits clock: 33MHz *-battery description: Lithium Ion Battery product: NK06053 vendor: SMP-ATL24 physical id: 1 slot: Primary capacity: 4800mWh configuration: voltage=11.1V lspci: 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 1522 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d4000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd lsusb (with thumb drive plugged into USB3 port): Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 5986:01d0 Acer, Inc Bus 001 Device 004: ID 03f0:231d Hewlett-Packard

    Read the article

  • Best Practices - updated: which domain types should be used to run applications

    - by jsavit
    This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (formerly named Logical Domains). This is an updated and enlarged version of the post on this topic originally posted October 2012. One frequent question "what type of domain should I use to run applications?" There used to be a simple answer: "run applications in guest domains in almost all cases", but now there are more things to consider. Enhancements to Oracle VM Server for SPARC and introduction of systems like the current SPARC servers including the T4 and T5 systems, the Oracle SuperCluster T5-8 and Oracle SuperCluster M6-32 provide scale and performance much higher than the original servers that ran domains. Single-CPU performance, I/O capacity, memory sizes, are much larger now, and far more demanding applications are now being hosted in logical domains. The general advice continues to be "use guest domains in almost all cases", meaning, "use virtual I/O rather than physical I/O", unless there is a specific reason to use the other domain types. The sections below will discuss the criteria for choosing between domain types. Review: division of labor and types of domain Oracle VM Server for SPARC offloads management and I/O functionality from the hypervisor to domains (also called virtual machines), providing a modern alternative to older VM architectures that use a "thick", monolithic hypervisor. This permits a simpler hypervisor design, which enhances reliability, and security. It also reduces single points of failure by assigning responsibilities to multiple system components, further improving reliability and security. Oracle VM Server for SPARC defines the following types of domain, each with their own roles: Control domain - management control point for the server, runs the logical domain daemon and constraints engine, and is used to configure domains and manage resources. The control domain is the first domain to boot on a power-up, is always an I/O domain, and is usually a service domain as well. It doesn't have to be, but there's no reason to not leverage it for virtual I/O services. There is one control domain per T-series system, and one per Physical Domain (PDom) on an M5-32 or M6-32 system. M5 and M6 systems can be physically domained, with logical domains within the physical ones. I/O domain - a domain that has been assigned physical I/O devices. The devices may be one more more PCIe root complexes (in which case the domain is also called a root complex domain). The domain has native access to all the devices on the assigned PCIe buses. The devices can be any device type supported by Solaris on the hardware platform. a SR-IOV (Single-Root I/O Virtualization) function. SR-IOV lets a physical device (also called a physical function) or PF) be subdivided into multiple virtual functions (VFs) which can be individually assigned directly to domains. SR-IOV devices currently can be Ethernet or InfiniBand devices. direct I/O ownership of one or more PCI devices residing in a PCIe bus slot. The domain has direct access to the individual devices An I/O domain has native performance and functionality for the devices it owns, unmediated by any virtualization layer. It may also have virtual devices. Service domain - a domain that provides virtual network and disk devices to guest domains. The services are defined by commands that are run in the control domain. It usually is an I/O domain as well, in order for it to have devices to virtualize and serve out. Guest domain - a domain whose devices are all virtual rather than physical: virtual network and disk devices provided by one or more service domains. In common practice, this is where applications are run. Device considerations Consider the following when choosing between virtual devices and physical devices: Virtual devices provide the best flexibility - they can be dynamically added to and removed from a running domain, and you can have a large number of them up to a per-domain device limit. Virtual devices are compatible with live migration - domains that exclusively have virtual devices can be live migrated between servers supporting domains. On the other hand: Physical devices provide the best performance - in fact, native "bare metal" performance. Virtual devices approach physical device throughput and latency, especially with virtual network devices that can now saturate 10GbE links, but physical devices are still faster. Physical I/O devices do not add load to service domains - all the I/O goes directly from the I/O domain to the device, while virtual I/O goes through service domains, which must be provided sufficient CPU and memory capacity. Physical I/O devices can be other than network and disk - we virtualize network, disk, and serial console, but physical devices can be the wide range of attachable certified devices, including things like tape and CDROM/DVD devices. In some cases the lines are now blurred: virtual devices have better performance than previously: starting with Oracle VM Server for SPARC 3.1 there is near-native virtual network performance. There is more flexibility with physical devices than before: SR-IOV devices can now be dynamically reconfigured on domains. Tradeoffs one used to have to make are now relaxed: you can often have the flexibility of virtual I/O with performance that previously required physical I/O. You can have the performance and isolation of SR-IOV with the ability to dynamically reconfigure it, just like with virtual devices. Typical deployment A service domain is generally also an I/O domain: otherwise it wouldn't have access to physical device "backends" to offer to its clients. Similarly, an I/O domain is also typically a service domain in order to leverage the available PCI buses. Control domains must be I/O domains, because they boot up first on the server and require physical I/O. It's typical for the control domain to also be a service domain too so it doesn't "waste" the I/O resources it uses. A simple configuration consists of a control domain that is also the one I/O and service domain, and some number of guest domains using virtual I/O. In production, customers typically use multiple domains with I/O and service roles to eliminate single points of failure, as described in Availability Best Practices - Avoiding Single Points of Failure . Guest domains have virtual disk and virtual devices provisioned from more than one service domain, so failure of a service domain or I/O path or device does not result in an application outage. This also permits "rolling upgrades" in which service domains are upgraded one at a time while their guests continue to operate without disruption. (It should be noted that resiliency to I/O device failures can also be provided by the single control domain, using multi-path I/O) In this type of deployment, control, I/O, and service domains are used for virtualization infrastructure, while applications run in guest domains. Changing application deployment patterns The above model has been widely and successfully used, but more configuration options are available now. Servers got bigger than the original T2000 class machines with 2 I/O buses, so there is more I/O capacity that can be used for applications. Increased server capacity made it attractive to run more vertically-scaled applications, such as databases, with higher resource requirements than the "light" applications originally seen. This made it attractive to run applications in I/O domains so they could get bare-metal native I/O performance. This is leveraged by the Oracle SuperCluster engineered systems mentioned previously. In those engineered systems, I/O domains are used for high performance applications with native I/O performance for disk and network and optimized access to the Infiniband fabric. Another technical enhancement is Single Root I/O Virtualization (SR-IOV), which make it possible to give domains direct connections and native I/O performance for selected I/O devices. Not all I/O domains own PCI complexes, and there are increasingly more I/O domains that are not service domains. They use their I/O connectivity for performance for their own applications. However, there are some limitations and considerations: at this time, a domain using physical I/O cannot be live-migrated to another server. There is also a need to plan for security and introducing unneeded dependencies: if an I/O domain is also a service domain providing virtual I/O to guests, it has the ability to affect the correct operation of its client guest domains. This is even more relevant for the control domain. where the ldm command must be protected from unauthorized (or even mistaken) use that would affect other domains. As a general rule, running applications in the service domain or the control domain should be avoided. For reference, an excellent guide to secure deployment of domains by Stefan Hinker is at Secure Deployment of Oracle VM Server for SPARC. To recap: Guest domains with virtual I/O still provide the greatest operational flexibility, including features like live migration. They should be considered the default domain type to use unless there is a specific requirement that mandates an I/O domain. I/O domains can be used for applications with the highest performance requirements. Single Root I/O Virtualization (SR-IOV) makes this more attractive by giving direct I/O access to more domains, and by permitting dynamic reconfiguration of SR-IOV devices. Today's larger systems provide multiple PCIe buses - for example, 16 buses on the T5-8 - making it possible to configure multiple I/O domains each owning their own bus. Service domains should in general not be used for applications, because compromised security in the domain, or an outage, can affect domains that depend on it. This concern can be mitigated by providing guests' their virtual I/O from more than one service domain, so interruption of service in one service domain does not cause an application outage. The control domain should in general not be used to run applications, for the same reason. Oracle SuperCluster uses the control domain for applications, but it is an exception. It's not a general purpose environment; it's an engineered system with specifically configured applications and optimization for optimal performance. These are recommended "best practices" based on conversations with a number of Oracle architects. Keep in mind that "one size does not fit all", so you should evaluate these practices in the context of your own requirements. Summary Higher capacity servers that run Oracle VM Server for SPARC are attractive for applications with the most demanding resource requirements. New deployment models permit native I/O performance for demanding applications by running them in I/O domains with direct access to their devices. This is leveraged in SPARC SuperCluster, and can be leveraged in T-series servers to provision high-performance applications running in domains. Carefully planned, this can be used to provide peak performance for critical applications. That said, the improved virtual device performance in Oracle VM Server means that the default choice should still be guest domains with virtual I/O.

    Read the article

  • CodePlex Daily Summary for Monday, June 20, 2011

    CodePlex Daily Summary for Monday, June 20, 2011Popular ReleasesBlogEngine.NET: BlogEngine.NET 2.5 RC: BlogEngine.NET Hosting - Click Here! 3 Months FREE – BlogEngine.NET Hosting – Click Here! This is a Release Candidate version for BlogEngine.NET 2.5. The most current, stable version of BlogEngine.NET is version 2.0. Find out more about the BlogEngine.NET 2.5 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. Also, please note at this time the Mercurial source code repository on the Source Code tab is having issues, but will be fixed shortly. I...Microsoft All-In-One Code Framework - a centralized code sample library: All-In-One Code Framework 2011-06-19: Alternatively, you can install Sample Browser or Sample Browser VS extension, and download the code samples from Sample Browser. Improved and Newly Added Examples:For an up-to-date code sample index, please refer to All-In-One Code Framework Sample Catalog. NEW Samples for Windows Azure Sample Description Owner CSAzureStartupTask The sample demonstrates using the startup tasks to install the prerequisites or to modify configuration settings for your environment in Windows Azure Rafe Wu ...Facebook C# SDK: 5.0.40: This is a RTW release which adds new features to v5.0.26 RTW. Support for multiple FacebookMediaObjects in one request. Allow FacebookMediaObjects in batch requests. Removes support for Cassini WebServer (visual studio inbuilt web server). Better support for unit testing and mocking. updated SimpleJson to v0.6 Refer to CHANGES.txt for details. For more information about this release see the following blog posts: Facebook C# SDK - Multiple file uploads in Batch Requests Faceb...Candescent NUI: Candescent NUI (7774): This is the binary version of the source code in change set 7774.Media Companion: MC 3.408b weekly: Some minor fixes..... Fixed messagebox coming up during batch scrape Added <originaltitle></originaltitle> to movie nfo's - when a new movie is scraped, the original title will be set as the returned title. The end user can of course change the title in MC, however the original title will not change. The original title can be seen by hovering over the movie title in the right pane of the main movie tab. To update all of your current nfo's to add the original title the same as your current ...NLog - Advanced .NET Logging: NLog 2.0 Release Candidate: Release notes for NLog 2.0 RC can be found at http://nlog-project.org/nlog-2-rc-release-notesGendering Add-In for Microsoft Office Word 2010: Gendering Add-In: This is the first stable Version of the Gendering Add-In. Unzip the package and start "setup.exe". The .reg file shows how to config an alternate path for suggestion table.TerrariViewer: TerrariViewer v3.1 [Terraria Inventory Editor]: This version adds tool tips. Almost every picture box you mouse over will tell you what item is in that box. I have also cleaned up the GUI a little more to make things easier on my end. There are various bug fixes including ones associated with opening different characters in the same instance of the program. As always, please bring any bugs you find to my attention.Kinect Paint: KinectPaint V1.0: This is version 1.0 of Kinect Paint. To run it, follow the steps: Install the Kinect SDK for Windows (available at http://research.microsoft.com/en-us/um/redmond/projects/kinectsdk/download.aspx) Connect your Kinect device to the computer and to the power. Download the Zip file. Unblock the Zip file by right clicking on it, and pressing the Unblock button in the file properties (if available). Extract the content of the Zip file. Run KinectPaint.exe.CommonLibrary.NET: CommonLibrary.NET - 0.9.7 Beta: A collection of very reusable code and components in C# 3.5 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. Samples in <root>\src\Lib\CommonLibrary.NET\Samples CommonLibrary.NET 0.9.7Documentation 6738 6503 New 6535 Enhancements 6583 6737DropBox Linker: DropBox Linker 1.2: Public sub-folders are now monitored for changes as well (thanks to mcm69) Automatic public sync folder detection (thanks to mcm69) Non-Latin and special characters encoded correctly in URLs Pop-ups are now slot-based (use first free slot and will never be overlapped — test it while previewing timeout) Public sync folder setting is hidden when auto-detected Timeout interval is displayed in popup previews A lot of major and minor code refactoring performed .NET Framework 4.0 Client...Terraria World Viewer: Version 1.3.1: Update June 20th Removed "Draw Markers" checkbox from main window because of redundancy/confusing. (Select all or no items from the Settings tab for the same effect.) Fixed Marker preferences not being saved. It is now possible to render more than one map without having to restart the application. World file will not be locked while the world is being rendered. Note: The World Viewer might render an inaccurate map or even crash if Terraria decides to modify the World file during the pro...MVC Controls Toolkit: Mvc Controls Toolkit 1.1.5 RC: Added Extended Dropdown allows a prompt item to be inserted as first element. RequiredAttribute, if present, trggers if no element is chosen Client side javascript function to set/get the values of DateTimeInput, TypedTextBox, TypedEditDisplay, and to bind/unbind a "change" handler The selected page in the pager is applied the attribute selected-page="selected" that can be used in the definition of CSS rules to style the selected page items controls now interpret a null value as an empr...Umbraco CMS: Umbraco CMS 5.0 CTP 1: Umbraco 5 Community Technology Preview Umbraco 5 will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out our first CTP of version 5 today! If you're new to Umbraco and would like to get a quick low-down on our popular and easy-to-learn approach to content management, check out our intro video here. What's in the v5 CTP box? This is a preview version of version 5 and includes support for the following familiar Umbr...Ribbon Browser for Microsoft Dynamics CRM 2011: Ribbon Browser (1.0.514.30): Initial releaseCoding4Fun Kinect Toolkit: Coding4Fun.Kinect Toolkit: Version 1.0Kinect Mouse Cursor: Kinect Mouse Cursor v1.0: The initial release of the Kinect Mouse Cursor project!patterns & practices: Project Silk: Project Silk Community Drop 11 - June 14, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Client Data Management and Caching" chapter. Updated "Application Notifications" chapter. Updated "Architecture" chapter. Updated "jQuery UI Widget" chapter. Updated "Widget QuickStart" appendix and code. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separat...Orchard Project: Orchard 1.2: Build: 1.2.41 Published: 6/14/2010 How to Install Orchard To install Orchard using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard.ashx. Web PI will detect your hardware environment and install the application. Alternatively, to install the release manually, download the Orchard.Web.1.2.41.zip file. http://orchardproject.net/docs/Manually-installing-Orchard-zip-file.ashx The zip contents are pre-built and ready-to-run. Simply extract the contents o...Snippet Designer: Snippet Designer 1.4.0: Snippet Designer 1.4.0 for Visual Studio 2010 Change logSnippet Explorer ChangesReworked language filter UI to work better in the side bar. Added result count drop down which lets you choose how many results to see. Language filter and result count choices are persisted after Visual Studio is closed. Added file name to search criteria. Search is now case insensitive. Snippet Editor Changes Snippet Editor ChangesAdded menu option for the $end$ symbol which indicates where the c...New Projects.NET Dev Tools Dashboard: .NET Dev Tools Dashboard is a WPF application that implements the Prism 4 standards. Modules can be added at runtime and after install of the base Dashboard shell. The first module is a WPF Gui for NAnt based on Colin Svingen's Gui for NAnt open source app for Windows Forms.Chutzpah - A JavaScript Test Runner: Chutzpah helps you integrate JavaScript unit testing into your website. It enables you to run JavaScript unit tests from the command line and from inside of Visual Studio. It also supports running in the TeamCity continuous integration server.Cow connect: Ziel des Projektes Cow connect, ist es ein Tool zu schrieben das Verschiedene Datenbanken, unterschiedlicher Herdenmanagement Tool z.b: Helm Multikuh, Westfalia C21, Holdi,…. Synchron zu halten. oder eine neue Datenbank zu GenerrierenCqrs CWDNUG Demo: A very simple CQRS demo for a presentation at the Canary Wharf Dot Net User Group. Uses Ncqrs, ASP.NET MVC 3. Not best practices - just something to get your teeth into if you're new to CQRS and Event Sourcing.Down123: down123EssionCalendar: EssionCal EssionCalGuardian: Protects reference type parameters and return values from NULL values.Honest Flex Time Management System: A Japanese time management system to handle worker hourlies. Will include some basic reporting functions as well.iStatServer.NET: Server implementation for iPhone iStat app. Windows analogue to iStat Server on OS x or iStatd on linux/solaris. Keolis Service Wrapper: Keolis Service WrapperKinectContrib: A set of extensions and helpers that will facilitate the use of the Microsoft Kinect motion sensor with the Kinect SDK.kingdomwp7: kingdomwp7Laboratório de Engenharia de Software - Projeto: Criado para estudar e aplicar novas tecnologias web.Multi Touch Digit OCR With Matlab Neural Network Wpf Project: Multi Touch Digit OCR Project is a wpf project that works on multi touch devices but it works well on normal devices , this project uses matlab core , that creates 4 feed forward neural network and train them with Back Propagation Algorithm for detecting numbers that you draw .PhoneGap Extensions - Alpha Version: This project was created to solve some issues about PhoneGap. The first issue to solve is how to reuse HTML code through include files. SABnzbd UI: This application is a Windows 7 enabled UI for SABnzbd, so that you don't have to navigate to the website, but instead you can view a slick UI on your desktop.SP:Social: A community project for providing integration points between SharePoint and other social networks like Facebook, LinkedIn, Live etc.Whisk: An extremely simplistic but cross-platform network rending environment for Blender.Windows phone 7, Game framewok: Windows phone 7, Game framewokWP7 - Multi Select Wrapped ListBox: Its a WP 7.1 project which contains a list box that can wrap listBoxItems and can scroll vertically.

    Read the article

  • What's up with LDoms: Part 1 - Introduction & Basic Concepts

    - by Stefan Hinker
    LDoms - the correct name is Oracle VM Server for SPARC - have been around for quite a while now.  But to my surprise, I get more and more requests to explain how they work or to give advise on how to make good use of them.  This made me think that writing up a few articles discussing the different features would be a good idea.  Now - I don't intend to rewrite the LDoms Admin Guide or to copy and reformat the (hopefully) well known "Beginners Guide to LDoms" by Tony Shoumack from 2007.  Those documents are very recommendable - especially the Beginners Guide, although based on LDoms 1.0, is still a good place to begin with.  However, LDoms have come a long way since then, and I hope to contribute to their adoption by discussing how they work and what features there are today.  In this and the following posts, I will use the term "LDoms" as a common abbreviation for Oracle VM Server for SPARC, just because it's a lot shorter and easier to type (and presumably, read). So, just to get everyone on the same baseline, lets briefly discuss the basic concepts of virtualization with LDoms.  LDoms make use of a hypervisor as a layer of abstraction between real, physical hardware and virtual hardware.  This virtual hardware is then used to create a number of guest systems which each behave very similar to a system running on bare metal:  Each has its own OBP, each will install its own copy of the Solaris OS and each will see a certain amount of CPU, memory, disk and network resources available to it.  Unlike some other type 1 hypervisors running on x86 hardware, the SPARC hypervisor is embedded in the system firmware and makes use both of supporting functions in the sun4v SPARC instruction set as well as the overall CPU architecture to fulfill its function. The CMT architecture of the supporting CPUs (T1 through T4) provide a large number of cores and threads to the OS.  For example, the current T4 CPU has eight cores, each running 8 threads, for a total of 64 threads per socket.  To the OS, this looks like 64 CPUs.  The SPARC hypervisor, when creating guest systems, simply assigns a certain number of these threads exclusively to one guest, thus avoiding the overhead of having to schedule OS threads to CPUs, as do typical x86 hypervisors.  The hypervisor only assigns CPUs and then steps aside.  It is not involved in the actual work being dispatched from the OS to the CPU, all it does is maintain isolation between different guests. Likewise, memory is assigned exclusively to individual guests.  Here,  the hypervisor provides generic mappings between the physical hardware addresses and the guest's views on memory.  Again, the hypervisor is not involved in the actual memory access, it only maintains isolation between guests. During the inital setup of a system with LDoms, you start with one special domain, called the Control Domain.  Initially, this domain owns all the hardware available in the system, including all CPUs, all RAM and all IO resources.  If you'd be running the system un-virtualized, this would be what you'd be working with.  To allow for guests, you first resize this initial domain (also called a primary domain in LDoms speak), assigning it a small amount of CPU and memory.  This frees up most of the available CPU and memory resources for guest domains.  IO is a little more complex, but very straightforward.  When LDoms 1.0 first came out, the only way to provide IO to guest systems was to create virtual disk and network services and attach guests to these services.  In the meantime, several different ways to connect guest domains to IO have been developed, the most recent one being SR-IOV support for network devices released in version 2.2 of Oracle VM Server for SPARC. I will cover these more advanced features in detail later.  For now, lets have a short look at the initial way IO was virtualized in LDoms: For virtualized IO, you create two services, one "Virtual Disk Service" or vds, and one "Virtual Switch" or vswitch.  You can, of course, also create more of these, but that's more advanced than I want to cover in this introduction.  These IO services now connect real, physical IO resources like a disk LUN or a networt port to the virtual devices that are assigned to guest domains.  For disk IO, the normal case would be to connect a physical LUN (or some other storage option that I'll discuss later) to one specific guest.  That guest would be assigned a virtual disk, which would appear to be just like a real LUN to the guest, while the IO is actually routed through the virtual disk service down to the physical device.  For network, the vswitch acts very much like a real, physical ethernet switch - you connect one physical port to it for outside connectivity and define one or more connections per guest, just like you would plug cables between a real switch and a real system. For completeness, there is another service that provides console access to guest domains which mimics the behavior of serial terminal servers. The connections between the virtual devices on the guest's side and the virtual IO services in the primary domain are created by the hypervisor.  It uses so called "Logical Domain Channels" or LDCs to create point-to-point connections between all of these devices and services.  These LDCs work very similar to high speed serial connections and are configured automatically whenever the Control Domain adds or removes virtual IO. To see all this in action, now lets look at a first example.  I will start with a newly installed machine and configure the control domain so that it's ready to create guest systems. In a first step, after we've installed the software, let's start the virtual console service and downsize the primary domain.  root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-c-- UART 512 261632M 0.3% 2d 13h 58m root@sun # ldm add-vconscon port-range=5000-5100 \ primary-console primary root@sun # svcadm enable vntsd root@sun # svcs vntsd STATE STIME FMRI online 9:53:21 svc:/ldoms/vntsd:default root@sun # ldm set-vcpu 16 primary root@sun # ldm set-mau 1 primary root@sun # ldm start-reconf primary root@sun # ldm set-memory 7680m primary root@sun # ldm add-config initial root@sun # shutdown -y -g0 -i6 So what have I done: I've defined a range of ports (5000-5100) for the virtual network terminal service and then started that service.  The vnts will later provide console connections to guest systems, very much like serial NTS's do in the physical world. Next, I assigned 16 vCPUs (on this platform, a T3-4, that's two cores) to the primary domain, freeing the rest up for future guest systems.  I also assigned one MAU to this domain.  A MAU is a crypto unit in the T3 CPU.  These need to be explicitly assigned to domains, just like CPU or memory.  (This is no longer the case with T4 systems, where crypto is always available everywhere.) Before I reassigned the memory, I started what's called a "delayed reconfiguration" session.  That avoids actually doing the change right away, which would take a considerable amount of time in this case.  Instead, I'll need to reboot once I'm all done.  I've assigned 7680MB of RAM to the primary.  That's 8GB less the 512MB which the hypervisor uses for it's own private purposes.  You can, depending on your needs, work with less.  I'll spend a dedicated article on sizing, discussing the pros and cons in detail. Finally, just before the reboot, I saved my work on the ILOM, to make this configuration available after a powercycle of the box.  (It'll always be available after a simple reboot, but the ILOM needs to know the configuration of the hypervisor after a power-cycle, before the primary domain is booted.) Now, lets create a first disk service and a first virtual switch which is connected to the physical network device igb2. We will later use these to connect virtual disks and virtual network ports of our guest systems to real world storage and network. root@sun # ldm add-vds primary-vds root@sun # ldm add-vswitch net-dev=igb2 switch-primary primary You are free to choose whatever names you like for the virtual disk service and the virtual switch.  I strongly recommend that you choose names that make sense to you and describe the function of each service in the context of your implementation.  For the vswitch, for example, you could choose names like "admin-vswitch" or "production-network" etc. This already concludes the configuration of the control domain.  We've freed up considerable amounts of CPU and RAM for guest systems and created the necessary infrastructure - console, vts and vswitch - so that guests systems can actually interact with the outside world.  The system is now ready to create guests, which I'll describe in the next section. For further reading, here are some recommendable links: The LDoms 2.2 Admin Guide The "Beginners Guide to LDoms" The LDoms Information Center on MOS LDoms on OTN

    Read the article

  • Drivers for NVIDIA 520M not working in Ubuntu 12.04

    - by Don
    I am aware that this is nominally a duplicate question, however I've read the other questions and haven't been able to resolve my problem after many hours and attempts, so please don't delete it. Additionally, it seems like many answers to the other questions are specifically dependent on certain situations. My situation being different from the others I found represented, here's my question. Until last night, I had Ubuntu 12.04 installed with Wubi, and it ran ok, though slowly and with occasional hangs. So I partitioned the drive and installed 12.04 in its own partition. Now when I start it, I am stuck using 2D. I believe this is an NVIDIA bug. My NVIDIA card is a GT 520M and my machine has Optimus. Additional Drivers only displays my wireless driver. Going to System Settings Details Graphics shows Driver:Unknown, Experience:Standard. I downloaded the driver from the NVIDIA website, and ran the installer with no errors, except that the "distribution-provided pre-install script failed". After rebooting, my screen was stuck at 640X480, which was fixed by editing /etc/X11/xorg.conf However, I still was stuck in 2D, and nothing else had changed either. A thread suggested something called Bumblebee. I tried that, and when I ran optirun firefoxI got a frozen blank screen. Following another suggestion, I checked the BIOS to try and disable Optimus. I found and ran myriad other commands to try and fix the problem and nothing changed. Now I have just done a clean re-install of Ubuntu. From there, I: Installed all the updates Downloaded the NVIDIA driver Installed it Got screen stuck at 640X480, fixed in xorg.conf. To recap the problem: I can't get the NVIDIA drivers working I am stuck using 2D I'm an idiot I think if the first one is solved, the solution to the second will naturally follow. If you need me to provide any other information, I'd be happy to. From what I've seen in other threads, I think this information may help: lsmod: dh@donsMachine:~$ lsmod Module Size Used by nvidia 12353161 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event lib80211_crypt_tkip 17390 0 wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 87692 0 serio_raw 13211 0 i915 468745 2 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 drm 242038 3 i915,drm_kms_helper mei 41616 0 i2c_algo_bit 13423 1 i915 mxm_wmi 12979 0 acer_wmi 28418 0 sparse_keymap 13890 1 acer_wmi video 19596 1 i915 wmi 19256 2 mxm_wmi,acer_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp tg3 152032 0 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci lspci -nn | grep VGA dh@donsMachine:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0df7] (rev a1) lshw dh@donsMachine:~$ sudo lshw [sudo] password for dh: donsmachine description: Notebook product: EasyNote TS44HR () vendor: Packard Bell version: V1.12 serial: LXBWZ02017134209D71601 width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook uuid=16FE576B-CA15-11E0-B096-B870F4E51243 *-core description: Motherboard product: SJV50_HR vendor: Packard Bell physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Packard Bell physical id: 0 version: V1.12 date: 07/11/2011 size: 1MiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 0 serial: 598E126E slot: ChannelA-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] physical id: 1 slot: ChannelA-DIMM1 *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 2 serial: 159E126C slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: DIMM [empty] physical id: 3 slot: ChannelB-DIMM1 *-cpu description: CPU product: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz vendor: Intel Corp. physical id: 2e bus info: cpu@0 version: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz slot: CPU1 size: 2GHz capacity: 4GHz width: 64 bits clock: 1333MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 30 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache:1 description: L2 cache physical id: 31 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L3 cache physical id: 32 slot: L3 Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-through unified *-cache description: L1 cache physical id: 2f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:d0000000-d10fffff ioport:a0000000(size=301989888) *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) memory:d1000000-d107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:d1400000-d17fffff memory:c0000000-cfffffff ioport:3000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:42 memory:d1a04000-d1a0400f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:d1a0a000-d1a0a3ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d1a00000-d1a03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:9fb00000-9fbfffff ioport:d1800000(size=1048576) *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: b8:70:f4:e5:12:43 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb latency=0 link=no multicast=yes port=twisted pair resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff *-generic:0 description: SD Host controller product: NetXtreme BCM57765 Memory Card Reader vendor: Broadcom Corporation physical id: 0.1 bus info: pci@0000:02:00.1 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:17 memory:d1800000-d180ffff *-generic:1 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.2 bus info: pci@0000:02:00.2 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1810000-d181ffff *-generic:2 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.3 bus info: pci@0000:02:00.3 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1820000-d182ffff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d1900000-d19fffff *-network description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 68:a3:c4:44:81:96 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.12 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d1900000-d1903fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:d1a09000-d1a093ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:3098(size=8) ioport:30bc(size=4) ioport:3090(size=8) ioport:30b8(size=4) ioport:3060(size=32) memory:d1a08000-d1a087ff *-disk description: ATA Disk product: ST9500325AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0001 serial: S2W1AMSX size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=a45f21e9 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 46aa-2a25 size: 19GiB capacity: 20GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:00 filesystem=ntfs label=PQSERVICE state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 10aa-ad1a size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=SYSTEM RESERVED state=clean *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 668c5afc-182e-ff4b-b084-3cc09f54972d size: 395GiB capacity: 395GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=Don's Machine state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 49GiB capacity: 49GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 3945MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RW DVRTD11RS vendor: PIONEER physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d1a06000-d1a060ff ioport:3040(size=32) *-power UNCLAIMED description: OEM_Define1 product: OEM_Define5 vendor: OEM_Define2 physical id: 1 version: OEM_Define6 serial: OEM_Define3 capacity: 75mWh *-battery description: Lithium Ion Battery product: CRB Battery 0 vendor: -Virtual Battery 0- physical id: 2 version: 10/12/2007 serial: Battery 0 slot: Fake

    Read the article

  • Issue 15: SVP Focus

    - by rituchhibber
         SVP FOCUS FOCUS -- Chris Baker SVP Oracle Worldwide ISV-OEM-Java Sales Chris Baker is the Global Head of ISV/OEM Sales responsible for working with ISV/OEM partners to maximise Oracle's business through those partners, whilst maximising those partners’ business to their end users. Chris works with partners, customers, innovators, investors and employees to develop innovative business solutions using Oracle products, services and skills. RESOURCES -- Oracle PartnerNetwork (OPN) OPN Solutions Catalog Oracle Exastack Program Oracle Exastack Optimized Oracle Cloud Computing Oracle Engineered Systems Oracle and Java SUBSCRIBE FEEDBACK PREVIOUS ISSUES "By taking part in marketing activities, our partners accelerate their sales cycles." -- Firstly, could you please explain Oracle's current strategy for ISV partners, globally and in EMEA? Oracle customers use independent software vendor (ISV) applications to run their businesses. They use them to generate revenue and to fulfil obligations to their own customers. Our strategy is very straight-forward. We want all of our ISV partners and OEMs to concentrate on the things that they do the best—building applications to meet the unique industry and functional requirements of their customer. We want to ensure that we deliver a best-in-class application platform so ISVs are free to concentrate their effort on their application functionality and user experience We invest over four billion dollars in research and development every year, and we want our ISVs to benefit from all of that investment in operating systems, virtualisation, databases, middleware, engineered systems, and other hardware. By doing this, we help them to reduce their costs, gain more consistency and agility for quicker implementations, and also rapidly differentiate themselves from other application vendors. It's all about simplification because we believe that around 25 to 30 percent of the development costs incurred by many ISVs are caused by customising infrastructure and have nothing to do with their applications. Our strategy is to enable our ISV partners to standardise their application platform using engineered architecture, so they can write once to the Oracle stack and deploy seamlessly in the cloud, on-premise, or in hybrid deployments. It's really important that architecture is the same in order to keep cost and time overheads at a minimum, so we provide standardisation and an environment that enables our ISVs to concentrate on the core business that makes them the most money and brings them success. How do you believe this strategy is helping the ISVs to work hand-in-hand with Oracle to ensure that end customers get the industry-leading solutions that they need? We work with our ISVs not just to help them be successful, but also to help them market themselves. We have something called the 'Oracle Exastack Ready Program', which enables ISVs to publicise themselves as 'Ready' to run the core software platforms that run on Oracle's engineered systems including Exadata and Exalogic. So, for example, they can become 'Database Ready' which means that they use the latest version of Oracle Database and therefore can run their application without modification on Exadata or the Oracle Database Appliance. Alternatively, they can become WebLogic Ready, Oracle Linux Ready and Oracle Solaris Ready which means they run on the latest release and therefore can run their application, with no new porting work, on Oracle Exalogic. Those 'Ready' logos are important in helping ISVs advertise to their customers that they are using the latest technologies which have been fully tested. We now also have Exadata Ready and Exalogic Ready programmes which allow ISVs to promote the certification of their applications on these platforms. This highlights these partners to Oracle customers as having solutions that run fluently on the Oracle Exadata Database Machine, the Oracle Exalogic Elastic Cloud or one of our other engineered systems. This makes it easy for customers to identify solutions and provides ISVs with an avenue to connect with Oracle customers who are rapidly adopting engineered systems. We have also taken this programme to the next level in the shape of 'Oracle Exastack Optimized' for partners whose applications run best on the Oracle stack and have invested the time to fully optimise application performance. We ensure that Exastack Optimized partner status is promoted and supported by press releases, and we help our ISVs go to market and differentiate themselves through the use of our technology and the standardisation it delivers. To date we have had several hundred organisations successfully work through our Exastack Optimized programme. How does Oracle's strategy of offering pre-integrated open platform software and hardware allow ISVs to bring their products to market more quickly? One of the problems for many ISVs is that they have to think very carefully about the technology on which their solutions will be deployed, particularly in the cloud or hosted environments. They have to think hard about how they secure these environments, whether the concern is, for example, middleware, identity management, or securing personal data. If they don't use the technology that we build-in to our products to help them to fulfil these roles, they then have to build it themselves. This takes time, requires testing, and must be maintained. By taking advantage of our technology, partners will now know that they have a standard platform. They will know that they can confidently talk about implementation being the same every time they do it. Very large ISV applications could once take a year or two to be implemented at an on-premise environment. But it wasn't just the configuration of the application that took the time, it was actually the infrastructure - the different hardware configurations, operating systems and configurations of databases and middleware. Now we strongly believe that it's all about standardisation and repeatability. It's about making sure that our partners can do it once and are then able to roll it out many different times using standard componentry. What actions would you recommend for existing ISV partners that are looking to do more business with Oracle and its customer base, not only to maximise benefits, but also to maximise partner relationships? My team, around the world and in the EMEA region, is available and ready to talk to any of our ISVs and to explore the possibilities together. We run programmes like 'Excite' and 'Insight' to help us to understand how we can help ISVs with architecture and widen their environments. But we also want to work with, and look at, new opportunities - for example, the Machine-to-Machine (M2M) market or 'The Internet of Things'. Over the next few years, many millions, indeed billions of devices will be collecting massive amounts of data and communicating it back to the central systems where ISVs will be running their applications. The only way that our partners will be able to provide a single vendor 'end-to-end' solution is to use Oracle integrated systems at the back end and Java on the 'smart' devices collecting the data—a complete solution from device to data centre. So there are huge opportunities to work closely with our ISVs, using Oracle's complete M2M platform, to provide the infrastructure that enables them to extract maximum value from the data collected. If any partners don't know where to start or who to contact, then they can contact me directly at [email protected] or indeed any of our teams across the EMEA region. We want to work with ISVs to help them to be as successful as they possibly can through simplification and speed to market, and we also want all of the top ISVs in the world based on Oracle. What opportunities are immediately opened to new ISV partners joining the OPN? As you know OPN is very, very important. New members will discover a huge amount of content that instantly becomes accessible to them. They can access a wealth of no-cost training and enablement materials to build their expertise in Oracle technology. They can download Oracle software and use it for development projects. They can help themselves become more competent by becoming part of a true community and uncovering new opportunities by working with Oracle and their peers in the Oracle Partner Network. As well as publishing massive amounts of information on OPN, we also hold our global Oracle OpenWorld event, at which partners play a huge role. This takes place at the end of September and the beginning of October in San Francisco. Attending ISV partners have an unrivalled opportunity to contribute to elements such as the OpenWorld / OPN Exchange, at which they can talk to other partners and really begin thinking about how they can move their businesses on and play key roles in a very large ecosystem which revolves around technology and standardisation. Finally, are there any other messages that you would like to share with the Oracle ISV community? The crucial message that I always like to reinforce is architecture, architecture and architecture! The key opportunities that ISVs have today revolve around standardising their architectures so that they can confidently think: "I will I be able to do exactly the same thing whenever a customer is looking to deploy on-premise, hosted or in the cloud". The right architecture is critical to being competitive and to really start changing the game. We want to help our ISV partners to do just that; to establish standard architecture and to seize the opportunities it opens up for them. New market opportunities like M2M are enormous - just look at how many devices are all around you right now. We can help our partners to interface with these devices more effectively while thinking about their entire ecosystem, rather than just the piece that they have traditionally focused upon. With standardised architecture, we can help people dramatically improve their speed, reach, agility and delivery of enhanced customer satisfaction and value all the way from the Java side to their centralised systems. All Oracle ISV partners must take advantage of these opportunities, which is why Oracle will continue to invest in and support them. Oracle OpenWorld 2010 Whether you attended Oracle OpenWorld 2009 or not, don't forget to save the date now for Oracle OpenWorld 2010. The event will be held a little earlier next year, from 19th-23rd September, so please don't miss out. With thousands of sessions and hundreds of exhibits and demos already lined up, there's no better place to learn how to optimise your existing systems, get an inside line on upcoming technology breakthroughs, and meet with your partner peers, Oracle strategists and even the developers responsible for the products and services that help you get better results for your end customers. Register Now for Oracle OpenWorld 2010! Perhaps you are interested in learning more about Oracle OpenWorld 2010, but don't wish to register at this time? Great! Please just enter your contact information here and we will contact you at a later date. How to Exhibit at Oracle OpenWorld 2010 Sponsorship Opportunities at Oracle OpenWorld 2010 Advertising Opportunities at Oracle OpenWorld 2010 -- Back to the welcome page

    Read the article

  • Ubuntu 12.04 + Raid0 + Windows 7 not loading

    - by Douglas
    please someone help me.... (Sorry for my english) Hi, I have a Pc with 2 Hd (1Tb each) on Raid0. I had a Windows 7 64bits working for several months. When I installed the Windows I let a 100Gb partition empty to install Ubuntu someday. I was using Linux on a Virtualbox, but this week I tried to install Ubuntu 12.04 in this 100Gb partition. I used the Ubuntu alternate cd, because the 'normal' cd was giving me trouble with the Raid0. The grub installation always reported a error. After a lot of work I found that I nedded to install grub on partition /dev/mapper/isw_chjbfeec_DougRaid1 (see Bootinfo below). The Windows installation created a 100Mb boot partition, so I needed to install grub in this partition. Now I have the Ubuntu working 100% ok. The problem is, the Windows is not booting! The windows option is present on the grub menu, but when I choose the windows option there is a black screen and after that the grub is reloaded. My Bootinfo is: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for /boot/grub. => Grub2 (v1.99) is installed in the MBR of /dev/mapper/isw_chjbfeec_DougRaid and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for /boot/grub. sda1: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' mount: unknown filesystem type '' sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: isw_chjbfeec_DougRaid1: ________________________________________________________ File system: ntfs Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of isw_chjbfeec_DougRaid1 and looks at sector 3841862992 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. No errors found in the Boot Parameter Block. Operating System: Boot files: /grldr /bootmgr /Boot/BCD /grldr isw_chjbfeec_DougRaid2: ________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe isw_chjbfeec_DougRaid3: ________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: isw_chjbfeec_DougRaid5: ________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img isw_chjbfeec_DougRaid6: ________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 206,848 3,686,402,047 3,686,195,200 7 NTFS / exFAT / HPFS /dev/sda3 3,686,402,558 3,907,039,743 220,637,186 5 Extended Invalid MBR Signature found. EBR refers to a location outside the hard drive. /dev/sda2 ends after the last sector of /dev/sda /dev/sda3 ends after the last sector of /dev/sda Drive: isw_chjbfeec_DougRaid _____________________________________________________________________ Disk /dev/mapper/isw_chjbfeec_DougRaid: 2000.4 GB, 2000404348928 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907039744 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/mapper/isw_chjbfeec_DougRaid1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/mapper/isw_chjbfeec_DougRaid2 206,848 3,686,402,047 3,686,195,200 7 NTFS / exFAT / HPFS /dev/mapper/isw_chjbfeec_DougRaid3 3,686,402,558 3,907,039,743 220,637,186 5 Extended /dev/mapper/isw_chjbfeec_DougRaid5 3,686,402,560 3,881,876,479 195,473,920 83 Linux /dev/mapper/isw_chjbfeec_DougRaid6 3,881,876,992 3,907,039,743 25,162,752 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/mapper/isw_chjbfeec_DougRaid1 C89C73D19C73B910 ntfs Reservado pelo Sistema /dev/mapper/isw_chjbfeec_DougRaid2 6830883A3088116C ntfs /dev/mapper/isw_chjbfeec_DougRaid5 bbab868a-ea53-4be3-ba7d-2737fe6cb24c ext4 /dev/mapper/isw_chjbfeec_DougRaid6 7a830a3c-88fb-4cba-80dc-f32e08abfd5b swap /dev/sda isw_raid_member /dev/sdb isw_raid_member /dev/sr0 iso9660 Windows7x86x64SK ========================= "ls -R /dev/mapper/" output: ========================= /dev/mapper: control isw_chjbfeec_DougRaid isw_chjbfeec_DougRaid1 isw_chjbfeec_DougRaid2 isw_chjbfeec_DougRaid3 isw_chjbfeec_DougRaid5 isw_chjbfeec_DougRaid6 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/mapper/isw_chjbfeec_DougRaid5 / ext4 (rw,errors=remount-ro) /dev/sr0 /media/Windows7x86x64SK iso9660 (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks) ================= isw_chjbfeec_DougRaid1/grldr embedded menu: ================== -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ================== isw_chjbfeec_DougRaid5/boot/grub/grub.cfg: ================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-24-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux /boot/vmlinuz-3.2.0-24-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-24-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c echo 'Loading Linux 3.2.0-24-generic-pae ...' linux /boot/vmlinuz-3.2.0-24-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic-pae } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c echo 'Loading Linux 3.2.0-23-generic-pae ...' linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic-pae } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober_proxy ### menuentry "Windows 7 (loader) (on /dev/mapper/isw_chjbfeec_DougRaid1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(sda,msdos1)' search --no-floppy --fs-uuid --set=root C89C73D19C73B910 chainloader +1 } ### END /etc/grub.d/30_os-prober_proxy ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- ====================== isw_chjbfeec_DougRaid5/etc/fstab: ======================= -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/isw_chjbfeec_DougRaid5 / ext4 errors=remount-ro 0 1 /dev/mapper/isw_chjbfeec_DougRaid6 none swap sw 0 0 -------------------------------------------------------------------------------- ========== isw_chjbfeec_DougRaid5: Location of files loaded by Grub: =========== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-23-generic-pae 2 = boot/initrd.img-3.2.0-24-generic-pae 2 = boot/vmlinuz-3.2.0-23-generic-pae 1 = boot/vmlinuz-3.2.0-24-generic-pae 1 = initrd.img 2 = initrd.img.old 2 = vmlinuz 1 = vmlinuz.old 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda1 Unknown BootLoader on sda2 Unknown BootLoader on sda3 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt hexdump: /dev/sda1: No such file or directory hexdump: /dev/sda1: No such file or directory hexdump: /dev/sda2: No such file or directory hexdump: /dev/sda2: No such file or directory hexdump: /dev/sda3: No such file or directory hexdump: /dev/sda3: No such file or directory xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in How we can see the Windows part at grub is: menuentry "Windows 7 (loader) (on /dev/mapper/isw_chjbfeec_DougRaid1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(sda,msdos1)' search --no-floppy --fs-uuid --set=root C89C73D19C73B910 chainloader +1 } I tried a lot of combinations at the line: set root='(sda,msdos1)' , but no success I tried to change uuid to the /dev/mapper/isw_chjbfeec_DougRaid2 uuid, but the grub reports a error. I dont know what to do now. I really need to boot my windows partition. Someone knows what to do? Thanks........

    Read the article

  • Oracle on Oracle: Is that all?

    - by Darin Pendergraft
    On October 17th, I posted a short blog and a podcast interview with Chirag Andani, talking about how Oracle IT uses its own IDM products. Blog link here. In response, I received a comment from reader Jaime Cardoso ([email protected]) who posted: “- You could have talked about how by deploying Oracle's Open standards base technology you were able to integrate any new system in your infrastructure in days. - You could have talked about how by deploying federation you were enabling the business side to keep all their options open in terms of companies to buy and sell while maintaining perfect employee and customer's single view. - You could have talked about how you are now able to cut response times to your audit and security teams into 1/10th of your former times Instead you spent 6 minutes talking about single sign on and self provisioning? If I didn't knew your IDM offer so well I would now be wondering what its differences from Microsoft's offer was. Sorry for not giving a positive comment here but, please your IDM suite is very good and, you simply aren't promoting it well enough” So I decided to send Jaime a note asking him about his experience, and to get his perspective on what makes the Oracle products great. What I found out is that Jaime is a very experienced IDM Architect with several major projects under his belt. Darin Pendergraft: Can you tell me a bit about your experience? How long have you worked in IT, and what is your IDM experience? Jaime Cardoso: I started working in "serious" IT in 1998 when I became Netscape's technical specialist in Portugal. Netscape Portugal didn't exist so, I was working for their VAR here. Most of my work at the time was with Netscape's mail server and LDAP server. Since that time I've been bouncing between the system's side like Sun resellers, Solaris stuff and even worked with Sun's Engineering in the making of an Hierarchical Storage Product (Sun CIS if you know it) and the application's side, mostly in LDAP and IDM. Over the years I've been doing support, service delivery and pre-sales / architecture design of IDM solutions in most big customers in Portugal, to name a few projects: - The first European deployment of Sun Access Manager (SAPO – Portugal Telecom) - The identity repository of 5/5 of the Biggest Portuguese banks - The Portuguese government federation of services project DP: OK, in your blog response, you mentioned 3 topics: 1. Using Oracle's standards based architecture; (you) were able to integrate any new system in days: can you give an example? What systems, how long did it take, number of apps/users/accounts/roles etc. JC: It's relatively easy to design a user management strategy for a static environment, or if you simply assume that you're an <insert vendor here> shop and all your systems will bow to that vendor's will. We've all seen that path, the use of proprietary technologies in interoperability solutions but, then reality kicks in. As an ISP I recall that I made the technical decision to use Active Directory as a central authentication system for the entire IT infrastructure. Clients, systems, apps, everything was there. As a good part of the systems and apps were running on UNIX, then a connector became needed in order to have UNIX boxes to authenticate against AD. And, that strategy worked but, each new machine required the component to be installed, monitoring had to be made for that component and each new app had to be independently certified. A self care user portal was an ongoing project, AD access assumes the client is inside the domain, something the ISP's customers (and UNIX boxes) weren't nor had any intention of ever being. When the Windows 2008 rollout was done, Microsoft changed the Active Directory interface. The Windows administrators didn't have enough know-how about directories and the way systems outside the MS world behaved so, on the go live, things weren't properly tested and a general outage followed. Several hours and 1 roll back later, everything was back working. But, the ISP still had to change all of its applications to work with the new access methods and reset the effort spent on the self service user portal. To keep with the same strategy, they would also have to trust Microsoft not to change interfaces again. Simply by putting up an Oracle LDAP server in the middle and replicating the user info from the AD into LDAP, most of the problems went away. Even systems for which no AD connector existed had PAM in them so, integration was made at the OS level, fully supported by the OS supplier. Sun Identity Manager already had a self care portal, combined with a user workflow so, all the clearances had to be given before the account was created or updated. Adding a new system as a client for these authentication services was simply a new checkbox in the OS installer and, even True64 systems were, for the first time integrated also with a 5 minute work of a junior system admin. True, all the windows clients and MS apps still went to the AD for their authentication needs so, from the start everybody knew that they weren't 100% free of migration pains but, now they had a single point of problems to look at. If you're looking for numbers: - 500K directory entries (users) - 2-300 systems After the initial setup, I personally integrated about 20 systems / apps against LDAP in 1 day while being watched by the different IT teams. The internal IT staff did the rest. DP: 2. Using Federation allows the business to keep options open for buying and selling companies, and yet maintain a single view for both employee and customer. What do you mean by this? Can you give an example? JC: The market is dynamic. The company that's being bought today tomorrow will be sold again. Companies that spread on different markets may see the regulator forcing a sale of part of a company due to monopoly reasons and companies that are in multiple countries have to comply with different legislations. Our job, as IT architects, while addressing the customers and employees authentication services, is quite hard and, quite contrary. On one hand, we need to give access to all of our employees to the relevant systems, apps and resources and, we already have marketing talking with us trying to find out who's a customer of the bough company but not from ours to address. On the other hand, we have to do that and keep in mind we may have to break up all that effort and that different countries legislation may became a problem with a full integration plan. That's a job for user Federation. you don't want to be the one who's telling your President that he will sell that business unit without it's customer's database (making the deal worth a lot less) or that the buyer will take with him a copy of your entire customer's database. Federation enables you to start controlling permissions to users outside of your traditional authentication realm. So what if the people of that company you just bought are keeping their old logins? Do you want, because of that, to have a dedicated system for their expenses reports? And do you want to keep their sales (and pre-sales) people out of the loop in terms of your group's path? Control the information flow, establish a Federation trust circle and give access to your apps to users that haven't (yet?) been brought into your internal login systems. You can still see your users in a unified view, you obviously control if a user has access to any particular application, either that user is in your local database or stored in a directory on the other side of the world. DP: 3. Cut response times of audit and security teams to 1/10. Is this a real number? Can you give an example? JC: No, I don't have any backing for this number. One of the companies I did system Administration for has a SOX compliance policy in place (I remind you that I live in Portugal so, this definition of SOX may be somewhat different from what you're used to) and, every time the audit team says they'll do another audit, we have to negotiate with them the size of the sample and we spend about 15 man/days gathering all the required info they ask. I did some work with Sun's Identity auditor and, from what I've been seeing, Oracle's product is even better and, I've seen that most of the information they ask would have been provided in a few hours with the help of this tool. I do stand by what I said here but, to be honest, someone from Identity Auditor team would do a much better job than me explaining this time savings. Jaime is right: the Oracle IDM products have a lot of business value, and Oracle IT is using them for a lot more than I was able to cover in the short podcast that I posted. I want to thank Jaime for his comments and perspective. We want these blog posts to be informative and honest – so if you have feedback for the Oracle IDM team on any topic discussed here, please post your comments below.

    Read the article

  • Java JRE 1.7.0_60 Certified with Oracle E-Business Suite

    - by Steven Chan (Oracle Development)
    Java Runtime Environment 7u60 (a.k.a. JRE 7u60-b19) and later updates on the JRE 7 codeline are now certified with Oracle E-Business Suite Release 11i and 12.0, 12.1, and 12.2 for Windows-based desktop clients. Effects of new support dates on Java upgrades for EBS environments Support dates for the E-Business Suite and Java have changed.  Please review the sections below for more details: What does this mean for Oracle E-Business Suite users? Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? All JRE 6 and 7 releases are certified with EBS upon release Our standard policy is that all E-Business Suite customers can apply all JRE updates to end-user desktops from JRE 1.6.0_03 and later updates on the 1.6 codeline, and from JRE 7u10 and later updates on the JRE 7 codeline.  We test all new JRE 1.6 and JRE 7 releases in parallel with the JRE development process, so all new JRE 1.6 and 7 releases are considered certified with the E-Business Suite on the same day that they're released by our Java team.  You do not need to wait for a certification announcement before applying new JRE 1.6 or JRE 7 releases to your EBS users' desktops. What's new in JRE 1.7.0_60? JDK 7u60 contains IANA time zone data version 2014b. For more information, refer to Timezone Data Versions in the JRE Software. It is strongly recommended that all customers upgrade to this release.  Details about update in this release are listed in the release notes. 32-bit and 64-bit versions certified This certification includes both the 32-bit and 64-bit JRE versions for various Windows operating systems. See the respective Recommended Browser documentation for your EBS release for details. Where are the official patch requirements documented? All patches required for ensuring full compatibility of the E-Business Suite with JRE 7 are documented in these Notes: For EBS 11i: Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 11i (Note 290807.1) Upgrading Developer 6i with Oracle E-Business Suite 11i (Note 125767.1) For EBS 12.0, 12.1, 12.2 Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12 (Note 393931.1) Upgrading OracleAS 10g Forms and Reports in Oracle E-Business Suite Release 12 (Note 437878.1) EBS + Discoverer 11g Users JRE 1.7.0_60 is certified for Discoverer 11g in E-Business Suite environments with the following minimum requirements: Discoverer (11g) 11.1.1.6 plus Patch 13877486 and later  Reference: How To Find Oracle BI Discoverer 10g and 11g Certification Information (Document 233047.1) Worried about the 'mismanaged session cookie' issue? No need to worry -- it's fixed.  To recap: JRE releases 1.6.0_18 through 1.6.0_22 had issues with mismanaging session cookies that affected some users in some circumstances. The fix for those issues was first included in JRE 1.6.0_23. These fixes will carry forward and continue to be fixed in all future JRE releases on the JRE 6 and 7 codelines.  In other words, if you wish to avoid the mismanaged session cookie issue, you should apply any release after JRE 1.6.0_22 on the JRE 6 codeline, and JRE 7u10 and later JRE 7 codeline updates. Implications of Java 6 End of Public Updates for EBS Users The Support Roadmap for Oracle Java is published here: Oracle Java SE Support Roadmap The latest updates to that page (as of Sept. 19, 2012) state (emphasis added): Java SE 6 End of Public Updates Notice After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. Existing Java SE 6 downloads already posted as of February 2013 will remain accessible in the Java Archive on Oracle Technology Network. Developers and end-users are encouraged to update to more recent Java SE versions that remain available for public download. For enterprise customers, who need continued access to critical bug fixes and security fixes as well as general maintenance for Java SE 6 or older versions, long term support is available through Oracle Java SE Support . What does this mean for Oracle E-Business Suite users? EBS users fall under the category of "enterprise users" above.  Java is an integral part of the Oracle E-Business Suite technology stack, so EBS users will continue to receive Java SE 6 updates from February 2013 to the end of Java SE 6 Extended Support in June 2017. In other words, nothing changes for EBS users after February 2013.  EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6 until the end of Java SE 6 Extended Support in June 2017. How can EBS customers obtain Java 6 updates after the public end-of-life? EBS customers can download Java 6 patches from My Oracle Support.  For a complete list of all Java SE patch numbers, see: All Java SE Downloads on MOS (Note 1439822.1) Both JDK and JRE packages are contained in a single combined download after 6u45.  Download the "JDK" package for both the desktop client JRE and the server-side JDK package.  Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? This upgrade is highly recommended but remains optional while Java 6 is covered by Extended Support. Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JRE 6 desktop clients.  Java 6 is covered by Extended Support until June 2017.  All E-Business Suite customers must upgrade to JRE 7 by June 2017. Coexistence of JRE 6 and JRE 7 on Windows desktops The upgrade to JRE 7 is highly recommended for EBS users, but some users may need to run both JRE 6 and 7 on their Windows desktops for reasons unrelated to the E-Business Suite. Most EBS configurations with IE and Firefox use non-static versioning by default. JRE 7 will be invoked instead of JRE 6 if both are installed on a Windows desktop. For more details, see "Appendix B: Static vs. Non-static Versioning and Set Up Options" in Notes 290807.1 and 393931.1. Applying Updates to JRE 6 and JRE 7 to Windows desktops Auto-update will keep JRE 7 up-to-date for Windows users with JRE 7 installed. Auto-update will only keep JRE 7 up-to-date for Windows users with both JRE 6 and 7 installed.  JRE 6 users are strongly encouraged to apply the latest Critical Patch Updates as soon as possible after each release. The Jave SE CPUs will be available via My Oracle Support.  EBS users can find more information about JRE 6 and 7 updates here: Information Center: Installation & Configuration for Oracle Java SE (Note 1412103.2) The dates for future Java SE CPUs can be found on the Critical Patch Updates, Security Alerts and Third Party Bulletin.  An RSS feed is available on that site for those who would like to be kept up-to-date. What do Mac users need? Mac users running Mac OS X 10.9 can run JRE 7 plug-ins.  See this article: EBS Release 12 Certified with Mac OS X 10.9 with Safari 7 and JRE 7 Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? JRE is used for desktop clients.  JDK is used for application tier servers JDK upgrades for E-Business Suite application tier servers are highly recommended but currently remain optional while Java 6 is covered by Extended Support. Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JDK 6 for application tier servers.  Java SE 6 is covered by Extended Support until June 2017.  All EBS customers with application tier servers on Windows, Solaris, and Linux must upgrade to JDK 7 by June 2017. EBS customers running their application tier servers on other operating systems should check with their respective vendors for the support dates for those platforms. JDK 7 is certified with E-Business Suite 12.  See: Java (JDK) 7 Certified for E-Business Suite 12.0 and 12.1 Servers Java (JDK) 7 Certified with E-Business Suite 12.2 Servers References Recommended Browsers for Oracle Applications 11i (Metalink Note 285218.1) Upgrading Sun JRE (Native Plug-in) with Oracle Applications 11i for Windows Clients (Metalink Note 290807.1) Recommended Browsers for Oracle Applications 12 (MetaLink Note 389422.1) Upgrading JRE Plugin with Oracle Applications R12 (MetaLink Note 393931.1) Related Articles Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23 Roundup: Oracle JInitiator 1.3 Desupported for EBS Customers in July 2009

    Read the article

  • ASMLib

    - by wcoekaer
    Oracle ASMlib on Linux has been a topic of discussion a number of times since it was released way back when in 2004. There is a lot of confusion around it and certainly a lot of misinformation out there for no good reason. Let me try to give a bit of history around Oracle ASMLib. Oracle ASMLib was introduced at the time Oracle released Oracle Database 10g R1. 10gR1 introduced a very cool important new features called Oracle ASM (Automatic Storage Management). A very simplistic description would be that this is a very sophisticated volume manager for Oracle data. Give your devices directly to the ASM instance and we manage the storage for you, clustered, highly available, redundant, performance, etc, etc... We recommend using Oracle ASM for all database deployments, single instance or clustered (RAC). The ASM instance manages the storage and every Oracle server process opens and operates on the storage devices like it would open and operate on regular datafiles or raw devices. So by default since 10gR1 up to today, we do not interact differently with ASM managed block devices than we did before with a datafile being mapped to a raw device. All of this is without ASMLib, so ignore that one for now. Standard Oracle on any platform that we support (Linux, Windows, Solaris, AIX, ...) does it the exact same way. You start an ASM instance, it handles storage management, all the database instances use and open that storage and read/write from/to it. There are no extra pieces of software needed, including on Linux. ASM is fully functional and selfcontained without any other components. In order for the admin to provide a raw device to ASM or to the database, it has to have persistent device naming. If you booted up a server where a raw disk was named /dev/sdf and you give it to ASM (or even just creating a tablespace without asm on that device with datafile '/dev/sdf') and next time you boot up and that device is now /dev/sdg, you end up with an error. Just like you can't just change datafile names, you can't change device filenames without telling the database, or ASM. persistent device naming on Linux, especially back in those days ways to say it bluntly, a nightmare. In fact there were a number of issues (dating back to 2004) : Linux async IO wasn't pretty persistent device naming including permissions (had to be owned by oracle and the dba group) was very, very difficult to manage system resource usage in terms of open file descriptors So given the above, we tried to find a way to make this easier on the admins, in many ways, similar to why we started working on OCFS a few years earlier - how can we make life easier for the admins on Linux. A feature of Oracle ASM is the ability for third parties to write an extension using what's called ASMLib. It is possible for any third party OS or storage vendor to write a library using a specific Oracle defined interface that gets used by the ASM instance and by the database instance when available. This interface offered 2 components : Define an IO interface - allow any IO to the devices to go through ASMLib Define device discovery - implement an external way of discovering, labeling devices to provide to ASM and the Oracle database instance This is similar to a library that a number of companies have implemented over many years called libODM (Oracle Disk Manager). ODM was specified many years before we introduced ASM and allowed third party vendors to implement their own IO routines so that the database would use this library if installed and make use of the library open/read/write/close,.. routines instead of the standard OS interfaces. PolyServe back in the day used this to optimize their storage solution, Veritas used (and I believe still uses) this for their filesystem. It basically allowed, in particular, filesystem vendors to write libraries that could optimize access to their storage or filesystem.. so ASMLib was not something new, it was basically based on the same model. You have libodm for just database access, you have libasm for asm/database access. Since this library interface existed, we decided to do a reference implementation on Linux. We wrote an ASMLib for Linux that could be used on any Linux platform and other vendors could see how this worked and potentially implement their own solution. As I mentioned earlier, ASMLib and ODMLib are libraries for third party extensions. ASMLib for Linux, since it was a reference implementation implemented both interfaces, the storage discovery part and the IO part. There are 2 components : Oracle ASMLib - the userspace library with config tools (a shared object and some scripts) oracleasm.ko - a kernel module that implements the asm device for /dev/oracleasm/* The userspace library is a binary-only module since it links with and contains Oracle header files but is generic, we only have one asm library for the various Linux platforms. This library is opened by Oracle ASM and by Oracle database processes and this library interacts with the OS through the asm device (/dev/asm). It can install on Oracle Linux, on SuSE SLES, on Red Hat RHEL,.. The library itself doesn't actually care much about the OS version, the kernel module and device cares. The support tools are simple scripts that allow the admin to label devices and scan for disks and devices. This way you can say create an ASM disk label foo on, currently /dev/sdf... So if /dev/sdf disappears and next time is /dev/sdg, we just scan for the label foo and we discover it as /dev/sdg and life goes on without any worry. Also, when the database needs access to the device, we don't have to worry about file permissions or anything it will be taken care of. So it's a convenience thing. The kernel module oracleasm.ko is a Linux kernel module/device driver. It implements a device /dev/oracleasm/* and any and all IO goes through ASMLib - /dev/oracleasm. This kernel module is obviously a very specific Oracle related device driver but it was released under the GPL v2 so anyone could easily build it for their Linux distribution kernels. Advantages for using ASMLib : A good async IO interface for the database, the entire IO interface is based on an optimal ASYNC model for performance A single file descriptor per Oracle process, not one per device or datafile per process reducing # of open filehandles overhead Device scanning and labeling built-in so you do not have to worry about messing with udev or devlabel, permissions or the likes which can be very complex and error prone. Just like with OCFS and OCFS2, each kernel version (major or minor) has to get a new version of the device drivers. We started out building the oracleasm kernel module rpms for many distributions, SLES (in fact in the early days still even for this thing called United Linux) and RHEL. The driver didn't make sense to get pushed into upstream Linux because it's unique and specific to the Oracle database. As it takes a huge effort in terms of build infrastructure and QA and release management to build kernel modules for every architecture, every linux distribution and every major and minor version we worked with the vendors to get them to add this tiny kernel module to their infrastructure. (60k source code file). The folks at SuSE understood this was good for them and their customers and us and added it to SLES. So every build coming from SuSE for SLES contains the oracleasm.ko module. We weren't as successful with other vendors so for quite some time we continued to build it for RHEL and of course as we introduced Oracle Linux end of 2006 also for Oracle Linux. With Oracle Linux it became easy for us because we just added the code to our build system and as we churned out Oracle Linux kernels whether it was for a public release or for customers that needed a one off fix where they also used asmlib, we didn't have to do any extra work it was just all nicely integrated. With the introduction of Oracle Linux's Unbreakable Enterprise Kernel and our interest in being able to exploit ASMLib more, we started working on a very exciting project called Data Integrity. Oracle (Martin Petersen in particular) worked for many years with the T10 standards committee and storage vendors and implemented Linux kernel support for DIF/DIX, data protection in the Linux kernel, note to those that wonder, yes it's all in mainline Linux and under the GPL. This basically gave us all the features in the Linux kernel to checksum a data block, send it to the storage adapter, which can then validate that block and checksum in firmware before it sends it over the wire to the storage array, which can then do another checksum and to the actual DISK which does a final validation before writing the block to the physical media. So what was missing was the ability for a userspace application (read: Oracle RDBMS) to write a block which then has a checksum and validation all the way down to the disk. application to disk. Because we have ASMLib we had an entry into the Linux kernel and Martin added support in ASMLib (kernel driver + userspace) for this functionality. Now, this is all based on relatively current Linux kernels, the oracleasm kernel module depends on the main kernel to have support for it so we can make use of it. Thanks to UEK and us having the ability to ship a more modern, current version of the Linux kernel we were able to introduce this feature into ASMLib for Linux from Oracle. This combined with the fact that we build the asm kernel module when we build every single UEK kernel allowed us to continue improving ASMLib and provide it to our customers. So today, we (Oracle) provide Oracle ASMLib for Oracle Linux and in particular on the Unbreakable Enterprise Kernel. We did the build/testing/delivery of ASMLib for RHEL until RHEL5 but since RHEL6 decided that it was too much effort for us to also maintain all the build and test environments for RHEL and we did not have the ability to use the latest kernel features to introduce the Data Integrity features and we didn't want to end up with multiple versions of asmlib as maintained by us. SuSE SLES still builds and comes with the oracleasm module and they do all the work and RHAT it certainly welcome to do the same. They don't have to rebuild the userspace library, it's really about the kernel module. And finally to re-iterate a few important things : Oracle ASM does not in any way require ASMLib to function completely. ASMlib is a small set of extensions, in particular to make device management easier but there are no extra features exposed through Oracle ASM with ASMLib enabled or disabled. Often customers confuse ASMLib with ASM. again, ASM exists on every Oracle supported OS and on every supported Linux OS, SLES, RHEL, OL withoutASMLib Oracle ASMLib userspace is available for OTN and the kernel module is shipped along with OL/UEK for every build and by SuSE for SLES for every of their builds ASMLib kernel module was built by us for RHEL4 and RHEL5 but we do not build it for RHEL6, nor for the OL6 RHCK kernel. Only for UEK ASMLib for Linux is/was a reference implementation for any third party vendor to be able to offer, if they want to, their own version for their own OS or storage ASMLib as provided by Oracle for Linux continues to be enhanced and evolve and for the kernel module we use UEK as the base OS kernel hope this helps.

    Read the article

  • Limiting TCP sends with a "to-be-sent" queue and other design issues.

    - by Poni
    Hello all! This question is the result of two other questions I've asked in the last few days. I'm creating a new question because I think it's related to the "next step" in my understanding of how to control the flow of my send/receive, something I didn't get a full answer to yet. The other related questions are: http://stackoverflow.com/questions/3028376/an-iocp-documentation-interpretation-question-buffer-ownership-ambiguity http://stackoverflow.com/questions/3028998/non-blocking-tcp-buffer-issues In summary, I'm using Windows I/O Completion Ports. I have several threads that process notifications from the completion port. I believe the question is platform-independent and would have the same answer as if to do the same thing on a *nix, *BSD, Solaris system. So, I need to have my own flow control system. Fine. So I send send and send, a lot. How do I know when to start queueing the sends, as the receiver side is limited to X amount? Let's take an example (closest thing to my question): FTP protocol. I have two servers; One is on a 100Mb link and the other is on a 10Mb link. I order the 100Mb one to send to the other one (the 10Mb linked one) a 1GB file. It finishes with an average transfer rate of 1.25MB/s. How did the sender (the 100Mb linked one) knew when to hold the sending, so the slower one wouldn't be flooded? Another way to ask this: Can I get a "hold-your-sendings" notification from the remote side? Is it built-in in TCP or the so called "reliable network protocol" needs me to do so? Again, I have a loop with many sends to a remote server, and at some point, within that loop I'll have to determine if I should queue that send or I can pass it on to the transport layer (TCP). How do I do that? What would you do? Of course that when I get a completion notification from IOCP that the send was done I'll issue other pending sends, that's clear. Another design question related to this: Since I am to use a custom buffers with a send queue, and these buffers are being freed to be reused (thus not using the "delete" keyword) when a "send-done" notification has been arrived, I'll have to use a mutual exlusion on that buffer pool. Using a mutex slows things down, so I've been thinking; Why not have each thread have its own buffers pool, thus accessing it , at least when getting the required buffers for a send operation, will require no mutex, because it belongs to that thread only. The buffers pool is located at the thread local storage (TLS) level. No mutual pool implies no lock needed, implies faster operations BUT also implies more memory used by the app, because even if one thread already allocated 1000 buffers, the other one that is sending right now and need 1000 buffers to send something will need to allocated these to its own. This is a long question and I hope none got hurt (: Thank you all!

    Read the article

  • What version-control system is most trivial to set up and use for toy projects?

    - by Norman Ramsey
    I teach the third required intro course in a CS department. One of my homework assignments asks students to speed up code they have written for a previous assignment. Factor-of-ten speedups are routine; factors of 100 or 1000 are not unheard of. (For a factor of 1000 speedup you have to have made rookie mistakes with malloc().) Programs are improved by a sequence is small changes. I ask students to record and describe each change and the resulting improvement. While you're improving a program it is also possible to break it. Wouldn't it be nice to back out? You can see where I'm going with this: my students would benefit enormously from version control. But there are some caveats: Our computing environment is locked down. Anything that depends on a central repository is suspect. Our students are incredibly overloaded. Not just classes but jobs, sports, music, you name it. For them to use a new tool it has to be incredibly easy and have obvious benefits. Our students do most work in pairs. Getting bits back and forth between accounts is problematic. Could this problem also be solved by distributed version control? Complexity is the enemy. I know setting up a CVS repository is too baffling---I myself still have trouble because I only do it once a year. I'm told SVN is even harder. Here are my comments on existing systems: I think central version control (CVS or SVN) is ruled out because our students don't have the administrative privileges needed to make a repository that they can share with one other student. (We are stuck with Unix file permissions.) Also, setup on CVS or SVN is too hard. darcs is way easy to set up, but it's not obvious how you share things. darcs send (to send patches by email) seems promising but it's not clear how to set it up. The introductory documentation for git is not for beginners. Like CVS setup, it's something I myself have trouble with. I'm soliciting suggestions for what source-control to use with beginning students. I suspect we can find resources to put a thin veneer over an existing system and to simplify existing documentation. We probably don't have resources to write new documentation. So, what's really easy to setup, commit, revert, and share changes with a partner but does not have to be easy to merge or to work at scale? A key constraint is that programming pairs have to be able to share work with each other and only each other, and pairs change every week. Our infrastructure is Linux, Solaris, and Windows with a netapp filer. I doubt my IT staff wants to create a Unix group for each pair of students. Is there an easier solution I've overlooked? (Thanks for the accepted answer, which beats the others on account of its excellent reference to Git Magic as well as the helpful comments.)

    Read the article

  • How to remove the hint in the terminal?

    - by jiangchengwu
    As a normal user , when I run some command like ps\netstat, the terminal hint me: (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) I know could redirect STDERR to /dev/null can remove this hint. But I want to know is there any way to remove it , such as edit some configuration files ? [deploy@storage2 ~]$ ps -V (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) procps version 3.2.7 [deploy@storage2 ~]$ ps -V 2>/dev/null procps version 3.2.7 My OS info: [deploy@storage2 ~]$ uname -a Linux storage2 2.6.18-243.el5 #1 SMP Mon Feb 7 18:47:27 EST 2011 x86_64 x86_64 x86_64 GNU/Linux [deploy@storage2 ~]$ lsb_release LSB Version: :core-3.1-amd64:core-3.1-ia32:core-3.1-noarch:graphics-3.1-amd64:graphics-3.1-ia32:graphics-3.1-noarch [deploy@storage2 ~]$ netstat -V (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) net-tools 1.60 netstat 1.42 (2001-04-15) Fred Baumgarten, Alan Cox, Bernd Eckenfels, Phil Blundell, Tuan Hoang and others +NEW_ADDRT +RTF_IRTT +RTF_REJECT +FW_MASQUERADE +I18N AF: (inet) +UNIX +INET +INET6 +IPX +AX25 +NETROM +X25 +ATALK +ECONET +ROSE HW: +ETHER +ARC +SLIP +PPP +TUNNEL +TR +AX25 +NETROM +X25 +FR +ROSE +ASH +SIT +FDDI +HIPPI +HDLC/LAPB There are more info from strace: [deploy@storage2 ~]$ strace ps -V execve("/bin/ps", ["ps", "-V"], [/* 27 vars */]) = 0 brk(0) = 0x929a000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=99752, ...}) = 0 mmap2(NULL, 99752, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7fde000 close(3) = 0 open("/lib/libnsl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \241\210\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=101404, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fdd000 mmap2(0x887000, 92104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x887000 mmap2(0x89a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12) = 0x89a000 mmap2(0x89c000, 6088, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x89c000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0Pzt\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=16428, ...}) = 0 mmap2(0x747000, 12408, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x747000 mmap2(0x749000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x749000 close(3) = 0 open("/lib/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\204p\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=208352, ...}) = 0 mmap2(0x705000, 155760, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x705000 mmap2(0x72a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x24) = 0x72a000 close(3) = 0 open("/lib/libcrypt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340\246q\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=45288, ...}) = 0 mmap2(0x71a000, 201020, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fab000 mmap2(0xf7fb4000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0xfffffffff7fb4000 mmap2(0xf7fb6000, 155964, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fb6000 close(3) = 0 open("/lib/libutil.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \n\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=13420, ...}) = 0 mmap2(NULL, 12428, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fa7000 mmap2(0xf7fa9000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xfffffffff7fa9000 close(3) = 0 open("/lib/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@(s\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=129716, ...}) = 0 mmap2(0x72e000, 90596, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x72e000 mmap2(0x741000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13) = 0x741000 mmap2(0x743000, 4580, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x743000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340?]\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1611564, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fa6000 mmap2(0x5be000, 1328580, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x5be000 mmap2(0x6fd000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13f) = 0x6fd000 mmap2(0x700000, 9668, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x700000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fa5000 set_thread_area(0xffd61bb4) = 0 mprotect(0x6fd000, 8192, PROT_READ) = 0 mprotect(0x741000, 4096, PROT_READ) = 0 mprotect(0xf7fa9000, 4096, PROT_READ) = 0 mprotect(0xf7fb4000, 4096, PROT_READ) = 0 mprotect(0x72a000, 4096, PROT_READ) = 0 mprotect(0x749000, 4096, PROT_READ) = 0 mprotect(0x89a000, 4096, PROT_READ) = 0 mprotect(0x5ba000, 4096, PROT_READ) = 0 munmap(0xf7fde000, 99752) = 0 set_tid_address(0xf7fa5708) = 20214 set_robust_list(0xf7fa5710, 0xc) = 0 futex(0xffd61f74, FUTEX_WAKE_PRIVATE, 1) = 0 rt_sigaction(SIGRTMIN, {0x4007323d0, [], 0}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x10000004007322e0, [], 0}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=-4284481536, rlim_max=67108864*1024}) = 0 uname({sys="Linux", node="storage2", ...}) = 0 readlink("/proc/self/exe", "/bin/ps"..., 260) = 7 brk(0) = 0x929a000 brk(0x92bb000) = 0x92bb000 open("/bin/ps", O_RDONLY|O_LARGEFILE) = 3 _llseek(3, -12, [711660], SEEK_END) = 0 read(3, "\274U!\253\2\0\0\0\224\237\t\0", 12) = 12 mmap2(NULL, 634880, PROT_READ, MAP_SHARED, 3, 0x13) = 0xfffffffff7f0a000 mmap2(NULL, 630784, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7e70000 close(3) = 0 futex(0x74a06c, FUTEX_WAKE_PRIVATE, 2147483647) = 0 geteuid32() = 501 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1696, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7ff6000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1696 read(3, "", 4096) = 0 close(3) = 0 munmap(0xf7ff6000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=99752, ...}) = 0 mmap2(NULL, 99752, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7fde000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\30\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=46680, ...}) = 0 mmap2(NULL, 41616, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7e65000 mmap2(0xf7e6e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0xfffffffff7e6e000 close(3) = 0 mprotect(0xf7e6e000, 4096, PROT_READ) = 0 munmap(0xf7fde000, 99752) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=2166, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7ff6000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2166 close(3) = 0 munmap(0xf7ff6000, 4096) = 0 mkdir("/tmp/pdk-deploy/", 0755) = -1 EEXIST (File exists) mkdir("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a", 0755) = -1 EEXIST (File exists) open("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a/libperl.so", O_RDONLY|O_LARGEFILE) = 3 close(3) = 0 open("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a/libperl.so", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300!\2\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0664, st_size=1264090, ...}) = 0 mmap2(NULL, 1140104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7d4e000 mmap2(0xf7e5a000, 45056, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10b) = 0xfffffffff7e5a000 close(3) = 0 rt_sigaction(SIGFPE, {0x1000000000000001, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|SA_SIGINFO|0x3d61cb8, (nil)}, {SIG_DFL, ~[HUP INT ILL ABRT BUS SEGV USR2 PIPE ALRM TERM STOP TSTP TTIN TTOU XCPU WINCH IO PWR SYS RTMIN RT_1 RT_2 RT_4 RT_5 RT_8 RT_9 RT_11 RT_12 RT_13 RT_16 RT_17 RT_18 RT_22 RT_24 RT_25 RT_26 RT_27 RT_28 RT_29 RT_30 RT_31], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 getuid32() = 501 geteuid32() = 501 getgid32() = 502 getegid32() = 502 open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=56454896, ...}) = 0 mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7b4e000 mmap2(NULL, 241664, PROT_READ, MAP_PRIVATE, 3, 0x13ec) = 0xfffffffff7b13000 mmap2(NULL, 4096, PROT_READ, MAP_PRIVATE, 3, 0x1466) = 0xfffffffff7b12000 close(3) = 0 mmap2(NULL, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7af1000 time(NULL) = 1348210009 readlink("/proc/self/exe", "/bin/ps"..., 4095) = 7 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 _llseek(0, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd618a8) = -1 EINVAL (Invalid argument) _llseek(1, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) ioctl(2, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd618a8) = -1 EINVAL (Invalid argument) _llseek(2, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) open("/dev/null", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61978) = -1 ENOTTY (Inappropriate ioctl for device) _llseek(3, 0, [0], SEEK_CUR) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 rt_sigaction(SIGCHLD, NULL, {SIG_DFL, [], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 brk(0x92dc000) = 0x92dc000 getppid() = 20212 stat64("/opt/ActivePerl-5.8/site/lib/sitecustomize.pl", 0xffd61560) = -1 ENOENT (No such file or directory) close(3) = 0 open("/usr/lib/.khostd/.hostconf", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61828) = -1 ENOTTY (Inappropriate ioctl for device) _llseek(3, 0, [0], SEEK_CUR) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=334, ...}) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 read(3, "bindport=9001\ntrustip=221.122.57"..., 4096) = 334 read(3, "", 4096) = 0 close(3) = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20215 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) fstat64(3, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 read(3, (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) "tcp 0 0 0.0.0.0:9001"..., 4096) = 109 read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- fstat64(3, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [TRAP BUS FPE USR1 CHLD CONT TTOU VTALRM IO RTMIN], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 waitpid(20215, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20215 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [TRAP BUS FPE USR1 CHLD CONT TTOU VTALRM IO RTMIN], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 chdir("/usr/lib/.khostd") = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20218 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|0x3d61850, (nil)}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 waitpid(20218, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20218 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 chdir("/home/deploy") = 0 stat64("/etc/cron.hourly/hichina", {st_mode=S_IFREG|0755, st_size=711660, ...}) = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20230 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) read(3, "procps version 3.2.7\n", 4096) = 21 read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|0x3d61850, (nil)}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 waitpid(20230, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20230 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 write(1, "procps version 3.2.7\n", 21procps version 3.2.7 ) = 21 munmap(0xf7af1000, 135168) = 0 munmap(0xf7e70000, 630784) = 0 munmap(0xf7f0a000, 634880) = 0 munmap(0xf7d4e000, 1140104) = 0 exit_group(0) = ? [ Process PID=20214 runs in 32 bit mode. ] Thank you very much.

    Read the article

  • top tweets WebLogic Partner Community – June 2012

    - by JuergenKress
    Send your tweets @wlscommunity #WebLogicCommunity and follow us at http://twitter.com/wlscommunity OTNArchBeat? Free Virtual Developer Day: Oracle ADF and Oracle Fusion Middleware Development http://bit.ly/MxuNAg AMIS, Oracle & Java? Checklist veearts nu ook op iPad. @amis_services Mobile integratie met Oracle Fusion Middleware http://dld.bz/buwsM #OSB #SOA WhitehorsesWhiteblog: Troubleshoot JVM crashes of Weblogic: CompilerThread (http://bit.ly/KcGzZK) Jon petter hjulstad E-vita is now Apps Grid Specialized! ODTUG Fusion Middleware Sessions RT @OTNArchBeat: ODTUG Kscope12 - June 24-28 - San Antonio, TX http://bit.ly/LlWkNV OTNArchBeat? Free Event: Modern #Java Development, in/outside the Enterprise - May 30 - Redwood Shores, CA http://bit.ly/LfB79a ADF Community DE? Oracle Advanced ADF 11g Partner Workshop Düsseldorf /Germany (english) June 26-29, click here to see Nicolas Lorain? Best Practices for #JavaFX 2 Enterprise Applications (Part Two) http://buff.ly/Lk1DBn by Jim Weaver shay shmeltzer? #Oracle Developers in #Israel - don't miss the free #ADF workshop July 2nd - get hands-on with Oracle ADF -here OTNArchBeat? Java at JAXconf | Tori Wieldt http://bit.ly/LdoLS2 Anand Akela? #Oracle Customers and Partners – Get your free pass to @CloudExpo in New York, June 11 to 14, http://goo.gl/RpYFT <- Stop by booth #511 OracleSupport_WLS? Did you know that since 3/15/12 #WebLogic Server 12.1.1.0 is certified for production with JDK 7? http://bit.ly/IYJE0L Sharat? Highly useful #JavaFX best practices blog by @JavaFXpert More details here ADF EMG How to set up a productive ADF Dev Env - discussion started by @baigsorcl. Click here to Read and comment. OracleSupport_WLS Upcoming #webcast: Diagnosing #weblogic performance issues through #java thread dumps http://bit.ly/M4O9qF My Oracle Support? New to Oracle Support? - Webcast on Support Basics webcast May 22 10:30 Central Europe. Register @ http://bit.ly/J8o0WG Mohamad Afshar? Cloud Expo – Oracle Customers and Partners – get your free pass to Cloud Expo in New York, June 11 to 14, http://goo.gl/RpYFT OTNArchBeat Oracle VM 3.1 is here | @Ronenkofman http://bit.ly/JriWTq Oracle Exalogic? RT @D0uglasPhillips: ExalogicTV New Video Introducing Oracle Secure Global Desktop for #Exalogic!! http://bit.ly/nwkrCu OracleBlogs? Java EE6 and WebLogic YouTube video channels http://ow.ly/1jVcYJ Oracle WebLogic RT @aleftik: Excited to spend some time today playing around with the WebSockets SDK http://bit.ly/NoTtri WebLogic Community Java EE6 and WebLogic YouTube video channels http://wp.me/p1LMIb-h0 OracleSupport_WLS New tutorial! How to use the #JMS #API to create a message producer with #GlassFish and #NetBeans http://bit.ly/Juqjn JDeveloper & ADF? Tip when installing JDeveloper 11.1.2.2.0 version http://dlvr.it/1b48s1 WebLogic Community Middleware Oracle Excellence Awards 2012 – HAPPY NEW YEAR! Click here to read WebLogicCommunity #opn #oracle#Specialization #opnaward Steven Davelaar? Improve performance of your ADF app using lazy, on-demand querying of detail view objects: Click here OracleBlogs? Middleware Oracle Excellence Awards 2012 & HAPPY NEW YEAR! http://ow.ly/1kahzZ OracleSupport_WLS Upgrading from #weblogic 9.2.x to 10.3.x? http://bit.ly/Kqzl9N AMIS, Oracle & Java “@JDeveloper: Logout from an ADF application http://dlvr.it/1fQBnm” WebLogic Community UK OUG call for papers–your middleware success! Click here #UKOUG #soacommunity #OPN Whitehorses Whiteblog: Enterprise Manager: Manage your Fusion Middleware logfiles (http://bit.ly/KQlZkR) WebLogic Community? @Jphjulstad HI Jon, should we send Pizza when you go in production with your WebLogic 12c project? Whish you success! #WebLogicCommunity Sabine Leitner ADF Einsteigerworkshops je 2 Tage im Juni in HAM, BLN, HANN #Oracle #WLS http://bit.ly/LcOIzB @OracleWebLogic @OracleAppGrid@soacommunity Andreas Koop new post Java Heap Monitor in JDeveloper http://bit.ly/LgSk85 Sabine Leitner? #Oracle Kundentag mit Vorträgen von Sparkasse, Schufa, LBBW, Allianz über FMW & Exa Lösungen! 21.06. FRA http://bit.ly/JtwE3v @wlscommunity NetBeans Team RT @chadlung: Installing and configuring #NetBeans 7.1.2 and the #Java JDK 1.7 on OS X: http://www.giantflyingsaucer.com/blog/p=3760 #osx WebLogic Community Happy New Year #WeblogicCommunity thanks for the business! Time for a drink http://pic.twitter.com/K34KFbvH WebLogic Community UK OUG call for papers&ndash;your middleware success! http://wp.me/p1LMIb-gU WebLogic Community? Middleware Oracle Excellence Awards 2012 - HAPPY NEW YEAR! http://wp.me/p1LMIb-h6 Oracle WebLogic? RT @wlscommunity: WebLogic World Record Two Processor Result with SPECjEnterprise2010 Benchmark Click here to read #weblogic #sunfire #li Marc? Relocate wlst script for all the logfiles in your domain @wlscommunity, http://tinyurl.com/btbjcco WebLogic Community WebLogic World Record Two Processor Result with SPECjEnterprise2010 Benchmark Click here #WebLogicCommunity #weblogic #sunfire Oracle WebLogic MIss a WebLogic Devcast webinar? Catch any of the replays in the series on-demand! #WebLogic #JavaEE #coherence http://bit.ly/LNGa4p JDeveloper & ADF? Bean DataControl - Edit table records http://dlvr.it/1ZWqCx Justin Kestelyn? Contents of "Virtual Developer Day: Java SE 7 and JavaFX 2.0" are now avail on demand; no reg http://tinyurl.com/78nxnyo Frank Nimphius? Preparing 12c new features for DOAG 2012 Development - June 14th in Bonn (http://development.doag.org) WebLogic Community? Middleware Oracle Excellence Awards 2012&ndash;HAPPY NEW YEAR! http://wp.me/p1LMIb-he JDeveloper & ADF Placeholder Watermarks with ADF 11.1.2 http://dlvr.it/1ZWDc9 Oracle ACE Program? May edition #ACE newsletter now available online. http://bit.ly/LKA2de chriscmuir New blog post: Which JDeveloper is right for me? http://bit.ly/J8sj9e GlassFish? Transactional Interceptors in Java EE 7 - Request for feedback: Linda described how EJB's container-managed tr http://bit.ly/KKuGNJ OracleEnterpriseMgr Oracle Application Testing Suite 12.1 Debuts at StarEast 2012 http://ow.ly/aXcv8 #em12c JAX London First set of speaker session announced for #JAXLondon see: http://bit.ly/L0HSME OTNArchBeat? Oracle Cloud Conference: dates and locations worldwide http://bit.ly/JgNeID NetBeans Team? Video: Create and debug a TestNG test class in #NetBeans IDE: http://ow.ly/b7NEW NetBeans Team #NetBeans tip: Code Template for #Kohana #PHP Framework: http://ow.ly/aWIvY Robin? Started to use the #Oracle #WebLogic Server #Maven Plugin. Really awesome to install a complete #WLS with "mvn wls:install" !@wlscommunity OTNArchBeat? Free Event: Modern #Java Development, in/outside the Enterprise - May 30 - Redwood Shores, CA http://bit.ly/JIN9tf OracleBlogs WebLogic Partner Community Newsletter May 2012 http://ow.ly/1k5TeG Java Certification? Java SE 7 Fundamentals course now available On Demand. Watch a preview now: http://ow.ly/aWYgD Whitehorses Whiteblog: Native IO in WebLogic on Solaris 11 X64 (http://bit.ly/KGM4mp) NetBeans Team? Quick video of FindBugs Integration in #NetBeans IDE 7.2: http://ow.ly/aNece NetBeans Team #JavaFX Scene Builder Docs Updated for 2.2 and #NetBeans 7.2 dev builds: http://ow.ly/b7Nie Duncan Mills? New blog posting on implementing input field watermarks with ADF Faces 11.1.2 Click here #adf WebLogic Community? WebLogic Partner Community Newsletter May 2012 http://wp.me/p1LMIb-h4 OracleBlogs? UK OUG call for papersyour middleware success! http://ow.ly/1jNs49 Nicolas Lorain? Java tip: Deploying #JavaFX apps to multiple environments - JavaWorld http://buff.ly/KDADvu Adam Bien? Java EE and How to Specify The Unconventional With Convention Over Configuration [Free Article]: The free http://bit.ly/JEUkUf Owen Hughes and team?#Oracle #Exalogic #Performance: What? How? Why? Click here GlassFish? SecuritEE in the Cloud: Java EE 7 and the Cloud theme continue to move full steam ahead. In a PaaS environment http://bit.ly/K2RPte JDeveloper & ADF? How to Align Managed Bean Scope and Bean Data Control in Oracle ADF http://dlvr.it/1dngxQ Andrejus Baranovskis Missing New Feature in JDev (11.1.2.2.0) - ADF Methods Security http://fb.me/1jQM1enls OracleSupport_WLS? Tutorial on managing #HTTP Sessions in a #Weblogic #Cluster http://bit.ly/JshESe Oracle WebLogic? ZeroTurnaround developer report: #Spring keeps getting heavier, and #Java EE keeps getting lighter http://bit.ly/JDmKy2 JDeveloper & ADF? How to Search in Views - Part 4 || Oracle ADF http://dlvr.it/1dpDjZ WebLogic Community Java Message Service with Java and Spring Framework on Oracle WebLogic; Webcast May 15th 2012 http://wp.me/p1LMIb-gS Andreas Koop? new post ADF Bug or Feature? Non-Breaking Space outside required icon style http://bit.ly/KDZnUo Oracle WebLogic? Don't miss this month's WebLogic DevCast: WebLogic JMS and Spring JMS http://bit.ly/J6g2ST Tuesday May 15th 10:00am PT JDeveloper & ADF How To Disable SELECT COUNT Execution for ADF Table Rendering http://dlvr.it/1dqKH6 OracleSupport_WLS? #SSL and security has its own Information Center, http://bit.ly/LP8Vil for troubleshooting, install, config and more NetBeans Team? Featured #NetBeans plugin is @Codename_One for creating native apps for major mobile platforms: http://plugins.netbeans.org/ JDeveloper & ADF? Using JDeveloper HTTP Analyser to intercept/forward requests http://dlvr.it/1Yzl4J Nicolas Lorain? Create native looks for JavaFX applications: JavaFX-CSS-Themes · http://buff.ly/M0jel0 by Gregg Setzer Devoxx? Want to make the world a better place? Then get involved in Random Hacks of Kindness on June 2 - 3 in Belgium @ http://www.rhok.be #RHoK WebLogic Community top tweets WebLogic Partner Community – May 2012 Click here #WebLogicCommunity Michel Schildmeijer Oracle Traffic Director 11g http://lnkd.in/-mm3Vy Andrejus Baranovskis? Proactively Monitoring JDeveloper 11g IDE Heap Memory http://fb.me/16YZErPrx Arun Gupta? 80+ attendees building a #javaee6 application using NetBeans/WebLogic at Java Day, Istanbul fun times! http://pic.twitter.com/odY19daW A. Chatziantoniou? Just registered for the Oracle FMW Summer Camp in Lisbon. Looking forward to learn, meet friends and try to buy ice cream on the beach OTNArchBeat Another Myth Debunked: 200 Continuous Redeployments with WebLogic|@munz http://bit.ly/JiPyM7 Oracle WebLogic? Need to learn more on #WebLogic Server #JVM performance tuning? http://bit.ly/MN UxHx GlassFish? Dukes Choice Awards 2012 Nominations Are Open: 2012 Duke's Choice Award are open for nominations. These awards http://bit.ly/Ksk4U3 Justin Kestelyn? Major cloud-related announcements from Larry Ellison and Mark Hurd on June 6 http://bit.ly/KTJiII Nicolas Lorain Transparent Windows (Stage) with #JavaFX 2 : Adam Bien's Weblog http://j.mp/INgq8K WebLogic Community Web Services with JAX and Spring on WebLogic–Webcast May 30th 2012 #WebLogicCommunity #weblogic #opn JDeveloper & ADF Oracle ADF - How to work with Dates http://dlvr.it/1Y70zw OracleBlogs Web Services with JAX and Spring on WebLogicWebcast May 30th 2012 http://ow.ly/1k2WtO Adam Bien? Summer Java EE Workshops: 23.05, Amsterdam Airport Java EE Hacking, Without Airport. The dutch version of Airport http://bit.ly/JeP6hV JDeveloper & ADF ADF 11g: BC4J or EJB3. http://bit.ly/JVVFZF ADF EMG? Great discussion with JSF guru Andy Schwartz on the forum - 38 posts! Check it out: here Devoxx? Oracle (http://www.oracle.com ) joins Devoxx 2012 as the first Premium partner, welcome aboard! Nicolas Lorain Developing a Simple Todo Application using #JavaFX, #Java and #MongoDB- Part-1JavaBeat http://j.mp/IDGxLA Nicolas Lorain Preview of JavaFX 2.2 canvas feature > Harmonic Code: Death bitmaps could be beautiful... Part I http://buff.ly/KyAXg5 #JavaFX OTNArchBeat?? New York Coherence Special Interest Group (NYCSIG) - May 24 - NYC http://bit.ly/JzJcbT WebLogic Community iAS upgrade to WebLogic watch #C2B2 online seminar http://youtu.be/5m2CNUjBIGQ #WebLogicCommunity Ruth Collett? Join Oracle in #Joburg on May 21 for OTN Developer Day - sessions on #Java #JavaEE 6/7 and much more! http://bit.ly/IENwnD WebLogic Community? Sending out invitations to our advanced Fusion Middleware Summer Camps! Want to learn more register for the community Ruth Collett? Join @ArunGupta in Istanbul this Monday to hear the latest on #JavaEE 6/7 http://bit.ly/Je63cc GlassFish? NetBeans 7.2 Beta - Built for Speed, Deploy Apps to Oracle Cloud: NetBeans 7.2 Beta is now available. The http://bit.ly/LxMMTK Lucas Jellema My latest SlideShare upload : Java ain't scary - introducing Java to PL/SQ. here via @slideshare JDeveloper & ADF? #Developer #free#ADF training in #Scotland - June 13. More information: http://bit.ly/LbPLlf AMIS, Oracle & Java? AMIS behaalt als eerste in Nedeland de Oracle ADF specialisatie - Channelworld nieuwsChannelconnect: http://bit.ly/JzAcB4 WebLogic Community Web Services with JAX and Spring on WebLogic&ndash;Webcast May 30th 2012 http://wp.me/p1LMIb-gX Nicolas Lorain?@ JavaFX-based SimpleDateFormat Demonstrator http://j.mp/KFCVOi #JavaFX via Dustin Marx Oracle Exalogic? Are you an Oracle partner? There's news on the Oracle Partner Network about #Exalogic specializations - http://bit.ly/Mt3ANY JDeveloper & ADF Shorter URL for your ADF application http://dlvr.it/1XqNLY OTNArchBeat? Bay Area Coherence Special Interest Group (BACSIG) Meeting June 7 http://bit.ly/JAa0Lx OTNArchBeat? Java EE 6 Sample Application on WebLogic 12c: Conference Planner | @arungupta http://bit.ly/LPvof4 JDeveloper & ADF? Excellent example of Oracle ADF - Google Maps/Earth integration http://dlvr.it/1cbc80 JDeveloper & ADF Setting Up JDeveloper's Embedded WLS for MySQL http://dlvr.it/1c4b8P JDeveloper & ADF? Solution for Sharing Global User Data in ADF BC http://dlvr.it/1cc7SJ Java? Java Magazine May/June #javaee #javafx #javame #openJDK #hotspot #wicket #lotsmore http://ow.ly/aX07v Oracle WebLogic? http://bit.ly/JxQsnS if you have trouble finding the right #patchset when doing an upgrade to your #weblogic server OracleEnterpriseMgr 15 minutes to go before we start our Application Testing Suite 12.1 webcast. http://bit.ly/JHyTEe Learn from the lead PM what's new. #em12c Sten Vesterli Eating your own dog food - Oracle support site finally in ADF: http://lnkd.in/s6hg_p Adam Bien Project: "Jenever" (=poison) checked-in with GIT:here CU at http://workshops.adam-bien.com. Thanks for attending! OTNArchBeat Web Service Development with NetBeans and Testing with WebLogic Admin Console | @munz http://bit.ly/JcWk34 Please feel free to send us your news! And add your blog to our SOA blog wiki

    Read the article

  • 12.04 upgrade broke grub? (not wubi related)

    - by kaare
    I just updated from 11.10 to 12.04, with no major problems (it took a while to get past a request to restart ssh, mysql and some other services, but I did no fiddling by myself, everything was done by the installer). However, after restarting, grub can't do anything. Picking the new linux installation (first entry), I just get error: no such partition error: no such partition error: no such partition and picking the recovery-version just gives 5 lines instead of 3. I have windows 7 installed on a different drive, and can run it by booting from that drive instead. Picking it from the grub menu gives the same error as above (can't remember how many lines, though). I'll be honest and say that I don't remember if win 7 could be booted from grub before the update, though. In short, nothing on the grub menu works. any solutions? The grub menu changed appearance - before it was on a purple background, small letters, now it's white-on-black, big letters, looking very basic. The original installation was from a usb-drive, and I hadn't heard about wubi until I started googling this problem, so I doubt there's any connection. I really hope there are some grub-savvy people out there :) EDIT: ok. so, I made a bootable usb, and am running from that right now. when I ran the bootinfoscript, it warned me that "gawk" could not be found, using "busybox awk" instead. This may lead to unreliable results. just so you know. The contents of RESULTS.txt are: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos3)/boot/grub on this drive. => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc. sda1: __________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /DELLBIO.BIN /DELLRMK.BIN /COMMAND.COM sda2: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda4: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /bootmgr /ntldr /NTDETECT.COM sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sdb3 and looks at sector 375893584 of the same hard drive for core.img. core.img is at this location and looks for (,msdos3)/boot/grub on this drive. Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb4: __________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdc1: __________________________________________ File system: ntfs Boot sector type: SYSLINUX 4.06 4.06-pre1 Boot sector info: Syslinux looks at sector 4649656 of /dev/sdc1 for its second stage. SYSLINUX is installed in the directory. The integrity check of the ADV area failed. No errors found in the Boot Parameter Block. Operating System: Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg /ldlinux.sys ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 240,974 240,912 de Dell Utility /dev/sda2 241,664 21,213,183 20,971,520 7 NTFS / exFAT / HPFS /dev/sda3 * 21,213,184 483,151,863 461,938,680 7 NTFS / exFAT / HPFS /dev/sda4 483,151,872 488,394,751 5,242,880 f W95 Extended (LBA) /dev/sda5 483,153,920 488,394,751 5,240,832 dd Dell Media Direct Drive: sdb _______________________________________ Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 63 345,886,749 345,886,687 7 NTFS / exFAT / HPFS /dev/sdb2 345,888,768 361,510,911 15,622,144 82 Linux swap / Solaris /dev/sdb3 * 361,510,912 390,807,786 29,296,875 83 Linux /dev/sdb4 390,809,600 488,394,751 97,585,152 83 Linux Drive: sdc _______________________________________ Disk /dev/sdc: 8015 MB, 8015282176 bytes 255 heads, 63 sectors/track, 974 cylinders, total 15654848 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 * 2,048 15,652,863 15,650,816 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07D8-0411 vfat DellUtility /dev/sda2 E2765BBC765B9061 ntfs RECOVERY /dev/sda3 98DC5E54DC5E2D2E ntfs OS /dev/sda5 7061-9DF5 vfat MEDIADIRECT /dev/sdb1 01CBBB4C3374C3B0 ntfs Data1 /dev/sdb2 1ca45f3f-f888-43d1-8137-02699597189a swap /dev/sdb3 6bc1b599-ad4b-403c-a155-a5bc81211f5e ext4 /dev/sdb4 58e2b257-8608-4b11-b20b-dc162bb80b62 ext4 /dev/sdc1 0C02B64402B63316 ntfs PENDRIVE ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sdb4 /media/58e2b257-8608-4b11-b20b-dc162bb80b62 ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sdc1 /cdrom fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096) ================================ sda5/boot.ini: ================================ [boot loader] timeout=0 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Embedded" /fastdetect /KERNEL=NTOSBOOT.EXE /maxmem=1024 =========================== sdb3/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux /boot/vmlinuz-3.2.0-24-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e echo 'Loading Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux /boot/vmlinuz-3.0.0-19-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-19-generic } menuentry 'Ubuntu, with Linux 3.0.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e echo 'Loading Linux 3.0.0-19-generic ...' linux /boot/vmlinuz-3.0.0-19-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-19-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set=root 98DC5E54DC5E2D2E chainloader +1 } menuentry "Microsoft Windows XP Embedded (on /dev/sda5)" --class windows --class os { insmod part_msdos insmod fat set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root 7061-9DF5 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb3/etc/fstab: ================================ # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb3 during installation UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e / ext4 errors=remount-ro 0 1 # /home was on /dev/sdb4 during installation UUID=58e2b257-8608-4b11-b20b-dc162bb80b62 /home ext4 defaults,user_xattr 0 2 # swap was on /dev/sdb2 during installation UUID=1ca45f3f-f888-43d1-8137-02699597189a none swap sw 0 0 =================== sdb3: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.0.0-19-generic 2 = boot/initrd.img-3.2.0-24-generic 2 = boot/vmlinuz-3.0.0-19-generic 2 = boot/vmlinuz-3.2.0-24-generic 1 = vmlinuz 1 = vmlinuz.old 2 =========================== sdc1/boot/grub/grub.cfg: =========================== if loadfont /boot/grub/font.pf2 ; then set gfxmode=auto insmod efi_gop insmod efi_uga insmod gfxterm terminal_output gfxterm fi set menu_color_normal=white/black set menu_color_highlight=black/light-gray menuentry "Try Ubuntu without installing" { set gfxpayload=keep linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- initrd /casper/initrd.lz } menuentry "Install Ubuntu" { set gfxpayload=keep linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash -- initrd /casper/initrd.lz } menuentry "Check disc for defects" { set gfxpayload=keep linux /casper/vmlinuz boot=casper integrity-check quiet splash -- initrd /casper/initrd.lz } ========================= sdc1/syslinux/syslinux.cfg: ========================== # D-I config version 2.0 include menu.cfg default vesamenu.c32 prompt 0 timeout 50 # If you would like to use the new menu and be presented with the option to install or run from USB at startup, remove # from the following line. This line was commented out (by request of many) to allow the old menu to be presented and to enable booting straight into the Live Environment! # ui gfxboot bootlogo =================== sdc1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) ?? = ?? boot/grub/grub.cfg 0 ================= sdc1: Location of files loaded by Syslinux: ================== GiB - GB File Fragment(s) ?? = ?? ldlinux.sys 1 ?? = ?? syslinux/chain.c32 1 ?? = ?? syslinux/gfxboot.c32 1 ?? = ?? syslinux/syslinux.cfg 0 ?? = ?? syslinux/vesamenu.c32 1 ============== sdc1: Version of COM32(R) files used by Syslinux: =============== syslinux/chain.c32 : COM32R module (v4.xx) syslinux/gfxboot.c32 : COM32R module (v4.xx) syslinux/vesamenu.c32 : COM32R module (v4.xx) =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in ./bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected

    Read the article

  • CodePlex Daily Summary for Thursday, May 17, 2012

    CodePlex Daily Summary for Thursday, May 17, 2012Popular ReleasesWatchersNET.UrlShorty: WatchersNET.UrlShorty 01.03.03: changes Fixed Url & Error History when urls contain line breaksAspxCommerce: AspxCommerce1.1: AspxCommerce - 'Flexible and easy eCommerce platform' offers a complete e-Commerce solution that allows you to build and run your fully functional online store in minutes. You can create your storefront; manage the products through categories and subcategories, accept payments through credit cards and ship the ordered products to the customers. We have everything set up for you, so that you can only focus on building your own online store. Note: To login as a superuser, the username and pass...SiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.1616.403): BUG FIX Hide save button when Titles or Descriptions element is selectedVisual C++ 2010 Directories Editor: Visual C++ 2010 Directories Editor (x32_x64): release v1.3MapWindow 6 Desktop GIS: MapWindow 6.1.2: Looking for a .Net GIS Map Application?MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial template. The extensions you create from the template can be loaded in MapWindow.DotSpatial: DotSpatial 1.2: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...Mugen Injection: Mugen Injection 2.2.1 (WinRT supported): Added ManagedScopeLifecycle. Increase performance. Added support for resolve 'params'.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.52: Make preprocessor comment-statements nestable; add the ///#IFNDEF statement. (Discussion #355785) Don't throw an error for old-school JScript event handlers, and don't rename them if they aren't global functions.DotNetNuke® Events: 06.00.00: This is a serious release of Events. DNN 6 form pattern - We have take the full route towards DNN6: most notably the incorporation of the DNN6 form pattern with streamlined UX/UI. We have also tried to change all formatting to a div based structure. A daunting task, since the Events module contains a lot of forms. Roger has done a splendid job by going through all the forms in great detail, replacing all table style layouts into the new DNN6 div class="dnnForm XXX" type of layout with chang...LogicCircuit: LogicCircuit 2.12.5.15: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionThis release is fixing one but nasty bug. Two functions XOR and XNOR when used with 3 or more inputs were incorrectly evaluating their results. If you have a circuit that is using these functions...SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8.1: Two fixes: Rar Decompression bug fixed. Error only occurred on some files Rar Decompression will throw an exception when another volume isn't found but one is expected.?????????? - ????????: All-In-One Code Framework ??? 2012-05-14: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ???OneCode??????,??????????6????Microsoft OneCode Sample,????2?Data Platform Sample?4?WPF Sample。???????????。 ????,?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 Data Platform Sample CSUseADO CppUseADO WPF Sample CSWPFMasterDetailBinding VBWPFMasterDetailBinding CSWPFThreading VBWPFThreading ....... ???????????blog: http://blog.csd...LINQ to Twitter: LINQ to Twitter Beta v2.0.25: Supports .NET 3.5, .NET 4.0, Silverlight 4.0, Windows Phone 7.1, Client Profile, and Windows 8. 100% Twitter API coverage. Also available via NuGet! Follow @JoeMayo.BlogEngine.NET: BlogEngine.NET 2.6: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info BlogEngine.NET Hosting - 3 months free! Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take...BlackJumboDog: Ver5.6.2: 2012.05.07 Ver5.6.2 (1) Web???????、????????·????????? (2) Web???????、?????????? COMSPEC PATHEXT WINDIR SERVERADDR SERVERPORT DOCUMENTROOT SERVERADMIN REMOTE_PORT HTTPACCEPTCHRSET HTTPACCEPTLANGUAGE HTTPACCEPTEXCODINGGardens Point Parser Generator: Gardens Point Parser Generator version 1.5.0: ChangesVersion 1.5.0 contains a number of changes. Error messages are now MSBuild and VS-friendly. The default encoding of the *.y file is Unicode, with an automatic fallback to the previous raw-byte interpretation. The /report option has been improved, as has the automaton tracing facility. New facilities are included that allow multiple parsers to share a common token type. A complete change-log is available as a separate documentation file. The source project has been upgraded to Visual...Media Companion: Media Companion 3.502b: It has been a slow week, but this release addresses a couple of recent bugs: Movies Multi-part Movies - Existing .nfo files that differed in name from the first part, were missed and scraped again. Trailers - MC attempted to scrape info for existing trailers. TV Shows Show Scraping - shows available only in the non-default language would not show up in the main browser. The correct language can now be selected using the TV Show Selector for a single show. General Will no longer prompt for ...NewLife XCode ??????: XCode v8.5.2012.0508、XCoder v4.7.2012.0320: X????: 1,????For .Net 4.0?? XCoder????: 1,???????,????X????,?????? XCode????: 1,Insert/Update/Delete???????????????,???SQL???? 2,IEntityOperate?????? 3,????????IEntityTree 4,????????????????? 5,?????????? 6,??????????????Google Book Downloader: Google Books Downloader Lite 1.0: Google Books Downloader Lite 1.0Python Tools for Visual Studio: 1.5 Alpha: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 Alpha. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including: • Supports Cpython, IronPython, Jython and Pypy • Python editor with advanced member, signature intellisense and refactoring • Code navigation: “Find all refs”, goto definition, and object browser • Local and remote debugging...New ProjectsAmlak: Amlak projectApparat: An Open Source Game/Simulation Engine made with C# and SlimDX.CarShop emulator: carshopDynaMaxx Server Backend: DynaMaxx Server BackendEntry-Level C# Password Generator: The Entry-Level C# Password Generator is a piece of software written for two purposes. To be kept as simple as possible for newcomers to the langauge to understand how to use the language and to help people make a new secure password for themselves.faccipractica: ESTA ES LA CAPA DE DATOSFACCIULEAM: ESTE ES UN PROYECTO DE PRACTICAFast C++ Math Expression Parser: The C++ Mathematical Expression Library (ExprTk) is a simple to use, easy to integrate and extremely efficient and fast mathematical expression parsing and evaluation engine. The parsing engine supports various kinds of functional and logic processing semantics and is very easily extendible.Font Data Catalog: A tool to store font dataGraffiti: Graffiti is a high-performance rendering engine built specifically for the Reach profile on top of XNA/Monogame with a very specific feature set * Support for the Reach profile * CPU/GPU vertex transformation (using SkinnedEffect) * Quake 3 shader style effects (Multi-pass) for anything Graffiti can render * Keyframed/procedural animation framework * Primitive rendering (antialiased, variable-sized points and lines) * Particle system using complex/primitive objects *Text rendering (w...homeland: A simple form Engine for Rails app.HTML5 for SharePoint 2010: HTML5 for SharePoint 2010 is a package of controls and webparts that allows using HTML5 controls in SharePoint. Image Cropper 4 Umbraco 5: Image cropper for Umbraco 5.IPickMovies: This is project for IPick Movies from Mezanmi Technologies.JFrame: jframeJustForTest: For Testkxcxw: This is a website project. Latence: projectLive: this is Live project.MASMYTEST: fdfMP3 player: Project for MUL.MSI Validation: MSI ValidationMyWp: wp applicationOpen Waves Activity Feed: Activity Feed component to be used in ASP.NET projects based on EPiServer CMS, SP, and other.pComboBox: Script ComboBox - Initial versions complete and functional ( current version is 1.54) program and documentation available on justcode.ca - http://www.justcode.ca/justwindowscode/ Source will be available at pcombobox.codeplex.com The basic functionality is shown in the below batch file to call this combobox was coded as follows pcombobox /p:one,"# two",three,4 /t:"title" echo %ERRORLEVEL% Basically you can call this combobox dialog window from a batch file or a vbscript an...Periodic.Net: Periodic.Net is a Periodic Table layout for Windows based on WPF and the .Net Framework 3.5 SP1, More info coming soon.Pob-Pong: A simple Pong game - the first Project of Elsor and Zakk.PodcastCasting: Podcast casting system for Podcasters that use voice talents in their storiesresolvendo.net: Projeto desenvolvido na 3 etapa do S2BSharepoint for TFS: Custom control to integrate files from Sharepoint to TFSShutdownAB: Windows service to shutdown computer after a backup.SSIS Restart Framework: A framework that provides restartability for SSIS 2012 projects. It is very much work in progress so at the current time, use at your own peril.Standalone Encrypted Sign In Library: The ECL library is a standalone connection library !stunserver: New version 1.1. This is the source code to STUNTMAN - an open source STUN server and client code by john selbie. Compliant with the latest RFCs including 5389, 5769, and 5780. Also includes backwards compatibility for RFC 3489. The stun server code is part of a larger personal project involving P2P file sharing and NAT traversal. Version 1.1 compiles on Linux, MacOS, BSD, and Solaris. Additional features are in development. www.stunprotocol.orgTask Scheduler Assistant: This is a very simple Windows service that watches folders/files and triggers an associated Scheduled Task accordingly. A simple * wildcard scheme is used for file triggers. Wildcards can only be in the filename and not in the path. This was initially built to be a Task Scheduler trigger from import processes from clients, providing the missing Trigger type from Window's Task Scheduler.Tech4WPF: Tech4WPF make it easier for developers to create technical applications. You will no longer have to create your own user controlls like knobs, gauges and simple charts. It's developed in C#/WPF. This project was inspirated by Qwt - Qt Widgets for Technical Applications http://qwt.sourceforge.net/. It's not port, but similar project, creating controls for technical aplications using .NET framework, WPF and all benefits of this platform like binding etc. Tech4WPF was created as a bachelo...TestProject_Git: git projectVS Templates for generating Duet Workspace sites: This project provides VS templates to easily create Duet Enterprise workspace sites.WinTest: This is a winform application. It need net framework 3.5 or higher version.WPF Progressive FizzBuzz Coding Assignment: Classic "FizzBuzz".YahalomProject: YahalomProject is for testing and using codeplex , tfs...Zorbo: Zorbo Server library was designed to add a unique twist to the Ares Galaxy P2P community. It features a large and detailed plugin architecture that allows developers to create rich chatroom experiences while being light-weight and fast.

    Read the article

  • How do i mount my SD Card? I am using ubuntu 10.04

    - by shobhit
    root@shobhit:/media# lsusb Bus 002 Device 017: ID 14cd:125c Super Top Bus 002 Device 003: ID 0c45:6421 Microdia Bus 002 Device 002: ID 8087:0020 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 011: ID 413c:8160 Dell Computer Corp. Bus 001 Device 006: ID 413c:8162 Dell Computer Corp. Bus 001 Device 005: ID 413c:8161 Dell Computer Corp. Bus 001 Device 004: ID 138a:0008 DigitalPersona, Inc Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 001 Device 002: ID 8087:0020 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@shobhit:/home/shobhit/scripts/internalUtilities# sudo lspci -v -nn 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20) Subsystem: Dell Device [1028:0441] Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fbc08000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel driver in use: ehci_hcd 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20) Subsystem: Dell Device [1028:0441] Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at fbc07000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) (prog-if 01) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=20, subordinate=20, sec-latency=32 Capabilities: [50] Subsystem: Dell Device [1028:0441] 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b0b] (rev 06) Subsystem: Dell Device [1028:0441] Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information <?> Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06) (prog-if 01) Subsystem: Dell Device [1028:0441] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 29 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at fbc06000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA <?> Capabilities: [b0] PCIe advanced features <?> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) Subsystem: Dell Device [1028:0441] Flags: medium devsel, IRQ 3 Memory at fbc05000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06) Subsystem: Dell Device [1028:0441] Flags: bus master, fast devsel, latency 0, IRQ 3 Memory at fbc04000 (64-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 3 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- 12:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4727] (rev 01) Subsystem: Dell Device [1028:0010] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fbb00000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information <?> Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number cb-c0-8b-ff-ff-38-00-00 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl 13:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) Subsystem: Dell Device [1028:0441] Flags: bus master, fast devsel, latency 0, IRQ 28 I/O ports at e000 [size=256] Memory at d0b04000 (64-bit, prefetchable) [size=4K] Memory at d0b00000 (64-bit, prefetchable) [size=16K] Expansion ROM at fba00000 [disabled] [size=128K] Capabilities: [40] Power Management version 3 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4 Capabilities: [cc] Vital Product Data <?> Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-e0-4c-68-00-00-00-03 Kernel driver in use: r8169 Kernel modules: r8169 root@shobhit:/home/shobhit/scripts/internalUtilities# sudo lshw shobhit description: Portable Computer product: Vostro 3500 vendor: Dell Inc. version: A10 serial: FV1L3N1 width: 32 bits capabilities: smbios-2.6 dmi-2.6 smp-1.4 smp configuration: boot=normal chassis=portable cpus=2 uuid=44454C4C-5600-1031-804C-C6C04F334E31 *-core description: Motherboard product: 0G2R51 vendor: Dell Inc. physical id: 0 version: A10 serial: .FV1L3N1.CN7016612H00PW. slot: To Be Filled By O.E.M. *-cpu:0 description: CPU product: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.5.5 serial: 0002-0655-0000-0000-0000-0000 slot: CPU 1 size: 1197MHz capacity: 2926MHz width: 64 bits clock: 533MHz capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida arat tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: id=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 64KiB capacity: 64KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 3MiB capacity: 3MiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 4.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 4.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 4.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 4.4 width: 64 bits capabilities: logical *-logicalcpu:4 description: Logical CPU physical id: 4.5 width: 64 bits capabilities: logical *-logicalcpu:5 description: Logical CPU physical id: 4.6 width: 64 bits capabilities: logical *-logicalcpu:6 description: Logical CPU physical id: 4.7 width: 64 bits capabilities: logical *-logicalcpu:7 description: Logical CPU physical id: 4.8 width: 64 bits capabilities: logical *-logicalcpu:8 description: Logical CPU physical id: 4.9 width: 64 bits capabilities: logical *-logicalcpu:9 description: Logical CPU physical id: 4.a width: 64 bits capabilities: logical *-logicalcpu:10 description: Logical CPU physical id: 4.b width: 64 bits capabilities: logical *-logicalcpu:11 description: Logical CPU physical id: 4.c width: 64 bits capabilities: logical *-logicalcpu:12 description: Logical CPU physical id: 4.d width: 64 bits capabilities: logical *-logicalcpu:13 description: Logical CPU physical id: 4.e width: 64 bits capabilities: logical *-logicalcpu:14 description: Logical CPU physical id: 4.f width: 64 bits capabilities: logical *-logicalcpu:15 description: Logical CPU physical id: 4.10 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 1d slot: System board or motherboard size: 3GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: HMT112S6TFR8C-H9 vendor: AD80 physical id: 0 serial: 5525C935 slot: DIMM_A size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: HMT125S6TFR8C-H9 vendor: AD80 physical id: 1 serial: 3441D6CA slot: DIMM_B size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A10 (10/25/2010) size: 64KiB capacity: 1984KiB capabilities: mca pci upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.5.5 serial: 0002-0655-0000-0000-0000-0000 size: 1197MHz capacity: 1197MHz capabilities: vmx ht cpufreq configuration: id=4 *-logicalcpu:0 description: Logical CPU physical id: 4.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 4.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 4.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 4.4 capabilities: logical *-logicalcpu:4 description: Logical CPU physical id: 4.5 capabilities: logical *-logicalcpu:5 description: Logical CPU physical id: 4.6 capabilities: logical *-logicalcpu:6 description: Logical CPU physical id: 4.7 capabilities: logical *-logicalcpu:7 description: Logical CPU physical id: 4.8 capabilities: logical *-logicalcpu:8 description: Logical CPU physical id: 4.9 capabilities: logical *-logicalcpu:9 description: Logical CPU physical id: 4.a capabilities: logical *-logicalcpu:10 description: Logical CPU physical id: 4.b capabilities: logical *-logicalcpu:11 description: Logical CPU physical id: 4.c capabilities: logical *-logicalcpu:12 description: Logical CPU physical id: 4.d capabilities: logical *-logicalcpu:13 description: Logical CPU physical id: 4.e capabilities: logical *-logicalcpu:14 description: Logical CPU physical id: 4.f capabilities: logical *-logicalcpu:15 description: Logical CPU physical id: 4.10 capabilities: logical *-pci description: Host bridge product: Core Processor DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 18 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 18 width: 64 bits clock: 33MHz capabilities: msi pm bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:30 memory:fac00000-faffffff memory:c0000000-cfffffff(prefetchable) ioport:f080(size=8) *-communication UNCLAIMED description: Communication controller product: 5 Series/3400 Series Chipset HECI Controller vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 06 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: latency=0 resources: memory:fbc09000-fbc0900f *-usb:0 description: USB Controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 06 width: 32 bits clock: 33MHz capabilities: pm debug bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:fbc08000-fbc083ff *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 06 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:22 memory:fbc00000-fbc03fff *-pci:0 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:24 ioport:2000(size=4096) memory:bc000000-bc1fffff memory:bc200000-bc3fffff(prefetchable) *-pci:1 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:25 ioport:3000(size=4096) memory:fbb00000-fbbfffff memory:bc400000-bc5fffff(prefetchable) *-network description: Wireless interface product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 logical name: eth1 version: 01 serial: c0:cb:38:8b:aa:d8 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 ip=10.0.1.50 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:fbb00000-fbb03fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:26 ioport:e000(size=4096) memory:fba00000-fbafffff ioport:d0b00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:13:00.0 logical name: eth0 version: 03 serial: 78:2b:cb:cc:0e:2a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:28 ioport:e000(size=256) memory:d0b04000-d0b04fff(prefetchable) memory:d0b00000-d0b03fff(prefetchable) memory:fba00000-fba1ffff(prefetchable) *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 5 vendor: Intel Corporation physical id: 1c.4 bus info: pci@0000:00:1c.4 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:27 ioport:d000(size=4096) memory:fb000000-fb9fffff ioport:d0000000(size=10485760) *-usb:1 description: USB Controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 06 width: 32 bits clock: 33MHz capabilities: pm debug bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fbc07000-fbc073ff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a6 width: 32 bits clock: 33MHz capabilities: pci bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 06 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 5 Series/3400 Series Chipset 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 06 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:29 ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=8) ioport:f040(size=4) ioport:f020(size=32) memory:fbc06000-fbc067ff *-disk description: ATA Disk product: WDC WD3200BEKT-7 vendor: Western Digital physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WX21AC0W1945 size: 298GiB (320GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=77e3ed41 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: aa69-51c0 size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2012-04-03 02:00:15 filesystem=ntfs label=System Reserved state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 9854ff5c-1dea-a147-84a6-624e758f44b8 size: 48GiB capacity: 48GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2012-04-10 13:55:31 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-volume:2 description: Extended partition physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 size: 48GiB capacity: 48GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 1952MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,barrier=1,data=ordered state=mounted *-volume:3 description: Windows NTFS volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 logical name: /media/56AA8094AA807273 version: 3.1 serial: 22a29e8d-56c7-9a4a-adea-528103948f6d size: 200GiB capacity: 200GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2012-04-02 20:17:15 filesystem=ntfs modified_by_chkdsk=true mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 mounted_on_nt4=true resize_log_file=true state=mounted upgrade_on_mount=true *-cdrom description: DVD-RAM writer product: DVD+-RW TS-L633J vendor: TSSTcorp physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: D200 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 06 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:fbc05000-fbc050ff ioport:f000(size=32) *-generic UNCLAIMED description: Signal processing controller product: 5 Series/3400 Series Chipset Thermal Subsystem vendor: Intel Corporation physical id: 1f.6 bus info: pci@0000:00:1f.6 version: 06 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: latency=0 resources: memory:fbc04000-fbc04fff *-scsi physical id: 2 bus info: usb@2:1.1 logical name: scsi15 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@15:0.0.0 logical name: /dev/sdb I have tried all options like fdisk /dev/sdb , pmount /dev/sdb but nothing is working .Pls guide me

    Read the article

< Previous Page | 80 81 82 83 84 85  | Next Page >